Merge branch 'next/boards' into HEAD
Conflicts: arch/arm/mach-shmobile/board-armadillo800eva.c
This commit is contained in:
Olof Johansson
commit
a8e1ceb728
26 changed files with 633 additions and 33 deletions
|
|
@ -224,6 +224,20 @@ choice
|
|||
Say Y here if you want kernel low-level debugging support
|
||||
on i.MX6Q UART4.
|
||||
|
||||
config DEBUG_MMP_UART2
|
||||
bool "Kernel low-level debugging message via MMP UART2"
|
||||
depends on ARCH_MMP
|
||||
help
|
||||
Say Y here if you want kernel low-level debugging support
|
||||
on MMP UART2.
|
||||
|
||||
config DEBUG_MMP_UART3
|
||||
bool "Kernel low-level debugging message via MMP UART3"
|
||||
depends on ARCH_MMP
|
||||
help
|
||||
Say Y here if you want kernel low-level debugging support
|
||||
on MMP UART3.
|
||||
|
||||
config DEBUG_MSM_UART1
|
||||
bool "Kernel low-level debugging messages via MSM UART1"
|
||||
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
||||
|
|
|
|||
|
|
@ -62,35 +62,43 @@
|
|||
|
||||
up {
|
||||
label = "Up";
|
||||
gpios = <&gpx2 0 0 0 2>;
|
||||
gpios = <&gpx2 0 0 0x10000 2>;
|
||||
linux,code = <103>;
|
||||
};
|
||||
|
||||
down {
|
||||
label = "Down";
|
||||
gpios = <&gpx2 1 0 0 2>;
|
||||
gpios = <&gpx2 1 0 0x10000 2>;
|
||||
linux,code = <108>;
|
||||
};
|
||||
|
||||
back {
|
||||
label = "Back";
|
||||
gpios = <&gpx1 7 0 0 2>;
|
||||
gpios = <&gpx1 7 0 0x10000 2>;
|
||||
linux,code = <158>;
|
||||
};
|
||||
|
||||
home {
|
||||
label = "Home";
|
||||
gpios = <&gpx1 6 0 0 2>;
|
||||
gpios = <&gpx1 6 0 0x10000 2>;
|
||||
linux,code = <102>;
|
||||
};
|
||||
|
||||
menu {
|
||||
label = "Menu";
|
||||
gpios = <&gpx1 5 0 0 2>;
|
||||
gpios = <&gpx1 5 0 0x10000 2>;
|
||||
linux,code = <139>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
status {
|
||||
gpios = <&gpx1 3 0 0x10000 2>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
keypad@100A0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -85,6 +85,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8
|
|||
CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_I2C_SH_MOBILE=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_MEDIA_SUPPORT=y
|
||||
|
|
@ -120,6 +121,8 @@ CONFIG_USB_ETH=m
|
|||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHI=y
|
||||
CONFIG_MMC_SH_MMCIF=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_S35390A=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_SH_DMAE=y
|
||||
CONFIG_UIO=y
|
||||
|
|
|
|||
|
|
@ -68,6 +68,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
|||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_RCAR_THERMAL=y
|
||||
CONFIG_SSB=y
|
||||
# CONFIG_HID_SUPPORT is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@ CONFIG_PREEMPT=y
|
|||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
|
||||
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
|
|
@ -90,6 +90,9 @@ CONFIG_DEBUG_INFO=y
|
|||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
# CONFIG_DYNAMIC_DEBUG is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_DEBUG_MMP_UART3=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRC_CCITT=y
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ CONFIG_PREEMPT=y
|
|||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
|
||||
CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
|
|
@ -66,5 +66,7 @@ CONFIG_DEBUG_INFO=y
|
|||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_DEBUG_MMP_UART2=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_CRC_CCITT=y
|
||||
|
|
|
|||
|
|
@ -221,6 +221,7 @@ config MACH_SMDKV310
|
|||
select EXYNOS4_SETUP_KEYPAD
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select S3C24XX_PWM
|
||||
help
|
||||
Machine support for Samsung SMDKV310
|
||||
|
||||
|
|
@ -348,6 +349,7 @@ config MACH_ORIGEN
|
|||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select S3C24XX_PWM
|
||||
help
|
||||
Machine support for ORIGEN based on Samsung EXYNOS4210
|
||||
|
||||
|
|
@ -383,6 +385,7 @@ config MACH_SMDK4212
|
|||
select EXYNOS4_SETUP_KEYPAD
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select S3C24XX_PWM
|
||||
help
|
||||
Machine support for Samsung SMDK4212
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/pwm_backlight.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/i2c.h>
|
||||
|
|
@ -614,6 +615,10 @@ static struct platform_device origen_lcd_hv070wsa = {
|
|||
.dev.platform_data = &origen_lcd_hv070wsa_data,
