hwmon: lis3: Short explanations of platform data fields
Short documentation at kernel doc format. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
This commit is contained in:
parent
029756d0b8
commit
83af1bd81f
1 changed files with 46 additions and 0 deletions
|
@ -1,6 +1,52 @@
|
|||
#ifndef __LIS3LV02D_H_
|
||||
#define __LIS3LV02D_H_
|
||||
|
||||
/**
|
||||
* struct lis3lv02d_platform_data - lis3 chip family platform data
|
||||
* @click_flags: Click detection unit configuration
|
||||
* @click_thresh_x: Click detection unit x axis threshold
|
||||
* @click_thresh_y: Click detection unit y axis threshold
|
||||
* @click_thresh_z: Click detection unit z axis threshold
|
||||
* @click_time_limit: Click detection unit time parameter
|
||||
* @click_latency: Click detection unit latency parameter
|
||||
* @click_window: Click detection unit window parameter
|
||||
* @irq_cfg: On chip irq source and type configuration (click /
|
||||
* data available / wake up, open drain, polarity)
|
||||
* @irq_flags1: Additional irq triggering flags for irq channel 0
|
||||
* @irq_flags2: Additional irq triggering flags for irq channel 1
|
||||
* @duration1: Wake up unit 1 duration parameter
|
||||
* @duration2: Wake up unit 2 duration parameter
|
||||
* @wakeup_flags: Wake up unit 1 flags
|
||||
* @wakeup_thresh: Wake up unit 1 threshold value
|
||||
* @wakeup_flags2: Wake up unit 2 flags
|
||||
* @wakeup_thresh2: Wake up unit 2 threshold value
|
||||
* @hipass_ctrl: High pass filter control (enable / disable, cut off
|
||||
* frequency)
|
||||
* @axis_x: Sensor orientation remapping for x-axis
|
||||
* @axis_y: Sensor orientation remapping for y-axis
|
||||
* @axis_z: Sensor orientation remapping for z-axis
|
||||
* @driver_features: Enable bits for different features. Disabled by default
|
||||
* @default_rate: Default sampling rate. 0 means reset default
|
||||
* @setup_resources: Interrupt line setup call back function
|
||||
* @release_resources: Interrupt line release call back function
|
||||
* @st_min_limits[3]: Selftest acceptance minimum values
|
||||
* @st_max_limits[3]: Selftest acceptance maximum values
|
||||
* @irq2: Irq line 2 number
|
||||
*
|
||||
* Platform data is used to setup the sensor chip. Meaning of the different
|
||||
* chip features can be found from the data sheet. It is publicly available
|
||||
* at www.st.com web pages. Currently the platform data is used
|
||||
* only for the 8 bit device. The 8 bit device has two wake up / free fall
|
||||
* detection units and click detection unit. There are plenty of ways to
|
||||
* configure the chip which makes is quite hard to explain deeper meaning of
|
||||
* the fields here. Behaviour of the detection blocks varies heavily depending
|
||||
* on the configuration. For example, interrupt detection block can use high
|
||||
* pass filtered data which makes it react to the changes in the acceleration.
|
||||
* Irq_flags can be used to enable interrupt detection on the both edges.
|
||||
* With proper chip configuration this produces interrupt when some trigger
|
||||
* starts and when it goes away.
|
||||
*/
|
||||
|
||||
struct lis3lv02d_platform_data {
|
||||
/* please note: the 'click' feature is only supported for
|
||||
* LIS[32]02DL variants of the chip and will be ignored for
|
||||
|
|
Loading…
Reference in a new issue