ARM: at91: dt: at91sam9x5: complete NAND pinctrl

There was only chip enable and readdy/busy pins for the nand controller.
This add the rest of the pins.
pinctrl_nand_16bits contains the specific muxes for 16 bits NANDs.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Richard Genoud 2013-03-11 15:12:40 +01:00 committed by Nicolas Ferre
parent f04feec250
commit 7f06472f1c

View file

@ -238,8 +238,32 @@
nand {
pinctrl_nand: nand-0 {
atmel,pins =
<3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
3 5 0x0 0x1>; /* PD5 gpio RDY/BUSY pin pull_up */
<3 0 0x1 0x0 /* PD0 periph A Read Enable */
3 1 0x1 0x0 /* PD1 periph A Write Enable */
3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
};
pinctrl_nand_16bits: nand_16bits-0 {
atmel,pins =
<3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};