Merge branch 'linus' into release

CREDITS

@@ -2800,7 +2800,7 @@ D: Starter of Linux1394 effort
 S: ask per mail for current address
 
 N: Nicolas Pitre
-E: nico@cam.org
+E: nico@fluxnic.net
 D: StrongARM SA1100 support integrator & hacker
 D: Xscale PXA architecture
 D: unified SMC 91C9x/91C11x ethernet driver (smc91x)

Documentation/00-INDEX

@@ -82,6 +82,8 @@ block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
 	- info on block devices & drivers
+btmrvl.txt
+	- info on Marvell Bluetooth driver usage.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/

Documentation/ABI/testing/sysfs-bus-pci

@@ -84,6 +84,16 @@ Description:
 		from this part of the device tree.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../reset
+Date:		July 2009
+Contact:	Michael S. Tsirkin <mst@redhat.com>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same device.
+		For devices that have this support, a file named reset
+		will be present in sysfs.  Writing 1 to this file
+		will perform reset.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>

Documentation/DocBook/uio-howto.tmpl

@@ -25,6 +25,10 @@
 	<year>2006-2008</year>
 	<holder>Hans-Jürgen Koch.</holder>
 </copyright>
+<copyright>
+	<year>2009</year>
+	<holder>Red Hat Inc, Michael S. Tsirkin (mst@redhat.com)</holder>
+</copyright>
 
 <legalnotice>
 <para>
@@ -41,6 +45,13 @@ GPL version 2.
 </abstract>
 
 <revhistory>
+	<revision>
+	<revnumber>0.9</revnumber>
+	<date>2009-07-16</date>
+	<authorinitials>mst</authorinitials>
+	<revremark>Added generic pci driver
+		</revremark>
+	</revision>
 	<revision>
 	<revnumber>0.8</revnumber>
 	<date>2008-12-24</date>
@@ -809,6 +820,158 @@ framework to set up sysfs files for this region. Simply leave it alone.
 
 </chapter>
 
+<chapter id="uio_pci_generic" xreflabel="Using Generic driver for PCI cards">
+<?dbhtml filename="uio_pci_generic.html"?>
+<title>Generic PCI UIO driver</title>
+	<para>
+	The generic driver is a kernel module named uio_pci_generic.
+	It can work with any device compliant to PCI 2.3 (circa 2002) and
+	any compliant PCI Express device. Using this, you only need to
+        write the userspace driver, removing the need to write
+        a hardware-specific kernel module.
+	</para>
+
+<sect1 id="uio_pci_generic_binding">
+<title>Making the driver recognize the device</title>
+	<para>
+Since the driver does not declare any device ids, it will not get loaded
+automatically and will not automatically bind to any devices, you must load it
+and allocate id to the driver yourself. For example:
+	<programlisting>
+ modprobe uio_pci_generic
+ echo &quot;8086 10f5&quot; &gt; /sys/bus/pci/drivers/uio_pci_generic/new_id
+	</programlisting>
+	</para>
+	<para>
+If there already is a hardware specific kernel driver for your device, the
+generic driver still won't bind to it, in this case if you want to use the
+generic driver (why would you?) you'll have to manually unbind the hardware
+specific driver and bind the generic driver, like this:
+	<programlisting>
+    echo -n 0000:00:19.0 &gt; /sys/bus/pci/drivers/e1000e/unbind
+    echo -n 0000:00:19.0 &gt; /sys/bus/pci/drivers/uio_pci_generic/bind
+	</programlisting>
+	</para>
+	<para>
+You can verify that the device has been bound to the driver
+by looking for it in sysfs, for example like the following:
+	<programlisting>
+    ls -l /sys/bus/pci/devices/0000:00:19.0/driver
+	</programlisting>
+Which if successful should print
+	<programlisting>
+  .../0000:00:19.0/driver -&gt; ../../../bus/pci/drivers/uio_pci_generic
+	</programlisting>
+Note that the generic driver will not bind to old PCI 2.2 devices.
+If binding the device failed, run the following command:
+	<programlisting>
+  dmesg
+	</programlisting>
+and look in the output for failure reasons
+	</para>
+</sect1>
+
+<sect1 id="uio_pci_generic_internals">
+<title>Things to know about uio_pci_generic</title>
+	<para>
+Interrupts are handled using the Interrupt Disable bit in the PCI command
+register and Interrupt Status bit in the PCI status register.  All devices
+compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should
+support these bits.  uio_pci_generic detects this support, and won't bind to
+devices which do not support the Interrupt Disable Bit in the command register.
+	</para>
+	<para>
+On each interrupt, uio_pci_generic sets the Interrupt Disable bit.
+This prevents the device from generating further interrupts
+until the bit is cleared. The userspace driver should clear this
+bit before blocking and waiting for more interrupts.
+	</para>
+</sect1>
+<sect1 id="uio_pci_generic_userspace">
+<title>Writing userspace driver using uio_pci_generic</title>
+	<para>
+Userspace driver can use pci sysfs interface, or the
+libpci libray that wraps it, to talk to the device and to
+re-enable interrupts by writing to the command register.
+	</para>
+</sect1>
+<sect1 id="uio_pci_generic_example">
+<title>Example code using uio_pci_generic</title>
+	<para>
+Here is some sample userspace driver code using uio_pci_generic:
+<programlisting>
+#include &lt;stdlib.h&gt;
+#include &lt;stdio.h&gt;
+#include &lt;unistd.h&gt;
+#include &lt;sys/types.h&gt;
+#include &lt;sys/stat.h&gt;
+#include &lt;fcntl.h&gt;
+#include &lt;errno.h&gt;
+
+int main()
+{
+	int uiofd;
+	int configfd;
+	int err;
+	int i;
+	unsigned icount;
+	unsigned char command_high;
+
+	uiofd = open(&quot;/dev/uio0&quot;, O_RDONLY);
+	if (uiofd &lt; 0) {
+		perror(&quot;uio open:&quot;);
+		return errno;
+	}
+	configfd = open(&quot;/sys/class/uio/uio0/device/config&quot;, O_RDWR);
+	if (uiofd &lt; 0) {
+		perror(&quot;config open:&quot;);
+		return errno;
+	}
+
+	/* Read and cache command value */
+	err = pread(configfd, &amp;command_high, 1, 5);
+	if (err != 1) {
+		perror(&quot;command config read:&quot;);
+		return errno;
+	}
+	command_high &amp;= ~0x4;
+
+	for(i = 0;; ++i) {
+		/* Print out a message, for debugging. */
+		if (i == 0)
+			fprintf(stderr, &quot;Started uio test driver.\n&quot;);
+		else
+			fprintf(stderr, &quot;Interrupts: %d\n&quot;, icount);
+
+		/****************************************/
+		/* Here we got an interrupt from the
+		   device. Do something to it. */
+		/****************************************/
+
+		/* Re-enable interrupts. */
+		err = pwrite(configfd, &amp;command_high, 1, 5);
+		if (err != 1) {
+			perror(&quot;config write:&quot;);
+			break;
+		}
+
+		/* Wait for next interrupt. */
+		err = read(uiofd, &amp;icount, 4);
+		if (err != 4) {
+			perror(&quot;uio read:&quot;);
+			break;
+		}
+
+	}
+	return errno;
+}
+
+</programlisting>
+	</para>
+</sect1>
+
+</chapter>
+
 <appendix id="app1">
 <title>Further information</title>
 <itemizedlist>

Documentation/PCI/pci-error-recovery.txt

@@ -4,15 +4,17 @@
                         February 2, 2006
 
                  Current document maintainer:
-             Linas Vepstas <linas@austin.ibm.com>
+             Linas Vepstas <linasvepstas@gmail.com>
+          updated by Richard Lary <rlary@us.ibm.com>
+       and Mike Mason <mmlnx@us.ibm.com> on 27-Jul-2009
 
 
 Many PCI bus controllers are able to detect a variety of hardware
 PCI errors on the bus, such as parity errors on the data and address
 busses, as well as SERR and PERR errors.  Some of the more advanced
 chipsets are able to deal with these errors; these include PCI-E chipsets,
-and the PCI-host bridges found on IBM Power4 and Power5-based pSeries
+and the PCI-host bridges found on IBM Power4, Power5 and Power6-based
-boxes. A typical action taken is to disconnect the affected device,
+pSeries boxes. A typical action taken is to disconnect the affected device,
 halting all I/O to it.  The goal of a disconnection is to avoid system
 corruption; for example, to halt system memory corruption due to DMA's
 to "wild" addresses. Typically, a reconnection mechanism is also
@@ -37,10 +39,11 @@ is forced by the need to handle multi-function devices, that is,
 devices that have multiple device drivers associated with them.
 In the first stage, each driver is allowed to indicate what type
 of reset it desires, the choices being a simple re-enabling of I/O
-or requesting a hard reset (a full electrical #RST of the PCI card).
+or requesting a slot reset.
-If any driver requests a full reset, that is what will be done.
 
-After a full reset and/or a re-enabling of I/O, all drivers are
+If any driver requests a slot reset, that is what will be done.
+
+After a reset and/or a re-enabling of I/O, all drivers are
 again notified, so that they may then perform any device setup/config
 that may be required.  After these have all completed, a final
 "resume normal operations" event is sent out.
@@ -101,7 +104,7 @@ if it implements any, it must implement error_detected(). If a callback
 is not implemented, the corresponding feature is considered unsupported.
 For example, if mmio_enabled() and resume() aren't there, then it
 is assumed that the driver is not doing any direct recovery and requires
-a reset. If link_reset() is not implemented, the card is assumed as
+a slot reset. If link_reset() is not implemented, the card is assumed to
 not care about link resets. Typically a driver will want to know about
 a slot_reset().
 
@@ -111,7 +114,7 @@ sequence described below.
 
 STEP 0: Error Event
 -------------------
-PCI bus error is detect by the PCI hardware.  On powerpc, the slot
+A PCI bus error is detected by the PCI hardware.  On powerpc, the slot
 is isolated, in that all I/O is blocked: all reads return 0xffffffff,
 all writes are ignored.
 
@@ -139,7 +142,7 @@ The driver must return one of the following result codes:
 		  a chance to extract some diagnostic information (see
 		  mmio_enable, below).
 		- PCI_ERS_RESULT_NEED_RESET:
-		  Driver returns this if it can't recover without a hard
+		  Driver returns this if it can't recover without a
 		  slot reset.
 		- PCI_ERS_RESULT_DISCONNECT:
 		  Driver returns this if it doesn't want to recover at all.
@@ -169,11 +172,11 @@ is STEP 6 (Permanent Failure).
 
 >>> The current powerpc implementation doesn't much care if the device
 >>> attempts I/O at this point, or not.  I/O's will fail, returning
->>> a value of 0xff on read, and writes will be dropped. If the device
+>>> a value of 0xff on read, and writes will be dropped. If more than
->>> driver attempts more than 10K I/O's to a frozen adapter, it will
+>>> EEH_MAX_FAILS I/O's are attempted to a frozen adapter, EEH
->>> assume that the device driver has gone into an infinite loop, and
+>>> assumes that the device driver has gone into an infinite loop
->>> it will panic the kernel. There doesn't seem to be any other
+>>> and prints an error to syslog.  A reboot is then required to 
->>> way of stopping a device driver that insists on spinning on I/O.
+>>> get the device working again.
 
 STEP 2: MMIO Enabled
 -------------------
@@ -182,15 +185,14 @@ DMA), and then calls the mmio_enabled() callback on all affected
 device drivers.
 
 This is the "early recovery" call. IOs are allowed again, but DMA is
-not (hrm... to be discussed, I prefer not), with some restrictions. This
+not, with some restrictions. This is NOT a callback for the driver to
-is NOT a callback for the driver to start operations again, only to
+start operations again, only to peek/poke at the device, extract diagnostic
-peek/poke at the device, extract diagnostic information, if any, and
+information, if any, and eventually do things like trigger a device local
-eventually do things like trigger a device local reset or some such,
+reset or some such, but not restart operations. This callback is made if
-but not restart operations. This is callback is made if all drivers on
+all drivers on a segment agree that they can try to recover and if no automatic
-a segment agree that they can try to recover and if no automatic link reset
+link reset was performed by the HW. If the platform can't just re-enable IOs
-was performed by the HW. If the platform can't just re-enable IOs without
+without a slot reset or a link reset, it will not call this callback, and
-a slot reset or a link reset, it wont call this callback, and instead
+instead will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset)
-will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset)
 
 >>> The following is proposed; no platform implements this yet:
 >>> Proposal: All I/O's should be done _synchronously_ from within
@@ -228,9 +230,6 @@ proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations).
 If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform
 proceeds to STEP 4 (Slot Reset)
 
->>> The current powerpc implementation does not implement this callback.
-
-
 STEP 3: Link Reset
 ------------------
 The platform resets the link, and then calls the link_reset() callback
@@ -253,16 +252,33 @@ The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5
 
 >>> The current powerpc implementation does not implement this callback.
 
-
 STEP 4: Slot Reset
 ------------------
-The platform performs a soft or hard reset of the device, and then
-calls the slot_reset() callback.
 
-A soft reset consists of asserting the adapter #RST line and then
+In response to a return value of PCI_ERS_RESULT_NEED_RESET, the
+the platform will peform a slot reset on the requesting PCI device(s). 
+The actual steps taken by a platform to perform a slot reset
+will be platform-dependent. Upon completion of slot reset, the
+platform will call the device slot_reset() callback.
+
+Powerpc platforms implement two levels of slot reset:
+soft reset(default) and fundamental(optional) reset.
+
+Powerpc soft reset consists of asserting the adapter #RST line and then
 restoring the PCI BAR's and PCI configuration header to a state
 that is equivalent to what it would be after a fresh system
 power-on followed by power-on BIOS/system firmware initialization.
+Soft reset is also known as hot-reset.
+
+Powerpc fundamental reset is supported by PCI Express cards only
+and results in device's state machines, hardware logic, port states and
+configuration registers to initialize to their default conditions.
+
+For most PCI devices, a soft reset will be sufficient for recovery.
+Optional fundamental reset is provided to support a limited number
+of PCI Express PCI devices  for which a soft reset is not sufficient
+for recovery.
+
 If the platform supports PCI hotplug, then the reset might be
 performed by toggling the slot electrical power off/on.
 
@@ -274,10 +290,12 @@ may result in hung devices, kernel panics, or silent data corruption.
 
 This call gives drivers the chance to re-initialize the hardware
 (re-download firmware, etc.).  At this point, the driver may assume
-that he card is in a fresh state and is fully functional. In
+that the card is in a fresh state and is fully functional. The slot
-particular, interrupt generation should work normally.
+is unfrozen and the driver has full access to PCI config space,
+memory mapped I/O space and DMA. Interrupts (Legacy, MSI, or MSI-X)
+will also be available.
 
-Drivers should not yet restart normal I/O processing operations
+Drivers should not restart normal I/O processing operations
 at this point.  If all device drivers report success on this
 callback, the platform will call resume() to complete the sequence,
 and let the driver restart normal I/O processing.
@@ -302,11 +320,21 @@ driver performs device init only from PCI function 0:
 		- PCI_ERS_RESULT_DISCONNECT
 		Same as above.
 
+Drivers for PCI Express cards that require a fundamental reset must
+set the needs_freset bit in the pci_dev structure in their probe function.  
+For example, the QLogic qla2xxx driver sets the needs_freset bit for certain
+PCI card types:
+
++	/* Set EEH reset type to fundamental if required by hba  */
++	if (IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha))
++		pdev->needs_freset = 1;
++
+
 Platform proceeds either to STEP 5 (Resume Operations) or STEP 6 (Permanent
 Failure).
 
->>> The current powerpc implementation does not currently try a
+>>> The current powerpc implementation does not try a power-cycle
->>> power-cycle reset if the driver returned PCI_ERS_RESULT_DISCONNECT.
+>>> reset if the driver returned PCI_ERS_RESULT_DISCONNECT.
 >>> However, it probably should.
 
 
@@ -348,7 +376,7 @@ software errors.
 
 Conclusion; General Remarks
 ---------------------------
-The way those callbacks are called is platform policy. A platform with
+The way the callbacks are called is platform policy. A platform with
 no slot reset capability may want to just "ignore" drivers that can't
 recover (disconnect them) and try to let other cards on the same segment
 recover. Keep in mind that in most real life cases, though, there will
@@ -361,8 +389,8 @@ That is, the recovery API only requires that:
 
  - There is no guarantee that interrupt delivery can proceed from any
 device on the segment starting from the error detection and until the
-resume callback is sent, at which point interrupts are expected to be
+slot_reset callback is called, at which point interrupts are expected
-fully operational.
+to be fully operational.
 
  - There is no guarantee that interrupt delivery is stopped, that is,
 a driver that gets an interrupt after detecting an error, or that detects
@@ -381,16 +409,23 @@ anyway :)
 >>> Implementation details for the powerpc platform are discussed in
 >>> the file Documentation/powerpc/eeh-pci-error-recovery.txt
 
->>> As of this writing, there are six device drivers with patches
+>>> As of this writing, there is a growing list of device drivers with
->>> implementing error recovery. Not all of these patches are in
+>>> patches implementing error recovery. Not all of these patches are in
 >>> mainline yet. These may be used as "examples":
 >>>
->>> drivers/scsi/ipr.c
+>>> drivers/scsi/ipr
->>> drivers/scsi/sym53cxx_2
+>>> drivers/scsi/sym53c8xx_2
+>>> drivers/scsi/qla2xxx
+>>> drivers/scsi/lpfc
+>>> drivers/next/bnx2.c
 >>> drivers/next/e100.c
 >>> drivers/net/e1000
+>>> drivers/net/e1000e
 >>> drivers/net/ixgb
+>>> drivers/net/ixgbe
+>>> drivers/net/cxgb3
 >>> drivers/net/s2io.c
+>>> drivers/net/qlge
 
 The End
 -------

Documentation/RCU/RTFP.txt

@@ -743,3 +743,80 @@ Revised:
 	RCU, realtime RCU, sleepable RCU, performance.
 "
 }
+
+@article{PaulEMcKenney2008RCUOSR
+,author="Paul E. McKenney and Jonathan Walpole"
+,title="Introducing technology into the {Linux} kernel: a case study"
+,Year="2008"
+,journal="SIGOPS Oper. Syst. Rev."
+,volume="42"
+,number="5"
+,pages="4--17"
+,issn="0163-5980"
+,doi={http://doi.acm.org/10.1145/1400097.1400099}
+,publisher="ACM"
+,address="New York, NY, USA"
+,annotation={
+	Linux changed RCU to a far greater degree than RCU has changed Linux.
+}
+}
+
+@unpublished{PaulEMcKenney2008HierarchicalRCU
+,Author="Paul E. McKenney"
+,Title="Hierarchical {RCU}"
+,month="November"
+,day="3"
+,year="2008"
+,note="Available:
+\url{http://lwn.net/Articles/305782/}
+[Viewed November 6, 2008]"
+,annotation="
+	RCU with combining-tree-based grace-period detection,
+	permitting it to handle thousands of CPUs.
+"
+}
+
+@conference{PaulEMcKenney2009MaliciousURCU
+,Author="Paul E. McKenney"
+,Title="Using a Malicious User-Level {RCU} to Torture {RCU}-Based Algorithms"
+,Booktitle="linux.conf.au 2009"
+,month="January"
+,year="2009"
+,address="Hobart, Australia"
+,note="Available:
+\url{http://www.rdrop.com/users/paulmck/RCU/urcutorture.2009.01.22a.pdf}
+[Viewed February 2, 2009]"
+,annotation="
+	Realtime RCU and torture-testing RCU uses.
+"
+}
+
+@unpublished{MathieuDesnoyers2009URCU
+,Author="Mathieu Desnoyers"
+,Title="[{RFC} git tree] Userspace {RCU} (urcu) for {Linux}"
+,month="February"
+,day="5"
+,year="2009"
+,note="Available:
+\url{http://lkml.org/lkml/2009/2/5/572}
+\url{git://lttng.org/userspace-rcu.git}
+[Viewed February 20, 2009]"
+,annotation="
+	Mathieu Desnoyers's user-space RCU implementation.
+	git://lttng.org/userspace-rcu.git
+"
+}
+
+@unpublished{PaulEMcKenney2009BloatWatchRCU
+,Author="Paul E. McKenney"
+,Title="{RCU}: The {Bloatwatch} Edition"
+,month="March"
+,day="17"
+,year="2009"
+,note="Available:
+\url{http://lwn.net/Articles/323929/}
+[Viewed March 20, 2009]"
+,annotation="
+	Uniprocessor assumptions allow simplified RCU implementation.
+"
+}

Documentation/RCU/UP.txt

@@ -2,14 +2,13 @@ RCU on Uniprocessor Systems
 
 
 A common misconception is that, on UP systems, the call_rcu() primitive
-may immediately invoke its function, and that the synchronize_rcu()
+may immediately invoke its function.  The basis of this misconception
-primitive may return immediately.  The basis of this misconception
 is that since there is only one CPU, it should not be necessary to
 wait for anything else to get done, since there are no other CPUs for
 anything else to be happening on.  Although this approach will -sort- -of-
 work a surprising amount of the time, it is a very bad idea in general.
-This document presents three examples that demonstrate exactly how bad an
+This document presents three examples that demonstrate exactly how bad
-idea this is.
+an idea this is.
 
 
 Example 1: softirq Suicide
@@ -82,11 +81,18 @@ Quick Quiz #2: What locking restriction must RCU callbacks respect?
 
 Summary
 
-Permitting call_rcu() to immediately invoke its arguments or permitting
+Permitting call_rcu() to immediately invoke its arguments breaks RCU,
-synchronize_rcu() to immediately return breaks RCU, even on a UP system.
+even on a UP system.  So do not do it!  Even on a UP system, the RCU
-So do not do it!  Even on a UP system, the RCU infrastructure -must-
+infrastructure -must- respect grace periods, and -must- invoke callbacks
-respect grace periods, and -must- invoke callbacks from a known environment
+from a known environment in which no locks are held.
-in which no locks are held.
+
+It -is- safe for synchronize_sched() and synchronize_rcu_bh() to return
+immediately on an UP system.  It is also safe for synchronize_rcu()
+to return immediately on UP systems, except when running preemptable
+RCU.
+
+Quick Quiz #3: Why can't synchronize_rcu() return immediately on
+	UP systems running preemptable RCU?
 
 
 Answer to Quick Quiz #1:
@@ -117,3 +123,13 @@ Answer to Quick Quiz #2:
 	callbacks acquire locks directly.  However, a great many RCU
 	callbacks do acquire locks -indirectly-, for example, via
 	the kfree() primitive.
+
+Answer to Quick Quiz #3:
+	Why can't synchronize_rcu() return immediately on UP systems
+	running preemptable RCU?
+
+	Because some other task might have been preempted in the middle
+	of an RCU read-side critical section.  If synchronize_rcu()
+	simply immediately returned, it would prematurely signal the
+	end of the grace period, which would come as a nasty shock to
+	that other thread when it started running again.

Documentation/RCU/checklist.txt

@@ -11,7 +11,10 @@ over a rather long period of time, but improvements are always welcome!
 	structure is updated more than about 10% of the time, then
 	you should strongly consider some other approach, unless
 	detailed performance measurements show that RCU is nonetheless
-	the right tool for the job.
+	the right tool for the job.  Yes, you might think of RCU
+	as simply cutting overhead off of the readers and imposing it
+	on the writers.  That is exactly why normal uses of RCU will
+	do much more reading than updating.
 
 	Another exception is where performance is not an issue, and RCU
 	provides a simpler implementation.  An example of this situation
@@ -240,10 +243,11 @@ over a rather long period of time, but improvements are always welcome!
 	instead need to use synchronize_irq() or synchronize_sched().
 
 12.	Any lock acquired by an RCU callback must be acquired elsewhere
-	with irq disabled, e.g., via spin_lock_irqsave().  Failing to
+	with softirq disabled, e.g., via spin_lock_irqsave(),
-	disable irq on a given acquisition of that lock will result in
+	spin_lock_bh(), etc.  Failing to disable irq on a given
-	deadlock as soon as the RCU callback happens to interrupt that
+	acquisition of that lock will result in deadlock as soon as the
-	acquisition's critical section.
+	RCU callback happens to interrupt that acquisition's critical
+	section.
 
 13.	RCU callbacks can be and are executed in parallel.  In many cases,
 	the callback code simply wrappers around kfree(), so that this
@@ -310,3 +314,9 @@ over a rather long period of time, but improvements are always welcome!
 	Because these primitives only wait for pre-existing readers,
 	it is the caller's responsibility to guarantee safety to
 	any subsequent readers.
+
+16.	The various RCU read-side primitives do -not- contain memory
+	barriers.  The CPU (and in some cases, the compiler) is free
+	to reorder code into and out of RCU read-side critical sections.
+	It is the responsibility of the RCU update-side primitives to
+	deal with this.

Documentation/RCU/rcu.txt

@@ -36,7 +36,7 @@ o	How can the updater tell when a grace period has completed
 	executed in user mode, or executed in the idle loop, we can
 	safely free up that item.
 
-	Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
+	Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
 	same effect, but require that the readers manipulate CPU-local
 	counters.  These counters allow limited types of blocking
 	within RCU read-side critical sections.  SRCU also uses
@@ -79,10 +79,10 @@ o	I hear that RCU is patented?  What is with that?
 o	I hear that RCU needs work in order to support realtime kernels?
 
 	This work is largely completed.  Realtime-friendly RCU can be
-	enabled via the CONFIG_PREEMPT_RCU kernel configuration parameter.
+	enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
-	However, work is in progress for enabling priority boosting of
+	parameter.  However, work is in progress for enabling priority
-	preempted RCU read-side critical sections.  This is needed if you
+	boosting of preempted RCU read-side critical sections.	This is
-	have CPU-bound realtime threads.
+	needed if you have CPU-bound realtime threads.
 
 o	Where can I find more information on RCU?
 

Documentation/RCU/rcubarrier.txt

@@ -170,6 +170,13 @@ module invokes call_rcu() from timers, you will need to first cancel all
 the timers, and only then invoke rcu_barrier() to wait for any remaining
 RCU callbacks to complete.
 
+Of course, if you module uses call_rcu_bh(), you will need to invoke
+rcu_barrier_bh() before unloading.  Similarly, if your module uses
+call_rcu_sched(), you will need to invoke rcu_barrier_sched() before
+unloading.  If your module uses call_rcu(), call_rcu_bh(), -and-
+call_rcu_sched(), then you will need to invoke each of rcu_barrier(),
+rcu_barrier_bh(), and rcu_barrier_sched().
+
 
 Implementing rcu_barrier()
 

Documentation/RCU/torture.txt

@@ -76,8 +76,10 @@ torture_type	The type of RCU to test: "rcu" for the rcu_read_lock() API,
 		"rcu_sync" for rcu_read_lock() with synchronous reclamation,
 		"rcu_bh" for the rcu_read_lock_bh() API, "rcu_bh_sync" for
 		rcu_read_lock_bh() with synchronous reclamation, "srcu" for
-		the "srcu_read_lock()" API, and "sched" for the use of
+		the "srcu_read_lock()" API, "sched" for the use of
-		preempt_disable() together with synchronize_sched().
+		preempt_disable() together with synchronize_sched(),
+		and "sched_expedited" for the use of preempt_disable()
+		with synchronize_sched_expedited().
 
 verbose		Enable debug printk()s.  Default is disabled.
 
@@ -162,6 +164,23 @@ of the "old" and "current" counters for the corresponding CPU.  The
 "idx" value maps the "old" and "current" values to the underlying array,
 and is useful for debugging.
 
+Similarly, sched_expedited RCU provides the following:
+
+	sched_expedited-torture: rtc: d0000000016c1880 ver: 1090796 tfle: 0 rta: 1090796 rtaf: 0 rtf: 1090787 rtmbe: 0 nt: 27713319
+	sched_expedited-torture: Reader Pipe:  12660320201 95875 0 0 0 0 0 0 0 0 0
+	sched_expedited-torture: Reader Batch:  12660424885 0 0 0 0 0 0 0 0 0 0
+	sched_expedited-torture: Free-Block Circulation:  1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
+	state: -1 / 0:0 3:0 4:0
+
+As before, the first four lines are similar to those for RCU.
+The last line shows the task-migration state.  The first number is
+-1 if synchronize_sched_expedited() is idle, -2 if in the process of
+posting wakeups to the migration kthreads, and N when waiting on CPU N.
+Each of the colon-separated fields following the "/" is a CPU:state pair.
+Valid states are "0" for idle, "1" for waiting for quiescent state,
+"2" for passed through quiescent state, and "3" when a race with a
+CPU-hotplug event forces use of the synchronize_sched() primitive.
+
 
 USAGE
 

Documentation/RCU/trace.txt

@@ -191,8 +191,7 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 
 The output of "cat rcu/rcudata" looks as follows:
 
-rcu:
+rcu_sched:
-rcu:
   0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
   1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
   2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
@@ -306,7 +305,7 @@ comma-separated-variable spreadsheet format.
 
 The output of "cat rcu/rcugp" looks as follows:
 
-rcu: completed=33062  gpnum=33063
+rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
 Again, this output is for both "rcu" and "rcu_bh".  The fields are
@@ -413,7 +412,7 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 
 The output of "cat rcu/rcu_pending" looks as follows:
 
-rcu:
+rcu_sched:
   0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
   1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
   2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629

Documentation/RCU/whatisRCU.txt

@@ -136,10 +136,10 @@ rcu_read_lock()
 	Used by a reader to inform the reclaimer that the reader is
 	entering an RCU read-side critical section.  It is illegal
 	to block while in an RCU read-side critical section, though
-	kernels built with CONFIG_PREEMPT_RCU can preempt RCU read-side
+	kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU
-	critical sections.  Any RCU-protected data structure accessed
+	read-side critical sections.  Any RCU-protected data structure
-	during an RCU read-side critical section is guaranteed to remain
+	accessed during an RCU read-side critical section is guaranteed to
-	unreclaimed for the full duration of that critical section.
+	remain unreclaimed for the full duration of that critical section.
 	Reference counts may be used in conjunction with RCU to maintain
 	longer-term references to data structures.
 
@@ -785,6 +785,7 @@ RCU pointer/list traversal:
 	rcu_dereference
 	list_for_each_entry_rcu
 	hlist_for_each_entry_rcu
+	hlist_nulls_for_each_entry_rcu
 
 	list_for_each_continue_rcu	(to be deprecated in favor of new
 					 list_for_each_entry_continue_rcu)
@@ -807,19 +808,23 @@ RCU:	Critical sections	Grace period		Barrier
 
 	rcu_read_lock		synchronize_net		rcu_barrier
 	rcu_read_unlock		synchronize_rcu
+				synchronize_rcu_expedited
 				call_rcu
 
 
 bh:	Critical sections	Grace period		Barrier
 
 	rcu_read_lock_bh	call_rcu_bh		rcu_barrier_bh
-	rcu_read_unlock_bh
+	rcu_read_unlock_bh	synchronize_rcu_bh
+				synchronize_rcu_bh_expedited
 
 
 sched:	Critical sections	Grace period		Barrier
 
-	[preempt_disable]	synchronize_sched	rcu_barrier_sched
+	rcu_read_lock_sched	synchronize_sched	rcu_barrier_sched
-	[and friends]		call_rcu_sched
+	rcu_read_unlock_sched	call_rcu_sched
+	[preempt_disable]	synchronize_sched_expedited
+	[and friends]
 
 
 SRCU:	Critical sections	Grace period		Barrier
@@ -827,6 +832,9 @@ SRCU:	Critical sections	Grace period		Barrier
 	srcu_read_lock		synchronize_srcu	N/A
 	srcu_read_unlock
 
+SRCU:	Initialization/cleanup
+	init_srcu_struct
+	cleanup_srcu_struct
 
 See the comment headers in the source code (or the docbook generated
 from them) for more information.

