diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 5e87ad58c0b5..f51f28531b8d 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -82,6 +82,11 @@
</sect1>
</chapter>
+ <chapter id="fs_events">
+ <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+ </chapter>
+
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c6..a22ecf48f255 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
- Datasheet: -
+ Datasheet:
+ http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
Author:
Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
Description
-----------
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
The driver auto-detects the chips listed above, but can be manually instantiated
to support other JC 42.4 compliant chips.
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
which applies to all limits. This register can be written by writing into
temp1_crit_hyst. Other hysteresis attributes are read-only.
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
Sysfs entries
-------------
temp1_input Temperature (RO)
-temp1_min Minimum temperature (RW)
-temp1_max Maximum temperature (RW)
-temp1_crit Critical high temperature (RW)
+temp1_min Minimum temperature (RO or RW)
+temp1_max Maximum temperature (RO or RW)
+temp1_crit Critical high temperature (RO or RW)
-temp1_crit_hyst Critical hysteresis temperature (RW)
+temp1_crit_hyst Critical hysteresis temperature (RO or RW)
temp1_max_hyst Maximum hysteresis temperature (RO)
temp1_min_alarm Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a6..d2b56a4fd1f5 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
Prefix: 'k10temp'
Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+ http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
-----------
This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
All these processors have a sensor, but on those for Socket F or AM2+,
the sensor may return inconsistent values (erratum 319). The driver
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89835a4766a6..f4a04c0c7edc 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
and is between 256 and 4096 characters. It is defined in the file
./include/asm/setup.h as COMMAND_LINE_SIZE.
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
- crashkernel=nn[KMG]@ss[KMG]
- [KNL] Reserve a chunk of physical memory to
- hold a kernel to switch to with kexec on panic.
+ crashkernel=size[KMG][@offset[KMG]]
+ [KNL] Using kexec, Linux can switch to a 'crash kernel'
+ upon panic. This parameter reserves the physical
+ memory region [offset, offset + size] for that kernel
+ image. If '@offset' is omitted, then a suitable offset
+ is selected automatically. Check
+ Documentation/kdump/kdump.txt for further details.
crashkernel=range1:size1[,range2:size2,...][@offset]
[KNL] Same as above, but depends on the memory
in the running system. The syntax of range is
start-[end] where start and end are both
a memory unit (amount[KMG]). See also
- Documentation/kdump/kdump.txt for a example.
+ Documentation/kdump/kdump.txt for an example.
cs89x0_dma= [HW,NET]
Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
6 (KERN_INFO) informational
7 (KERN_DEBUG) debug-level messages
- log_buf_len=n Sets the size of the printk ring buffer, in bytes.
- Format: { n | nk | nM }
- n must be a power of two. The default size
- is set in the kernel config file.
+ log_buf_len=n[KMG] Sets the size of the printk ring buffer,
+ in bytes. n must be a power of two. The default
+ size is set in the kernel config file.
logo.nologo [FB] Disables display of the built-in Linux logo.
This may be used to provide more screen space for
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c751e6a6..6f99e1260db8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@ S: Supported
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
-M: Daniel Walker <dwalker@codeaurora.org>
+M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@ M: Guenter Roeck <guenter.roeck@ericsson.com>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
diff --git a/Makefile b/Makefile
index 5e40aa2acbff..26d7d824db51 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fbc5b775f895..b166b1d845d7 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -347,6 +347,7 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_assp,
&pxa25x_device_pwm0,
&pxa25x_device_pwm1,
+ &pxa_device_asoc_platform,
};
static struct sys_device pxa25x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index c31e601eb49c..b9b1e5c2b290 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev)
goto err_rfk_alloc;
}
- rfkill_set_led_trigger_name(rfk, "tosa-bt");
-
rc = rfkill_register(rfk);
if (rc)
goto err_rfkill;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index af152e70cfcf..f2582ec300d9 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -875,6 +875,11 @@ static struct platform_device sharpsl_rom_device = {
.dev.platform_data = &sharpsl_rom_data,
};
+static struct platform_device wm9712_device = {
+ .name = "wm9712-codec",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
@@ -885,6 +890,7 @@ static struct platform_device *devices[] __initdata = {
&tosaled_device,
&tosa_bt_device,
&sharpsl_rom_device,
+ &wm9712_device,
};
static void tosa_poweroff(void)
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 203dd5a18bd5..058dab4482a1 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5p6442/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5P6442 - Memory map definitions
@@ -16,56 +16,61 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5P6442_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+#define S5P6442_PA_SDRAM 0x20000000
-#define S5P6442_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+#define S5P6442_PA_I2S0 0xC0B00000
+#define S5P6442_PA_I2S1 0xF2200000
-#define S5P6442_PA_GPIO (0xE0200000)
+#define S5P6442_PA_CHIPID 0xE0000000
-#define S5P6442_PA_VIC0 (0xE4000000)
-#define S5P6442_PA_VIC1 (0xE4100000)
-#define S5P6442_PA_VIC2 (0xE4200000)
+#define S5P6442_PA_SYSCON 0xE0100000
-#define S5P6442_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5P6442_PA_SROMC
+#define S5P6442_PA_GPIO 0xE0200000
+
+#define S5P6442_PA_VIC0 0xE4000000
+#define S5P6442_PA_VIC1 0xE4100000
+#define S5P6442_PA_VIC2 0xE4200000
+
+#define S5P6442_PA_SROMC 0xE7000000
#define S5P6442_PA_MDMA 0xE8000000
#define S5P6442_PA_PDMA 0xE9000000
-#define S5P6442_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5P6442_PA_TIMER
+#define S5P6442_PA_TIMER 0xEA000000
-#define S5P6442_PA_SYSTIMER (0xEA100000)
+#define S5P6442_PA_SYSTIMER 0xEA100000
-#define S5P6442_PA_WATCHDOG (0xEA200000)
+#define S5P6442_PA_WATCHDOG 0xEA200000
-#define S5P6442_PA_UART (0xEC000000)
+#define S5P6442_PA_UART 0xEC000000
-#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800)
-#define S5P_SZ_UART SZ_256
-
-#define S5P6442_PA_IIC0 (0xEC100000)
-
-#define S5P6442_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+#define S5P6442_PA_IIC0 0xEC100000
#define S5P6442_PA_SPI 0xEC300000
-/* I2S */
-#define S5P6442_PA_I2S0 0xC0B00000
-#define S5P6442_PA_I2S1 0xF2200000
-
-/* PCM */
#define S5P6442_PA_PCM0 0xF2400000
#define S5P6442_PA_PCM1 0xF2500000
-/* compatibiltiy defines. */
-#define S3C_PA_WDT S5P6442_PA_WATCHDOG
-#define S3C_PA_UART S5P6442_PA_UART
+/* Compatibiltiy Defines */
+
#define S3C_PA_IIC S5P6442_PA_IIC0
+#define S3C_PA_WDT S5P6442_PA_WATCHDOG
+
+#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+#define S5P_PA_SROMC S5P6442_PA_SROMC
+#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+#define S5P_PA_TIMER S5P6442_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART S5P6442_PA_UART
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index a9365e5ba614..95c91257c7ca 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
*
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - Memory map definitions
@@ -16,30 +16,63 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5P64X0_PA_SDRAM (0x20000000)
+#define S5P64X0_PA_SDRAM 0x20000000
+
+#define S5P64X0_PA_CHIPID 0xE0000000
+
+#define S5P64X0_PA_SYSCON 0xE0100000
+
+#define S5P64X0_PA_GPIO 0xE0308000
+
+#define S5P64X0_PA_VIC0 0xE4000000
+#define S5P64X0_PA_VIC1 0xE4100000
+
+#define S5P64X0_PA_SROMC 0xE7000000
+
+#define S5P64X0_PA_PDMA 0xE9000000
+
+#define S5P64X0_PA_TIMER 0xEA000000
+#define S5P64X0_PA_RTC 0xEA100000
+#define S5P64X0_PA_WDT 0xEA200000
+
+#define S5P6440_PA_IIC0 0xEC104000
+#define S5P6440_PA_IIC1 0xEC20F000
+#define S5P6450_PA_IIC0 0xEC100000
+#define S5P6450_PA_IIC1 0xEC200000
+
+#define S5P64X0_PA_SPI0 0xEC400000
+#define S5P64X0_PA_SPI1 0xEC500000
+
+#define S5P64X0_PA_HSOTG 0xED100000
+
+#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_I2S 0xF2000000
+#define S5P6450_PA_I2S1 0xF2800000
+#define S5P6450_PA_I2S2 0xF2900000
+
+#define S5P64X0_PA_PCM 0xF2100000
+
+#define S5P64X0_PA_ADC 0xF3000000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC S5P6440_PA_IIC0
+#define S3C_PA_IIC1 S5P6440_PA_IIC1
+#define S3C_PA_RTC S5P64X0_PA_RTC
+#define S3C_PA_WDT S5P64X0_PA_WDT
-#define S5P64X0_PA_CHIPID (0xE0000000)
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
-
-#define S5P64X0_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
-
-#define S5P64X0_PA_GPIO (0xE0308000)
-
-#define S5P64X0_PA_VIC0 (0xE4000000)
-#define S5P64X0_PA_VIC1 (0xE4100000)
-
-#define S5P64X0_PA_SROMC (0xE7000000)
#define S5P_PA_SROMC S5P64X0_PA_SROMC
-
-#define S5P64X0_PA_PDMA (0xE9000000)
-
-#define S5P64X0_PA_TIMER (0xEA000000)
