Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Linux 3.12-rc4

Browse source 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSUc9zAAoJEHm+PkMAQRiG9DMH/AtpuAF6LlMRPjrCeuJQ1pyh
 T0IUO+CsLKO6qtM5IyweP8V6zaasNjIuW1+B6IwVIl8aOrM+M7CwRiKvpey26ldM
 I8G2ron7hqSOSQqSQs20jN2yGAqQGpYIbTmpdGLAjQ350NNNvEKthbP5SZR5PAmE
 UuIx5OGEkaOyZXvCZJXU9AZkCxbihlMSt2zFVxybq2pwnGezRUYgCigE81aeyE0I
 QLwzzMVdkCxtZEpkdJMpLILAz22jN4RoVDbXRa2XC7dA9I2PEEXI9CcLzqCsx2Ii
 8eYS+no2K5N2rrpER7JFUB2B/2X8FaVDE+aJBCkfbtwaYTV9UYLq3a/sKVpo1Cs=
 =xSFJ
 -----END PGP SIGNATURE-----

Merge tag 'v3.12-rc4' into devel

Linux 3.12-rc4
This commit is contained in:
Linus Walleij 2013-10-08 13:27:11 +02:00
commit bfabb59433
938 changed files with 9187 additions and 5228 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
CREDITS
View file

@ -2808,8 +2808,7 @@ S: Ottawa, Ontario
S: Canada K2P 0X8
N: Mikael Pettersson
E: mikpe@it.uu.se
W: http://user.it.uu.se/~mikpe/linux/
E: mikpelinux@gmail.com
D: Miscellaneous fixes
N: Reed H. Petty

14
Documentation/arm64/tagged-pointers.txt
View file

@ -18,17 +18,17 @@ this byte for application use, with the following caveats:
parameters containing user virtual addresses *must* have
their top byte cleared before trapping to the kernel.
(2) Tags are not guaranteed to be preserved when delivering
signals. This means that signal handlers in applications
making use of tags cannot rely on the tag information for
user virtual addresses being maintained for fields inside
siginfo_t. One exception to this rule is for signals raised
in response to debug exceptions, where the tag information
(2) Non-zero tags are not preserved when delivering signals.
This means that signal handlers in applications making use
of tags cannot rely on the tag information for user virtual
addresses being maintained for fields inside siginfo_t.
One exception to this rule is for signals raised in response
to watchpoint debug exceptions, where the tag information
will be preserved.
(3) Special care should be taken when using tagged pointers,
since it is likely that C compilers will not hazard two
addresses differing only in the upper bits.
virtual addresses differing only in the upper byte.
The architecture prevents the use of a tagged PC, so the upper byte will
be set to a sign-extension of bit 55 on exception return.

2
Documentation/block/00-INDEX
View file

@ -6,6 +6,8 @@ capability.txt
- Generic Block Device Capability (/sys/block/<device>/capability)
cfq-iosched.txt
- CFQ IO scheduler tunables
cmdline-partition.txt
- how to specify block device partitions on kernel command line
data-integrity.txt
- Block data integrity
deadline-iosched.txt

8
Documentation/block/cmdline-partition.txt
View file

@ -1,9 +1,9 @@
Embedded device command line partition
Embedded device command line partition parsing
=====================================================================
Read block device partition table from command line.
The partition used for fixed block device (eMMC) embedded device.
It is no MBR, save storage space. Bootloader can be easily accessed
Support for reading the block device partition table from the command line.
It is typically used for fixed block (eMMC) embedded devices.
It has no MBR, so saves storage space. Bootloader can be easily accessed
by absolute address of data on the block device.
Users can easily change the partition.

10
Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
View file

@ -1,11 +1,11 @@
* Samsung Exynos specific extensions to the Synopsis Designware Mobile
* Samsung Exynos specific extensions to the Synopsys Designware Mobile
Storage Host Controller
The Synopsis designware mobile storage host controller is used to interface
The Synopsys designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core Synopsis dw mshc controller properties described
by synopsis-dw-mshc.txt and the properties used by the Samsung Exynos specific
extensions to the Synopsis Designware Mobile Storage Host Controller.
differences between the core Synopsys dw mshc controller properties described
by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
extensions to the Synopsys Designware Mobile Storage Host Controller.
Required Properties:

10
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
View file

@ -1,11 +1,11 @@
* Rockchip specific extensions to the Synopsis Designware Mobile
* Rockchip specific extensions to the Synopsys Designware Mobile
Storage Host Controller
The Synopsis designware mobile storage host controller is used to interface
The Synopsys designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core Synopsis dw mshc controller properties described
by synopsis-dw-mshc.txt and the properties used by the Rockchip specific
extensions to the Synopsis Designware Mobile Storage Host Controller.
differences between the core Synopsys dw mshc controller properties described
by synopsys-dw-mshc.txt and the properties used by the Rockchip specific
extensions to the Synopsys Designware Mobile Storage Host Controller.
Required Properties:

8
Documentation/devicetree/bindings/mmc/synopsis-dw-mshc.txt → Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
View file

@ -1,14 +1,14 @@
* Synopsis Designware Mobile Storage Host Controller
* Synopsys Designware Mobile Storage Host Controller
The Synopsis designware mobile storage host controller is used to interface
The Synopsys designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core mmc properties described by mmc.txt and the
properties used by the Synopsis Designware Mobile Storage Host Controller.
properties used by the Synopsys Designware Mobile Storage Host Controller.
Required Properties:
* compatible: should be
- snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
- snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
* #address-cells: should be 1.
* #size-cells: should be 0.

17
Documentation/devicetree/bindings/mmc/tmio_mmc.txt
View file

@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
optional bindings can be used.
Required properties:
- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
Optional properties:
- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
When used with Renesas SDHI hardware, the following compatibility strings
configure various model-specific properties:
"renesas,sh7372-sdhi": (default) compatible with SH7372
"renesas,r8a7740-sdhi": compatible with R8A7740: certain MMC/SD commands have to
wait for the interface to become idle.

