[PPC] Remove mpc885ads and mpc86x ads boards from arch/ppc
We have a board port in arch/powerpc so we dont need this one anymore. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala
parent
546be91915
commit
87c448c2f2
10 changed files with 0 additions and 1951 deletions
|
|
@ -946,29 +946,6 @@ static int __init scc_enet_init(void)
|
|||
*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MPC885ADS
|
||||
|
||||
/* Deassert PHY reset and enable the PHY.
|
||||
*/
|
||||
{
|
||||
volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE);
|
||||
uint tmp;
|
||||
|
||||
tmp = in_be32(bcsr + 1 /* BCSR1 */);
|
||||
tmp |= BCSR1_ETHEN;
|
||||
out_be32(bcsr + 1, tmp);
|
||||
tmp = in_be32(bcsr + 4 /* BCSR4 */);
|
||||
tmp |= BCSR4_ETH10_RST;
|
||||
out_be32(bcsr + 4, tmp);
|
||||
iounmap(bcsr);
|
||||
}
|
||||
|
||||
/* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode
|
||||
* upon reset. SCC is set to half duplex by default. So this
|
||||
* inconsistency should be better fixed by the software.
|
||||
*/
|
||||
#endif
|
||||
|
||||
dev->base_addr = (unsigned long)ep;
|
||||
#if 0
|
||||
dev->name = "CPM_ENET";
|
||||
|
|
|
|||
|
|
@ -372,22 +372,6 @@ config MPC8XXFADS
|
|||
bool "FADS"
|
||||
select FADS
|
||||
|
||||
config MPC86XADS
|
||||
bool "MPC86XADS"
|
||||
help
|
||||
MPC86x Application Development System by Freescale Semiconductor.
|
||||
The MPC86xADS is meant to serve as a platform for s/w and h/w
|
||||
development around the MPC86X processor families.
|
||||
select FADS
|
||||
|
||||
config MPC885ADS
|
||||
bool "MPC885ADS"
|
||||
help
|
||||
Freescale Semiconductor MPC885 Application Development System (ADS).
|
||||
Also known as DUET.
|
||||
The MPC885ADS is meant to serve as a platform for s/w and h/w
|
||||
development around the MPC885 processor family.
|
||||
|
||||
config TQM823L
|
||||
bool "TQM823L"
|
||||
help
|
||||
|
|
@ -479,53 +463,6 @@ config WINCEPT
|
|||
|
||||
endchoice
|
||||
|
||||
menu "Freescale Ethernet driver platform-specific options"
|
||||
depends on FS_ENET
|
||||
|
||||
config MPC8xx_SECOND_ETH
|
||||
bool "Second Ethernet channel"
|
||||
depends on (MPC885ADS || MPC86XADS)
|
||||
default y
|
||||
help
|
||||
This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
|
||||
The latter will use SCC1, for 885ADS you can select it below.
|
||||
|
||||
choice
|
||||
prompt "Second Ethernet channel"
|
||||
depends on MPC8xx_SECOND_ETH
|
||||
default MPC8xx_SECOND_ETH_FEC2
|
||||
|
||||
config MPC8xx_SECOND_ETH_FEC2
|
||||
bool "FEC2"
|
||||
depends on MPC885ADS
|
||||
help
|
||||
Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
|
||||
(often 2-nd UART) will not work if this is enabled.
|
||||
|
||||
config MPC8xx_SECOND_ETH_SCC1
|
||||
bool "SCC1"
|
||||
depends on MPC86XADS
|
||||
select MPC8xx_SCC_ENET_FIXED
|
||||
help
|
||||
Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
|
||||
(often 1-nd UART) will not work if this is enabled.
|
||||
|
||||
config MPC8xx_SECOND_ETH_SCC3
|
||||
bool "SCC3"
|
||||
depends on MPC885ADS
|
||||
help
|
||||
Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
|
||||
(often 1-nd UART) will not work if this is enabled.
