diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
index ca9c71a531c5..eed922ef42e5 100644
--- a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
+++ b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi
@@ -8,9 +8,11 @@ Description: This file controls the keyboard backlight operation mode, valid
* 0x2 -> AUTO (also called TIMER)
* 0x8 -> ON
* 0x10 -> OFF
- Note that the kernel 3.16 onwards this file accepts all listed
+ Note that from kernel 3.16 onwards this file accepts all listed
parameters, kernel 3.15 only accepts the first two (FN-Z and
AUTO).
+ Also note that toggling this value on type 1 devices, requires
+ a reboot for changes to take effect.
Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_backlight_timeout
@@ -67,15 +69,72 @@ Description: This file shows the current keyboard backlight type,
* 2 -> Type 2, supporting modes TIMER, ON and OFF
Users: KToshiba
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_charge
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the USB Sleep & Charge charging mode, which
+ can be:
+ * 0 -> Disabled (0x00)
+ * 1 -> Alternate (0x09)
+ * 2 -> Auto (0x21)
+ * 3 -> Typical (0x11)
+ Note that from kernel 4.1 onwards this file accepts all listed
+ values, kernel 4.0 only supports the first three.
+ Note that this feature only works when connected to power, if
+ you want to use it under battery, see the entry named
+ "sleep_functions_on_battery"
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/sleep_functions_on_battery
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the USB Sleep Functions under battery, and
+ set the level at which point they will be disabled, accepted
+ values can be:
+ * 0 -> Disabled
+ * 1-100 -> Battery level to disable sleep functions
+ Currently it prints two values, the first one indicates if the
+ feature is enabled or disabled, while the second one shows the
+ current battery level set.
+ Note that when the value is set to disabled, the sleep function
+ will only work when connected to power.
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_rapid_charge
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the USB Rapid Charge state, which can be:
+ * 0 -> Disabled
+ * 1 -> Enabled
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
+
+What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_sleep_music
+Date: January 23, 2015
+KernelVersion: 4.0
+Contact: Azael Avalos <coproscefalo@gmail.com>
+Description: This file controls the Sleep & Music state, which values can be:
+ * 0 -> Disabled
+ * 1 -> Enabled
+ Note that this feature only works when connected to power, if
+ you want to use it under battery, see the entry named
+ "sleep_functions_on_battery"
+Users: KToshiba
+
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/version
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file shows the current version of the driver
+Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/fan
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the state of the internal fan, valid
values are:
@@ -83,8 +142,8 @@ Description: This file controls the state of the internal fan, valid
* 1 -> ON
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/kbd_function_keys
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls the Special Functions (hotkeys) operation
mode, valid values are:
@@ -94,21 +153,29 @@ Description: This file controls the Special Functions (hotkeys) operation
and the hotkeys are accessed via FN-F{1-12}.
In the "Special Functions" mode, the F{1-12} keys trigger the
hotkey and the F{1-12} keys are accessed via FN-F{1-12}.
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/panel_power_on
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
Description: This file controls whether the laptop should turn ON whenever
the LID is opened, valid values are:
* 0 -> Disabled
* 1 -> Enabled
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/usb_three
-Date: February, 2015
-KernelVersion: 3.20
+Date: February 12, 2015
+KernelVersion: 4.0
Contact: Azael Avalos <coproscefalo@gmail.com>
-Description: This file controls whether the USB 3 functionality, valid
- values are:
+Description: This file controls the USB 3 functionality, valid values are:
* 0 -> Disabled (Acts as a regular USB 2)
* 1 -> Enabled (Full USB 3 functionality)
+ Note that toggling this value requires a reboot for changes to
+ take effect.
+Users: KToshiba
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop
new file mode 100644
index 000000000000..8c6a0b8e1131
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop
@@ -0,0 +1,69 @@
+What: /sys/class/leds/dell::kbd_backlight/als_enabled
+Date: December 2014
+KernelVersion: 3.19
+Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+ Pali Rohár <pali.rohar@gmail.com>
+Description:
+ This file allows to control the automatic keyboard
+ illumination mode on some systems that have an ambient
+ light sensor. Write 1 to this file to enable the auto
+ mode, 0 to disable it.
+
+What: /sys/class/leds/dell::kbd_backlight/als_setting
+Date: December 2014
+KernelVersion: 3.19
+Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+ Pali Rohár <pali.rohar@gmail.com>
+Description:
+ This file allows to specifiy the on/off threshold value,
+ as reported by the ambient light sensor.
+
+What: /sys/class/leds/dell::kbd_backlight/start_triggers
+Date: December 2014
+KernelVersion: 3.19
+Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+ Pali Rohár <pali.rohar@gmail.com>
+Description:
+ This file allows to control the input triggers that
+ turn on the keyboard backlight illumination that is
+ disabled because of inactivity.
+ Read the file to see the triggers available. The ones
+ enabled are preceded by '+', those disabled by '-'.
+
+ To enable a trigger, write its name preceded by '+' to
+ this file. To disable a trigger, write its name preceded
+ by '-' instead.
+
+ For example, to enable the keyboard as trigger run:
+ echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+ To disable it:
+ echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
+
+ Note that not all the available triggers can be configured.
+
+What: /sys/class/leds/dell::kbd_backlight/stop_timeout
+Date: December 2014
+KernelVersion: 3.19
+Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
+ Pali Rohár <pali.rohar@gmail.com>
+Description:
+ This file allows to specify the interval after which the
+ keyboard illumination is disabled because of inactivity.
+ The timeouts are expressed in seconds, minutes, hours and
+ days, for which the symbols are 's', 'm', 'h' and 'd'
+ respectively.
+
+ To configure the timeout, write to this file a value along
+ with any the above units. If no unit is specified, the value
+ is assumed to be expressed in seconds.
+
+ For example, to set the timeout to 10 minutes run:
+ echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
+
+ Note that when this file is read, the returned value might be
+ expressed in a different unit than the one used when the timeout
+ was set.
+
+ Also note that only some timeouts are supported and that
+ some systems might fall back to a specific timeout in case
+ an invalid timeout is written to this file.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index fc04c14de4bb..72a150d8f3df 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1355,6 +1355,24 @@ Sysfs notes:
rfkill controller switch "tpacpi_uwb_sw": refer to
Documentation/rfkill.txt for details.
+Adaptive keyboard
+-----------------
+
+sysfs device attribute: adaptive_kbd_mode
+
+This sysfs attribute controls the keyboard "face" that will be shown on the
+Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read
+and set.
+
+1 = Home mode
+2 = Web-browser mode
+3 = Web-conference mode
+4 = Function mode
+5 = Layflat mode
+
+For more details about which buttons will appear depending on the mode, please
+review the laptop's user guide:
+http://www.lenovo.com/shop/americas/content/user_guides/x1carbon_2_ug_en.pdf
Multiple Commands, Module Parameters
------------------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 62cd43e7f56f..2b38266d592a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3066,10 +3066,16 @@ F: drivers/net/fddi/defxx.*
DELL LAPTOP DRIVER
M: Matthew Garrett <mjg59@srcf.ucam.org>
+M: Pali Rohár <pali.rohar@gmail.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/dell-laptop.c
+DELL LAPTOP FREEFALL DRIVER
+M: Pali Rohár <pali.rohar@gmail.com>
+S: Maintained
+F: drivers/platform/x86/dell-smo8800.c
+
DELL LAPTOP SMM DRIVER
M: Guenter Roeck <linux@roeck-us.net>
S: Maintained
@@ -3084,6 +3090,7 @@ F: drivers/firmware/dcdbas.*
DELL WMI EXTRAS DRIVER
M: Matthew Garrett <mjg59@srcf.ucam.org>
+M: Pali Rohár <pali.rohar@gmail.com>
S: Maintained
F: drivers/platform/x86/dell-wmi.c
@@ -9949,10 +9956,23 @@ S: Maintained
F: drivers/platform/x86/topstar-laptop.c
TOSHIBA ACPI EXTRAS DRIVER
+M: Azael Avalos <coproscefalo@gmail.com>
L: platform-driver-x86@vger.kernel.org
-S: Orphan
+S: Maintained
F: drivers/platform/x86/toshiba_acpi.c
+TOSHIBA BLUETOOTH DRIVER
+M: Azael Avalos <coproscefalo@gmail.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/toshiba_bluetooth.c
+
+TOSHIBA HDD ACTIVE PROTECTION SENSOR DRIVER
+M: Azael Avalos <coproscefalo@gmail.com>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: drivers/platform/x86/toshiba_haps.c
+
TOSHIBA SMM DRIVER
M: Jonathan Buzzard <jonathan@buzzard.org.uk>
L: tlinux-users@tce.toshiba-dme.co.jp
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 97527614141b..f9f205cb1f11 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -614,6 +614,7 @@ config ACPI_TOSHIBA
depends on INPUT
depends on RFKILL || RFKILL = n
depends on SERIO_I8042 || SERIO_I8042 = n
+ depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_POLLDEV
select INPUT_SPARSEKMAP
---help---
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
index 66d6d22c239c..6808715003f6 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/vga_switcheroo.h>
+#include <linux/vgaarb.h>
#include <acpi/video.h>
#include <asm/io.h>
@@ -31,6 +32,7 @@ struct apple_gmux_data {
bool indexed;
struct mutex index_lock;
+ struct pci_dev *pdev;
struct backlight_device *bdev;
/* switcheroo data */
@@ -415,6 +417,23 @@ static int gmux_resume(struct device *dev)
return 0;
}
+static struct pci_dev *gmux_get_io_pdev(void)
+{
+ struct pci_dev *pdev = NULL;
+
+ while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev))) {
+ u16 cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if (!(cmd & PCI_COMMAND_IO))
+ continue;
+
+ return pdev;
+ }
+
+ return NULL;
+}
+
static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
struct apple_gmux_data *gmux_data;
@@ -425,6 +444,7 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
int ret = -ENXIO;
acpi_status status;
unsigned long long gpe;
+ struct pci_dev *pdev = NULL;
if (apple_gmux_data)
return -EBUSY;
@@ -475,7 +495,7 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
ver_minor = (version >> 16) & 0xff;
ver_release = (version >> 8) & 0xff;
} else {
- pr_info("gmux device not present\n");
+ pr_info("gmux device not present or IO disabled\n");
ret = -ENODEV;
goto err_release;
}
@@ -483,6 +503,23 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor,
ver_release, (gmux_data->indexed ? "indexed" : "classic"));
+ /*
+ * Apple systems with gmux are EFI based and normally don't use
+ * VGA. In addition changing IO+MEM ownership between IGP and dGPU
+ * disables IO/MEM used for backlight control on some systems.
+ * Lock IO+MEM to GPU with active IO to prevent switch.
+ */
+ pdev = gmux_get_io_pdev();
+ if (pdev && vga_tryget(pdev,
+ VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM)) {
+ pr_err("IO+MEM vgaarb-locking for PCI:%s failed\n",
+ pci_name(pdev));
+ ret = -EBUSY;
+ goto err_release;
+ } else if (pdev)
+ pr_info("locked IO for PCI:%s\n", pci_name(pdev));
+ gmux_data->pdev = pdev;
+
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS);
@@ -574,6 +611,10 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
err_notify:
backlight_device_unregister(bdev);
err_release:
+ if (gmux_data->pdev)
+ vga_put(gmux_data->pdev,
+ VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM);
+ pci_dev_put(pdev);
release_region(gmux_data->iostart, gmux_data->iolen);
err_free:
kfree(gmux_data);
@@ -593,6 +634,11 @@ static void gmux_remove(struct pnp_dev *pnp)
&gmux_notify_handler);
}
+ if (gmux_data->pdev) {
+ vga_put(gmux_data->pdev,
+ VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM);
+ pci_dev_put(gmux_data->pdev);
+ }
backlight_device_unregister(gmux_data->bdev);
release_region(gmux_data->iostart, gmux_data->iolen);
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 3d21efe11d7b..d688d806a8a5 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -2,9 +2,11 @@
* Driver for Dell laptop extras
*
* Copyright (c) Red Hat <mjg@redhat.com>
+ * Copyright (c) 2014 Gabriele Mazzotta <gabriele.mzt@gmail.com>
+ * Copyright (c) 2014 Pali Rohár <pali.rohar@gmail.com>
*
- * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell
- * Inc.
