Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 3389/1: typo and grammar fix [ARM] 3386/1: AT91RM9200 Clock update [ARM] 3384/1: AT91RM9200: Timer [ARM] 3382/1: ixp2000: unify defconfigs [ARM] 3381/1: ixp2000: fix slowport write timing control register fields [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check [ARM] 3379/1: ixp2000: use generic 8250 debug macros [ARM] 3378/1: ixp2000: fix gpio interrupt handling [ARM] Quieten spurious IRQ detection [ARM] Use kcalloc to allocate counter_config array rather than kmalloc [ARM] Oprofile: dynamically allocate counter_config [ARM] Oprofile: Convert semaphore to mutex [ARM] 3376/2: S3C2410 - update defconfig [ARM] 3375/1: S3C2440 - fix osiris machine build [ARM] 3374/1: ep93xx: gpio interrupt support [ARM] 3361/1: S3C24XX - add USB bus clock source [ARM] 3360/1: S3C2440 - add set rate methods and camera clock [ARM] 3359/1: S3C24XX - add support for clk_set_rate [ARM] Convert kmalloc+memset to kzalloc [ARM] 3373/1: move uengine loader to arch/arm/common ...
This commit is contained in:
commit
591eb85ecd
155 changed files with 3030 additions and 3920 deletions
|
@ -10,6 +10,8 @@ Introduction
|
|||
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and
|
||||
the S3C2440 are supported CPUs.
|
||||
|
||||
Support for the S3C2400 series is in progress.
|
||||
|
||||
|
||||
Configuration
|
||||
-------------
|
||||
|
@ -32,6 +34,11 @@ Machines
|
|||
A general purpose development board, see EB2410ITX.txt for further
|
||||
details
|
||||
|
||||
Simtec Electronics IM2440D20 (Osiris)
|
||||
|
||||
CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
|
||||
and a PCMCIA controller.
|
||||
|
||||
Samsung SMDK2410
|
||||
|
||||
Samsung's own development board, geared for PDA work.
|
||||
|
@ -85,6 +92,26 @@ Adding New Machines
|
|||
mailing list information.
|
||||
|
||||
|
||||
I2C
|
||||
---
|
||||
|
||||
The hardware I2C core in the CPU is supported in single master
|
||||
mode, and can be configured via platform data.
|
||||
|
||||
|
||||
RTC
|
||||
---
|
||||
|
||||
Support for the onboard RTC unit, including alarm function.
|
||||
|
||||
|
||||
Watchdog
|
||||
--------
|
||||
|
||||
The onchip watchdog is available via the standard watchdog
|
||||
interface.
|
||||
|
||||
|
||||
NAND
|
||||
----
|
||||
|
||||
|
@ -121,6 +148,15 @@ Clock Management
|
|||
various clock units
|
||||
|
||||
|
||||
Suspend to RAM
|
||||
--------------
|
||||
|
||||
For boards that provide support for suspend to RAM, the
|
||||
system can be placed into low power suspend.
|
||||
|
||||
See Suspend.txt for more information.
|
||||
|
||||
|
||||
Platform Data
|
||||
-------------
|
||||
|
||||
|
@ -158,6 +194,7 @@ Platform Data
|
|||
exported outside arch/arm/mach-s3c2410/, or exported to
|
||||
modules via EXPORT_SYMBOL() and related functions.
|
||||
|
||||
|
||||
Port Contributors
|
||||
-----------------
|
||||
|
||||
|
@ -188,8 +225,11 @@ Document Changes
|
|||
08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
|
||||
08 Mar 2005 - BJD - Added section on adding machines
|
||||
09 Sep 2005 - BJD - Added section on platform data
|
||||
11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections
|
||||
11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information
|
||||
|
||||
|
||||
Document Author
|
||||
---------------
|
||||
|
||||
Ben Dooks, (c) 2004-2005 Simtec Electronics
|
||||
Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
|
||||
|
|
|
@ -108,6 +108,13 @@ config ARCH_EBSA110
|
|||
Ethernet interface, two PCMCIA sockets, two serial ports and a
|
||||
parallel port.
|
||||
|
||||
config ARCH_EP93XX
|
||||
bool "EP93xx-based"
|
||||
select ARM_AMBA
|
||||
select ARM_VIC
|
||||
help
|
||||
This enables support for the Cirrus EP93xx series of CPUs.
|
||||
|
||||
config ARCH_FOOTBRIDGE
|
||||
bool "FootBridge"
|
||||
select FOOTBRIDGE
|
||||
|
@ -250,6 +257,8 @@ endchoice
|
|||
|
||||
source "arch/arm/mach-clps711x/Kconfig"
|
||||
|
||||
source "arch/arm/mach-ep93xx/Kconfig"
|
||||
|
||||
source "arch/arm/mach-footbridge/Kconfig"
|
||||
|
||||
source "arch/arm/mach-integrator/Kconfig"
|
||||
|
@ -434,6 +443,13 @@ config NO_IDLE_HZ
|
|||
Currently at least OMAP, PXA2xx and SA11x0 platforms are known
|
||||
to have accurate timekeeping with dynamic tick.
|
||||
|
||||
config HZ
|
||||
int
|
||||
default 128 if ARCH_L7200
|
||||
default 200 if ARCH_EBSA110 || ARCH_S3C2410
|
||||
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
|
||||
default 100
|
||||
|
||||
config AEABI
|
||||
bool "Use the ARM EABI to compile the kernel"
|
||||
help
|
||||
|
|
|
@ -105,6 +105,7 @@ endif
|
|||
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
|
||||
machine-$(CONFIG_ARCH_REALVIEW) := realview
|
||||
machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
|
||||
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
|
||||
|
||||
ifeq ($(CONFIG_ARCH_EBSA110),y)
|
||||
# This is what happens if you forget the IOCS16 line.
|
||||
|
|
|
@ -15,3 +15,4 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
|
|||
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
|
||||
obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
|
||||
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
|
||||
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
|
||||
|
|
|
@ -5,7 +5,7 @@
|
|||
* limited DMA windows. These functions utilize bounce buffers to
|
||||
* copy data to/from buffers located outside the DMA region. This
|
||||
* only works for systems in which DMA memory is at the bottom of
|
||||
* RAM and the remainder of memory is at the top an the DMA memory
|
||||
* RAM, the remainder of memory is at the top and the DMA memory
|
||||
* can be marked as ZONE_DMA. Anything beyond that such as discontigous
|
||||
* DMA windows will require custom implementations that reserve memory
|
||||
* areas at early bootup.
|
||||
|
|
|
@ -60,7 +60,7 @@ struct locomo {
|
|||
unsigned long phys;
|
||||
unsigned int irq;
|
||||
spinlock_t lock;
|
||||
void *base;
|
||||
void __iomem *base;
|
||||
};
|
||||
|
||||
struct locomo_dev_info {
|
||||
|
@ -162,7 +162,7 @@ static void locomo_handler(unsigned int irq, struct irqdesc *desc,
|
|||
{
|
||||
int req, i;
|
||||
struct irqdesc *d;
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
|
||||
/* Acknowledge the parent IRQ */
|
||||
desc->chip->ack(irq);
|
||||
|
@ -189,7 +189,7 @@ static void locomo_ack_irq(unsigned int irq)
|
|||
|
||||
static void locomo_mask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_ICR);
|
||||
r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
|
||||
|
@ -198,7 +198,7 @@ static void locomo_mask_irq(unsigned int irq)
|
|||
|
||||
static void locomo_unmask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_ICR);
|
||||
r |= (0x0010 << (irq - LOCOMO_IRQ_START));
|
||||
|
@ -215,7 +215,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc,
|
|||
struct pt_regs *regs)
|
||||
{
|
||||
struct irqdesc *d;
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
|
||||
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
|
||||
d = irq_desc + LOCOMO_IRQ_KEY_START;
|
||||
|
@ -225,7 +225,7 @@ static void locomo_key_handler(unsigned int irq, struct irqdesc *desc,
|
|||
|
||||
static void locomo_key_ack_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
|
||||
r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
|
||||
|
@ -234,7 +234,7 @@ static void locomo_key_ack_irq(unsigned int irq)
|
|||
|
||||
static void locomo_key_mask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
|
||||
r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
|
||||
|
@ -243,7 +243,7 @@ static void locomo_key_mask_irq(unsigned int irq)
|
|||
|
||||
static void locomo_key_unmask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
|
||||
r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
|
||||
|
@ -261,7 +261,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc,
|
|||
{
|
||||
int req, i;
|
||||
struct irqdesc *d;
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
|
||||
req = locomo_readl(mapbase + LOCOMO_GIR) &
|
||||
locomo_readl(mapbase + LOCOMO_GPD) &
|
||||
|
@ -280,7 +280,7 @@ static void locomo_gpio_handler(unsigned int irq, struct irqdesc *desc,
|
|||
|
||||
static void locomo_gpio_ack_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_GWE);
|
||||
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
|
||||
|
@ -297,7 +297,7 @@ static void locomo_gpio_ack_irq(unsigned int irq)
|
|||
|
||||
static void locomo_gpio_mask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_GIE);
|
||||
r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
|
||||
|
@ -306,7 +306,7 @@ static void locomo_gpio_mask_irq(unsigned int irq)
|
|||
|
||||
static void locomo_gpio_unmask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_GIE);
|
||||
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
|
||||
|
@ -323,7 +323,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc,
|
|||
struct pt_regs *regs)
|
||||
{
|
||||
struct irqdesc *d;
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
|
||||
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
|
||||
d = irq_desc + LOCOMO_IRQ_LT_START;
|
||||
|
@ -333,7 +333,7 @@ static void locomo_lt_handler(unsigned int irq, struct irqdesc *desc,
|
|||
|
||||
static void locomo_lt_ack_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_LTINT);
|
||||
r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
|
||||
|
@ -342,7 +342,7 @@ static void locomo_lt_ack_irq(unsigned int irq)
|
|||
|
||||
static void locomo_lt_mask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_LTINT);
|
||||
r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
|
||||
|
@ -351,7 +351,7 @@ static void locomo_lt_mask_irq(unsigned int irq)
|
|||
|
||||
static void locomo_lt_unmask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_LTINT);
|
||||
r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
|
||||
|
@ -369,7 +369,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
|
|||
{
|
||||
int req, i;
|
||||
struct irqdesc *d;
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
|
||||
req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F;
|
||||
if (req) {
|
||||
|
@ -386,7 +386,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
|
|||
|
||||
static void locomo_spi_ack_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_SPIWE);
|
||||
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
|
||||
|
@ -403,7 +403,7 @@ static void locomo_spi_ack_irq(unsigned int irq)
|
|||
|
||||
static void locomo_spi_mask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_SPIIE);
|
||||
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
|
||||
|
@ -412,7 +412,7 @@ static void locomo_spi_mask_irq(unsigned int irq)
|
|||
|
||||
static void locomo_spi_unmask_irq(unsigned int irq)
|
||||
{
|
||||
void *mapbase = get_irq_chipdata(irq);
|
||||
void __iomem *mapbase = get_irq_chipdata(irq);
|
||||
unsigned int r;
|
||||
r = locomo_readl(mapbase + LOCOMO_SPIIE);
|
||||
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
|
||||
|
@ -428,7 +428,7 @@ static struct irqchip locomo_spi_chip = {
|
|||
static void locomo_setup_irq(struct locomo *lchip)
|
||||
{
|
||||
int irq;
|
||||
void *irqbase = lchip->base;
|
||||
void __iomem *irqbase = lchip->base;
|
||||
|
||||
/*
|
||||
* Install handler for IRQ_LOCOMO_HW.
|
||||
|
@ -501,12 +501,11 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
|
|||
struct locomo_dev *dev;
|
||||
int ret;
|
||||
|
||||
dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL);
|
||||
dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
|
||||
if (!dev) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
memset(dev, 0, sizeof(struct locomo_dev));
|
||||
|
||||
strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
|
||||
/*
|
||||
|
@ -664,12 +663,10 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
|
|||
unsigned long r;
|
||||
int i, ret = -ENODEV;
|
||||
|
||||
lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL);
|
||||
lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
|
||||
if (!lchip)
|
||||
return -ENOMEM;
|
||||
|
||||
memset(lchip, 0, sizeof(struct locomo));
|
||||
|
||||
spin_lock_init(&lchip->lock);
|
||||
|
||||
lchip->dev = me;
|
||||
|
|
|
@ -26,6 +26,7 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/clk.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
@ -36,10 +37,6 @@
|
|||
|
||||
#include <asm/hardware/sa1111.h>
|
||||
|
||||
#ifdef CONFIG_ARCH_PXA
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#endif
|
||||
|
||||
extern void __init sa1110_mb_enable(void);
|
||||
|
||||
/*
|
||||
|
@ -51,6 +48,7 @@ extern void __init sa1110_mb_enable(void);
|
|||
*/
|
||||
struct sa1111 {
|
||||
struct device *dev;
|
||||
struct clk *clk;
|
||||
unsigned long phys;
|
||||
int irq;
|
||||
spinlock_t lock;
|
||||
|
@ -451,19 +449,7 @@ static void sa1111_wake(struct sa1111 *sachip)
|
|||
|
||||
spin_lock_irqsave(&sachip->lock, flags);
|
||||
|
||||
#ifdef CONFIG_ARCH_SA1100
|
||||
/*
|
||||
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
|
||||
* (SA-1110 Developer's Manual, section 9.1.2.1)
|
||||
*/
|
||||
GAFR |= GPIO_32_768kHz;
|
||||
GPDR |= GPIO_32_768kHz;
|
||||
TUCR = TUCR_3_6864MHz;
|
||||
#elif CONFIG_ARCH_PXA
|
||||
pxa_gpio_mode(GPIO11_3_6MHz_MD);
|
||||
#else
|
||||
#error missing clock setup
|
||||
#endif
|
||||
clk_enable(sachip->clk);
|
||||
|
||||
/*
|
||||
* Turn VCO on, and disable PLL Bypass.
