From 7355ba3445f2a741bfb9f03c7c8d5fc3e10bf63f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 2 Nov 2012 08:16:33 -0400 Subject: [PATCH] staging: fwserial: Add TTY-over-Firewire serial driver This patch provides the kernel driver for high-speed TTY communication over the IEEE 1394 bus. Signed-off-by: Peter Hurley Acked-by: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/fwserial/Kconfig | 9 + drivers/staging/fwserial/Makefile | 2 + drivers/staging/fwserial/TODO | 37 + drivers/staging/fwserial/dma_fifo.c | 310 +++ drivers/staging/fwserial/dma_fifo.h | 130 ++ drivers/staging/fwserial/fwserial.c | 2946 +++++++++++++++++++++++++++ drivers/staging/fwserial/fwserial.h | 387 ++++ 9 files changed, 3824 insertions(+) create mode 100644 drivers/staging/fwserial/Kconfig create mode 100644 drivers/staging/fwserial/Makefile create mode 100644 drivers/staging/fwserial/TODO create mode 100644 drivers/staging/fwserial/dma_fifo.c create mode 100644 drivers/staging/fwserial/dma_fifo.h create mode 100644 drivers/staging/fwserial/fwserial.c create mode 100644 drivers/staging/fwserial/fwserial.h diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index f245fd3153d0..fc95eaba223b 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -146,4 +146,6 @@ source "drivers/staging/dgrp/Kconfig" source "drivers/staging/sb105x/Kconfig" +source "drivers/staging/fwserial/Kconfig" + endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 94cc3fa5ef81..76db1e242747 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -65,3 +65,4 @@ obj-$(CONFIG_CED1401) += ced1401/ obj-$(CONFIG_DRM_IMX) += imx-drm/ obj-$(CONFIG_DGRP) += dgrp/ obj-$(CONFIG_SB105X) += sb105x/ +obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/ diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig new file mode 100644 index 000000000000..580406cb1808 --- /dev/null +++ b/drivers/staging/fwserial/Kconfig @@ -0,0 +1,9 @@ +config FIREWIRE_SERIAL + tristate "TTY over Firewire" + depends on FIREWIRE + help + This enables TTY over IEEE 1394, providing high-speed serial + connectivity to cabled peers. + + To compile this driver as a module, say M here: the module will + be called firewire-serial. diff --git a/drivers/staging/fwserial/Makefile b/drivers/staging/fwserial/Makefile new file mode 100644 index 000000000000..2170869a19b1 --- /dev/null +++ b/drivers/staging/fwserial/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_FIREWIRE_SERIAL) += firewire-serial.o +firewire-serial-objs := fwserial.o dma_fifo.o diff --git a/drivers/staging/fwserial/TODO b/drivers/staging/fwserial/TODO new file mode 100644 index 000000000000..726900548eae --- /dev/null +++ b/drivers/staging/fwserial/TODO @@ -0,0 +1,37 @@ +TODOs +----- +1. Implement retries for RCODE_BUSY, RCODE_NO_ACK and RCODE_SEND_ERROR + - I/O is handled asynchronously which presents some issues when error + conditions occur. +2. Implement _robust_ console on top of this. The existing prototype console + driver is not ready for the big leagues yet. +3. Expose means of controlling attach/detach of peers via sysfs. Include + GUID-to-port matching/whitelist/blacklist. + +-- Issues with firewire stack -- +1. This driver uses the same unregistered vendor id that the firewire core does + (0xd00d1e). Perhaps this could be exposed as a define in + firewire-constants.h? +2. MAX_ASYNC_PAYLOAD needs to be publicly exposed by core/ohci + - otherwise how will this driver know the max size of address window to + open for one packet write? +3. Maybe device_max_receive() and link_speed_to_max_payload() should be + taken up by the firewire core? +4. To avoid dropping rx data while still limiting the maximum buffering, + the size of the AR context must be known. How to expose this to drivers? +5. Explore if bigger AR context will reduce RCODE_BUSY responses + (or auto-grow to certain max size -- but this would require major surgery + as the current AR is contiguously mapped) + +-- Issues with TTY core -- + 1. Hack for alternate device name scheme + - because udev no longer allows device renaming, devices should have + their proper names on creation. This is an issue for creating the + fwloop device with the fwtty devices because although duplicating + roughly the same operations as tty_port_register_device() isn't difficult, + access to the tty_class & tty_fops is restricted in scope. + + This is currently being worked around in create_loop_device() by + extracting the tty_class ptr and tty_fops ptr from the previously created + tty devices. Perhaps an add'l api can be added -- eg., + tty_{port_}register_named_device(). diff --git a/drivers/staging/fwserial/dma_fifo.c b/drivers/staging/fwserial/dma_fifo.c new file mode 100644 index 000000000000..72aa0533f018 --- /dev/null +++ b/drivers/staging/fwserial/dma_fifo.c @@ -0,0 +1,310 @@ +/* + * DMA-able FIFO implementation + * + * Copyright (C) 2012 Peter Hurley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include + +#include "dma_fifo.h" + +#ifdef DEBUG_TRACING +#define df_trace(s, args...) pr_debug(s, ##args) +#else +#define df_trace(s, args...) +#endif + +#define FAIL(fifo, condition, format...) ({ \ + fifo->corrupt = !!(condition); \ + if (unlikely(fifo->corrupt)) { \ + __WARN_printf(format); \ + } \ + unlikely(fifo->corrupt); \ +}) + +/* + * private helper fn to determine if check is in open interval (lo,hi) + */ +static bool addr_check(unsigned check, unsigned lo, unsigned hi) +{ + return check - (lo + 1) < (hi - 1) - lo; +} + +/** + * dma_fifo_init: initialize the fifo to a valid but inoperative state + * @fifo: address of in-place "struct dma_fifo" object + */ +void dma_fifo_init(struct dma_fifo *fifo) +{ + memset(fifo, 0, sizeof(*fifo)); + INIT_LIST_HEAD(&fifo->pending); +} + +/** + * dma_fifo_alloc - initialize and allocate dma_fifo + * @fifo: address of in-place "struct dma_fifo" object + * @size: 'apparent' size, in bytes, of fifo + * @align: dma alignment to maintain (should be at least cpu cache alignment), + * must be power of 2 + * @tx_limit: maximum # of bytes transmissable per dma (rounded down to + * multiple of alignment, but at least align size) + * @open_limit: maximum # of outstanding dma transactions allowed + * @gfp_mask: get_free_pages mask, passed to kmalloc() + * + * The 'apparent' size will be rounded up to next greater aligned size. + * Returns 0 if no error, otherwise an error code + */ +int dma_fifo_alloc(struct dma_fifo *fifo, int size, unsigned align, + int tx_limit, int open_limit, gfp_t gfp_mask) +{ + int capacity; + + if (!is_power_of_2(align) || size < 0) + return -EINVAL; + + size = round_up(size, align); + capacity = size + align * open_limit + align * DMA_FIFO_GUARD; + fifo->data = kmalloc(capacity, gfp_mask); + if (!fifo->data) + return -ENOMEM; + + fifo->in = 0; + fifo->out = 0; + fifo->done = 0; + fifo->size = size; + fifo->avail = size; + fifo->align = align; + fifo->tx_limit = max_t(int, round_down(tx_limit, align), align); + fifo->open = 0; + fifo->open_limit = open_limit; + fifo->guard = size + align * open_limit; + fifo->capacity = capacity; + fifo->corrupt = 0; + + return 0; +} + +/** + * dma_fifo_free - frees the fifo + * @fifo: address of in-place "struct dma_fifo" to free + * + * Also reinits the fifo to a valid but inoperative state. This + * allows the fifo to be reused with a different target requiring + * different fifo parameters. + */ +void dma_fifo_free(struct dma_fifo *fifo) +{ + struct dma_pending *pending, *next; + + if (fifo->data == NULL) + return; + + list_for_each_entry_safe(pending, next, &fifo->pending, link) + list_del_init(&pending->link); + kfree(fifo->data); + fifo->data = NULL; +} + +/** + * dma_fifo_reset - dumps the fifo contents and reinits for reuse + * @fifo: address of in-place "struct dma_fifo" to reset + */ +void dma_fifo_reset(struct dma_fifo *fifo) +{ + struct dma_pending *pending, *next; + + if (fifo->data == NULL) + return; + + list_for_each_entry_safe(pending, next, &fifo->pending, link) + list_del_init(&pending->link); + fifo->in = 0; + fifo->out = 0; + fifo->done = 0; + fifo->avail = fifo->size; + fifo->open = 0; + fifo->corrupt = 0; +} + +/** + * dma_fifo_in - copies data into the fifo + * @fifo: address of in-place "struct dma_fifo" to write to + * @src: buffer to copy from + * @n: # of bytes to copy + * + * Returns the # of bytes actually copied, which can be less than requested if + * the fifo becomes full. If < 0, return is error code. + */ +int dma_fifo_in(struct dma_fifo *fifo, const void *src, int n) +{ + int ofs, l; + + if (fifo->data == NULL) + return -ENOENT; + if (fifo->corrupt) + return -ENXIO; + + if (n > fifo->avail) + n = fifo->avail; + if (n <= 0) + return 0; + + ofs = fifo->in % fifo->capacity; + l = min(n, fifo->capacity - ofs); + memcpy(fifo->data + ofs, src, l); + memcpy(fifo->data, src + l, n - l); + + if (FAIL(fifo, addr_check(fifo->done, fifo->in, fifo->in + n) || + fifo->avail < n, + "fifo corrupt: in:%u out:%u done:%u n:%d avail:%d", + fifo->in, fifo->out, fifo->done, n, fifo->avail)) + return -ENXIO; + + fifo->in += n; + fifo->avail -= n; + + df_trace("in:%u out:%u done:%u n:%d avail:%d", fifo->in, fifo->out, + fifo->done, n, fifo->avail); + + return n; +} + +/** + * dma_fifo_out_pend - gets address/len of next avail read and marks as pended + * @fifo: address of in-place "struct dma_fifo" to read from + * @pended: address of structure to fill with read address/len + * The data/len fields will be NULL/0 if no dma is pended. + * + * Returns the # of used bytes remaining in fifo (ie, if > 0, more data + * remains in the fifo that was not pended). If < 0, return is error code. + */ +int dma_fifo_out_pend(struct dma_fifo *fifo, struct dma_pending *pended) +{ + unsigned len, n, ofs, l, limit; + + if (fifo->data == NULL) + return -ENOENT; + if (fifo->corrupt) + return -ENXIO; + + pended->len = 0; + pended->data = NULL; + pended->out = fifo->out; + + len = fifo->in - fifo->out; + if (!len) + return -ENODATA; + if (fifo->open == fifo->open_limit) + return -EAGAIN; + + n = len; + ofs = fifo->out % fifo->capacity; + l = fifo->capacity - ofs; + limit = min_t(unsigned, l, fifo->tx_limit); + if (n > limit) { + n = limit; + fifo->out += limit; + } else if (ofs + n > fifo->guard) { + fifo->out += l; + fifo->in = fifo->out; + } else { + fifo->out += round_up(n, fifo->align); + fifo->in = fifo->out; + } + + df_trace("in: %u out: %u done: %u n: %d len: %u avail: %d", fifo->in, + fifo->out, fifo->done, n, len, fifo->avail); + + pended->len = n; + pended->data = fifo->data + ofs; + pended->next = fifo->out; + list_add_tail(&pended->link, &fifo->pending); + ++fifo->open; + + if (FAIL(fifo, fifo->open > fifo->open_limit, + "past open limit:%d (limit:%d)", + fifo->open, fifo->open_limit)) + return -ENXIO; + if (FAIL(fifo, fifo->out & (fifo->align - 1), + "fifo out unaligned:%u (align:%u)", + fifo->out, fifo->align)) + return -ENXIO; + + return len - n; +} + +/** + * dma_fifo_out_complete - marks pended dma as completed + * @fifo: address of in-place "struct dma_fifo" which was read from + * @complete: address of structure for previously pended dma to mark completed + */ +int dma_fifo_out_complete(struct dma_fifo *fifo, struct dma_pending *complete) +{ + struct dma_pending *pending, *next, *tmp; + + if (fifo->data == NULL) + return -ENOENT; + if (fifo->corrupt) + return -ENXIO; + if (list_empty(&fifo->pending) && fifo->open == 0) + return -EINVAL; + + if (FAIL(fifo, list_empty(&fifo->pending) != (fifo->open == 0), + "pending list disagrees with open count:%d", + fifo->open)) + return -ENXIO; + + tmp = complete->data; + *tmp = *complete; + list_replace(&complete->link, &tmp->link); + dp_mark_completed(tmp); + + /* Only update the fifo in the original pended order */ + list_for_each_entry_safe(pending, next, &fifo->pending, link) { + if (!dp_is_completed(pending)) { + df_trace("still pending: saved out: %u len: %d", + pending->out, pending->len); + break; + } + + if (FAIL(fifo, pending->out != fifo->done || + addr_check(fifo->in, fifo->done, pending->next), + "in:%u out:%u done:%u saved:%u next:%u", + fifo->in, fifo->out, fifo->done, pending->out, + pending->next)) + return -ENXIO; + + list_del_init(&pending->link); + fifo->done = pending->next; + fifo->avail += pending->len; + --fifo->open; + + df_trace("in: %u out: %u done: %u len: %u avail: %d", fifo->in, + fifo->out, fifo->done, pending->len, fifo->avail); + } + + if (FAIL(fifo, fifo->open < 0, "open dma:%d < 0", fifo->open)) + return -ENXIO; + if (FAIL(fifo, fifo->avail > fifo->size, "fifo avail:%d > size:%d", + fifo->avail, fifo->size)) + return -ENXIO; + + return 0; +} diff --git a/drivers/staging/fwserial/dma_fifo.h b/drivers/staging/fwserial/dma_fifo.h new file mode 100644 index 000000000000..a113fe1e6f19 --- /dev/null +++ b/drivers/staging/fwserial/dma_fifo.h @@ -0,0 +1,130 @@ +/* + * DMA-able FIFO interface + * + * Copyright (C) 2012 Peter Hurley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DMA_FIFO_H_ +#define _DMA_FIFO_H_ + +/** + * The design basis for the DMA FIFO is to provide an output side that + * complies with the streaming DMA API design that can be DMA'd from directly + * (without additional copying), coupled with an input side that maintains a + * logically consistent 'apparent' size (ie, bytes in + bytes avail is static + * for the lifetime