hwmon: (pmbus) Add support for Analog Devices ADM1275

Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power
Monitor

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
This commit is contained in:
Guenter Roeck 2011-03-17 13:16:01 -07:00
parent 0c0a061516
commit 83f7649c52
4 changed files with 192 additions and 0 deletions

View file

@ -0,0 +1,60 @@
Kernel driver adm1275
=====================
Supported chips:
* Analog Devices ADM1275
Prefix: 'adm1275'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
This driver supports hardware montoring for Analog Devices ADM1275 Hot-Swap
Controller and Digital Power Monitor.
The ADM1275 is a hot-swap controller that allows a circuit board to be removed
from or inserted into a live backplane. It also features current and voltage
readback via an integrated 12-bit analog-to-digital converter (ADC), accessed
using a PMBus. interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
Platform data support
---------------------
The driver supports standard PMBus driver platform data. Please see
Documentation/hwmon/pmbus for details.
Sysfs entries
-------------
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
in1_label "vin1" or "vout1" depending on chip variant and
configuration.
in1_input Measured voltage. From READ_VOUT register.
in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
curr1_label "iout1"
curr1_input Measured current. From READ_IOUT register.
curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register.

View file

@ -827,6 +827,16 @@ config SENSORS_PMBUS
This driver can also be built as a module. If so, the module will
be called pmbus.
config SENSORS_ADM1275
tristate "Analog Devices ADM1275"
default n
help
If you say yes here you get hardware monitoring support for Analog
Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
This driver can also be built as a module. If so, the module will
be called adm1275.
config SENSORS_MAX16064
tristate "Maxim MAX16064"
default n

View file

@ -120,6 +120,7 @@ obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
# PMBus drivers
obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o

121
drivers/hwmon/adm1275.c Normal file
View file

@ -0,0 +1,121 @@
/*
* Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller
* and Digital Power Monitor
*
* Copyright (c) 2011 Ericsson AB.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include "pmbus.h"
#define ADM1275_PMON_CONFIG 0xd4
#define ADM1275_VIN_VOUT_SELECT (1 << 6)
#define ADM1275_VRANGE (1 << 5)
static int adm1275_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int config;
struct pmbus_driver_info *info;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA))
return -ENODEV;
info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
if (config < 0)
return config;
info->pages = 1;
info->direct[PSC_VOLTAGE_IN] = true;
info->direct[PSC_VOLTAGE_OUT] = true;
info->direct[PSC_CURRENT_OUT] = true;
info->m[PSC_CURRENT_OUT] = 800;
info->b[PSC_CURRENT_OUT] = 20475;
info->R[PSC_CURRENT_OUT] = -1;
info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
if (config & ADM1275_VRANGE) {
info->m[PSC_VOLTAGE_IN] = 19045;
info->b[PSC_VOLTAGE_IN] = 0;
info->R[PSC_VOLTAGE_IN] = -2;
info->m[PSC_VOLTAGE_OUT] = 19045;
info->b[PSC_VOLTAGE_OUT] = 0;
info->R[PSC_VOLTAGE_OUT] = -2;
} else {
info->m[PSC_VOLTAGE_IN] = 6666;
info->b[PSC_VOLTAGE_IN] = 0;
info->R[PSC_VOLTAGE_IN] = -1;
info->m[PSC_VOLTAGE_OUT] = 6666;
info->b[PSC_VOLTAGE_OUT] = 0;
info->R[PSC_VOLTAGE_OUT] = -1;
}
if (config & ADM1275_VIN_VOUT_SELECT)
info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
else
info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
return pmbus_do_probe(client, id, info);
}
static int adm1275_remove(struct i2c_client *client)
{
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
int ret;
ret = pmbus_do_remove(client);
kfree(info);
return ret;
}
static const struct i2c_device_id adm1275_id[] = {
{"adm1275", 0},
{ }
};
MODULE_DEVICE_TABLE(i2c, adm1275_id);
static struct i2c_driver adm1275_driver = {
.driver = {
.name = "adm1275",
},
.probe = adm1275_probe,
.remove = adm1275_remove,
.id_table = adm1275_id,
};
static int __init adm1275_init(void)
{
return i2c_add_driver(&adm1275_driver);
}
static void __exit adm1275_exit(void)
{
i2c_del_driver(&adm1275_driver);
}
MODULE_AUTHOR("Guenter Roeck");
MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275");
MODULE_LICENSE("GPL");
module_init(adm1275_init);
module_exit(adm1275_exit);