diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
new file mode 100644
index 000000000000..bff51a2fee1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
@@ -0,0 +1,36 @@
+OMAP GPIO controller bindings
+
+Required properties:
+- compatible:
+ - "ti,omap2-gpio" for OMAP2 controllers
+ - "ti,omap3-gpio" for OMAP3 controllers
+ - "ti,omap4-gpio" for OMAP4 controllers
+- #gpio-cells : Should be two.
+ - first cell is the pin number
+ - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+- interrupt-controller: Mark the device node as an interrupt controller
+ The first cell is the GPIO number.
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+
+OMAP specific properties:
+- ti,hwmods: Name of the hwmod associated to the GPIO:
+ "gpio<X>", <X> being the 1-based instance number from the HW spec
+
+
+Example:
+
+gpio4: gpio4 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/gpio/sodaville.txt b/Documentation/devicetree/bindings/gpio/sodaville.txt
new file mode 100644
index 000000000000..563eff22b975
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sodaville.txt
@@ -0,0 +1,48 @@
+GPIO controller on CE4100 / Sodaville SoCs
+==========================================
+
+The bindings for CE4100's GPIO controller match the generic description
+which is covered by the gpio.txt file in this folder.
+
+The only additional property is the intel,muxctl property which holds the
+value which is written into the MUXCNTL register.
+
+There is no compatible property for now because the driver is probed via
+PCI id (vendor 0x8086 device 0x2e67).
+
+The interrupt specifier consists of two cells encoded as follows:
+ - <1st cell>: The interrupt-number that identifies the interrupt source.
+ - <2nd cell>: The level-sense information, encoded as follows:
+ 4 - active high level-sensitive
+ 8 - active low level-sensitive
+
+Example of the GPIO device and one user:
+
+ pcigpio: gpio@b,1 {
+ /* two cells for GPIO and interrupt */
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "pci8086,2e67.2",
+ "pci8086,2e67",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x15900 0x0 0x0 0x0 0x0>;
+ /* Interrupt line of the gpio device */
+ interrupts = <15 1>;
+ /* It is an interrupt and GPIO controller itself */
+ interrupt-controller;
+ gpio-controller;
+ intel,muxctl = <0>;
+ };
+
+ testuser@20 {
+ compatible = "example,testuser";
+ /* User the 11th GPIO line as an active high triggered
+ * level interrupt
+ */
+ interrupts = <11 8>;
+ interrupt-parent = <&pcigpio>;
+ /* Use this GPIO also with the gpio functions */
+ gpios = <&pcigpio 11 0>;
+ };
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 792faa3c06cf..620a07844e8c 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -271,9 +271,26 @@ Some platforms may also use knowledge about what GPIOs are active for
power management, such as by powering down unused chip sectors and, more
easily, gating off unused clocks.
-Note that requesting a GPIO does NOT cause it to be configured in any
-way; it just marks that GPIO as in use. Separate code must handle any
-pin setup (e.g. controlling which pin the GPIO uses, pullup/pulldown).
+For GPIOs that use pins known to the pinctrl subsystem, that subsystem should
+be informed of their use; a gpiolib driver's .request() operation may call
+pinctrl_request_gpio(), and a gpiolib driver's .free() operation may call
+pinctrl_free_gpio(). The pinctrl subsystem allows a pinctrl_request_gpio()
+to succeed concurrently with a pin or pingroup being "owned" by a device for
+pin multiplexing.
+
+Any programming of pin multiplexing hardware that is needed to route the
+GPIO signal to the appropriate pin should occur within a GPIO driver's
+.direction_input() or .direction_output() operations, and occur after any
+setup of an output GPIO's value. This allows a glitch-free migration from a
+pin's special function to GPIO. This is sometimes required when using a GPIO
+to implement a workaround on signals typically driven by a non-GPIO HW block.
+
+Some platforms allow some or all GPIO signals to be routed to different pins.
+Similarly, other aspects of the GPIO or pin may need to be configured, such as
+pullup/pulldown. Platform software should arrange that any such details are
+configured prior to gpio_request() being called for those GPIOs, e.g. using
+the pinctrl subsystem's mapping table, so that GPIO users need not be aware
+of these details.
Also note that it's your responsibility to have stopped using a GPIO
before you free it.
@@ -302,6 +319,8 @@ where 'flags' is currently defined to specify the following properties:
* GPIOF_INIT_LOW - as output, set initial level to LOW
* GPIOF_INIT_HIGH - as output, set initial level to HIGH
+ * GPIOF_OPEN_DRAIN - gpio pin is open drain type.
+ * GPIOF_OPEN_SOURCE - gpio pin is open source type.
since GPIOF_INIT_* are only valid when configured as output, so group valid
combinations as:
@@ -310,8 +329,19 @@ combinations as:
* GPIOF_OUT_INIT_LOW - configured as output, initial level LOW
* GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH
-In the future, these flags can be extended to support more properties such
-as open-drain status.
+When setting the flag as GPIOF_OPEN_DRAIN then it will assume that pins is
+open drain type. Such pins will not be driven to 1 in output mode. It is
+require to connect pull-up on such pins. By enabling this flag, gpio lib will
+make the direction to input when it is asked to set value of 1 in output mode
+to make the pin HIGH. The pin is make to LOW by driving value 0 in output mode.
+
+When setting the flag as GPIOF_OPEN_SOURCE then it will assume that pins is
+open source type. Such pins will not be driven to 0 in output mode. It is
+require to connect pull-down on such pin. By enabling this flag, gpio lib will
+make the direction to input when it is asked to set value of 0 in output mode
+to make the pin LOW. The pin is make to HIGH by driving value 1 in output mode.
+
+In the future, these flags can be extended to support more properties.
Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is
introduced to encapsulate all three fields as:
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index cb75b657b04b..b8a96c6a1a30 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -218,30 +218,14 @@ extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
/*-------------------------------------------------------------------------*/
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
+/*
+ * Wrappers for "new style" GPIO calls, using the new infrastructure
* which lets us plug in FPGA, I2C, and other implementations.
- * *
+ *
* The original OMAP-specific calls should eventually be removed.
*/
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int irq_to_gpio(unsigned irq)
-{
- int tmp;
-
- /* omap1 SOC mpuio */
- if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
- return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-
- /* SOC gpio */
- tmp = irq - IH_GPIO_BASE;
- if (tmp < OMAP_MAX_GPIO_LINES)
- return tmp;
-
- /* we don't supply reverse mappings for non-SOC gpios */
- return -EIO;
-}
-
#endif
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
index e70be38ce039..ce874f872cc6 100644
--- a/arch/x86/platform/ce4100/falconfalls.dts
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -208,16 +208,19 @@
interrupts = <14 1>;
};
- gpio@b,1 {
+ pcigpio: gpio@b,1 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
compatible = "pci8086,2e67.2",
"pci8086,2e67",
"pciclassff0000",
"pciclassff00";
- #gpio-cells = <2>;
reg = <0x15900 0x0 0x0 0x0 0x0>;
interrupts = <15 1>;
+ interrupt-controller;
gpio-controller;
+ intel,muxctl = <0>;
};
i2c-controller@b,2 {
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0409cf35adda..edadbdad31d0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -236,6 +236,12 @@ config GPIO_MAX732X_IRQ
Say yes here to enable the max732x to be used as an interrupt
controller. It requires the driver to be built in the kernel.
