[ARM] 4515/1: S3C: Move uncompress code to plat-s3c
Move the uncompress.h to plat-s3c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
parent
3ec20520dd
commit
a14a26aca6
2 changed files with 166 additions and 131 deletions
|
@ -13,153 +13,33 @@
|
|||
#ifndef __ASM_ARCH_UNCOMPRESS_H
|
||||
#define __ASM_ARCH_UNCOMPRESS_H
|
||||
|
||||
typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
|
||||
|
||||
/* defines for UART registers */
|
||||
#include "asm/plat-s3c/regs-serial.h"
|
||||
#include "asm/arch/regs-gpio.h"
|
||||
#include "asm/plat-s3c/regs-watchdog.h"
|
||||
|
||||
#include <asm/arch/regs-gpio.h>
|
||||
#include <asm/arch/map.h>
|
||||
|
||||
/* working in physical space... */
|
||||
#undef S3C2410_GPIOREG
|
||||
#undef S3C2410_WDOGREG
|
||||
|
||||
#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
|
||||
#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
|
||||
|
||||
#include <asm/plat-s3c/uncompress.h>
|
||||
|
||||
/* how many bytes we allow into the FIFO at a time in FIFO mode */
|
||||
#define FIFO_MAX (14)
|
||||
|
||||
#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
|
||||
|
||||
static __inline__ void
|
||||
uart_wr(unsigned int reg, unsigned int val)
|
||||
static void arch_detect_cpu(void)
|
||||
{
|
||||
volatile unsigned int *ptr;
|
||||
unsigned int cpuid;
|
||||
|
||||
ptr = (volatile unsigned int *)(reg + uart_base);
|
||||
*ptr = val;
|
||||
}
|
||||
|
||||
static __inline__ unsigned int
|
||||
uart_rd(unsigned int reg)
|
||||
{
|
||||
volatile unsigned int *ptr;
|
||||
|
||||
ptr = (volatile unsigned int *)(reg + uart_base);
|
||||
return *ptr;
|
||||
}
|
||||
|
||||
|
||||
/* we can deal with the case the UARTs are being run
|
||||
* in FIFO mode, so that we don't hold up our execution
|
||||
* waiting for tx to happen...
|
||||
*/
|
||||
|
||||
static void putc(int ch)
|
||||
{
|
||||
int cpuid = S3C2410_GSTATUS1_2410;
|
||||
|
||||
#ifndef CONFIG_CPU_S3C2400
|
||||
cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
|
||||
cpuid &= S3C2410_GSTATUS1_IDMASK;
|
||||
#endif
|
||||
|
||||
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
|
||||
int level;
|
||||
|
||||
while (1) {
|
||||
level = uart_rd(S3C2410_UFSTAT);
|
||||
|
||||
if (cpuid == S3C2410_GSTATUS1_2440 ||
|
||||
cpuid == S3C2410_GSTATUS1_2442) {
|
||||
level &= S3C2440_UFSTAT_TXMASK;
|
||||
level >>= S3C2440_UFSTAT_TXSHIFT;
|
||||
} else {
|
||||
level &= S3C2410_UFSTAT_TXMASK;
|
||||
level >>= S3C2410_UFSTAT_TXSHIFT;
|
||||
}
|
||||
|
||||
if (level < FIFO_MAX)
|
||||
break;
|
||||
}
|
||||
|
||||
if (cpuid == S3C2410_GSTATUS1_2440 ||
|
||||
cpuid == S3C2410_GSTATUS1_2442) {
|
||||
fifo_mask = S3C2440_UFSTAT_TXMASK;
|
||||
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
|
||||
} else {
|
||||
/* not using fifos */
|
||||
|
||||
while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
|
||||
barrier();
|
||||
fifo_mask = S3C2410_UFSTAT_TXMASK;
|
||||
fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
|
||||
}
|
||||
|
||||
/* write byte to transmission register */
|
||||
uart_wr(S3C2410_UTXH, ch);
|
||||
}
|
||||
|
||||
static inline void flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
|
||||
|
||||
/* CONFIG_S3C2410_BOOT_WATCHDOG
|
||||
*
|
||||
* Simple boot-time watchdog setup, to reboot the system if there is
|
||||
* any problem with the boot process
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_S3C2410_BOOT_WATCHDOG
|
||||
|
||||
#define WDOG_COUNT (0xff00)
|
||||
|
||||
static inline void arch_decomp_wdog(void)
|
||||
{
|
||||
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
|
||||
}
|
||||
|
||||
static void arch_decomp_wdog_start(void)
|
||||
{
|
||||
__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
|
||||
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
|
||||
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
|
||||
}
|
||||
|
||||
#else
|
||||
#define arch_decomp_wdog_start()
|
||||
#define arch_decomp_wdog()
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
|
||||
|
||||
static void arch_decomp_error(const char *x)
|
||||
{
|
||||
putstr("\n\n");
|
||||
putstr(x);
|
||||
putstr("\n\n -- System resetting\n");
|
||||
|
||||
__raw_writel(0x4000, S3C2410_WTDAT);
|
||||
__raw_writel(0x4000, S3C2410_WTCNT);
|
||||
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
|
||||
|
||||
while(1);
|
||||
}
|
||||
|
||||
#define arch_error arch_decomp_error
|
||||
#endif
|
||||
|
||||
static void error(char *err);
|
||||
|
||||
static void
|
||||
arch_decomp_setup(void)
|
||||
{
|
||||
/* we may need to setup the uart(s) here if we are not running
|
||||
* on an BAST... the BAST will have left the uarts configured
|
||||
* after calling linux.
