Merge branch 'linus' into sched/core

Merge reason: we want to queue up dependent cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/ABI/testing/sysfs-bus-rbd

@@ -0,0 +1,83 @@
+What:		/sys/bus/rbd/
+Date:		November 2010
+Contact:	Yehuda Sadeh <yehuda@hq.newdream.net>,
+		Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Removal of a device:
+
+  $ echo <dev-id> > /sys/bus/rbd/remove
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_id
+
+	The ceph unique client id that was assigned for this specific session.
+
+major
+
+	The block device major number.
+
+name
+
+	The name of the rbd image.
+
+pool
+
+	The pool where this rbd image resides. The pool-name pair is unique
+	per rados system.
+
+size
+
+	The size (in bytes) of the mapped block device.
+
+refresh
+
+	Writing to this file will reread the image header data and set
+	all relevant datastructures accordingly.
+
+current_snap
+
+	The current snapshot for which the device is mapped.
+
+create_snap
+
+	Create a snapshot:
+
+	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
+
+rollback_snap
+
+	Rolls back data to the specified snapshot. This goes over the entire
+	list of rados blocks and sends a rollback command to each.
+
+	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
+
+snap_*
+
+	A directory per each snapshot
+
+
+Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
+-------------------------------------------------------------
+
+id
+
+	The rados internal snapshot id assigned for this snapshot
+
+size
+
+	The size of the image when this snapshot was taken.
+
+

Documentation/ABI/testing/sysfs-platform-asus-laptop

@@ -47,6 +47,20 @@ Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
-		Control the bluetooth device. 1 means on, 0 means off.
+		Control the wlan device. 1 means on, 0 means off.
 		This may control the led, the device or both.
 Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wimax
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wimax device. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/asus_laptop/wwan
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wwan (3G) device. 1 means on, 0 means off.

Documentation/ABI/testing/sysfs-platform-eeepc-wmi

@@ -0,0 +1,10 @@
+What:		/sys/devices/platform/eeepc-wmi/cpufv
+Date:		Oct 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration (write-only).
+		There are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode

Documentation/DocBook/sh.tmpl

@@ -79,10 +79,6 @@
       </sect2>
     </sect1>
   </chapter>
-  <chapter id="clk">
-    <title>Clock Framework Extensions</title>
-!Iinclude/linux/sh_clk.h
-  </chapter>
   <chapter id="mach">
     <title>Machine Specific Interfaces</title>
     <sect1 id="dreamcast">

Documentation/driver-model/interface.txt

@@ -1,129 +0,0 @@
-
-Device Interfaces
-
-Introduction
-~~~~~~~~~~~~
-
-Device interfaces are the logical interfaces of device classes that correlate
-directly to userspace interfaces, like device nodes. 
-   
-Each device class may have multiple interfaces through which you can 
-access the same device. An input device may support the mouse interface, 
-the 'evdev' interface, and the touchscreen interface. A SCSI disk would 
-support the disk interface, the SCSI generic interface, and possibly a raw 
-device interface. 
-
-Device interfaces are registered with the class they belong to. As devices
-are added to the class, they are added to each interface registered with
-the class. The interface is responsible for determining whether the device
-supports the interface or not. 
-
-
-Programming Interface
-~~~~~~~~~~~~~~~~~~~~~
-
-struct device_interface {
-	char			* name;
-	rwlock_t		lock;
-	u32			devnum;
-	struct device_class	* devclass;
-
-	struct list_head	node;
-	struct driver_dir_entry	dir;
-
-	int (*add_device)(struct device *);
-	int (*add_device)(struct intf_data *);
-};
-
-int interface_register(struct device_interface *);
-void interface_unregister(struct device_interface *);
-
-
-An interface must specify the device class it belongs to. It is added
-to that class's list of interfaces on registration.
-
-
-Interfaces can be added to a device class at any time. Whenever it is
-added, each device in the class is passed to the interface's
-add_device callback. When an interface is removed, each device is
-removed from the interface.
-
-
-Devices
-~~~~~~~
-Once a device is added to a device class, it is added to each
-interface that is registered with the device class. The class
-is expected to place a class-specific data structure in 
-struct device::class_data. The interface can use that (along with
-other fields of struct device) to determine whether or not the driver
-and/or device support that particular interface.
-
-
-Data
-~~~~
-
-struct intf_data {
-	struct list_head	node;
-	struct device_interface	* intf;
-	struct device 		* dev;
-	u32			intf_num;
-};
-
-int interface_add_data(struct interface_data *);
-
-The interface is responsible for allocating and initializing a struct 
-intf_data and calling interface_add_data() to add it to the device's list
-of interfaces it belongs to. This list will be iterated over when the device
-is removed from the class (instead of all possible interfaces for a class).
-This structure should probably be embedded in whatever per-device data 
-structure the interface is allocating anyway.
-   
-Devices are enumerated within the interface. This happens in interface_add_data()
-and the enumerated value is stored in the struct intf_data for that device. 
-
-sysfs
-~~~~~
-Each interface is given a directory in the directory of the device
-class it belongs to:
-
-Interfaces get a directory in the class's directory as well:
-
-   class/
-   `-- input
-       |-- devices
-       |-- drivers
-       |-- mouse
-       `-- evdev
-
-When a device is added to the interface, a symlink is created that points 
-to the device's directory in the physical hierarchy:
-
-   class/
-   `-- input
-       |-- devices
-       |   `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-       |-- drivers
-       |   `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
-       |-- mouse
-       |   `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-       `-- evdev
-           `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-
-
-Future Plans
-~~~~~~~~~~~~
-A device interface is correlated directly with a userspace interface
-for a device, specifically a device node. For instance, a SCSI disk
-exposes at least two interfaces to userspace: the standard SCSI disk
-interface and the SCSI generic interface. It might also export a raw
-device interface. 
-
-Many interfaces have a major number associated with them and each
-device gets a minor number. Or, multiple interfaces might share one
-major number, and each will receive a range of minor numbers (like in
-the case of input devices).
-
-These major and minor numbers could be stored in the interface
-structure. Major and minor allocations could happen when the interface
-is registered with the class, or via a helper function. 
-

