mfd: New AB8500 driver

Add a new driver to support the AB8500 Power Management chip, replacing
the current AB4500.  The new driver replaces the old one, instead of an
incremental modification, because this is a substantial overhaul
including:

 - Split of the driver into -core and -spi portions, to allow another
   interface layer to be added

 - Addition of interrupt support

 - Switch to MFD core API for handling subdevices

 - Simplification of the APIs to remove a redundant block parameter

 - Rename of the APIs and macros from ab4500_* to ab8500_*

 - Rename of the files from ab4500* to ab8500*

 - Change of the driver name from ab4500 to ab8500

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Rabin Vincent 2010-05-19 11:39:02 +02:00 committed by Samuel Ortiz
parent 75907a1153
commit 62579266cf
8 changed files with 712 additions and 477 deletions

View file

@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = {
static struct spi_board_info u8500_spi_devices[] = {
{
.modalias = "ab4500",
.modalias = "ab8500",
.controller_data = &ab4500_chip_info,
.max_speed_hz = 12000000,
.bus_num = 0,

View file

@ -420,11 +420,12 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
config AB4500_CORE
tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
depends on SPI
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on SPI=y && GENERIC_HARDIRQS
select MFD_CORE
help
Select this option to enable access to AB4500 power management
Select this option to enable access to AB8500 power management
chip. This connects to U8500 on the SSP/SPI bus and exports
read/write functions for the devices to get access to this chip.
This chip embeds various other multimedia funtionalities as well.

View file

@ -64,8 +64,8 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB4500_CORE) += ab4500-core.o
obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o

View file

@ -1,209 +0,0 @@
/*
* Copyright (C) 2009 ST-Ericsson
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation.
*
* AB4500 is a companion power management chip used with U8500.
* On this platform, this is interfaced with SSP0 controller
* which is a ARM primecell pl022.
*
* At the moment the module just exports read/write features.
* Interrupt management to be added - TODO.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab4500.h>
/* just required if probe fails, we need to
* unregister the device
*/
static struct spi_driver ab4500_driver;
/*
* This funtion writes to any AB4500 registers using
* SPI protocol & before it writes it packs the data
* in the below 24 bit frame format
*
* *|------------------------------------|
* *| 23|22...18|17.......10|9|8|7......0|
* *| r/w bank adr data |
* * ------------------------------------
*
* This function shouldn't be called from interrupt
* context
*/
int ab4500_write(struct ab4500 *ab4500, unsigned char block,
unsigned long addr, unsigned char data)
{
struct spi_transfer xfer;
struct spi_message msg;
int err;
unsigned long spi_data =
block << 18 | addr << 10 | data;
mutex_lock(&ab4500->lock);
ab4500->tx_buf[0] = spi_data;
ab4500->rx_buf[0] = 0;
xfer.tx_buf = ab4500->tx_buf;
xfer.rx_buf = NULL;
xfer.len = sizeof(unsigned long);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
err = spi_sync(ab4500->spi, &msg);
mutex_unlock(&ab4500->lock);
return err;
}
EXPORT_SYMBOL(ab4500_write);
int ab4500_read(struct ab4500 *ab4500, unsigned char block,
unsigned long addr)
{
struct spi_transfer xfer;
struct spi_message msg;
unsigned long spi_data =
1 << 23 | block << 18 | addr << 10;
mutex_lock(&ab4500->lock);
ab4500->tx_buf[0] = spi_data;
ab4500->rx_buf[0] = 0;
xfer.tx_buf = ab4500->tx_buf;
xfer.rx_buf = ab4500->rx_buf;
xfer.len = sizeof(unsigned long);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
spi_sync(ab4500->spi, &msg);
mutex_unlock(&ab4500->lock);
return ab4500->rx_buf[0];
}
EXPORT_SYMBOL(ab4500_read);
/* ref: ab3100 core */
#define AB4500_DEVICE(devname, devid) \
static struct platform_device ab4500_##devname##_device = { \
.name = devid, \
.id = -1, \
}
/* list of childern devices of ab4500 - all are
* not populated here - TODO
*/
AB4500_DEVICE(charger, "ab4500-charger");
AB4500_DEVICE(audio, "ab4500-audio");
AB4500_DEVICE(usb, "ab4500-usb");
AB4500_DEVICE(tvout, "ab4500-tvout");
AB4500_DEVICE(sim, "ab4500-sim");
AB4500_DEVICE(gpadc, "ab4500-gpadc");
AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
AB4500_DEVICE(misc, "ab4500-misc");
static struct platform_device *ab4500_platform_devs[] = {
&ab4500_charger_device,
&ab4500_audio_device,
&ab4500_usb_device,
&ab4500_tvout_device,
&ab4500_sim_device,
&ab4500_gpadc_device,
&ab4500_clkmgt_device,
&ab4500_misc_device,
};
static int __init ab4500_probe(struct spi_device *spi)
{
struct ab4500 *ab4500;
unsigned char revision;
int err = 0;
int i;
ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
if (!ab4500) {
dev_err(&spi->dev, "could not allocate AB4500\n");
err = -ENOMEM;
goto not_detect;
}
ab4500->spi = spi;
spi_set_drvdata(spi, ab4500);
mutex_init(&ab4500->lock);
/* read the revision register */
revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
/* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
if (revision == 0x0 || revision == 0x10)
dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
ab4500_driver.driver.name, revision);
else {
dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
goto not_detect;
}
for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) {
ab4500_platform_devs[i]->dev.parent =
&spi->dev;
platform_set_drvdata(ab4500_platform_devs[i], ab4500);
}
/* register the ab4500 platform devices */
platform_add_devices(ab4500_platform_devs,
ARRAY_SIZE(ab4500_platform_devs));
return err;
not_detect:
spi_unregister_driver(&ab4500_driver);
kfree(ab4500);
return err;
}
static int __devexit ab4500_remove(struct spi_device *spi)
{
struct ab4500 *ab4500 =
spi_get_drvdata(spi);
kfree(ab4500);
return 0;
}
static struct spi_driver ab4500_driver = {
.driver = {
.name = "ab4500",
.owner = THIS_MODULE,
},
.probe = ab4500_probe,
.remove = __devexit_p(ab4500_remove)
};
static int __devinit ab4500_init(void)
{
return spi_register_driver(&ab4500_driver);
}
static void __exit ab4500_exit(void)
{
spi_unregister_driver(&ab4500_driver);
}
subsys_initcall(ab4500_init);
module_exit(ab4500_exit);
MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
MODULE_DESCRIPTION("AB4500 core driver");
MODULE_LICENSE("GPL");

