Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'for_3.3/uart/runtime-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into uart

Browse source 
Conflicts:
	arch/arm/mach-omap2/pm34xx.c
This commit is contained in:
Tony Lindgren 2011-12-16 14:01:03 -08:00
commit 7f760f1abc
33 changed files with 873 additions and 1112 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
arch/arm/mach-omap2/Kconfig
View file

@ -76,8 +76,13 @@ config SOC_OMAP3430
default y
select ARCH_OMAP_OTG
config SOC_OMAPTI816X
bool "TI816X support"
config SOC_OMAPTI81XX
bool "TI81XX support"
depends on ARCH_OMAP3
default y
config SOC_OMAPAM33XX
bool "AM33XX support"
depends on ARCH_OMAP3
default y
@ -314,7 +319,7 @@ config MACH_OMAP_3630SDP
config MACH_TI8168EVM
bool "TI8168 Evaluation Module"
depends on SOC_OMAPTI816X
depends on SOC_OMAPTI81XX
default y
config MACH_OMAP_4430SDP

100
arch/arm/mach-omap2/board-3430sdp.c
View file

@ -475,106 +475,8 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial1_pads[] __initdata = {
/*
* Note that off output enable is an active low
* signal. So setting this means pin is a
* input enabled in off mode
*/
OMAP_MUX_STATIC("uart1_cts.uart1_cts",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart1_rts.uart1_rts",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart1_rx.uart1_rx",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart1_tx.uart1_tx",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLDOWN |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT |
OMAP_PIN_OFF_INPUT_PULLDOWN |
OMAP_OFFOUT_EN |
OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT |
OMAP_OFF_EN |
OMAP_MUX_MODE0),
};
static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static inline void board_serial_init(void)
{
omap_serial_init_port(&serial1_data);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
/*
@ -711,7 +613,7 @@ static void __init omap_3430sdp_init(void)
else
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
omap_serial_init();
omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();

68
arch/arm/mach-omap2/board-4430sdp.c
View file

@ -837,74 +837,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
/* pass dummy data for UART1 */
omap_serial_init_port(&bdata);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
omap_serial_init_port(&serial4_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
static void omap4_sdp4430_wifi_mux_init(void)
@ -954,7 +888,7 @@ static void __init omap_4430sdp_init(void)
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);

6
arch/arm/mach-omap2/board-n8x0.c
View file

@ -644,15 +644,15 @@ static inline void board_serial_init(void)
bdata.pads_cnt = 0;
bdata.id = 0;
omap_serial_init_port(&bdata);
omap_serial_init_port(&bdata, NULL);
bdata.id = 1;
omap_serial_init_port(&bdata);
omap_serial_init_port(&bdata, NULL);
bdata.id = 2;
bdata.pads = serial2_pads;
bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
omap_serial_init_port(&bdata);
omap_serial_init_port(&bdata, NULL);
}
#else

68
arch/arm/mach-omap2/board-omap4panda.c
View file

@ -364,74 +364,8 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
/* pass dummy data for UART1 */
omap_serial_init_port(&bdata);
omap_serial_init_port(&serial2_data);
omap_serial_init_port(&serial3_data);
omap_serial_init_port(&serial4_data);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
/* Display DVI */
@ -562,7 +496,7 @@ static void __init omap4_panda_init(void)
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();

11
arch/arm/mach-omap2/board-ti8168evm.c
View file

@ -35,17 +35,12 @@ static void __init ti8168_evm_init(void)
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
static void __init ti8168_evm_map_io(void)
{
omapti816x_map_common_io();
}
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
.atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
.init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.map_io = ti81xx_map_io,
.init_early = ti81xx_init_early,
.init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
MACHINE_END

2
arch/arm/mach-omap2/clock.c
View file

@ -35,7 +35,7 @@
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
u8 cpu_mask;
u16 cpu_mask;
/*
* clkdm_control: if true, then when a clock is enabled in the

2
arch/arm/mach-omap2/clock.h
View file

@ -132,7 +132,7 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
extern u8 cpu_mask;
extern u16 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_dummy;

6
arch/arm/mach-omap2/clock3xxx_data.c
View file

@ -3517,6 +3517,10 @@ int __init omap3xxx_clk_init(void)
} else if (cpu_is_ti816x()) {
cpu_mask = RATE_IN_TI816X;
cpu_clkflg = CK_TI816X;
} else if (cpu_is_am33xx()) {
cpu_mask = RATE_IN_AM33XX;
} else if (cpu_is_ti814x()) {
cpu_mask = RATE_IN_TI814X;
} else if (cpu_is_omap34xx()) {
if (omap_rev() == OMAP3430_REV_ES1_0) {
cpu_mask = RATE_IN_3430ES1;
@ -3600,7 +3604,7 @@ int __init omap3xxx_clk_init(void)
* Lock DPLL5 -- here only until other device init code can
* handle this
*/
if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
omap3_clk_lock_dpll5();
/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */

48
arch/arm/mach-omap2/common.c
View file

@ -110,23 +110,49 @@ void __init omap3_map_io(void)
/*
* Adjust TAP register base such that omap3_check_revision accesses the correct
* TI816X register for checking device ID (it adds 0x204 to tap base while
* TI816X DEVICE ID register is at offset 0x600 from control base).
* TI81XX register for checking device ID (it adds 0x204 to tap base while
* TI81XX DEVICE ID register is at offset 0x600 from control base).
*/
#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \
TI816X_CONTROL_DEVICE_ID - 0x204)
#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
TI81XX_CONTROL_DEVICE_ID - 0x204)
static struct omap_globals ti816x_globals = {
static struct omap_globals ti81xx_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
.tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
};
void __init omap2_set_globals_ti816x(void)
void __init omap2_set_globals_ti81xx(void)
{
__omap2_set_globals(&ti816x_globals);
__omap2_set_globals(&ti81xx_globals);
}
void __init ti81xx_map_io(void)
{
omapti81xx_map_common_io();
}
#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
TI81XX_CONTROL_DEVICE_ID - 0x204)
static struct omap_globals am33xx_globals = {
.class = AM335X_CLASS,
.tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
.ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
.prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
.cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
};
void __init omap2_set_globals_am33xx(void)
{
__omap2_set_globals(&am33xx_globals);
}
void __init am33xx_map_io(void)
{
omapam33xx_map_common_io();
}
#endif