+config GPIO_MC9S08DZ60
+ bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
+ depends on I2C && MACH_MX35_3DS
+ help
+ Select this to enable the MC9S08DZ60 GPIO driver
+
config GPIO_PCA953X
tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
depends on I2C
@@ -422,6 +428,14 @@ config GPIO_ML_IOH
Hub) which is for IVI(In-Vehicle Infotainment) use.
This driver can access the IOH's GPIO device.
+config GPIO_SODAVILLE
+ bool "Intel Sodaville GPIO support"
+ depends on X86 && PCI && OF && BROKEN
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+ help
+ Say Y here to support Intel Sodaville GPIO.
+
config GPIO_TIMBERDALE
bool "Support for timberdale GPIO IP"
depends on MFD_TIMBERDALE && HAS_IOMEM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9a8fb54ae462..007f54bd0081 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
+obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
+obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index df0d59570a84..3d000169285d 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -313,10 +313,16 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
return -ENODEV;
}
-static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
+static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
- u32 mask = (u32) irq_data_get_irq_handler_data(d);
+ struct davinci_gpio_controller *d;
+ struct davinci_gpio_regs __iomem *g;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ u32 mask;
+
+ d = (struct davinci_gpio_controller *)data->handler_data;
+ g = (struct davinci_gpio_regs __iomem *)d->regs;
+ mask = __gpio_mask(data->irq - soc_info->gpio_irq);
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
@@ -380,7 +386,7 @@ static int __init davinci_gpio_irq_setup(void)
* IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
*/
if (soc_info->gpio_unbanked) {
- static struct irq_chip gpio_irqchip_unbanked;
+ static struct irq_chip_type gpio_unbanked;
/* pass "bank 0" GPIO IRQs to AINTC */
chips[0].chip.to_irq = gpio_to_irq_unbanked;
@@ -388,9 +394,10 @@ static int __init davinci_gpio_irq_setup(void)
/* AINTC handles mask/unmask; GPIO handles triggering */
irq = bank_irq;
- gpio_irqchip_unbanked = *irq_get_chip(irq);
- gpio_irqchip_unbanked.name = "GPIO-AINTC";
- gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
+ gpio_unbanked = *container_of(irq_get_chip(irq),
+ struct irq_chip_type, chip);
+ gpio_unbanked.chip.name = "GPIO-AINTC";
+ gpio_unbanked.chip.irq_set_type = gpio_irq_type_unbanked;
/* default trigger: both edges */
g = gpio2regs(0);
@@ -399,9 +406,8 @@ static int __init davinci_gpio_irq_setup(void)
/* set the direct IRQs up to use that irqchip */
for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
- irq_set_chip(irq, &gpio_irqchip_unbanked);
- irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
- irq_set_chip_data(irq, (__force void *)g);
+ irq_set_chip(irq, &gpio_unbanked.chip);
+ irq_set_handler_data(irq, &chips[gpio / 32]);
irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 4ca5642e9776..776b772523e5 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -12,8 +12,6 @@
* published by the Free Software Foundation.
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -65,11 +63,6 @@ static void ep93xx_gpio_update_int_params(unsigned port)
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
-static inline void ep93xx_gpio_int_mask(unsigned line)
-{
- gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
{
int line = irq_to_gpio(irq);
@@ -212,7 +205,6 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
handler = handle_edge_irq;
break;
default:
- pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
return -EINVAL;
}
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index ddfacc5ce56d..61c2d08d37b6 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -59,12 +59,14 @@
#define GPO3_PIN_TO_BIT(x) (1 << (x))
#define GPIO012_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
#define GPIO3_PIN_IN_SHIFT(x) ((x) == 5 ? 24 : 10 + (x))
-#define GPIO3_PIN_IN_SEL(x, y) ((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN_IN_SEL(x, y) (((x) >> GPIO3_PIN_IN_SHIFT(y)) & 1)
#define GPIO3_PIN5_IN_SEL(x) (((x) >> 24) & 1)
#define GPI3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
+#define GPO3_PIN_IN_SEL(x, y) (((x) >> (y)) & 1)
struct gpio_regs {
void __iomem *inp_state;
+ void __iomem *outp_state;
void __iomem *outp_set;
void __iomem *outp_clr;
void __iomem *dir_set;
@@ -145,6 +147,7 @@ static struct gpio_regs gpio_grp_regs_p2 = {
static struct gpio_regs gpio_grp_regs_p3 = {
.inp_state = LPC32XX_GPIO_P3_INP_STATE,
+ .outp_state = LPC32XX_GPIO_P3_OUTP_STATE,
.outp_set = LPC32XX_GPIO_P3_OUTP_SET,
.outp_clr = LPC32XX_GPIO_P3_OUTP_CLR,
.dir_set = LPC32XX_GPIO_P2_DIR_SET,
@@ -240,6 +243,12 @@ static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
}
+static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
+ unsigned pin)
+{
+ return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin);
+}
+
/*
* GENERIC_GPIO primitives.
