diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 72562b8cf3be..fbb2ff171008 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -54,8 +54,11 @@ MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
#define i2cdprintk(fmt, arg...) if (ir_debug) \
printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
-/* Helper function for raw decoding at GPIO16 or GPIO18 */
+/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
+static int saa7134_rc5_irq(struct saa7134_dev *dev);
+static int saa7134_nec_irq(struct saa7134_dev *dev);
static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
+static void nec_task(unsigned long data);
/* -------------------- GPIO generic keycode builder -------------------- */
@@ -394,8 +397,12 @@ void saa7134_input_irq(struct saa7134_dev *dev)
if (!ir->running)
return;
- if (!ir->polling && !ir->raw_decode) {
+ if (ir->nec_gpio) {
+ saa7134_nec_irq(dev);
+ } else if (!ir->polling && !ir->rc5_gpio && !ir->raw_decode) {
build_key(dev);
+ } else if (ir->rc5_gpio) {
+ saa7134_rc5_irq(dev);
} else if (ir->raw_decode) {
saa7134_raw_decode_irq(dev);
}
@@ -441,6 +448,17 @@ static int __saa7134_ir_start(void *priv)
(unsigned long)dev);
ir->timer.expires = jiffies + HZ;
add_timer(&ir->timer);
+ } else if (ir->rc5_gpio) {
+ /* set timer_end for code completion */
+ init_timer(&ir->timer_end);
+ ir->timer_end.function = ir_rc5_timer_end;
+ ir->timer_end.data = (unsigned long)ir;
+ ir->shift_by = 2;
+ ir->start = 0x2;
+ ir->addr = 0x17;
+ ir->rc5_remote_gap = ir_rc5_remote_gap;
+ } else if (ir->nec_gpio) {
+ tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
} else if (ir->raw_decode) {
/* set timer_end for code completion */
init_timer(&ir->timer_end);
@@ -468,6 +486,10 @@ static void __saa7134_ir_stop(void *priv)
return;
if (dev->remote->polling)
del_timer_sync(&dev->remote->timer);
+ else if (ir->rc5_gpio)
+ del_timer_sync(&ir->timer_end);
+ else if (ir->nec_gpio)
+ tasklet_kill(&ir->tlet);
else if (ir->raw_decode) {
del_timer_sync(&ir->timer_end);
ir->active = 0;
@@ -509,6 +531,40 @@ static void saa7134_ir_close(struct rc_dev *rc)
__saa7134_ir_stop(dev);
}
+
+static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
+{
+ struct saa7134_dev *dev = rc->priv;
+ struct card_ir *ir = dev->remote;
+ u32 nec_gpio, rc5_gpio;
+
+ if (ir_type == IR_TYPE_RC5) {
+ dprintk("Changing protocol to RC5\n");
+ nec_gpio = 0;
+ rc5_gpio = 1;
+ } else if (ir_type == IR_TYPE_NEC) {
+ dprintk("Changing protocol to NEC\n");
+ nec_gpio = 1;
+ rc5_gpio = 0;
+ } else {
+ dprintk("IR protocol type %ud is not supported\n",
+ (unsigned)ir_type);
+ return -EINVAL;
+ }
+
+ if (ir->running) {
+ saa7134_ir_stop(dev);
+ ir->nec_gpio = nec_gpio;
+ ir->rc5_gpio = rc5_gpio;
+ saa7134_ir_start(dev);
+ } else {
+ ir->nec_gpio = nec_gpio;
+ ir->rc5_gpio = rc5_gpio;
+ }
+
+ return 0;
+}
+
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct card_ir *ir;
@@ -518,7 +574,10 @@ int saa7134_input_init1(struct saa7134_dev *dev)
u32 mask_keydown = 0;
u32 mask_keyup = 0;
int polling = 0;
+ int rc5_gpio = 0;
+ int nec_gpio = 0;
int raw_decode = 0;
+ int allow_protocol_change = 0;
int err;
if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -708,10 +767,9 @@ int saa7134_input_init1(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_ENCORE_ENLTV_FM53:
ir_codes = RC_MAP_ENCORE_ENLTV_FM53;
- mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */
- mask_keyup = 0x0040000;
- mask_keycode = 0xffff;
- raw_decode = 1;
+ mask_keydown = 0x0040000;
+ mask_keycode = 0x00007f;
+ nec_gpio = 1;
break;
case SAA7134_BOARD_10MOONSTVMASTER3:
ir_codes = RC_MAP_ENCORE_ENLTV;
@@ -771,6 +829,8 @@ int saa7134_input_init1(struct saa7134_dev *dev)
ir->mask_keydown = mask_keydown;
ir->mask_keyup = mask_keyup;
ir->polling = polling;
+ ir->rc5_gpio = rc5_gpio;
+ ir->nec_gpio = nec_gpio;
ir->raw_decode = raw_decode;
/* init input device */
@@ -785,6 +845,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
if (raw_decode)
rc->driver_type = RC_DRIVER_IR_RAW;
+ if (!raw_decode && allow_protocol_change) {
+ rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ rc->change_protocol = saa7134_ir_change_protocol;
+ }
+
rc->input_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_PCI;
@@ -958,3 +1023,152 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
return 1;
}
+
+static int saa7134_rc5_irq(struct saa7134_dev *dev)
+{
+ struct card_ir *ir = dev->remote;
+ struct timeval tv;
+ u32 gap;
+ unsigned long current_jiffies, timeout;
+
+ /* get time of bit */
+ current_jiffies = jiffies;
+ do_gettimeofday(&tv);
+
+ /* avoid overflow with gap >1s */
+ if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+ gap = 200000;
+ } else {
+ gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+ tv.tv_usec - ir->base_time.tv_usec;
+ }
+
+ /* active code => add bit */
+ if (ir->active) {
+ /* only if in the code (otherwise spurious IRQ or timer
+ late) */
+ if (ir->last_bit < 28) {
+ ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+ ir_rc5_remote_gap;
+ ir->code |= 1 << ir->last_bit;
+ }
+ /* starting new code */
+ } else {
+ ir->active = 1;
+ ir->code = 0;
+ ir->base_time = tv;
+ ir->last_bit = 0;
+
+ timeout = current_jiffies + (500 + 30 * HZ) / 1000;
+ mod_timer(&ir->timer_end, timeout);
+ }
+
+ return 1;
+}
+
+static void nec_task(unsigned long data)
+{
+ struct saa7134_dev *dev = (struct saa7134_dev *) data;
+ struct card_ir *ir;
+ struct timeval tv;
+ int count, pulse, oldpulse, gap;
+ u32 ircode = 0, not_code = 0;
+ int ngap = 0;
+
+ if (!data) {
+ printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n");
+ /* GPIO will be kept disabled */
+ return;
+ }
+
+ ir = dev->remote;
+
+ /* rising SAA7134_GPIO_GPRESCAN reads the status */
+ saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+ saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+ oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
+ pulse = oldpulse;
+
+ do_gettimeofday(&tv);
+ ir->base_time = tv;
+
+ /* Decode NEC pulsecode. This code can take up to 76.5 ms to run.
+ Unfortunately, using IRQ to decode pulse didn't work, since it uses
+ a pulse train of 38KHz. This means one pulse on each 52 us
+ */
+ do {
+ /* Wait until the end of pulse/space or 5 ms */
+ for (count = 0; count < 500; count++) {
+ udelay(10);
+ /* rising SAA7134_GPIO_GPRESCAN reads the status */
+ saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+ saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+ pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)
+ & ir->mask_keydown;
+ if (pulse != oldpulse)
+ break;
+ }
+
+ do_gettimeofday(&tv);
+ gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+ tv.tv_usec - ir->base_time.tv_usec;
+
+ if (!pulse) {
+ /* Bit 0 has 560 us, while bit 1 has 1120 us.
+ Do something only if bit == 1
+ */
+ if (ngap && (gap > 560 + 280)) {
+ unsigned int shift = ngap - 1;
+
+ /* Address first, then command */
+ if (shift < 8) {
+ shift += 8;
+ ircode |= 1 << shift;
+ } else if (shift < 16) {
+ not_code |= 1 << shift;
+ } else if (shift < 24) {
+ shift -= 16;
+ ircode |= 1 << shift;
+ } else {
+ shift -= 24;
+ not_code |= 1 << shift;
+ }
+ }
+ ngap++;
+ }
+
+
+ ir->base_time = tv;
+
+ /* TIMEOUT - Long pulse */
+ if (gap >= 5000)
+ break;
+ oldpulse = pulse;
+ } while (ngap < 32);
+
+ if (ngap == 32) {
+ /* FIXME: should check if not_code == ~ircode */
+ ir->code = ir_extract_bits(ircode, ir->mask_keycode);
+
+ dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
+ ir->code, ircode, not_code);
+
+ ir_keydown(ir->dev, ir->code, 0);
+ } else {
+ dprintk("Repeat last key\n");
+ ir_repeat(ir->dev);
+ }
+
+ saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
+}
+
+static int saa7134_nec_irq(struct saa7134_dev *dev)
+{
+ struct card_ir *ir = dev->remote;
+
+ saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
+ tasklet_schedule(&ir->tlet);
+
+ return 1;
+}
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index a6c726fe4c5d..4e37b8bfb6fa 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/tuner.h>
-#include <media/ir-core.h>
+#include <media/ir-common.h>
#include <media/ir-kbd-i2c.h>
#include <media/videobuf-dma-sg.h>
#include <sound/core.h>