+#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
#define S5P_PA_TIMER S5P64X0_PA_TIMER
-#define S5P64X0_PA_RTC (0xEA100000)
+#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
-#define S5P64X0_PA_WDT (0xEA200000)
+/* UART */
#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
@@ -53,36 +86,4 @@
#define S5P_SZ_UART SZ_256
-#define S5P6440_PA_IIC0 (0xEC104000)
-#define S5P6440_PA_IIC1 (0xEC20F000)
-#define S5P6450_PA_IIC0 (0xEC100000)
-#define S5P6450_PA_IIC1 (0xEC200000)
-
-#define S5P64X0_PA_SPI0 (0xEC400000)
-#define S5P64X0_PA_SPI1 (0xEC500000)
-
-#define S5P64X0_PA_HSOTG (0xED100000)
-
-#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-
-#define S5P64X0_PA_I2S (0xF2000000)
-#define S5P6450_PA_I2S1 0xF2800000
-#define S5P6450_PA_I2S2 0xF2900000
-
-#define S5P64X0_PA_PCM (0xF2100000)
-
-#define S5P64X0_PA_ADC (0xF3000000)
-
-/* compatibiltiy defines. */
-
-#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
-#define S3C_PA_IIC S5P6440_PA_IIC0
-#define S3C_PA_IIC1 S5P6440_PA_IIC1
-#define S3C_PA_RTC S5P64X0_PA_RTC
-#define S3C_PA_WDT S5P64X0_PA_WDT
-
-#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
-
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 328467b346aa..ccbe6b767f7d 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -1,4 +1,7 @@
/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
@@ -16,145 +19,115 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
- * S3C_VA_SYS S3C_ADDR(0x00100000) system control
- * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
- * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
- * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
- * S3C_VA_UART S3C_ADDR(0x01000000) UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
- *
- */
+#define S5PC100_PA_SDRAM 0x20000000
-#define S5PC100_PA_ONENAND_BUF (0xB0000000)
-#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
+#define S5PC100_PA_ONENAND 0xE7100000
+#define S5PC100_PA_ONENAND_BUF 0xB0000000
-/* Chip ID */
+#define S5PC100_PA_CHIPID 0xE0000000
-#define S5PC100_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5PC100_PA_SYSCON 0xE0100000
-#define S5PC100_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5PC100_PA_OTHERS 0xE0200000
-#define S5PC100_PA_OTHERS (0xE0200000)
-#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
+#define S5PC100_PA_GPIO 0xE0300000
-#define S5PC100_PA_GPIO (0xE0300000)
-#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S5PC100_PA_VIC0 0xE4000000
+#define S5PC100_PA_VIC1 0xE4100000
+#define S5PC100_PA_VIC2 0xE4200000
-/* Interrupt */
-#define S5PC100_PA_VIC0 (0xE4000000)
-#define S5PC100_PA_VIC1 (0xE4100000)
-#define S5PC100_PA_VIC2 (0xE4200000)
-#define S5PC100_VA_VIC S3C_VA_IRQ
-#define S5PC100_VA_VIC_OFFSET 0x10000
-#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_SROMC 0xE7000000
-#define S5PC100_PA_SROMC (0xE7000000)
-#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5PC100_PA_CFCON 0xE7800000
-#define S5PC100_PA_ONENAND (0xE7100000)
+#define S5PC100_PA_MDMA 0xE8100000
+#define S5PC100_PA_PDMA0 0xE9000000
+#define S5PC100_PA_PDMA1 0xE9200000
-#define S5PC100_PA_CFCON (0xE7800000)
+#define S5PC100_PA_TIMER 0xEA000000
+#define S5PC100_PA_SYSTIMER 0xEA100000
+#define S5PC100_PA_WATCHDOG 0xEA200000
+#define S5PC100_PA_RTC 0xEA300000
-/* DMA */
-#define S5PC100_PA_MDMA (0xE8100000)
-#define S5PC100_PA_PDMA0 (0xE9000000)
-#define S5PC100_PA_PDMA1 (0xE9200000)
+#define S5PC100_PA_UART 0xEC000000
-/* Timer */
-#define S5PC100_PA_TIMER (0xEA000000)
-#define S5P_PA_TIMER S5PC100_PA_TIMER
+#define S5PC100_PA_IIC0 0xEC100000
+#define S5PC100_PA_IIC1 0xEC200000
-#define S5PC100_PA_SYSTIMER (0xEA100000)
+#define S5PC100_PA_SPI0 0xEC300000
+#define S5PC100_PA_SPI1 0xEC400000
+#define S5PC100_PA_SPI2 0xEC500000
-#define S5PC100_PA_WATCHDOG (0xEA200000)
-#define S5PC100_PA_RTC (0xEA300000)
+#define S5PC100_PA_USB_HSOTG 0xED200000
+#define S5PC100_PA_USB_HSPHY 0xED300000
-#define S5PC100_PA_UART (0xEC000000)
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
-#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00)
-#define S5P_SZ_UART SZ_256
+#define S5PC100_PA_FB 0xEE000000
-#define S5PC100_PA_IIC0 (0xEC100000)
-#define S5PC100_PA_IIC1 (0xEC200000)
+#define S5PC100_PA_FIMC0 0xEE200000
+#define S5PC100_PA_FIMC1 0xEE300000
+#define S5PC100_PA_FIMC2 0xEE400000
-/* SPI */
-#define S5PC100_PA_SPI0 0xEC300000
-#define S5PC100_PA_SPI1 0xEC400000
-#define S5PC100_PA_SPI2 0xEC500000
+#define S5PC100_PA_I2S0 0xF2000000
+#define S5PC100_PA_I2S1 0xF2100000
+#define S5PC100_PA_I2S2 0xF2200000
-/* USB HS OTG */
-#define S5PC100_PA_USB_HSOTG (0xED200000)
-#define S5PC100_PA_USB_HSPHY (0xED300000)
+#define S5PC100_PA_AC97 0xF2300000
-#define S5PC100_PA_FB (0xEE000000)
+#define S5PC100_PA_PCM0 0xF2400000
+#define S5PC100_PA_PCM1 0xF2500000
-#define S5PC100_PA_FIMC0 (0xEE200000)
-#define S5PC100_PA_FIMC1 (0xEE300000)
-#define S5PC100_PA_FIMC2 (0xEE400000)
+#define S5PC100_PA_SPDIF 0xF2600000
-#define S5PC100_PA_I2S0 (0xF2000000)
-#define S5PC100_PA_I2S1 (0xF2100000)
-#define S5PC100_PA_I2S2 (0xF2200000)
+#define S5PC100_PA_TSADC 0xF3000000
-#define S5PC100_PA_AC97 0xF2300000
+#define S5PC100_PA_KEYPAD 0xF3100000
-/* PCM */
-#define S5PC100_PA_PCM0 0xF2400000
-#define S5PC100_PA_PCM1 0xF2500000
+/* Compatibiltiy Defines */
-#define S5PC100_PA_SPDIF 0xF2600000
+#define S3C_PA_FB S5PC100_PA_FB
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
+#define S3C_PA_IIC S5PC100_PA_IIC0
+#define S3C_PA_IIC1 S5PC100_PA_IIC1
+#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_ONENAND S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
+#define S3C_PA_RTC S5PC100_PA_RTC
+#define S3C_PA_TSADC S5PC100_PA_TSADC
+#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
+#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S5PC100_PA_TSADC (0xF3000000)
+#define S5P_PA_CHIPID S5PC100_PA_CHIPID
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S5P_PA_SROMC S5PC100_PA_SROMC
+#define S5P_PA_SYSCON S5PC100_PA_SYSCON
+#define S5P_PA_TIMER S5PC100_PA_TIMER
-/* KEYPAD */
-#define S5PC100_PA_KEYPAD (0xF3100000)
+#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
-#define S5PC100_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5PC100_PA_SDRAM
+#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PC100_PA_UART
-#define S3C_PA_IIC S5PC100_PA_IIC0
-#define S3C_PA_IIC1 S5PC100_PA_IIC1
-#define S3C_PA_FB S5PC100_PA_FB
-#define S3C_PA_G2D S5PC100_PA_G2D
-#define S3C_PA_G3D S5PC100_PA_G3D
-#define S3C_PA_JPEG S5PC100_PA_JPEG
-#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
-#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0)
-#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1)
-#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2)
-#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
-#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
-#define S3C_PA_WDT S5PC100_PA_WATCHDOG
-#define S3C_PA_TSADC S5PC100_PA_TSADC
-#define S3C_PA_ONENAND S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
-#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
-#define S3C_PA_RTC S5PC100_PA_RTC
+/* UART */
-#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_UART S5PC100_PA_UART
-#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
-#endif /* __ASM_ARCH_C100_MAP_H */
+#define S5P_SZ_UART SZ_256
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 3611492ad681..1dd58836fd4f 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv210/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - Memory map definitions
@@ -16,122 +16,120 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#define S5PV210_PA_SROM_BANK5 (0xA8000000)
+#define S5PV210_PA_SDRAM 0x20000000
-#define S5PC110_PA_ONENAND (0xB0000000)
-#define S5P_PA_ONENAND S5PC110_PA_ONENAND
+#define S5PV210_PA_SROM_BANK5 0xA8000000
-#define S5PC110_PA_ONENAND_DMA (0xB0600000)
-#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
+#define S5PC110_PA_ONENAND 0xB0000000
+#define S5PC110_PA_ONENAND_DMA 0xB0600000
-#define S5PV210_PA_CHIPID (0xE0000000)
-#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5PV210_PA_CHIPID 0xE0000000
-#define S5PV210_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5PV210_PA_SYSCON 0xE0100000
-#define S5PV210_PA_GPIO (0xE0200000)
+#define S5PV210_PA_GPIO 0xE0200000
-/* SPI */
-#define S5PV210_PA_SPI0 0xE1300000
-#define S5PV210_PA_SPI1 0xE1400000
+#define S5PV210_PA_SPDIF 0xE1100000
-#define S5PV210_PA_KEYPAD (0xE1600000)
+#define S5PV210_PA_SPI0 0xE1300000
+#define S5PV210_PA_SPI1 0xE1400000
-#define S5PV210_PA_IIC0 (0xE1800000)
-#define S5PV210_PA_IIC1 (0xFAB00000)
-#define S5PV210_PA_IIC2 (0xE1A00000)
+#define S5PV210_PA_KEYPAD 0xE1600000
-#define S5PV210_PA_TIMER (0xE2500000)
-#define S5P_PA_TIMER S5PV210_PA_TIMER
+#define S5PV210_PA_ADC 0xE1700000
-#define S5PV210_PA_SYSTIMER (0xE2600000)
+#define S5PV210_PA_IIC0 0xE1800000
+#define S5PV210_PA_IIC1 0xFAB00000
+#define S5PV210_PA_IIC2 0xE1A00000
-#define S5PV210_PA_WATCHDOG (0xE2700000)
+#define S5PV210_PA_AC97 0xE2200000
-#define S5PV210_PA_RTC (0xE2800000)
-#define S5PV210_PA_UART (0xE2900000)
+#define S5PV210_PA_PCM0 0xE2300000
+#define S5PV210_PA_PCM1 0xE1200000
+#define S5PV210_PA_PCM2 0xE2B00000
-#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00)
+#define S5PV210_PA_TIMER 0xE2500000
+#define S5PV210_PA_SYSTIMER 0xE2600000
+#define S5PV210_PA_WATCHDOG 0xE2700000
+#define S5PV210_PA_RTC 0xE2800000
