Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Fixes for omaps for v4.3-rc cycle:

Browse source 
- Two more patches to fix most of the MMC regressions with the
   PBIAS regulator changes. At least two MMC driver related issues
   still seems to remain for omap3 legacy booting and omap4 duovero.
   Note that the dts changes depend on a recent regulator fix, and
   are based on the regulator commit now in mainline kernel
 
 - Enable autoidle for am43xx clocks to prevent clocks from staying
   always on
 
 - Fix i2c5 pinctrl offsets for omap5-uevm
 
 - Enable PCA953X as that's needed for HDMI to work on omap5
 
 - Update phy supplies for beagle x15 beta board
 
 - Use palmas-usb for on beagle x15 to start using the related
   driver that recently got merged
 -
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWBKnGAAoJEBvUPslcq6Vzps4QAIJGO+P3Fivcaso+1Spw41ib
 tTQUgF5dGX1It7HageKyd8mk9d5ywlZ3iFCJKuxdJAZfzSzdW6QdF/XKvH5K26nO
 +imDQV/WdGYcgKGQWvkMGbaWIcqxkSU1Wk/VWIlibXd875vVE5Koit5yvtQZTt19
 Xxk7Sj3ADCQ+WTgh+k/hFlvypjbKnWfV2HvCZ+tPPDHQA0IVejAfWn4u3jmcx6S9
 VY1CnU5NzQNNLmXaYwuUSKYFnipfrljsNvZfwLvVFYOfApWOAKpWzs2GdX161TJx
 oZdMhSVwJ9gBGRGhv33GXNouVmq4aEesXwg8M0fd8WpWWXVDI8SkEgALU9eghgGx
 Z41OuJIXS9udgqQdfwK2EUrynKKhQ/R1ywAM4SHyGCbs+FO3yAE8Gxgot/cnaGGx
 xJkog31VkHfG2ucGjBMaMJQ9oJfCtyT9tTdpHOnaKVrnn/7ZQwDbRR/npsTaA1Vg
 6EZvcYJpkmQ8Z/wYdMVvHrbzZ5GY/FRsRo8MwADmarLGRJ8aN+T3ZXik/cFmEqu+
 UN2OkOWn0i/OTdw8ED7pzvTMFr/mOZW1G51cj9W/uuVrA5nEmIWxrlVYm90aiE65
 Qz+f+qcTiVFFatpEq9CUhxsvOiDZ9gbBW130f/hmrkKm3PziAla3V1n+nOcO6/IF
 UBINOYy30yfDDccmbpnS
 =UnKL
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.3-rc cycle:

- Two more patches to fix most of the MMC regressions with the
  PBIAS regulator changes. At least two MMC driver related issues
  still seems to remain for omap3 legacy booting and omap4 duovero.
  Note that the dts changes depend on a recent regulator fix, and
  are based on the regulator commit now in mainline kernel

- Enable autoidle for am43xx clocks to prevent clocks from staying
  always on

- Fix i2c5 pinctrl offsets for omap5-uevm

- Enable PCA953X as that's needed for HDMI to work on omap5

- Update phy supplies for beagle x15 beta board

- Use palmas-usb for on beagle x15 to start using the related
  driver that recently got merged

* tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: fix omap2+ address translation for pbias
  ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
  ARM: omap2plus_defconfig: enable GPIO_PCA953X
  ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
  ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
  ARM: dts: am57xx-beagle-x15: Update Phy supplies
  regulator: pbias: program pbias register offset in pbias driver
  ARM: omap2plus_defconfig: Enable MUSB DMA support
  ARM: DRA752: Add ID detect for ES2.0
  ARM: OMAP3: vc: fix 'or' always true warning
  ARM: OMAP2+: Fix booting if no timer parent clock is available
  ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2015-09-26 22:22:31 -07:00
commit b8ba826f8d
16 changed files with 119 additions and 46 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
Documentation/devicetree/bindings/regulator/pbias-regulator.txt
View file

@ -2,7 +2,12 @@ PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
Required properties:
- compatible:
- "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
- should be "ti,pbias-dra7" for DRA7
- should be "ti,pbias-omap2" for OMAP2
- should be "ti,pbias-omap3" for OMAP3
- should be "ti,pbias-omap4" for OMAP4
- should be "ti,pbias-omap5" for OMAP5
- "ti,pbias-omap" is deprecated
- reg: pbias register offset from syscon base and size of pbias register.
- syscon : phandle of the system control module
- regulator-name : should be