of the FIFO). + * + * DMA output transactions originate on a cache line boundary and can be + * variably-sized. DMA output transactions can be retired out-of-order but + * the FIFO will only advance the output in the original input sequence. + * This means the FIFO will eventually stall if a transaction is never retired. + * + * Chunking the output side into cache line multiples means that some FIFO + * memory is unused. For example, if all the avail input has been pended out, + * then the in and out markers are re-aligned to the next cache line. + * The maximum possible waste is + * (cache line alignment - 1) * (max outstanding dma transactions) + * This potential waste requires additional hidden capacity within the FIFO + * to be able to accept input while the 'apparent' size has not been reached. + * + * Additional cache lines (ie, guard area) are used to minimize DMA + * fragmentation when wrapping at the end of the FIFO. Input is allowed into the + * guard area, but the in and out FIFO markers are wrapped when DMA is pended. + */ + +#define DMA_FIFO_GUARD 3 /* # of cache lines to reserve for the guard area */ + +struct dma_fifo { + unsigned in; + unsigned out; /* updated when dma is pended */ + unsigned done; /* updated upon dma completion */ + struct { + unsigned corrupt:1; + }; + int size; /* 'apparent' size of fifo */ + int guard; /* ofs of guard area */ + int capacity; /* size + reserved */ + int avail; /* # of unused bytes in fifo */ + unsigned align; /* must be power of 2 */ + int tx_limit; /* max # of bytes per dma transaction */ + int open_limit; /* max # of outstanding allowed */ + int open; /* # of outstanding dma transactions */ + struct list_head pending; /* fifo markers for outstanding dma */ + void *data; +}; + +struct dma_pending { + struct list_head link; + void *data; + unsigned len; + unsigned next; + unsigned out; +}; + +static inline void dp_mark_completed(struct dma_pending *dp) +{ + dp->data += 1; +} + +static inline bool dp_is_completed(struct dma_pending *dp) +{ + return (unsigned long)dp->data & 1UL; +} + +extern void dma_fifo_init(struct dma_fifo *fifo); +extern int dma_fifo_alloc(struct dma_fifo *fifo, int size, unsigned align, + int tx_limit, int open_limit, gfp_t gfp_mask); +extern void dma_fifo_free(struct dma_fifo *fifo); +extern void dma_fifo_reset(struct dma_fifo *fifo); +extern int dma_fifo_in(struct dma_fifo *fifo, const void *src, int n); +extern int dma_fifo_out_pend(struct dma_fifo *fifo, struct dma_pending *pended); +extern int dma_fifo_out_complete(struct dma_fifo *fifo, + struct dma_pending *complete); + +/* returns the # of used bytes in the fifo */ +static inline int dma_fifo_level(struct dma_fifo *fifo) +{ + return fifo->size - fifo->avail; +} + +/* returns the # of bytes ready for output in the fifo */ +static inline int dma_fifo_out_level(struct dma_fifo *fifo) +{ + return fifo->in - fifo->out; +} + +/* returns the # of unused bytes in the fifo */ +static inline int dma_fifo_avail(struct dma_fifo *fifo) +{ + return fifo->avail; +} + +/* returns true if fifo has max # of outstanding dmas */ +static inline bool dma_fifo_busy(struct dma_fifo *fifo) +{ + return fifo->open == fifo->open_limit; +} + +/* changes the max size of dma returned from dma_fifo_out_pend() */ +static inline int dma_fifo_change_tx_limit(struct dma_fifo *fifo, int tx_limit) +{ + tx_limit = round_down(tx_limit, fifo->align); + fifo->tx_limit = max_t(int, tx_limit, fifo->align); + return 0; +} + +#endif /* _DMA_FIFO_H_ */ diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c new file mode 100644 index 000000000000..5d4d64a3ea81 --- /dev/null +++ b/drivers/staging/fwserial/fwserial.c @@ -0,0 +1,2946 @@ +/* + * FireWire Serial driver + * + * Copyright (C) 2012 Peter Hurley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fwserial.h" + +#define be32_to_u64(hi, lo) ((u64)be32_to_cpu(hi) << 32 | be32_to_cpu(lo)) + +#define LINUX_VENDOR_ID 0xd00d1eU /* same id used in card root directory */ +#define FWSERIAL_VERSION 0x00e81cU /* must be unique within LINUX_VENDOR_ID */ + +/* configurable options */ +static int num_ttys = 4; /* # of std ttys to create per fw_card */ + /* - doubles as loopback port index */ +static bool auto_connect = true; /* try to VIRT_CABLE to every peer */ +static bool create_loop_dev = true; /* create a loopback device for each card */ +bool limit_bw; /* limit async bandwidth to 20% of max */ + +module_param_named(ttys, num_ttys, int, S_IRUGO | S_IWUSR); +module_param_named(auto, auto_connect, bool, S_IRUGO | S_IWUSR); +module_param_named(loop, create_loop_dev, bool, S_IRUGO | S_IWUSR); +module_param(limit_bw, bool, S_IRUGO | S_IWUSR); + +/* + * Threshold below which the tty is woken for writing + * - should be equal to WAKEUP_CHARS in drivers/tty/n_tty.c because + * even if the writer is woken, n_tty_poll() won't set POLLOUT until + * our fifo is below this level + */ +#define WAKEUP_CHARS 256 + +/** + * fwserial_list: list of every fw_serial created for each fw_card + * See discussion in fwserial_probe. + */ +static LIST_HEAD(fwserial_list); +static DEFINE_MUTEX(fwserial_list_mutex); + +/** + * port_table: array of tty ports allocated to each fw_card + * + * tty ports are allocated during probe when an fw_serial is first + * created for a given fw_card. Ports are allocated in a contiguous block, + * each block consisting of 'num_ports' ports. + */ +static struct fwtty_port *port_table[MAX_TOTAL_PORTS]; +static DEFINE_MUTEX(port_table_lock); +static bool port_table_corrupt; +#define FWTTY_INVALID_INDEX MAX_TOTAL_PORTS + +/* total # of tty ports created per fw_card */ +static int num_ports; + +/* slab used as pool for struct fwtty_transactions */ +static struct kmem_cache *fwtty_txn_cache; + +struct fwtty_transaction; +typedef void (*fwtty_transaction_cb)(struct fw_card *card, int rcode, + void *data, size_t length, + struct fwtty_transaction *txn); + +struct fwtty_transaction { + struct fw_transaction fw_txn; + fwtty_transaction_cb callback; + struct fwtty_port *port; + union { + struct dma_pending dma_pended; + }; +}; + +#define to_device(a, b) (a->b) +#define fwtty_err(p, s, v...) dev_err(to_device(p, device), s, ##v) +#define fwtty_info(p, s, v...) dev_info(to_device(p, device), s, ##v) +#define fwtty_notice(p, s, v...) dev_notice(to_device(p, device), s, ##v) +#define fwtty_dbg(p, s, v...) \ + dev_dbg(to_device(p, device), "%s: " s, __func__, ##v) +#define fwtty_err_ratelimited(p, s, v...) \ + dev_err_ratelimited(to_device(p, device), s, ##v) + +#ifdef DEBUG +static inline void debug_short_write(struct fwtty_port *port, int c, int n) +{ + int avail; + + if (n < c) { + spin_lock_bh(&port->lock); + avail = dma_fifo_avail(&port->tx_fifo); + spin_unlock_bh(&port->lock); + fwtty_dbg(port, "short write: avail:%d req:%d wrote:%d", + avail, c, n); + } +} +#else +#define debug_short_write(port, c, n) +#endif + +static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card, + int generation, int id); + +#ifdef FWTTY_PROFILING + +static void profile_fifo_avail(struct fwtty_port *port, unsigned *stat) +{ + spin_lock_bh(&port->lock); + profile_size_distrib(stat, dma_fifo_avail(&port->tx_fifo)); + spin_unlock_bh(&port->lock); +} + +static void dump_profile(struct seq_file *m, struct stats *stats) +{ + /* for each stat, print sum of 0 to 2^k, then individually */ + int k = 4; + unsigned sum; + int j; + char t[10]; + + snprintf(t, 10, "< %d", 1 << k); + seq_printf(m, "\n%14s %6s", " ", t); + for (j = k + 1; j < DISTRIBUTION_MAX_INDEX; ++j) + seq_printf(m, "%6d", 1 << j); + + ++k; + for (j = 0, sum = 0; j <= k; ++j) + sum += stats->reads[j]; + seq_printf(m, "\n%14s: %6d", "reads", sum); + for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) + seq_printf(m, "%6d", stats->reads[j]); + + for (j = 0, sum = 0; j <= k; ++j) + sum += stats->writes[j]; + seq_printf(m, "\n%14s: %6d", "writes", sum); + for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) + seq_printf(m, "%6d", stats->writes[j]); + + for (j = 0, sum = 0; j <= k; ++j) + sum += stats->txns[j]; + seq_printf(m, "\n%14s: %6d", "txns", sum); + for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) + seq_printf(m, "%6d", stats->txns[j]); + + for (j = 0, sum = 0; j <= k; ++j) + sum += stats->unthrottle[j]; + seq_printf(m, "\n%14s: %6d", "avail @ unthr", sum); + for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j) + seq_printf(m, "%6d", stats->unthrottle[j]); +} + +#else +#define profile_fifo_avail(port, stat) +#define dump_profile(m, stats) +#endif + +/* Returns the max receive packet size for the given card */ +static inline int device_max_receive(struct fw_device *fw_device) +{ + return 1 << (clamp_t(int, fw_device->max_rec, 8U, 13U) + 1); +} + +static void fwtty_log_tx_error(struct fwtty_port *port, int rcode) +{ + switch (rcode) { + case RCODE_SEND_ERROR: + fwtty_err_ratelimited(port, "card busy"); + break; + case RCODE_ADDRESS_ERROR: + fwtty_err_ratelimited(port, "bad unit addr or write length"); + break; + case RCODE_DATA_ERROR: + fwtty_err_ratelimited(port, "failed rx"); + break; + case RCODE_NO_ACK: + fwtty_err_ratelimited(port, "missing ack"); + break; + case RCODE_BUSY: + fwtty_err_ratelimited(port, "remote busy"); + break; + default: + fwtty_err_ratelimited(port, "failed tx: %d", rcode); + } +} + +static void fwtty_txn_constructor(void *this) +{ + struct fwtty_transaction *txn = this; + + init_timer(&txn->fw_txn.split_timeout_timer); +} + +static void fwtty_common_callback(struct fw_card *card, int rcode, + void *payload, size_t len, void *cb_data) +{ + struct fwtty_transaction *txn = cb_data; + struct fwtty_port *port = txn->port; + + if (port && rcode != RCODE_COMPLETE) + fwtty_log_tx_error(port, rcode); + if (txn->callback) + txn->callback(card, rcode, payload, len, txn); + kmem_cache_free(fwtty_txn_cache, txn); +} + +static int fwtty_send_data_async(struct fwtty_peer *peer, int tcode, + unsigned long long addr, void *payload, + size_t len, fwtty_transaction_cb callback, + struct fwtty_port *port) +{ + struct fwtty_transaction *txn; + int generation; + + txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC); + if (!txn) + return -ENOMEM; + + txn->callback = callback; + txn->port = port; + + generation = peer->generation; + smp_rmb(); + fw_send_request(peer->serial->card, &txn->fw_txn, tcode, + peer->node_id, generation, peer->speed, addr, payload, + len, fwtty_common_callback, txn); + return 0; +} + +static void fwtty_send_txn_async(struct fwtty_peer *peer, + struct fwtty_transaction *txn, int tcode, + unsigned long long addr, void *payload, + size_t len, fwtty_transaction_cb callback, + struct fwtty_port *port) +{ + int generation; + + txn->callback = callback; + txn->port = port; + + generation = peer->generation; + smp_rmb(); + fw_send_request(peer->serial->card, &txn->fw_txn, tcode, + peer->node_id, generation, peer->speed, addr, payload, + len, fwtty_common_callback, txn); +} + + +static void __fwtty_restart_tx(struct fwtty_port *port) +{ + int len, avail; + + len = dma_fifo_out_level(&port->tx_fifo); + if (len) + schedule_delayed_work(&port->drain, 0); + avail = dma_fifo_avail(&port->tx_fifo); + + fwtty_dbg(port, "fifo len: %d avail: %d", len, avail); +} + +static void fwtty_restart_tx(struct fwtty_port *port) +{ + spin_lock_bh(&port->lock); + __fwtty_restart_tx(port); + spin_unlock_bh(&port->lock); +} + +/** + * fwtty_update_port_status - decodes & dispatches line status changes + * + * Note: in loopback, the port->lock is being held. Only use functions that + * don't attempt to reclaim the port->lock. + */ +static void fwtty_update_port_status(struct fwtty_port *port, unsigned status) +{ + unsigned delta; + struct tty_struct *tty; + + /* simulated LSR/MSR status from remote */ + status &= ~MCTRL_MASK; + delta = (port->mstatus ^ status) & ~MCTRL_MASK; + delta &= ~(status & TIOCM_RNG); + port->mstatus = status; + + if (delta & TIOCM_RNG) + ++port->icount.rng; + if (delta & TIOCM_DSR) + ++port->icount.dsr; + if (delta & TIOCM_CAR) + ++port->icount.dcd; + if (delta & TIOCM_CTS) + ++port->icount.cts; + + fwtty_dbg(port, "status: %x delta: %x", status, delta); + + if (delta & TIOCM_CAR) { + tty = tty_port_tty_get(&port->port); + if (tty && !C_CLOCAL(tty)) { + if (status & TIOCM_CAR) + wake_up_interruptible(&port->port.open_wait); + else + schedule_work(&port->hangup); + } + tty_kref_put(tty); + } + + if (delta & TIOCM_CTS) { + tty = tty_port_tty_get(&port->port); + if (tty && C_CRTSCTS(tty)) { + if (tty->hw_stopped) { + if (status & TIOCM_CTS) { + tty->hw_stopped = 0; + if (port->loopback) + __fwtty_restart_tx(port); + else + fwtty_restart_tx(port); + } + } else { + if (~status & TIOCM_CTS) + tty->hw_stopped = 1; + } + } + tty_kref_put(tty); + + } else if (delta & OOB_TX_THROTTLE) { + tty = tty_port_tty_get(&port->port); + if (tty) { + if (tty->hw_stopped) { + if (~status & OOB_TX_THROTTLE) { + tty->hw_stopped = 0; + if (port->loopback) + __fwtty_restart_tx(port); + else + fwtty_restart_tx(port); + } + } else { + if (status & OOB_TX_THROTTLE) + tty->hw_stopped = 1; + } + } + tty_kref_put(tty); + } + + if (delta & (UART_LSR_BI << 24)) { + if (status & (UART_LSR_BI << 24)) { + port->break_last = jiffies; + schedule_delayed_work(&port->emit_breaks, 0); + } else { + /* run emit_breaks one last time (if pending) */ + mod_delayed_work(system_wq, &port->emit_breaks, 0); + } + } + + if (delta & (TIOCM_DSR | TIOCM_CAR | TIOCM_CTS | TIOCM_RNG)) + wake_up_interruptible(&port->port.delta_msr_wait); +} + +/** + * __fwtty_port_line_status - generate 'line status' for indicated port + * + * This function returns a remote 'MSR' state based on the local 'MCR' state, + * as if a null modem cable was attached. The actual status is a mangling + * of TIOCM_* bits suitable for sending to a peer's status_addr. + * + * Note: caller must be holding port lock + */ +static unsigned __fwtty_port_line_status(struct fwtty_port *port) +{ + unsigned status = 0; + + /* TODO: add module param to tie RNG to DTR as well */ + + if (port->mctrl & TIOCM_DTR) + status |= TIOCM_DSR | TIOCM_CAR; + if (port->mctrl & TIOCM_RTS) + status |= TIOCM_CTS; + if (port->mctrl & OOB_RX_THROTTLE) + status |= OOB_TX_THROTTLE; + /* emulate BRK as add'l line status */ + if (port->break_ctl) + status |= UART_LSR_BI << 24; + + return status; +} + +/** + * __fwtty_write_port_status - send the port line status to peer + * + * Note: caller must be holding the port lock. + */ +static int __fwtty_write_port_status(struct fwtty_port *port) +{ + struct fwtty_peer *peer; + int err = -ENOENT; + unsigned status = __fwtty_port_line_status(port); + + rcu_read_lock(); + peer = rcu_dereference(port->peer); + if (peer) { + err = fwtty_send_data_async(peer, TCODE_WRITE_QUADLET_REQUEST, + peer->status_addr, &status, + sizeof(status), NULL, port); + } + rcu_read_unlock(); + + return err; +} + +/** + * fwtty_write_port_status - same as above but locked by port lock + */ +static int fwtty_write_port_status(struct fwtty_port *port) +{ + int err; + + spin_lock_bh(&port->lock); + err = __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); + return err; +} + +static void __fwtty_throttle(struct fwtty_port *port, struct tty_struct *tty) +{ + unsigned old; + + old = port->mctrl; + port->mctrl |= OOB_RX_THROTTLE; + if (C_CRTSCTS(tty)) + port->mctrl &= ~TIOCM_RTS; + if (~old & OOB_RX_THROTTLE) + __fwtty_write_port_status(port); +} + +/** + * fwtty_do_hangup - wait for ldisc to deliver all pending rx; only then hangup + * + * When the remote has finished tx, and all in-flight rx has been received and + * and pushed to the flip buffer, the remote may close its device. This will + * drop DTR on the remote which will drop carrier here. Typically, the tty is + * hung up when carrier is dropped or lost. + * + * However, there is a race between the hang up and the line discipline + * delivering its data to the reader. A hangup will cause the ldisc to flush + * (ie., clear) the read buffer and flip buffer. Because of firewire's + * relatively high throughput, the ldisc frequently lags well behind the driver, + * resulting in lost data (which has already been received and written to + * the flip buffer) when the remote closes its end. + * + * Unfortunately, since the flip buffer offers no direct method for determining + * if it holds data, ensuring the ldisc has delivered all data is problematic. + */ + +/* FIXME: drop this workaround when __tty_hangup waits for ldisc completion */ +static void fwtty_do_hangup(struct work_struct *work) +{ + struct fwtty_port *port = to_port(work, hangup); + struct tty_struct *tty; + + schedule_timeout_uninterruptible(msecs_to_jiffies(50)); + + tty = tty_port_tty_get(&port->port); + if (tty) + tty_vhangup(tty); + tty_kref_put(tty); +} + + +static void fwtty_emit_breaks(struct work_struct *work) +{ + struct fwtty_port *port = to_port(to_delayed_work(work), emit_breaks); + struct tty_struct *tty; + static const char buf[16]; + unsigned long now = jiffies; + unsigned long elapsed = now - port->break_last; + int n, t, c, brk = 0; + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + + /* generate breaks at the line rate (but at least 1) */ + n = (elapsed * port->cps) / HZ + 1; + port->break_last = now; + + fwtty_dbg(port, "sending %d brks", n); + + while (n) { + t = min(n, 16); + c = tty_insert_flip_string_fixed_flag(tty, buf, TTY_BREAK, t); + n -= c; + brk += c; + if (c < t) + break; + } + tty_flip_buffer_push(tty); + + tty_kref_put(tty); + + if (port->mstatus & (UART_LSR_BI << 24)) + schedule_delayed_work(&port->emit_breaks, FREQ_BREAKS); + port->icount.brk += brk; +} + +static void fwtty_pushrx(struct work_struct *work) +{ + struct fwtty_port *port = to_port(work, push); + struct tty_struct *tty; + struct buffered_rx *buf, *next; + int n, c = 0; + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + + spin_lock_bh(&port->lock); + list_for_each_entry_safe(buf, next, &port->buf_list, list) { + n = tty_insert_flip_string_fixed_flag(tty, buf->data, + TTY_NORMAL, buf->n); + c += n; + port->buffered -= n; + if (n < buf->n) { + if (n > 0) { + memmove(buf->data, buf->data + n, buf->n - n); + buf->n -= n; + } + __fwtty_throttle(port, tty); + break; + } else { + list_del(&buf->list); + kfree(buf); + } + } + if (c > 0) + tty_flip_buffer_push(tty); + + if (list_empty(&port->buf_list)) + clear_bit(BUFFERING_RX, &port->flags); + spin_unlock_bh(&port->lock); + + tty_kref_put(tty); +} + +static int fwtty_buffer_rx(struct fwtty_port *port, unsigned char *d, size_t n) +{ + struct buffered_rx *buf; + size_t size = (n + sizeof(struct buffered_rx) + 0xFF) & ~0xFF; + + if (port->buffered + n > HIGH_WATERMARK) + return 0; + buf = kmalloc(size, GFP_ATOMIC); + if (!buf) + return 0; + INIT_LIST_HEAD(&buf->list); + buf->n = n; + memcpy(buf->data, d, n); + + spin_lock_bh(&port->lock); + list_add_tail(&buf->list, &port->buf_list); + port->buffered += n; + if (port->buffered > port->stats.watermark) + port->stats.watermark = port->buffered; + set_bit(BUFFERING_RX, &port->flags); + spin_unlock_bh(&port->lock); + + return n; +} + +static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len) +{ + struct tty_struct *tty; + int c, n = len; + unsigned lsr; + int err = 0; + + tty = tty_port_tty_get(&port->port); + if (!tty) + return -ENOENT; + + fwtty_dbg(port, "%d", n); + profile_size_distrib(port->stats.reads, n); + + if (port->write_only) { + n = 0; + goto out; + } + + /* disregard break status; breaks are generated by emit_breaks work */ + lsr = (port->mstatus >> 24) & ~UART_LSR_BI; + + if (port->overrun) + lsr |= UART_LSR_OE; + + if (lsr & UART_LSR_OE) + ++port->icount.overrun; + + lsr &= port->status_mask; + if (lsr & ~port->ignore_mask & UART_LSR_OE) { + if (!tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { + err = -EIO; + goto out; + } + } + port->overrun = false; + + if (lsr & port->ignore_mask & ~UART_LSR_OE) { + /* TODO: don't drop SAK and Magic SysRq here */ + n = 0; + goto out; + } + + if (!test_bit(BUFFERING_RX, &port->flags)) { + c = tty_insert_flip_string_fixed_flag(tty, data, TTY_NORMAL, n); + if (c > 0) + tty_flip_buffer_push(tty); + n -= c; + + if (n) { + /* start buffering and throttling */ + n -= fwtty_buffer_rx(port, &data[c], n); + + spin_lock_bh(&port->lock); + __fwtty_throttle(port, tty); + spin_unlock_bh(&port->lock); + } + } else + n -= fwtty_buffer_rx(port, data, n); + + if (n) { + port->overrun = true; + err = -EIO; + } + +out: + tty_kref_put(tty); + + port->icount.rx += len; + port->stats.lost += n; + return err; +} + +/** + * fwtty_port_handler - bus address handler for port reads/writes + * @parameters: fw_address_callback_t as specified by firewire core interface + * + * This handler is responsible for handling inbound read/write dma from remotes. + */ +static void fwtty_port_handler(struct fw_card *card, + struct fw_request *request, + int tcode, int destination, int source, + int generation, + unsigned long long addr, + void *data, size_t len, + void *callback_data) +{ + struct fwtty_port *port = callback_data; + struct fwtty_peer *peer; + int err; + int rcode; + + /* Only accept rx from the peer virtual-cabled to this port */ + rcu_read_lock(); + peer = __fwserial_peer_by_node_id(card, generation, source); + rcu_read_unlock(); + if (!peer || peer != rcu_access_pointer(port->peer)) { + rcode = RCODE_ADDRESS_ERROR; + fwtty_err_ratelimited(port, "ignoring unauthenticated data"); + goto respond; + } + + switch (tcode) { + case TCODE_WRITE_QUADLET_REQUEST: + if (addr != port->rx_handler.offset || len != 4) + rcode = RCODE_ADDRESS_ERROR; + else { + fwtty_update_port_status(port, *(unsigned *)data); + rcode = RCODE_COMPLETE; + } + break; + + case TCODE_WRITE_BLOCK_REQUEST: + if (addr != port->rx_handler.offset + 4 || + len > port->rx_handler.length - 4) { + rcode = RCODE_ADDRESS_ERROR; + } else { + err = fwtty_rx(port, data, len); + switch (err) { + case 0: + rcode = RCODE_COMPLETE; + break; + case -EIO: + rcode = RCODE_DATA_ERROR; + break; + default: + rcode = RCODE_CONFLICT_ERROR; + break; + } + } + break; + + default: + rcode = RCODE_TYPE_ERROR; + } + +respond: + fw_send_response(card, request, rcode); +} + +/** + * fwtty_tx_complete - callback for tx dma + * @data: ignored, has no meaning for write txns + * @length: ignored, has no meaning for write txns + * + * The writer must be woken here if the fifo has been emptied because it + * may have slept if chars_in_buffer was != 0 + */ +static void fwtty_tx_complete(struct fw_card *card, int rcode, + void *data, size_t length, + struct fwtty_transaction *txn) +{ + struct fwtty_port *port = txn->port; + struct tty_struct *tty; + int len; + + fwtty_dbg(port, "rcode: %d", rcode); + + switch (rcode) { + case RCODE_COMPLETE: + spin_lock_bh(&port->lock); + dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended); + len = dma_fifo_level(&port->tx_fifo); + spin_unlock_bh(&port->lock); + + port->icount.tx += txn->dma_pended.len; + break; + + default: + /* TODO: implement retries */ + spin_lock_bh(&port->lock); + dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended); + len = dma_fifo_level(&port->tx_fifo); + spin_unlock_bh(&port->lock); + + port->stats.dropped += txn->dma_pended.len; + } + + if (len < WAKEUP_CHARS) { + tty = tty_port_tty_get(&port->port); + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } + } +} + +static int fwtty_tx(struct fwtty_port *port, bool drain) +{ + struct fwtty_peer *peer; + struct fwtty_transaction *txn; + struct tty_struct *tty; + int n, len; + + tty = tty_port_tty_get(&port->port); + if (!tty) + return -ENOENT; + + rcu_read_lock(); + peer = rcu_dereference(port->peer); + if (!peer) { + n = -EIO; + goto out; + } + + if (test_and_set_bit(IN_TX, &port->flags)) { + n = -EALREADY; + goto out; + } + + /* try to write as many dma transactions out as possible */ + n = -EAGAIN; + while (!tty->stopped && !tty->hw_stopped && + !test_bit(STOP_TX, &port->flags)) { + txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC); + if (!txn) { + n = -ENOMEM; + break; + } + + spin_lock_bh(&port->lock); + n = dma_fifo_out_pend(&port->tx_fifo, &txn->dma_pended); + spin_unlock_bh(&port->lock); + + fwtty_dbg(port, "out: %u rem: %d", txn->dma_pended.len, n); + + if (n < 0) { + kmem_cache_free(fwtty_txn_cache, txn); + if (n == -EAGAIN) + ++port->stats.tx_stall; + else if (n == -ENODATA) + profile_size_distrib(port->stats.txns, 0); + else { + ++port->stats.fifo_errs; + fwtty_err_ratelimited(port, "fifo err: %d", n); + } + break; + } + + profile_size_distrib(port->stats.txns, txn->dma_pended.len); + + fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST, + peer->fifo_addr, txn->dma_pended.data, + txn->dma_pended.len, fwtty_tx_complete, + port); + ++port->stats.sent; + + /* + * Stop tx if the 'last view' of the fifo is empty or if + * this is the writer and there's not enough data to bother + */ + if (n == 0 || (!drain && n < WRITER_MINIMUM)) + break; + } + + if (n >= 0 || n == -EAGAIN || n == -ENOMEM || n == -ENODATA) { + spin_lock_bh(&port->lock); + len = dma_fifo_out_level(&port->tx_fifo); + if (len) { + unsigned long delay = (n == -ENOMEM) ? HZ : 1; + schedule_delayed_work(&port->drain, delay); + } + len = dma_fifo_level(&port->tx_fifo); + spin_unlock_bh(&port->lock); + + /* wakeup the writer */ + if (drain && len < WAKEUP_CHARS) + tty_wakeup(tty); + } + + clear_bit(IN_TX, &port->flags); + wake_up_interruptible(&port->wait_tx); + +out: + rcu_read_unlock(); + tty_kref_put(tty); + return n; +} + +static void fwtty_drain_tx(struct work_struct *work) +{ + struct fwtty_port *port = to_port(to_delayed_work(work), drain); + + fwtty_tx(port, true); +} + +static void fwtty_write_xchar(struct fwtty_port *port, char ch) +{ + struct fwtty_peer *peer; + + ++port->stats.xchars; + + fwtty_dbg(port, "%02x", ch); + + rcu_read_lock(); + peer = rcu_dereference(port->peer); + if (peer) { + fwtty_send_data_async(peer, TCODE_WRITE_BLOCK_REQUEST, + peer->fifo_addr, &ch, sizeof(ch), + NULL, port); + } + rcu_read_unlock(); +} + +struct fwtty_port *fwtty_port_get(unsigned index) +{ + struct fwtty_port *port; + + if (index >= MAX_TOTAL_PORTS) + return NULL; + + mutex_lock(&port_table_lock); + port = port_table[index]; + if (port) + kref_get(&port->serial->kref); + mutex_unlock(&port_table_lock); + return port; +} +EXPORT_SYMBOL(fwtty_port_get); + +static int fwtty_ports_add(struct fw_serial *serial) +{ + int err = -EBUSY; + int i, j; + + if (port_table_corrupt) + return err; + + mutex_lock(&port_table_lock); + for (i = 0; i + num_ports <= MAX_TOTAL_PORTS; i += num_ports) { + if (!port_table[i]) { + for (j = 0; j < num_ports; ++i, ++j) { + serial->ports[j]->index = i; + port_table[i] = serial->ports[j]; + } + err = 0; + break; + } + } + mutex_unlock(&port_table_lock); + return err; +} + +static void fwserial_destroy(struct kref *kref) +{ + struct fw_serial *serial = to_serial(kref, kref); + struct fwtty_port **ports = serial->ports; + int j, i = ports[0]->index; + + synchronize_rcu(); + + mutex_lock(&port_table_lock); + for (j = 0; j < num_ports; ++i, ++j) { + static bool once; + int corrupt = port_table[i] != ports[j]; + if (corrupt && !once) { + WARN(corrupt, "port_table[%d]: %p != ports[%d]: %p", + i, port_table[i], j, ports[j]); + once = true; + port_table_corrupt = true; + } + + port_table[i] = NULL; + } + mutex_unlock(&port_table_lock); + + for (j = 0; j < num_ports; ++j) { + fw_core_remove_address_handler(&ports[j]->rx_handler); + dma_fifo_free(&ports[j]->tx_fifo); + kfree(ports[j]); + } + kfree(serial); +} + +void fwtty_port_put(struct fwtty_port *port) +{ + kref_put(&port->serial->kref, fwserial_destroy); +} +EXPORT_SYMBOL(fwtty_port_put); + +static void fwtty_port_dtr_rts(struct tty_port *tty_port, int on) +{ + struct fwtty_port *port = to_port(tty_port, port); + + fwtty_dbg(port, "on/off: %d", on); + + spin_lock_bh(&port->lock); + /* Don't change carrier state if this is a console */ + if (!port->port.console) { + if (on) + port->mctrl |= TIOCM_DTR | TIOCM_RTS; + else + port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS); + } + + __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); +} + +/** + * fwtty_port_carrier_raised: required tty_port operation + * + * This port operation is polled after a tty has been opened and is waiting for + * carrier detect -- see drivers/tty/tty_port:tty_port_block_til_ready(). + */ +static int fwtty_port_carrier_raised(struct tty_port *tty_port) +{ + struct fwtty_port *port = to_port(tty_port, port); + int rc; + + rc = (port->mstatus & TIOCM_CAR); + + fwtty_dbg(port, "%d", rc); + + return rc; +} + +static unsigned set_termios(struct fwtty_port *port, struct tty_struct *tty) +{ + unsigned baud, frame; + + baud = tty_termios_baud_rate(&tty->termios); + tty_termios_encode_baud_rate(&tty->termios, baud, baud); + + /* compute bit count of 2 frames */ + frame = 12 + ((C_CSTOPB(tty)) ? 4 : 2) + ((C_PARENB(tty)) ? 2 : 0); + + switch (C_CSIZE(tty)) { + case CS5: + frame -= (C_CSTOPB(tty)) ? 1 : 0; + break; + case CS6: + frame += 2; + break; + case CS7: + frame += 4; + break; + case CS8: + frame += 6; + break; + } + + port->cps = (baud << 1) / frame; + + port->status_mask = UART_LSR_OE; + if (_I_FLAG(tty, BRKINT | PARMRK)) + port->status_mask |= UART_LSR_BI; + + port->ignore_mask = 0; + if (I_IGNBRK(tty)) { + port->ignore_mask |= UART_LSR_BI; + if (I_IGNPAR(tty)) + port->ignore_mask |= UART_LSR_OE; + } + + port->write_only = !C_CREAD(tty); + + /* turn off echo and newline xlat if loopback */ + if (port->loopback) { + tty->termios.c_lflag &= ~(ECHO | ECHOE | ECHOK | ECHOKE | + ECHONL | ECHOPRT | ECHOCTL); + tty->termios.c_oflag &= ~ONLCR; + } + + return baud; +} + +static int fwtty_port_activate(struct tty_port *tty_port, + struct tty_struct *tty) +{ + struct fwtty_port *port = to_port(tty_port, port); + unsigned baud; + int err; + + set_bit(TTY_IO_ERROR, &tty->flags); + + err = dma_fifo_alloc(&port->tx_fifo, FWTTY_PORT_TXFIFO_LEN, + cache_line_size(), + port->max_payload, + FWTTY_PORT_MAX_PEND_DMA, + GFP_KERNEL); + if (err) + return err; + + spin_lock_bh(&port->lock); + + baud = set_termios(port, tty); + + /* if console, don't change carrier state */ + if (!port->port.console) { + port->mctrl = 0; + if (baud != 0) + port->mctrl = TIOCM_DTR | TIOCM_RTS; + } + + if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) + tty->hw_stopped = 1; + + __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); + + clear_bit(TTY_IO_ERROR, &tty->flags); + + return 0; +} + +/** + * fwtty_port_shutdown + * + * Note: the tty port core ensures this is not the console and + * manages TTY_IO_ERROR properly + */ +static void fwtty_port_shutdown(struct tty_port *tty_port) +{ + struct fwtty_port *port = to_port(tty_port, port); + struct buffered_rx *buf, *next; + + /* TODO: cancel outstanding transactions */ + + cancel_delayed_work_sync(&port->emit_breaks); + cancel_delayed_work_sync(&port->drain); + cancel_work_sync(&port->push); + + spin_lock_bh(&port->lock); + list_for_each_entry_safe(buf, next, &port->buf_list, list) { + list_del(&buf->list); + kfree(buf); + } + port->buffered = 0; + port->flags = 0; + port->break_ctl = 0; + port->overrun = 0; + __fwtty_write_port_status(port); + dma_fifo_free(&port->tx_fifo); + spin_unlock_bh(&port->lock); +} + +static int fwtty_open(struct tty_struct *tty, struct file *fp) +{ + struct fwtty_port *port = tty->driver_data; + + return tty_port_open(&port->port, tty, fp); +} + +static void fwtty_close(struct tty_struct *tty, struct file *fp) +{ + struct fwtty_port *port = tty->driver_data; + + tty_port_close(&port->port, tty, fp); +} + +static void fwtty_hangup(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + + tty_port_hangup(&port->port); +} + +static void fwtty_cleanup(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + + tty->driver_data = NULL; + fwtty_port_put(port); +} + +static int fwtty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct fwtty_port *port = fwtty_port_get(tty->index); + int err; + + err = tty_standard_install(driver, tty); + if (!err) + tty->driver_data = port; + else + fwtty_port_put(port); + return err; +} + +static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c) +{ + struct fwtty_port *port = tty->driver_data; + int n, len; + + fwtty_dbg(port, "%d", c); + profile_size_distrib(port->stats.writes, c); + + spin_lock_bh(&port->lock); + n = dma_fifo_in(&port->tx_fifo, buf, c); + len = dma_fifo_out_level(&port->tx_fifo); + if (len < DRAIN_THRESHOLD) + schedule_delayed_work(&port->drain, 1); + spin_unlock_bh(&port->lock); + + if (len >= DRAIN_THRESHOLD) + fwtty_tx(port, false); + + debug_short_write(port, c, n); + + return (n < 0) ? 0 : n; +} + +static int fwtty_write_room(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + int n; + + spin_lock_bh(&port->lock); + n = dma_fifo_avail(&port->tx_fifo); + spin_unlock_bh(&port->lock); + + fwtty_dbg(port, "%d", n); + + return n; +} + +static int fwtty_chars_in_buffer(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + int n; + + spin_lock_bh(&port->lock); + n = dma_fifo_level(&port->tx_fifo); + spin_unlock_bh(&port->lock); + + fwtty_dbg(port, "%d", n); + + return n; +} + +static void fwtty_send_xchar(struct tty_struct *tty, char ch) +{ + struct fwtty_port *port = tty->driver_data; + + fwtty_dbg(port, "%02x", ch); + + fwtty_write_xchar(port, ch); +} + +static void fwtty_throttle(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + + /* + * Ignore throttling (but not unthrottling). + * It only makes sense to throttle when data will no longer be + * accepted by the tty flip buffer. For example, it is + * possible for received data to overflow the tty buffer long + * before the line discipline ever has a chance to throttle the driver. + * Additionally, the driver may have already completed the I/O + * but the tty buffer is still emptying, so the line discipline is + * throttling and unthrottling nothing. + */ + + ++port->stats.throttled; +} + +static void fwtty_unthrottle(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + + fwtty_dbg(port, "CRTSCTS: %d", (C_CRTSCTS(tty) != 0)); + + profile_fifo_avail(port, port->stats.unthrottle); + + schedule_work(&port->push); + + spin_lock_bh(&port->lock); + port->mctrl &= ~OOB_RX_THROTTLE; + if (C_CRTSCTS(tty)) + port->mctrl |= TIOCM_RTS; + __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); +} + +static int check_msr_delta(struct fwtty_port *port, unsigned long mask, + struct async_icount *prev) +{ + struct async_icount now; + int delta; + + now = port->icount; + + delta = ((mask & TIOCM_RNG && prev->rng != now.rng) || + (mask & TIOCM_DSR && prev->dsr != now.dsr) || + (mask & TIOCM_CAR && prev->dcd != now.dcd) || + (mask & TIOCM_CTS && prev->cts != now.cts)); + + *prev = now; + + return delta; +} + +static int wait_msr_change(struct fwtty_port *port, unsigned long mask) +{ + struct async_icount prev; + + prev = port->icount; + + return wait_event_interruptible(port->port.delta_msr_wait, + check_msr_delta(port, mask, &prev)); +} + +static int get_serial_info(struct fwtty_port *port, + struct serial_struct __user *info) +{ + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_UNKNOWN; + tmp.line = port->port.tty->index; + tmp.flags = port->port.flags; + tmp.xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN; + tmp.baud_base = 400000000; + tmp.close_delay = port->port.close_delay; + + return (copy_to_user(info, &tmp, sizeof(*info))) ? -EFAULT : 0; +} + +static int set_serial_info(struct fwtty_port *port, + struct serial_struct __user *info) +{ + struct serial_struct tmp; + + if (copy_from_user(&tmp, info, sizeof(tmp))) + return -EFAULT; + + if (tmp.irq != 0 || tmp.port != 0 || tmp.custom_divisor != 0 || + tmp.baud_base != 400000000) + return -EPERM; + + if (!capable(CAP_SYS_ADMIN)) { + if (((tmp.flags & ~ASYNC_USR_MASK) != + (port->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + } else + port->port.close_delay = tmp.close_delay * HZ / 100; + + return 0; +} + +static int fwtty_ioctl(struct tty_struct *tty, unsigned cmd, + unsigned long arg) +{ + struct fwtty_port *port = tty->driver_data; + int err; + + switch (cmd) { + case TIOCGSERIAL: + mutex_lock(&port->port.mutex); + err = get_serial_info(port, (void __user *)arg); + mutex_unlock(&port->port.mutex); + break; + + case TIOCSSERIAL: + mutex_lock(&port->port.mutex); + err = set_serial_info(port, (void __user *)arg); + mutex_unlock(&port->port.mutex); + break; + + case TIOCMIWAIT: + err = wait_msr_change(port, arg); + break; + + default: + err = -ENOIOCTLCMD; + } + + return err; +} + +static void fwtty_set_termios(struct tty_struct *tty, struct ktermios *old) +{ + struct fwtty_port *port = tty->driver_data; + unsigned baud; + + spin_lock_bh(&port->lock); + baud = set_termios(port, tty); + + if ((baud == 0) && (old->c_cflag & CBAUD)) + port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS); + else if ((baud != 0) && !(old->c_cflag & CBAUD)) { + if (C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags)) + port->mctrl |= TIOCM_DTR | TIOCM_RTS; + else + port->mctrl |= TIOCM_DTR; + } + __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); + + if (old->c_cflag & CRTSCTS) { + if (!C_CRTSCTS(tty)) { + tty->hw_stopped = 0; + fwtty_restart_tx(port); + } + } else if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) { + tty->hw_stopped = 1; + } +} + +/** + * fwtty_break_ctl - start/stop sending breaks + * + * Signals the remote to start or stop generating simulated breaks. + * First, stop dequeueing from the fifo and wait for writer/drain to leave tx + * before signalling the break line status. This guarantees any pending rx will + * be queued to the line discipline before break is simulated on the remote. + * Conversely, turning off break_ctl requires signalling the line status change, + * then enabling tx. + */ +static int fwtty_break_ctl(struct tty_struct *tty, int state) +{ + struct fwtty_port *port = tty->driver_data; + long ret; + + fwtty_dbg(port, "%d", state); + + if (state == -1) { + set_bit(STOP_TX, &port->flags); + ret = wait_event_interruptible_timeout(port->wait_tx, + !test_bit(IN_TX, &port->flags), + 10); + if (ret == 0 || ret == -ERESTARTSYS) { + clear_bit(STOP_TX, &port->flags); + fwtty_restart_tx(port); + return -EINTR; + } + } + + spin_lock_bh(&port->lock); + port->break_ctl = (state == -1); + __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); + + if (state == 0) { + spin_lock_bh(&port->lock); + dma_fifo_reset(&port->tx_fifo); + clear_bit(STOP_TX, &port->flags); + spin_unlock_bh(&port->lock); + } + return 0; +} + +static int fwtty_tiocmget(struct tty_struct *tty) +{ + struct fwtty_port *port = tty->driver_data; + unsigned tiocm; + + spin_lock_bh(&port->lock); + tiocm = (port->mctrl & MCTRL_MASK) | (port->mstatus & ~MCTRL_MASK); + spin_unlock_bh(&port->lock); + + fwtty_dbg(port, "%x", tiocm); + + return tiocm; +} + +static int fwtty_tiocmset(struct tty_struct *tty, unsigned set, unsigned clear) +{ + struct fwtty_port *port = tty->driver_data; + + fwtty_dbg(port, "set: %x clear: %x", set, clear); + + /* TODO: simulate loopback if TIOCM_LOOP set */ + + spin_lock_bh(&port->lock); + port->mctrl &= ~(clear & MCTRL_MASK & 0xffff); + port->mctrl |= set & MCTRL_MASK & 0xffff; + __fwtty_write_port_status(port); + spin_unlock_bh(&port->lock); + return 0; +} + +static int fwtty_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct fwtty_port *port = tty->driver_data; + struct stats stats; + + memcpy(&stats, &port->stats, sizeof(stats)); + if (port->port.console) + (*port->fwcon_ops->stats)(&stats, port->con_data); + + icount->cts = port->icount.cts; + icount->dsr = port->icount.dsr; + icount->rng = port->icount.rng; + icount->dcd = port->icount.dcd; + icount->rx = port->icount.rx; + icount->tx = port->icount.tx + stats.xchars; + icount->frame = port->icount.frame; + icount->overrun = port->icount.overrun; + icount->parity = port->icount.parity; + icount->brk = port->icount.brk; + icount->buf_overrun = port->icount.overrun; + return 