|
||||
|
@ -555,12 +541,11 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
|
|||
struct sa1111_dev *dev;
|
||||
int ret;
|
||||
|
||||
dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
|
||||
dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
|
||||
if (!dev) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
memset(dev, 0, sizeof(struct sa1111_dev));
|
||||
|
||||
snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
|
||||
"%4.4lx", info->offset);
|
||||
|
@ -635,11 +620,15 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
|
|||
unsigned int has_devs, val;
|
||||
int i, ret = -ENODEV;
|
||||
|
||||
sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL);
|
||||
sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
|
||||
if (!sachip)
|
||||
return -ENOMEM;
|
||||
|
||||
memset(sachip, 0, sizeof(struct sa1111));
|
||||
sachip->clk = clk_get(me, "GPIO27_CLK");
|
||||
if (!sachip->clk) {
|
||||
ret = PTR_ERR(sachip->clk);
|
||||
goto err_free;
|
||||
}
|
||||
|
||||
spin_lock_init(&sachip->lock);
|
||||
|
||||
|
@ -656,7 +645,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
|
|||
sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
|
||||
if (!sachip->base) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
goto err_clkput;
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -666,7 +655,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
|
|||
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
|
||||
printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
|
||||
ret = -ENODEV;
|
||||
goto unmap;
|
||||
goto err_unmap;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
|
||||
|
@ -726,9 +715,11 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
|
|||
|
||||
return 0;
|
||||
|
||||
unmap:
|
||||
err_unmap:
|
||||
iounmap(sachip->base);
|
||||
out:
|
||||
err_clkput:
|
||||
clk_put(sachip->clk);
|
||||
err_free:
|
||||
kfree(sachip);
|
||||
return ret;
|
||||
}
|
||||
|
@ -751,6 +742,8 @@ static void __sa1111_remove(struct sa1111 *sachip)
|
|||
sa1111_writel(0, irqbase + SA1111_WAKEEN0);
|
||||
sa1111_writel(0, irqbase + SA1111_WAKEEN1);
|
||||
|
||||
clk_disable(sachip->clk);
|
||||
|
||||
if (sachip->irq != NO_IRQ) {
|
||||
set_irq_chained_handler(sachip->irq, NULL);
|
||||
set_irq_data(sachip->irq, NULL);
|
||||
|
@ -759,6 +752,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
|
|||
}
|
||||
|
||||
iounmap(sachip->base);
|
||||
clk_put(sachip->clk);
|
||||
kfree(sachip);
|
||||
}
|
||||
|
||||
|
@ -857,6 +851,8 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
|
|||
sa1111_writel(0, sachip->base + SA1111_SKPWM0);
|
||||
sa1111_writel(0, sachip->base + SA1111_SKPWM1);
|
||||
|
||||
clk_disable(sachip->clk);
|
||||
|
||||
spin_unlock_irqrestore(&sachip->lock, flags);
|
||||
|
||||
return 0;
|
||||
|
|
|
@ -132,12 +132,10 @@ int __init scoop_probe(struct platform_device *pdev)
|
|||
if (!mem)
|
||||
return -EINVAL;
|
||||
|
||||
devptr = kmalloc(sizeof(struct scoop_dev), GFP_KERNEL);
|
||||
|
||||
devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL);
|
||||
if (!devptr)
|
||||
return -ENOMEM;
|
||||
return -ENOMEM;
|
||||
|
||||
memset(devptr, 0, sizeof(struct scoop_dev));
|
||||
spin_lock_init(&devptr->scoop_lock);
|
||||
|
||||
inf = pdev->dev.platform_data;
|
||||
|
|
|
@ -19,7 +19,7 @@
|
|||
#include <linux/string.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/arch/ixp2000-regs.h>
|
||||
#include <asm/arch/uengine.h>
|
||||
#include <asm/hardware/uengine.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#define USTORE_ADDRESS 0x000
|
|
@ -22,22 +22,21 @@
|
|||
#include <linux/list.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/hardware/vic.h>
|
||||
|
||||
static void __iomem *vic_base;
|
||||
|
||||
static void vic_mask_irq(unsigned int irq)
|
||||
{
|
||||
irq -= IRQ_VIC_START;
|
||||
writel(1 << irq, vic_base + VIC_INT_ENABLE_CLEAR);
|
||||
void __iomem *base = get_irq_chipdata(irq);
|
||||
irq &= 31;
|
||||
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
|
||||
}
|
||||
|
||||
static void vic_unmask_irq(unsigned int irq)
|
||||
{
|
||||
irq -= IRQ_VIC_START;
|
||||
writel(1 << irq, vic_base + VIC_INT_ENABLE);
|
||||
void __iomem *base = get_irq_chipdata(irq);
|
||||
irq &= 31;
|
||||
writel(1 << irq, base + VIC_INT_ENABLE);
|
||||
}
|
||||
|
||||
static struct irqchip vic_chip = {
|
||||
|
@ -46,43 +45,49 @@ static struct irqchip vic_chip = {
|
|||
.unmask = vic_unmask_irq,
|
||||
};
|
||||
|
||||
void __init vic_init(void __iomem *base, u32 vic_sources)
|
||||
/**
|
||||
* vic_init - initialise a vectored interrupt controller
|
||||
* @base: iomem base address
|
||||
* @irq_start: starting interrupt number, must be muliple of 32
|
||||
* @vic_sources: bitmask of interrupt sources to allow
|
||||
*/
|
||||
void __init vic_init(void __iomem *base, unsigned int irq_start,
|
||||
u32 vic_sources)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
vic_base = base;
|
||||
|
||||
/* Disable all interrupts initially. */
|
||||
|
||||
writel(0, vic_base + VIC_INT_SELECT);
|
||||
writel(0, vic_base + VIC_INT_ENABLE);
|
||||
writel(~0, vic_base + VIC_INT_ENABLE_CLEAR);
|
||||
writel(0, vic_base + VIC_IRQ_STATUS);
|
||||
writel(0, vic_base + VIC_ITCR);
|
||||
writel(~0, vic_base + VIC_INT_SOFT_CLEAR);
|
||||
writel(0, base + VIC_INT_SELECT);
|
||||
writel(0, base + VIC_INT_ENABLE);
|
||||
writel(~0, base + VIC_INT_ENABLE_CLEAR);
|
||||
writel(0, base + VIC_IRQ_STATUS);
|
||||
writel(0, base + VIC_ITCR);
|
||||
writel(~0, base + VIC_INT_SOFT_CLEAR);
|
||||
|
||||
/*
|
||||
* Make sure we clear all existing interrupts
|
||||
*/
|
||||
writel(0, vic_base + VIC_VECT_ADDR);
|
||||
writel(0, base + VIC_VECT_ADDR);
|
||||
for (i = 0; i < 19; i++) {
|
||||
unsigned int value;
|
||||
|
||||
value = readl(vic_base + VIC_VECT_ADDR);
|
||||
writel(value, vic_base + VIC_VECT_ADDR);
|
||||
value = readl(base + VIC_VECT_ADDR);
|
||||
writel(value, base + VIC_VECT_ADDR);
|
||||
}
|
||||
|
||||
for (i = 0; i < 16; i++) {
|
||||
void __iomem *reg = vic_base + VIC_VECT_CNTL0 + (i * 4);
|
||||
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
|
||||
writel(VIC_VECT_CNTL_ENABLE | i, reg);
|
||||
}
|
||||
|
||||
writel(32, vic_base + VIC_DEF_VECT_ADDR);
|
||||
writel(32, base + VIC_DEF_VECT_ADDR);
|
||||
|
||||
for (i = 0; i < 32; i++) {
|
||||
unsigned int irq = IRQ_VIC_START + i;
|
||||
unsigned int irq = irq_start + i;
|
||||
|
||||
set_irq_chip(irq, &vic_chip);
|
||||
set_irq_chipdata(irq, base);
|
||||
|
||||
if (vic_sources & (1 << i)) {
|
||||
set_irq_handler(irq, do_level_IRQ);
|
||||
|
|
|
@ -1,11 +1,10 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.14-git13
|
||||
# Thu Nov 10 15:12:48 2005
|
||||
# Linux kernel version: 2.6.16
|
||||
# Mon Mar 20 14:54:51 2006
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
|
||||
|
@ -13,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
|
@ -25,38 +23,42 @@ CONFIG_LOCALVERSION_AUTO=y
|
|||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_UID16=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_OBSOLETE_INTERMODULE=y
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
|
@ -70,14 +72,14 @@ CONFIG_KMOD=y
|
|||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
# CONFIG_DEFAULT_AS is not set
|
||||
CONFIG_DEFAULT_DEADLINE=y
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
CONFIG_DEFAULT_IOSCHED="deadline"
|
||||
|
||||
#
|
||||
# System Type
|
||||
|
@ -86,11 +88,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
CONFIG_ARCH_EP93XX=y
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
CONFIG_ARCH_IXP2000=y
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
|
@ -104,46 +107,44 @@ CONFIG_ARCH_IXP2000=y
|
|||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
# CONFIG_ARCH_AT91RM9200 is not set
|
||||
|
||||
#
|
||||
# Intel IXP2400/2800 Implementation Options
|
||||
# Cirrus EP93xx Implementation Options
|
||||
#
|
||||
CONFIG_CRUNCH=y
|
||||
|
||||
#
|
||||
# IXP2400/2800 Platforms
|
||||
# EP93xx Platforms
|
||||
#
|
||||
CONFIG_ARCH_ENP2611=y
|
||||
# CONFIG_ARCH_IXDP2400 is not set
|
||||
# CONFIG_ARCH_IXDP2800 is not set
|
||||
# CONFIG_ARCH_IXDP2401 is not set
|
||||
# CONFIG_ARCH_IXDP2801 is not set
|
||||
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
|
||||
CONFIG_MACH_GESBC9312=y
|
||||
CONFIG_MACH_TS72XX=y
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_XSCALE=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_ARM920T=y
|
||||
CONFIG_CPU_32v4=y
|
||||
CONFIG_CPU_ABRT_EV4T=y
|
||||
CONFIG_CPU_CACHE_V4WT=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_XSCALE_PMU=y
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
CONFIG_ARM_VIC=y
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_LEGACY_PROC=y
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
CONFIG_ARM_AMBA=y
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
|
@ -155,6 +156,8 @@ CONFIG_PCI_LEGACY_PROC=y
|
|||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
CONFIG_HZ=100
|
||||
# CONFIG_AEABI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
|
@ -171,7 +174,7 @@ CONFIG_ALIGNMENT_TRAP=y
|
|||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
|
||||
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
|
@ -197,6 +200,7 @@ CONFIG_BINFMT_ELF=y
|
|||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_APM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
|
@ -206,10 +210,13 @@ CONFIG_NET=y
|
|||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_MMAP=y
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_XFRM=y
|
||||
# CONFIG_XFRM_USER is not set
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
|
@ -242,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y
|
|||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
|
@ -259,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y
|
|||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
|
@ -278,21 +289,26 @@ CONFIG_TCP_CONG_BIC=y
|
|||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
|
||||
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
|
||||
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
|
@ -312,7 +328,11 @@ CONFIG_MTD_BLOCK=y
|
|||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_NOSWAP=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||
# CONFIG_MTD_CFI_GEOMETRY is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
|
@ -323,29 +343,31 @@ CONFIG_MTD_CFI_I1=y
|
|||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_OTP is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
# CONFIG_MTD_CFI_AMDSTD is not set
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_CFI_AMDSTD_RETRY=0
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
CONFIG_MTD_ROM=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_XIP is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_START=0x0
|
||||
CONFIG_MTD_PHYSMAP_LEN=0x0
|
||||
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
|
||||
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
||||
CONFIG_MTD_IXP2000=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
|
@ -362,7 +384,11 @@ CONFIG_MTD_IXP2000=y
|
|||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_VERIFY_WRITE=y
|
||||
CONFIG_MTD_NAND_IDS=y
|
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||
# CONFIG_MTD_NAND_NANDSIM is not set
|
||||
|
||||
#
|
||||
# OneNAND Flash Device Drivers
|
||||
|
@ -381,19 +407,12 @@ CONFIG_MTD_IXP2000=y
|
|||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
# CONFIG_BLK_DEV_RAM is not set
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
|
@ -401,7 +420,40 @@ CONFIG_BLK_DEV_INITRD=y
|
|||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
CONFIG_SCSI=y
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
# CONFIG_BLK_DEV_SR is not set
|
||||
# CONFIG_CHR_DEV_SG is not set
|
||||
# CONFIG_CHR_DEV_SCH is not set
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
#
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
# CONFIG_SCSI_CONSTANTS is not set
|
||||
# CONFIG_SCSI_LOGGING is not set
|
||||
|
||||
#
|
||||
# SCSI Transport Attributes
|
||||
#
|
||||
# CONFIG_SCSI_SPI_ATTRS is not set
|
||||
# CONFIG_SCSI_FC_ATTRS is not set
|
||||
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
||||
# CONFIG_SCSI_SAS_ATTRS is not set
|
||||
|
||||
#
|
||||
# SCSI low-level drivers
|
||||
#
|
||||
# CONFIG_ISCSI_TCP is not set
|
||||
# CONFIG_SCSI_SATA is not set
|
||||
# CONFIG_SCSI_DEBUG is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
|
@ -416,27 +468,20 @@ CONFIG_BLK_DEV_INITRD=y
|
|||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
|
@ -447,66 +492,20 @@ CONFIG_DUMMY=y
|
|||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
CONFIG_NET_PCI=y
|
||||
# CONFIG_PCNET32 is not set
|
||||
# CONFIG_AMD8111_ETH is not set
|
||||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
# CONFIG_DGRS is not set
|
||||
CONFIG_EEPRO100=y
|
||||
# CONFIG_E100 is not set
|
||||
# CONFIG_FEALNX is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_8139CP is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
|
@ -516,29 +515,7 @@ CONFIG_EEPRO100=y
|
|||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
CONFIG_WAN=y
|
||||
# CONFIG_DSCC4 is not set
|
||||
# CONFIG_LANMEDIA is not set
|
||||
# CONFIG_SYNCLINK_SYNCPPP is not set
|
||||
CONFIG_HDLC=y
|
||||
CONFIG_HDLC_RAW=y
|
||||
# CONFIG_HDLC_RAW_ETH is not set
|
||||
CONFIG_HDLC_CISCO=y
|
||||
CONFIG_HDLC_FR=y
|
||||
CONFIG_HDLC_PPP=y
|
||||
|
||||
#
|
||||
# X.25/LAPB support is disabled
|
||||
#
|
||||
# CONFIG_PCI200SYN is not set
|
||||
# CONFIG_WANXL is not set
|
||||
# CONFIG_PC300 is not set
|
||||
# CONFIG_FARSYNC is not set
|
||||
CONFIG_DLCI=y
|
||||
CONFIG_DLCI_COUNT=24
|
||||
CONFIG_DLCI_MAX=8
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
|
@ -554,28 +531,7 @@ CONFIG_DLCI_MAX=8
|
|||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
|
@ -592,20 +548,18 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=2
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_AMBA_PL010=y
|
||||
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
|
||||
# CONFIG_SERIAL_AMBA_PL011 is not set
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
|
@ -622,23 +576,19 @@ CONFIG_WATCHDOG=y
|
|||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_IXP2000_WATCHDOG=y
|
||||
|
||||
#
|
||||
# PCI-based Watchdog Cards
|
||||
# USB-based Watchdog Cards
|
||||
#
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
# CONFIG_WDTPCI is not set
|
||||
# CONFIG_USBPCWATCHDOG is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
|
@ -663,27 +613,8 @@ CONFIG_I2C_ALGOBIT=y
|
|||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
# CONFIG_I2C_ALI1535 is not set
|
||||
# CONFIG_I2C_ALI1563 is not set
|
||||
# CONFIG_I2C_ALI15X3 is not set
|
||||
# CONFIG_I2C_AMD756 is not set
|
||||
# CONFIG_I2C_AMD8111 is not set
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
CONFIG_I2C_IXP2000=y
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_SCx200_ACB is not set
|
||||
# CONFIG_I2C_SIS5595 is not set
|
||||
# CONFIG_I2C_SIS630 is not set
|
||||
# CONFIG_I2C_SIS96X is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
# CONFIG_I2C_VIA is not set
|
||||
# CONFIG_I2C_VIAPRO is not set
|
||||
# CONFIG_I2C_VOODOO3 is not set
|
||||
# CONFIG_I2C_PCA_ISA is not set
|
||||
|
||||
#
|
||||
|
@ -691,17 +622,28 @@ CONFIG_I2C_IXP2000=y
|
|||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
CONFIG_SENSORS_EEPROM=y
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_RTC8564 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_RTC_X1205_I2C is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
CONFIG_I2C_DEBUG_CORE=y
|
||||
CONFIG_I2C_DEBUG_ALGO=y
|
||||
CONFIG_I2C_DEBUG_BUS=y
|
||||
CONFIG_I2C_DEBUG_CHIP=y
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
|
@ -716,6 +658,7 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
|
@ -733,10 +676,8 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_SIS5595 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VIA686A is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83792D is not set
|
||||
# CONFIG_SENSORS_W83L785TS is not set
|
||||
|
@ -776,13 +717,143 @@ CONFIG_HWMON=y
|
|||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_BANDWIDTH is not set
|
||||
CONFIG_USB_DYNAMIC_MINORS=y
|
||||
# CONFIG_USB_OTG is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_ACM is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
CONFIG_USB_STORAGE=y
|
||||
# CONFIG_USB_STORAGE_DEBUG is not set
|
||||
# CONFIG_USB_STORAGE_DATAFAB is not set
|
||||
# CONFIG_USB_STORAGE_FREECOM is not set
|
||||
# CONFIG_USB_STORAGE_DPCM is not set
|
||||
# CONFIG_USB_STORAGE_USBAT is not set
|
||||
# CONFIG_USB_STORAGE_SDDR09 is not set
|
||||
# CONFIG_USB_STORAGE_SDDR55 is not set
|
||||
# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
||||
# CONFIG_USB_STORAGE_ALAUDA is not set
|
||||
# CONFIG_USB_LIBUSUAL is not set
|
||||
|
||||
#
|
||||
# USB Input Devices
|
||||
#
|
||||
# CONFIG_USB_HID is not set
|
||||
|
||||
#
|
||||
# USB HID Boot Protocol drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
# CONFIG_USB_MICROTEK is not set
|
||||
|
||||
#
|
||||
# USB Multimedia devices
|
||||
#
|
||||
# CONFIG_USB_DABUSB is not set
|
||||
|
||||
#
|
||||
# Video4Linux support is needed for USB Multimedia device support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Network Adapters
|
||||
#
|
||||
# CONFIG_USB_CATC is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
CONFIG_USB_RTL8150=y
|
||||
# CONFIG_USB_USBNET is not set
|
||||
# CONFIG_USB_MON is not set
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Serial Converter support
|
||||
#
|
||||
CONFIG_USB_SERIAL=y
|
||||
CONFIG_USB_SERIAL_CONSOLE=y
|
||||
# CONFIG_USB_SERIAL_GENERIC is not set
|
||||
# CONFIG_USB_SERIAL_AIRPRIME is not set
|
||||
# CONFIG_USB_SERIAL_ANYDATA is not set
|
||||
# CONFIG_USB_SERIAL_BELKIN is not set
|
||||
# CONFIG_USB_SERIAL_WHITEHEAT is not set
|
||||
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
|
||||
# CONFIG_USB_SERIAL_CP2101 is not set
|
||||
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
|
||||
# CONFIG_USB_SERIAL_EMPEG is not set
|
||||
# CONFIG_USB_SERIAL_FTDI_SIO is not set
|
||||
# CONFIG_USB_SERIAL_VISOR is not set
|
||||
# CONFIG_USB_SERIAL_IPAQ is not set
|
||||
# CONFIG_USB_SERIAL_IR is not set
|
||||
# CONFIG_USB_SERIAL_EDGEPORT is not set
|
||||
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
|
||||
# CONFIG_USB_SERIAL_GARMIN is not set
|
||||
# CONFIG_USB_SERIAL_IPW is not set
|
||||
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
|
||||
# CONFIG_USB_SERIAL_KEYSPAN is not set
|
||||
# CONFIG_USB_SERIAL_KLSI is not set
|
||||
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
|
||||
# CONFIG_USB_SERIAL_MCT_U232 is not set
|
||||
CONFIG_USB_SERIAL_PL2303=y
|
||||
# CONFIG_USB_SERIAL_HP4X is not set
|
||||
# CONFIG_USB_SERIAL_SAFE is not set
|
||||
# CONFIG_USB_SERIAL_TI is not set
|
||||
# CONFIG_USB_SERIAL_CYBERJACK is not set
|
||||
# CONFIG_USB_SERIAL_XIRCOM is not set
|
||||
# CONFIG_USB_SERIAL_OMNINET is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_AUERSWALD is not set
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_LEGOTOWER is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGETKIT is not set
|
||||
# CONFIG_USB_PHIDGETSERVO is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_LD is not set
|
||||
# CONFIG_USB_TEST is not set
|
||||
|
||||
#
|
||||