42
arch/arm/boot/dts/am57xx-beagle-x15.dts
View file

@ -98,13 +98,6 @@
pinctrl-0 = <&extcon_usb1_pins>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb2_pins>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@ -326,12 +319,6 @@
>;
};
extcon_usb2_pins: extcon_usb2_pins {
pinctrl-single,pins = <
0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
@ -432,7 +419,7 @@
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHY */
/* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -440,6 +427,15 @@
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_1V8_PHYB */
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
@ -495,6 +491,14 @@
gpio-controller;
#gpio-cells = <2>;
};
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
ti,enable-id-detection;
id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
};
};
tmp102: tmp102@48 {
@ -623,6 +627,14 @@
};
&usb2 {
/*
* Stand alone usage is peripheral only.
* However, with some resistor modifications
* this port can be used via expansion connectors
* as "host" or "dual-role". If so, provide
* the necessary dr_mode override in the expansion
* board's DT.
*/
dr_mode = "peripheral";
};
@ -681,7 +693,7 @@
&hdmi {
status = "ok";
vdda-supply = <&ldo3_reg>;
vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;

1
arch/arm/boot/dts/dra7.dtsi
View file

@ -120,6 +120,7 @@
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-dra7", "ti,pbias-omap";

1
arch/arm/boot/dts/omap2430.dtsi
View file

@ -56,6 +56,7 @@
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x270 0x240>;
scm_clocks: clocks {
#address-cells = <1>;

25
arch/arm/boot/dts/omap3.dtsi
View file

@ -113,10 +113,22 @@
};
scm_conf: scm_conf@270 {
compatible = "syscon";
compatible = "syscon", "simple-bus";
reg = <0x270 0x330>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x270 0x330>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap3", "ti,pbias-omap";
reg = <0x2b0 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
scm_clocks: clocks {
#address-cells = <1>;
@ -202,17 +214,6 @@
dma-requests = <96>;
};
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap3", "ti,pbias-omap";
reg = <0x2b0 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;

1
arch/arm/boot/dts/omap4.dtsi
View file

@ -196,6 +196,7 @@
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5a0 0x170>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap4", "ti,pbias-omap";

4
arch/arm/boot/dts/omap5-uevm.dts
View file

@ -174,8 +174,8 @@
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};

1
arch/arm/boot/dts/omap5.dtsi
View file

@ -185,6 +185,7 @@
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5a0 0xec>;
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap5", "ti,pbias-omap";

3
arch/arm/configs/omap2plus_defconfig
View file

@ -240,6 +240,7 @@ CONFIG_SSI_PROTOCOL=m
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
@ -350,6 +351,8 @@ CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_DWC3=m
CONFIG_USB_TEST=m
CONFIG_AM335X_PHY_USB=y

8
arch/arm/mach-omap2/id.c
View file

@ -653,8 +653,12 @@ void __init dra7xxx_check_revision(void)
omap_revision = DRA752_REV_ES1_0;
break;
case 1:
default:
omap_revision = DRA752_REV_ES1_1;
break;
case 2:
default:
omap_revision = DRA752_REV_ES2_0;
break;
}
break;
@ -674,7 +678,7 @@ void __init dra7xxx_check_revision(void)
/* Unknown default to latest silicon rev as default*/
pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
__func__, idcode, hawkeye, rev);
omap_revision = DRA752_REV_ES1_1;
omap_revision = DRA752_REV_ES2_0;
}
sprintf(soc_name, "DRA%03x", omap_rev() >> 16);

1
arch/arm/mach-omap2/io.c
View file

@ -676,6 +676,7 @@ void __init am43xx_init_early(void)
void __init am43xx_init_late(void)
{
omap_common_late_init();
omap2_clk_enable_autoidle_all();
}
#endif

3
arch/arm/mach-omap2/omap_device.c
View file

@ -901,7 +901,8 @@ static int __init omap_device_late_idle(struct device *dev, void *data)
if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
return 0;
if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER &&
od->_driver_status != BUS_NOTIFY_BIND_DRIVER) {
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
dev_warn(dev, "%s: enabled but no driver. Idling\n",
__func__);