*/
@@ -340,6 +349,13 @@ static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
__set_gpo_level_p3(group, pin, value);
}
+static int lpc32xx_gpo_get_value(struct gpio_chip *chip, unsigned pin)
+{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ return __get_gpo_state_p3(group, pin);
+}
+
static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
{
if (pin < chip->ngpio)
@@ -427,6 +443,7 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
.label = "gpo_p3",
.direction_output = lpc32xx_gpio_dir_out_always,
.set = lpc32xx_gpo_set_value,
+ .get = lpc32xx_gpo_get_value,
.request = lpc32xx_gpio_request,
.base = LPC32XX_GPO_P3_GRP,
.ngpio = LPC32XX_GPO_P3_MAX,
diff --git a/drivers/gpio/gpio-mc9s08dz60.c b/drivers/gpio/gpio-mc9s08dz60.c
new file mode 100644
index 000000000000..2738cc44d636
--- /dev/null
+++ b/drivers/gpio/gpio-mc9s08dz60.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Wu Guoxing <b39297@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#define GPIO_GROUP_NUM 2
+#define GPIO_NUM_PER_GROUP 8
+#define GPIO_NUM (GPIO_GROUP_NUM*GPIO_NUM_PER_GROUP)
+
+struct mc9s08dz60 {
+ struct i2c_client *client;
+ struct gpio_chip chip;
+};
+
+static inline struct mc9s08dz60 *to_mc9s08dz60(struct gpio_chip *gc)
+{
+ return container_of(gc, struct mc9s08dz60, chip);
+}
+
+
+static void mc9s_gpio_to_reg_and_bit(int offset, u8 *reg, u8 *bit)
+{
+ *reg = 0x20 + offset / GPIO_NUM_PER_GROUP;
+ *bit = offset % GPIO_NUM_PER_GROUP;
+}
+
+static int mc9s08dz60_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ u8 reg, bit;
+ s32 value;
+ struct mc9s08dz60 *mc9s = to_mc9s08dz60(gc);
+
+ mc9s_gpio_to_reg_and_bit(offset, ®, &bit);
+ value = i2c_smbus_read_byte_data(mc9s->client, reg);
+
+ return (value >= 0) ? (value >> bit) & 0x1 : 0;
+}
+
+static int mc9s08dz60_set(struct mc9s08dz60 *mc9s, unsigned offset, int val)
+{
+ u8 reg, bit;
+ s32 value;
+
+ mc9s_gpio_to_reg_and_bit(offset, ®, &bit);
+ value = i2c_smbus_read_byte_data(mc9s->client, reg);
+ if (value >= 0) {
+ if (val)
+ value |= 1 << bit;
+ else
+ value &= ~(1 << bit);
+
+ return i2c_smbus_write_byte_data(mc9s->client, reg, value);
+ } else
+ return value;
+
+}
+
+
+static void mc9s08dz60_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+ struct mc9s08dz60 *mc9s = to_mc9s08dz60(gc);
+
+ mc9s08dz60_set(mc9s, offset, val);
+}
+
+static int mc9s08dz60_direction_output(struct gpio_chip *gc,
+ unsigned offset, int val)
+{
+ struct mc9s08dz60 *mc9s = to_mc9s08dz60(gc);
+
+ return mc9s08dz60_set(mc9s, offset, val);
+}
+
+static int mc9s08dz60_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct mc9s08dz60 *mc9s;
+
+ mc9s = kzalloc(sizeof(*mc9s), GFP_KERNEL);
+ if (!mc9s)
+ return -ENOMEM;
+
+ mc9s->chip.label = client->name;
+ mc9s->chip.base = -1;
+ mc9s->chip.dev = &client->dev;
+ mc9s->chip.owner = THIS_MODULE;
+ mc9s->chip.ngpio = GPIO_NUM;
+ mc9s->chip.can_sleep = 1;
+ mc9s->chip.get = mc9s08dz60_get_value;
+ mc9s->chip.set = mc9s08dz60_set_value;
+ mc9s->chip.direction_output = mc9s08dz60_direction_output;
+ mc9s->client = client;
+ i2c_set_clientdata(client, mc9s);
+
+ ret = gpiochip_add(&mc9s->chip);
+ if (ret)
+ goto error;
+
+ return 0;
+
+ error:
+ kfree(mc9s);
+ return ret;
+}
+
+static int mc9s08dz60_remove(struct i2c_client *client)
+{
+ struct mc9s08dz60 *mc9s;
+ int ret;
+
+ mc9s = i2c_get_clientdata(client);
+
+ ret = gpiochip_remove(&mc9s->chip);
+ if (!ret)
+ kfree(mc9s);
+
+ return ret;
+
+}
+
+static const struct i2c_device_id mc9s08dz60_id[] = {
+ {"mc9s08dz60", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, mc9s08dz60_id);
+
+static struct i2c_driver mc9s08dz60_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mc9s08dz60",
+ },
+ .probe = mc9s08dz60_probe,
+ .remove = mc9s08dz60_remove,
+ .id_table = mc9s08dz60_id,
+};
+
+module_i2c_driver(mc9s08dz60_i2c_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc. "
+ "Wu Guoxing <b39297@freescale.com>");
+MODULE_DESCRIPTION("mc9s08dz60 gpio function on mx35 3ds board");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index f49bd6f47a50..1adc2ec1e383 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -19,9 +19,12 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/irqdomain.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -50,10 +53,10 @@ struct gpio_regs {
struct gpio_bank {
struct list_head node;
- unsigned long pbase;
void __iomem *base;
u16 irq;
- u16 virtual_irq_start;
+ int irq_base;
+ struct irq_domain *domain;
u32 suspend_wakeup;
u32 saved_wakeup;
u32 non_wakeup_gpios;
@@ -77,7 +80,6 @@ struct gpio_bank {
int stride;
u32 width;
int context_loss_count;
- u16 id;
int power_mode;
bool workaround_enabled;
@@ -91,6 +93,11 @@ struct gpio_bank {
#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
#define GPIO_MOD_CTRL_BIT BIT(0)
+static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
+{
+ return gpio_irq - bank->irq_base + bank->chip.base;
+}
+
static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
{
void __iomem *reg = bank->base;
@@ -113,10 +120,13 @@ static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
void __iomem *reg = bank->base;
u32 l = GPIO_BIT(bank, gpio);
- if (enable)
+ if (enable) {
reg += bank->regs->set_dataout;
- else
+ bank->context.dataout |= l;
+ } else {
reg += bank->regs->clr_dataout;
+ bank->context.dataout &= ~l;
+ }
__raw_writel(l, reg);
}
@@ -137,25 +147,25 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
bank->context.dataout = l;
}
-static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int offset)
{
void __iomem *reg = bank->base + bank->regs->datain;
- return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
+ return (__raw_readl(reg) & (1 << offset)) != 0;
}
-static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+static int _get_gpio_dataout(struct gpio_bank *bank, int offset)
{
void __iomem *reg = bank->base + bank->regs->dataout;
- return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
+ return (__raw_readl(reg) & (1 << offset)) != 0;
}
static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
{
int l = __raw_readl(base + reg);
- if (set)
+ if (set)
l |= mask;
else
l &= ~mask;
@@ -238,7 +248,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
}
static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
- int trigger)
+ unsigned trigger)
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
@@ -320,7 +330,8 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
#endif
-static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
+static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
+ unsigned trigger)
{
void __iomem *reg = bank->base;
void __iomem *base = bank->base;
@@ -367,7 +378,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
static int gpio_irq_type(struct irq_data *d, unsigned type)
{
- struct gpio_bank *bank;
+ struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
unsigned gpio;
int retval;
unsigned long flags;
@@ -375,13 +386,11 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
else
- gpio = d->irq - IH_GPIO_BASE;
+ gpio = irq_to_gpio(bank, d->irq);
if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
- bank = irq_data_get_irq_chip_data(d);
-
if (!bank->regs->leveldetect0 &&
(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
return -EINVAL;
@@ -442,6 +451,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
if (bank->regs->set_irqenable) {
reg += bank->regs->set_irqenable;
l = gpio_mask;
+ bank->context.irqenable1 |= gpio_mask;
} else {
reg += bank->regs->irqenable;
l = __raw_readl(reg);
@@ -449,10 +459,10 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
l &= ~gpio_mask;
else
l |= gpio_mask;
+ bank->context.irqenable1 = l;
}
__raw_writel(l, reg);
- bank->context.irqenable1 = l;
}
static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
@@ -463,6 +473,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
if (bank->regs->clr_irqenable) {
reg += bank->regs->clr_irqenable;
l = gpio_mask;
+ bank->context.irqenable1 &= ~gpio_mask;
} else {
reg += bank->regs->irqenable;
l = __raw_readl(reg);
@@ -470,15 +481,18 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