|
||||
|
||||
endchoice
|
||||
|
||||
config MPC8xx_SCC_ENET_FIXED
|
||||
depends on MPC8xx_SECOND_ETH_SCC
|
||||
default n
|
||||
bool "Use fixed MII-less mode for SCC Ethernet"
|
||||
|
||||
endmenu
|
||||
|
||||
choice
|
||||
prompt "Machine Type"
|
||||
depends on 6xx
|
||||
|
|
|
|||
|
|
@ -1,633 +0,0 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.12-rc4
|
||||
# Tue Jun 14 13:36:35 2005
|
||||
#
|
||||
CONFIG_MMU=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_HAVE_DEC_LOCK=y
|
||||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_CLEAN_COMPILE is not set
|
||||
CONFIG_BROKEN=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
# CONFIG_BASE_FULL is not set
|
||||
CONFIG_FUTEX=y
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
# CONFIG_SHMEM is not set
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=1
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
# CONFIG_MODULE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
# CONFIG_KMOD is not set
|
||||
|
||||
#
|
||||
# Processor
|
||||
#
|
||||
# CONFIG_6xx is not set
|
||||
# CONFIG_40x is not set
|
||||
# CONFIG_44x is not set
|
||||
# CONFIG_POWER3 is not set
|
||||
# CONFIG_POWER4 is not set
|
||||
CONFIG_8xx=y
|
||||
# CONFIG_E500 is not set
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
CONFIG_EMBEDDEDBOOT=y
|
||||
# CONFIG_PM is not set
|
||||
CONFIG_NOT_COHERENT_CACHE=y
|
||||
|
||||
#
|
||||
# Platform options
|
||||
#
|
||||
CONFIG_FADS=y
|
||||
# CONFIG_RPXLITE is not set
|
||||
# CONFIG_RPXCLASSIC is not set
|
||||
# CONFIG_BSEIP is not set
|
||||
# CONFIG_MPC8XXFADS is not set
|
||||
CONFIG_MPC86XADS=y
|
||||
# CONFIG_TQM823L is not set
|
||||
# CONFIG_TQM850L is not set
|
||||
# CONFIG_TQM855L is not set
|
||||
# CONFIG_TQM860L is not set
|
||||
# CONFIG_FPS850L is not set
|
||||
# CONFIG_SPD823TS is not set
|
||||
# CONFIG_IVMS8 is not set
|
||||
# CONFIG_IVML24 is not set
|
||||
# CONFIG_SM850 is not set
|
||||
# CONFIG_HERMES_PRO is not set
|
||||
# CONFIG_IP860 is not set
|
||||
# CONFIG_LWMON is not set
|
||||
# CONFIG_PCU_E is not set
|
||||
# CONFIG_CCM is not set
|
||||
# CONFIG_LANTEC is not set
|
||||
# CONFIG_MBX is not set
|
||||
# CONFIG_WINCEPT is not set
|
||||
# CONFIG_SMP is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_HIGHMEM is not set
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
# Bus options
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_PCI_DOMAINS is not set
|
||||
# CONFIG_PCI_QSPAN is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Advanced setup
|
||||
#
|
||||
# CONFIG_ADVANCED_OPTIONS is not set
|
||||
|
||||
#
|
||||
# Default settings for advanced configuration options are used
|
||||
#
|
||||
CONFIG_HIGHMEM_START=0xfe000000
|
||||
CONFIG_LOWMEM_SIZE=0x30000000
|
||||
CONFIG_KERNEL_START=0xc0000000
|
||||
CONFIG_TASK_SIZE=0x80000000
|
||||
CONFIG_CONSISTENT_START=0xff100000
|
||||
CONFIG_CONSISTENT_SIZE=0x00200000
|
||||
CONFIG_BOOT_LOAD=0x00400000
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
# CONFIG_STANDALONE is not set
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Macintosh device drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
CONFIG_IPV6=m
|
||||
# CONFIG_IPV6_PRIVACY is not set
|
||||
# CONFIG_INET6_AH is not set
|
||||
# CONFIG_INET6_ESP is not set
|
||||
# CONFIG_INET6_IPCOMP is not set
|
||||
# CONFIG_INET6_TUNNEL is not set
|
||||
# CONFIG_IPV6_TUNNEL is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_MII is not set
|
||||
# CONFIG_OAKNET is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_SERIAL_CPM=y
|
||||
CONFIG_SERIAL_CPM_CONSOLE=y
|
||||
# CONFIG_SERIAL_CPM_SCC1 is not set
|
||||
# CONFIG_SERIAL_CPM_SCC2 is not set
|
||||
# CONFIG_SERIAL_CPM_SCC3 is not set
|
||||
# CONFIG_SERIAL_CPM_SCC4 is not set
|
||||
CONFIG_SERIAL_CPM_SMC1=y
|
||||
# CONFIG_SERIAL_CPM_SMC2 is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_AGP is not set
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
# CONFIG_EXT2_FS is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_SYSFS=y
|
||||
# CONFIG_DEVFS_FS is not set
|
||||
# CONFIG_DEVPTS_FS_XATTR is not set
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLBFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V4=y