Documentation/edac.txt

@@ -196,7 +196,7 @@ csrow3.
 The representation of the above is reflected in the directory tree
 in EDAC's sysfs interface. Starting in directory
 /sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
 
 
 	..../edac/mc/
@@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
 		   ....
 
 Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
 
 
 	.../mc/mc0/
@@ -232,7 +232,7 @@ EDAC control and attribute files.
 
 
 In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
 
 
 Counter reset control file:
@@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
 'csrowX' DIRECTORIES
 
 In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
 
 
 Total Uncorrectable Errors count attribute file:

Documentation/fb/00-INDEX

@@ -4,33 +4,41 @@ please mail me.
 				    Geert Uytterhoeven <geert@linux-m68k.org>
 
 00-INDEX
-	- this file
+	- this file.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
 	- info on the ATI Rage128 frame buffer driver.
 cirrusfb.txt
 	- info on the driver for Cirrus Logic chipsets.
+cmap_xfbdev.txt
+	- an introduction to fbdev's cmap structures.
 deferred_io.txt
 	- an introduction to deferred IO.
+efifb.txt
+	- info on the EFI platform driver for Intel based Apple computers.
+ep93xx-fb.txt
+	- info on the driver for EP93xx LCD controller.
 fbcon.txt
 	- intro to and usage guide for the framebuffer console (fbcon).
 framebuffer.txt
 	- introduction to frame buffer devices.
-imacfb.txt
+gxfb.txt
-	- info on the generic EFI platform driver for Intel based Macs.
+	- info on the framebuffer driver for AMD Geode GX2 based processors.
 intel810.txt
 	- documentation for the Intel 810/815 framebuffer driver.
 intelfb.txt
 	- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
 internals.txt
 	- quick overview of frame buffer device internals.
+lxfb.txt
+	- info on the framebuffer driver for AMD Geode LX based processors.
 matroxfb.txt
 	- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
+metronomefb.txt
+	- info on the driver for the Metronome display controller.
 modedb.txt
 	- info on the video mode database.
-matroxfb.txt
-	- info on the Matrox frame buffer driver.
 pvr2fb.txt
 	- info on the PowerVR 2 frame buffer driver.
 pxafb.txt
@@ -39,13 +47,23 @@ s3fb.txt
 	- info on the fbdev driver for S3 Trio/Virge chips.
 sa1100fb.txt
 	- information about the driver for the SA-1100 LCD controller.
+sh7760fb.txt
+	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
-	- info on the TGA (DECChip 21030) frame buffer driver
+	- info on the TGA (DECChip 21030) frame buffer driver.
+tridentfb.txt
+	info on the framebuffer driver for some Trident chip based cards.
+uvesafb.txt
+	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt
-	- info on the VESA frame buffer device
+	- info on the VESA frame buffer device.
+viafb.modes
+	- list of modes for VIA Integration Graphic Chip.
+viafb.txt
+	- info on the VIA Integration Graphic Chip console framebuffer driver.
 vt8623fb.txt
 	- info on the fb driver for the graphics core in VIA VT8623 chipsets.

Documentation/filesystems/vfs.txt

@@ -660,11 +660,10 @@ struct address_space_operations {
   releasepage: releasepage is called on PagePrivate pages to indicate
         that the page should be freed if possible.  ->releasepage
         should remove any private data from the page and clear the
-        PagePrivate flag.  It may also remove the page from the
+        PagePrivate flag. If releasepage() fails for some reason, it must
-        address_space.  If this fails for some reason, it may indicate
+	indicate failure with a 0 return value.
-        failure with a 0 return value.
+	releasepage() is used in two distinct though related cases.  The
-	This is used in two distinct though related cases.  The first
+	first is when the VM finds a clean page with no active users and
-        is when the VM finds a clean page with no active users and
         wants to make it a free page.  If ->releasepage succeeds, the
         page will be removed from the address_space and become free.
 

Documentation/kernel-parameters.txt

@@ -2387,6 +2387,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			improve throughput, but will also increase the
 			amount of memory reserved for use by the client.
 
