Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Automatic merge of kernel.org:/home/rmk/linux-2.6-serial.git

Browse source
This commit is contained in:
Linus Torvalds 2005-04-26 09:02:40 -07:00
commit 97af11286d
8 changed files with 84 additions and 111 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
drivers/serial/21285.c
View file

@ -110,7 +110,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
port->icount.rx++;
rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
if (rxs & RXSTAT_ANYERR) {
if (unlikely(rxs & RXSTAT_ANYERR)) {
if (rxs & RXSTAT_PARITY)
port->icount.parity++;
else if (rxs & RXSTAT_FRAME)

53
drivers/serial/8250_hp300.c
View file

@ -9,15 +9,15 @@
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/dio.h>
#include <linux/console.h>
#include <asm/io.h>
#include "8250.h"
#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
#endif
@ -163,7 +163,7 @@ int __init hp300_setup_serial_console(void)
static int __devinit hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
struct serial_struct serial_req;
struct uart_port port;
int line;
#ifdef CONFIG_SERIAL_8250_CONSOLE
@ -172,21 +172,22 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
return 0;
}
#endif
memset(&serial_req, 0, sizeof(struct serial_struct));
memset(&port, 0, sizeof(struct uart_port));
/* Memory mapped I/O */
serial_req.io_type = SERIAL_IO_MEM;
serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
serial_req.irq = d->ipl;
serial_req.baud_base = HPDCA_BAUD_BASE;
serial_req.iomap_base = (d->resource.start + UART_OFFSET);
serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
serial_req.iomem_reg_shift = 1;
line = register_serial(&serial_req);
port.iotype = UPIO_MEM;
port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
port.irq = d->ipl;
port.uartclk = HPDCA_BAUD_BASE * 16;
port.mapbase = (d->resource.start + UART_OFFSET);
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
port.regshift = 1;
port.dev = &d->dev;
line = serial8250_register_port(&port);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
" irq %d failed\n", d->scode, serial_req.irq);
" irq %d failed\n", d->scode, port.irq);
return -ENOMEM;
}
@ -209,7 +210,7 @@ static int __init hp300_8250_init(void)
#ifdef CONFIG_HPAPCI
int line;
unsigned long base;
struct serial_struct serial_req;
struct uart_port uport;
struct hp300_port *port;
int i;
#endif
@ -251,25 +252,25 @@ static int __init hp300_8250_init(void)
if (!port)
return -ENOMEM;
memset(&serial_req, 0, sizeof(struct serial_struct));
memset(&uport, 0, sizeof(struct uart_port));
base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
/* Memory mapped I/O */
serial_req.io_type = SERIAL_IO_MEM;
serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
uport.iotype = UPIO_MEM;
uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
/* XXX - no interrupt support yet */
serial_req.irq = 0;
serial_req.baud_base = HPAPCI_BAUD_BASE;
serial_req.iomap_base = base;
serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
serial_req.iomem_reg_shift = 2;
uport.irq = 0;
uport.uartclk = HPAPCI_BAUD_BASE * 16;
uport.mapbase = base;
uport.membase = (char *)(base + DIO_VIRADDRBASE);
uport.regshift = 2;
line = register_serial(&serial_req);
line = serial8250_register_port(&uport);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d"
" irq %d failed\n", i, serial_req.irq);
" irq %d failed\n", i, uport.irq);
kfree(port);
continue;
}
@ -299,7 +300,7 @@ static void __devexit hpdca_remove_one(struct dio_dev *d)
/* Disable board-interrupts */
out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
}
unregister_serial(line);
serial8250_unregister_port(line);
}
#endif
@ -309,7 +310,7 @@ static void __exit hp300_8250_exit(void)
struct hp300_port *port, *to_free;
for (port = hp300_ports; port; ) {
unregister_serial(port->line);
serial8250_unregister_port(port->line);
to_free = port;
port = port->next;
kfree(to_free);

2
drivers/serial/amba-pl010.c
View file

@ -172,7 +172,7 @@ pl010_rx_chars(struct uart_port *port)
* out of the main execution path
*/
rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
if (rsr & UART01x_RSR_ANY) {
if (unlikely(rsr & UART01x_RSR_ANY)) {
if (rsr & UART01x_RSR_BE) {
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
port->icount.brk++;

2
drivers/serial/amba-pl011.c
View file

@ -137,7 +137,7 @@ pl011_rx_chars(struct uart_amba_port *uap)
* out of the main execution path
*/
rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
if (rsr & UART01x_RSR_ANY) {
if (unlikely(rsr & UART01x_RSR_ANY)) {
if (rsr & UART01x_RSR_BE) {
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
uap->port.icount.brk++;