18
Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
View file

@ -86,6 +86,7 @@ General Properties:
Clock Properties:
- fsl,cksel Timer reference clock source.
- fsl,tclk-period Timer reference clock period in nanoseconds.
- fsl,tmr-prsc Prescaler, divides the output clock.
- fsl,tmr-add Frequency compensation value.
@ -97,7 +98,7 @@ Clock Properties:
clock. You must choose these carefully for the clock to work right.
Here is how to figure good values:
TimerOsc = system clock MHz
TimerOsc = selected reference clock MHz
tclk_period = desired clock period nanoseconds
NominalFreq = 1000 / tclk_period MHz
FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
@ -114,6 +115,20 @@ Clock Properties:
Pulse Per Second (PPS) signal, since this will be offered to the PPS
subsystem to synchronize the Linux clock.
Reference clock source is determined by the value, which is holded
in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
value, which will be directly written in those bits, that is why,
according to reference manual, the next clock sources can be used:
<0> - external high precision timer reference clock (TSEC_TMR_CLK
input is used for this purpose);
<1> - eTSEC system clock;
<2> - eTSEC1 transmit clock;
<3> - RTC clock input.
When this attribute is not used, eTSEC system clock will serve as
IEEE 1588 timer reference clock.
Example:
ptp_clock@24E00 {
@ -121,6 +136,7 @@ Example:
reg = <0x24E00 0xB0>;
interrupts = <12 0x8 13 0x8>;
interrupt-parent = < &ipic >;
fsl,cksel = <1>;
fsl,tclk-period = <10>;
fsl,tmr-prsc = <100>;
fsl,tmr-add = <0x999999A4>;

2
Documentation/devicetree/bindings/pci/designware-pcie.txt
View file

@ -1,4 +1,4 @@
* Synopsis Designware PCIe interface
* Synopsys Designware PCIe interface
Required properties:
- compatible: should contain "snps,dw-pcie" to identify the

0
Documentation/devicetree/bindings/tty/serial/qca,ar9330-uart.txt → Documentation/devicetree/bindings/serial/qca,ar9330-uart.txt
View file

14
Documentation/filesystems/vfs.txt
View file

@ -359,11 +359,9 @@ struct inode_operations {
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
void (*update_time)(struct inode *, struct timespec *, int);
int (*atomic_open)(struct inode *, struct dentry *,
int (*atomic_open)(struct inode *, struct dentry *, struct file *,
unsigned open_flag, umode_t create_mode, int *opened);
int (*tmpfile) (struct inode *, struct dentry *, umode_t);
} ____cacheline_aligned;
struct file *, unsigned open_flag,
umode_t create_mode, int *opened);
};
Again, all methods are called without any locks being held, unless
@ -470,9 +468,11 @@ otherwise noted.
method the filesystem can look up, possibly create and open the file in
one atomic operation. If it cannot perform this (e.g. the file type
turned out to be wrong) it may signal this by returning 1 instead of
usual 0 or -ve . This method is only called if the last
component is negative or needs lookup. Cached positive dentries are
still handled by f_op->open().
usual 0 or -ve . This method is only called if the last component is
negative or needs lookup. Cached positive dentries are still handled by
f_op->open(). If the file was created, the FILE_CREATED flag should be
set in "opened". In case of O_EXCL the method must only succeed if the
file didn't exist and hence FILE_CREATED shall always be set on success.
tmpfile: called in the end of O_TMPFILE open(). Optional, equivalent to
atomically creating, opening and unlinking a file in given directory.

10
Documentation/kernel-parameters.txt
View file

@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Format: <io>,<irq>,<mode>
See header of drivers/net/hamradio/baycom_ser_hdx.c.
blkdevparts= Manual partition parsing of block device(s) for
embedded devices based on command line input.
See Documentation/block/cmdline-partition.txt
boot_delay= Milliseconds to delay each printk during boot.
Values larger than 10 seconds (10000) are changed to
no delay (0).
@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
pages. In the event, a node is too small to have both
kernelcore and Movable pages, kernelcore pages will
take priority and other nodes will have a larger number
of kernelcore pages. The Movable zone is used for the
of Movable pages. The Movable zone is used for the
allocation of pages that may be reclaimed or moved
by the page migration subsystem. This means that
HugeTLB pages may not be allocated from this zone.
@ -3485,6 +3489,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
the unplug protocol
never -- do not unplug even if version check succeeds
xen_nopvspin [X86,XEN]
Disables the ticketlock slowpath using Xen PV
optimizations.
xirc2ps_cs= [NET,PCMCIA]
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

6
Documentation/networking/bonding.txt
View file

@ -1362,6 +1362,12 @@ To add ARP targets:
To remove an ARP target:
# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
To configure the interval between learning packet transmits:
# echo 12 > /sys/class/net/bond0/bonding/lp_interval
NOTE: the lp_inteval is the number of seconds between instances where
the bonding driver sends learning packets to each slaves peer switch. The
default interval is 1 second.
Example Configuration
---------------------
We begin with the same example that is shown in section 3.3,

4
Documentation/scheduler/sched-design-CFS.txt
View file

@ -66,9 +66,7 @@ rq->cfs.load value, which is the sum of the weights of the tasks queued on the
runqueue.
CFS maintains a time-ordered rbtree, where all runnable tasks are sorted by the
p->se.vruntime key (there is a subtraction using rq->cfs.min_vruntime to
account for possible wraparounds). CFS picks the "leftmost" task from this
tree and sticks to it.
p->se.vruntime key. CFS picks the "leftmost" task from this tree and sticks to it.
As the system progresses forwards, the executed tasks are put into the tree
more and more to the right --- slowly but surely giving a chance for every task
to become the "leftmost task" and thus get on the CPU within a deterministic

6
Documentation/sound/alsa/HD-Audio-Models.txt
View file

@ -296,6 +296,12 @@ Cirrus Logic CS4206/4207
imac27 IMac 27 Inch
auto BIOS setup (default)
Cirrus Logic CS4208
===================
mba6 MacBook Air 6,1 and 6,2
gpio0 Enable GPIO 0 amp
auto BIOS setup (default)
VIA VT17xx/VT18xx/VT20xx
========================
auto BIOS setup (default)

