hwmon: applesmc: lighter wait mechanism, drastic improvement
The read fail ratio is sensitive to the delay between the first byte written and the first byte read; apparently the sensors cannot be rushed. Increasing the minimum wait time, without changing the total wait time, improves the fail ratio from a 8% chance that any of the sensors fails in one read, down to 0.4%, on a Macbook Air. On a Macbook Pro 3,1, the effect is even more apparent. By reducing the number of status polls, the ratio is further improved to below 0.1%. Finally, increasing the total wait time brings the fail ratio down to virtually zero. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Bob McElrath <bob@mcelrath.org> Cc: Nicolas Boichat <nicolas@boichat.ch> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
07e8dbd3eb
commit
8c9398d1e9
1 changed files with 12 additions and 10 deletions
|
@ -49,6 +49,9 @@
|
|||
|
||||
#define APPLESMC_MAX_DATA_LENGTH 32
|
||||
|
||||
#define APPLESMC_MIN_WAIT 0x0040
|
||||
#define APPLESMC_MAX_WAIT 0x8000
|
||||
|
||||
#define APPLESMC_STATUS_MASK 0x0f
|
||||
#define APPLESMC_READ_CMD 0x10
|
||||
#define APPLESMC_WRITE_CMD 0x11
|
||||
|
@ -172,25 +175,25 @@ static unsigned int key_at_index;
|
|||
static struct workqueue_struct *applesmc_led_wq;
|
||||
|
||||
/*
|
||||
* __wait_status - Wait up to 10ms for the status port to get a certain value
|
||||
* __wait_status - Wait up to 32ms for the status port to get a certain value
|
||||
* (masked with 0x0f), returning zero if the value is obtained. Callers must
|
||||
* hold applesmc_lock.
|
||||
*/
|
||||
static int __wait_status(u8 val)
|
||||
{
|
||||
unsigned int i;
|
||||
int us;
|
||||
|
||||
val = val & APPLESMC_STATUS_MASK;
|
||||
|
||||
for (i = 0; i < 1000; i++) {
|
||||
for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
|
||||
udelay(us);
|
||||
if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val) {
|
||||
if (debug)
|
||||
printk(KERN_DEBUG
|
||||
"Waited %d us for status %x\n",
|
||||
i*10, val);
|
||||
"Waited %d us for status %x\n",
|
||||
2 * us - APPLESMC_MIN_WAIT, val);
|
||||
return 0;
|
||||
}
|
||||
udelay(10);
|
||||
}
|
||||
|
||||
printk(KERN_WARNING "applesmc: wait status failed: %x != %x\n",
|
||||
|
@ -206,13 +209,12 @@ static int __wait_status(u8 val)
|
|||
*/
|
||||
static int send_command(u8 cmd)
|
||||
{
|
||||
int i;
|
||||
for (i = 0; i < 1000; i++) {
|
||||
int us;
|
||||
for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
|
||||
outb(cmd, APPLESMC_CMD_PORT);
|
||||
udelay(5);
|
||||
udelay(us);
|
||||
if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == 0x0c)
|
||||
return 0;
|
||||
udelay(5);
|
||||
}
|
||||
printk(KERN_WARNING "applesmc: command failed: %x -> %x\n",
|
||||
cmd, inb(APPLESMC_CMD_PORT));
|
||||
|
|
Loading…
Reference in a new issue