Documentation/arm/OMAP/omap_pm

@@ -0,0 +1,129 @@
+
+The OMAP PM interface
+=====================
+
+This document describes the temporary OMAP PM interface.  Driver
+authors use these functions to communicate minimum latency or
+throughput constraints to the kernel power management code.
+Over time, the intention is to merge features from the OMAP PM
+interface into the Linux PM QoS code.
+
+Drivers need to express PM parameters which:
+
+- support the range of power management parameters present in the TI SRF;
+
+- separate the drivers from the underlying PM parameter
+  implementation, whether it is the TI SRF or Linux PM QoS or Linux
+  latency framework or something else;
+
+- specify PM parameters in terms of fundamental units, such as
+  latency and throughput, rather than units which are specific to OMAP
+  or to particular OMAP variants;
+
+- allow drivers which are shared with other architectures (e.g.,
+  DaVinci) to add these constraints in a way which won't affect non-OMAP
+  systems,
+
+- can be implemented immediately with minimal disruption of other
+  architectures.
+
+
+This document proposes the OMAP PM interface, including the following
+five power management functions for driver code:
+
+1. Set the maximum MPU wakeup latency:
+   (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
+
+2. Set the maximum device wakeup latency:
+   (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
+
+3. Set the maximum system DMA transfer start latency (CORE pwrdm):
+   (*pdata->set_max_sdma_lat)(struct device *dev, long t)
+
+4. Set the minimum bus throughput needed by a device:
+   (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
+
+5. Return the number of times the device has lost context
+   (*pdata->get_dev_context_loss_count)(struct device *dev)
+
+
+Further documentation for all OMAP PM interface functions can be
+found in arch/arm/plat-omap/include/mach/omap-pm.h.
+
+
+The OMAP PM layer is intended to be temporary
+---------------------------------------------
+
+The intention is that eventually the Linux PM QoS layer should support
+the range of power management features present in OMAP3.  As this
+happens, existing drivers using the OMAP PM interface can be modified
+to use the Linux PM QoS code; and the OMAP PM interface can disappear.
+
+
+Driver usage of the OMAP PM functions
+-------------------------------------
+
+As the 'pdata' in the above examples indicates, these functions are
+exposed to drivers through function pointers in driver .platform_data
+structures.  The function pointers are initialized by the board-*.c
+files to point to the corresponding OMAP PM functions:
+.set_max_dev_wakeup_lat will point to
+omap_pm_set_max_dev_wakeup_lat(), etc.  Other architectures which do
+not support these functions should leave these function pointers set
+to NULL.  Drivers should use the following idiom:
+
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, t);
+
+The most common usage of these functions will probably be to specify
+the maximum time from when an interrupt occurs, to when the device
+becomes accessible.  To accomplish this, driver writers should use the
+set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
+latency, and the set_max_dev_wakeup_lat() function to constrain the
+device wakeup latency (from clk_enable() to accessibility).  For
+example,
+
+        /* Limit MPU wakeup latency */
+        if (pdata->set_max_mpu_wakeup_lat)
+            (*pdata->set_max_mpu_wakeup_lat)(dev, tc);
+
+        /* Limit device powerdomain wakeup latency */
+        if (pdata->set_max_dev_wakeup_lat)
+            (*pdata->set_max_dev_wakeup_lat)(dev, td);
+
+        /* total wakeup latency in this example: (tc + td) */
+
+The PM parameters can be overwritten by calling the function again
+with the new value.  The settings can be removed by calling the
+function with a t argument of -1 (except in the case of
+set_max_bus_tput(), which should be called with an r argument of 0).
+
+The fifth function above, omap_pm_get_dev_context_loss_count(),
+is intended as an optimization to allow drivers to determine whether the
+device has lost its internal context.  If context has been lost, the
+driver must restore its internal context before proceeding.
+
+
+Other specialized interface functions
+-------------------------------------
+
+The five functions listed above are intended to be usable by any
+device driver.  DSPBridge and CPUFreq have a few special requirements.
+DSPBridge expresses target DSP performance levels in terms of OPP IDs.
+CPUFreq expresses target MPU performance levels in terms of MPU
+frequency.  The OMAP PM interface contains functions for these
+specialized cases to convert that input information (OPPs/MPU
+frequency) into the form that the underlying power management
+implementation needs:
+
+6. (*pdata->dsp_get_opp_table)(void)
+
+7. (*pdata->dsp_set_min_opp)(u8 opp_id)
+
+8. (*pdata->dsp_get_opp)(void)
+
+9. (*pdata->cpu_get_freq_table)(void)
+
+10. (*pdata->cpu_set_freq)(unsigned long f)
+
+11. (*pdata->cpu_get_freq)(void)

Documentation/arm/SA1100/ADSBitsy

@@ -40,4 +40,4 @@ Notes:
   mode, the timing is off so the image is corrupted.  This will be
   fixed soon.
 
-Any contribution can be sent to nico@cam.org and will be greatly welcome!
+Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!

Documentation/arm/SA1100/Assabet

@@ -240,7 +240,7 @@ Then, rebooting the Assabet is just a matter of waiting for the login prompt.
 
 
 Nicolas Pitre
-nico@cam.org
+nico@fluxnic.net
 June 12, 2001
 
 

Documentation/arm/SA1100/Brutus

@@ -60,7 +60,7 @@ little modifications.
 
 Any contribution is welcome.
 
-Please send patches to nico@cam.org
+Please send patches to nico@fluxnic.net
 
 Have Fun !
 

Documentation/arm/SA1100/GraphicsClient

@@ -4,7 +4,7 @@ For more details, contact Applied Data Systems or see
 http://www.applieddata.net/products.html
 
 The original Linux support for this product has been provided by 
-Nicolas Pitre <nico@cam.org>. Continued development work by
+Nicolas Pitre <nico@fluxnic.net>. Continued development work by
 Woojung Huh <whuh@applieddata.net>
 
 It's currently possible to mount a root filesystem via NFS providing a
@@ -94,5 +94,5 @@ Notes:
   mode, the timing is off so the image is corrupted.  This will be
   fixed soon.
 
-Any contribution can be sent to nico@cam.org and will be greatly welcome!
+Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!
 

Documentation/arm/SA1100/GraphicsMaster

@@ -4,7 +4,7 @@ For more details, contact Applied Data Systems or see
 http://www.applieddata.net/products.html
 
 The original Linux support for this product has been provided by
-Nicolas Pitre <nico@cam.org>. Continued development work by
+Nicolas Pitre <nico@fluxnic.net>. Continued development work by
 Woojung Huh <whuh@applieddata.net>
 
 Use 'make graphicsmaster_config' before any 'make config'.
@@ -50,4 +50,4 @@ Notes:
   mode, the timing is off so the image is corrupted.  This will be
   fixed soon.
 
-Any contribution can be sent to nico@cam.org and will be greatly welcome!
+Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!

Documentation/arm/SA1100/Victor

@@ -9,7 +9,7 @@ Of course Victor is using Linux as its main operating system.
 The Victor implementation for Linux is maintained by Nicolas Pitre:
 
 	nico@visuaide.com
-	nico@cam.org
+	nico@fluxnic.net
 
 For any comments, please feel free to contact me through the above
 addresses.

Documentation/arm/Samsung-S3C24XX/CPUfreq.txt

@@ -0,0 +1,75 @@
+		S3C24XX CPUfreq support
+		=======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2

Documentation/btmrvl.txt

@@ -0,0 +1,119 @@
+=======================================================================
+		README for btmrvl driver
+=======================================================================
+
+
+All commands are used via debugfs interface.
+
+=====================
+Set/get driver configurations:
+
+Path:	/debug/btmrvl/config/
+
+gpiogap=[n]
+hscfgcmd
+	These commands are used to configure the host sleep parameters.
+	bit 8:0  -- Gap
+	bit 16:8 -- GPIO
+
+	where GPIO is the pin number of GPIO used to wake up the host.
+	It could be any valid GPIO pin# (e.g. 0-7) or 0xff (SDIO interface
+	wakeup will be used instead).
+
+	where Gap is the gap in milli seconds between wakeup signal and
+	wakeup event, or 0xff for special host sleep setting.
+
+	Usage:
+		# Use SDIO interface to wake up the host and set GAP to 0x80:
+		echo 0xff80 > /debug/btmrvl/config/gpiogap
+		echo 1 > /debug/btmrvl/config/hscfgcmd
+
+		# Use GPIO pin #3 to wake up the host and set GAP to 0xff:
+		echo 0x03ff >  /debug/btmrvl/config/gpiogap
+		echo 1 > /debug/btmrvl/config/hscfgcmd
+
+psmode=[n]
+pscmd
+	These commands are used to enable/disable auto sleep mode
+
+	where the option is:
+			1 	-- Enable auto sleep mode
+			0 	-- Disable auto sleep mode
+
+	Usage:
+		# Enable auto sleep mode
+		echo 1 > /debug/btmrvl/config/psmode
+		echo 1 > /debug/btmrvl/config/pscmd
+
+		# Disable auto sleep mode
+		echo 0 > /debug/btmrvl/config/psmode
+		echo 1 > /debug/btmrvl/config/pscmd
+
+
+hsmode=[n]
+hscmd
+	These commands are used to enable host sleep or wake up firmware
+
+	where the option is:
+			1	-- Enable host sleep
+			0	-- Wake up firmware
+
+	Usage:
+		# Enable host sleep
+		echo 1 > /debug/btmrvl/config/hsmode
+		echo 1 > /debug/btmrvl/config/hscmd
+
+		# Wake up firmware
+		echo 0 > /debug/btmrvl/config/hsmode
+		echo 1 > /debug/btmrvl/config/hscmd
+
+
+======================
+Get driver status:
+
+Path:	/debug/btmrvl/status/
+
+Usage:
+	cat /debug/btmrvl/status/<args>
+
+where the args are:
+
+curpsmode
+	This command displays current auto sleep status.
+
+psstate
+	This command display the power save state.
+
+hsstate
+	This command display the host sleep state.
+
+txdnldrdy
+	This command displays the value of Tx download ready flag.
+
+
+=====================
+
+Use hcitool to issue raw hci command, refer to hcitool manual
+
+	Usage: Hcitool cmd <ogf> <ocf> [Parameters]
+
+	Interface Control Command
+	hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00    --Enable All interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01    --Enable Wlan interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02    --Enable BT interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x00 0x00    --Disable All interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01    --Disable Wlan interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02    --Disable BT interface
+
+=======================================================================
+
+
+SD8688 firmware:
+
+/lib/firmware/sd8688_helper.bin
+/lib/firmware/sd8688.bin
+
+
+The images can be downloaded from:
+
+git.infradead.org/users/dwmw2/linux-firmware.git/libertas/

Documentation/connector/Makefile

@@ -9,3 +9,8 @@ hostprogs-y := ucon
 always := $(hostprogs-y)
 
 HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
+
+all: modules
+
+modules clean:
+	$(MAKE) -C ../.. SUBDIRS=$(PWD) $@

Documentation/connector/cn_test.c

@@ -19,6 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) "cn_test: " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -27,18 +29,17 @@
 
 #include <linux/connector.h>
 
-static struct cb_id cn_test_id = { 0x123, 0x456 };
+static struct cb_id cn_test_id = { CN_NETLINK_USERS + 3, 0x456 };
 static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-void cn_test_callback(void *data)
+static void cn_test_callback(struct cn_msg *msg)
 {
-	struct cn_msg *msg = (struct cn_msg *)data;
+	pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
-
+	        __func__, jiffies, msg->id.idx, msg->id.val,
-	printk("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
+	        msg->seq, msg->ack, msg->len,
-	       __func__, jiffies, msg->id.idx, msg->id.val,
+	        msg->len ? (char *)msg->data : "");
-	       msg->seq, msg->ack, msg->len, (char *)msg->data);
 }
 
 /*
@@ -63,9 +64,7 @@ static int cn_test_want_notify(void)
 
 	skb = alloc_skb(size, GFP_ATOMIC);
 	if (!skb) {
-		printk(KERN_ERR "Failed to allocate new skb with size=%u.\n",
+		pr_err("failed to allocate new skb with size=%u\n", size);
-		       size);
-
 		return -ENOMEM;
 	}
 
@@ -114,12 +113,12 @@ static int cn_test_want_notify(void)
 	//netlink_broadcast(nls, skb, 0, ctl->group, GFP_ATOMIC);
 	netlink_unicast(nls, skb, 0, 0);
 
-	printk(KERN_INFO "Request was sent. Group=0x%x.\n", ctl->group);
+	pr_info("request was sent: group=0x%x\n", ctl->group);
 
 	return 0;
 
 nlmsg_failure:
-	printk(KERN_ERR "Failed to send %u.%u\n", msg->seq, msg->ack);
+	pr_err("failed to send %u.%u\n", msg->seq, msg->ack);
 	kfree_skb(skb);
 	return -EINVAL;
 }
@@ -131,6 +130,8 @@ static void cn_test_timer_func(unsigned long __data)
 	struct cn_msg *m;
 	char data[32];
 
+	pr_debug("%s: timer fired with data %lu\n", __func__, __data);
+
 	m = kzalloc(sizeof(*m) + sizeof(data), GFP_ATOMIC);
 	if (m) {
 
@@ -150,7 +151,7 @@ static void cn_test_timer_func(unsigned long __data)
 
 	cn_test_timer_counter++;
 
-	mod_timer(&cn_test_timer, jiffies + HZ);
+	mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
 }
 
 static int cn_test_init(void)
@@ -168,8 +169,10 @@ static int cn_test_init(void)
 	}
 
 	setup_timer(&cn_test_timer, cn_test_timer_func, 0);
-	cn_test_timer.expires = jiffies + HZ;
+	mod_timer(&cn_test_timer, jiffies + msecs_to_jiffies(1000));
-	add_timer(&cn_test_timer);
+
+	pr_info("initialized with id={%u.%u}\n",
+		cn_test_id.idx, cn_test_id.val);
 
 	return 0;
 

Documentation/connector/connector.txt

@@ -5,10 +5,10 @@ Kernel Connector.
 Kernel connector - new netlink based userspace <-> kernel space easy
 to use communication module.
 
-Connector driver adds possibility to connect various agents using
+The Connector driver makes it easy to connect various agents using a
-netlink based network.  One must register callback and
+netlink based network.  One must register a callback and an identifier.
-identifier. When driver receives special netlink message with
+When the driver receives a special netlink message with the appropriate
-appropriate identifier, appropriate callback will be called.
+identifier, the appropriate callback will be called.
 
 From the userspace point of view it's quite straightforward:
 
@@ -17,10 +17,10 @@ From the userspace point of view it's quite straightforward:
 	send();
 	recv();
 
-But if kernelspace want to use full power of such connections, driver
+But if kernelspace wants to use the full power of such connections, the
-writer must create special sockets, must know about struct sk_buff
+driver writer must create special sockets, must know about struct sk_buff
-handling...  Connector allows any kernelspace agents to use netlink
+handling, etc...  The Connector driver allows any kernelspace agents to use
-based networking for inter-process communication in a significantly
+netlink based networking for inter-process communication in a significantly
 easier way:
 
 int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
@@ -32,15 +32,15 @@ struct cb_id
 	__u32			val;
 };
 
-idx and val are unique identifiers which must be registered in
+idx and val are unique identifiers which must be registered in the
-connector.h for in-kernel usage.  void (*callback) (void *) - is a
+connector.h header for in-kernel usage.  void (*callback) (void *) is a
-callback function which will be called when message with above idx.val
+callback function which will be called when a message with above idx.val
-will be received by connector core.  Argument for that function must
+is received by the connector core.  The argument for that function must
 be dereferenced to struct cn_msg *.
 
 struct cn_msg
 {
-	struct cb_id 		id;
+	struct cb_id		id;
 
 	__u32			seq;
 	__u32			ack;
@@ -55,92 +55,95 @@ Connector interfaces.
 
 int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
 
-Registers new callback with connector core.
+ Registers new callback with connector core.
 
-struct cb_id *id 		- unique connector's user identifier.
+ struct cb_id *id		- unique connector's user identifier.
-			  	  It must be registered in connector.h for legal in-kernel users.
+				  It must be registered in connector.h for legal in-kernel users.
-char *name 			- connector's callback symbolic name.
+ char *name			- connector's callback symbolic name.
-void (*callback) (void *)	- connector's callback.
+ void (*callback) (void *)	- connector's callback.
 				  Argument must be dereferenced to struct cn_msg *.
 
+
 void cn_del_callback(struct cb_id *id);
 
-Unregisters new callback with connector core.
+ Unregisters new callback with connector core.
+
+ struct cb_id *id		- unique connector's user identifier.
 
-struct cb_id *id 		- unique connector's user identifier.
 
 int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
 
-Sends message to the specified groups.  It can be safely called from
+ Sends message to the specified groups.  It can be safely called from
-softirq context, but may silently fail under strong memory pressure.
+ softirq context, but may silently fail under strong memory pressure.
-If there are no listeners for given group -ESRCH can be returned.
+ If there are no listeners for given group -ESRCH can be returned.
 
-struct cn_msg *			- message header(with attached data).
+ struct cn_msg *		- message header(with attached data).
-u32 __group			- destination group.
+ u32 __group			- destination group.
 				  If __group is zero, then appropriate group will
 				  be searched through all registered connector users,
 				  and message will be delivered to the group which was
 				  created for user with the same ID as in msg.
 				  If __group is not zero, then message will be delivered
 				  to the specified group.
-int gfp_mask			- GFP mask.
+ int gfp_mask			- GFP mask.
 
-Note: When registering new callback user, connector core assigns
+ Note: When registering new callback user, connector core assigns
-netlink group to the user which is equal to it's id.idx.
+ netlink group to the user which is equal to it's id.idx.
 
 /*****************************************/
 Protocol description.
 /*****************************************/
 
-Current offers transport layer with fixed header.  Recommended
+The current framework offers a transport layer with fixed headers.  The
-protocol which uses such header is following:
+recommended protocol which uses such a header is as following:
 
 msg->seq and msg->ack are used to determine message genealogy.  When
-someone sends message it puts there locally unique sequence and random
+someone sends a message, they use a locally unique sequence and random
-acknowledge numbers.  Sequence number may be copied into
+acknowledge number.  The sequence number may be copied into
 nlmsghdr->nlmsg_seq too.
 
-Sequence number is incremented with each message to be sent.
+The sequence number is incremented with each message sent.
 
-If we expect reply to our message, then sequence number in received
+If you expect a reply to the message, then the sequence number in the
-message MUST be the same as in original message, and acknowledge
+received message MUST be the same as in the original message, and the
-number MUST be the same + 1.
+acknowledge number MUST be the same + 1.
 
-If we receive message and it's sequence number is not equal to one we
+If we receive a message and its sequence number is not equal to one we
-are expecting, then it is new message.  If we receive message and it's
+are expecting, then it is a new message.  If we receive a message and
-sequence number is the same as one we are expecting, but it's
+its sequence number is the same as one we are expecting, but its
-acknowledge is not equal acknowledge number in original message + 1,
+acknowledge is not equal to the acknowledge number in the original
-then it is new message.
+message + 1, then it is a new message.
 
-Obviously, protocol header contains above id.
+Obviously, the protocol header contains the above id.
 
-connector allows event notification in the following form: kernel
+The connector allows event notification in the following form: kernel
 driver or userspace process can ask connector to notify it when
-selected id's will be turned on or off(registered or unregistered it's
+selected ids will be turned on or off (registered or unregistered its
-callback). It is done by sending special command to connector
+callback).  It is done by sending a special command to the connector
-driver(it also registers itself with id={-1, -1}).
+driver (it also registers itself with id={-1, -1}).
 
-As example of usage Documentation/connector now contains cn_test.c -
+As example of this usage can be found in the cn_test.c module which
-testing module which uses connector to request notification and to
+uses the connector to request notification and to send messages.
-send messages.
 
 /*****************************************/
 Reliability.
 /*****************************************/
 
-Netlink itself is not reliable protocol, that means that messages can
+Netlink itself is not a reliable protocol.  That means that messages can
 be lost due to memory pressure or process' receiving queue overflowed,
-so caller is warned must be prepared. That is why struct cn_msg [main
+so caller is warned that it must be prepared.  That is why the struct
-connector's message header] contains u32 seq and u32 ack fields.
+cn_msg [main connector's message header] contains u32 seq and u32 ack
+fields.
 
 /*****************************************/
 Userspace usage.
 /*****************************************/
+
 2.6.14 has a new netlink socket implementation, which by default does not
-allow to send data to netlink groups other than 1.
+allow people to send data to netlink groups other than 1.
-So, if to use netlink socket (for example using connector) 
+So, if you wish to use a netlink socket (for example using connector)
-with different group number userspace application must subscribe to 
+with a different group number, the userspace application must subscribe to
-that group. It can be achieved by following pseudocode:
+that group first.  It can be achieved by the following pseudocode:
 
 s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
 
@@ -160,8 +163,8 @@ if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
 }
 
 Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
-option. To drop multicast subscription one should call above socket option
+option.  To drop a multicast subscription, one should call the above socket
-with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+option with the NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
 
 2.6.14 netlink code only allows to select a group which is less or equal to
 the maximum group number, which is used at netlink_kernel_create() time.

Documentation/connector/ucon.c

@@ -30,18 +30,24 @@
 
 #include <arpa/inet.h>
 
+#include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
 #include <string.h>
 #include <errno.h>
 #include <time.h>
+#include <getopt.h>
 
 #include <linux/connector.h>
 
 #define DEBUG
 #define NETLINK_CONNECTOR 	11
 
+/* Hopefully your userspace connector.h matches this kernel */
+#define CN_TEST_IDX		CN_NETLINK_USERS + 3
+#define CN_TEST_VAL		0x456
+
 #ifdef DEBUG
 #define ulog(f, a...) fprintf(stdout, f, ##a)
 #else
@@ -83,6 +89,25 @@ static int netlink_send(int s, struct cn_msg *msg)
 	return err;
 }
 
+static void usage(void)
+{
+	printf(
+		"Usage: ucon [options] [output file]\n"
+		"\n"
+		"\t-h\tthis help screen\n"
+		"\t-s\tsend buffers to the test module\n"
+		"\n"
+		"The default behavior of ucon is to subscribe to the test module\n"
+		"and wait for state messages.  Any ones received are dumped to the\n"
+		"specified output file (or stdout).  The test module is assumed to\n"
+		"have an id of {%u.%u}\n"
+		"\n"
+		"If you get no output, then verify the cn_test module id matches\n"
+		"the expected id above.\n"
+		, CN_TEST_IDX, CN_TEST_VAL
+	);
+}
+
 int main(int argc, char *argv[])
 {
 	int s;
@@ -94,17 +119,34 @@ int main(int argc, char *argv[])
 	FILE *out;
 	time_t tm;
 	struct pollfd pfd;
+	bool send_msgs = false;
 
-	if (argc < 2)
+	while ((s = getopt(argc, argv, "hs")) != -1) {
-		out = stdout;
+		switch (s) {
-	else {
+		case 's':
-		out = fopen(argv[1], "a+");
+			send_msgs = true;
+			break;
+
+		case 'h':
+			usage();
+			return 0;
+
+		default:
+			/* getopt() outputs an error for us */
+			usage();
+			return 1;
+		}
+	}
+
+	if (argc != optind) {
+		out = fopen(argv[optind], "a+");
 		if (!out) {
 			ulog("Unable to open %s for writing: %s\n",
 				argv[1], strerror(errno));
 			out = stdout;
 		}
-	}
+	} else
+		out = stdout;
 
 	memset(buf, 0, sizeof(buf));
 
@@ -115,9 +157,11 @@ int main(int argc, char *argv[])
 	}
 
 	l_local.nl_family = AF_NETLINK;
-	l_local.nl_groups = 0x123; /* bitmask of requested groups */
+	l_local.nl_groups = -1; /* bitmask of requested groups */
 	l_local.nl_pid = 0;
 
+	ulog("subscribing to %u.%u\n", CN_TEST_IDX, CN_TEST_VAL);
+
 	if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
 		perror("bind");
 		close(s);
@@ -130,15 +174,15 @@ int main(int argc, char *argv[])
 		setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on));
 	}
 #endif
-	if (0) {
+	if (send_msgs) {
 		int i, j;
 
 		memset(buf, 0, sizeof(buf));
 
 		data = (struct cn_msg *)buf;
 
-		data->id.idx = 0x123;
+		data->id.idx = CN_TEST_IDX;
-		data->id.val = 0x456;
+		data->id.val = CN_TEST_VAL;
 		data->seq = seq++;
 		data->ack = 0;
 		data->len = 0;

Documentation/cpu-freq/user-guide.txt

@@ -176,7 +176,9 @@ scaling_governor,		and by "echoing" the name of another
 				work on some specific architectures or
 				processors.
 
-cpuinfo_cur_freq :		Current speed of the CPU, in KHz.
+cpuinfo_cur_freq :		Current frequency of the CPU as obtained from
+				the hardware, in KHz. This is the frequency
+				the CPU actually runs at.
 
 scaling_available_frequencies : List of available frequencies, in KHz.
 
@@ -196,7 +198,10 @@ related_cpus :			List of CPUs that need some sort of frequency
 
 scaling_driver :		Hardware driver for cpufreq.
 
-scaling_cur_freq :		Current frequency of the CPU, in KHz.
+scaling_cur_freq :		Current frequency of the CPU as determined by
+				the governor and cpufreq core, in KHz. This is
+				the frequency the kernel thinks the CPU runs
+				at.
 
 If you have selected the "userspace" governor which allows you to
 set the CPU operating frequency to a specific value, you can read out

Documentation/dontdiff

@@ -152,7 +152,6 @@ piggy.gz
 piggyback
 pnmtologo
 ppc_defs.h*
-promcon_tbl.c
 pss_boot.h
 qconf
 raid6altivec*.c

Documentation/feature-removal-schedule.txt

@@ -6,6 +6,35 @@ be removed from this file.
 
 ---------------------------
 
+What:	PRISM54
+When:	2.6.34
+
+Why:	prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+	prism54 wireless driver. After Intersil stopped selling these
+	devices in preference for the newer more flexible SoftMAC devices
+	a SoftMAC device driver was required and prism54 did not support
+	them. The p54pci driver now exists and has been present in the kernel for
+	a while. This driver supports both SoftMAC devices and FullMAC devices.
+	The main difference between these devices was the amount of memory which
+	could be used for the firmware. The SoftMAC devices support a smaller
+	amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+	devices's memory. p54pci supports not only PCI / Cardbus but also USB
+	and SPI. Since p54pci supports all devices prism54 supports
+	you will have a conflict. I'm not quite sure how distributions are
+	handling this conflict right now. prism54 was kept around due to
+	claims users may experience issues when using the SoftMAC driver.
+	Time has passed users have not reported issues. If you use prism54
+	and for whatever reason you cannot use p54pci please let us know!
+	E-mail us at: linux-wireless@vger.kernel.org
+
+	For more information see the p54 wiki page:
+
+	http://wireless.kernel.org/en/users/Drivers/p54
+
+Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
@@ -206,24 +235,6 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
-What: libata spindown skipping and warning
-When: Dec 2008
-Why:  Some halt(8) implementations synchronize caches for and spin
-      down libata disks because libata didn't use to spin down disk on
-      system halt (only synchronized caches).
-      Spin down on system halt is now implemented.  sysfs node
-      /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if
-      spin down support is available.
-      Because issuing spin down command to an already spun down disk
-      makes some disks spin up just to spin down again, libata tracks
-      device spindown status to skip the extra spindown command and
-      warn about it.
-      This is to give userspace tools the time to get updated and will
-      be removed after userspace is reasonably updated.
-Who:  Tejun Heo <htejun@gmail.com>
-
----------------------------
-
 What:	i386/x86_64 bzImage symlinks
 When:	April 2010
 
@@ -235,31 +246,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 ---------------------------
 
 What (Why):
-	- include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
-	  (superseded by xt_TOS/xt_tos target & match)
-
-	- "forwarding" header files like ipt_mac.h in
-	  include/linux/netfilter_ipv4/ and include/linux/netfilter_ipv6/
-
-	- xt_CONNMARK match revision 0
-	  (superseded by xt_CONNMARK match revision 1)
-
-	- xt_MARK target revisions 0 and 1
-	  (superseded by xt_MARK match revision 2)
-
-	- xt_connmark match revision 0
-	  (superseded by xt_connmark match revision 1)
-
-	- xt_conntrack match revision 0
-	  (superseded by xt_conntrack match revision 1)
-
-	- xt_iprange match revision 0,
-	  include/linux/netfilter_ipv4/ipt_iprange.h
-	  (superseded by xt_iprange match revision 1)
-
-	- xt_mark match revision 0
-	  (superseded by xt_mark match revision 1)
-
 	- xt_recent: the old ipt_recent proc dir
 	  (superseded by /proc/net/xt_recent)
 
@@ -394,15 +380,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 -----------------------------
 
-What:	obsolete generic irq defines and typedefs
-When:	2.6.30
-Why:	The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
-	have been kept around for migration reasons. After more than two years
-	it's time to remove them finally
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
 What:	fakephp and associated sysfs files in /sys/bus/pci/slots/
 When:	2011
 Why:	In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
@@ -451,16 +428,6 @@ Who:	Johannes Berg <johannes@sipsolutions.net>
 
 ----------------------------
 
-What:	CONFIG_X86_OLD_MCE
-When:	2.6.32
-Why:	Remove the old legacy 32bit machine check code. This has been
-	superseded by the newer machine check code from the 64bit port,
-	but the old version has been kept around for easier testing. Note this
-	doesn't impact the old P5 and WinChip machine check handlers.
-Who:	Andi Kleen <andi@firstfloor.org>
-
-----------------------------
-
 What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
 	exported interface anymore.
 When:	2.6.33
@@ -468,3 +435,27 @@ Why:	cpu_policy_rwsem has a new cleaner definition making it local to
 	cpufreq core and contained inside cpufreq.c. Other dependent
 	drivers should not use it in order to safely avoid lockdep issues.
 Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What:	sound-slot/service-* module aliases and related clutters in
+	sound/sound_core.c
+When:	August 2010
+Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+	(14) and requests modules using custom sound-slot/service-*
+	module aliases.  The only benefit of doing this is allowing
+	use of custom module aliases which might as well be considered
+	a bug at this point.  This preemptive claiming prevents
+	alternative OSS implementations.
+
+	Till the feature is removed, the kernel will be requesting
+	both sound-slot/service-* and the standard char-major-* module
+	aliases and allow turning off the pre-claiming selectively via
+	CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+	kernel parameter.
+
+	After the transition phase is complete, both the custom module
+	aliases and switches to disable it will go away.  This removal
+	will also allow making ALSA OSS emulation independent of
+	sound_core.  The dependency will be broken then too.
+Who:	Tejun Heo <tj@kernel.org>

Documentation/filesystems/ext4.txt

@@ -134,15 +134,9 @@ ro                   	Mount filesystem read only. Note that ext4 will
                      	mount options "ro,noload" can be used to prevent
 		     	writes to the filesystem.
 
