trivial: fix typos s/paramter/parameter/ and s/excute/execute/ in documentation and source comments.
Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Martin Olsson
Jiri Kosina
parent
ab2274af05
commit
98a1708de1
22 changed files with 27 additions and 27 deletions
|
|
@ -38,7 +38,7 @@ Required properities:
|
|||
- reg : Should contain the address and the length of the GPIO bank
|
||||
register.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and the
|
||||
second cell is used to specify optional paramters (currently unused).
|
||||
second cell is used to specify optional parameters (currently unused).
|
||||
- gpio-controller : Marks the port as GPIO controller.
|
||||
|
||||
Example:
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ Required properties:
|
|||
"fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
|
||||
"fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and the
|
||||
second cell is used to specify optional paramters (currently unused).
|
||||
second cell is used to specify optional parameters (currently unused).
|
||||
- gpio-controller : Marks the port as GPIO controller.
|
||||
|
||||
Example of three SOC GPIO banks defined as gpio-controller nodes:
|
||||
|
|
|
|||
|
|
@ -64,7 +64,7 @@ __HEAD
|
|||
.org 0x100
|
||||
#
|
||||
# subroutine for loading from tape
|
||||
# Paramters:
|
||||
# Parameters:
|
||||
# R1 = device number
|
||||
# R2 = load address
|
||||
.Lloader:
|
||||
|
|
|
|||
|
|
@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
|
|||
/**
|
||||
* ata_acpi_exec_tfs - get then write drive taskfile settings
|
||||
* @dev: target ATA device
|
||||
* @nr_executed: out paramter for the number of executed commands
|
||||
* @nr_executed: out parameter for the number of executed commands
|
||||
*
|
||||
* Evaluate _GTF and excute returned taskfiles.
|
||||
* Evaluate _GTF and execute returned taskfiles.
|
||||
*
|
||||
* LOCKING:
|
||||
* EH context.
|
||||
|
|
|
|||
|
|
@ -2864,7 +2864,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
|
|||
/**
|
||||
* ata_set_mode - Program timings and issue SET FEATURES - XFER
|
||||
* @link: link on which timings will be programmed
|
||||
* @r_failed_dev: out paramter for failed device
|
||||
* @r_failed_dev: out parameter for failed device
|
||||
*
|
||||
* Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
|
||||
* ata_set_mode() fails, pointer to the failing device is
|
||||
|
|
|
|||
|
|
@ -1084,7 +1084,7 @@ static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
|
|||
struct pci_dev *dev = pvt->dev_d0f1;
|
||||
int enable = 1;
|
||||
|
||||
/* Allow module paramter override, else see if CPU supports parity */
|
||||
/* Allow module parameter override, else see if CPU supports parity */
|
||||
if (sysbus_parity != -1) {
|
||||
enable = sysbus_parity;
|
||||
} else if (cpu_id[0] &&
|
||||
|
|
|
|||
|
|
@ -183,7 +183,7 @@ int cf_command(int drvid, int mode,
|
|||
(mode != 1) ? "" : " 0 ",
|
||||
(mode != 1) ? "" : fwd_nr);
|
||||
|
||||
retval = divert_if.ll_cmd(&cs->ics); /* excute command */