|
||||
};
|
||||
|
||||
static struct pwm_lookup origen_pwm_lookup[] = {
|
||||
PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
|
||||
};
|
||||
|
||||
#ifdef CONFIG_DRM_EXYNOS
|
||||
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
|
||||
.panel = {
|
||||
|
|
@ -798,6 +803,7 @@ static void __init origen_machine_init(void)
|
|||
|
||||
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
|
||||
|
||||
pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
|
||||
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
|
||||
|
||||
origen_bt_setup();
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@
|
|||
#include <linux/mfd/max8997.h>
|
||||
#include <linux/mmc/host.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/pwm_backlight.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/serial_core.h>
|
||||
|
|
@ -222,6 +223,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
|
|||
.pwm_period_ns = 1000,
|
||||
};
|
||||
|
||||
static struct pwm_lookup smdk4x12_pwm_lookup[] = {
|
||||
PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
|
||||
};
|
||||
|
||||
static uint32_t smdk4x12_keymap[] __initdata = {
|
||||
/* KEY(row, col, keycode) */
|
||||
KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
|
||||
|
|
@ -349,6 +354,7 @@ static void __init smdk4x12_machine_init(void)
|
|||
ARRAY_SIZE(smdk4x12_i2c_devs7));
|
||||
|
||||
samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
|
||||
pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
|
||||
|
||||
samsung_keypad_set_platdata(&smdk4x12_keypad_data);
|
||||
|
||||
|
|
|
|||
|
|
@ -18,6 +18,7 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/pwm_backlight.h>
|
||||
#include <linux/platform_data/s3c-hsotg.h>
|
||||
|
||||
|
|
@ -360,6 +361,10 @@ static struct i2c_board_info hdmiphy_info = {
|
|||
I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
|
||||
};
|
||||
|
||||
static struct pwm_lookup smdkv310_pwm_lookup[] = {
|
||||
PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
|
||||
};
|
||||
|
||||
static void s5p_tv_setup(void)
|
||||
{
|
||||
/* direct HPD to HDMI chip */
|
||||
|
|
@ -399,6 +404,8 @@ static void __init smdkv310_machine_init(void)
|
|||
samsung_keypad_set_platdata(&smdkv310_keypad_data);
|
||||
|
||||
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
|
||||
pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
|
||||
|
||||
#ifdef CONFIG_DRM_EXYNOS
|
||||
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
|
||||
exynos4_fimd0_gpio_setup_24bpp();
|
||||
|
|
|
|||
|
|
@ -298,6 +298,7 @@ config MACH_MX27_3DS
|
|||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
|
|
|
|||
|
|
@ -158,6 +158,11 @@ static const int mx27pdk_pins[] __initconst = {
|
|||
PB21_PF_CSI_HSYNC,
|
||||
CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
|
||||
CSI_RESET | GPIO_GPIO | GPIO_OUT,
|
||||
/* SSI4 */
|
||||
PC16_PF_SSI4_FS,
|
||||
PC17_PF_SSI4_RXD,
|
||||
PC18_PF_SSI4_TXD,
|
||||
PC19_PF_SSI4_CLK,
|
||||
};
|
||||
|
||||
static struct gpio mx27_3ds_camera_gpios[] = {
|
||||
|
|
@ -329,13 +334,24 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
|
|||
};
|
||||
|
||||
/* MC13783 */
|
||||
static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
|
||||
.dac_ssi_port = MC13783_SSI1_PORT,
|
||||
.adc_ssi_port = MC13783_SSI1_PORT,
|
||||
};
|
||||
|
||||
static struct mc13xxx_platform_data mc13783_pdata = {
|
||||
.regulators = {
|
||||
.regulators = mx27_3ds_regulators,
|
||||
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
|
||||
|
||||
},
|
||||
.flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
|
||||
.flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
|
||||
MC13XXX_USE_CODEC,
|
||||
.codec = &mx27_3ds_codec,
|
||||
};
|
||||
|
||||
static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
|
||||
.flags = IMX_SSI_DMA | IMX_SSI_NET,
|
||||
};
|
||||
|
||||
/* SPI */
|
||||
|
|
@ -512,6 +528,9 @@ static void __init mx27pdk_init(void)
|
|||
}
|
||||
|
||||
imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
|
||||
imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
|
||||
|
||||
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
|
||||
}
|
||||
|
||||
static void __init mx27pdk_timer_init(void)
|
||||
|
|
|
|||
|
|
@ -21,6 +21,67 @@ config MACH_ACS5K
|
|||
say 'Y' here if you want your kernel to run on the Brivo
|
||||
Systems LLC, ACS-5000 Master board.