-journal_checksum	Enable checksumming of the journal transactions.
-			This will allow the recovery code in e2fsck and the
-			kernel to detect corruption in the kernel.  It is a
-			compatible change and will be ignored by older kernels.
-
 journal_async_commit	Commit block can be written to disk without waiting
 			for descriptor blocks. If enabled older kernels cannot
-			mount the device. This will enable 'journal_checksum'
+			mount the device.
-			internally.
 
 journal=update		Update the ext4 file system's journal to the current
 			format.
@@ -263,10 +257,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
+quota			These options are ignored by the filesystem. They
-noquota
+noquota			are used only by quota tools to recognize volumes
-grpquota
+grpquota		where quota should be turned on. See documentation
-usrquota
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext4 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information

Documentation/filesystems/gfs2-uevents.txt

@@ -0,0 +1,100 @@
+                              uevents and GFS2
+                             ==================
+
+During the lifetime of a GFS2 mount, a number of uevents are generated.
+This document explains what the events are and what they are used
+for (by gfs_controld in gfs2-utils).
+
+A list of GFS2 uevents
+-----------------------
+
+1. ADD
+
+The ADD event occurs at mount time. It will always be the first
+uevent generated by the newly created filesystem. If the mount
+is successful, an ONLINE uevent will follow.  If it is not successful
+then a REMOVE uevent will follow.
+
+The ADD uevent has two environment variables: SPECTATOR=[0|1]
+and RDONLY=[0|1] that specify the spectator status (a read-only mount
+with no journal assigned), and read-only (with journal assigned) status
+of the filesystem respectively.
+
+2. ONLINE
+
+The ONLINE uevent is generated after a successful mount or remount. It
+has the same environment variables as the ADD uevent. The ONLINE
+uevent, along with the two environment variables for spectator and
+RDONLY are a relatively recent addition (2.6.32-rc+) and will not
+be generated by older kernels.
+
+3. CHANGE
+
+The CHANGE uevent is used in two places. One is when reporting the
+successful mount of the filesystem by the first node (FIRSTMOUNT=Done).
+This is used as a signal by gfs_controld that it is then ok for other
+nodes in the cluster to mount the filesystem.
+
+The other CHANGE uevent is used to inform of the completion
+of journal recovery for one of the filesystems journals. It has
+two environment variables, JID= which specifies the journal id which
+has just been recovered, and RECOVERY=[Done|Failed] to indicate the
+success (or otherwise) of the operation. These uevents are generated
+for every journal recovered, whether it is during the initial mount
+process or as the result of gfs_controld requesting a specific journal
+recovery via the /sys/fs/gfs2/<fsname>/lock_module/recovery file.
+
+Because the CHANGE uevent was used (in early versions of gfs_controld)
+without checking the environment variables to discover the state, we
+cannot add any more functions to it without running the risk of
+someone using an older version of the user tools and breaking their
+cluster. For this reason the ONLINE uevent was used when adding a new
+uevent for a successful mount or remount.
+
+4. OFFLINE
+
+The OFFLINE uevent is only generated due to filesystem errors and is used
+as part of the "withdraw" mechanism. Currently this doesn't give any
+information about what the error is, which is something that needs to
+be fixed.
+
+5. REMOVE
+
+The REMOVE uevent is generated at the end of an unsuccessful mount
+or at the end of a umount of the filesystem. All REMOVE uevents will
+have been preceeded by at least an ADD uevent for the same fileystem,
+and unlike the other uevents is generated automatically by the kernel's
+kobject subsystem.
+
+
+Information common to all GFS2 uevents (uevent environment variables)
+----------------------------------------------------------------------
+
+1. LOCKTABLE=
+
+The LOCKTABLE is a string, as supplied on the mount command
+line (locktable=) or via fstab. It is used as a filesystem label
+as well as providing the information for a lock_dlm mount to be
+able to join the cluster.
+
+2. LOCKPROTO=
+
+The LOCKPROTO is a string, and its value depends on what is set
+on the mount command line, or via fstab. It will be either
+lock_nolock or lock_dlm. In the future other lock managers
+may be supported.
+
+3. JOURNALID=
+
+If a journal is in use by the filesystem (journals are not
+assigned for spectator mounts) then this will give the
+numeric journal id in all GFS2 uevents.
+
+4. UUID=
+
+With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID
+into the filesystem superblock. If it exists, this will
+be included in every uevent relating to the filesystem.
+
+
+

Documentation/filesystems/nfs.txt

@@ -0,0 +1,98 @@
+
+The NFS client
+==============
+
+The NFS version 2 protocol was first documented in RFC1094 (March 1989).
+Since then two more major releases of NFS have been published, with NFSv3
+being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
+2003).
+
+The Linux NFS client currently supports all the above published versions,
+and work is in progress on adding support for minor version 1 of the NFSv4
+protocol.
+
+The purpose of this document is to provide information on some of the
+upcall interfaces that are used in order to provide the NFS client with
+some of the information that it requires in order to fully comply with
+the NFS spec.
+
+The DNS resolver
+================
+
+NFSv4 allows for one server to refer the NFS client to data that has been
+migrated onto another server by means of the special "fs_locations"
+attribute. See
+	http://tools.ietf.org/html/rfc3530#section-6
+and
+	http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+
+The fs_locations information can take the form of either an ip address and
+a path, or a DNS hostname and a path. The latter requires the NFS client to
+do a DNS lookup in order to mount the new volume, and hence the need for an
+upcall to allow userland to provide this service.
+
+Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
+/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
+
+   (1) The process checks the dns_resolve cache to see if it contains a
+       valid entry. If so, it returns that entry and exits.
+
+   (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
+       (may be changed using the 'nfs.cache_getent' kernel boot parameter)
+       is run, with two arguments:
+		- the cache name, "dns_resolve"
+		- the hostname to resolve
+
+   (3) After looking up the corresponding ip address, the helper script
+       writes the result into the rpc_pipefs pseudo-file
+       '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
+       in the following (text) format:
+
+		"<ip address> <hostname> <ttl>\n"
+
+       Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
+       (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
+       <hostname> is identical to the second argument of the helper
+       script, and <ttl> is the 'time to live' of this cache entry (in
+       units of seconds).
+
+       Note: If <ip address> is invalid, say the string "0", then a negative
+       entry is created, which will cause the kernel to treat the hostname
+       as having no valid DNS translation.
+
+
+
+
+A basic sample /sbin/nfs_cache_getent
+=====================================
+
+#!/bin/bash
+#
+ttl=600
+#
+cut=/usr/bin/cut
+getent=/usr/bin/getent
+rpc_pipefs=/var/lib/nfs/rpc_pipefs
+#
+die()
+{
+	echo "Usage: $0 cache_name entry_name"
+	exit 1
+}
+
+[ $# -lt 2 ] && die
+cachename="$1"
+cache_path=${rpc_pipefs}/cache/${cachename}/channel
+
+case "${cachename}" in
+	dns_resolve)
+		name="$2"
+		result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
+		[ -z "${result}" ] && result="0"
+		;;
+	*)
+		die
+		;;
+esac
+echo "${result} ${name} ${ttl}" >${cache_path}
+

Documentation/filesystems/seq_file.txt

@@ -46,7 +46,7 @@ better to do. The file is seekable, in that one can do something like the
 following:
 
     dd if=/proc/sequence of=out1 count=1
-    dd if=/proc/sequence skip=1 out=out2 count=1
+    dd if=/proc/sequence skip=1 of=out2 count=1
 
 Then concatenate the output files out1 and out2 and get the right
 result. Yes, it is a thoroughly useless module, but the point is to show

Documentation/flexible-arrays.txt

@@ -0,0 +1,99 @@
+Using flexible arrays in the kernel
+Last updated for 2.6.31
+Jonathan Corbet <corbet@lwn.net>
+
+Large contiguous memory allocations can be unreliable in the Linux kernel.
+Kernel programmers will sometimes respond to this problem by allocating
+pages with vmalloc().  This solution not ideal, though.  On 32-bit systems,
+memory from vmalloc() must be mapped into a relatively small address space;
+it's easy to run out.  On SMP systems, the page table changes required by
+vmalloc() allocations can require expensive cross-processor interrupts on
+all CPUs.  And, on all systems, use of space in the vmalloc() range
+increases pressure on the translation lookaside buffer (TLB), reducing the
+performance of the system.
+
+In many cases, the need for memory from vmalloc() can be eliminated by
+piecing together an array from smaller parts; the flexible array library
+exists to make this task easier.
+
+A flexible array holds an arbitrary (within limits) number of fixed-sized
+objects, accessed via an integer index.  Sparse arrays are handled
+reasonably well.  Only single-page allocations are made, so memory
+allocation failures should be relatively rare.  The down sides are that the
+arrays cannot be indexed directly, individual object size cannot exceed the
+system page size, and putting data into a flexible array requires a copy
+operation.  It's also worth noting that flexible arrays do no internal
+locking at all; if concurrent access to an array is possible, then the
+caller must arrange for appropriate mutual exclusion.
+
+The creation of a flexible array is done with:
+
+    #include <linux/flex_array.h>
+
+    struct flex_array *flex_array_alloc(int element_size,
+					unsigned int total,
+					gfp_t flags);
+
+The individual object size is provided by element_size, while total is the
+maximum number of objects which can be stored in the array.  The flags
+argument is passed directly to the internal memory allocation calls.  With
+the current code, using flags to ask for high memory is likely to lead to
+notably unpleasant side effects.
+
+Storing data into a flexible array is accomplished with a call to:
+
+    int flex_array_put(struct flex_array *array, unsigned int element_nr,
+    		       void *src, gfp_t flags);
+
+This call will copy the data from src into the array, in the position
+indicated by element_nr (which must be less than the maximum specified when
+the array was created).  If any memory allocations must be performed, flags
+will be used.  The return value is zero on success, a negative error code
+otherwise.
+
+There might possibly be a need to store data into a flexible array while
+running in some sort of atomic context; in this situation, sleeping in the
+memory allocator would be a bad thing.  That can be avoided by using
+GFP_ATOMIC for the flags value, but, often, there is a better way.  The
+trick is to ensure that any needed memory allocations are done before
+entering atomic context, using:
+
+    int flex_array_prealloc(struct flex_array *array, unsigned int start,
+			    unsigned int end, gfp_t flags);
+
+This function will ensure that memory for the elements indexed in the range
+defined by start and end has been allocated.  Thereafter, a
+flex_array_put() call on an element in that range is guaranteed not to
+block.
+
+Getting data back out of the array is done with:
+
+    void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
+
+The return value is a pointer to the data element, or NULL if that
+particular element has never been allocated.
+
+Note that it is possible to get back a valid pointer for an element which
+has never been stored in the array.  Memory for array elements is allocated
+one page at a time; a single allocation could provide memory for several
+adjacent elements.  The flexible array code does not know if a specific
+element has been written; it only knows if the associated memory is
+present.  So a flex_array_get() call on an element which was never stored
+in the array has the potential to return a pointer to random data.  If the
+caller does not have a separate way to know which elements were actually
+stored, it might be wise, at least, to add GFP_ZERO to the flags argument
+to ensure that all elements are zeroed.
+
+There is no way to remove a single element from the array.  It is possible,
+though, to remove all elements with a call to:
+
+    void flex_array_free_parts(struct flex_array *array);
+
+This call frees all elements, but leaves the array itself in place.
+Freeing the entire array is done with:
+
+    void flex_array_free(struct flex_array *array);
+
+As of this writing, there are no users of flexible arrays in the mainline
+kernel.  The functions described here are also not exported to modules;
+that will probably be fixed when somebody comes up with a need for it.

Documentation/hwmon/pcf8591

@@ -2,11 +2,11 @@ Kernel driver pcf8591
 =====================
 
 Supported chips:
-  * Philips PCF8591
+  * Philips/NXP PCF8591
     Prefix: 'pcf8591'
     Addresses scanned: I2C 0x48 - 0x4f
-    Datasheet: Publicly available at the Philips Semiconductor website
+    Datasheet: Publicly available at the NXP website
-               http://www.semiconductors.philips.com/pip/PCF8591P.html
+               http://www.nxp.com/pip/PCF8591_6.html
 
 Authors:
         Aurelien Jarno <aurelien@aurel32.net>
@@ -16,9 +16,10 @@ Authors:
 
 Description
 -----------
+
 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
-analog output) for the I2C bus produced by Philips Semiconductors. It
+analog output) for the I2C bus produced by Philips Semiconductors (now NXP).
-is designed to provide a byte I2C interface to up to 4 separate devices.
+It is designed to provide a byte I2C interface to up to 4 separate devices.
 
 The PCF8591 has 4 analog inputs programmable as single-ended or
 differential inputs :
@@ -58,8 +59,8 @@ Accessing PCF8591 via /sys interface
 -------------------------------------
 
 ! Be careful !
-The PCF8591 is plainly impossible to detect ! Stupid chip.
+The PCF8591 is plainly impossible to detect! Stupid chip.
-So every chip with address in the interval [48..4f] is
+So every chip with address in the interval [0x48..0x4f] is
 detected as PCF8591. If you have other chips in this address
 range, the workaround is to load this module after the one
 for your others chips.
@@ -67,19 +68,20 @@ for your others chips.
 On detection (i.e. insmod, modprobe et al.), directories are being
 created for each detected PCF8591:
 
-/sys/bus/devices/<0>-<1>/
+/sys/bus/i2c/devices/<0>-<1>/
 where <0> is the bus the chip was detected on (e. g. i2c-0)
 and <1> the chip address ([48..4f])
 
 Inside these directories, there are such files:
-in0, in1, in2, in3, out0_enable, out0_output, name
+in0_input, in1_input, in2_input, in3_input, out0_enable, out0_output, name
 
 Name contains chip name.
 
-The in0, in1, in2 and in3 files are RO. Reading gives the value of the
+The in0_input, in1_input, in2_input and in3_input files are RO. Reading gives
-corresponding channel. Depending on the current analog inputs configuration,
+the value of the corresponding channel. Depending on the current analog inputs
-files in2 and/or in3 do not exist. Values range are from 0 to 255 for single
+configuration, files in2_input and in3_input may not exist. Values range
-ended inputs and -128 to +127 for differential inputs (8-bit ADC).
+from 0 to 255 for single ended inputs and -128 to +127 for differential inputs
+(8-bit ADC).
 
 The out0_enable file is RW. Reading gives "1" for analog output enabled and
 "0" for analog output disabled. Writing accepts "0" and "1" accordingly.

Documentation/hwmon/tmp421

@@ -0,0 +1,36 @@
+Kernel driver tmp421
+====================
+
+Supported chips:
+  * Texas Instruments TMP421
+    Prefix: 'tmp421'
+    Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+  * Texas Instruments TMP422
+    Prefix: 'tmp422'
+    Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+  * Texas Instruments TMP423
+    Prefix: 'tmp423'
+    Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
+    Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html
+
+Authors:
+	Andre Prendel <andre.prendel@gmx.de>
+
+Description
+-----------
+
+This driver implements support for Texas Instruments TMP421, TMP422
+and TMP423 temperature sensor chips. These chips implement one local
+and up to one (TMP421), up to two (TMP422) or up to three (TMP423)
+remote sensors. Temperature is measured in degrees Celsius. The chips
+are wired over I2C/SMBus and specified over a temperature range of -40
+to +125 degrees Celsius. Resolution for both the local and remote
+channels is 0.0625 degree C.
+
+The chips support only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+temp[1-4]_input
+temp[2-4]_fault

Documentation/hwmon/wm831x

@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM831x PMICs
+    Prefix: 'wm831x'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8310
+	http://www.wolfsonmicro.com/products/WM8311
+	http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC.  Chip and battery temperatures
+are available.  The chip temperature is calculated as:
+
+	Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.

Documentation/hwmon/wm8350

@@ -0,0 +1,26 @@
+Kernel driver wm8350-hwmon
+==========================
+
+Supported chips:
+  * Wolfson Microelectronics WM835x PMICs
+    Prefix: 'wm8350'
+    Datasheet:
+	http://www.wolfsonmicro.com/products/WM8350
+	http://www.wolfsonmicro.com/products/WM8351
+	http://www.wolfsonmicro.com/products/WM8352
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM835x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system.  Currently the driver provides
+simple access to these major supplies.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC.  For the internal supplies the ADC
+is referenced to the system VRTC.

Documentation/input/sentelic.txt

@@ -0,0 +1,475 @@
+Copyright (C) 2002-2008 Sentelic Corporation.
+Last update: Oct-31-2008
+
+==============================================================================
+* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
+==============================================================================
+A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward
+   page (5th button)
+@1. Set sample rate to 200;
+@2. Set sample rate to 200;
+@3. Set sample rate to 80;
+@4. Issuing the "Get device ID" command (0xF2) and waits for the response;
+@5. FSP will respond 0x04.
+
+Packet 1
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |Y|X|y|x|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 | | |B|F|W|W|W|W|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7 => Y overflow
+        Bit6 => X overflow
+        Bit5 => Y sign bit
+        Bit4 => X sign bit
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X Movement(9-bit 2's complement integers)
+Byte 3: Y Movement(9-bit 2's complement integers)
+Byte 4: Bit3~Bit0 => the scrolling wheel's movement since the last data report.
+                     valid values, -8 ~ +7
+        Bit4 => 1 = 4th mouse button is pressed, Forward one page.
+                0 = 4th mouse button is not pressed.
+        Bit5 => 1 = 5th mouse button is pressed, Backward one page.
+                0 = 5th mouse button is not pressed.
+
+B) MSID 6: Horizontal and Vertical scrolling.
+@ Set bit 1 in register 0x40 to 1
+
+# FSP replaces scrolling wheel's movement as 4 bits to show horizontal and
+  vertical scrolling.
+
+Packet 1
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |Y|X|y|x|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 | | |B|F|l|r|u|d|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7 => Y overflow
+        Bit6 => X overflow
+        Bit5 => Y sign bit
+        Bit4 => X sign bit
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X Movement(9-bit 2's complement integers)
+Byte 3: Y Movement(9-bit 2's complement integers)
+Byte 4: Bit0 => the Vertical scrolling movement downward.
+	Bit1 => the Vertical scrolling movement upward.
+	Bit2 => the Vertical scrolling movement rightward.
+	Bit3 => the Vertical scrolling movement leftward.
+        Bit4 => 1 = 4th mouse button is pressed, Forward one page.
+                0 = 4th mouse button is not pressed.
+        Bit5 => 1 = 5th mouse button is pressed, Backward one page.
+                0 = 5th mouse button is not pressed.
+
+C) MSID 7:
+# FSP uses 2 packets(8 Bytes) data to represent Absolute Position
+  so we have PACKET NUMBER to identify packets.
+  If PACKET NUMBER is 0, the packet is Packet 1.
+  If PACKET NUMBER is 1, the packet is Packet 2.
+  Please count this number in program.
+
+# MSID6 special packet will be enable at the same time when enable MSID 7.
+
+==============================================================================
+* Absolute position for STL3886-G0.
+==============================================================================
+@ Set bit 2 or 3 in register 0x40 to 1
+@ Set bit 6 in register 0x40 to 1
+
+Packet 1 (ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|1|1|M|R|L|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |r|l|d|u|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => valid bit
+        Bit4 => 1
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit4 => scroll up
+        Bit5 => scroll down
+        Bit6 => scroll left
+        Bit7 => scroll right
+
+Notify Packet for G0
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |1|0|0|1|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |M|M|M|M|M|M|M|M|  4 |0|0|0|0|0|0|0|0|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => 0
+        Bit4 => 1
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message Type => 0x5A (Enable/Disable status packet)
+        Mode Type => 0xA5 (Normal/Icon mode status)
+Byte 3: Message Type => 0x00 (Disabled)
+                     => 0x01 (Enabled)
+        Mode Type    => 0x00 (Normal)
+                     => 0x01 (Icon)
+Byte 4: Bit7~Bit0 => Don't Care
+
+==============================================================================
+* Absolute position for STL3888-A0.
+==============================================================================
+Packet 1 (ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|A|1|L|0|1|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |x|x|y|y|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+                When both fingers are up, the last two reports have zero valid
+                bit.
+        Bit4 => arc
+        Bit3 => 1
+        Bit2 => Left Button, 1 is pressed, 0 is released.
+        Bit1 => 0
+        Bit0 => 1
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit5~Bit4 => y1_g
+        Bit7~Bit6 => x1_g
+
+Packet 2 (ABSOLUTE POSITION)
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |0|1|V|A|1|R|1|0|  2  |X|X|X|X|X|X|X|X|  3 |Y|Y|Y|Y|Y|Y|Y|Y|  4 |x|x|y|y|X|X|Y|Y|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordinates packet
+                  => 10, Notify packet
+        Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+                When both fingers are up, the last two reports have zero valid
+                bit.
+        Bit4 => arc
+        Bit3 => 1
+        Bit2 => Right Button, 1 is pressed, 0 is released.
+        Bit1 => 1
+        Bit0 => 0
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+        Bit3~Bit2 => X coordinate (ypos[1:0])
+        Bit5~Bit4 => y2_g
+        Bit7~Bit6 => x2_g
+
+Notify Packet for STL3888-A0
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |1|0|1|P|1|M|R|L|  2  |C|C|C|C|C|C|C|C|  3 |0|0|F|F|0|0|0|i|  4 |r|l|d|u|0|0|0|0|
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+                  => 01, Absolute coordination packet
+                  => 10, Notify packet
+        Bit5 => 1
+        Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
+                0: left button is generated by the on-pad command
+                1: left button is generated by the external button
+        Bit3 => 1
+        Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+        Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+        Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+Byte 3: Bit7~Bit6 => Don't care
+        Bit5~Bit4 => Number of fingers
+        Bit3~Bit1 => Reserved
+        Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+Byte 4: Bit7 => scroll right button
+        Bit6 => scroll left button
+        Bit5 => scroll down button
+        Bit4 => scroll up button
+            * Note that if gesture and additional button (Bit4~Bit7)
+	      happen at the same time, the button information will not
+	      be sent.
+        Bit3~Bit0 => Reserved
+
+Sample sequence of Multi-finger, Multi-coordinate mode:
+
+	notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
+	abs pkt 2, ..., notify packet(valid bit == 0)
+
+==============================================================================
+* FSP Enable/Disable packet
+==============================================================================
+   Bit 7 6 5 4 3 2 1 0       7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0      7 6 5 4 3 2 1 0
+BYTE  |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+  1   |Y|X|0|0|1|M|R|L|  2  |0|1|0|1|1|0|1|E|  3 | | | | | | | | |  4 | | | | | | | | |
+      |---------------|     |---------------|    |---------------|    |---------------|
+
+FSP will send out enable/disable packet when FSP receive PS/2 enable/disable
+command. Host will receive the packet which Middle, Right, Left button will
+be set. The packet only use byte 0 and byte 1 as a pattern of original packet.
+Ignore the other bytes of the packet.
+
+Byte 1: Bit7 => 0, Y overflow
+        Bit6 => 0, X overflow
+	Bit5 => 0, Y sign bit
+        Bit4 => 0, X sign bit
+	Bit3 => 1
+	Bit2 => 1, Middle Button
+        Bit1 => 1, Right Button
+        Bit0 => 1, Left Button
+Byte 2: Bit7~1 => (0101101b)
+        Bit0 => 1 = Enable
+		0 = Disable
+Byte 3: Don't care
+Byte 4: Don't care (MOUSE ID 3, 4)
+Byte 5~8: Don't care (Absolute packet)
+
+==============================================================================
+* PS/2 Command Set
+==============================================================================
+
+FSP supports basic PS/2 commanding set and modes, refer to following URL for
+details about PS/2 commands:
+
+http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface
+
+==============================================================================
+* Programming Sequence for Determining Packet Parsing Flow
+==============================================================================
+1. Identify FSP by reading device ID(0x00) and version(0x01) register
+
+2. Determine number of buttons by reading status2 (0x0b) register
+
+	buttons = reg[0x0b] & 0x30
+
+	if buttons == 0x30 or buttons == 0x20:
+		# two/four buttons
+		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
+		section A for packet parsing detail(ignore byte 4, bit ~ 7)
+	elif buttons == 0x10:
+		# 6 buttons
+		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
+		section B for packet parsing detail
+	elif buttons == 0x00:
+		# 6 buttons
+		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
+		section A for packet parsing detail
+
+==============================================================================
+* Programming Sequence for Register Reading/Writing
+==============================================================================
+
+Register inversion requirement:
+
+  Following values needed to be inverted(the '~' operator in C) before being
+sent to FSP:
+
+	0xe9, 0xee, 0xf2 and 0xff.
+
+Register swapping requirement:
+
+  Following values needed to have their higher 4 bits and lower 4 bits being
+swapped before being sent to FSP:
+
+	10, 20, 40, 60, 80, 100 and 200.
+
+Register reading sequence:
+
+	1. send 0xf3 PS/2 command to FSP;
+
+	2. send 0x66 PS/2 command to FSP;
+
+	3. send 0x88 PS/2 command to FSP;
+
+	4. send 0xf3 PS/2 command to FSP;
+
+	5. if the register address being to read is not required to be
+	inverted(refer to the 'Register inversion requirement' section),
+	goto step 6
+
+	5a. send 0x68 PS/2 command to FSP;
+
+	5b. send the inverted register address to FSP and goto step 8;
+
+	6. if the register address being to read is not required to be
+	swapped(refer to the 'Register swapping requirement' section),
+	goto step 7
+
+	6a. send 0xcc PS/2 command to FSP;
+
+	6b. send the swapped register address to FSP and goto step 8;
+
+	7. send 0x66 PS/2 command to FSP;
+
+	7a. send the original register address to FSP and goto step 8;
+
+	8. send 0xe9(status request) PS/2 command to FSP;
+
+	9. the response read from FSP should be the requested register value.
+
+Register writing sequence:
+
+	1. send 0xf3 PS/2 command to FSP;
+
+	2. if the register address being to write is not required to be
+	inverted(refer to the 'Register inversion requirement' section),
+	goto step 3
+
+	2a. send 0x74 PS/2 command to FSP;
+
+	2b. send the inverted register address to FSP and goto step 5;
+
+	3. if the register address being to write is not required to be
+	swapped(refer to the 'Register swapping requirement' section),
+	goto step 4
+
+	3a. send 0x77 PS/2 command to FSP;
+
+	3b. send the swapped register address to FSP and goto step 5;
+
+	4. send 0x55 PS/2 command to FSP;
+
+	4a. send the register address to FSP and goto step 5;
+
+	5. send 0xf3 PS/2 command to FSP;
+
+	6. if the register value being to write is not required to be
+	inverted(refer to the 'Register inversion requirement' section),
+	goto step 7
+
+	6a. send 0x47 PS/2 command to FSP;
+
+	6b. send the inverted register value to FSP and goto step 9;
+
+	7. if the register value being to write is not required to be
+	swapped(refer to the 'Register swapping requirement' section),
+	goto step 8
+
+	7a. send 0x44 PS/2 command to FSP;
+
+	7b. send the swapped register value to FSP and goto step 9;
+
+	8. send 0x33 PS/2 command to FSP;
+
+	8a. send the register value to FSP;
+
+	9. the register writing sequence is completed.
+
+==============================================================================
+* Register Listing
+==============================================================================
+
+offset	width		default	r/w	name
+0x00	bit7~bit0	0x01	RO	device ID
+
+0x01	bit7~bit0	0xc0	RW	version ID
+
+0x02	bit7~bit0	0x01	RO	vendor ID
+
+0x03	bit7~bit0	0x01	RO	product ID
+
+0x04	bit3~bit0	0x01	RW	revision ID
+
+0x0b				RO	test mode status 1
+	bit3		1	RO	0: rotate 180 degree, 1: no rotation
+
+	bit5~bit4		RO	number of buttons
+			11 => 2, lbtn/rbtn
+			10 => 4, lbtn/rbtn/scru/scrd
+			01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr
+			00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
+
+0x0f				RW	register file page control
+	bit0		0	RW	1 to enable page 1 register files
+
+0x10				RW	system control 1
+	bit0		1	RW	Reserved, must be 1
+	bit1		0	RW	Reserved, must be 0
+	bit4		1	RW	Reserved, must be 0
+	bit5		0	RW	register clock gating enable
+					0: read only, 1: read/write enable
+	(Note that following registers does not require clock gating being
+	enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
+	40 41 42 43.)
+
+0x31				RW	on-pad command detection
+	bit7		0	RW	on-pad command left button down tag
+					enable
+					0: disable, 1: enable
+
+0x34				RW	on-pad command control 5
+	bit4~bit0	0x05	RW	XLO in 0s/4/1, so 03h = 0010.1b = 2.5
+	(Note that position unit is in 0.5 scanline)
+
+	bit7		0	RW	on-pad tap zone enable
+					0: disable, 1: enable
+
+0x35				RW	on-pad command control 6
+	bit4~bit0	0x1d	RW	XHI in 0s/4/1, so 19h = 1100.1b = 12.5
+	(Note that position unit is in 0.5 scanline)
+
+0x36				RW	on-pad command control 7
+	bit4~bit0	0x04	RW	YLO in 0s/4/1, so 03h = 0010.1b = 2.5
+	(Note that position unit is in 0.5 scanline)
+
+0x37				RW	on-pad command control 8
+	bit4~bit0	0x13	RW	YHI in 0s/4/1, so 11h = 1000.1b = 8.5
+	(Note that position unit is in 0.5 scanline)
+
+0x40				RW	system control 5
+	bit1		0	RW	FSP Intellimouse mode enable
+					0: disable, 1: enable
+
+	bit2		0	RW	movement + abs. coordinate mode enable
+					0: disable, 1: enable
+	(Note that this function has the functionality of bit 1 even when
+	bit 1 is not set. However, the format is different from that of bit 1.
+	In addition, when bit 1 and bit 2 are set at the same time, bit 2 will
+	override bit 1.)
+
+	bit3		0	RW	abs. coordinate only mode enable
+					0: disable, 1: enable
+	(Note that this function has the functionality of bit 1 even when
+	bit 1 is not set. However, the format is different from that of bit 1.
+	In addition, when bit 1, bit 2 and bit 3 are set at the same time,
+	bit 3 will override bit 1 and 2.)
+
+	bit5		0	RW	auto switch enable
+					0: disable, 1: enable
+
+	bit6		0	RW	G0 abs. + notify packet format enable
+					0: disable, 1: enable
+	(Note that the absolute/relative coordinate output still depends on
+	bit 2 and 3.  That is, if any of those bit is 1, host will receive
+	absolute coordinates; otherwise, host only receives packets with
+	relative coordinate.)
+
+0x43				RW	on-pad control
+	bit0		0	RW	on-pad control enable
+					0: disable, 1: enable
+	(Note that if this bit is cleared, bit 3/5 will be ineffective)
+
+	bit3		0	RW	on-pad fix vertical scrolling enable
+					0: disable, 1: enable
+
+	bit5		0	RW	on-pad fix horizontal scrolling enable
+					0: disable, 1: enable