0; +} + +static void fwtty_proc_show_port(struct seq_file *m, struct fwtty_port *port) +{ + struct stats stats; + + memcpy(&stats, &port->stats, sizeof(stats)); + if (port->port.console) + (*port->fwcon_ops->stats)(&stats, port->con_data); + + seq_printf(m, " tx:%d rx:%d", port->icount.tx + stats.xchars, + port->icount.rx); + seq_printf(m, " cts:%d dsr:%d rng:%d dcd:%d", port->icount.cts, + port->icount.dsr, port->icount.rng, port->icount.dcd); + seq_printf(m, " fe:%d oe:%d pe:%d brk:%d", port->icount.frame, + port->icount.overrun, port->icount.parity, port->icount.brk); + seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped, + stats.tx_stall, stats.fifo_errs, stats.lost); + seq_printf(m, " pkts:%d thr:%d wtrmk:%d", stats.sent, stats.throttled, + stats.watermark); + seq_printf(m, " addr:%012llx", port->rx_handler.offset); + + if (port->port.console) { + seq_printf(m, "\n "); + (*port->fwcon_ops->proc_show)(m, port->con_data); + } + + dump_profile(m, &port->stats); +} + +static void fwtty_proc_show_peer(struct seq_file *m, struct fwtty_peer *peer) +{ + int generation = peer->generation; + + smp_rmb(); + seq_printf(m, " %s:", dev_name(&peer->unit->device)); + seq_printf(m, " node:%04x gen:%d", peer->node_id, generation); + seq_printf(m, " sp:%d max:%d guid:%016llx", peer->speed, + peer->max_payload, (unsigned long long) peer->guid); + + if (capable(CAP_SYS_ADMIN)) { + seq_printf(m, " mgmt:%012llx", + (unsigned long long) peer->mgmt_addr); + seq_printf(m, " addr:%012llx", + (unsigned long long) peer->status_addr); + } + seq_putc(m, '\n'); +} + +static int fwtty_proc_show(struct seq_file *m, void *v) +{ + struct fwtty_port *port; + struct fw_serial *serial; + struct fwtty_peer *peer; + int i; + + seq_puts(m, "fwserinfo: 1.0 driver: 1.0\n"); + for (i = 0; i < MAX_TOTAL_PORTS && (port = fwtty_port_get(i)); ++i) { + seq_printf(m, "%2d:", i); + if (capable(CAP_SYS_ADMIN)) + fwtty_proc_show_port(m, port); + fwtty_port_put(port); + seq_printf(m, "\n"); + } + seq_putc(m, '\n'); + + rcu_read_lock(); + list_for_each_entry_rcu(serial, &fwserial_list, list) { + seq_printf(m, "card: %s guid: %016llx\n", + dev_name(serial->card->device), + (unsigned long long) serial->card->guid); + list_for_each_entry_rcu(peer, &serial->peer_list, list) + fwtty_proc_show_peer(m, peer); + } + rcu_read_unlock(); + return 0; +} + +static int fwtty_proc_open(struct inode *inode, struct file *fp) +{ + return single_open(fp, fwtty_proc_show, NULL); +} + +static const struct file_operations fwtty_proc_fops = { + .owner = THIS_MODULE, + .open = fwtty_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct tty_port_operations fwtty_port_ops = { + .dtr_rts = fwtty_port_dtr_rts, + .carrier_raised = fwtty_port_carrier_raised, + .shutdown = fwtty_port_shutdown, + .activate = fwtty_port_activate, +}; + +static const struct tty_operations fwtty_ops = { + .open = fwtty_open, + .close = fwtty_close, + .hangup = fwtty_hangup, + .cleanup = fwtty_cleanup, + .install = fwtty_install, + .write = fwtty_write, + .write_room = fwtty_write_room, + .chars_in_buffer = fwtty_chars_in_buffer, + .send_xchar = fwtty_send_xchar, + .throttle = fwtty_throttle, + .unthrottle = fwtty_unthrottle, + .ioctl = fwtty_ioctl, + .set_termios = fwtty_set_termios, + .break_ctl = fwtty_break_ctl, + .tiocmget = fwtty_tiocmget, + .tiocmset = fwtty_tiocmset, + .get_icount = fwtty_get_icount, + .proc_fops = &fwtty_proc_fops, +}; + +static inline int mgmt_pkt_expected_len(__be16 code) +{ + static const struct fwserial_mgmt_pkt pkt; + + switch (be16_to_cpu(code)) { + case FWSC_VIRT_CABLE_PLUG: + return sizeof(pkt.hdr) + sizeof(pkt.plug_req); + + case FWSC_VIRT_CABLE_PLUG_RSP: /* | FWSC_RSP_OK */ + return sizeof(pkt.hdr) + sizeof(pkt.plug_rsp); + + + case FWSC_VIRT_CABLE_UNPLUG: + case FWSC_VIRT_CABLE_UNPLUG_RSP: + case FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK: + case FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK: + return sizeof(pkt.hdr); + + default: + return -1; + } +} + +static inline void fill_plug_params(struct virt_plug_params *params, + struct fwtty_port *port) +{ + u64 status_addr = port->rx_handler.offset; + u64 fifo_addr = port->rx_handler.offset + 4; + size_t fifo_len = port->rx_handler.length - 4; + + params->status_hi = cpu_to_be32(status_addr >> 32); + params->status_lo = cpu_to_be32(status_addr); + params->fifo_hi = cpu_to_be32(fifo_addr >> 32); + params->fifo_lo = cpu_to_be32(fifo_addr); + params->fifo_len = cpu_to_be32(fifo_len); +} + +static inline void fill_plug_req(struct fwserial_mgmt_pkt *pkt, + struct fwtty_port *port) +{ + pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG); + pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); + fill_plug_params(&pkt->plug_req, port); +} + +static inline void fill_plug_rsp_ok(struct fwserial_mgmt_pkt *pkt, + struct fwtty_port *port) +{ + pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP); + pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); + fill_plug_params(&pkt->plug_rsp, port); +} + +static inline void fill_plug_rsp_nack(struct fwserial_mgmt_pkt *pkt) +{ + pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK); + pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); +} + +static inline void fill_unplug_req(struct fwserial_mgmt_pkt *pkt) +{ + pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG); + pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); +} + +static inline void fill_unplug_rsp_nack(struct fwserial_mgmt_pkt *pkt) +{ + pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK); + pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); +} + +static inline void fill_unplug_rsp_ok(struct fwserial_mgmt_pkt *pkt) +{ + pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP); + pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code)); +} + +static void fwserial_virt_plug_complete(struct fwtty_peer *peer, + struct virt_plug_params *params) +{ + struct fwtty_port *port = peer->port; + + peer->status_addr = be32_to_u64(params->status_hi, params->status_lo); + peer->fifo_addr = be32_to_u64(params->fifo_hi, params->fifo_lo); + peer->fifo_len = be32_to_cpu(params->fifo_len); + peer_set_state(peer, FWPS_ATTACHED); + + /* reconfigure tx_fifo optimally for this peer */ + spin_lock_bh(&port->lock); + port->max_payload = min3(peer->max_payload, peer->fifo_len, + MAX_ASYNC_PAYLOAD); + dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload); + spin_unlock_bh(&peer->port->lock); + + if (port->port.console && port->fwcon_ops->notify != NULL) + (*port->fwcon_ops->notify)(FWCON_NOTIFY_ATTACH, port->con_data); + + fwtty_info(&peer->unit, "peer (guid:%016llx) connected on %s", + (unsigned long long)peer->guid, dev_name(port->device)); +} + +static inline int fwserial_send_mgmt_sync(struct fwtty_peer *peer, + struct fwserial_mgmt_pkt *pkt) +{ + int generation; + int rcode, tries = 5; + + do { + generation = peer->generation; + smp_rmb(); + + rcode = fw_run_transaction(peer->serial->card, + TCODE_WRITE_BLOCK_REQUEST, + peer->node_id, + generation, peer->speed, + peer->mgmt_addr, + pkt, be16_to_cpu(pkt->hdr.len)); + if (rcode == RCODE_BUSY || rcode == RCODE_SEND_ERROR || + rcode == RCODE_GENERATION) { + fwtty_dbg(&peer->unit, "mgmt write error: %d", rcode); + continue; + } else + break; + } while (--tries > 0); + return rcode; +} + +/** + * fwserial_claim_port - attempt to claim port @ index for peer + * + * Returns ptr to claimed port or error code (as ERR_PTR()) + * Can sleep - must be called from process context + */ +static struct fwtty_port *fwserial_claim_port(struct fwtty_peer *peer, + int index) +{ + struct fwtty_port *port; + + if (index < 0 || index >= num_ports) + return ERR_PTR(-EINVAL); + + /* must guarantee that previous port releases have completed */ + synchronize_rcu(); + + port = peer->serial->ports[index]; + spin_lock_bh(&port->lock); + if (!rcu_access_pointer(port->peer)) + rcu_assign_pointer(port->peer, peer); + else + port = ERR_PTR(-EBUSY); + spin_unlock_bh(&port->lock); + + return port; +} + +/** + * fwserial_find_port - find avail port and claim for peer + * + * Returns ptr to claimed port or NULL if none avail + * Can sleep - must be called from process context + */ +static struct fwtty_port *fwserial_find_port(struct fwtty_peer *peer) +{ + struct fwtty_port **ports = peer->serial->ports; + int i; + + /* must guarantee that previous port releases have completed */ + synchronize_rcu(); + + /* TODO: implement optional GUID-to-specific port # matching */ + + /* find an unattached port (but not the loopback port, if present) */ + for (i = 0; i < num_ttys; ++i) { + spin_lock_bh(&ports[i]->lock); + if (!ports[i]->peer) { + /* claim port */ + rcu_assign_pointer(ports[i]->peer, peer); + spin_unlock_bh(&ports[i]->lock); + return ports[i]; + } + spin_unlock_bh(&ports[i]->lock); + } + return NULL; +} + +static void fwserial_release_port(struct fwtty_port *port) +{ + /* drop carrier (and all other line status) */ + fwtty_update_port_status(port, 0); + + spin_lock_bh(&port->lock); + + /* reset dma fifo max transmission size back to S100 */ + port->max_payload = link_speed_to_max_payload(SCODE_100); + dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload); + + rcu_assign_pointer(port->peer, NULL); + spin_unlock_bh(&port->lock); + + if (port->port.console && port->fwcon_ops->notify != NULL) + (*port->fwcon_ops->notify)(FWCON_NOTIFY_DETACH, port->con_data); +} + +static void fwserial_plug_timeout(unsigned long data) +{ + struct fwtty_peer *peer = (struct fwtty_peer *) data; + struct fwtty_port *port; + + spin_lock_bh(&peer->lock); + if (peer->state != FWPS_PLUG_PENDING) { + spin_unlock_bh(&peer->lock); + return; + } + + port = peer_revert_state(peer); + spin_unlock_bh(&peer->lock); + + if (port) + fwserial_release_port(port); +} + +/** + * fwserial_connect_peer - initiate virtual cable with peer + * + * Returns 0 if VIRT_CABLE_PLUG request was successfully sent, + * otherwise error code. Must be called from process context. + */ +static int fwserial_connect_peer(struct fwtty_peer *peer) +{ + struct fwtty_port *port; + struct fwserial_mgmt_pkt *pkt; + int err, rcode; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) + return -ENOMEM; + + port = fwserial_find_port(peer); + if (!port) { + fwtty_err(&peer->unit, "avail ports in use"); + err = -EBUSY; + goto free_pkt; + } + + spin_lock_bh(&peer->lock); + + /* only initiate VIRT_CABLE_PLUG if peer is currently not attached */ + if (peer->state != FWPS_NOT_ATTACHED) { + err = -EBUSY; + goto release_port; + } + + peer->port = port; + peer_set_state(peer, FWPS_PLUG_PENDING); + + fill_plug_req(pkt, peer->port); + + setup_timer(&peer->timer, fwserial_plug_timeout, (unsigned long)peer); + mod_timer(&peer->timer, jiffies + VIRT_CABLE_PLUG_TIMEOUT); + spin_unlock_bh(&peer->lock); + + rcode = fwserial_send_mgmt_sync(peer, pkt); + + spin_lock_bh(&peer->lock); + if (peer->state == FWPS_PLUG_PENDING && rcode != RCODE_COMPLETE) { + if (rcode == RCODE_CONFLICT_ERROR) + err = -EAGAIN; + else + err = -EIO; + goto cancel_timer; + } + spin_unlock_bh(&peer->lock); + + kfree(pkt); + return 0; + +cancel_timer: + del_timer(&peer->timer); + peer_revert_state(peer); +release_port: + spin_unlock_bh(&peer->lock); + fwserial_release_port(port); +free_pkt: + kfree(pkt); + return err; +} + +/** + * fwserial_close_port - + * HUP the tty (if the tty exists) and unregister the tty device. + * Only used by the unit driver upon unit removal to disconnect and + * cleanup all attached ports + * + * The port reference is put by fwtty_cleanup (if a reference was + * ever taken). + */ +static void fwserial_close_port(struct fwtty_port *port) +{ + struct tty_struct *tty; + + mutex_lock(&port->port.mutex); + tty = tty_port_tty_get(&port->port); + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } + mutex_unlock(&port->port.mutex); + + tty_unregister_device(fwtty_driver, port->index); +} + +/** + * fwserial_lookup - finds first fw_serial associated with card + * @card: fw_card to match + * + * NB: caller must be holding fwserial_list_mutex + */ +static struct fw_serial *fwserial_lookup(struct fw_card *card) +{ + struct fw_serial *serial; + + list_for_each_entry(serial, &fwserial_list, list) { + if (card == serial->card) + return serial; + } + + return NULL; +} + +/** + * __fwserial_lookup_rcu - finds first fw_serial associated with card + * @card: fw_card to match + * + * NB: caller must be inside rcu_read_lock() section + */ +static struct fw_serial *__fwserial_lookup_rcu(struct fw_card *card) +{ + struct fw_serial *serial; + + list_for_each_entry_rcu(serial, &fwserial_list, list) { + if (card == serial->card) + return serial; + } + + return NULL; +} + +/** + * __fwserial_peer_by_node_id - finds a peer matching the given generation + id + * + * If a matching peer could not be found for the specified generation/node id, + * this could be because: + * a) the generation has changed and one of the nodes hasn't updated yet + * b) the remote node has created its remote unit device before this + * local node has created its corresponding remote unit device + * In either case, the remote node should retry + * + * Note: caller must be in rcu_read_lock() section + */ +static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card, + int generation, int id) +{ + struct fw_serial *serial; + struct fwtty_peer *peer; + + serial = __fwserial_lookup_rcu(card); + if (!serial) { + /* + * Something is very wrong - there should be a matching + * fw_serial structure for every fw_card. Maybe the remote node + * has created its remote unit device before this driver has + * been probed for any unit devices... + */ + fwtty_err(card, "unknown card (guid %016llx)", + (unsigned long long) card->guid); + return NULL; + } + + list_for_each_entry_rcu(peer, &serial->peer_list, list) { + int g = peer->generation; + smp_rmb(); + if (generation == g && id == peer->node_id) + return peer; + } + + return NULL; +} + +#ifdef DEBUG +static void __dump_peer_list(struct fw_card *card) +{ + struct fw_serial *serial; + struct fwtty_peer *peer; + + serial = __fwserial_lookup_rcu(card); + if (!serial) + return; + + list_for_each_entry_rcu(peer, &serial->peer_list, list) { + int g = peer->generation; + smp_rmb(); + fwtty_dbg(card, "peer(%d:%x) guid: %016llx\n", g, + peer->node_id, (unsigned long long) peer->guid); + } +} +#else +#define __dump_peer_list(s) +#endif + +static void fwserial_auto_connect(struct work_struct *work) +{ + struct fwtty_peer *peer = to_peer(to_delayed_work(work), connect); + int err; + + err = fwserial_connect_peer(peer); + if (err == -EAGAIN && ++peer->connect_retries < MAX_CONNECT_RETRIES) + schedule_delayed_work(&peer->connect, CONNECT_RETRY_DELAY); +} + +/** + * fwserial_add_peer - add a newly probed 'serial' unit device as a 'peer' + * @serial: aggregate representing the specific fw_card to add the peer to + * @unit: 'peer' to create and add to peer_list of serial + * + * Adds a 'peer' (ie, a local or remote 'serial' unit device) to the list of + * peers for a specific fw_card. Optionally, auto-attach this peer to an + * available tty port. This function is called either directly or indirectly + * as a result of a 'serial' unit device being created & probed. + * + * Note: this function is serialized with fwserial_remove_peer() by the + * fwserial_list_mutex held in fwserial_probe(). + * + * A 1:1 correspondence between an fw_unit and an fwtty_peer is maintained + * via the dev_set_drvdata() for the device of the fw_unit. + */ +static int fwserial_add_peer(struct fw_serial *serial, struct fw_unit *unit) +{ + struct device *dev = &unit->device; + struct fw_device *parent = fw_parent_device(unit); + struct fwtty_peer *peer; + struct fw_csr_iterator ci; + int key, val; + int generation; + + peer = kzalloc(sizeof(*peer), GFP_KERNEL); + if (!peer) + return -ENOMEM; + + peer_set_state(peer, FWPS_NOT_ATTACHED); + + dev_set_drvdata(dev, peer); + peer->unit = unit; + peer->guid = (u64)parent->config_rom[3] << 32 | parent->config_rom[4]; + peer->speed = parent->max_speed; + peer->max_payload = min(device_max_receive(parent), + link_speed_to_max_payload(peer->speed)); + + generation = parent->generation; + smp_rmb(); + peer->node_id = parent->node_id; + smp_wmb(); + peer->generation = generation; + + /* retrieve the mgmt bus addr from the unit directory */ + fw_csr_iterator_init(&ci, unit->directory); + while (fw_csr_iterator_next(&ci, &key, &val)) { + if (key == (CSR_OFFSET | CSR_DEPENDENT_INFO)) { + peer->mgmt_addr = CSR_REGISTER_BASE + 4 * val; + break; + } + } + if (peer->mgmt_addr == 0ULL) { + /* + * No mgmt address effectively disables VIRT_CABLE_PLUG - + * this peer will not be able to attach to a remote + */ + peer_set_state(peer, FWPS_NO_MGMT_ADDR); + } + + spin_lock_init(&peer->lock); + peer->port = NULL; + + init_timer(&peer->timer); + INIT_WORK(&peer->work, NULL); + INIT_DELAYED_WORK(&peer->connect, fwserial_auto_connect); + + /* associate peer with specific fw_card */ + peer->serial = serial; + list_add_rcu(&peer->list, &serial->peer_list); + + fwtty_info(&peer->unit, "peer added (guid:%016llx)", + (unsigned long long)peer->guid); + + /* identify the local unit & virt cable to loopback port */ + if (parent->is_local) { + serial->self = peer; + if (create_loop_dev) { + struct fwtty_port *port; + port = fwserial_claim_port(peer, num_ttys); + if (!IS_ERR(port)) { + struct virt_plug_params params; + + spin_lock_bh(&peer->lock); + peer->port = port; + fill_plug_params(¶ms, port); + fwserial_virt_plug_complete(peer, ¶ms); + spin_unlock_bh(&peer->lock); + + fwtty_write_port_status(port); + } + } + + } else if (auto_connect) { + /* auto-attach to remote units only (if policy allows) */ + schedule_delayed_work(&peer->connect, 1); + } + + return 0; +} + +/** + * fwserial_remove_peer - remove a 'serial' unit device as a 'peer' + * + * Remove a 'peer' from its list of peers. This function is only + * called by fwserial_remove() on bus removal of the unit device. + * + * Note: this function is serialized with fwserial_add_peer() by the + * fwserial_list_mutex held in fwserial_remove(). + */ +static void fwserial_remove_peer(struct fwtty_peer *peer) +{ + struct fwtty_port *port; + + spin_lock_bh(&peer->lock); + peer_set_state(peer, FWPS_GONE); + spin_unlock_bh(&peer->lock); + + cancel_delayed_work_sync(&peer->connect); + cancel_work_sync(&peer->work); + + spin_lock_bh(&peer->lock); + /* if this unit is the local unit, clear link */ + if (peer == peer->serial->self) + peer->serial->self = NULL; + + /* cancel the request timeout timer (if running) */ + del_timer(&peer->timer); + + port = peer->port; + peer->port = NULL; + + list_del_rcu(&peer->list); + + fwtty_info(&peer->unit, "peer removed (guid:%016llx)", + (unsigned long long)peer->guid); + + spin_unlock_bh(&peer->lock); + + if (port) + fwserial_release_port(port); + + synchronize_rcu(); + kfree(peer); +} + +/** + * create_loop_device - create a loopback tty device + * @tty_driver: tty_driver to own loopback device + * @prototype: ptr to already-assigned 'prototype' tty port + * @index: index to associate this device with the tty port + * @parent: device to child to + * + * HACK - this is basically tty_port_register_device() with an + * alternate naming scheme. Suggest tty_port_register_named_device() + * helper api. + * + * Creates a loopback tty device named 'fwloop' which is attached to + * the local unit in fwserial_add_peer(). Note that in the device + * name advances in increments of port allocation blocks, ie., for port + * indices 0..3, the device name will be 'fwloop0'; for 4..7, 'fwloop1', + * and so on. + * + * Only one loopback device should be created per fw_card. + */ +static void release_loop_device(struct device *dev) +{ + kfree(dev); +} + +static struct device *create_loop_device(struct tty_driver *driver, + struct fwtty_port *prototype, + struct fwtty_port *port, + struct device *parent) +{ + char name[64]; + int index = port->index; + dev_t devt = MKDEV(driver->major, driver->minor_start) + index; + struct device *dev = NULL; + int err; + + if (index >= fwtty_driver->num) + return ERR_PTR(-EINVAL); + + snprintf(name, 64, "%s%d", loop_dev_name, index / num_ports); + + tty_port_link_device(&port->port, driver, index); + + cdev_init(&driver->cdevs[index], driver->cdevs[prototype->index].ops); + driver->cdevs[index].owner = driver->owner; + err = cdev_add(&driver->cdevs[index], devt, 1); + if (err) + return ERR_PTR(err); + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + cdev_del(&driver->cdevs[index]); + return ERR_PTR(-ENOMEM); + } + + dev->devt = devt; + dev->class = prototype->device->class; + dev->parent = parent; + dev->release = release_loop_device; + dev_set_name(dev, "%s", name); + dev->groups = NULL; + dev_set_drvdata(dev, NULL); + + err = device_register(dev); + if (err) { + put_device(dev); + cdev_del(&driver->cdevs[index]); + return ERR_PTR(err); + } + + return dev; +} + +/** + * fwserial_create - init everything to create TTYs for a specific fw_card + * @unit: fw_unit for first 'serial' unit device probed for this fw_card + * + * This function inits the aggregate structure (an fw_serial instance) + * used to manage the TTY ports registered by a specific fw_card. Also, the + * unit device is added as the first 'peer'. + * + * This unit device may represent a local unit device (as specified by the + * config ROM unit directory) or it may represent a remote unit device + * (as specified by the reading of the remote node's config ROM). + * + * Returns 0 to indicate "ownership" of the unit device, or a negative errno + * value to indicate which error. + */ +static int fwserial_create(struct fw_unit *unit) +{ + struct fw_device *parent = fw_parent_device(unit); + struct fw_card *card = parent->card; + struct fw_serial *serial; + struct fwtty_port *port; + struct device *tty_dev; + int i, j; + int err; + + serial = kzalloc(sizeof(*serial), GFP_KERNEL); + if (!serial) + return -ENOMEM; + + kref_init(&serial->kref); + serial->card = card; + INIT_LIST_HEAD(&serial->peer_list); + + for (i = 0; i < num_ports; ++i) { + port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + err = -ENOMEM; + goto free_ports; + } + tty_port_init(&port->port); + port->index = FWTTY_INVALID_INDEX; + port->port.ops = &fwtty_port_ops; + port->serial = serial; + + spin_lock_init(&port->lock); + INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx); + INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks); + INIT_WORK(&port->hangup, fwtty_do_hangup); + INIT_WORK(&port->push, fwtty_pushrx); + INIT_LIST_HEAD(&port->buf_list); + init_waitqueue_head(&port->wait_tx); + port->max_payload = link_speed_to_max_payload(SCODE_100); + dma_fifo_init(&port->tx_fifo); + + rcu_assign_pointer(port->peer, NULL); + serial->ports[i] = port; + + /* get unique bus addr region for port's status & recv fifo */ + port->rx_handler.length = FWTTY_PORT_RXFIFO_LEN + 4; + port->rx_handler.address_callback = fwtty_port_handler; + port->rx_handler.callback_data = port; + /* + * XXX: use custom memory region above cpu physical memory addrs + * this will ease porting to 64-bit firewire adapters + */ + err = fw_core_add_address_handler(&port->rx_handler, + &fw_high_memory_region); + if (err) { + kfree(port); + goto free_ports; + } + } + /* preserve i for error cleanup */ + + err = fwtty_ports_add(serial); + if (err) { + fwtty_err(&unit, "no space in port table"); + goto free_ports; + } + + for (j = 0; j < num_ttys; ++j) { + tty_dev = tty_port_register_device(&serial->ports[j]->port, + fwtty_driver, + serial->ports[j]->index, + card->device); + if (IS_ERR(tty_dev)) { + err = PTR_ERR(tty_dev); + fwtty_err(&unit, "register tty device error (%d)", err); + goto unregister_ttys; + } + + serial->ports[j]->device = tty_dev; + } + /* preserve j for error cleanup */ + + if (create_loop_dev) { + struct device *loop_dev; + + loop_dev = create_loop_device(fwtty_driver, + serial->ports[0], + serial->ports[num_ttys], + card->device); + if (IS_ERR(loop_dev)) { + err = PTR_ERR(loop_dev); + fwtty_err(&unit, "create loop device failed (%d)", err); + goto unregister_ttys; + } + serial->ports[num_ttys]->device = loop_dev; + serial->ports[num_ttys]->loopback = true; + } + + list_add_rcu(&serial->list, &fwserial_list); + + fwtty_notice(&unit, "TTY over FireWire on device %s (guid %016llx)", + dev_name(card->device), (unsigned long long) card->guid); + + err = fwserial_add_peer(serial, unit); + if (!err) + return 0; + + fwtty_err(&unit, "unable to add peer unit device (%d)", err); + + /* fall-through to error processing */ + list_del_rcu(&serial->list); +unregister_ttys: + for (--j; j >= 0; --j) + tty_unregister_device(fwtty_driver, serial->ports[j]->index); + kref_put(&serial->kref, fwserial_destroy); + return err; + +free_ports: + for (--i; i >= 0; --i) + kfree(serial->ports[i]); + kfree(serial); + return err; +} + +/** + * fwserial_probe: bus probe function for firewire 'serial' unit devices + * + * A 'serial' unit device is created and probed as a result of: + * - declaring a ieee1394 bus id table for 'devices' matching a fabricated + * 'serial' unit specifier id + * - adding a unit directory to the config ROM(s) for a 'serial' unit + * + * The firewire core registers unit devices by enumerating unit directories + * of a node's config ROM after reading the config ROM when a new node is + * added to the bus topology after a bus reset. + * + * The practical implications of this are: + * - this probe is called for both local and remote nodes that have a 'serial' + * unit directory in their config ROM (that matches the specifiers in + * fwserial_id_table). + * - no specific order is enforced for local vs. remote unit devices + * + * This unit driver copes with the lack of specific order in the same way the + * firewire net driver does -- each probe, for either a local or remote unit + * device, is treated as a 'peer' (has a struct fwtty_peer instance) and the + * first peer created for a given fw_card (tracked by the global fwserial_list) + * creates the underlying TTYs (aggregated in a fw_serial instance). + * + * NB: an early attempt to differentiate local & remote unit devices by creating + * peers only for remote units and fw_serial instances (with their + * associated TTY devices) only for local units was discarded. Managing + * the peer lifetimes on device removal proved too complicated. + * + * fwserial_probe/fwserial_remove are effectively serialized by the + * fwserial_list_mutex. This is necessary because the addition of the first peer + * for a given fw_card will trigger the creation of the fw_serial for that + * fw_card, which