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_SUNRPC=y
|
||||
CONFIG_SUNRPC_GSS=y
|
||||
CONFIG_RPCSEC_GSS_KRB5=y
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# MPC8xx CPM Options
|
||||
#
|
||||
CONFIG_SCC_ENET=y
|
||||
CONFIG_SCC1_ENET=y
|
||||
# CONFIG_SCC2_ENET is not set
|
||||
# CONFIG_SCC3_ENET is not set
|
||||
# CONFIG_FEC_ENET is not set
|
||||
# CONFIG_ENET_BIG_BUFFERS is not set
|
||||
|
||||
#
|
||||
# Generic MPC8xx Options
|
||||
#
|
||||
# CONFIG_8xx_COPYBACK is not set
|
||||
# CONFIG_8xx_CPU6 is not set
|
||||
CONFIG_NO_UCODE_PATCH=y
|
||||
# CONFIG_USB_SOF_UCODE_PATCH is not set
|
||||
# CONFIG_I2C_SPI_UCODE_PATCH is not set
|
||||
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC32 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
CONFIG_CRYPTO=y
|
||||
# CONFIG_CRYPTO_HMAC is not set
|
||||
# CONFIG_CRYPTO_NULL is not set
|
||||
# CONFIG_CRYPTO_MD4 is not set
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
# CONFIG_CRYPTO_SHA1 is not set
|
||||
# CONFIG_CRYPTO_SHA256 is not set
|
||||
# CONFIG_CRYPTO_SHA512 is not set
|
||||
# CONFIG_CRYPTO_WP512 is not set
|
||||
# CONFIG_CRYPTO_TGR192 is not set
|
||||
CONFIG_CRYPTO_DES=y
|
||||
# CONFIG_CRYPTO_BLOWFISH is not set
|
||||
# CONFIG_CRYPTO_TWOFISH is not set
|
||||
# CONFIG_CRYPTO_SERPENT is not set
|
||||
# CONFIG_CRYPTO_AES is not set
|
||||
# CONFIG_CRYPTO_CAST5 is not set
|
||||
# CONFIG_CRYPTO_CAST6 is not set
|
||||
# CONFIG_CRYPTO_TEA is not set
|
||||
# CONFIG_CRYPTO_ARC4 is not set
|
||||
# CONFIG_CRYPTO_KHAZAD is not set
|
||||
# CONFIG_CRYPTO_ANUBIS is not set
|
||||
# CONFIG_CRYPTO_DEFLATE is not set
|
||||
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
||||
# CONFIG_CRYPTO_CRC32C is not set
|
||||
# CONFIG_CRYPTO_TEST is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
|
@ -1,622 +0,0 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.12-rc6
|
||||
# Thu Jun 9 21:17:29 2005
|
||||
#
|
||||
CONFIG_MMU=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_HAVE_DEC_LOCK=y
|
||||
CONFIG_PPC=y
|
||||
CONFIG_PPC32=y
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_CLEAN_COMPILE is not set
|
||||
CONFIG_BROKEN=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
# CONFIG_MODULES is not set
|
||||
|
||||
#
|
||||
# Processor
|
||||
#
|
||||
# CONFIG_6xx is not set
|
||||
# CONFIG_40x is not set
|
||||
# CONFIG_44x is not set
|
||||
# CONFIG_POWER3 is not set
|
||||
# CONFIG_POWER4 is not set
|
||||
CONFIG_8xx=y
|
||||
# CONFIG_E500 is not set
|
||||
# CONFIG_MATH_EMULATION is not set
|
||||
# CONFIG_CPU_FREQ is not set
|
||||
CONFIG_EMBEDDEDBOOT=y
|
||||
# CONFIG_PM is not set
|
||||
CONFIG_NOT_COHERENT_CACHE=y
|
||||
|
||||
#
|
||||
# Platform options
|
||||
#
|
||||
# CONFIG_RPXLITE is not set
|
||||
# CONFIG_RPXCLASSIC is not set
|
||||
# CONFIG_BSEIP is not set
|
||||
# CONFIG_FADS is not set
|
||||
CONFIG_MPC885ADS=y
|
||||
# CONFIG_TQM823L is not set
|
||||
# CONFIG_TQM850L is not set
|
||||
# CONFIG_TQM855L is not set
|
||||
# CONFIG_TQM860L is not set
|
||||
# CONFIG_FPS850L is not set
|
||||
# CONFIG_SPD823TS is not set
|
||||
# CONFIG_IVMS8 is not set
|
||||
# CONFIG_IVML24 is not set
|
||||
# CONFIG_SM850 is not set
|
||||
# CONFIG_HERMES_PRO is not set
|
||||
# CONFIG_IP860 is not set
|
||||
# CONFIG_LWMON is not set
|
||||
# CONFIG_PCU_E is not set
|
||||
# CONFIG_CCM is not set
|
||||
# CONFIG_LANTEC is not set
|
||||
# CONFIG_MBX is not set
|
||||
# CONFIG_WINCEPT is not set
|
||||
# CONFIG_SMP is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_HIGHMEM is not set
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
CONFIG_ISA_DMA_API=y
|
||||
|
||||
#
|
||||
# Bus options
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_PCI_DOMAINS is not set
|
||||
# CONFIG_PCI_QSPAN is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Advanced setup
|
||||
#
|
||||
# CONFIG_ADVANCED_OPTIONS is not set
|
||||
|
||||
#
|
||||
# Default settings for advanced configuration options are used
|
||||
#
|
||||
CONFIG_HIGHMEM_START=0xfe000000
|
||||
CONFIG_LOWMEM_SIZE=0x30000000
|
||||
CONFIG_KERNEL_START=0xc0000000
|
||||
CONFIG_TASK_SIZE=0x80000000
|
||||
CONFIG_CONSISTENT_START=0xff100000
