Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: myri10ge: update driver version to 1.3.0-1.233 myri10ge: more Intel chipsets providing aligned PCIe completions myri10ge: fix management of the firmware 4KB boundary crossing restriction cxgb3 - missing CPL hanler and register setting. cxgb3 - MAC watchdog update cxgb3 - avoid deadlock with mac watchdog skge: fix wake on lan sky2: phy workarounds for Yukon EC-U A1 sky2: turn on clocks when doing resume sky2: turn carrier off when down skge: turn carrier off when down [PATCH] bcm43xx: Fix PPC machine checks and match loopback gain specs [PATCH] bcm43xx: Fix 802.11b/g scan limits to match regulatory reqs [PATCH] zd1211rw: Fix E2P_PHY_REG patching [PATCH] zd1211rw: Reject AL2230S devices
This commit is contained in:
commit
73aba63c5d
13 changed files with 260 additions and 137 deletions
|
@ -478,8 +478,11 @@ struct cmac {
|
|||
struct adapter *adapter;
|
||||
unsigned int offset;
|
||||
unsigned int nucast; /* # of address filters for unicast MACs */
|
||||
unsigned int tcnt;
|
||||
unsigned int xcnt;
|
||||
unsigned int tx_tcnt;
|
||||
unsigned int tx_xcnt;
|
||||
u64 tx_mcnt;
|
||||
unsigned int rx_xcnt;
|
||||
u64 rx_mcnt;
|
||||
unsigned int toggle_cnt;
|
||||
unsigned int txen;
|
||||
struct mac_stats stats;
|
||||
|
|
|
@ -194,15 +194,13 @@ void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat,
|
|||
|
||||
if (link_stat != netif_carrier_ok(dev)) {
|
||||
if (link_stat) {
|
||||
t3_set_reg_field(adapter,
|
||||
A_XGM_TXFIFO_CFG + mac->offset,
|
||||
F_ENDROPPKT, 0);
|
||||
t3_mac_enable(mac, MAC_DIRECTION_RX);
|
||||
netif_carrier_on(dev);
|
||||
} else {
|
||||
netif_carrier_off(dev);
|
||||
t3_set_reg_field(adapter,
|
||||
A_XGM_TXFIFO_CFG + mac->offset,
|
||||
F_ENDROPPKT, F_ENDROPPKT);
|
||||
pi->phy.ops->power_down(&pi->phy, 1);
|
||||
t3_mac_disable(mac, MAC_DIRECTION_RX);
|
||||
t3_link_start(&pi->phy, mac, &pi->link_config);
|
||||
}
|
||||
|
||||
link_report(dev);
|
||||
|
@ -772,6 +770,8 @@ static int cxgb_up(struct adapter *adap)
|
|||
if (err)
|
||||
goto out;
|
||||
|
||||
t3_write_reg(adap, A_ULPRX_TDDP_PSZ, V_HPZ0(PAGE_SHIFT - 12));
|
||||
|
||||
err = setup_sge_qsets(adap);
|
||||
if (err)
|
||||
goto out;
|
||||
|
@ -2119,7 +2119,9 @@ static void check_t3b2_mac(struct adapter *adapter)
|
|||
{
|
||||
int i;
|
||||
|
||||
rtnl_lock(); /* synchronize with ifdown */
|
||||
if (!rtnl_trylock()) /* synchronize with ifdown */
|
||||
return;
|
||||
|
||||
for_each_port(adapter, i) {
|
||||
struct net_device *dev = adapter->port[i];
|
||||
struct port_info *p = netdev_priv(dev);
|
||||
|
|
|
@ -743,17 +743,6 @@ static int do_act_establish(struct t3cdev *dev, struct sk_buff *skb)
|
|||
}
|
||||
}
|
||||
|
||||
static int do_set_tcb_rpl(struct t3cdev *dev, struct sk_buff *skb)
|
||||
{
|
||||
struct cpl_set_tcb_rpl *rpl = cplhdr(skb);
|
||||
|
||||
if (rpl->status != CPL_ERR_NONE)
|
||||
printk(KERN_ERR
|
||||
"Unexpected SET_TCB_RPL status %u for tid %u\n",
|
||||
rpl->status, GET_TID(rpl));
|
||||
return CPL_RET_BUF_DONE;
|
||||
}
|
||||
|
||||
static int do_trace(struct t3cdev *dev, struct sk_buff *skb)
|
||||
{
|
||||
struct cpl_trace_pkt *p = cplhdr(skb);
|
||||
|
@ -1215,7 +1204,8 @@ void __init cxgb3_offload_init(void)
|
|||
t3_register_cpl_handler(CPL_CLOSE_CON_RPL, do_hwtid_rpl);
|
||||
t3_register_cpl_handler(CPL_ABORT_REQ_RSS, do_abort_req_rss);
|
||||
t3_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish);
|
||||
t3_register_cpl_handler(CPL_SET_TCB_RPL, do_set_tcb_rpl);
|
||||
t3_register_cpl_handler(CPL_SET_TCB_RPL, do_hwtid_rpl);
|
||||
t3_register_cpl_handler(CPL_GET_TCB_RPL, do_hwtid_rpl);
|
||||