23
arch/arm/mach-omap2/common.h
View file

@ -54,10 +54,18 @@ static inline void omap34xx_map_common_io(void)
}
#endif
#ifdef CONFIG_SOC_OMAPTI816X
extern void omapti816x_map_common_io(void);
#ifdef CONFIG_SOC_OMAPTI81XX
extern void omapti81xx_map_common_io(void);
#else
static inline void omapti816x_map_common_io(void)
static inline void omapti81xx_map_common_io(void)
{
}
#endif
#ifdef CONFIG_SOC_OMAPAM33XX
extern void omapam33xx_map_common_io(void);
#else
static inline void omapam33xx_map_common_io(void)
{
}
#endif
@ -84,7 +92,7 @@ void omap35xx_init_early(void);
void omap3630_init_early(void);
void omap3_init_early(void); /* Do not use this one */
void am35xx_init_early(void);
void ti816x_init_early(void);
void ti81xx_init_early(void);
void omap4430_init_early(void);
/*
@ -108,7 +116,8 @@ void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_3xxx(void);
void omap2_set_globals_443x(void);
void omap2_set_globals_ti816x(void);
void omap2_set_globals_ti81xx(void);
void omap2_set_globals_am33xx(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
@ -119,7 +128,9 @@ void omap2_set_globals_prcm(struct omap_globals *);
void omap242x_map_io(void);
void omap243x_map_io(void);
void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
/**
* omap_test_timeout - busy-loop, testing a condition
@ -148,7 +159,7 @@ extern struct device *omap4_get_dsp_device(void);
void omap2_init_irq(void);
void omap3_init_irq(void);
void ti816x_init_irq(void);
void ti81xx_init_irq(void);
extern int omap_irq_pending(void);
void omap_intc_save_context(void);
void omap_intc_restore_context(void);

8
arch/arm/mach-omap2/control.h
View file

@ -52,8 +52,8 @@
#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
/* TI816X spefic control submodules */
#define TI816X_CONTROL_DEVCONF 0x600
/* TI81XX spefic control submodules */
#define TI81XX_CONTROL_DEVCONF 0x600
/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
@ -244,8 +244,8 @@
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
/* TI816X CONTROL_DEVCONF register offsets */
#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000)
/* TI81XX CONTROL_DEVCONF register offsets */
#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
/*
* REVISIT: This list of registers is not comprehensive - there are more

6
arch/arm/mach-omap2/cpuidle34xx.c
View file

@ -31,7 +31,6 @@
#include <plat/irqs.h>
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/serial.h>
#include "pm.h"
#include "control.h"
@ -260,11 +259,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct omap3_idle_statedata *cx;
int ret;
if (!omap3_can_sleep()) {
new_state_idx = drv->safe_state_index;
goto select_state;
}
/*
* Prevent idle completely if CAM is active.
* CAM does not have wakeup capability in OMAP3.

52
arch/arm/mach-omap2/id.c
View file

@ -226,7 +226,7 @@ static void __init omap4_check_features(void)
}
}
static void __init ti816x_check_features(void)
static void __init ti81xx_check_features(void)
{
omap_features = OMAP3_HAS_NEON;
}
@ -340,6 +340,29 @@ static void __init omap3_check_revision(const char **cpu_rev)
break;
}
break;
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
case 0xb8f2:
switch (rev) {
case 0:
/* FALLTHROUGH */
case 1:
omap_revision = TI8148_REV_ES1_0;
*cpu_rev = "1.0";
break;
case 2:
omap_revision = TI8148_REV_ES2_0;
*cpu_rev = "2.0";
break;
case 3:
/* FALLTHROUGH */
default:
omap_revision = TI8148_REV_ES2_1;
*cpu_rev = "2.1";
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP3630_REV_ES1_2;
@ -367,7 +390,7 @@ static void __init omap4_check_revision(void)
* Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
* Use ARM register to detect the correct ES version
*/
if (!rev && (hawkeye != 0xb94e)) {
if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
idcode = read_cpuid(CPUID_ID);
rev = (idcode & 0xf) - 1;
}
@ -389,8 +412,11 @@ static void __init omap4_check_revision(void)
omap_revision = OMAP4430_REV_ES2_1;
break;
case 4:
default:
omap_revision = OMAP4430_REV_ES2_2;
break;
case 6:
default:
omap_revision = OMAP4430_REV_ES2_3;
}
break;
case 0xb94e:
@ -401,9 +427,17 @@ static void __init omap4_check_revision(void)
break;
}
break;
case 0xb975:
switch (rev) {
case 0:
default:
omap_revision = OMAP4470_REV_ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
omap_revision = OMAP4430_REV_ES2_3;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@ -432,6 +466,10 @@ static void __init omap3_cpuinfo(const char *cpu_rev)
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
cpu_name = "TI816X";
} else if (cpu_is_am335x()) {
cpu_name = "AM335X";
} else if (cpu_is_ti814x()) {
cpu_name = "TI814X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
cpu_name = "OMAP3430/3530";
@ -472,11 +510,11 @@ void __init omap2_check_revision(void)
} else if (cpu_is_omap34xx()) {
omap3_check_revision(&cpu_rev);
/* TI816X doesn't have feature register */
if (!cpu_is_ti816x())
/* TI81XX doesn't have feature register */
if (!cpu_is_ti81xx())
omap3_check_features();
else
ti816x_check_features();
ti81xx_check_features();
omap3_cpuinfo(cpu_rev);
return;