40
MAINTAINERS
View file

@ -824,15 +824,21 @@ S: Maintained
F: arch/arm/mach-gemini/
ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
M: Barry Song <baohua.song@csr.com>
M: Barry Song <baohua@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
S: Maintained
F: arch/arm/mach-prima2/
F: drivers/clk/clk-prima2.c
F: drivers/clocksource/timer-prima2.c
F: drivers/clocksource/timer-marco.c
F: drivers/dma/sirf-dma.c
F: drivers/i2c/busses/i2c-sirf.c
F: drivers/input/misc/sirfsoc-onkey.c
F: drivers/irqchip/irq-sirfsoc.c
F: drivers/mmc/host/sdhci-sirf.c
F: drivers/pinctrl/sirf/
F: drivers/rtc/rtc-sirfsoc.c
F: drivers/spi/spi-sirf.c
ARM/EBSA110 MACHINE SUPPORT
@ -1812,7 +1818,8 @@ S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
M: Christian Daudt <csd@broadcom.com>
M: Christian Daudt <bcm@fixthebug.org>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://git.github.com/broadcom/bcm11351
S: Maintained
F: arch/arm/mach-bcm/
@ -2639,6 +2646,18 @@ F: include/linux/device-mapper.h
F: include/linux/dm-*.h
F: include/uapi/linux/dm-*.h
DIGI NEO AND CLASSIC PCI PRODUCTS
M: Lidza Louina <lidza.louina@gmail.com>
L: driverdev-devel@linuxdriverproject.org
S: Maintained
F: drivers/staging/dgnc/
DIGI EPCA PCI PRODUCTS
M: Lidza Louina <lidza.louina@gmail.com>
L: driverdev-devel@linuxdriverproject.org
S: Maintained
F: drivers/staging/dgap/
DIOLAN U2C-12 I2C DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: linux-i2c@vger.kernel.org
@ -4457,6 +4476,13 @@ L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/ioc3_serial.c
IOMMU DRIVERS
M: Joerg Roedel <joro@8bytes.org>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
S: Maintained
F: drivers/iommu/
IP MASQUERADING
M: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
S: Maintained
@ -6595,7 +6621,7 @@ S: Obsolete
F: drivers/net/wireless/prism54/
PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
M: Mikael Pettersson <mikpe@it.uu.se>
M: Mikael Pettersson <mikpelinux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: drivers/ata/sata_promise.*
@ -7258,9 +7284,9 @@ F: include/linux/sched.h
F: include/uapi/linux/sched.h
SCORE ARCHITECTURE
M: Chen Liqin <liqin.chen@sunplusct.com>
M: Chen Liqin <liqin.linux@gmail.com>
M: Lennox Wu <lennox.wu@gmail.com>
W: http://www.sunplusct.com
W: http://www.sunplus.com
S: Supported
F: arch/score/
@ -8724,9 +8750,8 @@ F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
USB/IP DRIVERS
M: Matt Mooney <mfm@muteddisk.com>
L: linux-usb@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/staging/usbip/
USB ISP116X DRIVER
@ -9366,6 +9391,7 @@ F: arch/arm64/include/asm/xen/
XEN NETWORK BACKEND DRIVER
M: Ian Campbell <ian.campbell@citrix.com>
M: Wei Liu <wei.liu2@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: netdev@vger.kernel.org
S: Supported

2
Makefile
View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 12
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc4
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*

3
arch/Kconfig
View file

@ -286,9 +286,6 @@ config HAVE_PERF_USER_STACK_DUMP
config HAVE_ARCH_JUMP_LABEL
bool
config HAVE_ARCH_MUTEX_CPU_RELAX
bool
config HAVE_RCU_TABLE_FREE
bool

9
arch/arc/include/asm/spinlock.h
View file

@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
__asm__ __volatile__(
" ex %0, [%1] \n"
: "+r" (tmp)
: "r"(&(lock->slock))
: "memory");
smp_mb();
}

4
arch/arc/include/asm/uaccess.h
View file

@ -43,7 +43,7 @@
* Because it essentially checks if buffer end is within limit and @len is
* non-ngeative, which implies that buffer start will be within limit too.
*
* The reason for rewriting being, for majorit yof cases, @len is generally
* The reason for rewriting being, for majority of cases, @len is generally
* compile time constant, causing first sub-expression to be compile time
* subsumed.
*
@ -53,7 +53,7 @@
*
*/
#define __user_ok(addr, sz) (((sz) <= TASK_SIZE) && \
(((addr)+(sz)) <= get_fs()))
((addr) <= (get_fs() - (sz))))
#define __access_ok(addr, sz) (unlikely(__kernel_ok) || \
likely(__user_ok((addr), (sz))))

25
arch/arc/kernel/signal.c
View file

@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
{
struct rt_sigframe __user *sf;
unsigned int magic;
int err;
struct pt_regs *regs = current_pt_regs();
/* Always make any pending restarted system calls return -EINTR */
@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
goto badframe;
err = restore_usr_regs(regs, sf);
err |= __get_user(magic, &sf->sigret_magic);
if (err)
if (__get_user(magic, &sf->sigret_magic))
goto badframe;
if (unlikely(is_do_ss_needed(magic)))
if (restore_altstack(&sf->uc.uc_stack))
goto badframe;
if (restore_usr_regs(regs, sf))
goto badframe;
/* Don't restart from sigreturn */
syscall_wont_restart(regs);
@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
if (!sf)
return 1;
/*
* w/o SA_SIGINFO, struct ucontext is partially populated (only
* uc_mcontext/uc_sigmask) for kernel's normal user state preservation
* during signal handler execution. This works for SA_SIGINFO as well
* although the semantics are now overloaded (the same reg state can be
* inspected by userland: but are they allowed to fiddle with it ?
*/
err |= stash_usr_regs(sf, regs, set);
/*
* SA_SIGINFO requires 3 args to signal handler:
* #1: sig-no (common to any handler)
@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
magic = MAGIC_SIGALTSTK;
}
/*
* w/o SA_SIGINFO, struct ucontext is partially populated (only
* uc_mcontext/uc_sigmask) for kernel's normal user state preservation
* during signal handler execution. This works for SA_SIGINFO as well
* although the semantics are now overloaded (the same reg state can be
* inspected by userland: but are they allowed to fiddle with it ?
*/
err |= stash_usr_regs(sf, regs, set);
err |= __put_user(magic, &sf->sigret_magic);
if (err)
return err;

7
arch/arc/kernel/time.c
View file

@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
{
struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
clk->cpumask = cpumask_of(cpu);
clockevents_register_device(clk);
clockevents_config_and_register(clk, arc_get_core_freq(),
0, ARC_TIMER_MAX);
/*
* setup the per-cpu timer IRQ handler - for all cpus

6
arch/arc/kernel/unaligned.c
View file

@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
regs->status32 &= ~STATUS_DE_MASK;
} else {
regs->ret += state.instr_len;
/* handle zero-overhead-loop */
if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
regs->ret = regs->lp_start;
regs->lp_count--;
}
}
return 0;

3
arch/arm/Kconfig
View file

@ -2217,8 +2217,7 @@ config NEON
config KERNEL_MODE_NEON
bool "Support for NEON in kernel mode"
default n
depends on NEON
depends on NEON && AEABI
help
Say Y to include support for NEON in kernel mode.