t3_register_cpl_handler(CPL_RDMA_TERMINATE, do_term);
|
||||
t3_register_cpl_handler(CPL_RDMA_EC_STATUS, do_hwtid_rpl);
|
||||
t3_register_cpl_handler(CPL_TRACE_PKT, do_trace);
|
||||
|
|
|
@ -1234,9 +1234,15 @@
|
|||
|
||||
#define A_ULPRX_ISCSI_TAGMASK 0x514
|
||||
|
||||
#define S_HPZ0 0
|
||||
#define M_HPZ0 0xf
|
||||
#define V_HPZ0(x) ((x) << S_HPZ0)
|
||||
#define G_HPZ0(x) (((x) >> S_HPZ0) & M_HPZ0)
|
||||
|
||||
#define A_ULPRX_TDDP_LLIMIT 0x51c
|
||||
|
||||
#define A_ULPRX_TDDP_ULIMIT 0x520
|
||||
#define A_ULPRX_TDDP_PSZ 0x528
|
||||
|
||||
#define A_ULPRX_STAG_LLIMIT 0x52c
|
||||
|
||||
|
|
|
@ -367,7 +367,8 @@ int t3_mac_enable(struct cmac *mac, int which)
|
|||
int idx = macidx(mac);
|
||||
struct adapter *adap = mac->adapter;
|
||||
unsigned int oft = mac->offset;
|
||||
|
||||
struct mac_stats *s = &mac->stats;
|
||||
|
||||
if (which & MAC_DIRECTION_TX) {
|
||||
t3_write_reg(adap, A_XGM_TX_CTRL + oft, F_TXEN);
|
||||
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx);
|
||||
|
@ -376,10 +377,16 @@ int t3_mac_enable(struct cmac *mac, int which)
|
|||
t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
|
||||
|
||||
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CNT_CH0 + idx);
|
||||
mac->tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
|
||||
A_TP_PIO_DATA)));
|
||||
mac->xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
|
||||
A_XGM_TX_SPI4_SOP_EOP_CNT)));
|
||||
mac->tx_mcnt = s->tx_frames;
|
||||
mac->tx_tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
|
||||
A_TP_PIO_DATA)));
|
||||
mac->tx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
|
||||
A_XGM_TX_SPI4_SOP_EOP_CNT +
|
||||
oft)));
|
||||
mac->rx_mcnt = s->rx_frames;
|
||||
mac->rx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
|
||||
A_XGM_RX_SPI4_SOP_EOP_CNT +
|
||||
oft)));
|
||||
mac->txen = F_TXEN;
|
||||
mac->toggle_cnt = 0;
|
||||
}
|
||||
|
@ -392,6 +399,7 @@ int t3_mac_disable(struct cmac *mac, int which)
|
|||
{
|
||||
int idx = macidx(mac);
|
||||
struct adapter *adap = mac->adapter;
|
||||
int val;
|
||||
|
||||
if (which & MAC_DIRECTION_TX) {
|
||||
t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
|
||||
|
@ -401,44 +409,89 @@ int t3_mac_disable(struct cmac *mac, int which)
|
|||
t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
|
||||
mac->txen = 0;
|
||||
}
|
||||
if (which & MAC_DIRECTION_RX)
|
||||
if (which & MAC_DIRECTION_RX) {
|
||||
t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset,
|
||||
F_PCS_RESET_, 0);
|
||||
msleep(100);
|
||||
t3_write_reg(adap, A_XGM_RX_CTRL + mac->offset, 0);
|
||||
val = F_MAC_RESET_;
|
||||
if (is_10G(adap))
|
||||
val |= F_PCS_RESET_;
|
||||
else if (uses_xaui(adap))
|
||||
val |= F_PCS_RESET_ | F_XG2G_RESET_;
|
||||
else
|
||||
val |= F_RGMII_RESET_ | F_XG2G_RESET_;
|
||||
t3_write_reg(mac->adapter, A_XGM_RESET_CTRL + mac->offset, val);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
int t3b2_mac_watchdog_task(struct cmac *mac)
|
||||
{
|
||||
struct adapter *adap = mac->adapter;
|
||||
unsigned int tcnt, xcnt;
|
||||
struct mac_stats *s = &mac->stats;
|
||||
unsigned int tx_tcnt, tx_xcnt;
|
||||
unsigned int tx_mcnt = s->tx_frames;
|
||||
unsigned int rx_mcnt = s->rx_frames;
|
||||
unsigned int rx_xcnt;
|
||||
int status;
|
||||
|
||||
t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CNT_CH0 + macidx(mac));
|
||||
tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap, A_TP_PIO_DATA)));
|
||||
xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
|
||||
A_XGM_TX_SPI4_SOP_EOP_CNT +
|
||||
mac->offset)));
|
||||
|
||||
if (tcnt != mac->tcnt && xcnt == 0 && mac->xcnt == 0) {
|
||||
if (mac->toggle_cnt > 4) {
