mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Alessandro Rubini
David Woodhouse
parent
6469f540ea
commit
63234717d1
7 changed files with 395 additions and 1 deletions
|
|
@ -498,7 +498,7 @@ CONFIG_MTD_CFI_I2=y
|
|||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_VERIFY_WRITE=y
|
||||
# CONFIG_MTD_NAND_ECC_SMC is not set
|
||||
CONFIG_MTD_NAND_ECC_SMC=y
|
||||
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
||||
# CONFIG_MTD_NAND_GPIO is not set
|
||||
CONFIG_MTD_NAND_IDS=y
|
||||
|
|
|
|||
|
|
@ -16,12 +16,103 @@
|
|||
#include <linux/amba/bus.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/io.h>
|
||||
#include <asm/sizes.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <mach/setup.h>
|
||||
#include <mach/nand.h>
|
||||
#include <mach/fsmc.h>
|
||||
#include "clock.h"
|
||||
|
||||
/* These adresses span 16MB, so use three individual pages */
|
||||
static struct resource nhk8815_nand_resources[] = {
|
||||
{
|
||||
.name = "nand_addr",
|
||||
.start = NAND_IO_ADDR,
|
||||
.end = NAND_IO_ADDR + 0xfff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "nand_cmd",
|
||||
.start = NAND_IO_CMD,
|
||||
.end = NAND_IO_CMD + 0xfff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "nand_data",
|
||||
.start = NAND_IO_DATA,
|
||||
.end = NAND_IO_DATA + 0xfff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}
|
||||
};
|
||||
|
||||
static int nhk8815_nand_init(void)
|
||||
{
|
||||
/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
|
||||
writel(0x0000000E, FSMC_PCR(0));
|
||||
writel(0x000D0A00, FSMC_PMEM(0));
|
||||
writel(0x00100A00, FSMC_PATT(0));
|
||||
|
||||
/* enable access to the chip select area */
|
||||
writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* These partitions are the same as those used in the 2.6.20 release
|
||||
* shipped by the vendor; the first two partitions are mandated
|
||||
* by the boot ROM, and the bootloader area is somehow oversized...
|
||||
*/
|
||||
static struct mtd_partition nhk8815_partitions[] = {
|
||||
{
|
||||
.name = "X-Loader(NAND)",
|
||||
.offset = 0,
|
||||
.size = SZ_256K,
|
||||
}, {
|
||||
.name = "MemInit(NAND)",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = SZ_256K,
|
||||
}, {
|
||||
.name = "BootLoader(NAND)",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = SZ_2M,
|
||||
}, {
|
||||
.name = "Kernel zImage(NAND)",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = 3 * SZ_1M,
|
||||
}, {
|
||||
.name = "Root Filesystem(NAND)",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = 22 * SZ_1M,
|
||||
}, {
|
||||
.name = "User Filesystem(NAND)",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
}
|
||||
};
|
||||
|
||||
static struct nomadik_nand_platform_data nhk8815_nand_data = {
|
||||
.parts = nhk8815_partitions,
|
||||
.nparts = ARRAY_SIZE(nhk8815_partitions),
|
||||
.options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
|
||||
| NAND_NO_READRDY | NAND_NO_AUTOINCR,
|
||||
.init = nhk8815_nand_init,
|
||||
};
|
||||
|
||||
static struct platform_device nhk8815_nand_device = {
|
||||
.name = "nomadik_nand",
|
||||
.dev = {
|
||||
.platform_data = &nhk8815_nand_data,
|
||||
},
|
||||
.resource = nhk8815_nand_resources,
|
||||
.num_resources = ARRAY_SIZE(nhk8815_nand_resources),
|
||||
};
|
||||
|
||||
|
||||
#define __MEM_4K_RESOURCE(x) \
|
||||
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
|
||||
|
||||
|
|
@ -81,6 +172,7 @@ static int __init nhk8815_eth_init(void)
|
|||
device_initcall(nhk8815_eth_init);
|
||||
|
||||
static struct platform_device *nhk8815_platform_devices[] __initdata = {
|
||||
&nhk8815_nand_device,
|
||||
&nhk8815_eth_device,
|
||||
/* will add more devices */
|
||||
};
|
||||
|
|
|
|||
29
arch/arm/mach-nomadik/include/mach/fsmc.h
Normal file
29
arch/arm/mach-nomadik/include/mach/fsmc.h
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
|
||||
/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
|
||||
|
||||
#ifndef __ASM_ARCH_FSMC_H
|
||||
#define __ASM_ARCH_FSMC_H
|
||||
|
||||
#include <mach/hardware.h>
|
||||
/*
|
||||
* Register list
|
||||
*/
|
||||
|
||||
/* bus control reg. and bus timing reg. for CS0..CS3 */
|
||||
#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
|
||||
#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
|
||||
|
||||
