Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Pull i2c updates from Wolfram Sang:
 "I2C has the following updates for 3.16:

   - major cleanups to the rcar and sh_mobile drivers
   - removal of nuc900 driver which had a compile error for years
   - usual bunch of driver updates, bugfixes and cleanups"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
  i2c: pca954x: Fix compilation without CONFIG_GPIOLIB
  i2c: mux: pca954x: Use the descriptor-based GPIO API
  i2c: mpc: insert DR read in i2c_fixup()
  i2c: bfin: turn to Resource-managed API in probe function
  i2c: Make of_device_id array const
  i2c: remove unnecessary OOM messages
  i2c: designware-pci: Add Haswell PCI IDs
  i2c: designware: Add runtime PM hooks
  i2c: designware: Disable device on system suspend
  i2c: nuc900: remove driver
  i2c: imx: update i2c clock divider for each transaction
  i2c: imx: fix the i2c bus hang issue when do repeat restart
  i2c: rcar: update copyright and license information
  i2c: rcar: janitorial cleanup after refactoring
  i2c: rcar: reuse status bits as enable bits
  i2c: rcar: remove spinlock
  i2c: rcar: refactor status bit handling
  i2c: rcar: refactor setting up msg
  i2c: rcar: check bus free before first message
  i2c: rcar: refactor irq state machine
  ...

Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt

@@ -8,6 +8,12 @@ the standard I2C multi-master rules.  Using GPIOs is generally useful in
 the case where there is a device on the bus that has errata and/or bugs
 that makes standard multimaster mode not feasible.
 
+Note that this scheme works well enough but has some downsides:
+* It is nonstandard (not using standard I2C multimaster)
+* Having two masters on a bus in general makes it relatively hard to debug
+  problems (hard to tell if i2c issues were caused by one master, another, or
+  some device on the bus).
+
 
 Algorithm:
 

Documentation/devicetree/bindings/i2c/i2c-exynos5.txt

@@ -5,7 +5,14 @@ at various speeds ranging from 100khz to 3.4Mhz.
 
 Required properties:
   - compatible: value should be.
-      -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.
+	-> "samsung,exynos5-hsi2c", (DEPRECATED)
+				for i2c compatible with HSI2C available
+				on Exynos5250 and Exynos5420 SoCs.
+	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
+				on Exynos5250 and Exynos5420 SoCs.
+	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
+				on Exynos5260 SoCs.
+
   - reg: physical base address of the controller and length of memory mapped
     region.
   - interrupts: interrupt number to the cpu.
@@ -26,7 +33,7 @@ Optional properties:
 Example:
 
 hsi2c@12ca0000 {
-	compatible = "samsung,exynos5-hsi2c";
+	compatible = "samsung,exynos5250-hsi2c";
 	reg = <0x12ca0000 0x100>;
 	interrupts = <56>;
 	clock-frequency = <100000>;

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -5,7 +5,7 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be either:
-                     - "allwinner,sun4i-i2c"
+                     - "allwinner,sun4i-a10-i2c"
                      - "allwinner,sun6i-a31-i2c"
                      - "marvell,mv64xxx-i2c"
                      - "marvell,mv78230-i2c"

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -7,6 +7,9 @@ Required properties:
 	"renesas,i2c-r8a7779"
 	"renesas,i2c-r8a7790"
 	"renesas,i2c-r8a7791"
+	"renesas,i2c-r8a7792"
+	"renesas,i2c-r8a7793"
+	"renesas,i2c-r8a7794"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: interrupt specifier.

Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt

@@ -0,0 +1,26 @@
+Device tree configuration for Renesas IIC (sh_mobile) driver
+
+Required properties:
+- compatible      : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback
+- reg             : address start and address range size of device
+- interrupts      : interrupt of device
+- clocks          : clock for device
+- #address-cells  : should be <1>
+- #size-cells     : should be <0>
+
+Optional properties:
+- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+	iic0: i2c@e6500000 {
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		clock-frequency = <400000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -713,7 +713,7 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&apb1_gates 0>;
@@ -724,7 +724,7 @@
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&apb1_gates 1>;
@@ -735,7 +735,7 @@
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&apb1_gates 2>;

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -560,7 +560,7 @@
 		i2c0: i2c@01c2ac00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&apb1_gates 0>;
@@ -571,7 +571,7 @@
 		i2c1: i2c@01c2b000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&apb1_gates 1>;
@@ -582,7 +582,7 @@
 		i2c2: i2c@01c2b400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&apb1_gates 2>;

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -486,7 +486,7 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&apb1_gates 0>;
@@ -497,7 +497,7 @@
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&apb1_gates 1>;
@@ -508,7 +508,7 @@
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&apb1_gates 2>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -863,7 +863,7 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <0 7 4>;
 			clocks = <&apb1_gates 0>;
@@ -874,7 +874,7 @@
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <0 8 4>;
 			clocks = <&apb1_gates 1>;
@@ -885,7 +885,7 @@
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <0 9 4>;
 			clocks = <&apb1_gates 2>;
@@ -896,7 +896,7 @@
 		};
 
 		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <0 88 4>;
 			clocks = <&apb1_gates 3>;
@@ -907,7 +907,7 @@
 		};
 
 		i2c4: i2c@01c2c000 {
-			compatible = "allwinner,sun4i-i2c";
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2c000 0x400>;
 			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;

drivers/i2c/busses/Kconfig

@@ -449,7 +449,7 @@ config I2C_EFM32
 
 config I2C_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	help
 	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
 	  is an IOH(Input/Output Hub) for x86 embedded processor.
@@ -570,13 +570,6 @@ config I2C_NOMADIK
 	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
 	  as well as the STA2X11 PCIe I/O HUB.
 
-config I2C_NUC900
-	tristate "NUC900 I2C Driver"
-	depends on ARCH_W90X900
-	help
-	  Say Y here to include support for I2C controller in the
-	  Winbond/Nuvoton NUC900 based System-on-Chip devices.
-
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
 	help

drivers/i2c/busses/Makefile

@@ -55,7 +55,6 @@ obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
 obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
-obj-$(CONFIG_I2C_NUC900)	+= i2c-nuc900.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o

drivers/i2c/busses/i2c-ali1563.c

@@ -63,7 +63,7 @@
 static struct pci_driver ali1563_pci_driver;
 static unsigned short ali1563_smba;
 
-static int ali1563_transaction(struct i2c_adapter * a, int size)
+static int ali1563_transaction(struct i2c_adapter *a, int size)
 {
 	u32 data;
 	int timeout;
@@ -78,7 +78,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
 	data = inb_p(SMB_HST_STS);
 	if (data & HST_STS_BAD) {
 		dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
-		outb_p(data | HST_STS_BAD,SMB_HST_STS);
+		outb_p(data | HST_STS_BAD, SMB_HST_STS);
 		data = inb_p(SMB_HST_STS);
 		if (data & HST_STS_BAD)
 			return -EBUSY;
@@ -102,10 +102,10 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
 	if (!timeout) {
 		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
 		/* Issue 'kill' to host controller */
-		outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
+		outb_p(HST_CNTL2_KILL, SMB_HST_CNTL2);
 		data = inb_p(SMB_HST_STS);
 		status = -ETIMEDOUT;
- 	}
+	}
 
 	/* device error - no response, ignore the autodetection case */
 	if (data & HST_STS_DEVERR) {
@@ -117,18 +117,18 @@ static int ali1563_transaction(struct i2c_adapter * a, int size)
 	if (data & HST_STS_BUSERR) {
 		dev_err(&a->dev, "Bus collision!\n");
 		/* Issue timeout, hoping it helps */
-		outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+		outb_p(HST_CNTL1_TIMEOUT, SMB_HST_CNTL1);
 	}
 
 	if (data & HST_STS_FAIL) {
 		dev_err(&a->dev, "Cleaning fail after KILL!\n");
-		outb_p(0x0,SMB_HST_CNTL2);
+		outb_p(0x0, SMB_HST_CNTL2);
 	}
 
 	return status;
 }
 
-static int ali1563_block_start(struct i2c_adapter * a)
+static int ali1563_block_start(struct i2c_adapter *a)
 {
 	u32 data;
 	int timeout;
@@ -142,8 +142,8 @@ static int ali1563_block_start(struct i2c_adapter * a)
 
 	data = inb_p(SMB_HST_STS);
 	if (data & HST_STS_BAD) {
-		dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+		dev_warn(&a->dev, "ali1563: Trying to reset busy device\n");
-		outb_p(data | HST_STS_BAD,SMB_HST_STS);
+		outb_p(data | HST_STS_BAD, SMB_HST_STS);
 		data = inb_p(SMB_HST_STS);
 		if (data & HST_STS_BAD)
 			return -EBUSY;
@@ -184,13 +184,14 @@ static int ali1563_block_start(struct i2c_adapter * a)
 	return status;
 }
 
-static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
+static int ali1563_block(struct i2c_adapter *a,
+			 union i2c_smbus_data *data, u8 rw)
 {
 	int i, len;
 	int error = 0;
 
 	/* Do we need this? */
-	outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
+	outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
 
 	if (rw == I2C_SMBUS_WRITE) {
 		len = data->block[0];
@@ -198,8 +199,8 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8
 			len = 1;
 		else if (len > 32)
 			len = 32;
-		outb_p(len,SMB_HST_DAT0);
+		outb_p(len, SMB_HST_DAT0);
-		outb_p(data->block[1],SMB_BLK_DAT);
+		outb_p(data->block[1], SMB_BLK_DAT);
 	} else
 		len = 32;
 
@@ -208,10 +209,12 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8
 	for (i = 0; i < len; i++) {
 		if (rw == I2C_SMBUS_WRITE) {
 			outb_p(data->block[i + 1], SMB_BLK_DAT);
-			if ((error = ali1563_block_start(a)))
+			error = ali1563_block_start(a);
+			if (error)
 				break;
 		} else {
-			if ((error = ali1563_block_start(a)))
+			error = ali1563_block_start(a);
+			if (error)
 				break;
 			if (i == 0) {
 				len = inb_p(SMB_HST_DAT0);
@@ -224,25 +227,26 @@ static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8
 		}
 	}
 	/* Do we need this? */
-	outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
+	outb_p(HST_CNTL1_LAST, SMB_HST_CNTL1);
 	return error;
 }
 
-static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
+static s32 ali1563_access(struct i2c_adapter *a, u16 addr,
 			  unsigned short flags, char rw, u8 cmd,
-			  int size, union i2c_smbus_data * data)
+			  int size, union i2c_smbus_data *data)
 {
 	int error = 0;
 	int timeout;
 	u32 reg;
 
 	for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
-		if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY))
+		reg = inb_p(SMB_HST_STS);
+		if (!(reg & HST_STS_BUSY))
 			break;
 	}
 	if (!timeout)
-		dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg);
+		dev_warn(&a->dev, "SMBus not idle. HST_STS = %02x\n", reg);
-	outb_p(0xff,SMB_HST_STS);
+	outb_p(0xff, SMB_HST_STS);
 
 	/* Map the size to what the chip understands */
 	switch (size) {
@@ -268,13 +272,14 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	}
 
 	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
-	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
+	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) |
+	       (size << 3), SMB_HST_CNTL2);
 