3
arch/arm/boot/dts/Makefile
View file

@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
bcm28155-ap.dtb
@ -183,6 +185,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
am43x-epos-evm.dtb

262
arch/arm/boot/dts/am335x-bone-common.dtsi Normal file
View file

@ -0,0 +1,262 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/ {
model = "TI AM335x BeagleBone";
compatible = "ti,am335x-bone", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&dcdc2_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
ocp {
uart0: serial@44e09000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
musb: usb@47400000 {
status = "okay";
control@44e10000 {
status = "okay";
};
usb-phy@47401300 {
status = "okay";
};
usb-phy@47401b00 {
status = "okay";
};
usb@47401000 {
status = "okay";
};
usb@47401800 {
status = "okay";
dr_mode = "host";
};
dma-controller@07402000 {
status = "okay";
};
};
i2c0: i2c@44e0b000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@24 {
reg = <0x24>;
};
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
compatible = "gpio-leds";
led@2 {
label = "beaglebone:green:heartbeat";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
/include/ "tps65217.dtsi"
&tps {
regulators {
dcdc1_reg: regulator@0 {
regulator-always-on;
};
dcdc2_reg: regulator@1 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1325000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3_reg: regulator@2 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
regulator-always-on;
};
ldo2_reg: regulator@4 {
regulator-always-on;
};
ldo3_reg: regulator@5 {
regulator-always-on;
};
ldo4_reg: regulator@6 {
regulator-always-on;
};
};
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "mii";
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
};

256
arch/arm/boot/dts/am335x-bone.dts
View file

@ -8,258 +8,4 @@
/dts-v1/;
#include "am33xx.dtsi"
/ {
model = "TI AM335x BeagleBone";
compatible = "ti,am335x-bone", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&dcdc2_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
ocp {
uart0: serial@44e09000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
musb: usb@47400000 {
status = "okay";
control@44e10000 {
status = "okay";
};
usb-phy@47401300 {
status = "okay";
};
usb-phy@47401b00 {
status = "okay";
};
usb@47401000 {
status = "okay";
};
usb@47401800 {
status = "okay";
dr_mode = "host";
};
dma-controller@07402000 {
status = "okay";
};
};
i2c0: i2c@44e0b000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@24 {
reg = <0x24>;
};
};
};
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
compatible = "gpio-leds";
led@2 {
label = "beaglebone:green:heartbeat";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
/include/ "tps65217.dtsi"
&tps {
regulators {
dcdc1_reg: regulator@0 {
regulator-always-on;
};
dcdc2_reg: regulator@1 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1325000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3_reg: regulator@2 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
regulator-always-on;
};
ldo2_reg: regulator@4 {
regulator-always-on;
};
ldo3_reg: regulator@5 {
regulator-always-on;
};
ldo4_reg: regulator@6 {
regulator-always-on;
};
};
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "mii";
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
};
#include "am335x-bone-common.dtsi"

17
arch/arm/boot/dts/am335x-boneblack.dts Normal file
View file

@ -0,0 +1,17 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
&ldo3_reg {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};

49
arch/arm/boot/dts/armada-370-netgear-rn102.dts
View file

@ -27,6 +27,25 @@
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* Connected to Marvell SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected to FL1009 USB 3.0 controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
@ -57,6 +76,11 @@
marvell,pins = "mpp56";
marvell,function = "gpio";
};
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
};
mdio {
@ -89,22 +113,6 @@
pwm_polarity = <0>;
};
};
pcie-controller {
status = "okay";
/* Connected to Marvell SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected to FL1009 USB 3.0 controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};
@ -160,7 +168,7 @@
button@1 {
label = "Power Button";
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 30 1>;
gpios = <&gpio1 30 0>;
};
button@2 {
@ -176,4 +184,11 @@
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
gpios = <&gpio0 8 1>;
};
};

11
arch/arm/boot/dts/armada-xp.dtsi
View file

@ -70,6 +70,8 @@
timer@20300 {
compatible = "marvell,armada-xp-timer";
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
};
coreclk: mvebu-sar@18230 {
@ -169,4 +171,13 @@
};
};
};
clocks {
/* 25 MHz reference crystal */
refclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
};

6
arch/arm/boot/dts/at91sam9x5.dtsi
View file

@ -190,12 +190,12 @@
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */
};
pinctrl_uart2_rts: uart2_rts-0 {
pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */
};
pinctrl_uart2_cts: uart2_cts-0 {
pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins =
<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */
};
@ -556,6 +556,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -567,6 +568,7 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";

12
arch/arm/boot/dts/atlas6.dtsi
View file

@ -181,6 +181,8 @@
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
sirf,uart-dma-rx-channel = <21>;
sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
@ -199,6 +201,8 @@
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
sirf,uart-dma-rx-channel = <6>;
sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
@ -206,7 +210,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
sirf,usp-dma-rx-channel = <17>;
sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
@ -214,7 +221,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
sirf,usp-dma-rx-channel = <14>;
sirf,usp-dma-tx-channel = <15>;
};
dmac0: dma-controller@b00b0000 {
@ -237,6 +247,8 @@
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
interrupts = <14>;
sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {

6
arch/arm/boot/dts/imx27.dtsi
View file

@ -187,7 +187,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
clocks = <&clks 53>, <&clks 53>;
clocks = <&clks 53>, <&clks 60>;
clock-names = "ipg", "per";
status = "disabled";
};
@ -198,7 +198,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
clocks = <&clks 52>, <&clks 52>;
clocks = <&clks 52>, <&clks 60>;
clock-names = "ipg", "per";
status = "disabled";
};
@ -309,7 +309,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
clocks = <&clks 51>, <&clks 51>;
clocks = <&clks 51>, <&clks 60>;
clock-names = "ipg", "per";
status = "disabled";
};

2
arch/arm/boot/dts/imx51.dtsi
View file

@ -474,7 +474,7 @@
compatible = "fsl,imx51-pata", "fsl,imx27-pata";
reg = <0x83fe0000 0x4000>;
interrupts = <70>;
clocks = <&clks 161>;
clocks = <&clks 172>;
status = "disabled";
};

4
arch/arm/boot/dts/imx6q-pinfunc.h
View file

@ -207,8 +207,8 @@
#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0 0x0c8 0x3dc 0x824 0x2 0x1
#define MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x0c8 0x3dc 0x924 0x4 0x1
#define MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0c8 0x3dc 0x000 0x4 0x0
#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c4 0x3dc 0x000 0x4 0x0
#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c4 0x3dc 0x924 0x4 0x1
#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x0c8 0x3dc 0x000 0x4 0x0
#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B 0x0c8 0x3dc 0x924 0x4 0x1
#define MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0c8 0x3dc 0x000 0x5 0x0
#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC 0x0c8 0x3dc 0x8e4 0x6 0x0
#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14 0x0c8 0x3dc 0x000 0x7 0x0

3
arch/arm/boot/dts/kirkwood.dtsi
View file

@ -13,6 +13,7 @@
cpu@0 {
device_type = "cpu";
compatible = "marvell,feroceon";
reg = <0>;
clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
clock-names = "cpu_clk", "ddrclk", "powersave";
};
@ -167,7 +168,7 @@
xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0xd0B00 0x100>;
0x60B00 0x100>;
status = "okay";
clocks = <&gate_clk 16>;

2
arch/arm/boot/dts/omap3-beagle-xm.dts
View file

@ -11,7 +11,7 @@
/ {
model = "TI OMAP3 BeagleBoard xM";
compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
cpus {
cpu@0 {