# USB DSL modem support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
|
@ -797,21 +868,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
|
|||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
# CONFIG_EXT3_FS_XATTR is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
|
@ -830,8 +897,11 @@ CONFIG_DNOTIFY=y
|
|||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
CONFIG_FAT_FS=y
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
|
@ -843,6 +913,7 @@ CONFIG_TMPFS=y
|
|||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
|
@ -911,12 +982,52 @@ CONFIG_MSDOS_PARTITION=y
|
|||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_KARMA_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ASCII is not set
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
|
@ -927,13 +1038,14 @@ CONFIG_MSDOS_PARTITION=y
|
|||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
CONFIG_DEBUG_SLAB=y
|
||||
CONFIG_DEBUG_MUTEXES=y
|
||||
CONFIG_DEBUG_SPINLOCK=y
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
|
@ -941,9 +1053,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
|
|||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FORCED_INLINING=y
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
||||
CONFIG_DEBUG_WAITQ=y
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
|
@ -969,6 +1082,6 @@ CONFIG_DEBUG_LL=y
|
|||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_LIBCRC32C=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
|
@ -1,976 +0,0 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.14-git13
|
||||
# Thu Nov 10 15:14:50 2005
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
CONFIG_ARCH_IXP2000=y
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
|
||||
#
|
||||
# Intel IXP2400/2800 Implementation Options
|
||||
#
|
||||
|
||||
#
|
||||
# IXP2400/2800 Platforms
|
||||
#
|
||||
# CONFIG_ARCH_ENP2611 is not set
|
||||
# CONFIG_ARCH_IXDP2400 is not set
|
||||
# CONFIG_ARCH_IXDP2800 is not set
|
||||
CONFIG_ARCH_IXDP2401=y
|
||||
# CONFIG_ARCH_IXDP2801 is not set
|
||||
CONFIG_ARCH_IXDP2X01=y
|
||||
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_XSCALE=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_XSCALE_PMU=y
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_LEGACY_PROC=y
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_FPE_NWFPE_XP=y
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_MMAP=y
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
|
||||
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
# CONFIG_MTD_CFI_AMDSTD is not set
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_XIP is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
||||
CONFIG_MTD_IXP2000=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLKMTD is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
|
||||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
|
||||
#
|
||||
# OneNAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
CONFIG_NET_PCI=y
|
||||
# CONFIG_PCNET32 is not set
|
||||
# CONFIG_AMD8111_ETH is not set
|
||||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
CONFIG_CS89x0=y
|
||||
# CONFIG_DGRS is not set
|
||||
CONFIG_EEPRO100=y
|
||||
# CONFIG_E100 is not set
|
||||
# CONFIG_FEALNX is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_8139CP is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
CONFIG_WAN=y
|
||||
# CONFIG_DSCC4 is not set
|
||||
# CONFIG_LANMEDIA is not set
|
||||
# CONFIG_SYNCLINK_SYNCPPP is not set
|
||||
CONFIG_HDLC=y
|
||||
CONFIG_HDLC_RAW=y
|
||||
# CONFIG_HDLC_RAW_ETH is not set
|
||||
CONFIG_HDLC_CISCO=y
|
||||
CONFIG_HDLC_FR=y
|
||||
CONFIG_HDLC_PPP=y
|
||||
|
||||
#
|
||||
# X.25/LAPB support is disabled
|
||||
#
|
||||
# CONFIG_PCI200SYN is not set
|
||||
# CONFIG_WANXL is not set
|
||||
# CONFIG_PC300 is not set
|
||||
# CONFIG_FARSYNC is not set
|
||||
CONFIG_DLCI=y
|
||||
CONFIG_DLCI_COUNT=24
|
||||
CONFIG_DLCI_MAX=8
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=3
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_IXP2000_WATCHDOG=y
|
||||
|
||||
#
|
||||
# PCI-based Watchdog Cards
|
||||
#
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
# CONFIG_WDTPCI is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_TELCLOCK is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
|
||||
#
|
||||
# I2C Algorithms
|
||||
#
|
||||
CONFIG_I2C_ALGOBIT=y
|
||||
# CONFIG_I2C_ALGOPCF is not set
|
||||
# CONFIG_I2C_ALGOPCA is not set
|
||||
|
||||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
# CONFIG_I2C_ALI1535 is not set
|
||||
# CONFIG_I2C_ALI1563 is not set
|
||||
# CONFIG_I2C_ALI15X3 is not set
|
||||
# CONFIG_I2C_AMD756 is not set
|
||||
# CONFIG_I2C_AMD8111 is not set
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
CONFIG_I2C_IXP2000=y
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_SCx200_ACB is not set
|
||||
# CONFIG_I2C_SIS5595 is not set
|
||||
# CONFIG_I2C_SIS630 is not set
|
||||
# CONFIG_I2C_SIS96X is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
# CONFIG_I2C_VIA is not set
|
||||
# CONFIG_I2C_VIAPRO is not set
|
||||
# CONFIG_I2C_VOODOO3 is not set
|
||||
# CONFIG_I2C_PCA_ISA is not set
|
||||
|
||||
#
|
||||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
CONFIG_SENSORS_EEPROM=y
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_RTC8564 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_RTC_X1205_I2C is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ADM1021 is not set
|
||||
# CONFIG_SENSORS_ADM1025 is not set
|
||||
# CONFIG_SENSORS_ADM1026 is not set
|
||||
# CONFIG_SENSORS_ADM1031 is not set
|
||||
# CONFIG_SENSORS_ADM9240 is not set
|
||||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM63 is not set
|
||||
# CONFIG_SENSORS_LM75 is not set
|
||||
# CONFIG_SENSORS_LM77 is not set
|
||||
# CONFIG_SENSORS_LM78 is not set
|
||||
# CONFIG_SENSORS_LM80 is not set
|
||||
# CONFIG_SENSORS_LM83 is not set
|
||||
# CONFIG_SENSORS_LM85 is not set
|
||||
# CONFIG_SENSORS_LM87 is not set
|
||||
# CONFIG_SENSORS_LM90 is not set
|
||||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_SIS5595 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VIA686A is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83792D is not set
|
||||
# CONFIG_SENSORS_W83L785TS is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia Capabilities Port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS_FS is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
# CONFIG_ACORN_PARTITION is not set
|
||||
# CONFIG_OSF_PARTITION is not set
|
||||
# CONFIG_AMIGA_PARTITION is not set
|
||||
# CONFIG_ATARI_PARTITION is not set
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_BSD_DISKLABEL is not set
|
||||
# CONFIG_MINIX_SUBPARTITION is not set
|
||||
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||
# CONFIG_LDM_PARTITION is not set
|
||||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
|
@ -1,975 +0,0 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.14-git13
|
||||
# Thu Nov 10 15:14:56 2005
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
CONFIG_ARCH_IXP2000=y
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
|
||||
#
|
||||
# Intel IXP2400/2800 Implementation Options
|
||||
#
|
||||
|
||||
#
|
||||
# IXP2400/2800 Platforms
|
||||
#
|
||||
# CONFIG_ARCH_ENP2611 is not set
|
||||
# CONFIG_ARCH_IXDP2400 is not set
|
||||
CONFIG_ARCH_IXDP2800=y
|
||||
CONFIG_ARCH_IXDP2X00=y
|
||||
# CONFIG_ARCH_IXDP2401 is not set
|
||||
# CONFIG_ARCH_IXDP2801 is not set
|
||||
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_XSCALE=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_XSCALE_PMU=y
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_LEGACY_PROC=y
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_FPE_NWFPE_XP=y
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_MMAP=y
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
|
||||
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
# CONFIG_MTD_CFI_AMDSTD is not set
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_XIP is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
||||
CONFIG_MTD_IXP2000=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLKMTD is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
|
||||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
|
||||
#
|
||||
# OneNAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
CONFIG_NET_PCI=y
|
||||
# CONFIG_PCNET32 is not set
|
||||
# CONFIG_AMD8111_ETH is not set
|
||||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
# CONFIG_DGRS is not set
|
||||
CONFIG_EEPRO100=y
|
||||
# CONFIG_E100 is not set
|
||||
# CONFIG_FEALNX is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_8139CP is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
CONFIG_WAN=y
|
||||
# CONFIG_DSCC4 is not set
|
||||
# CONFIG_LANMEDIA is not set
|
||||
# CONFIG_SYNCLINK_SYNCPPP is not set
|
||||
CONFIG_HDLC=y
|
||||
CONFIG_HDLC_RAW=y
|
||||
# CONFIG_HDLC_RAW_ETH is not set
|
||||
CONFIG_HDLC_CISCO=y
|
||||
CONFIG_HDLC_FR=y
|
||||
CONFIG_HDLC_PPP=y
|
||||
|
||||
#
|
||||
# X.25/LAPB support is disabled
|
||||
#
|
||||
# CONFIG_PCI200SYN is not set
|
||||
# CONFIG_WANXL is not set
|
||||
# CONFIG_PC300 is not set
|
||||
# CONFIG_FARSYNC is not set
|
||||
CONFIG_DLCI=y
|
||||
CONFIG_DLCI_COUNT=24
|
||||
CONFIG_DLCI_MAX=8
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_IXP2000_WATCHDOG=y
|
||||
|
||||
#
|
||||
# PCI-based Watchdog Cards
|
||||
#
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
# CONFIG_WDTPCI is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_TELCLOCK is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
|
||||
#
|
||||
# I2C Algorithms
|
||||
#
|
||||
CONFIG_I2C_ALGOBIT=y
|
||||
# CONFIG_I2C_ALGOPCF is not set
|
||||
# CONFIG_I2C_ALGOPCA is not set
|
||||
|
||||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
# CONFIG_I2C_ALI1535 is not set
|
||||
# CONFIG_I2C_ALI1563 is not set
|
||||
# CONFIG_I2C_ALI15X3 is not set
|
||||
# CONFIG_I2C_AMD756 is not set
|
||||
# CONFIG_I2C_AMD8111 is not set
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
CONFIG_I2C_IXP2000=y
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_SCx200_ACB is not set
|
||||
# CONFIG_I2C_SIS5595 is not set
|
||||
# CONFIG_I2C_SIS630 is not set
|
||||
# CONFIG_I2C_SIS96X is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
# CONFIG_I2C_VIA is not set
|
||||
# CONFIG_I2C_VIAPRO is not set
|
||||
# CONFIG_I2C_VOODOO3 is not set
|
||||
# CONFIG_I2C_PCA_ISA is not set
|
||||
|
||||
#
|
||||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
CONFIG_SENSORS_EEPROM=y
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_RTC8564 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_RTC_X1205_I2C is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ADM1021 is not set
|
||||
# CONFIG_SENSORS_ADM1025 is not set
|
||||
# CONFIG_SENSORS_ADM1026 is not set
|
||||
# CONFIG_SENSORS_ADM1031 is not set
|
||||
# CONFIG_SENSORS_ADM9240 is not set
|
||||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM63 is not set
|
||||
# CONFIG_SENSORS_LM75 is not set
|
||||
# CONFIG_SENSORS_LM77 is not set
|
||||
# CONFIG_SENSORS_LM78 is not set
|
||||
# CONFIG_SENSORS_LM80 is not set
|
||||
# CONFIG_SENSORS_LM83 is not set
|
||||
# CONFIG_SENSORS_LM85 is not set
|
||||
# CONFIG_SENSORS_LM87 is not set
|
||||
# CONFIG_SENSORS_LM90 is not set
|
||||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_SIS5595 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VIA686A is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83792D is not set
|
||||
# CONFIG_SENSORS_W83L785TS is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia Capabilities Port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS_FS is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
# CONFIG_ACORN_PARTITION is not set
|
||||
# CONFIG_OSF_PARTITION is not set
|
||||
# CONFIG_AMIGA_PARTITION is not set
|
||||
# CONFIG_ATARI_PARTITION is not set
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_BSD_DISKLABEL is not set
|
||||
# CONFIG_MINIX_SUBPARTITION is not set
|
||||
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||
# CONFIG_LDM_PARTITION is not set
|
||||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
|
@ -1,976 +0,0 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.14-git13
|
||||
# Thu Nov 10 15:15:03 2005
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
CONFIG_ARCH_IXP2000=y
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
# CONFIG_ARCH_S3C2410 is not set
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
|
||||
#
|
||||
# Intel IXP2400/2800 Implementation Options
|
||||
#
|
||||
|
||||
#
|
||||
# IXP2400/2800 Platforms
|
||||
#
|
||||
# CONFIG_ARCH_ENP2611 is not set
|
||||
# CONFIG_ARCH_IXDP2400 is not set
|
||||
# CONFIG_ARCH_IXDP2800 is not set
|
||||
# CONFIG_ARCH_IXDP2401 is not set
|
||||
CONFIG_ARCH_IXDP2801=y
|
||||
CONFIG_ARCH_IXDP2X01=y
|
||||
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_XSCALE=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
CONFIG_XSCALE_PMU=y
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_LEGACY_PROC=y
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_FPE_NWFPE_XP=y
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_MMAP=y
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_SYN_COOKIES=y
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
|
||||
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
# CONFIG_MTD_CFI_AMDSTD is not set
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_XIP is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
CONFIG_MTD_COMPLEX_MAPPINGS=y
|
||||
# CONFIG_MTD_PHYSMAP is not set
|
||||
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
||||
CONFIG_MTD_IXP2000=y
|
||||
# CONFIG_MTD_PCI is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_PMC551 is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLKMTD is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
|
||||
#
|
||||
# NAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_NAND is not set
|
||||
|
||||
#
|
||||
# OneNAND Flash Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DUMMY=y
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_SMC91X is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
CONFIG_NET_PCI=y
|
||||
# CONFIG_PCNET32 is not set
|
||||
# CONFIG_AMD8111_ETH is not set
|
||||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
CONFIG_CS89x0=y
|
||||
# CONFIG_DGRS is not set
|
||||
CONFIG_EEPRO100=y
|
||||
# CONFIG_E100 is not set
|
||||
# CONFIG_FEALNX is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_8139CP is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
CONFIG_WAN=y
|
||||
# CONFIG_DSCC4 is not set
|
||||
# CONFIG_LANMEDIA is not set
|
||||
# CONFIG_SYNCLINK_SYNCPPP is not set
|
||||
CONFIG_HDLC=y
|
||||
CONFIG_HDLC_RAW=y
|
||||
# CONFIG_HDLC_RAW_ETH is not set
|
||||
CONFIG_HDLC_CISCO=y
|
||||
CONFIG_HDLC_FR=y
|
||||
CONFIG_HDLC_PPP=y
|
||||
|
||||
#
|
||||
# X.25/LAPB support is disabled
|
||||
#
|
||||
# CONFIG_PCI200SYN is not set
|
||||
# CONFIG_WANXL is not set
|
||||
# CONFIG_PC300 is not set
|
||||
# CONFIG_FARSYNC is not set
|
||||
CONFIG_DLCI=y
|
||||
CONFIG_DLCI_COUNT=24
|
||||
CONFIG_DLCI_MAX=8
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=3
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_NOWAYOUT is not set
|
||||
|
||||
#
|
||||
# Watchdog Device Drivers
|
||||
#
|
||||
# CONFIG_SOFT_WATCHDOG is not set
|
||||
CONFIG_IXP2000_WATCHDOG=y
|
||||
|
||||
#
|
||||
# PCI-based Watchdog Cards
|
||||
#
|
||||
# CONFIG_PCIPCWATCHDOG is not set
|
||||
# CONFIG_WDTPCI is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_TELCLOCK is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
|
||||
#
|
||||
# I2C Algorithms
|
||||
#
|
||||
CONFIG_I2C_ALGOBIT=y
|
||||
# CONFIG_I2C_ALGOPCF is not set
|
||||
# CONFIG_I2C_ALGOPCA is not set
|
||||
|
||||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
# CONFIG_I2C_ALI1535 is not set
|
||||
# CONFIG_I2C_ALI1563 is not set
|
||||
# CONFIG_I2C_ALI15X3 is not set
|
||||
# CONFIG_I2C_AMD756 is not set
|
||||
# CONFIG_I2C_AMD8111 is not set
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
CONFIG_I2C_IXP2000=y
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_SCx200_ACB is not set
|
||||
# CONFIG_I2C_SIS5595 is not set
|
||||
# CONFIG_I2C_SIS630 is not set
|
||||
# CONFIG_I2C_SIS96X is not set
|
||||
# CONFIG_I2C_STUB is not set
|
||||
# CONFIG_I2C_VIA is not set
|
||||
# CONFIG_I2C_VIAPRO is not set
|
||||
# CONFIG_I2C_VOODOO3 is not set
|
||||
# CONFIG_I2C_PCA_ISA is not set
|
||||
|
||||
#
|
||||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
CONFIG_SENSORS_EEPROM=y
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_RTC8564 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_RTC_X1205_I2C is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_ADM1021 is not set
|
||||
# CONFIG_SENSORS_ADM1025 is not set
|
||||
# CONFIG_SENSORS_ADM1026 is not set
|
||||
# CONFIG_SENSORS_ADM1031 is not set
|
||||
# CONFIG_SENSORS_ADM9240 is not set
|
||||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM63 is not set
|
||||
# CONFIG_SENSORS_LM75 is not set
|
||||
# CONFIG_SENSORS_LM77 is not set
|
||||
# CONFIG_SENSORS_LM78 is not set
|
||||
# CONFIG_SENSORS_LM80 is not set
|
||||
# CONFIG_SENSORS_LM83 is not set
|
||||
# CONFIG_SENSORS_LM85 is not set
|
||||
# CONFIG_SENSORS_LM87 is not set
|
||||
# CONFIG_SENSORS_LM90 is not set
|
||||
# CONFIG_SENSORS_LM92 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
# CONFIG_SENSORS_SIS5595 is not set
|
||||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VIA686A is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83792D is not set
|
||||
# CONFIG_SENSORS_W83L785TS is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia Capabilities Port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT2_FS_XATTR=y
|
||||
CONFIG_EXT2_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_JFFS_FS is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
# CONFIG_ACORN_PARTITION is not set
|
||||
# CONFIG_OSF_PARTITION is not set
|
||||
# CONFIG_AMIGA_PARTITION is not set
|
||||
# CONFIG_ATARI_PARTITION is not set
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_BSD_DISKLABEL is not set
|
||||
# CONFIG_MINIX_SUBPARTITION is not set
|
||||
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||
# CONFIG_LDM_PARTITION is not set
|
||||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
|
@ -1,11 +1,10 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.14-git13
|
||||
# Thu Nov 10 15:14:13 2005
|
||||
# Linux kernel version: 2.6.16-rc2
|
||||
# Wed Feb 8 04:49:11 2006
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
|
||||
|
@ -29,27 +28,31 @@ CONFIG_BSD_PROCESS_ACCT=y
|
|||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_UID16=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_ALL is not set
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_OBSOLETE_INTERMODULE=y
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
|
@ -104,6 +107,7 @@ CONFIG_ARCH_IXP2000=y
|
|||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
# CONFIG_ARCH_AT91RM9200 is not set
|
||||
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
||||
|
||||
#
|
||||
|
@ -113,12 +117,13 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
|
|||
#
|
||||
# IXP2400/2800 Platforms
|
||||
#
|
||||
# CONFIG_ARCH_ENP2611 is not set
|
||||
CONFIG_ARCH_ENP2611=y
|
||||
CONFIG_ARCH_IXDP2400=y
|
||||
# CONFIG_ARCH_IXDP2800 is not set
|
