r8169: remove non-napi code

It will almost unavoidably cause some breakage but it
is long overdue.

The driver identification string has been updated, a
lost tabulation and some unused code have been removed.
Otherwise the code paths should stay the same.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
This commit is contained in:
Francois Romieu 2008-05-11 14:51:00 +02:00 committed by Francois Romieu
parent 1087f4f4af
commit 865c652d6b
2 changed files with 41 additions and 114 deletions

View file

@ -2122,27 +2122,13 @@ config R8169
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
config R8169_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on R8169 && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
If in doubt, say N.
config R8169_VLAN
bool "VLAN support"
depends on R8169 && VLAN_8021Q
---help---
Say Y here for the r8169 driver to support the functions required
by the kernel 802.1Q code.
If in doubt, say Y.
config SB1250_MAC

View file

@ -28,13 +28,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#ifdef CONFIG_R8169_NAPI
#define NAPI_SUFFIX "-NAPI"
#else
#define NAPI_SUFFIX ""
#endif
#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX
#define RTL8169_VERSION "2.3LK-NAPI"
#define MODULENAME "r8169"
#define PFX MODULENAME ": "
@ -57,16 +51,6 @@
#define TX_BUFFS_AVAIL(tp) \
(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
#ifdef CONFIG_R8169_NAPI
#define rtl8169_rx_skb netif_receive_skb
#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb
#define rtl8169_rx_quota(count, quota) min(count, quota)
#else
#define rtl8169_rx_skb netif_rx
#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx
#define rtl8169_rx_quota(count, quota) count
#endif
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
static const int max_interrupt_work = 20;
@ -394,9 +378,7 @@ struct rtl8169_private {
void __iomem *mmio_addr; /* memory map physical address */
struct pci_dev *pci_dev; /* Index of PCI device */
struct net_device *dev;
#ifdef CONFIG_R8169_NAPI
struct napi_struct napi;
#endif
spinlock_t lock; /* spin lock flag */
u32 msg_enable;
int chipset;
@ -458,10 +440,7 @@ static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
static void rtl8169_down(struct net_device *dev);
static void rtl8169_rx_clear(struct rtl8169_private *tp);
#ifdef CONFIG_R8169_NAPI
static int rtl8169_poll(struct napi_struct *napi, int budget);
#endif
static const unsigned int rtl8169_rx_config =
(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
@ -843,10 +822,11 @@ static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
struct sk_buff *skb)
{
u32 opts2 = le32_to_cpu(desc->opts2);
struct vlan_group *vlgrp = tp->vlgrp;
int ret;
if (tp->vlgrp && (opts2 & RxVlanTag)) {
rtl8169_rx_hwaccel_skb(skb, tp->vlgrp, swab16(opts2 & 0xffff));
if (vlgrp && (opts2 & RxVlanTag)) {
vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
ret = 0;
} else
ret = -1;
@ -1764,9 +1744,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->change_mtu = rtl8169_change_mtu;
dev->set_mac_address = rtl_set_mac_address;
#ifdef CONFIG_R8169_NAPI
netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
#endif
#ifdef CONFIG_R8169_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
@ -1887,9 +1865,7 @@ static int rtl8169_open(struct net_device *dev)
if (retval < 0)
goto err_release_ring_2;
#ifdef CONFIG_R8169_NAPI
napi_enable(&tp->napi);
#endif
rtl_hw_start(dev);
@ -2197,9 +2173,7 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
if (ret < 0)
goto out;
#ifdef CONFIG_R8169_NAPI
napi_enable(&tp->napi);
#endif
rtl_hw_start(dev);
@ -2391,17 +2365,13 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev)
synchronize_irq(dev->irq);
/* Wait for any pending NAPI task to complete */
#ifdef CONFIG_R8169_NAPI
napi_disable(&tp->napi);
#endif
rtl8169_irq_mask_and_ack(ioaddr);
#ifdef CONFIG_R8169_NAPI