|
||||
|
||||
config MACH_LITE300
|
||||
bool "SecureComputing SG300"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
SecureComputing / SnapGear SG300 VPN Internet Router.
|
||||
See http://www.securecomputing.com for more details.
|
||||
|
||||
config MACH_SG310
|
||||
bool "McAfee SG310"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
McAfee / SnapGear SG310 VPN Internet Router.
|
||||
See http://www.mcafee.com for more details.
|
||||
|
||||
config MACH_SE4200
|
||||
bool "SecureComputing SE4200"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
SecureComputing / SnapGear SE4200 Secure Wireless VPN
|
||||
Internet Router.
|
||||
See http://www.securecomputing.com for more details.
|
||||
|
||||
config MACH_CM4002
|
||||
bool "OpenGear CM4002"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the OpenGear
|
||||
CM4002 Secure Access Server. See http://www.opengear.com for
|
||||
more details.
|
||||
|
||||
config MACH_CM4008
|
||||
bool "OpenGear CM4008"
|
||||
select MIGHT_HAVE_PCI
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the OpenGear
|
||||
CM4008 Console Server. See http://www.opengear.com for more
|
||||
details.
|
||||
|
||||
config MACH_CM41xx
|
||||
bool "OpenGear CM41xx"
|
||||
select MIGHT_HAVE_PCI
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the OpenGear
|
||||
CM4016 or CM4048 Console Servers. See http://www.opengear.com for
|
||||
more details.
|
||||
|
||||
config MACH_IM4004
|
||||
bool "OpenGear IM4004"
|
||||
select MIGHT_HAVE_PCI
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the OpenGear
|
||||
IM4004 Secure Access Server. See http://www.opengear.com for
|
||||
more details.
|
||||
|
||||
config MACH_IM42xx
|
||||
bool "OpenGear IM42xx"
|
||||
select MIGHT_HAVE_PCI
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the OpenGear
|
||||
IM4216 or IM4248 Console Servers. See http://www.opengear.com for
|
||||
more details.
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -15,3 +15,11 @@ obj-$(CONFIG_PCI) += pci.o
|
|||
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
|
||||
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
|
||||
obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o
|
||||
obj-$(CONFIG_MACH_LITE300) += board-sg.o
|
||||
obj-$(CONFIG_MACH_SG310) += board-sg.o
|
||||
obj-$(CONFIG_MACH_SE4200) += board-sg.o
|
||||
obj-$(CONFIG_MACH_CM4002) += board-og.o
|
||||
obj-$(CONFIG_MACH_CM4008) += board-og.o
|
||||
obj-$(CONFIG_MACH_CM41xx) += board-og.o
|
||||
obj-$(CONFIG_MACH_IM4004) += board-og.o
|
||||
obj-$(CONFIG_MACH_IM42xx) += board-og.o
|
||||
|
|
|
|||
199
arch/arm/mach-ks8695/board-og.c
Normal file
199
arch/arm/mach-ks8695/board-og.c
Normal file
|
|
@ -0,0 +1,199 @@
|
|||
/*
|
||||
* board-og.c -- support for the OpenGear KS8695 based boards.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <mach/devices.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/gpio-ks8695.h>
|
||||
#include "generic.h"
|
||||
|
||||
static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
if (machine_is_im4004() && (slot == 8))
|
||||
return KS8695_IRQ_EXTERN1;
|
||||
return KS8695_IRQ_EXTERN0;
|
||||
}
|
||||
|
||||
static struct ks8695_pci_cfg __initdata og_pci = {
|
||||
.mode = KS8695_MODE_PCI,
|
||||
.map_irq = og_pci_map_irq,
|
||||
};
|
||||
|
||||
static void __init og_register_pci(void)
|
||||
{
|
||||
/* Initialize the GPIO lines for interrupt mode */
|
||||
ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
/* Cardbus Slot */
|
||||
if (machine_is_im4004())
|
||||
ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
ks8695_init_pci(&og_pci);
|
||||
}
|
||||
|
||||
/*
|
||||
* The PCI bus reset is driven by a dedicated GPIO line. Toggle it here
|
||||
* and bring the PCI bus out of reset.