14
arch/arm/boot/dts/omap3-igep.dtsi
View file

@ -48,6 +48,15 @@
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
@ -93,6 +102,11 @@
clock-frequency = <400000>;
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;

46
arch/arm/boot/dts/omap4-panda-common.dtsi
View file

@ -107,6 +107,19 @@
*/
clock-frequency = <19200000>;
};
/* regulator for wl12xx on sdio5 */
wl12xx_vmmc: wl12xx_vmmc {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio2 11 0>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&omap4_pmx_wkup {
@ -235,6 +248,33 @@
0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
* REVISIT: Are the pull-ups needed for GPIO 48 and 49?
*/
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
&i2c1 {
@ -314,8 +354,12 @@
};
&mmc5 {
ti,non-removable;
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_pins>;
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
bus-width = <4>;
cap-power-off-card;
};
&emif1 {

39
arch/arm/boot/dts/omap4-sdp.dts
View file

@ -140,6 +140,19 @@
"DMic", "Digital Mic",
"Digital Mic", "Digital Mic1 Bias";
};
/* regulator for wl12xx on sdio5 */
wl12xx_vmmc: wl12xx_vmmc {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio2 22 0>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&omap4_pmx_wkup {
@ -295,6 +308,26 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
/* wl12xx GPIO output for WLAN_EN */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
&i2c1 {
@ -420,8 +453,12 @@
};
&mmc5 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_pins>;
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
bus-width = <4>;
ti,non-removable;
cap-power-off-card;
};
&emif1 {

7
arch/arm/boot/dts/omap5.dtsi
View file

@ -637,7 +637,7 @@
omap_dwc3@4a020000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss";
reg = <0x4a020000 0x1000>;
reg = <0x4a020000 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
@ -645,17 +645,18 @@
ranges;
dwc3@4a030000 {
compatible = "snps,dwc3";
reg = <0x4a030000 0x1000>;
reg = <0x4a030000 0x10000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
usb-phy = <&usb2_phy>, <&usb3_phy>;
tx-fifo-resize;
};
};
ocp2scp {
ocp2scp@4a080000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x4a080000 0x20>;
ranges;
ti,hwmods = "ocp2scp1";
usb2_phy: usb2phy@4a084000 {

27
arch/arm/boot/dts/prima2.dtsi
View file

@ -171,7 +171,8 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0xb0000000 0x180000>;
ranges = <0xb0000000 0xb0000000 0x180000>,
<0x56000000 0x56000000 0x1b00000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
@ -196,25 +197,32 @@
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
reg = <0xb0050000 0x1000>;
interrupts = <17>;
fifosize = <128>;
clocks = <&clks 13>;
sirf,uart-dma-rx-channel = <21>;
sirf,uart-dma-tx-channel = <2>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
reg = <0xb0060000 0x1000>;
interrupts = <18>;
fifosize = <32>;
clocks = <&clks 14>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
reg = <0xb0070000 0x1000>;
interrupts = <19>;
fifosize = <128>;
clocks = <&clks 15>;
sirf,uart-dma-rx-channel = <6>;
sirf,uart-dma-tx-channel = <7>;
};
usp0: usp@b0080000 {
@ -222,7 +230,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
fifosize = <128>;
clocks = <&clks 28>;
sirf,usp-dma-rx-channel = <17>;
sirf,usp-dma-tx-channel = <18>;
};
usp1: usp@b0090000 {
@ -230,7 +241,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
fifosize = <128>;
clocks = <&clks 29>;
sirf,usp-dma-rx-channel = <14>;
sirf,usp-dma-tx-channel = <15>;
};
usp2: usp@b00a0000 {
@ -238,7 +252,10 @@
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
fifosize = <128>;
clocks = <&clks 30>;
sirf,usp-dma-rx-channel = <10>;
sirf,usp-dma-tx-channel = <11>;
};
dmac0: dma-controller@b00b0000 {
@ -261,6 +278,8 @@
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
interrupts = <14>;
sirf,vip-dma-rx-channel = <16>;
};
spi0: spi@b00d0000 {

6
arch/arm/boot/dts/r8a73a4.dtsi
View file

@ -193,7 +193,7 @@
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a73a4-sdhi";
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
@ -202,7 +202,7 @@
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a73a4-sdhi";
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
@ -211,7 +211,7 @@
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a73a4-sdhi";
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;

1
arch/arm/boot/dts/r8a7778.dtsi
View file

@ -96,6 +96,5 @@
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7778";
reg = <0xfffc000 0x118>;
#gpio-range-cells = <3>;
};
};

1
arch/arm/boot/dts/r8a7779.dtsi
View file

@ -188,7 +188,6 @@
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7779";
reg = <0xfffc0000 0x23c>;
#gpio-range-cells = <3>;
};
thermal@ffc48000 {

9
arch/arm/boot/dts/r8a7790.dtsi
View file

@ -148,11 +148,10 @@
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7790";
reg = <0 0xe6060000 0 0x250>;
#gpio-range-cells = <3>;
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
@ -161,7 +160,7 @@
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
@ -170,7 +169,7 @@
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
@ -179,7 +178,7 @@
};
sdhi3: sdhi@ee160000 {
compatible = "renesas,r8a7790-sdhi";
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 168 4>;

6
arch/arm/boot/dts/sh73a0.dtsi
View file

@ -196,7 +196,7 @@
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7740-sdhi";
compatible = "renesas,sdhi-r8a7740";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 83 4
@ -208,7 +208,7 @@
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7740-sdhi";
compatible = "renesas,sdhi-r8a7740";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 88 4
@ -219,7 +219,7 @@
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7740-sdhi";
compatible = "renesas,sdhi-r8a7740";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 104 4

38
arch/arm/common/edma.c
View file

@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
.ccnt = 1,
};
static const struct of_device_id edma_of_ids[] = {
{ .compatible = "ti,edma3", },
{}
};
/*****************************************************************************/
static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
static int prepare_unused_channel_list(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
int i, ctlr;
int i, count, ctlr;
struct of_phandle_args dma_spec;
if (dev->of_node) {
count = of_property_count_strings(dev->of_node, "dma-names");
if (count < 0)
return 0;
for (i = 0; i < count; i++) {
if (of_parse_phandle_with_args(dev->of_node, "dmas",
"#dma-cells", i,
&dma_spec))
continue;
if (!of_match_node(edma_of_ids, dma_spec.np)) {
of_node_put(dma_spec.np);
continue;
}
clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
edma_cc[0]->edma_unused);
of_node_put(dma_spec.np);
}
return 0;
}
/* For non-OF case */
for (i = 0; i < pdev->num_resources; i++) {
if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
(int)pdev->resource[i].start >= 0) {
ctlr = EDMA_CTLR(pdev->resource[i].start);
clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
edma_cc[ctlr]->edma_unused);
edma_cc[ctlr]->edma_unused);
}
}
@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
return 0;
}
static const struct of_device_id edma_of_ids[] = {
{ .compatible = "ti,edma3", },
{}
};
static struct platform_driver edma_driver = {
.driver = {
.name = "edma",

