sh: Mass ctrl_in/outX to __raw_read/writeX conversion.

The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt 2010-01-26 12:58:40 +09:00
parent a077e91690
commit 9d56dd3b08
115 changed files with 698 additions and 698 deletions

View file

@ -23,7 +23,7 @@
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Prefer cmdline over RedBoot */
static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
@ -60,33 +60,33 @@ static void __init setup_chip_select(void)
{
/* CS2: LAN (0x08000000 - 0x0bffffff) */
/* no idle cycles, normal space, 8 bit data bus */
ctrl_outl(0x36db0400, CS2BCR);
__raw_writel(0x36db0400, CS2BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
ctrl_outl(0x000003c0, CS2WCR);
__raw_writel(0x000003c0, CS2WCR);
/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
ctrl_outl(0x00000200, CS4BCR);
__raw_writel(0x00000200, CS4BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
ctrl_outl(0x00100981, CS4WCR);
__raw_writel(0x00100981, CS4WCR);
/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
ctrl_outl(0x00000200, CS5ABCR);
__raw_writel(0x00000200, CS5ABCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
ctrl_outl(0x00100981, CS5AWCR);
__raw_writel(0x00100981, CS5AWCR);
/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
ctrl_outl(0x00000200, CS5BBCR);
__raw_writel(0x00000200, CS5BBCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
ctrl_outl(0x00100981, CS5BWCR);
__raw_writel(0x00100981, CS5BWCR);
/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
ctrl_outl(0x00000200, CS6ABCR);
__raw_writel(0x00000200, CS6ABCR);
/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
ctrl_outl(0x001009C1, CS6AWCR);
__raw_writel(0x001009C1, CS6AWCR);
}
static void __init setup_port_multiplexing(void)
@ -94,71 +94,71 @@ static void __init setup_port_multiplexing(void)
/* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
*/
ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
__raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
*/
ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
__raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
*/
ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
__raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
*/
ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
__raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
*/
ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
__raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
*/
ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
__raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
*/
ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
__raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
*/
ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
__raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
*/
ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
__raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
/* K7 (x); K6 (x); K5 (x); K4 (x);
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
*/
ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
__raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
* L3 TCK; L2 (x); L1 (x); L0 (x);
*/
ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
__raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
/* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
* M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
* M1 CS5B(CAN3_CS); M0 GPI+(nc);
*/
ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
__raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
/* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
* LAN_RESET=off, BUZZER=off, LCD_BL=off
*/
#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
ctrl_outb(0x30, PORT_PMDR);
__raw_writeb(0x30, PORT_PMDR);
#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
ctrl_outb(0xF0, PORT_PMDR);
__raw_writeb(0xF0, PORT_PMDR);
#else
#error Unknown revision of PLATFORM_MP_R2
#endif
@ -167,8 +167,8 @@ static void __init setup_port_multiplexing(void)
* P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
* P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
*/
ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
ctrl_outb(0x10, PORT_PPDR);
__raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
__raw_writeb(0x10, PORT_PPDR);
/* R7 A25; R6 A24; R5 A23; R4 A22;
* R3 A21; R2 A20; R1 A19; R0 A0;
@ -185,22 +185,22 @@ static void __init setup_port_multiplexing(void)
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
*/
ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
__raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
*/
ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
__raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
*/
ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
__raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
*/
ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
__raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
}
static void __init mpr2_setup(char **cmdline_p)
@ -209,24 +209,24 @@ static void __init mpr2_setup(char **cmdline_p)
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
*/
ctrl_outw(0xAABC, PORT_PSELA);
__raw_writew(0xAABC, PORT_PSELA);
/* set Pin Select Register B:
* /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
* LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
*/
ctrl_outw(0x3C00, PORT_PSELB);
__raw_writew(0x3C00, PORT_PSELB);
/* set Pin Select Register C:
* SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
*/
ctrl_outw(0x0000, PORT_PSELC);
__raw_writew(0x0000, PORT_PSELC);
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
* Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
*/
ctrl_outw(0x0000, PORT_PSELD);
__raw_writew(0x0000, PORT_PSELD);
/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
ctrl_outw(0x0101, PORT_UTRCTL);
__raw_writew(0x0101, PORT_UTRCTL);
/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
ctrl_outw(0xA5C0, PORT_UCLKCR_W);
__raw_writew(0xA5C0, PORT_UCLKCR_W);
setup_chip_select();

View file

@ -89,15 +89,15 @@ static int __init polaris_initialise(void)
printk(KERN_INFO "Configuring Polaris external bus\n");
/* Configure area 5 with 2 wait states */
wcr = ctrl_inw(WCR2);
wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
wcr |= (WAIT_STATES_10 << 10);
ctrl_outw(wcr, WCR2);
__raw_writew(wcr, WCR2);
/* Configure area 5 for 32-bit access */
bcr_mask = ctrl_inw(BCR2);
bcr_mask = __raw_readw(BCR2);
bcr_mask |= 1 << 10;
ctrl_outw(bcr_mask, BCR2);
__raw_writew(bcr_mask, BCR2);
return platform_add_devices(polaris_devices,
ARRAY_SIZE(polaris_devices));
@ -128,13 +128,13 @@ static struct ipr_desc ipr_irq_desc = {
static void __init init_polaris_irq(void)
{
/* Disable all interrupts */
ctrl_outw(0, BCR_ILCRA);
ctrl_outw(0, BCR_ILCRB);
ctrl_outw(0, BCR_ILCRC);
ctrl_outw(0, BCR_ILCRD);
ctrl_outw(0, BCR_ILCRE);
ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG);
__raw_writew(0, BCR_ILCRA);
__raw_writew(0, BCR_ILCRB);
__raw_writew(0, BCR_ILCRC);
__raw_writew(0, BCR_ILCRD);
__raw_writew(0, BCR_ILCRE);
__raw_writew(0, BCR_ILCRF);
__raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}

View file

@ -17,8 +17,8 @@
static void __init init_shmin_irq(void)
{
ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
__raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
__raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
plat_irq_setup_pins(IRQ_MODE_IRQ);
}

View file

@ -159,21 +159,21 @@ static void ap320_wvga_power_on(void *board_data)
msleep(100);
/* ASD AP-320/325 LCD ON */
ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
/* backlight */
gpio_set_value(GPIO_PTS3, 0);
ctrl_outw(0x100, FPGA_BKLREG);
__raw_writew(0x100, FPGA_BKLREG);
}
static void ap320_wvga_power_off(void *board_data)
{
/* backlight */
ctrl_outw(0, FPGA_BKLREG);
__raw_writew(0, FPGA_BKLREG);
gpio_set_value(GPIO_PTS3, 1);
/* ASD AP-320/325 LCD OFF */
ctrl_outw(0, FPGA_LCDREG);
__raw_writew(0, FPGA_LCDREG);
}
static struct sh_mobile_lcdc_info lcdc_info = {
@ -595,7 +595,7 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_PTZ4, NULL);
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
__raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
/* FLCTL */
gpio_request(GPIO_FN_FCE, NULL);
@ -613,9 +613,9 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_FN_FWE, NULL);
gpio_request(GPIO_FN_FRB, NULL);
ctrl_outw(0, PORT_HIZCRC);
ctrl_outw(0xFFFF, PORT_DRVCRA);
ctrl_outw(0xFFFF, PORT_DRVCRB);
__raw_writew(0, PORT_HIZCRC);
__raw_writew(0xFFFF, PORT_DRVCRA);
__raw_writew(0xFFFF, PORT_DRVCRB);
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);

View file

@ -66,9 +66,9 @@ static void enable_cayman_irq(unsigned int irq)
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
mask = ctrl_inl(reg);
mask = __raw_readl(reg);
mask |= bit;
ctrl_outl(mask, reg);
__raw_writel(mask, reg);
local_irq_restore(flags);
}
@ -83,9 +83,9 @@ void disable_cayman_irq(unsigned int irq)
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
mask = ctrl_inl(reg);
mask = __raw_readl(reg);
mask &= ~bit;
ctrl_outl(mask, reg);
__raw_writel(mask, reg);
local_irq_restore(flags);
}
@ -109,8 +109,8 @@ int cayman_irq_demux(int evt)
unsigned long status;
int i;
status = ctrl_inl(EPLD_STATUS_BASE) &
ctrl_inl(EPLD_MASK_BASE) & 0xff;
status = __raw_readl(EPLD_STATUS_BASE) &
__raw_readl(EPLD_MASK_BASE) & 0xff;
if (status == 0) {
irq = -1;
} else {
@ -126,8 +126,8 @@ int cayman_irq_demux(int evt)
unsigned long status;
int i;
status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
__raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
if (status == 0) {
irq = -1;
} else {

View file

@ -35,11 +35,11 @@ static void aica_rtc_gettimeofday(struct timespec *ts)
unsigned long val1, val2;
do {
val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
ts->tv_sec = val1 - TWENTY_YEARS;
@ -60,14 +60,14 @@ static int aica_rtc_settimeofday(const time_t secs)
unsigned long adj = secs + TWENTY_YEARS;
do {
ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
__raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
__raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
return 0;

View file

@ -696,13 +696,13 @@ static struct platform_device camera_devices[] = {
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
u32 status = ctrl_inl(clk->enable_reg);
u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
ctrl_outl(status, clk->enable_reg);
__raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@ -853,7 +853,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTG1, 0);
gpio_direction_output(GPIO_PTG2, 0);
gpio_direction_output(GPIO_PTG3, 0);
ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
__raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
/* enable SH-Eth */
gpio_request(GPIO_PTA1, NULL);
@ -873,16 +873,16 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_LNKSTA, NULL);
/* enable USB */
ctrl_outw(0x0000, 0xA4D80000);
ctrl_outw(0x0000, 0xA4D90000);
__raw_writew(0x0000, 0xA4D80000);
__raw_writew(0x0000, 0xA4D90000);
gpio_request(GPIO_PTB3, NULL);
gpio_request(GPIO_PTB4, NULL);
gpio_request(GPIO_PTB5, NULL);
gpio_direction_input(GPIO_PTB3);
gpio_direction_output(GPIO_PTB4, 0);
gpio_direction_output(GPIO_PTB5, 0);
ctrl_outw(0x0600, 0xa40501d4);
ctrl_outw(0x0600, 0xa4050192);
__raw_writew(0x0600, 0xa40501d4);
__raw_writew(0x0600, 0xa4050192);
if (gpio_get_value(GPIO_PTB3)) {
printk(KERN_INFO "USB1 function is selected\n");
@ -923,7 +923,7 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
gpio_request(GPIO_PTE6, NULL);
gpio_request(GPIO_PTU1, NULL);
@ -935,7 +935,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTA2, 0);
/* I/O buffer drive ability is high */
ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
__raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
@ -1067,7 +1067,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTB7, 0);
/* I/O buffer drive ability is high for SDHI1 */
ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);

View file

@ -64,7 +64,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
unsigned char * __init highlander_plat_irq_setup(void)
{
if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
printk(KERN_INFO "Using r7780mp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;

