Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

spi_lm70llp parport adapter driver

Browse source 
This adds a driver for the LM70-LLP parport adapter, which is an eval board
for the LM70 temperature sensor.  For those without that board, it may be a
simpler example of a parport-to-SPI adapter then spi_butterfly.

Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com>

Doc, coding style, and interface updates; build fixes.  Minor rename.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Kaiwan N Billimoria 2007-07-17 04:04:05 -07:00 committed by Linus Torvalds
parent 4917d92780
commit 78961a5740
4 changed files with 440 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

69
Documentation/spi/spi-lm70llp Normal file
View file

@ -0,0 +1,69 @@
spi_lm70llp : LM70-LLP parport-to-SPI adapter
==============================================
Supported board/chip:
* National Semiconductor LM70 LLP evaluation board
Datasheet: http://www.national.com/pf/LM/LM70.html
Author:
Kaiwan N Billimoria <kaiwan@designergraphix.com>
Description
-----------
This driver provides glue code connecting a National Semiconductor LM70 LLP
temperature sensor evaluation board to the kernel's SPI core subsystem.
In effect, this driver turns the parallel port interface on the eval board
into a SPI bus with a single device, which will be driven by the generic
LM70 driver (drivers/hwmon/lm70.c).
The hardware interfacing on the LM70 LLP eval board is as follows:
Parallel LM70 LLP
Port Direction JP2 Header
----------- --------- ----------------
D0 2 - -
D1 3 --> V+ 5
D2 4 --> V+ 5
D3 5 --> V+ 5
D4 6 --> V+ 5
D5 7 --> nCS 8
D6 8 --> SCLK 3
D7 9 --> SI/O 5
GND 25 - GND 7
Select 13 <-- SI/O 1
----------- --------- ----------------
Note that since the LM70 uses a "3-wire" variant of SPI, the SI/SO pin
is connected to both pin D7 (as Master Out) and Select (as Master In)
using an arrangment that lets either the parport or the LM70 pull the
pin low. This can't be shared with true SPI devices, but other 3-wire
devices might share the same SI/SO pin.
The bitbanger routine in this driver (lm70_txrx) is called back from
the bound "hwmon/lm70" protocol driver through its sysfs hook, using a
spi_write_then_read() call. It performs Mode 0 (SPI/Microwire) bitbanging.
The lm70 driver then inteprets the resulting digital temperature value
and exports it through sysfs.
A "gotcha": National Semiconductor's LM70 LLP eval board circuit schematic
shows that the SI/O line from the LM70 chip is connected to the base of a
transistor Q1 (and also a pullup, and a zener diode to D7); while the
collector is tied to VCC.
Interpreting this circuit, when the LM70 SI/O line is High (or tristate
and not grounded by the host via D7), the transistor conducts and switches
the collector to zero, which is reflected on pin 13 of the DB25 parport
connector. When SI/O is Low (driven by the LM70 or the host) on the other
hand, the transistor is cut off and the voltage tied to it's collector is
reflected on pin 13 as a High level.
So: the getmiso inline routine in this driver takes this fact into account,
inverting the value read at pin 13.
Thanks to
---------
o David Brownell for mentoring the SPI-side driver development.
o Dr.Craig Hollabaugh for the (early) "manual" bitbanging driver version.
o Nadir Billimoria for help interpreting the circuit schematic.

9
drivers/spi/Kconfig
View file

@ -107,6 +107,15 @@ config SPI_IMX
This enables using the Freescale iMX SPI controller in master
mode.
config SPI_LM70_LLP
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
depends on SPI_MASTER && PARPORT && EXPERIMENTAL
select SPI_BITBANG
help
This driver supports the NS LM70 LLP Evaluation Board,
which interfaces to an LM70 temperature sensor using
a parallel port.
config SPI_MPC52xx_PSC
tristate "Freescale MPC52xx PSC SPI controller"
depends on SPI_MASTER && PPC_MPC52xx && EXPERIMENTAL