Documentation/intel_txt.txt

@@ -0,0 +1,210 @@
+Intel(R) TXT Overview:
+=====================
+
+Intel's technology for safer computing, Intel(R) Trusted Execution
+Technology (Intel(R) TXT), defines platform-level enhancements that
+provide the building blocks for creating trusted platforms.
+
+Intel TXT was formerly known by the code name LaGrande Technology (LT).
+
+Intel TXT in Brief:
+o  Provides dynamic root of trust for measurement (DRTM)
+o  Data protection in case of improper shutdown
+o  Measurement and verification of launched environment
+
+Intel TXT is part of the vPro(TM) brand and is also available some
+non-vPro systems.  It is currently available on desktop systems
+based on the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell
+Optiplex 755, HP dc7800, etc.) and mobile systems based on the GM45,
+PM45, and GS45 Express chipsets.
+
+For more information, see http://www.intel.com/technology/security/.
+This site also has a link to the Intel TXT MLE Developers Manual,
+which has been updated for the new released platforms.
+
+Intel TXT has been presented at various events over the past few
+years, some of which are:
+      LinuxTAG 2008:
+          http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag/
+          details.html?talkid=110
+      TRUST2008:
+          http://www.trust2008.eu/downloads/Keynote-Speakers/
+          3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
+      IDF 2008, Shanghai:
+          http://inteldeveloperforum.com.edgesuite.net/shanghai_2008/
+          aep/PROS003/index.html
+      IDFs 2006, 2007 (I'm not sure if/where they are online)
+
+Trusted Boot Project Overview:
+=============================
+
+Trusted Boot (tboot) is an open source, pre- kernel/VMM module that
+uses Intel TXT to perform a measured and verified launch of an OS
+kernel/VMM.
+
+It is hosted on SourceForge at http://sourceforge.net/projects/tboot.
+The mercurial source repo is available at http://www.bughost.org/
+repos.hg/tboot.hg.
+
+Tboot currently supports launching Xen (open source VMM/hypervisor
+w/ TXT support since v3.2), and now Linux kernels.
+
+
+Value Proposition for Linux or "Why should you care?"
+=====================================================
+
+While there are many products and technologies that attempt to
+measure or protect the integrity of a running kernel, they all
+assume the kernel is "good" to begin with.  The Integrity
+Measurement Architecture (IMA) and Linux Integrity Module interface
+are examples of such solutions.
+
+To get trust in the initial kernel without using Intel TXT, a
+static root of trust must be used.  This bases trust in BIOS
+starting at system reset and requires measurement of all code
+executed between system reset through the completion of the kernel
+boot as well as data objects used by that code.  In the case of a
+Linux kernel, this means all of BIOS, any option ROMs, the
+bootloader and the boot config.  In practice, this is a lot of
+code/data, much of which is subject to change from boot to boot
+(e.g. changing NICs may change option ROMs).  Without reference
+hashes, these measurement changes are difficult to assess or
+confirm as benign.  This process also does not provide DMA
+protection, memory configuration/alias checks and locks, crash
+protection, or policy support.
+
+By using the hardware-based root of trust that Intel TXT provides,
+many of these issues can be mitigated.  Specifically: many
+pre-launch components can be removed from the trust chain, DMA
+protection is provided to all launched components, a large number
+of platform configuration checks are performed and values locked,
+protection is provided for any data in the event of an improper
+shutdown, and there is support for policy-based execution/verification.
+This provides a more stable measurement and a higher assurance of
+system configuration and initial state than would be otherwise
+possible.  Since the tboot project is open source, source code for
+almost all parts of the trust chain is available (excepting SMM and
+Intel-provided firmware).
+
+How Does it Work?
+=================
+
+o  Tboot is an executable that is launched by the bootloader as
+   the "kernel" (the binary the bootloader executes).
+o  It performs all of the work necessary to determine if the
+   platform supports Intel TXT and, if so, executes the GETSEC[SENTER]
+   processor instruction that initiates the dynamic root of trust.
+   -  If tboot determines that the system does not support Intel TXT
+      or is not configured correctly (e.g. the SINIT AC Module was
+      incorrect), it will directly launch the kernel with no changes
+      to any state.
+   -  Tboot will output various information about its progress to the
+      terminal, serial port, and/or an in-memory log; the output
+      locations can be configured with a command line switch.
+o  The GETSEC[SENTER] instruction will return control to tboot and
+   tboot then verifies certain aspects of the environment (e.g. TPM NV
+   lock, e820 table does not have invalid entries, etc.).
+o  It will wake the APs from the special sleep state the GETSEC[SENTER]
+   instruction had put them in and place them into a wait-for-SIPI
+   state.
+   -  Because the processors will not respond to an INIT or SIPI when
+      in the TXT environment, it is necessary to create a small VT-x
+      guest for the APs.  When they run in this guest, they will
+      simply wait for the INIT-SIPI-SIPI sequence, which will cause
+      VMEXITs, and then disable VT and jump to the SIPI vector.  This
+      approach seemed like a better choice than having to insert
+      special code into the kernel's MP wakeup sequence.
+o  Tboot then applies an (optional) user-defined launch policy to
+   verify the kernel and initrd.
+   -  This policy is rooted in TPM NV and is described in the tboot
+      project.  The tboot project also contains code for tools to
+      create and provision the policy.
+   -  Policies are completely under user control and if not present
+      then any kernel will be launched.
+   -  Policy action is flexible and can include halting on failures
+      or simply logging them and continuing.
+o  Tboot adjusts the e820 table provided by the bootloader to reserve
+   its own location in memory as well as to reserve certain other
+   TXT-related regions.
+o  As part of it's launch, tboot DMA protects all of RAM (using the
+   VT-d PMRs).  Thus, the kernel must be booted with 'intel_iommu=on'
+   in order to remove this blanket protection and use VT-d's
+   page-level protection.
+o  Tboot will populate a shared page with some data about itself and
+   pass this to the Linux kernel as it transfers control.
+   -  The location of the shared page is passed via the boot_params
+      struct as a physical address.
+o  The kernel will look for the tboot shared page address and, if it
+   exists, map it.
+o  As one of the checks/protections provided by TXT, it makes a copy
+   of the VT-d DMARs in a DMA-protected region of memory and verifies
+   them for correctness.  The VT-d code will detect if the kernel was
+   launched with tboot and use this copy instead of the one in the
+   ACPI table.
+o  At this point, tboot and TXT are out of the picture until a
+   shutdown (S<n>)
+o  In order to put a system into any of the sleep states after a TXT
+   launch, TXT must first be exited.  This is to prevent attacks that
+   attempt to crash the system to gain control on reboot and steal
+   data left in memory.
+   -  The kernel will perform all of its sleep preparation and
+      populate the shared page with the ACPI data needed to put the
+      platform in the desired sleep state.
+   -  Then the kernel jumps into tboot via the vector specified in the
+      shared page.
+   -  Tboot will clean up the environment and disable TXT, then use the
+      kernel-provided ACPI information to actually place the platform
+      into the desired sleep state.
+   -  In the case of S3, tboot will also register itself as the resume
+      vector.  This is necessary because it must re-establish the
+      measured environment upon resume.  Once the TXT environment
+      has been restored, it will restore the TPM PCRs and then
+      transfer control back to the kernel's S3 resume vector.
+      In order to preserve system integrity across S3, the kernel
+      provides tboot with a set of memory ranges (kernel
+      code/data/bss, S3 resume code, and AP trampoline) that tboot
+      will calculate a MAC (message authentication code) over and then
+      seal with the TPM.  On resume and once the measured environment
+      has been re-established, tboot will re-calculate the MAC and
+      verify it against the sealed value.  Tboot's policy determines
+      what happens if the verification fails.
+
+That's pretty much it for TXT support.
+
+
+Configuring the System:
+======================
+
+This code works with 32bit, 32bit PAE, and 64bit (x86_64) kernels.
+
+In BIOS, the user must enable:  TPM, TXT, VT-x, VT-d.  Not all BIOSes
+allow these to be individually enabled/disabled and the screens in
+which to find them are BIOS-specific.
+
+grub.conf needs to be modified as follows:
+        title Linux 2.6.29-tip w/ tboot
+          root (hd0,0)
+                kernel /tboot.gz logging=serial,vga,memory
+                module /vmlinuz-2.6.29-tip intel_iommu=on ro
+                       root=LABEL=/ rhgb console=ttyS0,115200 3
+                module /initrd-2.6.29-tip.img
+                module /Q35_SINIT_17.BIN
+
+The kernel option for enabling Intel TXT support is found under the
+Security top-level menu and is called "Enable Intel(R) Trusted
+Execution Technology (TXT)".  It is marked as EXPERIMENTAL and
+depends on the generic x86 support (to allow maximum flexibility in
+kernel build options), since the tboot code will detect whether the
+platform actually supports Intel TXT and thus whether any of the
+kernel code is executed.
+
+The Q35_SINIT_17.BIN file is what Intel TXT refers to as an
+Authenticated Code Module.  It is specific to the chipset in the
+system and can also be found on the Trusted Boot site.  It is an
+(unencrypted) module signed by Intel that is used as part of the
+DRTM process to verify and configure the system.  It is signed
+because it operates at a higher privilege level in the system than
+any other macrocode and its correct operation is critical to the
+establishment of the DRTM.  The process for determining the correct
+SINIT ACM for a system is documented in the SINIT-guide.txt file
+that is on the tboot SourceForge site under the SINIT ACM downloads.

Documentation/ioctl/ioctl-number.txt

@@ -121,6 +121,7 @@ Code	Seq#	Include File		Comments
 'c'	00-7F	linux/comstats.h	conflict!
 'c'	00-7F	linux/coda.h		conflict!
 'c'	80-9F	arch/s390/include/asm/chsc.h
+'c'	A0-AF   arch/x86/include/asm/msr.h
 'd'	00-FF	linux/char/drm/drm/h	conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
@@ -192,7 +193,7 @@ Code	Seq#	Include File		Comments
 0xAD	00	Netfilter device	in development:
 					<mailto:rusty@rustcorp.com.au>	
 0xAE	all	linux/kvm.h		Kernel-based Virtual Machine
-					<mailto:kvm-devel@lists.sourceforge.net>
+					<mailto:kvm@vger.kernel.org>
 0xB0	all	RATIO devices		in development:
 					<mailto:vgo@ratio.de>
 0xB1	00-1F	PPPoX			<mailto:mostrows@styx.uwaterloo.ca>

Documentation/kernel-doc-nano-HOWTO.txt

@@ -66,7 +66,9 @@ Example kernel-doc function comment:
  * The longer description can have multiple paragraphs.
  */
 
-The first line, with the short description, must be on a single line.
+The short description following the subject can span multiple lines
+and ends with an @argument description, an empty line or the end of
+the comment block.
 
 The @argument descriptions must begin on the very next line following
 this opening short function description line, with no intervening

Documentation/kernel-parameters.txt

@@ -57,6 +57,7 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
+	KVM	Kernel Virtual Machine support is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -1098,6 +1099,44 @@ and is between 256 and 4096 characters. It is defined in the file
 	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
+	kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
+			Default is 0 (don't ignore, but inject #GP)
+
+	kvm.oos_shadow=	[KVM] Disable out-of-sync shadow paging.
+			Default is 1 (enabled)
+
+	kvm-amd.nested=	[KVM,AMD] Allow nested virtualization in KVM/SVM.
+			Default is 0 (off)
+
+	kvm-amd.npt=	[KVM,AMD] Disable nested paging (virtualized MMU)
+			for all guests.
+			Default is 1 (enabled) if in 64bit or 32bit-PAE mode
+
+	kvm-intel.bypass_guest_pf=
+			[KVM,Intel] Disables bypassing of guest page faults
+			on Intel chips. Default is 1 (enabled)
+
+	kvm-intel.ept=	[KVM,Intel] Disable extended page tables
+			(virtualized MMU) support on capable Intel chips.
+			Default is 1 (enabled)
+
+	kvm-intel.emulate_invalid_guest_state=
+			[KVM,Intel] Enable emulation of invalid guest states
+			Default is 0 (disabled)
+
+	kvm-intel.flexpriority=
+			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
+			Default is 1 (enabled)
+
+	kvm-intel.unrestricted_guest=
+			[KVM,Intel] Disable unrestricted guest feature
+			(virtualized real and unpaged mode) on capable
+			Intel chips. Default is 1 (enabled)
+
+	kvm-intel.vpid=	[KVM,Intel] Disable Virtual Processor Identification
+			feature (tagged TLBs) on capable Intel chips.
+			Default is 1 (enabled)
+
 	l2cr=		[PPC]
 
 	l3cr=		[PPC]
@@ -1247,6 +1286,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
 
+	machtype=	[Loongson] Share the same kernel image file between different
+			 yeeloong laptop.
+			Example: machtype=lemote-yeeloong-2f-7inch
+
 	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
 			than or equal to this physical address is ignored.
 
@@ -1503,6 +1546,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
 
+	nfs.cache_getent=
+			[NFS] sets the pathname to the program which is used
+			to update the NFS client cache entries.
+
+	nfs.cache_getent_timeout=
+			[NFS] sets the timeout after which an attempt to
+			update a cache entry is deemed to have failed.
+
 	nfs.idmap_cache_timeout=
 			[NFS] set the maximum lifetime for idmapper cache
 			entries.
@@ -1514,7 +1565,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
-	nmi_debug=	[KNL,AVR32] Specify one or more actions to take
+	nmi_debug=	[KNL,AVR32,SH] Specify one or more actions to take
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
@@ -1535,6 +1586,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			symbolic names: lapic and ioapic
 			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
 
+	netpoll.carrier_timeout=
+			[NET] Specifies amount of time (in seconds) that
+			netpoll should wait for a carrier. By default netpoll
+			waits 4 seconds.
+
 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
 			emulation library even if a 387 maths coprocessor
 			is present.
@@ -1919,11 +1975,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
-	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+	percpu_alloc=	Select which percpu first chunk allocator to use.
-			Allowed values are one of "lpage", "embed" and "4k".
+			Currently supported values are "embed" and "page".
-			See comments in arch/x86/kernel/setup_percpu.c for
+			Archs may support subset or none of the	selections.
-			details on each allocator.  This parameter is primarily
+			See comments in mm/percpu.c for details on each
-			for debugging and performance comparison.
+			allocator.  This parameter is primarily	for debugging
+			and performance comparison.
 
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
@@ -2395,6 +2452,18 @@ and is between 256 and 4096 characters. It is defined in the file
 	stifb=		[HW]
 			Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
+	sunrpc.min_resvport=
+	sunrpc.max_resvport=
+			[NFS,SUNRPC]
+			SunRPC servers often require that client requests
+			originate from a privileged port (i.e. a port in the
+			range 0 < portnr < 1024).
+			An administrator who wishes to reserve some of these
+			ports for other uses may adjust the range that the
+			kernel's sunrpc client considers to be privileged
+			using these two parameters to set the minimum and
+			maximum port values.
+
 	sunrpc.pool_mode=
 			[NFS]
 			Control how the NFS server code allocates CPUs to
@@ -2411,6 +2480,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			pernode	    one pool for each NUMA node (equivalent
 				    to global on non-NUMA machines)
 
+	sunrpc.tcp_slot_table_entries=
+	sunrpc.udp_slot_table_entries=
+			[NFS,SUNRPC]
+			Sets the upper limit on the number of simultaneous
+			RPC calls that can be sent from the client to a
+			server. Increasing these values may allow you to
+			improve throughput, but will also increase the
+			amount of memory reserved for use by the client.
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
@@ -2480,6 +2558,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	trace_buf_size=nn[KMG]
 			[FTRACE] will set tracing buffer size.
 
+	trace_event=[event-list]
+			[FTRACE] Set and start specified trace events in order
+			to facilitate early boot debugging.
+			See also Documentation/trace/events.txt
+
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>

Documentation/keys.txt

@@ -26,7 +26,7 @@ This document has the following sections:
 	- Notes on accessing payload contents
 	- Defining a key type
 	- Request-key callback service
-	- Key access filesystem
+	- Garbage collection
 
 
 ============
@@ -113,6 +113,9 @@ Each key has a number of attributes:
 
      (*) Dead. The key's type was unregistered, and so the key is now useless.
 
+Keys in the last three states are subject to garbage collection.  See the
+section on "Garbage collection".
+
 
 ====================
 KEY SERVICE OVERVIEW
@@ -754,6 +757,26 @@ The keyctl syscall functions are:
      successful.
 
 
+ (*) Install the calling process's session keyring on its parent.
+
+	long keyctl(KEYCTL_SESSION_TO_PARENT);
+
+     This functions attempts to install the calling process's session keyring
+     on to the calling process's parent, replacing the parent's current session
+     keyring.
+
+     The calling process must have the same ownership as its parent, the
+     keyring must have the same ownership as the calling process, the calling
+     process must have LINK permission on the keyring and the active LSM module
+     mustn't deny permission, otherwise error EPERM will be returned.
+
+     Error ENOMEM will be returned if there was insufficient memory to complete
+     the operation, otherwise 0 will be returned to indicate success.
+
+     The keyring will be replaced next time the parent process leaves the
+     kernel and resumes executing userspace.
+
+
 ===============
 KERNEL SERVICES
 ===============
@@ -1231,3 +1254,17 @@ by executing:
 
 In this case, the program isn't required to actually attach the key to a ring;
 the rings are provided for reference.
+
+
+==================
+GARBAGE COLLECTION
+==================
+
+Dead keys (for which the type has been removed) will be automatically unlinked
+from those keyrings that point to them and deleted as soon as possible by a
+background garbage collector.
+
+Similarly, revoked and expired keys will be garbage collected, but only after a
+certain amount of time has passed.  This time is set as a number of seconds in:
+
+	/proc/sys/kernel/keys/gc_delay

Documentation/kmemleak.txt

@@ -27,6 +27,13 @@ To trigger an intermediate memory scan:
 
   # echo scan > /sys/kernel/debug/kmemleak
 
+To clear the list of all current possible memory leaks:
+
+  # echo clear > /sys/kernel/debug/kmemleak
+
+New leaks will then come up upon reading /sys/kernel/debug/kmemleak
+again.
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -42,6 +49,9 @@ Memory scanning parameters can be modified at run-time by writing to the
   scan=<secs>	- set the automatic memory scanning period in seconds
 		  (default 600, 0 to stop the automatic scanning)
   scan		- trigger a memory scan
+  clear		- clear list of current memory leak suspects, done by
+		  marking all current reported unreferenced objects grey
+  dump=<addr>	- dump information about the object found at <addr>
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
@@ -86,6 +96,27 @@ avoid this, kmemleak can also store the number of values pointing to an
 address inside the block address range that need to be found so that the
 block is not considered a leak. One example is __vmalloc().
 
+Testing specific sections with kmemleak
+---------------------------------------
+
+Upon initial bootup your /sys/kernel/debug/kmemleak output page may be
+quite extensive. This can also be the case if you have very buggy code
+when doing development. To work around these situations you can use the
+'clear' command to clear all reported unreferenced objects from the
+/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear'
+you can find new unreferenced objects; this should help with testing
+specific sections of code.
+
+To test a critical section on demand with a clean kmemleak do:
+
+  # echo clear > /sys/kernel/debug/kmemleak
+  ... test your kernel or modules ...
+  # echo scan > /sys/kernel/debug/kmemleak
+
+Then as usual to get your report with:
+
+  # cat /sys/kernel/debug/kmemleak
+
 Kmemleak API
 ------------
 

Documentation/kref.txt

@@ -84,7 +84,6 @@ int my_data_handler(void)
 	task = kthread_run(more_data_handling, data, "more_data_handling");
 	if (task == ERR_PTR(-ENOMEM)) {
 		rv = -ENOMEM;
-	        kref_put(&data->refcount, data_release);
 		goto out;
 	}
 

Documentation/kvm/api.txt

@@ -0,0 +1,759 @@
+The Definitive KVM (Kernel-based Virtual Machine) API Documentation
+===================================================================
+
+1. General description
+
+The kvm API is a set of ioctls that are issued to control various aspects
+of a virtual machine.  The ioctls belong to three classes
+
+ - System ioctls: These query and set global attributes which affect the
+   whole kvm subsystem.  In addition a system ioctl is used to create
+   virtual machines
+
+ - VM ioctls: These query and set attributes that affect an entire virtual
+   machine, for example memory layout.  In addition a VM ioctl is used to
+   create virtual cpus (vcpus).
+
+   Only run VM ioctls from the same process (address space) that was used
+   to create the VM.
+
+ - vcpu ioctls: These query and set attributes that control the operation
+   of a single virtual cpu.
+
+   Only run vcpu ioctls from the same thread that was used to create the
+   vcpu.
+
+2. File descritpors
+
+The kvm API is centered around file descriptors.  An initial
+open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
+can be used to issue system ioctls.  A KVM_CREATE_VM ioctl on this
+handle will create a VM file descripror which can be used to issue VM
+ioctls.  A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
+and return a file descriptor pointing to it.  Finally, ioctls on a vcpu
+fd can be used to control the vcpu, including the important task of
+actually running guest code.
+
+In general file descriptors can be migrated among processes by means
+of fork() and the SCM_RIGHTS facility of unix domain socket.  These
+kinds of tricks are explicitly not supported by kvm.  While they will
+not cause harm to the host, their actual behavior is not guaranteed by
+the API.  The only supported use is one virtual machine per process,
+and one vcpu per thread.
+
+3. Extensions
+
+As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
+incompatible change are allowed.  However, there is an extension
+facility that allows backward-compatible extensions to the API to be
+queried and used.
+
+The extension mechanism is not based on on the Linux version number.
+Instead, kvm defines extension identifiers and a facility to query
+whether a particular extension identifier is available.  If it is, a
+set of ioctls is available for application use.
+
+4. API description
+
+This section describes ioctls that can be used to control kvm guests.
+For each ioctl, the following information is provided along with a
+description:
+
+  Capability: which KVM extension provides this ioctl.  Can be 'basic',
+      which means that is will be provided by any kernel that supports
+      API version 12 (see section 4.1), or a KVM_CAP_xyz constant, which
+      means availability needs to be checked with KVM_CHECK_EXTENSION
+      (see section 4.4).
+
+  Architectures: which instruction set architectures provide this ioctl.
+      x86 includes both i386 and x86_64.
+
+  Type: system, vm, or vcpu.
+
+  Parameters: what parameters are accepted by the ioctl.
+
+  Returns: the return value.  General error numbers (EBADF, ENOMEM, EINVAL)
+      are not detailed, but errors with specific meanings are.
+
+4.1 KVM_GET_API_VERSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: the constant KVM_API_VERSION (=12)
+
+This identifies the API version as the stable kvm API. It is not
+expected that this number will change.  However, Linux 2.6.20 and
+2.6.21 report earlier versions; these are not documented and not
+supported.  Applications should refuse to run if KVM_GET_API_VERSION
+returns a value other than 12.  If this check passes, all ioctls
+described as 'basic' will be available.
+
+4.2 KVM_CREATE_VM
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: a VM fd that can be used to control the new virtual machine.
+
+The new VM has no virtual cpus and no memory.  An mmap() of a VM fd
+will access the virtual machine's physical address space; offset zero
+corresponds to guest physical address zero.  Use of mmap() on a VM fd
+is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is
+available.
+
+4.3 KVM_GET_MSR_INDEX_LIST
+
+Capability: basic
+Architectures: x86
+Type: system
+Parameters: struct kvm_msr_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+  E2BIG:     the msr index list is to be to fit in the array specified by
+             the user.
+
+struct kvm_msr_list {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 indices[0];
+};
+
+This ioctl returns the guest msrs that are supported.  The list varies
+by kvm version and host processor, but does not change otherwise.  The
+user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in
+the indices array with their numbers.
+
+4.4 KVM_CHECK_EXTENSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: extension identifier (KVM_CAP_*)
+Returns: 0 if unsupported; 1 (or some other positive integer) if supported
+
+The API allows the application to query about extensions to the core
+kvm API.  Userspace passes an extension identifier (an integer) and
+receives an integer that describes the extension availability.
+Generally 0 means no and 1 means yes, but some extensions may report
+additional information in the integer return value.
+
+4.5 KVM_GET_VCPU_MMAP_SIZE
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: size of vcpu mmap area, in bytes
+
+The KVM_RUN ioctl (cf.) communicates with userspace via a shared
+memory region.  This ioctl returns the size of that region.  See the
+KVM_RUN documentation for details.
+
+4.6 KVM_SET_MEMORY_REGION
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_memory_region (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_memory_region {
+	__u32 slot;
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size; /* bytes */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES  1UL
+
+This ioctl allows the user to create or modify a guest physical memory
+slot.  When changing an existing slot, it may be moved in the guest
+physical memory space, or its flags may be modified.  It may not be
+resized.  Slots may not overlap.
+
+The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
+instructs kvm to keep track of writes to memory within the slot.  See
+the KVM_GET_DIRTY_LOG ioctl.
+
+It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead
+of this API, if available.  This newer API allows placing guest memory
+at specified locations in the host address space, yielding better
+control and easy access.
+
+4.6 KVM_CREATE_VCPU
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: vcpu id (apic id on x86)
+Returns: vcpu fd on success, -1 on error
+
+This API adds a vcpu to a virtual machine.  The vcpu id is a small integer
+in the range [0, max_vcpus).
+
+4.7 KVM_GET_DIRTY_LOG (vm ioctl)
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_dirty_log (in/out)
+Returns: 0 on success, -1 on error
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+	__u32 slot;
+	__u32 padding;
+	union {
+		void __user *dirty_bitmap; /* one bit per page */
+		__u64 padding;
+	};
+};
+
+Given a memory slot, return a bitmap containing any pages dirtied
+since the last call to this ioctl.  Bit 0 is the first page in the
+memory slot.  Ensure the entire structure is cleared to avoid padding
+issues.
+
+4.8 KVM_SET_MEMORY_ALIAS
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_memory_alias (in)
+Returns: 0 (success), -1 (error)
+
+struct kvm_memory_alias {
+	__u32 slot;  /* this has a different namespace than memory slots */
+	__u32 flags;
+	__u64 guest_phys_addr;
+	__u64 memory_size;
+	__u64 target_phys_addr;
+};
+
+Defines a guest physical address space region as an alias to another
+region.  Useful for aliased address, for example the VGA low memory
+window. Should not be used with userspace memory.
+
+4.9 KVM_RUN
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+Errors:
+  EINTR:     an unmasked signal is pending
+
+This ioctl is used to run a guest virtual cpu.  While there are no
+explicit parameters, there is an implicit parameter block that can be
+obtained by mmap()ing the vcpu fd at offset 0, with the size given by
+KVM_GET_VCPU_MMAP_SIZE.  The parameter block is formatted as a 'struct
+kvm_run' (see below).
+
+4.10 KVM_GET_REGS
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_regs (out)
+Returns: 0 on success, -1 on error
+
+Reads the general purpose registers from the vcpu.
+
+/* x86 */
+struct kvm_regs {
+	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+	__u64 rax, rbx, rcx, rdx;
+	__u64 rsi, rdi, rsp, rbp;
+	__u64 r8,  r9,  r10, r11;
+	__u64 r12, r13, r14, r15;
+	__u64 rip, rflags;
+};
+
+4.11 KVM_SET_REGS
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_regs (in)
+Returns: 0 on success, -1 on error
+
+Writes the general purpose registers into the vcpu.
+
+See KVM_GET_REGS for the data structure.
+
+4.12 KVM_GET_SREGS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (out)
+Returns: 0 on success, -1 on error
+
+Reads special registers from the vcpu.
+
+/* x86 */
+struct kvm_sregs {
+	struct kvm_segment cs, ds, es, fs, gs, ss;
+	struct kvm_segment tr, ldt;
+	struct kvm_dtable gdt, idt;
+	__u64 cr0, cr2, cr3, cr4, cr8;
+	__u64 efer;
+	__u64 apic_base;
+	__u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+interrupt_bitmap is a bitmap of pending external interrupts.  At most
+one bit may be set.  This interrupt has been acknowledged by the APIC
+but not yet injected into the cpu core.
+
+4.13 KVM_SET_SREGS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (in)
+Returns: 0 on success, -1 on error
+
+Writes special registers into the vcpu.  See KVM_GET_SREGS for the
+data structures.
+
+4.14 KVM_TRANSLATE
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_translation (in/out)
+Returns: 0 on success, -1 on error
+
+Translates a virtual address according to the vcpu's current address
+translation mode.
+
+struct kvm_translation {
+	/* in */
+	__u64 linear_address;
+
+	/* out */
+	__u64 physical_address;
+	__u8  valid;
+	__u8  writeable;
+	__u8  usermode;
+	__u8  pad[5];
+};
+
+4.15 KVM_INTERRUPT
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Queues a hardware interrupt vector to be injected.  This is only
+useful if in-kernel local APIC is not used.
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+	/* in */
+	__u32 irq;
+};
+
+Note 'irq' is an interrupt vector, not an interrupt pin or line.
+
+4.16 KVM_DEBUG_GUEST
+
+Capability: basic
+Architectures: none
+Type: vcpu ioctl
+Parameters: none)
+Returns: -1 on error
+
+Support for this has been removed.  Use KVM_SET_GUEST_DEBUG instead.
+
+4.17 KVM_GET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in/out)
+Returns: 0 on success, -1 on error
+
+Reads model-specific registers from the vcpu.  Supported msr indices can
+be obtained using KVM_GET_MSR_INDEX_LIST.
+
+struct kvm_msrs {
+	__u32 nmsrs; /* number of msrs in entries */
+	__u32 pad;
+
+	struct kvm_msr_entry entries[0];
+};
+
+struct kvm_msr_entry {
+	__u32 index;
+	__u32 reserved;
+	__u64 data;
+};
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array) and the 'index' member of each array entry.
+kvm will fill in the 'data' member.
+
+4.18 KVM_SET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in)
+Returns: 0 on success, -1 on error
+
+Writes model-specific registers to the vcpu.  See KVM_GET_MSRS for the
+data structures.
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array), and the 'index' and 'data' members of each
+array entry.
+
+4.19 KVM_SET_CPUID
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_cpuid (in)
+Returns: 0 on success, -1 on error
+
+Defines the vcpu responses to the cpuid instruction.  Applications
+should use the KVM_SET_CPUID2 ioctl if available.
+
+
+struct kvm_cpuid_entry {
+	__u32 function;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry entries[0];
+};
+
+4.20 KVM_SET_SIGNAL_MASK
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_signal_mask (in)
+Returns: 0 on success, -1 on error
+
+Defines which signals are blocked during execution of KVM_RUN.  This
+signal mask temporarily overrides the threads signal mask.  Any
+unblocked signal received (except SIGKILL and SIGSTOP, which retain
+their traditional behaviour) will cause KVM_RUN to return with -EINTR.
+
+Note the signal will only be delivered if not blocked by the original
+signal mask.
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+	__u32 len;
+	__u8  sigset[0];
+};
+
+4.21 KVM_GET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (out)
+Returns: 0 on success, -1 on error
+
+Reads the floating point state from the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u8  fpr[8][16];
+	__u16 fcw;
+	__u16 fsw;
+	__u8  ftwx;  /* in fxsave format */
+	__u8  pad1;
+	__u16 last_opcode;
+	__u64 last_ip;
+	__u64 last_dp;
+	__u8  xmm[16][16];
+	__u32 mxcsr;
+	__u32 pad2;
+};
+
+4.22 KVM_SET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (in)
+Returns: 0 on success, -1 on error
+
+Writes the floating point state to the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u8  fpr[8][16];
+	__u16 fcw;
+	__u16 fsw;
+	__u8  ftwx;  /* in fxsave format */
+	__u8  pad1;
+	__u16 last_opcode;
+	__u64 last_ip;
+	__u64 last_dp;
+	__u8  xmm[16][16];
+	__u32 mxcsr;
+	__u32 pad2;
+};
+
+4.23 KVM_CREATE_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Creates an interrupt controller model in the kernel.  On x86, creates a virtual
+ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
+local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
+only go to the IOAPIC.  On ia64, a IOSAPIC is created.
+
+4.24 KVM_IRQ_LINE
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_level
+Returns: 0 on success, -1 on error
+
+Sets the level of a GSI input to the interrupt controller model in the kernel.
+Requires that an interrupt controller model has been previously created with
+KVM_CREATE_IRQCHIP.  Note that edge-triggered interrupts require the level
+to be set to 1 and then back to 0.
+
+struct kvm_irq_level {
+	union {
+		__u32 irq;     /* GSI */
+		__s32 status;  /* not used for KVM_IRQ_LEVEL */
+	};
+	__u32 level;           /* 0 or 1 */
+};
+
+4.25 KVM_GET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in/out)
+Returns: 0 on success, -1 on error
+
+Reads the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP into a buffer provided by the caller.
+
+struct kvm_irqchip {
+	__u32 chip_id;  /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+	__u32 pad;
+        union {
+		char dummy[512];  /* reserving space */
+		struct kvm_pic_state pic;
+		struct kvm_ioapic_state ioapic;
+	} chip;
+};
+
+4.26 KVM_SET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP from a buffer provided by the caller.
+
+struct kvm_irqchip {
+	__u32 chip_id;  /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+	__u32 pad;
+        union {
+		char dummy[512];  /* reserving space */
+		struct kvm_pic_state pic;
+		struct kvm_ioapic_state ioapic;
+	} chip;
+};
+
+5. The kvm_run structure
+
+Application code obtains a pointer to the kvm_run structure by
+mmap()ing a vcpu fd.  From that point, application code can control
+execution by changing fields in kvm_run prior to calling the KVM_RUN
+ioctl, and obtain information about the reason KVM_RUN returned by
+looking up structure members.
+
+struct kvm_run {
+	/* in */
+	__u8 request_interrupt_window;
+
+Request that KVM_RUN return when it becomes possible to inject external
+interrupts into the guest.  Useful in conjunction with KVM_INTERRUPT.
+
+	__u8 padding1[7];
+
+	/* out */
+	__u32 exit_reason;
+
+When KVM_RUN has returned successfully (return value 0), this informs
+application code why KVM_RUN has returned.  Allowable values for this
+field are detailed below.
+
+	__u8 ready_for_interrupt_injection;
+
+If request_interrupt_window has been specified, this field indicates
+an interrupt can be injected now with KVM_INTERRUPT.
+
+	__u8 if_flag;
+
+The value of the current interrupt flag.  Only valid if in-kernel
+local APIC is not used.
+
+	__u8 padding2[2];
+
+	/* in (pre_kvm_run), out (post_kvm_run) */
+	__u64 cr8;
+
+The value of the cr8 register.  Only valid if in-kernel local APIC is
+not used.  Both input and output.
+
+	__u64 apic_base;
+
+The value of the APIC BASE msr.  Only valid if in-kernel local
+APIC is not used.  Both input and output.
+
+	union {
+		/* KVM_EXIT_UNKNOWN */
+		struct {
+			__u64 hardware_exit_reason;
+		} hw;
+
+If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown
+reasons.  Further architecture-specific information is available in
+hardware_exit_reason.
+
+		/* KVM_EXIT_FAIL_ENTRY */
+		struct {
+			__u64 hardware_entry_failure_reason;
+		} fail_entry;
+
+If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due
+to unknown reasons.  Further architecture-specific information is
+available in hardware_entry_failure_reason.
+
+		/* KVM_EXIT_EXCEPTION */
+		struct {
+			__u32 exception;
+			__u32 error_code;
+		} ex;
+
+Unused.
+
+		/* KVM_EXIT_IO */
+		struct {
+#define KVM_EXIT_IO_IN  0
+#define KVM_EXIT_IO_OUT 1
+			__u8 direction;
+			__u8 size; /* bytes */
+			__u16 port;
+			__u32 count;
+			__u64 data_offset; /* relative to kvm_run start */
+		} io;
+
+If exit_reason is KVM_EXIT_IO_IN or KVM_EXIT_IO_OUT, then the vcpu has
+executed a port I/O instruction which could not be satisfied by kvm.
+data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
+where kvm expects application code to place the data for the next
+KVM_RUN invocation (KVM_EXIT_IO_IN).  Data format is a patcked array.
+
+		struct {
+			struct kvm_debug_exit_arch arch;
+		} debug;
+
+Unused.
+
+		/* KVM_EXIT_MMIO */
+		struct {
+			__u64 phys_addr;
+			__u8  data[8];
+			__u32 len;
+			__u8  is_write;
+		} mmio;
+
+If exit_reason is KVM_EXIT_MMIO or KVM_EXIT_IO_OUT, then the vcpu has
+executed a memory-mapped I/O instruction which could not be satisfied
+by kvm.  The 'data' member contains the written data if 'is_write' is
+true, and should be filled by application code otherwise.
+
+		/* KVM_EXIT_HYPERCALL */
+		struct {
+			__u64 nr;
+			__u64 args[6];
+			__u64 ret;
+			__u32 longmode;
+			__u32 pad;
+		} hypercall;
+
+Unused.
+
+		/* KVM_EXIT_TPR_ACCESS */
+		struct {
+			__u64 rip;
+			__u32 is_write;
+			__u32 pad;
+		} tpr_access;
+
+To be documented (KVM_TPR_ACCESS_REPORTING).
+
+		/* KVM_EXIT_S390_SIEIC */
+		struct {
+			__u8 icptcode;
+			__u64 mask; /* psw upper half */
+			__u64 addr; /* psw lower half */
+			__u16 ipa;
+			__u32 ipb;
+		} s390_sieic;
+
+s390 specific.
+
+		/* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR       1
+#define KVM_S390_RESET_CLEAR     2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT  8
+#define KVM_S390_RESET_IPL       16
+		__u64 s390_reset_flags;
+
+s390 specific.
+
+		/* KVM_EXIT_DCR */
+		struct {
+			__u32 dcrn;
+			__u32 data;
+			__u8  is_write;
+		} dcr;
+
+powerpc specific.
+
+		/* Fix the size of the union. */
+		char padding[256];
+	};
+};

Documentation/networking/00-INDEX

@@ -60,6 +60,8 @@ framerelay.txt
 	- info on using Frame Relay/Data Link Connection Identifier (DLCI).
 generic_netlink.txt
 	- info on Generic Netlink
+ieee802154.txt
+	- Linux IEEE 802.15.4 implementation, API and drivers
 ip-sysctl.txt
 	- /proc/sys/net/ipv4/* variables
 ip_dynaddr.txt

Documentation/networking/ieee802154.txt

@@ -22,7 +22,7 @@ int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
 .....
 
