mtd: remove the tqm8xxl map driver
This driver depends on the CONFIG_TQM8xxL symbol, which is not defined anywhere, which means that this driver is dead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Artem Bityutskiy
David Woodhouse
parent
83bfc0d1a7
commit
a312c87ab0
3 changed files with 0 additions and 260 deletions
|
|
@ -274,16 +274,6 @@ config MTD_L440GX
|
|||
|
||||
BE VERY CAREFUL.
|
||||
|
||||
config MTD_TQM8XXL
|
||||
tristate "CFI Flash device mapped on TQM8XXL"
|
||||
depends on MTD_CFI && TQM8xxL
|
||||
help
|
||||
The TQM8xxL PowerPC board has up to two banks of CFI-compliant
|
||||
chips, currently uses AMD one. This 'mapping' driver supports
|
||||
that arrangement, allowing the CFI probe and command set driver
|
||||
code to communicate with the chips on the TQM8xxL board. More at
|
||||
<http://www.denx.de/wiki/PPCEmbedded/>.
|
||||
|
||||
config MTD_CFI_FLAGADM
|
||||
tristate "CFI Flash device mapping on FlagaDM"
|
||||
depends on 8xx && MTD_CFI
|
||||
|
|
|
|||
|
|
@ -23,7 +23,6 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
|
|||
obj-$(CONFIG_MTD_PISMO) += pismo.o
|
||||
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
|
||||
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
|
||||
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
|
||||
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
|
||||
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
|
||||
obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o
|
||||
|
|
|
|||
|
|
@ -1,249 +0,0 @@
|
|||
/*
|
||||
* Handle mapping of the flash memory access routines
|
||||
* on TQM8xxL based devices.
|
||||
*
|
||||
* based on rpxlite.c
|
||||
*
|
||||
* Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
|
||||
*
|
||||
* This code is GPLed
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* According to TQM8xxL hardware manual, TQM8xxL series have
|
||||
* following flash memory organisations:
|
||||
* | capacity | | chip type | | bank0 | | bank1 |
|
||||
* 2MiB 512Kx16 2MiB 0
|
||||
* 4MiB 1Mx16 4MiB 0
|
||||
* 8MiB 1Mx16 4MiB 4MiB
|
||||
* Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at
|
||||
* kernel configuration.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/map.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
|
||||
#define FLASH_ADDR 0x40000000
|
||||
#define FLASH_SIZE 0x00800000
|
||||
#define FLASH_BANK_MAX 4
|
||||
|
||||
// trivial struct to describe partition information
|
||||
struct mtd_part_def
|
||||
{
|
||||
int nums;
|
||||
unsigned char *type;
|
||||
struct mtd_partition* mtd_part;
|
||||
};
|
||||
|
||||
//static struct mtd_info *mymtd;
|
||||
static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
|
||||
static struct map_info* map_banks[FLASH_BANK_MAX];
|
||||
static struct mtd_part_def part_banks[FLASH_BANK_MAX];
|
||||
static unsigned long num_banks;
|
||||
static void __iomem *start_scan_addr;
|
||||
|
||||
/*
|
||||
* Here are partition information for all known TQM8xxL series devices.
|
||||
* See include/linux/mtd/partitions.h for definition of the mtd_partition
|
||||
* structure.
|
||||
*
|
||||
* The *_max_flash_size is the maximum possible mapped flash size which
|
||||
* is not necessarily the actual flash size. It must correspond to the
|
||||
* value specified in the mapping definition defined by the
|
||||
* "struct map_desc *_io_desc" for the corresponding machine.
|
||||
*/
|
||||
|
||||
/* Currently, TQM8xxL has up to 8MiB flash */
|
||||
static unsigned long tqm8xxl_max_flash_size = 0x00800000;
|
||||
|
||||
/* partition definition for first flash bank
|
||||
* (cf. "drivers/char/flash_config.c")
|
||||
*/
|
||||
static struct mtd_partition tqm8xxl_partitions[] = {
|
||||
{
|
||||
.name = "ppcboot",
|
||||
.offset = 0x00000000,
|
||||
.size = 0x00020000, /* 128KB */
|
||||
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
||||
},
|
||||
{
|
||||
.name = "kernel", /* default kernel image */
|
||||
.offset = 0x00020000,
|
||||
.size = 0x000e0000,
|
||||
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
||||
},
|
||||
{
|
||||
.name = "user",
|
||||
.offset = 0x00100000,
|
||||
.size = 0x00100000,
|
||||
},
|
||||
{
|
||||
.name = "initrd",
|
||||
.offset = 0x00200000,
|
||||
.size = 0x00200000,
|
||||
}
|
||||
};
|
||||
/* partition definition for second flash bank */
|
||||
static struct mtd_partition tqm8xxl_fs_partitions[] = {
|
||||
{
|
||||
.name = "cramfs",
|
||||
.offset = 0x00000000,
|
||||
.size = 0x00200000,
|
||||
},
|
||||
{
|
||||
.name = "jffs",
|
||||
.offset = 0x00200000,
|
||||
