[media] em28xx: Better support for the Terratec Cinergy HTC USB XS

This intializes the card just like the windows driver does

- the "HTC USB XS HD" uses the same firmware as the "HTC Stick HD";
- both have different GPIO and reg init sequences;

Tested only with DVB-C.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Martin Blumenstingl 2012-10-04 14:22:54 -03:00 committed by Mauro Carvalho Chehab
parent 74df06daf6
commit 890401364d
3 changed files with 94 additions and 4 deletions

View file

@ -1979,6 +1979,15 @@ struct em28xx_board em28xx_boards[] = {
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
.name = "Terratec Cinergy HTC USB XS",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
.i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@ -2057,9 +2066,9 @@ struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0x0ccd, 0x0043),
.driver_info = EM2870_BOARD_TERRATEC_XS },
{ USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
{ USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
{ USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */

View file

@ -331,7 +331,7 @@ static struct drxk_config hauppauge_930c_drxk = {
.load_firmware_sync = true,
};
struct drxk_config terratec_htc_stick_drxk = {
static struct drxk_config terratec_htc_stick_drxk = {
.adr = 0x29,
.single_master = 1,
.no_i2c_bridge = 1,
@ -520,7 +520,10 @@ static void terratec_htc_stick_init(struct em28xx *dev)
{ -1, -1, -1, -1},
};
/* Init the analog decoder? */
/*
* Init the analog decoder (not yet supported), but
* it's probably still a good idea.
*/
struct {
unsigned char r[4];
int len;
@ -547,6 +550,64 @@ static void terratec_htc_stick_init(struct em28xx *dev)
em28xx_gpio_set(dev, terratec_htc_stick_end);
};
static void terratec_htc_usb_xs_init(struct em28xx *dev)
{
int i;
struct em28xx_reg_seq terratec_htc_usb_xs_init[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xb2, 0xff, 100},
{EM2874_R80_GPIO, 0xb2, 0xff, 50},
{EM2874_R80_GPIO, 0xb6, 0xff, 100},
{ -1, -1, -1, -1},
};
struct em28xx_reg_seq terratec_htc_usb_xs_end[] = {
{EM2874_R80_GPIO, 0xa6, 0xff, 100},
{EM2874_R80_GPIO, 0xa6, 0xff, 50},
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{ -1, -1, -1, -1},
};
/*
* Init the analog decoder (not yet supported), but
* it's probably still a good idea.
*/
struct {
unsigned char r[4];
int len;
} regs[] = {
{{ 0x06, 0x02, 0x00, 0x31 }, 4},
{{ 0x01, 0x02 }, 2},
{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0xff, 0xaf }, 4},
{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
{{ 0x01, 0x00 }, 2},
{{ 0x01, 0x00, 0x73, 0xaf }, 4},
{{ 0x04, 0x00 }, 2},
{{ 0x00, 0x04 }, 2},
{{ 0x00, 0x04, 0x00, 0x0a }, 4},
{{ 0x04, 0x14 }, 2},
{{ 0x04, 0x14, 0x00, 0x00 }, 4},
};
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
em28xx_gpio_set(dev, terratec_htc_usb_xs_init);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
msleep(10);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44);
msleep(10);
dev->i2c_client.addr = 0x82 >> 1;
for (i = 0; i < ARRAY_SIZE(regs); i++)
i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
em28xx_gpio_set(dev, terratec_htc_usb_xs_end);
};
static void pctv_520e_init(struct em28xx *dev)
{
/*
@ -1147,6 +1208,25 @@ static int em28xx_dvb_init(struct em28xx *dev)
goto out_free;
}
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap,
&em28xx_cxd2820r_tda18271_config)) {
result = -EINVAL;
goto out_free;
}
break;
case EM2884_BOARD_TERRATEC_HTC_USB_XS:
terratec_htc_usb_xs_init(dev);
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk,
&dev->i2c_adap);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap,

View file

@ -128,6 +128,7 @@
#define EM2874_BOARD_MAXMEDIA_UB425_TC 84
#define EM2884_BOARD_PCTV_510E 85
#define EM2884_BOARD_PCTV_520E 86
#define EM2884_BOARD_TERRATEC_HTC_USB_XS 87
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4