|
||||
retval = divert_if.ll_cmd(&cs->ics); /* execute command */
|
||||
|
||||
if (!retval)
|
||||
{ cs->prev = NULL;
|
||||
|
|
|
|||
|
|
@ -1220,7 +1220,7 @@ static int __init ltpc_setup(char *str)
|
|||
if (ints[0] > 2) {
|
||||
dma = ints[3];
|
||||
}
|
||||
/* ignore any other paramters */
|
||||
/* ignore any other parameters */
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -62,7 +62,7 @@ struct e1000_info;
|
|||
e_printk(KERN_NOTICE, adapter, format, ## arg)
|
||||
|
||||
|
||||
/* Interrupt modes, as used by the IntMode paramter */
|
||||
/* Interrupt modes, as used by the IntMode parameter */
|
||||
#define E1000E_INT_MODE_LEGACY 0
|
||||
#define E1000E_INT_MODE_MSI 1
|
||||
#define E1000E_INT_MODE_MSIX 2
|
||||
|
|
|
|||
|
|
@ -268,7 +268,7 @@ struct ehea_qp_init_attr {
|
|||
};
|
||||
|
||||
/*
|
||||
* Event Queue attributes, passed as paramter
|
||||
* Event Queue attributes, passed as parameter
|
||||
*/
|
||||
struct ehea_eq_attr {
|
||||
u32 type;
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ struct igbvf_adapter;
|
|||
/* Interrupt defines */
|
||||
#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
|
||||
|
||||
/* Interrupt modes, as used by the IntMode paramter */
|
||||
/* Interrupt modes, as used by the IntMode parameter */
|
||||
#define IGBVF_INT_MODE_LEGACY 0
|
||||
#define IGBVF_INT_MODE_MSI 1
|
||||
#define IGBVF_INT_MODE_MSIX 2
|
||||
|
|
|
|||
|
|
@ -371,7 +371,7 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
|
|||
int i;
|
||||
|
||||
/* If we haven't received a specific coalescing setting
|
||||
* (module param), we set the moderation paramters as follows:
|
||||
* (module param), we set the moderation parameters as follows:
|
||||
* - moder_cnt is set to the number of mtu sized packets to
|
||||
* satisfy our coelsing target.
|
||||
* - moder_time is set to a fixed value.
|
||||
|
|
|
|||
|
|
@ -141,7 +141,7 @@ static int ql_exec_mb_cmd(struct ql_adapter *qdev, struct mbox_params *mbcp)
|
|||
/* We are being asked by firmware to accept
|
||||
* a change to the port. This is only
|
||||
* a change to max frame sizes (Tx/Rx), pause
|
||||
* paramters, or loopback mode. We wake up a worker
|
||||
* parameters, or loopback mode. We wake up a worker
|
||||
* to handler processing this since a mailbox command
|
||||
* will need to be sent to ACK the request.
|
||||
*/
|
||||
|
|
@ -371,7 +371,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
|
|||
/* We are being asked by firmware to accept
|
||||
* a change to the port. This is only
|
||||
* a change to max frame sizes (Tx/Rx), pause
|
||||
* paramters, or loopback mode.
|
||||
* parameters, or loopback mode.
|
||||
*/
|
||||
case AEN_IDC_REQ:
|
||||
status = ql_idc_req_aen(qdev);
|
||||
|
|
@ -380,7 +380,7 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
|
|||
/* Process and inbound IDC event.
|
||||
* This will happen when we're trying to
|
||||
* change tx/rx max frame size, change pause
|
||||
* paramters or loopback mode.
|
||||
* parameters or loopback mode.