 	/* Write the command register */
 
-	switch(size) {
+	switch (size) {
 	case HST_CNTL2_BYTE:
-		if (rw== I2C_SMBUS_WRITE)
+		if (rw == I2C_SMBUS_WRITE)
 			/* Beware it uses DAT0 register and not CMD! */
 			outb_p(cmd, SMB_HST_DAT0);
 		break;
@@ -292,11 +297,12 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 		break;
 	case HST_CNTL2_BLOCK:
 		outb_p(cmd, SMB_HST_CMD);
-		error = ali1563_block(a,data,rw);
+		error = ali1563_block(a, data, rw);
 		goto Done;
 	}
 
-	if ((error = ali1563_transaction(a, size)))
+	error = ali1563_transaction(a, size);
+	if (error)
 		goto Done;
 
 	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
@@ -317,7 +323,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	return error;
 }
 
-static u32 ali1563_func(struct i2c_adapter * a)
+static u32 ali1563_func(struct i2c_adapter *a)
 {
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
@@ -329,13 +335,13 @@ static int ali1563_setup(struct pci_dev *dev)
 {
 	u16 ctrl;
 
-	pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
+	pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
 
 	/* SMB I/O Base in high 12 bits and must be aligned with the
 	 * size of the I/O space. */
 	ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
 	if (!ali1563_smba) {
-		dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
+		dev_warn(&dev->dev, "ali1563_smba Uninitialized\n");
 		goto Err;
 	}
 
@@ -350,8 +356,8 @@ static int ali1563_setup(struct pci_dev *dev)
 				      ctrl | ALI1563_SMB_IOEN);
 		pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
 		if (!(ctrl & ALI1563_SMB_IOEN)) {
-			dev_err(&dev->dev, "I/O space still not enabled, "
+			dev_err(&dev->dev,
-				"giving up\n");
+				"I/O space still not enabled, giving up\n");
 			goto Err;
 		}
 	}
@@ -375,7 +381,7 @@ static int ali1563_setup(struct pci_dev *dev)
 
 static void ali1563_shutdown(struct pci_dev *dev)
 {
-	release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
+	release_region(ali1563_smba, ALI1563_SMB_IOSIZE);
 }
 
 static const struct i2c_algorithm ali1563_algorithm = {
@@ -394,12 +400,14 @@ static int ali1563_probe(struct pci_dev *dev,
 {
 	int error;
 
-	if ((error = ali1563_setup(dev)))
+	error = ali1563_setup(dev);
+	if (error)
 		goto exit;
 	ali1563_adapter.dev.parent = &dev->dev;
 	snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
 		 "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
-	if ((error = i2c_add_adapter(&ali1563_adapter)))
+	error = i2c_add_adapter(&ali1563_adapter);
+	if (error)
 		goto exit_shutdown;
 	return 0;
 
@@ -421,12 +429,12 @@ static const struct pci_device_id ali1563_id_table[] = {
 	{},
 };
 
-MODULE_DEVICE_TABLE (pci, ali1563_id_table);
+MODULE_DEVICE_TABLE(pci, ali1563_id_table);
 
 static struct pci_driver ali1563_pci_driver = {
- 	.name		= "ali1563_smbus",
+	.name		= "ali1563_smbus",
 	.id_table	= ali1563_id_table,
- 	.probe		= ali1563_probe,
+	.probe		= ali1563_probe,
 	.remove		= ali1563_remove,
 };
 

drivers/i2c/busses/i2c-bcm2835.c

@@ -225,10 +225,8 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
-	if (!i2c_dev) {
+	if (!i2c_dev)
-		dev_err(&pdev->dev, "Cannot allocate i2c_dev\n");
 		return -ENOMEM;
-	}
 	platform_set_drvdata(pdev, i2c_dev);
 	i2c_dev->dev = &pdev->dev;
 	init_completion(&i2c_dev->completion);

drivers/i2c/busses/i2c-bfin-twi.c

@@ -620,35 +620,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	int rc;
 	unsigned int clkhilow;
 
-	iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
+	iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
+			GFP_KERNEL);
 	if (!iface) {
 		dev_err(&pdev->dev, "Cannot allocate memory\n");
-		rc = -ENOMEM;
+		return -ENOMEM;
-		goto out_error_nomem;
 	}
 
 	spin_lock_init(&(iface->lock));
 
 	/* Find and map our resources */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
+	iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
-		dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+	if (IS_ERR(iface->regs_base)) {
-		rc = -ENOENT;
-		goto out_error_get_res;
-	}
-
-	iface->regs_base = ioremap(res->start, resource_size(res));
-	if (iface->regs_base == NULL) {
 		dev_err(&pdev->dev, "Cannot map IO\n");
-		rc = -ENXIO;
+		return PTR_ERR(iface->regs_base);
-		goto out_error_ioremap;
 	}
 
 	iface->irq = platform_get_irq(pdev, 0);
 	if (iface->irq < 0) {
 		dev_err(&pdev->dev, "No IRQ specified\n");
-		rc = -ENOENT;
+		return -ENOENT;
-		goto out_error_no_irq;
 	}
 
 	p_adap = &iface->adap;
@@ -666,15 +658,15 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 			"i2c-bfin-twi");
 	if (rc) {
 		dev_err(&pdev->dev, "Can't setup pin mux!\n");
-		goto out_error_pin_mux;
+		return -EBUSY;
 	}
 
-	rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+	rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
 		0, pdev->name, iface);
 	if (rc) {
 		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
 		rc = -ENODEV;
-		goto out_error_req_irq;
+		goto out_error;
 	}
 
 	/* Set TWI internal clock as 10MHz */
@@ -695,7 +687,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	rc = i2c_add_numbered_adapter(p_adap);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Can't add i2c adapter!\n");
-		goto out_error_add_adapter;
+		goto out_error;
 	}
 
 	platform_set_drvdata(pdev, iface);
@@ -705,17 +697,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_error_add_adapter:
+out_error:
-	free_irq(iface->irq, iface);
-out_error_req_irq:
-out_error_no_irq:
 	peripheral_free_list(dev_get_platdata(&pdev->dev));
-out_error_pin_mux:
-	iounmap(iface->regs_base);
-out_error_ioremap:
-out_error_get_res:
-	kfree(iface);
-out_error_nomem:
 	return rc;
 }
 
@@ -724,10 +707,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
 	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&(iface->adap));
-	free_irq(iface->irq, iface);
 	peripheral_free_list(dev_get_platdata(&pdev->dev));
-	iounmap(iface->regs_base);
-	kfree(iface);
 
 	return 0;
 }

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -56,6 +56,7 @@ enum dw_pci_ctl_id_t {
 	medfield_5,
 
 	baytrail,
+	haswell,
 };
 
 struct dw_scl_sda_cfg {
@@ -95,6 +96,15 @@ static struct dw_scl_sda_cfg byt_config = {
 	.sda_hold = 0x6,
 };
 
+/* Haswell HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg hsw_config = {
+	.ss_hcnt = 0x01b0,
+	.fs_hcnt = 0x48,
+	.ss_lcnt = 0x01fb,
+	.fs_lcnt = 0xa0,
+	.sda_hold = 0x9,
+};
+
 static struct  dw_pci_controller  dw_pci_controllers[] = {
 	[moorestown_0] = {
 		.bus_num     = 0,
@@ -168,6 +178,15 @@ static struct  dw_pci_controller  dw_pci_controllers[] = {
 		.functionality = I2C_FUNC_10BIT_ADDR,
 		.scl_sda_cfg = &byt_config,
 	},
+	[haswell] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.clk_khz = 100000,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &hsw_config,
+	},
 };
 static struct i2c_algorithm i2c_dw_algo = {
 	.master_xfer	= i2c_dw_xfer,
@@ -328,6 +347,9 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
 	{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
 	{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
+	/* Haswell */
+	{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
+	{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -247,12 +247,13 @@ static const struct of_device_id dw_i2c_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #endif
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 static int dw_i2c_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
+	i2c_dw_disable(i_dev);
 	clk_disable_unprepare(i_dev->clk);
 
 	return 0;
@@ -268,13 +269,11 @@ static int dw_i2c_resume(struct device *dev)
 
 	return 0;
 }
-
-static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
-#define DW_I2C_DEV_PM_OPS	(&dw_i2c_dev_pm_ops)
-#else
-#define DW_I2C_DEV_PM_OPS	NULL
 #endif
 
+static UNIVERSAL_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend,
+			    dw_i2c_resume, NULL);
+
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
 
@@ -286,7 +285,7 @@ static struct platform_driver dw_i2c_driver = {
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(dw_i2c_of_match),
 		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
-		.pm	= DW_I2C_DEV_PM_OPS,
+		.pm	= &dw_i2c_dev_pm_ops,
 	},
 };
 

drivers/i2c/busses/i2c-diolan-u2c.c

@@ -455,7 +455,6 @@ static int diolan_u2c_probe(struct usb_interface *interface,
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
-		dev_err(&interface->dev, "no memory for device state\n");
 		ret = -ENOMEM;
 		goto error;
 	}

drivers/i2c/busses/i2c-efm32.c

@@ -320,10 +320,8 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata) {
+	if (!ddata)
-		dev_dbg(&pdev->dev, "failed to allocate private data\n");
 		return -ENOMEM;
-	}
 	platform_set_drvdata(pdev, ddata);
 
 	init_completion(&ddata->done);

drivers/i2c/busses/i2c-eg20t.c

@@ -751,10 +751,8 @@ static int pch_i2c_probe(struct pci_dev *pdev,
 	pch_pci_dbg(pdev, "Entered.\n");
 
 	adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL);
-	if (adap_info == NULL) {
+	if (adap_info == NULL)
-		pch_pci_err(pdev, "Memory allocation FAILED\n");
 		return -ENOMEM;
-	}
 
 	ret = pci_enable_device(pdev);
 	if (ret) {

drivers/i2c/busses/i2c-exynos5.c

@@ -76,12 +76,6 @@
 #define HSI2C_RXFIFO_TRIGGER_LEVEL(x)		((x) << 4)
 #define HSI2C_TXFIFO_TRIGGER_LEVEL(x)		((x) << 16)
 
-/* As per user manual FIFO max depth is 64bytes */
-#define HSI2C_FIFO_MAX				0x40
-/* default trigger levels for Tx and Rx FIFOs */
-#define HSI2C_DEF_TXFIFO_LVL			(HSI2C_FIFO_MAX - 0x30)
-#define HSI2C_DEF_RXFIFO_LVL			(HSI2C_FIFO_MAX - 0x10)
-
 /* I2C_TRAILING_CTL Register bits */
 #define HSI2C_TRAILING_COUNT			(0xf)
 
@@ -183,14 +177,54 @@ struct exynos5_i2c {
 	 * 2. Fast speed upto 1Mbps
 	 */
 	int			speed_mode;
+
+	/* Version of HS-I2C Hardware */
+	struct exynos_hsi2c_variant	*variant;
+};
+
+/**
+ * struct exynos_hsi2c_variant - platform specific HSI2C driver data
+ * @fifo_depth: the fifo depth supported by the HSI2C module
+ *
+ * Specifies platform specific configuration of HSI2C module.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
+ */
+struct exynos_hsi2c_variant {
+	unsigned int	fifo_depth;
+};
+
+static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = {
+	.fifo_depth	= 64,
+};
+
+static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = {
+	.fifo_depth	= 16,
 };
 
 static const struct of_device_id exynos5_i2c_match[] = {
-	{ .compatible = "samsung,exynos5-hsi2c" },
+	{
-	{},
+		.compatible = "samsung,exynos5-hsi2c",
+		.data = &exynos5250_hsi2c_data
+	}, {
+		.compatible = "samsung,exynos5250-hsi2c",
+		.data = &exynos5250_hsi2c_data
+	}, {
+		.compatible = "samsung,exynos5260-hsi2c",
+		.data = &exynos5260_hsi2c_data
+	}, {},
 };
 MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
 