+ * Based on documentation in the libsmbios package:
+ * Copyright (C) 2005-2014 Dell Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -32,6 +34,13 @@
#include "../../firmware/dcdbas.h"
#define BRIGHTNESS_TOKEN 0x7d
+#define KBD_LED_OFF_TOKEN 0x01E1
+#define KBD_LED_ON_TOKEN 0x01E2
+#define KBD_LED_AUTO_TOKEN 0x01E3
+#define KBD_LED_AUTO_25_TOKEN 0x02EA
+#define KBD_LED_AUTO_50_TOKEN 0x02EB
+#define KBD_LED_AUTO_75_TOKEN 0x02EC
+#define KBD_LED_AUTO_100_TOKEN 0x02F6
/* This structure will be modified by the firmware when we enter
* system management mode, hence the volatiles */
@@ -62,6 +71,13 @@ struct calling_interface_structure {
struct quirk_entry {
u8 touchpad_led;
+
+ int needs_kbd_timeouts;
+ /*
+ * Ordered list of timeouts expressed in seconds.
+ * The list must end with -1
+ */
+ int kbd_timeouts[];
};
static struct quirk_entry *quirks;
@@ -76,6 +92,15 @@ static int __init dmi_matched(const struct dmi_system_id *dmi)
return 1;
}
+/*
+ * These values come from Windows utility provided by Dell. If any other value
+ * is used then BIOS silently set timeout to 0 without any error message.
+ */
+static struct quirk_entry quirk_dell_xps13_9333 = {
+ .needs_kbd_timeouts = 1,
+ .kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 },
+};
+
static int da_command_address;
static int da_command_code;
static int da_num_tokens;
@@ -267,6 +292,15 @@ static const struct dmi_system_id dell_quirks[] __initconst = {
},
.driver_data = &quirk_dell_vostro_v130,
},
+ {
+ .callback = dmi_matched,
+ .ident = "Dell XPS13 9333",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"),
+ },
+ .driver_data = &quirk_dell_xps13_9333,
+ },
{ }
};
@@ -331,17 +365,29 @@ static void __init find_tokens(const struct dmi_header *dm, void *dummy)
}
}
-static int find_token_location(int tokenid)
+static int find_token_id(int tokenid)
{
int i;
+
for (i = 0; i < da_num_tokens; i++) {
if (da_tokens[i].tokenID == tokenid)
- return da_tokens[i].location;
+ return i;
}
return -1;
}
+static int find_token_location(int tokenid)
+{
+ int id;
+
+ id = find_token_id(tokenid);
+ if (id == -1)
+ return -1;
+
+ return da_tokens[id].location;
+}
+
static struct calling_interface_buffer *
dell_send_request(struct calling_interface_buffer *buffer, int class,
int select)
@@ -362,6 +408,20 @@ dell_send_request(struct calling_interface_buffer *buffer, int class,
return buffer;
}
+static inline int dell_smi_error(int value)
+{
+ switch (value) {
+ case 0: /* Completed successfully */
+ return 0;
+ case -1: /* Completed with error */
+ return -EIO;
+ case -2: /* Function not supported */
+ return -ENXIO;
+ default: /* Unknown error */
+ return -EINVAL;
+ }
+}
+
/* Derived from information in DellWirelessCtl.cpp:
Class 17, select 11 is radio control. It returns an array of 32-bit values.
@@ -716,7 +776,7 @@ static int dell_send_intensity(struct backlight_device *bd)
else
dell_send_request(buffer, 1, 1);
-out:
+ out:
release_buffer();
return ret;
}
@@ -740,7 +800,7 @@ static int dell_get_intensity(struct backlight_device *bd)
ret = buffer->output[1];
-out:
+ out:
release_buffer();
return ret;
}
@@ -789,6 +849,1018 @@ static void touchpad_led_exit(void)
led_classdev_unregister(&touchpad_led);
}
+/*
+ * Derived from information in smbios-keyboard-ctl:
+ *
+ * cbClass 4
+ * cbSelect 11
+ * Keyboard illumination
+ * cbArg1 determines the function to be performed
+ *
+ * cbArg1 0x0 = Get Feature Information
+ * cbRES1 Standard return codes (0, -1, -2)
+ * cbRES2, word0 Bitmap of user-selectable modes
+ * bit 0 Always off (All systems)
+ * bit 1 Always on (Travis ATG, Siberia)
+ * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG)
+ * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off
+ * bit 4 Auto: Input-activity-based On; input-activity based Off
+ * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off
+ * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off
+ * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off
+ * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off
+ * bits 9-15 Reserved for future use
+ * cbRES2, byte2 Reserved for future use
+ * cbRES2, byte3 Keyboard illumination type
+ * 0 Reserved
+ * 1 Tasklight
+ * 2 Backlight
+ * 3-255 Reserved for future use
+ * cbRES3, byte0 Supported auto keyboard illumination trigger bitmap.
+ * bit 0 Any keystroke
+ * bit 1 Touchpad activity
+ * bit 2 Pointing stick
+ * bit 3 Any mouse
+ * bits 4-7 Reserved for future use
+ * cbRES3, byte1 Supported timeout unit bitmap
+ * bit 0 Seconds
+ * bit 1 Minutes
+ * bit 2 Hours
+ * bit 3 Days
+ * bits 4-7 Reserved for future use
+ * cbRES3, byte2 Number of keyboard light brightness levels
+ * cbRES4, byte0 Maximum acceptable seconds value (0 if seconds not supported).
+ * cbRES4, byte1 Maximum acceptable minutes value (0 if minutes not supported).
+ * cbRES4, byte2 Maximum acceptable hours value (0 if hours not supported).
+ * cbRES4, byte3 Maximum acceptable days value (0 if days not supported)
+ *
+ * cbArg1 0x1 = Get Current State
+ * cbRES1 Standard return codes (0, -1, -2)
+ * cbRES2, word0 Bitmap of current mode state
+ * bit 0 Always off (All systems)
+ * bit 1 Always on (Travis ATG, Siberia)
+ * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG)
+ * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off
+ * bit 4 Auto: Input-activity-based On; input-activity based Off
+ * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off
+ * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off
+ * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off
+ * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off
+ * bits 9-15 Reserved for future use
+ * Note: Only One bit can be set
+ * cbRES2, byte2 Currently active auto keyboard illumination triggers.
+ * bit 0 Any keystroke
+ * bit 1 Touchpad activity
+ * bit 2 Pointing stick
+ * bit 3 Any mouse
+ * bits 4-7 Reserved for future use
+ * cbRES2, byte3 Current Timeout
+ * bits 7:6 Timeout units indicator:
+ * 00b Seconds
+ * 01b Minutes
+ * 10b Hours
+ * 11b Days
+ * bits 5:0 Timeout value (0-63) in sec/min/hr/day
+ * NOTE: A value of 0 means always on (no timeout) if any bits of RES3 byte
+ * are set upon return from the [Get feature information] call.
+ * cbRES3, byte0 Current setting of ALS value that turns the light on or off.
+ * cbRES3, byte1 Current ALS reading
+ * cbRES3, byte2 Current keyboard light level.
+ *
+ * cbArg1 0x2 = Set New State
+ * cbRES1 Standard return codes (0, -1, -2)
+ * cbArg2, word0 Bitmap of current mode state
+ * bit 0 Always off (All systems)
+ * bit 1 Always on (Travis ATG, Siberia)
+ * bit 2 Auto: ALS-based On; ALS-based Off (Travis ATG)
+ * bit 3 Auto: ALS- and input-activity-based On; input-activity based Off
+ * bit 4 Auto: Input-activity-based On; input-activity based Off
+ * bit 5 Auto: Input-activity-based On (illumination level 25%); input-activity based Off
+ * bit 6 Auto: Input-activity-based On (illumination level 50%); input-activity based Off
+ * bit 7 Auto: Input-activity-based On (illumination level 75%); input-activity based Off
+ * bit 8 Auto: Input-activity-based On (illumination level 100%); input-activity based Off
+ * bits 9-15 Reserved for future use
+ * Note: Only One bit can be set
+ * cbArg2, byte2 Desired auto keyboard illumination triggers. Must remain inactive to allow
+ * keyboard to turn off automatically.
+ * bit 0 Any keystroke
+ * bit 1 Touchpad activity
+ * bit 2 Pointing stick
+ * bit 3 Any mouse
+ * bits 4-7 Reserved for future use
+ * cbArg2, byte3 Desired Timeout
+ * bits 7:6 Timeout units indicator:
+ * 00b Seconds
+ * 01b Minutes
+ * 10b Hours
+ * 11b Days
+ * bits 5:0 Timeout value (0-63) in sec/min/hr/day
+ * cbArg3, byte0 Desired setting of ALS value that turns the light on or off.
+ * cbArg3, byte2 Desired keyboard light level.
+ */
+
+
+enum kbd_timeout_unit {
+ KBD_TIMEOUT_SECONDS = 0,
+ KBD_TIMEOUT_MINUTES,
+ KBD_TIMEOUT_HOURS,
+ KBD_TIMEOUT_DAYS,
+};
+
+enum kbd_mode_bit {
+ KBD_MODE_BIT_OFF = 0,
+ KBD_MODE_BIT_ON,
+ KBD_MODE_BIT_ALS,
+ KBD_MODE_BIT_TRIGGER_ALS,
+ KBD_MODE_BIT_TRIGGER,
+ KBD_MODE_BIT_TRIGGER_25,
+ KBD_MODE_BIT_TRIGGER_50,
+ KBD_MODE_BIT_TRIGGER_75,
+ KBD_MODE_BIT_TRIGGER_100,
+};
+
+#define kbd_is_als_mode_bit(bit) \
+ ((bit) == KBD_MODE_BIT_ALS || (bit) == KBD_MODE_BIT_TRIGGER_ALS)
+#define kbd_is_trigger_mode_bit(bit) \
+ ((bit) >= KBD_MODE_BIT_TRIGGER_ALS && (bit) <= KBD_MODE_BIT_TRIGGER_100)
+#define kbd_is_level_mode_bit(bit) \
+ ((bit) >= KBD_MODE_BIT_TRIGGER_25 && (bit) <= KBD_MODE_BIT_TRIGGER_100)
+
+struct kbd_info {
+ u16 modes;
+ u8 type;
+ u8 triggers;
+ u8 levels;
+ u8 seconds;
+ u8 minutes;
+ u8 hours;
+ u8 days;
+};
+
+struct kbd_state {
+ u8 mode_bit;
+ u8 triggers;
+ u8 timeout_value;
+ u8 timeout_unit;
+ u8 als_setting;
+ u8 als_value;
+ u8 level;
+};
+
+static const int kbd_tokens[] = {
+ KBD_LED_OFF_TOKEN,
+ KBD_LED_AUTO_25_TOKEN,
+ KBD_LED_AUTO_50_TOKEN,
+ KBD_LED_AUTO_75_TOKEN,
+ KBD_LED_AUTO_100_TOKEN,
+ KBD_LED_ON_TOKEN,
+};
+
+static u16 kbd_token_bits;
+
+static struct kbd_info kbd_info;
+static bool kbd_als_supported;
+static bool kbd_triggers_supported;
+
+static u8 kbd_mode_levels[16];
+static int kbd_mode_levels_count;
+
+static u8 kbd_previous_level;
+static u8 kbd_previous_mode_bit;
+
+static bool kbd_led_present;
+
+/*
+ * NOTE: there are three ways to set the keyboard backlight level.