-#define S5P_SZ_UART SZ_256
+#define S5PV210_PA_UART 0xE2900000
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5PV210_PA_SROMC 0xE8000000
-#define S5PV210_PA_SROMC (0xE8000000)
-#define S5P_PA_SROMC S5PV210_PA_SROMC
+#define S5PV210_PA_CFCON 0xE8200000
-#define S5PV210_PA_CFCON (0xE8200000)
+#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
-#define S5PV210_PA_MDMA 0xFA200000
-#define S5PV210_PA_PDMA0 0xE0900000
-#define S5PV210_PA_PDMA1 0xE0A00000
+#define S5PV210_PA_HSOTG 0xEC000000
+#define S5PV210_PA_HSPHY 0xEC100000
-#define S5PV210_PA_FB (0xF8000000)
+#define S5PV210_PA_IIS0 0xEEE30000
+#define S5PV210_PA_IIS1 0xE2100000
+#define S5PV210_PA_IIS2 0xE2A00000
-#define S5PV210_PA_FIMC0 (0xFB200000)
-#define S5PV210_PA_FIMC1 (0xFB300000)
-#define S5PV210_PA_FIMC2 (0xFB400000)
+#define S5PV210_PA_DMC0 0xF0000000
+#define S5PV210_PA_DMC1 0xF1400000
-#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_VIC0 0xF2000000
+#define S5PV210_PA_VIC1 0xF2100000
+#define S5PV210_PA_VIC2 0xF2200000
+#define S5PV210_PA_VIC3 0xF2300000
-#define S5PV210_PA_HSOTG (0xEC000000)
-#define S5PV210_PA_HSPHY (0xEC100000)
+#define S5PV210_PA_FB 0xF8000000
-#define S5PV210_PA_VIC0 (0xF2000000)
-#define S5PV210_PA_VIC1 (0xF2100000)
-#define S5PV210_PA_VIC2 (0xF2200000)
-#define S5PV210_PA_VIC3 (0xF2300000)
+#define S5PV210_PA_MDMA 0xFA200000
+#define S5PV210_PA_PDMA0 0xE0900000
+#define S5PV210_PA_PDMA1 0xE0A00000
-#define S5PV210_PA_SDRAM (0x20000000)
-#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+#define S5PV210_PA_MIPI_CSIS 0xFA600000
-/* S/PDIF */
-#define S5PV210_PA_SPDIF 0xE1100000
+#define S5PV210_PA_FIMC0 0xFB200000
+#define S5PV210_PA_FIMC1 0xFB300000
+#define S5PV210_PA_FIMC2 0xFB400000
-/* I2S */
-#define S5PV210_PA_IIS0 0xEEE30000
-#define S5PV210_PA_IIS1 0xE2100000
-#define S5PV210_PA_IIS2 0xE2A00000
+/* Compatibiltiy Defines */
-/* PCM */
-#define S5PV210_PA_PCM0 0xE2300000
-#define S5PV210_PA_PCM1 0xE1200000
-#define S5PV210_PA_PCM2 0xE2B00000
+#define S3C_PA_FB S5PV210_PA_FB
+#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
+#define S3C_PA_IIC S5PV210_PA_IIC0
+#define S3C_PA_IIC1 S5PV210_PA_IIC1
+#define S3C_PA_IIC2 S5PV210_PA_IIC2
+#define S3C_PA_RTC S5PV210_PA_RTC
+#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
+#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-/* AC97 */
-#define S5PV210_PA_AC97 0xE2200000
+#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
+#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S5P_PA_ONENAND S5PC110_PA_ONENAND
+#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA
+#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+#define S5P_PA_SROMC S5PV210_PA_SROMC
+#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5P_PA_TIMER S5PV210_PA_TIMER
-#define S5PV210_PA_ADC (0xE1700000)
+#define SAMSUNG_PA_ADC S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
-#define S5PV210_PA_DMC0 (0xF0000000)
-#define S5PV210_PA_DMC1 (0xF1400000)
+/* UART */
-#define S5PV210_PA_MIPI_CSIS 0xFA600000
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PV210_PA_UART
-#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC S5PV210_PA_IIC0
-#define S3C_PA_IIC1 S5PV210_PA_IIC1
-#define S3C_PA_IIC2 S5PV210_PA_IIC2
-#define S3C_PA_FB S5PV210_PA_FB
-#define S3C_PA_RTC S5PV210_PA_RTC
-#define S3C_PA_WDT S5PV210_PA_WATCHDOG
-#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
-#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
+#define S3C_PA_UART S5PV210_PA_UART
-#define SAMSUNG_PA_ADC S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 461aa035afc0..557add4fc56c 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -149,7 +149,7 @@ static struct regulator_init_data aquila_ldo2_data = {
static struct regulator_init_data aquila_ldo3_data = {
.constraints = {
- .name = "VUSB/MIPI_1.1V",
+ .name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
@@ -197,7 +197,7 @@ static struct regulator_init_data aquila_ldo7_data = {
static struct regulator_init_data aquila_ldo8_data = {
.constraints = {
- .name = "VUSB/VADC_3.3V",
+ .name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
@@ -207,7 +207,7 @@ static struct regulator_init_data aquila_ldo8_data = {
static struct regulator_init_data aquila_ldo9_data = {
.constraints = {
- .name = "VCC/VCAM_2.8V",
+ .name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
@@ -381,9 +381,12 @@ static struct max8998_platform_data aquila_max8998_pdata = {
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_max_voltage1 = 1200000,
- .buck1_max_voltage2 = 1200000,
- .buck2_max_voltage = 1200000,
+ .buck1_voltage1 = 1200000,
+ .buck1_voltage2 = 1200000,
+ .buck1_voltage3 = 1200000,
+ .buck1_voltage4 = 1200000,
+ .buck2_voltage1 = 1200000,
+ .buck2_voltage2 = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e22d5112fd44..056f5c769b0a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -288,7 +288,7 @@ static struct regulator_init_data goni_ldo2_data = {
static struct regulator_init_data goni_ldo3_data = {
.constraints = {
- .name = "VUSB/MIPI_1.1V",
+ .name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
@@ -337,7 +337,7 @@ static struct regulator_init_data goni_ldo7_data = {
static struct regulator_init_data goni_ldo8_data = {
.constraints = {
- .name = "VUSB/VADC_3.3V",
+ .name = "VUSB+VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
@@ -347,7 +347,7 @@ static struct regulator_init_data goni_ldo8_data = {
static struct regulator_init_data goni_ldo9_data = {
.constraints = {
- .name = "VCC/VCAM_2.8V",
+ .name = "VCC+VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
@@ -521,9 +521,12 @@ static struct max8998_platform_data goni_max8998_pdata = {
.buck1_set1 = S5PV210_GPH0(3),
.buck1_set2 = S5PV210_GPH0(4),
.buck2_set3 = S5PV210_GPH0(5),
- .buck1_max_voltage1 = 1200000,
- .buck1_max_voltage2 = 1200000,
- .buck2_max_voltage = 1200000,
+ .buck1_voltage1 = 1200000,
+ .buck1_voltage2 = 1200000,
+ .buck1_voltage3 = 1200000,
+ .buck1_voltage4 = 1200000,
+ .buck2_voltage1 = 1200000,
+ .buck2_voltage2 = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 3060f78e12ab..901657fa7a12 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s5pv310/include/mach/map.h
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Memory map definitions
@@ -23,90 +23,43 @@
#include <plat/map-s5p.h>
-#define S5PV310_PA_SYSRAM (0x02025000)
+#define S5PV310_PA_SYSRAM 0x02025000
+
+#define S5PV310_PA_I2S0 0x03830000
+#define S5PV310_PA_I2S1 0xE3100000
+#define S5PV310_PA_I2S2 0xE2A00000
+
+#define S5PV310_PA_PCM0 0x03840000
+#define S5PV310_PA_PCM1 0x13980000
+#define S5PV310_PA_PCM2 0x13990000
#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
-#define S5PC210_PA_ONENAND (0x0C000000)
-#define S5P_PA_ONENAND S5PC210_PA_ONENAND
+#define S5PC210_PA_ONENAND 0x0C000000
+#define S5PC210_PA_ONENAND_DMA 0x0C600000
-#define S5PC210_PA_ONENAND_DMA (0x0C600000)
-#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA
+#define S5PV310_PA_CHIPID 0x10000000
-#define S5PV310_PA_CHIPID (0x10000000)
-#define S5P_PA_CHIPID S5PV310_PA_CHIPID
+#define S5PV310_PA_SYSCON 0x10010000
+#define S5PV310_PA_PMU 0x10020000
+#define S5PV310_PA_CMU 0x10030000
-#define S5PV310_PA_SYSCON (0x10010000)
-#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+#define S5PV310_PA_WATCHDOG 0x10060000
+#define S5PV310_PA_RTC 0x10070000
-#define S5PV310_PA_PMU (0x10020000)
+#define S5PV310_PA_DMC0 0x10400000
-#define S5PV310_PA_CMU (0x10030000)
+#define S5PV310_PA_COMBINER 0x10448000
-#define S5PV310_PA_WATCHDOG (0x10060000)
-#define S5PV310_PA_RTC (0x10070000)
+#define S5PV310_PA_COREPERI 0x10500000
+#define S5PV310_PA_GIC_CPU 0x10500100
+#define S5PV310_PA_TWD 0x10500600
+#define S5PV310_PA_GIC_DIST 0x10501000
+#define S5PV310_PA_L2CC 0x10502000
-#define S5PV310_PA_DMC0 (0x10400000)
-
-#define S5PV310_PA_COMBINER (0x10448000)
-
-#define S5PV310_PA_COREPERI (0x10500000)
-#define S5PV310_PA_GIC_CPU (0x10500100)
-#define S5PV310_PA_TWD (0x10500600)
-#define S5PV310_PA_GIC_DIST (0x10501000)
-#define S5PV310_PA_L2CC (0x10502000)
-
-/* DMA */
-#define S5PV310_PA_MDMA 0x10810000
-#define S5PV310_PA_PDMA0 0x12680000
-#define S5PV310_PA_PDMA1 0x12690000
-
-#define S5PV310_PA_GPIO1 (0x11400000)
-#define S5PV310_PA_GPIO2 (0x11000000)
-#define S5PV310_PA_GPIO3 (0x03860000)
-
-#define S5PV310_PA_MIPI_CSIS0 0x11880000
-#define S5PV310_PA_MIPI_CSIS1 0x11890000
-
-#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
-
-#define S5PV310_PA_SROMC (0x12570000)
-#define S5P_PA_SROMC S5PV310_PA_SROMC
-
-/* S/PDIF */
-#define S5PV310_PA_SPDIF 0xE1100000
-
-/* I2S */
-#define S5PV310_PA_I2S0 0x03830000
-#define S5PV310_PA_I2S1 0xE3100000
-#define S5PV310_PA_I2S2 0xE2A00000
-
-/* PCM */
-#define S5PV310_PA_PCM0 0x03840000
-#define S5PV310_PA_PCM1 0x13980000
-#define S5PV310_PA_PCM2 0x13990000
-
-/* AC97 */
-#define S5PV310_PA_AC97 0x139A0000
-
-#define S5PV310_PA_UART (0x13800000)
-
-#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
-
-#define S5P_SZ_UART SZ_256
-
-#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
-
-#define S5PV310_PA_TIMER (0x139D0000)
-#define S5P_PA_TIMER S5PV310_PA_TIMER
-
-#define S5PV310_PA_SDRAM (0x40000000)
-#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+#define S5PV310_PA_MDMA 0x10810000
+#define S5PV310_PA_PDMA0 0x12680000
+#define S5PV310_PA_PDMA1 0x12690000
#define S5PV310_PA_SYSMMU_MDMA 0x10A40000
#define S5PV310_PA_SYSMMU_SSS 0x10A50000
@@ -125,8 +78,31 @@