444
drivers/mfd/ab8500-core.c Normal file
View file

@ -0,0 +1,444 @@
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
* Author: Rabin Vincent <rabin.vincent@stericsson.com>
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ab8500.h>
/*
* Interrupt register offsets
* Bank : 0x0E
*/
#define AB8500_IT_SOURCE1_REG 0x0E00
#define AB8500_IT_SOURCE2_REG 0x0E01
#define AB8500_IT_SOURCE3_REG 0x0E02
#define AB8500_IT_SOURCE4_REG 0x0E03
#define AB8500_IT_SOURCE5_REG 0x0E04
#define AB8500_IT_SOURCE6_REG 0x0E05
#define AB8500_IT_SOURCE7_REG 0x0E06
#define AB8500_IT_SOURCE8_REG 0x0E07
#define AB8500_IT_SOURCE19_REG 0x0E12
#define AB8500_IT_SOURCE20_REG 0x0E13
#define AB8500_IT_SOURCE21_REG 0x0E14
#define AB8500_IT_SOURCE22_REG 0x0E15
#define AB8500_IT_SOURCE23_REG 0x0E16
#define AB8500_IT_SOURCE24_REG 0x0E17
/*
* latch registers
*/
#define AB8500_IT_LATCH1_REG 0x0E20
#define AB8500_IT_LATCH2_REG 0x0E21
#define AB8500_IT_LATCH3_REG 0x0E22
#define AB8500_IT_LATCH4_REG 0x0E23
#define AB8500_IT_LATCH5_REG 0x0E24
#define AB8500_IT_LATCH6_REG 0x0E25
#define AB8500_IT_LATCH7_REG 0x0E26
#define AB8500_IT_LATCH8_REG 0x0E27
#define AB8500_IT_LATCH9_REG 0x0E28
#define AB8500_IT_LATCH10_REG 0x0E29
#define AB8500_IT_LATCH19_REG 0x0E32
#define AB8500_IT_LATCH20_REG 0x0E33
#define AB8500_IT_LATCH21_REG 0x0E34
#define AB8500_IT_LATCH22_REG 0x0E35
#define AB8500_IT_LATCH23_REG 0x0E36
#define AB8500_IT_LATCH24_REG 0x0E37
/*
* mask registers
*/
#define AB8500_IT_MASK1_REG 0x0E40
#define AB8500_IT_MASK2_REG 0x0E41
#define AB8500_IT_MASK3_REG 0x0E42
#define AB8500_IT_MASK4_REG 0x0E43
#define AB8500_IT_MASK5_REG 0x0E44
#define AB8500_IT_MASK6_REG 0x0E45
#define AB8500_IT_MASK7_REG 0x0E46
#define AB8500_IT_MASK8_REG 0x0E47
#define AB8500_IT_MASK9_REG 0x0E48
#define AB8500_IT_MASK10_REG 0x0E49
#define AB8500_IT_MASK11_REG 0x0E4A
#define AB8500_IT_MASK12_REG 0x0E4B
#define AB8500_IT_MASK13_REG 0x0E4C
#define AB8500_IT_MASK14_REG 0x0E4D
#define AB8500_IT_MASK15_REG 0x0E4E
#define AB8500_IT_MASK16_REG 0x0E4F
#define AB8500_IT_MASK17_REG 0x0E50
#define AB8500_IT_MASK18_REG 0x0E51
#define AB8500_IT_MASK19_REG 0x0E52
#define AB8500_IT_MASK20_REG 0x0E53
#define AB8500_IT_MASK21_REG 0x0E54
#define AB8500_IT_MASK22_REG 0x0E55
#define AB8500_IT_MASK23_REG 0x0E56
#define AB8500_IT_MASK24_REG 0x0E57
#define AB8500_REV_REG 0x1080
/*
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
* numbers are indexed into this array with (num / 8).
*
* This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at
* offset 0.
*/
static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
};
static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
{
int ret;
dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
ret = ab8500->write(ab8500, addr, data);
if (ret < 0)
dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
addr, ret);
return ret;
}
/**
* ab8500_write() - write an AB8500 register
* @ab8500: device to write to
* @addr: address of the register
* @data: value to write
*/
int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
{
int ret;