12
arch/arm/mach-omap2/include/mach/debug-macro.S
View file

@ -66,11 +66,11 @@ omap_uart_lsr: .word 0
beq 34f @ configure OMAP3UART4
cmp \rp, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
cmp \rp, #TI816XUART1 @ ti816x UART offsets different
cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
beq 81f @ configure UART1
cmp \rp, #TI816XUART2 @ ti816x UART offsets different
cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
beq 82f @ configure UART2
cmp \rp, #TI816XUART3 @ ti816x UART offsets different
cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different
beq 83f @ configure UART3
cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
@ -94,11 +94,11 @@ omap_uart_lsr: .word 0
b 98f
44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
81: mov \rp, #UART_OFFSET(TI816X_UART1_BASE)
81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE)
b 98f
82: mov \rp, #UART_OFFSET(TI816X_UART2_BASE)
82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE)
b 98f
83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
b 98f
95: ldr \rp, =ZOOM_UART_BASE

38
arch/arm/mach-omap2/io.c
View file

@ -176,14 +176,31 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
};
#endif
#ifdef CONFIG_SOC_OMAPTI816X
static struct map_desc omapti816x_io_desc[] __initdata = {
#ifdef CONFIG_SOC_OMAPTI81XX
static struct map_desc omapti81xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
}
};
#endif
#ifdef CONFIG_SOC_OMAPAM33XX
static struct map_desc omapam33xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_WK_AM33XX_VIRT,
.pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS),
.length = L4_WK_AM33XX_SIZE,
.type = MT_DEVICE
}
};
#endif
@ -272,10 +289,17 @@ void __init omap34xx_map_common_io(void)
}
#endif
#ifdef CONFIG_SOC_OMAPTI816X
void __init omapti816x_map_common_io(void)
#ifdef CONFIG_SOC_OMAPTI81XX
void __init omapti81xx_map_common_io(void)
{
iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_OMAPAM33XX
void __init omapam33xx_map_common_io(void)
{
iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
}
#endif
@ -427,9 +451,9 @@ void __init am35xx_init_early(void)
omap3_init_early();
}
void __init ti816x_init_early(void)
void __init ti81xx_init_early(void)
{
omap2_set_globals_ti816x();
omap2_set_globals_ti81xx();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();

2
arch/arm/mach-omap2/irq.c
View file

@ -193,7 +193,7 @@ void __init omap3_init_irq(void)
omap_init_irq(OMAP34XX_IC_BASE, 96);
}
void __init ti816x_init_irq(void)
void __init ti81xx_init_irq(void)
{
omap_init_irq(OMAP34XX_IC_BASE, 128);
}

2
arch/arm/mach-omap2/opp2xxx.h
View file

@ -51,7 +51,7 @@ struct prcm_config {
unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
unsigned long base_sdrc_rfr; /* base refresh timing for a set */
unsigned char flags;
unsigned short flags;
};

20
arch/arm/mach-omap2/pm24xx.c
View file

@ -30,7 +30,6 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@ -127,27 +126,11 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
if (!console_trylock())
goto no_sleep;
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
/* Jump to SRAM suspend code */
omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
OMAP_SDRC_REGADDR(SDRC_POWER));
omap_uart_resume_idle(2);
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
if (!is_suspending())
console_unlock();
no_sleep:
omap2_gpio_resume_after_idle();
@ -239,8 +222,6 @@ static int omap2_can_sleep(void)
{
if (omap2_fclks_active())
return 0;
if (!omap_uart_can_sleep())
return 0;
if (osc_ck->usecount > 1)
return 0;
if (omap_dma_running())
@ -291,7 +272,6 @@ static int omap2_pm_suspend(void)
mir1 = omap_readl(0x480fe0a4);
omap_writel(1 << 5, 0x480fe0ac);
omap_uart_prepare_suspend();
omap2_enter_full_retention();
omap_writel(mir1, 0x480fe0a4);

43
arch/arm/mach-omap2/pm34xx.c
View file

@ -28,7 +28,6 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <trace/events/power.h>
#include <asm/suspend.h>
@ -36,7 +35,6 @@
#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
#include <plat/gpmc.h>
@ -54,15 +52,6 @@
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
{
return false;
}
#endif
/* pm34xx errata defined in pm.h */
@ -337,20 +326,11 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
if (per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)
if (!console_trylock())
goto console_still_active;
pwrdm_pre_transition();
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
@ -358,8 +338,6 @@ void omap_sram_idle(void)
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_cm_save_context();
@ -408,8 +386,6 @@ void omap_sram_idle(void)
omap3_sram_restore_context();
omap2_sms_restore_context();
}
omap_uart_resume_idle(0);
omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
@ -425,14 +401,8 @@ void omap_sram_idle(void)
omap2_gpio_resume_after_idle();
if (per_prev_state == PWRDM_POWER_OFF)
omap3_per_restore_context();
omap_uart_resume_idle(2);
omap_uart_resume_idle(3);
}
if (!is_suspending())
console_unlock();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
@ -446,21 +416,11 @@ void omap_sram_idle(void)
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
int omap3_can_sleep(void)
{
if (!omap_uart_can_sleep())
return 0;
return 1;
}
static void omap3_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (!omap3_can_sleep())
goto out;
if (omap_irq_pending() || need_resched())
goto out;
@ -494,7 +454,6 @@ static int omap3_pm_suspend(void)
goto restore;
}
omap_uart_prepare_suspend();
omap3_intc_suspend();
omap_sram_idle();
@ -541,7 +500,6 @@ static int omap3_pm_begin(suspend_state_t state)
{
disable_hlt();
suspend_state = state;
omap_uart_enable_irqs(0);
omap_prcm_irq_prepare();
return 0;
}
@ -549,7 +507,6 @@ static int omap3_pm_begin(suspend_state_t state)
static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
omap_uart_enable_irqs(1);
enable_hlt();
return;
}