|
||||
CONFIG_CONSISTENT_SIZE=0x00200000
|
||||
CONFIG_BOOT_LOAD=0x00400000
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Macintosh device drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_OAKNET is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
CONFIG_PPP=y
|
||||
# CONFIG_PPP_MULTILINK is not set
|
||||
# CONFIG_PPP_FILTER is not set
|
||||
CONFIG_PPP_ASYNC=y
|
||||
CONFIG_PPP_SYNC_TTY=y
|
||||
CONFIG_PPP_DEFLATE=y
|
||||
# CONFIG_PPP_BSDCOMP is not set
|
||||
# CONFIG_PPPOE is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_SERIAL_CPM=y
|
||||
CONFIG_SERIAL_CPM_CONSOLE=y
|
||||
# CONFIG_SERIAL_CPM_SCC1 is not set
|
||||
# CONFIG_SERIAL_CPM_SCC2 is not set
|
||||
# CONFIG_SERIAL_CPM_SCC3 is not set
|
||||
# CONFIG_SERIAL_CPM_SCC4 is not set
|
||||
CONFIG_SERIAL_CPM_SMC1=y
|
||||
CONFIG_SERIAL_CPM_SMC2=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_AGP is not set
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
# CONFIG_PROC_KCORE is not set
|
||||
CONFIG_SYSFS=y
|
||||
# CONFIG_DEVFS_FS is not set
|
||||
# CONFIG_DEVPTS_FS_XATTR is not set
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLBFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
# CONFIG_NFS_V3 is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
# CONFIG_ACORN_PARTITION is not set
|
||||
# CONFIG_OSF_PARTITION is not set
|
||||
# CONFIG_AMIGA_PARTITION is not set
|
||||
# CONFIG_ATARI_PARTITION is not set
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_BSD_DISKLABEL is not set
|
||||
# CONFIG_MINIX_SUBPARTITION is not set
|
||||
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||
# CONFIG_LDM_PARTITION is not set
|
||||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# MPC8xx CPM Options
|
||||
#
|
||||
CONFIG_SCC_ENET=y
|
||||
# CONFIG_SCC1_ENET is not set
|
||||
# CONFIG_SCC2_ENET is not set
|
||||
CONFIG_SCC3_ENET=y
|
||||
# CONFIG_FEC_ENET is not set
|
||||
# CONFIG_ENET_BIG_BUFFERS is not set
|
||||
|
||||
#
|
||||
# Generic MPC8xx Options
|
||||
#
|
||||
CONFIG_8xx_COPYBACK=y
|
||||
CONFIG_8xx_CPU6=y
|
||||
CONFIG_NO_UCODE_PATCH=y
|
||||
# CONFIG_USB_SOF_UCODE_PATCH is not set
|
||||
# CONFIG_I2C_SPI_UCODE_PATCH is not set
|
||||
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_CRC_CCITT=y
|
||||
# CONFIG_CRC32 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
|
@ -23,5 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o
|
|||
obj-$(CONFIG_SPRUCE) += spruce.o
|
||||
obj-$(CONFIG_LITE5200) += lite5200.o
|
||||
obj-$(CONFIG_EV64360) += ev64360.o
|
||||
obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
|
||||
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
|
||||
|
|
|
|||
|
|
@ -22,29 +22,6 @@
|
|||
|
||||
#include <asm/ppcboot.h>
|
||||
|
||||
#if defined(CONFIG_MPC86XADS)
|
||||
|
||||
#define BOARD_CHIP_NAME "MPC86X"
|
||||
|
||||
/* U-Boot maps BCSR to 0xff080000 */
|
||||
#define BCSR_ADDR ((uint)0xff080000)
|
||||
|
||||
/* MPC86XADS has one more CPLD and an additional BCSR.
|
||||
*/
|
||||
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
|
||||
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
|
||||
|
||||
#define BCSR5_T1_RST 0x10
|
||||
#define BCSR5_ATM155_RST 0x08
|
||||
#define BCSR5_ATM25_RST 0x04
|
||||
#define BCSR5_MII1_EN 0x02
|
||||
#define BCSR5_MII1_RST 0x01
|
||||
|
||||
/* There is no PHY link change interrupt */
|
||||
#define PHY_INTERRUPT (-1)
|
||||
|
||||
#else /* FADS */
|
||||
|
||||
/* Memory map is configured by the PROM startup.
|
||||
* I tried to follow the FADS manual, although the startup PROM
|
||||
* dictates this and we simply have to move some of the physical
|
||||
|
|
@ -55,8 +32,6 @@
|
|||
/* PHY link change interrupt */
|
||||
#define PHY_INTERRUPT SIU_IRQ2
|
||||
|
||||
#endif /* CONFIG_MPC86XADS */
|
||||
|
||||
#define BCSR_SIZE ((uint)(64 * 1024))
|
||||
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
|
||||
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
|
||||
|
|
|
|||
|
|
@ -1,93 +0,0 @@
|
|||
/*
|
||||
* A collection of structures, addresses, and values associated with
|
||||
* the Freescale MPC885ADS board.
|
||||
* Copied from the FADS stuff.
|
||||
*
|
||||
* Author: MontaVista Software, Inc.