|
||||
t3b2_mac_reset(mac);
|
||||
mac->toggle_cnt = 0;
|
||||
status = 2;
|
||||
if (tx_mcnt == mac->tx_mcnt) {
|
||||
tx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
|
||||
A_XGM_TX_SPI4_SOP_EOP_CNT +
|
||||
mac->offset)));
|
||||
if (tx_xcnt == 0) {
|
||||
t3_write_reg(adap, A_TP_PIO_ADDR,
|
||||
A_TP_TX_DROP_CNT_CH0 + macidx(mac));
|
||||
tx_tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
|
||||
A_TP_PIO_DATA)));
|
||||
} else {
|
||||
t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
|
||||
t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset);
|
||||
t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset,
|
||||
mac->txen);
|
||||
t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset);
|
||||
mac->toggle_cnt++;
|
||||
status = 1;
|
||||
}
|
||||
mac->toggle_cnt = 0;
|
||||
return 0;
|
||||
}
|
||||
} else {
|
||||
mac->toggle_cnt = 0;
|
||||
status = 0;
|
||||
return 0;
|
||||
}
|
||||
mac->tcnt = tcnt;
|
||||
mac->xcnt = xcnt;
|
||||
|
||||
if (((tx_tcnt != mac->tx_tcnt) &&
|
||||
(tx_xcnt == 0) && (mac->tx_xcnt == 0)) ||
|
||||
((mac->tx_mcnt == tx_mcnt) &&
|
||||
(tx_xcnt != 0) && (mac->tx_xcnt != 0))) {
|
||||
if (mac->toggle_cnt > 4)
|
||||
status = 2;
|
||||
else
|
||||
status = 1;
|
||||
} else {
|
||||
mac->toggle_cnt = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (rx_mcnt != mac->rx_mcnt)
|
||||
rx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
|
||||
A_XGM_RX_SPI4_SOP_EOP_CNT +
|
||||
mac->offset)));
|
||||
else
|
||||
return 0;
|
||||
|
||||
if (mac->rx_mcnt != s->rx_frames && rx_xcnt == 0 && mac->rx_xcnt == 0)
|
||||
status = 2;
|
||||
|
||||
mac->tx_tcnt = tx_tcnt;
|
||||
mac->tx_xcnt = tx_xcnt;
|
||||
mac->tx_mcnt = s->tx_frames;
|
||||
mac->rx_xcnt = rx_xcnt;
|
||||
mac->rx_mcnt = s->rx_frames;
|
||||
if (status == 1) {
|
||||
t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
|
||||
t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset); /* flush */
|
||||
t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, mac->txen);
|
||||
t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset); /* flush */
|
||||
mac->toggle_cnt++;
|
||||
} else if (status == 2) {
|
||||
t3b2_mac_reset(mac);
|
||||
mac->toggle_cnt = 0;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
|
|
|
@ -71,7 +71,7 @@
|
|||
#include "myri10ge_mcp.h"
|
||||
#include "myri10ge_mcp_gen_header.h"
|
||||
|
||||
#define MYRI10GE_VERSION_STR "1.3.0-1.227"
|
||||
#define MYRI10GE_VERSION_STR "1.3.0-1.233"
|
||||
|
||||
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
|
||||
MODULE_AUTHOR("Maintainer: help@myri.com");
|
||||
|
@ -900,19 +900,9 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
|
|||
/* try to refill entire ring */
|
||||
while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
|
||||
idx = rx->fill_cnt & rx->mask;
|
||||
|
||||
if ((bytes < MYRI10GE_ALLOC_SIZE / 2) &&
|
||||
(rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) {
|
||||
if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
|
||||
/* we can use part of previous page */
|
||||
get_page(rx->page);
|
||||
#if MYRI10GE_ALLOC_SIZE > 4096
|
||||
/* Firmware cannot cross 4K boundary.. */
|
||||
if ((rx->page_offset >> 12) !=
|
||||
((rx->page_offset + bytes - 1) >> 12)) {
|
||||
rx->page_offset =
|
||||
(rx->page_offset + bytes) & ~4095;
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
/* we need a new page */
|
||||
page =
|
||||
|
@ -941,6 +931,13 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
|
|||
|
||||
/* start next packet on a cacheline boundary */
|
||||
rx->page_offset += SKB_DATA_ALIGN(bytes);
|
||||
|
||||
#if MYRI10GE_ALLOC_SIZE > 4096