|
||||
*/
|
||||
static void __init og_pci_bus_reset(void)
|
||||
{
|
||||
unsigned int rstline = 1;
|
||||
|
||||
/* Some boards use a different GPIO as the PCI reset line */
|
||||
if (machine_is_im4004())
|
||||
rstline = 2;
|
||||
else if (machine_is_im42xx())
|
||||
rstline = 0;
|
||||
|
||||
gpio_request(rstline, "PCI reset");
|
||||
gpio_direction_output(rstline, 0);
|
||||
|
||||
/* Drive a reset on the PCI reset line */
|
||||
gpio_set_value(rstline, 1);
|
||||
gpio_set_value(rstline, 0);
|
||||
mdelay(100);
|
||||
gpio_set_value(rstline, 1);
|
||||
mdelay(100);
|
||||
}
|
||||
|
||||
/*
|
||||
* Direct connect serial ports (non-PCI that is).
|
||||
*/
|
||||
#define S8250_PHYS 0x03800000
|
||||
#define S8250_VIRT 0xf4000000
|
||||
#define S8250_SIZE 0x00100000
|
||||
|
||||
static struct __initdata map_desc og_io_desc[] = {
|
||||
{
|
||||
.virtual = S8250_VIRT,
|
||||
.pfn = __phys_to_pfn(S8250_PHYS),
|
||||
.length = S8250_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}
|
||||
};
|
||||
|
||||
static struct resource og_uart_resources[] = {
|
||||
{
|
||||
.start = S8250_VIRT,
|
||||
.end = S8250_VIRT + S8250_SIZE,
|
||||
.flags = IORESOURCE_MEM
|
||||
},
|
||||
};
|
||||
|
||||
static struct plat_serial8250_port og_uart_data[] = {
|
||||
{
|
||||
.mapbase = S8250_VIRT,
|
||||
.membase = (char *) S8250_VIRT,
|
||||
.irq = 3,
|
||||
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
||||
.iotype = UPIO_MEM,
|
||||
.regshift = 2,
|
||||
.uartclk = 115200 * 16,
|
||||
},
|
||||
{ },
|
||||
};
|
||||
|
||||
static struct platform_device og_uart = {
|
||||
.name = "serial8250",
|
||||
.id = 0,
|
||||
.dev.platform_data = og_uart_data,
|
||||
.num_resources = 1,
|
||||
.resource = og_uart_resources
|
||||
};
|
||||
|
||||
static struct platform_device *og_devices[] __initdata = {
|
||||
&og_uart
|
||||
};
|
||||
|
||||
static void __init og_init(void)
|
||||
{
|
||||
ks8695_register_gpios();
|
||||
|
||||
if (machine_is_cm4002()) {
|
||||
ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH);
|
||||
iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc));
|
||||
platform_add_devices(og_devices, ARRAY_SIZE(og_devices));
|
||||
} else {
|
||||
og_pci_bus_reset();
|
||||
og_register_pci();
|
||||
}
|
||||
|
||||
ks8695_add_device_lan();
|
||||
ks8695_add_device_wan();
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MACH_CM4002
|
||||
MACHINE_START(CM4002, "OpenGear/CM4002")
|
||||
/* OpenGear Inc. */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = og_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_CM4008
|
||||
MACHINE_START(CM4008, "OpenGear/CM4008")
|
||||
/* OpenGear Inc. */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = og_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_CM41xx
|
||||
MACHINE_START(CM41XX, "OpenGear/CM41xx")
|
||||
/* OpenGear Inc. */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = og_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_IM4004
|
||||
MACHINE_START(IM4004, "OpenGear/IM4004")
|
||||
/* OpenGear Inc. */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = og_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_IM42xx
|
||||
MACHINE_START(IM42XX, "OpenGear/IM42xx")
|
||||
/* OpenGear Inc. */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = og_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
121
arch/arm/mach-ks8695/board-sg.c
Normal file
121
arch/arm/mach-ks8695/board-sg.c
Normal file
|
|
@ -0,0 +1,121 @@
|
|||
/*
|
||||
* board-sg.c -- support for the SnapGear KS8695 based boards
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/map.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/devices.h>
|
||||
#include "generic.h"
|
||||
|
||||
/*
|
||||
* The SG310 machine type is fitted with a conventional 8MB Strataflash
|
||||
* device. Define its partitioning.