917
arch/arm/mach-omap2/serial.c
View file

File diff suppressed because it is too large Load diff

1
arch/arm/plat-omap/Makefile
View file

@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o

25
arch/arm/plat-omap/include/plat/am33xx.h Normal file
View file

@ -0,0 +1,25 @@
/*
* This file contains the address info for various AM33XX modules.
*
* Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_AM33XX_H
#define __ASM_ARCH_AM33XX_H
#define L4_SLOW_AM33XX_BASE 0x48000000
#define AM33XX_SCM_BASE 0x44E10000
#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
#define AM33XX_PRCM_BASE 0x44E00000
#endif /* __ASM_ARCH_AM33XX_H */

4
arch/arm/plat-omap/include/plat/clock.h
View file

@ -59,6 +59,8 @@ struct clkops {
#define RATE_IN_4430 (1 << 5)
#define RATE_IN_TI816X (1 << 6)
#define RATE_IN_4460 (1 << 7)
#define RATE_IN_AM33XX (1 << 8)
#define RATE_IN_TI814X (1 << 9)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
@ -84,7 +86,7 @@ struct clkops {
struct clksel_rate {
u32 val;
u8 div;
u8 flags;
u16 flags;
};
/**

56
arch/arm/plat-omap/include/plat/cpu.h
View file

@ -69,6 +69,7 @@ unsigned int omap_rev(void);
* cpu_is_omap343x(): True for OMAP3430
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
* cpu_is_omap447x(): True for OMAP4470
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@ -78,6 +79,22 @@ static inline int is_omap ##class (void) \
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
#define IS_AM_CLASS(class, id) \
static inline int is_am ##class (void) \
{ \
return (GET_AM_CLASS == (id)) ? 1 : 0; \
}
#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
#define IS_TI_CLASS(class, id) \
static inline int is_ti ##class (void) \
{ \
return (GET_TI_CLASS == (id)) ? 1 : 0; \
}
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
@ -92,12 +109,21 @@ static inline int is_ti ##subclass (void) \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
#define IS_AM_SUBCLASS(subclass, id) \
static inline int is_am ##subclass (void) \
{ \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
IS_AM_CLASS(33xx, 0x33)
IS_TI_CLASS(81xx, 0x81)
IS_OMAP_SUBCLASS(242x, 0x242)
IS_OMAP_SUBCLASS(243x, 0x243)
@ -105,8 +131,11 @@ IS_OMAP_SUBCLASS(343x, 0x343)
IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
IS_OMAP_SUBCLASS(446x, 0x446)
IS_OMAP_SUBCLASS(447x, 0x447)
IS_TI_SUBCLASS(816x, 0x816)
IS_TI_SUBCLASS(814x, 0x814)
IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
@ -116,10 +145,15 @@ IS_TI_SUBCLASS(816x, 0x816)
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
#define cpu_is_ti81xx() 0
#define cpu_is_ti816x() 0
#define cpu_is_ti814x() 0
#define cpu_is_am33xx() 0
#define cpu_is_am335x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
#define cpu_is_omap447x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@ -322,7 +356,11 @@ IS_OMAP_TYPE(3517, 0x3517)
# undef cpu_is_omap3530
# undef cpu_is_omap3505
# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
# define cpu_is_omap3503() (cpu_is_omap3430() && \
(!omap3_has_iva()) && \
@ -339,16 +377,22 @@ IS_OMAP_TYPE(3517, 0x3517)
!omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_ti814x() is_ti814x()
# define cpu_is_am33xx() is_am33xx()
# define cpu_is_am335x() is_am335x()
#endif
# if defined(CONFIG_ARCH_OMAP4)
# undef cpu_is_omap44xx
# undef cpu_is_omap443x
# undef cpu_is_omap446x
# undef cpu_is_omap447x
# define cpu_is_omap44xx() is_omap44xx()
# define cpu_is_omap443x() is_omap443x()
# define cpu_is_omap446x() is_omap446x()
# define cpu_is_omap447x() is_omap447x()
# endif
/* Macros to detect if we have OMAP1 or OMAP2 */
@ -386,15 +430,27 @@ IS_OMAP_TYPE(3517, 0x3517)
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
#define TI814X_CLASS 0x81400034
#define TI8148_REV_ES1_0 TI814X_CLASS
#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
#define AM335X_CLASS 0x33500034
#define AM335X_REV_ES1_0 AM335X_CLASS
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
#define OMAP447X_CLASS 0x44700044
#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
void omap2_check_revision(void);
/*

3
arch/arm/plat-omap/include/plat/hardware.h
View file

@ -286,6 +286,7 @@
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
#include <plat/omap44xx.h>
#include <plat/ti816x.h>
#include <plat/ti81xx.h>
#include <plat/am33xx.h>
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */

12
arch/arm/plat-omap/include/plat/io.h
View file

@ -73,6 +73,9 @@
#define OMAP4_L3_IO_OFFSET 0xb4000000
#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
#define AM33XX_L4_WK_IO_OFFSET 0xb5000000
#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
@ -153,6 +156,15 @@
#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
/*
* ----------------------------------------------------------------------------
* AM33XX specific IO mapping
* ----------------------------------------------------------------------------
*/
#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE
#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
/*
* Need to look at the Size 4M for L4.
* VPOM3430 was not working for Int controller