|
||||
/* don't cross a 4KB boundary */
|
||||
if ((rx->page_offset >> 12) !=
|
||||
((rx->page_offset + bytes - 1) >> 12))
|
||||
rx->page_offset = (rx->page_offset + 4096) & ~4095;
|
||||
#endif
|
||||
rx->fill_cnt++;
|
||||
|
||||
/* copy 8 descriptors to the firmware at a time */
|
||||
|
@ -2490,6 +2487,10 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
|
|||
|
||||
#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7
|
||||
#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa
|
||||
#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 0x3510
|
||||
#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4 0x351b
|
||||
#define PCI_DEVICE_ID_INTEL_E3000_PCIE 0x2779
|
||||
#define PCI_DEVICE_ID_INTEL_E3010_PCIE 0x277a
|
||||
#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST 0x140
|
||||
#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST 0x142
|
||||
|
||||
|
@ -2529,6 +2530,18 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
|
|||
PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST
|
||||
&& bridge->device <=
|
||||
PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST)
|
||||
/* All Intel E3000/E3010 PCIE ports */
|
||||
|| (bridge->vendor == PCI_VENDOR_ID_INTEL
|
||||
&& (bridge->device ==
|
||||
PCI_DEVICE_ID_INTEL_E3000_PCIE
|
||||
|| bridge->device ==
|
||||
PCI_DEVICE_ID_INTEL_E3010_PCIE))
|
||||
/* All Intel 6310/6311/6321ESB PCIE ports */
|
||||
|| (bridge->vendor == PCI_VENDOR_ID_INTEL
|
||||
&& bridge->device >=
|
||||
PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1
|
||||
&& bridge->device <=
|
||||
PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4)
|
||||
/* All Intel E5000 PCIE ports */
|
||||
|| (bridge->vendor == PCI_VENDOR_ID_INTEL
|
||||
&& bridge->device >=
|
||||
|
|
|
@ -163,27 +163,46 @@ static void skge_wol_init(struct skge_port *skge)
|
|||
{
|
||||
struct skge_hw *hw = skge->hw;
|
||||
int port = skge->port;
|
||||
enum pause_control save_mode;
|
||||
u32 ctrl;
|
||||
u16 ctrl;
|
||||
|
||||
/* Bring hardware out of reset */
|
||||
skge_write16(hw, B0_CTST, CS_RST_CLR);
|
||||
skge_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
|
||||
|
||||
skge_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
|
||||
skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
|
||||
/* Turn on Vaux */
|
||||
skge_write8(hw, B0_POWER_CTRL,
|
||||
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
|
||||
|
||||
/* WA code for COMA mode -- clear PHY reset */
|
||||
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
|
||||
hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
|
||||
u32 reg = skge_read32(hw, B2_GP_IO);
|
||||
reg |= GP_DIR_9;
|
||||
reg &= ~GP_IO_9;
|
||||
skge_write32(hw, B2_GP_IO, reg);
|
||||
}
|
||||
|
||||
skge_write32(hw, SK_REG(port, GPHY_CTRL),
|
||||
GPC_DIS_SLEEP |
|
||||
GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0 |
|
||||
GPC_ANEG_1 | GPC_RST_SET);
|
||||
|
||||
skge_write32(hw, SK_REG(port, GPHY_CTRL),
|
||||
GPC_DIS_SLEEP |
|
||||
GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0 |
|
||||
GPC_ANEG_1 | GPC_RST_CLR);
|
||||
|
||||
skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
|
||||
|
||||
/* Force to 10/100 skge_reset will re-enable on resume */
|
||||
save_mode = skge->flow_control;
|
||||
skge->flow_control = FLOW_MODE_SYMMETRIC;
|
||||
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
|
||||
PHY_AN_100FULL | PHY_AN_100HALF |
|
||||
PHY_AN_10FULL | PHY_AN_10HALF| PHY_AN_CSMA);
|
||||
/* no 1000 HD/FD */
|
||||
gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, 0);
|
||||
gm_phy_write(hw, port, PHY_MARV_CTRL,
|
||||
PHY_CT_RESET | PHY_CT_SPS_LSB | PHY_CT_ANE |