+	swapaccount[=0|1]
+			[KNL] Enable accounting of swap in memory resource
+			controller if no parameter or 1 is given or disable
+			it if 0 is given (See Documentation/cgroups/memory.txt)
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]

Documentation/networking/ip-sysctl.txt

@@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
 	Count buffering overhead as bytes/2^tcp_adv_win_scale
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
+	Possible values are [-31, 31], inclusive.
 	Default: 2
 
 tcp_allowed_congestion_control - STRING

Documentation/sh/clk.txt

@@ -1,32 +0,0 @@
-Clock framework on SuperH architecture
-
-The framework on SH extends existing API by the function clk_set_rate_ex,
-which prototype is as follows:
-
-    clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
-
-The algo_id parameter is used to specify algorithm used to recalculate clocks,
-adjanced to clock, specified as first argument. It is assumed that algo_id==0
-means no changes to adjanced clock
-
-Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
-if it is present in ops structure. The method should set the clock rate and adjust
-all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependent. For the sh7722, the following
-values are defined:
-
-	NO_CHANGE	= 0,
-	IUS_N1_N1,	/* I:U = N:1, U:Sh = N:1 */
-	IUS_322,	/* I:U:Sh = 3:2:2	 */
-	IUS_522,	/* I:U:Sh = 5:2:2 	 */
-	IUS_N11,	/* I:U:Sh = N:1:1	 */
-	SB_N1,		/* Sh:B = N:1		 */
-	SB3_N1,		/* Sh:B3 = N:1		 */
-	SB3_32,		/* Sh:B3 = 3:2		 */
-	SB3_43,		/* Sh:B3 = 4:3		 */
-	SB3_54,		/* Sh:B3 = 5:4		 */
-	BP_N1,		/* B:P	 = N:1		 */
-	IP_N1		/* I:P	 = N:1		 */
-
-Each of these constants means relation between clocks that can be set via the FRQCR
-register

MAINTAINERS

@@ -1359,7 +1359,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
-L:	bonding-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/
@@ -2060,7 +2060,7 @@ F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
 F:	drivers/base/
@@ -2080,7 +2080,7 @@ F:	include/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Chris Wilson <chris@chris-wilson.co.uk>
-L:	intel-gfx@lists.freedesktop.org
+L:	intel-gfx@lists.freedesktop.org (subscribers-only)
 L:	dri-devel@lists.freedesktop.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
 S:	Supported
@@ -2444,10 +2444,12 @@ F:	drivers/net/wan/sdla.c
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
-F:	drivers/video/fb*
+F:	drivers/video/
+F:	include/video/
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER
@@ -4062,9 +4064,8 @@ F:	drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 M:	Faisal Latif <faisal.latif@intel.com>
-M:	Chien Tung <chien.tin.tung@intel.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.neteffect.com
+W:	http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
 S:	Supported
 F:	drivers/infiniband/hw/nes/
 
@@ -5837,6 +5838,8 @@ M:	Chris Metcalf <cmetcalf@tilera.com>
 W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
+F:	drivers/char/hvc_tile.c
+F:	drivers/net/tile/
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -9,7 +9,7 @@ config ARM
 	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
-	select HAVE_KPROBES if (!XIP_KERNEL)
+	select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)

arch/arm/boot/Makefile

@@ -70,12 +70,7 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
-$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
-else
 $(obj)/uImage: STARTADDR=$(LOADADDR)
-endif
 
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)

arch/arm/boot/bootp/init.S

@@ -73,6 +73,8 @@ move:		ldmia	r4!, {r7 - r10}		@ move 32-bytes at a time
 
 		.size	_start, . - _start
 
+		.align
+
 		.type	data,#object
 data:		.word	initrd_start		@ source initrd address
 		.word	initrd_phys		@ destination initrd address

arch/arm/boot/compressed/head.S

@@ -125,9 +125,13 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
  * sort out different calling conventions
  */
 		.align
+		.arm				@ Always enter in ARM state
 start:
 		.type	start,#function
-		.rept	8
+ THUMB(		adr	r12, BSYM(1f)	)
+ THUMB(		bx	r12		)
+ THUMB(		.rept	6		)
+ ARM(		.rept	8		)
 		mov	r0, r0
 		.endr
 
@@ -135,6 +139,7 @@ start:
 		.word	0x016f2818		@ Magic numbers to help the loader
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
+ THUMB(		.thumb			)
 1:		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
@@ -174,7 +179,8 @@ not_angel:
 		ldr	sp, [r0, #28]
 #ifdef CONFIG_AUTO_ZRELADDR
 		@ determine final kernel image address
-		and	r4, pc, #0xf8000000
+		mov	r4, pc
+		and	r4, r4, #0xf8000000
 		add	r4, r4, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
@@ -445,7 +451,8 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  */
 		mov	r1, #0x1e
 		orr	r1, r1, #3 << 10
-		mov	r2, pc, lsr #20
+		mov	r2, pc
+		mov	r2, r2, lsr #20
 		orr	r1, r1, r2, lsl #20
 		add	r0, r3, r2, lsl #2
 		str	r1, [r0], #4
@@ -1084,6 +1091,6 @@ memdump:	mov	r12, r0
 reloc_end:
 