|
||||
* source@mvista.com
|
||||
*
|
||||
* 2005 (c) MontaVista Software, Inc. This file is licensed under the
|
||||
* terms of the GNU General Public License version 2. This program is licensed
|
||||
* "as is" without any warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#ifndef __ASM_MPC885ADS_H__
|
||||
#define __ASM_MPC885ADS_H__
|
||||
|
||||
|
||||
#include <asm/ppcboot.h>
|
||||
|
||||
/* U-Boot maps BCSR to 0xff080000 */
|
||||
#define BCSR_ADDR ((uint)0xff080000)
|
||||
#define BCSR_SIZE ((uint)32)
|
||||
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
|
||||
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
|
||||
#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
|
||||
#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
|
||||
#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
|
||||
|
||||
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
|
||||
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
|
||||
|
||||
#define IMAP_ADDR ((uint)0xff000000)
|
||||
#define IMAP_SIZE ((uint)(64 * 1024))
|
||||
|
||||
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
|
||||
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
|
||||
|
||||
/* Bits of interest in the BCSRs.
|
||||
*/
|
||||
#define BCSR1_ETHEN ((uint)0x20000000)
|
||||
#define BCSR1_IRDAEN ((uint)0x10000000)
|
||||
#define BCSR1_RS232EN_1 ((uint)0x01000000)
|
||||
#define BCSR1_PCCEN ((uint)0x00800000)
|
||||
#define BCSR1_PCCVCC0 ((uint)0x00400000)
|
||||
#define BCSR1_PCCVPP0 ((uint)0x00200000)
|
||||
#define BCSR1_PCCVPP1 ((uint)0x00100000)
|
||||
#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
|
||||
#define BCSR1_RS232EN_2 ((uint)0x00040000)
|
||||
#define BCSR1_PCCVCC1 ((uint)0x00010000)
|
||||
#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
|
||||
|
||||
#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
|
||||
#define BCSR4_USB_LO_SPD ((uint)0x04000000)
|
||||
#define BCSR4_USB_VCC ((uint)0x02000000)
|
||||
#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
|
||||
#define BCSR4_USB_EN ((uint)0x00020000)
|
||||
|
||||
#define BCSR5_MII2_EN 0x40
|
||||
#define BCSR5_MII2_RST 0x20
|
||||
#define BCSR5_T1_RST 0x10
|
||||
#define BCSR5_ATM155_RST 0x08
|
||||
#define BCSR5_ATM25_RST 0x04
|
||||
#define BCSR5_MII1_EN 0x02
|
||||
#define BCSR5_MII1_RST 0x01
|
||||
|
||||
/* Interrupt level assignments */
|
||||
#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
|
||||
#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
|
||||
#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
|
||||
#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
|
||||
|
||||
/* We don't use the 8259 */
|
||||
#define NR_8259_INTS 0
|
||||
|
||||
/* CPM Ethernet through SCC3 */
|
||||
#define PA_ENET_RXD ((ushort)0x0040)
|
||||
#define PA_ENET_TXD ((ushort)0x0080)
|
||||
#define PE_ENET_TCLK ((uint)0x00004000)
|
||||
#define PE_ENET_RCLK ((uint)0x00008000)
|
||||
#define PE_ENET_TENA ((uint)0x00000010)
|
||||
#define PC_ENET_CLSN ((ushort)0x0400)
|
||||
#define PC_ENET_RENA ((ushort)0x0800)
|
||||
|
||||
/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
|
||||
* SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
|
||||
#define SICR_ENET_MASK ((uint)0x00ff0000)
|
||||
#define SICR_ENET_CLKRT ((uint)0x002c0000)
|
||||
|
||||
#define BOARD_CHIP_NAME "MPC885"
|
||||
|
||||
#endif /* __ASM_MPC885ADS_H__ */
|
||||
#endif /* __KERNEL__ */
|
||||
|
|
@ -1,476 +0,0 @@
|
|||
/*arch/ppc/platforms/mpc885ads_setup.c
|
||||
*
|
||||
* Platform setup for the Freescale mpc885ads board
|
||||
*
|
||||
* Vitaly Bordug <vbordug@ru.mvista.com>
|
||||
*
|
||||
* Copyright 2005 MontaVista Software Inc.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/param.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
#include <linux/fs_enet_pd.h>
|
||||
#include <linux/fs_uart_pd.h>
|
||||
#include <linux/mii.h>
|
||||
|
||||
#include <asm/delay.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/ppcboot.h>
|
||||
#include <asm/8xx_immap.h>
|
||||
#include <asm/cpm1.h>
|
||||
#include <asm/ppc_sys.h>
|
||||
|
||||
extern unsigned char __res[];
|
||||
static void setup_smc1_ioports(struct fs_uart_platform_info*);
|
||||
static void setup_smc2_ioports(struct fs_uart_platform_info*);
|
||||
|
||||
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
|
||||
static void setup_fec1_ioports(struct fs_platform_info*);
|
||||
static void setup_fec2_ioports(struct fs_platform_info*);
|
||||
static void setup_scc3_ioports(struct fs_platform_info*);
|
||||
|
||||
static struct fs_uart_platform_info mpc885_uart_pdata[] = {
|
||||
[fsid_smc1_uart] = {
|
||||
.brg = 1,
|
||||
.fs_no = fsid_smc1_uart,