mutex_lock(&ab8500->lock);
ret = __ab8500_write(ab8500, addr, data);
mutex_unlock(&ab8500->lock);
return ret;
}
EXPORT_SYMBOL_GPL(ab8500_write);
static int __ab8500_read(struct ab8500 *ab8500, u16 addr)
{
int ret;
ret = ab8500->read(ab8500, addr);
if (ret < 0)
dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
addr, ret);
dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
return ret;
}
/**
* ab8500_read() - read an AB8500 register
* @ab8500: device to read from
* @addr: address of the register
*/
int ab8500_read(struct ab8500 *ab8500, u16 addr)
{
int ret;
mutex_lock(&ab8500->lock);
ret = __ab8500_read(ab8500, addr);
mutex_unlock(&ab8500->lock);
return ret;
}
EXPORT_SYMBOL_GPL(ab8500_read);
/**
* ab8500_set_bits() - set a bitfield in an AB8500 register
* @ab8500: device to read from
* @addr: address of the register
* @mask: mask of the bitfield to modify
* @data: value to set to the bitfield
*/
int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data)
{
int ret;
mutex_lock(&ab8500->lock);
ret = __ab8500_read(ab8500, addr);
if (ret < 0)
goto out;
ret &= ~mask;
ret |= data;
ret = __ab8500_write(ab8500, addr, ret);
out:
mutex_unlock(&ab8500->lock);
return ret;
}
EXPORT_SYMBOL_GPL(ab8500_set_bits);
static void ab8500_irq_lock(unsigned int irq)
{
struct ab8500 *ab8500 = get_irq_chip_data(irq);
mutex_lock(&ab8500->irq_lock);
}
static void ab8500_irq_sync_unlock(unsigned int irq)
{
struct ab8500 *ab8500 = get_irq_chip_data(irq);
int i;
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
u8 old = ab8500->oldmask[i];
u8 new = ab8500->mask[i];
int reg;
if (new == old)
continue;
ab8500->oldmask[i] = new;
reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
ab8500_write(ab8500, reg, new);
}
mutex_unlock(&ab8500->irq_lock);
}
static void ab8500_irq_mask(unsigned int irq)
{
struct ab8500 *ab8500 = get_irq_chip_data(irq);
int offset = irq - ab8500->irq_base;
int index = offset / 8;
int mask = 1 << (offset % 8);
ab8500->mask[index] |= mask;
}
static void ab8500_irq_unmask(unsigned int irq)
{
struct ab8500 *ab8500 = get_irq_chip_data(irq);
int offset = irq - ab8500->irq_base;
int index = offset / 8;
int mask = 1 << (offset % 8);
ab8500->mask[index] &= ~mask;
}
static struct irq_chip ab8500_irq_chip = {
.name = "ab8500",
.bus_lock = ab8500_irq_lock,
.bus_sync_unlock = ab8500_irq_sync_unlock,
.mask = ab8500_irq_mask,
.unmask = ab8500_irq_unmask,
};
static irqreturn_t ab8500_irq(int irq, void *dev)
{
struct ab8500 *ab8500 = dev;
int i;
dev_vdbg(ab8500->dev, "interrupt\n");
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
int regoffset = ab8500_irq_regoffset[i];
int status;
status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset);
if (status <= 0)
continue;
do {
int bit = __ffs(status);
int line = i * 8 + bit;
handle_nested_irq(ab8500->irq_base + line);
status &= ~(1 << bit);
} while (status);
}
return IRQ_HANDLED;
}
static int ab8500_irq_init(struct ab8500 *ab8500)
{
int base = ab8500->irq_base;
int irq;
for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
set_irq_chip_data(irq, ab8500);
set_irq_chip_and_handler(irq, &ab8500_irq_chip,
handle_simple_irq);
set_irq_nested_thread(irq, 1);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
set_irq_noprobe(irq);
#endif
}
return 0;
}
static void ab8500_irq_remove(struct ab8500 *ab8500)
{
int base = ab8500->irq_base;
int irq;
for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
#ifdef CONFIG_ARM
set_irq_flags(irq, 0);
#endif
set_irq_chip_and_handler(irq, NULL, NULL);
set_irq_chip_data(irq, NULL);
}
}
static struct resource ab8500_gpadc_resources[] = {
{
.name = "HW_CONV_END",
.start = AB8500_INT_GP_HW_ADC_CONV_END,
.end = AB8500_INT_GP_HW_ADC_CONV_END,
.flags = IORESOURCE_IRQ,
},
{
.name = "SW_CONV_END",
.start = AB8500_INT_GP_SW_ADC_CONV_END,
.end = AB8500_INT_GP_SW_ADC_CONV_END,
.flags = IORESOURCE_IRQ,
},
};
static struct resource ab8500_rtc_resources[] = {
{
.name = "60S",
.start = AB8500_INT_RTC_60S,
.end = AB8500_INT_RTC_60S,
.flags = IORESOURCE_IRQ,
},
{
.name = "ALARM",
.start = AB8500_INT_RTC_ALARM,
.end = AB8500_INT_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell ab8500_devs[] = {
{
.name = "ab8500-gpadc",
.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
.resources = ab8500_gpadc_resources,
},
{
.name = "ab8500-rtc",
.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
.resources = ab8500_rtc_resources,
},
{ .name = "ab8500-charger", },
{ .name = "ab8500-audio", },
{ .name = "ab8500-usb", },
{ .name = "ab8500-pwm", },
};
int __devinit ab8500_init(struct ab8500 *ab8500)
{
struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
int ret;
int i;
if (plat)
ab8500->irq_base = plat->irq_base;
mutex_init(&ab8500->lock);
mutex_init(&ab8500->irq_lock);
ret = ab8500_read(ab8500, AB8500_REV_REG);
if (ret < 0)
return ret;
/*
* 0x0 - Early Drop
* 0x10 - Cut 1.0
* 0x11 - Cut 1.1
*/
if (ret == 0x0 || ret == 0x10 || ret == 0x11) {
ab8500->revision = ret;
dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret);
} else {
dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret);
return -EINVAL;
}
if (plat && plat->init)
plat->init(ab8500);
/* Clear and mask all interrupts */
for (i = 0; i < 10; i++) {
ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
}
for (i = 18; i < 24; i++) {
ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
}
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
if (ab8500->irq_base) {
ret = ab8500_irq_init(ab8500);
if (ret)
return ret;
ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq,
IRQF_ONESHOT, "ab8500", ab8500);
if (ret)
goto out_removeirq;
}
ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs,
ARRAY_SIZE(ab8500_devs), NULL,
ab8500->irq_base);
if (ret)
goto out_freeirq;
return ret;
out_freeirq:
if (ab8500->irq_base) {
free_irq(ab8500->irq, ab8500);
out_removeirq:
ab8500_irq_remove(ab8500);
}
return ret;
}
int __devexit ab8500_exit(struct ab8500 *ab8500)
{
mfd_remove_devices(ab8500->dev);
if (ab8500->irq_base) {
free_irq(ab8500->irq, ab8500);
ab8500_irq_remove(ab8500);
}
return 0;
}
MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent");
MODULE_DESCRIPTION("AB8500 MFD core");
MODULE_LICENSE("GPL v2");

133
drivers/mfd/ab8500-spi.c Normal file
View file

@ -0,0 +1,133 @@
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>
/*
* This funtion writes to any AB8500 registers using
* SPI protocol & before it writes it packs the data
* in the below 24 bit frame format
*
* *|------------------------------------|
* *| 23|22...18|17.......10|9|8|7......0|
* *| r/w bank adr data |
* * ------------------------------------
*
* This function shouldn't be called from interrupt
* context
*/
static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data)
{
struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
dev);
unsigned long spi_data = addr << 10 | data;
struct spi_transfer xfer;
struct spi_message msg;
ab8500->tx_buf[0] = spi_data;
ab8500->rx_buf[0] = 0;
xfer.tx_buf = ab8500->tx_buf;
xfer.rx_buf = NULL;
xfer.len = sizeof(unsigned long);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
return spi_sync(spi, &msg);
}
static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr)
{
struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
dev);
unsigned long spi_data = 1 << 23 | addr << 10;
struct spi_transfer xfer;
struct spi_message msg;
int ret;
ab8500->tx_buf[0] = spi_data;
ab8500->rx_buf[0] = 0;
xfer.tx_buf = ab8500->tx_buf;
xfer.rx_buf = ab8500->rx_buf;
xfer.len = sizeof(unsigned long);
spi_message_init(&msg);
spi_message_add_tail(&xfer, &msg);
ret = spi_sync(spi, &msg);
if (!ret)
ret = ab8500->rx_buf[0];
return ret;
}
static int __devinit ab8500_spi_probe(struct spi_device *spi)
{
struct ab8500 *ab8500;
int ret;
ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
if (!ab8500)
return -ENOMEM;
ab8500->dev = &spi->dev;
ab8500->irq = spi->irq;
ab8500->read = ab8500_spi_read;
ab8500->write = ab8500_spi_write;
spi_set_drvdata(spi, ab8500);
ret = ab8500_init(ab8500);
if (ret)
kfree(ab8500);
return ret;
}
static int __devexit ab8500_spi_remove(struct spi_device *spi)
{
struct ab8500 *ab8500 = spi_get_drvdata(spi);
ab8500_exit(ab8500);
kfree(ab8500);
return 0;
}
static struct spi_driver ab8500_spi_driver = {
.driver = {
.name = "ab8500",
.owner = THIS_MODULE,
},
.probe = ab8500_spi_probe,
.remove = __devexit_p(ab8500_spi_remove)
};
static int __init ab8500_spi_init(void)
{
return spi_register_driver(&ab8500_spi_driver);
}
subsys_initcall(ab8500_spi_init);
static void __exit ab8500_spi_exit(void)
{
spi_unregister_driver(&ab8500_spi_driver);
}
module_exit(ab8500_spi_exit);
MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
MODULE_DESCRIPTION("AB8500 SPI");
MODULE_LICENSE("GPL v2");