+static inline struct exynos_hsi2c_variant *exynos5_i2c_get_variant
+					(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+
+	match = of_match_node(exynos5_i2c_match, pdev->dev.of_node);
+	return (struct exynos_hsi2c_variant *)match->data;
+}
+
 static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
 {
 	writel(readl(i2c->regs + HSI2C_INT_STATUS),
@@ -415,7 +449,7 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
 		fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
 		fifo_level = HSI2C_TX_FIFO_LVL(fifo_status);
 
-		len = HSI2C_FIFO_MAX - fifo_level;
+		len = i2c->variant->fifo_depth - fifo_level;
 		if (len > (i2c->msg->len - i2c->msg_ptr))
 			len = i2c->msg->len - i2c->msg_ptr;
 
@@ -483,6 +517,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
 	u32 i2c_auto_conf = 0;
 	u32 fifo_ctl;
 	unsigned long flags;
+	unsigned short trig_lvl;
 
 	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
 	i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
@@ -493,13 +528,19 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
 
 		i2c_auto_conf = HSI2C_READ_WRITE;
 
-		fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL);
+		trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
+			(i2c->variant->fifo_depth * 3 / 4) : i2c->msg->len;
+		fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(trig_lvl);
+
 		int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
 			HSI2C_INT_TRAILING_EN);
 	} else {
 		i2c_ctl |= HSI2C_TXCHON;
 
-		fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL);
+		trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
+			(i2c->variant->fifo_depth * 1 / 4) : i2c->msg->len;
+		fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(trig_lvl);
+
 		int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
 	}
 
@@ -621,10 +662,8 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	int ret;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
-	if (!i2c) {
+	if (!i2c)
-		dev_err(&pdev->dev, "no memory for state\n");
 		return -ENOMEM;
-	}
 
 	if (of_property_read_u32(np, "clock-frequency", &op_clock)) {
 		i2c->speed_mode = HSI2C_FAST_SPD;
@@ -691,7 +730,9 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clk;
 
-	exynos5_i2c_init(i2c);
+	i2c->variant = exynos5_i2c_get_variant(pdev);
+
+	exynos5_i2c_reset(i2c);
 
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0) {

drivers/i2c/busses/i2c-gpio.c

@@ -147,24 +147,22 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 		scl_pin = pdata->scl_pin;
 	}
 
-	ret = gpio_request(sda_pin, "sda");
+	ret = devm_gpio_request(&pdev->dev, sda_pin, "sda");
 	if (ret) {
 		if (ret == -EINVAL)
 			ret = -EPROBE_DEFER;	/* Try again later */
-		goto err_request_sda;
+		return ret;
 	}
-	ret = gpio_request(scl_pin, "scl");
+	ret = devm_gpio_request(&pdev->dev, scl_pin, "scl");
 	if (ret) {
 		if (ret == -EINVAL)
 			ret = -EPROBE_DEFER;	/* Try again later */
-		goto err_request_scl;
+		return ret;
 	}
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
+	if (!priv)
-		ret = -ENOMEM;
+		return -ENOMEM;
-		goto err_add_bus;
-	}
 	adap = &priv->adap;
 	bit_data = &priv->bit_data;
 	pdata = &priv->pdata;
@@ -225,7 +223,7 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 	adap->nr = pdev->id;
 	ret = i2c_bit_add_numbered_bus(adap);
 	if (ret)
-		goto err_add_bus;
+		return ret;
 
 	platform_set_drvdata(pdev, priv);
 
@@ -235,13 +233,6 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 		 ? ", no clock stretching" : "");
 
 	return 0;
-
-err_add_bus:
-	gpio_free(scl_pin);
-err_request_scl:
-	gpio_free(sda_pin);
-err_request_sda:
-	return ret;
 }
 
 static int i2c_gpio_remove(struct platform_device *pdev)
@@ -255,8 +246,6 @@ static int i2c_gpio_remove(struct platform_device *pdev)
 	pdata = &priv->pdata;
 
 	i2c_del_adapter(adap);
-	gpio_free(pdata->scl_pin);
-	gpio_free(pdata->sda_pin);
 
 	return 0;
 }

drivers/i2c/busses/i2c-imx.c

@@ -183,6 +183,8 @@ struct imx_i2c_struct {
 	unsigned int 		disable_delay;
 	int			stopped;
 	unsigned int		ifdr; /* IMX_I2C_IFDR */
+	unsigned int		cur_clk;
+	unsigned int		bitrate;
 	const struct imx_i2c_hwdata	*hwdata;
 };
 
@@ -305,6 +307,48 @@ static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
 	return 0;
 }
 
+static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
+{
+	struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
+	unsigned int i2c_clk_rate;
+	unsigned int div;
+	int i;
+
+	/* Divider value calculation */
+	i2c_clk_rate = clk_get_rate(i2c_imx->clk);
+	if (i2c_imx->cur_clk == i2c_clk_rate)
+		return;
+	else
+		i2c_imx->cur_clk = i2c_clk_rate;
+
+	div = (i2c_clk_rate + i2c_imx->bitrate - 1) / i2c_imx->bitrate;
+	if (div < i2c_clk_div[0].div)
+		i = 0;
+	else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
+		i = i2c_imx->hwdata->ndivs - 1;
+	else
+		for (i = 0; i2c_clk_div[i].div < div; i++);
+
+	/* Store divider value */
+	i2c_imx->ifdr = i2c_clk_div[i].val;
+
+	/*
+	 * There dummy delay is calculated.
+	 * It should be about one I2C clock period long.
+	 * This delay is used in I2C bus disable function
+	 * to fix chip hardware bug.
+	 */
+	i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
+		+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
+
+#ifdef CONFIG_I2C_DEBUG_BUS
+	dev_dbg(&i2c_imx->adapter.dev, "I2C_CLK=%d, REQ DIV=%d\n",
+		i2c_clk_rate, div);
+	dev_dbg(&i2c_imx->adapter.dev, "IFDR[IC]=0x%x, REAL DIV=%d\n",
+		i2c_clk_div[i].val, i2c_clk_div[i].div);
+#endif
+}
+
 static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 {
 	unsigned int temp = 0;
@@ -312,6 +356,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
+	i2c_imx_set_clk(i2c_imx);
+
 	result = clk_prepare_enable(i2c_imx->clk);
 	if (result)
 		return result;
@@ -367,45 +413,6 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 	clk_disable_unprepare(i2c_imx->clk);
 }
 
-static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
-							unsigned int rate)
-{
-	struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
-	unsigned int i2c_clk_rate;
-	unsigned int div;
-	int i;
-
-	/* Divider value calculation */
-	i2c_clk_rate = clk_get_rate(i2c_imx->clk);
-	div = (i2c_clk_rate + rate - 1) / rate;
-	if (div < i2c_clk_div[0].div)
-		i = 0;
-	else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
-		i = i2c_imx->hwdata->ndivs - 1;
-	else
-		for (i = 0; i2c_clk_div[i].div < div; i++);
-
-	/* Store divider value */
-	i2c_imx->ifdr = i2c_clk_div[i].val;
-
-	/*
-	 * There dummy delay is calculated.
-	 * It should be about one I2C clock period long.
-	 * This delay is used in I2C bus disable function
-	 * to fix chip hardware bug.
-	 */
-	i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
-		+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
-
-	/* dev_dbg() can't be used, because adapter is not yet registered */
-#ifdef CONFIG_I2C_DEBUG_BUS
-	dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
-		__func__, i2c_clk_rate, div);
-	dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
-		__func__, i2c_clk_div[i].val, i2c_clk_div[i].div);
-#endif
-}
-
 static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 {
 	struct imx_i2c_struct *i2c_imx = dev_id;
@@ -458,10 +465,11 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 	return 0;
 }
 
-static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
+static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bool is_lastmsg)
 {
 	int i, result;
 	unsigned int temp;
+	int block_data = msgs->flags & I2C_M_RECV_LEN;
 
 	dev_dbg(&i2c_imx->adapter.dev,
 		"<%s> write slave address: addr=0x%x\n",
@@ -481,7 +489,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 	/* setup bus to read data */
 	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 	temp &= ~I2CR_MTX;
-	if (msgs->len - 1)
+
+	/*
+	 * Reset the I2CR_TXAK flag initially for SMBus block read since the
+	 * length is unknown
+	 */
+	if ((msgs->len - 1) || block_data)
 		temp &= ~I2CR_TXAK;
 	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
@@ -490,19 +503,49 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 
 	/* read data */
 	for (i = 0; i < msgs->len; i++) {
+		u8 len = 0;
 		result = i2c_imx_trx_complete(i2c_imx);
 		if (result)
 			return result;
-		if (i == (msgs->len - 1)) {
+		/*
-			/* It must generate STOP before read I2DR to prevent
+		 * First byte is the length of remaining packet
-			   controller from generating another clock cycle */
+		 * in the SMBus block data read. Add it to
+		 * msgs->len.
+		 */
+		if ((!i) && block_data) {
+			len = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+			if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX))
+				return -EPROTO;
 			dev_dbg(&i2c_imx->adapter.dev,
-				"<%s> clear MSTA\n", __func__);
+				"<%s> read length: 0x%X\n",
-			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				__func__, len);
-			temp &= ~(I2CR_MSTA | I2CR_MTX);
+			msgs->len += len;
-			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+		}
-			i2c_imx_bus_busy(i2c_imx, 0);
+		if (i == (msgs->len - 1)) {
-			i2c_imx->stopped = 1;
+			if (is_lastmsg) {
+				/*
+				 * It must generate STOP before read I2DR to prevent
+				 * controller from generating another clock cycle
+				 */
+				dev_dbg(&i2c_imx->adapter.dev,
+					"<%s> clear MSTA\n", __func__);
+				temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
+				temp &= ~(I2CR_MSTA | I2CR_MTX);
+				imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+				i2c_imx_bus_busy(i2c_imx, 0);
+				i2c_imx->stopped = 1;
+			} else {
+				/*
+				 * For i2c master receiver repeat restart operation like:
+				 * read -> repeat MSTA -> read/write
+				 * The controller must set MTX before read the last byte in
+				 * the first read operation, otherwise the first read cost
+				 * one extra clock cycle.
+				 */
+				temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+				temp |= I2CR_MTX;
+				writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+			}
 		} else if (i == (msgs->len - 2)) {
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> set TXAK\n", __func__);
@@ -510,7 +553,10 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 			temp |= I2CR_TXAK;
 			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 		}
-		msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+		if ((!i) && block_data)
+			msgs->buf[0] = len;
+		else
+			msgs->buf[i] =  imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
 		dev_dbg(&i2c_imx->adapter.dev,
 			"<%s> read byte: B%d=0x%X\n",
 			__func__, i, msgs->buf[i]);
@@ -523,6 +569,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 {
 	unsigned int i, temp;
 	int result;
+	bool is_lastmsg = false;
 	struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
@@ -534,6 +581,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 
 	/* read/write data */
 	for (i = 0; i < num; i++) {
+		if (i == num - 1)
+			is_lastmsg = true;
+
 		if (i) {
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> repeated start\n", __func__);
@@ -564,7 +614,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 			(temp & I2SR_RXAK ? 1 : 0));
 #endif
 		if (msgs[i].flags & I2C_M_RD)
-			result = i2c_imx_read(i2c_imx, &msgs[i]);
+			result = i2c_imx_read(i2c_imx, &msgs[i], is_lastmsg);
 		else
 			result = i2c_imx_write(i2c_imx, &msgs[i]);
 		if (result)
@@ -583,7 +633,8 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 
 static u32 i2c_imx_func(struct i2c_adapter *adapter)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+		| I2C_FUNC_SMBUS_READ_BLOCK_DATA;
 }
 