View file

@ -57,7 +57,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
unsigned char * __init highlander_plat_irq_setup(void)
{
if (ctrl_inw(0xa5000600)) {
if (__raw_readw(0xa5000600)) {
printk(KERN_INFO "Using r7780rp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;

View file

@ -66,20 +66,20 @@ static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
unsigned char * __init highlander_plat_irq_setup(void)
{
if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
return NULL;
printk(KERN_INFO "Using r7785rp interrupt controller.\n");
ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
__raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
/* Setup the FPGA IRL */
ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */
ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */
ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */
ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */
ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */
__raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */
__raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */
__raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */
__raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */
__raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */
__raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */
register_intc_controller(&intc_desc);
return irl2irq;

View file

@ -24,7 +24,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
unsigned int l, mask;
int ret = 0;
l = ctrl_inw(PA_DBSW);
l = __raw_readw(PA_DBSW);
/* Nothing to do if there's no state change */
if (psw->state) {
@ -45,7 +45,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
out:
/* Clear the switch IRQs */
l |= (0x7 << 12);
ctrl_outw(l, PA_DBSW);
__raw_writew(l, PA_DBSW);
return IRQ_RETVAL(ret);
}

View file

@ -311,13 +311,13 @@ device_initcall(r7780rp_devices_setup);
*/
static int ivdr_clk_enable(struct clk *clk)
{
ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
__raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
return 0;
}
static void ivdr_clk_disable(struct clk *clk)
{
ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
}
static struct clk_ops ivdr_clk_ops = {
@ -337,7 +337,7 @@ static struct clk *r7780rp_clocks[] = {
static void r7780rp_power_off(void)
{
if (mach_is_r7780mp() || mach_is_r7785rp())
ctrl_outw(0x0001, PA_POFF);
__raw_writew(0x0001, PA_POFF);
}
/*
@ -345,7 +345,7 @@ static void r7780rp_power_off(void)
*/
static void __init highlander_setup(char **cmdline_p)
{
u16 ver = ctrl_inw(PA_VERREG);
u16 ver = __raw_readw(PA_VERREG);
int i;
printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
@ -370,12 +370,12 @@ static void __init highlander_setup(char **cmdline_p)
clk_enable(clk);
}
ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
__raw_writew(0x0000, PA_OBLED); /* Clear LED. */
if (mach_is_r7780rp())
ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
__raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
__raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
pm_power_off = r7780rp_power_off;
}

View file

@ -53,7 +53,7 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info)
info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
APM_AC_ONLINE : APM_AC_OFFLINE;
pgdr = ctrl_inb(PGDR);
pgdr = __raw_readb(PGDR);
if (pgdr & PGDR_MAIN_BATTERY_OUT) {
info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
info->battery_flag = 0x80;

View file

@ -53,17 +53,17 @@ static void pm_enter(void)
sh_wdt_write_cnt(0);
/* disable PLL1 */
frqcr = ctrl_inw(FRQCR);
frqcr = __raw_readw(FRQCR);
frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
ctrl_outw(frqcr, FRQCR);
__raw_writew(frqcr, FRQCR);
/* enable standby */
stbcr = ctrl_inb(STBCR);
ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
stbcr = __raw_readb(STBCR);
__raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
/* set self-refresh */
mcr = ctrl_inw(MCR);
ctrl_outw(mcr & ~MCR_RFSH, MCR);
mcr = __raw_readw(MCR);
__raw_writew(mcr & ~MCR_RFSH, MCR);
/* set interrupt handler */
asm volatile("stc vbr, %0" : "=r" (vbr_old));
@ -73,8 +73,8 @@ static void pm_enter(void)
&wakeup_start, &wakeup_end - &wakeup_start);
asm volatile("ldc %0, vbr" : : "r" (vbr_new));
ctrl_outw(0, RTCNT);
ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
__raw_writew(0, RTCNT);
__raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
cpu_sleep();
@ -83,14 +83,14 @@ static void pm_enter(void)
free_page(vbr_new);
/* enable PLL1 */
frqcr = ctrl_inw(FRQCR);
frqcr = __raw_readw(FRQCR);
frqcr |= FRQCR_PSTBY;
ctrl_outw(frqcr, FRQCR);
__raw_writew(frqcr, FRQCR);
udelay(50);
frqcr |= FRQCR_PLLEN;
ctrl_outw(frqcr, FRQCR);
__raw_writew(frqcr, FRQCR);
ctrl_outb(stbcr, STBCR);
__raw_writeb(stbcr, STBCR);
clear_bl_bit();
}
@ -115,21 +115,21 @@ static int hp6x0_pm_enter(suspend_state_t state)
outw(hd64461_stbcr, HD64461_STBCR);
#endif
ctrl_outb(0x1f, DACR);
__raw_writeb(0x1f, DACR);
stbcr = ctrl_inb(STBCR);
ctrl_outb(0x01, STBCR);
stbcr = __raw_readb(STBCR);
__raw_writeb(0x01, STBCR);
stbcr2 = ctrl_inb(STBCR2);
ctrl_outb(0x7f , STBCR2);
stbcr2 = __raw_readb(STBCR2);
__raw_writeb(0x7f , STBCR2);
outw(0xf07f, HD64461_SCPUCR);
pm_enter();
outw(0, HD64461_SCPUCR);
ctrl_outb(stbcr, STBCR);
ctrl_outb(stbcr2, STBCR2);
__raw_writeb(stbcr, STBCR);
__raw_writeb(stbcr2, STBCR2);
#ifdef CONFIG_HD64461_ENABLER
hd64461_stbcr = inw(HD64461_STBCR);

View file

@ -149,19 +149,19 @@ static void __init hp6xx_setup(char **cmdline_p)
sh_dac_output(0, DAC_SPEAKER_VOLUME);
sh_dac_disable(DAC_SPEAKER_VOLUME);
v8 = ctrl_inb(DACR);
v8 = __raw_readb(DACR);
v8 &= ~DACR_DAE;
ctrl_outb(v8,DACR);
__raw_writeb(v8,DACR);
v8 = ctrl_inb(SCPDR);
v8 = __raw_readb(SCPDR);
v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
v8 &= ~SCPDR_TS_SCAN_ENABLE;
ctrl_outb(v8, SCPDR);
__raw_writeb(v8, SCPDR);
v = ctrl_inw(SCPCR);
v = __raw_readw(SCPCR);
v &= ~SCPCR_TS_MASK;
v |= SCPCR_TS_ENABLE;
ctrl_outw(v, SCPCR);
__raw_writew(v, SCPCR);
}
device_initcall(hp6xx_devices_setup);

View file

@ -282,7 +282,7 @@ static int camera_power(struct device *dev, int mode)
* use 1.8 V for VccQ_VIO
* use 2.85V for VccQ_SR
*/
ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
/* reset clear */
ret = gpio_request(GPIO_PTB4, NULL);
@ -492,13 +492,13 @@ static int kfr2r09_usb0_gadget_setup(void)
if (kfr2r09_usb0_gadget_i2c_setup() != 0)
return -ENODEV; /* unable to configure using i2c */
ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
msleep(20); /* wait 20ms to let the clock settle */
clk_enable(clk_get(NULL, "usb0"));
ctrl_outw(0x0600, 0xa40501d4);
__raw_writew(0x0600, 0xa40501d4);
return 0;
}
@ -526,12 +526,12 @@ static int __init kfr2r09_devices_setup(void)
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
ctrl_outl(0x36db0400, BSC_CS0BCR);
ctrl_outl(0x00000500, BSC_CS0WCR);
__raw_writel(0x36db0400, BSC_CS0BCR);
__raw_writel(0x00000500, BSC_CS0WCR);
/* setup NAND flash at CS4 */
ctrl_outl(0x36db0400, BSC_CS4BCR);
ctrl_outl(0x00000500, BSC_CS4WCR);
__raw_writel(0x36db0400, BSC_CS4BCR);
__raw_writel(0x00000500, BSC_CS4WCR);
/* setup KEYSC pins */
gpio_request(GPIO_FN_KEYOUT0, NULL);

View file

@ -76,39 +76,39 @@ static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
break;
case GIODRV_IOCSGIODATA1: /* write byte */
ctrl_outb((unsigned char)(0x0ff & data), addr);
__raw_writeb((unsigned char)(0x0ff & data), addr);
break;
case GIODRV_IOCSGIODATA2: /* write word */
if (addr & 0x01) {
return -EFAULT;
}
ctrl_outw((unsigned short int)(0x0ffff & data), addr);
__raw_writew((unsigned short int)(0x0ffff & data), addr);
break;
case GIODRV_IOCSGIODATA4: /* write long */
if (addr & 0x03) {
return -EFAULT;
}
ctrl_outl(data, addr);
__raw_writel(data, addr);
break;
case GIODRV_IOCGGIODATA1: /* read byte */
data = ctrl_inb(addr);
data = __raw_readb(addr);
break;
case GIODRV_IOCGGIODATA2: /* read word */
if (addr & 0x01) {
return -EFAULT;
}
data = ctrl_inw(addr);
data = __raw_readw(addr);
break;
case GIODRV_IOCGGIODATA4: /* read long */
if (addr & 0x03) {
return -EFAULT;
}
data = ctrl_inl(addr);
data = __raw_readl(addr);
break;
default:
return -EFAULT;

View file

@ -22,14 +22,14 @@ static void disable_landisk_irq(unsigned int irq)
{
unsigned char mask = 0xff ^ (0x01 << (irq - 5));
ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
__raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK);
}
static void enable_landisk_irq(unsigned int irq)
{
unsigned char value = (0x01 << (irq - 5));
ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
__raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK);
}
static struct irq_chip landisk_irq_chip __read_mostly = {
@ -52,5 +52,5 @@ void __init init_landisk_IRQ(void)
handle_level_irq, "level");
enable_landisk_irq(i);
}
ctrl_outb(0x00, PA_PWRINT_CLR);
__raw_writeb(0x00, PA_PWRINT_CLR);
}

View file

@ -25,7 +25,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
unsigned int sw_value;
int ret = 0;
sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
/* Nothing to do if there's no state change */
if (psw->state) {
@ -42,7 +42,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
out:
/* Clear the switch IRQs */
ctrl_outb(0x00, PA_PWRINT_CLR);
__raw_writeb(0x00, PA_PWRINT_CLR);
return IRQ_RETVAL(ret);
}

View file

@ -25,7 +25,7 @@ void init_landisk_IRQ(void);
static void landisk_power_off(void)
{
ctrl_outb(0x01, PA_SHUTDOWN);
__raw_writeb(0x01, PA_SHUTDOWN);
}
static struct resource cf_ide_resources[3];
@ -88,7 +88,7 @@ __initcall(landisk_devices_setup);
static void __init landisk_setup(char **cmdline_p)
{
/* LED ON */
ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
pm_power_off = landisk_power_off;