|
||||
*/
|
||||
|
||||
arch_decomp_wdog_start();
|
||||
}
|
||||
|
||||
|
||||
#endif /* __ASM_ARCH_UNCOMPRESS_H */
|
||||
|
|
155
include/asm-arm/plat-s3c/uncompress.h
Normal file
155
include/asm-arm/plat-s3c/uncompress.h
Normal file
|
@ -0,0 +1,155 @@
|
|||
/* linux/include/asm-arm/plat-s3c/uncompress.h
|
||||
*
|
||||
* Copyright 2003, 2007 Simtec Electronics
|
||||
* http://armlinux.simtec.co.uk/
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
* S3C - uncompress code
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_PLAT_UNCOMPRESS_H
|
||||
#define __ASM_PLAT_UNCOMPRESS_H
|
||||
|
||||
typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
|
||||
|
||||
/* uart setup */
|
||||
|
||||
static unsigned int fifo_mask;
|
||||
static unsigned int fifo_max;
|
||||
|
||||
/* forward declerations */
|
||||
|
||||
static void arch_detect_cpu(void);
|
||||
|
||||
/* defines for UART registers */
|
||||
|
||||
#include "asm/plat-s3c/regs-serial.h"
|
||||
#include "asm/plat-s3c/regs-watchdog.h"
|
||||
|
||||
/* working in physical space... */
|
||||
#undef S3C2410_WDOGREG
|
||||
#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
|
||||
|
||||
/* how many bytes we allow into the FIFO at a time in FIFO mode */
|
||||
#define FIFO_MAX (14)
|
||||
|
||||
#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
|
||||
|
||||
static __inline__ void
|
||||
uart_wr(unsigned int reg, unsigned int val)
|
||||
{
|
||||
volatile unsigned int *ptr;
|
||||
|
||||
ptr = (volatile unsigned int *)(reg + uart_base);
|
||||
*ptr = val;
|
||||
}
|
||||
|
||||
static __inline__ unsigned int
|
||||
uart_rd(unsigned int reg)
|
||||
{
|
||||
volatile unsigned int *ptr;
|
||||
|
||||
ptr = (volatile unsigned int *)(reg + uart_base);
|
||||
return *ptr;
|
||||
}
|
||||
|
||||
/* we can deal with the case the UARTs are being run
|
||||
* in FIFO mode, so that we don't hold up our execution
|
||||
* waiting for tx to happen...
|
||||
*/
|
||||
|
||||
static void putc(int ch)
|
||||
{
|
||||
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
|
||||
int level;
|
||||
|
||||
while (1) {
|
||||
level = uart_rd(S3C2410_UFSTAT);
|
||||
level &= fifo_mask;
|
||||
|
||||
if (level < fifo_max)
|
||||
break;
|
||||
}
|
||||
|
||||
} else {
|
||||
/* not using fifos */
|
||||
|
||||
while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
|
||||
barrier();
|
||||
}
|
||||
|
||||
/* write byte to transmission register */
|
||||
uart_wr(S3C2410_UTXH, ch);
|
||||
}
|
||||
|
||||
static inline void flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
|
||||
|
||||
/* CONFIG_S3C2410_BOOT_WATCHDOG
|
||||
*
|
||||
* Simple boot-time watchdog setup, to reboot the system if there is
|
||||
* any problem with the boot process
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_S3C2410_BOOT_WATCHDOG
|
||||
|
||||
#define WDOG_COUNT (0xff00)
|
||||
|
||||
static inline void arch_decomp_wdog(void)
|
||||
{
|
||||
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
|
||||
}
|
||||
|
||||
static void arch_decomp_wdog_start(void)
|
||||
{
|
||||
__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
|
||||
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
|
||||
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
|
||||
}
|
||||
|
||||
#else
|
||||
#define arch_decomp_wdog_start()
|
||||
#define arch_decomp_wdog()
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
|
||||
|
||||
static void arch_decomp_error(const char *x)
|
||||
{
|
||||
putstr("\n\n");
|
||||
putstr(x);
|
||||
putstr("\n\n -- System resetting\n");
|
||||
|
||||
__raw_writel(0x4000, S3C2410_WTDAT);
|
||||
__raw_writel(0x4000, S3C2410_WTCNT);
|
||||
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
|
||||
|
||||
while(1);
|
||||
}
|
||||
|
||||
#define arch_error arch_decomp_error
|
||||
#endif
|
||||
|
||||
static void error(char *err);
|
||||
|
||||
static void
|
||||
arch_decomp_setup(void)
|
||||
{
|
||||
/* we may need to setup the uart(s) here if we are not running
|
||||
* on an BAST... the BAST will have left the uarts configured
|
||||
* after calling linux.
|
||||
*/
|
||||
|
||||
arch_detect_cpu();
|
||||
arch_decomp_wdog_start();
|
||||
}
|
||||
|
||||
|
||||
#endif /* __ASM_PLAT_UNCOMPRESS_H */
|
Loading…
Reference in a new issue