 The address family, socket addresses etc. are defined in the
-include/net/ieee802154/af_ieee802154.h header or in the special header
+include/net/af_ieee802154.h header or in the special header
 in our userspace package (see either linux-zigbee sourceforge download page
 or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
 
@@ -33,7 +33,7 @@ MLME - MAC Level Management
 ============================
 
 Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
-See the include/net/ieee802154/nl802154.h header. Our userspace tools package
+See the include/net/nl802154.h header. Our userspace tools package
 (see above) provides CLI configuration utility for radio interfaces and simple
 coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
 
@@ -54,10 +54,14 @@ Those types of devices require different approach to be hooked into Linux kernel
 HardMAC
 =======
 
-See the header include/net/ieee802154/netdevice.h. You have to implement Linux
+See the header include/net/ieee802154_netdev.h. You have to implement Linux
 net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
-code via plain sk_buffs. The control block of sk_buffs will contain additional
+code via plain sk_buffs. On skb reception skb->cb must contain additional
-info as described in the struct ieee802154_mac_cb.
+info as described in the struct ieee802154_mac_cb. During packet transmission
+the skb->cb is used to provide additional data to device's header_ops->create
+function. Be aware, that this data can be overriden later (when socket code
+submits skb to qdisc), so if you need something from that cb later, you should
+store info in the skb->data on your own.
 
 To hook the MLME interface you have to populate the ml_priv field of your
 net_device with a pointer to struct ieee802154_mlme_ops instance. All fields are
@@ -69,8 +73,8 @@ We provide an example of simple HardMAC driver at drivers/ieee802154/fakehard.c
 SoftMAC
 =======
 
-We are going to provide intermediate layer impelementing IEEE 802.15.4 MAC
+We are going to provide intermediate layer implementing IEEE 802.15.4 MAC
 in software. This is currently WIP.
 
-See header include/net/ieee802154/mac802154.h and several drivers in
+See header include/net/mac802154.h and several drivers in drivers/ieee802154/.
-drivers/ieee802154/
+

Documentation/networking/ip-sysctl.txt

@@ -311,9 +311,12 @@ tcp_no_metrics_save - BOOLEAN
 	connections.
 
 tcp_orphan_retries - INTEGER
-	How may times to retry before killing TCP connection, closed
+	This value influences the timeout of a locally closed TCP connection,
-	by our side. Default value 7 corresponds to ~50sec-16min
+	when RTO retransmissions remain unacknowledged.
-	depending on RTO. If you machine is loaded WEB server,
+	See tcp_retries2 for more details.
+
+	The default value is 7.
+	If your machine is a loaded WEB server,
 	you should think about lowering this value, such sockets
 	may consume significant resources. Cf. tcp_max_orphans.
 
@@ -327,16 +330,28 @@ tcp_retrans_collapse - BOOLEAN
 	certain TCP stacks.
 
 tcp_retries1 - INTEGER
-	How many times to retry before deciding that something is wrong
+	This value influences the time, after which TCP decides, that
-	and it is necessary to report this suspicion to network layer.
+	something is wrong due to unacknowledged RTO retransmissions,
-	Minimal RFC value is 3, it is default, which corresponds
+	and reports this suspicion to the network layer.
-	to ~3sec-8min depending on RTO.
+	See tcp_retries2 for more details.
+
+	RFC 1122 recommends at least 3 retransmissions, which is the
+	default.
 
 tcp_retries2 - INTEGER
-	How may times to retry before killing alive TCP connection.
+	This value influences the timeout of an alive TCP connection,
-	RFC1122 says that the limit should be longer than 100 sec.
+	when RTO retransmissions remain unacknowledged.
-	It is too small number.	Default value 15 corresponds to ~13-30min
+	Given a value of N, a hypothetical TCP connection following
-	depending on RTO.
+	exponential backoff with an initial RTO of TCP_RTO_MIN would
+	retransmit N times before killing the connection at the (N+1)th RTO.
+
+	The default value of 15 yields a hypothetical timeout of 924.6
+	seconds and is a lower bound for the effective timeout.
+	TCP will effectively time out at the first RTO which exceeds the
+	hypothetical timeout.
+
+	RFC 1122 recommends at least 100 seconds for the timeout,
+	which corresponds to a value of at least 8.
 
 tcp_rfc1337 - BOOLEAN
 	If set, the TCP stack behaves conforming to RFC1337. If unset,
@@ -1282,6 +1297,16 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
+addr_scope_policy - INTEGER
+	Control IPv4 address scoping - draft-stewart-tsvwg-sctp-ipv4-00
+
+	0   - Disable IPv4 address scoping
+	1   - Enable IPv4 address scoping
+	2   - Follow draft but allow IPv4 private addresses
+	3   - Follow draft but allow IPv4 link local addresses
+
+	Default: 1
+
 
 /proc/sys/net/core/*
 dev_weight - INTEGER

Documentation/power/runtime_pm.txt

@@ -0,0 +1,378 @@
+Run-time Power Management Framework for I/O Devices
+
+(C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+
+1. Introduction
+
+Support for run-time power management (run-time PM) of I/O devices is provided
+at the power management core (PM core) level by means of:
+
+* The power management workqueue pm_wq in which bus types and device drivers can
+  put their PM-related work items.  It is strongly recommended that pm_wq be
+  used for queuing all work items related to run-time PM, because this allows
+  them to be synchronized with system-wide power transitions (suspend to RAM,
+  hibernation and resume from system sleep states).  pm_wq is declared in
+  include/linux/pm_runtime.h and defined in kernel/power/main.c.
+
+* A number of run-time PM fields in the 'power' member of 'struct device' (which
+  is of the type 'struct dev_pm_info', defined in include/linux/pm.h) that can
+  be used for synchronizing run-time PM operations with one another.
+
+* Three device run-time PM callbacks in 'struct dev_pm_ops' (defined in
+  include/linux/pm.h).
+
+* A set of helper functions defined in drivers/base/power/runtime.c that can be
+  used for carrying out run-time PM operations in such a way that the
+  synchronization between them is taken care of by the PM core.  Bus types and
+  device drivers are encouraged to use these functions.
+
+The run-time PM callbacks present in 'struct dev_pm_ops', the device run-time PM
+fields of 'struct dev_pm_info' and the core helper functions provided for
+run-time PM are described below.
+
+2. Device Run-time PM Callbacks
+
+There are three device run-time PM callbacks defined in 'struct dev_pm_ops':
+
+struct dev_pm_ops {
+	...
+	int (*runtime_suspend)(struct device *dev);
+	int (*runtime_resume)(struct device *dev);
+	void (*runtime_idle)(struct device *dev);
+	...
+};
+
+The ->runtime_suspend() callback is executed by the PM core for the bus type of
+the device being suspended.  The bus type's callback is then _entirely_
+_responsible_ for handling the device as appropriate, which may, but need not
+include executing the device driver's own ->runtime_suspend() callback (from the
+PM core's point of view it is not necessary to implement a ->runtime_suspend()
+callback in a device driver as long as the bus type's ->runtime_suspend() knows
+what to do to handle the device).
+
+  * Once the bus type's ->runtime_suspend() callback has completed successfully
+    for given device, the PM core regards the device as suspended, which need
+    not mean that the device has been put into a low power state.  It is
+    supposed to mean, however, that the device will not process data and will
+    not communicate with the CPU(s) and RAM until its bus type's
+    ->runtime_resume() callback is executed for it.  The run-time PM status of
+    a device after successful execution of its bus type's ->runtime_suspend()
+    callback is 'suspended'.
+
+  * If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN,
+    the device's run-time PM status is supposed to be 'active', which means that
+    the device _must_ be fully operational afterwards.
+
+  * If the bus type's ->runtime_suspend() callback returns an error code
+    different from -EBUSY or -EAGAIN, the PM core regards this as a fatal
+    error and will refuse to run the helper functions described in Section 4
+    for the device, until the status of it is directly set either to 'active'
+    or to 'suspended' (the PM core provides special helper functions for this
+    purpose).
+
+In particular, if the driver requires remote wakeup capability for proper
+functioning and device_may_wakeup() returns 'false' for the device, then
+->runtime_suspend() should return -EBUSY.  On the other hand, if
+device_may_wakeup() returns 'true' for the device and the device is put
+into a low power state during the execution of its bus type's
+->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism
+allowing the device to request a change of its power state, such as PCI PME)
+will be enabled for the device.  Generally, remote wake-up should be enabled
+for all input devices put into a low power state at run time.
+
+The ->runtime_resume() callback is executed by the PM core for the bus type of
+the device being woken up.  The bus type's callback is then _entirely_
+_responsible_ for handling the device as appropriate, which may, but need not
+include executing the device driver's own ->runtime_resume() callback (from the
+PM core's point of view it is not necessary to implement a ->runtime_resume()
+callback in a device driver as long as the bus type's ->runtime_resume() knows
+what to do to handle the device).
+
+  * Once the bus type's ->runtime_resume() callback has completed successfully,
+    the PM core regards the device as fully operational, which means that the
+    device _must_ be able to complete I/O operations as needed.  The run-time
+    PM status of the device is then 'active'.
+
+  * If the bus type's ->runtime_resume() callback returns an error code, the PM
+    core regards this as a fatal error and will refuse to run the helper
+    functions described in Section 4 for the device, until its status is
+    directly set either to 'active' or to 'suspended' (the PM core provides
+    special helper functions for this purpose).
+
+The ->runtime_idle() callback is executed by the PM core for the bus type of
+given device whenever the device appears to be idle, which is indicated to the
+PM core by two counters, the device's usage counter and the counter of 'active'
+children of the device.
+
+  * If any of these counters is decreased using a helper function provided by
+    the PM core and it turns out to be equal to zero, the other counter is
+    checked.  If that counter also is equal to zero, the PM core executes the
+    device bus type's ->runtime_idle() callback (with the device as an
+    argument).
+
+The action performed by a bus type's ->runtime_idle() callback is totally
+dependent on the bus type in question, but the expected and recommended action
+is to check if the device can be suspended (i.e. if all of the conditions
+necessary for suspending the device are satisfied) and to queue up a suspend
+request for the device in that case.
+
+The helper functions provided by the PM core, described in Section 4, guarantee
+that the following constraints are met with respect to the bus type's run-time
+PM callbacks:
+
+(1) The callbacks are mutually exclusive (e.g. it is forbidden to execute
+    ->runtime_suspend() in parallel with ->runtime_resume() or with another
+    instance of ->runtime_suspend() for the same device) with the exception that
+    ->runtime_suspend() or ->runtime_resume() can be executed in parallel with
+    ->runtime_idle() (although ->runtime_idle() will not be started while any
+    of the other callbacks is being executed for the same device).
+
+(2) ->runtime_idle() and ->runtime_suspend() can only be executed for 'active'
+    devices (i.e. the PM core will only execute ->runtime_idle() or
+    ->runtime_suspend() for the devices the run-time PM status of which is
+    'active').
+
+(3) ->runtime_idle() and ->runtime_suspend() can only be executed for a device
+    the usage counter of which is equal to zero _and_ either the counter of
+    'active' children of which is equal to zero, or the 'power.ignore_children'
+    flag of which is set.
+
+(4) ->runtime_resume() can only be executed for 'suspended' devices  (i.e. the
+    PM core will only execute ->runtime_resume() for the devices the run-time
+    PM status of which is 'suspended').
+
+Additionally, the helper functions provided by the PM core obey the following
+rules:
+
+  * If ->runtime_suspend() is about to be executed or there's a pending request
+    to execute it, ->runtime_idle() will not be executed for the same device.
+
+  * A request to execute or to schedule the execution of ->runtime_suspend()
+    will cancel any pending requests to execute ->runtime_idle() for the same
+    device.
+
+  * If ->runtime_resume() is about to be executed or there's a pending request
+    to execute it, the other callbacks will not be executed for the same device.
+
+  * A request to execute ->runtime_resume() will cancel any pending or
+    scheduled requests to execute the other callbacks for the same device.
+
+3. Run-time PM Device Fields
+
+The following device run-time PM fields are present in 'struct dev_pm_info', as
+defined in include/linux/pm.h:
+
+  struct timer_list suspend_timer;
+    - timer used for scheduling (delayed) suspend request
+
+  unsigned long timer_expires;
+    - timer expiration time, in jiffies (if this is different from zero, the
+      timer is running and will expire at that time, otherwise the timer is not
+      running)
+
+  struct work_struct work;
+    - work structure used for queuing up requests (i.e. work items in pm_wq)
+
+  wait_queue_head_t wait_queue;
+    - wait queue used if any of the helper functions needs to wait for another
+      one to complete
+
+  spinlock_t lock;
+    - lock used for synchronisation
+
+  atomic_t usage_count;
+    - the usage counter of the device
+
+  atomic_t child_count;
+    - the count of 'active' children of the device
+
+  unsigned int ignore_children;
+    - if set, the value of child_count is ignored (but still updated)
+
+  unsigned int disable_depth;
+    - used for disabling the helper funcions (they work normally if this is
+      equal to zero); the initial value of it is 1 (i.e. run-time PM is
+      initially disabled for all devices)
+
+  unsigned int runtime_error;
+    - if set, there was a fatal error (one of the callbacks returned error code
+      as described in Section 2), so the helper funtions will not work until
+      this flag is cleared; this is the error code returned by the failing
+      callback
+
+  unsigned int idle_notification;
+    - if set, ->runtime_idle() is being executed
+
+  unsigned int request_pending;
+    - if set, there's a pending request (i.e. a work item queued up into pm_wq)
+
+  enum rpm_request request;
+    - type of request that's pending (valid if request_pending is set)
+
+  unsigned int deferred_resume;
+    - set if ->runtime_resume() is about to be run while ->runtime_suspend() is
+      being executed for that device and it is not practical to wait for the
+      suspend to complete; means "start a resume as soon as you've suspended"
+
+  enum rpm_status runtime_status;
+    - the run-time PM status of the device; this field's initial value is
+      RPM_SUSPENDED, which means that each device is initially regarded by the
+      PM core as 'suspended', regardless of its real hardware status
+
+All of the above fields are members of the 'power' member of 'struct device'.
+
+4. Run-time PM Device Helper Functions
+
+The following run-time PM helper functions are defined in
+drivers/base/power/runtime.c and include/linux/pm_runtime.h:
+
+  void pm_runtime_init(struct device *dev);
+    - initialize the device run-time PM fields in 'struct dev_pm_info'
+
+  void pm_runtime_remove(struct device *dev);
+    - make sure that the run-time PM of the device will be disabled after
+      removing the device from device hierarchy
+
+  int pm_runtime_idle(struct device *dev);
+    - execute ->runtime_idle() for the device's bus type; returns 0 on success
+      or error code on failure, where -EINPROGRESS means that ->runtime_idle()
+      is already being executed
+
+  int pm_runtime_suspend(struct device *dev);
+    - execute ->runtime_suspend() for the device's bus type; returns 0 on
+      success, 1 if the device's run-time PM status was already 'suspended', or
+      error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
+      to suspend the device again in future
+
+  int pm_runtime_resume(struct device *dev);
+    - execute ->runtime_resume() for the device's bus type; returns 0 on
+      success, 1 if the device's run-time PM status was already 'active' or
+      error code on failure, where -EAGAIN means it may be safe to attempt to
+      resume the device again in future, but 'power.runtime_error' should be
+      checked additionally
+
+  int pm_request_idle(struct device *dev);
+    - submit a request to execute ->runtime_idle() for the device's bus type
+      (the request is represented by a work item in pm_wq); returns 0 on success
+      or error code if the request has not been queued up
+
+  int pm_schedule_suspend(struct device *dev, unsigned int delay);
+    - schedule the execution of ->runtime_suspend() for the device's bus type
+      in future, where 'delay' is the time to wait before queuing up a suspend
+      work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is
+      queued up immediately); returns 0 on success, 1 if the device's PM
+      run-time status was already 'suspended', or error code if the request
+      hasn't been scheduled (or queued up if 'delay' is 0); if the execution of
+      ->runtime_suspend() is already scheduled and not yet expired, the new
+      value of 'delay' will be used as the time to wait
+
+  int pm_request_resume(struct device *dev);
+    - submit a request to execute ->runtime_resume() for the device's bus type
+      (the request is represented by a work item in pm_wq); returns 0 on
+      success, 1 if the device's run-time PM status was already 'active', or
+      error code if the request hasn't been queued up
+
+  void pm_runtime_get_noresume(struct device *dev);
+    - increment the device's usage counter
+
+  int pm_runtime_get(struct device *dev);
+    - increment the device's usage counter, run pm_request_resume(dev) and
+      return its result
+
+  int pm_runtime_get_sync(struct device *dev);
+    - increment the device's usage counter, run pm_runtime_resume(dev) and
+      return its result
+
+  void pm_runtime_put_noidle(struct device *dev);
+    - decrement the device's usage counter
+
+  int pm_runtime_put(struct device *dev);
+    - decrement the device's usage counter, run pm_request_idle(dev) and return
+      its result
+
+  int pm_runtime_put_sync(struct device *dev);
+    - decrement the device's usage counter, run pm_runtime_idle(dev) and return
+      its result
+
+  void pm_runtime_enable(struct device *dev);
+    - enable the run-time PM helper functions to run the device bus type's
+      run-time PM callbacks described in Section 2
+
+  int pm_runtime_disable(struct device *dev);
+    - prevent the run-time PM helper functions from running the device bus
+      type's run-time PM callbacks, make sure that all of the pending run-time
+      PM operations on the device are either completed or canceled; returns
+      1 if there was a resume request pending and it was necessary to execute
+      ->runtime_resume() for the device's bus type to satisfy that request,
+      otherwise 0 is returned
+
+  void pm_suspend_ignore_children(struct device *dev, bool enable);
+    - set/unset the power.ignore_children flag of the device
+
+  int pm_runtime_set_active(struct device *dev);
+    - clear the device's 'power.runtime_error' flag, set the device's run-time
+      PM status to 'active' and update its parent's counter of 'active'
+      children as appropriate (it is only valid to use this function if
+      'power.runtime_error' is set or 'power.disable_depth' is greater than
+      zero); it will fail and return error code if the device has a parent
+      which is not active and the 'power.ignore_children' flag of which is unset
+
+  void pm_runtime_set_suspended(struct device *dev);
+    - clear the device's 'power.runtime_error' flag, set the device's run-time
+      PM status to 'suspended' and update its parent's counter of 'active'
+      children as appropriate (it is only valid to use this function if
+      'power.runtime_error' is set or 'power.disable_depth' is greater than
+      zero)
+
+It is safe to execute the following helper functions from interrupt context:
+
+pm_request_idle()
+pm_schedule_suspend()
+pm_request_resume()
+pm_runtime_get_noresume()
+pm_runtime_get()
+pm_runtime_put_noidle()
+pm_runtime_put()
+pm_suspend_ignore_children()
+pm_runtime_set_active()
+pm_runtime_set_suspended()
+pm_runtime_enable()
+
+5. Run-time PM Initialization, Device Probing and Removal
+
+Initially, the run-time PM is disabled for all devices, which means that the
+majority of the run-time PM helper funtions described in Section 4 will return
+-EAGAIN until pm_runtime_enable() is called for the device.
+
+In addition to that, the initial run-time PM status of all devices is
+'suspended', but it need not reflect the actual physical state of the device.
+Thus, if the device is initially active (i.e. it is able to process I/O), its
+run-time PM status must be changed to 'active', with the help of
+pm_runtime_set_active(), before pm_runtime_enable() is called for the device.
+
+However, if the device has a parent and the parent's run-time PM is enabled,
+calling pm_runtime_set_active() for the device will affect the parent, unless
+the parent's 'power.ignore_children' flag is set.  Namely, in that case the
+parent won't be able to suspend at run time, using the PM core's helper
+functions, as long as the child's status is 'active', even if the child's
+run-time PM is still disabled (i.e. pm_runtime_enable() hasn't been called for
+the child yet or pm_runtime_disable() has been called for it).  For this reason,
+once pm_runtime_set_active() has been called for the device, pm_runtime_enable()
+should be called for it too as soon as reasonably possible or its run-time PM
+status should be changed back to 'suspended' with the help of
+pm_runtime_set_suspended().
+
+If the default initial run-time PM status of the device (i.e. 'suspended')
+reflects the actual state of the device, its bus type's or its driver's
+->probe() callback will likely need to wake it up using one of the PM core's
+helper functions described in Section 4.  In that case, pm_runtime_resume()
+should be used.  Of course, for this purpose the device's run-time PM has to be
+enabled earlier by calling pm_runtime_enable().
+
+If the device bus type's or driver's ->probe() or ->remove() callback runs
+pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
+they will fail returning -EAGAIN, because the device's usage counter is
+incremented by the core before executing ->probe() and ->remove().  Still, it
+may be desirable to suspend the device as soon as ->probe() or ->remove() has
+finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus
+type's ->runtime_idle() callback at that time.

Documentation/s390/s390dbf.txt

@@ -495,6 +495,13 @@ and for each vararg a long value. So e.g. for a debug entry with a format
 string plus two varargs one would need to allocate a (3 * sizeof(long)) 
 byte data area in the debug_register() function.
 
+IMPORTANT: Using "%s" in sprintf event functions is dangerous. You can only
+use "%s" in the sprintf event functions, if the memory for the passed string is
+available as long as the debug feature exists. The reason behind this is that
+due to performance considerations only a pointer to the string is stored in
+the debug feature. If you log a string that is freed afterwards, you will get
+an OOPS when inspecting the debug feature, because then the debug feature will
+access the already freed memory.
 
 NOTE: If using the sprintf view do NOT use other event/exception functions
 than the sprintf-event and -exception functions.

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -60,6 +60,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     slots	- Reserve the slot index for the given driver.
 		  This option takes multiple strings.		
 		  See "Module Autoloading Support" section for details.
+    debug	- Specifies the debug message level
+		  (0 = disable debug prints, 1 = normal debug messages,
+		   2 = verbose debug messages)
+		  This option appears only when CONFIG_SND_DEBUG=y.
+		  This option can be dynamically changed via sysfs
+		  /sys/modules/snd/parameters/debug file.
   
   Module snd-pcm-oss
   ------------------
@@ -513,6 +519,26 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     or input, but you may use this module for any application which
     requires a sound card (like RealPlayer).
 
+    pcm_devs       - Number of PCM devices assigned to each card
+                     (default = 1, up to 4)
+    pcm_substreams - Number of PCM substreams assigned to each PCM
+                     (default = 8, up to 16)
+    hrtimer        - Use hrtimer (=1, default) or system timer (=0)
+    fake_buffer    - Fake buffer allocations (default = 1)
+
+    When multiple PCM devices are created, snd-dummy gives different
+    behavior to each PCM device:
+      0 = interleaved with mmap support
+      1 = non-interleaved with mmap support
+      2 = interleaved without mmap 
+      3 = non-interleaved without mmap
+
+    As default, snd-dummy drivers doesn't allocate the real buffers
+    but either ignores read/write or mmap a single dummy page to all
+    buffer pages, in order to save the resouces.  If your apps need
+    the read/ written buffer data to be consistent, pass fake_buffer=0
+    option.
+
     The power-management is supported.
 
   Module snd-echo3g
@@ -768,6 +794,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
 		Passing -1 will make the driver to choose the appropriate
 		value based on the controller chip.
+    patch	- Specifies the early "patch" files to modify the HD-audio
+    		setup before initializing the codecs.  This option is
+		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+		See HD-Audio.txt for details.
     