|
||||
.init_ioports = setup_smc1_ioports,
|
||||
.tx_num_fifo = 4,
|
||||
.tx_buf_size = 32,
|
||||
.rx_num_fifo = 4,
|
||||
.rx_buf_size = 32,
|
||||
},
|
||||
[fsid_smc2_uart] = {
|
||||
.brg = 2,
|
||||
.fs_no = fsid_smc2_uart,
|
||||
.init_ioports = setup_smc2_ioports,
|
||||
.tx_num_fifo = 4,
|
||||
.tx_buf_size = 32,
|
||||
.rx_num_fifo = 4,
|
||||
.rx_buf_size = 32,
|
||||
},
|
||||
};
|
||||
|
||||
static struct fs_platform_info mpc8xx_enet_pdata[] = {
|
||||
[fsid_fec1] = {
|
||||
.rx_ring = 128,
|
||||
.tx_ring = 16,
|
||||
.rx_copybreak = 240,
|
||||
|
||||
.use_napi = 1,
|
||||
.napi_weight = 17,
|
||||
|
||||
.init_ioports = setup_fec1_ioports,
|
||||
|
||||
.bus_id = "0:00",
|
||||
.has_phy = 1,
|
||||
},
|
||||
[fsid_fec2] = {
|
||||
.rx_ring = 128,
|
||||
.tx_ring = 16,
|
||||
.rx_copybreak = 240,
|
||||
|
||||
.use_napi = 1,
|
||||
.napi_weight = 17,
|
||||
|
||||
.init_ioports = setup_fec2_ioports,
|
||||
|
||||
.bus_id = "0:01",
|
||||
.has_phy = 1,
|
||||
},
|
||||
[fsid_scc3] = {
|
||||
.rx_ring = 64,
|
||||
.tx_ring = 8,
|
||||
.rx_copybreak = 240,
|
||||
|
||||
.use_napi = 1,
|
||||
.napi_weight = 17,
|
||||
|
||||
.init_ioports = setup_scc3_ioports,
|
||||
#ifdef CONFIG_FIXED_MII_10_FDX
|
||||
.bus_id = "fixed@100:1",
|
||||
#else
|
||||
.bus_id = "0:02",
|
||||
#endif
|
||||
},
|
||||
};
|
||||
|
||||
void __init board_init(void)
|
||||
{
|
||||
cpm8xx_t *cp = cpmp;
|
||||
unsigned int *bcsr_io;
|
||||
|
||||
#ifdef CONFIG_FS_ENET
|
||||
immap_t *immap = (immap_t *) IMAP_ADDR;
|
||||
#endif
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR\n");
|
||||
return;
|
||||
}
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC1
|
||||
cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
|
||||
clrbits32(bcsr_io, BCSR1_RS232EN_1);
|
||||
cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
|
||||
cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
||||
#else
|
||||
setbits32(bcsr_io,BCSR1_RS232EN_1);
|
||||
cp->cp_smc[0].smc_smcmr = 0;
|
||||
cp->cp_smc[0].smc_smce = 0;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC2
|
||||
cp->cp_simode &= ~(0xe0000000 >> 1);
|
||||
cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
|
||||
clrbits32(bcsr_io,BCSR1_RS232EN_2);
|
||||
cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
|
||||
cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
||||
#else
|
||||
setbits32(bcsr_io,BCSR1_RS232EN_2);
|
||||
cp->cp_smc[1].smc_smcmr = 0;
|
||||
cp->cp_smc[1].smc_smce = 0;
|
||||
#endif
|
||||
iounmap(bcsr_io);
|
||||
|
||||
#ifdef CONFIG_FS_ENET
|
||||
/* use MDC for MII (common) */
|
||||
setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
|
||||
clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
|
||||
bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
|
||||
clrbits32(bcsr_io,BCSR5_MII1_EN);
|
||||
clrbits32(bcsr_io,BCSR5_MII1_RST);
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
||||
clrbits32(bcsr_io,BCSR5_MII2_EN);
|
||||
clrbits32(bcsr_io,BCSR5_MII2_RST);
|
||||
#endif
|
||||
iounmap(bcsr_io);
|
||||
#endif
|
||||
}
|
||||
|
||||
static void setup_fec1_ioports(struct fs_platform_info* pdata)
|
||||
{
|
||||
immap_t *immap = (immap_t *) IMAP_ADDR;
|
||||
|
||||
/* configure FEC1 pins */
|
||||
setbits16(&immap->im_ioport.iop_papar, 0xf830);
|
||||
setbits16(&immap->im_ioport.iop_padir, 0x0830);
|
||||
clrbits16(&immap->im_ioport.iop_padir, 0xf000);
|
||||
setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);
|
||||
|
||||
clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
|
||||
setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
|
||||
clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
|
||||
setbits32(&immap->im_cpm.cp_pepar, 0x00000003);
|
||||
|
||||
setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
|
||||
clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
|
||||
clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
|
||||
}
|
||||
|
||||
static void setup_fec2_ioports(struct fs_platform_info* pdata)
|
||||
{
|
||||
immap_t *immap = (immap_t *) IMAP_ADDR;
|
||||
|
||||
/* configure FEC2 pins */
|
||||
setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
|
||||
setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
|
||||
clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
|
||||
setbits32(&immap->im_cpm.cp_peso, 0x00037800);
|
||||
clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
|
||||
}
|
||||
|
||||
static void setup_scc3_ioports(struct fs_platform_info* pdata)
|
||||
{
|
||||
immap_t *immap = (immap_t *) IMAP_ADDR;
|
||||
unsigned *bcsr_io;
|
||||
|
||||
bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/* Enable the PHY.