View file

@ -141,10 +141,10 @@ static inline void delay(void)
#if defined(CONFIG_PCI)
/* System board present, just make a dummy SRAM access. (CS0 will be
mapped to PCI memory, probably good to avoid it.) */
ctrl_inw(0xa6800000);
__raw_readw(0xa6800000);
#else
/* CS0 will be mapped to flash, ROM etc so safe to access it. */
ctrl_inw(0xa0000000);
__raw_readw(0xa0000000);
#endif
}

View file

@ -88,7 +88,7 @@ static void disable_microdev_irq(unsigned int irq)
fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
/* disable interrupts on the FPGA INTC register */
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
}
static void enable_microdev_irq(unsigned int irq)
@ -107,13 +107,13 @@ static void enable_microdev_irq(unsigned int irq)
priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
/* set priority for the interrupt */
priorities = ctrl_inl(priorityReg);
priorities = __raw_readl(priorityReg);
priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
ctrl_outl(priorities, priorityReg);
__raw_writel(priorities, priorityReg);
/* enable interrupts on the FPGA INTC register */
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
}
/* This function sets the desired irq handler to be a MicroDev type */
@ -134,7 +134,7 @@ extern void __init init_microdev_irq(void)
int i;
/* disable interrupts on the FPGA INTC register */
ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
__raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
make_microdev_irq(i);

View file

@ -516,8 +516,8 @@ static int __init migor_devices_setup(void)
/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
gpio_request(GPIO_FN_IRQ0, NULL);
ctrl_outl(0x00003400, BSC_CS4BCR);
ctrl_outl(0x00110080, BSC_CS4WCR);
__raw_writel(0x00003400, BSC_CS4BCR);
__raw_writel(0x00110080, BSC_CS4WCR);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
@ -533,7 +533,7 @@ static int __init migor_devices_setup(void)
/* NAND Flash */
gpio_request(GPIO_FN_CS6A_CE2B, NULL);
ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
__raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
gpio_request(GPIO_PTA1, NULL);
gpio_direction_input(GPIO_PTA1);
@ -627,7 +627,7 @@ static int __init migor_devices_setup(void)
#else
gpio_direction_output(GPIO_PTT0, 1);
#endif
ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);

View file

@ -129,7 +129,7 @@ void __init init_rts7751r2d_IRQ(void)
{
struct intc_desc *d;
switch (ctrl_inw(PA_VERREG) & 0xf0) {
switch (__raw_readw(PA_VERREG) & 0xf0) {
#ifdef CONFIG_RTS7751R2D_PLUS
case 0x10:
printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
@ -147,7 +147,7 @@ void __init init_rts7751r2d_IRQ(void)
#endif
default:
printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
ctrl_inw(PA_VERREG));
__raw_readw(PA_VERREG));
return;
}

View file

@ -70,7 +70,7 @@ static struct spi_board_info spi_bus[] = {
static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
{
BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */
ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE);
__raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
}
static struct sh_spi_info spi_info = {
@ -262,7 +262,7 @@ __initcall(rts7751r2d_devices_setup);
static void rts7751r2d_power_off(void)
{
ctrl_outw(0x0001, PA_POWOFF);
__raw_writew(0x0001, PA_POWOFF);
}
/*
@ -271,14 +271,14 @@ static void rts7751r2d_power_off(void)
static void __init rts7751r2d_setup(char **cmdline_p)
{
void __iomem *sm501_reg;
u16 ver = ctrl_inw(PA_VERREG);
u16 ver = __raw_readw(PA_VERREG);
printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
(ver >> 4) & 0xf, ver & 0xf);
ctrl_outw(0x0000, PA_OUTPORT);
__raw_writew(0x0000, PA_OUTPORT);
pm_power_off = rts7751r2d_power_off;
/* sm501 dram configuration:

View file

@ -96,7 +96,7 @@ static int __init rsk7203_devices_setup(void)
gpio_request(GPIO_FN_RXD0, NULL);
/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
__raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
gpio_request(GPIO_FN_IRQ0_PB, NULL);
return platform_add_devices(rsk7203_devices,

View file

@ -37,9 +37,9 @@ void __init init_sdk7780_IRQ(void)
{
printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
ctrl_outw(0xFFFF, FPGA_IRQ0MR);
__raw_writew(0xFFFF, FPGA_IRQ0MR);
/* Setup IRL 0-3 */
ctrl_outw(0x0003, FPGA_IMSR);
__raw_writew(0x0003, FPGA_IMSR);
plat_irq_setup_pins(IRQ_MODE_IRL3210);
register_intc_controller(&fpga_intc_desc);

View file

@ -74,8 +74,8 @@ device_initcall(sdk7780_devices_setup);
static void __init sdk7780_setup(char **cmdline_p)
{
u16 ver = ctrl_inw(FPGA_FPVERR);
u16 dateStamp = ctrl_inw(FPGA_FPDATER);
u16 ver = __raw_readw(FPGA_FPVERR);
u16 dateStamp = __raw_readw(FPGA_FPDATER);
printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
printk(KERN_INFO "Board version: %d (revision %d), "
@ -85,7 +85,7 @@ static void __init sdk7780_setup(char **cmdline_p)
dateStamp);
/* Setup pin mux'ing for PCIC */
ctrl_outw(0x0000, GPIO_PECR);
__raw_writew(0x0000, GPIO_PECR);
}
/*

View file

@ -16,7 +16,7 @@
static inline void delay(void)
{
ctrl_inw(0x20000000); /* P2 ROM Area */
__raw_readw(0x20000000); /* P2 ROM Area */
}
/* MS7750 requires special versions of in*, out* routines, since

View file

@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq)
unsigned short msk0,msk1;
/* Set the priority in IPR to 0 */
val = ctrl_inw(INTC_IPR01);
val = __raw_readw(INTC_IPR01);
val &= mask;
ctrl_outw(val, INTC_IPR01);
__raw_writew(val, INTC_IPR01);
/* FPGA mask set */
msk0 = ctrl_inw(INTMSK0);
msk1 = ctrl_inw(INTMSK1);
msk0 = __raw_readw(INTMSK0);
msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq)
msk1 |= 0x00ff;
break;
}
ctrl_outw(msk0, INTMSK0);
ctrl_outw(msk1, INTMSK1);
__raw_writew(msk0, INTMSK0);
__raw_writew(msk1, INTMSK1);
}
static void enable_se7206_irq(unsigned int irq)
@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq)
unsigned short msk0,msk1;
/* Set priority in IPR back to original value */
val = ctrl_inw(INTC_IPR01);
val = __raw_readw(INTC_IPR01);
val |= value;
ctrl_outw(val, INTC_IPR01);
__raw_writew(val, INTC_IPR01);
/* FPGA mask reset */
msk0 = ctrl_inw(INTMSK0);
msk1 = ctrl_inw(INTMSK1);
msk0 = __raw_readw(INTMSK0);
msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@ -82,8 +82,8 @@ static void enable_se7206_irq(unsigned int irq)
msk1 &= ~0x00ff;
break;
}
ctrl_outw(msk0, INTMSK0);
ctrl_outw(msk1, INTMSK1);
__raw_writew(msk0, INTMSK0);
__raw_writew(msk1, INTMSK1);
}
static void eoi_se7206_irq(unsigned int irq)
@ -93,8 +93,8 @@ static void eoi_se7206_irq(unsigned int irq)
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_se7206_irq(irq);
/* FPGA isr clear */
sts0 = ctrl_inw(INTSTS0);
sts1 = ctrl_inw(INTSTS1);
sts0 = __raw_readw(INTSTS0);
sts1 = __raw_readw(INTSTS1);
switch (irq) {
case IRQ0_IRQ:
@ -108,8 +108,8 @@ static void eoi_se7206_irq(unsigned int irq)
sts1 &= ~0x00ff;
break;
}
ctrl_outw(sts0, INTSTS0);
ctrl_outw(sts1, INTSTS1);
__raw_writew(sts0, INTSTS0);
__raw_writew(sts1, INTSTS1);
}
static struct irq_chip se7206_irq_chip __read_mostly = {
@ -136,11 +136,11 @@ void __init init_se7206_IRQ(void)
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
__raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
/* FPGA System register setup*/
ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
ctrl_outw(0x0001,INTSEL);
__raw_writew(0x0001,INTSEL);
}

View file

@ -21,13 +21,13 @@ unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
static void disable_se7343_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
__raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
}
static void enable_se7343_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
__raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
}
static struct irq_chip se7343_irq_chip __read_mostly = {
@ -39,7 +39,7 @@ static struct irq_chip se7343_irq_chip __read_mostly = {
static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
unsigned short intv = ctrl_inw(PA_CPLD_ST);
unsigned short intv = __raw_readw(PA_CPLD_ST);
unsigned int ext_irq = 0;
intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
@ -59,8 +59,8 @@ void __init init_7343se_IRQ(void)
{
int i, irq;
ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */
ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
__raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
__raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
irq = create_irq();

View file

@ -161,10 +161,10 @@ device_initcall(sh7343se_devices_setup);
*/
static void __init sh7343se_setup(char **cmdline_p)
{
ctrl_outw(0xf900, FPGA_OUT); /* FPGA */
__raw_writew(0xf900, FPGA_OUT); /* FPGA */
ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
ctrl_outw(0x0020, PORT_PSELD);
__raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
__raw_writew(0x0020, PORT_PSELD);
printk(KERN_INFO "MS7343CP01 Setup...done\n");
}

View file

@ -96,13 +96,13 @@ static struct ipr_desc ipr_irq_desc = {
void __init init_se_IRQ(void)
{
/* Disable all interrupts */
ctrl_outw(0, BCR_ILCRA);
ctrl_outw(0, BCR_ILCRB);
ctrl_outw(0, BCR_ILCRC);
ctrl_outw(0, BCR_ILCRD);
ctrl_outw(0, BCR_ILCRE);
ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG);
__raw_writew(0, BCR_ILCRA);
__raw_writew(0, BCR_ILCRB);
__raw_writew(0, BCR_ILCRC);
__raw_writew(0, BCR_ILCRD);
__raw_writew(0, BCR_ILCRE);
__raw_writew(0, BCR_ILCRF);
__raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}

View file

@ -38,7 +38,7 @@ static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
void __init init_se7721_IRQ(void)
{
/* PPCR */
ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
__raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
register_intc_controller(&intc_desc);
intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);

View file

@ -80,10 +80,10 @@ device_initcall(se7721_devices_setup);
static void __init se7721_setup(char **cmdline_p)
{
/* for USB */
ctrl_outw(0x0000, 0xA405010C); /* PGCR */
ctrl_outw(0x0000, 0xA405010E); /* PHCR */
ctrl_outw(0x00AA, 0xA4050118); /* PPCR */
ctrl_outw(0x0000, 0xA4050124); /* PSELA */
__raw_writew(0x0000, 0xA405010C); /* PGCR */
__raw_writew(0x0000, 0xA405010E); /* PHCR */
__raw_writew(0x00AA, 0xA4050118); /* PPCR */
__raw_writew(0x0000, 0xA4050124); /* PSELA */
}
/*