#define S5PV310_PA_SYSMMU_MFC_L 0x13620000
#define S5PV310_PA_SYSMMU_MFC_R 0x13630000
-/* compatibiltiy defines. */
-#define S3C_PA_UART S5PV310_PA_UART
+#define S5PV310_PA_GPIO1 0x11400000
+#define S5PV310_PA_GPIO2 0x11000000
+#define S5PV310_PA_GPIO3 0x03860000
+
+#define S5PV310_PA_MIPI_CSIS0 0x11880000
+#define S5PV310_PA_MIPI_CSIS1 0x11890000
+
+#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+
+#define S5PV310_PA_SROMC 0x12570000
+
+#define S5PV310_PA_UART 0x13800000
+
+#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+
+#define S5PV310_PA_AC97 0x139A0000
+
+#define S5PV310_PA_TIMER 0x139D0000
+
+#define S5PV310_PA_SDRAM 0x40000000
+
+#define S5PV310_PA_SPDIF 0xE1100000
+
+/* Compatibiltiy Defines */
+
#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2)
@@ -141,7 +117,28 @@
#define S3C_PA_IIC7 S5PV310_PA_IIC(7)
#define S3C_PA_RTC S5PV310_PA_RTC
#define S3C_PA_WDT S5PV310_PA_WATCHDOG
+
+#define S5P_PA_CHIPID S5PV310_PA_CHIPID
#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1
+#define S5P_PA_ONENAND S5PC210_PA_ONENAND
+#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA
+#define S5P_PA_SDRAM S5PV310_PA_SDRAM
+#define S5P_PA_SROMC S5PV310_PA_SROMC
+#define S5P_PA_SYSCON S5PV310_PA_SYSCON
+#define S5P_PA_TIMER S5PV310_PA_TIMER
+
+/* UART */
+
+#define S3C_PA_UART S5PV310_PA_UART
+
+#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0 S5P_PA_UART(0)
+#define S5P_PA_UART1 S5P_PA_UART(1)
+#define S5P_PA_UART2 S5P_PA_UART(2)
+#define S5P_PA_UART3 S5P_PA_UART(3)
+#define S5P_PA_UART4 S5P_PA_UART(4)
+
+#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 6a7342886171..afaf87fdb93e 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -28,7 +28,7 @@
static struct resource s5p_uart0_resource[] = {
[0] = {
.start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART,
+ .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = {
static struct resource s5p_uart1_resource[] = {
[0] = {
.start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART,
+ .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = {
static struct resource s5p_uart2_resource[] = {
[0] = {
.start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART,
+ .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[0] = {
.start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART,
+ .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
[0] = {
.start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART,
+ .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
[0] = {
.start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART,
+ .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 236ef8427d7d..3e4bd8147bf4 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -58,4 +58,3 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
s3c_device_ts.dev.platform_data = npd;
}
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index 0851eb1e919e..2751b3a8a66f 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -133,11 +133,12 @@ unsigned long decompress_kernel(void)
unsigned long output_addr;
unsigned char *output;
- check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+ output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
+ check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
memset(&_bss, 0, &_ebss - &_bss);
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+ output = (unsigned char *) output_addr;
#ifdef CONFIG_BLK_DEV_INITRD
/*
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 76daea117181..5c5ba10384c2 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -36,14 +36,19 @@
static inline int atomic_read(const atomic_t *v)
{
- barrier();
- return v->counter;
+ int c;
+
+ asm volatile(
+ " l %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic_set(atomic_t *v, int i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " st %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline int atomic_add_return(int i, atomic_t *v)
@@ -128,14 +133,19 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
static inline long long atomic64_read(const atomic64_t *v)
{
- barrier();
- return v->counter;
+ long long c;
+
+ asm volatile(
+ " lg %0,%1\n"
+ : "=d" (c) : "Q" (v->counter));
+ return c;
}
static inline void atomic64_set(atomic64_t *v, long long i)
{
- v->counter = i;
- barrier();
+ asm volatile(
+ " stg %1,%0\n"
+ : "=Q" (v->counter) : "d" (i));
}
static inline long long atomic64_add_return(long long i, atomic64_t *v)
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 24aafa68b643..2a30d5ac0667 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -13,6 +13,7 @@
#define L1_CACHE_BYTES 256
#define L1_CACHE_SHIFT 8
+#define NET_SKB_PAD 32
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index faf5a2c65926..36e0fa161c2b 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -577,11 +577,9 @@ void tpm_get_timeouts(struct tpm_chip *chip)
if (rc)
return;
- if (be32_to_cpu(tpm_cmd.header.out.return_code) != 0 ||
- be32_to_cpu(tpm_cmd.header.out.length)
- != sizeof(tpm_cmd.header.out) + sizeof(u32) + 3 * sizeof(u32))
+ if (be32_to_cpu(tpm_cmd.header.out.return_code)
+ != 3 * sizeof(u32))
return;
-
duration_cap = &tpm_cmd.params.getcap_out.cap.duration;
chip->vendor.duration[TPM_SHORT] =
usecs_to_jiffies(be32_to_cpu(duration_cap->tpm_short));
@@ -941,18 +939,6 @@ ssize_t tpm_show_caps_1_2(struct device * dev,
}
EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
-ssize_t tpm_show_timeouts(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d %d %d\n",
- jiffies_to_usecs(chip->vendor.duration[TPM_SHORT]),
- jiffies_to_usecs(chip->vendor.duration[TPM_MEDIUM]),
- jiffies_to_usecs(chip->vendor.duration[TPM_LONG]));
-}
-EXPORT_SYMBOL_GPL(tpm_show_timeouts);
-
ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index d84ff772c26f..72ddb031b69a 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -56,8 +56,6 @@ extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
char *);
extern ssize_t tpm_show_temp_deactivated(struct device *,
struct device_attribute *attr, char *);
-extern ssize_t tpm_show_timeouts(struct device *,
- struct device_attribute *attr, char *);
struct tpm_chip;
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0d1d38e5f266..dd21df55689d 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -376,7 +376,6 @@ static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
NULL);
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
-static DEVICE_ATTR(timeouts, S_IRUGO, tpm_show_timeouts, NULL);
static struct attribute *tis_attrs[] = {
&dev_attr_pubek.attr,
@@ -386,8 +385,7 @@ static struct attribute *tis_attrs[] = {
&dev_attr_owned.attr,
&dev_attr_temp_deactivated.attr,
&dev_attr_caps.attr,
- &dev_attr_cancel.attr,
- &dev_attr_timeouts.attr, NULL,
+ &dev_attr_cancel.attr, NULL,
};
static struct attribute_group tis_attr_grp = {
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 15d94c63918c..729d4233b763 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1553,17 +1553,7 @@
/* Backlight control */
#define BLC_PWM_CTL 0x61254
-#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
#define BLC_PWM_CTL2 0x61250 /* 965+ only */
-#define BLM_COMBINATION_MODE (1 << 30)
-/*
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
-#define BLM_LEGACY_MODE (1 << 16)
/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index c65992df458d..d860abeda70f 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -30,8 +30,6 @@
#include "intel_drv.h"
-#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
-
void
intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode)
@@ -112,19 +110,6 @@ intel_pch_panel_fitting(struct drm_device *dev,
dev_priv->pch_pf_size = (width << 16) | height;
}
-static int is_backlight_combination_mode(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (INTEL_INFO(dev)->gen >= 4)
- return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
-
- if (IS_GEN2(dev))
- return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
-
- return 0;
-}
-
static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
{
u32 val;
@@ -181,9 +166,6 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
if (INTEL_INFO(dev)->gen < 4)
max &= ~1;
}
-
- if (is_backlight_combination_mode(dev))
- max *= 0xff;
}
DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
@@ -201,15 +183,6 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (IS_PINEVIEW(dev))
val >>= 1;
-
- if (is_backlight_combination_mode(dev)){
- u8 lbpc;
-
- val &= ~1;
- pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
- val *= lbpc;
- val >>= 1;
- }
}
DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
@@ -232,16 +205,6 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level)
if (HAS_PCH_SPLIT(dev))
return intel_pch_panel_set_backlight(dev, level);
-
- if (is_backlight_combination_mode(dev)){
- u32 max = intel_panel_get_max_backlight(dev);
- u8 lpbc;
-
- lpbc = level * 0xfe / max + 1;
- level /= lpbc;
- pci_write_config_byte(dev->pdev, PCI_LBPC, lpbc);
- }
-
tmp = I915_READ(BLC_PWM_CTL);
if (IS_PINEVIEW(dev)) {
tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f1646..297bc9a7d6e6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
will be called k8temp.
config SENSORS_K10TEMP
- tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ tristate "AMD Family 10h/11h/12h/14h temperature sensor"
depends on X86 && PCI
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
- the AMD Family 10h and all revisions of the AMD Family 11h
- microarchitectures.