     [Single (global) options]
     single_cmd  - Use single immediate commands to communicate with

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -114,8 +114,8 @@ ALC662/663/272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
-ALC882/885
+ALC882/883/885/888/889
-==========
+======================
   3stack-dig	3-jack with SPDIF I/O
   6stack-dig	6-jack digital with SPDIF I/O
   arima		Arima W820Di1
@@ -127,12 +127,8 @@ ALC882/885
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
-  auto		auto-config reading BIOS (default)
+  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
-
+  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
-ALC883/888
-==========
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
   3stack-6ch    3-jack 6-channel
   3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
   6stack-dig-demo  6-jack digital for Intel demo board
@@ -140,6 +136,7 @@ ALC883/888
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
   acer-aspire-6530g Acer Aspire 6530G
+  acer-aspire-7730g Acer Aspire 7730G
   acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
@@ -155,10 +152,13 @@ ALC883/888
   3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
   6stack-dell	Dell machines with 6stack (Inspiron 530)
   mitac		Mitac 8252D
+  clevo-m540r	Clevo M540R (6ch + digital)
   clevo-m720	Clevo M720 laptop series
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  intel-alc889a	Intel IbexPeak with ALC889A
+  intel-x58	Intel DX58 with ALC889
   asus-p5q	ASUS P5Q-EM boards
   mb31		MacBook 3,1
   sony-vaio-tt  Sony VAIO TT
@@ -229,7 +229,7 @@ AD1984
 ======
   basic		default configuration
   thinkpad	Lenovo Thinkpad T61/X61
-  dell		Dell T3400
+  dell_desktop	Dell T3400
 
 AD1986A
 =======
@@ -258,6 +258,7 @@ Conexant 5045
   laptop-micsense   Laptop with Mic sense (old model fujitsu)
   laptop-hpmicsense Laptop with HP and Mic senses
   benq		Benq R55E
+  laptop-hp530	HP 530 laptop
   test		for testing/debugging purpose, almost all controls
 		can be adjusted.  Appearing only when compiled with
 		$CONFIG_SND_DEBUG=y
@@ -278,9 +279,16 @@ Conexant 5051
   hp-dv6736	HP dv6736
   lenovo-x200	Lenovo X200 laptop
 
+Conexant 5066
+=============
+  laptop	Basic Laptop config (default)
+  dell-laptop	Dell laptops
+  olpc-xo-1_5	OLPC XO 1.5
+
 STAC9200
 ========
   ref		Reference board
+  oqo		OQO Model 2
   dell-d21	Dell (unknown)
   dell-d22	Dell (unknown)
   dell-d23	Dell (unknown)
@@ -368,10 +376,12 @@ STAC92HD73*
 ===========
   ref		Reference board
   no-jd		BIOS setup but without jack-detection
+  intel		Intel DG45* mobos
   dell-m6-amic	Dell desktops/laptops with analog mics
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  alienware	Alienware M17x
   auto		BIOS setup (default)
 
 STAC92HD83*
@@ -385,3 +395,8 @@ STAC9872
 ========
   vaio		VAIO laptop without SPDIF
   auto		BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+  mbp55		MacBook Pro 5,5
+  auto		BIOS setup (default)

Documentation/sound/alsa/HD-Audio.txt

@@ -138,6 +138,10 @@ override the BIOS setup or to provide more comprehensive features.
 The driver checks PCI SSID and looks through the static configuration
 table until any matching entry is found.  If you have a new machine,
 you may see a message like below:
+------------------------------------------------------------------------
+    hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
 ------------------------------------------------------------------------
     hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
 ------------------------------------------------------------------------
@@ -403,6 +407,66 @@ re-configure based on that state, run like below:
 ------------------------------------------------------------------------
 