l |= gpio_mask;
else
l &= ~gpio_mask;
+ bank->context.irqenable1 = l;
}
__raw_writel(l, reg);
- bank->context.irqenable1 = l;
}
static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
{
- _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ if (enable)
+ _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
+ else
+ _disable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
}
/*
@@ -495,7 +509,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
unsigned long flags;
if (bank->non_wakeup_gpios & gpio_bit) {
- dev_err(bank->dev,
+ dev_err(bank->dev,
"Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
return -EINVAL;
}
@@ -506,6 +520,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
else
bank->suspend_wakeup &= ~gpio_bit;
+ __raw_writel(bank->suspend_wakeup, bank->base + bank->regs->wkup_en);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@@ -522,14 +537,10 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
- struct gpio_bank *bank;
- int retval;
+ struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned int gpio = irq_to_gpio(bank, d->irq);
- bank = irq_data_get_irq_chip_data(d);
- retval = _set_gpio_wakeup(bank, gpio, enable);
-
- return retval;
+ return _set_gpio_wakeup(bank, gpio, enable);
}
static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -671,13 +682,15 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (!isr)
break;
- gpio_irq = bank->virtual_irq_start;
+ gpio_irq = bank->irq_base;
for (; isr != 0; isr >>= 1, gpio_irq++) {
- gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq));
+ int gpio = irq_to_gpio(bank, gpio_irq);
if (!(isr & 1))
continue;
+ gpio_index = GPIO_INDEX(bank, gpio);
+
/*
* Some chips can't respond to both rising and falling
* at the same time. If this irq was requested with
@@ -703,8 +716,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
static void gpio_irq_shutdown(struct irq_data *d)
{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned int gpio = irq_to_gpio(bank, d->irq);
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
@@ -714,16 +727,16 @@ static void gpio_irq_shutdown(struct irq_data *d)
static void gpio_ack_irq(struct irq_data *d)
{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned int gpio = irq_to_gpio(bank, d->irq);
_clear_gpio_irqstatus(bank, gpio);
}
static void gpio_mask_irq(struct irq_data *d)
{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned int gpio = irq_to_gpio(bank, d->irq);
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
@@ -734,8 +747,8 @@ static void gpio_mask_irq(struct irq_data *d)
static void gpio_unmask_irq(struct irq_data *d)
{
- unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned int gpio = irq_to_gpio(bank, d->irq);
unsigned int irq_mask = GPIO_BIT(bank, gpio);
u32 trigger = irqd_get_trigger_type(d);
unsigned long flags;
@@ -852,19 +865,15 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
static int gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct gpio_bank *bank;
- void __iomem *reg;
- int gpio;
u32 mask;
- gpio = chip->base + offset;
bank = container_of(chip, struct gpio_bank, chip);
- reg = bank->base;
- mask = GPIO_BIT(bank, gpio);
+ mask = (1 << offset);
if (gpio_is_input(bank, mask))
- return _get_gpio_datain(bank, gpio);
+ return _get_gpio_datain(bank, offset);
else
- return _get_gpio_dataout(bank, gpio);
+ return _get_gpio_dataout(bank, offset);
}
static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -917,7 +926,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
struct gpio_bank *bank;
bank = container_of(chip, struct gpio_bank, chip);
- return bank->virtual_irq_start + offset;
+ return bank->irq_base + offset;
}
/*---------------------------------------------------------------------*/
@@ -970,7 +979,7 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
_gpio_rmw(base, bank->regs->ctrl, 0, 1);
}
-static __init void
+static __devinit void
omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
unsigned int num)
{
@@ -1030,8 +1039,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
gpiochip_add(&bank->chip);
- for (j = bank->virtual_irq_start;
- j < bank->virtual_irq_start + bank->width; j++) {
+ for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
irq_set_lockdep_class(j, &gpio_lock_class);
irq_set_chip_data(j, bank);
if (bank->is_mpuio) {
@@ -1046,39 +1054,38 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
irq_set_handler_data(bank->irq, bank);
}
+static const struct of_device_id omap_gpio_match[];
+
static int __devinit omap_gpio_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ const struct of_device_id *match;
struct omap_gpio_platform_data *pdata;
struct resource *res;
struct gpio_bank *bank;
int ret = 0;
- if (!pdev->dev.platform_data) {
- ret = -EINVAL;
- goto err_exit;
- }
+ match = of_match_device(of_match_ptr(omap_gpio_match), dev);
- bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL);
+ pdata = match ? match->data : dev->platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ bank = devm_kzalloc(&pdev->dev, sizeof(struct gpio_bank), GFP_KERNEL);
if (!bank) {
- dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
- ret = -ENOMEM;
- goto err_exit;
+ dev_err(dev, "Memory alloc failed\n");
+ return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!res)) {
- dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n",
- pdev->id);
- ret = -ENODEV;
- goto err_free;
+ dev_err(dev, "Invalid IRQ resource\n");
+ return -ENODEV;
}
bank->irq = res->start;
- bank->id = pdev->id;
-
- pdata = pdev->dev.platform_data;
- bank->virtual_irq_start = pdata->virtual_irq_start;
- bank->dev = &pdev->dev;
+ bank->dev = dev;
bank->dbck_flag = pdata->dbck_flag;
bank->stride = pdata->bank_stride;
bank->width = pdata->bank_width;
@@ -1087,6 +1094,18 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
bank->loses_context = pdata->loses_context;
bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
+#ifdef CONFIG_OF_GPIO
+ bank->chip.of_node = of_node_get(node);
+#endif
+
+ bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
+ if (bank->irq_base < 0) {
+ dev_err(dev, "Couldn't allocate IRQ numbers\n");
+ return -ENODEV;
+ }
+
+ bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
+ 0, &irq_domain_simple_ops, NULL);
if (bank->regs->set_dataout && bank->regs->clr_dataout)
bank->set_dataout = _set_gpio_dataout_reg;
@@ -1098,18 +1117,20 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
/* Static mapping, never released */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!res)) {
- dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n",
- pdev->id);
- ret = -ENODEV;
- goto err_free;
+ dev_err(dev, "Invalid mem resource\n");
+ return -ENODEV;
}
- bank->base = ioremap(res->start, resource_size(res));
+ if (!devm_request_mem_region(dev, res->start, resource_size(res),
+ pdev->name)) {
+ dev_err(dev, "Region already claimed\n");
+ return -EBUSY;
+ }
+
+ bank->base = devm_ioremap(dev, res->start, resource_size(res));
if (!bank->base) {
- dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n",
- pdev->id);
- ret = -ENOMEM;
- goto err_free;
+ dev_err(dev, "Could not ioremap\n");
+ return -ENOMEM;
}
platform_set_drvdata(pdev, bank);
@@ -1130,11 +1151,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
list_add_tail(&bank->node, &omap_gpio_list);
return ret;
-
-err_free:
- kfree(bank);
-err_exit:
- return ret;
}
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -1196,8 +1212,30 @@ static int omap_gpio_runtime_suspend(struct device *dev)
struct gpio_bank *bank = platform_get_drvdata(pdev);
u32 l1 = 0, l2 = 0;
unsigned long flags;
+ u32 wake_low, wake_hi;
spin_lock_irqsave(&bank->lock, flags);
+
+ /*
+ * Only edges can generate a wakeup event to the PRCM.
+ *
+ * Therefore, ensure any wake-up capable GPIOs have
+ * edge-detection enabled before going idle to ensure a wakeup
+ * to the PRCM is generated on a GPIO transition. (c.f. 34xx
+ * NDA TRM 25.5.3.1)
+ *
+ * The normal values will be restored upon ->runtime_resume()
+ * by writing back the values saved in bank->context.