tp->intr_mask = 0xffff;
RTL_W16(IntrMask, tp->intr_event);
napi_enable(&tp->napi);
#endif
}
static void rtl8169_reinit_task(struct work_struct *work)
@ -2767,7 +2737,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
rx_left = rtl8169_rx_quota(rx_left, budget);
rx_left = min(rx_left, budget);
for (; rx_left > 0; rx_left--, cur_rx++) {
unsigned int entry = cur_rx % NUM_RX_DESC;
@ -2829,7 +2799,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
skb->protocol = eth_type_trans(skb, dev);
if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
rtl8169_rx_skb(skb);
netif_receive_skb(skb);
dev->last_rx = jiffies;
dev->stats.rx_bytes += pkt_size;
@ -2869,87 +2839,61 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
{
struct net_device *dev = dev_instance;
struct rtl8169_private *tp = netdev_priv(dev);
int boguscnt = max_interrupt_work;
void __iomem *ioaddr = tp->mmio_addr;
int status;
int handled = 0;
int status;
do {
status = RTL_R16(IntrStatus);
status = RTL_R16(IntrStatus);
/* hotplug/major error/no more work/shared irq */
if ((status == 0xFFFF) || !status)
break;
/* hotplug/major error/no more work/shared irq */
if ((status == 0xffff) || !status)
goto out;
handled = 1;
handled = 1;
if (unlikely(!netif_running(dev))) {
rtl8169_asic_down(ioaddr);
goto out;
}
if (unlikely(!netif_running(dev))) {
rtl8169_asic_down(ioaddr);
goto out;
}
status &= tp->intr_mask;
RTL_W16(IntrStatus,
(status & RxFIFOOver) ? (status | RxOverflow) : status);
status &= tp->intr_mask;
RTL_W16(IntrStatus,
(status & RxFIFOOver) ? (status | RxOverflow) : status);
if (!(status & tp->intr_event))
break;
if (!(status & tp->intr_event))
goto out;
/* Work around for rx fifo overflow */
if (unlikely(status & RxFIFOOver) &&
(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
netif_stop_queue(dev);
rtl8169_tx_timeout(dev);
break;
}
/* Work around for rx fifo overflow */
if (unlikely(status & RxFIFOOver) &&
(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
netif_stop_queue(dev);
rtl8169_tx_timeout(dev);
goto out;
}
if (unlikely(status & SYSErr)) {
rtl8169_pcierr_interrupt(dev);
break;
}
if (unlikely(status & SYSErr)) {
rtl8169_pcierr_interrupt(dev);
goto out;
}
if (status & LinkChg)
rtl8169_check_link_status(dev, tp, ioaddr);
if (status & LinkChg)
rtl8169_check_link_status(dev, tp, ioaddr);
#ifdef CONFIG_R8169_NAPI
if (status & tp->napi_event) {
RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
tp->intr_mask = ~tp->napi_event;
if (status & tp->napi_event) {
RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
tp->intr_mask = ~tp->napi_event;
if (likely(netif_rx_schedule_prep(dev, &tp->napi)))
__netif_rx_schedule(dev, &tp->napi);
else if (netif_msg_intr(tp)) {
printk(KERN_INFO "%s: interrupt %04x in poll\n",
dev->name, status);
}
else if (netif_msg_intr(tp)) {
printk(KERN_INFO "%s: interrupt %04x in poll\n",
dev->name, status);
}
break;
#else
/* Rx interrupt */
if (status & (RxOK | RxOverflow | RxFIFOOver))
rtl8169_rx_interrupt(dev, tp, ioaddr, ~(u32)0);
/* Tx interrupt */
if (status & (TxOK | TxErr))
rtl8169_tx_interrupt(dev, tp, ioaddr);
#endif
boguscnt--;
} while (boguscnt > 0);
if (boguscnt <= 0) {
if (netif_msg_intr(tp) && net_ratelimit() ) {
printk(KERN_WARNING
"%s: Too much work at interrupt!\n", dev->name);
}
/* Clear all interrupt sources. */
RTL_W16(IntrStatus, 0xffff);
}
out:
return IRQ_RETVAL(handled);
}
#ifdef CONFIG_R8169_NAPI
static int rtl8169_poll(struct napi_struct *napi, int budget)
{
struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi);
@ -2975,7 +2919,6 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
return work_done;
}
#endif
static void rtl8169_down(struct net_device *dev)
{
@ -2987,9 +2930,7 @@ static void rtl8169_down(struct net_device *dev)
netif_stop_queue(dev);
#ifdef CONFIG_R8169_NAPI
napi_disable(&tp->napi);
#endif
core_down:
spin_lock_irq(&tp->lock);