 static struct i2c_algorithm i2c_imx_algo = {
@@ -600,7 +651,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	void __iomem *base;
 	int irq, ret;
-	u32 bitrate;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
@@ -617,10 +667,8 @@ static int i2c_imx_probe(struct platform_device *pdev)
 
 	i2c_imx = devm_kzalloc(&pdev->dev, sizeof(struct imx_i2c_struct),
 				GFP_KERNEL);
-	if (!i2c_imx) {
+	if (!i2c_imx)
-		dev_err(&pdev->dev, "can't allocate interface\n");
 		return -ENOMEM;
-	}
 
 	if (of_id)
 		i2c_imx->hwdata = of_id->data;
@@ -664,12 +712,11 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
 
 	/* Set up clock divider */
-	bitrate = IMX_I2C_BIT_RATE;
+	i2c_imx->bitrate = IMX_I2C_BIT_RATE;
 	ret = of_property_read_u32(pdev->dev.of_node,
-				   "clock-frequency", &bitrate);
+				   "clock-frequency", &i2c_imx->bitrate);
 	if (ret < 0 && pdata && pdata->bitrate)
-		bitrate = pdata->bitrate;
+		i2c_imx->bitrate = pdata->bitrate;
-	i2c_imx_set_clk(i2c_imx, bitrate);
 
 	/* Set up chip registers to defaults */
 	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,

drivers/i2c/busses/i2c-mpc.c

@@ -115,7 +115,7 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 	for (k = 9; k; k--) {
 		writeccr(i2c, 0);
 		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
-		udelay(delay_val);
+		readb(i2c->base + MPC_I2C_DR);
 		writeccr(i2c, CCR_MEN);
 		udelay(delay_val << 1);
 	}

drivers/i2c/busses/i2c-mv64xxx.c

@@ -681,7 +681,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
  *****************************************************************************
  */
 static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
-	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "allwinner,sun4i-a10-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
 	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
 	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},

drivers/i2c/busses/i2c-nomadik.c

@@ -879,19 +879,19 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 #ifdef CONFIG_PM_SLEEP
 static int nmk_i2c_suspend_late(struct device *dev)
 {
-	pinctrl_pm_select_sleep_state(dev);
+	int ret;
 
+	ret = pm_runtime_force_suspend(dev);
+	if (ret)
+		return ret;
+
+	pinctrl_pm_select_sleep_state(dev);
 	return 0;
 }
 
 static int nmk_i2c_resume_early(struct device *dev)
 {
-	/* First go to the default state */
+	return pm_runtime_force_resume(dev);
-	pinctrl_pm_select_default_state(dev);
-	/* Then let's idle the pins until the next transfer happens */
-	pinctrl_pm_select_idle_state(dev);
-
-	return 0;
 }
 #endif
 