+ */
+ wake_low = bank->context.leveldetect0 & bank->context.wake_en;
+ if (wake_low)
+ __raw_writel(wake_low | bank->context.fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ wake_hi = bank->context.leveldetect1 & bank->context.wake_en;
+ if (wake_hi)
+ __raw_writel(wake_hi | bank->context.risingdetect,
+ bank->base + bank->regs->risingdetect);
+
if (bank->power_mode != OFF_MODE) {
bank->power_mode = 0;
goto update_gpio_context_count;
@@ -1207,9 +1245,6 @@ static int omap_gpio_runtime_suspend(struct device *dev)
* non-wakeup GPIOs. Otherwise spurious IRQs will be
* generated. See OMAP2420 Errata item 1.101.
*/
- if (!(bank->enabled_non_wakeup_gpios))
- goto update_gpio_context_count;
-
bank->saved_datain = __raw_readl(bank->base +
bank->regs->datain);
l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
@@ -1246,7 +1281,19 @@ static int omap_gpio_runtime_resume(struct device *dev)
spin_lock_irqsave(&bank->lock, flags);
_gpio_dbck_enable(bank);
- if (!bank->enabled_non_wakeup_gpios || !bank->workaround_enabled) {
+
+ /*
+ * In ->runtime_suspend(), level-triggered, wakeup-enabled
+ * GPIOs were set to edge trigger also in order to be able to
+ * generate a PRCM wakeup. Here we restore the
+ * pre-runtime_suspend() values for edge triggering.
+ */
+ __raw_writel(bank->context.fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ __raw_writel(bank->context.risingdetect,
+ bank->base + bank->regs->risingdetect);
+
+ if (!bank->workaround_enabled) {
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
}
@@ -1397,11 +1444,95 @@ static const struct dev_pm_ops gpio_pm_ops = {
NULL)
};
+#if defined(CONFIG_OF)
+static struct omap_gpio_reg_offs omap2_gpio_regs = {
+ .revision = OMAP24XX_GPIO_REVISION,
+ .direction = OMAP24XX_GPIO_OE,
+ .datain = OMAP24XX_GPIO_DATAIN,
+ .dataout = OMAP24XX_GPIO_DATAOUT,
+ .set_dataout = OMAP24XX_GPIO_SETDATAOUT,
+ .clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT,
+ .irqstatus = OMAP24XX_GPIO_IRQSTATUS1,
+ .irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2,
+ .irqenable = OMAP24XX_GPIO_IRQENABLE1,
+ .irqenable2 = OMAP24XX_GPIO_IRQENABLE2,
+ .set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1,
+ .clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1,
+ .debounce = OMAP24XX_GPIO_DEBOUNCE_VAL,
+ .debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN,
+ .ctrl = OMAP24XX_GPIO_CTRL,
+ .wkup_en = OMAP24XX_GPIO_WAKE_EN,
+ .leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0,
+ .leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1,
+ .risingdetect = OMAP24XX_GPIO_RISINGDETECT,
+ .fallingdetect = OMAP24XX_GPIO_FALLINGDETECT,
+};
+
+static struct omap_gpio_reg_offs omap4_gpio_regs = {
+ .revision = OMAP4_GPIO_REVISION,
+ .direction = OMAP4_GPIO_OE,
+ .datain = OMAP4_GPIO_DATAIN,
+ .dataout = OMAP4_GPIO_DATAOUT,
+ .set_dataout = OMAP4_GPIO_SETDATAOUT,
+ .clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
+ .irqstatus = OMAP4_GPIO_IRQSTATUS0,
+ .irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
+ .irqenable = OMAP4_GPIO_IRQSTATUSSET0,
+ .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
+ .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
+ .clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0,
+ .debounce = OMAP4_GPIO_DEBOUNCINGTIME,
+ .debounce_en = OMAP4_GPIO_DEBOUNCENABLE,
+ .ctrl = OMAP4_GPIO_CTRL,
+ .wkup_en = OMAP4_GPIO_IRQWAKEN0,
+ .leveldetect0 = OMAP4_GPIO_LEVELDETECT0,
+ .leveldetect1 = OMAP4_GPIO_LEVELDETECT1,
+ .risingdetect = OMAP4_GPIO_RISINGDETECT,
+ .fallingdetect = OMAP4_GPIO_FALLINGDETECT,
+};
+
+static struct omap_gpio_platform_data omap2_pdata = {
+ .regs = &omap2_gpio_regs,
+ .bank_width = 32,
+ .dbck_flag = false,
+};
+
+static struct omap_gpio_platform_data omap3_pdata = {
+ .regs = &omap2_gpio_regs,
+ .bank_width = 32,
+ .dbck_flag = true,
+};
+
+static struct omap_gpio_platform_data omap4_pdata = {
+ .regs = &omap4_gpio_regs,
+ .bank_width = 32,
+ .dbck_flag = true,
+};
+
+static const struct of_device_id omap_gpio_match[] = {
+ {
+ .compatible = "ti,omap4-gpio",
+ .data = &omap4_pdata,
+ },
+ {
+ .compatible = "ti,omap3-gpio",
+ .data = &omap3_pdata,
+ },
+ {
+ .compatible = "ti,omap2-gpio",
+ .data = &omap2_pdata,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap_gpio_match);
+#endif
+
static struct platform_driver omap_gpio_driver = {
.probe = omap_gpio_probe,
.driver = {
.name = "omap_gpio",
.pm = &gpio_pm_ops,
+ .of_match_table = of_match_ptr(omap_gpio_match),
},
};
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 77c9cc70fa77..b4b5da4fd2cc 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -352,7 +352,12 @@ static int pl061_resume(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(pl061_dev_pm_ops, pl061_suspend, pl061_resume);
+static const struct dev_pm_ops pl061_dev_pm_ops = {
+ .suspend = pl061_suspend,
+ .resume = pl061_resume,
+ .freeze = pl061_suspend,
+ .restore = pl061_resume,
+};
#endif
static struct amba_id pl061_ids[] = {
diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c
new file mode 100644
index 000000000000..9ba15d31d242
--- /dev/null
+++ b/drivers/gpio/gpio-sodaville.c
@@ -0,0 +1,302 @@
+/*
+ * GPIO interface for Intel Sodaville SoCs.
