Merge remote-tracking branches 'spi/topic/devprop', 'spi/topic/fsl', 'spi/topic/fsl-dspi', 'spi/topic/imx' and 'spi/topic/lantiq' into spi-next

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

@@ -23,6 +23,12 @@ See the clock consumer binding,
 Obsolete properties:
 - fsl,spi-num-chipselects : Contains the number of the chipselect
 
+Optional properties:
+- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
+controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
+the SPI_READY mode-flag needs to be set too.
+Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+
 Example:
 
 ecspi@70010000 {
@@ -35,4 +41,5 @@ ecspi@70010000 {
 		   <&gpio3 25 0>; /* GPIO3_25 */
 	dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 	dma-names = "rx", "tx";
+	fsl,spi-rdy-drctl = <1>;
 };

drivers/spi/spi-fsl-dspi.c

@@ -1002,7 +1002,8 @@ static int dspi_probe(struct platform_device *pdev)
 	if (IS_ERR(dspi->regmap)) {
 		dev_err(&pdev->dev, "failed to init regmap: %ld\n",
 				PTR_ERR(dspi->regmap));
-		return PTR_ERR(dspi->regmap);
+		ret = PTR_ERR(dspi->regmap);
+		goto out_master_put;
 	}
 
 	dspi_init(dspi);

drivers/spi/spi-fsl-spi.c

@@ -814,7 +814,7 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
 	struct device_node *np = ofdev->dev.of_node;
 	struct spi_master *master;
 	struct resource mem;
-	int irq, type;
+	int irq = 0, type;
 	int ret = -ENOMEM;
 
 	ret = of_mpc8xxx_spi_probe(ofdev);
@@ -847,6 +847,7 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
 	return 0;
 
 err:
+	irq_dispose_mapping(irq);
 	if (type == TYPE_FSL)
 		of_fsl_spi_free_chipselects(dev);
 	return ret;

drivers/spi/spi-imx.c

@@ -95,6 +95,7 @@ struct spi_imx_data {
 	unsigned int spi_bus_clk;
 
 	unsigned int bytes_per_word;
+	unsigned int spi_drctl;
 
 	unsigned int count;
 	void (*tx)(struct spi_imx_data *);
@@ -246,6 +247,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 #define MX51_ECSPI_CTRL_XCH		(1 <<  2)
 #define MX51_ECSPI_CTRL_SMC		(1 << 3)
 #define MX51_ECSPI_CTRL_MODE_MASK	(0xf << 4)
+#define MX51_ECSPI_CTRL_DRCTL(drctl)	((drctl) << 16)
 #define MX51_ECSPI_CTRL_POSTDIV_OFFSET	8
 #define MX51_ECSPI_CTRL_PREDIV_OFFSET	12
 #define MX51_ECSPI_CTRL_CS(cs)		((cs) << 18)
@@ -355,6 +357,12 @@ static int mx51_ecspi_config(struct spi_device *spi,
 	 */
 	ctrl |= MX51_ECSPI_CTRL_MODE_MASK;
 
+	/*
+	 * Enable SPI_RDY handling (falling edge/level triggered).
+	 */
+	if (spi->mode & SPI_READY)
+		ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl);
+
 	/* set clock speed */
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, config->speed_hz, &clk);
 	spi_imx->spi_bus_clk = clk;
@@ -1173,7 +1181,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct spi_imx_data *spi_imx;
 	struct resource *res;
-	int i, ret, irq;
+	int i, ret, irq, spi_drctl;
 
 	if (!np && !mxc_platform_info) {
 		dev_err(&pdev->dev, "can't get the platform data\n");
@@ -1181,6 +1189,12 @@ static int spi_imx_probe(struct platform_device *pdev)
 	}
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
+	ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl);
+	if ((ret < 0) || (spi_drctl >= 0x3)) {
+		/* '11' is reserved */
+		spi_drctl = 0;
+	}
+
 	if (!master)
 		return -ENOMEM;
 