|
||||
*/
|
||||
clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
|
||||
udelay(1000);
|
||||
setbits32(bcsr_io+4, BCSR4_ETH10_RST);
|
||||
/* Configure port A pins for Txd and Rxd.
|
||||
*/
|
||||
setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
|
||||
clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
|
||||
|
||||
/* Configure port C pins to enable CLSN and RENA.
|
||||
*/
|
||||
clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
|
||||
clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
|
||||
setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
|
||||
|
||||
/* Configure port E for TCLK and RCLK.
|
||||
*/
|
||||
setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
|
||||
clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
|
||||
clrbits32(&immap->im_cpm.cp_pedir,
|
||||
PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
|
||||
clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
|
||||
setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
|
||||
|
||||
/* Configure Serial Interface clock routing.
|
||||
* First, clear all SCC bits to zero, then set the ones we want.
|
||||
*/
|
||||
clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
|
||||
setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
|
||||
|
||||
/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
|
||||
*/
|
||||
immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
|
||||
/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
|
||||
* by H/W setting after reset. SCC ethernet controller support only half duplex.
|
||||
* This discrepancy of modes causes a lot of carrier lost errors.
|
||||
*/
|
||||
|
||||
/* In the original SCC enet driver the following code is placed at
|
||||
the end of the initialization */
|
||||
setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
|
||||
clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
|
||||
setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
|
||||
|
||||
setbits32(bcsr_io+4, BCSR1_ETHEN);
|
||||
iounmap(bcsr_io);
|
||||
}
|
||||
|
||||
static int mac_count = 0;
|
||||
|
||||
static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
|
||||
{
|
||||
struct fs_platform_info *fpi;
|
||||
bd_t *bd = (bd_t *) __res;
|
||||
char *e;
|
||||
int i;
|
||||
|
||||
if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
|
||||
printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
|
||||
return;
|
||||
}
|
||||
|
||||
fpi = &mpc8xx_enet_pdata[fs_no];
|
||||
|
||||
switch (fs_no) {
|
||||
case fsid_fec1:
|
||||
fpi->init_ioports = &setup_fec1_ioports;
|
||||
break;
|
||||
case fsid_fec2:
|
||||
fpi->init_ioports = &setup_fec2_ioports;
|
||||
break;
|
||||
case fsid_scc3:
|
||||
fpi->init_ioports = &setup_scc3_ioports;
|
||||
break;
|
||||
default:
|
||||
printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
|
||||
return;
|
||||
}
|
||||
|
||||
pdev->dev.platform_data = fpi;
|
||||
fpi->fs_no = fs_no;
|
||||
|
||||
e = (unsigned char *)&bd->bi_enetaddr;
|
||||
for (i = 0; i < 6; i++)
|
||||
fpi->macaddr[i] = *e++;
|
||||
|
||||
fpi->macaddr[5] += mac_count++;
|
||||
|
||||
}
|
||||
|
||||
static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
|
||||
int idx)
|
||||
{
|
||||
/* This is for FEC devices only */
|
||||
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
|
||||
return;
|
||||
mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
|
||||
}
|
||||
|
||||
static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
|
||||
int idx)
|
||||
{
|
||||
/* This is for SCC devices only */
|
||||
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
|
||||
return;
|
||||
|
||||
mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
|
||||
}
|
||||
|
||||
static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
|
||||
{
|
||||
immap_t *immap = (immap_t *) IMAP_ADDR;
|
||||
unsigned *bcsr_io;
|
||||
unsigned int iobits = 0x000000c0;
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR1\n");
|
||||
return;
|
||||
}
|
||||
clrbits32(bcsr_io,BCSR1_RS232EN_1);
|
||||
iounmap(bcsr_io);
|
||||
|
||||
setbits32(&immap->im_cpm.cp_pbpar, iobits);
|
||||
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
|
||||
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
|
||||
}
|
||||
|
||||
static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
|
||||
{
|
||||
immap_t *immap = (immap_t *) IMAP_ADDR;
|
||||
unsigned *bcsr_io;
|
||||
unsigned int iobits = 0x00000c00;
|
||||
|
||||
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
||||
|
||||
