zd1211rw: Use DMA-aware buffer for usb transfer

The zd1211rw driver uses unaligned stack buffer for USB control
message.  But it might cause stack corruption on non-coherent
platform, such as MIPS.  Use DMA-aware buffers for USB transfer.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Atsushi Nemoto 2008-05-16 17:27:05 +09:00 committed by John W. Linville
parent e039fa4a41
commit a8c4ea7a10

View file

@ -169,10 +169,11 @@ static int upload_code(struct usb_device *udev,
if (flags & REBOOT) {
u8 ret;
/* Use "DMA-aware" buffer. */
r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
USB_REQ_FIRMWARE_CONFIRM,
USB_DIR_IN | USB_TYPE_VENDOR,
0, 0, &ret, sizeof(ret), 5000 /* ms */);
0, 0, p, sizeof(ret), 5000 /* ms */);
if (r != sizeof(ret)) {
dev_err(&udev->dev,
"control request firmeware confirmation failed."
@ -181,6 +182,7 @@ static int upload_code(struct usb_device *udev,
r = -ENODEV;
goto error;
}
ret = p[0];
if (ret & 0x80) {
dev_err(&udev->dev,
"Internal error while downloading."
@ -312,22 +314,31 @@ int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len)
{
int r;
struct usb_device *udev = zd_usb_to_usbdev(usb);
u8 *buf;
/* Use "DMA-aware" buffer. */
buf = kmalloc(len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
USB_REQ_FIRMWARE_READ_DATA, USB_DIR_IN | 0x40, addr, 0,
data, len, 5000);
buf, len, 5000);
if (r < 0) {
dev_err(&udev->dev,
"read over firmware interface failed: %d\n", r);
return r;
goto exit;
} else if (r != len) {
dev_err(&udev->dev,
"incomplete read over firmware interface: %d/%d\n",
r, len);
return -EIO;
r = -EIO;
goto exit;
}
return 0;
r = 0;
memcpy(data, buf, len);
exit:
kfree(buf);
return r;
}
#define urb_dev(urb) (&(urb)->dev->dev)