video: exynos_dp: Check DPCD return codes
Add return code checks to the DPCD transactions in the SW link training Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
This commit is contained in:
parent
825e90d0a1
commit
ace2d7f2b5
1 changed files with 56 additions and 30 deletions
|
@ -262,11 +262,10 @@ static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device *dp,
|
|||
}
|
||||
}
|
||||
|
||||
static void exynos_dp_link_start(struct exynos_dp_device *dp)
|
||||
static int exynos_dp_link_start(struct exynos_dp_device *dp)
|
||||
{
|
||||
u8 buf[4];
|
||||
int lane;
|
||||
int lane_count;
|
||||
int lane, lane_count, retval;
|
||||
|
||||
lane_count = dp->link_train.lane_count;
|
||||
|
||||
|
@ -277,8 +276,10 @@ static void exynos_dp_link_start(struct exynos_dp_device *dp)
|
|||
dp->link_train.cr_loop[lane] = 0;
|
||||
|
||||
/* Set sink to D0 (Sink Not Ready) mode. */
|
||||
exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE,
|
||||
retval = exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE,
|
||||
DPCD_SET_POWER_STATE_D0);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
/* Set link rate and count as you want to establish*/
|
||||
exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
|
||||
|
@ -287,8 +288,10 @@ static void exynos_dp_link_start(struct exynos_dp_device *dp)
|
|||
/* Setup RX configuration */
|
||||
buf[0] = dp->link_train.link_rate;
|
||||
buf[1] = dp->link_train.lane_count;
|
||||
exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_LINK_BW_SET,
|
||||
retval = exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_LINK_BW_SET,
|
||||
2, buf);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
/* Set TX pre-emphasis to minimum */
|
||||
for (lane = 0; lane < lane_count; lane++)
|
||||
|
@ -307,9 +310,11 @@ static void exynos_dp_link_start(struct exynos_dp_device *dp)
|
|||
for (lane = 0; lane < lane_count; lane++)
|
||||
buf[lane] = DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 |
|
||||
DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0;
|
||||
exynos_dp_write_bytes_to_dpcd(dp,
|
||||
retval = exynos_dp_write_bytes_to_dpcd(dp,
|
||||
DPCD_ADDR_TRAINING_LANE0_SET,
|
||||
lane_count, buf);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int lane)
|
||||
|
@ -431,8 +436,7 @@ static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
|
|||
static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
|
||||
{
|
||||
u8 link_status[2];
|
||||
int lane;
|
||||
int lane_count;
|
||||
int lane, lane_count, retval;
|
||||
|
||||
u8 adjust_request[2];
|
||||
u8 voltage_swing;
|
||||
|
@ -443,17 +447,22 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
|
|||
|
||||
lane_count = dp->link_train.lane_count;
|
||||
|
||||
exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
|
||||
retval = exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
|
||||
2, link_status);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
|
||||
/* set training pattern 2 for EQ */
|
||||
exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
|
||||
|
||||
for (lane = 0; lane < lane_count; lane++) {
|
||||
exynos_dp_read_bytes_from_dpcd(dp,
|
||||
retval = exynos_dp_read_bytes_from_dpcd(dp,
|
||||
DPCD_ADDR_ADJUST_REQUEST_LANE0_1,
|
||||
2, adjust_request);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
voltage_swing = exynos_dp_get_adjust_request_voltage(
|
||||
adjust_request, lane);
|
||||
pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
|
||||
|
@ -473,15 +482,19 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
|
|||
lane);
|
||||
}
|
||||
|
||||
exynos_dp_write_byte_to_dpcd(dp,
|
||||
retval = exynos_dp_write_byte_to_dpcd(dp,
|
||||
DPCD_ADDR_TRAINING_PATTERN_SET,
|
||||
DPCD_SCRAMBLING_DISABLED |
|
||||
DPCD_TRAINING_PATTERN_2);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
exynos_dp_write_bytes_to_dpcd(dp,
|
||||
retval = exynos_dp_write_bytes_to_dpcd(dp,
|
||||
DPCD_ADDR_TRAINING_LANE0_SET,
|
||||
lane_count,
|
||||