2
arch/arm/mach-omap2/soc.h
View file

@ -469,6 +469,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define DRA7XX_CLASS 0x07000000
#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
void omap2xxx_check_revision(void);

8
arch/arm/mach-omap2/timer.c
View file

@ -297,12 +297,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
if (IS_ERR(src))
return PTR_ERR(src);
r = clk_set_parent(timer->fclk, src);
if (r < 0) {
pr_warn("%s: %s cannot set source\n", __func__, oh->name);
clk_put(src);
return r;
}
WARN(clk_set_parent(timer->fclk, src) < 0,
"Cannot set timer parent clock, no PLL clock driver?");
clk_put(src);

2
arch/arm/mach-omap2/vc.c
View file

@ -300,7 +300,7 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
(val & OMAP3430_PRM_POLCTRL_OFFMODE_POL)) {
val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",

56
drivers/regulator/pbias-regulator.c
View file

@ -45,6 +45,10 @@ struct pbias_regulator_data {
int voltage;
};
struct pbias_of_data {
unsigned int offset;
};
static const unsigned int pbias_volt_table[] = {
1800000,
3000000
@ -102,8 +106,35 @@ static struct of_regulator_match pbias_matches[] = {
};
#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches)
/* Offset from SCM general area (and syscon) base */
static const struct pbias_of_data pbias_of_data_omap2 = {
.offset = 0x230,
};
static const struct pbias_of_data pbias_of_data_omap3 = {
.offset = 0x2b0,
};
static const struct pbias_of_data pbias_of_data_omap4 = {
.offset = 0x60,
};
static const struct pbias_of_data pbias_of_data_omap5 = {
.offset = 0x60,
};
static const struct pbias_of_data pbias_of_data_dra7 = {
.offset = 0xe00,
};
static const struct of_device_id pbias_of_match[] = {
{ .compatible = "ti,pbias-omap", },
{ .compatible = "ti,pbias-omap2", .data = &pbias_of_data_omap2, },
{ .compatible = "ti,pbias-omap3", .data = &pbias_of_data_omap3, },
{ .compatible = "ti,pbias-omap4", .data = &pbias_of_data_omap4, },
{ .compatible = "ti,pbias-omap5", .data = &pbias_of_data_omap5, },
{ .compatible = "ti,pbias-dra7", .data = &pbias_of_data_dra7, },
{},
};
MODULE_DEVICE_TABLE(of, pbias_of_match);
@ -118,6 +149,9 @@ static int pbias_regulator_probe(struct platform_device *pdev)
const struct pbias_reg_info *info;
int ret = 0;
int count, idx, data_idx = 0;
const struct of_device_id *match;
const struct pbias_of_data *data;
unsigned int offset;
count = of_regulator_match(&pdev->dev, np, pbias_matches,
PBIAS_NUM_REGS);
@ -133,6 +167,20 @@ static int pbias_regulator_probe(struct platform_device *pdev)
if (IS_ERR(syscon))
return PTR_ERR(syscon);
match = of_match_device(of_match_ptr(pbias_of_match), &pdev->dev);
if (match && match->data) {
data = match->data;
offset = data->offset;
} else {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
offset = res->start;
dev_WARN(&pdev->dev,
"using legacy dt data for pbias offset\n");
}
cfg.regmap = syscon;
cfg.dev = &pdev->dev;
@ -145,10 +193,6 @@ static int pbias_regulator_probe(struct platform_device *pdev)
if (!info)
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
drvdata[data_idx].syscon = syscon;
drvdata[data_idx].info = info;
drvdata[data_idx].desc.name = info->name;
@ -158,9 +202,9 @@ static int pbias_regulator_probe(struct platform_device *pdev)
drvdata[data_idx].desc.volt_table = pbias_volt_table;
drvdata[data_idx].desc.n_voltages = 2;
drvdata[data_idx].desc.enable_time = info->enable_time;
drvdata[data_idx].desc.vsel_reg = res->start;
drvdata[data_idx].desc.vsel_reg = offset;
drvdata[data_idx].desc.vsel_mask = info->vmode;
drvdata[data_idx].desc.enable_reg = res->start;
drvdata[data_idx].desc.enable_reg = offset;
drvdata[data_idx].desc.enable_mask = info->enable_mask;
drvdata[data_idx].desc.enable_val = info->enable;
drvdata[data_idx].desc.disable_val = info->disable_val;