Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

USB: HCDs use the do_remote_wakeup flag

Browse source 
When a USB device is suspended, whether or not it is enabled for
remote wakeup depends on the device_may_wakeup() setting.  The setting
is then saved in the do_remote_wakeup flag.

Later on, however, the device_may_wakeup() value can change because of
user activity.  So when testing whether a suspended device is or
should be enabled for remote wakeup, we should always test
do_remote_wakeup instead of device_may_wakeup().  This patch (as1076)
makes that change for root hubs in several places.

The patch also adjusts uhci-hcd so that when an autostopped controller
is suspended, the remote wakeup setting agrees with the value recorded
in the root hub's do_remote_wakeup flag.

And the patch adjusts ehci-hcd so that wakeup events on selectively
suspended ports (i.e., the bus itself isn't suspended) don't turn on
the PME# wakeup signal.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Alan Stern 2008-04-14 12:17:10 -04:00 committed by Greg Kroah-Hartman
parent b950bdbc67
commit 58a97ffeb2
6 changed files with 18 additions and 30 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
drivers/usb/core/driver.c
View file

@ -932,7 +932,6 @@ static int autosuspend_check(struct usb_device *udev, int reschedule)
* is disabled. Also fail if any interfaces require remote wakeup
* but it isn't available.
*/
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->pm_usage_cnt > 0)
return -EBUSY;
if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled)

17
drivers/usb/host/ehci-hub.c
View file

@ -30,6 +30,8 @@
#ifdef CONFIG_PM
#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
static int ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
@ -149,10 +151,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
}
/* enable remote wakeup on all ports */
if (device_may_wakeup(&hcd->self.root_hub->dev))
t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
if (hcd->self.root_hub->do_remote_wakeup)
t2 |= PORT_WAKE_BITS;
else
t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E);
t2 &= ~PORT_WAKE_BITS;
if (t1 != t2) {
ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
@ -174,7 +176,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
/* allow remote wakeup */
mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
ehci_readl(ehci, &ehci->regs->intr_enable);
@ -232,8 +234,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
temp &= ~(PORT_RWC_BITS
| PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
@ -534,8 +535,6 @@ ehci_hub_descriptor (
/*-------------------------------------------------------------------------*/
#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
static int ehci_hub_control (
struct usb_hcd *hcd,
u16 typeReq,
@ -801,8 +800,6 @@ static int ehci_hub_control (
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;
if (device_may_wakeup(&hcd->self.root_hub->dev))
temp |= PORT_WAKE_BITS;
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
break;
case USB_PORT_FEAT_POWER:

2
drivers/usb/host/ehci-pci.c
View file

@ -300,7 +300,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
int mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
ehci_readl(ehci, &ehci->regs->intr_enable);

2
drivers/usb/host/isp116x-hcd.c
View file

@ -1400,7 +1400,7 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd)
spin_unlock_irqrestore(&isp116x->lock, flags);
val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
val |= HCCONTROL_USB_SUSPEND;
if (device_may_wakeup(&hcd->self.root_hub->dev))
if (hcd->self.root_hub->do_remote_wakeup)
val |= HCCONTROL_RWE;
/* Wait for usb transfers to finish */
msleep(2);

5
drivers/usb/host/ohci-hub.c
View file

@ -103,10 +103,9 @@ __acquires(ohci->lock)
finish_unlinks (ohci, ohci_frame_no(ohci));
/* maybe resume can wake root hub */
if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev) ||
autostop)
if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
ohci->hc_control |= OHCI_CTRL_RWE;
else {
} else {
ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
ohci->hc_control &= ~OHCI_CTRL_RWE;
}

21
drivers/usb/host/uhci-hcd.c
View file

@ -262,20 +262,12 @@ __acquires(uhci->lock)
{
int auto_stop;
int int_enable, egsm_enable;
struct usb_device *rhdev = uhci_to_hcd(uhci)->self.root_hub;
auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
"%s%s\n", __FUNCTION__,
dev_dbg(&rhdev->dev, "%s%s\n", __func__,
(auto_stop ? " (auto-stop)" : ""));
/* If we get a suspend request when we're already auto-stopped
* then there's nothing to do.
*/
if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
uhci->rh_state = new_state;
return;
}
/* Enable resume-detect interrupts if they work.
* Then enter Global Suspend mode if _it_ works, still configured.
*/
@ -285,8 +277,10 @@ __acquires(uhci->lock)
if (remote_wakeup_is_broken(uhci))
egsm_enable = 0;
if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable ||
!device_may_wakeup(
&uhci_to_hcd(uhci)->self.root_hub->dev))
#ifdef CONFIG_PM
(!auto_stop && !rhdev->do_remote_wakeup) ||
#endif
(auto_stop && !device_may_wakeup(&rhdev->dev)))
uhci->working_RD = int_enable = 0;
outw(int_enable, uhci->io_addr + USBINTR);
@ -308,8 +302,7 @@ __acquires(uhci->lock)
return;
}
if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev,
"Controller not stopped yet!\n");
dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
uhci_get_current_frame_number(uhci);