[media] v4l: s5p-tv: add sii9234 driver
SiI9234 is a converter of HDMI signal into MHL. The chip is present on some boards from Samsung S5P family. The chip's configuration procedure is based on MHD_SiI9234 driver created by doonsoo45.kim. The driver is using: - i2c framework - v4l2 framework - runtime PM Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Tomasz Stanislawski
Mauro Carvalho Chehab
parent
e861dccc6d
commit
56e1df491b
4 changed files with 468 additions and 0 deletions
|
|
@ -46,6 +46,16 @@ config VIDEO_SAMSUNG_S5P_HDMIPHY
|
|||
as module. It is an I2C driver, that exposes a V4L2
|
||||
subdev for use by other drivers.
|
||||
|
||||
config VIDEO_SAMSUNG_S5P_SII9234
|
||||
tristate "Samsung SII9234 Driver"
|
||||
depends on VIDEO_DEV && VIDEO_V4L2 && I2C
|
||||
depends on VIDEO_SAMSUNG_S5P_TV
|
||||
help
|
||||
Say Y here if you want support for the MHL interface
|
||||
in S5P Samsung SoC. The driver can be compiled
|
||||
as module. It is an I2C driver, that exposes a V4L2
|
||||
subdev for use by other drivers.
|
||||
|
||||
config VIDEO_SAMSUNG_S5P_SDO
|
||||
tristate "Samsung Analog TV Driver"
|
||||
depends on VIDEO_DEV && VIDEO_V4L2
|
||||
|
|
|
|||
|
|
@ -8,6 +8,8 @@
|
|||
|
||||
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o
|
||||
s5p-hdmiphy-y += hdmiphy_drv.o
|
||||
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SII9234) += s5p-sii9234.o
|
||||
s5p-sii9234-y += sii9234_drv.o
|
||||
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o
|
||||
s5p-hdmi-y += hdmi_drv.o
|
||||
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o
|
||||
|
|
|
|||
432
drivers/media/video/s5p-tv/sii9234_drv.c
Normal file
432
drivers/media/video/s5p-tv/sii9234_drv.c
Normal file
|
|
@ -0,0 +1,432 @@
|
|||
/*
|
||||
* Samsung MHL interface driver
|
||||
*
|
||||
* Copyright (C) 2011 Samsung Electronics Co.Ltd
|
||||
* Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/freezer.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kthread.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <mach/gpio.h>
|
||||
#include <plat/gpio-cfg.h>
|
||||
|
||||
#include <media/sii9234.h>
|
||||
#include <media/v4l2-subdev.h>
|
||||
|
||||
MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>");
|
||||
MODULE_DESCRIPTION("Samsung MHL interface driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
struct sii9234_context {
|
||||
struct i2c_client *client;
|
||||
struct regulator *power;
|
||||
int gpio_n_reset;
|
||||
struct v4l2_subdev sd;
|
||||
};
|
||||
|
||||
static inline struct sii9234_context *sd_to_context(struct v4l2_subdev *sd)
|
||||
{
|
||||
return container_of(sd, struct sii9234_context, sd);
|
||||
}
|
||||
|
||||
static inline int sii9234_readb(struct i2c_client *client, int addr)
|
||||
{
|
||||
return i2c_smbus_read_byte_data(client, addr);
|
||||
}
|
||||
|
||||
static inline int sii9234_writeb(struct i2c_client *client, int addr, int value)
|
||||
{
|
||||
return i2c_smbus_write_byte_data(client, addr, value);
|
||||
}
|
||||
|
||||
static inline int sii9234_writeb_mask(struct i2c_client *client, int addr,
|
||||
int value, int mask)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, addr);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = (ret & ~mask) | (value & mask);
|
||||
return i2c_smbus_write_byte_data(client, addr, ret);
|
||||
}
|
||||
|
||||
static inline int sii9234_readb_idx(struct i2c_client *client, int addr)
|
||||
{
|
||||
int ret;
|
||||
ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
return i2c_smbus_read_byte_data(client, 0xbe);
|
||||
}
|
||||
|
||||
static inline int sii9234_writeb_idx(struct i2c_client *client, int addr,
|
||||
int value)
|
||||
{
|
||||
int ret;
|
||||