drivers/i2c/busses/i2c-nuc900.c

@@ -1,709 +0,0 @@
-/*
- * linux/drivers/i2c/busses/i2c-nuc900.c
- *
- * Copyright (c) 2010 Nuvoton technology corporation.
- *
- * This driver based on S3C2410 I2C driver of Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>.
- * Written by Wan ZongShun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/mfp.h>
-#include <linux/platform_data/i2c-nuc900.h>
-
-/* nuc900 i2c registers offset */
-
-#define CSR		0x00
-#define DIVIDER		0x04
-#define CMDR		0x08
-#define SWR		0x0C
-#define RXR		0x10
-#define TXR		0x14
-
-/* nuc900 i2c CSR register bits */
-
-#define IRQEN		0x003
-#define I2CBUSY		0x400
-#define I2CSTART	0x018
-#define IRQFLAG		0x004
-#define ARBIT_LOST	0x200
-#define SLAVE_ACK	0x800
-
-/* nuc900 i2c CMDR register bits */
-
-#define I2C_CMD_START	0x10
-#define I2C_CMD_STOP	0x08
-#define I2C_CMD_READ	0x04
-#define I2C_CMD_WRITE	0x02
-#define I2C_CMD_NACK	0x01
-
-/* i2c controller state */
-
-enum nuc900_i2c_state {
-	STATE_IDLE,
-	STATE_START,
-	STATE_READ,
-	STATE_WRITE,
-	STATE_STOP
-};
-
-/* i2c controller private data */
-
-struct nuc900_i2c {
-	spinlock_t		lock;
-	wait_queue_head_t	wait;
-
-	struct i2c_msg		*msg;
-	unsigned int		msg_num;
-	unsigned int		msg_idx;
-	unsigned int		msg_ptr;
-	unsigned int		irq;
-
-	enum nuc900_i2c_state	state;
-
-	void __iomem		*regs;
-	struct clk		*clk;
-	struct device		*dev;
-	struct resource		*ioarea;
-	struct i2c_adapter	adap;
-};
-
-/* nuc900_i2c_master_complete
- *
- * complete the message and wake up the caller, using the given return code,
- * or zero to mean ok.
-*/
-
-static inline void nuc900_i2c_master_complete(struct nuc900_i2c *i2c, int ret)
-{
-	dev_dbg(i2c->dev, "master_complete %d\n", ret);
-
-	i2c->msg_ptr = 0;
-	i2c->msg = NULL;
-	i2c->msg_idx++;
-	i2c->msg_num = 0;
-	if (ret)
-		i2c->msg_idx = ret;
-
-	wake_up(&i2c->wait);
-}
-
-/* irq enable/disable functions */
-
-static inline void nuc900_i2c_disable_irq(struct nuc900_i2c *i2c)
-{
-	unsigned long tmp;
-
-	tmp = readl(i2c->regs + CSR);
-	writel(tmp & ~IRQEN, i2c->regs + CSR);
-}
-
-static inline void nuc900_i2c_enable_irq(struct nuc900_i2c *i2c)
-{
-	unsigned long tmp;
-
-	tmp = readl(i2c->regs + CSR);
-	writel(tmp | IRQEN, i2c->regs + CSR);
-}
-
-
-/* nuc900_i2c_message_start
- *
- * put the start of a message onto the bus
-*/
-
-static void nuc900_i2c_message_start(struct nuc900_i2c *i2c,
-				      struct i2c_msg *msg)
-{
-	unsigned int addr = (msg->addr & 0x7f) << 1;
-
-	if (msg->flags & I2C_M_RD)
-		addr |= 0x1;
-	writel(addr & 0xff, i2c->regs + TXR);
-	writel(I2C_CMD_START | I2C_CMD_WRITE, i2c->regs + CMDR);
-}
-
-static inline void nuc900_i2c_stop(struct nuc900_i2c *i2c, int ret)
-{
-
-	dev_dbg(i2c->dev, "STOP\n");
-
-	/* stop the transfer */
-	i2c->state = STATE_STOP;
-	writel(I2C_CMD_STOP, i2c->regs + CMDR);
-
-	nuc900_i2c_master_complete(i2c, ret);
-	nuc900_i2c_disable_irq(i2c);
-}
-
-/* helper functions to determine the current state in the set of
- * messages we are sending
-*/
-
-/* is_lastmsg()
- *
- * returns TRUE if the current message is the last in the set
-*/
-
-static inline int is_lastmsg(struct nuc900_i2c *i2c)
-{
-	return i2c->msg_idx >= (i2c->msg_num - 1);
-}
-
-/* is_msglast
- *
- * returns TRUE if we this is the last byte in the current message
-*/
-
-static inline int is_msglast(struct nuc900_i2c *i2c)
-{
-	return i2c->msg_ptr == i2c->msg->len-1;
-}
-
-/* is_msgend
- *
- * returns TRUE if we reached the end of the current message
-*/
-
-static inline int is_msgend(struct nuc900_i2c *i2c)
-{
-	return i2c->msg_ptr >= i2c->msg->len;
-}
-
-/* i2c_nuc900_irq_nextbyte
- *
- * process an interrupt and work out what to do
- */
-
-static void i2c_nuc900_irq_nextbyte(struct nuc900_i2c *i2c,
-							unsigned long iicstat)
-{
-	unsigned char byte;
-
-	switch (i2c->state) {
-
-	case STATE_IDLE:
-		dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
-		break;
-
-	case STATE_STOP:
-		dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
-		nuc900_i2c_disable_irq(i2c);
-		break;
-
-	case STATE_START:
-		/* last thing we did was send a start condition on the
-		 * bus, or started a new i2c message
-		 */
-
-		if (iicstat & SLAVE_ACK &&
-		    !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
-			/* ack was not received... */
-
-			dev_dbg(i2c->dev, "ack was not received\n");
-			nuc900_i2c_stop(i2c, -ENXIO);
-			break;
-		}
-
-		if (i2c->msg->flags & I2C_M_RD)
-			i2c->state = STATE_READ;
-		else
-			i2c->state = STATE_WRITE;
-
-		/* terminate the transfer if there is nothing to do
-		 * as this is used by the i2c probe to find devices.
-		*/
-
-		if (is_lastmsg(i2c) && i2c->msg->len == 0) {
-			nuc900_i2c_stop(i2c, 0);
-			break;
-		}
-
-		if (i2c->state == STATE_READ)
-			goto prepare_read;
-
-		/* fall through to the write state, as we will need to
-		 * send a byte as well
-		*/
-
-	case STATE_WRITE:
-		/* we are writing data to the device... check for the
-		 * end of the message, and if so, work out what to do
-		 */
-
-		if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
-			if (iicstat & SLAVE_ACK) {
-				dev_dbg(i2c->dev, "WRITE: No Ack\n");
-
-				nuc900_i2c_stop(i2c, -ECONNREFUSED);
-				break;
-			}
-		}
-
-retry_write:
-
-		if (!is_msgend(i2c)) {
-			byte = i2c->msg->buf[i2c->msg_ptr++];
-			writeb(byte, i2c->regs + TXR);
-			writel(I2C_CMD_WRITE, i2c->regs + CMDR);
-
-		} else if (!is_lastmsg(i2c)) {
-			/* we need to go to the next i2c message */
-
-			dev_dbg(i2c->dev, "WRITE: Next Message\n");
-
-			i2c->msg_ptr = 0;
-			i2c->msg_idx++;
-			i2c->msg++;
-
-			/* check to see if we need to do another message */
-			if (i2c->msg->flags & I2C_M_NOSTART) {
-
-				if (i2c->msg->flags & I2C_M_RD) {
-					/* cannot do this, the controller
-					 * forces us to send a new START
-					 * when we change direction
-					*/
-
-					nuc900_i2c_stop(i2c, -EINVAL);
-				}
-
-				goto retry_write;
-			} else {
-				/* send the new start */
-				nuc900_i2c_message_start(i2c, i2c->msg);
-				i2c->state = STATE_START;
-			}
-
-		} else {
-			/* send stop */
-
-			nuc900_i2c_stop(i2c, 0);
-		}
-		break;
-
-	case STATE_READ:
-		/* we have a byte of data in the data register, do
-		 * something with it, and then work out whether we are
-		 * going to do any more read/write
-		 */
-
-		byte = readb(i2c->regs + RXR);
-		i2c->msg->buf[i2c->msg_ptr++] = byte;
-
-prepare_read:
-		if (is_msglast(i2c)) {
-			/* last byte of buffer */
-
-			if (is_lastmsg(i2c))
-				writel(I2C_CMD_READ | I2C_CMD_NACK,
-							i2c->regs + CMDR);
-
-		} else if (is_msgend(i2c)) {
-			/* ok, we've read the entire buffer, see if there
-			 * is anything else we need to do
-			*/
-
-			if (is_lastmsg(i2c)) {
-				/* last message, send stop and complete */
-				dev_dbg(i2c->dev, "READ: Send Stop\n");
-
-				nuc900_i2c_stop(i2c, 0);
-			} else {
-				/* go to the next transfer */
-				dev_dbg(i2c->dev, "READ: Next Transfer\n");
-
-				i2c->msg_ptr = 0;
-				i2c->msg_idx++;
-				i2c->msg++;
-
-				writel(I2C_CMD_READ, i2c->regs + CMDR);
-			}
-
-		} else {
-			writel(I2C_CMD_READ, i2c->regs + CMDR);
-		}
-
-		break;
-	}
-}
-
-/* nuc900_i2c_irq
- *
- * top level IRQ servicing routine
-*/
-
-static irqreturn_t nuc900_i2c_irq(int irqno, void *dev_id)
-{
-	struct nuc900_i2c *i2c = dev_id;
-	unsigned long status;
-
-	status = readl(i2c->regs + CSR);
-	writel(status | IRQFLAG, i2c->regs + CSR);
-
-	if (status & ARBIT_LOST) {
-		/* deal with arbitration loss */
-		dev_err(i2c->dev, "deal with arbitration loss\n");
-		goto out;
-	}
-
-	if (i2c->state == STATE_IDLE) {
-		dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
-		goto out;
-	}
-
-	/* pretty much this leaves us with the fact that we've
-	 * transmitted or received whatever byte we last sent
-	*/
-
-	i2c_nuc900_irq_nextbyte(i2c, status);
-
- out:
-	return IRQ_HANDLED;
-}
-
-
-/* nuc900_i2c_set_master
- *
- * get the i2c bus for a master transaction
-*/
-
-static int nuc900_i2c_set_master(struct nuc900_i2c *i2c)
-{
-	int timeout = 400;
-
-	while (timeout-- > 0) {
-		if (((readl(i2c->regs + SWR) & I2CSTART) == I2CSTART) &&
-				((readl(i2c->regs + CSR) & I2CBUSY) == 0)) {
-			return 0;
-		}
-
-		msleep(1);
-	}
-
-	return -ETIMEDOUT;
-}
-
-/* nuc900_i2c_doxfer
- *
- * this starts an i2c transfer
-*/
-
-static int nuc900_i2c_doxfer(struct nuc900_i2c *i2c,
-			      struct i2c_msg *msgs, int num)
-{
-	unsigned long iicstat, timeout;
-	int spins = 20;
-	int ret;
-
-	ret = nuc900_i2c_set_master(i2c);
-	if (ret != 0) {
-		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
-		ret = -EAGAIN;
-		goto out;
-	}
-
-	spin_lock_irq(&i2c->lock);
-
-	i2c->msg     = msgs;
-	i2c->msg_num = num;
-	i2c->msg_ptr = 0;
-	i2c->msg_idx = 0;
-	i2c->state   = STATE_START;
-
-	nuc900_i2c_message_start(i2c, msgs);
-	spin_unlock_irq(&i2c->lock);
-
-	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
-
-	ret = i2c->msg_idx;
-
-	/* having these next two as dev_err() makes life very
-	 * noisy when doing an i2cdetect
-	*/
-
-	if (timeout == 0)
-		dev_dbg(i2c->dev, "timeout\n");
-	else if (ret != num)
-		dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
-
-	/* ensure the stop has been through the bus */
-
-	dev_dbg(i2c->dev, "waiting for bus idle\n");
-
-	/* first, try busy waiting briefly */
-	do {
-		iicstat = readl(i2c->regs + CSR);
-	} while ((iicstat & I2CBUSY) && --spins);
-
-	/* if that timed out sleep */
-	if (!spins) {
-		msleep(1);
-		iicstat = readl(i2c->regs + CSR);
-	}
-
-	if (iicstat & I2CBUSY)
-		dev_warn(i2c->dev, "timeout waiting for bus idle\n");
-
- out:
-	return ret;
-}
-
-/* nuc900_i2c_xfer
- *
- * first port of call from the i2c bus code when an message needs
- * transferring across the i2c bus.
-*/
-
-static int nuc900_i2c_xfer(struct i2c_adapter *adap,
-			struct i2c_msg *msgs, int num)
-{
-	struct nuc900_i2c *i2c = (struct nuc900_i2c *)adap->algo_data;
-	int retry;
-	int ret;
-
-	nuc900_i2c_enable_irq(i2c);
-
-	for (retry = 0; retry < adap->retries; retry++) {
-
-		ret = nuc900_i2c_doxfer(i2c, msgs, num);
-
-		if (ret != -EAGAIN)
-			return ret;
-
-		dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
-
-		udelay(100);
-	}
-
-	return -EREMOTEIO;
-}
-
-/* declare our i2c functionality */
-static u32 nuc900_i2c_func(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART |
-		I2C_FUNC_PROTOCOL_MANGLING;
-}
-
-/* i2c bus registration info */
-
-static const struct i2c_algorithm nuc900_i2c_algorithm = {
-	.master_xfer		= nuc900_i2c_xfer,
-	.functionality		= nuc900_i2c_func,
-};
-
-/* nuc900_i2c_probe
- *
- * called by the bus driver when a suitable device is found
-*/
-
-static int nuc900_i2c_probe(struct platform_device *pdev)
-{
-	struct nuc900_i2c *i2c;
-	struct nuc900_platform_i2c *pdata;
-	struct resource *res;
-	int ret;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -EINVAL;
-	}
-
-	i2c = kzalloc(sizeof(struct nuc900_i2c), GFP_KERNEL);
-	if (!i2c) {
-		dev_err(&pdev->dev, "no memory for state\n");
-		return -ENOMEM;
-	}
-
-	strlcpy(i2c->adap.name, "nuc900-i2c0", sizeof(i2c->adap.name));
-	i2c->adap.owner   = THIS_MODULE;
-	i2c->adap.algo    = &nuc900_i2c_algorithm;
-	i2c->adap.retries = 2;
-	i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-
-	spin_lock_init(&i2c->lock);
-	init_waitqueue_head(&i2c->wait);
-
-	/* find the clock and enable it */
-
-	i2c->dev = &pdev->dev;
-	i2c->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "cannot get clock\n");
-		ret = -ENOENT;
-		goto err_noclk;
-	}
-
-	dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
-
-	clk_enable(i2c->clk);
-
-	/* map the registers */
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "cannot find IO resource\n");
-		ret = -ENOENT;
-		goto err_clk;
-	}
-
-	i2c->ioarea = request_mem_region(res->start, resource_size(res),
-					 pdev->name);
-
-	if (i2c->ioarea == NULL) {
-		dev_err(&pdev->dev, "cannot request IO\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	i2c->regs = ioremap(res->start, resource_size(res));
-
-	if (i2c->regs == NULL) {
-		dev_err(&pdev->dev, "cannot map IO\n");
-		ret = -ENXIO;
-		goto err_ioarea;
-	}
-
-	dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
-		i2c->regs, i2c->ioarea, res);
-
-	/* setup info block for the i2c core */
-
-	i2c->adap.algo_data = i2c;
-	i2c->adap.dev.parent = &pdev->dev;
-
-	mfp_set_groupg(&pdev->dev, NULL);
-
-	clk_get_rate(i2c->clk);
-
-	ret = (i2c->clk.apbfreq)/(pdata->bus_freq * 5) - 1;
-	writel(ret & 0xffff, i2c->regs + DIVIDER);
-
-	/* find the IRQ for this unit (note, this relies on the init call to
-	 * ensure no current IRQs pending
-	 */
-
-	i2c->irq = ret = platform_get_irq(pdev, 0);
-	if (ret <= 0) {
-		dev_err(&pdev->dev, "cannot find IRQ\n");
-		goto err_iomap;
-	}
-
-	ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_SHARED,
-			  dev_name(&pdev->dev), i2c);
-
-	if (ret != 0) {
-		dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
-		goto err_iomap;
-	}
-
-	/* Note, previous versions of the driver used i2c_add_adapter()
-	 * to add the bus at any number. We now pass the bus number via
-	 * the platform data, so if unset it will now default to always
-	 * being bus 0.
-	 */
-
-	i2c->adap.nr = pdata->bus_num;
-
-	ret = i2c_add_numbered_adapter(&i2c->adap);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
-		goto err_irq;
-	}
-
-	platform_set_drvdata(pdev, i2c);
-
-	dev_info(&pdev->dev, "%s: NUC900 I2C adapter\n",
-						dev_name(&i2c->adap.dev));
-	return 0;
-
- err_irq:
-	free_irq(i2c->irq, i2c);
-
- err_iomap:
-	iounmap(i2c->regs);
-
- err_ioarea:
-	release_resource(i2c->ioarea);
-	kfree(i2c->ioarea);
-
- err_clk:
-	clk_disable(i2c->clk);
-	clk_put(i2c->clk);
-
- err_noclk:
-	kfree(i2c);
-	return ret;
-}
-
-/* nuc900_i2c_remove
- *
- * called when device is removed from the bus
-*/
-
-static int nuc900_i2c_remove(struct platform_device *pdev)
-{
-	struct nuc900_i2c *i2c = platform_get_drvdata(pdev);
-
-	i2c_del_adapter(&i2c->adap);
-	free_irq(i2c->irq, i2c);
-
-	clk_disable(i2c->clk);
-	clk_put(i2c->clk);
-
-	iounmap(i2c->regs);
-
-	release_resource(i2c->ioarea);
-	kfree(i2c->ioarea);
-	kfree(i2c);
-
-	return 0;
-}
-
-static struct platform_driver nuc900_i2c_driver = {
-	.probe		= nuc900_i2c_probe,
-	.remove		= nuc900_i2c_remove,
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "nuc900-i2c0",
-	},
-};
-
-static int __init i2c_adap_nuc900_init(void)
-{
-	return platform_driver_register(&nuc900_i2c_driver);
-}
-
-static void __exit i2c_adap_nuc900_exit(void)
-{
-	platform_driver_unregister(&nuc900_i2c_driver);
-}
-subsys_initcall(i2c_adap_nuc900_init);
-module_exit(i2c_adap_nuc900_exit);
-
-MODULE_DESCRIPTION("NUC900 I2C Bus driver");
-MODULE_AUTHOR("Wan ZongShun, <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:nuc900-i2c0");

drivers/i2c/busses/i2c-ocores.c

@@ -250,7 +250,7 @@ static struct i2c_adapter ocores_adapter = {
 	.algo		= &ocores_algorithm,
 };
 