+ * First, via kbd_state.mode_bit (assigning KBD_MODE_BIT_TRIGGER_* value).
+ * Second, via kbd_state.level (assigning numerical value <= kbd_info.levels).
+ * Third, via SMBIOS tokens (KBD_LED_* in kbd_tokens)
+ *
+ * There are laptops which support only one of these methods. If we want to
+ * support as many machines as possible we need to implement all three methods.
+ * The first two methods use the kbd_state structure. The third uses SMBIOS
+ * tokens. If kbd_info.levels == 0, the machine does not support setting the
+ * keyboard backlight level via kbd_state.level.
+ */
+
+static int kbd_get_info(struct kbd_info *info)
+{
+ u8 units;
+ int ret;
+
+ get_buffer();
+
+ buffer->input[0] = 0x0;
+ dell_send_request(buffer, 4, 11);
+ ret = buffer->output[0];
+
+ if (ret) {
+ ret = dell_smi_error(ret);
+ goto out;
+ }
+
+ info->modes = buffer->output[1] & 0xFFFF;
+ info->type = (buffer->output[1] >> 24) & 0xFF;
+ info->triggers = buffer->output[2] & 0xFF;
+ units = (buffer->output[2] >> 8) & 0xFF;
+ info->levels = (buffer->output[2] >> 16) & 0xFF;
+
+ if (units & BIT(0))
+ info->seconds = (buffer->output[3] >> 0) & 0xFF;
+ if (units & BIT(1))
+ info->minutes = (buffer->output[3] >> 8) & 0xFF;
+ if (units & BIT(2))
+ info->hours = (buffer->output[3] >> 16) & 0xFF;
+ if (units & BIT(3))
+ info->days = (buffer->output[3] >> 24) & 0xFF;
+
+ out:
+ release_buffer();
+ return ret;
+}
+
+static unsigned int kbd_get_max_level(void)
+{
+ if (kbd_info.levels != 0)
+ return kbd_info.levels;
+ if (kbd_mode_levels_count > 0)
+ return kbd_mode_levels_count - 1;
+ return 0;
+}
+
+static int kbd_get_level(struct kbd_state *state)
+{
+ int i;
+
+ if (kbd_info.levels != 0)
+ return state->level;
+
+ if (kbd_mode_levels_count > 0) {
+ for (i = 0; i < kbd_mode_levels_count; ++i)
+ if (kbd_mode_levels[i] == state->mode_bit)
+ return i;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int kbd_set_level(struct kbd_state *state, u8 level)
+{
+ if (kbd_info.levels != 0) {
+ if (level != 0)
+ kbd_previous_level = level;
+ if (state->level == level)
+ return 0;
+ state->level = level;
+ if (level != 0 && state->mode_bit == KBD_MODE_BIT_OFF)
+ state->mode_bit = kbd_previous_mode_bit;
+ else if (level == 0 && state->mode_bit != KBD_MODE_BIT_OFF) {
+ kbd_previous_mode_bit = state->mode_bit;
+ state->mode_bit = KBD_MODE_BIT_OFF;
+ }
+ return 0;
+ }
+
+ if (kbd_mode_levels_count > 0 && level < kbd_mode_levels_count) {
+ if (level != 0)
+ kbd_previous_level = level;
+ state->mode_bit = kbd_mode_levels[level];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int kbd_get_state(struct kbd_state *state)
+{
+ int ret;
+
+ get_buffer();
+
+ buffer->input[0] = 0x1;
+ dell_send_request(buffer, 4, 11);
+ ret = buffer->output[0];
+
+ if (ret) {
+ ret = dell_smi_error(ret);
+ goto out;
+ }
+
+ state->mode_bit = ffs(buffer->output[1] & 0xFFFF);
+ if (state->mode_bit != 0)
+ state->mode_bit--;
+
+ state->triggers = (buffer->output[1] >> 16) & 0xFF;
+ state->timeout_value = (buffer->output[1] >> 24) & 0x3F;
+ state->timeout_unit = (buffer->output[1] >> 30) & 0x3;
+ state->als_setting = buffer->output[2] & 0xFF;
+ state->als_value = (buffer->output[2] >> 8) & 0xFF;
+ state->level = (buffer->output[2] >> 16) & 0xFF;
+
+ out:
+ release_buffer();
+ return ret;
+}
+
+static int kbd_set_state(struct kbd_state *state)
+{
+ int ret;
+
+ get_buffer();
+ buffer->input[0] = 0x2;
+ buffer->input[1] = BIT(state->mode_bit) & 0xFFFF;
+ buffer->input[1] |= (state->triggers & 0xFF) << 16;
+ buffer->input[1] |= (state->timeout_value & 0x3F) << 24;
+ buffer->input[1] |= (state->timeout_unit & 0x3) << 30;
+ buffer->input[2] = state->als_setting & 0xFF;
+ buffer->input[2] |= (state->level & 0xFF) << 16;
+ dell_send_request(buffer, 4, 11);
+ ret = buffer->output[0];
+ release_buffer();
+
+ return dell_smi_error(ret);
+}
+
+static int kbd_set_state_safe(struct kbd_state *state, struct kbd_state *old)
+{
+ int ret;
+
+ ret = kbd_set_state(state);
+ if (ret == 0)
+ return 0;
+
+ /*
+ * When setting the new state fails,try to restore the previous one.
+ * This is needed on some machines where BIOS sets a default state when
+ * setting a new state fails. This default state could be all off.
+ */
+
+ if (kbd_set_state(old))
+ pr_err("Setting old previous keyboard state failed\n");
+
+ return ret;
+}
+
+static int kbd_set_token_bit(u8 bit)
+{
+ int id;
+ int ret;
+
+ if (bit >= ARRAY_SIZE(kbd_tokens))
+ return -EINVAL;
+
+ id = find_token_id(kbd_tokens[bit]);
+ if (id == -1)
+ return -EINVAL;
+
+ get_buffer();
+ buffer->input[0] = da_tokens[id].location;
+ buffer->input[1] = da_tokens[id].value;
+ dell_send_request(buffer, 1, 0);
+ ret = buffer->output[0];
+ release_buffer();
+
+ return dell_smi_error(ret);
+}
+
+static int kbd_get_token_bit(u8 bit)
+{
+ int id;
+ int ret;
+ int val;
+
+ if (bit >= ARRAY_SIZE(kbd_tokens))
+ return -EINVAL;
+
+ id = find_token_id(kbd_tokens[bit]);
+ if (id == -1)
+ return -EINVAL;
+
+ get_buffer();
+ buffer->input[0] = da_tokens[id].location;
+ dell_send_request(buffer, 0, 0);
+ ret = buffer->output[0];
+ val = buffer->output[1];
+ release_buffer();
+
+ if (ret)
+ return dell_smi_error(ret);
+
+ return (val == da_tokens[id].value);
+}
+
+static int kbd_get_first_active_token_bit(void)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i) {
+ ret = kbd_get_token_bit(i);
+ if (ret == 1)
+ return i;
+ }
+
+ return ret;
+}
+
+static int kbd_get_valid_token_counts(void)
+{
+ return hweight16(kbd_token_bits);
+}
+
+static inline int kbd_init_info(void)
+{
+ struct kbd_state state;
+ int ret;
+ int i;
+
+ ret = kbd_get_info(&kbd_info);
+ if (ret)
+ return ret;
+
+ kbd_get_state(&state);
+
+ /* NOTE: timeout value is stored in 6 bits so max value is 63 */
+ if (kbd_info.seconds > 63)
+ kbd_info.seconds = 63;
+ if (kbd_info.minutes > 63)
+ kbd_info.minutes = 63;
+ if (kbd_info.hours > 63)
+ kbd_info.hours = 63;
+ if (kbd_info.days > 63)
+ kbd_info.days = 63;
+
+ /* NOTE: On tested machines ON mode did not work and caused
+ * problems (turned backlight off) so do not use it
+ */
+ kbd_info.modes &= ~BIT(KBD_MODE_BIT_ON);
+
+ kbd_previous_level = kbd_get_level(&state);
+ kbd_previous_mode_bit = state.mode_bit;
+
+ if (kbd_previous_level == 0 && kbd_get_max_level() != 0)
+ kbd_previous_level = 1;
+
+ if (kbd_previous_mode_bit == KBD_MODE_BIT_OFF) {
+ kbd_previous_mode_bit =
+ ffs(kbd_info.modes & ~BIT(KBD_MODE_BIT_OFF));
+ if (kbd_previous_mode_bit != 0)
+ kbd_previous_mode_bit--;
+ }
+
+ if (kbd_info.modes & (BIT(KBD_MODE_BIT_ALS) |
+ BIT(KBD_MODE_BIT_TRIGGER_ALS)))
+ kbd_als_supported = true;
+
+ if (kbd_info.modes & (
+ BIT(KBD_MODE_BIT_TRIGGER_ALS) | BIT(KBD_MODE_BIT_TRIGGER) |
+ BIT(KBD_MODE_BIT_TRIGGER_25) | BIT(KBD_MODE_BIT_TRIGGER_50) |
+ BIT(KBD_MODE_BIT_TRIGGER_75) | BIT(KBD_MODE_BIT_TRIGGER_100)
+ ))
+ kbd_triggers_supported = true;
+
+ /* kbd_mode_levels[0] is reserved, see below */
+ for (i = 0; i < 16; ++i)
+ if (kbd_is_level_mode_bit(i) && (BIT(i) & kbd_info.modes))
+ kbd_mode_levels[1 + kbd_mode_levels_count++] = i;
+
+ /*
+ * Find the first supported mode and assign to kbd_mode_levels[0].
+ * This should be 0 (off), but we cannot depend on the BIOS to
+ * support 0.
