Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev

* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
  pata_of_platform: Don't use NO_IRQ
  [libata] ahci: Add ASMedia ASM1061 support
  [libata] Issue SRST to Sil3726 PMP
  sata_sis.c: trivial spelling fix
  ahci_platform: use dev_get_platdata()
  [libata] libata-scsi.c: Add function parameter documentation

drivers/ata/ahci.c

@@ -390,6 +390,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
 
+	/* Asmedia */
+	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1061 */
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },

drivers/ata/ahci_platform.c

@@ -65,7 +65,7 @@ static struct scsi_host_template ahci_platform_sht = {
 static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev->platform_data;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct ata_port_info pi = ahci_port_info[id->driver_data];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
@@ -191,7 +191,7 @@ static int __init ahci_probe(struct platform_device *pdev)
 static int __devexit ahci_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct ahci_platform_data *pdata = dev->platform_data;
+	struct ahci_platform_data *pdata = dev_get_platdata(dev);
 	struct ata_host *host = dev_get_drvdata(dev);
 
 	ata_host_detach(host);

drivers/ata/libata-eh.c

@@ -2883,7 +2883,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	    sata_scr_read(link, SCR_STATUS, &sstatus))
 		rc = -ERESTART;
 
-	if (rc == -ERESTART || try >= max_tries) {
+	if (try >= max_tries) {
 		/*
 		 * Thaw host port even if reset failed, so that the port
 		 * can be retried on the next phy event.  This risks
@@ -2909,6 +2909,16 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		ata_eh_acquire(ap);
 	}
 
+	/*
+	 * While disks spinup behind PMP, some controllers fail sending SRST.
+	 * They need to be reset - as well as the PMP - before retrying.
+	 */
+	if (rc == -ERESTART) {
+		if (ata_is_host_link(link))
+			ata_eh_thaw_port(ap);
+		goto out;
+	}
+
 	if (try == max_tries - 1) {
 		sata_down_spd_limit(link, 0);
 		if (slave)

drivers/ata/libata-pmp.c

@@ -389,12 +389,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
 
-			/* Class code report is unreliable and SRST
+			/* Class code report is unreliable. */
-			 * times out under certain configurations.
-			 */
 			if (link->pmp < 5)
-				link->flags |= ATA_LFLAG_NO_SRST |
+				link->flags |= ATA_LFLAG_ASSUME_ATA;
-					       ATA_LFLAG_ASSUME_ATA;
 
 			/* port 5 is for SEMB device and it doesn't like SRST */
 			if (link->pmp == 5)

drivers/ata/libata-scsi.c

@@ -1217,6 +1217,10 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
 
 /**
  *	__ata_change_queue_depth - helper for ata_scsi_change_queue_depth
+ *	@ap: ATA port to which the device change the queue depth
+ *	@sdev: SCSI device to configure queue depth for
+ *	@queue_depth: new queue depth
+ *	@reason: calling context
  *
  *	libsas and libata have different approaches for associating a sdev to
  *	its ata_port.

drivers/ata/pata_of_platform.c

@@ -52,7 +52,7 @@ static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
 	}
 
 	ret = of_irq_to_resource(dn, 0, &irq_res);
-	if (ret == NO_IRQ)
+	if (!ret)
 		irq_res.start = irq_res.end = 0;
 	else
 		irq_res.flags = 0;

drivers/ata/sata_sis.c

@@ -104,7 +104,7 @@ static const struct ata_port_info sis_port_info = {
 };
 
 MODULE_AUTHOR("Uwe Koziolek");
-MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
+MODULE_DESCRIPTION("low-level driver for Silicon Integrated Systems SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 MODULE_VERSION(DRV_VERSION);

include/linux/pci_ids.h

@@ -2405,6 +2405,8 @@
 
 #define PCI_VENDOR_ID_AZWAVE		0x1a3b
 
+#define PCI_VENDOR_ID_ASMEDIA		0x1b21
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29