 		.align
-		.section ".stack", "w"
+		.section ".stack", "aw", %nobits
 user_stack:	.space	4096
 user_stack_end:

arch/arm/boot/compressed/vmlinux.lds.in

@@ -57,7 +57,7 @@ SECTIONS
   .bss			: { *(.bss) }
   _end = .;
 
-  .stack (NOLOAD)	: { *(.stack) }
+  .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }
   .stabstr 0		: { *(.stabstr) }

arch/arm/common/gic.c

@@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = cpumask_first(mask_val);
 	u32 val;
+	struct irq_desc *desc;
 
 	spin_lock(&irq_controller_lock);
-	irq_desc[irq].node = cpu;
+	desc = irq_to_desc(irq);
+	if (desc == NULL) {
+		spin_unlock(&irq_controller_lock);
+		return -EINVAL;
+	}
+	desc->node = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
@@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 			  unsigned int irq_start)
 {
-	unsigned int max_irq, i;
+	unsigned int gic_irqs, irq_limit, i;
 	u32 cpumask = 1 << smp_processor_id();
 
 	if (gic_nr >= MAX_GIC_NR)
@@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 
 	/*
 	 * Find out how many interrupts are supported.
-	 */
-	max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
-	max_irq = (max_irq + 1) * 32;
-
-	/*
 	 * The GIC only supports up to 1020 interrupt sources.
-	 * Limit this to either the architected maximum, or the
-	 * platform maximum.
 	 */
-	if (max_irq > max(1020, NR_IRQS))
+	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
-		max_irq = max(1020, NR_IRQS);
+	gic_irqs = (gic_irqs + 1) * 32;
+	if (gic_irqs > 1020)
+		gic_irqs = 1020;
 
 	/*
 	 * Set all global interrupts to be level triggered, active low.
 	 */
-	for (i = 32; i < max_irq; i += 16)
+	for (i = 32; i < gic_irqs; i += 16)
 		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
 
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
-	for (i = 32; i < max_irq; i += 4)
+	for (i = 32; i < gic_irqs; i += 4)
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
 	 * Set priority on all global interrupts.
 	 */
-	for (i = 32; i < max_irq; i += 4)
+	for (i = 32; i < gic_irqs; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
 	 * Disable all interrupts.  Leave the PPI and SGIs alone
 	 * as these enables are banked registers.
 	 */
-	for (i = 32; i < max_irq; i += 32)
+	for (i = 32; i < gic_irqs; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
+	/*
+	 * Limit number of interrupts registered to the platform maximum
+	 */
+	irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
+	if (WARN_ON(irq_limit > NR_IRQS))
+		irq_limit = NR_IRQS;
+
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+	for (i = irq_start; i < irq_limit; i++) {
 		set_irq_chip(i, &gic_chip);
 		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);

arch/arm/configs/at91rm9200_defconfig

@@ -0,0 +1,341 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y

arch/arm/configs/at91rm9200dk_defconfig

@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/at91rm9200ek_defconfig

@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/ateb9200_defconfig

@@ -1,131 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m

arch/arm/configs/carmeva_defconfig

@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y

arch/arm/configs/cpuat91_defconfig

@@ -1,112 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/arm/configs/csb337_defconfig

@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/csb637_defconfig

@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/ecbat91_defconfig

@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y

arch/arm/configs/kafa_defconfig

@@ -1,61 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y

arch/arm/configs/kb9202_defconfig

@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/arm/configs/onearm_defconfig

@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/picotux200_defconfig

@@ -1,242 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m

arch/arm/configs/yl9200_defconfig

@@ -1,137 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

arch/arm/include/asm/assembler.h

@@ -238,7 +238,7 @@
 	@ Slightly optimised to avoid incrementing the pointer twice
 	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
 	.if	\rept == 2
-	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
 	.endif
 
 	add\cond \ptr, #\rept * \inc

arch/arm/include/asm/mmu.h

@@ -13,6 +13,10 @@ typedef struct {
 
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID(mm)	((mm)->context.id & 255)
+
+/* init_mm.context.id_lock should be initialized. */
+#define INIT_MM_CONTEXT(name)                                                 \
+	.context.id_lock    = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
 #else
 #define ASID(mm)	(0)
 #endif

arch/arm/include/asm/pgtable.h

@@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
 
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end)	(end)
+
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.

arch/arm/kernel/entry-armv.S

@@ -911,7 +911,7 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 	 * A special ghost syscall is used for that (see traps.c).
 	 */
 	stmfd	sp!, {r7, lr}
-	ldr	r7, =1f			@ it's 20 bits
+	ldr	r7, 1f			@ it's 20 bits
 	swi	__ARM_NR_cmpxchg
 	ldmfd	sp!, {r7, pc}
 1:	.word	__ARM_NR_cmpxchg

arch/arm/kernel/head.S

@@ -85,9 +85,11 @@ ENTRY(stext)
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
+ THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_p			@ yes, error 'p'
 	bl	__lookup_machine_type		@ r5=machinfo
 	movs	r8, r5				@ invalid machine (r5=0)?
+ THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_a			@ yes, error 'a'
 	bl	__vet_atags
 #ifdef CONFIG_SMP_ON_UP
@@ -262,6 +264,7 @@ __create_page_tables:
 	mov	pc, lr
 ENDPROC(__create_page_tables)
 	.ltorg
+	.align
 __enable_mmu_loc:
 	.long	.
 	.long	__enable_mmu
@@ -282,6 +285,7 @@ ENTRY(secondary_startup)
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
 	moveq	r0, #'p'			@ yes, error 'p'
+ THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_p
 