-static struct of_device_id ocores_i2c_match[] = {
+static const struct of_device_id ocores_i2c_match[] = {
 	{
 		.compatible = "opencores,i2c-ocores",
 		.data = (void *)TYPE_OCORES,

drivers/i2c/busses/i2c-omap.c

@@ -1114,10 +1114,8 @@ omap_i2c_probe(struct platform_device *pdev)
 	}
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
-	if (!dev) {
+	if (!dev)
-		dev_err(&pdev->dev, "Menory allocation failed\n");
 		return -ENOMEM;
-	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);

drivers/i2c/busses/i2c-pxa.c

@@ -1084,7 +1084,7 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
 	.functionality	= i2c_pxa_functionality,
 };
 
-static struct of_device_id i2c_pxa_dt_ids[] = {
+static const struct of_device_id i2c_pxa_dt_ids[] = {
 	{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
 	{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
 	{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX },

drivers/i2c/busses/i2c-rcar.c

@@ -1,7 +1,9 @@
 /*
- *  drivers/i2c/busses/i2c-rcar.c
+ * Driver for the Renesas RCar I2C unit
  *
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang <wsa@sang-engineering.com>
+ *
+ * Copyright (C) 2012-14 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
  *
  * This file is based on the drivers/i2c/busses/i2c-sh7760.c
@@ -12,16 +14,12 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
+ * the Free Software Foundation; version 2 of the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -36,7 +34,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
-#include <linux/spinlock.h>
 
 /* register offsets */
 #define ICSCR	0x00	/* slave ctrl */
@@ -60,7 +57,7 @@
 #define FSB	(1 << 1)	/* force stop bit */
 #define ESG	(1 << 0)	/* en startbit gen */
 
-/* ICMSR */
+/* ICMSR (also for ICMIE) */
 #define MNR	(1 << 6)	/* nack received */
 #define MAL	(1 << 5)	/* arbitration lost */
 #define MST	(1 << 4)	/* sent a stop */
@@ -69,32 +66,18 @@
 #define MDR	(1 << 1)
 #define MAT	(1 << 0)	/* slave addr xfer done */
 
-/* ICMIE */
-#define MNRE	(1 << 6)	/* nack irq en */
-#define MALE	(1 << 5)	/* arblos irq en */
-#define MSTE	(1 << 4)	/* stop irq en */
-#define MDEE	(1 << 3)
-#define MDTE	(1 << 2)
-#define MDRE	(1 << 1)
-#define MATE	(1 << 0)	/* address sent irq en */
 
+#define RCAR_BUS_PHASE_START	(MDBS | MIE | ESG)
+#define RCAR_BUS_PHASE_DATA	(MDBS | MIE)
+#define RCAR_BUS_PHASE_STOP	(MDBS | MIE | FSB)
 
-enum {
+#define RCAR_IRQ_SEND	(MNR | MAL | MST | MAT | MDE)
-	RCAR_BUS_PHASE_ADDR,
+#define RCAR_IRQ_RECV	(MNR | MAL | MST | MAT | MDR)
-	RCAR_BUS_PHASE_DATA,
+#define RCAR_IRQ_STOP	(MST)
-	RCAR_BUS_PHASE_STOP,
-};
 
-enum {
+#define RCAR_IRQ_ACK_SEND	(~(MAT | MDE))
-	RCAR_IRQ_CLOSE,
+#define RCAR_IRQ_ACK_RECV	(~(MAT | MDR))
-	RCAR_IRQ_OPEN_FOR_SEND,
-	RCAR_IRQ_OPEN_FOR_RECV,
-	RCAR_IRQ_OPEN_FOR_STOP,
-};
 
-/*
- * flags
- */
 #define ID_LAST_MSG	(1 << 0)
 #define ID_IOERROR	(1 << 1)
 #define ID_DONE		(1 << 2)
@@ -112,14 +95,12 @@ struct rcar_i2c_priv {
 	struct i2c_msg	*msg;
 	struct clk *clk;
 
-	spinlock_t lock;
 	wait_queue_head_t wait;
 
 	int pos;
-	int irq;
 	u32 icccr;
 	u32 flags;
-	enum rcar_i2c_type	devtype;
+	enum rcar_i2c_type devtype;
 };
 
 #define rcar_i2c_priv_to_dev(p)		((p)->adap.dev.parent)
@@ -130,9 +111,7 @@ struct rcar_i2c_priv {
 
 #define LOOP_TIMEOUT	1024
 
-/*
+
- *		basic functions
- */
 static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val)
 {
 	writel(val, priv->io + reg);
@@ -161,36 +140,6 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
 	rcar_i2c_write(priv, ICMAR, 0);
 }
 
-static void rcar_i2c_irq_mask(struct rcar_i2c_priv *priv, int open)
-{
-	u32 val = MNRE | MALE | MSTE | MATE; /* default */
-
-	switch (open) {
-	case RCAR_IRQ_OPEN_FOR_SEND:
-		val |= MDEE; /* default + send */
-		break;
-	case RCAR_IRQ_OPEN_FOR_RECV:
-		val |= MDRE; /* default + read */
-		break;
-	case RCAR_IRQ_OPEN_FOR_STOP:
-		val = MSTE; /* stop irq only */
-		break;
-	case RCAR_IRQ_CLOSE:
-	default:
-		val = 0; /* all close */
-		break;
-	}
-	rcar_i2c_write(priv, ICMIER, val);
-}
-
-static void rcar_i2c_set_addr(struct rcar_i2c_priv *priv, u32 recv)
-{
-	rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | recv);
-}
-
-/*
- *		bus control functions
- */
 static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
 {
 	int i;
@@ -205,24 +154,6 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
 	return -EBUSY;
 }
 
-static void rcar_i2c_bus_phase(struct rcar_i2c_priv *priv, int phase)
-{
-	switch (phase) {
-	case RCAR_BUS_PHASE_ADDR:
-		rcar_i2c_write(priv, ICMCR, MDBS | MIE | ESG);
-		break;
-	case RCAR_BUS_PHASE_DATA:
-		rcar_i2c_write(priv, ICMCR, MDBS | MIE);
-		break;
-	case RCAR_BUS_PHASE_STOP:
-		rcar_i2c_write(priv, ICMCR, MDBS | MIE | FSB);
-		break;
-	}
-}
-
-/*
- *		clock function
- */
 static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
 				    u32 bus_speed,
 				    struct device *dev)
@@ -312,60 +243,18 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
 	return 0;
 }
 
-static void rcar_i2c_clock_start(struct rcar_i2c_priv *priv)
+static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
 {
-	rcar_i2c_write(priv, ICCCR, priv->icccr);
+	int read = !!rcar_i2c_is_recv(priv);
-}
 
-/*
+	rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
- *		status functions
+	rcar_i2c_write(priv, ICMSR, 0);
- */
+	rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
-static u32 rcar_i2c_status_get(struct rcar_i2c_priv *priv)
+	rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
-{
-	return rcar_i2c_read(priv, ICMSR);
-}
-
-#define rcar_i2c_status_clear(priv) rcar_i2c_status_bit_clear(priv, 0xffffffff)
-static void rcar_i2c_status_bit_clear(struct rcar_i2c_priv *priv, u32 bit)
-{
-	rcar_i2c_write(priv, ICMSR, ~bit);
-}
-
-/*
- *		recv/send functions
- */
-static int rcar_i2c_recv(struct rcar_i2c_priv *priv)
-{
-	rcar_i2c_set_addr(priv, 1);
-	rcar_i2c_status_clear(priv);
-	rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR);
-	rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_RECV);
 
 	return 0;
 }
 
-static int rcar_i2c_send(struct rcar_i2c_priv *priv)
-{
-	int ret;
-
-	/*
-	 * It should check bus status when send case
-	 */
-	ret = rcar_i2c_bus_barrier(priv);
-	if (ret < 0)
-		return ret;
-
-	rcar_i2c_set_addr(priv, 0);
-	rcar_i2c_status_clear(priv);
-	rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_ADDR);
-	rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_SEND);
-
-	return 0;
-}
-
-#define rcar_i2c_send_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDE))
-#define rcar_i2c_recv_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDR))
-
 /*
  *		interrupt functions
  */
@@ -386,7 +275,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
 	 * goto data phase.
 	 */
 	if (msr & MAT)
-		rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA);
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
 
 	if (priv->pos < msg->len) {
 		/*
@@ -414,7 +303,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
 			 * prepare stop condition here.
 			 * ID_DONE will be set on STOP irq.
 			 */
-			rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP);
+			rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
 		else
 			/*
 			 * If current msg is _NOT_ last msg,
@@ -425,7 +314,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
 			return ID_DONE;
 	}
 
-	rcar_i2c_send_restart(priv);
+	rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND);
 
 	return 0;
 }
@@ -462,11 +351,11 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
 	 * otherwise, go to DATA phase.
 	 */
 	if (priv->pos + 1 >= msg->len)
-		rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP);
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
 	else
-		rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_DATA);
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
 
-	rcar_i2c_recv_restart(priv);
+	rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
 
 	return 0;
 }
@@ -474,53 +363,31 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
 static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 {
 	struct rcar_i2c_priv *priv = ptr;
-	struct device *dev = rcar_i2c_priv_to_dev(priv);
 	u32 msr;
 
-	/*-------------- spin lock -----------------*/
+	msr = rcar_i2c_read(priv, ICMSR);
-	spin_lock(&priv->lock);
 
-	msr = rcar_i2c_status_get(priv);
+	/* Arbitration lost */
-
-	/*
-	 * Arbitration lost
-	 */
 	if (msr & MAL) {
-		/*
-		 * CAUTION
-		 *
-		 * When arbitration lost, device become _slave_ mode.
-		 */
-		dev_dbg(dev, "Arbitration Lost\n");
 		rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST));
 		goto out;
 	}
 
-	/*
+	/* Stop */
-	 * Stop
-	 */
 	if (msr & MST) {
-		dev_dbg(dev, "Stop\n");
 		rcar_i2c_flags_set(priv, ID_DONE);
 		goto out;
 	}
 
-	/*
+	/* Nack */
-	 * Nack
-	 */
 	if (msr & MNR) {
-		dev_dbg(dev, "Nack\n");
-
 		/* go to stop phase */
-		rcar_i2c_bus_phase(priv, RCAR_BUS_PHASE_STOP);
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
-		rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_STOP);
+		rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
 		rcar_i2c_flags_set(priv, ID_NACK);
 		goto out;
 	}
 
-	/*
-	 * recv/send
-	 */
 	if (rcar_i2c_is_recv(priv))
 		rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
 	else
@@ -528,14 +395,11 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 
 out:
 	if (rcar_i2c_flags_has(priv, ID_DONE)) {
-		rcar_i2c_irq_mask(priv, RCAR_IRQ_CLOSE);
+		rcar_i2c_write(priv, ICMIER, 0);
-		rcar_i2c_status_clear(priv);
+		rcar_i2c_write(priv, ICMSR, 0);
 		wake_up(&priv->wait);
 	}
 
