Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

USB: remove excess code from hub.c

Browse source 
This patch (as917) removes a now-unnecessary level of subroutine
nesting from hub.c.  Since usb_port_suspend() does nothing but call
hub_port_suspend(), and usb_port_resume() does nothing but call
hub_port_resume(), there's no reason to keep the routines separate.

Also included in the patch are a few cosmetic changes involving
whitespace and use of braces.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Alan Stern 2007-05-30 15:35:16 -04:00 committed by Greg Kroah-Hartman
parent 686314cfbd
commit 624d6c0732
1 changed files with 77 additions and 110 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

179
drivers/usb/core/hub.c
View file

@ -1624,66 +1624,9 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
#ifdef CONFIG_USB_SUSPEND #ifdef CONFIG_USB_SUSPEND
/*
* Selective port suspend reduces power; most suspended devices draw
* less than 500 uA. It's also used in OTG, along with remote wakeup.
* All devices below the suspended port are also suspended.
*
* Devices leave suspend state when the host wakes them up. Some devices
* also support "remote wakeup", where the device can activate the USB
* tree above them to deliver data, such as a keypress or packet. In
* some cases, this wakes the USB host.
*/
static int hub_port_suspend(struct usb_hub *hub, int port1,
struct usb_device *udev)
{
int status;
// dev_dbg(hub->intfdev, "suspend port %d\n", port1);
/* enable remote wakeup when appropriate; this lets the device
* wake up the upstream hub (including maybe the root hub).
*
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
if (udev->do_remote_wakeup) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (status)
dev_dbg(&udev->dev,
"won't remote wakeup, status %d\n",
status);
}
/* see 7.1.7.6 */
status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
if (status) {
dev_dbg(hub->intfdev,
"can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
(void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
dev_dbg(&udev->dev, "usb %ssuspend\n",
udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
return status;
}
/* /*
* usb_port_suspend - suspend a usb device's upstream port * usb_port_suspend - suspend a usb device's upstream port
* @udev: device that's no longer in active use * @udev: device that's no longer in active use, not a root hub
* Context: must be able to sleep; device not locked; pm locks held * Context: must be able to sleep; device not locked; pm locks held
* *
* Suspends a USB device that isn't in active use, conserving power. * Suspends a USB device that isn't in active use, conserving power.
@ -1695,6 +1638,15 @@ static int hub_port_suspend(struct usb_hub *hub, int port1,
* This only affects the USB hardware for a device; its interfaces * This only affects the USB hardware for a device; its interfaces
* (and, for hubs, child devices) must already have been suspended. * (and, for hubs, child devices) must already have been suspended.
* *
* Selective port suspend reduces power; most suspended devices draw
* less than 500 uA. It's also used in OTG, along with remote wakeup.
* All devices below the suspended port are also suspended.
*
* Devices leave suspend state when the host wakes them up. Some devices
* also support "remote wakeup", where the device can activate the USB
* tree above them to deliver data, such as a keypress or packet. In
* some cases, this wakes the USB host.
*
* Suspending OTG devices may trigger HNP, if that's been enabled * Suspending OTG devices may trigger HNP, if that's been enabled
* between a pair of dual-role devices. That will change roles, such * between a pair of dual-role devices. That will change roles, such
* as from A-Host to A-Peripheral or from B-Host back to B-Peripheral. * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
@ -1720,10 +1672,47 @@ static int hub_port_suspend(struct usb_hub *hub, int port1,
*/ */
int usb_port_suspend(struct usb_device *udev) int usb_port_suspend(struct usb_device *udev)
{ {
int status = 0; struct usb_hub *hub = hdev_to_hub(udev->parent);
int port1 = udev->portnum;
int status;
status = hub_port_suspend(hdev_to_hub(udev->parent), // dev_dbg(hub->intfdev, "suspend port %d\n", port1);
udev->portnum, udev);
/* enable remote wakeup when appropriate; this lets the device
* wake up the upstream hub (including maybe the root hub).
*
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
if (udev->do_remote_wakeup) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (status)
dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
status);
}
/* see 7.1.7.6 */
status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
if (status) {
dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
(void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
dev_dbg(&udev->dev, "usb %ssuspend\n",
udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
return status; return status;
} }
@ -1760,11 +1749,10 @@ static int finish_port_resume(struct usb_device *udev)
if (status >= 0) if (status >= 0)
status = (status == 2 ? 0 : -ENODEV); status = (status == 2 ? 0 : -ENODEV);
if (status) if (status) {
dev_dbg(&udev->dev, dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
"gone after usb resume? status %d\n",
status); status);
else if (udev->actconfig) { } else if (udev->actconfig) {
le16_to_cpus(&devstatus); le16_to_cpus(&devstatus);
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
status = usb_control_msg(udev, status = usb_control_msg(udev,
@ -1783,9 +1771,23 @@ static int finish_port_resume(struct usb_device *udev)
return status; return status;
} }
static int /*
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) * usb_port_resume - re-activate a suspended usb device's upstream port
* @udev: device to re-activate, not a root hub
* Context: must be able to sleep; device not locked; pm locks held
*
* This will re-activate the suspended device, increasing power usage
* while letting drivers communicate again with its endpoints.
* USB resume explicitly guarantees that the power session between
* the host and the device is the same as it was when the device
* suspended.
*
* Returns 0 on success, else negative errno.
*/
int usb_port_resume(struct usb_device *udev)
{ {
struct usb_hub *hub = hdev_to_hub(udev->parent);
int port1 = udev->portnum;
int status; int status;
u16 portchange, portstatus; u16 portchange, portstatus;
@ -1802,8 +1804,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
status = clear_port_feature(hub->hdev, status = clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND); port1, USB_PORT_FEAT_SUSPEND);
if (status) { if (status) {
dev_dbg(hub->intfdev, dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
"can't resume port %d, status %d\n",
port1, status); port1, status);
} else { } else {
/* drive resume for at least 20 msec */ /* drive resume for at least 20 msec */
@ -1839,8 +1840,10 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
status = finish_port_resume(udev); status = finish_port_resume(udev);
} }
} }
if (status < 0) if (status < 0) {
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
hub_port_logical_disconnect(hub, port1); hub_port_logical_disconnect(hub, port1);
}
clear_bit(port1, hub->busy_bits); clear_bit(port1, hub->busy_bits);
if (!hub->hdev->parent && !hub->busy_bits[0]) if (!hub->hdev->parent && !hub->busy_bits[0])
@ -1849,30 +1852,6 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
return status; return status;
} }
/*
* usb_port_resume - re-activate a suspended usb device's upstream port
* @udev: device to re-activate
* Context: must be able to sleep; device not locked; pm locks held
*
* This will re-activate the suspended device, increasing power usage
* while letting drivers communicate again with its endpoints.
* USB resume explicitly guarantees that the power session between
* the host and the device is the same as it was when the device
* suspended.
*
* Returns 0 on success, else negative errno.
*/
int usb_port_resume(struct usb_device *udev)
{
int status;
status = hub_port_resume(hdev_to_hub(udev->parent),
udev->portnum, udev);
if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n", status);
return status;
}
static int remote_wakeup(struct usb_device *udev) static int remote_wakeup(struct usb_device *udev)
{ {
int status = 0; int status = 0;
@ -1896,18 +1875,6 @@ int usb_port_suspend(struct usb_device *udev)
return 0; return 0;
} }
static inline int
finish_port_resume(struct usb_device *udev)
{
return 0;
}
static inline int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
return 0;
}
int usb_port_resume(struct usb_device *udev) int usb_port_resume(struct usb_device *udev)
{ {
return 0; return 0;