if (bcsr_io == NULL) {
|
||||
printk(KERN_CRIT "Could not remap BCSR1\n");
|
||||
return;
|
||||
}
|
||||
clrbits32(bcsr_io,BCSR1_RS232EN_2);
|
||||
iounmap(bcsr_io);
|
||||
|
||||
#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
|
||||
setbits32(&immap->im_cpm.cp_pbpar, iobits);
|
||||
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
|
||||
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
|
||||
#else
|
||||
setbits16(&immap->im_ioport.iop_papar, iobits);
|
||||
clrbits16(&immap->im_ioport.iop_padir, iobits);
|
||||
clrbits16(&immap->im_ioport.iop_paodr, iobits);
|
||||
#endif
|
||||
}
|
||||
|
||||
static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
|
||||
int idx)
|
||||
{
|
||||
bd_t *bd = (bd_t *) __res;
|
||||
struct fs_uart_platform_info *pinfo;
|
||||
int num = ARRAY_SIZE(mpc885_uart_pdata);
|
||||
|
||||
int id = fs_uart_id_smc2fsid(idx);
|
||||
|
||||
/* no need to alter anything if console */
|
||||
if ((id < num) && (!pdev->dev.platform_data)) {
|
||||
pinfo = &mpc885_uart_pdata[id];
|
||||
pinfo->uart_clk = bd->bi_intfreq;
|
||||
pdev->dev.platform_data = pinfo;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static int mpc885ads_platform_notify(struct device *dev)
|
||||
{
|
||||
|
||||
static const struct platform_notify_dev_map dev_map[] = {
|
||||
{
|
||||
.bus_id = "fsl-cpm-fec",
|
||||
.rtn = mpc885ads_fixup_fec_enet_pdata,
|
||||
},
|
||||
{
|
||||
.bus_id = "fsl-cpm-scc",
|
||||
.rtn = mpc885ads_fixup_scc_enet_pdata,
|
||||
},
|
||||
{
|
||||
.bus_id = "fsl-cpm-smc:uart",
|
||||
.rtn = mpc885ads_fixup_uart_pdata
|
||||
},
|
||||
{
|
||||
.bus_id = NULL
|
||||
}
|
||||
};
|
||||
|
||||
platform_notify_map(dev_map,dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int __init mpc885ads_init(void)
|
||||
{
|
||||
struct fs_mii_fec_platform_info* fmpi;
|
||||
bd_t *bd = (bd_t *) __res;
|
||||
|
||||
printk(KERN_NOTICE "mpc885ads: Init\n");
|
||||
|
||||
platform_notify = mpc885ads_platform_notify;
|
||||
|
||||
ppc_sys_device_initfunc();
|
||||
ppc_sys_device_disable_all();
|
||||
|
||||
ppc_sys_device_enable(MPC8xx_CPM_FEC1);
|
||||
|
||||
ppc_sys_device_enable(MPC8xx_MDIO_FEC);
|
||||
fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
|
||||
&mpc8xx_mdio_fec_pdata;
|
||||
|
||||
fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
|
||||
|
||||
/* No PHY interrupt line here */
|
||||
fmpi->irq[0xf] = SIU_IRQ7;
|
||||
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
|
||||
ppc_sys_device_enable(MPC8xx_CPM_SCC3);
|
||||
|
||||
#endif
|
||||
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
||||
ppc_sys_device_enable(MPC8xx_CPM_FEC2);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC1
|
||||
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
|
||||
ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SERIAL_CPM_SMC2
|
||||
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
|
||||
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(mpc885ads_init);
|
||||
|
||||
/*
|
||||
To prevent confusion, console selection is gross:
|
||||
by 0 assumed SMC1 and by 1 assumed SMC2
|
||||
*/
|
||||
struct platform_device* early_uart_get_pdev(int index)
|
||||
{
|
||||
bd_t *bd = (bd_t *) __res;
|
||||
struct fs_uart_platform_info *pinfo;
|
||||
|
||||
struct platform_device* pdev = NULL;
|
||||
if(index) { /*assume SMC2 here*/
|
||||
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
|
||||
pinfo = &mpc885_uart_pdata[1];
|
||||
} else { /*over SMC1*/
|
||||
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
|
||||
pinfo = &mpc885_uart_pdata[0];
|
||||
}
|
||||
|
||||
pinfo->uart_clk = bd->bi_intfreq;
|
||||
pdev->dev.platform_data = pinfo;
|
||||
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
|
|
@ -141,16 +141,6 @@ m8xx_setup_arch(void)
|
|||
}
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS)
|
||||
#if defined(CONFIG_MTD_PHYSMAP)
|
||||
physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize,
|
||||
MPC8xxADS_BANK_WIDTH, NULL);
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num);
|
||||
#endif /* CONFIG_MTD_PARTITIONS */
|
||||
#endif /* CONFIG_MTD_PHYSMAP */
|
||||
#endif
|
||||
|
||||
board_init();
|
||||
|
|
|
|||
|
|
@ -63,10 +63,6 @@
|
|||
#include <platforms/lantec.h>
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MPC885ADS)
|
||||
#include <platforms/mpc885ads.h>
|
||||
#endif
|
||||
|
||||
/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
|
||||
* use the same memory map.
|
||||
*/
|
||||
|
|
|
|||
Loading…
Reference in a new issue