+ *
+ * Copyright (c) 2010, 2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+#include <linux/basic_mmio_gpio.h>
+
+#define DRV_NAME "sdv_gpio"
+#define SDV_NUM_PUB_GPIOS 12
+#define PCI_DEVICE_ID_SDV_GPIO 0x2e67
+#define GPIO_BAR 0
+
+#define GPOUTR 0x00
+#define GPOER 0x04
+#define GPINR 0x08
+
+#define GPSTR 0x0c
+#define GPIT1R0 0x10
+#define GPIO_INT 0x14
+#define GPIT1R1 0x18
+
+#define GPMUXCTL 0x1c
+
+struct sdv_gpio_chip_data {
+ int irq_base;
+ void __iomem *gpio_pub_base;
+ struct irq_domain id;
+ struct irq_chip_generic *gc;
+ struct bgpio_chip bgpio;
+};
+
+static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct sdv_gpio_chip_data *sd = gc->private;
+ void __iomem *type_reg;
+ u32 irq_offs = d->irq - sd->irq_base;
+ u32 reg;
+
+ if (irq_offs < 8)
+ type_reg = sd->gpio_pub_base + GPIT1R0;
+ else
+ type_reg = sd->gpio_pub_base + GPIT1R1;
+
+ reg = readl(type_reg);
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ reg &= ~BIT(4 * (irq_offs % 8));
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ reg |= BIT(4 * (irq_offs % 8));
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ writel(reg, type_reg);
+ return 0;
+}
+
+static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data)
+{
+ struct sdv_gpio_chip_data *sd = data;
+ u32 irq_stat = readl(sd->gpio_pub_base + GPSTR);
+
+ irq_stat &= readl(sd->gpio_pub_base + GPIO_INT);
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ while (irq_stat) {
+ u32 irq_bit = __fls(irq_stat);
+
+ irq_stat &= ~BIT(irq_bit);
+ generic_handle_irq(sd->irq_base + irq_bit);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int sdv_xlate(struct irq_domain *h, struct device_node *node,
+ const u32 *intspec, u32 intsize, irq_hw_number_t *out_hwirq,
+ u32 *out_type)
+{
+ u32 line, type;
+
+ if (node != h->of_node)
+ return -EINVAL;
+
+ if (intsize < 2)
+ return -EINVAL;
+
+ line = *intspec;
+ *out_hwirq = line;
+
+ intspec++;
+ type = *intspec;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_LOW:
+ case IRQ_TYPE_LEVEL_HIGH:
+ *out_type = type;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static struct irq_domain_ops irq_domain_sdv_ops = {
+ .dt_translate = sdv_xlate,
+};
+
+static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd,
+ struct pci_dev *pdev)
+{
+ struct irq_chip_type *ct;
+ int ret;
+
+ sd->irq_base = irq_alloc_descs(-1, 0, SDV_NUM_PUB_GPIOS, -1);
+ if (sd->irq_base < 0)
+ return sd->irq_base;
+
+ /* mask + ACK all interrupt sources */
+ writel(0, sd->gpio_pub_base + GPIO_INT);
+ writel((1 << 11) - 1, sd->gpio_pub_base + GPSTR);
+
+ ret = request_irq(pdev->irq, sdv_gpio_pub_irq_handler, IRQF_SHARED,
+ "sdv_gpio", sd);
+ if (ret)
+ goto out_free_desc;
+
+ sd->id.irq_base = sd->irq_base;
+ sd->id.of_node = of_node_get(pdev->dev.of_node);
+ sd->id.ops = &irq_domain_sdv_ops;
+
+ /*
+ * This gpio irq controller latches level irqs. Testing shows that if
+ * we unmask & ACK the IRQ before the source of the interrupt is gone
+ * then the interrupt is active again.
+ */
+ sd->gc = irq_alloc_generic_chip("sdv-gpio", 1, sd->irq_base,
+ sd->gpio_pub_base, handle_fasteoi_irq);
+ if (!sd->gc) {
+ ret = -ENOMEM;
+ goto out_free_irq;
+ }
+
+ sd->gc->private = sd;
+ ct = sd->gc->chip_types;
+ ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
+ ct->regs.eoi = GPSTR;
+ ct->regs.mask = GPIO_INT;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_eoi = irq_gc_eoi;
+ ct->chip.irq_set_type = sdv_gpio_pub_set_type;
+
+ irq_setup_generic_chip(sd->gc, IRQ_MSK(SDV_NUM_PUB_GPIOS),
+ IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST,
+ IRQ_LEVEL | IRQ_NOPROBE);
+
+ irq_domain_add(&sd->id);
+ return 0;
+out_free_irq:
+ free_irq(pdev->irq, sd);
+out_free_desc:
+ irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS);
+ return ret;
+}
+
+static int __devinit sdv_gpio_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pci_id)
+{
+ struct sdv_gpio_chip_data *sd;
+ unsigned long addr;
+ const void *prop;
+ int len;
+ int ret;
+ u32 mux_val;
+
+ sd = kzalloc(sizeof(struct sdv_gpio_chip_data), GFP_KERNEL);
+ if (!sd)
+ return -ENOMEM;
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't enable device.\n");
+ goto done;
+ }
+
+ ret = pci_request_region(pdev, GPIO_BAR, DRV_NAME);
+ if (ret) {
+ dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
+ goto disable_pci;
+ }
+
+ addr = pci_resource_start(pdev, GPIO_BAR);
+ if (!addr)
+ goto release_reg;
+ sd->gpio_pub_base = ioremap(addr, pci_resource_len(pdev, GPIO_BAR));
+
+ prop = of_get_property(pdev->dev.of_node, "intel,muxctl", &len);
+ if (prop && len == 4) {
+ mux_val = of_read_number(prop, 1);
+ writel(mux_val, sd->gpio_pub_base + GPMUXCTL);
+ }
+
+ ret = bgpio_init(&sd->bgpio, &pdev->dev, 4,
+ sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR,
+ NULL, sd->gpio_pub_base + GPOER, NULL, false);
+ if (ret)
+ goto unmap;
+ sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS;
+
+ ret = gpiochip_add(&sd->bgpio.gc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "gpiochip_add() failed.\n");
+ goto unmap;
+ }
+
+ ret = sdv_register_irqsupport(sd, pdev);
+ if (ret)
+ goto unmap;
+
+ pci_set_drvdata(pdev, sd);
+ dev_info(&pdev->dev, "Sodaville GPIO driver registered.\n");
+ return 0;
+
+unmap:
+ iounmap(sd->gpio_pub_base);
+release_reg:
+ pci_release_region(pdev, GPIO_BAR);
+disable_pci:
+ pci_disable_device(pdev);
+done:
+ kfree(sd);
+ return ret;
+}
+
+static void sdv_gpio_remove(struct pci_dev *pdev)
+{
+ struct sdv_gpio_chip_data *sd = pci_get_drvdata(pdev);
+
+ irq_domain_del(&sd->id);
+ free_irq(pdev->irq, sd);
+ irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS);
+
+ if (gpiochip_remove(&sd->bgpio.gc))
+ dev_err(&pdev->dev, "gpiochip_remove() failed.\n");
+
+ pci_release_region(pdev, GPIO_BAR);
+ iounmap(sd->gpio_pub_base);
+ pci_disable_device(pdev);
+ kfree(sd);
+}
+
+static struct pci_device_id sdv_gpio_pci_ids[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SDV_GPIO) },
+ { 0, },
+};
+
+static struct pci_driver sdv_gpio_driver = {
+ .name = DRV_NAME,
+ .id_table = sdv_gpio_pci_ids,
+ .probe = sdv_gpio_probe,
+ .remove = sdv_gpio_remove,
+};
+
+static int __init sdv_gpio_init(void)
+{
+ return pci_register_driver(&sdv_gpio_driver);
+}
+module_init(sdv_gpio_init);
+
+static void __exit sdv_gpio_exit(void)
+{
+ pci_unregister_driver(&sdv_gpio_driver);
+}
+module_exit(sdv_gpio_exit);