 	/*
@@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)
 
+	.align
+
 	.type	__secondary_data, %object
 __secondary_data:
 	.long	.
@@ -413,6 +419,7 @@ __fixup_smp_on_up:
 	mov	pc, lr
 ENDPROC(__fixup_smp)
 
+	.align
 1:	.word	.
 	.word	__smpalt_begin
 	.word	__smpalt_end

arch/arm/kernel/relocate_kernel.S

@@ -59,6 +59,8 @@ relocate_new_kernel:
 	ldr r2,kexec_boot_atags
 	mov pc,lr
 
+	.align
+
 	.globl kexec_start_address
 kexec_start_address:
 	.long	0x0

arch/arm/lib/findbit.S

@@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
  */
 .L_found:
 #if __LINUX_ARM_ARCH__ >= 5
-		rsb	r1, r3, #0
+		rsb	r0, r3, #0
-		and	r3, r3, r1
+		and	r3, r3, r0
 		clz	r3, r3
 		rsb	r3, r3, #31
 		add	r0, r2, r3
@@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
+		cmp	r1, r0			@ Clamp to maxbit
+		movlo	r0, r1
 		mov	pc, lr
 

arch/arm/mach-aaec2000/include/mach/vmalloc.h

@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		0xd0000000
+#define VMALLOC_END		0xd0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-at91/Makefile

@@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
+obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o
 obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
 obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
 obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91rm9200_uart0_device;
-				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-				at91_uarts[i] = &at91rm9200_uart1_device;
-				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91rm9200_uart2_device;
-				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins(0);
-				at91_uarts[i] = &at91rm9200_uart3_device;
-				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91rm9200_dbgu_device;
-				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;

arch/arm/mach-at91/board-1arm.c

@@ -39,24 +39,24 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 },		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init onearm_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
-	/* Setup the serial ports and console */
+	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_init_serial(&onearm_uart_config);
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init onearm_init_irq(void)

arch/arm/mach-at91/board-kafa.c

@@ -39,17 +39,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init kafa_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
 
-	/* Setup the serial ports and console */
+	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_init_serial(&kafa_uart_config);
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init kafa_init_irq(void)

arch/arm/mach-at91/board-picotux200.c

@@ -43,24 +43,21 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init picotux200_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
-	/* Setup the serial ports and console */
+	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_init_serial(&picotux200_uart_config);
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			  | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init picotux200_init_irq(void)
@@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.ports		= 1,
 };
 
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// 	.vbus_pin	= AT91_PIN_PD4,
-// 	.pullup_pin	= AT91_PIN_PD5,
-// };
-
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
@@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.wp_pin		= AT91_PIN_PA17,
 };
 
-// static struct spi_board_info picotux200_spi_devices[] = {
-// 	{	/* DataFlash chip */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 0,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// 	{	/* DataFlash card */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 3,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #endif
-// };
-
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
 #define PICOTUX200_FLASH_SIZE	SZ_4M
 
@@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
 	at91_add_device_eth(&picotux200_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&picotux200_usbh_data);
-	/* USB Device */
-	// at91_add_device_udc(&picotux200_udc_data);
-	// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }

arch/arm/mach-at91/board-rm9200dk.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-dk.c
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 	// .vcc_pin	= ... always powered
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
 	.slot_b		= 0,
 	.wire4		= 1,
 };
+#endif
 
 static struct spi_board_info dk_spi_devices[] = {
 	{	/* DataFlash chip */

arch/arm/mach-at91/board-rm9200ek.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
 	.pullup_pin	= AT91_PIN_PD5,
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata ek_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
 	.wire4		= 1,
 	.wp_pin		= AT91_PIN_PA17,
 };
+#endif
 
 static struct spi_board_info ek_spi_devices[] = {
 	{	/* DataFlash chip */

arch/arm/mach-at91/board-yl-9200.c

@@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
  * EPSON S1D13806 FB (discontinued chip)
  * EPSON S1D13506 FB
  */
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
 

arch/arm/mach-at91/include/mach/board.h

@@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
 extern void __init at91_set_serial_console(unsigned portnr);
 
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
 extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 
 struct atmel_uart_data {
 	short			use_dma_tx;	/* use transmit DMA? */

arch/arm/mach-bcmring/include/mach/vmalloc.h

@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL

arch/arm/mach-clps711x/include/mach/vmalloc.h

@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL

arch/arm/mach-cns3xxx/pcie.c

@@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
 {
 	int i;
 
-	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
 			"imprecise external abort");
 