|
||||
*/
|
||||
#define FL_BASE 0x02000000
|
||||
#define FL_SIZE SZ_8M
|
||||
|
||||
static struct mtd_partition sg_mtd_partitions[] = {
|
||||
[0] = {
|
||||
.name = "SnapGear Boot Loader",
|
||||
.size = SZ_128K,
|
||||
},
|
||||
[1] = {
|
||||
.name = "SnapGear non-volatile configuration",
|
||||
.size = SZ_512K,
|
||||
.offset = SZ_256K,
|
||||
},
|
||||
[2] = {
|
||||
.name = "SnapGear image",
|
||||
.offset = SZ_512K + SZ_256K,
|
||||
},
|
||||
[3] = {
|
||||
.name = "SnapGear StrataFlash",
|
||||
},
|
||||
[4] = {
|
||||
.name = "SnapGear Boot Tags",
|
||||
.size = SZ_128K,
|
||||
.offset = SZ_128K,
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data sg_mtd_pdata = {
|
||||
.width = 1,
|
||||
.nr_parts = ARRAY_SIZE(sg_mtd_partitions),
|
||||
.parts = sg_mtd_partitions,
|
||||
};
|
||||
|
||||
|
||||
static struct resource sg_mtd_resource[] = {
|
||||
[0] = {
|
||||
.start = FL_BASE,
|
||||
.end = FL_BASE + FL_SIZE - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device sg_mtd_device = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(sg_mtd_resource),
|
||||
.resource = sg_mtd_resource,
|
||||
.dev = {
|
||||
.platform_data = &sg_mtd_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init sg_init(void)
|
||||
{
|
||||
ks8695_add_device_lan();
|
||||
ks8695_add_device_wan();
|
||||
|
||||
if (machine_is_sg310())
|
||||
platform_device_register(&sg_mtd_device);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MACH_LITE300
|
||||
MACHINE_START(LITE300, "SecureComputing/SG300")
|
||||
/* SnapGear */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = sg_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_SG310
|
||||
MACHINE_START(SG310, "McAfee/SG310")
|
||||
/* SnapGear */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = sg_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_SE4200
|
||||
MACHINE_START(SE4200, "SecureComputing/SE4200")
|
||||
/* SnapGear */
|
||||
.atag_offset = 0x100,
|
||||
.map_io = ks8695_map_io,
|
||||
.init_irq = ks8695_init_irq,
|
||||
.init_machine = sg_init,
|
||||
.timer = &ks8695_timer,
|
||||
.restart = ks8695_restart,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
|
@ -9,13 +9,21 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_DEBUG_MMP_UART2)
|
||||
#define MMP_UART_OFFSET 0x00017000
|
||||
#elif defined(CONFIG_DEBUG_MMP_UART3)
|
||||
#define MMP_UART_OFFSET 0x00018000
|
||||
#else
|
||||
#error "Select uart for DEBUG_LL"
|
||||
#endif
|
||||
|
||||
#include <mach/addr-map.h>
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
ldr \rp, =APB_PHYS_BASE @ physical
|
||||
ldr \rv, =APB_VIRT_BASE @ virtual
|
||||
orr \rp, \rp, #0x00017000
|
||||
orr \rv, \rv, #0x00017000
|
||||
orr \rp, \rp, #MMP_UART_OFFSET
|
||||
orr \rv, \rv, #MMP_UART_OFFSET
|
||||
.endm
|
||||
|
||||
#define UART_SHIFT 2
|
||||
|
|
|
|||
|
|
@ -177,12 +177,22 @@ static struct mv_usb_platform_data ttc_usb_pdata = {
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MTD_NAND_PXA3xx
|
||||
static struct pxa3xx_nand_platform_data dkb_nand_info = {
|
||||
.enable_arbiter = 1,
|
||||
.num_cs = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
static void __init ttc_dkb_init(void)
|
||||
{
|
||||
mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
|
||||
|
||||
/* on-chip devices */
|
||||
pxa910_add_uart(1);
|
||||
#ifdef CONFIG_MTD_NAND_PXA3xx
|
||||
pxa910_add_nand(&dkb_nand_info);
|
||||
#endif