+ */
+ if (kbd_mode_levels_count > 0) {
+ for (i = 0; i < 16; ++i) {
+ if (BIT(i) & kbd_info.modes) {
+ kbd_mode_levels[0] = i;
+ break;
+ }
+ }
+ kbd_mode_levels_count++;
+ }
+
+ return 0;
+
+}
+
+static inline void kbd_init_tokens(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(kbd_tokens); ++i)
+ if (find_token_id(kbd_tokens[i]) != -1)
+ kbd_token_bits |= BIT(i);
+}
+
+static void kbd_init(void)
+{
+ int ret;
+
+ ret = kbd_init_info();
+ kbd_init_tokens();
+
+ if (kbd_token_bits != 0 || ret == 0)
+ kbd_led_present = true;
+}
+
+static ssize_t kbd_led_timeout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kbd_state new_state;
+ struct kbd_state state;
+ bool convert;
+ int value;
+ int ret;
+ char ch;
+ u8 unit;
+ int i;
+
+ ret = sscanf(buf, "%d %c", &value, &ch);
+ if (ret < 1)
+ return -EINVAL;
+ else if (ret == 1)
+ ch = 's';
+
+ if (value < 0)
+ return -EINVAL;
+
+ convert = false;
+
+ switch (ch) {
+ case 's':
+ if (value > kbd_info.seconds)
+ convert = true;
+ unit = KBD_TIMEOUT_SECONDS;
+ break;
+ case 'm':
+ if (value > kbd_info.minutes)
+ convert = true;
+ unit = KBD_TIMEOUT_MINUTES;
+ break;
+ case 'h':
+ if (value > kbd_info.hours)
+ convert = true;
+ unit = KBD_TIMEOUT_HOURS;
+ break;
+ case 'd':
+ if (value > kbd_info.days)
+ convert = true;
+ unit = KBD_TIMEOUT_DAYS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (quirks && quirks->needs_kbd_timeouts)
+ convert = true;
+
+ if (convert) {
+ /* Convert value from current units to seconds */
+ switch (unit) {
+ case KBD_TIMEOUT_DAYS:
+ value *= 24;
+ case KBD_TIMEOUT_HOURS:
+ value *= 60;
+ case KBD_TIMEOUT_MINUTES:
+ value *= 60;
+ unit = KBD_TIMEOUT_SECONDS;
+ }
+
+ if (quirks && quirks->needs_kbd_timeouts) {
+ for (i = 0; quirks->kbd_timeouts[i] != -1; i++) {
+ if (value <= quirks->kbd_timeouts[i]) {
+ value = quirks->kbd_timeouts[i];
+ break;
+ }
+ }
+ }
+
+ if (value <= kbd_info.seconds && kbd_info.seconds) {
+ unit = KBD_TIMEOUT_SECONDS;
+ } else if (value / 60 <= kbd_info.minutes && kbd_info.minutes) {
+ value /= 60;
+ unit = KBD_TIMEOUT_MINUTES;
+ } else if (value / (60 * 60) <= kbd_info.hours && kbd_info.hours) {
+ value /= (60 * 60);
+ unit = KBD_TIMEOUT_HOURS;
+ } else if (value / (60 * 60 * 24) <= kbd_info.days && kbd_info.days) {
+ value /= (60 * 60 * 24);
+ unit = KBD_TIMEOUT_DAYS;
+ } else {
+ return -EINVAL;
+ }
+ }
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ new_state = state;
+ new_state.timeout_value = value;
+ new_state.timeout_unit = unit;
+
+ ret = kbd_set_state_safe(&new_state, &state);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t kbd_led_timeout_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kbd_state state;
+ int ret;
+ int len;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ len = sprintf(buf, "%d", state.timeout_value);
+
+ switch (state.timeout_unit) {
+ case KBD_TIMEOUT_SECONDS:
+ return len + sprintf(buf+len, "s\n");
+ case KBD_TIMEOUT_MINUTES:
+ return len + sprintf(buf+len, "m\n");
+ case KBD_TIMEOUT_HOURS:
+ return len + sprintf(buf+len, "h\n");
+ case KBD_TIMEOUT_DAYS:
+ return len + sprintf(buf+len, "d\n");
+ default:
+ return -EINVAL;
+ }
+
+ return len;
+}
+
+static DEVICE_ATTR(stop_timeout, S_IRUGO | S_IWUSR,
+ kbd_led_timeout_show, kbd_led_timeout_store);
+
+static const char * const kbd_led_triggers[] = {
+ "keyboard",
+ "touchpad",
+ /*"trackstick"*/ NULL, /* NOTE: trackstick is just alias for touchpad */
+ "mouse",
+};
+
+static ssize_t kbd_led_triggers_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kbd_state new_state;
+ struct kbd_state state;
+ bool triggers_enabled = false;
+ int trigger_bit = -1;
+ char trigger[21];
+ int i, ret;
+
+ ret = sscanf(buf, "%20s", trigger);
+ if (ret != 1)
+ return -EINVAL;
+
+ if (trigger[0] != '+' && trigger[0] != '-')
+ return -EINVAL;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ if (kbd_triggers_supported)
+ triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
+
+ if (kbd_triggers_supported) {
+ for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) {
+ if (!(kbd_info.triggers & BIT(i)))
+ continue;
+ if (!kbd_led_triggers[i])
+ continue;
+ if (strcmp(trigger+1, kbd_led_triggers[i]) != 0)
+ continue;
+ if (trigger[0] == '+' &&
+ triggers_enabled && (state.triggers & BIT(i)))
+ return count;
+ if (trigger[0] == '-' &&
+ (!triggers_enabled || !(state.triggers & BIT(i))))
+ return count;
+ trigger_bit = i;
+ break;
+ }
+ }
+
+ if (trigger_bit != -1) {
+ new_state = state;
+ if (trigger[0] == '+')
+ new_state.triggers |= BIT(trigger_bit);
+ else {
+ new_state.triggers &= ~BIT(trigger_bit);
+ /* NOTE: trackstick bit (2) must be disabled when
+ * disabling touchpad bit (1), otherwise touchpad
+ * bit (1) will not be disabled */
+ if (trigger_bit == 1)
+ new_state.triggers &= ~BIT(2);
+ }
+ if ((kbd_info.triggers & new_state.triggers) !=
+ new_state.triggers)
+ return -EINVAL;
+ if (new_state.triggers && !triggers_enabled) {
+ new_state.mode_bit = KBD_MODE_BIT_TRIGGER;
+ kbd_set_level(&new_state, kbd_previous_level);
+ } else if (new_state.triggers == 0) {
+ kbd_set_level(&new_state, 0);
+ }
+ if (!(kbd_info.modes & BIT(new_state.mode_bit)))
+ return -EINVAL;
+ ret = kbd_set_state_safe(&new_state, &state);
+ if (ret)
+ return ret;
+ if (new_state.mode_bit != KBD_MODE_BIT_OFF)
+ kbd_previous_mode_bit = new_state.mode_bit;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t kbd_led_triggers_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kbd_state state;
+ bool triggers_enabled;
+ int level, i, ret;
+ int len = 0;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ len = 0;
+
+ if (kbd_triggers_supported) {
+ triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
+ level = kbd_get_level(&state);
+ for (i = 0; i < ARRAY_SIZE(kbd_led_triggers); ++i) {
+ if (!(kbd_info.triggers & BIT(i)))
+ continue;
+ if (!kbd_led_triggers[i])
+ continue;
+ if ((triggers_enabled || level <= 0) &&
+ (state.triggers & BIT(i)))
+ buf[len++] = '+';
+ else
+ buf[len++] = '-';
+ len += sprintf(buf+len, "%s ", kbd_led_triggers[i]);
+ }
+ }
+
+ if (len)
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static DEVICE_ATTR(start_triggers, S_IRUGO | S_IWUSR,
+ kbd_led_triggers_show, kbd_led_triggers_store);
+
+static ssize_t kbd_led_als_enabled_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kbd_state new_state;
+ struct kbd_state state;
+ bool triggers_enabled = false;
+ int enable;
+ int ret;
+
+ ret = kstrtoint(buf, 0, &enable);
+ if (ret)
+ return ret;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ if (enable == kbd_is_als_mode_bit(state.mode_bit))
+ return count;
+
+ new_state = state;
+
+ if (kbd_triggers_supported)
+ triggers_enabled = kbd_is_trigger_mode_bit(state.mode_bit);
+
+ if (enable) {
+ if (triggers_enabled)
+ new_state.mode_bit = KBD_MODE_BIT_TRIGGER_ALS;
+ else
+ new_state.mode_bit = KBD_MODE_BIT_ALS;
+ } else {
+ if (triggers_enabled) {
+ new_state.mode_bit = KBD_MODE_BIT_TRIGGER;
+ kbd_set_level(&new_state, kbd_previous_level);
+ } else {
+ new_state.mode_bit = KBD_MODE_BIT_ON;
+ }
+ }
+ if (!(kbd_info.modes & BIT(new_state.mode_bit)))
+ return -EINVAL;
+
+ ret = kbd_set_state_safe(&new_state, &state);
+ if (ret)
+ return ret;
+ kbd_previous_mode_bit = new_state.mode_bit;
+
+ return count;
+}
+
+static ssize_t kbd_led_als_enabled_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kbd_state state;
+ bool enabled = false;
+ int ret;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+ enabled = kbd_is_als_mode_bit(state.mode_bit);
+
+ return sprintf(buf, "%d\n", enabled ? 1 : 0);
+}
+
+static DEVICE_ATTR(als_enabled, S_IRUGO | S_IWUSR,
+ kbd_led_als_enabled_show, kbd_led_als_enabled_store);
+
+static ssize_t kbd_led_als_setting_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct kbd_state state;
+ struct kbd_state new_state;
+ u8 setting;
+ int ret;
+
+ ret = kstrtou8(buf, 10, &setting);
+ if (ret)
+ return ret;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ new_state = state;
+ new_state.als_setting = setting;
+
+ ret = kbd_set_state_safe(&new_state, &state);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t kbd_led_als_setting_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct kbd_state state;
+ int ret;
+
+ ret = kbd_get_state(&state);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%d\n", state.als_setting);
+}
+
+static DEVICE_ATTR(als_setting, S_IRUGO | S_IWUSR,
+ kbd_led_als_setting_show, kbd_led_als_setting_store);
+
+static struct attribute *kbd_led_attrs[] = {
+ &dev_attr_stop_timeout.attr,
+ &dev_attr_start_triggers.attr,
+ NULL,
+};
+
+static const struct attribute_group kbd_led_group = {
+ .attrs = kbd_led_attrs,
+};
+
+static struct attribute *kbd_led_als_attrs[] = {
+ &dev_attr_als_enabled.attr,
+ &dev_attr_als_setting.attr,
+ NULL,
+};
+
+static const struct attribute_group kbd_led_als_group = {
+ .attrs = kbd_led_als_attrs,
+};
+
+static const struct attribute_group *kbd_led_groups[] = {
+ &kbd_led_group,
+ &kbd_led_als_group,
+ NULL,
+};
+
+static enum led_brightness kbd_led_level_get(struct led_classdev *led_cdev)
+{
+ int ret;
+ u16 num;
+ struct kbd_state state;
+
+ if (kbd_get_max_level()) {
+ ret = kbd_get_state(&state);
+ if (ret)
+ return 0;
+ ret = kbd_get_level(&state);
+ if (ret < 0)
+ return 0;
+ return ret;
+ }
+
+ if (kbd_get_valid_token_counts()) {
+ ret = kbd_get_first_active_token_bit();
+ if (ret < 0)
+ return 0;
+ for (num = kbd_token_bits; num != 0 && ret > 0; --ret)
+ num &= num - 1; /* clear the first bit set */
+ if (num == 0)
+ return 0;
+ return ffs(num) - 1;
+ }
+
+ pr_warn("Keyboard brightness level control not supported\n");
+ return 0;
+}
+
+static void kbd_led_level_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct kbd_state state;
+ struct kbd_state new_state;
+ u16 num;
+
+ if (kbd_get_max_level()) {
+ if (kbd_get_state(&state))
+ return;
+ new_state = state;
+ if (kbd_set_level(&new_state, value))
+ return;
+ kbd_set_state_safe(&new_state, &state);
+ return;
+ }
+
+ if (kbd_get_valid_token_counts()) {
+ for (num = kbd_token_bits; num != 0 && value > 0; --value)
+ num &= num - 1; /* clear the first bit set */
+ if (num == 0)
+ return;
+ kbd_set_token_bit(ffs(num) - 1);
+ return;
+ }
+
+ pr_warn("Keyboard brightness level control not supported\n");
+}
+
+static struct led_classdev kbd_led = {
+ .name = "dell::kbd_backlight",
+ .brightness_set = kbd_led_level_set,
+ .brightness_get = kbd_led_level_get,
+ .groups = kbd_led_groups,
+};
+
+static int __init kbd_led_init(struct device *dev)
+{
+ kbd_init();
+ if (!kbd_led_present)
+ return -ENODEV;
+ if (!kbd_als_supported)
+ kbd_led_groups[1] = NULL;
+ kbd_led.max_brightness = kbd_get_max_level();
+ if (!kbd_led.max_brightness) {
+ kbd_led.max_brightness = kbd_get_valid_token_counts();
+ if (kbd_led.max_brightness)
+ kbd_led.max_brightness--;
+ }
+ return led_classdev_register(dev, &kbd_led);
+}
+
+static void brightness_set_exit(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ /* Don't change backlight level on exit */
+};
+
+static void kbd_led_exit(void)
+{
+ if (!kbd_led_present)
+ return;
+ kbd_led.brightness_set = brightness_set_exit;
+ led_classdev_unregister(&kbd_led);
+}
+
static int __init dell_init(void)
{
int max_intensity = 0;
@@ -841,6 +1913,8 @@ static int __init dell_init(void)
if (quirks && quirks->touchpad_led)
touchpad_led_init(&platform_device->dev);
+ kbd_led_init(&platform_device->dev);
+
dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL);
if (dell_laptop_dir != NULL)
debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
@@ -908,6 +1982,7 @@ static void __exit dell_exit(void)
debugfs_remove_recursive(dell_laptop_dir);
if (quirks && quirks->touchpad_led)
touchpad_led_exit();
+ kbd_led_exit();
i8042_remove_filter(dell_laptop_i8042_filter);
cancel_delayed_work_sync(&dell_rfkill_work);
backlight_device_unregister(dell_backlight_device);
@@ -924,5 +1999,7 @@ module_init(dell_init);
module_exit(dell_exit);
MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
+MODULE_AUTHOR("Gabriele Mazzotta <gabriele.mzt@gmail.com>");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
MODULE_DESCRIPTION("Dell laptop driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c
index a4a4258f6134..8037c8b46241 100644
--- a/drivers/platform/x86/intel_oaktrail.c
+++ b/drivers/platform/x86/intel_oaktrail.c
@@ -62,7 +62,7 @@
* (1 << 1): Bluetooth enable/disable, RW.