+ the AMD Family 10h and all revisions of the AMD Family 11h,
+ 12h (Llano), and 14h (Brazos) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
called jz4740-hwmon.
config SENSORS_JC42
- tristate "JEDEC JC42.4 compliant temperature sensors"
+ tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on I2C
help
- If you say yes here you get support for Jedec JC42.4 compliant
- temperature sensors. Support will include, but not be limited to,
- ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
- MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+ If you say yes here, you get support for JEDEC JC42.4 compliant
+ temperature sensors, which are used on many DDR3 memory modules for
+ mobile devices and servers. Support will include, but not be limited
+ to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+ MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
This driver can also be built as a module. If so, the module
will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
- EMC6D101 and EMC6D102.
+ EMC6D101, EMC6D102, and EMC6D103.
This driver can also be built as a module. If so, the module
will be called lm85.
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78c8dde..934991237061 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
/* Configuration register defines */
#define JC42_CFG_CRIT_ONLY (1 << 2)
+#define JC42_CFG_TCRIT_LOCK (1 << 6)
+#define JC42_CFG_EVENT_LOCK (1 << 7)
#define JC42_CFG_SHUTDOWN (1 << 8)
#define JC42_CFG_HYST_SHIFT 9
#define JC42_CFG_HYST_MASK 0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct jc42_data *data = i2c_get_clientdata(client);
- long val;
+ unsigned long val;
int diff, hyst;
int err;
int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
static DEVICE_ATTR(temp1_input, S_IRUGO,
show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
show_temp_max, set_temp_max);
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
show_temp_crit_hyst, set_temp_crit_hyst);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
NULL
};
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct jc42_data *data = i2c_get_clientdata(client);
+ unsigned int config = data->config;
+ bool readonly;
+
+ if (attr == &dev_attr_temp1_crit.attr)
+ readonly = config & JC42_CFG_TCRIT_LOCK;
+ else if (attr == &dev_attr_temp1_min.attr ||
+ attr == &dev_attr_temp1_max.attr)
+ readonly = config & JC42_CFG_EVENT_LOCK;
+ else if (attr == &dev_attr_temp1_crit_hyst.attr)
+ readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+ else
+ readonly = true;
+
+ return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
static const struct attribute_group jc42_group = {
.attrs = jc42_attributes,
+ .is_visible = jc42_attribute_mode,
};
/* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a2404cd3e..82bf65aa2968 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
/*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*
@@ -25,7 +25,7 @@
#include <linux/pci.h>
#include <asm/processor.h>
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL");
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37a..d2cc28660816 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
enum chips {
any_chip, lm85b, lm85c,
adm1027, adt7463, adt7468,
- emc6d100, emc6d102
+ emc6d100, emc6d102, emc6d103
};
/* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
#define LM85_VERSTEP_EMC6D100_A0 0x60
#define LM85_VERSTEP_EMC6D100_A1 0x61
#define LM85_VERSTEP_EMC6D102 0x65
+#define LM85_VERSTEP_EMC6D103_A0 0x68
+#define LM85_VERSTEP_EMC6D103_A1 0x69
+#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */
#define LM85_REG_CONFIG 0x40
@@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = {
{ "emc6d100", emc6d100 },
{ "emc6d101", emc6d100 },
{ "emc6d102", emc6d102 },
+ { "emc6d103", emc6d103 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
case LM85_VERSTEP_EMC6D102:
type_name = "emc6d102";
break;
+ case LM85_VERSTEP_EMC6D103_A0:
+ case LM85_VERSTEP_EMC6D103_A1:
+ type_name = "emc6d103";
+ break;
+ /*
+ * Registers apparently missing in EMC6D103S/EMC6D103:A2
+ * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+ * (according to the data sheets), but used unconditionally
+ * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+ * So skip EMC6D103S for now.
+ case LM85_VERSTEP_EMC6D103S:
+ type_name = "emc6d103s";
+ break;
+ */
}
} else {
dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client,
case adt7468:
case emc6d100:
case emc6d102:
+ case emc6d103:
data->freq_map = adm1027_freq_map;
break;
default:
@@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
/* More alarm bits */
data->alarms |= lm85_read_value(client,
EMC6D100_REG_ALARM3) << 16;
- } else if (data->type == emc6d102) {
+ } else if (data->type == emc6d102 || data->type == emc6d103) {
/* Have to read LSB bits after the MSB ones because
the reading of the MSB bits has frozen the
LSBs (backward from the ADM1027).
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
index c3f72192af66..a52039564e74 100644
--- a/drivers/pcmcia/pxa2xx_colibri.c
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -181,6 +181,9 @@ static int __init colibri_pcmcia_init(void)
{
int ret;
+ if (!machine_is_colibri() && !machine_is_colibri320())
+ return -ENODEV;
+
colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!colibri_pcmcia_device)
return -ENOMEM;
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d163bc2e2b9e..a59af5b24f0a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -227,7 +227,7 @@ config SONYPI_COMPAT
config IDEAPAD_LAPTOP
tristate "Lenovo IdeaPad Laptop Extras"
depends on ACPI
- depends on RFKILL
+ depends on RFKILL && INPUT
select INPUT_SPARSEKMAP
help
This is a driver for the rfkill switches on Lenovo IdeaPad netbooks.
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index c5c4b8c32eb8..38b34a73866a 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -84,7 +84,7 @@ MODULE_LICENSE("GPL");
*/
#define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB"
#define AMW0_GUID2 "431F16ED-0C2B-444C-B267-27DEB140CF9C"
-#define WMID_GUID1 "6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3"
+#define WMID_GUID1 "6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3"
#define WMID_GUID2 "95764E09-FB56-4e83-B31A-37761F60994A"
#define WMID_GUID3 "61EF69EA-865C-4BC3-A502-A0DEBA0CB531"
@@ -1280,7 +1280,7 @@ static ssize_t set_bool_threeg(struct device *dev,
return -EINVAL;
return count;
}
-static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+static DEVICE_ATTR(threeg, S_IRUGO | S_IWUSR, show_bool_threeg,
set_bool_threeg);
static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 4633fd8532cc..fe495939c307 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1081,14 +1081,8 @@ static int asus_hotk_add_fs(struct acpi_device *device)
struct proc_dir_entry *proc;
mode_t mode;
- /*
- * If parameter uid or gid is not changed, keep the default setting for
- * our proc entries (-rw-rw-rw-) else, it means we care about security,
- * and then set to -rw-rw----
- */
-
if ((asus_uid == 0) && (asus_gid == 0)) {
- mode = S_IFREG | S_IRUGO | S_IWUGO;
+ mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
printk(KERN_WARNING " asus_uid and asus_gid parameters are "
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 34657f96b5a5..ad24ef36f9f7 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -290,9 +290,12 @@ static int dell_rfkill_set(void *data, bool blocked)
dell_send_request(buffer, 17, 11);
/* If the hardware switch controls this radio, and the hardware
- switch is disabled, don't allow changing the software state */
+ switch is disabled, don't allow changing the software state.
+ If the hardware switch is reported as not supported, always
+ fire the SMI to toggle the killswitch. */
if ((hwswitch_state & BIT(hwswitch_bit)) &&
- !(buffer->output[1] & BIT(16))) {
+ !(buffer->output[1] & BIT(16)) &&
+ (buffer->output[1] & BIT(0))) {
ret = -EINVAL;
goto out;
}
@@ -398,6 +401,23 @@ static const struct file_operations dell_debugfs_fops = {
static void dell_update_rfkill(struct work_struct *ignored)
{
+ int status;
+
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+ release_buffer();
+
+ /* if hardware rfkill is not supported, set it explicitly */
+ if (!(status & BIT(0))) {
+ if (wifi_rfkill)
+ dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
+ if (bluetooth_rfkill)
+ dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
+ if (wwan_rfkill)
+ dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
+ }
+
if (wifi_rfkill)
dell_rfkill_query(wifi_rfkill, (void *)1);
if (bluetooth_rfkill)
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
index 930e62762365..61433d492862 100644
--- a/drivers/platform/x86/intel_pmic_gpio.c
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -60,69 +60,20 @@ enum pmic_gpio_register {
#define GPOSW_DOU 0x08
#define GPOSW_RDRV 0x30
+#define GPIO_UPDATE_TYPE 0x80000000
#define NUM_GPIO 24
-struct pmic_gpio_irq {
- spinlock_t lock;
- u32 trigger[NUM_GPIO];
- u32 dirty;
- struct work_struct work;
-};
-
-
struct pmic_gpio {
+ struct mutex buslock;
struct gpio_chip chip;
- struct pmic_gpio_irq irqtypes;
void *gpiointr;
int irq;
unsigned irq_base;
+ unsigned int update_type;
+ u32 trigger_type;
};
-static void pmic_program_irqtype(int gpio, int type)
-{
- if (type & IRQ_TYPE_EDGE_RISING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static void pmic_irqtype_work(struct work_struct *work)
-{
- struct pmic_gpio_irq *t =
- container_of(work, struct pmic_gpio_irq, work);
- unsigned long flags;
- int i;
- u16 type;
-
- spin_lock_irqsave(&t->lock, flags);
- /* As we drop the lock, we may need multiple scans if we race the
- pmic_irq_type function */
- while (t->dirty) {
- /*
- * For each pin that has the dirty bit set send an IPC
- * message to configure the hardware via the PMIC
- */
- for (i = 0; i < NUM_GPIO; i++) {
- if (!(t->dirty & (1 << i)))
- continue;
- t->dirty &= ~(1 << i);
- /* We can't trust the array entry or dirty
- once the lock is dropped */
- type = t->trigger[i];
- spin_unlock_irqrestore(&t->lock, flags);
- pmic_program_irqtype(i, type);
- spin_lock_irqsave(&t->lock, flags);
- }
- }
- spin_unlock_irqrestore(&t->lock, flags);
-}
-
static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
if (offset > 8) {
@@ -190,25 +141,24 @@ static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
1 << (offset - 16));
}
-static int pmic_irq_type(unsigned irq, unsigned type)
+/*
+ * This is called from genirq with pg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int pmic_irq_type(struct irq_data *data, unsigned type)
{
- struct pmic_gpio *pg = get_irq_chip_data(irq);
- u32 gpio = irq - pg->irq_base;
- unsigned long flags;
+ struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
+ u32 gpio = data->irq - pg->irq_base;
if (gpio >= pg->chip.ngpio)
return -EINVAL;
- spin_lock_irqsave(&pg->irqtypes.lock, flags);
- pg->irqtypes.trigger[gpio] = type;
- pg->irqtypes.dirty |= (1 << gpio);
- spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
- schedule_work(&pg->irqtypes.work);
+ pg->trigger_type = type;
+ pg->update_type = gpio | GPIO_UPDATE_TYPE;
return 0;
}
-
-
static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
@@ -217,38 +167,32 @@ static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
}
/* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(unsigned irq)
-{
-};
+static void pmic_irq_unmask(struct irq_data *data) { }
-static void pmic_irq_mask(unsigned irq)
-{
-};
+static void pmic_irq_mask(struct irq_data *data) { }
static struct irq_chip pmic_irqchip = {