|
||||
PHY_CT_RE_CFG | PHY_CT_DUP_MD);
|
||||
|
||||
ctrl = skge->advertising;
|
||||
skge->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
|
||||
|
||||
skge_phy_reset(skge);
|
||||
|
||||
skge->flow_control = save_mode;
|
||||
skge->advertising = ctrl;
|
||||
|
||||
/* Set GMAC to no flow control and auto update for speed/duplex */
|
||||
gma_write16(hw, port, GM_GP_CTRL,
|
||||
|
@ -227,12 +246,10 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|||
struct skge_port *skge = netdev_priv(dev);
|
||||
struct skge_hw *hw = skge->hw;
|
||||
|
||||
if (wol->wolopts & wol_supported(hw))
|
||||
if (wol->wolopts & ~wol_supported(hw))
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
skge->wol = wol->wolopts;
|
||||
if (!netif_running(dev))
|
||||
skge_wol_init(skge);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -2535,10 +2552,12 @@ static int skge_down(struct net_device *dev)
|
|||
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
|
||||
|
||||
netif_stop_queue(dev);
|
||||
|
||||
if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
|
||||
del_timer_sync(&skge->link_timer);
|
||||
|
||||
netif_poll_disable(dev);
|
||||
netif_carrier_off(dev);
|
||||
|
||||
spin_lock_irq(&hw->hw_lock);
|
||||
hw->intr_mask &= ~portmask[port];
|
||||
|
@ -3765,21 +3784,6 @@ static void __devexit skge_remove(struct pci_dev *pdev)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int vaux_avail(struct pci_dev *pdev)
|
||||
{
|
||||
int pm_cap;
|
||||
|
||||
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
|
||||
if (pm_cap) {
|
||||
u16 ctl;
|
||||
pci_read_config_word(pdev, pm_cap + PCI_PM_PMC, &ctl);
|
||||
if (ctl & PCI_PM_CAP_AUX_POWER)
|
||||
return 1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
|
||||
{
|
||||
struct skge_hw *hw = pci_get_drvdata(pdev);
|
||||
|
@ -3801,10 +3805,6 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
|
|||
wol |= skge->wol;
|
||||
}
|
||||
|
||||
if (wol && vaux_avail(pdev))
|
||||
skge_write8(hw, B0_POWER_CTRL,
|
||||
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
|
||||
|
||||
skge_write32(hw, B0_IMSK, 0);
|
||||
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
|
||||
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
||||
|
@ -3850,6 +3850,28 @@ static int skge_resume(struct pci_dev *pdev)
|
|||
}
|
||||
#endif
|
||||
|
||||
static void skge_shutdown(struct pci_dev *pdev)
|
||||
{
|
||||
struct skge_hw *hw = pci_get_drvdata(pdev);
|
||||
int i, wol = 0;
|
||||
|
||||
for (i = 0; i < hw->ports; i++) {
|
||||
struct net_device *dev = hw->dev[i];
|
||||
struct skge_port *skge = netdev_priv(dev);
|
||||
|
||||
if (skge->wol)
|
||||
skge_wol_init(skge);
|
||||
wol |= skge->wol;
|
||||
}
|
||||
|
||||
pci_enable_wake(pdev, PCI_D3hot, wol);
|
||||
pci_enable_wake(pdev, PCI_D3cold, wol);
|
||||
|
||||
pci_disable_device(pdev);
|
||||
pci_set_power_state(pdev, PCI_D3hot);
|
||||
|
||||
}
|
||||
|
||||
static struct pci_driver skge_driver = {
|
||||
.name = DRV_NAME,
|
||||
.id_table = skge_id_table,
|
||||
|
@ -3859,6 +3881,7 @@ static struct pci_driver skge_driver = {
|
|||
.suspend = skge_suspend,
|
||||
.resume = skge_resume,
|
||||
#endif
|
||||
.shutdown = skge_shutdown,
|
||||
};
|
||||
|
||||
static int __init skge_init_module(void)
|
||||
|
|
|
@ -510,9 +510,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
|
|||
ledover &= ~PHY_M_LED_MO_RX;
|
||||
}
|
||||
|
||||
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
|
||||
if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
|
||||
hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
|
||||
/* apply fixes in PHY AFE */
|
||||