+
+MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>");
+MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 094c5c4fd7f2..dce34727bbf8 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -54,7 +54,7 @@ static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset)
if (ret < 0)
return ret;
- return ret & mask;
+ return !!(ret & mask);
}
static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 6f17671260e1..32de6707e3c4 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -109,11 +109,13 @@ void tegra_gpio_enable(int gpio)
{
tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
}
+EXPORT_SYMBOL_GPL(tegra_gpio_enable);
void tegra_gpio_disable(int gpio)
{
tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
}
+EXPORT_SYMBOL_GPL(tegra_gpio_disable);
static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
@@ -459,7 +461,7 @@ static int __init tegra_gpio_init(void)
}
postcore_initcall(tegra_gpio_init);
-void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
+void tegra_gpio_config(struct tegra_gpio_table *table, int num)
{
int i;
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
index 91f45b965d1e..7eef648a3351 100644
--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@@ -69,6 +69,7 @@ static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset)
void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base)
{
int ret;
+ struct tps65910_board *board_data;
if (!gpio_base)
return;
@@ -80,10 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base)
switch(tps65910_chip_id(tps65910)) {
case TPS65910:
- tps65910->gpio.ngpio = 6;
+ tps65910->gpio.ngpio = TPS65910_NUM_GPIO;
break;
case TPS65911:
- tps65910->gpio.ngpio = 9;
+ tps65910->gpio.ngpio = TPS65911_NUM_GPIO;
break;
default:
return;
@@ -95,6 +96,21 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base)
tps65910->gpio.set = tps65910_gpio_set;
tps65910->gpio.get = tps65910_gpio_get;
+ /* Configure sleep control for gpios */
+ board_data = dev_get_platdata(tps65910->dev);
+ if (board_data) {
+ int i;
+ for (i = 0; i < tps65910->gpio.ngpio; ++i) {
+ if (board_data->en_gpio_sleep[i]) {
+ ret = tps65910_set_bits(tps65910,
+ TPS65910_GPIO0 + i, GPIO_SLEEP_MASK);
+ if (ret < 0)
+ dev_warn(tps65910->dev,
+ "GPIO Sleep setting failed\n");
+ }
+ }
+ }
+
ret = gpiochip_add(&tps65910->gpio);
if (ret)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 17fdf4b6af93..5a75510d66bb 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -58,6 +58,8 @@ struct gpio_desc {
#define FLAG_TRIG_FALL 5 /* trigger on falling edge */
#define FLAG_TRIG_RISE 6 /* trigger on rising edge */
#define FLAG_ACTIVE_LOW 7 /* sysfs value has active low */
+#define FLAG_OPEN_DRAIN 8 /* Gpio is open drain type */
+#define FLAG_OPEN_SOURCE 9 /* Gpio is open source type */
#define ID_SHIFT 16 /* add new flags before this one */
@@ -873,6 +875,7 @@ void gpio_unexport(unsigned gpio)
{
struct gpio_desc *desc;
int status = 0;
+ struct device *dev = NULL;
if (!gpio_is_valid(gpio)) {
status = -EINVAL;
@@ -884,19 +887,20 @@ void gpio_unexport(unsigned gpio)
desc = &gpio_desc[gpio];
if (test_bit(FLAG_EXPORT, &desc->flags)) {
- struct device *dev = NULL;
dev = class_find_device(&gpio_class, NULL, desc, match_export);
if (dev) {
gpio_setup_irq(desc, dev, 0);
clear_bit(FLAG_EXPORT, &desc->flags);
- put_device(dev);
- device_unregister(dev);
} else
status = -ENODEV;
}
mutex_unlock(&sysfs_lock);
+ if (dev) {
+ device_unregister(dev);
+ put_device(dev);
+ }
done:
if (status)
pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
@@ -1150,8 +1154,9 @@ EXPORT_SYMBOL_GPL(gpiochip_remove);
* non-zero, this function will return to the caller and not iterate over any
* more gpio_chips.
*/
-struct gpio_chip *gpiochip_find(void *data,
- int (*match)(struct gpio_chip *chip, void *data))
+struct gpio_chip *gpiochip_find(const void *data,
+ int (*match)(struct gpio_chip *chip,
+ const void *data))
{
struct gpio_chip *chip = NULL;
unsigned long flags;
@@ -1261,6 +1266,8 @@ void gpio_free(unsigned gpio)
module_put(desc->chip->owner);
clear_bit(FLAG_ACTIVE_LOW, &desc->flags);
clear_bit(FLAG_REQUESTED, &desc->flags);
+ clear_bit(FLAG_OPEN_DRAIN, &desc->flags);
+ clear_bit(FLAG_OPEN_SOURCE, &desc->flags);
} else
WARN_ON(extra_checks);
@@ -1282,6 +1289,12 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
if (err)
return err;
+ if (flags & GPIOF_OPEN_DRAIN)
+ set_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags);
+
+ if (flags & GPIOF_OPEN_SOURCE)
+ set_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags);
+
if (flags & GPIOF_DIR_IN)
err = gpio_direction_input(gpio);
else
@@ -1431,6 +1444,14 @@ int gpio_direction_output(unsigned gpio, int value)
struct gpio_desc *desc = &gpio_desc[gpio];
int status = -EINVAL;
+ /* Open drain pin should not be driven to 1 */
+ if (value && test_bit(FLAG_OPEN_DRAIN, &desc->flags))
+ return gpio_direction_input(gpio);
+
+ /* Open source pin should not be driven to 0 */
+ if (!value && test_bit(FLAG_OPEN_SOURCE, &desc->flags))
+ return gpio_direction_input(gpio);
+
spin_lock_irqsave(&gpio_lock, flags);
if (!gpio_is_valid(gpio))
@@ -1560,6 +1581,7 @@ int __gpio_get_value(unsigned gpio)
int value;
chip = gpio_to_chip(gpio);
+ /* Should be using gpio_get_value_cansleep() */
WARN_ON(chip->can_sleep);
value = chip->get ? chip->get(chip, gpio - chip->base) : 0;
trace_gpio_value(gpio, 1, value);
@@ -1567,6 +1589,57 @@ int __gpio_get_value(unsigned gpio)
}
EXPORT_SYMBOL_GPL(__gpio_get_value);
+/*
+ * _gpio_set_open_drain_value() - Set the open drain gpio's value.
+ * @gpio: Gpio whose state need to be set.
+ * @chip: Gpio chip.
+ * @value: Non-zero for setting it HIGH otherise it will set to LOW.
+ */
+static void _gpio_set_open_drain_value(unsigned gpio,
+ struct gpio_chip *chip, int value)
+{
+ int err = 0;
+ if (value) {
+ err = chip->direction_input(chip, gpio - chip->base);
+ if (!err)
+ clear_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags);
+ } else {
+ err = chip->direction_output(chip, gpio - chip->base, 0);
+ if (!err)
+ set_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags);
+ }
+ trace_gpio_direction(gpio, value, err);
+ if (err < 0)
+ pr_err("%s: Error in set_value for open drain gpio%d err %d\n",
+ __func__, gpio, err);
+}
+
+/*
+ * _gpio_set_open_source() - Set the open source gpio's value.
+ * @gpio: Gpio whose state need to be set.
+ * @chip: Gpio chip.