ret = i2c_smbus_write_byte_data(client, 0xbc, addr >> 8);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = i2c_smbus_write_byte_data(client, 0xbd, addr & 0xff);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = i2c_smbus_write_byte_data(client, 0xbe, value);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline int sii9234_writeb_idx_mask(struct i2c_client *client, int addr,
|
||||
int value, int mask)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = sii9234_readb_idx(client, addr);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = (ret & ~mask) | (value & mask);
|
||||
return sii9234_writeb_idx(client, addr, ret);
|
||||
}
|
||||
|
||||
static int sii9234_reset(struct sii9234_context *ctx)
|
||||
{
|
||||
struct i2c_client *client = ctx->client;
|
||||
struct device *dev = &client->dev;
|
||||
int ret, tries;
|
||||
|
||||
gpio_direction_output(ctx->gpio_n_reset, 1);
|
||||
mdelay(1);
|
||||
gpio_direction_output(ctx->gpio_n_reset, 0);
|
||||
mdelay(1);
|
||||
gpio_direction_output(ctx->gpio_n_reset, 1);
|
||||
mdelay(1);
|
||||
|
||||
/* going to TTPI mode */
|
||||
ret = sii9234_writeb(client, 0xc7, 0);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to set TTPI mode\n");
|
||||
return ret;
|
||||
}
|
||||
for (tries = 0; tries < 100 ; ++tries) {
|
||||
ret = sii9234_readb(client, 0x1b);
|
||||
if (ret > 0)
|
||||
break;
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to reset device\n");
|
||||
return -EIO;
|
||||
}
|
||||
mdelay(1);
|
||||
}
|
||||
if (tries == 100) {
|
||||
dev_err(dev, "maximal number of tries reached\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sii9234_verify_version(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
int family, rev, tpi_rev, dev_id, sub_id, hdcp, id;
|
||||
|
||||
family = sii9234_readb(client, 0x1b);
|
||||
rev = sii9234_readb(client, 0x1c) & 0x0f;
|
||||
tpi_rev = sii9234_readb(client, 0x1d) & 0x7f;
|
||||
dev_id = sii9234_readb_idx(client, 0x0103);
|
||||
sub_id = sii9234_readb_idx(client, 0x0102);
|
||||
hdcp = sii9234_readb(client, 0x30);
|
||||
|
||||
if (family < 0 || rev < 0 || tpi_rev < 0 || dev_id < 0 ||
|
||||
sub_id < 0 || hdcp < 0) {
|
||||
dev_err(dev, "failed to read chip's version\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
id = (dev_id << 8) | sub_id;
|
||||
|
||||
dev_info(dev, "chip: SiL%02x family: %02x, rev: %02x\n",
|
||||
id, family, rev);
|
||||
dev_info(dev, "tpi_rev:%02x, hdcp: %02x\n", tpi_rev, hdcp);
|
||||
if (id != 0x9234) {
|
||||
dev_err(dev, "not supported chip\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static u8 data[][3] = {
|
||||
/* setup from driver created by doonsoo45.kim */
|
||||
{ 0x01, 0x05, 0x04 }, /* Enable Auto soft reset on SCDT = 0 */
|
||||
{ 0x01, 0x08, 0x35 }, /* Power Up TMDS Tx Core */
|
||||
{ 0x01, 0x0d, 0x1c }, /* HDMI Transcode mode enable */
|
||||
{ 0x01, 0x2b, 0x01 }, /* Enable HDCP Compliance workaround */
|
||||
{ 0x01, 0x79, 0x40 }, /* daniel test...MHL_INT */
|
||||
{ 0x01, 0x80, 0x34 }, /* Enable Rx PLL Clock Value */
|
||||
{ 0x01, 0x90, 0x27 }, /* Enable CBUS discovery */
|
||||
{ 0x01, 0x91, 0xe5 }, /* Skip RGND detection */
|
||||
{ 0x01, 0x92, 0x46 }, /* Force MHD mode */
|
||||
{ 0x01, 0x93, 0xdc }, /* Disable CBUS pull-up during RGND measurement */
|
||||
{ 0x01, 0x94, 0x66 }, /* 1.8V CBUS VTH & GND threshold */
|
||||
{ 0x01, 0x95, 0x31 }, /* RGND block & single discovery attempt */
|
||||
{ 0x01, 0x96, 0x22 }, /* use 1K and 2K setting */
|
||||
{ 0x01, 0xa0, 0x10 }, /* SIMG: Term mode */
|
||||
{ 0x01, 0xa1, 0xfc }, /* Disable internal Mobile HD driver */
|
||||
{ 0x01, 0xa3, 0xfa }, /* SIMG: Output Swing default EB, 3x Clk Mult */
|
||||
{ 0x01, 0xa5, 0x80 }, /* SIMG: RGND Hysterisis, 3x mode for Beast */
|
||||