3
arch/arm/configs/multi_v7_defconfig
View file

@ -36,6 +36,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_TEGRA_PCI=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_UX500_DT=y
CONFIG_ARCH_VEXPRESS=y
@ -46,6 +47,7 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_SMP=y
CONFIG_HIGHPTE=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
@ -133,6 +135,7 @@ CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_OMAP=y

6
arch/arm/crypto/aes-armv4.S
View file

@ -148,7 +148,7 @@ AES_Te:
@ const AES_KEY *key) {
.align 5
ENTRY(AES_encrypt)
sub r3,pc,#8 @ AES_encrypt
adr r3,AES_encrypt
stmdb sp!,{r1,r4-r12,lr}
mov r12,r0 @ inp
mov r11,r2
@ -381,7 +381,7 @@ _armv4_AES_encrypt:
.align 5
ENTRY(private_AES_set_encrypt_key)
_armv4_AES_set_encrypt_key:
sub r3,pc,#8 @ AES_set_encrypt_key
adr r3,_armv4_AES_set_encrypt_key
teq r0,#0
moveq r0,#-1
beq .Labrt
@ -843,7 +843,7 @@ AES_Td:
@ const AES_KEY *key) {
.align 5
ENTRY(AES_decrypt)
sub r3,pc,#8 @ AES_decrypt
adr r3,AES_decrypt
stmdb sp!,{r1,r4-r12,lr}
mov r12,r0 @ inp
mov r11,r2

7
arch/arm/include/asm/uaccess.h
View file

@ -19,6 +19,13 @@
#include <asm/unified.h>
#include <asm/compiler.h>
#if __LINUX_ARM_ARCH__ < 6
#include <asm-generic/uaccess-unaligned.h>
#else
#define __get_user_unaligned __get_user
#define __put_user_unaligned __put_user
#endif
#define VERIFY_READ 0
#define VERIFY_WRITE 1

4
arch/arm/kernel/entry-common.S
View file

@ -442,10 +442,10 @@ local_restart:
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
2: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
2: mov why, #0 @ no longer a real syscall
mov why, #0 @ no longer a real syscall
b sys_ni_syscall @ not private func
#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)

8
arch/arm/kernel/entry-header.S
View file

@ -329,10 +329,10 @@
#ifdef CONFIG_CONTEXT_TRACKING
.if \save
stmdb sp!, {r0-r3, ip, lr}
bl user_exit
bl context_tracking_user_exit
ldmia sp!, {r0-r3, ip, lr}
.else
bl user_exit
bl context_tracking_user_exit
.endif
#endif
.endm
@ -341,10 +341,10 @@
#ifdef CONFIG_CONTEXT_TRACKING
.if \save
stmdb sp!, {r0-r3, ip, lr}
bl user_enter
bl context_tracking_user_enter
ldmia sp!, {r0-r3, ip, lr}
.else
bl user_enter
bl context_tracking_user_enter
.endif
#endif
.endm

6
arch/arm/kvm/reset.c
View file

@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = {
*/
int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
{
struct kvm_regs *cpu_reset;
struct kvm_regs *reset_regs;
const struct kvm_irq_level *cpu_vtimer_irq;
switch (vcpu->arch.target) {
case KVM_ARM_TARGET_CORTEX_A15:
if (vcpu->vcpu_id > a15_max_cpu_idx)
return -EINVAL;
cpu_reset = &a15_regs_reset;
reset_regs = &a15_regs_reset;
vcpu->arch.midr = read_cpuid_id();
cpu_vtimer_irq = &a15_vtimer_irq;
break;
@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
}
/* Reset core registers */
memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
/* Reset CP15 registers */
kvm_reset_coprocs(vcpu);

2
arch/arm/mach-at91/at91rm9200_time.c
View file

@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91rm9200_timer_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};

2
arch/arm/mach-at91/at91sam926x_time.c
View file

@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
static struct irqaction at91sam926x_pit_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = at91sam926x_pit_interrupt,
.irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};

8
arch/arm/mach-at91/at91sam9g45_reset.S
View file

@ -16,11 +16,17 @@
#include "at91_rstc.h"
.arm
/*
* at91_ramc_base is an array void*
* init at NULL if only one DDR controler is present in or DT
*/
.globl at91sam9g45_restart
at91sam9g45_restart:
ldr r5, =at91_ramc_base @ preload constants
ldr r0, [r5]
ldr r5, [r5, #4] @ ddr1
cmp r5, #0
ldr r4, =at91_rstc_base
ldr r1, [r4]
@ -30,6 +36,8 @@ at91sam9g45_restart:
.balign 32 @ align to cache line
strne r2, [r5, #AT91_DDRSDRC_RTR] @ disable DDR1 access
strne r3, [r5, #AT91_DDRSDRC_LPR] @ power down DDR1
str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access
str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0
str r4, [r1, #AT91_RSTC_CR] @ reset processor

2
arch/arm/mach-at91/at91x40_time.c
View file

@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
static struct irqaction at91x40_timer_irq = {
.name = "at91_tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.flags = IRQF_TIMER,
.handler = at91x40_timer_interrupt
};

2
arch/arm/mach-davinci/board-dm365-evm.c
View file

@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
.context = (void *)0x7f00,
};
static struct snd_platform_data dm365_evm_snd_data = {
static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
.asp_chan_q = EVENTQ_3,
};

4
arch/arm/mach-davinci/include/mach/serial.h
View file

@ -15,8 +15,6 @@
#include <mach/hardware.h>
#include <linux/platform_device.h>
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
@ -39,6 +37,8 @@
#define UART_DM646X_SCR_TX_WATERMARK 0x08
#ifndef __ASSEMBLY__
#include <linux/platform_device.h>
extern int davinci_serial_init(struct platform_device *);
#endif

1
arch/arm/mach-imx/clk-fixup-mux.c
View file

@ -90,6 +90,7 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
init.ops = &clk_fixup_mux_ops;
init.parent_names = parents;
init.num_parents = num_parents;
init.flags = 0;
fixup_mux->mux.reg = reg;
fixup_mux->mux.shift = shift;

2
arch/arm/mach-imx/clk-imx27.c
View file

@ -285,7 +285,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0");
clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);

4
arch/arm/mach-imx/clk-imx51-imx53.c
View file

@ -328,7 +328,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
clk_register_clkdev(clk[cpu_podf], NULL, "cpu0");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
@ -397,7 +397,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
spdif_sel, ARRAY_SIZE(spdif_sel));
clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));

