[SCSI] scsi_debug: error processing
After discussions in the thread titled:
[PATCH] scsi_debug: illegal blocking memory allocation
here is a patch containing the discussed fix and some other
fixes and additions. The patch is against lk 2.6.20-rc3 .
The version is bumped to 1.81 .
ChangeLog:
- Change several GFP_KERNEL allocations to GFP_ATOMIC
as they can be called from queuecommand() context
- check above allocation returns and if out of memory
report DID_REQUEUE in two cases, DID_NO_CONNECT in
another, and fail slave configure() in another
- add support for WRITE BUFFER command
- add aborted_command error injection support
(opts mask 0x10), similar mechanism to
recovered_error injection.
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Douglas Gilbert
James Bottomley
parent
d780c3bf21
commit
6f3cbf552e
1 changed files with 33 additions and 9 deletions
|
|
@ -51,10 +51,10 @@
|
|||
#include "scsi_logging.h"
|
||||
#include "scsi_debug.h"
|
||||
|
||||
#define SCSI_DEBUG_VERSION "1.80"
|
||||
static const char * scsi_debug_version_date = "20061018";
|
||||
#define SCSI_DEBUG_VERSION "1.81"
|
||||
static const char * scsi_debug_version_date = "20070104";
|
||||
|
||||
/* Additional Sense Code (ASC) used */
|
||||
/* Additional Sense Code (ASC) */
|
||||
#define NO_ADDITIONAL_SENSE 0x0
|
||||
#define LOGICAL_UNIT_NOT_READY 0x4
|
||||
#define UNRECOVERED_READ_ERR 0x11
|
||||
|
|
@ -65,9 +65,13 @@ static const char * scsi_debug_version_date = "20061018";
|
|||
#define INVALID_FIELD_IN_PARAM_LIST 0x26
|
||||
#define POWERON_RESET 0x29
|
||||
#define SAVING_PARAMS_UNSUP 0x39
|
||||
#define TRANSPORT_PROBLEM 0x4b
|
||||
#define THRESHOLD_EXCEEDED 0x5d
|
||||
#define LOW_POWER_COND_ON 0x5e
|
||||
|
||||
/* Additional Sense Code Qualifier (ASCQ) */
|
||||
#define ACK_NAK_TO 0x3
|
||||
|
||||
#define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
|
||||
|
||||
/* Default values for driver parameters */
|
||||
|
|
@ -95,15 +99,20 @@ static const char * scsi_debug_version_date = "20061018";
|
|||
#define SCSI_DEBUG_OPT_MEDIUM_ERR 2
|
||||
#define SCSI_DEBUG_OPT_TIMEOUT 4
|
||||
#define SCSI_DEBUG_OPT_RECOVERED_ERR 8
|
||||
#define SCSI_DEBUG_OPT_TRANSPORT_ERR 16
|
||||
/* When "every_nth" > 0 then modulo "every_nth" commands:
|
||||
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
|
||||
* - a RECOVERED_ERROR is simulated on successful read and write
|
||||
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
|
||||
* - a TRANSPORT_ERROR is simulated on successful read and write
|
||||
* commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
|
||||
*
|
||||
* When "every_nth" < 0 then after "- every_nth" commands:
|
||||
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
|
||||
* - a RECOVERED_ERROR is simulated on successful read and write
|
||||
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
|
||||
* - a TRANSPORT_ERROR is simulated on successful read and write
|
||||
* commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
|
||||
* This will continue until some other action occurs (e.g. the user
|
||||
* writing a new value (other than -1 or 1) to every_nth via sysfs).