View file

@ -21,13 +21,13 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
static void disable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
__raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
}
static void enable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
__raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
}
static struct irq_chip se7722_irq_chip __read_mostly = {
@ -39,7 +39,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
unsigned short intv = ctrl_inw(IRQ01_STS);
unsigned short intv = __raw_readw(IRQ01_STS);
unsigned int ext_irq = 0;
intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
@ -59,8 +59,8 @@ void __init init_se7722_IRQ(void)
{
int i, irq;
ctrl_outw(0, IRQ01_MASK); /* disable all irqs */
ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
__raw_writew(0, IRQ01_MASK); /* disable all irqs */
__raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
irq = create_irq();

View file

@ -156,32 +156,32 @@ device_initcall(se7722_devices_setup);
static void __init se7722_setup(char **cmdline_p)
{
ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
__raw_writew(0x010D, FPGA_OUT); /* FPGA */
ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
__raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
__raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
/* LCDC I/O */
ctrl_outw(0x0020, PORT_PSELD);
__raw_writew(0x0020, PORT_PSELD);
/* SIOF1*/
ctrl_outw(0x0003, PORT_PSELB);
ctrl_outw(0xe000, PORT_PSELC);
ctrl_outw(0x0000, PORT_PKCR);
__raw_writew(0x0003, PORT_PSELB);
__raw_writew(0xe000, PORT_PSELC);
__raw_writew(0x0000, PORT_PKCR);
/* LCDC */
ctrl_outw(0x4020, PORT_PHCR);
ctrl_outw(0x0000, PORT_PLCR);
ctrl_outw(0x0000, PORT_PMCR);
ctrl_outw(0x0002, PORT_PRCR);
ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */
__raw_writew(0x4020, PORT_PHCR);
__raw_writew(0x0000, PORT_PLCR);
__raw_writew(0x0000, PORT_PMCR);
__raw_writew(0x0002, PORT_PRCR);
__raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
/* KEYSC */
ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
ctrl_outw(0x0000, PORT_PYCR);
ctrl_outw(0x0000, PORT_PZCR);
ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
__raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
__raw_writew(0x0000, PORT_PYCR);
__raw_writew(0x0000, PORT_PZCR);
__raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
__raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
}
/*

View file

@ -72,14 +72,14 @@ static void disable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
__raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
}
static void enable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
__raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
}
static struct irq_chip se7724_irq_chip __read_mostly = {
@ -92,7 +92,7 @@ static struct irq_chip se7724_irq_chip __read_mostly = {
static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct fpga_irq set = get_fpga_irq(irq);
unsigned short intv = ctrl_inw(set.sraddr);
unsigned short intv = __raw_readw(set.sraddr);
struct irq_desc *ext_desc;
unsigned int ext_irq = set.base;
@ -115,13 +115,13 @@ void __init init_se7724_IRQ(void)
{
int i;
ctrl_outw(0xffff, IRQ0_MR); /* mask all */
ctrl_outw(0xffff, IRQ1_MR); /* mask all */
ctrl_outw(0xffff, IRQ2_MR); /* mask all */
ctrl_outw(0x0000, IRQ0_SR); /* clear irq */
ctrl_outw(0x0000, IRQ1_SR); /* clear irq */
ctrl_outw(0x0000, IRQ2_SR); /* clear irq */
ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
__raw_writew(0xffff, IRQ0_MR); /* mask all */
__raw_writew(0xffff, IRQ1_MR); /* mask all */
__raw_writew(0xffff, IRQ2_MR); /* mask all */
__raw_writew(0x0000, IRQ0_SR); /* clear irq */
__raw_writew(0x0000, IRQ1_SR); /* clear irq */
__raw_writew(0x0000, IRQ2_SR); /* clear irq */
__raw_writew(0x002a, IRQ_MODE); /* set irq type */
for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,

View file

@ -256,12 +256,12 @@ static struct platform_device ceu1_device = {
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
u32 status = ctrl_inl(clk->enable_reg);
u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
ctrl_outl(status, clk->enable_reg);
__raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void)
int t = 10000;
while (t--) {
if (!ctrl_inw(EEPROM_STAT))
if (!__raw_readw(EEPROM_STAT))
return 1;
cpu_relax();
}
@ -542,13 +542,13 @@ static void __init sh_eth_init(void)
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
ctrl_outw(0x0, EEPROM_OP); /* read */
ctrl_outw(i*2, EEPROM_ADR);
ctrl_outw(0x1, EEPROM_STRT);
__raw_writew(0x0, EEPROM_OP); /* read */
__raw_writew(i*2, EEPROM_ADR);
__raw_writew(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
mac = ctrl_inw(EEPROM_DATA);
mac = __raw_readw(EEPROM_DATA);
sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
@ -585,7 +585,7 @@ arch_initcall(arch_setup);
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
u16 sw = __raw_readw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
/* register board specific self-refresh code */
@ -595,7 +595,7 @@ static int __init devices_setup(void)
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
__raw_writew(__raw_readw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 7) | /* AK4643 */
@ -604,7 +604,7 @@ static int __init devices_setup(void)
FPGA_OUT);
/* turn on USB clocks, use external clock */
ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
#ifdef CONFIG_PM
/* Let LED9 show STATUS2 */
@ -633,10 +633,10 @@ static int __init devices_setup(void)
#endif
/* enable USB0 port */
ctrl_outw(0x0600, 0xa40501d4);
__raw_writew(0x0600, 0xa40501d4);
/* enable USB1 port */
ctrl_outw(0x0600, 0xa4050192);
__raw_writew(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@ -684,7 +684,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);

View file

@ -24,30 +24,30 @@
void __init init_se7780_IRQ(void)
{
/* enable all interrupt at FPGA */
ctrl_outw(0, FPGA_INTMSK1);
__raw_writew(0, FPGA_INTMSK1);
/* mask SM501 interrupt */
ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
__raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
/* enable all interrupt at FPGA */
ctrl_outw(0, FPGA_INTMSK2);
__raw_writew(0, FPGA_INTMSK2);
/* set FPGA INTSEL register */
/* FPGA + 0x06 */
ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
__raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
/* FPGA + 0x08 */
ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
__raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
/* FPGA + 0x0A */
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
__raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
/* ICR1: detect low level(for 2ndcut) */
ctrl_outl(0xAAAA0000, INTC_ICR1);
__raw_writel(0xAAAA0000, INTC_ICR1);
/*
* FPGA PCISEL register initialize
@ -63,6 +63,6 @@ void __init init_se7780_IRQ(void)
* INTD || INTD | INTC | -- | INTA
* -------------------------------------
*/
ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
__raw_writew(0x0013, FPGA_PCI_INTSEL1);
__raw_writew(0xE402, FPGA_PCI_INTSEL2);
}

View file

@ -75,14 +75,14 @@ device_initcall(se7780_devices_setup);
static void __init se7780_setup(char **cmdline_p)
{
/* "SH-Linux" on LED Display */
ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
__raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
__raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
__raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
__raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
__raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
__raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
__raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
__raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
@ -93,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p)
* REQ2/GNT2 -> Serial ATA
* REQ3/GNT3 -> PCI slot
*/
ctrl_outw(0x0213, FPGA_REQSEL);
__raw_writew(0x0213, FPGA_REQSEL);
/* GPIO setting */
ctrl_outw(0x0000, GPIO_PECR);
ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
ctrl_outw(0x0c00, GPIO_PMSELR);
__raw_writew(0x0000, GPIO_PECR);
__raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
__raw_writew(0x0c00, GPIO_PMSELR);
/* iVDR Power ON */
ctrl_outw(0x0001, FPGA_IVDRPW);
__raw_writew(0x0001, FPGA_IVDRPW);
}
/*

View file

@ -44,15 +44,15 @@ unsigned long get_cmos_time(void)
spin_lock(&sh03_rtc_lock);
again:
do {
sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10;
day = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10;
mon = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10;
year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10
+ (ctrl_inb(RTC_YEA100 ) & 0xf) * 100
+ (ctrl_inb(RTC_YEA1000) & 0xf) * 1000;
} while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10);
sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
+ (__raw_readb(RTC_YEA100 ) & 0xf) * 100
+ (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
} while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
hour > 23 || min > 59 || sec > 59) {
printk(KERN_ERR
@ -60,16 +60,16 @@ unsigned long get_cmos_time(void)
printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
year, mon, day, hour, min, sec);
ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10);
ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10);
ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10);
ctrl_outb(6, RTC_WEE1);
ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10);
ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10);
ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10);
ctrl_outb(0, RTC_YEA100);
ctrl_outb(2, RTC_YEA1000);
ctrl_outb(0, RTC_CTL);
__raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
__raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
__raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
__raw_writeb(6, RTC_WEE1);
__raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
__raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
__raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
__raw_writeb(0, RTC_YEA100);
__raw_writeb(2, RTC_YEA1000);
__raw_writeb(0, RTC_CTL);
goto again;
}
@ -93,9 +93,9 @@ static int set_rtc_mmss(unsigned long nowtime)
/* gets recalled with irq locally disabled */
spin_lock(&sh03_rtc_lock);
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
break;
cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
@ -103,10 +103,10 @@ static int set_rtc_mmss(unsigned long nowtime)
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
ctrl_outb(real_seconds % 10, RTC_SEC1);
ctrl_outb(real_seconds / 10, RTC_SEC10);
ctrl_outb(real_minutes % 10, RTC_MIN1);
ctrl_outb(real_minutes / 10, RTC_MIN10);
__raw_writeb(real_seconds % 10, RTC_SEC1);
__raw_writeb(real_seconds / 10, RTC_SEC10);
__raw_writeb(real_minutes % 10, RTC_MIN1);
__raw_writeb(real_minutes / 10, RTC_MIN10);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",

View file

@ -28,18 +28,18 @@
void __init init_sh7763rdp_IRQ(void)
{
/* GPIO enabled */
ctrl_outl(1 << 25, INTC_INT2MSKCR);
__raw_writel(1 << 25, INTC_INT2MSKCR);
/* enable GPIO interrupts */
ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
__raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
INTC_INT2PRI7);
/* USBH enabled */
ctrl_outl(1 << 17, INTC_INT2MSKCR1);
__raw_writel(1 << 17, INTC_INT2MSKCR1);
/* GETHER enabled */
ctrl_outl(1 << 16, INTC_INT2MSKCR1);
__raw_writel(1 << 16, INTC_INT2MSKCR1);
/* DMAC enabled */
ctrl_outl(1 << 8, INTC_INT2MSKCR);
__raw_writel(1 << 8, INTC_INT2MSKCR);
}

