omap3: Fix handling some GPIO's for WLAN-BT combo on IGEP v2

Some GPIO's used by WLAN-BT combo on IGEP v2 depends on hardware
revision. This patch handles these GPIO's.

  ----------------------------------------------------------
 |       Hw Rev.       | WIFI_NPD | WIFI_NRESET | BT_NRESET |
  ----------------------------------------------------------
 |  B                  | gpio94  |   gpio95    |     -      |
 |  B/C (B-compatible) | gpio94  |   gpio95    |  gpio137   |
 |  C                  | gpio138 |   gpio139   |  gpio137   |
  ----------------------------------------------------------

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Enric Balletbo i Serra 2010-10-08 10:22:43 -07:00 committed by Tony Lindgren
parent 3f8c48d95f
commit 5a9fcc9980

View file

@ -43,18 +43,24 @@
#define IGEP2_GPIO_LED0_RED 27 #define IGEP2_GPIO_LED0_RED 27
#define IGEP2_GPIO_LED1_RED 28 #define IGEP2_GPIO_LED1_RED 28
#define IGEP2_GPIO_DVI_PUP 170 #define IGEP2_GPIO_DVI_PUP 170
#define IGEP2_GPIO_WIFI_NPD 94
#define IGEP2_GPIO_WIFI_NRESET 95 #define IGEP2_RB_GPIO_WIFI_NPD 94
#define IGEP2_RB_GPIO_WIFI_NRESET 95
#define IGEP2_RB_GPIO_BT_NRESET 137
#define IGEP2_RC_GPIO_WIFI_NPD 138
#define IGEP2_RC_GPIO_WIFI_NRESET 139
#define IGEP2_RC_GPIO_BT_NRESET 137
/* /*
* IGEP2 Hardware Revision Table * IGEP2 Hardware Revision Table
* *
* -------------------------- * --------------------------------------------------------------------------
* | Id. | Hw Rev. | HW0 (28) | * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
* -------------------------- * --------------------------------------------------------------------------
* | 0 | B/C | high | * | 0 | B | high | gpio94 | gpio95 | - |
* | 1 | C | low | * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 |
* -------------------------- * | 1 | C | low | gpio138 | gpio139 | gpio137 |
* --------------------------------------------------------------------------
*/ */
#define IGEP2_BOARD_HWREV_B 0 #define IGEP2_BOARD_HWREV_B 0
@ -296,12 +302,14 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_cd = -EINVAL, .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL, .gpio_wp = -EINVAL,
}, },
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
{ {
.mmc = 2, .mmc = 2,
.caps = MMC_CAP_4_BIT_DATA, .caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL, .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL, .gpio_wp = -EINVAL,
}, },
#endif
{} /* Terminator */ {} /* Terminator */
}; };
@ -578,6 +586,50 @@ static struct omap_board_mux board_mux[] __initdata = {
#define board_mux NULL #define board_mux NULL
#endif #endif
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
static void __init igep2_wlan_bt_init(void)
{
unsigned npd, wreset, btreset;
/* GPIO's for WLAN-BT combo depends on hardware revision */
if (hwrev == IGEP2_BOARD_HWREV_B) {
npd = IGEP2_RB_GPIO_WIFI_NPD;
wreset = IGEP2_RB_GPIO_WIFI_NRESET;
btreset = IGEP2_RB_GPIO_BT_NRESET;
} else if (hwrev == IGEP2_BOARD_HWREV_C) {
npd = IGEP2_RC_GPIO_WIFI_NPD;
wreset = IGEP2_RC_GPIO_WIFI_NRESET;
btreset = IGEP2_RC_GPIO_BT_NRESET;
} else
return;
/* Set GPIO's for WLAN-BT combo module */
if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) &&
(gpio_direction_output(npd, 1) == 0)) {
gpio_export(npd, 0);
} else
pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n");
if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) &&
(gpio_direction_output(wreset, 1) == 0)) {
gpio_export(wreset, 0);
gpio_set_value(wreset, 0);
udelay(10);
gpio_set_value(wreset, 1);
} else
pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n");
if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) &&
(gpio_direction_output(btreset, 1) == 0)) {
gpio_export(btreset, 0);
} else
pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n");
}
#else
static inline void __init igep2_wlan_bt_init(void) { }
#endif
static void __init igep2_init(void) static void __init igep2_init(void)
{ {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@ -596,22 +648,12 @@ static void __init igep2_init(void)
igep2_display_init(); igep2_display_init();
igep2_init_smsc911x(); igep2_init_smsc911x();
/* GPIO W-LAN + Bluetooth combo module */ /*
if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && * WLAN-BT combo module from MuRata wich has a Marvell WLAN
(gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) { * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
gpio_export(IGEP2_GPIO_WIFI_NPD, 0); */
/* gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */ igep2_wlan_bt_init();
} else
pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
(gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
udelay(10);
gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
} else
pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
} }
MACHINE_START(IGEP0020, "IGEP v2 board") MACHINE_START(IGEP0020, "IGEP v2 board")