67
drivers/serial/clps711x.c
View file

@ -116,54 +116,43 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
* Note that the error handling code is
* out of the main execution path
*/
if (ch & UART_ANY_ERR)
goto handle_error;
if (unlikely(ch & UART_ANY_ERR)) {
if (ch & UARTDR_PARERR)
port->icount.parity++;
else if (ch & UARTDR_FRMERR)
port->icount.frame++;
if (ch & UARTDR_OVERR)
port->icount.overrun++;
ch &= port->read_status_mask;
if (ch & UARTDR_PARERR)
flg = TTY_PARITY;
else if (ch & UARTDR_FRMERR)
flg = TTY_FRAME;
#ifdef SUPPORT_SYSRQ
port->sysrq = 0;
#endif
}
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
error_return:
tty_insert_flip_char(tty, ch, flg);
ignore_char:
status = clps_readl(SYSFLG(port));
}
out:
tty_flip_buffer_push(tty);
return IRQ_HANDLED;
handle_error:
if (ch & UARTDR_PARERR)
port->icount.parity++;
else if (ch & UARTDR_FRMERR)
port->icount.frame++;
if (ch & UARTDR_OVERR)
port->icount.overrun++;
if (ch & port->ignore_status_mask) {
if (++ignored > 100)
goto out;
goto ignore_char;
}
ch &= port->read_status_mask;
if (ch & UARTDR_PARERR)
flg = TTY_PARITY;
else if (ch & UARTDR_FRMERR)
flg = TTY_FRAME;
if (ch & UARTDR_OVERR) {
/*
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
tty_insert_flip_char(tty, ch, flg);
ch = 0;
flg = TTY_OVERRUN;
if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0)
tty_insert_flip_char(tty, ch, flg);
if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
ignore_char:
status = clps_readl(SYSFLG(port));
}
#ifdef SUPPORT_SYSRQ
port->sysrq = 0;
#endif
goto error_return;
tty_flip_buffer_push(tty);
return IRQ_HANDLED;
}
static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)

2
drivers/serial/s3c2410.c
View file

@ -364,7 +364,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
flag = TTY_NORMAL;
port->icount.rx++;
if (uerstat & S3C2410_UERSTAT_ANY) {
if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
ch, uerstat);

65
drivers/serial/sa1100.c
View file

@ -214,56 +214,39 @@ sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
* note that the error handling code is
* out of the main execution path
*/
if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR))
goto handle_error;
if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) {
if (status & UTSR1_TO_SM(UTSR1_PRE))
sport->port.icount.parity++;
else if (status & UTSR1_TO_SM(UTSR1_FRE))
sport->port.icount.frame++;
if (status & UTSR1_TO_SM(UTSR1_ROR))
sport->port.icount.overrun++;
status &= sport->port.read_status_mask;
if (status & UTSR1_TO_SM(UTSR1_PRE))
flg = TTY_PARITY;
else if (status & UTSR1_TO_SM(UTSR1_FRE))
flg = TTY_FRAME;
#ifdef SUPPORT_SYSRQ
sport->port.sysrq = 0;
#endif
}
if (uart_handle_sysrq_char(&sport->port, ch, regs))
goto ignore_char;
error_return:
tty_insert_flip_char(tty, ch, flg);
if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0)
tty_insert_flip_char(tty, ch, flg);
if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR))
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
ignore_char:
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
UTSR0_TO_SM(UART_GET_UTSR0(sport));
}
out:
tty_flip_buffer_push(tty);
return;
handle_error:
if (status & UTSR1_TO_SM(UTSR1_PRE))
sport->port.icount.parity++;
else if (status & UTSR1_TO_SM(UTSR1_FRE))
sport->port.icount.frame++;
if (status & UTSR1_TO_SM(UTSR1_ROR))
sport->port.icount.overrun++;
if (status & sport->port.ignore_status_mask) {
if (++ignored > 100)
goto out;
goto ignore_char;
}
status &= sport->port.read_status_mask;
if (status & UTSR1_TO_SM(UTSR1_PRE))
flg = TTY_PARITY;
else if (status & UTSR1_TO_SM(UTSR1_FRE))
flg = TTY_FRAME;
if (status & UTSR1_TO_SM(UTSR1_ROR)) {
/*
* overrun does *not* affect the character
* we read from the FIFO
*/
tty_insert_flip_char(tty, ch, flg);
ch = 0;
flg = TTY_OVERRUN;
}
#ifdef SUPPORT_SYSRQ
sport->port.sysrq = 0;
#endif
goto error_return;
}
static void sa1100_tx_chars(struct sa1100_port *sport)

2
drivers/serial/serial_lh7a40x.c
View file

@ -162,7 +162,7 @@ lh7a40xuart_rx_chars (struct uart_port* port)
flag = TTY_NORMAL;
++port->icount.rx;
if (data & RxError) { /* Quick check, short-circuit */
if (unlikely(data & RxError)) { /* Quick check, short-circuit */
if (data & RxBreak) {
data &= ~(RxFramingError | RxParityError);
++port->icount.brk;