must not simultaneously contend with the removal of the + * last peer for a given fw_card triggering the destruction of the same + * fw_serial for the same fw_card. + */ +static int fwserial_probe(struct device *dev) +{ + struct fw_unit *unit = fw_unit(dev); + struct fw_serial *serial; + int err; + + mutex_lock(&fwserial_list_mutex); + serial = fwserial_lookup(fw_parent_device(unit)->card); + if (!serial) + err = fwserial_create(unit); + else + err = fwserial_add_peer(serial, unit); + mutex_unlock(&fwserial_list_mutex); + return err; +} + +/** + * fwserial_remove: bus removal function for firewire 'serial' unit devices + * + * The corresponding 'peer' for this unit device is removed from the list of + * peers for the associated fw_serial (which has a 1:1 correspondence with a + * specific fw_card). If this is the last peer being removed, then trigger + * the destruction of the underlying TTYs. + */ +static int fwserial_remove(struct device *dev) +{ + struct fwtty_peer *peer = dev_get_drvdata(dev); + struct fw_serial *serial = peer->serial; + int i; + + mutex_lock(&fwserial_list_mutex); + fwserial_remove_peer(peer); + + if (list_empty(&serial->peer_list)) { + /* unlink from the fwserial_list here */ + list_del_rcu(&serial->list); + + for (i = 0; i < num_ports; ++i) + fwserial_close_port(serial->ports[i]); + kref_put(&serial->kref, fwserial_destroy); + } + mutex_unlock(&fwserial_list_mutex); + + return 0; +} + +/** + * fwserial_update: bus update function for 'firewire' serial unit devices + * + * Updates the new node_id and bus generation for this peer. Note that locking + * is unnecessary; but careful memory barrier usage is important to enforce the + * load and store order of generation & node_id. + * + * The fw-core orders the write of node_id before generation in the parent + * fw_device to ensure that a stale node_id cannot be used with a current + * bus generation. So the generation value must be read before the node_id. + * + * In turn, this orders the write of node_id before generation in the peer to + * also ensure a stale node_id cannot be used with a current bus generation. + */ +static void fwserial_update(struct fw_unit *unit) +{ + struct fw_device *parent = fw_parent_device(unit); + struct fwtty_peer *peer = dev_get_drvdata(&unit->device); + int generation; + + generation = parent->generation; + smp_rmb(); + peer->node_id = parent->node_id; + smp_wmb(); + peer->generation = generation; +} + +static const struct ieee1394_device_id fwserial_id_table[] = { + { + .match_flags = IEEE1394_MATCH_SPECIFIER_ID | + IEEE1394_MATCH_VERSION, + .specifier_id = LINUX_VENDOR_ID, + .version = FWSERIAL_VERSION, + }, + { } +}; + +static struct fw_driver fwserial_driver = { + .driver = { + .owner = THIS_MODULE, + .name = KBUILD_MODNAME, + .bus = &fw_bus_type, + .probe = fwserial_probe, + .remove = fwserial_remove, + }, + .update = fwserial_update, + .id_table = fwserial_id_table, +}; + +#define FW_UNIT_SPECIFIER(id) ((CSR_SPECIFIER_ID << 24) | (id)) +#define FW_UNIT_VERSION(ver) ((CSR_VERSION << 24) | (ver)) +#define FW_UNIT_ADDRESS(ofs) (((CSR_OFFSET | CSR_DEPENDENT_INFO) << 24) \ + | (((ofs) - CSR_REGISTER_BASE) >> 2)) +/* XXX: config ROM definitons could be improved with semi-automated offset + * and length calculation + */ +#define FW_ROM_DESCRIPTOR(ofs) (((CSR_LEAF | CSR_DESCRIPTOR) << 24) | (ofs)) + +struct fwserial_unit_directory_data { + u16 crc; + u16 len; + u32 unit_specifier; + u32 unit_sw_version; + u32 unit_addr_offset; + u32 desc1_ofs; + u16 desc1_crc; + u16 desc1_len; + u32 desc1_data[5]; +} __packed; + +static struct fwserial_unit_directory_data fwserial_unit_directory_data = { + .len = 4, + .unit_specifier = FW_UNIT_SPECIFIER(LINUX_VENDOR_ID), + .unit_sw_version = FW_UNIT_VERSION(FWSERIAL_VERSION), + .desc1_ofs = FW_ROM_DESCRIPTOR(1), + .desc1_len = 5, + .desc1_data = { + 0x00000000, /* type = text */ + 0x00000000, /* enc = ASCII, lang EN */ + 0x4c696e75, /* 'Linux TTY' */ + 0x78205454, + 0x59000000, + }, +}; + +static struct fw_descriptor fwserial_unit_directory = { + .length = sizeof(fwserial_unit_directory_data) / sizeof(u32), + .key = (CSR_DIRECTORY | CSR_UNIT) << 24, + .data = (u32 *)&fwserial_unit_directory_data, +}; + +/* + * The management address is in the unit space region but above other known + * address users (to keep wild writes from causing havoc) + */ +const struct fw_address_region fwserial_mgmt_addr_region = { + .start = CSR_REGISTER_BASE + 0x1e0000ULL, + .end = 0x1000000000000ULL, +}; + +static struct fw_address_handler fwserial_mgmt_addr_handler; + +/** + * fwserial_handle_plug_req - handle VIRT_CABLE_PLUG request work + * @work: ptr to peer->work + * + * Attempts to complete the VIRT_CABLE_PLUG handshake sequence for this peer. + * + * This checks for a collided request-- ie, that a VIRT_CABLE_PLUG request was + * already sent to this peer. If so, the collision is resolved by comparing + * guid values; the loser sends the plug response. + * + * Note: if an error prevents a response, don't do anything -- the + * remote will timeout its request. + */ +static void fwserial_handle_plug_req(struct work_struct *work) +{ + struct fwtty_peer *peer = to_peer(work, work); + struct virt_plug_params *plug_req = &peer->work_params.plug_req; + struct fwtty_port *port; + struct fwserial_mgmt_pkt *pkt; + int rcode; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) + return; + + port = fwserial_find_port(peer); + + spin_lock_bh(&peer->lock); + + switch (peer->state) { + case FWPS_NOT_ATTACHED: + if (!port) { + fwtty_err(&peer->unit, "no more ports avail"); + fill_plug_rsp_nack(pkt); + } else { + peer->port = port; + fill_plug_rsp_ok(pkt, peer->port); + peer_set_state(peer, FWPS_PLUG_RESPONDING); + /* don't release claimed port */ + port = NULL; + } + break; + + case FWPS_PLUG_PENDING: + if (peer->serial->card->guid > peer->guid) + goto cleanup; + + /* We lost - hijack the already-claimed port and send ok */ + del_timer(&peer->timer); + fill_plug_rsp_ok(pkt, peer->port); + peer_set_state(peer, FWPS_PLUG_RESPONDING); + break; + + default: + fill_plug_rsp_nack(pkt); + } + + spin_unlock_bh(&peer->lock); + if (port) + fwserial_release_port(port); + + rcode = fwserial_send_mgmt_sync(peer, pkt); + + spin_lock_bh(&peer->lock); + if (peer->state == FWPS_PLUG_RESPONDING) { + if (rcode == RCODE_COMPLETE) { + struct fwtty_port *tmp = peer->port; + + fwserial_virt_plug_complete(peer, plug_req); + spin_unlock_bh(&peer->lock); + + fwtty_write_port_status(tmp); + spin_lock_bh(&peer->lock); + } else { + fwtty_err(&peer->unit, "PLUG_RSP error (%d)", rcode); + port = peer_revert_state(peer); + } + } +cleanup: + spin_unlock_bh(&peer->lock); + if (port) + fwserial_release_port(port); + kfree(pkt); + return; +} + +static void fwserial_handle_unplug_req(struct work_struct *work) +{ + struct fwtty_peer *peer = to_peer(work, work); + struct fwtty_port *port = NULL; + struct fwserial_mgmt_pkt *pkt; + int rcode; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) + return; + + spin_lock_bh(&peer->lock); + + switch (peer->state) { + case FWPS_ATTACHED: + fill_unplug_rsp_ok(pkt); + peer_set_state(peer, FWPS_UNPLUG_RESPONDING); + break; + + case FWPS_UNPLUG_PENDING: + if (peer->serial->card->guid > peer->guid) + goto cleanup; + + /* We lost - send unplug rsp */ + del_timer(&peer->timer); + fill_unplug_rsp_ok(pkt); + peer_set_state(peer, FWPS_UNPLUG_RESPONDING); + break; + + default: + fill_unplug_rsp_nack(pkt); + } + + spin_unlock_bh(&peer->lock); + + rcode = fwserial_send_mgmt_sync(peer, pkt); + + spin_lock_bh(&peer->lock); + if (peer->state == FWPS_UNPLUG_RESPONDING) { + if (rcode == RCODE_COMPLETE) + port = peer_revert_state(peer); + else + fwtty_err(&peer->unit, "UNPLUG_RSP error (%d)", rcode); + } +cleanup: + spin_unlock_bh(&peer->lock); + if (port) + fwserial_release_port(port); + kfree(pkt); + return; +} + +static int fwserial_parse_mgmt_write(struct fwtty_peer *peer, + struct fwserial_mgmt_pkt *pkt, + unsigned long long addr, + size_t len) +{ + struct fwtty_port *port = NULL; + int rcode; + + if (addr != fwserial_mgmt_addr_handler.offset || len < sizeof(pkt->hdr)) + return RCODE_ADDRESS_ERROR; + + if (len != be16_to_cpu(pkt->hdr.len) || + len != mgmt_pkt_expected_len(pkt->hdr.code)) + return RCODE_DATA_ERROR; + + spin_lock_bh(&peer->lock); + if (peer->state == FWPS_GONE) { + /* + * This should never happen - it would mean that the + * remote unit that just wrote this transaction was + * already removed from the bus -- and the removal was + * processed before we rec'd this transaction + */ + fwtty_err(&peer->unit, "peer already removed"); + spin_unlock_bh(&peer->lock); + return RCODE_ADDRESS_ERROR; + } + + rcode = RCODE_COMPLETE; + + fwtty_dbg(&peer->unit, "mgmt: hdr.code: %04hx", pkt->hdr.code); + + switch (be16_to_cpu(pkt->hdr.code) & FWSC_CODE_MASK) { + case FWSC_VIRT_CABLE_PLUG: + if (work_pending(&peer->work)) { + fwtty_err(&peer->unit, "plug req: busy"); + rcode = RCODE_CONFLICT_ERROR; + + } else { + peer->work_params.plug_req = pkt->plug_req; + PREPARE_WORK(&peer->work, fwserial_handle_plug_req); + queue_work(system_unbound_wq, &peer->work); + } + break; + + case FWSC_VIRT_CABLE_PLUG_RSP: + if (peer->state != FWPS_PLUG_PENDING) { + rcode = RCODE_CONFLICT_ERROR; + + } else if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) { + fwtty_notice(&peer->unit, "NACK plug rsp"); + port = peer_revert_state(peer); + + } else { + struct fwtty_port *tmp = peer->port; + + fwserial_virt_plug_complete(peer, &pkt->plug_rsp); + spin_unlock_bh(&peer->lock); + + fwtty_write_port_status(tmp); + spin_lock_bh(&peer->lock); + } + break; + + case FWSC_VIRT_CABLE_UNPLUG: + if (work_pending(&peer->work)) { + fwtty_err(&peer->unit, "unplug req: busy"); + rcode = RCODE_CONFLICT_ERROR; + } else { + PREPARE_WORK(&peer->work, fwserial_handle_unplug_req); + queue_work(system_unbound_wq, &peer->work); + } + break; + + case FWSC_VIRT_CABLE_UNPLUG_RSP: + if (peer->state != FWPS_UNPLUG_PENDING) + rcode = RCODE_CONFLICT_ERROR; + else { + if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) + fwtty_notice(&peer->unit, "NACK unplug?"); + port = peer_revert_state(peer); + } + break; + + default: + fwtty_err(&peer->unit, "unknown mgmt code %d", + be16_to_cpu(pkt->hdr.code)); + rcode = RCODE_DATA_ERROR; + } + spin_unlock_bh(&peer->lock); + + if (port) + fwserial_release_port(port); + + return rcode; +} + +/** + * fwserial_mgmt_handler: bus address handler for mgmt requests + * @parameters: fw_address_callback_t as specified by firewire core interface + * + * This handler is responsible for handling virtual cable requests from remotes + * for all cards. + */ +static void fwserial_mgmt_handler(struct fw_card *card, + struct fw_request *request, + int tcode, int destination, int source, + int generation, + unsigned long long addr, + void *data, size_t len, + void *callback_data) +{ + struct fwserial_mgmt_pkt *pkt = data; + struct fwtty_peer *peer; + int rcode; + + rcu_read_lock(); + peer = __fwserial_peer_by_node_id(card, generation, source); + if (!peer) { + fwtty_dbg(card, "peer(%d:%x) not found", generation, source); + __dump_peer_list(card); + rcode = RCODE_CONFLICT_ERROR; + + } else { + switch (tcode) { + case TCODE_WRITE_BLOCK_REQUEST: + rcode = fwserial_parse_mgmt_write(peer, pkt, addr, len); + break; + + default: + rcode = RCODE_TYPE_ERROR; + } + } + + rcu_read_unlock(); + fw_send_response(card, request, rcode); +} + +static int __init fwserial_init(void) +{ + int err, num_loops = !!