View file

@ -1,262 +0,0 @@
/*
* Copyright (C) 2009 ST-Ericsson
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
* AB4500 device core funtions, for client access
*/
#ifndef MFD_AB4500_H
#define MFD_AB4500_H
#include <linux/device.h>
/*
* AB4500 bank addresses
*/
#define AB4500_SYS_CTRL1_BLOCK 0x1
#define AB4500_SYS_CTRL2_BLOCK 0x2
#define AB4500_REGU_CTRL1 0x3
#define AB4500_REGU_CTRL2 0x4
#define AB4500_USB 0x5
#define AB4500_TVOUT 0x6
#define AB4500_DBI 0x7
#define AB4500_ECI_AV_ACC 0x8
#define AB4500_RESERVED 0x9
#define AB4500_GPADC 0xA
#define AB4500_CHARGER 0xB
#define AB4500_GAS_GAUGE 0xC
#define AB4500_AUDIO 0xD
#define AB4500_INTERRUPT 0xE
#define AB4500_RTC 0xF
#define AB4500_MISC 0x10
#define AB4500_DEBUG 0x12
#define AB4500_PROD_TEST 0x13
#define AB4500_OTP_EMUL 0x15
/*
* System control 1 register offsets.
* Bank = 0x01
*/
#define AB4500_TURNON_STAT_REG 0x0100
#define AB4500_RESET_STAT_REG 0x0101
#define AB4500_PONKEY1_PRESS_STAT_REG 0x0102
#define AB4500_FSM_STAT1_REG 0x0140
#define AB4500_FSM_STAT2_REG 0x0141
#define AB4500_SYSCLK_REQ_STAT_REG 0x0142
#define AB4500_USB_STAT1_REG 0x0143
#define AB4500_USB_STAT2_REG 0x0144
#define AB4500_STATUS_SPARE1_REG 0x0145
#define AB4500_STATUS_SPARE2_REG 0x0146
#define AB4500_CTRL1_REG 0x0180
#define AB4500_CTRL2_REG 0x0181
/*
* System control 2 register offsets.
* bank = 0x02
*/
#define AB4500_CTRL3_REG 0x0200
#define AB4500_MAIN_WDOG_CTRL_REG 0x0201
#define AB4500_MAIN_WDOG_TIMER_REG 0x0202
#define AB4500_LOW_BAT_REG 0x0203
#define AB4500_BATT_OK_REG 0x0204
#define AB4500_SYSCLK_TIMER_REG 0x0205
#define AB4500_SMPSCLK_CTRL_REG 0x0206
#define AB4500_SMPSCLK_SEL1_REG 0x0207
#define AB4500_SMPSCLK_SEL2_REG 0x0208
#define AB4500_SMPSCLK_SEL3_REG 0x0209
#define AB4500_SYSULPCLK_CONF_REG 0x020A
#define AB4500_SYSULPCLK_CTRL1_REG 0x020B
#define AB4500_SYSCLK_CTRL_REG 0x020C
#define AB4500_SYSCLK_REQ1_VALID_REG 0x020D
#define AB4500_SYSCLK_REQ_VALID_REG 0x020E
#define AB4500_SYSCTRL_SPARE_REG 0x020F
#define AB4500_PAD_CONF_REG 0x0210
/*
* Regu control1 register offsets
* Bank = 0x03
*/
#define AB4500_REGU_SERIAL_CTRL1_REG 0x0300
#define AB4500_REGU_SERIAL_CTRL2_REG 0x0301
#define AB4500_REGU_SERIAL_CTRL3_REG 0x0302
#define AB4500_REGU_REQ_CTRL1_REG 0x0303
#define AB4500_REGU_REQ_CTRL2_REG 0x0304
#define AB4500_REGU_REQ_CTRL3_REG 0x0305
#define AB4500_REGU_REQ_CTRL4_REG 0x0306
#define AB4500_REGU_MISC1_REG 0x0380
#define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381
#define AB4500_REGU_VUSB_CTRL_REG 0x0382
#define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383
#define AB4500_REGU_CTRL1_SPARE_REG 0x0384
/*
* Regu control2 Vmod register offsets
*/
#define AB4500_REGU_VMOD_REGU_REG 0x0440
#define AB4500_REGU_VMOD_SEL1_REG 0x0441
#define AB4500_REGU_VMOD_SEL2_REG 0x0442
#define AB4500_REGU_CTRL_DISCH_REG 0x0443
#define AB4500_REGU_CTRL_DISCH2_REG 0x0444
/*
* USB/ULPI register offsets
* Bank : 0x5
*/
#define AB4500_USB_LINE_STAT_REG 0x0580
#define AB4500_USB_LINE_CTRL1_REG 0x0581
#define AB4500_USB_LINE_CTRL2_REG 0x0582
#define AB4500_USB_LINE_CTRL3_REG 0x0583
#define AB4500_USB_LINE_CTRL4_REG 0x0584
#define AB4500_USB_LINE_CTRL5_REG 0x0585
#define AB4500_USB_OTG_CTRL_REG 0x0587
#define AB4500_USB_OTG_STAT_REG 0x0588
#define AB4500_USB_OTG_STAT_REG 0x0588
#define AB4500_USB_CTRL_SPARE_REG 0x0589
#define AB4500_USB_PHY_CTRL_REG 0x058A
/*
* TVOUT / CTRL register offsets
* Bank : 0x06
*/
#define AB4500_TVOUT_CTRL_REG 0x0680
/*
* DBI register offsets
* Bank : 0x07
*/
#define AB4500_DBI_REG1_REG 0x0700
#define AB4500_DBI_REG2_REG 0x0701
/*
* ECI regsiter offsets
* Bank : 0x08
*/
#define AB4500_ECI_CTRL_REG 0x0800
#define AB4500_ECI_HOOKLEVEL_REG 0x0801
#define AB4500_ECI_DATAOUT_REG 0x0802
#define AB4500_ECI_DATAIN_REG 0x0803
/*
* AV Connector register offsets
* Bank : 0x08
*/
#define AB4500_AV_CONN_REG 0x0840
/*
* Accessory detection register offsets
* Bank : 0x08
*/
#define AB4500_ACC_DET_DB1_REG 0x0880
#define AB4500_ACC_DET_DB2_REG 0x0881
/*
* GPADC register offsets
* Bank : 0x0A
*/
#define AB4500_GPADC_CTRL1_REG 0x0A00
#define AB4500_GPADC_CTRL2_REG 0x0A01
#define AB4500_GPADC_CTRL3_REG 0x0A02
#define AB4500_GPADC_AUTO_TIMER_REG 0x0A03
#define AB4500_GPADC_STAT_REG 0x0A04
#define AB4500_GPADC_MANDATAL_REG 0x0A05
#define AB4500_GPADC_MANDATAH_REG 0x0A06
#define AB4500_GPADC_AUTODATAL_REG 0x0A07
#define AB4500_GPADC_AUTODATAH_REG 0x0A08
#define AB4500_GPADC_MUX_CTRL_REG 0x0A09
/*
* Charger / status register offfsets
* Bank : 0x0B
*/
#define AB4500_CH_STATUS1_REG 0x0B00
#define AB4500_CH_STATUS2_REG 0x0B01
#define AB4500_CH_USBCH_STAT1_REG 0x0B02
#define AB4500_CH_USBCH_STAT2_REG 0x0B03
#define AB4500_CH_FSM_STAT_REG 0x0B04
#define AB4500_CH_STAT_REG 0x0B05
/*
* Charger / control register offfsets
* Bank : 0x0B
*/
#define AB4500_CH_VOLT_LVL_REG 0x0B40
/*
* Charger / main control register offfsets
* Bank : 0x0B
*/
#define AB4500_MCH_CTRL1 0x0B80
#define AB4500_MCH_CTRL2 0x0B81
#define AB4500_MCH_IPT_CURLVL_REG 0x0B82
#define AB4500_CH_WD_REG 0x0B83
/*
* Charger / USB control register offsets
* Bank : 0x0B
*/
#define AB4500_USBCH_CTRL1_REG 0x0BC0
#define AB4500_USBCH_CTRL2_REG 0x0BC1
#define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2
/*
* RTC bank register offsets
* Bank : 0xF
*/
#define AB4500_RTC_SOFF_STAT_REG 0x0F00
#define AB4500_RTC_CC_CONF_REG 0x0F01
#define AB4500_RTC_READ_REQ_REG 0x0F02
#define AB4500_RTC_WATCH_TSECMID_REG 0x0F03
#define AB4500_RTC_WATCH_TSECHI_REG 0x0F04
#define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05
#define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06
#define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07
#define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08
#define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09
#define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A
#define AB4500_RTC_STAT_REG 0x0F0B
#define AB4500_RTC_BKUP_CHG_REG 0x0F0C
#define AB4500_RTC_FORCE_BKUP_REG 0x0F0D
#define AB4500_RTC_CALIB_REG 0x0F0E
#define AB4500_RTC_SWITCH_STAT_REG 0x0F0F
/*
* PWM Out generators
* Bank: 0x10
*/
#define AB4500_PWM_OUT_CTRL1_REG 0x1060
#define AB4500_PWM_OUT_CTRL2_REG 0x1061
#define AB4500_PWM_OUT_CTRL3_REG 0x1062
#define AB4500_PWM_OUT_CTRL4_REG 0x1063
#define AB4500_PWM_OUT_CTRL5_REG 0x1064
#define AB4500_PWM_OUT_CTRL6_REG 0x1065
#define AB4500_PWM_OUT_CTRL7_REG 0x1066
#define AB4500_I2C_PAD_CTRL_REG 0x1067
#define AB4500_REV_REG 0x1080
/**
* struct ab4500
* @spi: spi device structure
* @tx_buf: transmit buffer
* @rx_buf: receive buffer
* @lock: sync primitive
*/
struct ab4500 {
struct spi_device *spi;
unsigned long tx_buf[4];
unsigned long rx_buf[4];
struct mutex lock;
};
int ab4500_write(struct ab4500 *ab4500, unsigned char block,
unsigned long addr, unsigned char data);
int ab4500_read(struct ab4500 *ab4500, unsigned char block,
unsigned long addr);
#endif /* MFD_AB4500_H */