|
||||
|
||||
/* off-chip devices */
|
||||
pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
|
||||
|
|
|
|||
|
|
@ -1,8 +1,12 @@
|
|||
if ARCH_MSM
|
||||
|
||||
comment "Qualcomm MSM SoC Type"
|
||||
depends on (ARCH_MSM8X60 || ARCH_MSM8960)
|
||||
|
||||
choice
|
||||
prompt "Qualcomm MSM SoC Type"
|
||||
default ARCH_MSM7X00A
|
||||
depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
|
||||
|
||||
config ARCH_MSM7X00A
|
||||
bool "MSM7x00A / MSM7x01A"
|
||||
|
|
@ -36,6 +40,8 @@ config ARCH_QSD8X50
|
|||
select GPIO_MSM_V1
|
||||
select MSM_PROC_COMM
|
||||
|
||||
endchoice
|
||||
|
||||
config ARCH_MSM8X60
|
||||
bool "MSM8X60"
|
||||
select ARCH_MSM_SCORPIONMP
|
||||
|
|
@ -57,8 +63,6 @@ config ARCH_MSM8960
|
|||
select MSM_SCM if SMP
|
||||
select USE_OF
|
||||
|
||||
endchoice
|
||||
|
||||
config MSM_HAS_DEBUG_UART_HS
|
||||
bool
|
||||
|
||||
|
|
|
|||
|
|
@ -41,21 +41,10 @@
|
|||
#define MSM8X60_QGIC_CPU_PHYS 0x02081000
|
||||
#define MSM8X60_QGIC_CPU_SIZE SZ_4K
|
||||
|
||||
#define MSM_ACC_BASE IOMEM(0xF0002000)
|
||||
#define MSM_ACC_PHYS 0x02001000
|
||||
#define MSM_ACC_SIZE SZ_4K
|
||||
|
||||
#define MSM_GCC_BASE IOMEM(0xF0003000)
|
||||
#define MSM_GCC_PHYS 0x02082000
|
||||
#define MSM_GCC_SIZE SZ_4K
|
||||
|
||||
#define MSM_TLMM_BASE IOMEM(0xF0004000)
|
||||
#define MSM_TLMM_PHYS 0x00800000
|
||||
#define MSM_TLMM_SIZE SZ_16K
|
||||
|
||||
#define MSM_SHARED_RAM_BASE IOMEM(0xF0100000)
|
||||
#define MSM_SHARED_RAM_SIZE SZ_1M
|
||||
|
||||
#define MSM8X60_TMR_PHYS 0x02000000
|
||||
#define MSM8X60_TMR_SIZE SZ_4K
|
||||
|
||||
|
|
|
|||
|
|
@ -41,12 +41,11 @@
|
|||
#include "msm_iomap-7x30.h"
|
||||
#elif defined(CONFIG_ARCH_QSD8X50)
|
||||
#include "msm_iomap-8x50.h"
|
||||
#elif defined(CONFIG_ARCH_MSM8X60)
|
||||
#include "msm_iomap-8x60.h"
|
||||
#else
|
||||
#include "msm_iomap-7x00.h"
|
||||
#endif
|
||||
|
||||
#include "msm_iomap-8x60.h"
|
||||
#include "msm_iomap-8960.h"
|
||||
|
||||
#define MSM_DEBUG_UART_SIZE SZ_4K
|
||||
|
|
|
|||
|
|
@ -111,8 +111,6 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
|
|||
MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60),
|
||||
MSM_CHIP_DEVICE(TMR, MSM8X60),
|
||||
MSM_CHIP_DEVICE(TMR0, MSM8X60),
|
||||
MSM_DEVICE(ACC),
|
||||
MSM_DEVICE(GCC),
|
||||
#ifdef CONFIG_DEBUG_MSM8660_UART
|
||||
MSM_DEVICE(DEBUG_UART),
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@
|
|||
#include <linux/mfd/wm831x/irq.h>
|
||||
#include <linux/mfd/wm831x/gpio.h>
|
||||
#include <linux/mfd/wm8994/pdata.h>
|
||||
#include <linux/mfd/arizona/pdata.h>
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
|
|
@ -181,9 +182,33 @@ static const struct i2c_board_info wm1277_devs[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static const struct i2c_board_info wm5102_devs[] = {
|
||||
{ I2C_BOARD_INFO("wm5102", 0x1a),
|
||||
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
|
||||
static struct arizona_pdata wm5102_pdata = {
|
||||
.ldoena = S3C64XX_GPN(7),
|
||||
.gpio_base = CODEC_GPIO_BASE,
|
||||
.irq_active_high = true,
|
||||
.micd_pol_gpio = CODEC_GPIO_BASE + 4,
|
||||
.gpio_defaults = {
|
||||
[2] = 0x10000, /* AIF3TXLRCLK */
|
||||
[3] = 0x4, /* OPCLK */
|
||||
},
|
||||
};
|
||||
|
||||
static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
|
||||
.line = S3C64XX_GPN(5),
|
||||
};
|
||||
|
||||
static struct spi_board_info wm5102_spi_devs[] = {
|
||||