37
arch/arm/plat-omap/include/plat/omap-serial.h
View file

@ -19,6 +19,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/pm_qos.h>
#include <plat/mux.h>
@ -33,6 +34,8 @@
#define OMAP_MODE13X_SPEED 230400
#define OMAP_UART_SCR_TX_EMPTY 0x08
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
@ -51,18 +54,27 @@
#define OMAP_UART_DMA_CH_FREE -1
#define RX_TIMEOUT (3 * HZ)
#define OMAP_MAX_HSUART_PORTS 4
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
struct omap_uart_port_info {
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
unsigned long irqflags; /* request_irq flags */
upf_t flags; /* UPF_* flags */
u32 errata;
unsigned int dma_rx_buf_size;
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
int (*get_context_loss_count)(struct device *);
void (*set_forceidle)(struct platform_device *);
void (*set_noidle)(struct platform_device *);
void (*enable_wakeup)(struct platform_device *, bool);
};
struct uart_omap_dma {
@ -86,8 +98,9 @@ struct uart_omap_dma {
spinlock_t rx_lock;
/* timer to poll activity on rx dma */
struct timer_list rx_timer;
int rx_buf_size;
int rx_timeout;
unsigned int rx_buf_size;
unsigned int rx_poll_rate;
unsigned int rx_timeout;
};
struct uart_omap_port {
@ -100,6 +113,10 @@ struct uart_omap_port {
unsigned char mcr;
unsigned char fcr;
unsigned char efr;
unsigned char dll;
unsigned char dlh;
unsigned char mdr1;
unsigned char scr;
int use_dma;
/*
@ -111,6 +128,14 @@ struct uart_omap_port {
unsigned char msr_saved_flags;
char name[20];
unsigned long port_activity;
u32 context_loss_cnt;
u32 errata;
u8 wakeups_enabled;
struct pm_qos_request pm_qos_request;
u32 latency;
u32 calc_latency;
struct work_struct qos_work;
};
#endif /* __OMAP_SERIAL_H__ */

2
arch/arm/plat-omap/include/plat/omap34xx.h
View file

@ -35,6 +35,8 @@
#define L4_EMU_34XX_BASE 0x54000000
#define L3_34XX_BASE 0x68000000
#define L4_WK_AM33XX_BASE 0x44C00000
#define OMAP3430_32KSYNCT_BASE 0x48320000
#define OMAP3430_CM_BASE 0x48004800
#define OMAP3430_PRM_BASE 0x48306800

24
arch/arm/plat-omap/include/plat/serial.h
View file

@ -51,10 +51,10 @@
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
/* TI816X serial ports */
#define TI816X_UART1_BASE 0x48020000
#define TI816X_UART2_BASE 0x48022000
#define TI816X_UART3_BASE 0x48024000
/* TI81XX serial ports */
#define TI81XX_UART1_BASE 0x48020000
#define TI81XX_UART2_BASE 0x48022000
#define TI81XX_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
@ -89,9 +89,9 @@
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
#define TI816XUART1 81
#define TI816XUART2 82
#define TI816XUART3 83
#define TI81XXUART1 81
#define TI81XXUART2 82
#define TI81XXUART3 83
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
@ -106,15 +106,13 @@
#ifndef __ASSEMBLER__
struct omap_board_data;
struct omap_uart_port_info;
extern void omap_serial_init(void);
extern void omap_serial_init_port(struct omap_board_data *bdata);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
extern void omap_uart_prepare_suspend(void);
extern void omap_uart_prepare_idle(int num);
extern void omap_uart_resume_idle(int num);
extern void omap_uart_enable_irqs(int enable);
extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif
#endif

18
arch/arm/plat-omap/include/plat/ti816x.h → arch/arm/plat-omap/include/plat/ti81xx.h
View file

@ -1,5 +1,5 @@
/*
* This file contains the address data for various TI816X modules.
* This file contains the address data for various TI81XX modules.
*
* Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
*
@ -13,15 +13,15 @@
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_TI816X_H
#define __ASM_ARCH_TI816X_H
#ifndef __ASM_ARCH_TI81XX_H
#define __ASM_ARCH_TI81XX_H
#define L4_SLOW_TI816X_BASE 0x48000000
#define L4_SLOW_TI81XX_BASE 0x48000000
#define TI816X_SCM_BASE 0x48140000
#define TI816X_CTRL_BASE TI816X_SCM_BASE
#define TI816X_PRCM_BASE 0x48180000
#define TI81XX_SCM_BASE 0x48140000
#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
#define TI81XX_PRCM_BASE 0x48180000
#define TI816X_ARM_INTC_BASE 0x48200000
#define TI81XX_ARM_INTC_BASE 0x48200000
#endif /* __ASM_ARCH_TI816X_H */
#endif /* __ASM_ARCH_TI81XX_H */

8
arch/arm/plat-omap/include/plat/uncompress.h
View file

@ -99,9 +99,9 @@ static inline void flush(void)
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
#define DEBUG_LL_TI816X(p, mach) \
_DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \
TI816XUART##p)
#define DEBUG_LL_TI81XX(p, mach) \
_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
TI81XXUART##p)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
@ -177,7 +177,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_ZOOM(omap_zoom3);
/* TI8168 base boards using UART3 */
DEBUG_LL_TI816X(3, ti8168evm);
DEBUG_LL_TI81XX(3, ti8168evm);
} while (0);
}