.name = "PMIC-GPIO",
- .mask = pmic_irq_mask,
- .unmask = pmic_irq_unmask,
- .set_type = pmic_irq_type,
+ .irq_mask = pmic_irq_mask,
+ .irq_unmask = pmic_irq_unmask,
+ .irq_set_type = pmic_irq_type,
};
-static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+static irqreturn_t pmic_irq_handler(int irq, void *data)
{
- struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+ struct pmic_gpio *pg = data;
u8 intsts = *((u8 *)pg->gpiointr + 4);
int gpio;
+ irqreturn_t ret = IRQ_NONE;
for (gpio = 0; gpio < 8; gpio++) {
if (intsts & (1 << gpio)) {
pr_debug("pmic pin %d triggered\n", gpio);
generic_handle_irq(pg->irq_base + gpio);
+ ret = IRQ_HANDLED;
}
}
-
- if (desc->chip->irq_eoi)
- desc->chip->irq_eoi(irq_get_irq_data(irq));
- else
- dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq);
+ return ret;
}
static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
@@ -297,8 +241,7 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
pg->chip.can_sleep = 1;
pg->chip.dev = dev;
- INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
- spin_lock_init(&pg->irqtypes.lock);
+ mutex_init(&pg->buslock);
pg->chip.dev = dev;
retval = gpiochip_add(&pg->chip);
@@ -306,8 +249,13 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
goto err;
}
- set_irq_data(pg->irq, pg);
- set_irq_chained_handler(pg->irq, pmic_irq_handler);
+
+ retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
+ if (retval) {
+ printk(KERN_WARNING "pmic: Interrupt request failed\n");
+ goto err;
+ }
+
for (i = 0; i < 8; i++) {
set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
handle_simple_irq, "demux");
diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c
index 1fe0f1feff71..865ef78d6f1a 100644
--- a/drivers/platform/x86/tc1100-wmi.c
+++ b/drivers/platform/x86/tc1100-wmi.c
@@ -162,7 +162,7 @@ set_bool_##value(struct device *dev, struct device_attribute *attr, \
return -EINVAL; \
return count; \
} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, \
show_bool_##value, set_bool_##value);
show_set_bool(wireless, TC1100_INSTANCE_WIRELESS);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index dd599585c6a9..eb9922385ef8 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2275,16 +2275,12 @@ static void tpacpi_input_send_key(const unsigned int scancode)
if (keycode != KEY_RESERVED) {
mutex_lock(&tpacpi_inputdev_send_mutex);
+ input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
input_report_key(tpacpi_inputdev, keycode, 1);
- if (keycode == KEY_UNKNOWN)
- input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
- scancode);
input_sync(tpacpi_inputdev);
+ input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN, scancode);
input_report_key(tpacpi_inputdev, keycode, 0);
- if (keycode == KEY_UNKNOWN)
- input_event(tpacpi_inputdev, EV_MSC, MSC_SCAN,
- scancode);
input_sync(tpacpi_inputdev);
mutex_unlock(&tpacpi_inputdev_send_mutex);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 318672d05563..a9fe23d5bd0f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -72,7 +72,7 @@ static struct dasd_discipline dasd_eckd_discipline;
static struct ccw_device_id dasd_eckd_ids[] = {
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
- { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+ { CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 0bc68de8edd7..f0aef787a102 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -60,6 +60,7 @@ int ceph_init_dentry(struct dentry *dentry)
}
di->dentry = dentry;
di->lease_session = NULL;
+ di->parent_inode = igrab(dentry->d_parent->d_inode);
dentry->d_fsdata = di;
dentry->d_time = jiffies;
ceph_dentry_lru_add(dentry);
@@ -1033,7 +1034,7 @@ static void ceph_dentry_release(struct dentry *dentry)
u64 snapid = CEPH_NOSNAP;
if (!IS_ROOT(dentry)) {
- parent_inode = dentry->d_parent->d_inode;
+ parent_inode = di->parent_inode;
if (parent_inode)
snapid = ceph_snap(parent_inode);
}
@@ -1058,6 +1059,8 @@ static void ceph_dentry_release(struct dentry *dentry)
kmem_cache_free(ceph_dentry_cachep, di);
dentry->d_fsdata = NULL;
}
+ if (parent_inode)
+ iput(parent_inode);
}
static int ceph_snapdir_d_revalidate(struct dentry *dentry,
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 39c243acd062..f40b9139e437 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -584,10 +584,14 @@ static void queue_realm_cap_snaps(struct ceph_snap_realm *realm)
if (lastinode)
iput(lastinode);
- dout("queue_realm_cap_snaps %p %llx children\n", realm, realm->ino);
- list_for_each_entry(child, &realm->children, child_item)
- queue_realm_cap_snaps(child);
+ list_for_each_entry(child, &realm->children, child_item) {
+ dout("queue_realm_cap_snaps %p %llx queue child %p %llx\n",
+ realm, realm->ino, child, child->ino);
+ list_del_init(&child->dirty_item);
+ list_add(&child->dirty_item, &realm->dirty_item);
+ }
+ list_del_init(&realm->dirty_item);
dout("queue_realm_cap_snaps %p %llx done\n", realm, realm->ino);
}
@@ -683,7 +687,9 @@ int ceph_update_snap_trace(struct ceph_mds_client *mdsc,
* queue cap snaps _after_ we've built the new snap contexts,
* so that i_head_snapc can be set appropriately.
*/
- list_for_each_entry(realm, &dirty_realms, dirty_item) {
+ while (!list_empty(&dirty_realms)) {
+ realm = list_first_entry(&dirty_realms, struct ceph_snap_realm,
+ dirty_item);
queue_realm_cap_snaps(realm);
}
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 20b907d76ae2..88fcaa21b801 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -207,6 +207,7 @@ struct ceph_dentry_info {
struct dentry *dentry;
u64 time;
u64 offset;
+ struct inode *parent_inode;
};
struct ceph_inode_xattrs_info {
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 4a3330235d55..a9371b6578c0 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -127,5 +127,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.70"
+#define CIFS_VERSION "1.71"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8d9189f64477..79f641eeda30 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -170,7 +170,7 @@ cifs_convert_address(struct sockaddr *dst, const char *src, int len)
{
int rc, alen, slen;
const char *pct;
- char *endp, scope_id[13];
+ char scope_id[13];
struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
@@ -197,9 +197,9 @@ cifs_convert_address(struct sockaddr *dst, const char *src, int len)
memcpy(scope_id, pct + 1, slen);
scope_id[slen] = '\0';
- s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
- if (endp != scope_id + slen)
- return 0;
+ rc = strict_strtoul(scope_id, 0,
+ (unsigned long *)&s6->sin6_scope_id);
+ rc = (rc == 0) ? 1 : 0;
}
return rc;
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 1adc9625a344..16765703131b 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -656,13 +656,13 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
if (type == LANMAN) {
#ifdef CONFIG_CIFS_WEAK_PW_HASH
- char lnm_session_key[CIFS_SESS_KEY_SIZE];
+ char lnm_session_key[CIFS_AUTH_RESP_SIZE];
pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
/* no capabilities flags in old lanman negotiation */
- pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+ pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_AUTH_RESP_SIZE);
/* Calculate hash with password and copy into bcc_ptr.
* Encryption Key (stored as in cryptkey) gets used if the
@@ -675,8 +675,8 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
true : false, lnm_session_key);
ses->flags |= CIFS_SES_LANMAN;
- memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
+ memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_AUTH_RESP_SIZE);
+ bcc_ptr += CIFS_AUTH_RESP_SIZE;
/* can not sign if LANMAN negotiated so no need
to calculate signing key? but what if server
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 6fc4f319b550..534c1d46e69e 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -46,24 +46,28 @@ static int ecryptfs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
{
struct dentry *lower_dentry;
struct vfsmount *lower_mnt;
- struct dentry *dentry_save;
- struct vfsmount *vfsmount_save;
+ struct dentry *dentry_save = NULL;
+ struct vfsmount *vfsmount_save = NULL;
int rc = 1;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
lower_dentry = ecryptfs_dentry_to_lower(dentry);
lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
goto out;
- dentry_save = nd->path.dentry;
- vfsmount_save = nd->path.mnt;
- nd->path.dentry = lower_dentry;
- nd->path.mnt = lower_mnt;
+ if (nd) {
+ dentry_save = nd->path.dentry;
+ vfsmount_save = nd->path.mnt;
+ nd->path.dentry = lower_dentry;
+ nd->path.mnt = lower_mnt;
+ }
rc = lower_dentry->d_op->d_revalidate(lower_dentry, nd);
- nd->path.dentry = dentry_save;
- nd->path.mnt = vfsmount_save;
+ if (nd) {
+ nd->path.dentry = dentry_save;
+ nd->path.mnt = vfsmount_save;
+ }
if (dentry->d_inode) {
struct inode *lower_inode =
ecryptfs_inode_to_lower(dentry->d_inode);
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index dbc84ed96336..e00753496e3e 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -632,8 +632,7 @@ int ecryptfs_interpose(struct dentry *hidden_dentry,
u32 flags);
int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
struct dentry *lower_dentry,
- struct inode *ecryptfs_dir_inode,
- struct nameidata *ecryptfs_nd);
+ struct inode *ecryptfs_dir_inode);
int ecryptfs_decode_and_decrypt_filename(char **decrypted_name,
size_t *decrypted_name_size,
struct dentry *ecryptfs_dentry,
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 81e10e6a9443..7d1050e254f9 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -317,6 +317,7 @@ ecryptfs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
const struct file_operations ecryptfs_dir_fops = {
.readdir = ecryptfs_readdir,
+ .read = generic_read_dir,
.unlocked_ioctl = ecryptfs_unlocked_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ecryptfs_compat_ioctl,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index bd33f87a1907..b592938a84bc 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -74,16 +74,20 @@ ecryptfs_create_underlying_file(struct inode *lower_dir_inode,
unsigned int flags_save;
int rc;
- dentry_save = nd->path.dentry;
- vfsmount_save = nd->path.mnt;
- flags_save = nd->flags;
- nd->path.dentry = lower_dentry;
- nd->path.mnt = lower_mnt;
- nd->flags &= ~LOOKUP_OPEN;
+ if (nd) {
+ dentry_save = nd->path.dentry;
+ vfsmount_save = nd->path.mnt;
+ flags_save = nd->flags;
+ nd->path.dentry = lower_dentry;
+ nd->path.mnt = lower_mnt;
+ nd->flags &= ~LOOKUP_OPEN;
+ }
rc = vfs_create(lower_dir_inode, lower_dentry, mode, nd);
- nd->path.dentry = dentry_save;
- nd->path.mnt = vfsmount_save;
- nd->flags = flags_save;
+ if (nd) {
+ nd->path.dentry = dentry_save;
+ nd->path.mnt = vfsmount_save;
+ nd->flags = flags_save;
+ }
return rc;
}
@@ -241,8 +245,7 @@ ecryptfs_create(struct inode *directory_inode, struct dentry *ecryptfs_dentry,
*/
int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
struct dentry *lower_dentry,
- struct inode *ecryptfs_dir_inode,
- struct nameidata *ecryptfs_nd)
+ struct inode *ecryptfs_dir_inode)
{
struct dentry *lower_dir_dentry;
struct vfsmount *lower_mnt;
@@ -290,8 +293,6 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
goto out;
if (special_file(lower_inode->i_mode))
goto out;
- if (!ecryptfs_nd)
- goto out;
/* Released in this function */
page_virt = kmem_cache_zalloc(ecryptfs_header_cache_2, GFP_USER);
if (!page_virt) {
@@ -348,75 +349,6 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
return rc;
}
-/**
- * ecryptfs_new_lower_dentry
- * @name: The name of the new dentry.