|
||||
*/
|
||||
case AEN_IDC_CMPLT:
|
||||
case AEN_IDC_EXT:
|
||||
|
|
|
|||
|
|
@ -413,7 +413,7 @@ struct smt_p_reason {
|
|||
#define SMT_RDF_SUCCESS 0x00000003 /* success (PMF) */
|
||||
#define SMT_RDF_BADSET 0x00000004 /* bad set count (PMF) */
|
||||
#define SMT_RDF_ILLEGAL 0x00000005 /* read only (PMF) */
|
||||
#define SMT_RDF_NOPARAM 0x6 /* paramter not supported (PMF) */
|
||||
#define SMT_RDF_NOPARAM 0x6 /* parameter not supported (PMF) */
|
||||
#define SMT_RDF_RANGE 0x8 /* out of range */
|
||||
#define SMT_RDF_AUTHOR 0x9 /* not autohorized */
|
||||
#define SMT_RDF_LENGTH 0x0a /* length error */
|
||||
|
|
|
|||
|
|
@ -79,7 +79,7 @@ MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
|
|||
MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
|
||||
MODULE_FIRMWARE(FW_NAME);
|
||||
|
||||
/* Module paramters */
|
||||
/* Module parameters */
|
||||
|
||||
/* Ring Speed 0,4,16
|
||||
* 0 = Autosense
|
||||
|
|
|
|||
|
|
@ -169,7 +169,7 @@ static char *open_min_error[] = {
|
|||
"Monitor Contention failer for RPL", "FDX Protocol Error"
|
||||
};
|
||||
|
||||
/* Module paramters */
|
||||
/* Module parameters */
|
||||
|
||||
/* Ring Speed 0,4,16
|
||||
* 0 = Autosense
|
||||
|
|
|
|||
|
|
@ -132,7 +132,7 @@ static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost",
|
|||
"Reserved", "Reserved", "No Monitor Detected for RPL",
|
||||
"Monitor Contention failer for RPL", "FDX Protocol Error"};
|
||||
|
||||
/* Module paramters */
|
||||
/* Module parameters */
|
||||
|
||||
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
|
||||
MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ;
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@
|
|||
*
|
||||
* Limitation:
|
||||
* Can only get/set setttings of the first queue.
|
||||
* Need to re-open the interface manually after changing some paramters.
|
||||
* Need to re-open the interface manually after changing some parameters.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
|
|
|
|||
|
|
@ -235,7 +235,7 @@ void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
|
|||
* @rt2x00dev: Pointer to &struct rt2x00_dev.
|
||||
*
|
||||
* Initialize work structure and all link tuning related
|
||||
* paramters. This will not start the link tuning process itself.
|
||||
* parameters. This will not start the link tuning process itself.
|
||||
*/
|
||||
void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
|
||||
|
||||
|
|
|
|||
|
|
@ -138,7 +138,7 @@ psa_read(struct net_device * dev,
|
|||
|
||||
/*------------------------------------------------------------------*/
|
||||
/*
|
||||
* Write the Paramter Storage Area to the WaveLAN card's memory
|
||||
* Write the Parameter Storage Area to the WaveLAN card's memory
|
||||
*/
|
||||
static void
|
||||
psa_write(struct net_device * dev,
|
||||
|
|
|
|||
|
|
@ -827,8 +827,8 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
|
|||
* @reftag: out: ref tag (reference tag)
|
||||
*
|
||||
* Description:
|
||||
* Extract DIF paramters from the command if possible. Otherwise,
|
||||
* use default paratmers.
|
||||
* Extract DIF parameters from the command if possible. Otherwise,
|
||||
* use default parameters.
|
||||
*
|
||||
**/
|
||||
static inline void
|
||||
|
|
|
|||
|
|
@ -203,7 +203,7 @@
|
|||
#define SIS_WEISR_B 0xac
|
||||
|
||||
|
||||
/* Playback DMA parameters (paramter RAM) */
|
||||
/* Playback DMA parameters (parameter RAM) */
|
||||
#define SIS_PLAY_DMA_OFFSET 0x0000
|
||||
#define SIS_PLAY_DMA_SIZE 0x10
|
||||
#define SIS_PLAY_DMA_ADDR(addr, num) \
|
||||
|
|
@ -228,7 +228,7 @@
|
|||
#define SIS_PLAY_DMA_SSO_MASK 0xffff0000
|
||||
#define SIS_PLAY_DMA_ESO_MASK 0x0000ffff
|
||||
|
||||
/* Capture DMA parameters (paramter RAM) */
|
||||
/* Capture DMA parameters (parameter RAM) */
|
||||
#define SIS_CAPTURE_DMA_OFFSET 0x0800
|
||||
#define SIS_CAPTURE_DMA_SIZE 0x10
|
||||
#define SIS_CAPTURE_DMA_ADDR(addr, num) \
|
||||
|
|
|
|||
Loading…
Reference in a new issue