Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
OHCI: Fix machine check in ohci_hub_status_data
USB: Fix up bogus bInterval values in endpoint descriptors
USB: cxacru: ignore error trying to start ADSL in atm_start
USB: cxacru: create sysfs attributes in atm_start instead of bind
USB: cxacru: add Documentation file
USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu
USB: usb gadgets avoid le{16,32}_to_cpup()
usblp: Don't let suspend to kill ->used
USB: set default y for CONFIG_USB_DEVICE_CLASS
This commit is contained in:
Linus Torvalds
commit
5b65c09e99
13 changed files with 221 additions and 64 deletions
|
|
@ -32,6 +32,8 @@ cops.txt
|
|||
- info on the COPS LocalTalk Linux driver
|
||||
cs89x0.txt
|
||||
- the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver
|
||||
cxacru.txt
|
||||
- Conexant AccessRunner USB ADSL Modem
|
||||
de4x5.txt
|
||||
- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
|
||||
decnet.txt
|
||||
|
|
|
|||
84
Documentation/networking/cxacru.txt
Normal file
84
Documentation/networking/cxacru.txt
Normal file
|
|
@ -0,0 +1,84 @@
|
|||
Firmware is required for this device: http://accessrunner.sourceforge.net/
|
||||
|
||||
While it is capable of managing/maintaining the ADSL connection without the
|
||||
module loaded, the device will sometimes stop responding after unloading the
|
||||
driver and it is necessary to unplug/remove power to the device to fix this.
|
||||
|
||||
Detected devices will appear as ATM devices named "cxacru". In /sys/class/atm/
|
||||
these are directories named cxacruN where N is the device number. A symlink
|
||||
named device points to the USB interface device's directory which contains
|
||||
several sysfs attribute files for retrieving device statistics:
|
||||
|
||||
* adsl_controller_version
|
||||
|
||||
* adsl_headend
|
||||
* adsl_headend_environment
|
||||
Information about the remote headend.
|
||||
|
||||
* downstream_attenuation (dB)
|
||||
* downstream_bits_per_frame
|
||||
* downstream_rate (kbps)
|
||||
* downstream_snr_margin (dB)
|
||||
Downstream stats.
|
||||
|
||||
* upstream_attenuation (dB)
|
||||
* upstream_bits_per_frame
|
||||
* upstream_rate (kbps)
|
||||
* upstream_snr_margin (dB)
|
||||
* transmitter_power (dBm/Hz)
|
||||
Upstream stats.
|
||||
|
||||
* downstream_crc_errors
|
||||
* downstream_fec_errors
|
||||
* downstream_hec_errors
|
||||
* upstream_crc_errors
|
||||
* upstream_fec_errors
|
||||
* upstream_hec_errors
|
||||
Error counts.
|
||||
|
||||
* line_startable
|
||||
Indicates that ADSL support on the device
|
||||
is/can be enabled, see adsl_start.
|
||||
|
||||
* line_status
|
||||
"initialising"
|
||||
"down"
|
||||
"attempting to activate"
|
||||
"training"
|
||||
"channel analysis"
|
||||
"exchange"
|
||||
"waiting"
|
||||
"up"
|
||||
|
||||
Changes between "down" and "attempting to activate"
|
||||
if there is no signal.
|
||||
|
||||
* link_status
|
||||
"not connected"
|
||||
"connected"
|
||||
"lost"
|
||||
|
||||
* mac_address
|
||||
|
||||
* modulation
|
||||
"ANSI T1.413"
|
||||
"ITU-T G.992.1 (G.DMT)"
|
||||
"ITU-T G.992.2 (G.LITE)"
|
||||
|
||||
* startup_attempts
|
||||
Count of total attempts to initialise ADSL.