@@ -1216,7 +1230,9 @@ static int spi_imx_probe(struct platform_device *pdev)
 	spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
 	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 	if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
-		spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
+		spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY;
+
+	spi_imx->spi_drctl = spi_drctl;
 
 	init_completion(&spi_imx->xfer_done);
 

drivers/spi/spi-lantiq-ssc.c

@@ -977,7 +977,6 @@ static struct platform_driver lantiq_ssc_driver = {
 	.remove = lantiq_ssc_remove,
 	.driver = {
 		.name = "spi-lantiq-ssc",
-		.owner = THIS_MODULE,
 		.of_match_table = lantiq_ssc_match,
 	},
 };

drivers/spi/spi.c

@@ -31,6 +31,7 @@
 #include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_domain.h>
+#include <linux/property.h>
 #include <linux/export.h>
 #include <linux/sched/rt.h>
 #include <uapi/linux/sched/types.h>
@@ -600,13 +601,28 @@ struct spi_device *spi_new_device(struct spi_master *master,
 	proxy->controller_data = chip->controller_data;
 	proxy->controller_state = NULL;
 
-	status = spi_add_device(proxy);
-	if (status < 0) {
-		spi_dev_put(proxy);
-		return NULL;
+	if (chip->properties) {
+		status = device_add_properties(&proxy->dev, chip->properties);
+		if (status) {
+			dev_err(&master->dev,
+				"failed to add properties to '%s': %d\n",
+				chip->modalias, status);
+			goto err_dev_put;
+		}
 	}
 
+	status = spi_add_device(proxy);
+	if (status < 0)
+		goto err_remove_props;
+
 	return proxy;
+
+err_remove_props:
+	if (chip->properties)
+		device_remove_properties(&proxy->dev);
+err_dev_put:
+	spi_dev_put(proxy);
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(spi_new_device);
 
@@ -664,6 +680,7 @@ static void spi_match_master_to_boardinfo(struct spi_master *master,
  *
  * The board info passed can safely be __initdata ... but be careful of
  * any embedded pointers (platform_data, etc), they're copied as-is.
+ * Device properties are deep-copied though.
  *
  * Return: zero on success, else a negative error code.
  */
@@ -673,7 +690,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
 	int i;
 
 	if (!n)
-		return -EINVAL;
+		return 0;
 
 	bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
 	if (!bi)
@@ -683,6 +700,13 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
 		struct spi_master *master;
 
 		memcpy(&bi->board_info, info, sizeof(*info));
+		if (info->properties) {
+			bi->board_info.properties =
+					property_entries_dup(info->properties);
+			if (IS_ERR(bi->board_info.properties))
+				return PTR_ERR(bi->board_info.properties);
+		}
+
 		mutex_lock(&board_lock);
 		list_add_tail(&bi->list, &board_list);
 		list_for_each_entry(master, &spi_master_list, list)

include/linux/spi/spi.h

@@ -23,6 +23,7 @@
 #include <linux/scatterlist.h>
 
 struct dma_chan;
+struct property_entry;
 struct spi_master;
 struct spi_transfer;
 struct spi_flash_read_message;
@@ -1209,6 +1210,7 @@ int spi_flash_read(struct spi_device *spi,
  * @modalias: Initializes spi_device.modalias; identifies the driver.
  * @platform_data: Initializes spi_device.platform_data; the particular
  *	data stored there is driver-specific.
+ * @properties: Additional device properties for the device.
  * @controller_data: Initializes spi_device.controller_data; some
  *	controllers need hints about hardware setup, e.g. for DMA.
  * @irq: Initializes spi_device.irq; depends on how the board is wired.
@@ -1241,10 +1243,12 @@ struct spi_board_info {
 	 *
 	 * platform_data goes to spi_device.dev.platform_data,
 	 * controller_data goes to spi_device.controller_data,
+	 * device properties are copied and attached to spi_device,
 	 * irq is copied too
 	 */
 	char		modalias[SPI_NAME_SIZE];
 	const void	*platform_data;
+	const struct property_entry *properties;
 	void		*controller_data;
 	int		irq;