 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {

arch/arm/mach-davinci/dm355.c

@@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
-	CLK("davinci-asp.1", NULL, &asp1_clk),
+	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK("spi_davinci.0", NULL, &spi0_clk),
@@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = {
 };
 
 static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
 	.resource	= dm355_asp1_resources,

arch/arm/mach-davinci/dm365.c

@@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
 	CLK(NULL, NULL, NULL),
@@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = {
 };
 
 static struct platform_device dm365_asp_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
-	.id		= 0,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
 	.resource	= dm365_asp_resources,
 };

arch/arm/mach-davinci/dm644x.c

@@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("davinci-asp", NULL, &asp_clk),
+	CLK("davinci-mcbsp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = {
 };
 
 static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
 	.resource	= dm644x_asp_resources,

arch/arm/mach-ebsa110/include/mach/vmalloc.h

@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdf000000
+#define VMALLOC_END       0xdf000000UL

arch/arm/mach-footbridge/include/mach/vmalloc.h

@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL

arch/arm/mach-h720x/include/mach/vmalloc.h

@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
 
 #endif

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
 
 static void ads7846_dev_init(void)
@@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
-#endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
@@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
 	.chipselect	= eukrea_mbimx27_spi_cs,
 	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
-#endif
 
 static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	{

arch/arm/mach-integrator/include/mach/vmalloc.h

@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL

arch/arm/mach-msm/include/mach/vmalloc.h

@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  0xd0000000
+#define VMALLOC_END	  0xd0000000UL
 
 #endif
 

arch/arm/mach-mx25/devices-imx25.h

@@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
 #define imx25_add_spi_imx(id, pdata)	\
-	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)

arch/arm/mach-mx3/mach-pcm037_eet.c

@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
+#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
@@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
 };
 
 /* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
 static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
-#endif
 
 /* GPIO-keys input device */
 static struct gpio_keys_button pcm037_gpio_keys[] = {
@@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = {
 	},
 };
 
-static int eet_init_devices(void)
+static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
 		return 0;

arch/arm/mach-netx/include/mach/vmalloc.h

@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL

arch/arm/mach-omap1/include/mach/vmalloc.h

@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	0xd8000000
+#define VMALLOC_END	0xd8000000UL

arch/arm/mach-omap2/include/mach/vmalloc.h

@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  0xf8000000
+#define VMALLOC_END	  0xf8000000UL

arch/arm/mach-omap2/pm24xx.c

@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/console.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void)
 	if (omap_irq_pending())
 		goto no_sleep;
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (try_acquire_console_sem())
+		goto no_sleep;
+
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
 	omap_uart_prepare_idle(2);
@@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
+	release_console_sem();
+
 no_sleep:
 	if (omap2_pm_debug) {
 		unsigned long long tmp;

arch/arm/mach-omap2/pm34xx.c

@@ -28,6 +28,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/console.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -385,6 +386,12 @@ void omap_sram_idle(void)
 		omap3_enable_io_chain();
 	}
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (per_next_state < PWRDM_POWER_ON ||
+	    core_next_state < PWRDM_POWER_ON)
+		if (try_acquire_console_sem())
+			goto console_still_active;
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
@@ -463,6 +470,9 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
+	release_console_sem();
+
+console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||

arch/arm/mach-omap2/serial.c

@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/serial_8250.h>
 #include <linux/pm_runtime.h>
+#include <linux/console.h>
 
 #ifdef CONFIG_SERIAL_OMAP
 #include <plat/omap-serial.h>
@@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (num == uart->num) {
+		if (num == uart->num && uart->can_sleep) {
 			omap_uart_enable_clocks(uart);
 
 			/* Check for IO pad wakeup */
@@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
 
 	oh->dev_attr = uart;
 
+	acquire_console_sem(); /* in case the earlycon is on the UART */
+
 	/*
 	 * Because of early UART probing, UART did not get idled
 	 * on init.  Now that omap_device is ready, ensure full idle
@@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
+	release_console_sem();
+
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {
 		device_init_wakeup(&od->pdev.dev, true);

arch/arm/mach-pnx4008/include/mach/vmalloc.h

@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL

arch/arm/mach-realview/headsmp.S

@@ -35,5 +35,6 @@ pen:	ldr	r7, [r6]
 	 */
 	b	secondary_startup
 
+	.align
 1:	.long	.
 	.long	pen_release

arch/arm/mach-rpc/include/mach/vmalloc.h

@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdc000000
+#define VMALLOC_END       0xdc000000UL

arch/arm/mach-s3c2410/h1940-bluetooth.c

@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
 	/* Configures BT serial port GPIOs */
 	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,

arch/arm/mach-s3c2412/Kconfig

@@ -16,7 +16,7 @@ config CPU_S3C2412
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 

arch/arm/mach-s3c2416/Kconfig

@@ -35,9 +35,12 @@ menu "S3C2416 Machines"
 config MACH_SMDK2416
 	bool "SMDK2416"
 	select CPU_S3C2416
+	select MACH_SMDK
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416

arch/arm/mach-s3c2416/irq.c

@@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
 
 static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
 
 static void s3c2416_irq_uart3_mask(unsigned int irqno)
 {

arch/arm/mach-s3c2440/Kconfig

@@ -18,6 +18,7 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select S3C2410_PM if PM
@@ -178,6 +179,9 @@ config MACH_MINI2440
 	bool "MINI2440 development board"
 	select CPU_S3C2440
 	select EEPROM_AT24
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGER
 	select LEDS_TRIGGER_BACKLIGHT
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST

arch/arm/mach-s3c2440/s3c2440.c

@@ -46,9 +46,6 @@ int __init s3c2440_init(void)
 {
 	printk("S3C2440: Initialising architecture\n");
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
 	/* change irq for watchdog */
 