* (1 << 2): GPS enable/disable, RW.
* (1 << 3): WiFi enable/disable, RW.
- * (1 << 4): WWAN (3G) enable/disalbe, RW.
+ * (1 << 4): WWAN (3G) enable/disable, RW.
* (1 << 5): Touchscreen enable/disable, Read Only.
*/
#define OT_EC_DEVICE_STATE_ADDRESS 0xD6
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 3b8ceee7c5cb..7769575345d8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -319,6 +319,7 @@ static struct {
u32 sensors_pdrv_attrs_registered:1;
u32 sensors_pdev_attrs_registered:1;
u32 hotkey_poll_active:1;
+ u32 has_adaptive_kbd:1;
} tp_features;
static struct {
@@ -1911,6 +1912,27 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */
TP_ACPI_HOTKEYSCAN_UNK7,
TP_ACPI_HOTKEYSCAN_UNK8,
+ TP_ACPI_HOTKEYSCAN_MUTE2,
+ TP_ACPI_HOTKEYSCAN_BRIGHTNESS_ZERO,
+ TP_ACPI_HOTKEYSCAN_CLIPPING_TOOL,
+ TP_ACPI_HOTKEYSCAN_CLOUD,
+ TP_ACPI_HOTKEYSCAN_UNK9,
+ TP_ACPI_HOTKEYSCAN_VOICE,
+ TP_ACPI_HOTKEYSCAN_UNK10,
+ TP_ACPI_HOTKEYSCAN_GESTURES,
+ TP_ACPI_HOTKEYSCAN_UNK11,
+ TP_ACPI_HOTKEYSCAN_UNK12,
+ TP_ACPI_HOTKEYSCAN_UNK13,
+ TP_ACPI_HOTKEYSCAN_CONFIG,
+ TP_ACPI_HOTKEYSCAN_NEW_TAB,
+ TP_ACPI_HOTKEYSCAN_RELOAD,
+ TP_ACPI_HOTKEYSCAN_BACK,
+ TP_ACPI_HOTKEYSCAN_MIC_DOWN,
+ TP_ACPI_HOTKEYSCAN_MIC_UP,
+ TP_ACPI_HOTKEYSCAN_MIC_CANCELLATION,
+ TP_ACPI_HOTKEYSCAN_CAMERA_MODE,
+ TP_ACPI_HOTKEYSCAN_ROTATE_DISPLAY,
+
/* Hotkey keymap size */
TPACPI_HOTKEY_MAP_LEN
};
@@ -2647,9 +2669,7 @@ static ssize_t hotkey_enable_store(struct device *dev,
return count;
}
-static struct device_attribute dev_attr_hotkey_enable =
- __ATTR(hotkey_enable, S_IWUSR | S_IRUGO,
- hotkey_enable_show, hotkey_enable_store);
+static DEVICE_ATTR_RW(hotkey_enable);
/* sysfs hotkey mask --------------------------------------------------- */
static ssize_t hotkey_mask_show(struct device *dev,
@@ -2685,9 +2705,7 @@ static ssize_t hotkey_mask_store(struct device *dev,
return (res) ? res : count;
}
-static struct device_attribute dev_attr_hotkey_mask =
- __ATTR(hotkey_mask, S_IWUSR | S_IRUGO,
- hotkey_mask_show, hotkey_mask_store);
+static DEVICE_ATTR_RW(hotkey_mask);
/* sysfs hotkey bios_enabled ------------------------------------------- */
static ssize_t hotkey_bios_enabled_show(struct device *dev,
@@ -2697,8 +2715,7 @@ static ssize_t hotkey_bios_enabled_show(struct device *dev,
return sprintf(buf, "0\n");
}
-static struct device_attribute dev_attr_hotkey_bios_enabled =
- __ATTR(hotkey_bios_enabled, S_IRUGO, hotkey_bios_enabled_show, NULL);
+static DEVICE_ATTR_RO(hotkey_bios_enabled);
/* sysfs hotkey bios_mask ---------------------------------------------- */
static ssize_t hotkey_bios_mask_show(struct device *dev,
@@ -2710,8 +2727,7 @@ static ssize_t hotkey_bios_mask_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_orig_mask);
}
-static struct device_attribute dev_attr_hotkey_bios_mask =
- __ATTR(hotkey_bios_mask, S_IRUGO, hotkey_bios_mask_show, NULL);
+static DEVICE_ATTR_RO(hotkey_bios_mask);
/* sysfs hotkey all_mask ----------------------------------------------- */
static ssize_t hotkey_all_mask_show(struct device *dev,
@@ -2722,8 +2738,7 @@ static ssize_t hotkey_all_mask_show(struct device *dev,
hotkey_all_mask | hotkey_source_mask);
}
-static struct device_attribute dev_attr_hotkey_all_mask =
- __ATTR(hotkey_all_mask, S_IRUGO, hotkey_all_mask_show, NULL);
+static DEVICE_ATTR_RO(hotkey_all_mask);
/* sysfs hotkey recommended_mask --------------------------------------- */
static ssize_t hotkey_recommended_mask_show(struct device *dev,
@@ -2735,9 +2750,7 @@ static ssize_t hotkey_recommended_mask_show(struct device *dev,
& ~hotkey_reserved_mask);
}
-static struct device_attribute dev_attr_hotkey_recommended_mask =
- __ATTR(hotkey_recommended_mask, S_IRUGO,
- hotkey_recommended_mask_show, NULL);
+static DEVICE_ATTR_RO(hotkey_recommended_mask);
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
@@ -2792,9 +2805,7 @@ static ssize_t hotkey_source_mask_store(struct device *dev,
return (rc < 0) ? rc : count;
}
-static struct device_attribute dev_attr_hotkey_source_mask =
- __ATTR(hotkey_source_mask, S_IWUSR | S_IRUGO,
- hotkey_source_mask_show, hotkey_source_mask_store);
+static DEVICE_ATTR_RW(hotkey_source_mask);
/* sysfs hotkey hotkey_poll_freq --------------------------------------- */
static ssize_t hotkey_poll_freq_show(struct device *dev,
@@ -2826,9 +2837,7 @@ static ssize_t hotkey_poll_freq_store(struct device *dev,
return count;
}
-static struct device_attribute dev_attr_hotkey_poll_freq =
- __ATTR(hotkey_poll_freq, S_IWUSR | S_IRUGO,
- hotkey_poll_freq_show, hotkey_poll_freq_store);
+static DEVICE_ATTR_RW(hotkey_poll_freq);
#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
@@ -2849,8 +2858,7 @@ static ssize_t hotkey_radio_sw_show(struct device *dev,
(res == TPACPI_RFK_RADIO_OFF) ? 0 : 1);
}
-static struct device_attribute dev_attr_hotkey_radio_sw =
- __ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL);
+static DEVICE_ATTR_RO(hotkey_radio_sw);
static void hotkey_radio_sw_notify_change(void)
{
@@ -2872,8 +2880,7 @@ static ssize_t hotkey_tablet_mode_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%d\n", !!s);
}
-static struct device_attribute dev_attr_hotkey_tablet_mode =
- __ATTR(hotkey_tablet_mode, S_IRUGO, hotkey_tablet_mode_show, NULL);
+static DEVICE_ATTR_RO(hotkey_tablet_mode);
static void hotkey_tablet_mode_notify_change(void)
{
@@ -2890,8 +2897,7 @@ static ssize_t hotkey_wakeup_reason_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_wakeup_reason);
}
-static struct device_attribute dev_attr_hotkey_wakeup_reason =
- __ATTR(wakeup_reason, S_IRUGO, hotkey_wakeup_reason_show, NULL);
+static DEVICE_ATTR_RO(hotkey_wakeup_reason);
static void hotkey_wakeup_reason_notify_change(void)
{
@@ -2907,9 +2913,7 @@ static ssize_t hotkey_wakeup_hotunplug_complete_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%d\n", hotkey_autosleep_ack);
}
-static struct device_attribute dev_attr_hotkey_wakeup_hotunplug_complete =
- __ATTR(wakeup_hotunplug_complete, S_IRUGO,
- hotkey_wakeup_hotunplug_complete_show, NULL);
+static DEVICE_ATTR_RO(hotkey_wakeup_hotunplug_complete);
static void hotkey_wakeup_hotunplug_complete_notify_change(void)
{
@@ -2917,6 +2921,57 @@ static void hotkey_wakeup_hotunplug_complete_notify_change(void)
"wakeup_hotunplug_complete");
}
+/* sysfs adaptive kbd mode --------------------------------------------- */
+
+static int adaptive_keyboard_get_mode(void);
+static int adaptive_keyboard_set_mode(int new_mode);
+
+enum ADAPTIVE_KEY_MODE {
+ HOME_MODE,
+ WEB_BROWSER_MODE,
+ WEB_CONFERENCE_MODE,
+ FUNCTION_MODE,
+ LAYFLAT_MODE
+};
+
+static ssize_t adaptive_kbd_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int current_mode;
+
+ current_mode = adaptive_keyboard_get_mode();
+ if (current_mode < 0)
+ return current_mode;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", current_mode);
+}
+
+static ssize_t adaptive_kbd_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res;
+
+ if (parse_strtoul(buf, LAYFLAT_MODE, &t))
+ return -EINVAL;
+
+ res = adaptive_keyboard_set_mode(t);
+ return (res < 0) ? res : count;
+}
+
+static DEVICE_ATTR_RW(adaptive_kbd_mode);
+
+static struct attribute *adaptive_kbd_attributes[] = {
+ &dev_attr_adaptive_kbd_mode.attr,
+ NULL
+};
+
+static const struct attribute_group adaptive_kbd_attr_group = {
+ .attrs = adaptive_kbd_attributes,
+};
+
/* --------------------------------------------------------------------- */
static struct attribute *hotkey_attributes[] __initdata = {
@@ -3118,6 +3173,13 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* (assignments unknown, please report if found) */
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+
+ /* No assignments, only used for Adaptive keyboards. */
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
},
/* Generic keymap for Lenovo ThinkPads */
@@ -3174,6 +3236,35 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
/* Extra keys in use since the X240 / T440 / T540 */
KEY_CONFIG, KEY_SEARCH, KEY_SCALE, KEY_FILE,
+
+ /*
+ * These are the adaptive keyboard keycodes for Carbon X1 2014.