(create_loop_dev); + + /* num_ttys/num_ports must not be set above the static alloc avail */ + if (num_ttys + num_loops > MAX_CARD_PORTS) + num_ttys = MAX_CARD_PORTS - num_loops; + num_ports = num_ttys + num_loops; + + fwtty_driver = alloc_tty_driver(MAX_TOTAL_PORTS); + if (!fwtty_driver) { + err = -ENOMEM; + return err; + } + + fwtty_driver->driver_name = KBUILD_MODNAME; + fwtty_driver->name = tty_dev_name; + fwtty_driver->major = 0; + fwtty_driver->minor_start = 0; + fwtty_driver->type = TTY_DRIVER_TYPE_SERIAL; + fwtty_driver->subtype = SERIAL_TYPE_NORMAL; + fwtty_driver->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV; + + fwtty_driver->init_termios = tty_std_termios; + fwtty_driver->init_termios.c_cflag |= CLOCAL; + tty_set_operations(fwtty_driver, &fwtty_ops); + + err = tty_register_driver(fwtty_driver); + if (err) { + driver_err("register tty driver failed (%d)", err); + goto put_tty; + } + + fwtty_txn_cache = kmem_cache_create("fwtty_txn_cache", + sizeof(struct fwtty_transaction), + 0, 0, fwtty_txn_constructor); + if (!fwtty_txn_cache) { + err = -ENOMEM; + goto unregister_driver; + } + + /* + * Ideally, this address handler would be registered per local node + * (rather than the same handler for all local nodes). However, + * since the firewire core requires the config rom descriptor *before* + * the local unit device(s) are created, a single management handler + * must suffice for all local serial units. + */ + fwserial_mgmt_addr_handler.length = sizeof(struct fwserial_mgmt_pkt); + fwserial_mgmt_addr_handler.address_callback = fwserial_mgmt_handler; + + err = fw_core_add_address_handler(&fwserial_mgmt_addr_handler, + &fwserial_mgmt_addr_region); + if (err) { + driver_err("add management handler failed (%d)", err); + goto destroy_cache; + } + + fwserial_unit_directory_data.unit_addr_offset = + FW_UNIT_ADDRESS(fwserial_mgmt_addr_handler.offset); + err = fw_core_add_descriptor(&fwserial_unit_directory); + if (err) { + driver_err("add unit descriptor failed (%d)", err); + goto remove_handler; + } + + err = driver_register(&fwserial_driver.driver); + if (err) { + driver_err("register fwserial driver failed (%d)", err); + goto remove_descriptor; + } + + return 0; + +remove_descriptor: + fw_core_remove_descriptor(&fwserial_unit_directory); +remove_handler: + fw_core_remove_address_handler(&fwserial_mgmt_addr_handler); +destroy_cache: + kmem_cache_destroy(fwtty_txn_cache); +unregister_driver: + tty_unregister_driver(fwtty_driver); +put_tty: + put_tty_driver(fwtty_driver); + return err; +} + +static void __exit fwserial_exit(void) +{ + driver_unregister(&fwserial_driver.driver); + fw_core_remove_descriptor(&fwserial_unit_directory); + fw_core_remove_address_handler(&fwserial_mgmt_addr_handler); + kmem_cache_destroy(fwtty_txn_cache); + tty_unregister_driver(fwtty_driver); + put_tty_driver(fwtty_driver); +} + +module_init(fwserial_init); +module_exit(fwserial_exit); + +MODULE_AUTHOR("Peter Hurley (peter@hurleysoftware.com)"); +MODULE_DESCRIPTION("FireWire Serial TTY Driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(ieee1394, fwserial_id_table); +MODULE_PARM_DESC(ttys, "Number of ttys to create for each local firewire node"); +MODULE_PARM_DESC(auto, "Auto-connect a tty to each firewire node discovered"); +MODULE_PARM_DESC(loop, "Create a loopback device, fwloop, with ttys"); +MODULE_PARM_DESC(limit_bw, "Limit bandwidth utilization to 20%."); diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h new file mode 100644 index 000000000000..8b572edf9563 --- /dev/null +++ b/drivers/staging/fwserial/fwserial.h @@ -0,0 +1,387 @@ +#ifndef _FIREWIRE_FWSERIAL_H +#define _FIREWIRE_FWSERIAL_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dma_fifo.h" + +#ifdef FWTTY_PROFILING +#define DISTRIBUTION_MAX_SIZE 8192 +#define DISTRIBUTION_MAX_INDEX (ilog2(DISTRIBUTION_MAX_SIZE) + 1) +static inline void profile_size_distrib(unsigned stat[], unsigned val) +{ + int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0; + ++stat[n]; +} +#else +#define DISTRIBUTION_MAX_INDEX 0 +#define profile_size_distrib(st, n) +#endif + +/* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */ +struct virt_plug_params { + __be32 status_hi; + __be32 status_lo; + __be32 fifo_hi; + __be32 fifo_lo; + __be32 fifo_len; +}; + +struct peer_work_params { + union { + struct virt_plug_params plug_req; + }; +}; + +/** + * fwtty_peer: structure representing local & remote unit devices + * @unit: unit child device of fw_device node + * @serial: back pointer to associated fw_serial aggregate + * @guid: unique 64-bit guid for this unit device + * @generation: most recent bus generation + * @node_id: most recent node_id + * @speed: link speed of peer (0 = S100, 2 = S400, ... 5 = S3200) + * @mgmt_addr: bus addr region to write mgmt packets to + * @status_addr: bus addr register to write line status to + * @fifo_addr: bus addr region to write serial output to + * @fifo_len: max length for single write to fifo_addr + * @list: link for insertion into fw_serial's peer_list + * @rcu: for deferring peer reclamation + * @lock: spinlock to synchonize changes to state & port fields + * @work: only one work item can be queued at any one time + * Note: pending work is canceled prior to removal, so this + * peer is valid for at least the lifetime of the work function + * @work_params: parameter block for work functions + * @timer: timer for resetting peer state if remote request times out + * @state: current state + * @connect: work item for auto-connecting + * @connect_retries: # of connections already attempted + * @port: associated tty_port (usable if state == FWSC_ATTACHED) + */ +struct fwtty_peer { + struct fw_unit *unit; + struct fw_serial *serial; + u64 guid; + int generation; + int node_id; + unsigned speed; + int max_payload; + u64 mgmt_addr; + + /* these are usable only if state == FWSC_ATTACHED */ + u64 status_addr; + u64 fifo_addr; + int fifo_len; + + struct list_head list; + struct rcu_head rcu; + + spinlock_t lock; + struct work_struct work; + struct peer_work_params work_params; + struct timer_list timer; + int state; + struct delayed_work connect; + int connect_retries; + + struct fwtty_port *port; +}; + +#define to_peer(ptr, field) (container_of(ptr, struct fwtty_peer, field)) + +/* state values for fwtty_peer.state field */ +enum fwtty_peer_state { + FWPS_GONE, + FWPS_NOT_ATTACHED, + FWPS_ATTACHED, + FWPS_PLUG_PENDING, + FWPS_PLUG_RESPONDING, + FWPS_UNPLUG_PENDING, + FWPS_UNPLUG_RESPONDING, + + FWPS_NO_MGMT_ADDR = -1, +}; + +#define CONNECT_RETRY_DELAY HZ +#define MAX_CONNECT_RETRIES 10 + +/* must be holding peer lock for these state funclets */ +static inline void peer_set_state(struct fwtty_peer *peer, int new) +{ + peer->state = new; +} + +static inline struct fwtty_port *peer_revert_state(struct fwtty_peer *peer) +{ + struct fwtty_port *port = peer->port; + + peer->port = NULL; + peer_set_state(peer, FWPS_NOT_ATTACHED); + return port; +} + +struct fwserial_mgmt_pkt { + struct { + __be16 len; + __be16 code; + } hdr; + union { + struct virt_plug_params plug_req; + struct virt_plug_params plug_rsp; + }; +} __packed; + +/* fwserial_mgmt_packet codes */ +#define FWSC_RSP_OK 0x0000 +#define FWSC_RSP_NACK 0x8000 +#define FWSC_CODE_MASK 0x0fff + +#define FWSC_VIRT_CABLE_PLUG 1 +#define FWSC_VIRT_CABLE_UNPLUG 2 +#define FWSC_VIRT_CABLE_PLUG_RSP 3 +#define FWSC_VIRT_CABLE_UNPLUG_RSP 4 + +/* 1 min. plug timeout -- suitable for userland authorization */ +#define VIRT_CABLE_PLUG_TIMEOUT (60 * HZ) + +struct stats { + unsigned xchars; + unsigned dropped; + unsigned tx_stall; + unsigned fifo_errs; + unsigned sent; + unsigned lost; + unsigned throttled; + unsigned watermark; + unsigned reads[DISTRIBUTION_MAX_INDEX + 1]; + unsigned writes[DISTRIBUTION_MAX_INDEX + 1]; + unsigned txns[DISTRIBUTION_MAX_INDEX + 1]; + unsigned unthrottle[DISTRIBUTION_MAX_INDEX + 1]; +}; + +struct fwconsole_ops { + void (*notify)(int code, void *data); + void (*stats)(struct stats *stats, void *data); + void (*proc_show)(struct seq_file *m, void *data); +}; + +/* codes for console ops notify */ +#define FWCON_NOTIFY_ATTACH 1 +#define FWCON_NOTIFY_DETACH 2 + +struct buffered_rx { + struct list_head list; + size_t n; + unsigned char data[0]; +}; + +/** + * fwtty_port: structure used to track/represent underlying tty_port + * @port: underlying tty_port + * @device: tty device + * @index: index into port_table for this particular port + * note: minor = index + FWSERIAL_TTY_START_MINOR + * @serial: back pointer to the containing fw_serial + * @rx_handler: bus address handler for unique addr region used by remotes + * to communicate with this port. Every port uses + * fwtty_port_handler() for per port transactions. + * @fwcon_ops: ops for attached fw_console (if any) + * @con_data: private data for fw_console + * @wait_tx: waitqueue for sleeping until writer/drain completes tx + * @emit_breaks: delayed work responsible for generating breaks when the + * break line status is active + * @cps : characters per second computed from the termios settings + * @break_last: timestamp in jiffies from last emit_breaks + * @hangup: work responsible for HUPing when carrier is dropped/lost + * @mstatus: loose virtualization of LSR/MSR + * bits 15..0 correspond to TIOCM_* bits + * bits 19..16 reserved for mctrl + * bit 20 OOB_TX_THROTTLE + * bits 23..21 reserved + * bits 31..24 correspond to UART_LSR_* bits + * @lock: spinlock for protecting concurrent access to fields below it + * @mctrl: loose virtualization of MCR + * bits 15..0 correspond to TIOCM_* bits + * bit 16 OOB_RX_THROTTLE + * bits 19..17 reserved + * bits 31..20 reserved for mstatus + * @drain: delayed work scheduled to ensure that writes are flushed. + * The work can race with the writer but concurrent sending is + * prevented with the IN_TX flag. Scheduled under lock to + * limit scheduling when fifo has just been drained. + * @push: work responsible for pushing buffered rx to the ldisc. + * rx can become buffered if the tty buffer is filled before the + * ldisc throttles the sender. + * @buf_list: list of buffered rx yet to be sent to ldisc + * @buffered: byte count of buffered rx + * @tx_fifo: fifo used to store & block-up writes for dma to remote + * @max_payload: max bytes transmissable per dma (based on peer's max_payload) + * @status_mask: UART_LSR_* bitmask significant to rx (based on termios) + * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios) + * @break_ctl: if set, port is 'sending break' to remote + * @write_only: self-explanatory + * @overrun: previous rx was lost (partially or completely) + * @loopback: if set, port is in loopback mode + * @flags: atomic bit flags + * bit 0: IN_TX - gate to allow only one cpu to send from the dma fifo + * at a time. + * bit 1: STOP_TX - force tx to exit while sending + * @peer: rcu-pointer to associated fwtty_peer (if attached) + * NULL if no peer attached + * @icount: predefined statistics reported by the TIOCGICOUNT ioctl + * @stats: additional statistics reported in /proc/tty/driver/firewire_serial + */ +struct fwtty_port { + struct tty_port port; + struct device *device; + unsigned index; + struct fw_serial *serial; + struct fw_address_handler rx_handler; + + struct fwconsole_ops *fwcon_ops; + void *con_data; + + wait_queue_head_t wait_tx; + struct delayed_work emit_breaks; + unsigned cps; + unsigned long break_last; + + struct work_struct hangup; + + unsigned mstatus; + + spinlock_t lock; + unsigned mctrl; + struct delayed_work drain; + struct work_struct push; + struct list_head buf_list; + int buffered; + struct dma_fifo tx_fifo; + int max_payload; + unsigned status_mask; + unsigned ignore_mask; + unsigned break_ctl:1, + write_only:1, + overrun:1, + loopback:1; + unsigned long flags; + + struct fwtty_peer *peer; + + struct async_icount icount; + struct stats stats; +}; + +#define to_port(ptr, field) (container_of(ptr, struct fwtty_port, field)) + +/* bit #s for flags field */ +#define IN_TX 0 +#define STOP_TX 1 +#define BUFFERING_RX 2 + +/* bitmasks for special mctrl/mstatus bits */ +#define OOB_RX_THROTTLE 0x00010000 +#define MCTRL_RSRVD 0x000e0000 +#define OOB_TX_THROTTLE 0x00100000 +#define MSTATUS_RSRVD 0x00e00000 + +#define MCTRL_MASK (TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 | TIOCM_OUT2 | \ + TIOCM_LOOP | OOB_RX_THROTTLE | MCTRL_RSRVD) + +/* XXX even every 1/50th secs. may be unnecessarily accurate */ +/* delay in jiffies between brk emits */ +#define FREQ_BREAKS (HZ / 50) + +/* Ports are allocated in blocks of num_ports for each fw_card */ +#define MAX_CARD_PORTS 32 /* max # of ports per card */ +#define MAX_TOTAL_PORTS 64 /* max # of ports total */ + +/* tuning parameters */ +#define FWTTY_PORT_TXFIFO_LEN 4096 +#define FWTTY_PORT_MAX_PEND_DMA 8 /* costs a cache line per pend */ +#define DRAIN_THRESHOLD 1024 +#define MAX_ASYNC_PAYLOAD 4096 /* ohci-defined limit */ +#define WRITER_MINIMUM 128 +/* TODO: how to set watermark to AR context size? see fwtty_rx() */ +#define HIGH_WATERMARK 32768 /* AR context is 32K */ + +/* + * Size of bus addr region above 4GB used per port as the recv addr + * - must be at least as big as the MAX_ASYNC_PAYLOAD + */ +#define FWTTY_PORT_RXFIFO_LEN MAX_ASYNC_PAYLOAD + +/** + * fw_serial: aggregate used to associate tty ports with specific fw_card + * @card: fw_card associated with this fw_serial device (1:1 association) + * @kref: reference-counted multi-port management allows delayed destroy + * @self: local unit device as 'peer'. Not valid until local unit device + * is enumerated. + * @list: link for insertion into fwserial_list + * @peer_list: list of local & remote unit devices attached to this card + * @ports: fixed array of tty_ports provided by this serial device + */ +struct fw_serial { + struct fw_card *card; + struct kref kref; + + struct fwtty_peer *self; + + struct list_head list; + struct list_head peer_list; + + struct fwtty_port *ports[MAX_CARD_PORTS]; +}; + +#define to_serial(ptr, field) (container_of(ptr, struct fw_serial, field)) + +#define TTY_DEV_NAME "fwtty" /* ttyFW was taken */ +static const char tty_dev_name[] = TTY_DEV_NAME; +static const char loop_dev_name[] = "fwloop"; +extern bool limit_bw; + +struct tty_driver *fwtty_driver; + +#define driver_err(s, v...) pr_err(KBUILD_MODNAME ": " s, ##v) + +struct fwtty_port *fwtty_port_get(unsigned index); +void fwtty_port_put(struct fwtty_port *port); + +static inline void fwtty_bind_console(struct fwtty_port *port, + struct fwconsole_ops *fwcon_ops, + void *data) +{ + port->con_data = data; + port->fwcon_ops = fwcon_ops; +} + +/* + * Returns the max send async payload size in bytes based on the unit device + * link speed - if set to limit bandwidth to max 20%, use lookup table + */ +static inline int link_speed_to_max_payload(unsigned speed) +{ + static const int max_async[] = { 307, 614, 1229, 2458, 4916, 9832, }; + BUILD_BUG_ON(ARRAY_SIZE(max_async) - 1 != SCODE_3200); + + speed = clamp(speed, (unsigned) SCODE_100, (unsigned) SCODE_3200); + if (limit_bw) + return max_async[speed]; + else + return 1 << (speed + 9); +} + +#endif /* _FIREWIRE_FWSERIAL_H */