[0] = {
|
||||
.modalias = "wm5102",
|
||||
.max_speed_hz = 10 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.mode = SPI_MODE_0,
|
||||
.irq = GLENFARCLAS_PMIC_IRQ_BASE +
|
||||
WM831X_IRQ_GPIO_2,
|
||||
.controller_data = &wm5102_spi_csinfo,
|
||||
.platform_data = &wm5102_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct i2c_board_info wm6230_i2c_devs[] = {
|
||||
|
|
@ -223,8 +248,9 @@ static __devinitdata const struct {
|
|||
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
|
||||
{ .id = 0x3d, .name = "1277-EV1 Littlemill",
|
||||
.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
|
||||
{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
|
||||
.i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
|
||||
{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut",
|
||||
.spi_devs = wm5102_spi_devs,
|
||||
.num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
|
||||
};
|
||||
|
||||
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
|
||||
|
|
|
|||
|
|
@ -287,6 +287,16 @@ static struct platform_device littlemill_device = {
|
|||
.id = -1,
|
||||
};
|
||||
|
||||
static struct platform_device bells_wm5102_device = {
|
||||
.name = "bells",
|
||||
.id = 0,
|
||||
};
|
||||
|
||||
static struct platform_device bells_wm5110_device = {
|
||||
.name = "bells",
|
||||
.id = 1,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply wallvdd_consumers[] = {
|
||||
REGULATOR_SUPPLY("SPKVDD", "1-001a"),
|
||||
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
|
||||
|
|
@ -359,6 +369,8 @@ static struct platform_device *crag6410_devices[] __initdata = {
|
|||
&tobermory_device,
|
||||
&littlemill_device,
|
||||
&lowland_device,
|
||||
&bells_wm5102_device,
|
||||
&bells_wm5110_device,
|
||||
&wallvdd_device,
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -37,6 +37,7 @@
|
|||
#include <linux/mmc/host.h>
|
||||
#include <linux/mmc/sh_mmcif.h>
|
||||
#include <linux/mmc/sh_mobile_sdhi.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
#include <mach/common.h>
|
||||
#include <mach/irqs.h>
|
||||
#include <mach/r8a7740.h>
|
||||
|
|
@ -877,6 +878,21 @@ static struct platform_device fsi_hdmi_device = {
|
|||
},
|
||||
};
|
||||
|
||||
/* RTC: RTC connects i2c-gpio. */
|
||||
static struct i2c_gpio_platform_data i2c_gpio_data = {
|
||||
.sda_pin = GPIO_PORT208,
|
||||
.scl_pin = GPIO_PORT91,
|
||||
.udelay = 5, /* 100 kHz */
|
||||
};
|
||||
|
||||
static struct platform_device i2c_gpio_device = {
|
||||
.name = "i2c-gpio",
|
||||
.id = 2,
|
||||
.dev = {
|
||||
.platform_data = &i2c_gpio_data,
|
||||
},
|
||||
};
|
||||
|
||||
/* I2C */
|
||||
static struct i2c_board_info i2c0_devices[] = {
|
||||
{
|
||||
|
|
@ -888,6 +904,13 @@ static struct i2c_board_info i2c0_devices[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct i2c_board_info i2c2_devices[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("s35390a", 0x30),
|
||||
.type = "s35390a",
|
||||
},
|
||||
};
|
||||
|
||||
/*
|
||||
* board devices
|
||||
*/
|
||||
|
|
@ -904,6 +927,7 @@ static struct platform_device *eva_devices[] __initdata = {
|
|||
&fsi_device,
|
||||
&fsi_wm8978_device,
|
||||
&fsi_hdmi_device,
|
||||
&i2c_gpio_device,
|
||||
};
|
||||
|
||||
static void __init eva_clock_init(void)
|
||||
|
|
@ -1174,6 +1198,7 @@ static void __init eva_init(void)
|
|||
#endif
|
||||
|
||||
i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
|