/* PC-card and NAND:
|
||||
* PCR = control register
|
||||
* PMEM = memory timing
|
||||
* PATT = attribute timing
|
||||
* PIO = I/O timing
|
||||
* PECCR = ECC result
|
||||
*/
|
||||
#define FSMC_PCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
|
||||
#define FSMC_PMEM(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
|
||||
#define FSMC_PATT(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
|
||||
#define FSMC_PIO(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
|
||||
#define FSMC_PECCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
|
||||
|
||||
#endif /* __ASM_ARCH_FSMC_H */
|
||||
16
arch/arm/mach-nomadik/include/mach/nand.h
Normal file
16
arch/arm/mach-nomadik/include/mach/nand.h
Normal file
|
|
@ -0,0 +1,16 @@
|
|||
#ifndef __ASM_ARCH_NAND_H
|
||||
#define __ASM_ARCH_NAND_H
|
||||
|
||||
struct nomadik_nand_platform_data {
|
||||
struct mtd_partition *parts;
|
||||
int nparts;
|
||||
int options;
|
||||
int (*init) (void);
|
||||
int (*exit) (void);
|
||||
};
|
||||
|
||||
#define NAND_IO_DATA 0x40000000
|
||||
#define NAND_IO_CMD 0x40800000
|
||||
#define NAND_IO_ADDR 0x41000000
|
||||
|
||||
#endif /* __ASM_ARCH_NAND_H */
|
||||
|
|
@ -443,6 +443,12 @@ config MTD_NAND_MXC
|
|||
This enables the driver for the NAND flash controller on the
|
||||
MXC processors.
|
||||
|
||||
config MTD_NAND_NOMADIK
|
||||
tristate "ST Nomadik 8815 NAND support"
|
||||
depends on ARCH_NOMADIK
|
||||
help
|
||||
Driver for the NAND flash controller on the Nomadik, with ECC.
|
||||
|
||||
config MTD_NAND_SH_FLCTL
|
||||
tristate "Support for NAND on Renesas SuperH FLCTL"
|
||||
depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
|
||||
|
|
|
|||
|
|
@ -41,5 +41,6 @@ obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
|
|||
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
|
||||
obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
|
||||
|
||||
nand-objs := nand_base.o nand_bbt.o
|
||||
|
|
|
|||
250
drivers/mtd/nand/nomadik_nand.c
Normal file
250
drivers/mtd/nand/nomadik_nand.c
Normal file
|
|
@ -0,0 +1,250 @@
|
|||
/*
|
||||
* drivers/mtd/nand/nomadik_nand.c
|
||||
*
|
||||
* Overview:
|
||||
* Driver for on-board NAND flash on Nomadik Platforms
|
||||
*
|
||||
* Copyright © 2007 STMicroelectronics Pvt. Ltd.
|
||||
* Author: Sachin Verma <sachin.verma@st.com>
|
||||
*
|
||||
* Copyright © 2009 Alessandro Rubini
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/nand_ecc.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/io.h>
|
||||
#include <mach/nand.h>
|
||||
#include <mach/fsmc.h>
|
||||
|
||||
#include <mtd/mtd-abi.h>
|
||||
|
||||
struct nomadik_nand_host {
|
||||
struct mtd_info mtd;
|
||||
struct nand_chip nand;
|
||||
void __iomem *data_va;
|
||||
void __iomem *cmd_va;
|
||||
void __iomem *addr_va;
|
||||
struct nand_bbt_descr *bbt_desc;
|
||||
};
|
||||
|
||||
static struct nand_ecclayout nomadik_ecc_layout = {
|
||||
.eccbytes = 3 * 4,
|
||||
.eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
|
||||
0x02, 0x03, 0x04,
|
||||
0x12, 0x13, 0x14,
|
||||
0x22, 0x23, 0x24,
|
||||
0x32, 0x33, 0x34},
|
||||
/* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
|
||||
.oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
|
||||
};
|
||||
|
||||
static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
|
||||
{
|
||||
/* No need to enable hw ecc, it's on by default */
|
||||
}
|
||||
|
||||
static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
||||
{
|
||||
struct nand_chip *nand = mtd->priv;
|
||||
struct nomadik_nand_host *host = nand->priv;
|
||||
|
||||
if (cmd == NAND_CMD_NONE)
|
||||
return;
|
||||
|
||||
if (ctrl & NAND_CLE)
|
||||
writeb(cmd, host->cmd_va);
|
||||
else
|
||||
writeb(cmd, host->addr_va);
|
||||
}
|
||||
|
||||
static int nomadik_nand_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct nomadik_nand_host *host;
|
||||
struct mtd_info *mtd;
|
||||
struct nand_chip *nand;
|
||||
struct resource *res;
|
||||
int ret = 0;
|
||||
|
||||
/* Allocate memory for the device structure (and zero it) */
|
||||
host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
|
||||
if (!host) {
|
||||
dev_err(&pdev->dev, "Failed to allocate device structure.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* Call the client's init function, if any */