|
||||
|
||||
To enable/disable ADSL, the following can be written to the adsl_state file:
|
||||
"start"
|
||||
"stop
|
||||
"restart" (stops, waits 1.5s, then starts)
|
||||
"poll" (used to resume status polling if it was disabled due to failure)
|
||||
|
||||
Changes in adsl/line state are reported via kernel log messages:
|
||||
[4942145.150704] ATM dev 0: ADSL state: running
|
||||
[4942243.663766] ATM dev 0: ADSL line: down
|
||||
[4942249.665075] ATM dev 0: ADSL line: attempting to activate
|
||||
[4942253.654954] ATM dev 0: ADSL line: training
|
||||
[4942255.666387] ATM dev 0: ADSL line: channel analysis
|
||||
[4942259.656262] ATM dev 0: ADSL line: exchange
|
||||
[2635357.696901] ATM dev 0: ADSL line: up (8128 kb/s down | 832 kb/s up)
|
||||
|
|
@ -476,8 +476,6 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
|
|||
add_timer(&timer);
|
||||
wait_for_completion(done);
|
||||
status = urb->status;
|
||||
if (status == -ECONNRESET)
|
||||
status = -ETIMEDOUT;
|
||||
del_timer_sync(&timer);
|
||||
|
||||
if (actual_length)
|
||||
|
|
@ -629,10 +627,22 @@ static int cxacru_card_status(struct cxacru_data *instance)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static void cxacru_remove_device_files(struct usbatm_data *usbatm_instance,
|
||||
struct atm_dev *atm_dev)
|
||||
{
|
||||
struct usb_interface *intf = usbatm_instance->usb_intf;
|
||||
|
||||
#define CXACRU_DEVICE_REMOVE_FILE(_name) \
|
||||
device_remove_file(&intf->dev, &dev_attr_##_name);
|
||||
CXACRU_ALL_FILES(REMOVE);
|
||||
#undef CXACRU_DEVICE_REMOVE_FILE
|
||||
}
|
||||
|
||||
static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
|
||||
struct atm_dev *atm_dev)
|
||||
{
|
||||
struct cxacru_data *instance = usbatm_instance->driver_data;
|
||||
struct usb_interface *intf = usbatm_instance->usb_intf;
|
||||
/*
|
||||
struct atm_dev *atm_dev = usbatm_instance->atm_dev;
|
||||
*/
|
||||
|
|
@ -649,14 +659,18 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
|
|||
return ret;
|
||||
}
|
||||
|
||||
#define CXACRU_DEVICE_CREATE_FILE(_name) \
|
||||
ret = device_create_file(&intf->dev, &dev_attr_##_name); \
|
||||
if (unlikely(ret)) \
|
||||
goto fail_sysfs;
|
||||
CXACRU_ALL_FILES(CREATE);
|
||||
#undef CXACRU_DEVICE_CREATE_FILE
|
||||
|
||||
/* start ADSL */
|
||||
mutex_lock(&instance->adsl_state_serialize);
|
||||
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
|
||||
if (ret < 0) {
|
||||
if (ret < 0)
|
||||
atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
|
||||
mutex_unlock(&instance->adsl_state_serialize);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Start status polling */
|
||||
mutex_lock(&instance->poll_state_serialize);
|
||||
|
|
@ -680,6 +694,11 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
|
|||
if (start_polling)
|
||||
cxacru_poll_status(&instance->poll_work.work);
|
||||
return 0;
|
||||
|
||||
fail_sysfs:
|
||||
usb_err(usbatm_instance, "cxacru_atm_start: device_create_file failed (%d)\n", ret);
|
||||
cxacru_remove_device_files(usbatm_instance, atm_dev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void cxacru_poll_status(struct work_struct *work)
|
||||
|
|
@ -1065,13 +1084,6 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
|
|||
goto fail;
|
||||
}
|
||||
|
||||
#define CXACRU_DEVICE_CREATE_FILE(_name) \
|
||||
ret = device_create_file(&intf->dev, &dev_attr_##_name); \
|
||||
if (unlikely(ret)) \
|
||||
goto fail_sysfs;
|
||||
CXACRU_ALL_FILES(CREATE);
|
||||
#undef CXACRU_DEVICE_CREATE_FILE
|
||||
|
||||