{ 0x01, 0xa6, 0x0c }, /* SIMG: Swing Offset */
|
||||
{ 0x02, 0x3d, 0x3f }, /* Power up CVCC 1.2V core */
|
||||
{ 0x03, 0x00, 0x00 }, /* SIMG: correcting HW default */
|
||||
{ 0x03, 0x11, 0x01 }, /* Enable TxPLL Clock */
|
||||
{ 0x03, 0x12, 0x15 }, /* Enable Tx Clock Path & Equalizer */
|
||||
{ 0x03, 0x13, 0x60 }, /* SIMG: Set termination value */
|
||||
{ 0x03, 0x14, 0xf0 }, /* SIMG: Change CKDT level */
|
||||
{ 0x03, 0x17, 0x07 }, /* SIMG: PLL Calrefsel */
|
||||
{ 0x03, 0x1a, 0x20 }, /* VCO Cal */
|
||||
{ 0x03, 0x22, 0xe0 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x23, 0xc0 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x24, 0xa0 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x25, 0x80 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x26, 0x60 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x27, 0x40 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x28, 0x20 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x29, 0x00 }, /* SIMG: Auto EQ */
|
||||
{ 0x03, 0x31, 0x0b }, /* SIMG: Rx PLL BW value from I2C BW ~ 4MHz */
|
||||
{ 0x03, 0x45, 0x06 }, /* SIMG: DPLL Mode */
|
||||
{ 0x03, 0x4b, 0x06 }, /* SIMG: Correcting HW default */
|
||||
{ 0x03, 0x4c, 0xa0 }, /* Manual zone control */
|
||||
{ 0x03, 0x4d, 0x02 }, /* SIMG: PLL Mode Value (order is important) */
|
||||
};
|
||||
|
||||
static int sii9234_set_internal(struct sii9234_context *ctx)
|
||||
{
|
||||
struct i2c_client *client = ctx->client;
|
||||
int i, ret;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(data); ++i) {
|
||||
int addr = (data[i][0] << 8) | data[i][1];
|
||||
ret = sii9234_writeb_idx(client, addr, data[i][2]);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sii9234_runtime_suspend(struct device *dev)
|
||||
{
|
||||
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
||||
struct sii9234_context *ctx = sd_to_context(sd);
|
||||
struct i2c_client *client = ctx->client;
|
||||
|
||||
dev_info(dev, "suspend start\n");
|
||||
|
||||
sii9234_writeb_mask(client, 0x1e, 3, 3);
|
||||
regulator_disable(ctx->power);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sii9234_runtime_resume(struct device *dev)
|
||||
{
|
||||
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
||||
struct sii9234_context *ctx = sd_to_context(sd);
|
||||
struct i2c_client *client = ctx->client;
|
||||
int ret;
|
||||
|
||||
dev_info(dev, "resume start\n");
|
||||
regulator_enable(ctx->power);
|
||||
|
||||
ret = sii9234_reset(ctx);
|
||||
if (ret)
|
||||
goto fail;
|
||||
|
||||
/* enable tpi */
|
||||
ret = sii9234_writeb_mask(client, 0x1e, 1, 0);
|
||||
if (ret < 0)
|
||||
goto fail;
|
||||
ret = sii9234_set_internal(ctx);
|
||||
if (ret < 0)
|
||||
goto fail;
|
||||
|
||||
return 0;
|
||||
|
||||
fail:
|
||||
dev_err(dev, "failed to resume\n");
|
||||
regulator_disable(ctx->power);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct dev_pm_ops sii9234_pm_ops = {
|
||||
.runtime_suspend = sii9234_runtime_suspend,
|
||||
.runtime_resume = sii9234_runtime_resume,
|
||||
};
|
||||
|
||||
static int sii9234_s_power(struct v4l2_subdev *sd, int on)
|
||||
{
|
||||
struct sii9234_context *ctx = sd_to_context(sd);
|
||||
int ret;
|
||||
|
||||
if (on)
|
||||
ret = pm_runtime_get_sync(&ctx->client->dev);
|
||||
else
|
||||
ret = pm_runtime_put(&ctx->client->dev);
|
||||
/* only values < 0 indicate errors */
|
||||
return IS_ERR_VALUE(ret) ? ret : 0;
|
||||
}
|
||||
|
||||
static int sii9234_s_stream(struct v4l2_subdev *sd, int enable)
|
||||
{
|
||||
struct sii9234_context *ctx = sd_to_context(sd);
|
||||
|
||||
/* (dis/en)able TDMS output */
|
||||
sii9234_writeb_mask(ctx->client, 0x1a, enable ? 0 : ~0 , 1 << 4);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct v4l2_subdev_core_ops sii9234_core_ops = {
|
||||
.s_power = sii9234_s_power,
|
||||
};
|
||||
|
||||
static const struct v4l2_subdev_video_ops sii9234_video_ops = {
|
||||
.s_stream = sii9234_s_stream,
|
||||
};
|
||||
|
||||
static const struct v4l2_subdev_ops sii9234_ops = {
|
||||
.core = &sii9234_core_ops,
|
||||
.video = &sii9234_video_ops,
|
||||
};
|
||||
|
||||
static int __devinit sii9234_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct sii9234_platform_data *pdata = dev->platform_data;
|
||||
struct sii9234_context *ctx;
|
||||
int ret;
|
||||
|
||||
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
|
||||
if (!ctx) {
|
||||
dev_err(dev, "out of memory\n");
|
||||
ret = -ENOMEM;
|
||||
goto fail;
|
||||
}
|
||||
ctx->client = client;
|
||||
|
||||
ctx->power = regulator_get(dev, "hdmi-en");
|
||||
if (IS_ERR(ctx->power)) {
|
||||
dev_err(dev, "failed to acquire regulator hdmi-en\n");
|
||||
ret = PTR_ERR(ctx->power);
|
||||
goto fail_ctx;
|
||||
}
|
||||
|
||||
ctx->gpio_n_reset = pdata->gpio_n_reset;
|
||||
ret = gpio_request(ctx->gpio_n_reset, "MHL_RST");
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to acquire MHL_RST gpio\n");
|
||||
goto fail_power;
|
||||
}
|
||||
|
||||
v4l2_i2c_subdev_init(&ctx->sd, client, &sii9234_ops);
|
||||
|
||||
pm_runtime_enable(dev);
|
||||
|
||||
/* enable device */
|
||||
ret = pm_runtime_get_sync(dev);
|
||||
if (ret)
|
||||
goto fail_pm;
|
||||
|
||||
/* verify chip version */
|
||||
ret = sii9234_verify_version(client);
|
||||
if (ret)
|
||||
goto fail_pm_get;
|
||||
|
||||
/* stop processing */
|
||||
pm_runtime_put(dev);
|
||||
|
||||
dev_info(dev, "probe successful\n");
|
||||
|
||||
return 0;
|
||||
|
||||
fail_pm_get:
|
||||
pm_runtime_put_sync(dev);
|
||||
|
||||
fail_pm:
|
||||
pm_runtime_disable(dev);
|
||||
gpio_free(ctx->gpio_n_reset);
|
||||
|
||||
fail_power:
|
||||
regulator_put(ctx->power);
|
||||
|
||||
fail_ctx:
|
||||
kfree(ctx);
|
||||
|
||||
fail:
|
||||
dev_err(dev, "probe failed\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit sii9234_remove(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||||
struct sii9234_context *ctx = sd_to_context(sd);
|
||||
|
||||
pm_runtime_disable(dev);
|
||||
gpio_free(ctx->gpio_n_reset);
|
||||
regulator_put(ctx->power);
|
||||
kfree(ctx);
|
||||
|
||||
dev_info(dev, "remove successful\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static const struct i2c_device_id sii9234_id[] = {
|
||||
{ "SII9234", 0 },
|
||||
{ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, sii9234_id);
|
||||
static struct i2c_driver sii9234_driver = {
|
||||
.driver = {
|
||||
.name = "sii9234",
|
||||
.owner = THIS_MODULE,
|
||||
.pm = &sii9234_pm_ops,
|
||||
},
|
||||
.probe = sii9234_probe,
|
||||
.remove = __devexit_p(sii9234_remove),
|
||||
.id_table = sii9234_id,
|
||||
};
|
||||
|
||||
static int __init sii9234_init(void)
|
||||
{
|
||||
return i2c_add_driver(&sii9234_driver);
|
||||
}
|
||||
module_init(sii9234_init);
|
||||
|
||||
static void __exit sii9234_exit(void)
|
||||
{
|
||||
i2c_del_driver(&sii9234_driver);
|
||||
}
|
||||
module_exit(sii9234_exit);
|
||||
24
include/media/sii9234.h
Normal file
24
include/media/sii9234.h
Normal file
|
|
@ -0,0 +1,24 @@
|
|||
/*
|
||||
* Driver header for SII9234 MHL converter chip.
|
||||
*
|
||||
* Copyright (c) 2011 Samsung Electronics, Co. Ltd
|
||||
* Contact: Tomasz Stanislawski <t.stanislaws@samsung.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef SII9234_H
|
||||
#define SII9234_H
|
||||
|
||||
/**
|
||||
* @gpio_n_reset: GPIO driving nRESET pin
|
||||
*/
|
||||
|
||||
struct sii9234_platform_data {
|
||||
int gpio_n_reset;
|
||||
};
|
||||
|
||||
#endif /* SII9234_H */
|
||||
Loading…
Reference in a new issue