1
drivers/spi/Makefile
View file

@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o

361
drivers/spi/spi_lm70llp.c Normal file
View file

@ -0,0 +1,361 @@
/*
* spi_lm70llp.c - driver for lm70llp eval board for the LM70 sensor
*
* Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/parport.h>
#include <linux/sysfs.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
/*
* The LM70 communicates with a host processor using a 3-wire variant of
* the SPI/Microwire bus interface. This driver specifically supports an
* NS LM70 LLP Evaluation Board, interfacing to a PC using its parallel
* port to bitbang an SPI-parport bridge. Accordingly, this is an SPI
* master controller driver. The hwmon/lm70 driver is a "SPI protocol
* driver", layered on top of this one and usable without the lm70llp.
*
* The LM70 is a temperature sensor chip from National Semiconductor; its
* datasheet is available at http://www.national.com/pf/LM/LM70.html
*
* Also see Documentation/spi/spi-lm70llp. The SPI<->parport code here is
* (heavily) based on spi-butterfly by David Brownell.
*
* The LM70 LLP connects to the PC parallel port in the following manner:
*
* Parallel LM70 LLP
* Port Direction JP2 Header
* ----------- --------- ------------
* D0 2 - -
* D1 3 --> V+ 5
* D2 4 --> V+ 5
* D3 5 --> V+ 5
* D4 6 --> V+ 5
* D5 7 --> nCS 8
* D6 8 --> SCLK 3
* D7 9 --> SI/O 5
* GND 25 - GND 7
* Select 13 <-- SI/O 1
*
* Note that parport pin 13 actually gets inverted by the transistor
* arrangement which lets either the parport or the LM70 drive the
* SI/SO signal.
*/
#define DRVNAME "spi-lm70llp"
#define lm70_INIT 0xBE
#define SIO 0x10
#define nCS 0x20
#define SCLK 0x40
/*-------------------------------------------------------------------------*/
struct spi_lm70llp {
struct spi_bitbang bitbang;
struct parport *port;
struct pardevice *pd;
struct spi_device *spidev_lm70;
struct spi_board_info info;
struct class_device *cdev;
};
/* REVISIT : ugly global ; provides "exclusive open" facility */
static struct spi_lm70llp *lm70llp;
/*-------------------------------------------------------------------*/
static inline struct spi_lm70llp *spidev_to_pp(struct spi_device *spi)
{
return spi->controller_data;
}
/*---------------------- LM70 LLP eval board-specific inlines follow */
/* NOTE: we don't actually need to reread the output values, since they'll
* still be what we wrote before. Plus, going through parport builds in
* a ~1ms/operation delay; these SPI transfers could easily be faster.
*/
static inline void deassertCS(struct spi_lm70llp *pp)
{
u8 data = parport_read_data(pp->port);
parport_write_data(pp->port, data | nCS);
}
static inline void assertCS(struct spi_lm70llp *pp)
{
u8 data = parport_read_data(pp->port);
parport_write_data(pp->port, data & ~nCS);
}
static inline void clkHigh(struct spi_lm70llp *pp)
{
u8 data = parport_read_data(pp->port);
parport_write_data(pp->port, data | SCLK);
}
static inline void clkLow(struct spi_lm70llp *pp)
{
u8 data = parport_read_data(pp->port);
parport_write_data(pp->port, data & ~SCLK);
}
/*------------------------- SPI-LM70-specific inlines ----------------------*/
static inline void spidelay(unsigned d)
{
udelay(d);
}
static inline void setsck(struct spi_device *s, int is_on)
{
struct spi_lm70llp *pp = spidev_to_pp(s);
if (is_on)
clkHigh(pp);
else
clkLow(pp);
}
static inline void setmosi(struct spi_device *s, int is_on)
{
/* FIXME update D7 ... this way we can put the chip
* into shutdown mode and read the manufacturer ID,
* but we can't put it back into operational mode.
*/
}
/*
* getmiso:
* Why do we return 0 when the SIO line is high and vice-versa?
* The fact is, the lm70 eval board from NS (which this driver drives),
* is wired in just such a way : when the lm70's SIO goes high, a transistor
* switches it to low reflecting this on the parport (pin 13), and vice-versa.
*/
static inline int getmiso(struct spi_device *s)
{
struct spi_lm70llp *pp = spidev_to_pp(s);
return ((SIO == (parport_read_status(pp->port) & SIO)) ? 0 : 1 );
}
/*--------------------------------------------------------------------*/