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
|
||||
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
|
||||
|
||||
/* increase differential signal amplitude in 10BASE-T */
|
||||
|
@ -524,7 +524,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
|
|||
gm_phy_write(hw, port, 0x17, 0x2002);
|
||||
|
||||
/* set page register to 0 */
|
||||
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
|
||||
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
|
||||
} else if (hw->chip_id != CHIP_ID_YUKON_EX) {
|
||||
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
|
||||
|
||||
|
@ -1561,6 +1561,7 @@ static int sky2_down(struct net_device *dev)
|
|||
|
||||
/* Stop more packets from being queued */
|
||||
netif_stop_queue(dev);
|
||||
netif_carrier_off(dev);
|
||||
|
||||
/* Disable port IRQ */
|
||||
imask = sky2_read32(hw, B0_IMSK);
|
||||
|
@ -3769,6 +3770,11 @@ static int sky2_resume(struct pci_dev *pdev)
|
|||
goto out;
|
||||
|
||||
pci_enable_wake(pdev, PCI_D0, 0);
|
||||
|
||||
/* Re-enable all clocks */
|
||||
if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
|
||||
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
|
||||
|
||||
sky2_reset(hw);
|
||||
|
||||
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
|
||||
|
|
|
@ -946,6 +946,7 @@ static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
|
|||
u8 channel;
|
||||
struct bcm43xx_phyinfo *phy;
|
||||
const char *iso_country;
|
||||
u8 max_bg_channel;
|
||||
|
||||
geo = kzalloc(sizeof(*geo), GFP_KERNEL);
|
||||
if (!geo)
|
||||
|
@ -967,6 +968,23 @@ static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
|
|||
}
|
||||
iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
|
||||
|
||||
/* set the maximum channel based on locale set in sprom or witle locale option */
|
||||
switch (bcm->sprom.locale) {
|
||||
case BCM43xx_LOCALE_THAILAND:
|
||||
case BCM43xx_LOCALE_ISRAEL:
|
||||
case BCM43xx_LOCALE_JORDAN:
|
||||
case BCM43xx_LOCALE_USA_CANADA_ANZ:
|
||||
case BCM43xx_LOCALE_USA_LOW:
|
||||
max_bg_channel = 11;
|
||||
break;
|
||||
case BCM43xx_LOCALE_JAPAN:
|
||||
case BCM43xx_LOCALE_JAPAN_HIGH:
|
||||
max_bg_channel = 14;
|
||||
break;
|
||||
default:
|
||||
max_bg_channel = 13;
|
||||
}
|
||||
|
||||
if (have_a) {
|
||||
for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
|
||||
channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
|
||||
|
@ -978,7 +996,7 @@ static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
|
|||
}
|
||||
if (have_bg) {
|
||||
for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
|
||||
channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
|
||||
channel <= max_bg_channel; channel++) {
|
||||
chan = &geo->bg[i++];
|
||||
chan->freq = bcm43xx_channel_to_freq_bg(channel);
|
||||
chan->channel = channel;
|
||||
|
|
|
@ -978,7 +978,7 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
|
|||
{
|
||||
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
|
||||
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
|
||||
u16 backup_phy[15];
|
||||
u16 backup_phy[15] = {0};
|
||||
u16 backup_radio[3];
|
||||
u16 backup_bband;
|
||||
u16 i;
|
||||
|
@ -989,8 +989,10 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
|
|||
backup_phy[1] = bcm43xx_phy_read(bcm, 0x0001);
|
||||
backup_phy[2] = bcm43xx_phy_read(bcm, 0x0811);
|
||||
backup_phy[3] = bcm43xx_phy_read(bcm, 0x0812);
|
||||
backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
|
||||
backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
|
||||
if (phy->rev != 1) {
|
||||
backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
|
||||
backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
|
||||