||||
CONFIG_ARCH_IXDP2800=y
|
||||
CONFIG_ARCH_IXDP2X00=y
|
||||
# CONFIG_ARCH_IXDP2401 is not set
|
||||
# CONFIG_ARCH_IXDP2801 is not set
|
||||
CONFIG_ARCH_IXDP2401=y
|
||||
CONFIG_ARCH_IXDP2801=y
|
||||
CONFIG_ARCH_IXDP2X01=y
|
||||
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
|
||||
|
||||
#
|
||||
|
@ -141,7 +146,6 @@ CONFIG_XSCALE_PMU=y
|
|||
#
|
||||
# Bus support
|
||||
#
|
||||
CONFIG_ISA_DMA_API=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_LEGACY_PROC=y
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
|
@ -156,6 +160,7 @@ CONFIG_PCI_LEGACY_PROC=y
|
|||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
# CONFIG_AEABI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
|
@ -198,6 +203,7 @@ CONFIG_BINFMT_ELF=y
|
|||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_APM is not set
|
||||
|
||||
#
|
||||
# Networking
|
||||
|
@ -243,6 +249,11 @@ CONFIG_TCP_CONG_BIC=y
|
|||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
|
@ -260,7 +271,6 @@ CONFIG_TCP_CONG_BIC=y
|
|||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
|
@ -283,6 +293,11 @@ CONFIG_STANDALONE=y
|
|||
# CONFIG_FW_LOADER is not set
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
|
@ -331,6 +346,7 @@ CONFIG_MTD_CFI_UTIL=y
|
|||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
# CONFIG_MTD_XIP is not set
|
||||
|
||||
#
|
||||
|
@ -466,6 +482,7 @@ CONFIG_NET_PCI=y
|
|||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
CONFIG_CS89x0=y
|
||||
# CONFIG_DGRS is not set
|
||||
CONFIG_EEPRO100=y
|
||||
# CONFIG_E100 is not set
|
||||
|
@ -486,12 +503,14 @@ CONFIG_EEPRO100=y
|
|||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
CONFIG_ENP2611_MSF_NET=y
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SKY2 is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
|
@ -595,7 +614,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
CONFIG_SERIAL_8250_NR_UARTS=3
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
|
@ -603,7 +623,6 @@ CONFIG_SERIAL_8250_NR_UARTS=1
|
|||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
@ -704,6 +723,12 @@ CONFIG_SENSORS_EEPROM=y
|
|||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
|
@ -738,6 +763,7 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_SMSC47M1 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_VIA686A is not set
|
||||
# CONFIG_SENSORS_VT8231 is not set
|
||||
# CONFIG_SENSORS_W83781D is not set
|
||||
# CONFIG_SENSORS_W83792D is not set
|
||||
# CONFIG_SENSORS_W83L785TS is not set
|
||||
|
@ -813,6 +839,7 @@ CONFIG_FS_MBCACHE=y
|
|||
# CONFIG_JFS_FS is not set
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
|
@ -844,6 +871,7 @@ CONFIG_TMPFS=y
|
|||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
|
@ -912,6 +940,7 @@ CONFIG_MSDOS_PARTITION=y
|
|||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_KARMA_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
|
||||
#
|
||||
|
@ -928,12 +957,13 @@ CONFIG_MSDOS_PARTITION=y
|
|||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_DEBUG_SLAB is not set
|
||||
CONFIG_DEBUG_MUTEXES=y
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
|
@ -942,6 +972,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
|
|||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FORCED_INLINING=y
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_DEBUG_WAITQ is not set
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.16-rc2
|
||||
# Mon Feb 6 11:17:23 2006
|
||||
# Linux kernel version: 2.6.16
|
||||
# Mon Mar 20 20:36:02 2006
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_MMU=y
|
||||
|
@ -12,7 +12,6 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
|
@ -87,6 +86,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_EP93XX is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_IOP3XX is not set
|
||||
|
@ -111,6 +111,7 @@ CONFIG_ARCH_S3C2410=y
|
|||
# S3C24XX Implementations
|
||||
#
|
||||
CONFIG_MACH_ANUBIS=y
|
||||
CONFIG_MACH_OSIRIS=y
|
||||
CONFIG_ARCH_BAST=y
|
||||
CONFIG_BAST_PC104_IRQ=y
|
||||
CONFIG_ARCH_H1940=y
|
||||
|
@ -175,6 +176,7 @@ CONFIG_ISA=y
|
|||
#
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
CONFIG_HZ=200
|
||||
# CONFIG_AEABI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
|
@ -230,6 +232,7 @@ CONFIG_NET=y
|
|||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
# CONFIG_PACKET is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
|
@ -364,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y
|
|||
CONFIG_MTD_ROM=y
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
||||
# CONFIG_MTD_XIP is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
|
@ -431,6 +433,7 @@ CONFIG_PARPORT_1284=y
|
|||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
CONFIG_BLK_DEV_NBD=m
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
|
@ -623,7 +626,6 @@ CONFIG_SERIAL_NONSTANDARD=y
|
|||
# CONFIG_MOXA_SMARTIO is not set
|
||||
# CONFIG_ISI is not set
|
||||
# CONFIG_SYNCLINKMP is not set
|
||||
# CONFIG_SYNCLINK_GT is not set
|
||||
# CONFIG_N_HDLC is not set
|
||||
# CONFIG_RISCOM8 is not set
|
||||
# CONFIG_SPECIALIX is not set
|
||||
|
@ -686,6 +688,11 @@ CONFIG_S3C2410_WATCHDOG=y
|
|||
# CONFIG_PCWATCHDOG is not set
|
||||
# CONFIG_MIXCOMWD is not set
|
||||
# CONFIG_WDT is not set
|
||||
|
||||
#
|
||||
# USB-based Watchdog Cards
|
||||
#
|
||||
# CONFIG_USBPCWATCHDOG is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_RTC is not set
|
||||
CONFIG_S3C2410_RTC=y
|
||||
|
@ -750,6 +757,11 @@ CONFIG_SENSORS_EEPROM=m
|
|||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
|
@ -763,6 +775,7 @@ CONFIG_HWMON_VID=m
|
|||
# CONFIG_SENSORS_ASB100 is not set
|
||||
# CONFIG_SENSORS_ATXP1 is not set
|
||||
# CONFIG_SENSORS_DS1621 is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_SENSORS_FSCHER is not set
|
||||
# CONFIG_SENSORS_FSCPOS is not set
|
||||
# CONFIG_SENSORS_GL518SM is not set
|
||||
|
@ -850,16 +863,138 @@ CONFIG_FONT_8x16=y
|
|||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEBUG is not set
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_BANDWIDTH is not set
|
||||
# CONFIG_USB_DYNAMIC_MINORS is not set
|
||||
# CONFIG_USB_SUSPEND is not set
|
||||
# CONFIG_USB_OTG is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_ACM is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
# CONFIG_USB_STORAGE is not set
|
||||
# CONFIG_USB_LIBUSUAL is not set
|
||||
|
||||
#
|
||||
# USB Input Devices
|
||||
#
|
||||
# CONFIG_USB_HID is not set
|
||||
|
||||
#
|
||||
# USB HID Boot Protocol drivers
|
||||
#
|
||||
# CONFIG_USB_KBD is not set
|
||||
# CONFIG_USB_MOUSE is not set
|
||||
# CONFIG_USB_AIPTEK is not set
|
||||
# CONFIG_USB_WACOM is not set
|
||||
# CONFIG_USB_ACECAD is not set
|
||||
# CONFIG_USB_KBTAB is not set
|
||||
# CONFIG_USB_POWERMATE is not set
|
||||
# CONFIG_USB_MTOUCH is not set
|
||||
# CONFIG_USB_ITMTOUCH is not set
|
||||
# CONFIG_USB_EGALAX is not set
|
||||
# CONFIG_USB_YEALINK is not set
|
||||
# CONFIG_USB_XPAD is not set
|
||||
# CONFIG_USB_ATI_REMOTE is not set
|
||||
# CONFIG_USB_ATI_REMOTE2 is not set
|
||||
# CONFIG_USB_KEYSPAN_REMOTE is not set
|
||||
# CONFIG_USB_APPLETOUCH is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
|
||||
#
|
||||
# USB Multimedia devices
|
||||
#
|
||||
# CONFIG_USB_DABUSB is not set
|
||||
|
||||
#
|
||||
# Video4Linux support is needed for USB Multimedia device support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Network Adapters
|
||||
#
|
||||
# CONFIG_USB_CATC is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
# CONFIG_USB_RTL8150 is not set
|
||||
# CONFIG_USB_USBNET is not set
|
||||
CONFIG_USB_MON=y
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
# CONFIG_USB_USS720 is not set
|
||||
|
||||
#
|
||||
# USB Serial Converter support
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_AUERSWALD is not set
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_LEGOTOWER is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGETKIT is not set
|
||||
# CONFIG_USB_PHIDGETSERVO is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_LD is not set
|
||||
# CONFIG_USB_TEST is not set
|
||||
|
||||
#
|
||||
# USB DSL modem support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
# CONFIG_USB_GADGET_NET2280 is not set
|
||||
# CONFIG_USB_GADGET_PXA2XX is not set
|
||||
# CONFIG_USB_GADGET_GOKU is not set
|
||||
# CONFIG_USB_GADGET_LH7A40X is not set
|
||||
# CONFIG_USB_GADGET_OMAP is not set
|
||||
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
||||
# CONFIG_USB_ZERO is not set
|
||||
# CONFIG_USB_ETH is not set
|
||||
# CONFIG_USB_GADGETFS is not set
|
||||
# CONFIG_USB_FILE_STORAGE is not set
|
||||
# CONFIG_USB_G_SERIAL is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
|
|
|
@ -357,10 +357,8 @@ static int apm_open(struct inode * inode, struct file * filp)
|
|||
{
|
||||
struct apm_user *as;
|
||||
|
||||
as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
|
||||
as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
|
||||
if (as) {
|
||||
memset(as, 0, sizeof(*as));
|
||||
|
||||
/*
|
||||
* XXX - this is a tiny bit broken, when we consider BSD
|
||||
* process accounting. If the device is opened by root, we
|
||||
|
|
|
@ -540,12 +540,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
|
|||
int nr, busnr;
|
||||
|
||||
for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
|
||||
sys = kmalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
|
||||
sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
|
||||
if (!sys)
|
||||
panic("PCI: unable to allocate sys data!");
|
||||
|
||||
memset(sys, 0, sizeof(struct pci_sys_data));
|
||||
|
||||
sys->hw = hw;
|
||||
sys->busnr = busnr;
|
||||
sys->swizzle = hw->swizzle;
|
||||
|
|
|
@ -11,7 +11,6 @@
|
|||
*/
|
||||
#include <linux/config.h>
|
||||
#include <linux/linkage.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
.text
|
||||
|
||||
|
|
|
@ -807,14 +807,12 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
|
|||
unsigned long base;
|
||||
int i;
|
||||
|
||||
ec = kmalloc(sizeof(ecard_t), GFP_KERNEL);
|
||||
ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
|
||||
if (!ec) {
|
||||
ec = ERR_PTR(-ENOMEM);
|
||||
goto nomem;
|
||||
}
|
||||
|
||||
memset(ec, 0, sizeof(ecard_t));
|
||||
|
||||
ec->slot_no = slot;
|
||||
ec->type = type;
|
||||
ec->irq = NO_IRQ;
|
||||
|
|
|
@ -484,7 +484,6 @@ call_fpe:
|
|||
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
|
||||
bcs iwmmxt_task_enable
|
||||
#endif
|
||||
enable_irq
|
||||
add pc, pc, r8, lsr #6
|
||||
mov r0, r0
|
||||
|
||||
|
@ -511,6 +510,7 @@ call_fpe:
|
|||
mov pc, lr @ CP#15 (Control)
|
||||
|
||||
do_fpe:
|
||||
enable_irq
|
||||
ldr r4, .LCfp
|
||||
add r10, r10, #TI_FPSTATE @ r10 = workspace
|
||||
ldr pc, [r4] @ Call FP module USR entry point
|
||||
|
|
|
@ -28,10 +28,9 @@
|
|||
#define PROCINFO_INITFUNC 12
|
||||
|
||||
#define MACHINFO_TYPE 0
|
||||
#define MACHINFO_PHYSRAM 4
|
||||
#define MACHINFO_PHYSIO 8
|
||||
#define MACHINFO_PGOFFIO 12
|
||||
#define MACHINFO_NAME 16
|
||||
#define MACHINFO_PHYSIO 4
|
||||
#define MACHINFO_PGOFFIO 8
|
||||
#define MACHINFO_NAME 12
|
||||
|
||||
#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
|
||||
|
||||
|
|
|
@ -305,14 +305,19 @@ report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int
|
|||
static int count = 100;
|
||||
struct irqaction *action;
|
||||
|
||||
if (!count || noirqdebug)
|
||||
if (noirqdebug)
|
||||
return;
|
||||
|
||||
count--;
|
||||
|
||||
if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
|
||||
if (!count)
|
||||
return;
|
||||
count--;
|
||||
printk("irq%u: bogus retval mask %x\n", irq, ret);
|
||||
} else {
|
||||
desc->irqs_unhandled++;
|
||||
if (desc->irqs_unhandled <= 99900)
|
||||
return;
|
||||
desc->irqs_unhandled = 0;
|
||||
printk("irq%u: nobody cared\n", irq);
|
||||
}
|
||||
show_regs(regs);
|
||||
|
|
|
@ -9,28 +9,32 @@
|
|||
*/
|
||||
#include <linux/linkage.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <asm/param.h>
|
||||
.text
|
||||
|
||||
.LC0: .word loops_per_jiffy
|
||||
.LC1: .word (2199023*HZ)>>11
|
||||
|
||||
/*
|
||||
* 0 <= r0 <= 2000
|
||||
* r0 <= 2000
|
||||
* lpj <= 0x01ffffff (max. 3355 bogomips)
|
||||
* HZ <= 1000
|
||||
*/
|
||||
|
||||
ENTRY(__udelay)
|
||||
mov r2, #0x6800
|
||||
orr r2, r2, #0x00db
|
||||
ldr r2, .LC1
|
||||
mul r0, r2, r0
|
||||
ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
|
||||
ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
|
||||
ldr r2, .LC0
|
||||
ldr r2, [r2] @ max = 0x0fffffff
|
||||
mov r0, r0, lsr #11 @ max = 0x00003fff
|
||||
mov r2, r2, lsr #11 @ max = 0x0003ffff
|
||||
ldr r2, [r2] @ max = 0x01ffffff
|
||||
mov r0, r0, lsr #14 @ max = 0x0001ffff
|
||||
mov r2, r2, lsr #10 @ max = 0x00007fff
|
||||
mul r0, r2, r0 @ max = 2^32-1
|
||||
movs r0, r0, lsr #6
|
||||
RETINSTR(moveq,pc,lr)
|
||||
|
||||
/*
|
||||
* loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32
|
||||
* loops = r0 * HZ * loops_per_jiffy / 1000000
|
||||
*
|
||||
* Oh, if only we had a cycle counter...
|
||||
*/
|
||||
|
|
|
@ -12,7 +12,6 @@
|
|||
*/
|
||||
#include <linux/linkage.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
.text
|
||||
.align
|
||||
|
|
|
@ -201,6 +201,54 @@ static struct clk ohci_clk = {
|
|||
.pmc_mask = 1 << AT91_ID_UHP,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk ether_clk = {
|
||||
.name = "ether_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_EMAC,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk mmc_clk = {
|
||||
.name = "mci_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_MCI,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk twi_clk = {
|
||||
.name = "twi_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_TWI,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk usart0_clk = {
|
||||
.name = "usart0_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_US0,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk usart1_clk = {
|
||||
.name = "usart1_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_US1,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk usart2_clk = {
|
||||
.name = "usart2_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_US2,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk usart3_clk = {
|
||||
.name = "usart3_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_US3,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
static struct clk spi_clk = {
|
||||
.name = "spi0_clk",
|
||||
.parent = &mck,
|
||||
.pmc_mask = 1 << AT91_ID_SPI,
|
||||
.mode = pmc_periph_mode,
|
||||
};
|
||||
|
||||
static struct clk *const clock_list[] = {
|
||||
/* four primary clocks -- MUST BE FIRST! */
|
||||
|
@ -223,15 +271,18 @@ static struct clk *const clock_list[] = {
|
|||
|
||||
/* MCK and peripherals */
|
||||
&mck,
|
||||
// usart0..usart3
|
||||
// mmc
|
||||
&usart0_clk,
|
||||
&usart1_clk,
|
||||
&usart2_clk,
|
||||
&usart3_clk,
|
||||
&mmc_clk,
|
||||
&udc_clk,
|
||||
// i2c
|
||||
// spi
|
||||
&twi_clk,
|
||||
&spi_clk,
|
||||
// ssc0..ssc2
|
||||
// tc0..tc5
|
||||
&ohci_clk,
|
||||
// ether
|
||||
ðer_clk,
|
||||
};
|
||||
|
||||
|
||||
|
@ -360,7 +411,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
|
|||
u32 pckr;
|
||||
|
||||
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
|
||||
pckr &= 0x03;
|
||||
pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
|
||||
pckr |= prescale << 2;
|
||||
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
|
||||
clk->rate_hz = actual;
|
||||
|
@ -440,7 +491,7 @@ static int at91_clk_show(struct seq_file *s, void *unused)
|
|||
else
|
||||
state = "";
|
||||
|
||||
seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n",
|
||||
seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
|
||||
clk->name, clk->users, state, clk_get_rate(clk),
|
||||
clk->parent ? clk->parent->name : "");
|
||||
}
|
||||
|
@ -483,11 +534,18 @@ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
|
|||
freq *= mul + 1;
|
||||
} else
|
||||
freq = 0;
|
||||
if (pll == &pllb && (reg & (1 << 28)))
|
||||
freq /= 2;
|
||||
|
||||
return freq;
|
||||
}
|
||||
|
||||
static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
|
||||
{
|
||||
if (pll == &pllb && (reg & AT91_PMC_USB96M))
|
||||
return freq / 2;
|
||||
else
|
||||
return freq;
|
||||
}
|
||||
|
||||
static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
|
||||
{
|
||||
unsigned i, div = 0, mul = 0, diff = 1 << 30;
|
||||
|
@ -550,8 +608,8 @@ int __init at91_clock_init(unsigned long main_clock)
|
|||
if (!main_clock) {
|
||||
do {
|
||||
tmp = at91_sys_read(AT91_CKGR_MCFR);
|
||||
} while (!(tmp & 0x10000));
|
||||
main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16);
|
||||
} while (!(tmp & AT91_PMC_MAINRDY));
|
||||
main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
|
||||
}
|
||||
main_clk.rate_hz = main_clock;
|
||||
|
||||
|
@ -566,13 +624,16 @@ int __init at91_clock_init(unsigned long main_clock)
|
|||
*
|
||||
* REVISIT: assumes MCK doesn't derive from PLLB!
|
||||
*/
|
||||
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000;
|
||||
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
|
||||
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
|
||||
at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP));
|
||||
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
|
||||
at91_sys_write(AT91_CKGR_PLLBR, 0);
|
||||
at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
|
||||
|
||||
udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
|
||||
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
|
||||
|
||||
/*
|
||||
* MCK and CPU derive from one of those primary clocks.
|
||||
* For now, assume this parentage won't change.
|
||||
|
|
|
@ -261,7 +261,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
|
|||
void __iomem *pio;
|
||||
u32 isr;
|
||||
|
||||
pio = (void __force __iomem *) desc->chipdata;
|
||||
pio = desc->base;
|
||||
|
||||
/* temporarily mask (level sensitive) parent IRQ */
|
||||
desc->chip->ack(irq);
|
||||
|
@ -312,7 +312,7 @@ void __init at91_gpio_irq_setup(unsigned banks)
|
|||
__raw_writel(~0, controller + PIO_IDR);
|
||||
|
||||
set_irq_data(id, (void *) pin);
|
||||
set_irq_chipdata(id, (void __force *) controller);
|
||||
set_irq_chipdata(id, controller);
|
||||
|
||||
for (i = 0; i < 32; i++, pin++) {
|
||||
set_irq_chip(pin, &gpio_irqchip);
|
||||
|
|
|
@ -71,11 +71,11 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r
|
|||
if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
|
||||
write_seqlock(&xtime_lock);
|
||||
|
||||
do {
|
||||
while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) {
|
||||
timer_tick(regs);
|
||||
rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV;
|
||||
at91_sys_write(AT91_ST_RTAR, rtar);
|
||||
} while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH);
|
||||
}
|
||||
|
||||
write_sequnlock(&xtime_lock);
|
||||
|
||||
|
|
21
arch/arm/mach-ep93xx/Kconfig
Normal file
21
arch/arm/mach-ep93xx/Kconfig
Normal file
|
@ -0,0 +1,21 @@
|
|||
if ARCH_EP93XX
|
||||
|
||||
menu "Cirrus EP93xx Implementation Options"
|
||||
|
||||
comment "EP93xx Platforms"
|
||||
|
||||
config MACH_GESBC9312
|
||||
bool "Support Glomation GESBC-9312-sx"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the Glomation
|
||||
GESBC-9312-sx board.
|
||||
|
||||
config MACH_TS72XX
|
||||
bool "Support Technologic Systems TS-72xx SBC"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
Technologic Systems TS-72xx board.