+ * The first item in this list is the Mute button which is
+ * emitted with 0x103 through
+ * adaptive_keyboard_hotkey_notify_hotkey() when the sound
+ * symbol is held.
+ * We'll need to offset those by 0x20.
+ */
+ KEY_RESERVED, /* Mute held, 0x103 */
+ KEY_BRIGHTNESS_MIN, /* Backlight off */
+ KEY_RESERVED, /* Clipping tool */
+ KEY_RESERVED, /* Cloud */
+ KEY_RESERVED,
+ KEY_VOICECOMMAND, /* Voice */
+ KEY_RESERVED,
+ KEY_RESERVED, /* Gestures */
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_CONFIG, /* Settings */
+ KEY_RESERVED, /* New tab */
+ KEY_REFRESH, /* Reload */
+ KEY_BACK, /* Back */
+ KEY_RESERVED, /* Microphone down */
+ KEY_RESERVED, /* Microphone up */
+ KEY_RESERVED, /* Microphone cancellation */
+ KEY_RESERVED, /* Camera mode */
+ KEY_RESERVED, /* Rotate display, 0x116 */
},
};
@@ -3227,6 +3318,20 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
if (!tp_features.hotkey)
return 1;
+ /*
+ * Check if we have an adaptive keyboard, like on the
+ * Lenovo Carbon X1 2014 (2nd Gen).
+ */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) == 2) {
+ tp_features.has_adaptive_kbd = true;
+ res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &adaptive_kbd_attr_group);
+ if (res)
+ goto err_exit;
+ }
+ }
+
quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
ARRAY_SIZE(tpacpi_hotkey_qtable));
@@ -3437,6 +3542,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
err_exit:
delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ &adaptive_kbd_attr_group);
+
hotkey_dev_attributes = NULL;
return (res < 0) ? res : 1;
@@ -3449,14 +3557,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
* Will consider support rest of modes in future.
*
*/
-enum ADAPTIVE_KEY_MODE {
- HOME_MODE,
- WEB_BROWSER_MODE,
- WEB_CONFERENCE_MODE,
- FUNCTION_MODE,
- LAYFLAT_MODE
-};
-
static const int adaptive_keyboard_modes[] = {
HOME_MODE,
/* WEB_BROWSER_MODE = 2,
@@ -3466,6 +3566,8 @@ static const int adaptive_keyboard_modes[] = {
#define DFR_CHANGE_ROW 0x101
#define DFR_SHOW_QUICKVIEW_ROW 0x102
+#define FIRST_ADAPTIVE_KEY 0x103
+#define ADAPTIVE_KEY_OFFSET 0x020
/* press Fn key a while second, it will switch to Function Mode. Then
* release Fn key, previous mode be restored.
@@ -3473,6 +3575,32 @@ static const int adaptive_keyboard_modes[] = {
static bool adaptive_keyboard_mode_is_saved;
static int adaptive_keyboard_prev_mode;
+static int adaptive_keyboard_get_mode(void)
+{
+ int mode = 0;
+
+ if (!acpi_evalf(hkey_handle, &mode, "GTRW", "dd", 0)) {
+ pr_err("Cannot read adaptive keyboard mode\n");
+ return -EIO;
+ }
+
+ return mode;
+}
+
+static int adaptive_keyboard_set_mode(int new_mode)
+{
+ if (new_mode < 0 ||
+ new_mode > LAYFLAT_MODE)
+ return -EINVAL;
+
+ if (!acpi_evalf(hkey_handle, NULL, "STRW", "vd", new_mode)) {
+ pr_err("Cannot set adaptive keyboard mode\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
static int adaptive_keyboard_get_next_mode(int mode)
{
size_t i;
@@ -3493,8 +3621,9 @@ static int adaptive_keyboard_get_next_mode(int mode)
static bool adaptive_keyboard_hotkey_notify_hotkey(unsigned int scancode)
{
- u32 current_mode = 0;
+ int current_mode = 0;
int new_mode = 0;
+ int keycode;
switch (scancode) {
case DFR_CHANGE_ROW:
@@ -3502,43 +3631,51 @@ static bool adaptive_keyboard_hotkey_notify_hotkey(unsigned int scancode)
new_mode = adaptive_keyboard_prev_mode;
adaptive_keyboard_mode_is_saved = false;
} else {
- if (!acpi_evalf(
- hkey_handle, ¤t_mode,
- "GTRW", "dd", 0)) {
- pr_err("Cannot read adaptive keyboard mode\n");
+ current_mode = adaptive_keyboard_get_mode();
+ if (current_mode < 0)
return false;
- } else {
- new_mode = adaptive_keyboard_get_next_mode(
- current_mode);
- }
+ new_mode = adaptive_keyboard_get_next_mode(
+ current_mode);
}
- if (!acpi_evalf(hkey_handle, NULL, "STRW", "vd", new_mode)) {
- pr_err("Cannot set adaptive keyboard mode\n");
+ if (adaptive_keyboard_set_mode(new_mode) < 0)
return false;
- }
return true;
case DFR_SHOW_QUICKVIEW_ROW:
- if (!acpi_evalf(hkey_handle,
- &adaptive_keyboard_prev_mode,
- "GTRW", "dd", 0)) {
- pr_err("Cannot read adaptive keyboard mode\n");
+ current_mode = adaptive_keyboard_get_mode();
+ if (current_mode < 0)
return false;
- } else {
- adaptive_keyboard_mode_is_saved = true;
- if (!acpi_evalf(hkey_handle,
- NULL, "STRW", "vd", FUNCTION_MODE)) {
- pr_err("Cannot set adaptive keyboard mode\n");
- return false;
- }
- }
+ adaptive_keyboard_prev_mode = current_mode;
+ adaptive_keyboard_mode_is_saved = true;
+
+ if (adaptive_keyboard_set_mode (FUNCTION_MODE) < 0)
+ return false;
return true;
default:
- return false;
+ if (scancode < FIRST_ADAPTIVE_KEY ||
+ scancode >= FIRST_ADAPTIVE_KEY + TPACPI_HOTKEY_MAP_LEN -
+ ADAPTIVE_KEY_OFFSET) {
+ pr_info("Unhandled adaptive keyboard key: 0x%x\n",
+ scancode);
+ return false;
+ }
+ keycode = hotkey_keycode_map[scancode - FIRST_ADAPTIVE_KEY + ADAPTIVE_KEY_OFFSET];
+ if (keycode != KEY_RESERVED) {
+ mutex_lock(&tpacpi_inputdev_send_mutex);
+
+ input_report_key(tpacpi_inputdev, keycode, 1);
+ input_sync(tpacpi_inputdev);
+
+ input_report_key(tpacpi_inputdev, keycode, 0);
+ input_sync(tpacpi_inputdev);
+
+ mutex_unlock(&tpacpi_inputdev_send_mutex);
+ }
+ return true;
}
}
@@ -3836,28 +3973,21 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
static void hotkey_suspend(void)
{
- int hkeyv;
-
/* Do these on suspend, we get the events on early resume! */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_NONE;
hotkey_autosleep_ack = 0;
/* save previous mode of adaptive keyboard of X1 Carbon */
- if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
- if ((hkeyv >> 8) == 2) {
- if (!acpi_evalf(hkey_handle,
- &adaptive_keyboard_prev_mode,
- "GTRW", "dd", 0)) {
- pr_err("Cannot read adaptive keyboard mode.\n");
- }
+ if (tp_features.has_adaptive_kbd) {
+ if (!acpi_evalf(hkey_handle, &adaptive_keyboard_prev_mode,
+ "GTRW", "dd", 0)) {
+ pr_err("Cannot read adaptive keyboard mode.\n");
}
}
}
static void hotkey_resume(void)
{
- int hkeyv;
-
tpacpi_disable_brightness_delay();
if (hotkey_status_set(true) < 0 ||
@@ -3872,14 +4002,10 @@ static void hotkey_resume(void)
hotkey_poll_setup_safe(false);
/* restore previous mode of adapive keyboard of X1 Carbon */
- if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
- if ((hkeyv >> 8) == 2) {
- if (!acpi_evalf(hkey_handle,
- NULL,
- "STRW", "vd",
- adaptive_keyboard_prev_mode)) {
- pr_err("Cannot set adaptive keyboard mode.\n");
- }
+ if (tp_features.has_adaptive_kbd) {
+ if (!acpi_evalf(hkey_handle, NULL, "STRW", "vd",
+ adaptive_keyboard_prev_mode)) {
+ pr_err("Cannot set adaptive keyboard mode.\n");
}
}
}
@@ -4079,9 +4205,7 @@ static ssize_t bluetooth_enable_store(struct device *dev,
attr, buf, count);
}
-static struct device_attribute dev_attr_bluetooth_enable =
- __ATTR(bluetooth_enable, S_IWUSR | S_IRUGO,
- bluetooth_enable_show, bluetooth_enable_store);
+static DEVICE_ATTR_RW(bluetooth_enable);
/* --------------------------------------------------------------------- */
@@ -4269,9 +4393,7 @@ static ssize_t wan_enable_store(struct device *dev,
attr, buf, count);
}
-static struct device_attribute dev_attr_wan_enable =
- __ATTR(wwan_enable, S_IWUSR | S_IRUGO,
- wan_enable_show, wan_enable_store);
+static DEVICE_ATTR_RW(wan_enable);
/* --------------------------------------------------------------------- */
@@ -5048,8 +5170,7 @@ static ssize_t cmos_command_store(struct device *dev,
return (res) ? res : count;
}
-static struct device_attribute dev_attr_cmos_command =
- __ATTR(cmos_command, S_IWUSR, NULL, cmos_command_store);
+static DEVICE_ATTR_WO(cmos_command);
/* --------------------------------------------------------------------- */
@@ -8017,9 +8138,7 @@ static ssize_t fan_pwm1_enable_store(struct device *dev,
return count;
}
-static struct device_attribute dev_attr_fan_pwm1_enable =
- __ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
- fan_pwm1_enable_show, fan_pwm1_enable_store);
+static DEVICE_ATTR_RW(fan_pwm1_enable);
/* sysfs fan pwm1 ------------------------------------------------------ */
static ssize_t fan_pwm1_show(struct device *dev,
@@ -8079,9 +8198,7 @@ static ssize_t fan_pwm1_store(struct device *dev,
return (rc) ? rc : count;
}
-static struct device_attribute dev_attr_fan_pwm1 =
- __ATTR(pwm1, S_IWUSR | S_IRUGO,
- fan_pwm1_show, fan_pwm1_store);
+static DEVICE_ATTR_RW(fan_pwm1);
/* sysfs fan fan1_input ------------------------------------------------ */
static ssize_t fan_fan1_input_show(struct device *dev,
@@ -8098,9 +8215,7 @@ static ssize_t fan_fan1_input_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%u\n", speed);
}
-static struct device_attribute dev_attr_fan_fan1_input =
- __ATTR(fan1_input, S_IRUGO,
- fan_fan1_input_show, NULL);
+static DEVICE_ATTR_RO(fan_fan1_input);
/* sysfs fan fan2_input ------------------------------------------------ */
static ssize_t fan_fan2_input_show(struct device *dev,
@@ -8117,9 +8232,7 @@ static ssize_t fan_fan2_input_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%u\n", speed);
}
-static struct device_attribute dev_attr_fan_fan2_input =
- __ATTR(fan2_input, S_IRUGO,
- fan_fan2_input_show, NULL);
+static DEVICE_ATTR_RO(fan_fan2_input);
/* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
@@ -8735,8 +8848,7 @@ static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%s\n", TPACPI_NAME);
}
-static struct device_attribute dev_attr_thinkpad_acpi_pdev_name =
- __ATTR(name, S_IRUGO, thinkpad_acpi_pdev_name_show, NULL);
+static DEVICE_ATTR_RO(thinkpad_acpi_pdev_name);
/* --------------------------------------------------------------------- */
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index dbcb7a8915b8..9956b9902bb4 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -51,6 +51,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/uaccess.h>
+#include <acpi/video.h>
MODULE_AUTHOR("John Belmonte");
MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver");
@@ -116,6 +117,7 @@ MODULE_LICENSE("GPL");
#define HCI_KBD_ILLUMINATION 0x0095
#define HCI_ECO_MODE 0x0097
#define HCI_ACCELEROMETER2 0x00a6
+#define HCI_SYSTEM_INFO 0xc000
#define SCI_PANEL_POWER_ON 0x010d
#define SCI_ILLUMINATION 0x014e
#define SCI_USB_SLEEP_CHARGE 0x0150
@@ -129,10 +131,13 @@ MODULE_LICENSE("GPL");
#define HCI_ACCEL_MASK 0x7fff
#define HCI_HOTKEY_DISABLE 0x0b
#define HCI_HOTKEY_ENABLE 0x09
+#define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10
#define HCI_LCD_BRIGHTNESS_BITS 3
#define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS)
#define HCI_LCD_BRIGHTNESS_LEVELS (1 << HCI_LCD_BRIGHTNESS_BITS)
#define HCI_MISC_SHIFT 0x10
+#define HCI_SYSTEM_TYPE1 0x10
+#define HCI_SYSTEM_TYPE2 0x11
#define HCI_VIDEO_OUT_LCD 0x1
#define HCI_VIDEO_OUT_CRT 0x2
#define HCI_VIDEO_OUT_TV 0x4
@@ -147,9 +152,10 @@ MODULE_LICENSE("GPL");
#define SCI_KBD_MODE_OFF 0x10
#define SCI_KBD_TIME_MAX 0x3c001a
#define SCI_USB_CHARGE_MODE_MASK 0xff
-#define SCI_USB_CHARGE_DISABLED 0x30000
-#define SCI_USB_CHARGE_ALTERNATE 0x30009
-#define SCI_USB_CHARGE_AUTO 0x30021
+#define SCI_USB_CHARGE_DISABLED 0x00
+#define SCI_USB_CHARGE_ALTERNATE 0x09
+#define SCI_USB_CHARGE_TYPICAL 0x11
+#define SCI_USB_CHARGE_AUTO 0x21
#define SCI_USB_CHARGE_BAT_MASK 0x7
#define SCI_USB_CHARGE_BAT_LVL_OFF 0x1
#define SCI_USB_CHARGE_BAT_LVL_ON 0x4
@@ -174,6 +180,8 @@ struct toshiba_acpi_dev {
int kbd_mode;
int kbd_time;
int usbsc_bat_level;
+ int usbsc_mode_base;
+ int hotkey_event_type;
unsigned int illumination_supported:1;
unsigned int video_supported:1;
@@ -243,29 +251,6 @@ static const struct key_entry toshiba_acpi_keymap[] = {
{ KE_END, 0 },
};
-/* alternative keymap */
-static const struct dmi_system_id toshiba_alt_keymap_dmi[] = {
- {
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite M840"),
- },
- },
- {
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"),
- },
- },
- {
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A50-A"),
- },
- },
- {}
-};
-
static const struct key_entry toshiba_acpi_alt_keymap[] = {
{ KE_KEY, 0x157, { KEY_MUTE } },
{ KE_KEY, 0x102, { KEY_ZOOMOUT } },
@@ -280,6 +265,14 @@ static const struct key_entry toshiba_acpi_alt_keymap[] = {
{ KE_END, 0 },
};
+/*
+ * List of models which have a broken acpi-video backlight interface and thus
+ * need to use the toshiba (vendor) interface instead.
+ */
+static const struct dmi_system_id toshiba_vendor_backlight_dmi[] = {
+ {}
+};
+
/*
* Utility
*/
@@ -819,6 +812,54 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev,
}
/* Sleep (Charge and Music) utilities support */
+static void toshiba_usb_sleep_charge_available(struct toshiba_acpi_dev *dev)
+{
+ u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
+ u32 out[TCI_WORDS];
+ acpi_status status;
+
+ /* Set the feature to "not supported" in case of error */
+ dev->usb_sleep_charge_supported = 0;
+
+ if (!sci_open(dev))
+ return;
+
+ status = tci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
+ sci_close(dev);
+ return;
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
+ pr_info("USB Sleep and Charge not supported\n");
+ sci_close(dev);
+ return;
+ } else if (out[0] == TOS_SUCCESS) {
+ dev->usbsc_mode_base = out[4];
+ }
+
+ in[5] = SCI_USB_CHARGE_BAT_LVL;
+ status = tci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+ pr_err("ACPI call to get USB Sleep and Charge mode failed\n");
+ sci_close(dev);
+ return;
+ } else if (out[0] == TOS_NOT_SUPPORTED) {
+ pr_info("USB Sleep and Charge not supported\n");
+ sci_close(dev);
+ return;
+ } else if (out[0] == TOS_SUCCESS) {
+ dev->usbsc_bat_level = out[2];
+ /*
+ * If we reach this point, it means that the laptop has support
+ * for this feature and all values are initialized.
+ * Set it as supported.
+ */
+ dev->usb_sleep_charge_supported = 1;
+ }
+
+ sci_close(dev);
+}
+
static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev,
u32 *mode)
{
@@ -934,11 +975,11 @@ static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
status = tci_raw(dev, in, out);
sci_close(dev);
if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
- pr_err("ACPI call to get USB S&C battery level failed\n");
+ pr_err("ACPI call to get USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED ||
out[0] == TOS_INPUT_DATA_ERROR) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("USB Rapid Charge not supported\n");
return -ENODEV;
}
@@ -962,10 +1003,10 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
status = tci_raw(dev, in, out);
sci_close(dev);
if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
- pr_err("ACPI call to set USB S&C battery level failed\n");
+ pr_err("ACPI call to set USB Rapid Charge failed\n");
return -EIO;
} else if (out[0] == TOS_NOT_SUPPORTED) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("USB Rapid Charge not supported\n");
return -ENODEV;
} else if (out[0] == TOS_INPUT_DATA_ERROR) {
return -EIO;
@@ -984,10 +1025,10 @@ static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state)
result = sci_read(dev, SCI_USB_SLEEP_MUSIC, state);
sci_close(dev);
if (result == TOS_FAILURE) {
- pr_err("ACPI call to set USB S&C mode failed\n");
+ pr_err("ACPI call to get Sleep and Music failed\n");
return -EIO;
} else if (result == TOS_NOT_SUPPORTED) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("Sleep and Music not supported\n");
return -ENODEV;
} else if (result == TOS_INPUT_DATA_ERROR) {
return -EIO;
@@ -1006,10 +1047,10 @@ static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state)
result = sci_write(dev, SCI_USB_SLEEP_MUSIC, state);
sci_close(dev);
if (result == TOS_FAILURE) {
- pr_err("ACPI call to set USB S&C mode failed\n");
+ pr_err("ACPI call to set Sleep and Music failed\n");
return -EIO;
} else if (result == TOS_NOT_SUPPORTED) {
- pr_info("USB Sleep and Charge not supported\n");
+ pr_info("Sleep and Music not supported\n");
return -ENODEV;
} else if (result == TOS_INPUT_DATA_ERROR) {
return -EIO;
@@ -1149,6 +1190,28 @@ static int toshiba_usb_three_set(struct toshiba_acpi_dev *dev, u32 state)
return 0;
}
+/* Hotkey Event type */
+static int toshiba_hotkey_event_type_get(struct toshiba_acpi_dev *dev,
+ u32 *type)
+{
+ u32 val1 = 0x03;
+ u32 val2 = 0;
+ u32 result;
+
+ result = hci_read2(dev, HCI_SYSTEM_INFO, &val1, &val2);
+ if (result == TOS_FAILURE) {
+ pr_err("ACPI call to get System type failed\n");
+ return -EIO;
+ } else if (result == TOS_NOT_SUPPORTED) {
+ pr_info("System type not supported\n");
+ return -ENODEV;
+ }
+
+ *type = val2;
+
+ return 0;
+}
+
/* Bluetooth rfkill handlers */
static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
@@ -1973,17 +2036,21 @@ static ssize_t usb_sleep_charge_store(struct device *dev,
* 0 - Disabled
* 1 - Alternate (Non USB conformant devices that require more power)
* 2 - Auto (USB conformant devices)
+ * 3 - Typical
*/
- if (state != 0 && state != 1 && state != 2)
+ if (state != 0 && state != 1 && state != 2 && state != 3)
return -EINVAL;
/* Set the USB charging mode to internal value */
+ mode = toshiba->usbsc_mode_base;
if (state == 0)
- mode = SCI_USB_CHARGE_DISABLED;
+ mode |= SCI_USB_CHARGE_DISABLED;
else if (state == 1)
- mode = SCI_USB_CHARGE_ALTERNATE;
+ mode |= SCI_USB_CHARGE_ALTERNATE;
else if (state == 2)
- mode = SCI_USB_CHARGE_AUTO;
+ mode |= SCI_USB_CHARGE_AUTO;
+ else if (state == 3)
+ mode |= SCI_USB_CHARGE_TYPICAL;
ret = toshiba_usb_sleep_charge_set(toshiba, mode);
if (ret)
@@ -2333,6 +2400,20 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
return 0;
}
+static void toshiba_acpi_enable_special_functions(struct toshiba_acpi_dev *dev)
+{
+ u32 result;
+
+ /*
+ * Re-activate the hotkeys, but this time, we are using the
+ * "Special Functions" mode.
+ */
+ result = hci_write1(dev, HCI_HOTKEY_EVENT,
+ HCI_HOTKEY_SPECIAL_FUNCTIONS);
+ if (result != TOS_SUCCESS)
+ pr_err("Could not enable the Special Function mode\n");
+}
+
static bool toshiba_acpi_i8042_filter(unsigned char data, unsigned char str,
struct serio *port)
{
@@ -2434,10 +2515,22 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
{
- acpi_handle ec_handle;
- int error;
- u32 hci_result;
const struct key_entry *keymap = toshiba_acpi_keymap;
+ acpi_handle ec_handle;
+ u32 events_type;
+ u32 hci_result;
+ int error;
+
+ error = toshiba_acpi_enable_hotkeys(dev);
+ if (error)
+ return error;
+
+ error = toshiba_hotkey_event_type_get(dev, &events_type);
+ if (error) {
+ pr_err("Unable to query Hotkey Event Type\n");
+ return error;
+ }
+ dev->hotkey_event_type = events_type;
dev->hotkey_dev = input_allocate_device();
if (!dev->hotkey_dev)
@@ -2447,8 +2540,14 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
dev->hotkey_dev->phys = "toshiba_acpi/input0";
dev->hotkey_dev->id.bustype = BUS_HOST;
- if (dmi_check_system(toshiba_alt_keymap_dmi))
+ if (events_type == HCI_SYSTEM_TYPE1 ||
+ !dev->kbd_function_keys_supported)
+ keymap = toshiba_acpi_keymap;
+ else if (events_type == HCI_SYSTEM_TYPE2 ||
+ dev->kbd_function_keys_supported)
keymap = toshiba_acpi_alt_keymap;
+ else
+ pr_info("Unknown event type received %x\n", events_type);
error = sparse_keymap_setup(dev->hotkey_dev, keymap, NULL);
if (error)
goto err_free_dev;
@@ -2490,12 +2589,6 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
goto err_remove_filter;
}
- error = toshiba_acpi_enable_hotkeys(dev);
- if (error) {
- pr_info("Unable to enable hotkeys\n");
- goto err_remove_filter;
- }
-
error = input_register_device(dev->hotkey_dev);
if (error) {
pr_info("Unable to register input device\n");
@@ -2541,6 +2634,20 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
ret = get_tr_backlight_status(dev, &enabled);
dev->tr_backlight_supported = !ret;
+ /*
+ * Tell acpi-video-detect code to prefer vendor backlight on all
+ * systems with transflective backlight and on dmi matched systems.