 
+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec.  This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [model]
+  auto
+
+  [pincfg]
+  0x12 0x411111f0
+
+  [verb]
+  0x20 0x500 0x03
+  0x20 0x400 0xff
+
+  [hint]
+  hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`.  The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec.  The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware().  Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware.  For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one 
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+    options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
 Power-Saving
 ~~~~~~~~~~~~
 The power-saving is a kind of auto-suspend of the device.  When the

Documentation/sysctl/kernel.txt

@@ -19,6 +19,7 @@ Currently, these files might (depending on your configuration)
 show up in /proc/sys/kernel:
 - acpi_video_flags
 - acct
+- callhome		     [ S390 only ]
 - auto_msgmni
 - core_pattern
 - core_uses_pid
@@ -91,6 +92,21 @@ valid for 30 seconds.
 
 ==============================================================
 
+callhome:
+
+Controls the kernel's callhome behavior in case of a kernel panic.
+
+The s390 hardware allows an operating system to send a notification
+to a service organization (callhome) in case of an operating system panic.
+
+When the value in this file is 0 (which is the default behavior)
+nothing happens in case of a kernel panic. If this value is set to "1"
+the complete kernel oops message is send to the IBM customer service
+organization in case the mainframe the Linux operating system is running
+on has a service contract with IBM.
+
+==============================================================
+
 core_pattern:
 
 core_pattern is used to specify a core dumpfile pattern name.

Documentation/trace/events.txt

@@ -1,7 +1,7 @@
 			     Event Tracing
 
 		Documentation written by Theodore Ts'o
-			Updated by Li Zefan
+		Updated by Li Zefan and Tom Zanussi
 
 1. Introduction
 ===============
@@ -22,12 +22,12 @@ tracing information should be printed.
 ---------------------------------
 
 The events which are available for tracing can be found in the file
-/debug/tracing/available_events.
+/sys/kernel/debug/tracing/available_events.
 
 To enable a particular event, such as 'sched_wakeup', simply echo it
-to /debug/tracing/set_event. For example:
+to /sys/kernel/debug/tracing/set_event. For example:
 
-	# echo sched_wakeup >> /debug/tracing/set_event
+	# echo sched_wakeup >> /sys/kernel/debug/tracing/set_event
 
 [ Note: '>>' is necessary, otherwise it will firstly disable
   all the events. ]
@@ -35,15 +35,15 @@ to /debug/tracing/set_event. For example:
 To disable an event, echo the event name to the set_event file prefixed
 with an exclamation point:
 
-	# echo '!sched_wakeup' >> /debug/tracing/set_event
+	# echo '!sched_wakeup' >> /sys/kernel/debug/tracing/set_event
 
 To disable all events, echo an empty line to the set_event file:
 
-	# echo > /debug/tracing/set_event
+	# echo > /sys/kernel/debug/tracing/set_event
 
 To enable all events, echo '*:*' or '*:' to the set_event file:
 
-	# echo *:* > /debug/tracing/set_event
+	# echo *:* > /sys/kernel/debug/tracing/set_event
 
 The events are organized into subsystems, such as ext4, irq, sched,
 etc., and a full event name looks like this: <subsystem>:<event>.  The
@@ -52,29 +52,29 @@ file.  All of the events in a subsystem can be specified via the syntax
 "<subsystem>:*"; for example, to enable all irq events, you can use the
 command:
 
-	# echo 'irq:*' > /debug/tracing/set_event
+	# echo 'irq:*' > /sys/kernel/debug/tracing/set_event
 
 2.2 Via the 'enable' toggle
 ---------------------------
 
-The events available are also listed in /debug/tracing/events/ hierarchy
+The events available are also listed in /sys/kernel/debug/tracing/events/ hierarchy
 of directories.
 
 To enable event 'sched_wakeup':
 
-	# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
+	# echo 1 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable
 
 To disable it:
 
-	# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
+	# echo 0 > /sys/kernel/debug/tracing/events/sched/sched_wakeup/enable
 
 To enable all events in sched subsystem:
 
-	# echo 1 > /debug/tracing/events/sched/enable
+	# echo 1 > /sys/kernel/debug/tracing/events/sched/enable
 
 To eanble all events:
 
-	# echo 1 > /debug/tracing/events/enable
+	# echo 1 > /sys/kernel/debug/tracing/events/enable
 
 When reading one of these enable files, there are four results:
 
@@ -83,8 +83,199 @@ When reading one of these enable files, there are four results:
  X - there is a mixture of events enabled and disabled
  ? - this file does not affect any event
 
+2.3 Boot option
+---------------
+
+In order to facilitate early boot debugging, use boot option:
+
+	trace_event=[event-list]
+
+The format of this boot option is the same as described in section 2.1.
+
 3. Defining an event-enabled tracepoint
 =======================================
 
 See The example provided in samples/trace_events
 
+4. Event formats
+================
+
+Each trace event has a 'format' file associated with it that contains
+a description of each field in a logged event.  This information can
+be used to parse the binary trace stream, and is also the place to
+find the field names that can be used in event filters (see section 5).
+
+It also displays the format string that will be used to print the
+event in text mode, along with the event name and ID used for
+profiling.
+
+Every event has a set of 'common' fields associated with it; these are
+the fields prefixed with 'common_'.  The other fields vary between
+events and correspond to the fields defined in the TRACE_EVENT
+definition for that event.
+
+Each field in the format has the form:
+
+     field:field-type field-name; offset:N; size:N;
+
+where offset is the offset of the field in the trace record and size
+is the size of the data item, in bytes.
+
+For example, here's the information displayed for the 'sched_wakeup'
+event:
+
+# cat /debug/tracing/events/sched/sched_wakeup/format
+
+name: sched_wakeup
+ID: 60
+format:
+	field:unsigned short common_type;	offset:0;	size:2;
+	field:unsigned char common_flags;	offset:2;	size:1;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;
+	field:int common_pid;	offset:4;	size:4;
+	field:int common_tgid;	offset:8;	size:4;
+
+	field:char comm[TASK_COMM_LEN];	offset:12;	size:16;
+	field:pid_t pid;	offset:28;	size:4;
+	field:int prio;	offset:32;	size:4;
+	field:int success;	offset:36;	size:4;
+	field:int cpu;	offset:40;	size:4;
+
+print fmt: "task %s:%d [%d] success=%d [%03d]", REC->comm, REC->pid,
+	   REC->prio, REC->success, REC->cpu
+
+This event contains 10 fields, the first 5 common and the remaining 5
+event-specific.  All the fields for this event are numeric, except for
+'comm' which is a string, a distinction important for event filtering.
+
+5. Event filtering
+==================
+
+Trace events can be filtered in the kernel by associating boolean
+'filter expressions' with them.  As soon as an event is logged into
+the trace buffer, its fields are checked against the filter expression
+associated with that event type.  An event with field values that
+'match' the filter will appear in the trace output, and an event whose
+values don't match will be discarded.  An event with no filter
+associated with it matches everything, and is the default when no
+filter has been set for an event.
+
+5.1 Expression syntax
+---------------------
+
+A filter expression consists of one or more 'predicates' that can be
+combined using the logical operators '&&' and '||'.  A predicate is
+simply a clause that compares the value of a field contained within a
+logged event with a constant value and returns either 0 or 1 depending
+on whether the field value matched (1) or didn't match (0):
+
+	  field-name relational-operator value
+
+Parentheses can be used to provide arbitrary logical groupings and
+double-quotes can be used to prevent the shell from interpreting
+operators as shell metacharacters.
+
+The field-names available for use in filters can be found in the
+'format' files for trace events (see section 4).
+
+The relational-operators depend on the type of the field being tested:
+
+The operators available for numeric fields are:
+
+==, !=, <, <=, >, >=
+
+And for string fields they are:
+
+==, !=
+
+Currently, only exact string matches are supported.
+
+Currently, the maximum number of predicates in a filter is 16.
+
+5.2 Setting filters
+-------------------
+
+A filter for an individual event is set by writing a filter expression
+to the 'filter' file for the given event.
+
+For example:
+
+# cd /debug/tracing/events/sched/sched_wakeup
+# echo "common_preempt_count > 4" > filter
+
+A slightly more involved example:
+
+# cd /debug/tracing/events/sched/sched_signal_send
+# echo "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
+
+If there is an error in the expression, you'll get an 'Invalid
+argument' error when setting it, and the erroneous string along with
+an error message can be seen by looking at the filter e.g.:
+
+# cd /debug/tracing/events/sched/sched_signal_send
+# echo "((sig >= 10 && sig < 15) || dsig == 17) && comm != bash" > filter
+-bash: echo: write error: Invalid argument
+# cat filter
+((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
+^
+parse_error: Field not found
+
+Currently the caret ('^') for an error always appears at the beginning of
+the filter string; the error message should still be useful though
+even without more accurate position info.
+
+5.3 Clearing filters
+--------------------
+
+To clear the filter for an event, write a '0' to the event's filter
+file.
+
+To clear the filters for all events in a subsystem, write a '0' to the
+subsystem's filter file.
+
+5.3 Subsystem filters
+---------------------
+
+For convenience, filters for every event in a subsystem can be set or
+cleared as a group by writing a filter expression into the filter file
+at the root of the subsytem.  Note however, that if a filter for any
+event within the subsystem lacks a field specified in the subsystem
+filter, or if the filter can't be applied for any other reason, the
+filter for that event will retain its previous setting.  This can
+result in an unintended mixture of filters which could lead to
+confusing (to the user who might think different filters are in
+effect) trace output.  Only filters that reference just the common
+fields can be guaranteed to propagate successfully to all events.
+
+Here are a few subsystem filter examples that also illustrate the
+above points:
+
+Clear the filters on all events in the sched subsytem:
+
+# cd /sys/kernel/debug/tracing/events/sched
+# echo 0 > filter
+# cat sched_switch/filter
+none
+# cat sched_wakeup/filter
+none
+
+Set a filter using only common fields for all events in the sched
+subsytem (all events end up with the same filter):
+
+# cd /sys/kernel/debug/tracing/events/sched
+# echo common_pid == 0 > filter
+# cat sched_switch/filter
+common_pid == 0
+# cat sched_wakeup/filter
+common_pid == 0
+
+Attempt to set a filter using a non-common field for all events in the
+sched subsytem (all events but those that have a prev_pid field retain
+their old filters):
+
+# cd /sys/kernel/debug/tracing/events/sched
+# echo prev_pid == 0 > filter
+# cat sched_switch/filter
+prev_pid == 0
+# cat sched_wakeup/filter
+common_pid == 0

Documentation/trace/ftrace-design.txt

@@ -0,0 +1,233 @@
+		function tracer guts
+		====================
+
+Introduction
+------------
+
+Here we will cover the architecture pieces that the common function tracing
+code relies on for proper functioning.  Things are broken down into increasing
+complexity so that you can start simple and at least get basic functionality.
+
+Note that this focuses on architecture implementation details only.  If you
+want more explanation of a feature in terms of common code, review the common
+ftrace.txt file.
+
+
+Prerequisites
+-------------
+
+Ftrace relies on these features being implemented:
+ STACKTRACE_SUPPORT - implement save_stack_trace()
+ TRACE_IRQFLAGS_SUPPORT - implement include/asm/irqflags.h
+
+
+HAVE_FUNCTION_TRACER
+--------------------
+
+You will need to implement the mcount and the ftrace_stub functions.
+
+The exact mcount symbol name will depend on your toolchain.  Some call it
+"mcount", "_mcount", or even "__mcount".  You can probably figure it out by
+running something like:
+	$ echo 'main(){}' | gcc -x c -S -o - - -pg | grep mcount
+	        call    mcount
+We'll make the assumption below that the symbol is "mcount" just to keep things
+nice and simple in the examples.
+
+Keep in mind that the ABI that is in effect inside of the mcount function is
+*highly* architecture/toolchain specific.  We cannot help you in this regard,
+sorry.  Dig up some old documentation and/or find someone more familiar than
+you to bang ideas off of.  Typically, register usage (argument/scratch/etc...)
+is a major issue at this point, especially in relation to the location of the
+mcount call (before/after function prologue).  You might also want to look at
+how glibc has implemented the mcount function for your architecture.  It might
+be (semi-)relevant.
+
+The mcount function should check the function pointer ftrace_trace_function
+to see if it is set to ftrace_stub.  If it is, there is nothing for you to do,
+so return immediately.  If it isn't, then call that function in the same way
+the mcount function normally calls __mcount_internal -- the first argument is
+the "frompc" while the second argument is the "selfpc" (adjusted to remove the
+size of the mcount call that is embedded in the function).
+
+For example, if the function foo() calls bar(), when the bar() function calls
+mcount(), the arguments mcount() will pass to the tracer are:
+	"frompc" - the address bar() will use to return to foo()
+	"selfpc" - the address bar() (with _mcount() size adjustment)
+
+Also keep in mind that this mcount function will be called *a lot*, so
+optimizing for the default case of no tracer will help the smooth running of
+your system when tracing is disabled.  So the start of the mcount function is
+typically the bare min with checking things before returning.  That also means
+the code flow should usually kept linear (i.e. no branching in the nop case).
+This is of course an optimization and not a hard requirement.
+
+Here is some pseudo code that should help (these functions should actually be
+implemented in assembly):
+
+void ftrace_stub(void)
+{
+	return;
+}
+
+void mcount(void)
+{
+	/* save any bare state needed in order to do initial checking */
+
+	extern void (*ftrace_trace_function)(unsigned long, unsigned long);
+	if (ftrace_trace_function != ftrace_stub)
+		goto do_trace;
+
+	/* restore any bare state */
+
+	return;
+
+do_trace:
+
+	/* save all state needed by the ABI (see paragraph above) */
+
+	unsigned long frompc = ...;
+	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+	ftrace_trace_function(frompc, selfpc);
+
+	/* restore all state needed by the ABI */
+}
+
+Don't forget to export mcount for modules !
+extern void mcount(void);
+EXPORT_SYMBOL(mcount);
+
+
+HAVE_FUNCTION_TRACE_MCOUNT_TEST
+-------------------------------
+
+This is an optional optimization for the normal case when tracing is turned off
+in the system.  If you do not enable this Kconfig option, the common ftrace
+code will take care of doing the checking for you.
+
+To support this feature, you only need to check the function_trace_stop
+variable in the mcount function.  If it is non-zero, there is no tracing to be
+done at all, so you can return.
+
+This additional pseudo code would simply be:
+void mcount(void)
+{
+	/* save any bare state needed in order to do initial checking */
+
++	if (function_trace_stop)
++		return;
+
+	extern void (*ftrace_trace_function)(unsigned long, unsigned long);
+	if (ftrace_trace_function != ftrace_stub)
+...
+
+
+HAVE_FUNCTION_GRAPH_TRACER
+--------------------------
+
+Deep breath ... time to do some real work.  Here you will need to update the
+mcount function to check ftrace graph function pointers, as well as implement
+some functions to save (hijack) and restore the return address.
+
+The mcount function should check the function pointers ftrace_graph_return
+(compare to ftrace_stub) and ftrace_graph_entry (compare to
+ftrace_graph_entry_stub).  If either of those are not set to the relevant stub
+function, call the arch-specific function ftrace_graph_caller which in turn
+calls the arch-specific function prepare_ftrace_return.  Neither of these
+function names are strictly required, but you should use them anyways to stay
+consistent across the architecture ports -- easier to compare & contrast
+things.
+
+The arguments to prepare_ftrace_return are slightly different than what are
+passed to ftrace_trace_function.  The second argument "selfpc" is the same,
+but the first argument should be a pointer to the "frompc".  Typically this is
+located on the stack.  This allows the function to hijack the return address
+temporarily to have it point to the arch-specific function return_to_handler.
+That function will simply call the common ftrace_return_to_handler function and
+that will return the original return address with which, you can return to the
+original call site.
+
+Here is the updated mcount pseudo code:
+void mcount(void)
+{
+...
+	if (ftrace_trace_function != ftrace_stub)
+		goto do_trace;
+
++#ifdef CONFIG_FUNCTION_GRAPH_TRACER
++	extern void (*ftrace_graph_return)(...);
++	extern void (*ftrace_graph_entry)(...);
++	if (ftrace_graph_return != ftrace_stub ||
++	    ftrace_graph_entry != ftrace_graph_entry_stub)
++		ftrace_graph_caller();
++#endif
+
+	/* restore any bare state */
+...
+
+Here is the pseudo code for the new ftrace_graph_caller assembly function:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void ftrace_graph_caller(void)
+{
+	/* save all state needed by the ABI */
+
+	unsigned long *frompc = &...;
+	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+	prepare_ftrace_return(frompc, selfpc);
+
+	/* restore all state needed by the ABI */
+}
+#endif
+
+For information on how to implement prepare_ftrace_return(), simply look at
+the x86 version.  The only architecture-specific piece in it is the setup of
+the fault recovery table (the asm(...) code).  The rest should be the same
+across architectures.
+
+Here is the pseudo code for the new return_to_handler assembly function.  Note
+that the ABI that applies here is different from what applies to the mcount
+code.  Since you are returning from a function (after the epilogue), you might
+be able to skimp on things saved/restored (usually just registers used to pass
+return values).
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void return_to_handler(void)
+{
+	/* save all state needed by the ABI (see paragraph above) */
+
+	void (*original_return_point)(void) = ftrace_return_to_handler();
+
+	/* restore all state needed by the ABI */
+
+	/* this is usually either a return or a jump */
+	original_return_point();
+}
+#endif
+
+
+HAVE_FTRACE_NMI_ENTER
+---------------------
+
+If you can't trace NMI functions, then skip this option.
+
+<details to be filled>
+
+
+HAVE_FTRACE_SYSCALLS
+---------------------
+
+<details to be filled>
+
+
+HAVE_FTRACE_MCOUNT_RECORD
+-------------------------
+
+See scripts/recordmcount.pl for more info.
+
+<details to be filled>
+
+
+HAVE_DYNAMIC_FTRACE
+---------------------
+
+<details to be filled>

Documentation/trace/ftrace.txt

@@ -26,6 +26,12 @@ disabled, and more (ftrace allows for tracer plugins, which
 means that the list of tracers can always grow).
 
 
+Implementation Details
+----------------------
+
+See ftrace-design.txt for details for arch porters and such.
+
+
 The File System
 ---------------
 
@@ -85,26 +91,19 @@ of ftrace. Here is a list of some of the key files:
 	This file holds the output of the trace in a human
 	readable format (described below).
 
-  latency_trace:
-
-	This file shows the same trace but the information
-	is organized more to display possible latencies
-	in the system (described below).
-
   trace_pipe:
 
 	The output is the same as the "trace" file but this
 	file is meant to be streamed with live tracing.
-	Reads from this file will block until new data
+	Reads from this file will block until new data is
-	is retrieved. Unlike the "trace" and "latency_trace"
+	retrieved.  Unlike the "trace" file, this file is a
-	files, this file is a consumer. This means reading
+	consumer. This means reading from this file causes
-	from this file causes sequential reads to display
+	sequential reads to display more current data. Once
-	more current data. Once data is read from this
+	data is read from this file, it is consumed, and
-	file, it is consumed, and will not be read
+	will not be read again with a sequential read. The
-	again with a sequential read. The "trace" and
+	"trace" file is static, and if the tracer is not
-	"latency_trace" files are static, and if the
+	adding more data,they will display the same
-	tracer is not adding more data, they will display
+	information every time they are read.
-	the same information every time they are read.
 
   trace_options:
 
@@ -117,10 +116,10 @@ of ftrace. Here is a list of some of the key files:
 	Some of the tracers record the max latency.
 	For example, the time interrupts are disabled.
 	This time is saved in this file. The max trace
-	will also be stored, and displayed by either
+	will also be stored, and displayed by "trace".
-	"trace" or "latency_trace".  A new max trace will
+	A new max trace will only be recorded if the
-	only be recorded if the latency is greater than
+	latency is greater than the value in this
-	the value in this file. (in microseconds)
+	file. (in microseconds)
 
   buffer_size_kb:
 
@@ -210,7 +209,7 @@ Here is the list of current tracers that may be configured.
 	the trace with the longest max latency.
 	See tracing_max_latency. When a new max is recorded,
 	it replaces the old trace. It is best to view this
-	trace via the latency_trace file.
+	trace with the latency-format option enabled.
 
   "preemptoff"
 
@@ -307,8 +306,8 @@ the lowest priority thread (pid 0).
 Latency trace format
 --------------------
 
-For traces that display latency times, the latency_trace file
+When the latency-format option is enabled, the trace file gives
-gives somewhat more information to see why a latency happened.
+somewhat more information to see why a latency happened.
 Here is a typical trace.
 
 # tracer: irqsoff
@@ -380,9 +379,10 @@ explains which is which.
 
 The above is mostly meaningful for kernel developers.
 
-  time: This differs from the trace file output. The trace file output
+  time: When the latency-format option is enabled, the trace file
-	includes an absolute timestamp. The timestamp used by the
+	output includes a timestamp relative to the start of the
-	latency_trace file is relative to the start of the trace.
+	trace. This differs from the output when latency-format
+	is disabled, which includes an absolute timestamp.
 
   delay: This is just to help catch your eye a bit better. And
 	 needs to be fixed to be only relative to the same CPU.
@@ -440,7 +440,8 @@ Here are the available options:
   sym-addr:
    bash-4000  [01]  1477.606694: simple_strtoul <c0339346>
 
-  verbose - This deals with the latency_trace file.
+  verbose - This deals with the trace file when the
+            latency-format option is enabled.
 
     bash  4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
     (+0.000ms): simple_strtoul (strict_strtoul)
@@ -472,7 +473,7 @@ Here are the available options:
 		the app is no longer running
 
 		The lookup is performed when you read
-		trace,trace_pipe,latency_trace. Example:
+		trace,trace_pipe. Example:
 
 		a.out-1623  [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
 x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
@@ -481,6 +482,11 @@ x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
 	       every scheduling event. Will add overhead if
 	       there's a lot of tasks running at once.
 
+  latency-format - This option changes the trace. When
+                   it is enabled, the trace displays
+                   additional information about the
+                   latencies, as described in "Latency
+                   trace format".
 
 sched_switch
 ------------
@@ -596,12 +602,13 @@ To reset the maximum, echo 0 into tracing_max_latency. Here is
 an example:
 
  # echo irqsoff > current_tracer
+ # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
  # echo 1 > tracing_enabled
  # ls -ltr
  [...]
  # echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
 # tracer: irqsoff
 #
 irqsoff latency trace v1.1.5 on 2.6.26
@@ -703,12 +710,13 @@ which preemption was disabled. The control of preemptoff tracer
 is much like the irqsoff tracer.
 
  # echo preemptoff > current_tracer
+ # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
  # echo 1 > tracing_enabled
  # ls -ltr
  [...]
  # echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
 # tracer: preemptoff
 #
 preemptoff latency trace v1.1.5 on 2.6.26-rc8
@@ -850,12 +858,13 @@ Again, using this trace is much like the irqsoff and preemptoff
 tracers.
 
  # echo preemptirqsoff > current_tracer
+ # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
  # echo 1 > tracing_enabled
  # ls -ltr
  [...]
  # echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
 # tracer: preemptirqsoff
 #
 preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
@@ -1012,11 +1021,12 @@ Instead of performing an 'ls', we will run 'sleep 1' under
 'chrt' which changes the priority of the task.
 
  # echo wakeup > current_tracer
+ # echo latency-format > trace_options
  # echo 0 > tracing_max_latency
  # echo 1 > tracing_enabled
  # chrt -f 5 sleep 1
  # echo 0 > tracing_enabled
- # cat latency_trace
+ # cat trace
 # tracer: wakeup
 #
 wakeup latency trace v1.1.5 on 2.6.26-rc8

Documentation/trace/function-graph-fold.vim

@@ -0,0 +1,42 @@
+" Enable folding for ftrace function_graph traces.
+"
+" To use, :source this file while viewing a function_graph trace, or use vim's
+" -S option to load from the command-line together with a trace.  You can then
+" use the usual vim fold commands, such as "za", to open and close nested
+" functions.  While closed, a fold will show the total time taken for a call,
+" as would normally appear on the line with the closing brace.  Folded
+" functions will not include finish_task_switch(), so folding should remain
+" relatively sane even through a context switch.
+"
+" Note that this will almost certainly only work well with a
+" single-CPU trace (e.g. trace-cmd report --cpu 1).
+
+function! FunctionGraphFoldExpr(lnum)
+  let line = getline(a:lnum)
+  if line[-1:] == '{'
+    if line =~ 'finish_task_switch() {$'
+      return '>1'
+    endif
+    return 'a1'
+  elseif line[-1:] == '}'
+    return 's1'
+  else
+    return '='
+  endif
+endfunction
+
+function! FunctionGraphFoldText()
+  let s = split(getline(v:foldstart), '|', 1)
+  if getline(v:foldend+1) =~ 'finish_task_switch() {$'
+    let s[2] = ' task switch  '
+  else
+    let e = split(getline(v:foldend), '|', 1)
+    let s[2] = e[2]
+  endif
+  return join(s, '|')
+endfunction
+
+setlocal foldexpr=FunctionGraphFoldExpr(v:lnum)
+setlocal foldtext=FunctionGraphFoldText()
+setlocal foldcolumn=12
+setlocal foldmethod=expr

Documentation/trace/ring-buffer-design.txt

@@ -0,0 +1,955 @@
+		Lockless Ring Buffer Design
+		===========================
+
+Copyright 2009 Red Hat Inc.
+   Author:   Steven Rostedt <srostedt@redhat.com>
+  License:   The GNU Free Documentation License, Version 1.2
+               (dual licensed under the GPL v2)
+Reviewers:   Mathieu Desnoyers, Huang Ying, Hidetoshi Seto,
+	     and Frederic Weisbecker.
+
+
+Written for: 2.6.31
+
+Terminology used in this Document
+---------------------------------
+
+tail - where new writes happen in the ring buffer.
+
+head - where new reads happen in the ring buffer.
+
+producer - the task that writes into the ring buffer (same as writer)
+
+writer - same as producer
+
+consumer - the task that reads from the buffer (same as reader)
+
+reader - same as consumer.
+
+reader_page - A page outside the ring buffer used solely (for the most part)
+    by the reader.
+
+head_page - a pointer to the page that the reader will use next
+
+tail_page - a pointer to the page that will be written to next
+
+commit_page - a pointer to the page with the last finished non nested write.
+
+cmpxchg - hardware assisted atomic transaction that performs the following:
+
+   A = B iff previous A == C
+
+   R = cmpxchg(A, C, B) is saying that we replace A with B if and only if
+      current A is equal to C, and we put the old (current) A into R
+
+   R gets the previous A regardless if A is updated with B or not.
+
+   To see if the update was successful a compare of R == C may be used.
+
+The Generic Ring Buffer
+-----------------------
+
+The ring buffer can be used in either an overwrite mode or in
+producer/consumer mode.
+
+Producer/consumer mode is where the producer were to fill up the
+buffer before the consumer could free up anything, the producer
+will stop writing to the buffer. This will lose most recent events.
+
+Overwrite mode is where the produce were to fill up the buffer
+before the consumer could free up anything, the producer will
+overwrite the older data. This will lose the oldest events.
+
+No two writers can write at the same time (on the same per cpu buffer),
+but a writer may interrupt another writer, but it must finish writing
+before the previous writer may continue. This is very important to the
+algorithm. The writers act like a "stack". The way interrupts works
+enforces this behavior.
+
+
+  writer1 start
+     <preempted> writer2 start
+         <preempted> writer3 start
+                     writer3 finishes
+                 writer2 finishes
+  writer1 finishes
+
+This is very much like a writer being preempted by an interrupt and
+the interrupt doing a write as well.
+
+Readers can happen at any time. But no two readers may run at the
+same time, nor can a reader preempt/interrupt another reader. A reader
+can not preempt/interrupt a writer, but it may read/consume from the
+buffer at the same time as a writer is writing, but the reader must be
+on another processor to do so. A reader may read on its own processor
+and can be preempted by a writer.
+
+A writer can preempt a reader, but a reader can not preempt a writer.
+But a reader can read the buffer at the same time (on another processor)
+as a writer.
+
+The ring buffer is made up of a list of pages held together by a link list.
+
+At initialization a reader page is allocated for the reader that is not
+part of the ring buffer.
+
+The head_page, tail_page and commit_page are all initialized to point
+to the same page.
+
+The reader page is initialized to have its next pointer pointing to
+the head page, and its previous pointer pointing to a page before
+the head page.
+
+The reader has its own page to use. At start up time, this page is
+allocated but is not attached to the list. When the reader wants
+to read from the buffer, if its page is empty (like it is on start up)
+it will swap its page with the head_page. The old reader page will
+become part of the ring buffer and the head_page will be removed.
+The page after the inserted page (old reader_page) will become the
+new head page.
+
+Once the new page is given to the reader, the reader could do what
+it wants with it, as long as a writer has left that page.
+
+A sample of how the reader page is swapped: Note this does not
+show the head page in the buffer, it is for demonstrating a swap
+only.
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |
+  +------+
+                  +---+   +---+   +---+
+                  |   |-->|   |-->|   |
+                  |   |<--|   |<--|   |
+                  +---+   +---+   +---+
+                   ^ |             ^ |
+                   | +-------------+ |
+                   +-----------------+
+
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |-------------------+
+  +------+                   v
+    |             +---+   +---+   +---+
+    |             |   |-->|   |-->|   |
+    |             |   |<--|   |<--|   |<-+
+    |             +---+   +---+   +---+  |
+    |              ^ |             ^ |   |
+    |              | +-------------+ |   |
+    |              +-----------------+   |
+    +------------------------------------+
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |-------------------+
+  +------+ <---------------+ v
+    |  ^          +---+   +---+   +---+
+    |  |          |   |-->|   |-->|   |
+    |  |          |   |   |   |<--|   |<-+
+    |  |          +---+   +---+   +---+  |
+    |  |             |             ^ |   |
+    |  |             +-------------+ |   |
+    |  +-----------------------------+   |
+    +------------------------------------+
+
+  +------+
+  |buffer|          RING BUFFER
+  |page  |-------------------+
+  +------+ <---------------+ v
+    |  ^          +---+   +---+   +---+
+    |  |          |   |   |   |-->|   |
+    |  |  New     |   |   |   |<--|   |<-+
+    |  | Reader   +---+   +---+   +---+  |
+    |  |  page ----^                 |   |
+    |  |                             |   |
+    |  +-----------------------------+   |
+    +------------------------------------+
+
+
+
+It is possible that the page swapped is the commit page and the tail page,
+if what is in the ring buffer is less than what is held in a buffer page.
+
+
+          reader page    commit page   tail page
+              |              |             |
+              v              |             |
+             +---+           |             |
+             |   |<----------+             |
+             |   |<------------------------+
+             |   |------+
+             +---+      |
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+This case is still valid for this algorithm.
+When the writer leaves the page, it simply goes into the ring buffer
+since the reader page still points to the next location in the ring
+buffer.
+
+
+The main pointers:
+
+  reader page - The page used solely by the reader and is not part
+                of the ring buffer (may be swapped in)
+
+  head page - the next page in the ring buffer that will be swapped
+              with the reader page.
+
+  tail page - the page where the next write will take place.
+
+  commit page - the page that last finished a write.
+
+The commit page only is updated by the outer most writer in the
+writer stack. A writer that preempts another writer will not move the
+commit page.
+
+When data is written into the ring buffer, a position is reserved
+in the ring buffer and passed back to the writer. When the writer
+is finished writing data into that position, it commits the write.
+
+Another write (or a read) may take place at anytime during this
+transaction. If another write happens it must finish before continuing
+with the previous write.
+
+
+   Write reserve:
+
+       Buffer page
+      +---------+
+      |written  |
+      +---------+  <--- given back to writer (current commit)
+      |reserved |
+      +---------+ <--- tail pointer
+      | empty   |
+      +---------+
+
+   Write commit:
+
+       Buffer page
+      +---------+
+      |written  |
+      +---------+
+      |written  |
+      +---------+  <--- next positon for write (current commit)
+      | empty   |
+      +---------+
+
+
+ If a write happens after the first reserve:
+
+       Buffer page
+      +---------+
+      |written  |
+      +---------+  <-- current commit
+      |reserved |
+      +---------+  <--- given back to second writer
+      |reserved |
+      +---------+ <--- tail pointer
+
+  After second writer commits:
+
+
+       Buffer page
+      +---------+
+      |written  |
+      +---------+  <--(last full commit)
+      |reserved |
+      +---------+
+      |pending  |
+      |commit   |
+      +---------+ <--- tail pointer
+
+  When the first writer commits:
+
+       Buffer page
+      +---------+
+      |written  |
+      +---------+
+      |written  |
+      +---------+
+      |written  |
+      +---------+  <--(last full commit and tail pointer)
+
+
+The commit pointer points to the last write location that was
+committed without preempting another write. When a write that
+preempted another write is committed, it only becomes a pending commit
+and will not be a full commit till all writes have been committed.
+
+The commit page points to the page that has the last full commit.
+The tail page points to the page with the last write (before
+committing).
+
+The tail page is always equal to or after the commit page. It may
+be several pages ahead. If the tail page catches up to the commit
+page then no more writes may take place (regardless of the mode
+of the ring buffer: overwrite and produce/consumer).
+
+The order of pages are:
+
+ head page
+ commit page
+ tail page
+
+Possible scenario:
+                             tail page
+  head page         commit page  |
+      |                 |        |
+      v                 v        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+There is a special case that the head page is after either the commit page
+and possibly the tail page. That is when the commit (and tail) page has been
+swapped with the reader page. This is because the head page is always
+part of the ring buffer, but the reader page is not. When ever there
+has been less than a full page that has been committed inside the ring buffer,
+and a reader swaps out a page, it will be swapping out the commit page.
+
+
+          reader page    commit page   tail page
+              |              |             |
+              v              |             |
+             +---+           |             |
+             |   |<----------+             |
+             |   |<------------------------+
+             |   |------+
+             +---+      |
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+                        ^
+                        |
+                    head page
+
+
+In this case, the head page will not move when the tail and commit
+move back into the ring buffer.
+
+The reader can not swap a page into the ring buffer if the commit page
+is still on that page. If the read meets the last commit (real commit
+not pending or reserved), then there is nothing more to read.
+The buffer is considered empty until another full commit finishes.
+
+When the tail meets the head page, if the buffer is in overwrite mode,
+the head page will be pushed ahead one. If the buffer is in producer/consumer
+mode, the write will fail.
+
+Overwrite mode:
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+                        ^
+                        |
+                    head page
+
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+                                 ^
+                                 |
+                             head page
+
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+                                 ^
+                                 |
+                             head page
+
+Note, the reader page will still point to the previous head page.
+But when a swap takes place, it will use the most recent head page.
+
+
+Making the Ring Buffer Lockless:
+--------------------------------
+
+The main idea behind the lockless algorithm is to combine the moving
+of the head_page pointer with the swapping of pages with the reader.
+State flags are placed inside the pointer to the page. To do this,
+each page must be aligned in memory by 4 bytes. This will allow the 2
+least significant bits of the address to be used as flags. Since
+they will always be zero for the address. To get the address,
+simply mask out the flags.
+
+  MASK = ~3
+
+  address & MASK
+
+Two flags will be kept by these two bits:
+
+   HEADER - the page being pointed to is a head page
+
+   UPDATE - the page being pointed to is being updated by a writer
+          and was or is about to be a head page.
+
+
+          reader page
+              |
+              v
+             +---+
+             |   |------+
+             +---+      |
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-H->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+
+The above pointer "-H->" would have the HEADER flag set. That is
+the next page is the next page to be swapped out by the reader.
+This pointer means the next page is the head page.
+
+When the tail page meets the head pointer, it will use cmpxchg to
+change the pointer to the UPDATE state:
+
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-H->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+"-U->" represents a pointer in the UPDATE state.
+
+Any access to the reader will need to take some sort of lock to serialize
+the readers. But the writers will never take a lock to write to the
+ring buffer. This means we only need to worry about a single reader,
+and writes only preempt in "stack" formation.
+
+When the reader tries to swap the page with the ring buffer, it
+will also use cmpxchg. If the flag bit in the pointer to the
+head page does not have the HEADER flag set, the compare will fail
+and the reader will need to look for the new head page and try again.
+Note, the flag UPDATE and HEADER are never set at the same time.
+
+The reader swaps the reader page as follows:
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |
+  +------+
+                  +---+    +---+    +---+
+                  |   |--->|   |--->|   |
+                  |   |<---|   |<---|   |
+                  +---+    +---+    +---+
+                   ^ |               ^ |
+                   | +---------------+ |
+                   +-----H-------------+
+
+The reader sets the reader page next pointer as HEADER to the page after
+the head page.
+
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |-------H-----------+
+  +------+                   v
+    |             +---+    +---+    +---+
+    |             |   |--->|   |--->|   |
+    |             |   |<---|   |<---|   |<-+
+    |             +---+    +---+    +---+  |
+    |              ^ |               ^ |   |
+    |              | +---------------+ |   |
+    |              +-----H-------------+   |
+    +--------------------------------------+
+
+It does a cmpxchg with the pointer to the previous head page to make it
+point to the reader page. Note that the new pointer does not have the HEADER
+flag set.  This action atomically moves the head page forward.
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |-------H-----------+
+  +------+                   v
+    |  ^          +---+   +---+   +---+
+    |  |          |   |-->|   |-->|   |
+    |  |          |   |<--|   |<--|   |<-+
+    |  |          +---+   +---+   +---+  |
+    |  |             |             ^ |   |
+    |  |             +-------------+ |   |
+    |  +-----------------------------+   |
+    +------------------------------------+
+
+After the new head page is set, the previous pointer of the head page is
+updated to the reader page.
+
+  +------+
+  |reader|          RING BUFFER
+  |page  |-------H-----------+
+  +------+ <---------------+ v
+    |  ^          +---+   +---+   +---+
+    |  |          |   |-->|   |-->|   |
+    |  |          |   |   |   |<--|   |<-+
+    |  |          +---+   +---+   +---+  |
+    |  |             |             ^ |   |
+    |  |             +-------------+ |   |
+    |  +-----------------------------+   |
+    +------------------------------------+
+
+  +------+
+  |buffer|          RING BUFFER
+  |page  |-------H-----------+  <--- New head page
+  +------+ <---------------+ v
+    |  ^          +---+   +---+   +---+
+    |  |          |   |   |   |-->|   |
+    |  |  New     |   |   |   |<--|   |<-+
+    |  | Reader   +---+   +---+   +---+  |
+    |  |  page ----^                 |   |
+    |  |                             |   |
+    |  +-----------------------------+   |
+    +------------------------------------+
+
+Another important point. The page that the reader page points back to
+by its previous pointer (the one that now points to the new head page)
+never points back to the reader page. That is because the reader page is
+not part of the ring buffer. Traversing the ring buffer via the next pointers
+will always stay in the ring buffer. Traversing the ring buffer via the
+prev pointers may not.
+
+Note, the way to determine a reader page is simply by examining the previous
+pointer of the page. If the next pointer of the previous page does not
+point back to the original page, then the original page is a reader page:
+
+
+             +--------+
+             | reader |  next   +----+
+             |  page  |-------->|    |<====== (buffer page)
+             +--------+         +----+
+                 |                | ^
+                 |                v | next
+            prev |              +----+
+                 +------------->|    |
+                                +----+
+
+The way the head page moves forward:
+
+When the tail page meets the head page and the buffer is in overwrite mode
+and more writes take place, the head page must be moved forward before the
+writer may move the tail page. The way this is done is that the writer
+performs a cmpxchg to convert the pointer to the head page from the HEADER
+flag to have the UPDATE flag set. Once this is done, the reader will
+not be able to swap the head page from the buffer, nor will it be able to
+move the head page, until the writer is finished with the move.
+
+This eliminates any races that the reader can have on the writer. The reader
+must spin, and this is why the reader can not preempt the writer.
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-H->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The following page will be made into the new head page.
+
+           tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+After the new head page has been set, we can set the old head page
+pointer back to NORMAL.
+
+           tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+After the head page has been moved, the tail page may now move forward.
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+
+The above are the trivial updates. Now for the more complex scenarios.
+
+
+As stated before, if enough writes preempt the first write, the
+tail page may make it all the way around the buffer and meet the commit
+page. At this time, we must start dropping writes (usually with some kind
+of warning to the user). But what happens if the commit was still on the
+reader page? The commit page is not part of the ring buffer. The tail page
+must account for this.
+
+
+          reader page    commit page
+              |              |
+              v              |
+             +---+           |
+             |   |<----------+
+             |   |
+             |   |------+
+             +---+      |
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-H->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+               ^
+               |
+           tail page
+
+If the tail page were to simply push the head page forward, the commit when
+leaving the reader page would not be pointing to the correct page.
+
+The solution to this is to test if the commit page is on the reader page
+before pushing the head page. If it is, then it can be assumed that the
+tail page wrapped the buffer, and we must drop new writes.
+
+This is not a race condition, because the commit page can only be moved
+by the outter most writer (the writer that was preempted).
+This means that the commit will not move while a writer is moving the
+tail page. The reader can not swap the reader page if it is also being
+used as the commit page. The reader can simply check that the commit
+is off the reader page. Once the commit page leaves the reader page
+it will never go back on it unless a reader does another swap with the
+buffer page that is also the commit page.
+
+
+Nested writes
+-------------
+
+In the pushing forward of the tail page we must first push forward
+the head page if the head page is the next page. If the head page
+is not the next page, the tail page is simply updated with a cmpxchg.
+
+Only writers move the tail page. This must be done atomically to protect
+against nested writers.
+
+  temp_page = tail_page
+  next_page = temp_page->next
+  cmpxchg(tail_page, temp_page, next_page)
+
+The above will update the tail page if it is still pointing to the expected
+page. If this fails, a nested write pushed it forward, the the current write
+does not need to push it.
+
+
+           temp page
+               |
+               v
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+Nested write comes in and moves the tail page forward:
+
+                    tail page (moved by nested writer)
+            temp page   |
+               |        |
+               v        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The above would fail the cmpxchg, but since the tail page has already
+been moved forward, the writer will just try again to reserve storage
+on the new tail page.
+
+But the moving of the head page is a bit more complex.
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-H->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The write converts the head page pointer to UPDATE.
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+But if a nested writer preempts here. It will see that the next
+page is a head page, but it is also nested. It will detect that
+it is nested and will save that information. The detection is the
+fact that it sees the UPDATE flag instead of a HEADER or NORMAL
+pointer.
+
+The nested writer will set the new head page pointer.
+
+           tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+But it will not reset the update back to normal. Only the writer
+that converted a pointer from HEAD to UPDATE will convert it back
+to NORMAL.
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+After the nested writer finishes, the outer most writer will convert
+the UPDATE pointer to NORMAL.
+
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+
+It can be even more complex if several nested writes came in and moved
+the tail page ahead several pages:
+
+
+(first writer)
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-H->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The write converts the head page pointer to UPDATE.
+
+            tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+Next writer comes in, and sees the update and sets up the new
+head page.
+
+(second writer)
+
+           tail page
+               |
+               v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The nested writer moves the tail page forward. But does not set the old
+update page to NORMAL because it is not the outer most writer.
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+Another writer preempts and sees the page after the tail page is a head page.
+It changes it from HEAD to UPDATE.
+
+(third writer)
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-U->|   |--->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The writer will move the head page forward:
+
+
+(third writer)
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-U->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+But now that the third writer did change the HEAD flag to UPDATE it
+will convert it to normal:
+
+
+(third writer)
+
+                    tail page
+                        |
+                        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+
+Then it will move the tail page, and return back to the second writer.
+
+
+(second writer)
+
+                             tail page
+                                 |
+                                 v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+
+The second writer will fail to move the tail page because it was already
+moved, so it will try again and add its data to the new tail page.
+It will return to the first writer.
+
+
+(first writer)
+
+                             tail page
+                                 |
+                                 v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+The first writer can not know atomically test if the tail page moved
+while it updates the HEAD page. It will then update the head page to
+what it thinks is the new head page.
+
+
+(first writer)
+
+                             tail page
+                                 |
+                                 v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+Since the cmpxchg returns the old value of the pointer the first writer
+will see it succeeded in updating the pointer from NORMAL to HEAD.
+But as we can see, this is not good enough. It must also check to see
+if the tail page is either where it use to be or on the next page:
+
+
+(first writer)
+
+               A        B    tail page
+               |        |        |
+               v        v        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |-H->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+If tail page != A and tail page does not equal B, then it must reset the
+pointer back to NORMAL. The fact that it only needs to worry about
+nested writers, it only needs to check this after setting the HEAD page.
+
+
+(first writer)
+
+               A        B    tail page
+               |        |        |
+               v        v        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |-U->|   |--->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+
+Now the writer can update the head page. This is also why the head page must
+remain in UPDATE and only reset by the outer most writer. This prevents
+the reader from seeing the incorrect head page.
+
+
+(first writer)
+
+               A        B    tail page
+               |        |        |
+               v        v        v
+    +---+    +---+    +---+    +---+
+<---|   |--->|   |--->|   |--->|   |-H->
+--->|   |<---|   |<---|   |<---|   |<---
+    +---+    +---+    +---+    +---+
+

Documentation/vgaarbiter.txt

@@ -0,0 +1,194 @@
+
+VGA Arbiter
+===========
+
+Graphic devices are accessed through ranges in I/O or memory space. While most
+modern devices allow relocation of such ranges, some "Legacy" VGA devices
+implemented on PCI will typically have the same "hard-decoded" addresses as
+they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994
+Standard for Boot (Initialization Configuration) Firmware Revision 2.1"
+Section 7, Legacy Devices.
+
+The Resource Access Control (RAC) module inside the X server [0] existed for
+the legacy VGA arbitration task (besides other bus management tasks) when more
+than one legacy device co-exists on the same machine. But the problem happens
+when these devices are trying to be accessed by different userspace clients
+(e.g. two server in parallel). Their address assignments conflict. Moreover,
+ideally, being an userspace application, it is not the role of the the X
+server to control bus resources. Therefore an arbitration scheme outside of
+the X server is needed to control the sharing of these resources. This
+document introduces the operation of the VGA arbiter implemented for Linux
+kernel.
+
+----------------------------------------------------------------------------
+
+I.  Details and Theory of Operation
+        I.1 vgaarb
+        I.2 libpciaccess