}
|
||||
backup_phy[6] = bcm43xx_phy_read(bcm, 0x005A);
|
||||
backup_phy[7] = bcm43xx_phy_read(bcm, 0x0059);
|
||||
backup_phy[8] = bcm43xx_phy_read(bcm, 0x0058);
|
||||
|
@ -1018,14 +1020,16 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
|
|||
bcm43xx_phy_read(bcm, 0x0811) | 0x0001);
|
||||
bcm43xx_phy_write(bcm, 0x0812,
|
||||
bcm43xx_phy_read(bcm, 0x0812) & 0xFFFE);
|
||||
bcm43xx_phy_write(bcm, 0x0814,
|
||||
bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
|
||||
bcm43xx_phy_write(bcm, 0x0815,
|
||||
bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
|
||||
bcm43xx_phy_write(bcm, 0x0814,
|
||||
bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
|
||||
bcm43xx_phy_write(bcm, 0x0815,
|
||||
bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
|
||||
if (phy->rev != 1) {
|
||||
bcm43xx_phy_write(bcm, 0x0814,
|
||||
bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
|
||||
bcm43xx_phy_write(bcm, 0x0815,
|
||||
bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
|
||||
bcm43xx_phy_write(bcm, 0x0814,
|
||||
bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
|
||||
bcm43xx_phy_write(bcm, 0x0815,
|
||||
bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
|
||||
}
|
||||
bcm43xx_phy_write(bcm, 0x0811,
|
||||
bcm43xx_phy_read(bcm, 0x0811) | 0x000C);
|
||||
bcm43xx_phy_write(bcm, 0x0812,
|
||||
|
@ -1048,10 +1052,12 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
|
|||
bcm43xx_phy_read(bcm, 0x000A)
|
||||
| 0x2000);
|
||||
}
|
||||
bcm43xx_phy_write(bcm, 0x0814,
|
||||
bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
|
||||
bcm43xx_phy_write(bcm, 0x0815,
|
||||
bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
|
||||
if (phy->rev != 1) {
|
||||
bcm43xx_phy_write(bcm, 0x0814,
|
||||
bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
|
||||
bcm43xx_phy_write(bcm, 0x0815,
|
||||
bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
|
||||
}
|
||||
bcm43xx_phy_write(bcm, 0x0003,
|
||||
(bcm43xx_phy_read(bcm, 0x0003)
|
||||
& 0xFF9F) | 0x0040);
|
||||
|
@ -1138,8 +1144,10 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
|
|||
}
|
||||
}
|
||||
|
||||
bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
|
||||
bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
|
||||
if (phy->rev != 1) {
|
||||
bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
|
||||
bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
|
||||
}
|
||||
bcm43xx_phy_write(bcm, 0x005A, backup_phy[6]);
|
||||
bcm43xx_phy_write(bcm, 0x0059, backup_phy[7]);
|
||||
bcm43xx_phy_write(bcm, 0x0058, backup_phy[8]);
|
||||
|
@ -1188,24 +1196,23 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
|
|||
bcm43xx_phy_write(bcm, 0x0811, 0x0000);
|
||||
bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
|
||||
}
|
||||
if (phy->rev >= 3) {
|
||||
if (phy->rev > 5) {
|
||||
bcm43xx_phy_write(bcm, 0x0811, 0x0400);
|
||||
bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
|
||||
}
|
||||
if (phy->rev >= 2 && phy->connected) {
|
||||
tmp = bcm43xx_phy_read(bcm, 0x0400) & 0xFF;
|
||||
if (tmp < 6) {
|
||||
if (tmp ==3 || tmp == 5) {
|
||||
bcm43xx_phy_write(bcm, 0x04C2, 0x1816);
|
||||
bcm43xx_phy_write(bcm, 0x04C3, 0x8006);
|
||||
if (tmp != 3) {
|
||||
if (tmp == 5) {
|
||||
bcm43xx_phy_write(bcm, 0x04CC,
|
||||
(bcm43xx_phy_read(bcm, 0x04CC)
|
||||
& 0x00FF) | 0x1F00);
|
||||
}
|
||||
}
|
||||
}
|
||||
if (phy->rev < 3 && phy->connected)
|
||||
bcm43xx_phy_write(bcm, 0x047E, 0x0078);
|
||||
}
|
||||
if (radio->revision == 8) {
|
||||
bcm43xx_phy_write(bcm, 0x0801, bcm43xx_phy_read(bcm, 0x0801) | 0x0080);
|
||||
bcm43xx_phy_write(bcm, 0x043E, bcm43xx_phy_read(bcm, 0x043E) | 0x0004);