|
||||
*/
|
||||
|
|
@ -315,6 +324,7 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
|
|||
int target = SCpnt->device->id;
|
||||
struct sdebug_dev_info * devip = NULL;
|
||||
int inj_recovered = 0;
|
||||
int inj_transport = 0;
|
||||
int delay_override = 0;
|
||||
|
||||
if (done == NULL)
|
||||
|
|
@ -352,6 +362,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
|
|||
return 0; /* ignore command causing timeout */
|
||||
else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts)
|
||||
inj_recovered = 1; /* to reads and writes below */
|
||||
else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts)
|
||||
inj_transport = 1; /* to reads and writes below */
|
||||
}
|
||||
|
||||
if (devip->wlun) {
|
||||
|
|
@ -468,7 +480,11 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
|
|||
mk_sense_buffer(devip, RECOVERED_ERROR,
|
||||
THRESHOLD_EXCEEDED, 0);
|
||||
errsts = check_condition_result;
|
||||
}
|
||||
} else if (inj_transport && (0 == errsts)) {
|
||||
mk_sense_buffer(devip, ABORTED_COMMAND,
|
||||
TRANSPORT_PROBLEM, ACK_NAK_TO);
|
||||
errsts = check_condition_result;
|
||||
}
|
||||
break;
|
||||
case REPORT_LUNS: /* mandatory, ignore unit attention */
|
||||
delay_override = 1;
|
||||
|
|
@ -531,6 +547,9 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
|
|||
delay_override = 1;
|
||||
errsts = check_readiness(SCpnt, 0, devip);
|
||||
break;
|
||||
case WRITE_BUFFER:
|
||||
errsts = check_readiness(SCpnt, 1, devip);
|
||||
break;
|
||||
default:
|
||||
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
|
||||
printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
|
||||
|
|
@ -954,7 +973,9 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target,
|
|||
int alloc_len, n, ret;
|
||||
|
||||
alloc_len = (cmd[3] << 8) + cmd[4];
|
||||
arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_KERNEL);
|
||||
arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
|
||||
if (! arr)
|
||||
return DID_REQUEUE << 16;
|
||||
if (devip->wlun)
|
||||
pq_pdt = 0x1e; /* present, wlun */
|
||||
else if (scsi_debug_no_lun_0 && (0 == devip->lun))
|
||||
|
|
@ -1217,7 +1238,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp,
|
|||
alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
|
||||
+ cmd[9]);
|
||||
|
||||
arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_KERNEL);
|
||||
arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
|
||||
if (! arr)
|
||||
return DID_REQUEUE << 16;
|
||||
/*
|
||||
* EVPD page 0x88 states we have two ports, one
|
||||
* real and a fake port with no device connected.
|
||||
|
|
@ -1996,6 +2019,8 @@ static int scsi_debug_slave_configure(struct scsi_device * sdp)
|
|||
if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
|
||||
sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
|
||||
devip = devInfoReg(sdp);
|
||||
if (NULL == devip)
|
||||
return 1; /* no resources, will be marked offline */
|
||||
sdp->hostdata = devip;
|
||||
if (sdp->host->cmd_per_lun)
|
||||
scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING,
|
||||
|
|
@ -2044,7 +2069,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
|
|||
}
|
||||
}
|
||||
if (NULL == open_devip) { /* try and make a new one */
|
||||
open_devip = kzalloc(sizeof(*open_devip),GFP_KERNEL);
|
||||
open_devip = kzalloc(sizeof(*open_devip),GFP_ATOMIC);
|
||||
if (NULL == open_devip) {
|
||||
printk(KERN_ERR "%s: out of memory at line %d\n",
|
||||
__FUNCTION__, __LINE__);
|
||||
|
|
@ -2388,7 +2413,7 @@ MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
|
|||
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
|
||||
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
|
||||
MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
|
||||
MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->... (def=0)");
|
||||
MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
|
||||
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
|
||||
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
|
||||
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
|
||||
|
|
@ -2943,7 +2968,6 @@ static int sdebug_add_adapter(void)
|
|||
struct list_head *lh, *lh_sf;
|
||||
|
||||
sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
|
||||
|
||||
if (NULL == sdbg_host) {
|
||||
printk(KERN_ERR "%s: out of memory at line %d\n",
|
||||
__FUNCTION__, __LINE__);
|
||||
|
|
|
|||
Loading…
Reference in a new issue