+        I.3 xf86VGAArbiter (X server implementation)
+II. Credits
+III.References
+
+
+I. Details and Theory of Operation
+==================================
+
+I.1 vgaarb
+----------
+
+The vgaarb is a module of the Linux Kernel. When it is initially loaded, it
+scans all PCI devices and adds the VGA ones inside the arbitration. The
+arbiter then enables/disables the decoding on different devices of the VGA
+legacy instructions. Device which do not want/need to use the arbiter may
+explicitly tell it by calling vga_set_legacy_decoding().
+
+The kernel exports a char device interface (/dev/vga_arbiter) to the clients,
+which has the following semantics:
+
+ open       : open user instance of the arbiter. By default, it's attached to
+              the default VGA device of the system.
+
+ close      : close user instance. Release locks made by the user
+
+ read       : return a string indicating the status of the target like:
+
+              "<card_ID>,decodes=<io_state>,owns=<io_state>,locks=<io_state> (ic,mc)"
+
+              An IO state string is of the form {io,mem,io+mem,none}, mc and
+              ic are respectively mem and io lock counts (for debugging/
+              diagnostic only). "decodes" indicate what the card currently
+              decodes, "owns" indicates what is currently enabled on it, and
+              "locks" indicates what is locked by this card. If the card is
+              unplugged, we get "invalid" then for card_ID and an -ENODEV
+              error is returned for any command until a new card is targeted.
+
+
+ write       : write a command to the arbiter. List of commands:
+
+  target <card_ID>   : switch target to card <card_ID> (see below)
+  lock <io_state>    : acquires locks on target ("none" is an invalid io_state)
+  trylock <io_state> : non-blocking acquire locks on target (returns EBUSY if
+                       unsuccessful)
+  unlock <io_state>  : release locks on target
+  unlock all         : release all locks on target held by this user (not
+                       implemented yet)
+  decodes <io_state> : set the legacy decoding attributes for the card
+
+  poll               : event if something changes on any card (not just the
+                       target)
+
+  card_ID is of the form "PCI:domain:bus:dev.fn". It can be set to "default"
+  to go back to the system default card (TODO: not implemented yet). Currently,
+  only PCI is supported as a prefix, but the userland API may support other bus
+  types in the future, even if the current kernel implementation doesn't.
+
+Note about locks:
+
+The driver keeps track of which user has which locks on which card. It
+supports stacking, like the kernel one. This complexifies the implementation
+a bit, but makes the arbiter more tolerant to user space problems and able
+to properly cleanup in all cases when a process dies.
+Currently, a max of 16 cards can have locks simultaneously issued from
+user space for a given user (file descriptor instance) of the arbiter.
+
+In the case of devices hot-{un,}plugged, there is a hook - pci_notify() - to
+notify them being added/removed in the system and automatically added/removed
+in the arbiter.
+
+There's also a in-kernel API of the arbiter in the case of DRM, vgacon and
+others which may use the arbiter.
+
+
+I.2 libpciaccess
+----------------
+
+To use the vga arbiter char device it was implemented an API inside the
+libpciaccess library. One fieldd was added to struct pci_device (each device
+on the system):
+
+    /* the type of resource decoded by the device */
+    int vgaarb_rsrc;
+
+Besides it, in pci_system were added:
+
+    int vgaarb_fd;
+    int vga_count;
+    struct pci_device *vga_target;
+    struct pci_device *vga_default_dev;
+
+
+The vga_count is usually need to keep informed how many cards are being
+arbitrated, so for instance if there's only one then it can totally escape the
+scheme.
+
+
+These functions below acquire VGA resources for the given card and mark those
+resources as locked. If the resources requested are "normal" (and not legacy)
+resources, the arbiter will first check whether the card is doing legacy
+decoding for that type of resource. If yes, the lock is "converted" into a
+legacy resource lock. The arbiter will first look for all VGA cards that
+might conflict and disable their IOs and/or Memory access, including VGA
+forwarding on P2P bridges if necessary, so that the requested resources can
+be used. Then, the card is marked as locking these resources and the IO and/or
+Memory access is enabled on the card (including VGA forwarding on parent
+P2P bridges if any). In the case of vga_arb_lock(), the function will block
+if some conflicting card is already locking one of the required resources (or
+any resource on a different bus segment, since P2P bridges don't differentiate
+VGA memory and IO afaik). If the card already owns the resources, the function
+succeeds.  vga_arb_trylock() will return (-EBUSY) instead of blocking. Nested
+calls are supported (a per-resource counter is maintained).
+
+
+Set the target device of this client.
+    int  pci_device_vgaarb_set_target   (struct pci_device *dev);
+
+
+For instance, in x86 if two devices on the same bus want to lock different
+resources, both will succeed (lock). If devices are in different buses and
+trying to lock different resources, only the first who tried succeeds.
+    int  pci_device_vgaarb_lock         (void);
+    int  pci_device_vgaarb_trylock      (void);
+
+Unlock resources of device.
+    int  pci_device_vgaarb_unlock       (void);
+
+Indicates to the arbiter if the card decodes legacy VGA IOs, legacy VGA
+Memory, both, or none. All cards default to both, the card driver (fbdev for
+example) should tell the arbiter if it has disabled legacy decoding, so the
+card can be left out of the arbitration process (and can be safe to take
+interrupts at any time.
+    int  pci_device_vgaarb_decodes      (int new_vgaarb_rsrc);
+
+Connects to the arbiter device, allocates the struct
+    int  pci_device_vgaarb_init         (void);
+
+Close the connection
+    void pci_device_vgaarb_fini         (void);
+
+
+I.3 xf86VGAArbiter (X server implementation)
+--------------------------------------------
+
+(TODO)
+
+X server basically wraps all the functions that touch VGA registers somehow.
+
+
+II. Credits
+===========
+
+Benjamin Herrenschmidt (IBM?) started this work when he discussed such design
+with the Xorg community in 2005 [1, 2]. In the end of 2007, Paulo Zanoni and
+Tiago Vignatti (both of C3SL/Federal University of Paraná) proceeded his work
+enhancing the kernel code to adapt as a kernel module and also did the
+implementation of the user space side [3]. Now (2009) Tiago Vignatti and Dave
+Airlie finally put this work in shape and queued to Jesse Barnes' PCI tree.
+
+
+III. References
+==============
+
+[0] http://cgit.freedesktop.org/xorg/xserver/commit/?id=4b42448a2388d40f257774fbffdccaea87bd0347
+[1] http://lists.freedesktop.org/archives/xorg/2005-March/006663.html
+[2] http://lists.freedesktop.org/archives/xorg/2005-March/006745.html
+[3] http://lists.freedesktop.org/archives/xorg/2007-October/029507.html

Documentation/video4linux/CARDLIST.cx23885

@@ -21,3 +21,5 @@
  20 -> Hauppauge WinTV-HVR1255                             [0070:2251]
  21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
  22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
+ 23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
+ 24 -> Hauppauge WinTV-HVR1850                             [0070:8541]

Documentation/video4linux/CARDLIST.cx88

@@ -80,3 +80,4 @@
  79 -> Terratec Cinergy HT PCI MKII                        [153b:1177]
  80 -> Hauppauge WinTV-IR Only                             [0070:9290]
  81 -> Leadtek WinFast DTV1800 Hybrid                      [107d:6654]
+ 82 -> WinFast DTV2000 H rev. J                            [107d:6f2b]

Documentation/video4linux/CARDLIST.em28xx

@@ -7,7 +7,7 @@
   6 -> Terratec Cinergy 200 USB                 (em2800)
   7 -> Leadtek Winfast USB II                   (em2800)        [0413:6023]
   8 -> Kworld USB2800                           (em2800)
-  9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,2304:0207,2304:021a]
+  9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker  (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
  11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
@@ -33,7 +33,7 @@
  34 -> Terratec Cinergy A Hybrid XS             (em2860)        [0ccd:004f]
  35 -> Typhoon DVD Maker                        (em2860)
  36 -> NetGMBH Cam                              (em2860)
- 37 -> Gadmei UTV330                            (em2860)
+ 37 -> Gadmei UTV330                            (em2860)        [eb1a:50a6]
  38 -> Yakumo MovieMixer                        (em2861)
  39 -> KWorld PVRTV 300U                        (em2861)        [eb1a:e300]
  40 -> Plextor ConvertX PX-TV100U               (em2861)        [093b:a005]
@@ -67,3 +67,4 @@
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
  71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)
+ 72 -> Gadmei UTV330+                           (em2861)

Documentation/video4linux/CARDLIST.saa7134

@@ -167,3 +167,7 @@
 166 -> Beholder BeholdTV 607 RDS                [5ace:6073]
 167 -> Beholder BeholdTV 609 RDS                [5ace:6092]
 168 -> Beholder BeholdTV 609 RDS                [5ace:6093]
+169 -> Compro VideoMate S350/S300               [185b:c900]
+170 -> AverMedia AverTV Studio 505              [1461:a115]
+171 -> Beholder BeholdTV X7                     [5ace:7595]
+172 -> RoverMedia TV Link Pro FM                [19d1:0138]

Documentation/video4linux/CARDLIST.tuner

@@ -78,3 +78,4 @@ tuner=77 - TCL tuner MF02GIP-5N-E
 tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner
 tuner=79 - Philips PAL/SECAM multi (FM1216 MK5)
 tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
+tuner=81 - Partsnic (Daewoo) PTI-5NF05

Documentation/video4linux/CQcam.txt

@@ -18,8 +18,8 @@ Table of Contents
 
 1.0 Introduction
 
-  The file ../drivers/char/c-qcam.c is a device driver for the
+  The file ../../drivers/media/video/c-qcam.c is a device driver for
-Logitech (nee Connectix) parallel port interface color CCD camera.
+the Logitech (nee Connectix) parallel port interface color CCD camera.
 This is a fairly inexpensive device for capturing images.  Logitech
 does not currently provide information for developers, but many people
 have engineered several solutions for non-Microsoft use of the Color

Documentation/video4linux/gspca.txt

@@ -140,6 +140,7 @@ spca500		04fc:7333	PalmPixDC85
 sunplus		04fc:ffff	Pure DigitalDakota
 spca501		0506:00df	3Com HomeConnect Lite
 sunplus		052b:1513	Megapix V4
+sunplus		052b:1803	MegaImage VI
 tv8532		0545:808b	Veo Stingray
 tv8532		0545:8333	Veo Stingray
 sunplus		0546:3155	Polaroid PDC3070
@@ -182,6 +183,7 @@ ov534		06f8:3002	Hercules Blog Webcam
 ov534		06f8:3003	Hercules Dualpix HD Weblog
 sonixj		06f8:3004	Hercules Classic Silver
 sonixj		06f8:3008	Hercules Deluxe Optical Glass
+pac7311		06f8:3009	Hercules Classic Link
 spca508		0733:0110	ViewQuest VQ110
 spca508		0130:0130	Clone Digital Webcam 11043
 spca501		0733:0401	Intel Create and Share
@@ -235,8 +237,10 @@ pac7311		093a:2621	PAC731x
 pac7311		093a:2622	Genius Eye 312
 pac7311		093a:2624	PAC7302
 pac7311		093a:2626	Labtec 2200
+pac7311		093a:2629	Genious iSlim 300
 pac7311		093a:262a	Webcam 300k
 pac7311		093a:262c	Philips SPC 230 NC
+jeilinj		0979:0280	Sakar 57379
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
@@ -247,6 +251,7 @@ zc3xx		0ac8:305b	Z-star Vimicro zc0305b
 zc3xx		0ac8:307b	Ldlc VC302+Ov7620
 vc032x		0ac8:c001	Sony embedded vimicro
 vc032x		0ac8:c002	Sony embedded vimicro
+vc032x		0ac8:c301	Samsung Q1 Ultra Premium
 spca508		0af9:0010	Hama USB Sightcam 100
 spca508		0af9:0011	Hama USB Sightcam 100
 sonixb		0c45:6001	Genius VideoCAM NB
@@ -284,6 +289,7 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sonixj		0c45:6148	Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
 sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
 sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
 sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)

Documentation/video4linux/si4713.txt

@@ -0,0 +1,176 @@
+Driver for I2C radios for the Silicon Labs Si4713 FM Radio Transmitters
+
+Copyright (c) 2009 Nokia Corporation
+Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+
+
+Information about the Device
+============================
+This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address.
+Basically, it has transmission and signal noise level measurement features.
+
+The Si4713 integrates transmit functions for FM broadcast stereo transmission.
+The chip also allows integrated receive power scanning to identify low signal
+power FM channels.
+
+The chip is programmed using commands and responses. There are also several
+properties which can change the behavior of this chip.
+
+Users must comply with local regulations on radio frequency (RF) transmission.
+
+Device driver description
+=========================
+There are two modules to handle this device. One is a I2C device driver
+and the other is a platform driver.
+
+The I2C device driver exports a v4l2-subdev interface to the kernel.
+All properties can also be accessed by v4l2 extended controls interface, by
+using the v4l2-subdev calls (g_ext_ctrls, s_ext_ctrls).
+
+The platform device driver exports a v4l2 radio device interface to user land.
+So, it uses the I2C device driver as a sub device in order to send the user
+commands to the actual device. Basically it is a wrapper to the I2C device driver.
+
+Applications can use v4l2 radio API to specify frequency of operation, mute state,
+etc. But mostly of its properties will be present in the extended controls.
+
+When the v4l2 mute property is set to 1 (true), the driver will turn the chip off.
+
+Properties description
+======================
+
+The properties can be accessed using v4l2 extended controls.
+Here is an output from v4l2-ctl util:
+/ # v4l2-ctl -d /dev/radio0 --all -L
+Driver Info:
+	Driver name   : radio-si4713
+	Card type     : Silicon Labs Si4713 Modulator
+	Bus info      :
+	Driver version: 0
+	Capabilities  : 0x00080800
+		RDS Output
+		Modulator
+Audio output: 0 (FM Modulator Audio Out)
+Frequency: 1408000 (88.000000 MHz)
+Video Standard = 0x00000000
+Modulator:
+	Name                 : FM Modulator
+	Capabilities         : 62.5 Hz stereo rds
+	Frequency range      : 76.0 MHz - 108.0 MHz
+	Subchannel modulation: stereo+rds
+
+User Controls
+
+			   mute (bool) : default=1 value=0
+
+FM Radio Modulator Controls
+
+	   rds_signal_deviation (int)  : min=0 max=90000 step=10 default=200 value=200 flags=slider
+		 rds_program_id (int)  : min=0 max=65535 step=1 default=0 value=0
+	       rds_program_type (int)  : min=0 max=31 step=1 default=0 value=0
+		    rds_ps_name (str)  : min=0 max=96 step=8 value='si4713  '
+		 rds_radio_text (str)  : min=0 max=384 step=32 value=''
+  audio_limiter_feature_enabled (bool) : default=1 value=1
+     audio_limiter_release_time (int)  : min=250 max=102390 step=50 default=5010 value=5010 flags=slider
+	audio_limiter_deviation (int)  : min=0 max=90000 step=10 default=66250 value=66250 flags=slider
+audio_compression_feature_enabl (bool) : default=1 value=1
+	 audio_compression_gain (int)  : min=0 max=20 step=1 default=15 value=15 flags=slider
+    audio_compression_threshold (int)  : min=-40 max=0 step=1 default=-40 value=-40 flags=slider
+  audio_compression_attack_time (int)  : min=0 max=5000 step=500 default=0 value=0 flags=slider
+ audio_compression_release_time (int)  : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider
+     pilot_tone_feature_enabled (bool) : default=1 value=1
+	   pilot_tone_deviation (int)  : min=0 max=90000 step=10 default=6750 value=6750 flags=slider
+	   pilot_tone_frequency (int)  : min=0 max=19000 step=1 default=19000 value=19000 flags=slider
+	  pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1
+	       tune_power_level (int)  : min=0 max=120 step=1 default=88 value=88 flags=slider
+	 tune_antenna_capacitor (int)  : min=0 max=191 step=1 default=0 value=110 flags=slider
+/ #
+
+Here is a summary of them:
+
+* Pilot is an audible tone sent by the device.
+
+pilot_frequency - Configures the frequency of the stereo pilot tone.
+pilot_deviation - Configures pilot tone frequency deviation level.
+pilot_enabled - Enables or disables the pilot tone feature.
+
+* The si4713 device is capable of applying audio compression to the transmitted signal.
+
+acomp_enabled - Enables or disables the audio dynamic range control feature.
+acomp_gain - Sets the gain for audio dynamic range control.
+acomp_threshold - Sets the threshold level for audio dynamic range control.
+acomp_attack_time - Sets the attack time for audio dynamic range control.
+acomp_release_time - Sets the release time for audio dynamic range control.
+
+* Limiter setups audio deviation limiter feature. Once a over deviation occurs,
+it is possible to adjust the front-end gain of the audio input and always
+prevent over deviation.
+
+limiter_enabled - Enables or disables the limiter feature.
+limiter_deviation - Configures audio frequency deviation level.
+limiter_release_time - Sets the limiter release time.
+
+* Tuning power
+
+power_level - Sets the output power level for signal transmission.
+antenna_capacitor - This selects the value of antenna tuning capacitor manually
+or automatically if set to zero.
+
+* RDS related
+
+rds_ps_name - Sets the RDS ps name field for transmission.
+rds_radio_text - Sets the RDS radio text for transmission.
+rds_pi - Sets the RDS PI field for transmission.
+rds_pty - Sets the RDS PTY field for transmission.
+
+* Region related
+
+preemphasis - sets the preemphasis to be applied for transmission.
+
+RNL
+===
+
+This device also has an interface to measure received noise level. To do that, you should
+ioctl the device node. Here is an code of example:
+
+int main (int argc, char *argv[])
+{
+	struct si4713_rnl rnl;
+	int fd = open("/dev/radio0", O_RDWR);
+	int rval;
+
+	if (argc < 2)
+		return -EINVAL;
+
+	if (fd < 0)
+		return fd;
+
+	sscanf(argv[1], "%d", &rnl.frequency);
+
+	rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl);
+	if (rval < 0)
+		return rval;
+
+	printf("received noise level: %d\n", rnl.rnl);
+
+	close(fd);
+}
+
+The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under
+include/media/si4713.h.
+
+Stereo/Mono and RDS subchannels
+===============================
+
+The device can also be configured using the available sub channels for
+transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly.
+Refer to v4l2-spec for proper use of this ioctl.
+
+Testing
+=======
+Testing is usually done with v4l2-ctl utility for managing FM tuner cards.
+The tool can be found in v4l-dvb repository under v4l2-apps/util directory.
+
+Example for setting rds ps name:
+# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy"
+

Documentation/vm/slub.txt

@@ -41,6 +41,8 @@ Possible debug options are
 	P		Poisoning (object and padding)
 	U		User tracking (free and alloc)
 	T		Trace (please only use on single slabs)
+	O		Switch debugging off for caches that would have
+			caused higher minimum slab orders
 	-		Switch all debugging off (useful if the kernel is
 			configured with CONFIG_SLUB_DEBUG_ON)
 
@@ -59,6 +61,14 @@ to the dentry cache with
 
 	slub_debug=F,dentry
 
+Debugging options may require the minimum possible slab order to increase as
+a result of storing the metadata (for example, caches with PAGE_SIZE object
+sizes).  This has a higher liklihood of resulting in slab allocation errors
+in low memory situations or if there's high fragmentation of memory.  To
+switch off debugging for such caches by default, use
+
+	slub_debug=O
+
 In case you forgot to enable debugging on the kernel command line: It is
 possible to enable debugging manually when the kernel is up. Look at the
 contents of:

Documentation/x86/boot.txt

@@ -599,6 +599,7 @@ Protocol:	2.07+
   0x00000000	The default x86/PC environment
   0x00000001	lguest
   0x00000002	Xen
+  0x00000003	Moorestown MID
 
 Field name:	hardware_subarch_data
 Type:		write (subarch-dependent)

Documentation/x86/zero-page.txt

@@ -12,6 +12,7 @@ Offset	Proto	Name		Meaning
 000/040	ALL	screen_info	Text mode or frame buffer information
 				(struct screen_info)
 040/014	ALL	apm_bios_info	APM BIOS information (struct apm_bios_info)
+058/008	ALL	tboot_addr      Physical address of tboot shared page
 060/010	ALL	ist_info	Intel SpeedStep (IST) BIOS support information
 				(struct ist_info)
 080/010	ALL	hd0_info	hd0 disk parameter, OBSOLETE!!

MAINTAINERS

@@ -439,7 +439,7 @@ F:	drivers/hwmon/ams/
 AMSO1100 RNIC DRIVER
 M:	Tom Tucker <tom@opengridcomputing.com>
 M:	Steve Wise <swise@opengridcomputing.com>
-L:	general@lists.openfabrics.org
+L:	linux-rdma@vger.kernel.org
 S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
@@ -534,10 +534,30 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
-ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
+ARM/BCMRING ARM ARCHITECTURE
-M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Leo Chen <leochen@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
+F:	arch/arm/mach-bcmring
+
+ARM/BCMRING MTD NAND DRIVER
+M:	Leo Chen <leochen@broadcom.com>
+M:	Scott Branden <sbranden@broadcom.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/bcm_umi_nand.c
+F:	drivers/mtd/nand/bcm_umi_bch.c
+F:	drivers/mtd/nand/bcm_umi_hamming.c
+F:	drivers/mtd/nand/nand_bcm_umi.h
+
+ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
+M:	Hartley Sweeten <hsweeten@visionengravers.com>
+M:	Ryan Mallon <ryan@bluewatersys.com>
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+F:	arch/arm/mach-ep93xx/
+F:	arch/arm/mach-ep93xx/include/mach/
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -685,6 +705,18 @@ ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
+ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
+M:	Lennert Buytenhek <buytenh@marvell.com>
+M:	Nicolas Pitre <nico@marvell.com>
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T:	git git://git.marvell.com/orion
+S:	Maintained
+F:	arch/arm/mach-loki/
+F:	arch/arm/mach-kirkwood/
+F:	arch/arm/mach-mv78xx0/
+F:	arch/arm/mach-orion5x/
+F:	arch/arm/plat-orion/
+
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -876,6 +908,7 @@ M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
@@ -887,6 +920,7 @@ M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
 M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
@@ -897,6 +931,12 @@ W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
 F:	drivers/net/wireless/ath/ar9170/
 
+ATK0110 HWMON DRIVER
+M:	Luca Tettamanti <kronos.it@gmail.com>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/asus_atk0110.c
+
 ATI_REMOTE2 DRIVER
 M:	Ville Syrjala <syrjala@sci.fi>
 S:	Maintained
@@ -1494,7 +1534,7 @@ F:	drivers/net/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
 M:	Steve Wise <swise@chelsio.com>
-L:	general@lists.openfabrics.org
+L:	linux-rdma@vger.kernel.org
 W:	http://www.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/cxgb3/
@@ -1868,7 +1908,7 @@ F:	fs/efs/
 EHCA (IBM GX bus InfiniBand adapter) DRIVER
 M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
 M:	Christoph Raisch <raisch@de.ibm.com>
-L:	general@lists.openfabrics.org
+L:	linux-rdma@vger.kernel.org
 S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
@@ -1933,7 +1973,6 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-M:	Stephen Tweedie <sct@redhat.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
 M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
@@ -2118,13 +2157,16 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h
 
-FTRACE
+TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Frederic Weisbecker <fweisbec@gmail.com>
+M:	Ingo Molnar <mingo@redhat.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
 F:	arch/*/kernel/ftrace.c
-F:	include/*/ftrace.h
+F:	include/*/ftrace.h include/trace/ include/linux/trace*.h
 F:	kernel/trace/
 
 FUJITSU FR-V (FRV) PORT
@@ -2184,6 +2226,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
 F:	include/asm-generic
 
+GENERIC UIO DRIVER FOR PCI DEVICES
+M:	Michael S. Tsirkin <mst@redhat.com>
+L:	kvm@vger.kernel.org
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	drivers/uio/uio_pci_generic.c
+
 GFS2 FILE SYSTEM
 M:	Steven Whitehouse <swhiteho@redhat.com>
 L:	cluster-devel@redhat.com
@@ -2552,7 +2601,7 @@ INFINIBAND SUBSYSTEM
 M:	Roland Dreier <rolandd@cisco.com>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
-L:	general@lists.openfabrics.org (moderated for non-subscribers)
+L:	linux-rdma@vger.kernel.org
 W:	http://www.openib.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
@@ -2660,25 +2709,21 @@ F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 M:	Zhu Yi <yi.zhu@intel.com>
-M:	James Ketrenos <jketreno@linux.intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
+M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-L:	ipw2100-devel@lists.sourceforge.net
-W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
 W:	http://ipw2100.sourceforge.net
-S:	Supported
+S:	Odd Fixes
 F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
 M:	Zhu Yi <yi.zhu@intel.com>
-M:	James Ketrenos <jketreno@linux.intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
+M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-L:	ipw2100-devel@lists.sourceforge.net
-W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
 W:	http://ipw2200.sourceforge.net
-S:	Supported
+S:	Odd Fixes
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
@@ -2695,8 +2740,8 @@ F:	include/linux/wimax/i2400m.h
 INTEL WIRELESS WIFI LINK (iwlwifi)
 M:	Zhu Yi <yi.zhu@intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
+M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-L:	ipw3945-devel@lists.sourceforge.net
 W:	http://intellinuxwireless.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
 S:	Supported
@@ -2729,7 +2774,7 @@ F:	drivers/net/ipg.c
 
 IPATH DRIVER
 M:	Ralph Campbell <infinipath@qlogic.com>
-L:	general@lists.openfabrics.org
+L:	linux-rdma@vger.kernel.org
 T:	git git://git.qlogic.com/ipath-linux-2.6
 S:	Supported
 F:	drivers/infiniband/hw/ipath/
@@ -2855,8 +2900,8 @@ F:	fs/jffs2/
 F:	include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-M:	Stephen Tweedie <sct@redhat.com>
 M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Jan Kara <jack@suse.cz>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd*/
@@ -2928,6 +2973,7 @@ F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
 M:	Avi Kivity <avi@redhat.com>
+M:	Marcelo Tosatti <mtosatti@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3279,8 +3325,14 @@ S:	Supported
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
+MARVELL MWL8K WIRELESS DRIVER
+M:	Lennert Buytenhek <buytenh@marvell.com>
+L:	linux-wireless@vger.kernel.org
+S:	Supported
+F:	drivers/net/wireless/mwl8k.c
+
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-M:	Nicolas Pitre <nico@cam.org>
+M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
@@ -3485,7 +3537,7 @@ F:	drivers/scsi/NCR_D700.*
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 M:	Faisal Latif <faisal.latif@intel.com>
 M:	Chien Tung <chien.tin.tung@intel.com>
-L:	general@lists.openfabrics.org
+L:	linux-rdma@vger.kernel.org
 W:	http://www.neteffect.com
 S:	Supported
 F:	drivers/infiniband/hw/nes/
@@ -3591,9 +3643,12 @@ M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
+F:	net/mac80211/
+F:	net/rfkill/
 F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/linux/wireless.h
+F:	drivers/net/wireless/
 
 NETWORKING DRIVERS
 L:	netdev@vger.kernel.org
@@ -3969,6 +4024,14 @@ S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
 
+PMC SIERRA MaxRAID DRIVER
+P:	Anil Ravindranath
+M:	anil_ravindranath@pmc-sierra.com
+L:	linux-scsi@vger.kernel.org
+W:	http://www.pmc-sierra.com/
+S:	Supported
+F:	drivers/scsi/pmcraid.*
+
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Supported
@@ -4299,7 +4362,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtl818*
+F:	drivers/net/wireless/rtl818x/rtl8180*
 
 RTL8187 WIRELESS DRIVER
 M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
@@ -4391,6 +4454,14 @@ S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
 
+SCORE ARCHITECTURE
+P:	Chen Liqin
+M:	liqin.chen@sunplusct.com
+P:	Lennox Wu
+M:	lennox.wu@sunplusct.com
+W:	http://www.sunplusct.com
+S:	Supported
+
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
@@ -4407,7 +4478,7 @@ F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
 
 SCSI SUBSYSTEM
-M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
+M:	"James E.J. Bottomley" <James.Bottomley@suse.de>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
@@ -4526,9 +4597,10 @@ S:	Supported
 F:	drivers/net/benet/
 
 SFC NETWORK DRIVER
-P:	Steve Hodgson
+M:	Solarflare linux maintainers <linux-net-drivers@solarflare.com>
-P:	Ben Hutchings
+M:	Steve Hodgson <shodgson@solarflare.com>
-M:	Robert Stonehouse <linux-net-drivers@solarflare.com>
+M:	Ben Hutchings <bhutchings@solarflare.com>
+L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/sfc/
 
@@ -4589,6 +4661,12 @@ F:	arch/arm/mach-s3c2410/
 F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
+TI DAVINCI MACHINE SUPPORT
+P:	Kevin Hilman
+M:	davinci-linux-open-source@linux.davincidsp.com
+S:	Supported
+F:	arch/arm/mach-davinci
+
 SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -4640,7 +4718,7 @@ F:	include/linux/sl?b*.h
 F:	mm/sl?b.c
 
 SMC91x ETHERNET DRIVER
-M:	Nicolas Pitre <nico@cam.org>
+M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Maintained
 F:	drivers/net/smc91x.*
 
@@ -5578,6 +5656,24 @@ M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
+WL1251 WIRELESS DRIVER
+P:	Kalle Valo
+M:	kalle.valo@nokia.com
+L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S:	Maintained
+F:	drivers/net/wireless/wl12xx/*
+X:	drivers/net/wireless/wl12xx/wl1271*
+
+WL1271 WIRELESS DRIVER
+M:	Luciano Coelho <luciano.coelho@nokia.com>
+L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S:	Maintained
+F:	drivers/net/wireless/wl12xx/wl1271*
+
 WL3501 WIRELESS PCMCIA CARD DRIVER
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	linux-wireless@vger.kernel.org
@@ -5595,6 +5691,26 @@ S:	Supported
 F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
+WOLFSON MICROELECTRONICS PMIC DRIVERS
+P:	Mark Brown
+M:	broonie@opensource.wolfsonmicro.com
+L:	linux-kernel@vger.kernel.org
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
+W:	http://opensource.wolfsonmicro.com/node/8
+S:	Supported
+F:	drivers/leds/leds-wm83*.c
+F:	drivers/mfd/wm8*.c
+F:	drivers/power/wm83*.c
+F:	drivers/rtc/rtc-wm83*.c
+F:	drivers/regulator/wm8*.c
+F:	drivers/video/backlight/wm83*_bl.c
+F:	drivers/watchdog/wm83*_wdt.c
+F:	include/linux/mfd/wm831x/
+F:	include/linux/mfd/wm8350/
+F:	include/linux/mfd/wm8400/
+F:	sound/soc/codecs/wm8350.c
+F:	sound/soc/codecs/wm8400.c
+
 X.25 NETWORK LAYER
 M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org
@@ -5627,7 +5743,7 @@ F:	include/xen/
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Felix Blyakher <felixb@sgi.com>
+M:	Alex Elder <aelder@sgi.com>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -325,7 +325,7 @@ CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 MODFLAGS	= -DMODULE
 CFLAGS_MODULE   = $(MODFLAGS)
 AFLAGS_MODULE   = $(MODFLAGS)
-LDFLAGS_MODULE  =
+LDFLAGS_MODULE  = -T $(srctree)/scripts/module-common.lds
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage

arch/Kconfig

@@ -9,6 +9,7 @@ config OPROFILE
 	depends on TRACING_SUPPORT
 	select TRACING
 	select RING_BUFFER
+	select RING_BUFFER_ALLOW_SWAP
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,
@@ -30,6 +31,18 @@ config OPROFILE_IBS
 
 	  If unsure, say N.
 
+config OPROFILE_EVENT_MULTIPLEX
+	bool "OProfile multiplexing support (EXPERIMENTAL)"
+	default n
+	depends on OPROFILE && X86
+	help
+	  The number of hardware counters is limited. The multiplexing
+	  feature enables OProfile to gather more events than counters
+	  are provided by the hardware. This is realized by switching
+	  between events at an user specified time interval.
+
+	  If unsure, say N.
+
 config HAVE_OPROFILE
 	bool
 

arch/alpha/include/asm/agp.h

@@ -9,10 +9,6 @@
 #define unmap_page_from_agp(page) 
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))

arch/alpha/include/asm/pci.h

@@ -52,7 +52,6 @@ struct pci_controller {
    bus numbers.  */
 
 #define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		alpha_mv.min_io_address
 #define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address

arch/alpha/include/asm/percpu.h

@@ -1,102 +1,18 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
 
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <linux/percpu-defs.h>
-
 /*
- * Determine the real variable name from the name visible in the
+ * To calculate addresses of locally defined variables, GCC uses
- * kernel sources.
+ * 32-bit displacement from the GP. Which doesn't work for per cpu
- */
+ * variables in modules, as an offset to the kernel per cpu area is
-#define per_cpu_var(var) per_cpu__##var
+ * way above 4G.
-
-#ifdef CONFIG_SMP
-
-/*
- * per_cpu_offset() is the offset that has to be added to a
- * percpu variable to get to the instance for a certain processor.
- */
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
-#ifdef CONFIG_DEBUG_PREEMPT
-#define my_cpu_offset per_cpu_offset(smp_processor_id())
-#else
-#define my_cpu_offset __my_cpu_offset
-#endif
-
-#ifndef MODULE
-#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_DEF_ATTRIBUTES
-#else
-/*
- * To calculate addresses of locally defined variables, GCC uses 32-bit
- * displacement from the GP. Which doesn't work for per cpu variables in
- * modules, as an offset to the kernel per cpu area is way above 4G.
  *
- * This forces allocation of a GOT entry for per cpu variable using
+ * Always use weak definitions for percpu variables in modules.
- * ldq instruction with a 'literal' relocation.
  */
-#define SHIFT_PERCPU_PTR(var, offset) ({		\
+#if defined(MODULE) && defined(CONFIG_SMP)
-	extern int simple_identifier_##var(void);	\
+#define ARCH_NEEDS_WEAK_PER_CPU
-	unsigned long __ptr, tmp_gp;			\
-	asm (  "br	%1, 1f		  	      \n\
-	1:	ldgp	%1, 0(%1)	    	      \n\
-		ldq %0, per_cpu__" #var"(%1)\t!literal"		\
-		: "=&r"(__ptr), "=&r"(tmp_gp));		\
-	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-
-#define PER_CPU_DEF_ATTRIBUTES	__used
-
-#endif /* MODULE */
-
-/*
- * A percpu variable may point to a discarded regions. The following are
- * established ways to produce a usable pointer from the percpu variable
- * offset.
- */
-#define per_cpu(var, cpu) \
-	(*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
-#define __get_cpu_var(var) \
-	(*SHIFT_PERCPU_PTR(var, my_cpu_offset))
-#define __raw_get_cpu_var(var) \
-	(*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
-
-#else /* ! SMP */
-
-#define per_cpu(var, cpu)		(*((void)(cpu), &per_cpu_var(var)))
-#define __get_cpu_var(var)		per_cpu_var(var)
-#define __raw_get_cpu_var(var)		per_cpu_var(var)
-
-#define PER_CPU_DEF_ATTRIBUTES
-
-#endif /* SMP */
-
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
 #endif
 
-#ifdef CONFIG_SMP
+#include <asm-generic/percpu.h>
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
-#endif
-
-#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */

arch/alpha/include/asm/socket.h

@@ -32,6 +32,8 @@
 #define	SO_RCVTIMEO	0x1012
 #define	SO_SNDTIMEO	0x1013
 #define SO_ACCEPTCONN	0x1014
+#define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11

arch/alpha/include/asm/thread_info.h

@@ -75,6 +75,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_UAC_SIGBUS		7
 #define TIF_MEMDIE		8
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
+#define TIF_NOTIFY_RESUME	10	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -82,10 +83,12 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 /* Work to do on interrupt/exception return.  */
-#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\

arch/alpha/include/asm/tlbflush.h

@@ -2,6 +2,7 @@
 #define _ALPHA_TLBFLUSH_H
 
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <asm/compiler.h>
 #include <asm/pgalloc.h>
 

arch/alpha/kernel/signal.c

@@ -20,6 +20,7 @@
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
 #include <linux/syscalls.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/sigcontext.h>
@@ -683,4 +684,11 @@ do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
 {
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, sw, r0, r19);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
+	}
 }

arch/alpha/kernel/vmlinux.lds.S

@@ -134,13 +134,6 @@ SECTIONS
 	__bss_stop = .;
 	_end = .;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-	}
-
 	.mdebug 0 : {
 		*(.mdebug)
 	}
@@ -150,4 +143,6 @@ SECTIONS
 
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	DISCARDS
 }

arch/arm/Kconfig

@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
-config MMU
-	bool
-	default y
-
 config NO_IOPORT
 	bool
 
@@ -126,6 +122,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -188,6 +191,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
@@ -203,6 +213,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -217,6 +228,7 @@ config ARCH_REALVIEW
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -229,6 +241,7 @@ config ARCH_VERSATILE
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd Versatile board.
 
@@ -327,6 +340,20 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -493,10 +520,18 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
-		can login www.mcuos.com or www.nuvoton.com to know more.
+	  At present, the w90x900 has been renamed nuc900, regarding
+	  the ARM series product line, you can login the following
+	  link address to know more.
+
+	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -509,6 +544,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +587,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -563,6 +600,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -573,9 +611,18 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select CPU_V7
+	help
+	  Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -632,11 +679,24 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -685,6 +745,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -702,6 +763,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
@@ -716,6 +781,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
@@ -730,6 +797,8 @@ source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-bcmring/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -962,18 +1031,7 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-config PREEMPT
+source kernel/Kconfig.preempt
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
 
 config HZ
 	int
@@ -983,6 +1041,21 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && EXPERIMENTAL
+	select AEABI
+	select ARM_ASM_UNIFIED
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode. A compiler/assembler that understand the unified
+	  ARM-Thumb syntax is needed.
+
+	  If unsure, say N.
+
+config ARM_ASM_UNIFIED
+	bool
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
@@ -1054,6 +1127,11 @@ config HIGHMEM
 
 	  If unsure, say n.
 
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem"
+	depends on HIGHMEM
+	depends on !OUTER_CACHE
+
 source "mm/Kconfig"
 
 config LEDS
@@ -1241,7 +1319,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1276,6 +1354,52 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
@@ -1377,107 +1501,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
+source "drivers/Kconfig"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
 
 source "fs/Kconfig"
 

arch/arm/Kconfig.debug

@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
+	depends on !THUMB2_KERNEL
 	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and

arch/arm/Makefile

@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
@@ -112,6 +119,7 @@ endif
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
@@ -135,8 +143,10 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
@@ -150,6 +160,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -158,6 +169,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
@@ -168,6 +180,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/boot/Makefile

@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(LOADADDR) -e $(LOADADDR) \
+		   -C none -a $(LOADADDR) -e $(STARTADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'

arch/arm/boot/compressed/head-sa1100.S

@@ -1,7 +1,7 @@
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
- * Copyright (C) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  * 
  * SA1100 specific tweaks.  This is merged into head.S by the linker.
  *

arch/arm/boot/compressed/head.S

@@ -140,7 +140,8 @@ start:
 		tst	r2, #3			@ not user?
 		bne	not_angel
 		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
-		swi	0x123456		@ angel_SWI_ARM
+ ARM(		swi	0x123456	)	@ angel_SWI_ARM
+ THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
 		mrs	r2, cpsr		@ turn off interrupts to
 		orr	r2, r2, #0xc0		@ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
+1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
-		stmia	r1!, {r9 - r14}
+		stmia	r1!, {r9 - r12, r14}
-		ldmia	r2!, {r9 - r14}
+		ldmia	r2!, {r9 - r12, r14}
-		stmia	r1!, {r9 - r14}
+		stmia	r1!, {r9 - r12, r14}
 		cmp	r2, r3
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 
 		bl	cache_clean_flush
-		add	pc, r5, r0		@ call relocation code
+ ARM(		add	pc, r5, r0		) @ call relocation code
+ THUMB(		add	r12, r5, r0		)
+ THUMB(		mov	pc, r12			) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -291,6 +297,7 @@ wont_overwrite:	mov	r0, r4
 		bl	decompress_kernel
 		b	call_kernel
 
+		.align	2
 		.type	LC0, #object
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
@@ -431,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -444,10 +452,12 @@ __armv4_mmu_cache_on:
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
 		blne	__setup_mmu
@@ -455,9 +465,11 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
 		tst	r11, #0xf		@ VMSA
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
@@ -465,6 +477,7 @@ __armv7_mmu_cache_on:
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+#endif
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
@@ -498,6 +511,7 @@ __arm6_mmu_cache_on:
 		mov	pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -509,6 +523,7 @@ __common_mmu_cache_on:
 1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -522,7 +537,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		.align	5
 reloc_start:	add	r9, r5, r0
@@ -531,13 +546,14 @@ reloc_start:	add	r9, r5, r0
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
+		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r14}
+		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
 		.endr
 
 		cmp	r5, r9
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
@@ -571,7 +587,9 @@ call_cache_fn:	adr	r12, proc_types
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
 		tst	r1, r2			@       & mask
-		addeq	pc, r12, r3		@ call cache function
+ ARM(		addeq	pc, r12, r3		) @ call cache function
+ THUMB(		addeq	r12, r3			)
+ THUMB(		moveq	pc, r12			) @ call cache function
 		add	r12, r12, #4*5
 		b	1b
 
@@ -589,13 +607,15 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+		.align	2
 		.type	proc_types,#object
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_mmu_cache_off	@ works, but slow
+		W(b)	__arm6_mmu_cache_off	@ works, but slow
-		b	__arm6_mmu_cache_off
+		W(b)	__arm6_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 @		b	__arm6_mmu_cache_on		@ untested
 @		b	__arm6_mmu_cache_off
 @		b	__armv3_mmu_cache_flush
@@ -603,76 +623,84 @@ proc_types:
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007400		@ ARM74x
 		.word	0xff00ff00
-		b	__armv3_mpu_cache_on
+		W(b)	__armv3_mpu_cache_on
-		b	__armv3_mpu_cache_off
+		W(b)	__armv3_mpu_cache_off
-		b	__armv3_mpu_cache_flush
+		W(b)	__armv3_mpu_cache_flush
 		
 		.word	0x41009400		@ ARM94x
 		.word	0xff00ff00
-		b	__armv4_mpu_cache_on
+		W(b)	__armv4_mpu_cache_on
-		b	__armv4_mpu_cache_off
+		W(b)	__armv4_mpu_cache_off
-		b	__armv4_mpu_cache_flush
+		W(b)	__armv4_mpu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		@ Everything from here on will be the new ID system.
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56158000		@ PXA168
 		.word	0xfffff000
-		b __armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b __armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b __armv5tej_mmu_cache_flush
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 		/* this conflicts with the standard ARMv5TE entry */
@@ -685,47 +713,50 @@ proc_types:
 
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
-		b	__fa526_cache_on
+		W(b)	__fa526_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__fa526_cache_flush
+		W(b)	__fa526_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		b	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv6_mmu_cache_flush
+		W(b)	__armv6_mmu_cache_flush
 
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
-		b	__armv7_mmu_cache_on
+		W(b)	__armv7_mmu_cache_on
-		b	__armv7_mmu_cache_off
+		W(b)	__armv7_mmu_cache_off
-		b	__armv7_mmu_cache_flush
+		W(b)	__armv7_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.size	proc_types, . - proc_types
 
@@ -760,22 +791,30 @@ __armv3_mpu_cache_off:
 		mov	pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+#endif
 		mov	pc, lr
 
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
 		bic	r0, r0, #0x000d
+#else
+		bic	r0, r0, #0x000c
+#endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
+#ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+#endif
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
@@ -852,7 +891,7 @@ __armv7_mmu_cache_flush:
 		b	iflush
 hierarchical:
 		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r5, r7, r9, r11}
+		stmfd	sp!, {r0-r7, r9-r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -877,8 +916,12 @@ loop1:
 loop2:
 		mov	r9, r4			@ create working copy of max way size
 loop3:
-		orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
+ ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
-		orr	r11, r11, r7, lsl r2	@ factor index number into r11
+ ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
+ THUMB(		lsl	r6, r9, r5		)
+ THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
+ THUMB(		lsl	r6, r7, r2		)
+ THUMB(		orr	r11, r11, r6		) @ factor index number into r11
 		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
 		subs	r9, r9, #1		@ decrement the way
 		bge	loop3
@@ -889,7 +932,7 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
-		ldmfd	sp!, {r0-r5, r7, r9, r11}
+		ldmfd	sp!, {r0-r7, r9-r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
 iflush:
@@ -923,9 +966,13 @@ __armv4_mmu_cache_flush:
 		mov	r11, #8
 		mov	r11, r11, lsl r3	@ cache line size in bytes
 no_cache_id:
-		bic	r1, pc, #63		@ align to longest cache line
+		mov	r1, pc
+		bic	r1, r1, #63		@ align to longest cache line
 		add	r2, r1, r2
-1:		ldr	r3, [r1], r11		@ s/w flush D cache
+1:
+ ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
+ THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
+ THUMB(		add     r1, r1, r11		)
 		teq	r1, r2
 		bne	1b
 
@@ -945,6 +992,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+		.align	2
 		.type	phexbuf,#object
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf

arch/arm/common/vic.c

@@ -22,10 +22,20 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
 	void __iomem *base = get_irq_chip_data(irq);
@@ -253,12 +263,16 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
-	.ack	= vic_mask_irq,
+	.ack	= vic_ack_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
 	.set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+			 u32 vic_sources);
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +284,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
+	u32 cellid = 0;
+	enum amba_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case AMBA_VENDOR_ST:
+		vik_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case AMBA_VENDOR_ARM:
+		break;
+	}
 
 	/* Disable all interrupts initially. */
 
@@ -306,3 +342,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+				u32 vic_sources)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		writel(0, base + VIC_PL190_VECT_ADDR);
+		for (i = 0; i < 19; i++) {
+			unsigned int value;
+
+			value = readl(base + VIC_PL190_VECT_ADDR);
+			writel(value, base + VIC_PL190_VECT_ADDR);
+		}
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}

arch/arm/configs/bcmring_defconfig

@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/davinci_all_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
+# Linux kernel version: 2.6.31-rc3-davinci1
-# Tue May 26 07:24:28 2009
+# Fri Jul 17 08:26:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -62,8 +60,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +89,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -106,6 +107,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +124,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,13 +151,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,26 +167,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_AINTC=y
+CONFIG_ARCH_DAVINCI_DMx=y
 
 #
 # TI DaVinci Implementations
@@ -191,6 +199,9 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+# CONFIG_ARCH_DAVINCI_DA850 is not set
+CONFIG_ARCH_DAVINCI_DM365=y
 
 #
 # DaVinci Board Type
@@ -200,6 +211,7 @@ CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
+CONFIG_MACH_DAVINCI_DM365_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -227,7 +239,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -252,7 +263,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -268,12 +278,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -415,6 +426,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -553,6 +565,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -564,6 +577,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
@@ -609,10 +623,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -637,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -684,6 +693,7 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -748,18 +758,21 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -773,6 +786,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -832,6 +846,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -854,7 +869,6 @@ CONFIG_I2C_DAVINCI=y
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -935,6 +949,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -986,52 +1001,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
+# CONFIG_AB3100_CORE is not set
-#
+# CONFIG_MEDIA_SUPPORT is not set
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -1102,6 +1073,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1112,9 +1088,16 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_EVM=m
+CONFIG_SND_DM6467_SOC_EVM=m
+# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1143,7 +1126,7 @@ CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
@@ -1160,10 +1143,11 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1266,6 +1250,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
@@ -1285,17 +1270,20 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
@@ -1311,7 +1299,7 @@ CONFIG_USB_CDC_COMPOSITE=m
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1328,7 +1316,6 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1340,7 +1327,7 @@ CONFIG_LEDS_CLASS=m
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1386,6 +1373,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1433,14 +1421,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1623,6 +1613,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1654,18 +1645,16 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
+CONFIG_FTRACE=y
-#
-# Tracers
-#
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set

arch/arm/configs/jornada720_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
+# Linux kernel version: 2.6.31-rc6
-# Tue Sep 16 18:56:58 2008
+# Fri Aug 21 15:41:39 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -44,10 +41,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -56,9 +62,11 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -87,30 +100,25 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,7 +134,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -136,14 +144,15 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -188,14 +199,6 @@ CONFIG_SA1100_JORNADA720_SSP=y
 # CONFIG_SA1100_SIMPAD is not set
 CONFIG_SA1100_SSP=y
 
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
 #
 # Processor Type
 #
@@ -215,8 +218,8 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
@@ -246,30 +249,36 @@ CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_NODES_SHIFT=2
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_DISCONTIGMEM=y
+CONFIG_SPARSEMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_SPARSEMEM_EXTREME=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -281,9 +290,10 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -294,12 +304,14 @@ CONFIG_CMDLINE=""
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -431,14 +448,17 @@ CONFIG_IRCOMM=m
 CONFIG_SA1100_FIR=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_EXT is not set
+# CONFIG_WIMAX is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -464,29 +484,34 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDE_GD=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -513,8 +538,34 @@ CONFIG_DUMMY=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
+# CONFIG_PHYLIB is not set
-CONFIG_MII=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -523,17 +574,27 @@ CONFIG_MII=m
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
+# CONFIG_PCMCIA_3C589 is not set
-CONFIG_PCMCIA_3C574=m
+# CONFIG_PCMCIA_3C574 is not set
-CONFIG_PCMCIA_FMVJ18X=m
+# CONFIG_PCMCIA_FMVJ18X is not set
-CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_PCNET is not set
-CONFIG_PCMCIA_NMCLAN=m
+# CONFIG_PCMCIA_NMCLAN is not set
-CONFIG_PCMCIA_SMC91C92=m
+# CONFIG_PCMCIA_SMC91C92 is not set
-CONFIG_PCMCIA_XIRC2PS=m
+# CONFIG_PCMCIA_XIRC2PS is not set
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -565,20 +626,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
+# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@ CONFIG_TOUCHSCREEN_HP7XX=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -624,11 +688,12 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -649,6 +714,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -663,12 +732,14 @@ CONFIG_GPIOLIB=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -676,6 +747,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP_SA11X0 is not set
-
+# CONFIG_MEDIA_SUPPORT is not set
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -712,6 +769,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
 
 #
 # Display device support
@@ -757,6 +825,8 @@ CONFIG_FONT_8x16=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -794,15 +867,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_DMADEVICES is not set
-
+# CONFIG_AUXDISPLAY is not set
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -811,12 +879,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -825,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -846,14 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
+CONFIG_MISC_FILESYSTEMS=y
-#
-# Miscellaneous filesystems
-#
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@ CONFIG_SYSFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -935,12 +1012,16 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y