-	spin_unlock(&priv->lock);
-	/*-------------- spin unlock -----------------*/
-
 	return IRQ_HANDLED;
 }
 
@@ -545,21 +409,18 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 {
 	struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
 	struct device *dev = rcar_i2c_priv_to_dev(priv);
-	unsigned long flags;
 	int i, ret, timeout;
 
 	pm_runtime_get_sync(dev);
 
-	/*-------------- spin lock -----------------*/
-	spin_lock_irqsave(&priv->lock, flags);
-
 	rcar_i2c_init(priv);
-	rcar_i2c_clock_start(priv);
+	/* start clock */
+	rcar_i2c_write(priv, ICCCR, priv->icccr);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	ret = rcar_i2c_bus_barrier(priv);
-	/*-------------- spin unlock -----------------*/
+	if (ret < 0)
+		goto out;
 
-	ret = -EINVAL;
 	for (i = 0; i < num; i++) {
 		/* This HW can't send STOP after address phase */
 		if (msgs[i].len == 0) {
@@ -567,9 +428,6 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 			break;
 		}
 
-		/*-------------- spin lock -----------------*/
-		spin_lock_irqsave(&priv->lock, flags);
-
 		/* init each data */
 		priv->msg	= &msgs[i];
 		priv->pos	= 0;
@@ -577,21 +435,11 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 		if (priv->msg == &msgs[num - 1])
 			rcar_i2c_flags_set(priv, ID_LAST_MSG);
 
-		/* start send/recv */
+		ret = rcar_i2c_prepare_msg(priv);
-		if (rcar_i2c_is_recv(priv))
-			ret = rcar_i2c_recv(priv);
-		else
-			ret = rcar_i2c_send(priv);
-
-		spin_unlock_irqrestore(&priv->lock, flags);
-		/*-------------- spin unlock -----------------*/
 
 		if (ret < 0)
 			break;
 
-		/*
-		 * wait result
-		 */
 		timeout = wait_event_timeout(priv->wait,
 					     rcar_i2c_flags_has(priv, ID_DONE),
 					     5 * HZ);
@@ -600,9 +448,6 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 			break;
 		}
 
-		/*
-		 * error handling
-		 */
 		if (rcar_i2c_flags_has(priv, ID_NACK)) {
 			ret = -ENXIO;
 			break;
@@ -620,7 +465,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 		ret = i + 1; /* The number of transfer */
 	}
-
+out:
 	pm_runtime_put(dev);
 
 	if (ret < 0 && ret != -ENXIO)
@@ -646,6 +491,9 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
 	{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
 	{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
 	{ .compatible = "renesas,i2c-r8a7791", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7792", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
+	{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
@@ -658,13 +506,11 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct device *dev = &pdev->dev;
 	u32 bus_speed;
-	int ret;
+	int irq, ret;
 
 	priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
-	if (!priv) {
+	if (!priv)
-		dev_err(dev, "no mem for private data\n");
 		return -ENOMEM;
-	}
 
 	priv->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(priv->clk)) {
@@ -692,9 +538,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->io))
 		return PTR_ERR(priv->io);
 
-	priv->irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq(pdev, 0);
 	init_waitqueue_head(&priv->wait);
-	spin_lock_init(&priv->lock);
 
 	adap			= &priv->adap;
 	adap->nr		= pdev->id;
@@ -706,10 +551,10 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, priv);
 	strlcpy(adap->name, pdev->name, sizeof(adap->name));
 
-	ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0,
+	ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0,
 			       dev_name(dev), priv);
 	if (ret < 0) {
-		dev_err(dev, "cannot get irq %d\n", priv->irq);
+		dev_err(dev, "cannot get irq %d\n", irq);
 		return ret;
 	}
 
@@ -759,6 +604,6 @@ static struct platform_driver rcar_i2c_driver = {
 
 module_platform_driver(rcar_i2c_driver);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Renesas R-Car I2C bus driver");
 MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");

drivers/i2c/busses/i2c-riic.c

@@ -404,7 +404,7 @@ static int riic_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id riic_i2c_dt_ids[] = {
+static const struct of_device_id riic_i2c_dt_ids[] = {
 	{ .compatible = "renesas,riic-rz" },
 	{ /* Sentinel */ },
 };

drivers/i2c/busses/i2c-s3c2410.c

@@ -1114,16 +1114,12 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	}
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL);
-	if (!i2c) {
+	if (!i2c)
-		dev_err(&pdev->dev, "no memory for state\n");
 		return -ENOMEM;
-	}
 
 	i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!i2c->pdata) {
+	if (!i2c->pdata)
-		dev_err(&pdev->dev, "no memory for platform data\n");
 		return -ENOMEM;
-	}
 
 	i2c->quirks = s3c24xx_get_device_quirks(pdev);
 	if (pdata)

drivers/i2c/busses/i2c-sh_mobile.c

@@ -32,6 +32,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
 #include <linux/i2c/i2c-sh_mobile.h>
 
 /* Transmit operation:                                                      */
@@ -139,6 +140,10 @@ struct sh_mobile_i2c_data {
 	bool send_stop;
 };
 
+struct sh_mobile_dt_config {
+	int clks_per_count;
+};
+
 #define IIC_FLAG_HAS_ICIC67	(1 << 0)
 
 #define STANDARD_MODE		100000
@@ -194,7 +199,7 @@ static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
 	iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
 }
 
-static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf, int offset)
+static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf)
 {
 	/*
 	 * Conditional expression:
@@ -206,10 +211,10 @@ static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf, int off
 	 * account the fall time of SCL signal (tf).  Default tf value
 	 * should be 0.3 us, for safety.
 	 */
-	return (((count_khz * (tLOW + tf)) + 5000) / 10000) + offset;
+	return (((count_khz * (tLOW + tf)) + 5000) / 10000);
 }
 
-static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf, int offset)
+static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf)
 {
 	/*
 	 * Conditional expression:
@@ -225,52 +230,58 @@ static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf, int of
 	 * to take into account the fall time of SDA signal (tf) at START
 	 * condition, in order to meet both tHIGH and tHD;STA specs.
 	 */
-	return (((count_khz * (tHIGH + tf)) + 5000) / 10000) + offset;
+	return (((count_khz * (tHIGH + tf)) + 5000) / 10000);
 }
 
-static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
+static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
 {
 	unsigned long i2c_clk_khz;
 	u32 tHIGH, tLOW, tf;
-	int offset;
+	uint16_t max_val;
 
 	/* Get clock rate after clock is enabled */
 	clk_prepare_enable(pd->clk);
 	i2c_clk_khz = clk_get_rate(pd->clk) / 1000;
+	clk_disable_unprepare(pd->clk);
 	i2c_clk_khz /= pd->clks_per_count;
 
 	if (pd->bus_speed == STANDARD_MODE) {
 		tLOW	= 47;	/* tLOW = 4.7 us */
 		tHIGH	= 40;	/* tHD;STA = tHIGH = 4.0 us */
 		tf	= 3;	/* tf = 0.3 us */
-		offset	= 0;	/* No offset */
 	} else if (pd->bus_speed == FAST_MODE) {
 		tLOW	= 13;	/* tLOW = 1.3 us */
 		tHIGH	= 6;	/* tHD;STA = tHIGH = 0.6 us */
 		tf	= 3;	/* tf = 0.3 us */
-		offset	= 0;	/* No offset */
 	} else {
 		dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
 			pd->bus_speed);
-		goto out;
+		return -EINVAL;
+	}
+
+	pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf);
+	pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf);
+
+	max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff;
+	if (pd->iccl > max_val || pd->icch > max_val) {
+		dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n",
+			pd->iccl, pd->icch);
+		return -EINVAL;
 	}
 
-	pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf, offset);
 	/* one more bit of ICCL in ICIC */
-	if ((pd->iccl > 0xff) && (pd->flags & IIC_FLAG_HAS_ICIC67))
+	if (pd->iccl & 0x100)
 		pd->icic |= ICIC_ICCLB8;
 	else
 		pd->icic &= ~ICIC_ICCLB8;
 
-	pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf, offset);
 	/* one more bit of ICCH in ICIC */
-	if ((pd->icch > 0xff) && (pd->flags & IIC_FLAG_HAS_ICIC67))
+	if (pd->icch & 0x100)
 		pd->icic |= ICIC_ICCHB8;
 	else
 		pd->icic &= ~ICIC_ICCHB8;
 
-out:
+	return 0;
-	clk_disable_unprepare(pd->clk);
 }
 
 static void activate_ch(struct sh_mobile_i2c_data *pd)
@@ -316,7 +327,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 
 	switch (op) {
 	case OP_START: /* issue start and trigger DTE interrupt */
-		iic_wr(pd, ICCR, 0x94);
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY);
 		break;
 	case OP_TX_FIRST: /* disable DTE interrupt and write data */
 		iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
@@ -327,10 +338,11 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 		break;
 	case OP_TX_STOP: /* write data and issue a stop afterwards */
 		iic_wr(pd, ICDR, data);
-		iic_wr(pd, ICCR, pd->send_stop ? 0x90 : 0x94);
+		iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS
+					       : ICCR_ICE | ICCR_TRS | ICCR_BBSY);
 		break;
 	case OP_TX_TO_RX: /* select read mode */
-		iic_wr(pd, ICCR, 0x81);
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP);
 		break;
 	case OP_RX: /* just read data */
 		ret = iic_rd(pd, ICDR);
@@ -338,13 +350,13 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
 		iic_wr(pd, ICIC,
 		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
-		iic_wr(pd, ICCR, 0xc0);
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
 		break;
 	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
 		iic_wr(pd, ICIC,
 		       ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
 		ret = iic_rd(pd, ICDR);
-		iic_wr(pd, ICCR, 0xc0);
+		iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
 		break;
 	}
 
@@ -479,7 +491,7 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
 {
 	if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
 		dev_err(pd->dev, "Unsupported zero length i2c read\n");
-		return -EIO;
+		return -EOPNOTSUPP;
 	}
 
 	if (do_init) {
@@ -514,17 +526,12 @@ static int poll_dte(struct sh_mobile_i2c_data *pd)
 			break;
 
 		if (val & ICSR_TACK)
-			return -EIO;
+			return -ENXIO;
 
 		udelay(10);
 	}
 
-	if (!i) {
+	return i ? 0 : -ETIMEDOUT;
-		dev_warn(pd->dev, "Timeout polling for DTE!\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
 }
 
 static int poll_busy(struct sh_mobile_i2c_data *pd)
@@ -542,20 +549,18 @@ static int poll_busy(struct sh_mobile_i2c_data *pd)
 		 */
 		if (!(val & ICSR_BUSY)) {
 			/* handle missing acknowledge and arbitration lost */
-			if ((val | pd->sr) & (ICSR_TACK | ICSR_AL))
+			val |= pd->sr;
-				return -EIO;
+			if (val & ICSR_TACK)
+				return -ENXIO;
+			if (val & ICSR_AL)
+				return -EAGAIN;
 			break;
 		}
 
 		udelay(10);
 	}
 
-	if (!i) {
+	return i ? 0 : -ETIMEDOUT;
-		dev_err(pd->dev, "Polling timed out\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
 }
 
 static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
@@ -617,42 +622,44 @@ static struct i2c_algorithm sh_mobile_i2c_algorithm = {
 	.master_xfer	= sh_mobile_i2c_xfer,
 };
 