9
arch/arm/mach-imx/mach-imx6q.c
View file

@ -233,10 +233,15 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
of_node_put(np);
}
static void __init imx6q_opp_init(struct device *cpu_dev)
static void __init imx6q_opp_init(void)
{
struct device_node *np;
struct device *cpu_dev = get_cpu_device(0);
if (!cpu_dev) {
pr_warn("failed to get cpu0 device\n");
return;
}
np = of_node_get(cpu_dev->of_node);
if (!np) {
pr_warn("failed to find cpu0 node\n");
@ -268,7 +273,7 @@ static void __init imx6q_init_late(void)
imx6q_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
imx6q_opp_init();
platform_device_register(&imx6q_cpufreq_pdev);
}
}

11
arch/arm/mach-imx/system.c
View file

@ -117,6 +117,17 @@ void __init imx_init_l2cache(void)
/* Configure the L2 PREFETCH and POWER registers */
val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
val |= 0x70800000;
/*
* The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
* The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
* But according to ARM PL310 errata: 752271
* ID: 752271: Double linefill feature can cause data corruption
* Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
* Workaround: The only workaround to this erratum is to disable the
* double linefill feature. This is the default behavior.
*/
if (cpu_is_imx6q())
val &= ~(1 << 30 | 1 << 23);
writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);

7
arch/arm/mach-integrator/pci_v3.h
View file

@ -1,2 +1,9 @@
/* Simple oneliner include to the PCIv3 early init */
#ifdef CONFIG_PCI
extern int pci_v3_early_init(void);
#else
static inline int pci_v3_early_init(void)
{
return 0;
}
#endif

8
arch/arm/mach-mvebu/coherency.c
View file

@ -140,6 +140,7 @@ int __init coherency_init(void)
coherency_base = of_iomap(np, 0);
coherency_cpu_base = of_iomap(np, 1);
set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
of_node_put(np);
}
return 0;
@ -147,9 +148,14 @@ int __init coherency_init(void)
static int __init coherency_late_init(void)
{
if (of_find_matching_node(NULL, of_coherency_table))
struct device_node *np;
np = of_find_matching_node(NULL, of_coherency_table);
if (np) {
bus_register_notifier(&platform_bus_type,
&mvebu_hwcc_platform_nb);
of_node_put(np);
}
return 0;
}

1
arch/arm/mach-mvebu/pmsu.c
View file

@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
pr_info("Initializing Power Management Service Unit\n");
pmsu_mp_base = of_iomap(np, 0);
pmsu_reset_base = of_iomap(np, 1);
of_node_put(np);
}
return 0;

1
arch/arm/mach-mvebu/system-controller.c
View file

@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
BUG_ON(!match);
system_controller_base = of_iomap(np, 0);
mvebu_sc = (struct mvebu_system_controller *)match->data;
of_node_put(np);
}
return 0;

2
arch/arm/mach-omap2/cclock44xx_data.c
View file

@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck),
CLK(NULL, "auxclk5_ck", &auxclk5_ck),
CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck),
CLK("omap-gpmc", "fck", &dummy_ck),
CLK("50000000.gpmc", "fck", &dummy_ck),
CLK("omap_i2c.1", "ick", &dummy_ck),
CLK("omap_i2c.2", "ick", &dummy_ck),
CLK("omap_i2c.3", "ick", &dummy_ck),

2
arch/arm/mach-omap2/cpuidle44xx.c
View file

@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
* Call idle CPU cluster PM exit notifier chain
* to restore GIC and wakeupgen context.
*/
if ((cx->mpu_state == PWRDM_POWER_RET) &&
if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF))
cpu_cluster_pm_exit();

4
arch/arm/mach-omap2/gpmc.c
View file

@ -1491,8 +1491,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
*/
ret = gpmc_cs_remap(cs, res.start);
if (ret < 0) {
dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
cs, res.start);
dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
cs, &res.start);
goto err;
}

2
arch/arm/mach-omap2/mux34xx.c
View file

@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
"uart1_rts", "ssi1_flag_tx", NULL, NULL,
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RX, 151,
"uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
"gpio_151", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
"uart1_tx", "ssi1_dat_tx", NULL, NULL,

2
arch/arm/mach-omap2/omap-smp.c
View file

@ -1,5 +1,5 @@
/*
* OMAP4 SMP source file. It contains platform specific fucntions
* OMAP4 SMP source file. It contains platform specific functions
* needed for the linux smp kernel.
*
* Copyright (C) 2009 Texas Instruments, Inc.

2
arch/arm/mach-omap2/omap_device.c
View file

@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
}
od = omap_device_alloc(pdev, hwmods, oh_cnt);
if (!od) {
if (IS_ERR(od)) {
dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
oh_name);
ret = PTR_ERR(od);

2
arch/arm/mach-sa1100/collie.c
View file

@ -289,7 +289,7 @@ static void collie_flash_exit(void)
}
static struct flash_platform_data collie_flash_data = {
.map_name = "cfi_probe",
.map_name = "jedec_probe",
.init = collie_flash_init,
.set_vpp = collie_set_vpp,
.exit = collie_flash_exit,

4
arch/arm/mach-shmobile/board-armadillo800eva.c
View file

@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
"fsib_mclk_in", "fsib"),
/* GETHER */
PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
"gether_mii", "gether"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
"gether_int", "gether"),
/* HDMI */
PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",

27
arch/arm/mach-shmobile/board-lager.c
View file

@ -29,6 +29,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void)
&ether_pdata, sizeof(ether_pdata));
}
/*
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int lager_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init lager_init(void)
{
lager_add_standard_devices();
phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
}
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
NULL,
@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
DT_MACHINE_START(LAGER_DT, "lager")
.init_early = r8a7790_init_delay,
.init_time = r8a7790_timer_init,
.init_machine = lager_add_standard_devices,
.init_machine = lager_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END

2
arch/arm/mach-shmobile/clock-r8a73a4.c
View file

@ -555,7 +555,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("pll2h", &pll2h_clk),
/* CPU clock */
CLKDEV_DEV_ID("cpufreq-cpu0", &z_clk),
CLKDEV_DEV_ID("cpu0", &z_clk),
/* DIV6 */
CLKDEV_CON_ID("zb", &div6_clks[DIV6_ZB]),

2
arch/arm/mach-shmobile/clock-sh73a0.c
View file

@ -616,7 +616,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
/* DIV4 clocks */
CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]),
CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
/* DIV6 clocks */
CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),