dp->link_train.training_lane);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
dev_info(dp->dev, "Link Training Clock Recovery success\n");
|
||||
dp->link_train.lt_state = EQUALIZER_TRAINING;
|
||||
|
@ -489,9 +502,12 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
|
|||
for (lane = 0; lane < lane_count; lane++) {
|
||||
training_lane = exynos_dp_get_lane_link_training(
|
||||
dp, lane);
|
||||
exynos_dp_read_bytes_from_dpcd(dp,
|
||||
retval = exynos_dp_read_bytes_from_dpcd(dp,
|
||||
DPCD_ADDR_ADJUST_REQUEST_LANE0_1,
|
||||
2, adjust_request);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
voltage_swing = exynos_dp_get_adjust_request_voltage(
|
||||
adjust_request, lane);
|
||||
pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
|
||||
|
@ -528,13 +544,14 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
|
|||
dp->link_train.training_lane[lane], lane);
|
||||
}
|
||||
|
||||
exynos_dp_write_bytes_to_dpcd(dp,
|
||||
DPCD_ADDR_TRAINING_LANE0_SET,
|
||||
lane_count,
|
||||
retval = exynos_dp_write_bytes_to_dpcd(dp,
|
||||
DPCD_ADDR_TRAINING_LANE0_SET, lane_count,
|
||||
dp->link_train.training_lane);
|
||||
if (retval)
|
||||
return retval;
|
||||
}
|
||||
|
||||
return 0;
|
||||
return retval;
|
||||
|
||||
reduce_link_rate:
|
||||
exynos_dp_reduce_link_rate(dp);
|
||||
|
@ -545,8 +562,7 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
|
|||
{
|
||||
u8 link_status[2];
|
||||
u8 link_align[3];
|
||||
int lane;
|
||||
int lane_count;
|
||||
int lane, lane_count, retval;
|
||||
u32 reg;
|
||||
|
||||
u8 adjust_request[2];
|
||||
|
@ -558,8 +574,10 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
|
|||
|
||||
lane_count = dp->link_train.lane_count;
|
||||
|
||||
exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
|
||||
retval = exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
|
||||
2, link_status);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
|
||||
link_align[0] = link_status[0];
|
||||
|
@ -570,9 +588,12 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
|
|||
&link_align[2]);
|
||||
|
||||
for (lane = 0; lane < lane_count; lane++) {
|
||||
exynos_dp_read_bytes_from_dpcd(dp,
|
||||
retval = exynos_dp_read_bytes_from_dpcd(dp,
|
||||
DPCD_ADDR_ADJUST_REQUEST_LANE0_1,
|
||||
2, adjust_request);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
voltage_swing = exynos_dp_get_adjust_request_voltage(
|
||||
adjust_request, lane);
|
||||
pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
|
||||
|
@ -621,10 +642,12 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
|
|||
dp->link_train.training_lane[lane],
|
||||
lane);
|
||||
|
||||
exynos_dp_write_bytes_to_dpcd(dp,
|
||||
retval = exynos_dp_write_bytes_to_dpcd(dp,
|
||||
DPCD_ADDR_TRAINING_LANE0_SET,
|
||||
lane_count,
|
||||
dp->link_train.training_lane);
|
||||
if (retval)
|
||||
return retval;
|
||||
}
|
||||
} else {
|
||||
goto reduce_link_rate;
|
||||
|
@ -702,16 +725,17 @@ static void exynos_dp_init_training(struct exynos_dp_device *dp,
|
|||
|
||||
static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
|
||||
{
|
||||
int retval = 0;
|
||||
int training_finished = 0;
|
||||
int retval = 0, training_finished = 0;
|
||||
|
||||
dp->link_train.lt_state = START;
|
||||
|
||||
/* Process here */
|
||||
while (!training_finished) {
|
||||
while (!retval && !training_finished) {
|
||||
switch (dp->link_train.lt_state) {
|
||||
case START:
|
||||
exynos_dp_link_start(dp);
|
||||
retval = exynos_dp_link_start(dp);
|
||||
if (retval)
|
||||
dev_err(dp->dev, "LT link start failed!\n");
|
||||
break;
|
||||
case CLOCK_RECOVERY:
|
||||
retval = exynos_dp_process_clock_recovery(dp);
|
||||
|
@ -730,6 +754,8 @@ static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
|
|||
return -EREMOTEIO;
|
||||
}
|
||||
}
|
||||
if (retval)
|
||||
dev_err(dp->dev, "eDP link training failed (%d)\n", retval);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
|
Loading…
Reference in a new issue