 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
@@ -58,3 +55,11 @@ int __init s3c2440_init(void)
 
 	return sysdev_register(&s3c2440_sysdev);
 }
+
+void __init s3c2440_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}

arch/arm/mach-s3c2440/s3c2442.c

@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -43,6 +44,11 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 
 /* S3C2442 extended clock support */
 
@@ -163,3 +169,11 @@ int __init s3c2442_init(void)
 
 	return sysdev_register(&s3c2442_sysdev);
 }
+
+void __init s3c2442_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}

arch/arm/mach-s3c2443/Kconfig

@@ -5,6 +5,7 @@
 config CPU_S3C2443
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC

arch/arm/mach-s3c2443/irq.c

@@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
 
 static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
 
 static void s3c2443_irq_uart3_mask(unsigned int irqno)
 {

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -45,7 +45,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -46,7 +46,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/i2c.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-shark/include/mach/vmalloc.h

@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL

arch/arm/mach-shmobile/board-ap4evb.c

@@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+	int ret = 0;
 
-static int fsi_set_rate(int is_porta, int rate)
+	if (rate <= 0)
+		return ret;
+
+	if (enable) {
+		ret = clk_set_rate(clk, rate);
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
+	}
+
+	return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
+
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
+
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
+
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
+
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
+
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
 	case 44100:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
+		fsib_rate	= rate * 256;
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
+		fdiv_rate	= rate * 256;
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
+		return -EINVAL;
-		break;
 	}
 
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
 	clk_put(fsib_clk);
+	if (ret < 0)
+		return ret;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		return ret;
+	}
+
+	return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
 
 	return ret;
 }
@@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@ static int __init hdmi_init_pm_clock(void)
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;

arch/arm/mach-shmobile/clock-sh7372.c

@@ -220,8 +220,7 @@ static void pllc2_disable(struct clk *clk)
 	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
 }
 
-static int pllc2_set_rate(struct clk *clk,
+static int pllc2_set_rate(struct clk *clk, unsigned long rate)
-			  unsigned long rate, int algo_id)
 {
 	unsigned long value;
 	int idx;
@@ -230,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk,
 	if (idx < 0)
 		return idx;
 
-	if (rate == clk->parent->rate) {
+	if (rate == clk->parent->rate)
-		pllc2_disable(clk);
+		return -EINVAL;
-		return 0;
-	}
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	if (value & 0x80000000)
-		pllc2_disable(clk);
-
 	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-	if (value & 0x80000000)
-		return pllc2_enable(clk);
-
 	return 0;
 }
 
@@ -453,32 +444,24 @@ static int fsidiv_enable(struct clk *clk)
 	unsigned long value;
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
+	if (value < 2)
-		fsidiv_disable(clk);
+		return -EIO;
-		return -ENOENT;
-	}
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
 	return 0;
 }
 
-static int fsidiv_set_rate(struct clk *clk,
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
-			   unsigned long rate, int algo_id)
 {
 	int idx;
 
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
-		return -ENOENT;
+		return -EINVAL;
 
 	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
+	return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
@@ -609,8 +592,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
 	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
 	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
 	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -647,8 +628,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */

arch/arm/mach-tegra/include/mach/debug-macro.S

@@ -21,8 +21,8 @@
 #include <mach/io.h>
 
 	.macro  addruart, rp, rv
-        ldreq   \rp, =IO_APB_PHYS       @ physical
+        ldr     \rp, =IO_APB_PHYS       @ physical
-        ldrne   \rv, =IO_APB_VIRT        @ virtual
+        ldr     \rv, =IO_APB_VIRT        @ virtual
 #if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
 #error "A debug UART must be selected in the kernel config to use DEBUG_LL"
 #elif defined(CONFIG_TEGRA_DEBUG_UARTA)

arch/arm/mach-ux500/cpu.c

@@ -75,14 +75,14 @@ void __init ux500_init_irq(void)
 static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void ux500_cache_sync(void)
 {
 	void __iomem *base = __io_address(UX500_L2CC_BASE);
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void)
 	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
 
