sched/isolation: Eliminate NO_HZ_FULL_ALL

Commit 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")
broke CONFIG_NO_HZ_FULL_ALL=y kernels.  This breakage is due to the code
under CONFIG_NO_HZ_FULL_ALL failing to invoke the shiny new housekeeping
functions.  This means that rcutorture scenario TREE04 now emits RCU CPU
stall warnings due to the RCU grace-period kthreads not being awakened
at a time of their choosing, or perhaps even not at all:

[   27.731422] rcu_bh kthread starved for 21001 jiffies! g18446744073709551369 c18446744073709551368 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=3
[   27.731423] rcu_bh          I14936     9      2 0x80080000
[   27.731435] Call Trace:
[   27.731440]  __schedule+0x31a/0x6d0
[   27.731442]  schedule+0x31/0x80
[   27.731446]  schedule_timeout+0x15a/0x320
[   27.731453]  ? call_timer_fn+0x130/0x130
[   27.731457]  rcu_gp_kthread+0x66c/0xea0
[   27.731458]  ? rcu_gp_kthread+0x66c/0xea0

Because no one has complained about CONFIG_NO_HZ_FULL_ALL=y being broken,
I hypothesize that no one is in fact using it, other than rcutorture.
This commit therefore eliminates CONFIG_NO_HZ_FULL_ALL and updates
rcutorture's config files to instead use the nohz_full= kernel parameter
to put the desired CPUs into nohz_full mode.

Fixes: 6f1982fedd ("sched/isolation: Handle the nohz_full= parameter")

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>

Documentation/timers/NO_HZ.txt

@@ -131,13 +131,6 @@ error message, and the boot CPU will be removed from the mask.  Note that
 this means that your system must have at least two CPUs in order for
 CONFIG_NO_HZ_FULL=y to do anything for you.
 
-Alternatively, the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter specifies
-that all CPUs other than the boot CPU are adaptive-ticks CPUs.  This
-Kconfig parameter will be overridden by the "nohz_full=" boot parameter,
-so that if both the CONFIG_NO_HZ_FULL_ALL=y Kconfig parameter and
-the "nohz_full=1" boot parameter is specified, the boot parameter will
-prevail so that only CPU 1 will be an adaptive-ticks CPU.
-
 Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
 This is covered in the "RCU IMPLICATIONS" section below.
 

kernel/time/Kconfig

@@ -113,16 +113,6 @@ config NO_HZ_FULL
 
 endchoice
 
-config NO_HZ_FULL_ALL
-       bool "Full dynticks system on all CPUs by default (except CPU 0)"
-       depends on NO_HZ_FULL
-       help
-         If the user doesn't pass the nohz_full boot option to
-	 define the range of full dynticks CPUs, consider that all
-	 CPUs in the system are full dynticks by default.
-	 Note the boot CPU will still be kept outside the range to
-	 handle the timekeeping duty.
-
 config NO_HZ
 	bool "Old Idle dynticks config"
 	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS

kernel/time/tick-sched.c

@@ -405,30 +405,12 @@ static int tick_nohz_cpu_down(unsigned int cpu)
 	return 0;
 }
 
-static int tick_nohz_init_all(void)
-{
-	int err = -1;
-
-#ifdef CONFIG_NO_HZ_FULL_ALL
-	if (!alloc_cpumask_var(&tick_nohz_full_mask, GFP_KERNEL)) {
-		WARN(1, "NO_HZ: Can't allocate full dynticks cpumask\n");
-		return err;
-	}
-	err = 0;
-	cpumask_setall(tick_nohz_full_mask);
-	tick_nohz_full_running = true;
-#endif
-	return err;
-}
-
 void __init tick_nohz_init(void)
 {
 	int cpu, ret;
 
-	if (!tick_nohz_full_running) {
+	if (!tick_nohz_full_running)
-		if (tick_nohz_init_all() < 0)
+		return;
-			return;
-	}
 
 	/*
 	 * Full dynticks uses irq work to drive the tick rescheduling on safe

tools/testing/selftests/rcutorture/configs/rcu/TASKS03

@@ -9,5 +9,4 @@ CONFIG_PREEMPT=y
 CONFIG_HZ_PERIODIC=n
 CONFIG_NO_HZ_IDLE=n
 CONFIG_NO_HZ_FULL=y
-CONFIG_NO_HZ_FULL_ALL=y
 #CHECK#CONFIG_RCU_EXPERT=n

tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot

@@ -1 +1 @@
-rcutorture.torture_type=tasks
+rcutorture.torture_type=tasks nohz_full=1

tools/testing/selftests/rcutorture/configs/rcu/TREE04

@@ -7,7 +7,6 @@ CONFIG_PREEMPT=n
 CONFIG_HZ_PERIODIC=n
 CONFIG_NO_HZ_IDLE=n
 CONFIG_NO_HZ_FULL=y
-CONFIG_NO_HZ_FULL_ALL=y
 CONFIG_RCU_FAST_NO_HZ=y
 CONFIG_RCU_TRACE=y
 CONFIG_HOTPLUG_CPU=n

tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot

@@ -1 +1 @@
-rcutorture.torture_type=rcu_bh rcutree.rcu_fanout_leaf=4
+rcutorture.torture_type=rcu_bh rcutree.rcu_fanout_leaf=4 nohz_full=1-7

tools/testing/selftests/rcutorture/configs/rcu/TREE07

@@ -7,7 +7,6 @@ CONFIG_PREEMPT=n
 CONFIG_HZ_PERIODIC=n
 CONFIG_NO_HZ_IDLE=n
 CONFIG_NO_HZ_FULL=y
-CONFIG_NO_HZ_FULL_ALL=n
 CONFIG_RCU_FAST_NO_HZ=n
 CONFIG_RCU_TRACE=y
 CONFIG_HOTPLUG_CPU=y