-static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
+static const struct sh_mobile_dt_config default_dt_config = {
+	.clks_per_count = 1,
+};
+
+static const struct sh_mobile_dt_config rcar_gen2_dt_config = {
+	.clks_per_count = 2,
+};
+
+static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
+	{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
+	{ .compatible = "renesas,iic-r8a7790", .data = &rcar_gen2_dt_config },
+	{ .compatible = "renesas,iic-r8a7791", .data = &rcar_gen2_dt_config },
+	{ .compatible = "renesas,iic-r8a7792", .data = &rcar_gen2_dt_config },
+	{ .compatible = "renesas,iic-r8a7793", .data = &rcar_gen2_dt_config },
+	{ .compatible = "renesas,iic-r8a7794", .data = &rcar_gen2_dt_config },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
+
+static int sh_mobile_i2c_hook_irqs(struct platform_device *dev)
 {
 	struct resource *res;
-	int ret = -ENXIO;
+	resource_size_t n;
-	int n, k = 0;
+	int k = 0, ret;
 
 	while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
-		for (n = res->start; hook && n <= res->end; n++) {
+		for (n = res->start; n <= res->end; n++) {
-			if (request_irq(n, sh_mobile_i2c_isr, 0,
+			ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr,
-					dev_name(&dev->dev), dev)) {
+					  0, dev_name(&dev->dev), dev);
-				for (n--; n >= res->start; n--)
+			if (ret) {
-					free_irq(n, dev);
+				dev_err(&dev->dev, "cannot request IRQ %pa\n", &n);
-
+				return ret;
-				goto rollback;
 			}
 		}
 		k++;
 	}
 
-	if (hook)
+	return k > 0 ? 0 : -ENOENT;
-		return k > 0 ? 0 : -ENOENT;
-
-	ret = 0;
-
- rollback:
-	k--;
-
-	while (k >= 0) {
-		res = platform_get_resource(dev, IORESOURCE_IRQ, k);
-		for (n = res->start; n <= res->end; n++)
-			free_irq(n, dev);
-
-		k--;
-	}
-
-	return ret;
 }
 
 static int sh_mobile_i2c_probe(struct platform_device *dev)
@@ -661,62 +668,64 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	struct sh_mobile_i2c_data *pd;
 	struct i2c_adapter *adap;
 	struct resource *res;
-	int size;
 	int ret;
+	u32 bus_speed;
 
-	pd = kzalloc(sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
+	pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
-	if (pd == NULL) {
+	if (!pd)
-		dev_err(&dev->dev, "cannot allocate private data\n");
 		return -ENOMEM;
-	}
 
-	pd->clk = clk_get(&dev->dev, NULL);
+	pd->clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(pd->clk)) {
 		dev_err(&dev->dev, "cannot get clock\n");
-		ret = PTR_ERR(pd->clk);
+		return PTR_ERR(pd->clk);
-		goto err;
 	}
 
-	ret = sh_mobile_i2c_hook_irqs(dev, 1);
+	ret = sh_mobile_i2c_hook_irqs(dev);
-	if (ret) {
+	if (ret)
-		dev_err(&dev->dev, "cannot request IRQ\n");
+		return ret;
-		goto err_clk;
-	}
 
 	pd->dev = &dev->dev;
 	platform_set_drvdata(dev, pd);
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&dev->dev, "cannot find IO resource\n");
-		ret = -ENOENT;
-		goto err_irq;
-	}
 
-	size = resource_size(res);
+	pd->reg = devm_ioremap_resource(&dev->dev, res);
-
+	if (IS_ERR(pd->reg))
-	pd->reg = ioremap(res->start, size);
+		return PTR_ERR(pd->reg);
-	if (pd->reg == NULL) {
-		dev_err(&dev->dev, "cannot map IO\n");
-		ret = -ENXIO;
-		goto err_irq;
-	}
 
 	/* Use platform data bus speed or STANDARD_MODE */
-	pd->bus_speed = STANDARD_MODE;
+	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
-	if (pdata && pdata->bus_speed)
+	pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
-		pd->bus_speed = pdata->bus_speed;
+
 	pd->clks_per_count = 1;
-	if (pdata && pdata->clks_per_count)
+
-		pd->clks_per_count = pdata->clks_per_count;
+	if (dev->dev.of_node) {
+		const struct of_device_id *match;
+
+		match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
+		if (match) {
+			const struct sh_mobile_dt_config *config;
+
+			config = match->data;
+			pd->clks_per_count = config->clks_per_count;
+		}
+	} else {
+		if (pdata && pdata->bus_speed)
+			pd->bus_speed = pdata->bus_speed;
+		if (pdata && pdata->clks_per_count)
+			pd->clks_per_count = pdata->clks_per_count;
+	}
 
 	/* The IIC blocks on SH-Mobile ARM processors
 	 * come with two new bits in ICIC.
 	 */
-	if (size > 0x17)
+	if (resource_size(res) > 0x17)
 		pd->flags |= IIC_FLAG_HAS_ICIC67;
 
-	sh_mobile_i2c_init(pd);
+	ret = sh_mobile_i2c_init(pd);
+	if (ret)
+		return ret;
 
 	/* Enable Runtime PM for this device.
 	 *
@@ -750,24 +759,14 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret < 0) {
 		dev_err(&dev->dev, "cannot add numbered adapter\n");
-		goto err_all;
+		return ret;
 	}
 
 	dev_info(&dev->dev,
-		 "I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n",
+		 "I2C adapter %d with bus speed %lu Hz (L/H=0x%x/0x%x)\n",
 		 adap->nr, pd->bus_speed, pd->iccl, pd->icch);
 
 	return 0;
-
- err_all:
-	iounmap(pd->reg);
- err_irq:
-	sh_mobile_i2c_hook_irqs(dev, 0);
- err_clk:
-	clk_put(pd->clk);
- err:
-	kfree(pd);
-	return ret;
 }
 
 static int sh_mobile_i2c_remove(struct platform_device *dev)
@@ -775,11 +774,7 @@ static int sh_mobile_i2c_remove(struct platform_device *dev)
 	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
 
 	i2c_del_adapter(&pd->adap);
-	iounmap(pd->reg);
-	sh_mobile_i2c_hook_irqs(dev, 0);
-	clk_put(pd->clk);
 	pm_runtime_disable(&dev->dev);
-	kfree(pd);
 	return 0;
 }
 
@@ -800,12 +795,6 @@ static const struct dev_pm_ops sh_mobile_i2c_dev_pm_ops = {
 	.runtime_resume = sh_mobile_i2c_runtime_nop,
 };
 
-static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
-	{ .compatible = "renesas,rmobile-iic", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
-
 static struct platform_driver sh_mobile_i2c_driver = {
 	.driver		= {
 		.name		= "i2c-sh_mobile",

drivers/i2c/busses/i2c-simtec.c

@@ -77,10 +77,8 @@ static int simtec_i2c_probe(struct platform_device *dev)
 	int ret;
 
 	pd = kzalloc(sizeof(struct simtec_i2c_data), GFP_KERNEL);
-	if (pd == NULL) {
+	if (pd == NULL)
-		dev_err(&dev->dev, "cannot allocate private data\n");
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(dev, pd);
 

drivers/i2c/busses/i2c-sirf.c

@@ -307,7 +307,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 
 	siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL);
 	if (!siic) {
-		dev_err(&pdev->dev, "Can't allocate driver data\n");
 		err = -ENOMEM;
 		goto out;
 	}

drivers/i2c/busses/i2c-st.c

@@ -847,7 +847,7 @@ static int st_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id st_i2c_match[] = {
+static const struct of_device_id st_i2c_match[] = {
 	{ .compatible = "st,comms-ssc-i2c", },
 	{ .compatible = "st,comms-ssc4-i2c", },
 	{},

drivers/i2c/busses/i2c-stu300.c

@@ -868,10 +868,8 @@ static int stu300_probe(struct platform_device *pdev)
 	int ret = 0;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
-	if (!dev) {
+	if (!dev)
-		dev_err(&pdev->dev, "could not allocate device struct\n");
 		return -ENOMEM;
-	}
 
 	bus_nr = pdev->id;
 	dev->clk = devm_clk_get(&pdev->dev, NULL);

drivers/i2c/busses/i2c-tegra.c

@@ -732,10 +732,8 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 	}
 
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
-	if (!i2c_dev) {
+	if (!i2c_dev)
-		dev_err(&pdev->dev, "Could not allocate struct tegra_i2c_dev");
 		return -ENOMEM;
-	}
 
 	i2c_dev->base = base;
 	i2c_dev->div_clk = div_clk;

drivers/i2c/busses/i2c-wmt.c

@@ -379,10 +379,8 @@ static int wmt_i2c_probe(struct platform_device *pdev)
 	u32 clk_rate;
 
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
-	if (!i2c_dev) {
+	if (!i2c_dev)
-		dev_err(&pdev->dev, "device memory allocation failed\n");
 		return -ENOMEM;
-	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
@@ -454,7 +452,7 @@ static int wmt_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id wmt_i2c_dt_ids[] = {
+static const struct of_device_id wmt_i2c_dt_ids[] = {
 	{ .compatible = "wm,wm8505-i2c" },
 	{ /* Sentinel */ },
 };

drivers/i2c/busses/scx200_acb.c

@@ -431,10 +431,8 @@ static struct scx200_acb_iface *scx200_create_iface(const char *text,
 	struct i2c_adapter *adapter;
 
 	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
-	if (!iface) {
+	if (!iface)
-		pr_err("can't allocate memory\n");
 		return NULL;
-	}
 
 	adapter = &iface->adapter;
 	i2c_set_adapdata(adapter, iface);

drivers/i2c/muxes/i2c-mux-pca954x.c

@@ -36,12 +36,11 @@
  */
 
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/i2c/pca954x.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 
 #define PCA954X_MAX_NCHANS 8
@@ -186,7 +185,7 @@ static int pca954x_probe(struct i2c_client *client,
 {
 	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
 	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
-	struct device_node *np = client->dev.of_node;
+	struct gpio_desc *gpio;
 	int num, force, class;
 	struct pca954x *data;
 	int ret;
@@ -200,21 +199,10 @@ static int pca954x_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, data);
 
-	if (IS_ENABLED(CONFIG_OF) && np) {
+	/* Get the mux out of reset if a reset GPIO is specified. */
-		enum of_gpio_flags flags;
+	gpio = devm_gpiod_get(&client->dev, "reset");
-		int gpio;
+	if (!IS_ERR(gpio))
-
+		gpiod_direction_output(gpio, 0);
-		/* Get the mux out of reset if a reset GPIO is specified. */
-		gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
-		if (gpio_is_valid(gpio)) {
-			ret = devm_gpio_request_one(&client->dev, gpio,
-					flags & OF_GPIO_ACTIVE_LOW ?
-					GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
-					"pca954x reset");
-			if (ret < 0)
-				return ret;
-		}
-	}
 
 	/* Write the mux register at addr to verify
 	 * that the mux is in fact present. This also