 	/* invalidate all ways */
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	ux500_cache_sync();
 }

arch/arm/mach-versatile/include/mach/vmalloc.h

@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		0xd8000000
+#define VMALLOC_END		0xd8000000UL

arch/arm/mach-vexpress/headsmp.S

@@ -35,5 +35,6 @@ pen:	ldr	r7, [r6]
 	 */
 	b	secondary_startup
 
+	.align
 1:	.long	.
 	.long	pen_release

arch/arm/mm/ioremap.c

@@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	 */
 	if (pfn_valid(pfn)) {
 		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
-		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
-		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		       "will fail in the next kernel release.  Please fix your driver.\n");
 		WARN_ON(1);
 	}
 

arch/arm/mm/proc-v7.S

@@ -381,7 +381,7 @@ __v7_ca9mp_proc_info:
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	b	__v7_ca9mp_setup
+	W(b)	__v7_ca9mp_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
@@ -413,7 +413,7 @@ __v7_proc_info:
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	b	__v7_setup
+	W(b)	__v7_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS

arch/arm/plat-iop/time.c

@@ -18,6 +18,7 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
+#include <linux/sched.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
@@ -36,7 +37,7 @@
 /*
  * IOP clocksource (free-running timer 1).
  */
-static cycle_t iop_clocksource_read(struct clocksource *unused)
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
 {
 	return 0xffffffffu - read_tcr1();
 }

arch/arm/plat-mxc/devices/platform-imx-dma.c

@@ -12,15 +12,7 @@
 
 #include <mach/hardware.h>
 #include <mach/devices-common.h>
-#ifdef SDMA_IS_MERGED
 #include <mach/sdma.h>
-#else
-struct sdma_platform_data {
-	int sdma_version;
-	char *cpu_name;
-	int to_version;
-};
-#endif
 
 struct imx_imx_sdma_data {
 	resource_size_t iobase;

arch/arm/plat-mxc/devices/platform-spi_imx.c

@@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
 	imx21_cspi_data_entry(0, 1),
 	imx21_cspi_data_entry(1, 2),
+};
 #endif
 
 #ifdef CONFIG_ARCH_MX25

arch/arm/plat-nomadik/timer.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
@@ -16,11 +17,13 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
 
-void __iomem *mtu_base; /* ssigned by machine code */
+void __iomem *mtu_base; /* Assigned by machine code */
 
 /*
  * Kernel assumes that sched_clock can be called early
@@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = {
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
+ * better resolution when scheduling the kernel.
- * this wraps around for now, since it is just a relative time
+ *
- * stamp. (Inspired by OMAP implementation.)
+ * Because the hardware timer period may be quite short
+ * (32.3 secs on the 133 MHz MTU timer selection on ux500)
+ * and because cnt32_to_63() needs to be called at least once per
+ * half period to work properly, a kernel keepwarm() timer is set up
+ * to ensure this requirement is always met.
+ *
+ * Also the sched_clock timer will wrap around at some point,
+ * here we set it to run continously for a year.
  */
+#define SCHED_CLOCK_MIN_WRAP 3600*24*365
+static struct timer_list cnt32_to_63_keepwarm_timer;
+static u32 sched_mult;
+static u32 sched_shift;
+
 unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(nmdk_clksrc.read(
+	u64 cycles;
-				  &nmdk_clksrc),
+
-				  nmdk_clksrc.mult,
+	if (unlikely(!mtu_base))
-				  nmdk_clksrc.shift);
+		return 0;
+
+	cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0)));
+	/*
+	 * sched_mult is guaranteed to be even so will
+	 * shift out bit 63
+	 */
+	return (cycles * sched_mult) >> sched_shift;
+}
+
+/* Just kick sched_clock every so often */
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	(void) sched_clock();
+}
+
+/*
+ * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm
+ * once in half a 32bit timer wrap interval.
+ */
+static void __init nmdk_sched_clock_init(unsigned long rate)
+{
+	u32 v;
+	unsigned long delta;
+	u64 days;
+
+	/* Find the apropriate mult and shift factors */
+	clocks_calc_mult_shift(&sched_mult, &sched_shift,
+			       rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP);
+	/* We need to multiply by an even number to get rid of bit 63 */
+	if (sched_mult & 1)
+		sched_mult++;
+
+	/* Let's see what we get, take max counter and scale it */
+	days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift;
+	do_div(days, NSEC_PER_SEC);
+	do_div(days, (3600*24));
+
+	pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n",
+		(64 - sched_shift), rate, (unsigned long) days);
+
+	/*
+	 * Program a timer to kick us at half 32bit wraparound
+	 * Formula: seconds per wrap = (2^32) / f
+	 */
+	v = 0xFFFFFFFFUL / rate;
+	/* We want half of the wrap time to keep cnt32_to_63 warm */
+	v /= 2;
+	pr_debug("sched_clock: prescaled timer rate: %lu Hz, "
+		 "initialize keepwarm timer every %d seconds\n", rate, v);
+	/* Convert seconds to jiffies */
+	delta = msecs_to_jiffies(v*1000);
+	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta);
+	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta));
 }
 
 /* Clockevent device: use one-shot mode */
@@ -161,13 +230,15 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	/* Now the scheduling clock is ready */
+	/* Now the clock source is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
 	if (clocksource_register(&nmdk_clksrc))
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
+	nmdk_sched_clock_init(rate);
+
 	/* Timer 1 is used for events */
 
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);

arch/arm/plat-pxa/include/plat/sdhci.h

@@ -17,6 +17,9 @@
 /* Require clock free running */
 #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
 
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
 /*
  * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
  * @max_speed: the maximum speed supported