350
drivers/tty/serial/omap-serial.c
View file

@ -37,6 +37,7 @@
#include <linux/clk.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
@ -46,8 +47,11 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
static void serial_omap_rx_timeout(unsigned long uart_no);
static void serial_omap_rxdma_poll(unsigned long uart_no);
static int serial_omap_start_rxdma(struct uart_omap_port *up);
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
static struct workqueue_struct *serial_omap_uart_wq;
static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
{
@ -102,6 +106,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up)
omap_free_dma(up->uart_dma.rx_dma_channel);
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
up->uart_dma.rx_dma_used = false;
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
}
}
@ -110,8 +116,11 @@ static void serial_omap_enable_ms(struct uart_port *port)
struct uart_omap_port *up = (struct uart_omap_port *)port;
dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
pm_runtime_get_sync(&up->pdev->dev);
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
pm_runtime_put(&up->pdev->dev);
}
static void serial_omap_stop_tx(struct uart_port *port)
@ -129,30 +138,40 @@ static void serial_omap_stop_tx(struct uart_port *port)
omap_stop_dma(up->uart_dma.tx_dma_channel);
omap_free_dma(up->uart_dma.tx_dma_channel);
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
}
pm_runtime_get_sync(&up->pdev->dev);
if (up->ier & UART_IER_THRI) {
up->ier &= ~UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
}
static void serial_omap_stop_rx(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
pm_runtime_get_sync(&up->pdev->dev);
if (up->use_dma)
serial_omap_stop_rxdma(up);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
}
static inline void receive_chars(struct uart_omap_port *up, int *status)
static inline void receive_chars(struct uart_omap_port *up,
unsigned int *status)
{
struct tty_struct *tty = up->port.state->port.tty;
unsigned int flag;
unsigned char ch, lsr = *status;
unsigned int flag, lsr = *status;
unsigned char ch = 0;
int max_count = 256;
do {
@ -262,7 +281,10 @@ static void serial_omap_start_tx(struct uart_port *port)
int ret = 0;
if (!up->use_dma) {
pm_runtime_get_sync(&up->pdev->dev);
serial_omap_enable_ier_thri(up);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
return;
}
@ -272,6 +294,7 @@ static void serial_omap_start_tx(struct uart_port *port)
xmit = &up->port.state->xmit;
if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
pm_runtime_get_sync(&up->pdev->dev);
ret = omap_request_dma(up->uart_dma.uart_dma_tx,
"UART Tx DMA",
(void *)uart_tx_dma_callback, up,
@ -354,9 +377,13 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
unsigned int iir, lsr;
unsigned long flags;
pm_runtime_get_sync(&up->pdev->dev);
iir = serial_in(up, UART_IIR);
if (iir & UART_IIR_NO_INT)
if (iir & UART_IIR_NO_INT) {
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
return IRQ_NONE;
}
spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
@ -378,6 +405,9 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
transmit_chars(up);
spin_unlock_irqrestore(&up->port.lock, flags);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
up->port_activity = jiffies;
return IRQ_HANDLED;
}
@ -388,11 +418,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
unsigned long flags = 0;
unsigned int ret = 0;
pm_runtime_get_sync(&up->pdev->dev);
dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
spin_lock_irqsave(&up->port.lock, flags);
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
spin_unlock_irqrestore(&up->port.lock, flags);
pm_runtime_put(&up->pdev->dev);
return ret;
}
@ -402,7 +433,10 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
unsigned char status;
unsigned int ret = 0;
pm_runtime_get_sync(&up->pdev->dev);
status = check_modem_status(up);
pm_runtime_put(&up->pdev->dev);
dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
if (status & UART_MSR_DCD)
@ -433,8 +467,11 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_LOOP)
mcr |= UART_MCR_LOOP;
mcr |= up->mcr;
serial_out(up, UART_MCR, mcr);
pm_runtime_get_sync(&up->pdev->dev);
up->mcr = serial_in(up, UART_MCR);
up->mcr |= mcr;
serial_out(up, UART_MCR, up->mcr);
pm_runtime_put(&up->pdev->dev);
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@ -443,6 +480,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
pm_runtime_get_sync(&up->pdev->dev);
spin_lock_irqsave(&up->port.lock, flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
@ -450,6 +488,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
up->lcr &= ~UART_LCR_SBC;
serial_out(up, UART_LCR, up->lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
pm_runtime_put(&up->pdev->dev);
}
static int serial_omap_startup(struct uart_port *port)
@ -468,6 +507,7 @@ static int serial_omap_startup(struct uart_port *port)
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
pm_runtime_get_sync(&up->pdev->dev);
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
@ -505,7 +545,7 @@ static int serial_omap_startup(struct uart_port *port)
(dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
0);
init_timer(&(up->uart_dma.rx_timer));
up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
up->uart_dma.rx_timer.function = serial_omap_rxdma_poll;
up->uart_dma.rx_timer.data = up->pdev->id;
/* Currently the buffer size is 4KB. Can increase it */
up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
@ -523,6 +563,8 @@ static int serial_omap_startup(struct uart_port *port)
/* Enable module level wake up */
serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
up->port_activity = jiffies;
return 0;
}
@ -533,6 +575,8 @@ static void serial_omap_shutdown(struct uart_port *port)
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
pm_runtime_get_sync(&up->pdev->dev);
/*
* Disable interrupts from this port
*/
@ -566,6 +610,8 @@ static void serial_omap_shutdown(struct uart_port *port)
up->uart_dma.rx_buf_dma_phys);
up->uart_dma.rx_buf = NULL;
}
pm_runtime_put(&up->pdev->dev);
free_irq(up->port.irq, up);
}
@ -573,8 +619,6 @@ static inline void
serial_omap_configure_xonxoff
(struct uart_omap_port *up, struct ktermios *termios)
{
unsigned char efr = 0;
up->lcr = serial_in(up, UART_LCR);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
up->efr = serial_in(up, UART_EFR);
@ -584,8 +628,7 @@ serial_omap_configure_xonxoff
serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
/* clear SW control mode bits */
efr = up->efr;
efr &= OMAP_UART_SW_CLR;
up->efr &= OMAP_UART_SW_CLR;
/*
* IXON Flag:
@ -593,7 +636,7 @@ serial_omap_configure_xonxoff
* Transmit XON1, XOFF1
*/
if (termios->c_iflag & IXON)
efr |= OMAP_UART_SW_TX;
up->efr |= OMAP_UART_SW_TX;
/*
* IXOFF Flag:
@ -601,7 +644,7 @@ serial_omap_configure_xonxoff
* Receiver compares XON1, XOFF1.
*/
if (termios->c_iflag & IXOFF)
efr |= OMAP_UART_SW_RX;
up->efr |= OMAP_UART_SW_RX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
@ -624,13 +667,21 @@ serial_omap_configure_xonxoff
* load the new software flow control mode IXON or IXOFF
* and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
*/
serial_out(up, UART_EFR, efr | UART_EFR_SCD);
serial_out(up, UART_EFR, up->efr | UART_EFR_SCD);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
serial_out(up, UART_LCR, up->lcr);
}
static void serial_omap_uart_qos_work(struct work_struct *work)
{
struct uart_omap_port *up = container_of(work, struct uart_omap_port,
qos_work);
pm_qos_update_request(&up->pm_qos_request, up->latency);
}
static void
serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@ -671,6 +722,16 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
quot = serial_omap_get_divisor(port, baud);
/* calculate wakeup latency constraint */
up->calc_latency = (1000000 * up->port.fifosize) /
(1000 * baud / 8);
up->latency = up->calc_latency;
schedule_work(&up->qos_work);
up->dll = quot & 0xff;
up->dlh = quot >> 8;
up->mdr1 = UART_OMAP_MDR1_DISABLE;
up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
UART_FCR_ENABLE_FIFO;
if (up->use_dma)
@ -680,6 +741,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
pm_runtime_get_sync(&up->pdev->dev);
spin_lock_irqsave(&up->port.lock, flags);
/*
@ -723,6 +785,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, cval); /* reset DLAB */
up->lcr = cval;
up->scr = OMAP_UART_SCR_TX_EMPTY;
/* FIFOs and DMA Settings */
@ -749,17 +813,22 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->use_dma) {
serial_out(up, UART_TI752_TLR, 0);
serial_out(up, UART_OMAP_SCR,
(UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8));
up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8);
}
serial_out(up, UART_OMAP_SCR, up->scr);
serial_out(up, UART_EFR, up->efr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, up->mcr);
/* Protocol, Baud Rate, and Interrupt Settings */
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
serial_omap_mdr1_errataset(up, up->mdr1);
else
serial_out(up, UART_OMAP_MDR1, up->mdr1);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
up->efr = serial_in(up, UART_EFR);
@ -769,8 +838,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_IER, 0);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
serial_out(up, UART_DLL, up->dll); /* LS of divisor */
serial_out(up, UART_DLM, up->dlh); /* MS of divisor */
serial_out(up, UART_LCR, 0);
serial_out(up, UART_IER, up->ier);
@ -780,9 +849,14 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_LCR, cval);
if (baud > 230400 && baud != 3000000)
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
up->mdr1 = UART_OMAP_MDR1_13X_MODE;
else
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
up->mdr1 = UART_OMAP_MDR1_16X_MODE;
if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
serial_omap_mdr1_errataset(up, up->mdr1);
else
serial_out(up, UART_OMAP_MDR1, up->mdr1);
/* Hardware Flow Control Configuration */
@ -809,6 +883,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
pm_runtime_put(&up->pdev->dev);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
}
@ -820,6 +895,8 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
unsigned char efr;
dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
pm_runtime_get_sync(&up->pdev->dev);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@ -829,6 +906,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
if (!device_may_wakeup(&up->pdev->dev)) {
if (!state)
pm_runtime_forbid(&up->pdev->dev);
else
pm_runtime_allow(&up->pdev->dev);
}
pm_runtime_put(&up->pdev->dev);
}
static void serial_omap_release_port(struct uart_port *port)
@ -906,19 +992,26 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
pm_runtime_get_sync(&up->pdev->dev);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
pm_runtime_put(&up->pdev->dev);
}
static int serial_omap_poll_get_char(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
unsigned int status = serial_in(up, UART_LSR);
unsigned int status;
pm_runtime_get_sync(&up->pdev->dev);
status = serial_in(up, UART_LSR);
if (!(status & UART_LSR_DR))
return NO_POLL_CHAR;
return serial_in(up, UART_RX);
status = serial_in(up, UART_RX);
pm_runtime_put(&up->pdev->dev);
return status;
}
#endif /* CONFIG_CONSOLE_POLL */
@ -946,6 +1039,8 @@ serial_omap_console_write(struct console *co, const char *s,
unsigned int ier;
int locked = 1;
pm_runtime_get_sync(&up->pdev->dev);
local_irq_save(flags);
if (up->port.sysrq)
locked = 0;
@ -978,6 +1073,8 @@ serial_omap_console_write(struct console *co, const char *s,
if (up->msr_saved_flags)
check_modem_status(up);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
if (locked)
spin_unlock(&up->port.lock);
local_irq_restore(flags);
@ -1060,26 +1157,30 @@ static struct uart_driver serial_omap_reg = {
.cons = OMAP_CONSOLE,
};
static int
serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
#ifdef CONFIG_SUSPEND
static int serial_omap_suspend(struct device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(pdev);
struct uart_omap_port *up = dev_get_drvdata(dev);
if (up)
if (up) {
uart_suspend_port(&serial_omap_reg, &up->port);
flush_work_sync(&up->qos_work);
}
return 0;
}
static int serial_omap_resume(struct platform_device *dev)
static int serial_omap_resume(struct device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
struct uart_omap_port *up = dev_get_drvdata(dev);
if (up)
uart_resume_port(&serial_omap_reg, &up->port);
return 0;
}
#endif
static void serial_omap_rx_timeout(unsigned long uart_no)
static void serial_omap_rxdma_poll(unsigned long uart_no)
{
struct uart_omap_port *up = ui[uart_no];
unsigned int curr_dma_pos, curr_transmitted_size;
@ -1089,9 +1190,9 @@ static void serial_omap_rx_timeout(unsigned long uart_no)
if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
(curr_dma_pos == 0)) {
if (jiffies_to_msecs(jiffies - up->port_activity) <
RX_TIMEOUT) {
up->uart_dma.rx_timeout) {
mod_timer(&up->uart_dma.rx_timer, jiffies +
usecs_to_jiffies(up->uart_dma.rx_timeout));
usecs_to_jiffies(up->uart_dma.rx_poll_rate));
} else {
serial_omap_stop_rxdma(up);
up->ier |= (UART_IER_RDI | UART_IER_RLSI);
@ -1120,7 +1221,7 @@ static void serial_omap_rx_timeout(unsigned long uart_no)
}
} else {
mod_timer(&up->uart_dma.rx_timer, jiffies +
usecs_to_jiffies(up->uart_dma.rx_timeout));
usecs_to_jiffies(up->uart_dma.rx_poll_rate));
}
up->port_activity = jiffies;
}
@ -1135,6 +1236,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up)
int ret = 0;
if (up->uart_dma.rx_dma_channel == -1) {
pm_runtime_get_sync(&up->pdev->dev);
ret = omap_request_dma(up->uart_dma.uart_dma_rx,
"UART Rx DMA",
(void *)uart_rx_dma_callback, up,
@ -1158,7 +1260,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up)
/* FIXME: Cache maintenance needed here? */
omap_start_dma(up->uart_dma.rx_dma_channel);
mod_timer(&up->uart_dma.rx_timer, jiffies +
usecs_to_jiffies(up->uart_dma.rx_timeout));
usecs_to_jiffies(up->uart_dma.rx_poll_rate));
up->uart_dma.rx_dma_used = true;
return ret;
}
@ -1275,25 +1377,47 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.ops = &serial_omap_pops;
up->port.line = pdev->id;
up->port.membase = omap_up_info->membase;
up->port.mapbase = omap_up_info->mapbase;
up->port.mapbase = mem->start;
up->port.membase = ioremap(mem->start, resource_size(mem));
if (!up->port.membase) {
dev_err(&pdev->dev, "can't ioremap UART\n");
ret = -ENOMEM;
goto err;
}
up->port.flags = omap_up_info->flags;
up->port.irqflags = omap_up_info->irqflags;
up->port.uartclk = omap_up_info->uartclk;
up->uart_dma.uart_base = mem->start;
up->errata = omap_up_info->errata;
if (omap_up_info->dma_enabled) {
up->uart_dma.uart_dma_tx = dma_tx->start;
up->uart_dma.uart_dma_rx = dma_rx->start;
up->use_dma = 1;
up->uart_dma.rx_buf_size = 4096;
up->uart_dma.rx_timeout = 2;
up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
spin_lock_init(&(up->uart_dma.tx_lock));
spin_lock_init(&(up->uart_dma.rx_lock));
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
pm_qos_add_request(&up->pm_qos_request,
PM_QOS_CPU_DMA_LATENCY, up->latency);
serial_omap_uart_wq = create_singlethread_workqueue(up->name);
INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
omap_up_info->autosuspend_timeout);
pm_runtime_irq_safe(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
ui[pdev->id] = up;
serial_omap_add_console_port(up);
@ -1301,6 +1425,7 @@ static int serial_omap_probe(struct platform_device *pdev)
if (ret != 0)
goto do_release_region;
pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, up);
return 0;
err:
@ -1315,22 +1440,157 @@ static int serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
platform_set_drvdata(dev, NULL);
if (up) {
pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request);
kfree(up);
}
platform_set_drvdata(dev, NULL);
return 0;
}
/*
* Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
* The access to uart register after MDR1 Access
* causes UART to corrupt data.
*
* Need a delay =
* 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS)
* give 10 times as much
*/
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
{
u8 timeout = 255;
serial_out(up, UART_OMAP_MDR1, mdr1);
udelay(2);
serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_RCVR);
/*
* Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
* TX_FIFO_E bit is 1.
*/
while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
(UART_LSR_THRE | UART_LSR_DR))) {
timeout--;
if (!timeout) {
/* Should *never* happen. we warn and carry on */
dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
serial_in(up, UART_LSR));
break;
}
udelay(1);
}
}
static void serial_omap_restore_context(struct uart_omap_port *up)
{
if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
serial_omap_mdr1_errataset(up, UART_OMAP_MDR1_DISABLE);
else
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
serial_out(up, UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, 0x0); /* Operational mode */
serial_out(up, UART_IER, 0x0);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
serial_out(up, UART_DLL, up->dll);
serial_out(up, UART_DLM, up->dlh);
serial_out(up, UART_LCR, 0x0); /* Operational mode */
serial_out(up, UART_IER, up->ier);
serial_out(up, UART_FCR, up->fcr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, up->mcr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */
serial_out(up, UART_OMAP_SCR, up->scr);
serial_out(up, UART_EFR, up->efr);
serial_out(up, UART_LCR, up->lcr);
if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
serial_omap_mdr1_errataset(up, up->mdr1);
else
serial_out(up, UART_OMAP_MDR1, up->mdr1);
}
#ifdef CONFIG_PM_RUNTIME
static int serial_omap_runtime_suspend(struct device *dev)
{
struct uart_omap_port *up = dev_get_drvdata(dev);
struct omap_uart_port_info *pdata = dev->platform_data;
if (!up)
return -EINVAL;
if (!pdata->enable_wakeup)
return 0;
if (pdata->get_context_loss_count)
up->context_loss_cnt = pdata->get_context_loss_count(dev);
if (device_may_wakeup(dev)) {
if (!up->wakeups_enabled) {
pdata->enable_wakeup(up->pdev, true);
up->wakeups_enabled = true;
}
} else {
if (up->wakeups_enabled) {
pdata->enable_wakeup(up->pdev, false);
up->wakeups_enabled = false;
}
}
/* Errata i291 */
if (up->use_dma && pdata->set_forceidle &&
(up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
pdata->set_forceidle(up->pdev);
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
schedule_work(&up->qos_work);
return 0;
}
static int serial_omap_runtime_resume(struct device *dev)
{
struct uart_omap_port *up = dev_get_drvdata(dev);
struct omap_uart_port_info *pdata = dev->platform_data;
if (up) {
if (pdata->get_context_loss_count) {
u32 loss_cnt = pdata->get_context_loss_count(dev);
if (up->context_loss_cnt != loss_cnt)
serial_omap_restore_context(up);
}
/* Errata i291 */
if (up->use_dma && pdata->set_noidle &&
(up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
pdata->set_noidle(up->pdev);
up->latency = up->calc_latency;
schedule_work(&up->qos_work);
}
return 0;
}
#endif
static const struct dev_pm_ops serial_omap_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume)
SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend,
serial_omap_runtime_resume, NULL)
};
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
.remove = serial_omap_remove,
.suspend = serial_omap_suspend,
.resume = serial_omap_resume,
.driver = {
.name = DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
},
};