+ * @value: Non-zero for setting it HIGH otherise it will set to LOW.
+ */
+static void _gpio_set_open_source_value(unsigned gpio,
+ struct gpio_chip *chip, int value)
+{
+ int err = 0;
+ if (value) {
+ err = chip->direction_output(chip, gpio - chip->base, 1);
+ if (!err)
+ set_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags);
+ } else {
+ err = chip->direction_input(chip, gpio - chip->base);
+ if (!err)
+ clear_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags);
+ }
+ trace_gpio_direction(gpio, !value, err);
+ if (err < 0)
+ pr_err("%s: Error in set_value for open source gpio%d err %d\n",
+ __func__, gpio, err);
+}
+
+
/**
* __gpio_set_value() - assign a gpio's value
* @gpio: gpio whose value will be assigned
@@ -1581,9 +1654,15 @@ void __gpio_set_value(unsigned gpio, int value)
struct gpio_chip *chip;
chip = gpio_to_chip(gpio);
+ /* Should be using gpio_set_value_cansleep() */
WARN_ON(chip->can_sleep);
trace_gpio_value(gpio, 0, value);
- chip->set(chip, gpio - chip->base, value);
+ if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags))
+ _gpio_set_open_drain_value(gpio, chip, value);
+ else if (test_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags))
+ _gpio_set_open_source_value(gpio, chip, value);
+ else
+ chip->set(chip, gpio - chip->base, value);
}
EXPORT_SYMBOL_GPL(__gpio_set_value);
@@ -1650,7 +1729,12 @@ void gpio_set_value_cansleep(unsigned gpio, int value)
might_sleep_if(extra_checks);
chip = gpio_to_chip(gpio);
trace_gpio_value(gpio, 0, value);
- chip->set(chip, gpio - chip->base, value);
+ if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags))
+ _gpio_set_open_drain_value(gpio, chip, value);
+ else if (test_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags))
+ _gpio_set_open_source_value(gpio, chip, value);
+ else
+ chip->set(chip, gpio - chip->base, value);
}
EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index 7e62d15d60f6..bba81216b4db 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -78,8 +78,9 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname,
EXPORT_SYMBOL(of_get_named_gpio_flags);
/**
- * of_gpio_count - Count GPIOs for a device
+ * of_gpio_named_count - Count GPIOs for a device
* @np: device node to count GPIOs for
+ * @propname: property name containing gpio specifier(s)
*
* The function returns the count of GPIOs specified for a node.
*
@@ -93,14 +94,14 @@ EXPORT_SYMBOL(of_get_named_gpio_flags);
* defines four GPIOs (so this function will return 4), two of which
* are not specified.
*/
-unsigned int of_gpio_count(struct device_node *np)
+unsigned int of_gpio_named_count(struct device_node *np, const char* propname)
{
unsigned int cnt = 0;
do {
int ret;
- ret = of_parse_phandle_with_args(np, "gpios", "#gpio-cells",
+ ret = of_parse_phandle_with_args(np, propname, "#gpio-cells",
cnt, NULL);
/* A hole in the gpios = <> counts anyway. */
if (ret < 0 && ret != -EEXIST)
@@ -109,7 +110,7 @@ unsigned int of_gpio_count(struct device_node *np)
return cnt;
}
-EXPORT_SYMBOL(of_gpio_count);
+EXPORT_SYMBOL(of_gpio_named_count);
/**
* of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags
@@ -228,7 +229,7 @@ void of_gpiochip_remove(struct gpio_chip *chip)
}
/* Private function for resolving node pointer to gpio_chip */
-static int of_gpiochip_is_match(struct gpio_chip *chip, void *data)
+static int of_gpiochip_is_match(struct gpio_chip *chip, const void *data)
{
return chip->of_node == data;
}
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 1ff4e221cb4d..5f52690c3c8f 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -142,9 +142,9 @@ extern int __must_check gpiochip_reserve(int start, int ngpio);
/* add/remove chips */
extern int gpiochip_add(struct gpio_chip *chip);
extern int __must_check gpiochip_remove(struct gpio_chip *chip);
-extern struct gpio_chip *gpiochip_find(void *data,
+extern struct gpio_chip *gpiochip_find(const void *data,
int (*match)(struct gpio_chip *chip,
- void *data));
+ const void *data));
/* Always use the library code for GPIO management calls,
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index ed5a46707ad0..6155ecf192b0 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -14,6 +14,12 @@
#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+/* Gpio pin is open drain */
+#define GPIOF_OPEN_DRAIN (1 << 2)
+
+/* Gpio pin is open source */
+#define GPIOF_OPEN_SOURCE (1 << 3)
+
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index e34886397f90..1c6c2860d1a6 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -659,6 +659,8 @@
/*Register GPIO (0x80) register.RegisterDescription */
+#define GPIO_SLEEP_MASK 0x80
+#define GPIO_SLEEP_SHIFT 7
#define GPIO_DEB_MASK 0x10
#define GPIO_DEB_SHIFT 4
#define GPIO_PUEN_MASK 0x08
@@ -742,6 +744,11 @@
#define TPS65910_GPIO_STS BIT(1)
#define TPS65910_GPIO_SET BIT(0)
+/* Max number of TPS65910/11 GPIOs */
+#define TPS65910_NUM_GPIO 6
+#define TPS65911_NUM_GPIO 9
+#define TPS6591X_MAX_NUM_GPIO 9
+
/* Regulator Index Definitions */
#define TPS65910_REG_VRTC 0
#define TPS65910_REG_VIO 1
@@ -787,6 +794,7 @@ struct tps65910_board {
int irq_base;
int vmbch_threshold;
int vmbch2_threshold;
+ bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
};
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index b254052a49d7..81733d12cbea 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -50,7 +50,8 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
extern int of_get_named_gpio_flags(struct device_node *np,
const char *list_name, int index, enum of_gpio_flags *flags);
-extern unsigned int of_gpio_count(struct device_node *np);
+extern unsigned int of_gpio_named_count(struct device_node *np,
+ const char* propname);
extern int of_mm_gpiochip_add(struct device_node *np,
struct of_mm_gpio_chip *mm_gc);
@@ -71,7 +72,8 @@ static inline int of_get_named_gpio_flags(struct device_node *np,
return -ENOSYS;
}
-static inline unsigned int of_gpio_count(struct device_node *np)
+static inline unsigned int of_gpio_named_count(struct device_node *np,
+ const char* propname)
{
return 0;
}
@@ -88,6 +90,27 @@ static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
#endif /* CONFIG_OF_GPIO */
+/**
+ * of_gpio_count - Count GPIOs for a device
+ * @np: device node to count GPIOs for
+ *
+ * The function returns the count of GPIOs specified for a node.
+ *
+ * Note that the empty GPIO specifiers counts too. For example,
+ *
+ * gpios = <0
+ * &pio1 1 2
+ * 0
+ * &pio2 3 4>;
+ *
+ * defines four GPIOs (so this function will return 4), two of which
+ * are not specified.
+ */
+static inline unsigned int of_gpio_count(struct device_node *np)
+{
+ return of_gpio_named_count(np, "gpios");
+}
+
/**
* of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API
* @np: device node to get GPIO from