View file

@ -158,50 +158,50 @@ device_initcall(sh7763rdp_devices_setup);
static void __init sh7763rdp_setup(char **cmdline_p)
{
/* Board version check */
if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
printk(KERN_INFO "RTE Standard Configuration\n");
else
printk(KERN_INFO "RTA Standard Configuration\n");
/* USB pin select bits (clear bit 5-2 to 0) */
ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
__raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
/* USBH setup port I controls to other (clear bits 4-9 to 0) */
ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
__raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
/* Select USB Host controller */
ctrl_outw(0x00, USB_USBHSC);
__raw_writew(0x00, USB_USBHSC);
/* For LCD */
/* set PTJ7-1, bits 15-2 of PJCR to 0 */
ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
__raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
/* set PTI5, bits 11-10 of PICR to 0 */
ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
ctrl_outw(0, PORT_PKCR);
ctrl_outw(0, PORT_PLCR);
__raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
__raw_writew(0, PORT_PKCR);
__raw_writew(0, PORT_PLCR);
/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
__raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
__raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
/* For HAC */
/* bit3-0 0100:HAC & SSI1 enable */
ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
__raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
/* bit14 1:SSI_HAC_CLK enable */
ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
__raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
/* SH-Ether */
ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
ctrl_outw(0x0, PORT_PFCR);
ctrl_outw(0x0, PORT_PFCR);
ctrl_outw(0x0, PORT_PFCR);
__raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
__raw_writew(0x0, PORT_PFCR);
__raw_writew(0x0, PORT_PFCR);
__raw_writew(0x0, PORT_PFCR);
/* MMC */
/*selects SCIF and MMC other functions */
ctrl_outw(0x0001, PORT_PSEL0);
__raw_writew(0x0001, PORT_PSEL0);
/* MMC clock operates */
ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
__raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
__raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
__raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
}
static struct sh_machine_vector mv_sh7763rdp __initmv = {

View file

@ -30,7 +30,7 @@
static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
{
(void)ctrl_inb(0xb8000000); /* dummy read */
(void)__raw_readb(0xb8000000); /* dummy read */
printk("SnapGear: erase switch interrupt!\n");

View file

@ -41,13 +41,13 @@ static void disable_systemh_irq(unsigned int irq)
unsigned long val, mask = 0x01 << 1;
/* Clear the "irq"th bit in the mask and set it in the request */
val = ctrl_inl((unsigned long)systemh_irq_mask_register);
val = __raw_readl((unsigned long)systemh_irq_mask_register);
val &= ~mask;
ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
__raw_writel(val, (unsigned long)systemh_irq_mask_register);
val = ctrl_inl((unsigned long)systemh_irq_request_register);
val = __raw_readl((unsigned long)systemh_irq_request_register);
val |= mask;
ctrl_outl(val, (unsigned long)systemh_irq_request_register);
__raw_writel(val, (unsigned long)systemh_irq_request_register);
}
}
@ -57,9 +57,9 @@ static void enable_systemh_irq(unsigned int irq)
unsigned long val, mask = 0x01 << 1;
/* Set "irq"th bit in the mask register */
val = ctrl_inl((unsigned long)systemh_irq_mask_register);
val = __raw_readl((unsigned long)systemh_irq_mask_register);
val |= mask;
ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
__raw_writel(val, (unsigned long)systemh_irq_mask_register);
}
}

View file

@ -16,8 +16,8 @@ static inline unsigned int port2adr(unsigned int port)
u8 titan_inb(unsigned long port)
{
if (PXSEG(port))
return ctrl_inb(port);
return ctrl_inw(port2adr(port)) & 0xff;
return __raw_readb(port);
return __raw_readw(port2adr(port)) & 0xff;
}
u8 titan_inb_p(unsigned long port)
@ -25,9 +25,9 @@ u8 titan_inb_p(unsigned long port)
u8 v;
if (PXSEG(port))
v = ctrl_inb(port);
v = __raw_readb(port);
else
v = ctrl_inw(port2adr(port)) & 0xff;
v = __raw_readw(port2adr(port)) & 0xff;
ctrl_delay();
return v;
}
@ -35,9 +35,9 @@ u8 titan_inb_p(unsigned long port)
u16 titan_inw(unsigned long port)
{
if (PXSEG(port))
return ctrl_inw(port);
return __raw_readw(port);
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
return __raw_readw(port2adr(port));
else
maybebadio(port);
return 0;
@ -46,9 +46,9 @@ u16 titan_inw(unsigned long port)
u32 titan_inl(unsigned long port)
{
if (PXSEG(port))
return ctrl_inl(port);
return __raw_readl(port);
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
return __raw_readw(port2adr(port));
else
maybebadio(port);
return 0;
@ -57,26 +57,26 @@ u32 titan_inl(unsigned long port)
void titan_outb(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
__raw_writeb(value, port);
else
ctrl_outw(value, port2adr(port));
__raw_writew(value, port2adr(port));
}
void titan_outb_p(u8 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outb(value, port);
__raw_writeb(value, port);
else
ctrl_outw(value, port2adr(port));
__raw_writew(value, port2adr(port));
ctrl_delay();
}
void titan_outw(u16 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outw(value, port);
__raw_writew(value, port);
else if (port >= 0x2000)
ctrl_outw(value, port2adr(port));
__raw_writew(value, port2adr(port));
else
maybebadio(port);
}
@ -84,7 +84,7 @@ void titan_outw(u16 value, unsigned long port)
void titan_outl(u32 value, unsigned long port)
{
if (PXSEG(port))
ctrl_outl(value, port);
__raw_writel(value, port);
else
maybebadio(port);
}

View file

@ -70,10 +70,10 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
__func__, bit, addr, shift, set);
tmp = ctrl_inw(addr);
tmp = __raw_readw(addr);
tmp &= ~(0xf << shift);
tmp |= set << shift;
ctrl_outw(tmp, addr);
__raw_writew(tmp, addr);
}
/**
@ -142,9 +142,9 @@ void ilsel_disable(unsigned int irq)
addr = mk_ilsel_addr(irq);
tmp = ctrl_inw(addr);
tmp = __raw_readw(addr);
tmp &= ~(0xf << mk_ilsel_shift(irq));
ctrl_outw(tmp, addr);
__raw_writew(tmp, addr);
clear_bit(irq, &ilsel_level_map);
}

View file

@ -149,7 +149,7 @@ static void __init x3proto_init_irq(void)
plat_irq_setup_pins(IRQ_MODE_IRL3210);
/* Set ICR0.LVLMODE */
ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
}
static struct sh_machine_vector mv_x3proto __initmv = {

View file

@ -55,7 +55,7 @@ static struct irq_chip hd64461_irq_chip = {
static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
{
unsigned short intv = ctrl_inw(HD64461_NIRR);
unsigned short intv = __raw_readw(HD64461_NIRR);
struct irq_desc *ext_desc;
unsigned int ext_irq = HD64461_IRQBASE;

View file

@ -40,10 +40,10 @@ static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
static int pvr2_request_dma(struct dma_channel *chan)
{
if (ctrl_inl(PVR2_DMA_MODE) != 0)
if (__raw_readl(PVR2_DMA_MODE) != 0)
return -EBUSY;
ctrl_outl(0, PVR2_DMA_LMMODE0);
__raw_writel(0, PVR2_DMA_LMMODE0);
return 0;
}
@ -60,9 +60,9 @@ static int pvr2_xfer_dma(struct dma_channel *chan)
xfer_complete = 0;
ctrl_outl(chan->dar, PVR2_DMA_ADDR);
ctrl_outl(chan->count, PVR2_DMA_COUNT);
ctrl_outl(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
__raw_writel(chan->dar, PVR2_DMA_ADDR);
__raw_writel(chan->count, PVR2_DMA_COUNT);
__raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
return 0;
}

View file

@ -54,7 +54,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
*/
static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
{
u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
u32 chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
}
@ -70,13 +70,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
struct dma_channel *chan = dev_id;
u32 chcr;
chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
if (!(chcr & CHCR_TE))
return IRQ_NONE;
chcr &= ~(CHCR_IE | CHCR_DE);
ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
wake_up(&chan->wait_queue);
@ -115,7 +115,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
chan->flags &= ~DMA_TEI_CAPABLE;
}
ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
chan->flags |= DMA_CONFIGURED;
return 0;
@ -126,13 +126,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
int irq;
u32 chcr;
chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
chcr |= CHCR_DE;
if (chan->flags & DMA_TEI_CAPABLE)
chcr |= CHCR_IE;
ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
if (chan->flags & DMA_TEI_CAPABLE) {
irq = get_dmte_irq(chan->chan);
@ -150,9 +150,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
disable_irq(irq);
}
chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
}
static int sh_dmac_xfer_dma(struct dma_channel *chan)
@ -183,12 +183,12 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
*/
if (chan->sar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
__raw_writel(chan->sar, (dma_base_addr[chan->chan]+SAR));
if (chan->dar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
__raw_writel(chan->dar, (dma_base_addr[chan->chan] + DAR));
ctrl_outl(chan->count >> calc_xmit_shift(chan),
__raw_writel(chan->count >> calc_xmit_shift(chan),
(dma_base_addr[chan->chan] + TCR));
sh_dmac_enable_dma(chan);
@ -198,10 +198,10 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
static int sh_dmac_get_dma_residue(struct dma_channel *chan)
{
if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
if (!(__raw_readl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
return 0;
return ctrl_inl(dma_base_addr[chan->chan] + TCR)
return __raw_readl(dma_base_addr[chan->chan] + TCR)
<< calc_xmit_shift(chan);
}

View file

@ -86,8 +86,8 @@ static irqreturn_t dmabrg_irq(int irq, void *data)
unsigned long dcr;
unsigned int i;
dcr = ctrl_inl(DMABRGCR);
ctrl_outl(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
dcr = __raw_readl(DMABRGCR);
__raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */
dcr &= dcr >> 8; /* ignore masked */
/* USB stuff, get it out of the way first */
@ -109,17 +109,17 @@ static irqreturn_t dmabrg_irq(int irq, void *data)
static void dmabrg_disable_irq(unsigned int dmairq)
{
unsigned long dcr;
dcr = ctrl_inl(DMABRGCR);
dcr = __raw_readl(DMABRGCR);
dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
ctrl_outl(dcr, DMABRGCR);
__raw_writel(dcr, DMABRGCR);
}
static void dmabrg_enable_irq(unsigned int dmairq)
{
unsigned long dcr;
dcr = ctrl_inl(DMABRGCR);
dcr = __raw_readl(DMABRGCR);
dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
ctrl_outl(dcr, DMABRGCR);
__raw_writel(dcr, DMABRGCR);
}
int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
@ -165,13 +165,13 @@ static int __init dmabrg_init(void)
printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
#endif
ctrl_outl(0, DMABRGCR);
ctrl_outl(0, DMACHCR0);
ctrl_outl(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
__raw_writel(0, DMABRGCR);
__raw_writel(0, DMACHCR0);
__raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */
/* enable DMABRG mode, enable the DMAC */
or = ctrl_inl(DMAOR);
ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
or = __raw_readl(DMAOR);
__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
"DMABRG USB address error", NULL);