usb_fill_int_urb(instance->rcv_urb,
|
||||
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
|
||||
instance->rcv_buf, PAGE_SIZE,
|
||||
|
|
@ -1092,14 +1104,6 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
|
|||
|
||||
return 0;
|
||||
|
||||
fail_sysfs:
|
||||
dbg("cxacru_bind: device_create_file failed (%d)\n", ret);
|
||||
|
||||
#define CXACRU_DEVICE_REMOVE_FILE(_name) \
|
||||
device_remove_file(&intf->dev, &dev_attr_##_name);
|
||||
CXACRU_ALL_FILES(REMOVE);
|
||||
#undef CXACRU_DEVICE_REVOVE_FILE
|
||||
|
||||
fail:
|
||||
free_page((unsigned long) instance->snd_buf);
|
||||
free_page((unsigned long) instance->rcv_buf);
|
||||
|
|
@ -1146,11 +1150,6 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
|
|||
free_page((unsigned long) instance->snd_buf);
|
||||
free_page((unsigned long) instance->rcv_buf);
|
||||
|
||||
#define CXACRU_DEVICE_REMOVE_FILE(_name) \
|
||||
device_remove_file(&intf->dev, &dev_attr_##_name);
|
||||
CXACRU_ALL_FILES(REMOVE);
|
||||
#undef CXACRU_DEVICE_REVOVE_FILE
|
||||
|
||||
kfree(instance);
|
||||
|
||||
usbatm_instance->driver_data = NULL;
|
||||
|
|
@ -1231,6 +1230,7 @@ static struct usbatm_driver cxacru_driver = {
|
|||
.heavy_init = cxacru_heavy_init,
|
||||
.unbind = cxacru_unbind,
|
||||
.atm_start = cxacru_atm_start,
|
||||
.atm_stop = cxacru_remove_device_files,
|
||||
.bulk_in = CXACRU_EP_DATA,
|
||||
.bulk_out = CXACRU_EP_DATA,
|
||||
.rx_padding = 3,
|
||||
|
|
|
|||
|
|
@ -347,10 +347,8 @@ static int handle_bidir (struct usblp *usblp)
|
|||
if (usblp->bidir && usblp->used && !usblp->sleeping) {
|
||||
usblp->readcount = 0;
|
||||
usblp->readurb->dev = usblp->dev;
|
||||
if (usb_submit_urb(usblp->readurb, GFP_KERNEL) < 0) {
|
||||
usblp->used = 0;
|
||||
if (usb_submit_urb(usblp->readurb, GFP_KERNEL) < 0)
|
||||
return -EIO;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
|
@ -412,6 +410,7 @@ static int usblp_open(struct inode *inode, struct file *file)
|
|||
usblp->readurb->status = 0;
|
||||
|
||||
if (handle_bidir(usblp) < 0) {
|
||||
usblp->used = 0;
|
||||
file->private_data = NULL;
|
||||
retval = -EIO;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -40,21 +40,25 @@ config USB_DEVICEFS
|
|||
config USB_DEVICE_CLASS
|
||||
bool "USB device class-devices (DEPRECATED)"
|
||||
depends on USB
|
||||
default n
|
||||
default y
|
||||
---help---
|
||||
Userspace access to USB devices is granted by device-nodes exported
|
||||
directly from the usbdev in sysfs. Old versions of the driver
|
||||
core and udev needed additional class devices to export device nodes.
|
||||
|
||||
These additional devices are difficult to handle in userspace, if
|
||||
information about USB interfaces must be available. One device contains
|
||||
the device node, the other device contains the interface data. Both
|
||||
devices are at the same level in sysfs (siblings) and one can't access
|
||||
the other. The device node created directly by the usbdev is the parent
|
||||
device of the interface and therefore easily accessible from the interface
|
||||
event.
|
||||
information about USB interfaces must be available. One device
|
||||
contains the device node, the other device contains the interface
|
||||
data. Both devices are at the same level in sysfs (siblings) and one
|
||||
can't access the other. The device node created directly by the
|
||||
usb device is the parent device of the interface and therefore
|
||||
easily accessible from the interface event.
|
||||
|
||||
This option provides backward compatibility if needed.
|
||||
This option provides backward compatibility for libusb device
|
||||
nodes (lsusb) when usbfs is not used, and the following udev rule
|
||||
doesn't exist:
|
||||
SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
|
||||
NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644"
|
||||
|
||||
config USB_DYNAMIC_MINORS
|
||||
bool "Dynamic USB minor allocation (EXPERIMENTAL)"
|
||||
|
|
|
|||
|
|
@ -1,4 +1,5 @@
|
|||
#include <linux/usb.h>
|
||||
#include <linux/usb/ch9.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
|
|
@ -49,7 +50,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
|
|||
unsigned char *buffer0 = buffer;
|
||||
struct usb_endpoint_descriptor *d;
|
||||
struct usb_host_endpoint *endpoint;
|
||||
int n, i;
|
||||
int n, i, j;
|
||||
|
||||
d = (struct usb_endpoint_descriptor *) buffer;
|
||||
buffer += d->bLength;
|
||||
|
|
@ -84,6 +85,45 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
|
|||
memcpy(&endpoint->desc, d, n);
|
||||
INIT_LIST_HEAD(&endpoint->urb_list);
|
||||
|
||||
/* If the bInterval value is outside the legal range,
|
||||
* set it to a default value: 32 ms */
|
||||
i = 0; /* i = min, j = max, n = default */
|
||||
j = 255;
|
||||
if (usb_endpoint_xfer_int(d)) {
|
||||
i = 1;
|
||||
switch (to_usb_device(ddev)->speed) {
|
||||
case USB_SPEED_HIGH:
|
||||
n = 9; /* 32 ms = 2^(9-1) uframes */
|
||||
j = 16;
|
||||
break;
|
||||
default: /* USB_SPEED_FULL or _LOW */
|
||||
/* For low-speed, 10 ms is the official minimum.
|
||||
* But some "overclocked" devices might want faster
|
||||
* polling so we'll allow it. */
|
||||
n = 32;
|
||||
break;
|
||||
}
|
||||
} else if (usb_endpoint_xfer_isoc(d)) {
|
||||
i = 1;
|
||||
j = 16;
|
||||
switch (to_usb_device(ddev)->speed) {
|
||||
case USB_SPEED_HIGH:
|
||||
n = 9; /* 32 ms = 2^(9-1) uframes */
|
||||
break;
|
||||
default: /* USB_SPEED_FULL */
|
||||
n = 6; /* 32 ms = 2^(6-1) frames */
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (d->bInterval < i || d->bInterval > j) {
|
||||
dev_warn(ddev, "config %d interface %d altsetting %d "
|
||||
"endpoint 0x%X has an invalid bInterval %d, "
|
||||
"changing to %d\n",
|
||||
cfgno, inum, asnum,
|
||||
d->bEndpointAddress, d->bInterval, n);
|
||||
endpoint->desc.bInterval = n;
|
||||
}
|
||||
|
||||
/* Skip over any Class Specific or Vendor Specific descriptors;
|
||||
* find the next endpoint or interface descriptor */
|
||||
endpoint->extra = buffer;
|
||||
|
|
|
|||
|
|
@ -132,7 +132,7 @@ ep_matches (
|
|||
* where it's an output parameter representing the full speed limit.
|
||||
* the usb spec fixes high speed bulk maxpacket at 512 bytes.
|
||||
*/
|
||||
max = 0x7ff & le16_to_cpup (&desc->wMaxPacketSize);
|
||||
max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
|
||||
switch (type) {
|
||||
case USB_ENDPOINT_XFER_INT:
|
||||
/* INT: limit 64 bytes full speed, 1024 high speed */
|
||||
|
|
|
|||
|
|
@ -1369,12 +1369,12 @@ config_buf (struct dev_data *dev, u8 type, unsigned index)
|
|||
hs = !hs;
|
||||
if (hs) {
|
||||
dev->req->buf = dev->hs_config;
|
||||
len = le16_to_cpup (&dev->hs_config->wTotalLength);
|
||||
len = le16_to_cpu(dev->hs_config->wTotalLength);
|
||||
} else
|
||||
#endif
|
||||
{
|
||||
dev->req->buf = dev->config;
|
||||
len = le16_to_cpup (&dev->config->wTotalLength);
|
||||
len = le16_to_cpu(dev->config->wTotalLength);
|
||||
}
|
||||
((u8 *)dev->req->buf) [1] = type;
|
||||
return len;
|
||||
|
|
@ -1885,7 +1885,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
|
|||
|
||||
/* full or low speed config */
|
||||
dev->config = (void *) kbuf;
|
||||
total = le16_to_cpup (&dev->config->wTotalLength);
|
||||
total = le16_to_cpu(dev->config->wTotalLength);
|
||||
if (!is_valid_config (dev->config) || total >= length)
|
||||
goto fail;
|
||||
kbuf += total;
|
||||
|
|
@ -1894,7 +1894,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
|
|||
/* optional high speed config */
|
||||
if (kbuf [1] == USB_DT_CONFIG) {
|
||||
dev->hs_config = (void *) kbuf;
|
||||
total = le16_to_cpup (&dev->hs_config->wTotalLength);
|
||||
total = le16_to_cpu(dev->hs_config->wTotalLength);
|
||||
if (!is_valid_config (dev->hs_config) || total >= length)
|
||||
goto fail;
|
||||
kbuf += total;
|
||||
|
|
|
|||
|
|
@ -2440,9 +2440,9 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
|
|||
|
||||
tmp = 0;
|
||||
|
||||
#define w_value le16_to_cpup (&u.r.wValue)
|
||||
#define w_index le16_to_cpup (&u.r.wIndex)
|
||||
#define w_length le16_to_cpup (&u.r.wLength)
|
||||
#define w_value le16_to_cpu(u.r.wValue)
|
||||
#define w_index le16_to_cpu(u.r.wIndex)
|
||||
#define w_length le16_to_cpu(u.r.wLength)
|
||||
|
||||
/* ack the irq */
|
||||
writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0);
|
||||
|
|
|
|||
|
|
@ -1651,9 +1651,9 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
|
|||
UDC_EP_NUM_REG = 0;
|
||||
} while (UDC_IRQ_SRC_REG & UDC_SETUP);
|
||||
|
||||
#define w_value le16_to_cpup (&u.r.wValue)
|
||||
#define w_index le16_to_cpup (&u.r.wIndex)
|
||||
#define w_length le16_to_cpup (&u.r.wLength)
|
||||
#define w_value le16_to_cpu(u.r.wValue)
|
||||
#define w_index le16_to_cpu(u.r.wIndex)
|
||||
#define w_length le16_to_cpu(u.r.wLength)
|
||||
|
||||
/* Delegate almost all control requests to the gadget driver,
|
||||
* except for a handful of ch9 status/feature requests that
|
||||
|
|
|
|||
|
|
@ -186,10 +186,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
|
|||
DEBUG("query OID %08x value, len %d:\n", OID, buf_len);
|
||||
for (i = 0; i < buf_len; i += 16) {
|
||||
DEBUG ("%03d: %08x %08x %08x %08x\n", i,
|
||||
le32_to_cpup((__le32 *)&buf[i]),
|
||||
le32_to_cpup((__le32 *)&buf[i + 4]),
|
||||
le32_to_cpup((__le32 *)&buf[i + 8]),
|
||||
le32_to_cpup((__le32 *)&buf[i + 12]));
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i])),
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i + 4])),
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i + 8])),
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i + 12])));
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -665,7 +669,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
|
|||
break;
|
||||
case OID_PNP_QUERY_POWER:
|
||||
DEBUG("%s: OID_PNP_QUERY_POWER D%d\n", __FUNCTION__,
|
||||
le32_to_cpup((__le32 *) buf) - 1);
|
||||
le32_to_cpu(get_unaligned((__le32 *)buf)) - 1);
|
||||
/* only suspend is a real power state, and
|
||||
* it can't be entered by OID_PNP_SET_POWER...
|
||||
*/
|
||||
|
|
@ -704,10 +708,14 @@ static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len,
|
|||
DEBUG("set OID %08x value, len %d:\n", OID, buf_len);
|
||||
for (i = 0; i < buf_len; i += 16) {
|
||||
DEBUG ("%03d: %08x %08x %08x %08x\n", i,
|
||||
le32_to_cpup((__le32 *)&buf[i]),
|
||||
le32_to_cpup((__le32 *)&buf[i + 4]),
|
||||
le32_to_cpup((__le32 *)&buf[i + 8]),
|
||||
le32_to_cpup((__le32 *)&buf[i + 12]));
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i])),
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i + 4])),
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i + 8])),
|
||||
le32_to_cpu(get_unaligned((__le32 *)
|
||||
&buf[i + 12])));
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -721,7 +729,8 @@ static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len,
|
|||
* PROMISCUOUS, DIRECTED,
|
||||
* MULTICAST, ALL_MULTICAST, BROADCAST
|
||||
*/
|
||||
*params->filter = (u16) le32_to_cpup((__le32 *)buf);
|
||||
*params->filter = (u16) le32_to_cpu(get_unaligned(
|
||||
(__le32 *)buf));
|
||||
DEBUG("%s: OID_GEN_CURRENT_PACKET_FILTER %08x\n",
|
||||
__FUNCTION__, *params->filter);
|
||||
|
||||
|
|
@ -771,7 +780,7 @@ static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len,
|
|||
* resuming, Windows forces a reset, and then SET_POWER D0.
|
||||
* FIXME ... then things go batty; Windows wedges itself.
|
||||
*/
|
||||
i = le32_to_cpup((__force __le32 *)buf);
|
||||
i = le32_to_cpu(get_unaligned((__le32 *)buf));
|
||||
DEBUG("%s: OID_PNP_SET_POWER D%d\n", __FUNCTION__, i - 1);
|
||||
switch (i) {
|
||||
case NdisDeviceStateD0:
|
||||
|
|
@ -1058,8 +1067,8 @@ int rndis_msg_parser (u8 configNr, u8 *buf)
|
|||
return -ENOMEM;
|
||||
|
||||
tmp = (__le32 *) buf;
|
||||
MsgType = le32_to_cpup(tmp++);
|
||||
MsgLength = le32_to_cpup(tmp++);
|
||||
MsgType = le32_to_cpu(get_unaligned(tmp++));
|
||||
MsgLength = le32_to_cpu(get_unaligned(tmp++));
|
||||
|
||||
if (configNr >= RNDIS_MAX_CONFIGS)
|
||||
return -ENOTSUPP;
|
||||
|
|
|
|||
|
|
@ -417,6 +417,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
|
|||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave (&ohci->lock, flags);
|
||||
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
|
||||
goto done;
|
||||
|
||||
/* undocumented erratum seen on at least rev D */
|
||||
if ((ohci->flags & OHCI_QUIRK_AMD756)
|
||||
|
|
|
|||
|
|
@ -1179,8 +1179,8 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
|
|||
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
||||
US_FL_FIX_INQUIRY ),
|
||||
|
||||
/* These are virtual windows driver CDs, which the zd1211rw driver automatically
|
||||
* converts into a WLAN devices. */
|
||||
/* These are virtual windows driver CDs, which the zd1211rw driver
|
||||
* automatically converts into WLAN devices. */
|
||||
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
|
||||
"ZyXEL",
|
||||
"G-220F USB-WLAN Install",
|
||||
|
|
@ -1193,6 +1193,14 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
|
|||
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
||||
US_FL_IGNORE_DEVICE ),
|
||||
|
||||
/* SanDisk that has a second LUN for a driver ISO, reported by
|
||||
* Ben Collins <bcollins@ubuntu.com> */
|
||||
UNUSUAL_DEV( 0x0781, 0x5406, 0x0000, 0xffff,
|
||||
"SanDisk",
|
||||
"U3 Cruzer Micro driver ISO",
|
||||
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
||||
US_FL_SINGLE_LUN ),
|
||||
|
||||
#ifdef CONFIG_USB_STORAGE_ISD200
|
||||
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
|
||||
"ATI",
|
||||
|
|
@ -1271,6 +1279,15 @@ UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
|
|||
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
||||
US_FL_FIX_INQUIRY ),
|
||||
|
||||
/* Reported by Edward Chapman (taken from linux-usb mailing list)
|
||||
Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
|
||||
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
|
||||
"Netac",
|
||||
"USB Flash Disk",
|
||||
US_SC_DEVICE, US_PR_DEVICE, NULL,
|
||||
US_FL_IGNORE_RESIDUE ),
|
||||
|
||||
|
||||
/* Patch by Stephan Walter <stephan.walter@epfl.ch>
|
||||
* I don't know why, but it works... */
|
||||
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
|
||||
|
|
|
|||
Loading…
Reference in a new issue