- * @lower_dir_dentry: Parent directory of the new dentry.
- * @nd: nameidata from last lookup.
- *
- * Create a new dentry or get it from lower parent dir.
- */
-static struct dentry *
-ecryptfs_new_lower_dentry(struct qstr *name, struct dentry *lower_dir_dentry,
- struct nameidata *nd)
-{
- struct dentry *new_dentry;
- struct dentry *tmp;
- struct inode *lower_dir_inode;
-
- lower_dir_inode = lower_dir_dentry->d_inode;
-
- tmp = d_alloc(lower_dir_dentry, name);
- if (!tmp)
- return ERR_PTR(-ENOMEM);
-
- mutex_lock(&lower_dir_inode->i_mutex);
- new_dentry = lower_dir_inode->i_op->lookup(lower_dir_inode, tmp, nd);
- mutex_unlock(&lower_dir_inode->i_mutex);
-
- if (!new_dentry)
- new_dentry = tmp;
- else
- dput(tmp);
-
- return new_dentry;
-}
-
-
-/**
- * ecryptfs_lookup_one_lower
- * @ecryptfs_dentry: The eCryptfs dentry that we are looking up
- * @lower_dir_dentry: lower parent directory
- * @name: lower file name
- *
- * Get the lower dentry from vfs. If lower dentry does not exist yet,
- * create it.
- */
-static struct dentry *
-ecryptfs_lookup_one_lower(struct dentry *ecryptfs_dentry,
- struct dentry *lower_dir_dentry, struct qstr *name)
-{
- struct nameidata nd;
- struct vfsmount *lower_mnt;
- int err;
-
- lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(
- ecryptfs_dentry->d_parent));
- err = vfs_path_lookup(lower_dir_dentry, lower_mnt, name->name , 0, &nd);
- mntput(lower_mnt);
-
- if (!err) {
- /* we dont need the mount */
- mntput(nd.path.mnt);
- return nd.path.dentry;
- }
- if (err != -ENOENT)
- return ERR_PTR(err);
-
- /* create a new lower dentry */
- return ecryptfs_new_lower_dentry(name, lower_dir_dentry, &nd);
-}
-
/**
* ecryptfs_lookup
* @ecryptfs_dir_inode: The eCryptfs directory inode
@@ -434,7 +366,6 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
size_t encrypted_and_encoded_name_size;
struct ecryptfs_mount_crypt_stat *mount_crypt_stat = NULL;
struct dentry *lower_dir_dentry, *lower_dentry;
- struct qstr lower_name;
int rc = 0;
if ((ecryptfs_dentry->d_name.len == 1
@@ -444,20 +375,14 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
- lower_name.name = ecryptfs_dentry->d_name.name;
- lower_name.len = ecryptfs_dentry->d_name.len;
- lower_name.hash = ecryptfs_dentry->d_name.hash;
- if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
- rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
- lower_dir_dentry->d_inode, &lower_name);
- if (rc < 0)
- goto out_d_drop;
- }
- lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
- lower_dir_dentry, &lower_name);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+ lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
+ lower_dir_dentry,
+ ecryptfs_dentry->d_name.len);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
@@ -479,28 +404,21 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
- lower_name.name = encrypted_and_encoded_name;
- lower_name.len = encrypted_and_encoded_name_size;
- lower_name.hash = full_name_hash(lower_name.name, lower_name.len);
- if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
- rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
- lower_dir_dentry->d_inode, &lower_name);
- if (rc < 0)
- goto out_d_drop;
- }
- lower_dentry = ecryptfs_lookup_one_lower(ecryptfs_dentry,
- lower_dir_dentry, &lower_name);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
+ lower_dentry = lookup_one_len(encrypted_and_encoded_name,
+ lower_dir_dentry,
+ encrypted_and_encoded_name_size);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_lower() returned "
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
"[%d] on lower_dentry = [%s]\n", __func__, rc,
encrypted_and_encoded_name);
goto out_d_drop;
}
lookup_and_interpose:
rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry,
- ecryptfs_dir_inode,
- ecryptfs_nd);
+ ecryptfs_dir_inode);
goto out;
out_d_drop:
d_drop(ecryptfs_dentry);
@@ -1092,6 +1010,8 @@ int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
ecryptfs_dentry_to_lower(dentry), &lower_stat);
if (!rc) {
+ fsstack_copy_attr_all(dentry->d_inode,
+ ecryptfs_inode_to_lower(dentry->d_inode));
generic_fillattr(dentry->d_inode, stat);
stat->blocks = lower_stat.blocks;
}
diff --git a/fs/eventfd.c b/fs/eventfd.c
index e0194b3e14d6..d9a591773919 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -99,7 +99,7 @@ EXPORT_SYMBOL_GPL(eventfd_ctx_get);
* @ctx: [in] Pointer to eventfd context.
*
* The eventfd context reference must have been previously acquired either
- * with eventfd_ctx_get() or eventfd_ctx_fdget()).
+ * with eventfd_ctx_get() or eventfd_ctx_fdget().
*/
void eventfd_ctx_put(struct eventfd_ctx *ctx)
{
@@ -146,9 +146,9 @@ static void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt)
* eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
* @ctx: [in] Pointer to eventfd context.
* @wait: [in] Wait queue to be removed.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
*
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
*
* -EAGAIN : The operation would have blocked.
*
@@ -175,11 +175,11 @@ EXPORT_SYMBOL_GPL(eventfd_ctx_remove_wait_queue);
* eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
* @ctx: [in] Pointer to eventfd context.
* @no_wait: [in] Different from zero if the operation should not block.
- * @cnt: [out] Pointer to the 64bit conter value.
+ * @cnt: [out] Pointer to the 64-bit counter value.
*
- * Returns zero if successful, or the following error codes:
+ * Returns %0 if successful, or the following error codes:
*
- * -EAGAIN : The operation would have blocked but @no_wait was nonzero.
+ * -EAGAIN : The operation would have blocked but @no_wait was non-zero.
* -ERESTARTSYS : A signal interrupted the wait operation.