+ */
+ if (dev->tr_backlight_supported ||
+ dmi_check_system(toshiba_vendor_backlight_dmi))
+ acpi_video_dmi_promote_vendor();
+
+ if (acpi_video_backlight_support())
+ return 0;
+
+ /* acpi-video may have loaded before we called dmi_promote_vendor() */
+ acpi_video_unregister_backlight();
+
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
@@ -2624,6 +2731,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
{
struct toshiba_acpi_dev *dev;
const char *hci_method;
+ u32 special_functions;
u32 dummy;
bool bt_present;
int ret = 0;
@@ -2648,6 +2756,16 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
acpi_dev->driver_data = dev;
dev_set_drvdata(&acpi_dev->dev, dev);
+ /* Query the BIOS for supported features */
+
+ /*
+ * The "Special Functions" are always supported by the laptops
+ * with the new keyboard layout, query for its presence to help
+ * determine the keymap layout to use.
+ */
+ ret = toshiba_function_keys_get(dev, &special_functions);
+ dev->kbd_function_keys_supported = !ret;
+
if (toshiba_acpi_setup_keyboard(dev))
pr_info("Unable to activate hotkeys\n");
@@ -2716,8 +2834,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
ret = toshiba_accelerometer_supported(dev);
dev->accelerometer_supported = !ret;
- ret = toshiba_usb_sleep_charge_get(dev, &dummy);
- dev->usb_sleep_charge_supported = !ret;
+ toshiba_usb_sleep_charge_available(dev);
ret = toshiba_usb_rapid_charge_get(dev, &dummy);
dev->usb_rapid_charge_supported = !ret;
@@ -2725,23 +2842,25 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
ret = toshiba_usb_sleep_music_get(dev, &dummy);
dev->usb_sleep_music_supported = !ret;
- ret = toshiba_function_keys_get(dev, &dummy);
- dev->kbd_function_keys_supported = !ret;
-
ret = toshiba_panel_power_on_get(dev, &dummy);
dev->panel_power_on_supported = !ret;
ret = toshiba_usb_three_get(dev, &dummy);
dev->usb_three_supported = !ret;
- /* Determine whether or not BIOS supports fan and video interfaces */
-
ret = get_video_status(dev, &dummy);
dev->video_supported = !ret;
ret = get_fan_status(dev, &dummy);
dev->fan_supported = !ret;
+ /*
+ * Enable the "Special Functions" mode only if they are
+ * supported and if they are activated.
+ */
+ if (dev->kbd_function_keys_supported && special_functions)
+ toshiba_acpi_enable_special_functions(dev);
+
ret = sysfs_create_group(&dev->acpi_dev->dev.kobj,
&toshiba_attr_group);
if (ret) {
@@ -2770,6 +2889,21 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
case 0x80: /* Hotkeys and some system events */
toshiba_acpi_process_hotkeys(dev);
break;
+ case 0x81: /* Dock events */
+ case 0x82:
+ case 0x83:
+ pr_info("Dock event received %x\n", event);
+ break;
+ case 0x88: /* Thermal events */
+ pr_info("Thermal event received\n");
+ break;
+ case 0x8f: /* LID closed */
+ case 0x90: /* LID is closed and Dock has been ejected */
+ break;
+ case 0x8c: /* SATA power events */
+ case 0x8b:
+ pr_info("SATA power event received %x\n", event);
+ break;
case 0x92: /* Keyboard backlight mode changed */
/* Update sysfs entries */
ret = sysfs_update_group(&acpi_dev->dev.kobj,
@@ -2777,17 +2911,19 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event)
if (ret)
pr_err("Unable to update sysfs entries\n");
break;
- case 0x81: /* Unknown */
- case 0x82: /* Unknown */
- case 0x83: /* Unknown */
- case 0x8c: /* Unknown */
+ case 0x85: /* Unknown */
+ case 0x8d: /* Unknown */
case 0x8e: /* Unknown */
- case 0x8f: /* Unknown */
- case 0x90: /* Unknown */
+ case 0x94: /* Unknown */
+ case 0x95: /* Unknown */
default:
pr_info("Unknown event received %x\n", event);
break;
}
+
+ acpi_bus_generate_netlink_event(acpi_dev->pnp.device_class,
+ dev_name(&acpi_dev->dev),
+ event, 0);
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
index 2cb1ea62b4a7..249800763362 100644
--- a/drivers/platform/x86/toshiba_bluetooth.c
+++ b/drivers/platform/x86/toshiba_bluetooth.c
@@ -2,6 +2,7 @@
* Toshiba Bluetooth Enable Driver
*
* Copyright (C) 2009 Jes Sorensen <Jes.Sorensen@gmail.com>
+ * Copyright (C) 2015 Azael Avalos <coproscefalo@gmail.com>
*
* Thanks to Matthew Garrett for background info on ACPI innards which
* normal people aren't meant to understand :-)
@@ -25,6 +26,10 @@
#include <linux/types.h>
#include <linux/acpi.h>
+#define BT_KILLSWITCH_MASK 0x01
+#define BT_PLUGGED_MASK 0x40
+#define BT_POWER_MASK 0x80
+
MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
MODULE_DESCRIPTION("Toshiba Laptop ACPI Bluetooth Enable Driver");
MODULE_LICENSE("GPL");
@@ -57,32 +62,107 @@ static struct acpi_driver toshiba_bt_rfkill_driver = {
.drv.pm = &toshiba_bt_pm,
};
+static int toshiba_bluetooth_present(acpi_handle handle)
+{
+ acpi_status result;
+ u64 bt_present;
+
+ /*
+ * Some Toshiba laptops may have a fake TOS6205 device in
+ * their ACPI BIOS, so query the _STA method to see if there
+ * is really anything there.
+ */
+ result = acpi_evaluate_integer(handle, "_STA", NULL, &bt_present);
+ if (ACPI_FAILURE(result)) {
+ pr_err("ACPI call to query Bluetooth presence failed");
+ return -ENXIO;
+ } else if (!bt_present) {
+ pr_info("Bluetooth device not present\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int toshiba_bluetooth_status(acpi_handle handle)
+{
+ acpi_status result;
+ u64 status;
+
+ result = acpi_evaluate_integer(handle, "BTST", NULL, &status);
+ if (ACPI_FAILURE(result)) {
+ pr_err("Could not get Bluetooth device status\n");
+ return -ENXIO;
+ }
+
+ pr_info("Bluetooth status %llu\n", status);
+
+ return status;
+}
static int toshiba_bluetooth_enable(acpi_handle handle)
{
- acpi_status res1, res2;
- u64 result;
+ acpi_status result;
+ bool killswitch;
+ bool powered;
+ bool plugged;
+ int status;
/*
* Query ACPI to verify RFKill switch is set to 'on'.
* If not, we return silently, no need to report it as
* an error.
*/
- res1 = acpi_evaluate_integer(handle, "BTST", NULL, &result);
- if (ACPI_FAILURE(res1))
- return res1;
- if (!(result & 0x01))
+ status = toshiba_bluetooth_status(handle);
+ if (status < 0)
+ return status;
+
+ killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
+ powered = (status & BT_POWER_MASK) ? true : false;
+ plugged = (status & BT_PLUGGED_MASK) ? true : false;
+
+ if (!killswitch)
+ return 0;
+ /*
+ * This check ensures to only enable the device if it is powered
+ * off or detached, as some recent devices somehow pass the killswitch
+ * test, causing a loop enabling/disabling the device, see bug 93911.
+ */
+ if (powered || plugged)
return 0;
- pr_info("Re-enabling Toshiba Bluetooth\n");
- res1 = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
- res2 = acpi_evaluate_object(handle, "BTPO", NULL, NULL);
- if (!ACPI_FAILURE(res1) || !ACPI_FAILURE(res2))
- return 0;
+ result = acpi_evaluate_object(handle, "AUSB", NULL, NULL);
+ if (ACPI_FAILURE(result)) {
+ pr_err("Could not attach USB Bluetooth device\n");
+ return -ENXIO;
+ }
- pr_warn("Failed to re-enable Toshiba Bluetooth\n");
+ result = acpi_evaluate_object(handle, "BTPO", NULL, NULL);
+ if (ACPI_FAILURE(result)) {
+ pr_err("Could not power ON Bluetooth device\n");
+ return -ENXIO;
+ }
- return -ENODEV;
+ return 0;
+}
+
+static int toshiba_bluetooth_disable(acpi_handle handle)
+{
+ acpi_status result;
+
+ result = acpi_evaluate_object(handle, "BTPF", NULL, NULL);
+ if (ACPI_FAILURE(result)) {
+ pr_err("Could not power OFF Bluetooth device\n");
+ return -ENXIO;
+ }
+
+ result = acpi_evaluate_object(handle, "DUSB", NULL, NULL);
+ if (ACPI_FAILURE(result)) {
+ pr_err("Could not detach USB Bluetooth device\n");
+ return -ENXIO;
+ }
+
+ return 0;
}
static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event)
@@ -99,23 +179,18 @@ static int toshiba_bt_resume(struct device *dev)
static int toshiba_bt_rfkill_add(struct acpi_device *device)
{
- acpi_status status;
- u64 bt_present;
- int result = -ENODEV;
+ int result;
- /*
- * Some Toshiba laptops may have a fake TOS6205 device in
- * their ACPI BIOS, so query the _STA method to see if there
- * is really anything there, before trying to enable it.
- */
- status = acpi_evaluate_integer(device->handle, "_STA", NULL,
- &bt_present);
+ result = toshiba_bluetooth_present(device->handle);
+ if (result)
+ return result;
- if (!ACPI_FAILURE(status) && bt_present) {
- pr_info("Detected Toshiba ACPI Bluetooth device - "
- "installing RFKill handler\n");
- result = toshiba_bluetooth_enable(device->handle);
- }
+ pr_info("Toshiba ACPI Bluetooth device driver\n");
+
+ /* Enable the BT device */
+ result = toshiba_bluetooth_enable(device->handle);
+ if (result)
+ return result;
return result;
}
@@ -123,7 +198,7 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device)
static int toshiba_bt_rfkill_remove(struct acpi_device *device)
{
/* clean up */
- return 0;
+ return toshiba_bluetooth_disable(device->handle);
}
module_acpi_driver(toshiba_bt_rfkill_driver);
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 737e56d46f61..aac47573f9ed 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -45,7 +45,6 @@ MODULE_LICENSE("GPL");
#define ACPI_WMI_CLASS "wmi"
-static DEFINE_MUTEX(wmi_data_lock);
static LIST_HEAD(wmi_block_list);
struct guid_block {
@@ -240,10 +239,10 @@ static bool find_guid(const char *guid_string, struct wmi_block **out)
if (memcmp(block->guid, guid_input, 16) == 0) {
if (out)
*out = wblock;
- return 1;
+ return true;
}
}
- return 0;
+ return false;
}
static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable)