From 6cb0e0f6a46a6c2f1d6f9d4a0539f2ed7d8487fb Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 12 Jan 2016 12:46:16 +0000 Subject: [PATCH] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver Signed-off-by: Ludovic Barre Signed-off-by: Lee Jones Acked-by: Rob Herring Signed-off-by: Bjorn Andersson --- .../bindings/remoteproc/st-rproc.txt | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt new file mode 100644 index 000000000000..1031bcd90a79 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt @@ -0,0 +1,41 @@ +STMicroelectronics Co-Processor Bindings +---------------------------------------- + +This binding provides support for adjunct processors found on ST SoCs. + +Co-processors can be controlled from the bootloader or the primary OS. If +the bootloader starts a co-processor, the primary OS must detect its state +and act accordingly. + +Required properties: +- compatible Should be one of: + "st,st231-rproc" + "st,st40-rproc" +- memory-region Reserved memory (See: ../reserved-memory/reserved-memory.txt) +- resets Reset lines (See: ../reset/reset.txt) +- reset-names Must be "sw_reset" and "pwr_reset" +- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) +- clock-frequency Clock frequency to set co-processor at if the bootloader + hasn't already done so +- st,syscfg System configuration register which holds the boot vector + for the co-processor + 1st cell: Phandle to syscon block + 2nd cell: Boot vector register offset + +Example: + + audio_reserved: rproc@42000000 { + compatible = "shared-dma-pool"; + reg = <0x42000000 0x01000000>; + no-map; + }; + + st231-audio { + compatible = "st,st231-rproc"; + memory-region = <&audio_reserved>; + resets = <&softreset STIH407_ST231_AUD_SOFTRESET>; + reset-names = "sw_reset"; + clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>; + clock-frequency = <600000000>; + st,syscfg = <&syscfg_core 0x228>; + };