*
* If @no_wait is zero, the function might sleep until the eventfd internal
diff --git a/include/linux/module.h b/include/linux/module.h
index 9bdf27c7615b..5de42043dff0 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -62,7 +62,7 @@ struct module_version_attribute {
struct module_attribute mattr;
const char *module_name;
const char *version;
-};
+} __attribute__ ((__aligned__(sizeof(void *))));
struct module_kobject
{
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index dff633d62e5b..35b36b86d762 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -252,8 +252,12 @@ static int ceph_tcp_recvmsg(struct socket *sock, void *buf, size_t len)
{
struct kvec iov = {buf, len};
struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+ int r;
- return kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+ r = kernel_recvmsg(sock, &msg, &iov, 1, len, msg.msg_flags);
+ if (r == -EAGAIN)
+ r = 0;
+ return r;
}
/*
@@ -264,13 +268,17 @@ static int ceph_tcp_sendmsg(struct socket *sock, struct kvec *iov,
size_t kvlen, size_t len, int more)
{
struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
+ int r;
if (more)
msg.msg_flags |= MSG_MORE;
else
msg.msg_flags |= MSG_EOR; /* superfluous, but what the hell */
- return kernel_sendmsg(sock, &msg, iov, kvlen, len);
+ r = kernel_sendmsg(sock, &msg, iov, kvlen, len);
+ if (r == -EAGAIN)
+ r = 0;
+ return r;
}
@@ -847,6 +855,8 @@ static int write_partial_msg_pages(struct ceph_connection *con)
(msg->pages || msg->pagelist || msg->bio || in_trail))
kunmap(page);
+ if (ret == -EAGAIN)
+ ret = 0;
if (ret <= 0)
goto out;
@@ -1737,16 +1747,12 @@ static int try_write(struct ceph_connection *con)
if (con->out_skip) {
ret = write_partial_skip(con);
if (ret <= 0)
- goto done;
- if (ret < 0) {
- dout("try_write write_partial_skip err %d\n", ret);
- goto done;
- }
+ goto out;
}
if (con->out_kvec_left) {
ret = write_partial_kvec(con);
if (ret <= 0)
- goto done;
+ goto out;
}
/* msg pages? */
@@ -1761,11 +1767,11 @@ static int try_write(struct ceph_connection *con)
if (ret == 1)
goto more_kvec; /* we need to send the footer, too! */
if (ret == 0)
- goto done;
+ goto out;
if (ret < 0) {
dout("try_write write_partial_msg_pages err %d\n",
ret);
- goto done;
+ goto out;
}
}
@@ -1789,10 +1795,9 @@ static int try_write(struct ceph_connection *con)
/* Nothing to do! */
clear_bit(WRITE_PENDING, &con->state);
dout("try_write nothing else to write.\n");
-done:
ret = 0;
out:
- dout("try_write done on %p\n", con);
+ dout("try_write done on %p ret %d\n", con, ret);
return ret;
}
@@ -1821,19 +1826,17 @@ static int try_read(struct ceph_connection *con)
dout("try_read connecting\n");
ret = read_partial_banner(con);
if (ret <= 0)
- goto done;
- if (process_banner(con) < 0) {
- ret = -1;
goto out;
- }
+ ret = process_banner(con);
+ if (ret < 0)
+ goto out;
}
ret = read_partial_connect(con);
if (ret <= 0)
- goto done;
- if (process_connect(con) < 0) {
- ret = -1;
goto out;
- }
+ ret = process_connect(con);
+ if (ret < 0)
+ goto out;
goto more;
}
@@ -1848,7 +1851,7 @@ static int try_read(struct ceph_connection *con)
dout("skipping %d / %d bytes\n", skip, -con->in_base_pos);
ret = ceph_tcp_recvmsg(con->sock, buf, skip);
if (ret <= 0)
- goto done;
+ goto out;
con->in_base_pos += ret;
if (con->in_base_pos)
goto more;
@@ -1859,7 +1862,7 @@ static int try_read(struct ceph_connection *con)
*/
ret = ceph_tcp_recvmsg(con->sock, &con->in_tag, 1);
if (ret <= 0)
- goto done;
+ goto out;
dout("try_read got tag %d\n", (int)con->in_tag);
switch (con->in_tag) {
case CEPH_MSGR_TAG_MSG:
@@ -1870,7 +1873,7 @@ static int try_read(struct ceph_connection *con)
break;
case CEPH_MSGR_TAG_CLOSE:
set_bit(CLOSED, &con->state); /* fixme */
- goto done;
+ goto out;
default:
goto bad_tag;
}
@@ -1882,13 +1885,12 @@ static int try_read(struct ceph_connection *con)
case -EBADMSG:
con->error_msg = "bad crc";
ret = -EIO;
- goto out;
+ break;
case -EIO:
con->error_msg = "io error";
- goto out;
- default:
- goto done;
+ break;
}
+ goto out;
}
if (con->in_tag == CEPH_MSGR_TAG_READY)
goto more;
@@ -1898,15 +1900,13 @@ static int try_read(struct ceph_connection *con)
if (con->in_tag == CEPH_MSGR_TAG_ACK) {
ret = read_partial_ack(con);
if (ret <= 0)
- goto done;
+ goto out;
process_ack(con);
goto more;
}
-done:
- ret = 0;
out:
- dout("try_read done on %p\n", con);
+ dout("try_read done on %p ret %d\n", con, ret);
return ret;
bad_tag:
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index c9a16abacab4..6c94c6ce2925 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -315,6 +315,7 @@ static void parse_dep_file(void *map, size_t len)
char *end = m + len;
char *p;
char s[PATH_MAX];
+ int first;
p = strchr(m, ':');
if (!p) {
@@ -327,6 +328,7 @@ static void parse_dep_file(void *map, size_t len)
clear_config();
+ first = 1;
while (m < end) {
while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
m++;
@@ -340,9 +342,17 @@ static void parse_dep_file(void *map, size_t len)
if (strrcmp(s, "include/generated/autoconf.h") &&
strrcmp(s, "arch/um/include/uml-config.h") &&
strrcmp(s, ".ver")) {
- printf(" %s \\\n", s);
+ /*
+ * Do not output the first dependency (the
+ * source file), so that kbuild is not confused
+ * if a .c file is rewritten into .S or vice
+ * versa.
+ */
+ if (!first)
+ printf(" %s \\\n", s);
do_config_file(s);
}
+ first = 0;
m = p + 1;
}
printf("\n%s: $(deps_%s)\n\n", target, target);
diff --git a/sound/pci/au88x0/au88x0_core.c b/sound/pci/au88x0/au88x0_core.c
index 23f49f356e0f..16c0bdfbb164 100644
--- a/sound/pci/au88x0/au88x0_core.c
+++ b/sound/pci/au88x0/au88x0_core.c
@@ -1252,11 +1252,19 @@ static void vortex_adbdma_resetup(vortex_t *vortex, int adbdma) {
static int inline vortex_adbdma_getlinearpos(vortex_t * vortex, int adbdma)
{
stream_t *dma = &vortex->dma_adb[adbdma];
- int temp;
+ int temp, page, delta;
temp = hwread(vortex->mmio, VORTEX_ADBDMA_STAT + (adbdma << 2));
- temp = (dma->period_virt * dma->period_bytes) + (temp & (dma->period_bytes - 1));
- return temp;
+ page = (temp & ADB_SUBBUF_MASK) >> ADB_SUBBUF_SHIFT;
+ if (dma->nr_periods >= 4)
+ delta = (page - dma->period_real) & 3;
+ else {
+ delta = (page - dma->period_real);
+ if (delta < 0)
+ delta += dma->nr_periods;
+ }
+ return (dma->period_virt + delta) * dma->period_bytes
+ + (temp & (dma->period_bytes - 1));
}
static void vortex_adbdma_startfifo(vortex_t * vortex, int adbdma)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0baffcdee8f9..fcedad9a5fef 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2308,6 +2308,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x8410, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1106, 0x3288, "ASUS M2V-MX SE", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1179, 0xff10, "Toshiba A100-259", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index fbe97d32140d..dd7c5c12225d 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3410,7 +3410,7 @@ static void cx_auto_parse_output(struct hda_codec *codec)
}
}
spec->multiout.dac_nids = spec->private_dac_nids;
- spec->multiout.max_channels = nums * 2;
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (cfg->hp_outs > 0)
spec->auto_mute = 1;
@@ -3729,9 +3729,9 @@ static int cx_auto_init(struct hda_codec *codec)
return 0;
}
-static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
+static int cx_auto_add_volume_idx(struct hda_codec *codec, const char *basename,
const char *dir, int cidx,
- hda_nid_t nid, int hda_dir)
+ hda_nid_t nid, int hda_dir, int amp_idx)
{
static char name[32];
static struct snd_kcontrol_new knew[] = {
@@ -3743,7 +3743,8 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
for (i = 0; i < 2; i++) {
struct snd_kcontrol *kctl;
- knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, hda_dir);
+ knew[i].private_value = HDA_COMPOSE_AMP_VAL(nid, 3, amp_idx,
+ hda_dir);
knew[i].subdevice = HDA_SUBDEV_AMP_FLAG;
knew[i].index = cidx;
snprintf(name, sizeof(name), "%s%s %s", basename, dir, sfx[i]);
@@ -3759,6 +3760,9 @@ static int cx_auto_add_volume(struct hda_codec *codec, const char *basename,
return 0;
}
+#define cx_auto_add_volume(codec, str, dir, cidx, nid, hda_dir) \
+ cx_auto_add_volume_idx(codec, str, dir, cidx, nid, hda_dir, 0)
+
#define cx_auto_add_pb_volume(codec, nid, str, idx) \
cx_auto_add_volume(codec, str, " Playback", idx, nid, HDA_OUTPUT)
@@ -3808,29 +3812,60 @@ static int cx_auto_build_input_controls(struct hda_codec *codec)
struct conexant_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
static const char *prev_label;
- int i, err, cidx;
+ int i, err, cidx, conn_len;
+ hda_nid_t conn[HDA_MAX_CONNECTIONS];
+
+ int multi_adc_volume = 0; /* If the ADC nid has several input volumes */
+ int adc_nid = spec->adc_nids[0];
+
+ conn_len = snd_hda_get_connections(codec, adc_nid, conn,
+ HDA_MAX_CONNECTIONS);
+ if (conn_len < 0)
+ return conn_len;
+
+ multi_adc_volume = cfg->num_inputs > 1 && conn_len > 1;
+ if (!multi_adc_volume) {
+ err = cx_auto_add_volume(codec, "Capture", "", 0, adc_nid,
+ HDA_INPUT);
+ if (err < 0)
+ return err;
+ }
- err = cx_auto_add_volume(codec, "Capture", "", 0, spec->adc_nids[0],
- HDA_INPUT);
- if (err < 0)
- return err;
prev_label = NULL;
cidx = 0;
for (i = 0; i < cfg->num_inputs; i++) {
hda_nid_t nid = cfg->inputs[i].pin;
const char *label;
- if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP))
+ int j;
+ int pin_amp = get_wcaps(codec, nid) & AC_WCAP_IN_AMP;
+ if (!pin_amp && !multi_adc_volume)
continue;
+
label = hda_get_autocfg_input_label(codec, cfg, i);
if (label == prev_label)
cidx++;
else
cidx = 0;
prev_label = label;
- err = cx_auto_add_volume(codec, label, " Capture", cidx,
- nid, HDA_INPUT);
- if (err < 0)
- return err;
+
+ if (pin_amp) {
+ err = cx_auto_add_volume(codec, label, " Boost", cidx,
+ nid, HDA_INPUT);
+ if (err < 0)
+ return err;
+ }
+
+ if (!multi_adc_volume)
+ continue;
+ for (j = 0; j < conn_len; j++) {
+ if (conn[j] == nid) {
+ err = cx_auto_add_volume_idx(codec, label,
+ " Capture", cidx, adc_nid, HDA_INPUT, j);
+ if (err < 0)
+ return err;
+ break;
+ }
+ }
}
return 0;
}
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 68b97477577b..66eabafb1c24 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -785,7 +785,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
}
dev->pcm->private_data = dev;
- strcpy(dev->pcm->name, dev->product_name);
+ strlcpy(dev->pcm->name, dev->product_name, sizeof(dev->pcm->name));
memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
diff --git a/sound/usb/caiaq/midi.c b/sound/usb/caiaq/midi.c
index 2f218c77fff2..a1a47088fd0c 100644
--- a/sound/usb/caiaq/midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -136,7 +136,7 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
if (ret < 0)
return ret;
- strcpy(rmidi->name, device->product_name);
+ strlcpy(rmidi->name, device->product_name, sizeof(rmidi->name));
rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
rmidi->private_data = device;