|
||||
if (pdata->init)
|
||||
ret = pdata->init();
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "Init function failed\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* ioremap three regions */
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
|
||||
if (!res) {
|
||||
ret = -EIO;
|
||||
goto err_unmap;
|
||||
}
|
||||
host->addr_va = ioremap(res->start, res->end - res->start + 1);
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
|
||||
if (!res) {
|
||||
ret = -EIO;
|
||||
goto err_unmap;
|
||||
}
|
||||
host->data_va = ioremap(res->start, res->end - res->start + 1);
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
|
||||
if (!res) {
|
||||
ret = -EIO;
|
||||
goto err_unmap;
|
||||
}
|
||||
host->cmd_va = ioremap(res->start, res->end - res->start + 1);
|
||||
|
||||
if (!host->addr_va || !host->data_va || !host->cmd_va) {
|
||||
ret = -ENOMEM;
|
||||
goto err_unmap;
|
||||
}
|
||||
|
||||
/* Link all private pointers */
|
||||
mtd = &host->mtd;
|
||||
nand = &host->nand;
|
||||
mtd->priv = nand;
|
||||
nand->priv = host;
|
||||
|
||||
host->mtd.owner = THIS_MODULE;
|
||||
nand->IO_ADDR_R = host->data_va;
|
||||
nand->IO_ADDR_W = host->data_va;
|
||||
nand->cmd_ctrl = nomadik_cmd_ctrl;
|
||||
|
||||
/*
|
||||
* This stanza declares ECC_HW but uses soft routines. It's because
|
||||
* HW claims to make the calculation but not the correction. However,
|
||||
* I haven't managed to get the desired data out of it until now.
|
||||
*/
|
||||
nand->ecc.mode = NAND_ECC_SOFT;
|
||||
nand->ecc.layout = &nomadik_ecc_layout;
|
||||
nand->ecc.hwctl = nomadik_ecc_control;
|
||||
nand->ecc.size = 512;
|
||||
nand->ecc.bytes = 3;
|
||||
|
||||
nand->options = pdata->options;
|
||||
|
||||
/*
|
||||
* Scan to find existance of the device
|
||||
*/
|
||||
if (nand_scan(&host->mtd, 1)) {
|
||||
ret = -ENXIO;
|
||||
goto err_unmap;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
|
||||
#else
|
||||
pr_info("Registering %s as whole device\n", mtd->name);
|
||||
add_mtd_device(mtd);
|
||||
#endif
|
||||
|
||||
platform_set_drvdata(pdev, host);
|
||||
return 0;
|
||||
|
||||
err_unmap:
|
||||
if (host->cmd_va)
|
||||
iounmap(host->cmd_va);
|
||||
if (host->data_va)
|
||||
iounmap(host->data_va);
|
||||
if (host->addr_va)
|
||||
iounmap(host->addr_va);
|
||||
err:
|
||||
kfree(host);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Clean up routine
|
||||
*/
|
||||
static int nomadik_nand_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct nomadik_nand_host *host = platform_get_drvdata(pdev);
|
||||
struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
|
||||
|
||||
if (pdata->exit)
|
||||
pdata->exit();
|
||||
|
||||
if (host) {
|
||||
iounmap(host->cmd_va);
|
||||
iounmap(host->data_va);
|
||||
iounmap(host->addr_va);
|
||||
kfree(host);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int nomadik_nand_suspend(struct device *dev)
|
||||
{
|
||||
struct nomadik_nand_host *host = dev_get_drvdata(dev);
|
||||
int ret = 0;
|
||||
if (host)
|
||||
ret = host->mtd.suspend(&host->mtd);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int nomadik_nand_resume(struct device *dev)
|
||||
{
|
||||
struct nomadik_nand_host *host = dev_get_drvdata(dev);
|
||||
if (host)
|
||||
host->mtd.resume(&host->mtd);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dev_pm_ops nomadik_nand_pm_ops = {
|
||||
.suspend = nomadik_nand_suspend,
|
||||
.resume = nomadik_nand_resume,
|
||||
};
|
||||
|
||||
static struct platform_driver nomadik_nand_driver = {
|
||||
.probe = nomadik_nand_probe,
|
||||
.remove = nomadik_nand_remove,
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "nomadik_nand",
|
||||
.pm = &nomadik_nand_pm_ops,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init nand_nomadik_init(void)
|
||||
{
|
||||
pr_info("Nomadik NAND driver\n");
|
||||
return platform_driver_register(&nomadik_nand_driver);
|
||||
}
|
||||
|
||||
static void __exit nand_nomadik_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&nomadik_nand_driver);
|
||||
}
|
||||
|
||||
module_init(nand_nomadik_init);
|
||||
module_exit(nand_nomadik_exit);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
|
||||
MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
|
||||
Loading…
Reference in a new issue