128
include/linux/mfd/ab8500.h Normal file
View file

@ -0,0 +1,128 @@
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
*/
#ifndef MFD_AB8500_H
#define MFD_AB8500_H
#include <linux/device.h>
/*
* Interrupts
*/
#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0
#define AB8500_INT_UN_PLUG_TV_DET 1
#define AB8500_INT_PLUG_TV_DET 2
#define AB8500_INT_TEMP_WARM 3
#define AB8500_INT_PON_KEY2DB_F 4
#define AB8500_INT_PON_KEY2DB_R 5
#define AB8500_INT_PON_KEY1DB_F 6
#define AB8500_INT_PON_KEY1DB_R 7
#define AB8500_INT_BATT_OVV 8
#define AB8500_INT_MAIN_CH_UNPLUG_DET 10
#define AB8500_INT_MAIN_CH_PLUG_DET 11
#define AB8500_INT_USB_ID_DET_F 12
#define AB8500_INT_USB_ID_DET_R 13
#define AB8500_INT_VBUS_DET_F 14
#define AB8500_INT_VBUS_DET_R 15
#define AB8500_INT_VBUS_CH_DROP_END 16
#define AB8500_INT_RTC_60S 17
#define AB8500_INT_RTC_ALARM 18
#define AB8500_INT_BAT_CTRL_INDB 20
#define AB8500_INT_CH_WD_EXP 21
#define AB8500_INT_VBUS_OVV 22
#define AB8500_INT_MAIN_CH_DROP_END 23
#define AB8500_INT_CCN_CONV_ACC 24
#define AB8500_INT_INT_AUD 25
#define AB8500_INT_CCEOC 26
#define AB8500_INT_CC_INT_CALIB 27
#define AB8500_INT_LOW_BAT_F 28
#define AB8500_INT_LOW_BAT_R 29
#define AB8500_INT_BUP_CHG_NOT_OK 30
#define AB8500_INT_BUP_CHG_OK 31
#define AB8500_INT_GP_HW_ADC_CONV_END 32
#define AB8500_INT_ACC_DETECT_1DB_F 33
#define AB8500_INT_ACC_DETECT_1DB_R 34
#define AB8500_INT_ACC_DETECT_22DB_F 35
#define AB8500_INT_ACC_DETECT_22DB_R 36
#define AB8500_INT_ACC_DETECT_21DB_F 37
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
#define AB8500_INT_BTEMP_LOW 72
#define AB8500_INT_BTEMP_LOW_MEDIUM 73
#define AB8500_INT_BTEMP_MEDIUM_HIGH 74
#define AB8500_INT_BTEMP_HIGH 75
#define AB8500_INT_USB_CHARGER_NOT_OK 81
#define AB8500_INT_ID_WAKEUP_R 82
#define AB8500_INT_ID_DET_R1R 84
#define AB8500_INT_ID_DET_R2R 85
#define AB8500_INT_ID_DET_R3R 86
#define AB8500_INT_ID_DET_R4R 87
#define AB8500_INT_ID_WAKEUP_F 88
#define AB8500_INT_ID_DET_R1F 90
#define AB8500_INT_ID_DET_R2F 91
#define AB8500_INT_ID_DET_R3F 92
#define AB8500_INT_ID_DET_R4F 93
#define AB8500_INT_USB_CHG_DET_DONE 94
#define AB8500_INT_USB_CH_TH_PROT_F 96
#define AB8500_INT_USB_CH_TH_PROP_R 97
#define AB8500_INT_MAIN_CH_TH_PROP_F 98
#define AB8500_INT_MAIN_CH_TH_PROT_R 99
#define AB8500_INT_USB_CHARGER_NOT_OKF 103
#define AB8500_NR_IRQS 104
#define AB8500_NUM_IRQ_REGS 13
/**
* struct ab8500 - ab8500 internal structure
* @dev: parent device
* @lock: read/write operations lock
* @irq_lock: genirq bus lock
* @revision: chip revision
* @irq: irq line
* @write: register write
* @read: register read
* @rx_buf: rx buf for SPI
* @tx_buf: tx buf for SPI
* @mask: cache of IRQ regs for bus lock
* @oldmask: cache of previous IRQ regs for bus lock
*/
struct ab8500 {
struct device *dev;
struct mutex lock;
struct mutex irq_lock;
int revision;
int irq_base;
int irq;
int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
int (*read) (struct ab8500 *a8500, u16 addr);
unsigned long tx_buf[4];
unsigned long rx_buf[4];
u8 mask[AB8500_NUM_IRQ_REGS];
u8 oldmask[AB8500_NUM_IRQ_REGS];
};
/**
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @init: board-specific initialization after detection of ab8500
*/
struct ab8500_platform_data {
int irq_base;
void (*init) (struct ab8500 *);
};
extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
extern int ab8500_read(struct ab8500 *a8500, u16 addr);
extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
extern int __devinit ab8500_init(struct ab8500 *ab8500);
extern int __devexit ab8500_exit(struct ab8500 *ab8500);
#endif /* MFD_AB8500_H */