10
arch/arm/mach-u300/Kconfig
View file

@ -1,7 +1,3 @@
menu "ST-Ericsson AB U300/U335 Platform"
comment "ST-Ericsson Mobile Platform Products"
config ARCH_U300
bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
depends on MMU
@ -25,7 +21,9 @@ config ARCH_U300
help
Support for ST-Ericsson U300 series mobile platforms.
comment "ST-Ericsson U300/U335 Feature Selections"
if ARCH_U300
menu "ST-Ericsson AB U300/U335 Platform"
config MACH_U300
depends on ARCH_U300
@ -53,3 +51,5 @@ config MACH_U300_SPIDUMMY
SPI framework and ARM PL022 support.
endmenu
endif

1
arch/arm/mach-ux500/cache-l2x0.c
View file

@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void)
* some SMI service available.
*/
outer_cache.disable = NULL;
outer_cache.set_debug = NULL;
return 0;
}

11
arch/arm/mach-vexpress/tc2_pm.c
View file

@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency)
} else
BUG();
/*
* If the CPU is committed to power down, make sure
* the power controller will be in charge of waking it
* up upon IRQ, ie IRQ lines are cut from GIC CPU IF
* to the CPU by disabling the GIC CPU IF to prevent wfi
* from completing execution behind power controller back
*/
if (!skip_wfi)
gic_cpu_if_down();
if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
arch_spin_unlock(&tc2_pm_lock);
@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency)
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
gic_cpu_if_down();
tc2_pm_down(residency);
}

7
arch/arm64/Kconfig.debug
View file

@ -6,13 +6,6 @@ config FRAME_POINTER
bool
default y
config DEBUG_STACK_USAGE
bool "Enable stack utilization instrumentation"
depends on DEBUG_KERNEL
help
Enables the display of the minimum amount of free stack which each
task has ever had available in the sysrq-T output.
config EARLY_PRINTK
bool "Early printk support"
default y

5
arch/arm64/configs/defconfig
View file

@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_BLK_DEV is not set
CONFIG_BLK_DEV=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
@ -72,6 +72,7 @@ CONFIG_LOGO=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_FUSE_FS=y
@ -90,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_BLK=y

2
arch/arm64/include/asm/hwcap.h
View file

@ -43,6 +43,6 @@
COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
extern unsigned int elf_hwcap;
extern unsigned long elf_hwcap;
#endif
#endif

10
arch/arm64/include/asm/uaccess.h
View file

@ -166,9 +166,10 @@ do { \
#define get_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ? \
__get_user((x), (ptr)) : \
access_ok(VERIFY_READ, __p, sizeof(*__p)) ? \
__get_user((x), __p) : \
((x) = 0, -EFAULT); \
})
@ -227,9 +228,10 @@ do { \
#define put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ? \
__put_user((x), (ptr)) : \
access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ? \
__put_user((x), __p) : \
-EFAULT; \
})

2
arch/arm64/kernel/fpsimd.c
View file

@ -80,8 +80,10 @@ void fpsimd_thread_switch(struct task_struct *next)
void fpsimd_flush_thread(void)
{
preempt_disable();
memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
fpsimd_load_state(&current->thread.fpsimd_state);
preempt_enable();
}
#ifdef CONFIG_KERNEL_MODE_NEON

21
arch/arm64/kernel/process.c
View file

@ -143,15 +143,26 @@ void machine_restart(char *cmd)
void __show_regs(struct pt_regs *regs)
{
int i;
int i, top_reg;
u64 lr, sp;
if (compat_user_mode(regs)) {
lr = regs->compat_lr;
sp = regs->compat_sp;
top_reg = 12;
} else {
lr = regs->regs[30];
sp = regs->sp;
top_reg = 29;
}
show_regs_print_info(KERN_DEFAULT);
print_symbol("PC is at %s\n", instruction_pointer(regs));
print_symbol("LR is at %s\n", regs->regs[30]);
print_symbol("LR is at %s\n", lr);
printk("pc : [<%016llx>] lr : [<%016llx>] pstate: %08llx\n",
regs->pc, regs->regs[30], regs->pstate);
printk("sp : %016llx\n", regs->sp);
for (i = 29; i >= 0; i--) {
regs->pc, lr, regs->pstate);
printk("sp : %016llx\n", sp);
for (i = top_reg; i >= 0; i--) {
printk("x%-2d: %016llx ", i, regs->regs[i]);
if (i % 2 == 0)
printk("\n");

2
arch/arm64/kernel/setup.c
View file

@ -57,7 +57,7 @@
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
unsigned int elf_hwcap __read_mostly;
unsigned long elf_hwcap __read_mostly;
EXPORT_SYMBOL_GPL(elf_hwcap);
static const char *cpu_name;

2
arch/arm64/mm/fault.c
View file

@ -130,7 +130,7 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
force_sig_info(sig, &si, tsk);
}
void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->active_mm;

2
arch/arm64/mm/tlb.S
View file

@ -35,7 +35,7 @@
*/
ENTRY(__cpu_flush_user_tlb_range)
vma_vm_mm x3, x2 // get vma->vm_mm
mmid x3, x3 // get vm_mm->context.id
mmid w3, x3 // get vm_mm->context.id
dsb sy
lsr x0, x0, #12 // align address
lsr x1, x1, #12

16
arch/avr32/include/asm/Kbuild
View file

@ -1,5 +1,19 @@
generic-y += clkdev.h
generic-y += cputime.h
generic-y += delay.h
generic-y += device.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += exec.h
generic-y += trace_clock.h
generic-y += futex.h
generic-y += irq_regs.h
generic-y += param.h
generic-y += local.h
generic-y += local64.h
generic-y += percpu.h
generic-y += scatterlist.h
generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += xor.h

6
arch/avr32/include/asm/cputime.h
View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_CPUTIME_H
#define __ASM_AVR32_CPUTIME_H
#include <asm-generic/cputime.h>
#endif /* __ASM_AVR32_CPUTIME_H */

1
arch/avr32/include/asm/delay.h
View file

@ -1 +0,0 @@
#include <asm-generic/delay.h>

7
arch/avr32/include/asm/device.h
View file

@ -1,7 +0,0 @@
/*
* Arch specific extensions to struct device
*
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>

6
arch/avr32/include/asm/div64.h
View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_DIV64_H
#define __ASM_AVR32_DIV64_H
#include <asm-generic/div64.h>
#endif /* __ASM_AVR32_DIV64_H */

6
arch/avr32/include/asm/emergency-restart.h
View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
#define __ASM_AVR32_EMERGENCY_RESTART_H
#include <asm-generic/emergency-restart.h>
#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */

6
arch/avr32/include/asm/futex.h
View file

@ -1,6 +0,0 @@
#ifndef __ASM_AVR32_FUTEX_H
#define __ASM_AVR32_FUTEX_H
#include <asm-generic/futex.h>
#endif /* __ASM_AVR32_FUTEX_H */

Some files were not shown because too many files have changed in this diff Show more