.size = 0x00200000,
|
||||
//.size = MTDPART_SIZ_FULL,
|
||||
}
|
||||
};
|
||||
|
||||
static int __init init_tqm_mtd(void)
|
||||
{
|
||||
int idx = 0, ret = 0;
|
||||
unsigned long flash_addr, flash_size, mtd_size = 0;
|
||||
/* pointer to TQM8xxL board info data */
|
||||
bd_t *bd = (bd_t *)__res;
|
||||
|
||||
flash_addr = bd->bi_flashstart;
|
||||
flash_size = bd->bi_flashsize;
|
||||
|
||||
//request maximum flash size address space
|
||||
start_scan_addr = ioremap(flash_addr, flash_size);
|
||||
if (!start_scan_addr) {
|
||||
printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __func__, flash_addr);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
|
||||
if(mtd_size >= flash_size)
|
||||
break;
|
||||
|
||||
printk(KERN_INFO "%s: chip probing count %d\n", __func__, idx);
|
||||
|
||||
map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
|
||||
if(map_banks[idx] == NULL) {
|
||||
ret = -ENOMEM;
|
||||
/* FIXME: What if some MTD devices were probed already? */
|
||||
goto error_mem;
|
||||
}
|
||||
|
||||
map_banks[idx]->name = kmalloc(16, GFP_KERNEL);
|
||||
|
||||
if (!map_banks[idx]->name) {
|
||||
ret = -ENOMEM;
|
||||
/* FIXME: What if some MTD devices were probed already? */
|
||||
goto error_mem;
|
||||
}
|
||||
sprintf(map_banks[idx]->name, "TQM8xxL%d", idx);
|
||||
|
||||
map_banks[idx]->size = flash_size;
|
||||
map_banks[idx]->bankwidth = 4;
|
||||
|
||||
simple_map_init(map_banks[idx]);
|
||||
|
||||
map_banks[idx]->virt = start_scan_addr;
|
||||
map_banks[idx]->phys = flash_addr;
|
||||
/* FIXME: This looks utterly bogus, but I'm trying to
|
||||
preserve the behaviour of the original (shown here)...
|
||||
|
||||
map_banks[idx]->map_priv_1 =
|
||||
start_scan_addr + ((idx > 0) ?
|
||||
(mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
|
||||
*/
|
||||
|
||||
if (idx && mtd_banks[idx-1]) {
|
||||
map_banks[idx]->virt += mtd_banks[idx-1]->size;
|
||||
map_banks[idx]->phys += mtd_banks[idx-1]->size;
|
||||
}
|
||||
|
||||
//start to probe flash chips
|
||||
mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
|
||||
|
||||
if (mtd_banks[idx]) {
|
||||
mtd_banks[idx]->owner = THIS_MODULE;
|
||||
mtd_size += mtd_banks[idx]->size;
|
||||
num_banks++;
|
||||
|
||||
printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __func__, num_banks,
|
||||
mtd_banks[idx]->name, mtd_banks[idx]->size);
|
||||
}
|
||||
}
|
||||
|
||||
/* no supported flash chips found */
|
||||
if (!num_banks) {
|
||||
printk(KERN_NOTICE "TQM8xxL: No support flash chips found!\n");
|
||||
ret = -ENXIO;
|
||||
goto error_mem;
|
||||
}
|
||||
|
||||
/*
|
||||
* Select Static partition definitions
|
||||
*/
|
||||
part_banks[0].mtd_part = tqm8xxl_partitions;
|
||||
part_banks[0].type = "Static image";
|
||||
part_banks[0].nums = ARRAY_SIZE(tqm8xxl_partitions);
|
||||
|
||||
part_banks[1].mtd_part = tqm8xxl_fs_partitions;
|
||||
part_banks[1].type = "Static file system";
|
||||
part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions);
|
||||
|
||||
for(idx = 0; idx < num_banks ; idx++) {
|
||||
if (part_banks[idx].nums == 0)
|
||||
printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx);
|
||||
else
|
||||
printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
|
||||
idx, part_banks[idx].type);
|
||||
mtd_device_register(mtd_banks[idx], part_banks[idx].mtd_part,
|
||||
part_banks[idx].nums);
|
||||
}
|
||||
return 0;
|
||||
error_mem:
|
||||
for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
|
||||
if(map_banks[idx] != NULL) {
|
||||
kfree(map_banks[idx]->name);
|
||||
map_banks[idx]->name = NULL;
|
||||
kfree(map_banks[idx]);
|
||||
map_banks[idx] = NULL;
|
||||
}
|
||||
}
|
||||
error:
|
||||
iounmap(start_scan_addr);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __exit cleanup_tqm_mtd(void)
|
||||
{
|
||||
unsigned int idx = 0;
|
||||
for(idx = 0 ; idx < num_banks ; idx++) {
|
||||
/* destroy mtd_info previously allocated */
|
||||
if (mtd_banks[idx]) {
|
||||
mtd_device_unregister(mtd_banks[idx]);
|
||||
map_destroy(mtd_banks[idx]);
|
||||
}
|
||||
/* release map_info not used anymore */
|
||||
kfree(map_banks[idx]->name);
|
||||
kfree(map_banks[idx]);
|
||||
}
|
||||
|
||||
if (start_scan_addr) {
|
||||
iounmap(start_scan_addr);
|
||||
start_scan_addr = 0;
|
||||
}
|
||||
}
|
||||
|
||||
module_init(init_tqm_mtd);
|
||||
module_exit(cleanup_tqm_mtd);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Kirk Lee <kirk@hpc.ee.ntu.edu.tw>");
|
||||
MODULE_DESCRIPTION("MTD map driver for TQM8xxL boards");
|
||||
Loading…
Reference in a new issue