||||
i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
|
||||
|
||||
r8a7740_add_standard_devices();
|
||||
|
||||
|
|
|
|||
|
|
@ -30,6 +30,8 @@
|
|||
#include <linux/regulator/fixed.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/smsc911x.h>
|
||||
#include <linux/mmc/sh_mobile_sdhi.h>
|
||||
#include <linux/mfd/tmio.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/r8a7779.h>
|
||||
#include <mach/common.h>
|
||||
|
|
@ -39,6 +41,12 @@
|
|||
#include <asm/hardware/gic.h>
|
||||
#include <asm/traps.h>
|
||||
|
||||
/* Fixed 3.3V regulator to be used by SDHI0 */
|
||||
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
|
||||
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
|
||||
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
|
||||
};
|
||||
|
||||
/* Dummy supplies, where voltage doesn't matter */
|
||||
static struct regulator_consumer_supply dummy_supplies[] = {
|
||||
REGULATOR_SUPPLY("vddvario", "smsc911x"),
|
||||
|
|
@ -75,13 +83,61 @@ static struct platform_device eth_device = {
|
|||
.num_resources = ARRAY_SIZE(smsc911x_resources),
|
||||
};
|
||||
|
||||
static struct resource sdhi0_resources[] = {
|
||||
[0] = {
|
||||
.name = "sdhi0",
|
||||
.start = 0xffe4c000,
|
||||
.end = 0xffe4c0ff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = gic_spi(104),
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct sh_mobile_sdhi_info sdhi0_platform_data = {
|
||||
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
|
||||
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
|
||||
};
|
||||
|
||||
static struct platform_device sdhi0_device = {
|
||||
.name = "sh_mobile_sdhi",
|
||||
.num_resources = ARRAY_SIZE(sdhi0_resources),
|
||||
.resource = sdhi0_resources,
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &sdhi0_platform_data,
|
||||
}
|
||||
};
|
||||
|
||||
/* Thermal */
|
||||
static struct resource thermal_resources[] = {
|
||||
[0] = {
|
||||
.start = 0xFFC48000,
|
||||
.end = 0xFFC48038 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device thermal_device = {
|
||||
.name = "rcar_thermal",
|
||||
.resource = thermal_resources,
|
||||
.num_resources = ARRAY_SIZE(thermal_resources),
|
||||
};
|
||||
|
||||
static struct platform_device *marzen_devices[] __initdata = {
|
||||
ð_device,
|
||||
&sdhi0_device,
|
||||
&thermal_device,
|
||||
};
|
||||
|
||||
static void __init marzen_init(void)
|
||||
{
|
||||
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
||||
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
|
||||
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
||||
regulator_register_fixed(1, dummy_supplies,
|
||||
ARRAY_SIZE(dummy_supplies));
|
||||
|
||||
r8a7779_pinmux_init();
|
||||
|
||||
|
|
@ -97,6 +153,16 @@ static void __init marzen_init(void)
|
|||
gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
|
||||
gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
|
||||
|
||||
/* SD0 (CN20) */
|
||||
gpio_request(GPIO_FN_SD0_CLK, NULL);
|
||||
gpio_request(GPIO_FN_SD0_CMD, NULL);
|
||||
gpio_request(GPIO_FN_SD0_DAT0, NULL);
|
||||
gpio_request(GPIO_FN_SD0_DAT1, NULL);
|
||||
gpio_request(GPIO_FN_SD0_DAT2, NULL);
|
||||
gpio_request(GPIO_FN_SD0_DAT3, NULL);
|
||||
gpio_request(GPIO_FN_SD0_CD, NULL);
|
||||
gpio_request(GPIO_FN_SD0_WP, NULL);
|
||||
|
||||
r8a7779_add_standard_devices();
|
||||
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in a new issue