#define EXPAND_BITBANG_TXRX 1
#include <linux/spi/spi_bitbang.h>
static void lm70_chipselect(struct spi_device *spi, int value)
{
struct spi_lm70llp *pp = spidev_to_pp(spi);
if (value)
assertCS(pp);
else
deassertCS(pp);
}
/*
* Our actual bitbanger routine.
*/
static u32 lm70_txrx(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits)
{
static u32 sio=0;
static int first_time=1;
/* First time: perform SPI bitbang and return the LSB of
* the result of the SPI call.
*/
if (first_time) {
sio = bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
first_time=0;
return (sio & 0x00ff);
}
/* Return the MSB of the result of the SPI call */
else {
first_time=1;
return (sio >> 8);
}
}
static void spi_lm70llp_attach(struct parport *p)
{
struct pardevice *pd;
struct spi_lm70llp *pp;
struct spi_master *master;
int status;
if (lm70llp) {
printk(KERN_WARNING
"%s: spi_lm70llp instance already loaded. Aborting.\n",
DRVNAME);
return;
}
/* TODO: this just _assumes_ a lm70 is there ... no probe;
* the lm70 driver could verify it, reading the manf ID.
*/
master = spi_alloc_master(p->physport->dev, sizeof *pp);
if (!master) {
status = -ENOMEM;
goto out_fail;
}
pp = spi_master_get_devdata(master);
master->bus_num = -1; /* dynamic alloc of a bus number */
master->num_chipselect = 1;
/*
* SPI and bitbang hookup.
*/
pp->bitbang.master = spi_master_get(master);
pp->bitbang.chipselect = lm70_chipselect;
pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx;
pp->bitbang.flags = SPI_3WIRE;
/*
* Parport hookup
*/
pp->port = p;
pd = parport_register_device(p, DRVNAME,
NULL, NULL, NULL,
PARPORT_FLAG_EXCL, pp);
if (!pd) {
status = -ENOMEM;
goto out_free_master;
}
pp->pd = pd;
status = parport_claim(pd);
if (status < 0)
goto out_parport_unreg;
/*
* Start SPI ...
*/
status = spi_bitbang_start(&pp->bitbang);
if (status < 0) {
printk(KERN_WARNING
"%s: spi_bitbang_start failed with status %d\n",
DRVNAME, status);
goto out_off_and_release;
}
/*
* The modalias name MUST match the device_driver name
* for the bus glue code to match and subsequently bind them.
* We are binding to the generic drivers/hwmon/lm70.c device
* driver.
*/
strcpy(pp->info.modalias, "lm70");
pp->info.max_speed_hz = 6 * 1000 * 1000;
pp->info.chip_select = 0;
pp->info.mode = SPI_3WIRE | SPI_MODE_0;
/* power up the chip, and let the LM70 control SI/SO */
parport_write_data(pp->port, lm70_INIT);
/* Enable access to our primary data structure via
* the board info's (void *)controller_data.
*/
pp->info.controller_data = pp;
pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
if (pp->spidev_lm70)
dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
pp->spidev_lm70->dev.bus_id);
else {
printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME);
status = -ENODEV;
goto out_bitbang_stop;
}
pp->spidev_lm70->bits_per_word = 16;
lm70llp = pp;
return;
out_bitbang_stop:
spi_bitbang_stop(&pp->bitbang);
out_off_and_release:
/* power down */
parport_write_data(pp->port, 0);
mdelay(10);
parport_release(pp->pd);
out_parport_unreg:
parport_unregister_device(pd);
out_free_master:
(void) spi_master_put(master);
out_fail:
pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status);
}
static void spi_lm70llp_detach(struct parport *p)
{
struct spi_lm70llp *pp;
if (!lm70llp || lm70llp->port != p)
return;
pp = lm70llp;
spi_bitbang_stop(&pp->bitbang);
/* power down */
parport_write_data(pp->port, 0);
msleep(10);
parport_release(pp->pd);
parport_unregister_device(pp->pd);
(void) spi_master_put(pp->bitbang.master);
lm70llp = NULL;
}
static struct parport_driver spi_lm70llp_drv = {
.name = DRVNAME,
.attach = spi_lm70llp_attach,
.detach = spi_lm70llp_detach,
};
static int __init init_spi_lm70llp(void)
{
return parport_register_driver(&spi_lm70llp_drv);
}
module_init(init_spi_lm70llp);
static void __exit cleanup_spi_lm70llp(void)
{
parport_unregister_driver(&spi_lm70llp_drv);
}
module_exit(cleanup_spi_lm70llp);
MODULE_AUTHOR("Kaiwan N Billimoria <kaiwan@designergraphix.com>");
MODULE_DESCRIPTION(
"Parport adapter for the National Semiconductor LM70 LLP eval board");
MODULE_LICENSE("GPL");