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
10
arch/arm/mach-ep93xx/Makefile
Normal file
10
arch/arm/mach-ep93xx/Makefile
Normal file
|
@ -0,0 +1,10 @@
|
|||
#
|
||||
# Makefile for the linux kernel.
|
||||
#
|
||||
obj-y := core.o
|
||||
obj-m :=
|
||||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
|
||||
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
|
2
arch/arm/mach-ep93xx/Makefile.boot
Normal file
2
arch/arm/mach-ep93xx/Makefile.boot
Normal file
|
@ -0,0 +1,2 @@
|
|||
zreladdr-y := 0x00008000
|
||||
params_phys-y := 0x00000100
|
374
arch/arm/mach-ep93xx/core.c
Normal file
374
arch/arm/mach-ep93xx/core.c
Normal file
|
@ -0,0 +1,374 @@
|
|||
/*
|
||||
* arch/arm/mach-ep93xx/core.c
|
||||
* Core routines for Cirrus EP93xx chips.
|
||||
*
|
||||
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
||||
*
|
||||
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
|
||||
* role in the ep93xx linux community.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/amba/bus.h>
|
||||
|
||||
#include <asm/types.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/tlbflush.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include <asm/hardware/vic.h>
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* Static I/O mappings that are needed for all EP93xx platforms
|
||||
*************************************************************************/
|
||||
static struct map_desc ep93xx_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = EP93XX_AHB_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
|
||||
.length = EP93XX_AHB_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = EP93XX_APB_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
|
||||
.length = EP93XX_APB_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
},
|
||||
};
|
||||
|
||||
void __init ep93xx_map_io(void)
|
||||
{
|
||||
iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* Timer handling for EP93xx
|
||||
*************************************************************************
|
||||
* The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
|
||||
* 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
|
||||
* an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
|
||||
* is free-running, and can't generate interrupts.
|
||||
*
|
||||
* The 508 kHz timers are ideal for use for the timer interrupt, as the
|
||||
* most common values of HZ divide 508 kHz nicely. We pick one of the 16
|
||||
* bit timers (timer 1) since we don't need more than 16 bits of reload
|
||||
* value as long as HZ >= 8.
|
||||
*
|
||||
* The higher clock rate of timer 4 makes it a better choice than the
|
||||
* other timers for use in gettimeoffset(), while the fact that it can't
|
||||
* generate interrupts means we don't have to worry about not being able
|
||||
* to use this timer for something else. We also use timer 4 for keeping
|
||||
* track of lost jiffies.
|
||||
*/
|
||||
static unsigned int last_jiffy_time;
|
||||
|
||||
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
|
||||
|
||||
static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
||||
{
|
||||
write_seqlock(&xtime_lock);
|
||||
|
||||
__raw_writel(1, EP93XX_TIMER1_CLEAR);
|
||||
while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time
|
||||
>= TIMER4_TICKS_PER_JIFFY) {
|
||||
last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
|
||||
timer_tick(regs);
|
||||
}
|
||||
|
||||
write_sequnlock(&xtime_lock);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct irqaction ep93xx_timer_irq = {
|
||||
.name = "ep93xx timer",
|
||||
.flags = SA_INTERRUPT | SA_TIMER,
|
||||
.handler = ep93xx_timer_interrupt,
|
||||
};
|
||||
|
||||
static void __init ep93xx_timer_init(void)
|
||||
{
|
||||
/* Enable periodic HZ timer. */
|
||||
__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
|
||||
__raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD);
|
||||
__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
|
||||
|
||||
/* Enable lost jiffy timer. */
|
||||
__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
|
||||
|
||||
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
|
||||
}
|
||||
|
||||
static unsigned long ep93xx_gettimeoffset(void)
|
||||
{
|
||||
int offset;
|
||||
|
||||
offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
|
||||
|
||||
/* Calculate (1000000 / 983040) * offset. */
|
||||
return offset + (53 * offset / 3072);
|
||||
}
|
||||
|
||||
struct sys_timer ep93xx_timer = {
|
||||
.init = ep93xx_timer_init,
|
||||
.offset = ep93xx_gettimeoffset,
|
||||
};
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* GPIO handling for EP93xx
|
||||
*************************************************************************/
|
||||
static unsigned char gpio_int_enable[2];
|
||||
static unsigned char gpio_int_type1[2];
|
||||
static unsigned char gpio_int_type2[2];
|
||||
|
||||
static void update_gpio_ab_int_params(int port)
|
||||
{
|
||||
if (port == 0) {
|
||||
__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
|
||||
__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
|
||||
__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
|
||||
__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
|
||||
} else if (port == 1) {
|
||||
__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
|
||||
__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
|
||||
__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
|
||||
__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static unsigned char data_register_offset[8] = {
|
||||
0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
|
||||
};
|
||||
|
||||
static unsigned char data_direction_register_offset[8] = {
|
||||
0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
|
||||
};
|
||||
|
||||
void gpio_line_config(int line, int direction)
|
||||
{
|
||||
unsigned int data_direction_register;
|
||||
unsigned long flags;
|
||||
unsigned char v;
|
||||
|
||||
data_direction_register =
|
||||
EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
|
||||
|
||||
local_irq_save(flags);
|
||||
if (direction == GPIO_OUT) {
|
||||
if (line >= 0 && line < 16) {
|
||||
gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
|
||||
update_gpio_ab_int_params(line >> 3);
|
||||
}
|
||||
|
||||
v = __raw_readb(data_direction_register);
|
||||
v |= 1 << (line & 7);
|
||||
__raw_writeb(v, data_direction_register);
|
||||
} else if (direction == GPIO_IN) {
|
||||
v = __raw_readb(data_direction_register);
|
||||
v &= ~(1 << (line & 7));
|
||||
__raw_writeb(v, data_direction_register);
|
||||
}
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
EXPORT_SYMBOL(gpio_line_config);
|
||||
|
||||
int gpio_line_get(int line)
|
||||
{
|
||||
unsigned int data_register;
|
||||
|
||||
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
|
||||
|
||||
return !!(__raw_readb(data_register) & (1 << (line & 7)));
|
||||
}
|
||||
EXPORT_SYMBOL(gpio_line_get);
|
||||
|
||||
void gpio_line_set(int line, int value)
|
||||
{
|
||||
unsigned int data_register;
|
||||
unsigned long flags;
|
||||
unsigned char v;
|
||||
|
||||
data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
|
||||
|
||||
local_irq_save(flags);
|
||||
if (value == EP93XX_GPIO_HIGH) {
|
||||
v = __raw_readb(data_register);
|
||||
v |= 1 << (line & 7);
|
||||
__raw_writeb(v, data_register);
|
||||
} else if (value == EP93XX_GPIO_LOW) {
|
||||
v = __raw_readb(data_register);
|
||||
v &= ~(1 << (line & 7));
|
||||
__raw_writeb(v, data_register);
|
||||
}
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
EXPORT_SYMBOL(gpio_line_set);
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* EP93xx IRQ handling
|
||||
*************************************************************************/
|
||||
static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
|
||||
struct irqdesc *desc, struct pt_regs *regs)
|
||||
{
|
||||
unsigned char status;
|
||||
int i;
|
||||
|
||||
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (status & (1 << i)) {
|
||||
desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
|
||||
desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs);
|
||||
}
|
||||
}
|
||||
|
||||
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (status & (1 << i)) {
|
||||
desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
|
||||
desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
|
||||
{
|
||||
int line = irq - IRQ_EP93XX_GPIO(0);
|
||||
int port = line >> 3;
|
||||
|
||||
gpio_int_enable[port] &= ~(1 << (line & 7));
|
||||
update_gpio_ab_int_params(port);
|
||||
|
||||
if (line >> 3) {
|
||||
__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
|
||||
} else {
|
||||
__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
|
||||
}
|
||||
}
|
||||
|
||||
static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
|
||||
{
|
||||
int line = irq - IRQ_EP93XX_GPIO(0);
|
||||
int port = line >> 3;
|
||||
|
||||
gpio_int_enable[port] &= ~(1 << (line & 7));
|
||||
update_gpio_ab_int_params(port);
|
||||
}
|
||||
|
||||
static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
|
||||
{
|
||||
int line = irq - IRQ_EP93XX_GPIO(0);
|
||||
int port = line >> 3;
|
||||
|
||||
gpio_int_enable[port] |= 1 << (line & 7);
|
||||
update_gpio_ab_int_params(port);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* gpio_int_type1 controls whether the interrupt is level (0) or
|
||||
* edge (1) triggered, while gpio_int_type2 controls whether it
|
||||
* triggers on low/falling (0) or high/rising (1).
|
||||
*/
|
||||
static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
|
||||
{
|
||||
int port;
|
||||
int line;
|
||||
|
||||
line = irq - IRQ_EP93XX_GPIO(0);
|
||||
gpio_line_config(line, GPIO_IN);
|
||||
|
||||
port = line >> 3;
|
||||
line &= 7;
|
||||
|
||||
if (type & IRQT_RISING) {
|
||||
gpio_int_type1[port] |= 1 << line;
|
||||
gpio_int_type2[port] |= 1 << line;
|
||||
} else if (type & IRQT_FALLING) {
|
||||
gpio_int_type1[port] |= 1 << line;
|
||||
gpio_int_type2[port] &= ~(1 << line);
|
||||
} else if (type & IRQT_HIGH) {
|
||||
gpio_int_type1[port] &= ~(1 << line);
|
||||
gpio_int_type2[port] |= 1 << line;
|
||||
} else if (type & IRQT_LOW) {
|
||||
gpio_int_type1[port] &= ~(1 << line);
|
||||
gpio_int_type2[port] &= ~(1 << line);
|
||||
}
|
||||
update_gpio_ab_int_params(port);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irqchip ep93xx_gpio_ab_irq_chip = {
|
||||
.ack = ep93xx_gpio_ab_irq_mask_ack,
|
||||
.mask = ep93xx_gpio_ab_irq_mask,
|
||||
.unmask = ep93xx_gpio_ab_irq_unmask,
|
||||
.set_type = ep93xx_gpio_ab_irq_type,
|
||||
};
|
||||
|
||||
|
||||
void __init ep93xx_init_irq(void)
|
||||
{
|
||||
int irq;
|
||||
|
||||
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
|
||||
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
|
||||
|
||||
for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
|
||||
set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
|
||||
set_irq_handler(irq, do_level_IRQ);
|
||||
set_irq_flags(irq, IRQF_VALID);
|
||||
}
|
||||
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
|
||||
}
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* EP93xx peripheral handling
|
||||
*************************************************************************/
|
||||
void __init ep93xx_init_devices(void)
|
||||
{
|
||||
unsigned int v;
|
||||
|
||||
/*
|
||||
* Disallow access to MaverickCrunch initially.
|
||||
*/
|
||||
v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
|
||||
v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
|
||||
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
|
||||
__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
|
||||
}
|
40
arch/arm/mach-ep93xx/gesbc9312.c
Normal file
40
arch/arm/mach-ep93xx/gesbc9312.c
Normal file
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
* arch/arm/mach-ep93xx/gesbc9312.c
|
||||
* Glomation GESBC-9312-sx support.
|
||||
*
|
||||
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
static void __init gesbc9312_init_machine(void)
|
||||
{
|
||||
ep93xx_init_devices();
|
||||
physmap_configure(0x60000000, 0x00800000, 4, NULL);
|
||||
}
|
||||
|
||||
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
|
||||
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
|
||||
.phys_io = EP93XX_APB_PHYS_BASE,
|
||||
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.map_io = ep93xx_map_io,
|
||||
.init_irq = ep93xx_init_irq,
|
||||
.timer = &ep93xx_timer,
|
||||
.init_machine = gesbc9312_init_machine,
|
||||
MACHINE_END
|
118
arch/arm/mach-ep93xx/ts72xx.c
Normal file
118
arch/arm/mach-ep93xx/ts72xx.c
Normal file
|
@ -0,0 +1,118 @@
|
|||
/*
|
||||
* arch/arm/mach-ep93xx/ts72xx.c
|
||||
* Technologic Systems TS72xx SBC support.
|
||||
*
|
||||
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
static struct map_desc ts72xx_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = TS72XX_MODEL_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
|
||||
.length = TS72XX_MODEL_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = TS72XX_OPTIONS_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
|
||||
.length = TS72XX_OPTIONS_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = TS72XX_OPTIONS2_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
|
||||
.length = TS72XX_OPTIONS2_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}
|
||||
};
|
||||
|
||||
static struct map_desc ts72xx_nand_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = TS72XX_NAND_DATA_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE),
|
||||
.length = TS72XX_NAND_DATA_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = TS72XX_NAND_CONTROL_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE),
|
||||
.length = TS72XX_NAND_CONTROL_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = TS72XX_NAND_BUSY_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE),
|
||||
.length = TS72XX_NAND_BUSY_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}
|
||||
};
|
||||
|
||||
static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = TS72XX_NAND_DATA_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE),
|
||||
.length = TS72XX_NAND_DATA_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = TS72XX_NAND_CONTROL_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE),
|
||||
.length = TS72XX_NAND_CONTROL_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = TS72XX_NAND_BUSY_VIRT_BASE,
|
||||
.pfn = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE),
|
||||
.length = TS72XX_NAND_BUSY_SIZE,
|
||||
.type = MT_DEVICE,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init ts72xx_map_io(void)
|
||||
{
|
||||
ep93xx_map_io();
|
||||
iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
|
||||
|
||||
/*
|
||||
* The TS-7200 has NOR flash, the other models have NAND flash.
|
||||
*/
|
||||
if (!board_is_ts7200()) {
|
||||
if (is_ts9420_installed()) {
|
||||
iotable_init(ts72xx_alternate_nand_io_desc,
|
||||
ARRAY_SIZE(ts72xx_alternate_nand_io_desc));
|
||||
} else {
|
||||
iotable_init(ts72xx_nand_io_desc,
|
||||
ARRAY_SIZE(ts72xx_nand_io_desc));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void __init ts72xx_init_machine(void)
|
||||
{
|
||||
ep93xx_init_devices();
|
||||
if (board_is_ts7200())
|
||||
physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL);
|
||||
}
|
||||
|
||||
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
|
||||
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
|
||||
.phys_io = EP93XX_APB_PHYS_BASE,
|
||||
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.map_io = ts72xx_map_io,
|
||||
.init_irq = ep93xx_init_irq,
|
||||
.timer = &ep93xx_timer,
|
||||
.init_machine = ts72xx_init_machine,
|
||||
MACHINE_END
|
|
@ -255,14 +255,12 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
|
|||
if (nr || !footbridge_cfn_mode())
|
||||
return 0;
|
||||
|
||||
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
if (!res) {
|
||||
printk("out of memory for root bus resources");
|
||||
return 0;
|
||||
}
|
||||
|
||||
memset(res, 0, sizeof(struct resource) * 2);
|
||||
|
||||
res[0].flags = IORESOURCE_MEM;
|
||||
res[0].name = "Footbridge non-prefetch";
|
||||
res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
|
||||
|
|
|
@ -355,12 +355,11 @@ static int impd1_probe(struct lm_device *dev)
|
|||
if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
|
||||
return -EBUSY;
|
||||
|
||||
impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL);
|
||||
impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
|
||||
if (!impd1) {
|
||||
ret = -ENOMEM;
|
||||
goto release_lm;
|
||||
}
|
||||
memset(impd1, 0, sizeof(struct impd1_module));
|
||||
|
||||
impd1->base = ioremap(dev->resource.start, SZ_4K);
|
||||
if (!impd1->base) {
|
||||
|
@ -389,12 +388,10 @@ static int impd1_probe(struct lm_device *dev)
|
|||
|
||||
pc_base = dev->resource.start + idev->offset;
|
||||
|
||||
d = kmalloc(sizeof(struct amba_device), GFP_KERNEL);
|
||||
d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
|
||||
if (!d)
|
||||
continue;
|
||||
|
||||
memset(d, 0, sizeof(struct amba_device));
|
||||
|
||||
snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
|
||||
"lm%x:%5.5lx", dev->id, idev->offset >> 12);
|
||||
|
||||
|
|
|
@ -319,12 +319,10 @@ static void __init ap_init(void)
|
|||
if ((sc_dec & (16 << i)) == 0)
|
||||
continue;
|
||||
|
||||
lmdev = kmalloc(sizeof(struct lm_device), GFP_KERNEL);
|
||||
lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
|
||||
if (!lmdev)
|
||||
continue;
|
||||
|
||||
memset(lmdev, 0, sizeof(struct lm_device));
|
||||
|
||||
lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
|
||||
lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
|
||||
lmdev->resource.flags = IORESOURCE_MEM;
|
||||
|
|
|
@ -74,12 +74,10 @@ static int iq31244_setup(int nr, struct pci_sys_data *sys)
|
|||
if(nr != 0)
|
||||
return 0;
|
||||
|
||||
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
if (!res)
|
||||
panic("PCI: unable to alloc resources");
|
||||
|
||||
memset(res, 0, sizeof(struct resource) * 2);
|
||||
|
||||
res[0].start = IOP321_PCI_LOWER_IO_VA;
|
||||
res[0].end = IOP321_PCI_UPPER_IO_VA;
|
||||
res[0].name = "IQ31244 PCI I/O Space";
|
||||
|
|
|
@ -68,12 +68,10 @@ static int iq80321_setup(int nr, struct pci_sys_data *sys)
|
|||
if(nr != 0)
|
||||
return 0;
|
||||
|
||||
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
if (!res)
|
||||
panic("PCI: unable to alloc resources");
|
||||
|
||||
memset(res, 0, sizeof(struct resource) * 2);
|
||||
|
||||
res[0].start = IOP321_PCI_LOWER_IO_VA;
|
||||
res[0].end = IOP321_PCI_UPPER_IO_VA;
|
||||
res[0].name = "IQ80321 PCI I/O Space";
|
||||
|
|
|
@ -64,12 +64,10 @@ static int iq80331_setup(int nr, struct pci_sys_data *sys)
|
|||
if(nr != 0)
|
||||
return 0;
|
||||
|
||||
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
if (!res)
|
||||
panic("PCI: unable to alloc resources");
|
||||
|
||||
memset(res, 0, sizeof(struct resource) * 2);
|
||||
|
||||
res[0].start = IOP331_PCI_LOWER_IO_VA;
|
||||
res[0].end = IOP331_PCI_UPPER_IO_VA;
|
||||
res[0].name = "IQ80331 PCI I/O Space";
|
||||
|
|
|
@ -70,12 +70,10 @@ static int iq80332_setup(int nr, struct pci_sys_data *sys)
|
|||
if(nr != 0)
|
||||
return 0;
|
||||
|
||||
res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
|
||||
if (!res)
|
||||
panic("PCI: unable to alloc resources");
|
||||
|
||||
memset(res, 0, sizeof(struct resource) * 2);
|
||||
|
||||
res[0].start = IOP331_PCI_LOWER_IO_VA;
|
||||
res[0].end = IOP331_PCI_UPPER_IO_VA;
|
||||
res[0].name = "IQ80332 PCI I/O Space";
|
||||
|
|
|
@ -43,12 +43,17 @@ config ARCH_IXDP2401
|
|||
this platform, see <file:Documentation/arm/IXP2000>.
|
||||
|
||||
config ARCH_IXDP2801
|
||||
bool "Support Intel IXDP2801"
|
||||
bool "Support Intel IXDP2801 and IXDP28x5"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the Intel
|
||||
IXDP2801 reference platform. For more information on
|
||||
IXDP2801/2805/2855 reference platforms. For more information on
|
||||
this platform, see <file:Documentation/arm/IXP2000>.
|
||||
|
||||
config MACH_IXDP28X5
|
||||
bool
|
||||
depends on ARCH_IXDP2801
|
||||
default y
|
||||
|
||||
config ARCH_IXDP2X01
|
||||
bool
|
||||
depends on ARCH_IXDP2401 || ARCH_IXDP2801
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Makefile for the linux kernel.
|
||||
#
|
||||
obj-y := core.o pci.o uengine.o
|
||||
obj-y := core.o pci.o
|
||||
obj-m :=
|
||||
obj-n :=
|
||||
obj- :=
|
||||
|
|
|
@ -288,8 +288,6 @@ void gpio_line_config(int line, int direction)
|
|||
|
||||
local_irq_save(flags);
|
||||
if (direction == GPIO_OUT) {
|
||||
irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
|
||||
|
||||
/* if it's an output, it ain't an interrupt anymore */
|
||||
GPIO_IRQ_falling_edge &= ~(1 << line);
|
||||
GPIO_IRQ_rising_edge &= ~(1 << line);
|
||||
|
@ -351,11 +349,6 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
|
|||
GPIO_IRQ_level_high &= ~(1 << line);
|
||||
update_gpio_int_csrs();
|
||||
|
||||
/*
|
||||
* Finally, mark the corresponding IRQ as valid.