View file

@ -43,7 +43,7 @@ int pci_fixup_pcic(struct pci_channel *chan)
{
unsigned long bcr1, mcr;
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 = __raw_readl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(chan, bcr1, SH4_PCIBCR1);
@ -54,7 +54,7 @@ int pci_fixup_pcic(struct pci_channel *chan)
pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
mcr = ctrl_inl(SH7751_MCR);
mcr = __raw_readl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(chan, mcr, SH4_PCIMCR);

View file

@ -167,13 +167,13 @@ struct sh4_pci_address_map {
static inline void pci_write_reg(struct pci_channel *chan,
unsigned long val, unsigned long reg)
{
ctrl_outl(val, chan->reg_base + reg);
__raw_writel(val, chan->reg_base + reg);
}
static inline unsigned long pci_read_reg(struct pci_channel *chan,
unsigned long reg)
{
return ctrl_inl(chan->reg_base + reg);
return __raw_readl(chan->reg_base + reg);
}
#endif /* __PCI_SH4_H */

View file

@ -86,14 +86,14 @@ extern unsigned long pcicr_virt;
/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
/* Write I/O functions */
#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
/* Read I/O functions */
#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg))
#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg))
#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg))
/* Set PCI config bits */
#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)

View file

@ -97,9 +97,9 @@ static int __init sh7751_pci_init(void)
return ret;
/* Set the BCR's to enable PCI access */
reg = ctrl_inl(SH7751_BCR1);
reg = __raw_readl(SH7751_BCR1);
reg |= 0x80000;
ctrl_outl(reg, SH7751_BCR1);
__raw_writel(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(chan, 0, SH4_PCICLKR);
@ -159,13 +159,13 @@ static int __init sh7751_pci_init(void)
return -1;
/* configure the wait control registers */
word = ctrl_inl(SH7751_WCR1);
word = __raw_readl(SH7751_WCR1);
pci_write_reg(chan, word, SH4_PCIWCR1);
word = ctrl_inl(SH7751_WCR2);
word = __raw_readl(SH7751_WCR2);
pci_write_reg(chan, word, SH4_PCIWCR2);
word = ctrl_inl(SH7751_WCR3);
word = __raw_readl(SH7751_WCR3);
pci_write_reg(chan, word, SH4_PCIWCR3);
word = ctrl_inl(SH7751_MCR);
word = __raw_readl(SH7751_MCR);
pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..

View file

@ -134,8 +134,8 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
*
* Do not trust the documentation, for it is evil.
*/
vcrh = ctrl_inl(base);
vcrl = ctrl_inl(base + sizeof(u32));
vcrh = __raw_readl(base);
vcrl = __raw_readl(base + sizeof(u32));
tmp = ((u64)vcrh << 32) | vcrl;
memcpy(vcr, &tmp, sizeof(u64));
@ -147,8 +147,8 @@ static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
{
u64 tmp = *(u64 *)&vcr;
ctrl_outl((tmp >> 32) & 0xffffffff, base);
ctrl_outl(tmp & 0xffffffff, base + sizeof(u32));
__raw_writel((tmp >> 32) & 0xffffffff, base);
__raw_writel(tmp & 0xffffffff, base + sizeof(u32));
return 0;
}

View file

@ -20,14 +20,14 @@
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define dmaor_read_reg(n) \
(n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \
: ctrl_inw(SH_DMAC_BASE0 + DMAOR))
(n ? __raw_readw(SH_DMAC_BASE1 + DMAOR) \
: __raw_readw(SH_DMAC_BASE0 + DMAOR))
#define dmaor_write_reg(n, data) \
(n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \
: ctrl_outw(data, SH_DMAC_BASE0 + DMAOR))
(n ? __raw_writew(data, SH_DMAC_BASE1 + DMAOR) \
: __raw_writew(data, SH_DMAC_BASE0 + DMAOR))
#else /* Other CPU */
#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR)
#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)
#define dmaor_read_reg(n) __raw_readw(SH_DMAC_BASE0 + DMAOR)
#define dmaor_write_reg(n, data) __raw_writew(data, SH_DMAC_BASE0 + DMAOR)
#endif
static int dmte_irq_map[] __maybe_unused = {

View file

@ -158,7 +158,7 @@ static inline void enable_mmu(void)
unsigned int cpu = smp_processor_id();
/* Enable MMU */
ctrl_outl(MMU_CONTROL_INIT, MMUCR);
__raw_writel(MMU_CONTROL_INIT, MMUCR);
ctrl_barrier();
if (asid_cache(cpu) == NO_CONTEXT)
@ -171,9 +171,9 @@ static inline void disable_mmu(void)
{
unsigned long cr;
cr = ctrl_inl(MMUCR);
cr = __raw_readl(MMUCR);
cr &= ~MMU_CONTROL_INIT;
ctrl_outl(cr, MMUCR);
__raw_writel(cr, MMUCR);
ctrl_barrier();
}

View file

@ -49,11 +49,11 @@ static inline unsigned long get_asid(void)
/* MMU_TTB is used for optimizing the fault handling. */
static inline void set_TTB(pgd_t *pgd)
{
ctrl_outl((unsigned long)pgd, MMU_TTB);
__raw_writel((unsigned long)pgd, MMU_TTB);
}
static inline pgd_t *get_TTB(void)
{
return (pgd_t *)ctrl_inl(MMU_TTB);
return (pgd_t *)__raw_readl(MMU_TTB);
}
#endif /* __ASM_SH_MMU_CONTEXT_32_H */

View file

@ -70,7 +70,7 @@
*/
static inline __u32 sh_wdt_read_cnt(void)
{
return ctrl_inl(WTCNT_R);
return __raw_readl(WTCNT_R);
}
/**
@ -82,7 +82,7 @@ static inline __u32 sh_wdt_read_cnt(void)
*/
static inline void sh_wdt_write_cnt(__u32 val)
{
ctrl_outl((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
__raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
}
/**
@ -94,7 +94,7 @@ static inline void sh_wdt_write_cnt(__u32 val)
*/
static inline void sh_wdt_write_bst(__u32 val)
{
ctrl_outl((WTBST_HIGH << 24) | (__u32)val, WTBST);
__raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
}
/**
* sh_wdt_read_csr - Read from Control/Status Register
@ -103,7 +103,7 @@ static inline void sh_wdt_write_bst(__u32 val)
*/
static inline __u32 sh_wdt_read_csr(void)
{
return ctrl_inl(WTCSR_R);
return __raw_readl(WTCSR_R);
}
/**
@ -115,7 +115,7 @@ static inline __u32 sh_wdt_read_csr(void)
*/
static inline void sh_wdt_write_csr(__u32 val)
{
ctrl_outl((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
__raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
}
#else
/**
@ -124,7 +124,7 @@ static inline void sh_wdt_write_csr(__u32 val)
*/
static inline __u8 sh_wdt_read_cnt(void)
{
return ctrl_inb(WTCNT_R);
return __raw_readb(WTCNT_R);
}
/**
@ -136,7 +136,7 @@ static inline __u8 sh_wdt_read_cnt(void)
*/
static inline void sh_wdt_write_cnt(__u8 val)
{
ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
__raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
}
/**
@ -146,7 +146,7 @@ static inline void sh_wdt_write_cnt(__u8 val)
*/
static inline __u8 sh_wdt_read_csr(void)
{
return ctrl_inb(WTCSR_R);
return __raw_readb(WTCSR_R);
}
/**
@ -158,7 +158,7 @@ static inline __u8 sh_wdt_read_csr(void)
*/
static inline void sh_wdt_write_csr(__u8 val)
{
ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
__raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
}
#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
#endif /* __KERNEL__ */

View file

@ -44,7 +44,7 @@ static inline __u8 sh_wdt_read_rstcsr(void)
/*
* Same read/write brain-damage as for WTCNT here..
*/
return ctrl_inb(RSTCSR_R);
return __raw_readb(RSTCSR_R);
}
/**
@ -62,7 +62,7 @@ static inline void sh_wdt_write_rstcsr(__u8 val)
* we can't presently touch the WOVF bit, since the upper byte
* has to be swapped for this. So just leave it alone..
*/
ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
__raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
}
#endif /* __ASM_CPU_SH2_WATCHDOG_H */

View file

@ -17,25 +17,25 @@
static __inline__ void sh_dac_enable(int channel)
{
unsigned char v;
v = ctrl_inb(DACR);
v = __raw_readb(DACR);
if(channel) v |= DACR_DAOE1;
else v |= DACR_DAOE0;
ctrl_outb(v,DACR);
__raw_writeb(v,DACR);
}
static __inline__ void sh_dac_disable(int channel)
{
unsigned char v;
v = ctrl_inb(DACR);
v = __raw_readb(DACR);
if(channel) v &= ~DACR_DAOE1;
else v &= ~DACR_DAOE0;
ctrl_outb(v,DACR);
__raw_writeb(v,DACR);
}
static __inline__ void sh_dac_output(u8 value, int channel)
{
if(channel) ctrl_outb(value,DADR1);
else ctrl_outb(value,DADR0);
if(channel) __raw_writeb(value,DADR1);
else __raw_writeb(value,DADR0);
}
#endif /* __ASM_CPU_SH3_DAC_H */

View file

@ -19,12 +19,12 @@
#include <asm/io_generic.h>
#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg)
#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg)
#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg)
#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg)
#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg)
#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg)
#define SETBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) | mask, reg)
#define SETBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) | mask, reg)
#define SETBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) | mask, reg)
#define CLRBITS_OUTB(mask, reg) __raw_writeb(__raw_readb(reg) & ~mask, reg)
#define CLRBITS_OUTW(mask, reg) __raw_writew(__raw_readw(reg) & ~mask, reg)
#define CLRBITS_OUTL(mask, reg) __raw_writel(__raw_readl(reg) & ~mask, reg)
#define PA_LED PORT_PADR /* LED */

View file

@ -18,19 +18,19 @@ int adc_single(unsigned int channel)
off = (channel & 0x03) << 2;
csr = ctrl_inb(ADCSR);
csr = __raw_readb(ADCSR);
csr = channel | ADCSR_ADST | ADCSR_CKS;
ctrl_outb(csr, ADCSR);
__raw_writeb(csr, ADCSR);
do {
csr = ctrl_inb(ADCSR);
csr = __raw_readb(ADCSR);
} while ((csr & ADCSR_ADF) == 0);
csr &= ~(ADCSR_ADF | ADCSR_ADST);
ctrl_outb(csr, ADCSR);
__raw_writeb(csr, ADCSR);
return (((ctrl_inb(ADDRAH + off) << 8) |
ctrl_inb(ADDRAL + off)) >> 6);
return (((__raw_readb(ADDRAH + off) << 8) |
__raw_readb(ADDRAL + off)) >> 6);
}
EXPORT_SYMBOL(adc_single);