|
||||
|
@ -1232,7 +1239,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
|
|||
if (phy->rev >= 6) {
|
||||
bcm43xx_phy_write(bcm, 0x0036,
|
||||
(bcm43xx_phy_read(bcm, 0x0036)
|
||||
& 0xF000) | (radio->txctl2 << 12));
|
||||
& 0x0FFF) | (radio->txctl2 << 12));
|
||||
}
|
||||
if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
|
||||
bcm43xx_phy_write(bcm, 0x002E, 0x8075);
|
||||
|
@ -1243,7 +1250,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
|
|||
else
|
||||
bcm43xx_phy_write(bcm, 0x002F, 0x0202);
|
||||
}
|
||||
if (phy->connected) {
|
||||
if (phy->connected || phy->rev >= 2) {
|
||||
bcm43xx_phy_lo_adjust(bcm, 0);
|
||||
bcm43xx_phy_write(bcm, 0x080F, 0x8078);
|
||||
}
|
||||
|
@ -1257,7 +1264,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
|
|||
*/
|
||||
bcm43xx_nrssi_hw_update(bcm, 0xFFFF);
|
||||
bcm43xx_calc_nrssi_threshold(bcm);
|
||||
} else if (phy->connected) {
|
||||
} else if (phy->connected || phy->rev >= 2) {
|
||||
if (radio->nrssi[0] == -1000) {
|
||||
assert(radio->nrssi[1] == -1000);
|
||||
bcm43xx_calc_nrssi_slope(bcm);
|
||||
|
|
|
@ -337,6 +337,7 @@ static int read_pod(struct zd_chip *chip, u8 *rf_type)
|
|||
chip->patch_cr157 = (value >> 13) & 0x1;
|
||||
chip->patch_6m_band_edge = (value >> 21) & 0x1;
|
||||
chip->new_phy_layout = (value >> 31) & 0x1;
|
||||
chip->al2230s_bit = (value >> 7) & 0x1;
|
||||
chip->link_led = ((value >> 4) & 1) ? LED1 : LED2;
|
||||
chip->supports_tx_led = 1;
|
||||
if (value & (1 << 24)) { /* LED scenario */
|
||||
|
@ -591,16 +592,16 @@ int zd_chip_unlock_phy_regs(struct zd_chip *chip)
|
|||
return r;
|
||||
}
|
||||
|
||||
/* CR157 can be optionally patched by the EEPROM */
|
||||
/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
|
||||
static int patch_cr157(struct zd_chip *chip)
|
||||
{
|
||||
int r;
|
||||
u32 value;
|
||||
u16 value;
|
||||
|
||||
if (!chip->patch_cr157)
|
||||
return 0;
|
||||
|
||||
r = zd_ioread32_locked(chip, &value, E2P_PHY_REG);
|
||||
r = zd_ioread16_locked(chip, &value, E2P_PHY_REG);
|
||||
if (r)
|
||||
return r;
|
||||
|
||||
|
@ -790,11 +791,6 @@ static int zd1211b_hw_reset_phy(struct zd_chip *chip)
|
|||
goto out;
|
||||
|
||||
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
|
||||
if (r)
|
||||
goto unlock;
|
||||
|
||||
r = patch_cr157(chip);
|
||||
unlock:
|
||||
t = zd_chip_unlock_phy_regs(chip);
|
||||
if (t && !r)
|
||||
r = t;
|
||||
|
|
|
@ -641,8 +641,8 @@ enum {
|
|||
* also only 11 channels. */
|
||||
#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18)
|
||||
|
||||
#define E2P_PHY_REG E2P_DATA(0x1a)
|
||||
#define E2P_DEVICE_VER E2P_DATA(0x20)
|
||||
#define E2P_PHY_REG E2P_DATA(0x25)
|
||||
#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28)
|
||||
#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a)
|
||||
#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c)
|
||||
|
@ -711,7 +711,7 @@ struct zd_chip {
|
|||
u16 link_led;
|
||||
unsigned int pa_type:4,
|
||||
patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1,
|
||||
new_phy_layout:1,
|
||||
new_phy_layout:1, al2230s_bit:1,
|
||||
is_zd1211b:1, supports_tx_led:1;
|
||||
};
|
||||
|
||||
|
|
|
@ -358,6 +358,12 @@ int zd_rf_init_al2230(struct zd_rf *rf)
|
|||
{
|
||||
struct zd_chip *chip = zd_rf_to_chip(rf);
|
||||
|
||||
if (chip->al2230s_bit) {
|
||||
dev_err(zd_chip_dev(chip), "AL2230S devices are not yet "
|
||||
"supported by this driver.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
rf->switch_radio_off = al2230_switch_radio_off;
|
||||
if (chip->is_zd1211b) {
|
||||
rf->init_hw = zd1211b_al2230_init_hw;
|
||||
|
|
Loading…
Reference in a new issue