|
||||
*/
|
||||
irq_desc[irq].valid = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -506,14 +499,10 @@ void __init ixp2000_init_irq(void)
|
|||
}
|
||||
set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
|
||||
|
||||
/*
|
||||
* GPIO IRQs are invalid until someone sets the interrupt mode
|
||||
* by calling set_irq_type().
|
||||
*/
|
||||
for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
|
||||
set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
|
||||
set_irq_handler(irq, do_level_IRQ);
|
||||
set_irq_flags(irq, 0);
|
||||
set_irq_flags(irq, IRQF_VALID);
|
||||
}
|
||||
set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
|
||||
|
||||
|
|
|
@ -284,7 +284,7 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
|
|||
{
|
||||
sys->mem_offset = 0xe0000000;
|
||||
|
||||
if (machine_is_ixdp2801())
|
||||
if (machine_is_ixdp2801() || machine_is_ixdp28x5())
|
||||
sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
|
||||
|
||||
return ixp2000_pci_setup(nr, sys);
|
||||
|
@ -300,7 +300,8 @@ struct hw_pci ixdp2x01_pci __initdata = {
|
|||
|
||||
int __init ixdp2x01_pci_init(void)
|
||||
{
|
||||
if (machine_is_ixdp2401() || machine_is_ixdp2801())
|
||||
if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
|
||||
machine_is_ixdp28x5())
|
||||
pci_common_init(&ixdp2x01_pci);
|
||||
|
||||
return 0;
|
||||
|
@ -400,6 +401,21 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
|
|||
.timer = &ixdp2x01_timer,
|
||||
.init_machine = ixdp2x01_init_machine,
|
||||
MACHINE_END
|
||||
|
||||
/*
|
||||
* IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
|
||||
* changed the machine ID in the bootloader
|
||||
*/
|
||||
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
|
||||
/* Maintainer: MontaVista Software, Inc. */
|
||||
.phys_io = IXP2000_UART_PHYS_BASE,
|
||||
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.map_io = ixdp2x01_map_io,
|
||||
.init_irq = ixdp2x01_init_irq,
|
||||
.timer = &ixdp2x01_timer,
|
||||
.init_machine = ixdp2x01_init_machine,
|
||||
MACHINE_END
|
||||
#endif
|
||||
|
||||
|
||||
|
|
|
@ -463,7 +463,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
|
|||
if (nr >= 1)
|
||||
return 0;
|
||||
|
||||
res = kmalloc(sizeof(*res) * 2, GFP_KERNEL);
|
||||
res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
|
||||
if (res == NULL) {
|
||||
/*
|
||||
* If we're out of memory this early, something is wrong,
|
||||
|
@ -471,7 +471,6 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
|
|||
*/
|
||||
panic("PCI: unable to allocate resources?\n");
|
||||
}
|
||||
memset(res, 0, sizeof(*res) * 2);
|
||||
|
||||
local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
|
||||
|
||||
|
|
|
@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
|
|||
/*
|
||||
* IRQ -> GPIO mapping table
|
||||
*/
|
||||
static int irq2gpio[32] = {
|
||||
static char irq2gpio[32] = {
|
||||
-1, -1, -1, -1, -1, -1, 0, 1,
|
||||
-1, -1, -1, -1, -1, -1, -1, -1,
|
||||
-1, -1, -1, 2, 3, 4, 5, 6,
|
||||
|
@ -153,6 +153,9 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
|
|||
/* Set the new style */
|
||||
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
|
||||
|
||||
/* Configure the line as an input */
|
||||
gpio_line_config(line, IXP4XX_GPIO_IN);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
@ -12,5 +12,6 @@ extern struct sys_timer lh7a40x_timer;
|
|||
|
||||
extern void lh7a400_init_irq (void);
|
||||
extern void lh7a404_init_irq (void);
|
||||
extern void lh7a40x_init_board_irq (void);
|
||||
|
||||
#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
|
||||
|
|
|
@ -16,6 +16,7 @@
|
|||
#include <asm/mach/hardware.h>
|
||||
#include <asm/mach/irqs.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
/* KEV7a400 CPLD IRQ handling */
|
||||
|
||||
|
|
|
@ -16,9 +16,9 @@
|
|||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/arch/irq.h>
|
||||
#include <asm/arch/irqs.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
/* CPU IRQ handling */
|
||||
|
||||
|
|
|
@ -16,9 +16,10 @@
|
|||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/arch/irq.h>
|
||||
#include <asm/arch/irqs.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
#define USE_PRIORITIES
|
||||
|
||||
/* See Documentation/arm/Sharp-LH/VectoredInterruptController for more
|
||||
|
|
|
@ -19,6 +19,7 @@
|
|||
#include <asm/mach/irq.h>
|
||||
#include <asm/arch/irqs.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
static void lh7a40x_ack_cpld_irq (u32 irq)
|
||||
{
|
||||
|
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
|
||||
# Common support (must be linked before board specific support)
|
||||
obj-y += generic.o irq.o dma.o time.o
|
||||
obj-y += clock.o generic.o irq.o dma.o time.o
|
||||
obj-$(CONFIG_PXA25x) += pxa25x.o
|
||||
obj-$(CONFIG_PXA27x) += pxa27x.o
|
||||
|
||||
|
|
124
arch/arm/mach-pxa/clock.c
Normal file
124
arch/arm/mach-pxa/clock.c
Normal file
|
@ -0,0 +1,124 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-sa1100/clock.c
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/semaphore.h>
|
||||
|
||||
struct clk {
|
||||
struct list_head node;
|
||||
unsigned long rate;
|
||||
struct module *owner;
|
||||
const char *name;
|
||||
unsigned int enabled;
|
||||
void (*enable)(void);
|
||||
void (*disable)(void);
|
||||
};
|
||||
|
||||
static LIST_HEAD(clocks);
|
||||
static DECLARE_MUTEX(clocks_sem);
|
||||
static DEFINE_SPINLOCK(clocks_lock);
|
||||
|
||||
struct clk *clk_get(struct device *dev, const char *id)
|
||||
{
|
||||
struct clk *p, *clk = ERR_PTR(-ENOENT);
|
||||
|
||||
down(&clocks_sem);
|
||||
list_for_each_entry(p, &clocks, node) {
|
||||
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
|
||||
clk = p;
|
||||
break;
|
||||
}
|
||||
}
|
||||
up(&clocks_sem);
|
||||
|
||||
return clk;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get);
|
||||
|
||||
void clk_put(struct clk *clk)
|
||||
{
|
||||
module_put(clk->owner);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_put);
|
||||
|
||||
int clk_enable(struct clk *clk)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&clocks_lock, flags);
|
||||
if (clk->enabled++ == 0)
|
||||
clk->enable();
|
||||
spin_unlock_irqrestore(&clocks_lock, flags);
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_enable);
|
||||
|
||||
void clk_disable(struct clk *clk)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
WARN_ON(clk->enabled == 0);
|
||||
|
||||
spin_lock_irqsave(&clocks_lock, flags);
|
||||
if (--clk->enabled == 0)
|
||||
clk->disable();
|
||||
spin_unlock_irqrestore(&clocks_lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_disable);
|
||||
|
||||
unsigned long clk_get_rate(struct clk *clk)
|
||||
{
|
||||
return clk->rate;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get_rate);
|
||||
|
||||
|
||||
static void clk_gpio27_enable(void)
|
||||
{
|
||||
pxa_gpio_mode(GPIO11_3_6MHz_MD);
|
||||
}
|
||||
|
||||
static void clk_gpio27_disable(void)
|
||||
{
|
||||
}
|
||||
|
||||
static struct clk clk_gpio27 = {
|
||||
.name = "GPIO27_CLK",
|
||||
.rate = 3686400,
|
||||
.enable = clk_gpio27_enable,
|
||||
.disable = clk_gpio27_disable,
|
||||
};
|
||||
|
||||
int clk_register(struct clk *clk)
|
||||
{
|
||||
down(&clocks_sem);
|
||||
list_add(&clk->node, &clocks);
|
||||
up(&clocks_sem);
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_register);
|
||||
|
||||
void clk_unregister(struct clk *clk)
|
||||
{
|
||||
down(&clocks_sem);
|
||||
list_del(&clk->node);
|
||||
up(&clocks_sem);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_unregister);
|
||||
|
||||
static int __init clk_init(void)
|
||||
{
|
||||
clk_register(&clk_gpio27);
|
||||
return 0;
|
||||
}
|
||||
arch_initcall(clk_init);
|
|
@ -32,7 +32,6 @@
|
|||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/irq.h>
|
||||
#include <asm/arch/irda.h>
|
||||
#include <asm/arch/mmc.h>
|
||||
#include <asm/arch/udc.h>
|
||||
|
|
|
@ -29,7 +29,6 @@
|
|||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/irq.h>
|
||||
#include <asm/arch/mmc.h>
|
||||
#include <asm/arch/udc.h>
|
||||
#include <asm/arch/irda.h>
|
||||
|
|
|
@ -33,7 +33,6 @@
|
|||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/irq.h>
|
||||
#include <asm/arch/irda.h>
|
||||
#include <asm/arch/mmc.h>
|
||||
#include <asm/arch/ohci.h>
|
||||
|
|
|
@ -34,7 +34,6 @@
|
|||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
#include <asm/arch/irq.h>
|
||||
#include <asm/arch/tosa.h>
|
||||
|
||||
#include <asm/hardware/scoop.h>
|
||||
|
|
|
@ -9,6 +9,13 @@ config MACH_ANUBIS
|
|||
Say Y gere if you are using the Simtec Electronics ANUBIS
|
||||
development system
|
||||
|
||||
config MACH_OSIRIS
|
||||
bool "Simtec IM2440D20 (OSIRIS) module"
|
||||
select CPU_S3C2440
|
||||
help
|
||||
Say Y here if you are using the Simtec IM2440D20 module, also
|
||||
known as the Osiris.
|
||||
|
||||
config ARCH_BAST
|
||||
bool "Simtec Electronics BAST (EB2410ITX)"
|
||||
select CPU_S3C2410
|
||||
|
|
|
@ -38,6 +38,7 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
|
|||
# machine specific support
|
||||
|
||||
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
|
||||
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
|
||||
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
|
||||
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
|
||||
obj-$(CONFIG_MACH_N30) += mach-n30.o
|
||||
|
|
|
@ -38,12 +38,14 @@
|
|||
#include <linux/ioport.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#include <asm/arch/regs-clock.h>
|
||||
#include <asm/arch/regs-gpio.h>
|
||||
|
||||
#include "clock.h"
|
||||
#include "cpu.h"
|
||||
|
@ -51,7 +53,8 @@
|
|||
/* clock information */
|
||||
|
||||
static LIST_HEAD(clocks);
|
||||
static DEFINE_MUTEX(clocks_mutex);
|
||||
|
||||
DEFINE_MUTEX(clocks_mutex);
|
||||
|
||||
/* old functions */
|
||||
|
||||
|
@ -178,12 +181,24 @@ unsigned long clk_get_rate(struct clk *clk)
|
|||
|
||||
long clk_round_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
if (!IS_ERR(clk) && clk->round_rate)
|
||||
return (clk->round_rate)(clk, rate);
|
||||
|
||||
return rate;
|
||||
}
|
||||
|
||||
int clk_set_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
return -EINVAL;
|
||||
int ret;
|
||||
|
||||
if (IS_ERR(clk))
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
ret = (clk->set_rate)(clk, rate);
|
||||
mutex_unlock(&clocks_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
struct clk *clk_get_parent(struct clk *clk)
|
||||
|
@ -191,6 +206,23 @@ struct clk *clk_get_parent(struct clk *clk)
|
|||
return clk->parent;
|
||||
}
|
||||
|
||||
int clk_set_parent(struct clk *clk, struct clk *parent)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (IS_ERR(clk))
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
|
||||
if (clk->set_parent)
|
||||
ret = (clk->set_parent)(clk, parent);
|
||||
|
||||
mutex_unlock(&clocks_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(clk_get);
|
||||
EXPORT_SYMBOL(clk_put);
|
||||
EXPORT_SYMBOL(clk_enable);
|
||||
|
@ -199,6 +231,29 @@ EXPORT_SYMBOL(clk_get_rate);
|
|||
EXPORT_SYMBOL(clk_round_rate);
|
||||
EXPORT_SYMBOL(clk_set_rate);
|
||||
EXPORT_SYMBOL(clk_get_parent);
|
||||
EXPORT_SYMBOL(clk_set_parent);
|
||||
|
||||
/* base clock enable */
|
||||
|
||||
static int s3c24xx_upll_enable(struct clk *clk, int enable)
|
||||
{
|
||||
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
|
||||
unsigned long orig = clkslow;
|
||||
|
||||
if (enable)
|
||||
clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
|
||||
else
|
||||
clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
|
||||
|
||||
__raw_writel(clkslow, S3C2410_CLKSLOW);
|
||||
|
||||
/* if we started the UPLL, then allow to settle */
|
||||
|
||||
if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF))
|
||||
udelay(200);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* base clocks */
|
||||
|
||||
|
@ -210,6 +265,14 @@ static struct clk clk_xtal = {
|
|||
.ctrlbit = 0,
|
||||
};
|
||||
|
||||
static struct clk clk_upll = {
|
||||
.name = "upll",
|
||||
.id = -1,
|
||||
.parent = NULL,
|
||||
.enable = s3c24xx_upll_enable,
|
||||
.ctrlbit = 0,
|
||||
};
|
||||
|
||||
static struct clk clk_f = {
|
||||
.name = "fclk",
|
||||
.id = -1,
|
||||
|
@ -234,26 +297,124 @@ static struct clk clk_p = {
|
|||
.ctrlbit = 0,
|
||||
};
|
||||
|
||||
struct clk clk_usb_bus = {
|
||||
.name = "usb-bus",
|
||||
.id = -1,
|
||||
.rate = 0,
|
||||
.parent = &clk_upll,
|
||||
};
|
||||
|
||||
/* clocks that could be registered by external code */
|
||||
|
||||
static int s3c24xx_dclk_enable(struct clk *clk, int enable)
|
||||
{
|
||||
unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON);
|
||||
|
||||
if (enable)
|
||||
dclkcon |= clk->ctrlbit;
|
||||
else
|
||||
dclkcon &= ~clk->ctrlbit;
|
||||
|
||||
__raw_writel(dclkcon, S3C2410_DCLKCON);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
|
||||
{
|
||||
unsigned long dclkcon;
|
||||
unsigned int uclk;
|
||||
|
||||
if (parent == &clk_upll)
|
||||
uclk = 1;
|
||||
else if (parent == &clk_p)
|
||||
uclk = 0;
|
||||
else
|
||||
return -EINVAL;
|
||||
|
||||
clk->parent = parent;
|
||||
|
||||
dclkcon = __raw_readl(S3C2410_DCLKCON);
|
||||
|
||||
if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
|
||||
if (uclk)
|
||||
dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
|
||||
else
|
||||
dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
|
||||
} else {
|
||||
if (uclk)
|
||||
dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
|
||||
else
|
||||
dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
|
||||
}
|
||||
|
||||
__raw_writel(dclkcon, S3C2410_DCLKCON);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
|
||||
{
|
||||
unsigned long mask;
|
||||
unsigned long source;
|
||||
|
||||
/* calculate the MISCCR setting for the clock */
|
||||
|
||||
if (parent == &clk_xtal)
|
||||
source = S3C2410_MISCCR_CLK0_MPLL;
|
||||
else if (parent == &clk_upll)
|
||||
source = S3C2410_MISCCR_CLK0_UPLL;
|
||||
else if (parent == &clk_f)
|
||||
source = S3C2410_MISCCR_CLK0_FCLK;
|
||||
else if (parent == &clk_p)
|
||||
source = S3C2410_MISCCR_CLK0_PCLK;
|
||||
else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
|
||||
source = S3C2410_MISCCR_CLK0_DCLK0;
|
||||
else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
|
||||
source = S3C2410_MISCCR_CLK0_DCLK0;
|
||||
else
|
||||
return -EINVAL;
|
||||
|
||||
if (clk == &s3c24xx_dclk0)
|
||||
mask = S3C2410_MISCCR_CLK0_MASK;
|
||||
else {
|
||||
source <<= 4;
|
||||
mask = S3C2410_MISCCR_CLK1_MASK;
|
||||
}
|
||||
|
||||
s3c2410_modify_misccr(mask, source);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* external clock definitions */
|
||||
|
||||
struct clk s3c24xx_dclk0 = {
|
||||
.name = "dclk0",
|
||||
.id = -1,
|
||||
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
|
||||
.enable = s3c24xx_dclk_enable,
|
||||
.set_parent = s3c24xx_dclk_setparent,
|
||||
};
|
||||
|
||||
struct clk s3c24xx_dclk1 = {
|
||||
.name = "dclk1",
|
||||
.id = -1,
|
||||
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
|
||||
.enable = s3c24xx_dclk_enable,
|
||||
.set_parent = s3c24xx_dclk_setparent,
|
||||
};
|
||||
|
||||
struct clk s3c24xx_clkout0 = {
|
||||
.name = "clkout0",
|
||||
.id = -1,
|
||||
.set_parent = s3c24xx_clkout_setparent,
|
||||
};
|
||||
|
||||
struct clk s3c24xx_clkout1 = {
|
||||
.name = "clkout1",
|
||||
.id = -1,
|
||||
.set_parent = s3c24xx_clkout_setparent,
|
||||
};
|
||||
|
||||
struct clk s3c24xx_uclk = {
|
||||
|
@ -262,7 +423,7 @@ struct clk s3c24xx_uclk = {
|
|||
};
|
||||
|
||||
|
||||
/* clock definitions */
|
||||
/* standard clock definitions */
|
||||
|
||||
static struct clk init_clocks[] = {
|
||||
{
|
||||
|
@ -374,7 +535,7 @@ int s3c24xx_register_clock(struct clk *clk)
|
|||
|
||||
/* if this is a standard clock, set the usage state */
|
||||
|
||||
if (clk->ctrlbit) {
|
||||
if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) {
|
||||
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
|
||||
|
||||
clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
|
||||
|
@ -396,6 +557,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
|
|||
unsigned long hclk,
|
||||
unsigned long pclk)
|
||||
{
|
||||
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
|
||||
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
|
||||
struct clk *clkp = init_clocks;
|
||||
int ptr;
|
||||
|
@ -406,6 +568,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
|
|||
/* initialise the main system clocks */
|
||||
|
||||
clk_xtal.rate = xtal;
|
||||
clk_upll.rate = s3c2410_get_pll(upllcon, xtal);
|
||||
|
||||
clk_h.rate = hclk;
|
||||
clk_p.rate = pclk;
|
||||
|
@ -439,6 +602,9 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
|
|||
if (s3c24xx_register_clock(&clk_xtal) < 0)
|
||||
printk(KERN_ERR "failed to register master xtal\n");
|
||||
|
||||
if (s3c24xx_register_clock(&clk_upll) < 0)
|
||||
printk(KERN_ERR "failed to register upll clock\n");
|
||||
|
||||
if (s3c24xx_register_clock(&clk_f) < 0)
|
||||
printk(KERN_ERR "failed to register cpu fclk\n");
|
||||
|
||||
|
@ -448,6 +614,10 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
|
|||
if (s3c24xx_register_clock(&clk_p) < 0)
|
||||
printk(KERN_ERR "failed to register cpu pclk\n");
|
||||
|
||||
|
||||
if (s3c24xx_register_clock(&clk_usb_bus) < 0)
|
||||
printk(KERN_ERR "failed to register usb bus clock\n");
|
||||
|
||||
/* register clocks from clock array */
|
||||
|
||||
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
|
||||
|
|
|
@ -19,7 +19,11 @@ struct clk {
|
|||
int usage;
|
||||
unsigned long rate;
|
||||
unsigned long ctrlbit;
|
||||
|
||||
int (*enable)(struct clk *, int enable);
|
||||
int (*set_rate)(struct clk *c, unsigned long rate);
|
||||
unsigned long (*round_rate)(struct clk *c, unsigned long rate);
|
||||
int (*set_parent)(struct clk *c, struct clk *parent);
|
||||
};
|
||||
|
||||
/* other clocks which may be registered by board support */
|
||||
|
@ -30,11 +34,15 @@ extern struct clk s3c24xx_clkout0;
|
|||
extern struct clk s3c24xx_clkout1;
|
||||
extern struct clk s3c24xx_uclk;
|
||||
|
||||
extern struct clk clk_usb_bus;
|
||||
|
||||
/* exports for arch/arm/mach-s3c2410
|
||||
*
|
||||
* Please DO NOT use these outside of arch/arm/mach-s3c2410
|
||||
*/
|
||||
|
||||
extern struct mutex clocks_mutex;
|
||||
|
||||
extern int s3c24xx_clkcon_enable(struct clk *clk, int enable);
|
||||
extern int s3c24xx_register_clock(struct clk *clk);
|
||||
|
||||
|
|
294
arch/arm/mach-s3c2410/mach-osiris.c
Normal file
294
arch/arm/mach-s3c2410/mach-osiris.c
Normal file
|
@ -0,0 +1,294 @@
|
|||
/* linux/arch/arm/mach-s3c2410/mach-osiris.c
|
||||
*
|
||||
* Copyright (c) 2005 Simtec Electronics
|
||||
* http://armlinux.simtec.co.uk/
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <asm/arch/osiris-map.h>
|
||||
#include <asm/arch/osiris-cpld.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <asm/arch/regs-serial.h>
|
||||
#include <asm/arch/regs-gpio.h>
|
||||
#include <asm/arch/regs-mem.h>
|
||||
#include <asm/arch/regs-lcd.h>
|
||||
#include <asm/arch/nand.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/mtd/nand_ecc.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
#include "clock.h"
|
||||
#include "devs.h"
|
||||
#include "cpu.h"
|
||||
|
||||
/* onboard perihpheral map */
|
||||
|
||||
static struct map_desc osiris_iodesc[] __initdata = {
|
||||
/* ISA IO areas (may be over-written later) */
|
||||
|
||||
{
|
||||
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
|
||||
.pfn = __phys_to_pfn(S3C2410_CS5),
|
||||
.length = SZ_16M,
|
||||
.type = MT_DEVICE,
|
||||
}, {
|
||||
.virtual = (u32)S3C24XX_VA_ISA_WORD,
|
||||
.pfn = __phys_to_pfn(S3C2410_CS5),
|
||||
.length = SZ_16M,
|
||||
.type = MT_DEVICE,
|
||||
},
|
||||
|
||||
/* CPLD control registers */
|
||||
|
||||
{
|
||||
.virtual = (u32)OSIRIS_VA_CTRL1,
|
||||
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
|
||||
.length = SZ_16K,
|
||||
.type = MT_DEVICE
|
||||
}, {
|
||||
.virtual = (u32)OSIRIS_VA_CTRL2,
|
||||
.pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
|
||||
.length = SZ_16K,
|
||||
.type = MT_DEVICE
|
||||
},
|
||||
};
|
||||
|
||||
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
|
||||
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
|
||||
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
|
||||
|
||||
static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
|
||||
[0] = {
|
||||
.name = "uclk",
|
||||
.divisor = 1,
|
||||
.min_baud = 0,
|
||||
.max_baud = 0,
|
||||
},
|
||||
[1] = {
|
||||
.name = "pclk",
|
||||
.divisor = 1,
|
||||
.min_baud = 0,
|
||||
.max_baud = 0.
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static struct s3c2410_uartcfg osiris_uartcfgs[] = {
|
||||
[0] = {
|
||||
.hwport = 0,
|
||||
.flags = 0,
|
||||
.ucon = UCON,
|
||||
.ulcon = ULCON,
|
||||
.ufcon = UFCON,
|
||||
.clocks = osiris_serial_clocks,
|
||||
.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
|
||||
},
|
||||
[1] = {
|
||||
.hwport = 2,
|
||||
.flags = 0,
|
||||
.ucon = UCON,
|
||||
.ulcon = ULCON,
|
||||
.ufcon = UFCON,
|
||||
.clocks = osiris_serial_clocks,
|
||||
.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
|
||||
},
|
||||
};
|
||||
|
||||
/* NAND Flash on Osiris board */
|
||||
|
||||
static int external_map[] = { 2 };
|
||||
static int chip0_map[] = { 0 };
|
||||
static int chip1_map[] = { 1 };
|
||||
|
||||
static struct mtd_partition osiris_default_nand_part[] = {
|
||||
[0] = {
|
||||
.name = "Boot Agent",
|
||||
.size = SZ_16K,
|
||||
.offset = 0
|
||||
},
|
||||
[1] = {
|
||||
.name = "/boot",
|
||||
.size = SZ_4M - SZ_16K,
|
||||
.offset = SZ_16K,
|
||||
},
|
||||
[2] = {
|
||||
.name = "user1",
|
||||
.offset = SZ_4M,
|
||||
.size = SZ_32M - SZ_4M,
|
||||
},
|
||||
[3] = {
|
||||
.name = "user2",
|
||||
.offset = SZ_32M,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
}
|
||||
};
|
||||
|
||||
/* the Osiris has 3 selectable slots for nand-flash, the two
|
||||
* on-board chip areas, as well as the external slot.
|
||||
*
|
||||
* Note, there is no current hot-plug support for the External
|
||||
* socket.
|
||||
*/
|
||||
|
||||
static struct s3c2410_nand_set osiris_nand_sets[] = {
|
||||
[1] = {
|
||||
.name = "External",
|
||||
.nr_chips = 1,
|
||||
.nr_map = external_map,
|
||||
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
|
||||
.partitions = osiris_default_nand_part
|
||||
},
|
||||
[0] = {
|
||||
.name = "chip0",
|
||||
.nr_chips = 1,
|
||||
.nr_map = chip0_map,
|
||||
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
|
||||
.partitions = osiris_default_nand_part
|
||||
},
|
||||
[2] = {
|
||||
.name = "chip1",
|
||||
.nr_chips = 1,
|
||||
.nr_map = chip1_map,
|
||||
.nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
|
||||
.partitions = osiris_default_nand_part
|
||||
},
|
||||
};
|
||||
|
||||
static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
|
||||
{
|
||||
unsigned int tmp;
|
||||
|
||||
slot = set->nr_map[slot] & 3;
|
||||
|
||||
pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
|
||||
slot, set, set->nr_map);
|
||||
|
||||
tmp = __raw_readb(OSIRIS_VA_CTRL1);
|
||||
tmp &= ~OSIRIS_CTRL1_NANDSEL;
|
||||
tmp |= slot;
|
||||
|
||||
pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
|
||||
|
||||
__raw_writeb(tmp, OSIRIS_VA_CTRL1);
|
||||
}
|
||||
|
||||
static struct s3c2410_platform_nand osiris_nand_info = {
|
||||
.tacls = 25,
|
||||
.twrph0 = 60,
|
||||
.twrph1 = 60,
|
||||
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
|
||||
.sets = osiris_nand_sets,
|
||||
.select_chip = osiris_nand_select,
|
||||
};
|
||||
|
||||
/* PCMCIA control and configuration */
|
||||
|
||||
static struct resource osiris_pcmcia_resource[] = {
|
||||
[0] = {
|
||||
.start = 0x0f000000,
|
||||
.end = 0x0f100000,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = 0x0c000000,
|
||||
.end = 0x0c100000,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device osiris_pcmcia = {
|
||||
.name = "osiris-pcmcia",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
|
||||
.resource = osiris_pcmcia_resource,
|
||||
};
|
||||
|
||||
/* Standard Osiris devices */
|
||||
|
||||
static struct platform_device *osiris_devices[] __initdata = {
|
||||
&s3c_device_i2c,
|
||||
&s3c_device_nand,
|
||||
&osiris_pcmcia,
|
||||
};
|
||||
|
||||
static struct clk *osiris_clocks[] = {
|
||||
&s3c24xx_dclk0,
|
||||
&s3c24xx_dclk1,
|
||||
&s3c24xx_clkout0,
|
||||
&s3c24xx_clkout1,
|
||||
&s3c24xx_uclk,
|
||||
};
|
||||
|
||||
static struct s3c24xx_board osiris_board __initdata = {
|
||||
.devices = osiris_devices,
|
||||
.devices_count = ARRAY_SIZE(osiris_devices),
|
||||
.clocks = osiris_clocks,
|
||||
.clocks_count = ARRAY_SIZE(osiris_clocks)
|
||||
};
|
||||
|
||||
static void __init osiris_map_io(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
/* initialise the clocks */
|
||||
|
||||
s3c24xx_dclk0.parent = NULL;
|
||||
s3c24xx_dclk0.rate = 12*1000*1000;
|
||||
|
||||
s3c24xx_dclk1.parent = NULL;
|
||||
s3c24xx_dclk1.rate = 24*1000*1000;
|
||||
|
||||
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
|
||||
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
|
||||
|
||||
s3c24xx_uclk.parent = &s3c24xx_clkout1;
|
||||
|
||||
s3c_device_nand.dev.platform_data = &osiris_nand_info;
|
||||
|
||||
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
|
||||
s3c24xx_init_clocks(0);
|
||||
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
|
||||
s3c24xx_set_board(&osiris_board);
|
||||
|
||||
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
|
||||
|
||||
local_irq_save(flags);
|
||||
__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
|
||||
local_irq_restore(flags);
|
||||
|
||||
/* write-protect line to the NAND */
|
||||
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
|
||||
}
|
||||
|
||||
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
|
||||
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
|
||||
.phys_io = S3C2410_PA_UART,
|
||||
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
|
||||
.boot_params = S3C2410_SDRAM_PA + 0x100,
|
||||
.map_io = osiris_map_io,
|
||||
.init_irq = s3c24xx_init_irq,
|
||||
.timer = &s3c24xx_timer,
|
||||
MACHINE_END
|
|
@ -31,6 +31,7 @@
|
|||
#include <linux/sysdev.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/clk.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
@ -45,10 +46,47 @@
|
|||
|
||||
/* S3C2440 extended clock support */
|
||||
|
||||
static struct clk s3c2440_clk_upll = {
|
||||
.name = "upll",
|
||||
.id = -1,
|
||||
};
|
||||
static unsigned long s3c2440_camif_upll_round(struct clk *clk,
|
||||
unsigned long rate)
|
||||
{
|
||||
unsigned long parent_rate = clk_get_rate(clk->parent);
|
||||
int div;
|
||||
|
||||
if (rate > parent_rate)
|
||||
return parent_rate;
|
||||
|
||||
/* note, we remove the +/- 1 calculations for the divisor */
|
||||
|
||||
div = (parent_rate / rate) / 2;
|
||||
|
||||
if (div < 1)
|
||||
div = 1;
|
||||
else if (div > 16)
|
||||
div = 16;
|
||||
|
||||
return parent_rate / (div * 2);
|
||||
}
|
||||
|
||||
static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
unsigned long parent_rate = clk_get_rate(clk->parent);
|
||||
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
|
||||
|
||||
rate = s3c2440_camif_upll_round(clk, rate);
|
||||
|
||||
camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
|
||||
|
||||
if (rate != parent_rate) {
|
||||
camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
|
||||
camdivn |= (((parent_rate / rate) / 2) - 1);
|
||||
}
|
||||
|
||||
__raw_writel(camdivn, S3C2440_CAMDIVN);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Extra S3C2440 clocks */
|
||||
|
||||
static struct clk s3c2440_clk_cam = {
|
||||
.name = "camif",
|
||||
|
@ -57,6 +95,13 @@ static struct clk s3c2440_clk_cam = {
|
|||
.ctrlbit = S3C2440_CLKCON_CAMERA,
|
||||
};
|
||||
|
||||
static struct clk s3c2440_clk_cam_upll = {
|
||||
.name = "camif-upll",
|
||||
.id = -1,
|
||||
.set_rate = s3c2440_camif_upll_setrate,
|
||||
.round_rate = s3c2440_camif_upll_round,
|
||||
};
|
||||
|
||||
static struct clk s3c2440_clk_ac97 = {
|
||||
.name = "ac97",
|
||||
.id = -1,
|
||||
|
@ -66,38 +111,46 @@ static struct clk s3c2440_clk_ac97 = {
|
|||
|
||||
static int s3c2440_clk_add(struct sys_device *sysdev)
|
||||
{
|
||||
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
|
||||
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
|
||||
unsigned long clkdivn;
|
||||
struct clk *clk_h;
|
||||
struct clk *clk_p;
|
||||
struct clk *clk_xtal;
|
||||
struct clk *clk_upll;
|
||||
|
||||
clk_xtal = clk_get(NULL, "xtal");
|
||||
if (IS_ERR(clk_xtal)) {
|
||||
printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
|
||||
|
||||
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
|
||||
print_mhz(s3c2440_clk_upll.rate),
|
||||
printk("S3C2440: Clock Support, DVS %s\n",
|
||||
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
|
||||
|
||||
clk_p = clk_get(NULL, "pclk");
|
||||
clk_h = clk_get(NULL, "hclk");
|
||||
clk_upll = clk_get(NULL, "upll");
|
||||
|
||||
if (IS_ERR(clk_p) || IS_ERR(clk_h)) {
|
||||
if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
|
||||
printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* check rate of UPLL, and if it is near 96MHz, then change
|
||||
* to using half the UPLL rate for the system */
|
||||
|
||||
if (clk_get_rate(clk_upll) > (94 * MHZ)) {
|
||||
clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
|
||||
|
||||
mutex_lock(&clocks_mutex);
|
||||
|
||||
clkdivn = __raw_readl(S3C2410_CLKDIVN);
|
||||
clkdivn |= S3C2440_CLKDIVN_UCLK;
|
||||
__raw_writel(camdivn, S3C2410_CLKDIVN);
|
||||
|
||||
mutex_unlock(&clocks_mutex);
|
||||
}
|
||||
|
||||
s3c2440_clk_cam.parent = clk_h;
|
||||
s3c2440_clk_ac97.parent = clk_p;
|
||||
s3c2440_clk_cam_upll.parent = clk_upll;
|
||||
|
||||
s3c24xx_register_clock(&s3c2440_clk_ac97);
|
||||
s3c24xx_register_clock(&s3c2440_clk_cam);
|
||||
s3c24xx_register_clock(&s3c2440_clk_upll);
|
||||
s3c24xx_register_clock(&s3c2440_clk_cam_upll);
|
||||
|
||||
clk_disable(&s3c2440_clk_ac97);
|
||||
clk_disable(&s3c2440_clk_cam);
|
||||
|
|
|
@ -142,6 +142,12 @@ static struct irqaction s3c2410_timer_irq = {
|
|||
.handler = s3c2410_timer_interrupt,
|
||||
};
|
||||
|
||||
#define use_tclk1_12() ( \
|
||||
machine_is_bast() || \
|
||||
machine_is_vr1000() || \
|
||||
machine_is_anubis() || \
|
||||
machine_is_osiris() )
|
||||
|
||||
/*
|
||||
* Set up timer interrupt, and return the current time in seconds.