View file

@ -61,10 +61,10 @@ onchip_setup(dsp);
static void __init speculative_execution_init(void)
{
/* Clear RABD */
ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
__raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
/* Flush the update */
(void)ctrl_inl(CPUOPM);
(void)__raw_readl(CPUOPM);
ctrl_barrier();
}
#else
@ -111,7 +111,7 @@ static void cache_init(void)
unsigned long ccr, flags;
jump_to_uncached();
ccr = ctrl_inl(CCR);
ccr = __raw_readl(CCR);
/*
* At this point we don't know whether the cache is enabled or not - a
@ -155,7 +155,7 @@ static void cache_init(void)
for (addr = addrstart;
addr < addrstart + waysize;
addr += current_cpu_data.dcache.linesz)
ctrl_outl(0, addr);
__raw_writel(0, addr);
addrstart += current_cpu_data.dcache.way_incr;
} while (--ways);
@ -188,7 +188,7 @@ static void cache_init(void)
l2_cache_init();
ctrl_outl(flags, CCR);
__raw_writel(flags, CCR);
back_to_cached();
}
#else

View file

@ -123,7 +123,7 @@ static void enable_intc_irq(unsigned int irq)
bitmask = 1 << (irq - 32);
}
ctrl_outl(bitmask, reg);
__raw_writel(bitmask, reg);
}
static void disable_intc_irq(unsigned int irq)
@ -139,7 +139,7 @@ static void disable_intc_irq(unsigned int irq)
bitmask = 1 << (irq - 32);
}
ctrl_outl(bitmask, reg);
__raw_writel(bitmask, reg);
}
static void mask_and_ack_intc(unsigned int irq)
@ -170,11 +170,11 @@ void __init plat_irq_setup(void)
/* Disable all interrupts and set all priorities to 0 to avoid trouble */
ctrl_outl(-1, INTC_INTDSB_0);
ctrl_outl(-1, INTC_INTDSB_1);
__raw_writel(-1, INTC_INTDSB_0);
__raw_writel(-1, INTC_INTDSB_1);
for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
ctrl_outl( NO_PRIORITY, reg);
__raw_writel( NO_PRIORITY, reg);
#ifdef CONFIG_SH_CAYMAN
@ -199,7 +199,7 @@ void __init plat_irq_setup(void)
reg = INTC_ICR_SET;
i = IRQ_IRL0;
}
ctrl_outl(INTC_ICR_IRLM, reg);
__raw_writel(INTC_ICR_IRLM, reg);
/* Set interrupt priorities according to platform description */
for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
@ -207,7 +207,7 @@ void __init plat_irq_setup(void)
((i % INTC_INTPRI_PPREG) * 4);
if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
/* Upon the 7th, set Priority Register */
ctrl_outl(data, reg);
__raw_writel(data, reg);
data = 0;
reg += 8;
}

View file

@ -31,7 +31,7 @@ static const int pfc_divisors[] = {1,2,0,4};
static void master_clk_init(struct clk *clk)
{
clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
}
static struct clk_ops sh7619_master_clk_ops = {
@ -40,7 +40,7 @@ static struct clk_ops sh7619_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@ -50,7 +50,7 @@ static struct clk_ops sh7619_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
}
static struct clk_ops sh7619_bus_clk_ops = {

View file

@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
static void master_clk_init(struct clk *clk)
{
return 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7201_master_clk_ops = {
@ -43,7 +43,7 @@ static struct clk_ops sh7201_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@ -53,7 +53,7 @@ static struct clk_ops sh7201_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@ -63,7 +63,7 @@ static struct clk_ops sh7201_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inw(FREQCR) >> 4) & 0x0007);
int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
return clk->parent->rate / ifc_divisors[idx];
}

View file

@ -39,7 +39,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
static void master_clk_init(struct clk *clk)
{
clk->rate *= pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0003] * PLL2 ;
clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ;
}
static struct clk_ops sh7203_master_clk_ops = {
@ -48,7 +48,7 @@ static struct clk_ops sh7203_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@ -58,7 +58,7 @@ static struct clk_ops sh7203_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx-2];
}

View file

@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
static void master_clk_init(struct clk *clk)
{
clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7206_master_clk_ops = {
@ -43,7 +43,7 @@ static struct clk_ops sh7206_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@ -53,7 +53,7 @@ static struct clk_ops sh7206_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7206_bus_clk_ops = {
@ -62,7 +62,7 @@ static struct clk_ops sh7206_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
int idx = (__raw_readw(FREQCR) & 0x0007);
return clk->parent->rate / ifc_divisors[idx];
}

View file

@ -28,7 +28,7 @@ static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
static void master_clk_init(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
clk->rate *= pfc_divisors[idx];
@ -40,7 +40,7 @@ static struct clk_ops sh3_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
@ -52,7 +52,7 @@ static struct clk_ops sh3_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
return clk->parent->rate / stc_multipliers[idx];
@ -64,7 +64,7 @@ static struct clk_ops sh3_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
return clk->parent->rate / ifc_divisors[idx];

View file

@ -32,7 +32,7 @@ static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0003];
clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
}
static struct clk_ops sh7705_master_clk_ops = {
@ -41,7 +41,7 @@ static struct clk_ops sh7705_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ctrl_inw(FRQCR) & 0x0003;
int idx = __raw_readw(FRQCR) & 0x0003;
return clk->parent->rate / pfc_divisors[idx];
}
@ -51,7 +51,7 @@ static struct clk_ops sh7705_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
return clk->parent->rate / stc_multipliers[idx];
}
@ -61,7 +61,7 @@ static struct clk_ops sh7705_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
return clk->parent->rate / ifc_divisors[idx];
}

View file

@ -24,7 +24,7 @@ static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
static void master_clk_init(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
clk->rate *= pfc_divisors[idx];
@ -36,7 +36,7 @@ static struct clk_ops sh7706_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
@ -48,7 +48,7 @@ static struct clk_ops sh7706_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
return clk->parent->rate / stc_multipliers[idx];
@ -60,7 +60,7 @@ static struct clk_ops sh7706_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
return clk->parent->rate / ifc_divisors[idx];

View file

@ -24,7 +24,7 @@ static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
static void master_clk_init(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
clk->rate *= pfc_divisors[idx];
@ -36,7 +36,7 @@ static struct clk_ops sh7709_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
@ -48,7 +48,7 @@ static struct clk_ops sh7709_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = (frqcr & 0x0080) ?
((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
@ -61,7 +61,7 @@ static struct clk_ops sh7709_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
return clk->parent->rate / ifc_divisors[idx];

View file

@ -26,7 +26,7 @@ static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
}
static struct clk_ops sh7710_master_clk_ops = {
@ -35,7 +35,7 @@ static struct clk_ops sh7710_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0007);
int idx = (__raw_readw(FRQCR) & 0x0007);
return clk->parent->rate / md_table[idx];
}
@ -45,7 +45,7 @@ static struct clk_ops sh7710_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
return clk->parent->rate / md_table[idx];
}
@ -55,7 +55,7 @@ static struct clk_ops sh7710_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
return clk->parent->rate / md_table[idx];
}

View file

@ -23,7 +23,7 @@ static int divisors[] = { 1, 2, 3, 4, 6 };
static void master_clk_init(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = (frqcr & 0x0300) >> 8;
clk->rate *= multipliers[idx];
@ -35,7 +35,7 @@ static struct clk_ops sh7712_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = frqcr & 0x0007;
return clk->parent->rate / divisors[idx];
@ -47,7 +47,7 @@ static struct clk_ops sh7712_module_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int frqcr = __raw_readw(FRQCR);
int idx = (frqcr & 0x0030) >> 4;
return clk->parent->rate / divisors[idx];

View file

@ -30,23 +30,23 @@ int detect_cpu_and_cache_system(void)
addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
/* First, write back & invalidate */
data0 = ctrl_inl(addr0);
ctrl_outl(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
data1 = ctrl_inl(addr1);
ctrl_outl(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
data0 = __raw_readl(addr0);
__raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
data1 = __raw_readl(addr1);
__raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
/* Next, check if there's shadow or not */
data0 = ctrl_inl(addr0);
data0 = __raw_readl(addr0);
data0 ^= SH_CACHE_VALID;
ctrl_outl(data0, addr0);
data1 = ctrl_inl(addr1);
__raw_writel(data0, addr0);
data1 = __raw_readl(addr1);
data2 = data1 ^ SH_CACHE_VALID;
ctrl_outl(data2, addr1);
data3 = ctrl_inl(addr0);
__raw_writel(data2, addr1);
data3 = __raw_readl(addr0);
/* Lastly, invaliate them. */
ctrl_outl(data0&~SH_CACHE_VALID, addr0);
ctrl_outl(data2&~SH_CACHE_VALID, addr1);
__raw_writel(data0&~SH_CACHE_VALID, addr0);
__raw_writel(data2&~SH_CACHE_VALID, addr1);
back_to_cached();
@ -94,9 +94,9 @@ int detect_cpu_and_cache_system(void)
boot_cpu_data.dcache.way_incr = (1 << 13);
boot_cpu_data.dcache.entry_mask = 0x1ff0;
boot_cpu_data.dcache.sets = 512;
ctrl_outl(CCR_CACHE_32KB, CCR3_REG);
__raw_writel(CCR_CACHE_32KB, CCR3_REG);
#else
ctrl_outl(CCR_CACHE_16KB, CCR3_REG);
__raw_writel(CCR_CACHE_16KB, CCR3_REG);
#endif
#endif
}

View file

@ -58,7 +58,7 @@ static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
void __init plat_irq_setup_pins(int mode)
{
if (mode == IRQ_MODE_IRQ) {
ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
__raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
register_intc_controller(&intc_desc_irq0123);
return;
}

View file

@ -23,7 +23,7 @@ static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
static unsigned long emi_clk_recalc(struct clk *clk)
{
int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
return clk->parent->rate / frqcr3_divisors[idx];
}
@ -52,7 +52,7 @@ static struct clk sh4202_emi_clk = {
static unsigned long femi_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
return clk->parent->rate / frqcr3_divisors[idx];
}
@ -92,7 +92,7 @@ static void shoc_clk_init(struct clk *clk)
static unsigned long shoc_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
return clk->parent->rate / frqcr3_divisors[idx];
}
@ -122,10 +122,10 @@ static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
tmp = frqcr3_lookup(clk, rate);
frqcr3 = ctrl_inl(CPG2_FRQCR3);
frqcr3 = __raw_readl(CPG2_FRQCR3);
frqcr3 &= ~(0x0007 << 6);
frqcr3 |= tmp << 6;
ctrl_outl(frqcr3, CPG2_FRQCR3);
__raw_writel(frqcr3, CPG2_FRQCR3);
clk->rate = clk->parent->rate / frqcr3_divisors[tmp];

View file

@ -28,7 +28,7 @@ static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0007];
clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
}
static struct clk_ops sh4_master_clk_ops = {
@ -37,7 +37,7 @@ static struct clk_ops sh4_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0007);
int idx = (__raw_readw(FRQCR) & 0x0007);
return clk->parent->rate / pfc_divisors[idx];
}
@ -47,7 +47,7 @@ static struct clk_ops sh4_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
return clk->parent->rate / bfc_divisors[idx];
}
@ -57,7 +57,7 @@ static struct clk_ops sh4_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
return clk->parent->rate / ifc_divisors[idx];
}

View file

@ -28,9 +28,9 @@ int __init detect_cpu_and_cache_system(void)
[9] = (1 << 16)
};
pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffffff;
prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;
cvr = (ctrl_inl(CCN_CVR));
pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
cvr = (__raw_readl(CCN_CVR));
/*
* Setup some sane SH-4 defaults for the icache

View file

@ -198,7 +198,7 @@ void __init plat_irq_setup_pins(int mode)
{
switch (mode) {
case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
register_intc_controller(&intc_desc_irlm);
break;
default:

View file

@ -442,7 +442,7 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
register_intc_controller(&intc_desc_irlm);
break;
default:

View file

@ -319,7 +319,7 @@ void __init plat_irq_setup_pins(int mode)
{
switch (mode) {
case IRQ_MODE_IRQ:
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
register_intc_controller(&intc_desc_irq);
break;
default:

View file

@ -43,9 +43,9 @@ static unsigned long *sq_bitmap;
#define store_queue_barrier() \
do { \
(void)ctrl_inl(P4SEG_STORE_QUE); \
ctrl_outl(0, P4SEG_STORE_QUE + 0); \
ctrl_outl(0, P4SEG_STORE_QUE + 8); \
(void)__raw_readl(P4SEG_STORE_QUE); \
__raw_writel(0, P4SEG_STORE_QUE + 0); \
__raw_writel(0, P4SEG_STORE_QUE + 8); \
} while (0);
/**
@ -123,8 +123,8 @@ static int __sq_remap(struct sq_mapping *map, unsigned long flags)
* straightforward, as we can just load up each queue's QACR with
* the physical address appropriately masked.
*/
ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
__raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
__raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
#endif
return 0;

View file

@ -35,7 +35,7 @@ static struct clk_ops sh7757_master_clk_ops = {
static void module_clk_recalc(struct clk *clk)
{
int idx = ctrl_inl(FRQCR) & 0x0000000f;
int idx = __raw_readl(FRQCR) & 0x0000000f;
clk->rate = clk->parent->rate / p1fc_divisors[idx];
}
@ -45,7 +45,7 @@ static struct clk_ops sh7757_module_clk_ops = {
static void bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) >> 8) & 0x0000000f;
int idx = (__raw_readl(FRQCR) >> 8) & 0x0000000f;
clk->rate = clk->parent->rate / bfc_divisors[idx];
}
@ -55,7 +55,7 @@ static struct clk_ops sh7757_bus_clk_ops = {
static void cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) >> 20) & 0x0000000f;
int idx = (__raw_readl(FRQCR) >> 20) & 0x0000000f;
clk->rate = clk->parent->rate / ifc_divisors[idx];
}
@ -78,7 +78,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
static void shyway_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) >> 12) & 0x0000000f;
int idx = (__raw_readl(FRQCR) >> 12) & 0x0000000f;
clk->rate = clk->parent->rate / sfc_divisors[idx];
}

View file

@ -22,7 +22,7 @@ static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= p0fc_divisors[(ctrl_inl(FRQCR) >> 4) & 0x07];
clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
}
static struct clk_ops sh7763_master_clk_ops = {
@ -31,7 +31,7 @@ static struct clk_ops sh7763_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07);
int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
return clk->parent->rate / p0fc_divisors[idx];
}
@ -41,7 +41,7 @@ static struct clk_ops sh7763_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07);
int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
return clk->parent->rate / bfc_divisors[idx];
}
@ -68,7 +68,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07);
int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
return clk->parent->rate / cfc_divisors[idx];
}

View file

@ -21,7 +21,7 @@ static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> 28) & 0x000f];
clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
}
static struct clk_ops sh7770_master_clk_ops = {
@ -30,7 +30,7 @@ static struct clk_ops sh7770_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
return clk->parent->rate / pfc_divisors[idx];
}
@ -40,7 +40,7 @@ static struct clk_ops sh7770_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) & 0x000f);
int idx = (__raw_readl(FRQCR) & 0x000f);
return clk->parent->rate / bfc_divisors[idx];
}
@ -50,7 +50,7 @@ static struct clk_ops sh7770_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
return clk->parent->rate / ifc_divisors[idx];
}

View file

@ -22,7 +22,7 @@ static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= pfc_divisors[ctrl_inl(FRQCR) & 0x0003];
clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
}
static struct clk_ops sh7780_master_clk_ops = {
@ -31,7 +31,7 @@ static struct clk_ops sh7780_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) & 0x0003);
int idx = (__raw_readl(FRQCR) & 0x0003);
return clk->parent->rate / pfc_divisors[idx];
}
@ -41,7 +41,7 @@ static struct clk_ops sh7780_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
return clk->parent->rate / bfc_divisors[idx];
}
@ -51,7 +51,7 @@ static struct clk_ops sh7780_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
return clk->parent->rate / ifc_divisors[idx];
}
@ -74,7 +74,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
return clk->parent->rate / cfc_divisors[idx];
}

View file

@ -33,7 +33,7 @@ static int cfc_divisors[] = { 1, 1, 4, 6 };
static void master_clk_init(struct clk *clk)
{
clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK];
}
static struct clk_ops shx3_master_clk_ops = {
@ -42,7 +42,7 @@ static struct clk_ops shx3_master_clk_ops = {
static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
int idx = ((__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK);
return clk->parent->rate / pfc_divisors[idx];
}
@ -52,7 +52,7 @@ static struct clk_ops shx3_module_clk_ops = {
static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
int idx = ((__raw_readl(FRQCR) >> BFC_POS) & BFC_MSK);
return clk->parent->rate / bfc_divisors[idx];
}
@ -62,7 +62,7 @@ static struct clk_ops shx3_bus_clk_ops = {
static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
int idx = ((__raw_readl(FRQCR) >> IFC_POS) & IFC_MSK);
return clk->parent->rate / ifc_divisors[idx];
}
@ -85,7 +85,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
int idx = ((__raw_readl(FRQCR) >> CFC_POS) & CFC_MSK);
return clk->parent->rate / cfc_divisors[idx];
}

View file

@ -596,7 +596,7 @@ void __init plat_early_device_setup(void)
void l2_cache_init(void)
{
/* Enable L2 cache */
ctrl_outl(L2_CACHE_ENABLE, RAMCR);
__raw_writel(L2_CACHE_ENABLE, RAMCR);
}
enum {

View file

@ -718,7 +718,7 @@ void __init plat_early_device_setup(void)
void l2_cache_init(void)
{
/* Enable L2 cache */
ctrl_outl(L2_CACHE_ENABLE, RAMCR);
__raw_writel(L2_CACHE_ENABLE, RAMCR);
}
enum {

View file

@ -487,17 +487,17 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
void __init plat_irq_setup(void)
{
/* disable IRQ3-0 + IRQ7-4 */
ctrl_outl(0xff000000, INTC_INTMSK0);
__raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
ctrl_outl(0xc0000000, INTC_INTMSK1);
ctrl_outl(0xfffefffe, INTC_INTMSK2);
__raw_writel(0xc0000000, INTC_INTMSK1);
__raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@ -507,32 +507,32 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ7654:
/* select IRQ mode for IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
/* select IRQ mode for IRL3-0 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl4567);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:

View file

@ -538,11 +538,11 @@ static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
void __init plat_irq_setup(void)
{
/* disable IRQ7-0 */
ctrl_outl(0xff000000, INTC_INTMSK0);
__raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
ctrl_outl(0xc0000000, INTC_INTMSK1);
ctrl_outl(0xfffefffe, INTC_INTMSK2);
__raw_writel(0xc0000000, INTC_INTMSK1);
__raw_writel(0xfffefffe, INTC_INTMSK2);
register_intc_controller(&intc_desc);
}
@ -552,27 +552,27 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ:
/* select IRQ mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl7654_desc);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:

View file

@ -694,17 +694,17 @@ static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
void __init plat_irq_setup(void)
{
/* disable IRQ7-0 */
ctrl_outl(0xff000000, INTC_INTMSK0);
__raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
ctrl_outl(0xc0000000, INTC_INTMSK1);
ctrl_outl(0xfffefffe, INTC_INTMSK2);
__raw_writel(0xc0000000, INTC_INTMSK1);
__raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@ -714,27 +714,27 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ:
/* select IRQ mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl7654_desc);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:

View file

@ -461,17 +461,17 @@ static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
void __init plat_irq_setup(void)
{
/* disable IRQ7-0 */
ctrl_outl(0xff000000, INTC_INTMSK0);
__raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
ctrl_outl(0xc0000000, INTC_INTMSK1);
ctrl_outl(0xfffefffe, INTC_INTMSK2);
__raw_writel(0xc0000000, INTC_INTMSK1);
__raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@ -481,27 +481,27 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ:
/* select IRQ mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl7654_desc);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:

View file

@ -541,17 +541,17 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
void __init plat_irq_setup(void)
{
/* disable IRQ3-0 + IRQ7-4 */
ctrl_outl(0xff000000, INTC_INTMSK0);
__raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
ctrl_outl(0xc0000000, INTC_INTMSK1);
ctrl_outl(0xfffefffe, INTC_INTMSK2);
__raw_writel(0xc0000000, INTC_INTMSK1);
__raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
/* disable holding function, ie enable "SH-4 Mode" */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@ -561,32 +561,32 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ7654:
/* select IRQ mode for IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
/* select IRQ mode for IRL3-0 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl4567);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:

View file

@ -867,14 +867,14 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
void __init plat_irq_setup(void)
{
/* disable IRQ3-0 + IRQ7-4 */
ctrl_outl(0xff000000, INTC_INTMSK0);
__raw_writel(0xff000000, INTC_INTMSK0);
/* disable IRL3-0 + IRL7-4 */
ctrl_outl(0xc0000000, INTC_INTMSK1);
ctrl_outl(0xfffefffe, INTC_INTMSK2);
__raw_writel(0xc0000000, INTC_INTMSK1);
__raw_writel(0xfffefffe, INTC_INTMSK2);
/* select IRL mode for IRL3-0 + IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
register_intc_controller(&intc_desc);
}
@ -884,32 +884,32 @@ void __init plat_irq_setup_pins(int mode)
switch (mode) {
case IRQ_MODE_IRQ7654:
/* select IRQ mode for IRL7-4 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
/* select IRQ mode for IRL3-0 */
ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
/* enable IRL7-4 but don't provide any masking */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
/* enable IRL0-3 but don't provide any masking */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL7654_MASK:
/* enable IRL7-4 and mask using cpu intc controller */
ctrl_outl(0x40000000, INTC_INTMSKCLR1);
__raw_writel(0x40000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl4567);
break;
case IRQ_MODE_IRL3210_MASK:
/* enable IRL0-3 and mask using cpu intc controller */
ctrl_outl(0x80000000, INTC_INTMSKCLR1);
__raw_writel(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:

Some files were not shown because too many files have changed in this diff Show more