|
||||
*
|
||||
|
@ -165,7 +171,7 @@ static void s3c2410_timer_setup (void)
|
|||
|
||||
/* configure the system for whichever machine is in use */
|
||||
|
||||
if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) {
|
||||
if (use_tclk1_12()) {
|
||||
/* timer is at 12MHz, scaler is 1 */
|
||||
timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
|
||||
tcnt = 12000000 / HZ;
|
||||
|
|
|
@ -3,7 +3,7 @@
|
|||
#
|
||||
|
||||
# Common support
|
||||
obj-y := generic.o irq.o dma.o time.o
|
||||
obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
|
||||
obj-m :=
|
||||
obj-n :=
|
||||
obj- :=
|
||||
|
|
132
arch/arm/mach-sa1100/clock.c
Normal file
132
arch/arm/mach-sa1100/clock.c
Normal file
|
@ -0,0 +1,132 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-sa1100/clock.c
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/semaphore.h>
|
||||
|
||||
struct clk {
|
||||
struct list_head node;
|
||||
unsigned long rate;
|
||||
struct module *owner;
|
||||
const char *name;
|
||||
unsigned int enabled;
|
||||
void (*enable)(void);
|
||||
void (*disable)(void);
|
||||
};
|
||||
|
||||
static LIST_HEAD(clocks);
|
||||
static DECLARE_MUTEX(clocks_sem);
|
||||
static DEFINE_SPINLOCK(clocks_lock);
|
||||
|
||||
struct clk *clk_get(struct device *dev, const char *id)
|
||||
{
|
||||
struct clk *p, *clk = ERR_PTR(-ENOENT);
|
||||
|
||||
down(&clocks_sem);
|
||||
list_for_each_entry(p, &clocks, node) {
|
||||
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
|
||||
clk = p;
|
||||
break;
|
||||
}
|
||||
}
|
||||
up(&clocks_sem);
|
||||
|
||||
return clk;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get);
|
||||
|
||||
void clk_put(struct clk *clk)
|
||||
{
|
||||
module_put(clk->owner);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_put);
|
||||
|
||||
int clk_enable(struct clk *clk)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&clocks_lock, flags);
|
||||
if (clk->enabled++ == 0)
|
||||
clk->enable();
|
||||
spin_unlock_irqrestore(&clocks_lock, flags);
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_enable);
|
||||
|
||||
void clk_disable(struct clk *clk)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
WARN_ON(clk->enabled == 0);
|
||||
|
||||
spin_lock_irqsave(&clocks_lock, flags);
|
||||
if (--clk->enabled == 0)
|
||||
clk->disable();
|
||||
spin_unlock_irqrestore(&clocks_lock, flags);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_disable);
|
||||
|
||||
unsigned long clk_get_rate(struct clk *clk)
|
||||
{
|
||||
return clk->rate;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get_rate);
|
||||
|
||||
|
||||
static void clk_gpio27_enable(void)
|
||||
{
|
||||
/*
|
||||
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
|
||||
* (SA-1110 Developer's Manual, section 9.1.2.1)
|
||||
*/
|
||||
GAFR |= GPIO_32_768kHz;
|
||||
GPDR |= GPIO_32_768kHz;
|
||||
TUCR = TUCR_3_6864MHz;
|
||||
}
|
||||
|
||||
static void clk_gpio27_disable(void)
|
||||
{
|
||||
TUCR = 0;
|
||||
GPDR &= ~GPIO_32_768kHz;
|
||||
GAFR &= ~GPIO_32_768kHz;
|
||||
}
|
||||
|
||||
static struct clk clk_gpio27 = {
|
||||
.name = "GPIO27_CLK",
|
||||
.rate = 3686400,
|
||||
.enable = clk_gpio27_enable,
|
||||
.disable = clk_gpio27_disable,
|
||||
};
|
||||
|
||||
int clk_register(struct clk *clk)
|
||||
{
|
||||
down(&clocks_sem);
|
||||
list_add(&clk->node, &clocks);
|
||||
up(&clocks_sem);
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_register);
|
||||
|
||||
void clk_unregister(struct clk *clk)
|
||||
{
|
||||
down(&clocks_sem);
|
||||
list_del(&clk->node);
|
||||
up(&clocks_sem);
|
||||
}
|
||||
EXPORT_SYMBOL(clk_unregister);
|
||||
|
||||
static int __init clk_init(void)
|
||||
{
|
||||
clk_register(&clk_gpio27);
|
||||
return 0;
|
||||
}
|
||||
arch_initcall(clk_init);
|
|
@ -112,7 +112,7 @@ void __init versatile_init_irq(void)
|
|||
{
|
||||
unsigned int i;
|
||||
|
||||
vic_init(VA_VIC_BASE, ~(1 << 31));
|
||||
vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31));
|
||||
|
||||
set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
|
||||
enable_irq(IRQ_VICSOURCE31);
|
||||
|
|
|
@ -62,7 +62,7 @@ config CPU_ARM720T
|
|||
# ARM920T
|
||||
config CPU_ARM920T
|
||||
bool "Support ARM920T processor" if !ARCH_S3C2410
|
||||
depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
|
||||
depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
|
||||
default y if ARCH_S3C2410 || ARCH_AT91RM9200
|
||||
select CPU_32v4
|
||||
select CPU_ABRT_EV4T
|
||||
|
|
|
@ -19,7 +19,6 @@
|
|||
#include <linux/initrd.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/setup.h>
|
||||
#include <asm/tlb.h>
|
||||
|
||||
|
|
|
@ -26,7 +26,6 @@
|
|||
#include <linux/vmalloc.h>
|
||||
|
||||
#include <asm/cacheflush.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/tlbflush.h>
|
||||
|
||||
|
|
|
@ -32,7 +32,6 @@
|
|||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
/*
|
||||
* This is the maximum size of an area which will be invalidated
|
||||
|
|
|
@ -32,7 +32,6 @@
|
|||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
/*
|
||||
* This is the maximum size of an area which will be invalidated
|
||||
|
|
|
@ -37,7 +37,6 @@
|
|||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
/*
|
||||
* Function: arm720_proc_init (void)
|
||||
|
|
|
@ -30,7 +30,6 @@
|
|||
#include <asm/assembler.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include "proc-macros.S"
|
||||
|
|
|
@ -31,7 +31,6 @@
|
|||
#include <asm/assembler.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include "proc-macros.S"
|
||||
|
|
|
@ -53,7 +53,6 @@
|
|||
#include <asm/assembler.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include "proc-macros.S"
|
||||
|
|
|
@ -30,7 +30,6 @@
|
|||
#include <asm/assembler.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/ptrace.h>
|
||||
#include "proc-macros.S"
|
||||
|
|
|
@ -24,7 +24,6 @@
|
|||
#include <linux/init.h>
|
||||
#include <asm/assembler.h>
|
||||
#include <asm/procinfo.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/ptrace.h>
|
||||
|
|
|
@ -10,17 +10,18 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/oprofile.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/sysdev.h>
|
||||
#include <asm/semaphore.h>
|
||||
#include <linux/mutex.h>
|
||||
|
||||
#include "op_counter.h"
|
||||
#include "op_arm_model.h"
|
||||
|
||||
static struct op_arm_model_spec *op_arm_model;
|
||||
static int op_arm_enabled;
|
||||
static struct semaphore op_arm_sem;
|
||||
static DEFINE_MUTEX(op_arm_mutex);
|
||||
|
||||
struct op_counter_config counter_config[OP_MAX_COUNTER];
|
||||
struct op_counter_config *counter_config;
|
||||
|
||||
static int op_arm_create_files(struct super_block *sb, struct dentry *root)
|
||||
{
|
||||
|
@ -28,7 +29,7 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root)
|
|||
|
||||
for (i = 0; i < op_arm_model->num_counters; i++) {
|
||||
struct dentry *dir;
|
||||
char buf[2];
|
||||
char buf[4];
|
||||
|
||||
snprintf(buf, sizeof buf, "%d", i);
|
||||
dir = oprofilefs_mkdir(sb, root, buf);
|
||||
|
@ -57,40 +58,40 @@ static int op_arm_start(void)
|
|||
{
|
||||
int ret = -EBUSY;
|
||||
|
||||
down(&op_arm_sem);
|
||||
mutex_lock(&op_arm_mutex);
|
||||
if (!op_arm_enabled) {
|
||||
ret = op_arm_model->start();
|
||||
op_arm_enabled = !ret;
|
||||
}
|
||||
up(&op_arm_sem);
|
||||
mutex_unlock(&op_arm_mutex);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void op_arm_stop(void)
|
||||
{
|
||||
down(&op_arm_sem);
|
||||
mutex_lock(&op_arm_mutex);
|
||||
if (op_arm_enabled)
|
||||
op_arm_model->stop();
|
||||
op_arm_enabled = 0;
|
||||
up(&op_arm_sem);
|
||||
mutex_unlock(&op_arm_mutex);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
|
||||
{
|
||||
down(&op_arm_sem);
|
||||
mutex_lock(&op_arm_mutex);
|
||||
if (op_arm_enabled)
|
||||
op_arm_model->stop();
|
||||
up(&op_arm_sem);
|
||||
mutex_unlock(&op_arm_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int op_arm_resume(struct sys_device *dev)
|
||||
{
|
||||
down(&op_arm_sem);
|
||||
mutex_lock(&op_arm_mutex);
|
||||
if (op_arm_enabled && op_arm_model->start())
|
||||
op_arm_enabled = 0;
|
||||
up(&op_arm_sem);
|
||||
mutex_unlock(&op_arm_mutex);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -135,12 +136,15 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
|
|||
#endif
|
||||
|
||||
if (spec) {
|
||||
init_MUTEX(&op_arm_sem);
|
||||
|
||||
ret = spec->init();
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config),
|
||||
GFP_KERNEL);
|
||||
if (!counter_config)
|
||||
return -ENOMEM;
|
||||
|
||||
op_arm_model = spec;
|
||||
init_driverfs();
|
||||
ops->create_files = op_arm_create_files;
|
||||
|
@ -162,5 +166,5 @@ void oprofile_arch_exit(void)
|
|||
exit_driverfs();
|
||||
op_arm_model = NULL;
|
||||
}
|
||||
kfree(counter_config);
|
||||
}
|
||||
|
||||
|
|
|
@ -24,6 +24,6 @@ struct op_counter_config {
|
|||
unsigned long user;
|
||||
};
|
||||
|
||||
extern struct op_counter_config counter_config[];
|
||||
extern struct op_counter_config *counter_config;
|
||||
|
||||
#endif /* OP_COUNTER_H */
|
||||
|
|
|
@ -22,6 +22,7 @@
|
|||
|
||||
.globl do_vfp
|
||||
do_vfp:
|
||||
enable_irq
|
||||
ldr r4, .LCvfp
|
||||
add r10, r10, #TI_VFPSTATE @ r10 = workspace
|
||||
ldr pc, [r4] @ call VFP entry point
|
||||
|
|
|
@ -16,7 +16,7 @@
|
|||
#include <linux/etherdevice.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <asm/arch/uengine.h>
|
||||
#include <asm/hardware/uengine.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/io.h>
|
||||
#include "ixpdev.h"
|
||||
|
|
|
@ -16,7 +16,7 @@
|
|||
#include <linux/etherdevice.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <asm/arch/uengine.h>
|
||||
#include <asm/hardware/uengine.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/io.h>
|
||||
#include "ixp2400_rx.ucode"
|
||||
|
|
|
@ -1,15 +0,0 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/param.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_PARAM_H
|
||||
#define __ASM_ARCH_PARAM_H
|
||||
|
||||
#endif /* __ASM_ARCH_PARAM_H */
|
||||
|
|
@ -1,28 +0,0 @@
|
|||
/*
|
||||
* include/asm-arm/arch-at91rm9200/param.h
|
||||
*
|
||||
* Copyright (C) 2003 SAN People
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_PARAM_H
|
||||
#define __ASM_ARCH_PARAM_H
|
||||
|
||||
/*
|
||||
* We use default params
|
||||
*/
|
||||
|
||||
#endif
|
|
@ -17,15 +17,5 @@
|
|||
orr \rx, \rx, #0x00000be0
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
strb \rd, [\rx]
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
1001: ldrb \rd, [\rx, #0x14]
|
||||
tst \rd, #0x20
|
||||
beq 1001b
|
||||
.endm
|
||||
#define UART_SHIFT 2
|
||||
#include <asm/hardware/debug-8250.S>
|
||||
|
|
|
@ -1,5 +0,0 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-cl7500/param.h
|
||||
*
|
||||
* Copyright (C) 1999 Nexus Electronics Ltd
|
||||
*/
|
|
@ -1,19 +0,0 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-clps711x/param.h
|
||||
*
|
||||
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
|
@ -16,19 +16,6 @@
|
|||
orr \rx, \rx, #0x00000be0
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
strb \rd, [\rx]
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1002: ldrb \rd, [\rx, #0x14]
|
||||
and \rd, \rd, #0x60
|
||||
teq \rd, #0x60
|
||||
bne 1002b
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
1001: ldrb \rd, [\rx, #0x18]
|
||||
tst \rd, #0x10
|
||||
beq 1001b
|
||||
.endm
|
||||
#define UART_SHIFT 2
|
||||
#define FLOW_CONTROL
|
||||
#include <asm/hardware/debug-8250.h>
|
||||
|
|
|
@ -1,4 +0,0 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ebsa110/param.h
|
||||
*/
|
||||
#define HZ 200
|
|
@ -23,22 +23,10 @@
|
|||
orr \rx, \rx, #0x000003f8
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
strb \rd, [\rx]
|
||||
.endm
|
||||
#define UART_SHIFT 0
|
||||
#define FLOW_CONTROL
|
||||
#include <asm/hardware/debug-8250.S>
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1002: ldrb \rd, [\rx, #0x5]
|
||||
and \rd, \rd, #0x60
|
||||
teq \rd, #0x60
|
||||
bne 1002b
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
1001: ldrb \rd, [\rx, #0x6]
|
||||
tst \rd, #0x10
|
||||
beq 1001b
|
||||
.endm
|
||||
#else
|
||||
/* For EBSA285 debugging */
|
||||
.equ dc21285_high, ARMCSR_BASE & 0xff000000
|
||||
|
|
|
@ -1,3 +0,0 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ebsa285/param.h
|
||||
*/
|
22
include/asm-arm/arch-ep93xx/debug-macro.S
Normal file
22
include/asm-arm/arch-ep93xx/debug-macro.S
Normal file
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/debug-macro.S
|
||||
* Debugging macro include header
|
||||
*
|
||||
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
#include <asm/arch/ep93xx-regs.h>
|
||||
|
||||
.macro addruart,rx
|
||||
mrc p15, 0, \rx, c1, c0
|
||||
tst \rx, #1 @ MMU enabled?
|
||||
ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
|
||||
ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
|
||||
orr \rx, \rx, #0x000c0000
|
||||
.endm
|
||||
|
||||
#include <asm/hardware/debug-pl01x.S>
|
3
include/asm-arm/arch-ep93xx/dma.h
Normal file
3
include/asm-arm/arch-ep93xx/dma.h
Normal file
|
@ -0,0 +1,3 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/dma.h
|
||||
*/
|
53
include/asm-arm/arch-ep93xx/entry-macro.S
Normal file
53
include/asm-arm/arch-ep93xx/entry-macro.S
Normal file
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/entry-macro.S
|
||||
* IRQ demultiplexing for EP93xx
|
||||
*
|
||||
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or (at
|
||||
* your option) any later version.
|
||||
*/
|
||||
#include <asm/arch/ep93xx-regs.h>
|
||||
|
||||
.macro disable_fiq
|
||||
.endm
|
||||
|
||||
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
|
||||
ldr \base, =(EP93XX_AHB_VIRT_BASE)
|
||||
orr \base, \base, #0x000b0000
|
||||
mov \irqnr, #0
|
||||
ldr \irqstat, [\base] @ lower 32 interrupts
|
||||
cmp \irqstat, #0
|
||||
bne 1001f
|
||||
|
||||
eor \base, \base, #0x00070000
|
||||
ldr \irqstat, [\base] @ upper 32 interrupts
|
||||
cmp \irqstat, #0
|
||||
beq 1002f
|
||||
mov \irqnr, #0x20
|
||||
|
||||
1001:
|
||||
movs \tmp, \irqstat, lsl #16
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #16
|
||||
|
||||
movs \tmp, \irqstat, lsl #8
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #8
|
||||
|
||||
movs \tmp, \irqstat, lsl #4
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #4
|
||||
|
||||
movs \tmp, \irqstat, lsl #2
|
||||
movne \irqstat, \tmp
|
||||
addeq \irqnr, \irqnr, #2
|
||||
|
||||
movs \tmp, \irqstat, lsl #1
|
||||
addeq \irqnr, \irqnr, #1
|
||||
orrs \base, \base, #1
|
||||
|
||||
1002:
|
||||
.endm
|
125
include/asm-arm/arch-ep93xx/ep93xx-regs.h
Normal file
125
include/asm-arm/arch-ep93xx/ep93xx-regs.h
Normal file
|
@ -0,0 +1,125 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_EP93XX_REGS_H
|
||||
#define __ASM_ARCH_EP93XX_REGS_H
|
||||
|
||||
/*
|
||||
* EP93xx linux memory map:
|
||||
*
|
||||
* virt phys size
|
||||
* fe800000 5M per-platform mappings
|
||||
* fed00000 80800000 2M APB
|
||||
* fef00000 80000000 1M AHB
|
||||
*/
|
||||
|
||||
#define EP93XX_AHB_PHYS_BASE 0x80000000
|
||||
#define EP93XX_AHB_VIRT_BASE 0xfef00000
|
||||
#define EP93XX_AHB_SIZE 0x00100000
|
||||
|
||||
#define EP93XX_APB_PHYS_BASE 0x80800000
|
||||
#define EP93XX_APB_VIRT_BASE 0xfed00000
|
||||
#define EP93XX_APB_SIZE 0x00200000
|
||||
|
||||
|
||||
/* AHB peripherals */
|
||||
#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
|
||||
|
||||
#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
|
||||
|
||||
#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
|
||||
#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
|
||||
|
||||
#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
|
||||
|
||||
#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
|
||||
|
||||
#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
|
||||
|
||||
#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
|
||||
|
||||
#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
|
||||
|
||||
#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
|
||||
|
||||
#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
|
||||
|
||||
#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
|
||||
|
||||
|
||||
/* APB peripherals */
|
||||
#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
|
||||
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
|
||||
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
|
||||
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
|
||||
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
|
||||
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
|
||||
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
|
||||
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
|
||||
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
|
||||
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
|
||||
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
|
||||
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
|
||||
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
|
||||
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
|
||||
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
|
||||
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
|
||||
|
||||
#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
|
||||
|
||||
#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
|
||||
|
||||
#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
|
||||
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
|
||||
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
|
||||
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
|
||||
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
|
||||
#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
|
||||
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
|
||||
#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
|
||||
#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
|
||||
#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
|
||||
#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
|
||||
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
|
||||
|
||||
#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
|
||||
|
||||
#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
|
||||
|
||||
#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
|
||||
|
||||
#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
|
||||
#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
|
||||
|
||||
#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
|
||||
#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
|
||||
|
||||
#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
|
||||
#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
|
||||
|
||||
#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
|
||||
|
||||
#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
|
||||
#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
|
||||
|
||||
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
|
||||
|
||||
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
|
||||
|
||||
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
|
||||
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
|
||||
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
|
||||
#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
|
||||
#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
|
||||
#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
|
||||
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
|
||||
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
|
||||
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
|
||||
|
||||
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
|
||||
|
||||
|
||||
#endif
|
3
include/asm-arm/arch-ep93xx/gesbc9312.h
Normal file
3
include/asm-arm/arch-ep93xx/gesbc9312.h
Normal file
|
@ -0,0 +1,3 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/gesbc9312.h
|
||||
*/
|
107
include/asm-arm/arch-ep93xx/gpio.h
Normal file
107
include/asm-arm/arch-ep93xx/gpio.h
Normal file
|
@ -0,0 +1,107 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/gpio.h
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_GPIO_H
|
||||
#define __ASM_ARCH_GPIO_H
|
||||
|
||||
#define GPIO_IN 0
|
||||
#define GPIO_OUT 1
|
||||
|
||||
#define EP93XX_GPIO_LOW 0
|
||||
#define EP93XX_GPIO_HIGH 1
|
||||
|
||||
extern void gpio_line_config(int line, int direction);
|
||||
extern int gpio_line_get(int line);
|
||||
extern void gpio_line_set(int line, int value);
|
||||
|
||||
/* GPIO port A. */
|
||||
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
|
||||
#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
|
||||
#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
|
||||
#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
|
||||
#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
|
||||
#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
|
||||
#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
|
||||
#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
|
||||
#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
|
||||
|
||||
/* GPIO port B. */
|
||||
#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
|
||||
#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
|
||||
#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
|
||||
#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
|
||||
#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
|
||||
#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
|
||||
#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
|
||||
#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
|
||||
#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
|
||||
|
||||
/* GPIO port C. */
|
||||
#define EP93XX_GPIO_LINE_C(x) ((x) + 16)
|
||||
#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
|
||||
#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
|
||||
#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
|
||||
#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
|
||||
#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
|
||||
#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
|
||||
#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
|
||||
#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
|
||||
|
||||
/* GPIO port D. */
|
||||
#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
|
||||
#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
|
||||
#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
|
||||
#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
|
||||
#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
|
||||
#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
|
||||
#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
|
||||
#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
|
||||
#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
|
||||
|
||||
/* GPIO port E. */
|
||||
#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
|
||||
#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
|
||||
#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
|
||||
#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
|
||||
#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
|
||||
#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
|
||||
#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
|
||||
#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
|
||||
#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
|
||||
|
||||
/* GPIO port F. */
|
||||
#define EP93XX_GPIO_LINE_F(x) ((x) + 40)
|
||||
#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
|
||||
#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
|
||||
#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
|
||||
#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
|
||||
#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
|
||||
#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
|
||||
#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
|
||||
#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
|
||||
|
||||
/* GPIO port G. */
|
||||
#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
|
||||
#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
|
||||
#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
|
||||
#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
|
||||
#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
|
||||
#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
|
||||
#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
|
||||
#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
|
||||
#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
|
||||
|
||||
/* GPIO port H. */
|
||||
#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
|
||||
#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
|
||||
#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
|
||||
#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
|
||||
#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
|
||||
#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
|
||||
#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
|
||||
#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
|
||||
#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
|
||||
|
||||
|
||||
#endif
|
12
include/asm-arm/arch-ep93xx/hardware.h
Normal file
12
include/asm-arm/arch-ep93xx/hardware.h
Normal file
|
@ -0,0 +1,12 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-ep93xx/hardware.h
|
||||
*/
|
||||
|
||||
#include "ep93xx-regs.h"
|
||||
|
||||
#define pcibios_assign_all_busses() 0
|
||||
|
||||
#include "platform.h"
|
||||
|
||||
#include "gesbc9312.h"
|
||||
#include "ts72xx.h"
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue