Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Browse source 
Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...
This commit is contained in:
Linus Torvalds 2012-03-21 18:55:10 -07:00
commit 5375871d43
317 changed files with 11242 additions and 17293 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

63
Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt Normal file
View file

@ -0,0 +1,63 @@
* FSL MPIC Message Registers
This binding specifies what properties must be available in the device tree
representation of the message register blocks found in some FSL MPIC
implementations.
Required properties:
- compatible: Specifies the compatibility list for the message register
block. The type shall be <string-list> and the value shall be of the form
"fsl,mpic-v<version>-msgr", where <version> is the version number of
the MPIC containing the message registers.
- reg: Specifies the base physical address(s) and size(s) of the
message register block's addressable register space. The type shall be
<prop-encoded-array>.
- interrupts: Specifies a list of interrupt-specifiers which are available
for receiving interrupts. Interrupt-specifier consists of two cells: first
cell is interrupt-number and second cell is level-sense. The type shall be
<prop-encoded-array>.
Optional properties:
- mpic-msgr-receive-mask: Specifies what registers in the containing block
are allowed to receive interrupts. The value is a bit mask where a set
bit at bit 'n' indicates that message register 'n' can receive interrupts.
Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
be <u32>. If not present, then all of the message registers in the block
are available.
Aliases:
An alias should be created for every message register block. They are not
required, though. However, a particular implementation of this binding
may require aliases to be present. Aliases are of the form
'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
Numbers shall start at 0.
Example:
aliases {
mpic-msgr-block0 = &mpic_msgr_block0;
mpic-msgr-block1 = &mpic_msgr_block1;
};
mpic_msgr_block0: mpic-msgr-block@41400 {
compatible = "fsl,mpic-v3.1-msgr";
reg = <0x41400 0x200>;
// Message registers 0 and 2 in this block can receive interrupts on
// sources 0xb0 and 0xb2, respectively.
interrupts = <0xb0 2 0xb2 2>;
mpic-msgr-receive-mask = <0x5>;
};
mpic_msgr_block1: mpic-msgr-block@42400 {
compatible = "fsl,mpic-v3.1-msgr";
reg = <0x42400 0x200>;
// Message registers 0 and 2 in this block can receive interrupts on
// sources 0xb4 and 0xb6, respectively.
interrupts = <0xb4 2 0xb6 2>;
mpic-msgr-receive-mask = <0x5>;
};

22
Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
View file

@ -56,7 +56,27 @@ PROPERTIES
to the client. The presence of this property also mandates
that any initialization related to interrupt sources shall
be limited to sources explicitly referenced in the device tree.
- big-endian
Usage: optional
Value type: <empty>
If present the MPIC will be assumed to be big-endian. Some
device-trees omit this property on MPIC nodes even when the MPIC is
in fact big-endian, so certain boards override this property.
- single-cpu-affinity
Usage: optional
Value type: <empty>
If present the MPIC will be assumed to only be able to route
non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC).
- last-interrupt-source
Usage: optional
Value type: <u32>
Some MPICs do not correctly report the number of hardware sources
in the global feature registers. If specified, this field will
override the value read from MPIC_GREG_FEATURE_LAST_SRC.
INTERRUPT SPECIFIER DEFINITION
Interrupt specifiers consists of 4 cells encoded as

6
Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
View file

@ -6,8 +6,10 @@ Required properties:
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
the parent type.
- reg : should contain the address and the length of the shared message
interrupt register set.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
The second region should contain the address of aliased MSIIR register for
platforms that have such an alias.
- msi-available-ranges: use <start count> style section to define which
msi interrupt can be used in the 256 msi interrupts. This property is

270
Documentation/powerpc/firmware-assisted-dump.txt Normal file
View file

@ -0,0 +1,270 @@
Firmware-Assisted Dump
------------------------
July 2011
The goal of firmware-assisted dump is to enable the dump of
a crashed system, and to do so from a fully-reset system, and
to minimize the total elapsed time until the system is back
in production use.
- Firmware assisted dump (fadump) infrastructure is intended to replace
the existing phyp assisted dump.
- Fadump uses the same firmware interfaces and memory reservation model
as phyp assisted dump.
- Unlike phyp dump, fadump exports the memory dump through /proc/vmcore
in the ELF format in the same way as kdump. This helps us reuse the
kdump infrastructure for dump capture and filtering.
- Unlike phyp dump, userspace tool does not need to refer any sysfs
interface while reading /proc/vmcore.
- Unlike phyp dump, fadump allows user to release all the memory reserved
for dump, with a single operation of echo 1 > /sys/kernel/fadump_release_mem.
- Once enabled through kernel boot parameter, fadump can be
started/stopped through /sys/kernel/fadump_registered interface (see
sysfs files section below) and can be easily integrated with kdump
service start/stop init scripts.
Comparing with kdump or other strategies, firmware-assisted
dump offers several strong, practical advantages:
-- Unlike kdump, the system has been reset, and loaded
with a fresh copy of the kernel. In particular,
PCI and I/O devices have been reinitialized and are
in a clean, consistent state.
-- Once the dump is copied out, the memory that held the dump
is immediately available to the running kernel. And therefore,
unlike kdump, fadump doesn't need a 2nd reboot to get back
the system to the production configuration.
The above can only be accomplished by coordination with,
and assistance from the Power firmware. The procedure is
as follows:
-- The first kernel registers the sections of memory with the
Power firmware for dump preservation during OS initialization.
These registered sections of memory are reserved by the first
kernel during early boot.
-- When a system crashes, the Power firmware will save
the low memory (boot memory of size larger of 5% of system RAM
or 256MB) of RAM to the previous registered region. It will
also save system registers, and hardware PTE's.
NOTE: The term 'boot memory' means size of the low memory chunk
that is required for a kernel to boot successfully when
booted with restricted memory. By default, the boot memory
size will be the larger of 5% of system RAM or 256MB.
Alternatively, user can also specify boot memory size
through boot parameter 'fadump_reserve_mem=' which will
override the default calculated size. Use this option
if default boot memory size is not sufficient for second
kernel to boot successfully.
-- After the low memory (boot memory) area has been saved, the
firmware will reset PCI and other hardware state. It will
*not* clear the RAM. It will then launch the bootloader, as
normal.
-- The freshly booted kernel will notice that there is a new
node (ibm,dump-kernel) in the device tree, indicating that
there is crash data available from a previous boot. During
the early boot OS will reserve rest of the memory above
boot memory size effectively booting with restricted memory
size. This will make sure that the second kernel will not
touch any of the dump memory area.
-- User-space tools will read /proc/vmcore to obtain the contents
of memory, which holds the previous crashed kernel dump in ELF
format. The userspace tools may copy this info to disk, or
network, nas, san, iscsi, etc. as desired.
-- Once the userspace tool is done saving dump, it will echo
'1' to /sys/kernel/fadump_release_mem to release the reserved
memory back to general use, except the memory required for
next firmware-assisted dump registration.
e.g.
# echo 1 > /sys/kernel/fadump_release_mem
Please note that the firmware-assisted dump feature
is only available on Power6 and above systems with recent
firmware versions.
Implementation details:
----------------------
During boot, a check is made to see if firmware supports
this feature on that particular machine. If it does, then
we check to see if an active dump is waiting for us. If yes
then everything but boot memory size of RAM is reserved during
early boot (See Fig. 2). This area is released once we finish
collecting the dump from user land scripts (e.g. kdump scripts)
that are run. If there is dump data, then the
/sys/kernel/fadump_release_mem file is created, and the reserved
memory is held.
If there is no waiting dump data, then only the memory required
to hold CPU state, HPTE region, boot memory dump and elfcore
header, is reserved at the top of memory (see Fig. 1). This area
is *not* released: this region will be kept permanently reserved,
so that it can act as a receptacle for a copy of the boot memory
content in addition to CPU state and HPTE region, in the case a
crash does occur.
o Memory Reservation during first kernel
Low memory Top of memory
0 boot memory size |
| | |<--Reserved dump area -->|
V V | Permanent Reservation V
+-----------+----------/ /----------+---+----+-----------+----+
| | |CPU|HPTE| DUMP |ELF |
+-----------+----------/ /----------+---+----+-----------+----+
| ^
| |
\ /
-------------------------------------------
Boot memory content gets transferred to
reserved area by firmware at the time of
crash
Fig. 1
o Memory Reservation during second kernel after crash
Low memory Top of memory
0 boot memory size |
| |<------------- Reserved dump area ----------- -->|
V V V
+-----------+----------/ /----------+---+----+-----------+----+
| | |CPU|HPTE| DUMP |ELF |
+-----------+----------/ /----------+---+----+-----------+----+
| |
V V
Used by second /proc/vmcore
kernel to boot
Fig. 2
Currently the dump will be copied from /proc/vmcore to a
a new file upon user intervention. The dump data available through
/proc/vmcore will be in ELF format. Hence the existing kdump
infrastructure (kdump scripts) to save the dump works fine with
minor modifications.
The tools to examine the dump will be same as the ones
used for kdump.
How to enable firmware-assisted dump (fadump):
-------------------------------------
1. Set config option CONFIG_FA_DUMP=y and build kernel.
2. Boot into linux kernel with 'fadump=on' kernel cmdline option.
3. Optionally, user can also set 'fadump_reserve_mem=' kernel cmdline
to specify size of the memory to reserve for boot memory dump
preservation.
NOTE: If firmware-assisted dump fails to reserve memory then it will
fallback to existing kdump mechanism if 'crashkernel=' option
is set at kernel cmdline.
Sysfs/debugfs files:
------------
Firmware-assisted dump feature uses sysfs file system to hold
the control files and debugfs file to display memory reserved region.
Here is the list of files under kernel sysfs:
/sys/kernel/fadump_enabled
This is used to display the fadump status.
0 = fadump is disabled
1 = fadump is enabled
This interface can be used by kdump init scripts to identify if
fadump is enabled in the kernel and act accordingly.
/sys/kernel/fadump_registered
This is used to display the fadump registration status as well
as to control (start/stop) the fadump registration.
0 = fadump is not registered.
1 = fadump is registered and ready to handle system crash.
To register fadump echo 1 > /sys/kernel/fadump_registered and
echo 0 > /sys/kernel/fadump_registered for un-register and stop the
fadump. Once the fadump is un-registered, the system crash will not
be handled and vmcore will not be captured. This interface can be
easily integrated with kdump service start/stop.
/sys/kernel/fadump_release_mem
This file is available only when fadump is active during
second kernel. This is used to release the reserved memory
region that are held for saving crash dump. To release the
reserved memory echo 1 to it:
echo 1 > /sys/kernel/fadump_release_mem
After echo 1, the content of the /sys/kernel/debug/powerpc/fadump_region
file will change to reflect the new memory reservations.
The existing userspace tools (kdump infrastructure) can be easily
enhanced to use this interface to release the memory reserved for
dump and continue without 2nd reboot.
Here is the list of files under powerpc debugfs:
(Assuming debugfs is mounted on /sys/kernel/debug directory.)
/sys/kernel/debug/powerpc/fadump_region
This file shows the reserved memory regions if fadump is
enabled otherwise this file is empty. The output format
is:
<region>: [<start>-<end>] <reserved-size> bytes, Dumped: <dump-size>
e.g.
Contents when fadump is registered during first kernel
# cat /sys/kernel/debug/powerpc/fadump_region
CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x0
HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x0
DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x0
Contents when fadump is active during second kernel
# cat /sys/kernel/debug/powerpc/fadump_region
CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x40020
HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x1000
DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x10000000
: [0x00000010000000-0x0000006ffaffff] 0x5ffb0000 bytes, Dumped: 0x5ffb0000
NOTE: Please refer to Documentation/filesystems/debugfs.txt on
how to mount the debugfs filesystem.
TODO:
-----
o Need to come up with the better approach to find out more
accurate boot memory size that is required for a kernel to
boot successfully when booted with restricted memory.
o The fadump implementation introduces a fadump crash info structure
in the scratch area before the ELF core header. The idea of introducing
this structure is to pass some important crash info data to the second
kernel which will help second kernel to populate ELF core header with
correct data before it gets exported through /proc/vmcore. The current
design implementation does not address a possibility of introducing
additional fields (in future) to this structure without affecting
compatibility. Need to come up with the better approach to address this.
The possible approaches are:
1. Introduce version field for version tracking, bump up the version
whenever a new field is added to the structure in future. The version
field can be used to find out what fields are valid for the current
version of the structure.
2. Reserve the area of predefined size (say PAGE_SIZE) for this
structure and have unused area as reserved (initialized to zero)
for future field additions.
The advantage of approach 1 over 2 is we don't need to reserve extra space.
---
Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
This document is based on the original documentation written for phyp
assisted dump by Linas Vepstas and Manish Ahuja.

12
Documentation/powerpc/mpc52xx.txt
View file

@ -2,7 +2,7 @@ Linux 2.6.x on MPC52xx family
-----------------------------
For the latest info, go to http://www.246tNt.com/mpc52xx/
To compile/use :
- U-Boot:
@ -10,23 +10,23 @@ To compile/use :
if you wish to ).
# make lite5200_defconfig
# make uImage
then, on U-boot:
=> tftpboot 200000 uImage
=> tftpboot 400000 pRamdisk
=> bootm 200000 400000
- DBug:
# <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
if you wish to ).
# make lite5200_defconfig
# cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
# make zImage.initrd
# make
# make zImage.initrd
# make
then in DBug:
DBug> dn -i zImage.initrd.lite5200
Some remarks :
- The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100

127
Documentation/powerpc/phyp-assisted-dump.txt
View file

@ -1,127 +0,0 @@
Hypervisor-Assisted Dump
------------------------
November 2007
The goal of hypervisor-assisted dump is to enable the dump of
a crashed system, and to do so from a fully-reset system, and
to minimize the total elapsed time until the system is back
in production use.
As compared to kdump or other strategies, hypervisor-assisted
dump offers several strong, practical advantages:
-- Unlike kdump, the system has been reset, and loaded
with a fresh copy of the kernel. In particular,
PCI and I/O devices have been reinitialized and are
in a clean, consistent state.
-- As the dump is performed, the dumped memory becomes
immediately available to the system for normal use.
-- After the dump is completed, no further reboots are
required; the system will be fully usable, and running
in its normal, production mode on its normal kernel.
The above can only be accomplished by coordination with,
and assistance from the hypervisor. The procedure is
as follows:
-- When a system crashes, the hypervisor will save
the low 256MB of RAM to a previously registered
save region. It will also save system state, system
registers, and hardware PTE's.
-- After the low 256MB area has been saved, the
hypervisor will reset PCI and other hardware state.
It will *not* clear RAM. It will then launch the
bootloader, as normal.
-- The freshly booted kernel will notice that there
is a new node (ibm,dump-kernel) in the device tree,
indicating that there is crash data available from
a previous boot. It will boot into only 256MB of RAM,
reserving the rest of system memory.
-- Userspace tools will parse /sys/kernel/release_region
and read /proc/vmcore to obtain the contents of memory,
which holds the previous crashed kernel. The userspace
tools may copy this info to disk, or network, nas, san,
iscsi, etc. as desired.
For Example: the values in /sys/kernel/release-region
would look something like this (address-range pairs).
CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
-- As the userspace tools complete saving a portion of
dump, they echo an offset and size to
/sys/kernel/release_region to release the reserved
memory back to general use.
An example of this is:
"echo 0x40000000 0x10000000 > /sys/kernel/release_region"
which will release 256MB at the 1GB boundary.
Please note that the hypervisor-assisted dump feature
is only available on Power6-based systems with recent
firmware versions.
Implementation details:
----------------------
During boot, a check is made to see if firmware supports
this feature on this particular machine. If it does, then
we check to see if a active dump is waiting for us. If yes
then everything but 256 MB of RAM is reserved during early
boot. This area is released once we collect a dump from user
land scripts that are run. If there is dump data, then
the /sys/kernel/release_region file is created, and
the reserved memory is held.
If there is no waiting dump data, then only the highest
256MB of the ram is reserved as a scratch area. This area
is *not* released: this region will be kept permanently
reserved, so that it can act as a receptacle for a copy
of the low 256MB in the case a crash does occur. See,
however, "open issues" below, as to whether
such a reserved region is really needed.
Currently the dump will be copied from /proc/vmcore to a
a new file upon user intervention. The starting address
to be read and the range for each data point in provided
in /sys/kernel/release_region.
The tools to examine the dump will be same as the ones
used for kdump.
General notes:
--------------
Security: please note that there are potential security issues
with any sort of dump mechanism. In particular, plaintext
(unencrypted) data, and possibly passwords, may be present in
the dump data. Userspace tools must take adequate precautions to
preserve security.
Open issues/ToDo:
------------
o The various code paths that tell the hypervisor that a crash
occurred, vs. it simply being a normal reboot, should be
reviewed, and possibly clarified/fixed.
o Instead of using /sys/kernel, should there be a /sys/dump
instead? There is a dump_subsys being created by the s390 code,
perhaps the pseries code should use a similar layout as well.
o Is reserving a 256MB region really required? The goal of
reserving a 256MB scratch area is to make sure that no
important crash data is clobbered when the hypervisor
save low mem to the scratch area. But, if one could assure
that nothing important is located in some 256MB area, then
it would not need to be reserved. Something that can be
improved in subsequent versions.
o Still working the kdump team to integrate this with kdump,
some work remains but this would not affect the current
patches.
o Still need to write a shell script, to copy the dump away.
Currently I am parsing it manually.

2
MAINTAINERS
View file

@ -4071,7 +4071,7 @@ M: Josh Boyer <jwboyer@gmail.com>
M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
T: git git://git.infradead.org/users/jwboyer/powerpc-4xx.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
F: arch/powerpc/platforms/40x/
F: arch/powerpc/platforms/44x/

18
arch/powerpc/Kconfig
View file

@ -134,6 +134,7 @@ config PPC
select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select SPARSE_IRQ
select IRQ_PER_CPU
select IRQ_DOMAIN
select GENERIC_IRQ_SHOW
@ -377,13 +378,16 @@ config CRASH_DUMP
The same kernel binary can be used as production kernel and dump
capture kernel.
config PHYP_DUMP
bool "Hypervisor-assisted dump (EXPERIMENTAL)"
depends on PPC_PSERIES && EXPERIMENTAL
config FA_DUMP
bool "Firmware-assisted dump"
depends on PPC64 && PPC_RTAS && CRASH_DUMP
help
Hypervisor-assisted dump is meant to be a kdump replacement
offering robustness and speed not possible without system
hypervisor assistance.
A robust mechanism to get reliable kernel crash dump with
assistance from firmware. This approach does not use kexec,
instead firmware assists in booting the kdump kernel
while preserving memory contents. Firmware-assisted dump
is meant to be a kdump replacement offering robustness and
speed not possible without system firmware assistance.
If unsure, say "N"
@ -612,7 +616,7 @@ endmenu
config ISA_DMA_API
bool
default !PPC_ISERIES || PCI
default PCI
menu "Bus options"

7
arch/powerpc/Kconfig.debug
View file

@ -196,13 +196,6 @@ config PPC_EARLY_DEBUG_MAPLE
help
Select this to enable early debugging for Maple.
config PPC_EARLY_DEBUG_ISERIES
bool "iSeries HV Console"
depends on PPC_ISERIES
help
Select this to enable early debugging for legacy iSeries. You need
to hit "Ctrl-x Ctrl-x" to see the messages on the console.
config PPC_EARLY_DEBUG_PAS_REALMODE
bool "PA Semi real mode"
depends on PPC_PASEMI

1
arch/powerpc/Makefile
View file

@ -157,6 +157,7 @@ core-y += arch/powerpc/kernel/ \
arch/powerpc/net/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_KVM) += arch/powerpc/kvm/
core-$(CONFIG_PERF_EVENTS) += arch/powerpc/perf/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/

11
arch/powerpc/boot/Makefile
View file

@ -184,7 +184,6 @@ image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
@ -247,7 +246,7 @@ image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
cuImage.mpc8548cds \
cuImage.mpc8548cds_32b \
cuImage.mpc8555cds
image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds
image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
@ -311,12 +310,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
$(obj)/vmlinux.strip: vmlinux
$(STRIP) -s -R .comment $< -o $@
# The iseries hypervisor won't take an ET_DYN executable, so this
# changes the type (byte 17) in the file to ET_EXEC (2).
$(obj)/zImage.iseries: vmlinux
$(STRIP) -s -R .comment $< -o $@
printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
@ -364,7 +357,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
# anything not in $(targets)
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
zImage.miboot zImage.pmac zImage.pseries \
zImage.maple simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper

168
arch/powerpc/boot/dts/a4m072.dts Normal file
View file

@ -0,0 +1,168 @@
/*
* a4m072 board Device Tree Source
*
* Copyright (C) 2011 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* Copyright (C) 2007 Semihalf
* Marian Balakowicz <m8@semihalf.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
/ {
model = "anonymous,a4m072";
compatible = "anonymous,a4m072";
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; /* From boot loader */
system-frequency = <0>; /* From boot loader */
cdm@200 {
fsl,init-ext-48mhz-en = <0x0>;
fsl,init-fd-enable = <0x01>;
fsl,init-fd-counters = <0x3333>;
};
timer@600 {
fsl,has-wdt;
};
gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
gpio-controller;
#gpio-cells = <2>;
};
gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
status = "disabled";
};
psc@2000 {
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
psc@2200 {
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
};
psc@2400 {
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
psc@2600 {
status = "disabled";
};
psc@2800 {
status = "disabled";
};
psc@2c00 {
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
phy0: ethernet-phy@1f {
reg = <0x1f>;
interrupts = <1 2 0>; /* IRQ 2 active low */
};
};
i2c@3d00 {
status = "disabled";
};
i2c@3d40 {
hwmon@2e {
compatible = "nsc,lm87";
reg = <0x2e>;
};
rtc@51 {
compatible = "nxp,rtc8564";
reg = <0x51>;
};
};
};
localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfe000000 0x02000000
1 0 0x62000000 0x00400000
2 0 0x64000000 0x00200000
3 0 0x66000000 0x01000000
6 0 0x68000000 0x01000000
7 0 0x6a000000 0x00000004>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x02000000>;
bank-width = <2>;
#size-cells = <1>;
#address-cells = <1>;
};
sram0@1,0 {
compatible = "mtd-ram";
reg = <1 0x00000 0x00400000>;
bank-width = <2>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x16 */
0xc000 0 0 1 &mpc5200_pic 1 3 3
0xc000 0 0 2 &mpc5200_pic 1 3 3
0xc000 0 0 3 &mpc5200_pic 1 3 3
0xc000 0 0 4 &mpc5200_pic 1 3 3>;
clock-frequency = <0>; /* From boot loader */
interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
};

127
arch/powerpc/boot/dts/bluestone.dts
View file

@ -33,7 +33,7 @@
aliases {
ethernet0 = &EMAC0;
serial0 = &UART0;
//serial1 = &UART1; --gcl missing UART1 label
serial1 = &UART1;
};
cpus {
@ -52,7 +52,7 @@
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
//next-level-cache = <&L2C0>; --gcl missing L2C0 label
next-level-cache = <&L2C0>;
};
};
@ -117,6 +117,16 @@
dcr-reg = <0x00c 0x002>;
};
L2C0: l2c {
compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
dcr-reg = <0x020 0x008
0x030 0x008>;
cache-line-size = <32>;
cache-size = <262144>;
interrupt-parent = <&UIC1>;
interrupts = <11 1>;
};
plb {
compatible = "ibm,plb4";
#address-cells = <2>;
@ -182,6 +192,53 @@
reg = <0x001a0000 0x00060000>;
};
};
ndfc@1,0 {
compatible = "ibm,ndfc";
reg = <0x00000003 0x00000000 0x00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
#address-cells = <1>;
#size-cells = <1>;
/* 2Gb Nand Flash */
nand {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "firmware";
reg = <0x00000000 0x00C00000>;
};
partition@c00000 {
label = "environment";
reg = <0x00C00000 0x00B00000>;
};
partition@1700000 {
label = "kernel";
reg = <0x01700000 0x00E00000>;
};
partition@2500000 {
label = "root";
reg = <0x02500000 0x08200000>;
};
partition@a700000 {
label = "device-tree";
reg = <0x0A700000 0x00B00000>;
};
partition@b200000 {
label = "config";
reg = <0x0B200000 0x00D00000>;
};
partition@bf00000 {
label = "diag";
reg = <0x0BF00000 0x00C00000>;
};
partition@cb00000 {
label = "vendor";
reg = <0x0CB00000 0x3500000>;
};
};
};
};
UART0: serial@ef600300 {
@ -195,11 +252,36 @@
interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600400 0x00000008>;
virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic";
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "stm,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC0>;
interrupts = <0x9 0x8>;
};
sttm@4C {
compatible = "adm,adm1032";
reg = <0x4C>;
interrupt-parent = <&UIC1>;
interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
};
};
IIC1: i2c@ef600800 {
@ -250,5 +332,46 @@
};
};
PCIE0: pciex@d00000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
0x0000000c 0x08010000 0x00001000>; /* Registers */
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
};
};

4
arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
View file

@ -202,7 +202,7 @@
/include/ "pq3-etsec1-timer-0.dtsi"
usb@22000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
@ -210,7 +210,7 @@
};
usb@23000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;

16
arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
View file

@ -89,6 +89,21 @@
};
};
&rio {
compatible = "fsl,srio";
interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
@ -134,6 +149,7 @@
/include/ "pq3-sec2.1-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-rmu-0.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8548-guts";

4
arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
View file

@ -43,7 +43,9 @@
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet2;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;

3
arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
View file

@ -156,6 +156,9 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
compatible = "fsl,p1010-esdhc", "fsl,esdhc";

6
arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
View file

@ -142,7 +142,13 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-usb2-dr-1.dtsi"
usb@23000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {

7
arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
View file

@ -142,8 +142,15 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
sdhci,auto-cmd12;
};
/include/ "pq3-sec3.3-0.dtsi"
/include/ "pq3-mpic.dtsi"

12
arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
View file

@ -35,7 +35,11 @@
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
/*
* The localbus on the P1022 is not a simple-bus because of the eLBC
* pin muxing when the DIU is enabled.
*/
compatible = "fsl,p1022-elbc", "fsl,elbc";
interrupts = <19 2 0 0>;
};
@ -199,7 +203,13 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-usb2-dr-1.dtsi"
usb@23000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {

3
arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
View file

@ -142,6 +142,9 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
crypto: crypto@300000 {
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";

3
arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
View file

@ -171,6 +171,9 @@
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
};
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"

2
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
View file

@ -309,12 +309,14 @@
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};

2
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
View file

@ -336,12 +336,14 @@
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};

6
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
View file

@ -291,6 +291,12 @@
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb@210000 {
compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb@211000 {
compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
};
/include/ "qoriq-sec4.1-0.dtsi"
};

2
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
View file

@ -339,12 +339,14 @@
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
dr_mode = "host";
phy_type = "utmi";
};

3
arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
View file

@ -1,7 +1,7 @@
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@ -41,6 +41,7 @@ ethernet@24000 {
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};

3
arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
View file

@ -1,7 +1,7 @@
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@ -41,6 +41,7 @@ ethernet@25000 {
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};

3
arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
View file

@ -1,7 +1,7 @@
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@ -41,6 +41,7 @@ ethernet@26000 {
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};

3
arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
View file

@ -1,7 +1,7 @@
/*
* PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@ -41,6 +41,7 @@ ethernet@27000 {
compatible = "gianfar";
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
};

3
arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
View file

@ -39,6 +39,9 @@ mpic: pic@40000 {
reg = <0x40000 0x40000>;
compatible = "fsl,mpic";
device_type = "open-pic";
big-endian;
single-cpu-affinity;
last-interrupt-source = <255>;
};
timer@41100 {

10
arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
View file

@ -33,32 +33,32 @@
*/
crypto@30000 {
compatible = "fsl,sec4.4", "fsl,sec4.0";
compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30000 0x10000>;
interrupts = <58 2 0 0>;
sec_jr0: jr@1000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <45 2 0 0>;
};
sec_jr3: jr@4000 {
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <45 2 0 0>;
};

6
arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
View file

@ -53,7 +53,7 @@ timer@41100 {
msi0: msi@41600 {
compatible = "fsl,mpic-msi";
reg = <0x41600 0x200>;
reg = <0x41600 0x200 0x44140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0 0 0
@ -68,7 +68,7 @@ msi0: msi@41600 {
msi1: msi@41800 {
compatible = "fsl,mpic-msi";
reg = <0x41800 0x200>;
reg = <0x41800 0x200 0x45140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe8 0 0 0
@ -83,7 +83,7 @@ msi1: msi@41800 {
msi2: msi@41a00 {
compatible = "fsl,mpic-msi";
reg = <0x41a00 0x200>;
reg = <0x41a00 0x200 0x46140 4>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xf0 0 0 0

255
arch/powerpc/boot/dts/ge_imp3a.dts Normal file
View file

@ -0,0 +1,255 @@
/*
* GE IMP3A Device Tree Source
*
* Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Based on: P2020 DS Device Tree Source
* Copyright 2009 Freescale Semiconductor Inc.
*/
/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "GE_IMP3A";
compatible = "ge,imp3a";
memory {
device_type = "memory";
};
lbc: localbus@fef05000 {
reg = <0 0xfef05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xff000000 0x01000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xe8000000 0x08000000
0x3 0x0 0x0 0xfc100000 0x00020000
0x4 0x0 0x0 0xfc000000 0x00008000
0x5 0x0 0x0 0xfc008000 0x00008000
0x6 0x0 0x0 0xfee00000 0x00040000
0x7 0x0 0x0 0xfee80000 0x00040000>;
/* nor@0,0 is a mirror of part of the memory in nor@1,0
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "firmware";
reg = <0x0 0x1000000>;
read-only;
};
};
*/
nor@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ge,imp3a-paged-flash", "cfi-flash";
reg = <0x1 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "user";
reg = <0x0 0x7800000>;
};
partition@7800000 {
label = "firmware";
reg = <0x7800000 0x800000>;
read-only;
};
};
nvram@3,0 {
device_type = "nvram";
compatible = "simtek,stk14ca8";
reg = <0x3 0x0 0x20000>;
};
fpga@4,0 {
compatible = "ge,imp3a-fpga-regs";
reg = <0x4 0x0 0x20>;
};
gef_pic: pic@4,20 {
#interrupt-cells = <1>;
interrupt-controller;
device_type = "interrupt-controller";
compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
reg = <0x4 0x20 0x20>;
interrupts = <6 7 0 0>;
};
gef_gpio: gpio@4,400 {
#gpio-cells = <2>;
compatible = "ge,imp3a-gpio";
reg = <0x4 0x400 0x24>;
gpio-controller;
};
wdt@4,800 {
compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
"gef,fpga-wdt";
reg = <0x4 0x800 0x8>;
interrupts = <10 4>;
interrupt-parent = <&gef_pic>;
};
/* Second watchdog available, driver currently supports one.
wdt@4,808 {
compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
"gef,fpga-wdt";
reg = <0x4 0x808 0x8>;
interrupts = <9 4>;
interrupt-parent = <&gef_pic>;
};
*/
nand@6,0 {
compatible = "fsl,elbc-fcm-nand";
reg = <0x6 0x0 0x40000>;
};
nand@7,0 {
compatible = "fsl,elbc-fcm-nand";
reg = <0x7 0x0 0x40000>;
};
};
soc: soc@fef00000 {
ranges = <0x0 0 0xfef00000 0x100000>;
i2c@3000 {
hwmon@48 {
compatible = "national,lm92";
reg = <0x48>;
};
hwmon@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
rtc@51 {
compatible = "epson,rx8581";
reg = <0x51>;
};
eti@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
};
usb@22000 {
phy_type = "ulpi";
dr_mode = "host";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0xc 0x4>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&gef_pic>;
interrupts = <0xb 0x4>;
reg = <0x2>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
status = "disabled";
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "gmii";
};
enet2: ethernet@26000 {
status = "disabled";
};
};
pci0: pcie@fef08000 {
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
reg = <0 0xfef08000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
};
pci1: pcie@fef09000 {
reg = <0 0xfef09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
};
pci2: pcie@fef0a000 {
reg = <0 0xfef0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
};
};
/include/ "fsl/p2020si-post.dtsi"

4
arch/powerpc/boot/dts/mpc836x_mds.dts
View file

@ -405,6 +405,10 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi-phy@2 {
device_type = "tbi-phy";
reg = <0x2>;
};
};
qeic: interrupt-controller@80 {

6
arch/powerpc/boot/dts/mpc8536ds.dts
View file

@ -1,7 +1,7 @@
/*
* MPC8536 DS Device Tree Source
*
* Copyright 2008 Freescale Semiconductor, Inc.
* Copyright 2008, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -34,6 +34,10 @@
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
0x3 0x0 0x0 0xffdf0000 0x00008000>;
};
board_soc: soc: soc@ffe00000 {

93
arch/powerpc/boot/dts/mpc8536ds.dtsi
View file

@ -32,6 +32,99 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "fs-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00080000>;
label = "dtb-nor";
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8536-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "fs-nand";
};
partition@12000000 {
reg = <0x12000000 0x08000000>;
label = "ramdisk-nand";
};
partition@1a000000 {
reg = <0x1a000000 0x04000000>;
label = "kernel-nand";
};
partition@1e000000 {
reg = <0x1e000000 0x01000000>;
label = "dtb-nand";
};
partition@1f000000 {
reg = <0x1f000000 0x21000000>;
label = "empty-nand";
};
};
board-control@3,0 {
compatible = "fsl,mpc8536ds-fpga-pixis";
reg = <0x3 0x0 0x8000>;
};
};
&board_soc {
i2c@3100 {
rtc@68 {

8
arch/powerpc/boot/dts/mpc8536ds_36b.dts
View file

@ -1,7 +1,7 @@
/*
* MPC8536DS Device Tree Source (36-bit address map)
*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
* Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -33,7 +33,11 @@
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x2 0x0 0xf 0xffa00000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
};
board_soc: soc: soc@fffe00000 {

306
arch/powerpc/boot/dts/mpc8548cds.dts
View file

@ -1,306 +0,0 @@
/*
* MPC8548 CDS Device Tree Source
*
* Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
lbc: localbus@e0005000 {
reg = <0 0xe0005000 0 0x1000>;
};
soc: soc8548@e0000000 {
ranges = <0 0x0 0xe0000000 0x100000>;
i2c@3000 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@56 {
compatible = "atmel,24c64";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
i2c@3100 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
pci0: pci@e0008000 {
reg = <0 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x80000>;
clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0x2000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
};
};
};
pci1: pci@e0009000 {
reg = <0 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
reg = <0 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/mpc8548si-post.dtsi"

306
arch/powerpc/boot/dts/mpc8548cds.dtsi Normal file
View file

@ -0,0 +1,306 @@
/*
* MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x01000000>;
bank-width = <2>;
device-width = <2>;
partition@0 {
reg = <0x0 0x0b00000>;
label = "ramdisk-nor";
};
partition@300000 {
reg = <0x0b00000 0x0400000>;
label = "kernel-nor";
};
partition@700000 {
reg = <0x0f00000 0x060000>;
label = "dtb-nor";
};
partition@760000 {
reg = <0x0f60000 0x020000>;
label = "env-nor";
read-only;
};
partition@780000 {
reg = <0x0f80000 0x080000>;
label = "u-boot-nor";
read-only;
};
};
board-control@1,0 {
compatible = "fsl,mpc8548cds-fpga";
reg = <0x1 0x0 0x1000>;
};
};
&board_soc {
i2c@3000 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@56 {
compatible = "atmel,24c64";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
i2c@3100 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
&board_pci0 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x80000>;
clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0x2000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
};
};
};

86
arch/powerpc/boot/dts/mpc8548cds_32b.dts Normal file
View file

@ -0,0 +1,86 @@
/*
* MPC8548 CDS Device Tree Source (32-bit address map)
*
* Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
board_lbc: lbc: localbus@e0005000 {
reg = <0 0xe0005000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xff000000 0x01000000
0x1 0x0 0x0 0xf8004000 0x00001000>;
};
board_soc: soc: soc8548@e0000000 {
ranges = <0 0x0 0xe0000000 0x100000>;
};
board_pci0: pci0: pci@e0008000 {
reg = <0 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
};
pci1: pci@e0009000 {
reg = <0 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
reg = <0 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
rio: rapidio@e00c0000 {
reg = <0x0 0xe00c0000 0x0 0x20000>;
port1 {
ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
};
};
};
/*
* mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask.
*/
/include/ "fsl/mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"

86
arch/powerpc/boot/dts/mpc8548cds_36b.dts Normal file
View file

@ -0,0 +1,86 @@
/*
* MPC8548 CDS Device Tree Source (36-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
board_lbc: lbc: localbus@fe0005000 {
reg = <0xf 0xe0005000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xff000000 0x01000000
0x1 0x0 0xf 0xf8004000 0x00001000>;
};
board_soc: soc: soc8548@fe0000000 {
ranges = <0 0xf 0xe0000000 0x100000>;
};
board_pci0: pci0: pci@fe0008000 {
reg = <0xf 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
};
pci1: pci@fe0009000 {
reg = <0xf 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@fe000a000 {
reg = <0xf 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
rio: rapidio@fe00c0000 {
reg = <0xf 0xe00c0000 0x0 0x20000>;
port1 {
ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
};
};
};
/*
* mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask.
*/
/include/ "fsl/mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"

50
arch/powerpc/boot/dts/mpc8572ds.dtsi
View file

@ -41,37 +41,47 @@
bank-width = <2>;
device-width = <1>;
ramdisk@0 {
partition@0 {
reg = <0x0 0x03000000>;
read-only;
label = "ramdisk-nor";
};
diagnostic@3000000 {
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
dink@3e00000 {
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
kernel@4000000 {
partition@4000000 {
reg = <0x04000000 0x00400000>;
read-only;
label = "kernel-nor";
};
jffs2@4400000 {
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "fs-nor";
};
dtb@7f00000 {
reg = <0x07f00000 0x00080000>;
partition@7f00000 {
reg = <0x07f00000 0x00060000>;
label = "dtb-nor";
};
partition@7f60000 {
reg = <0x07f60000 0x00020000>;
label = "env-nor";
read-only;
};
u-boot@7f80000 {
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
@ -83,31 +93,35 @@
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
u-boot@0 {
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
jffs2@2000000 {
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "fs-nand";
};
ramdisk@12000000 {
partition@12000000 {
reg = <0x12000000 0x08000000>;
read-only;
label = "ramdisk-nand";
};
kernel@1a000000 {
partition@1a000000 {
reg = <0x1a000000 0x04000000>;
label = "kernel-nand";
};
dtb@1e000000 {
partition@1e000000 {
reg = <0x1e000000 0x01000000>;
read-only;
label = "dtb-nand";
};
empty@1f000000 {
partition@1f000000 {
reg = <0x1f000000 0x21000000>;
label = "empty-nand";
};
};

4
arch/powerpc/boot/dts/p1010rdb.dtsi
View file

@ -138,7 +138,7 @@
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
spi-max-frequency = <40000000>;
partition@0 {
/* 1MB for u-boot Bootloader Image */
@ -196,7 +196,7 @@
};
tbi-phy@3 {
device-type = "tbi-phy";
device_type = "tbi-phy";
reg = <0x3>;
};
};

247
arch/powerpc/boot/dts/p1020rdb-pc.dtsi Normal file
View file

@ -0,0 +1,247 @@
/*
* P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
cpld@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cpld";
reg = <0x3 0x0 0x20000>;
read-only;
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "u-boot";
read-only;
};
partition@dtb {
/* 512KB for DTB Image*/
reg = <0x00080000 0x00080000>;
label = "dtb";
};
partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "kernel";
};
partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "file system";
};
partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "file system jffs2";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
/* USB2 is shared with localbus, so it must be disabled
by default. We can't put 'status = "disabled";' here
since U-Boot doesn't clear the status property when
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
usb@23000 {
phy_type = "ulpi";
};
*/
mdio@24000 {
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
device_type = "tbi-phy";
reg = <0x11>;
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};

90
arch/powerpc/boot/dts/p1020rdb-pc_32b.dts Normal file
View file

@ -0,0 +1,90 @@
/*
* P1020 RDB-PC Device Tree Source (32-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000
0x3 0x0 0x0 0xffa00000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1020rdb-pc.dtsi"
/include/ "fsl/p1020si-post.dtsi"

90
arch/powerpc/boot/dts/p1020rdb-pc_36b.dts Normal file
View file

@ -0,0 +1,90 @@
/*
* P1020 RDB-PC Device Tree Source (36-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000
0x2 0x0 0xf 0xffb00000 0x00040000
0x3 0x0 0xf 0xffa00000 0x00020000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1020rdb-pc.dtsi"
/include/ "fsl/p1020si-post.dtsi"

64
arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts Normal file
View file

@ -0,0 +1,64 @@
/*
* P1020 RDB-PC Core0 Device Tree Source in CAMP mode.
*
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
* can be shared, all the other devices must be assigned to one core only.
* This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
* eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
*
* Please note to add "-b 0" for core0's dts compiling.
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "p1020rdb-pc_32b.dts"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
aliases {
ethernet1 = &enet1;
ethernet2 = &enet2;
serial0 = &serial0;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
PowerPC,P1020@1 {
status = "disabled";
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
status = "disabled";
};
soc@ffe00000 {
serial1: serial@4600 {
status = "disabled";
};
enet0: ethernet@b0000 {
status = "disabled";
};
mpic: pic@40000 {
protected-sources = <
42 29 30 34 /* serial1, enet0-queue-group0 */
17 18 24 45 /* enet0-queue-group1, crypto */
>;
pic-no-reset;
};
};
};

142
arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts Normal file
View file

@ -0,0 +1,142 @@
/*
* P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
*
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
* can be shared, all the other devices must be assigned to one core only.
* This dts allows core1 to have l2, eth0, crypto.
*
* Please note to add "-b 1" for core1's dts compiling.
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "p1020rdb-pc_32b.dts"
/ {
model = "fsl,P1020RDB-PC";
compatible = "fsl,P1020RDB-PC";
aliases {
ethernet0 = &enet0;
serial0 = &serial1;
};
cpus {
PowerPC,P1020@0 {
status = "disabled";
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
status = "disabled";
};
soc@ffe00000 {
ecm-law@0 {
status = "disabled";
};
ecm@1000 {
status = "disabled";
};
memory-controller@2000 {
status = "disabled";
};
i2c@3000 {
status = "disabled";
};
i2c@3100 {
status = "disabled";
};
serial0: serial@4500 {
status = "disabled";
};
spi@7000 {
status = "disabled";
};
gpio: gpio-controller@f000 {
status = "disabled";
};
dma@21300 {
status = "disabled";
};
mdio@24000 {
status = "disabled";
};
mdio@25000 {
status = "disabled";
};
enet1: ethernet@b1000 {
status = "disabled";
};
enet2: ethernet@b2000 {
status = "disabled";
};
usb@22000 {
status = "disabled";
};
sdhci@2e000 {
status = "disabled";
};
mpic: pic@40000 {
protected-sources = <
16 /* ecm, mem, L2, pci0, pci1 */
43 42 59 /* i2c, serial0, spi */
47 63 62 /* gpio, tdm */
20 21 22 23 /* dma */
03 02 /* mdio */
35 36 40 /* enet1-queue-group0 */
51 52 67 /* enet1-queue-group1 */
31 32 33 /* enet2-queue-group0 */
25 26 27 /* enet2-queue-group1 */
28 72 58 /* usb, sdhci, crypto */
0xb0 0xb1 0xb2 /* message */
0xb3 0xb4 0xb5
0xb6 0xb7
0xe0 0xe1 0xe2 /* msi */
0xe3 0xe4 0xe5
0xe6 0xe7 /* sdhci, crypto , pci */
>;
pic-no-reset;
};
msi@41600 {
status = "disabled";
};
global-utilities@e0000 { //global utilities block
status = "disabled";
};
};
pci0: pcie@ffe09000 {
status = "disabled";
};
pci1: pcie@ffe0a000 {
status = "disabled";
};
};

96
arch/powerpc/boot/dts/p1021rdb.dts Normal file
View file

@ -0,0 +1,96 @@
/*
* P1021 RDB Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021RDB";
compatible = "fsl,P1021RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
};
};
/include/ "p1021rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"

236
arch/powerpc/boot/dts/p1021rdb.dtsi Normal file
View file

@ -0,0 +1,236 @@
/*
* P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1021-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for User Writable Area */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI Flash U-Boot Image";
read-only;
};
partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "SPI Flash DTB Image";
};
partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI Flash Linux Kernel Image";
};
partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "SPI Flash Compressed RFSImage";
};
partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "SPI Flash JFFS2 RFS";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1 0 0>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
tbi-handle = <&tbi2>;
phy-connection-type = "rgmii-id";
};
};

96
arch/powerpc/boot/dts/p1021rdb_36b.dts Normal file
View file

@ -0,0 +1,96 @@
/*
* P1021 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021RDB";
compatible = "fsl,P1021RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000
0x2 0x0 0xf 0xffb00000 0x00020000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
reg = <0xf 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@fffe80000 {
ranges = <0x0 0xf 0xffe80000 0x40000>;
reg = <0xf 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
};
};
/include/ "p1021rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"

274
arch/powerpc/boot/dts/p1022ds.dts
View file

@ -1,274 +0,0 @@
/*
* P1022 DS 36Bit Physical Address Map Device Tree Source
*
* Copyright 2010 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
/*
* This node is used to access the pixis via "indirect" mode,
* which is done by writing the pixis register index to chip
* select 0 and the value to/from chip select 1. Indirect
* mode is the only way to access the pixis when DIU video
* is enabled. Note that this assumes that the first column
* of the 'ranges' property above is the chip select number.
*/
board-control@0,0 {
compatible = "fsl,p1022ds-indirect-pixis";
reg = <0x0 0x0 1 /* CS0 */
0x1 0x0 1>; /* CS1 */
};
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
read-only;
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
read-only;
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "jffs2-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00080000>;
label = "dtb-nor";
read-only;
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "jffs2-nand";
};
partition@12000000 {
reg = <0x12000000 0x10000000>;
label = "ramdisk-nand";
read-only;
};
partition@22000000 {
reg = <0x22000000 0x04000000>;
label = "kernel-nand";
};
partition@26000000 {
reg = <0x26000000 0x01000000>;
label = "dtb-nand";
read-only;
};
partition@27000000 {
reg = <0x27000000 0x19000000>;
label = "reserved-nand";
};
};
board-control@3,0 {
compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
/*
* IRQ8 is generated if the "EVENT" switch is pressed
* and PX_CTL[EVESEL] is set to 00.
*/
interrupts = <8 8 0 0>;
};
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
i2c@3100 {
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
/*
* clock-frequency will be set by U-Boot if
* the clock is enabled.
*/
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@600000 {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@700000 {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
ssi@15000 {
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,ssi-asynchronous;
};
usb@22000 {
phy_type = "ulpi";
};
usb@23000 {
status = "disabled";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <9 1 0 0>;
reg = <0x2>;
};
tbi-phy@2 {
device_type = "tbi-phy";
reg = <0x2>;
};
};
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@fffe0b000 {
reg = <0xf 0xffe0b000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1022si-post.dtsi"

234
arch/powerpc/boot/dts/p1022ds.dtsi Normal file
View file

@ -0,0 +1,234 @@
/*
* P1022 DS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
/*
* This node is used to access the pixis via "indirect" mode,
* which is done by writing the pixis register index to chip
* select 0 and the value to/from chip select 1. Indirect
* mode is the only way to access the pixis when DIU video
* is enabled. Note that this assumes that the first column
* of the 'ranges' property above is the chip select number.
*/
board-control@0,0 {
compatible = "fsl,p1022ds-indirect-pixis";
reg = <0x0 0x0 1 /* CS0 */
0x1 0x0 1>; /* CS1 */
interrupt-parent = <&mpic>;
interrupts = <8 0 0 0>;
};
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x03000000>;
label = "ramdisk-nor";
read-only;
};
partition@3000000 {
reg = <0x03000000 0x00e00000>;
label = "diagnostic-nor";
read-only;
};
partition@3e00000 {
reg = <0x03e00000 0x00200000>;
label = "dink-nor";
read-only;
};
partition@4000000 {
reg = <0x04000000 0x00400000>;
label = "kernel-nor";
read-only;
};
partition@4400000 {
reg = <0x04400000 0x03b00000>;
label = "jffs2-nor";
};
partition@7f00000 {
reg = <0x07f00000 0x00080000>;
label = "dtb-nor";
read-only;
};
partition@7f80000 {
reg = <0x07f80000 0x00080000>;
label = "u-boot-nor";
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
reg = <0x0 0x02000000>;
label = "u-boot-nand";
read-only;
};
partition@2000000 {
reg = <0x02000000 0x10000000>;
label = "jffs2-nand";
};
partition@12000000 {
reg = <0x12000000 0x10000000>;
label = "ramdisk-nand";
read-only;
};
partition@22000000 {
reg = <0x22000000 0x04000000>;
label = "kernel-nand";
};
partition@26000000 {
reg = <0x26000000 0x01000000>;
label = "dtb-nand";
read-only;
};
partition@27000000 {
reg = <0x27000000 0x19000000>;
label = "reserved-nand";
};
};
board-control@3,0 {
compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x30>;
interrupt-parent = <&mpic>;
/*
* IRQ8 is generated if the "EVENT" switch is pressed
* and PX_CTL[EVESEL] is set to 00.
*/
interrupts = <8 0 0 0>;
};
};
&board_soc {
i2c@3100 {
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
/*
* clock-frequency will be set by U-Boot if
* the clock is enabled.
*/
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "kernel-spi";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@600000 {
label = "dtb-spi";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@700000 {
label = "file system-spi";
reg = <0x00700000 0x00900000>;
};
};
};
ssi@15000 {
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,ssi-asynchronous;
};
usb@22000 {
phy_type = "ulpi";
};
usb@23000 {
status = "disabled";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <9 1 0 0>;
reg = <0x2>;
};
tbi-phy@2 {
device_type = "tbi-phy";
reg = <0x2>;
};
};
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};

103
arch/powerpc/boot/dts/p1022ds_32b.dts Normal file
View file

@ -0,0 +1,103 @@
/*
* P1022 DS 32-bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@ffe05000 {
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xff800000 0x00040000
0x3 0x0 0x0 0xffdf0000 0x00008000>;
reg = <0x0 0xffe05000 0 0x1000>;
};
board_soc: soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0x0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ffe0b000 {
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
reg = <0 0xffe0b000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1022si-post.dtsi"
/include/ "p1022ds.dtsi"

103
arch/powerpc/boot/dts/p1022ds_36b.dts Normal file
View file

@ -0,0 +1,103 @@
/*
* P1022 DS 36-bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1022si-pre.dtsi"
/ {
model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
memory {
device_type = "memory";
};
board_lbc: lbc: localbus@fffe05000 {
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
reg = <0xf 0xffe05000 0 0x1000>;
};
board_soc: soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
reg = <0xf 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
reg = <0xf 0xffe0a000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@fffe0b000 {
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
reg = <0xf 0xffe0b000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "fsl/p1022si-post.dtsi"
/include/ "p1022ds.dtsi"

286
arch/powerpc/boot/dts/p1025rdb.dtsi Normal file
View file

@ -0,0 +1,286 @@
/*
* P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1025-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "u-boot";
read-only;
};
partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "dtb";
};
partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "kernel";
};
partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "file system";
};
partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "file system jffs2";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
/* USB2 is shared with localbus, so it must be disabled
by default. We can't put 'status = "disabled";' here
since U-Boot doesn't clear the status property when
it enables USB2. OTOH, U-Boot does create a new node
when there isn't any. So, just comment it out.
usb@23000 {
phy_type = "ulpi";
};
*/
mdio@24000 {
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
par_io@e0100 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe0100 0x60>;
ranges = <0x0 0xe0100 0x60>;
device_type = "par_io";
num-ports = <3>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
};
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
};
};

135
arch/powerpc/boot/dts/p1025rdb_32b.dts Normal file
View file

@ -0,0 +1,135 @@
/*
* P1025 RDB Device Tree Source (32-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1025RDB";
compatible = "fsl,P1025RDB";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
status = "disabled"; /* no firmware loaded */
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
rx-clock-name = "clk12";
tx-clock-name = "clk9";
pio-handle = <&pio1>;
phy-handle = <&qe_phy0>;
phy-connection-type = "mii";
};
mdio@2120 {
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <4 1 0 0>;
reg = <0x6>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
rx-clock-name = "none";
tx-clock-name = "clk13";
pio-handle = <&pio2>;
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
};
};
/include/ "p1025rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"

88
arch/powerpc/boot/dts/p1025rdb_36b.dts Normal file
View file

@ -0,0 +1,88 @@
/*
* P1025 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1025RDB";
compatible = "fsl,P1025RDB";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1025rdb.dtsi"
/include/ "fsl/p1021si-post.dtsi"

241
arch/powerpc/boot/dts/p2020rdb-pc.dtsi Normal file
View file

@ -0,0 +1,241 @@
/*
* P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p2020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
cpld@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cpld";
reg = <0x3 0x0 0x20000>;
read-only;
};
};
&soc {
i2c@3000 {
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
reg = <0>;
spi-max-frequency = <40000000>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI U-Boot Image";
read-only;
};
partition@80000 {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "SPI DTB Image";
};
partition@100000 {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI Linux Kernel Image";
};
partition@500000 {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "SPI Compressed RFS Image";
};
partition@900000 {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "SPI JFFS2 RFS";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
};
};
mdio@25520 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
status = "disabled";
};
ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
fsl,tmr-fiper1 = <0x3B9AC9FB>;
fsl,tmr-fiper2 = <0x0001869B>;
fsl,max-adj = <249999999>;
};
enet0: ethernet@24000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@25000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
};
enet2: ethernet@26000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};

96
arch/powerpc/boot/dts/p2020rdb-pc_32b.dts Normal file
View file

@ -0,0 +1,96 @@
/*
* P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000
0x3 0x0 0x0 0xffa00000 0x00020000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@ffe0a000 {
reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p2020rdb-pc.dtsi"
/include/ "fsl/p2020si-post.dtsi"

96
arch/powerpc/boot/dts/p2020rdb-pc_36b.dts Normal file
View file

@ -0,0 +1,96 @@
/*
* P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB-PC";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000
0x2 0x0 0xf 0xffb00000 0x00020000
0x3 0x0 0xf 0xffa00000 0x00020000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci2: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p2020rdb-pc.dtsi"
/include/ "fsl/p2020si-post.dtsi"

4
arch/powerpc/boot/dts/p2020rdb.dts
View file

@ -34,7 +34,7 @@
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x1 0x0 0x0 0xff800000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
@ -157,7 +157,7 @@
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
spi-max-frequency = <40000000>;
partition@0 {
/* 512KB for u-boot Bootloader Image */

22
arch/powerpc/boot/wrapper
View file

@ -144,6 +144,7 @@ tmp=$tmpdir/zImage.$$.o
ksection=.kernel:vmlinux.strip
isection=.kernel:initrd
link_address='0x400000'
make_space=y
case "$platform" in
pseries)
@ -210,6 +211,7 @@ ps3)
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
link_address=''
make_space=n
pie=
;;
ep88xc|ep405|ep8248e)
@ -278,17 +280,19 @@ else
rm -f $vmz.$$
fi
# Round the size to next higher MB limit
round_size=$(((strip_size + 0xfffff) & 0xfff00000))
if [ "$make_space" = "y" ]; then
# Round the size to next higher MB limit
round_size=$(((strip_size + 0xfffff) & 0xfff00000))
round_size=0x$(printf "%x" $round_size)
link_addr=$(printf "%d" $link_address)
round_size=0x$(printf "%x" $round_size)
link_addr=$(printf "%d" $link_address)
if [ $link_addr -lt $strip_size ]; then
echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
"overlaps the address of the wrapper($link_address)"
echo "INFO: Fixing the link_address of wrapper to ($round_size)"
link_address=$round_size
if [ $link_addr -lt $strip_size ]; then
echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
"overlaps the address of the wrapper($link_address)"
echo "INFO: Fixing the link_address of wrapper to ($round_size)"
link_address=$round_size
fi
fi
vmz="$vmz$gzip"

257
arch/powerpc/configs/85xx/ge_imp3a_defconfig Normal file
View file

@ -0,0 +1,257 @@
CONFIG_PPC_85xx=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_GE_IMP3A=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_HIGHMEM=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_YENTA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET6_AH=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_MISC_DEVICES=y
CONFIG_DS1682=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
# CONFIG_ATA_SFF is not set
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL_TRAP=y
CONFIG_TUN=m
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_FS_ENET=y
CONFIG_UCC_GETH=y
CONFIG_GIANFAR=y
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_QE=m
CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y
CONFIG_GEF_WDT=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_DRV_RX8581=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
# CONFIG_NET_DMA is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_TALITOS=y

1
arch/powerpc/configs/86xx/gef_ppc9a_defconfig
View file

@ -131,6 +131,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y

1
arch/powerpc/configs/86xx/gef_sbc310_defconfig
View file

@ -132,6 +132,7 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y

2
arch/powerpc/configs/86xx/gef_sbc610_defconfig
View file

@ -183,6 +183,8 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GE_FPGA=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_WATCHDOG=y

236
arch/powerpc/configs/iseries_defconfig
View file

@ -1,236 +0,0 @@
CONFIG_PPC64=y
CONFIG_SMP=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_PPC_PSERIES is not set
CONFIG_LPARCFG=y
CONFIG_PPC_ISERIES=y
CONFIG_VIODASD=y
CONFIG_VIOCD=m
CONFIG_VIOTAPE=m
# CONFIG_PPC_PMAC is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_MIGRATION is not set
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_IBMVSCSI=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_E100=y
CONFIG_ACENIC=m
CONFIG_E1000=m
CONFIG_ISERIES_VETH=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL_TRAP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ICOM=m
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_GFS2_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DLM=m
CONFIG_CRC_T10DIF=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

27
arch/powerpc/configs/mpc5200_defconfig
View file

@ -1,8 +1,8 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
@ -13,15 +13,12 @@ CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_GPIO=y
CONFIG_PPC_MPC5200_LPBFIFO=m
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_SIMPLE_GPIO=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SPARSE_IRQ=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -36,23 +33,20 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_UBI=m
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI_TGT=y
CONFIG_BLK_DEV_SD=y
@ -61,11 +55,10 @@ CONFIG_ATA=y
CONFIG_PATA_MPC52xx=y
CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_LXT_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC_MPC52xx=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_AMD_PHY=y
CONFIG_LXT_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -80,11 +73,17 @@ CONFIG_SPI_GPIO=m
CONFIG_SPI_MPC52xx=m
CONFIG_SPI_MPC52xx_PSC=m
CONFIG_SPI_SPIDEV=m
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM87=m
CONFIG_WATCHDOG=y
CONFIG_MFD_SM501=m
CONFIG_DRM=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_RADEON=y
CONFIG_FB_SM501=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
@ -124,10 +123,11 @@ CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
@ -145,5 +145,4 @@ CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/mpc85xx_defconfig
View file

@ -1,4 +1,5 @@
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y

1
arch/powerpc/configs/mpc85xx_smp_defconfig
View file

@ -1,4 +1,5 @@
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_EXPERIMENTAL=y

21
arch/powerpc/include/asm/abs_addr.h
View file

@ -17,7 +17,6 @@
#include <asm/types.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/firmware.h>
struct mschunks_map {
unsigned long num_chunks;
@ -46,30 +45,12 @@ static inline unsigned long addr_to_chunk(unsigned long addr)
static inline unsigned long phys_to_abs(unsigned long pa)
{
unsigned long chunk;
/* This is a no-op on non-iSeries */
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return pa;
chunk = addr_to_chunk(pa);
if (chunk < mschunks_map.num_chunks)
chunk = mschunks_map.mapping[chunk];
return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
return pa;
}
/* Convenience macros */
#define virt_to_abs(va) phys_to_abs(__pa(va))
#define abs_to_virt(aa) __va(aa)
/*
* Converts Virtual Address to Real Address for
* Legacy iSeries Hypervisor calls
*/
#define iseries_hv_addr(virtaddr) \
(0x8000000000000000UL | virt_to_abs(virtaddr))
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_ABS_ADDR_H */

59
arch/powerpc/include/asm/atomic.h
View file

@ -212,6 +212,36 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
return t;
}
/**
* atomic_inc_not_zero - increment unless the number is zero
* @v: pointer of type atomic_t
*
* Atomically increments @v by 1, so long as @v is non-zero.
* Returns non-zero if @v was non-zero, and zero otherwise.
*/
static __inline__ int atomic_inc_not_zero(atomic_t *v)
{
int t1, t2;
__asm__ __volatile__ (
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %0,0,%2 # atomic_inc_not_zero\n\
cmpwi 0,%0,0\n\
beq- 2f\n\
addic %1,%0,1\n"
PPC405_ERR77(0,%2)
" stwcx. %1,0,%2\n\
bne- 1b\n"
PPC_ATOMIC_EXIT_BARRIER
"\n\
2:"
: "=&r" (t1), "=&r" (t2)
: "r" (&v->counter)
: "cc", "xer", "memory");
return t1;
}
#define atomic_inc_not_zero(v) atomic_inc_not_zero((v))
#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0)
#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0)
@ -467,7 +497,34 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
return t != u;
}
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
/**
* atomic_inc64_not_zero - increment unless the number is zero
* @v: pointer of type atomic64_t
*
* Atomically increments @v by 1, so long as @v is non-zero.
* Returns non-zero if @v was non-zero, and zero otherwise.
*/
static __inline__ long atomic64_inc_not_zero(atomic64_t *v)
{
long t1, t2;
__asm__ __volatile__ (
PPC_ATOMIC_ENTRY_BARRIER
"1: ldarx %0,0,%2 # atomic64_inc_not_zero\n\
cmpdi 0,%0,0\n\
beq- 2f\n\
addic %1,%0,1\n\
stdcx. %1,0,%2\n\
bne- 1b\n"
PPC_ATOMIC_EXIT_BARRIER
"\n\
2:"
: "=&r" (t1), "=&r" (t2)
: "r" (&v->counter)
: "cc", "xer", "memory");
return t1;
}
#endif /* __powerpc64__ */

12
arch/powerpc/include/asm/cputable.h
View file

@ -390,6 +390,10 @@ extern const char *powerpc_base_platform;
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_DEBUG_LVL_EXC)
#define CPU_FTRS_E6500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_DEBUG_LVL_EXC)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
@ -442,7 +446,7 @@ extern const char *powerpc_base_platform;
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500 | CPU_FTRS_A2)
#define CPU_FTRS_POSSIBLE (CPU_FTRS_E6500 | CPU_FTRS_E5500 | CPU_FTRS_A2)
#else
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
@ -483,7 +487,7 @@ enum {
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
CPU_FTRS_E5500 |
CPU_FTRS_E5500 | CPU_FTRS_E6500 |
#endif
0,
};
@ -491,7 +495,7 @@ enum {
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500 & CPU_FTRS_A2)
#define CPU_FTRS_ALWAYS (CPU_FTRS_E6500 & CPU_FTRS_E5500 & CPU_FTRS_A2)
#else
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
@ -528,7 +532,7 @@ enum {
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
CPU_FTRS_E5500 &
CPU_FTRS_E5500 & CPU_FTRS_E6500 &
#endif
CPU_FTRS_POSSIBLE,
};

3
arch/powerpc/include/asm/device.h
View file

@ -31,6 +31,9 @@ struct dev_archdata {
#ifdef CONFIG_SWIOTLB
dma_addr_t max_direct_dma_addr;
#endif
#ifdef CONFIG_EEH
struct eeh_dev *edev;
#endif
};
struct pdev_archdata {

4
arch/powerpc/include/asm/dma.h
View file

@ -34,8 +34,6 @@
/* Doesn't really apply... */
#define MAX_DMA_ADDRESS (~0UL)
#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
#define dma_outb outb_p
#else
@ -354,7 +352,5 @@ extern int isa_dma_bridge_buggy;
#define isa_dma_bridge_buggy (0)
#endif
#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DMA_H */

134
arch/powerpc/include/asm/eeh.h
View file

@ -1,6 +1,6 @@
/*
* eeh.h
* Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation.
* Copyright 2001-2012 IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -31,44 +31,105 @@ struct device_node;
#ifdef CONFIG_EEH
/*
* The struct is used to trace EEH state for the associated
* PCI device node or PCI device. In future, it might
* represent PE as well so that the EEH device to form
* another tree except the currently existing tree of PCI
* buses and PCI devices
*/
#define EEH_MODE_SUPPORTED (1<<0) /* EEH supported on the device */
#define EEH_MODE_NOCHECK (1<<1) /* EEH check should be skipped */
#define EEH_MODE_ISOLATED (1<<2) /* The device has been isolated */
#define EEH_MODE_RECOVERING (1<<3) /* Recovering the device */
#define EEH_MODE_IRQ_DISABLED (1<<4) /* Interrupt disabled */
struct eeh_dev {
int mode; /* EEH mode */
int class_code; /* Class code of the device */
int config_addr; /* Config address */
int pe_config_addr; /* PE config address */
int check_count; /* Times of ignored error */
int freeze_count; /* Times of froze up */
int false_positives; /* Times of reported #ff's */
u32 config_space[16]; /* Saved PCI config space */
struct pci_controller *phb; /* Associated PHB */
struct device_node *dn; /* Associated device node */
struct pci_dev *pdev; /* Associated PCI device */
};
static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
{
return edev->dn;
}
static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev)
{
return edev->pdev;
}
/*
* The struct is used to trace the registered EEH operation
* callback functions. Actually, those operation callback
* functions are heavily platform dependent. That means the
* platform should register its own EEH operation callback
* functions before any EEH further operations.
*/
#define EEH_OPT_DISABLE 0 /* EEH disable */
#define EEH_OPT_ENABLE 1 /* EEH enable */
#define EEH_OPT_THAW_MMIO 2 /* MMIO enable */
#define EEH_OPT_THAW_DMA 3 /* DMA enable */
#define EEH_STATE_UNAVAILABLE (1 << 0) /* State unavailable */
#define EEH_STATE_NOT_SUPPORT (1 << 1) /* EEH not supported */
#define EEH_STATE_RESET_ACTIVE (1 << 2) /* Active reset */
#define EEH_STATE_MMIO_ACTIVE (1 << 3) /* Active MMIO */
#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */
#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */
#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */
#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */
#define EEH_RESET_HOT 1 /* Hot reset */
#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
#define EEH_LOG_TEMP 1 /* EEH temporary error log */
#define EEH_LOG_PERM 2 /* EEH permanent error log */
struct eeh_ops {
char *name;
int (*init)(void);
int (*set_option)(struct device_node *dn, int option);
int (*get_pe_addr)(struct device_node *dn);
int (*get_state)(struct device_node *dn, int *state);
int (*reset)(struct device_node *dn, int option);
int (*wait_state)(struct device_node *dn, int max_wait);
int (*get_log)(struct device_node *dn, int severity, char *drv_log, unsigned long len);
int (*configure_bridge)(struct device_node *dn);
int (*read_config)(struct device_node *dn, int where, int size, u32 *val);
int (*write_config)(struct device_node *dn, int where, int size, u32 val);
};
extern struct eeh_ops *eeh_ops;
extern int eeh_subsystem_enabled;
/* Values for eeh_mode bits in device_node */
#define EEH_MODE_SUPPORTED (1<<0)
#define EEH_MODE_NOCHECK (1<<1)
#define EEH_MODE_ISOLATED (1<<2)
#define EEH_MODE_RECOVERING (1<<3)
#define EEH_MODE_IRQ_DISABLED (1<<4)
/* Max number of EEH freezes allowed before we consider the device
* to be permanently disabled. */
/*
* Max number of EEH freezes allowed before we consider the device
* to be permanently disabled.
*/
#define EEH_MAX_ALLOWED_FREEZES 5
void * __devinit eeh_dev_init(struct device_node *dn, void *data);
void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb);
void __init eeh_dev_phb_init(void);
void __init eeh_init(void);
#ifdef CONFIG_PPC_PSERIES
int __init eeh_pseries_init(void);
#endif
int __init eeh_ops_register(struct eeh_ops *ops);
int __exit eeh_ops_unregister(const char *name);
unsigned long eeh_check_failure(const volatile void __iomem *token,
unsigned long val);
int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
void __init pci_addr_cache_build(void);
/**
* eeh_add_device_early
* eeh_add_device_late
*
* Perform eeh initialization for devices added after boot.
* Call eeh_add_device_early before doing any i/o to the
* device (including config space i/o). Call eeh_add_device_late
* to finish the eeh setup for this device.
*/
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device_recursive - undo EEH for device & children.
* @dev: pci device to be removed
*
* As above, this removes the device; it also removes child
* pci devices as well.
*/
void eeh_remove_bus_device(struct pci_dev *);
/**
@ -87,8 +148,25 @@ void eeh_remove_bus_device(struct pci_dev *);
#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8))
#else /* !CONFIG_EEH */
static inline void *eeh_dev_init(struct device_node *dn, void *data)
{
return NULL;
}
static inline void eeh_dev_phb_init_dynamic(struct pci_controller *phb) { }
static inline void eeh_dev_phb_init(void) { }
static inline void eeh_init(void) { }
#ifdef CONFIG_PPC_PSERIES
static inline int eeh_pseries_init(void)
{
return 0;
}
#endif /* CONFIG_PPC_PSERIES */
static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
{
return val;

33
arch/powerpc/include/asm/eeh_event.h
View file

@ -1,6 +1,4 @@
/*
* eeh_event.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@ -22,32 +20,19 @@
#define ASM_POWERPC_EEH_EVENT_H
#ifdef __KERNEL__
/** EEH event -- structure holding pci controller data that describes
* a change in the isolation status of a PCI slot. A pointer
* to this struct is passed as the data pointer in a notify callback.
/*
* structure holding pci controller data that describes a
* change in the isolation status of a PCI slot. A pointer
* to this struct is passed as the data pointer in a notify
* callback.
*/
struct eeh_event {
struct list_head list;
struct device_node *dn; /* struct device node */
struct pci_dev *dev; /* affected device */
struct list_head list; /* to form event queue */
struct eeh_dev *edev; /* EEH device */
};
/**
* eeh_send_failure_event - generate a PCI error event
* @dev pci device
*
* This routine builds a PCI error event which will be delivered
* to all listeners on the eeh_notifier_chain.
*
* This routine can be called within an interrupt context;
* the actual event will be delivered in a normal context
* (from a workqueue).
*/
int eeh_send_failure_event (struct device_node *dn,
struct pci_dev *dev);
/* Main recovery function */
struct pci_dn * handle_eeh_events (struct eeh_event *);
int eeh_send_failure_event(struct eeh_dev *edev);
struct eeh_dev *handle_eeh_events(struct eeh_event *);
#endif /* __KERNEL__ */
#endif /* ASM_POWERPC_EEH_EVENT_H */

113
arch/powerpc/include/asm/exception-64s.h
View file

@ -232,23 +232,30 @@ label##_hv: \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
EXC_HV, KVMTEST, vec)
#define __SOFTEN_TEST(h) \
/* This associate vector numbers with bits in paca->irq_happened */
#define SOFTEN_VALUE_0x500 PACA_IRQ_EE
#define SOFTEN_VALUE_0x502 PACA_IRQ_EE
#define SOFTEN_VALUE_0x900 PACA_IRQ_DEC
#define SOFTEN_VALUE_0x982 PACA_IRQ_DEC
#define __SOFTEN_TEST(h, vec) \
lbz r10,PACASOFTIRQEN(r13); \
cmpwi r10,0; \
li r10,SOFTEN_VALUE_##vec; \
beq masked_##h##interrupt
#define _SOFTEN_TEST(h) __SOFTEN_TEST(h)
#define _SOFTEN_TEST(h, vec) __SOFTEN_TEST(h, vec)
#define SOFTEN_TEST_PR(vec) \
KVMTEST_PR(vec); \
_SOFTEN_TEST(EXC_STD)
_SOFTEN_TEST(EXC_STD, vec)
#define SOFTEN_TEST_HV(vec) \
KVMTEST(vec); \
_SOFTEN_TEST(EXC_HV)
_SOFTEN_TEST(EXC_HV, vec)
#define SOFTEN_TEST_HV_201(vec) \
KVMTEST(vec); \
_SOFTEN_TEST(EXC_STD)
_SOFTEN_TEST(EXC_STD, vec)
#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \
HMT_MEDIUM; \
@ -272,73 +279,55 @@ label##_hv: \
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
EXC_HV, SOFTEN_TEST_HV)
#ifdef CONFIG_PPC_ISERIES
#define DISABLE_INTS \
li r11,0; \
stb r11,PACASOFTIRQEN(r13); \
BEGIN_FW_FTR_SECTION; \
stb r11,PACAHARDIRQEN(r13); \
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
TRACE_DISABLE_INTS; \
BEGIN_FW_FTR_SECTION; \
mfmsr r10; \
ori r10,r10,MSR_EE; \
mtmsrd r10,1; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#else
#define DISABLE_INTS \
li r11,0; \
stb r11,PACASOFTIRQEN(r13); \
stb r11,PACAHARDIRQEN(r13); \
TRACE_DISABLE_INTS
#endif /* CONFIG_PPC_ISERIES */
/*
* Our exception common code can be passed various "additions"
* to specify the behaviour of interrupts, whether to kick the
* runlatch, etc...
*/
/* Exception addition: Hard disable interrupts */
#define DISABLE_INTS SOFT_DISABLE_INTS(r10,r11)
/* Exception addition: Keep interrupt state */
#define ENABLE_INTS \
ld r11,PACAKMSR(r13); \
ld r12,_MSR(r1); \
mfmsr r11; \
rlwimi r11,r12,0,MSR_EE; \
mtmsrd r11,1
#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
.align 7; \
.globl label##_common; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
DISABLE_INTS; \
bl .save_nvgprs; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b .ret_from_except
#define ADD_NVGPRS \
bl .save_nvgprs
#define RUNLATCH_ON \
BEGIN_FTR_SECTION \
clrrdi r3,r1,THREAD_SHIFT; \
ld r4,TI_LOCAL_FLAGS(r3); \
andi. r0,r4,_TLF_RUNLATCH; \
beql ppc64_runlatch_on_trampoline; \
END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
#define EXCEPTION_COMMON(trap, label, hdlr, ret, additions) \
.align 7; \
.globl label##_common; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
additions; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b ret
#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
EXCEPTION_COMMON(trap, label, hdlr, ret_from_except, \
ADD_NVGPRS;DISABLE_INTS)
/*
* Like STD_EXCEPTION_COMMON, but for exceptions that can occur
* in the idle task and therefore need the special idle handling.
* in the idle task and therefore need the special idle handling
* (finish nap and runlatch)
*/
#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \
.align 7; \
.globl label##_common; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
FINISH_NAP; \
DISABLE_INTS; \
bl .save_nvgprs; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b .ret_from_except
#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
.align 7; \
.globl label##_common; \
label##_common: \
EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
FINISH_NAP; \
DISABLE_INTS; \
BEGIN_FTR_SECTION \
bl .ppc64_runlatch_on; \
END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
b .ret_from_except_lite
#define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \
EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \
FINISH_NAP;RUNLATCH_ON;DISABLE_INTS)
/*
* When the idle code in power4_idle puts the CPU into NAP mode,

218
arch/powerpc/include/asm/fadump.h Normal file
View file

@ -0,0 +1,218 @@
/*
* Firmware Assisted dump header file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright 2011 IBM Corporation
* Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
*/
#ifndef __PPC64_FA_DUMP_H__
#define __PPC64_FA_DUMP_H__
#ifdef CONFIG_FA_DUMP
/*
* The RMA region will be saved for later dumping when kernel crashes.
* RMA is Real Mode Area, the first block of logical memory address owned
* by logical partition, containing the storage that may be accessed with
* translate off.
*/
#define RMA_START 0x0
#define RMA_END (ppc64_rma_size)
/*
* On some Power systems where RMO is 128MB, it still requires minimum of
* 256MB for kernel to boot successfully. When kdump infrastructure is
* configured to save vmcore over network, we run into OOM issue while
* loading modules related to network setup. Hence we need aditional 64M
* of memory to avoid OOM issue.
*/
#define MIN_BOOT_MEM (((RMA_END < (0x1UL << 28)) ? (0x1UL << 28) : RMA_END) \
+ (0x1UL << 26))
#define memblock_num_regions(memblock_type) (memblock.memblock_type.cnt)
#ifndef ELF_CORE_EFLAGS
#define ELF_CORE_EFLAGS 0
#endif
/* Firmware provided dump sections */
#define FADUMP_CPU_STATE_DATA 0x0001
#define FADUMP_HPTE_REGION 0x0002
#define FADUMP_REAL_MODE_REGION 0x0011
/* Dump request flag */
#define FADUMP_REQUEST_FLAG 0x00000001
/* FAD commands */
#define FADUMP_REGISTER 1
#define FADUMP_UNREGISTER 2
#define FADUMP_INVALIDATE 3
/* Dump status flag */
#define FADUMP_ERROR_FLAG 0x2000
#define FADUMP_CPU_ID_MASK ((1UL << 32) - 1)
#define CPU_UNKNOWN (~((u32)0))
/* Utility macros */
#define SKIP_TO_NEXT_CPU(reg_entry) \
({ \
while (reg_entry->reg_id != REG_ID("CPUEND")) \
reg_entry++; \
reg_entry++; \
})
/* Kernel Dump section info */
struct fadump_section {
u32 request_flag;
u16 source_data_type;
u16 error_flags;
u64 source_address;
u64 source_len;
u64 bytes_dumped;
u64 destination_address;
};
/* ibm,configure-kernel-dump header. */
struct fadump_section_header {
u32 dump_format_version;
u16 dump_num_sections;
u16 dump_status_flag;
u32 offset_first_dump_section;
/* Fields for disk dump option. */
u32 dd_block_size;
u64 dd_block_offset;
u64 dd_num_blocks;
u32 dd_offset_disk_path;
/* Maximum time allowed to prevent an automatic dump-reboot. */
u32 max_time_auto;
};
/*
* Firmware Assisted dump memory structure. This structure is required for
* registering future kernel dump with power firmware through rtas call.
*
* No disk dump option. Hence disk dump path string section is not included.
*/
struct fadump_mem_struct {
struct fadump_section_header header;
/* Kernel dump sections */
struct fadump_section cpu_state_data;
struct fadump_section hpte_region;
struct fadump_section rmr_region;
};
/* Firmware-assisted dump configuration details. */
struct fw_dump {
unsigned long cpu_state_data_size;
unsigned long hpte_region_size;
unsigned long boot_memory_size;
unsigned long reserve_dump_area_start;
unsigned long reserve_dump_area_size;
/* cmd line option during boot */
unsigned long reserve_bootvar;
unsigned long fadumphdr_addr;
unsigned long cpu_notes_buf;
unsigned long cpu_notes_buf_size;
int ibm_configure_kernel_dump;
unsigned long fadump_enabled:1;
unsigned long fadump_supported:1;
unsigned long dump_active:1;
unsigned long dump_registered:1;
};
/*
* Copy the ascii values for first 8 characters from a string into u64
* variable at their respective indexes.
* e.g.
* The string "FADMPINF" will be converted into 0x4641444d50494e46
*/
static inline u64 str_to_u64(const char *str)
{
u64 val = 0;
int i;
for (i = 0; i < sizeof(val); i++)
val = (*str) ? (val << 8) | *str++ : val << 8;
return val;
}
#define STR_TO_HEX(x) str_to_u64(x)
#define REG_ID(x) str_to_u64(x)
#define FADUMP_CRASH_INFO_MAGIC STR_TO_HEX("FADMPINF")
#define REGSAVE_AREA_MAGIC STR_TO_HEX("REGSAVE")
/* The firmware-assisted dump format.
*
* The register save area is an area in the partition's memory used to preserve
* the register contents (CPU state data) for the active CPUs during a firmware
* assisted dump. The dump format contains register save area header followed
* by register entries. Each list of registers for a CPU starts with
* "CPUSTRT" and ends with "CPUEND".
*/
/* Register save area header. */
struct fadump_reg_save_area_header {
u64 magic_number;
u32 version;
u32 num_cpu_offset;
};
/* Register entry. */
struct fadump_reg_entry {
u64 reg_id;
u64 reg_value;
};
/* fadump crash info structure */
struct fadump_crash_info_header {
u64 magic_number;
u64 elfcorehdr_addr;
u32 crashing_cpu;
struct pt_regs regs;
struct cpumask cpu_online_mask;
};
/* Crash memory ranges */
#define INIT_CRASHMEM_RANGES (INIT_MEMBLOCK_REGIONS + 2)
struct fad_crash_memory_ranges {
unsigned long long base;
unsigned long long size;
};
extern int early_init_dt_scan_fw_dump(unsigned long node,
const char *uname, int depth, void *data);
extern int fadump_reserve_mem(void);
extern int setup_fadump(void);
extern int is_fadump_active(void);
extern void crash_fadump(struct pt_regs *, const char *);
extern void fadump_cleanup(void);
extern void vmcore_cleanup(void);
#else /* CONFIG_FA_DUMP */
static inline int is_fadump_active(void) { return 0; }
static inline void crash_fadump(struct pt_regs *regs, const char *str) { }
#endif
#endif

9
arch/powerpc/include/asm/firmware.h
View file

@ -41,7 +41,6 @@
#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000)
#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000)
@ -65,8 +64,6 @@ enum {
FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
FW_FEATURE_POWERNV_ALWAYS = 0,
FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
@ -79,9 +76,6 @@ enum {
#ifdef CONFIG_PPC_PSERIES
FW_FEATURE_PSERIES_POSSIBLE |
#endif
#ifdef CONFIG_PPC_ISERIES
FW_FEATURE_ISERIES_POSSIBLE |
#endif
#ifdef CONFIG_PPC_POWERNV
FW_FEATURE_POWERNV_POSSIBLE |
#endif
@ -99,9 +93,6 @@ enum {
#ifdef CONFIG_PPC_PSERIES
FW_FEATURE_PSERIES_ALWAYS &
#endif
#ifdef CONFIG_PPC_ISERIES
FW_FEATURE_ISERIES_ALWAYS &
#endif
#ifdef CONFIG_PPC_POWERNV
FW_FEATURE_POWERNV_ALWAYS &
#endif

6
arch/powerpc/include/asm/fsl_guts.h
View file

@ -4,7 +4,7 @@
* Authors: Jeff Brown
* Timur Tabi <timur@freescale.com>
*
* Copyright 2004,2007 Freescale Semiconductor, Inc
* Copyright 2004,2007,2012 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -114,6 +114,10 @@ struct ccsr_guts_86xx {
__be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
} __attribute__ ((packed));
/* Alternate function signal multiplex control */
#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
#ifdef CONFIG_PPC_86xx
#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */

63
arch/powerpc/include/asm/hw_irq.h
View file

@ -11,6 +11,27 @@
#include <asm/ptrace.h>
#include <asm/processor.h>
#ifdef CONFIG_PPC64
/*
* PACA flags in paca->irq_happened.
*
* This bits are set when interrupts occur while soft-disabled
* and allow a proper replay. Additionally, PACA_IRQ_HARD_DIS
* is set whenever we manually hard disable.
*/
#define PACA_IRQ_HARD_DIS 0x01
#define PACA_IRQ_DBELL 0x02
#define PACA_IRQ_EE 0x04
#define PACA_IRQ_DEC 0x08 /* Or FIT */
#define PACA_IRQ_EE_EDGE 0x10 /* BookE only */
#endif /* CONFIG_PPC64 */
#ifndef __ASSEMBLY__
extern void __replay_interrupt(unsigned int vector);
extern void timer_interrupt(struct pt_regs *);
#ifdef CONFIG_PPC64
@ -42,7 +63,6 @@ static inline unsigned long arch_local_irq_disable(void)
}
extern void arch_local_irq_restore(unsigned long);
extern void iseries_handle_interrupts(void);
static inline void arch_local_irq_enable(void)
{
@ -68,16 +88,33 @@ static inline bool arch_irqs_disabled(void)
#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
#else
#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
#endif
#define hard_irq_disable() \
do { \
__hard_irq_disable(); \
get_paca()->soft_enabled = 0; \
get_paca()->hard_enabled = 0; \
} while(0)
static inline void hard_irq_disable(void)
{
__hard_irq_disable();
get_paca()->soft_enabled = 0;
get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
}
/*
* This is called by asynchronous interrupts to conditionally
* re-enable hard interrupts when soft-disabled after having
* cleared the source of the interrupt
*/
static inline void may_hard_irq_enable(void)
{
get_paca()->irq_happened &= ~PACA_IRQ_HARD_DIS;
if (!(get_paca()->irq_happened & PACA_IRQ_EE))
__hard_irq_enable();
}
static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
{
return !regs->softe;
}
#else /* CONFIG_PPC64 */
@ -139,6 +176,13 @@ static inline bool arch_irqs_disabled(void)
#define hard_irq_disable() arch_local_irq_disable()
static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
{
return !(regs->msr & MSR_EE);
}
static inline void may_hard_irq_enable(void) { }
#endif /* CONFIG_PPC64 */
#define ARCH_IRQ_INIT_FLAGS IRQ_NOREQUEST
@ -149,5 +193,6 @@ static inline bool arch_irqs_disabled(void)
*/
struct irq_chip;
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HW_IRQ_H */

37
arch/powerpc/include/asm/irqflags.h
View file

@ -39,24 +39,31 @@
#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \
cmpdi en,0; \
bne 95f; \
stb en,PACASOFTIRQEN(r13); \
TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off) \
b skip; \
95: TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on) \
li en,1;
#define TRACE_AND_RESTORE_IRQ(en) \
TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \
stb en,PACASOFTIRQEN(r13); \
96:
/*
* This is used by assembly code to soft-disable interrupts
*/
#define SOFT_DISABLE_INTS(__rA, __rB) \
lbz __rA,PACASOFTIRQEN(r13); \
lbz __rB,PACAIRQHAPPENED(r13); \
cmpwi cr0,__rA,0; \
li __rA,0; \
ori __rB,__rB,PACA_IRQ_HARD_DIS; \
stb __rB,PACAIRQHAPPENED(r13); \
beq 44f; \
stb __rA,PACASOFTIRQEN(r13); \
TRACE_DISABLE_INTS; \
44:
#else
#define TRACE_ENABLE_INTS
#define TRACE_DISABLE_INTS
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
#define TRACE_AND_RESTORE_IRQ(en) \
stb en,PACASOFTIRQEN(r13)
#define SOFT_DISABLE_INTS(__rA, __rB) \
lbz __rA,PACAIRQHAPPENED(r13); \
li __rB,0; \
ori __rA,__rA,PACA_IRQ_HARD_DIS; \
stb __rB,PACASOFTIRQEN(r13); \
stb __rA,PACAIRQHAPPENED(r13)
#endif
#endif

31
arch/powerpc/include/asm/iseries/alpaca.h
View file

@ -1,31 +0,0 @@
/*
* Copyright © 2008 Stephen Rothwell IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
#define _ASM_POWERPC_ISERIES_ALPACA_H
/*
* This is the part of the paca that the iSeries hypervisor
* needs to be statically initialised. Immediately after boot
* we switch to the normal Linux paca.
*/
struct alpaca {
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
};
#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */

111
arch/powerpc/include/asm/iseries/hv_call.h
View file

@ -1,111 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This file contains the "hypervisor call" interface which is used to
* drive the hypervisor from the OS.
*/
#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H
#define _ASM_POWERPC_ISERIES_HV_CALL_H
#include <asm/iseries/hv_call_sc.h>
#include <asm/iseries/hv_types.h>
#include <asm/paca.h>
/* Type of yield for HvCallBaseYieldProcessor */
#define HvCall_YieldTimed 0 /* Yield until specified time (tb) */
#define HvCall_YieldToActive 1 /* Yield until all active procs have run */
#define HvCall_YieldToProc 2 /* Yield until the specified processor has run */
/* interrupt masks for setEnabledInterrupts */
#define HvCall_MaskIPI 0x00000001
#define HvCall_MaskLpEvent 0x00000002
#define HvCall_MaskLpProd 0x00000004
#define HvCall_MaskTimeout 0x00000008
/* Log buffer formats */
#define HvCall_LogBuffer_ASCII 0
#define HvCall_LogBuffer_EBCDIC 1
#define HvCallBaseAckDeferredInts HvCallBase + 0
#define HvCallBaseCpmPowerOff HvCallBase + 1
#define HvCallBaseGetHwPatch HvCallBase + 2
#define HvCallBaseReIplSpAttn HvCallBase + 3
#define HvCallBaseSetASR HvCallBase + 4
#define HvCallBaseSetASRAndRfi HvCallBase + 5
#define HvCallBaseSetIMR HvCallBase + 6
#define HvCallBaseSendIPI HvCallBase + 7
#define HvCallBaseTerminateMachine HvCallBase + 8
#define HvCallBaseTerminateMachineSrc HvCallBase + 9
#define HvCallBaseProcessPlicInterrupts HvCallBase + 10
#define HvCallBaseIsPrimaryCpmOrMsdIpl HvCallBase + 11
#define HvCallBaseSetVirtualSIT HvCallBase + 12
#define HvCallBaseVaryOffThisProcessor HvCallBase + 13
#define HvCallBaseVaryOffMemoryChunk HvCallBase + 14
#define HvCallBaseVaryOffInteractivePercentage HvCallBase + 15
#define HvCallBaseSendLpProd HvCallBase + 16
#define HvCallBaseSetEnabledInterrupts HvCallBase + 17
#define HvCallBaseYieldProcessor HvCallBase + 18
#define HvCallBaseVaryOffSharedProcUnits HvCallBase + 19
#define HvCallBaseSetVirtualDecr HvCallBase + 20
#define HvCallBaseClearLogBuffer HvCallBase + 21
#define HvCallBaseGetLogBufferCodePage HvCallBase + 22
#define HvCallBaseGetLogBufferFormat HvCallBase + 23
#define HvCallBaseGetLogBufferLength HvCallBase + 24
#define HvCallBaseReadLogBuffer HvCallBase + 25
#define HvCallBaseSetLogBufferFormatAndCodePage HvCallBase + 26
#define HvCallBaseWriteLogBuffer HvCallBase + 27
#define HvCallBaseRouter28 HvCallBase + 28
#define HvCallBaseRouter29 HvCallBase + 29
#define HvCallBaseRouter30 HvCallBase + 30
#define HvCallBaseSetDebugBus HvCallBase + 31
#define HvCallCcSetDABR HvCallCc + 7
static inline void HvCall_setVirtualDecr(void)
{
/*
* Ignore any error return codes - most likely means that the
* target value for the LP has been increased and this vary off
* would bring us below the new target.
*/
HvCall0(HvCallBaseSetVirtualDecr);
}
static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
{
HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm);
}
static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts)
{
HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts);
}
static inline void HvCall_setLogBufferFormatAndCodepage(int format,
u32 codePage)
{
HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage);
}
extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
static inline void HvCall_sendIPI(struct paca_struct *targetPaca)
{
HvCall1(HvCallBaseSendIPI, targetPaca->paca_index);
}
#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */

201
arch/powerpc/include/asm/iseries/hv_call_event.h
View file

@ -1,201 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This file contains the "hypervisor call" interface which is used to
* drive the hypervisor from the OS.
*/
#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <asm/iseries/hv_call_sc.h>
#include <asm/iseries/hv_types.h>
#include <asm/abs_addr.h>
struct HvLpEvent;
typedef u8 HvLpEvent_Type;
typedef u8 HvLpEvent_AckInd;
typedef u8 HvLpEvent_AckType;
typedef u8 HvLpDma_Direction;
typedef u8 HvLpDma_AddressType;
typedef u64 HvLpEvent_Rc;
typedef u64 HvLpDma_Rc;
#define HvCallEventAckLpEvent HvCallEvent + 0
#define HvCallEventCancelLpEvent HvCallEvent + 1
#define HvCallEventCloseLpEventPath HvCallEvent + 2
#define HvCallEventDmaBufList HvCallEvent + 3
#define HvCallEventDmaSingle HvCallEvent + 4
#define HvCallEventDmaToSp HvCallEvent + 5
#define HvCallEventGetOverflowLpEvents HvCallEvent + 6
#define HvCallEventGetSourceLpInstanceId HvCallEvent + 7
#define HvCallEventGetTargetLpInstanceId HvCallEvent + 8
#define HvCallEventOpenLpEventPath HvCallEvent + 9
#define HvCallEventSetLpEventStack HvCallEvent + 10
#define HvCallEventSignalLpEvent HvCallEvent + 11
#define HvCallEventSignalLpEventParms HvCallEvent + 12
#define HvCallEventSetInterLpQueueIndex HvCallEvent + 13
#define HvCallEventSetLpEventQueueInterruptProc HvCallEvent + 14
#define HvCallEventRouter15 HvCallEvent + 15
static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
{
HvCall1(HvCallEventGetOverflowLpEvents, queueIndex);
}
static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
{
HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex);
}
static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
char *eventStackAddr, u32 eventStackSize)
{
HvCall3(HvCallEventSetLpEventStack, queueIndex,
virt_to_abs(eventStackAddr), eventStackSize);
}
static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
u16 lpLogicalProcIndex)
{
HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
lpLogicalProcIndex);
}
static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
{
return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event));
}
static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
HvLpInstanceId targetInstanceId, u64 correlationToken,
u64 eventData1, u64 eventData2, u64 eventData3,
u64 eventData4, u64 eventData5)
{
/* Pack the misc bits into a single Dword to pass to PLIC */
union {
struct {
u8 ack_and_target;
u8 type;
u16 subtype;
HvLpInstanceId src_inst;
HvLpInstanceId target_inst;
} parms;
u64 dword;
} packed;
packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp;
packed.parms.type = type;
packed.parms.subtype = subtype;
packed.parms.src_inst = sourceInstanceId;
packed.parms.target_inst = targetInstanceId;
return HvCall7(HvCallEventSignalLpEventParms, packed.dword,
correlationToken, eventData1, eventData2,
eventData3, eventData4, eventData5);
}
extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
enum dma_data_direction direction);
extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction);
static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
{
return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
}
static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
{
return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event));
}
static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
HvLpIndex targetLp, HvLpEvent_Type type)
{
return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
}
static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
HvLpIndex targetLp, HvLpEvent_Type type)
{
return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
}
static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
HvLpEvent_Type type)
{
HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
}
static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
HvLpEvent_Type type)
{
HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
}
static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
HvLpIndex remoteLp, HvLpDma_Direction direction,
HvLpInstanceId localInstanceId,
HvLpInstanceId remoteInstanceId,
HvLpDma_AddressType localAddressType,
HvLpDma_AddressType remoteAddressType,
/* Do these need to be converted to absolute addresses? */
u64 localBufList, u64 remoteBufList, u32 transferLength)
{
/* Pack the misc bits into a single Dword to pass to PLIC */
union {
struct {
u8 flags;
HvLpIndex remote;
u8 type;
u8 reserved;
HvLpInstanceId local_inst;
HvLpInstanceId remote_inst;
} parms;
u64 dword;
} packed;
packed.parms.flags = (direction << 7) |
(localAddressType << 6) | (remoteAddressType << 5);
packed.parms.remote = remoteLp;
packed.parms.type = type;
packed.parms.reserved = 0;
packed.parms.local_inst = localInstanceId;
packed.parms.remote_inst = remoteInstanceId;
return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList,
remoteBufList, transferLength);
}
static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote,
u32 length, HvLpDma_Direction dir)
{
return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote,
length, dir);
}
#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */

50
arch/powerpc/include/asm/iseries/hv_call_sc.h
View file

@ -1,50 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H
#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H
#include <linux/types.h>
#define HvCallBase 0x8000000000000000ul
#define HvCallCc 0x8001000000000000ul
#define HvCallCfg 0x8002000000000000ul
#define HvCallEvent 0x8003000000000000ul
#define HvCallHpt 0x8004000000000000ul
#define HvCallPci 0x8005000000000000ul
#define HvCallSm 0x8007000000000000ul
#define HvCallXm 0x8009000000000000ul
extern u64 HvCall0(u64);
extern u64 HvCall1(u64, u64);
extern u64 HvCall2(u64, u64, u64);
extern u64 HvCall3(u64, u64, u64, u64);
extern u64 HvCall4(u64, u64, u64, u64, u64);
extern u64 HvCall5(u64, u64, u64, u64, u64, u64);
extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64);
extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64);
extern u64 HvCall0Ret16(u64, void *);
extern u64 HvCall1Ret16(u64, void *, u64);
extern u64 HvCall2Ret16(u64, void *, u64, u64);
extern u64 HvCall3Ret16(u64, void *, u64, u64, u64);
extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64);
extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64);
extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64);
extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64);
#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */

61
arch/powerpc/include/asm/iseries/hv_call_xm.h
View file

@ -1,61 +0,0 @@
/*
* This file contains the "hypervisor call" interface which is used to
* drive the hypervisor from SLIC.
*/
#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H
#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H
#include <asm/iseries/hv_call_sc.h>
#include <asm/iseries/hv_types.h>
#define HvCallXmGetTceTableParms HvCallXm + 0
#define HvCallXmTestBus HvCallXm + 1
#define HvCallXmConnectBusUnit HvCallXm + 2
#define HvCallXmLoadTod HvCallXm + 8
#define HvCallXmTestBusUnit HvCallXm + 9
#define HvCallXmSetTce HvCallXm + 11
#define HvCallXmSetTces HvCallXm + 13
static inline void HvCallXm_getTceTableParms(u64 cb)
{
HvCall1(HvCallXmGetTceTableParms, cb);
}
static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
{
return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce);
}
static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset,
u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
{
return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
tce1, tce2, tce3, tce4);
}
static inline u64 HvCallXm_testBus(u16 busNumber)
{
return HvCall1(HvCallXmTestBus, busNumber);
}
static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber,
u8 deviceId)
{
return HvCall2(HvCallXmTestBusUnit, busNumber,
(subBusNumber << 8) | deviceId);
}
static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber,
u8 deviceId, u64 interruptToken)
{
return HvCall5(HvCallXmConnectBusUnit, busNumber,
(subBusNumber << 8) | deviceId, interruptToken, 0,
0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */);
}
static inline u64 HvCallXm_loadTod(void)
{
return HvCall0(HvCallXmLoadTod);
}
#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */

128
arch/powerpc/include/asm/iseries/hv_lp_config.h
View file

@ -1,128 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
/*
* This file contains the interface to the LPAR configuration data
* to determine which resources should be allocated to each partition.
*/
#include <asm/iseries/hv_call_sc.h>
#include <asm/iseries/hv_types.h>
enum {
HvCallCfg_Cur = 0,
HvCallCfg_Init = 1,
HvCallCfg_Max = 2,
HvCallCfg_Min = 3
};
#define HvCallCfgGetSystemPhysicalProcessors HvCallCfg + 6
#define HvCallCfgGetPhysicalProcessors HvCallCfg + 7
#define HvCallCfgGetMsChunks HvCallCfg + 9
#define HvCallCfgGetSharedPoolIndex HvCallCfg + 20
#define HvCallCfgGetSharedProcUnits HvCallCfg + 21
#define HvCallCfgGetNumProcsInSharedPool HvCallCfg + 22
#define HvCallCfgGetVirtualLanIndexMap HvCallCfg + 30
#define HvCallCfgGetHostingLpIndex HvCallCfg + 32
extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
extern HvLpIndex HvLpConfig_getLpIndex(void);
extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void);
static inline u64 HvLpConfig_getMsChunks(void)
{
return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(),
HvCallCfg_Cur);
}
static inline u64 HvLpConfig_getSystemPhysicalProcessors(void)
{
return HvCall0(HvCallCfgGetSystemPhysicalProcessors);
}
static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
{
return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI);
}
static inline u64 HvLpConfig_getPhysicalProcessors(void)
{
return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
HvCallCfg_Cur);
}
static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void)
{
return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex());
}
static inline u64 HvLpConfig_getSharedProcUnits(void)
{
return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
HvCallCfg_Cur);
}
static inline u64 HvLpConfig_getMaxSharedProcUnits(void)
{
return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
HvCallCfg_Max);
}
static inline u64 HvLpConfig_getMaxPhysicalProcessors(void)
{
return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
HvCallCfg_Max);
}
static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp(
HvLpIndex lp)
{
/*
* This is a new function in V5R1 so calls to this on older
* hypervisors will return -1
*/
u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
if (retVal == -1)
retVal = 0;
return retVal;
}
static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void)
{
return HvLpConfig_getVirtualLanIndexMapForLp(
HvLpConfig_getLpIndex_outline());
}
static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1,
HvLpIndex lp2)
{
HvLpVirtualLanIndexMap virtualLanIndexMap1 =
HvLpConfig_getVirtualLanIndexMapForLp(lp1);
HvLpVirtualLanIndexMap virtualLanIndexMap2 =
HvLpConfig_getVirtualLanIndexMapForLp(lp2);
return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
}
static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp)
{
return HvCall1(HvCallCfgGetHostingLpIndex, lp);
}
#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */

162
arch/powerpc/include/asm/iseries/hv_lp_event.h
View file

@ -1,162 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* This file contains the class for HV events in the system. */
#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
#include <asm/types.h>
#include <asm/ptrace.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_call_event.h>
/*
* HvLpEvent is the structure for Lp Event messages passed between
* partitions through PLIC.
*/
struct HvLpEvent {
u8 flags; /* Event flags x00-x00 */
u8 xType; /* Type of message x01-x01 */
u16 xSubtype; /* Subtype for event x02-x03 */
u8 xSourceLp; /* Source LP x04-x04 */
u8 xTargetLp; /* Target LP x05-x05 */
u8 xSizeMinus1; /* Size of Derived class - 1 x06-x06 */
u8 xRc; /* RC for Ack flows x07-x07 */
u16 xSourceInstanceId; /* Source sides instance id x08-x09 */
u16 xTargetInstanceId; /* Target sides instance id x0A-x0B */
union {
u32 xSubtypeData; /* Data usable by the subtype x0C-x0F */
u16 xSubtypeDataShort[2]; /* Data as 2 shorts */
u8 xSubtypeDataChar[4]; /* Data as 4 chars */
} x;
u64 xCorrelationToken; /* Unique value for source/type x10-x17 */
};
typedef void (*LpEventHandler)(struct HvLpEvent *);
/* Register a handler for an event type - returns 0 on success */
extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType,
LpEventHandler hdlr);
/*
* Unregister a handler for an event type
*
* This call will sleep until the handler being removed is guaranteed to
* be no longer executing on any CPU. Do not call with locks held.
*
* returns 0 on success
* Unregister will fail if there are any paths open for the type
*/
extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType);
/*
* Open an Lp Event Path for an event type
* returns 0 on success
* openPath will fail if there is no handler registered for the event type.
* The lpIndex specified is the partition index for the target partition
* (for VirtualIo, VirtualLan and SessionMgr) other types specify zero)
*/
extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
/*
* Close an Lp Event Path for a type and partition
* returns 0 on success
*/
extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
#define HvLpEvent_Type_Hypervisor 0
#define HvLpEvent_Type_MachineFac 1
#define HvLpEvent_Type_SessionMgr 2
#define HvLpEvent_Type_SpdIo 3
#define HvLpEvent_Type_VirtualBus 4
#define HvLpEvent_Type_PciIo 5
#define HvLpEvent_Type_RioIo 6
#define HvLpEvent_Type_VirtualLan 7
#define HvLpEvent_Type_VirtualIo 8
#define HvLpEvent_Type_NumTypes 9
#define HvLpEvent_Rc_Good 0
#define HvLpEvent_Rc_BufferNotAvailable 1
#define HvLpEvent_Rc_Cancelled 2
#define HvLpEvent_Rc_GenericError 3
#define HvLpEvent_Rc_InvalidAddress 4
#define HvLpEvent_Rc_InvalidPartition 5
#define HvLpEvent_Rc_InvalidSize 6
#define HvLpEvent_Rc_InvalidSubtype 7
#define HvLpEvent_Rc_InvalidSubtypeData 8
#define HvLpEvent_Rc_InvalidType 9
#define HvLpEvent_Rc_PartitionDead 10
#define HvLpEvent_Rc_PathClosed 11
#define HvLpEvent_Rc_SubtypeError 12
#define HvLpEvent_Function_Ack 0
#define HvLpEvent_Function_Int 1
#define HvLpEvent_AckInd_NoAck 0
#define HvLpEvent_AckInd_DoAck 1
#define HvLpEvent_AckType_ImmediateAck 0
#define HvLpEvent_AckType_DeferredAck 1
#define HV_LP_EVENT_INT 0x01
#define HV_LP_EVENT_DO_ACK 0x02
#define HV_LP_EVENT_DEFERRED_ACK 0x04
#define HV_LP_EVENT_VALID 0x80
#define HvLpDma_Direction_LocalToRemote 0
#define HvLpDma_Direction_RemoteToLocal 1
#define HvLpDma_AddressType_TceIndex 0
#define HvLpDma_AddressType_RealAddress 1
#define HvLpDma_Rc_Good 0
#define HvLpDma_Rc_Error 1
#define HvLpDma_Rc_PartitionDead 2
#define HvLpDma_Rc_PathClosed 3
#define HvLpDma_Rc_InvalidAddress 4
#define HvLpDma_Rc_InvalidLength 5
static inline int hvlpevent_is_valid(struct HvLpEvent *h)
{
return h->flags & HV_LP_EVENT_VALID;
}
static inline void hvlpevent_invalidate(struct HvLpEvent *h)
{
h->flags &= ~ HV_LP_EVENT_VALID;
}
static inline int hvlpevent_is_int(struct HvLpEvent *h)
{
return h->flags & HV_LP_EVENT_INT;
}
static inline int hvlpevent_is_ack(struct HvLpEvent *h)
{
return !hvlpevent_is_int(h);
}
static inline int hvlpevent_need_ack(struct HvLpEvent *h)
{
return h->flags & HV_LP_EVENT_DO_ACK;
}
#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */

112
arch/powerpc/include/asm/iseries/hv_types.h
View file

@ -1,112 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H
#define _ASM_POWERPC_ISERIES_HV_TYPES_H
/*
* General typedefs for the hypervisor.
*/
#include <asm/types.h>
typedef u8 HvLpIndex;
typedef u16 HvLpInstanceId;
typedef u64 HvLpTOD;
typedef u64 HvLpSystemSerialNum;
typedef u8 HvLpDeviceSerialNum[12];
typedef u16 HvLpSanHwSet;
typedef u16 HvLpBus;
typedef u16 HvLpBoard;
typedef u16 HvLpCard;
typedef u8 HvLpDeviceType[4];
typedef u8 HvLpDeviceModel[3];
typedef u64 HvIoToken;
typedef u8 HvLpName[8];
typedef u32 HvIoId;
typedef u64 HvRealMemoryIndex;
typedef u32 HvLpIndexMap; /* Must hold HVMAXARCHITECTEDLPS bits!!! */
typedef u16 HvLpVrmIndex;
typedef u32 HvXmGenerationId;
typedef u8 HvLpBusPool;
typedef u8 HvLpSharedPoolIndex;
typedef u16 HvLpSharedProcUnitsX100;
typedef u8 HvLpVirtualLanIndex;
typedef u16 HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */
typedef u16 HvBusNumber; /* Hypervisor Bus Number */
typedef u8 HvSubBusNumber; /* Hypervisor SubBus Number */
typedef u8 HvAgentId; /* Hypervisor DevFn */
#define HVMAXARCHITECTEDLPS 32
#define HVMAXARCHITECTEDVIRTUALLANS 16
#define HVMAXARCHITECTEDVIRTUALDISKS 32
#define HVMAXARCHITECTEDVIRTUALCDROMS 8
#define HVMAXARCHITECTEDVIRTUALTAPES 8
#define HVCHUNKSIZE (256 * 1024)
#define HVPAGESIZE (4 * 1024)
#define HVLPMINMEGSPRIMARY 256
#define HVLPMINMEGSSECONDARY 64
#define HVCHUNKSPERMEG 4
#define HVPAGESPERMEG 256
#define HVPAGESPERCHUNK 64
#define HvLpIndexInvalid ((HvLpIndex)0xff)
/*
* Enums for the sub-components under PLIC
* Used in HvCall and HvPrimaryCall
*/
enum {
HvCallCompId = 0,
HvCallCpuCtlsCompId = 1,
HvCallCfgCompId = 2,
HvCallEventCompId = 3,
HvCallHptCompId = 4,
HvCallPciCompId = 5,
HvCallSlmCompId = 6,
HvCallSmCompId = 7,
HvCallSpdCompId = 8,
HvCallXmCompId = 9,
HvCallRioCompId = 10,
HvCallRsvd3CompId = 11,
HvCallRsvd2CompId = 12,
HvCallRsvd1CompId = 13,
HvCallMaxCompId = 14,
HvPrimaryCallCompId = 0,
HvPrimaryCallCfgCompId = 1,
HvPrimaryCallPciCompId = 2,
HvPrimaryCallSmCompId = 3,
HvPrimaryCallSpdCompId = 4,
HvPrimaryCallXmCompId = 5,
HvPrimaryCallRioCompId = 6,
HvPrimaryCallRsvd7CompId = 7,
HvPrimaryCallRsvd6CompId = 8,
HvPrimaryCallRsvd5CompId = 9,
HvPrimaryCallRsvd4CompId = 10,
HvPrimaryCallRsvd3CompId = 11,
HvPrimaryCallRsvd2CompId = 12,
HvPrimaryCallRsvd1CompId = 13,
HvPrimaryCallMaxCompId = HvCallMaxCompId
};
struct HvLpBufferList {
u64 addr;
u64 len;
};
#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */

37
arch/powerpc/include/asm/iseries/iommu.h
View file

@ -1,37 +0,0 @@
#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
#define _ASM_POWERPC_ISERIES_IOMMU_H
/*
* Copyright (C) 2005 Stephen Rothwell, IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the:
* Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330,
* Boston, MA 02111-1307 USA
*/
struct pci_dev;
struct vio_dev;
struct device_node;
struct iommu_table;
/* Get table parameters from HV */
extern void iommu_table_getparms_iSeries(unsigned long busno,
unsigned char slotno, unsigned char virtbus,
struct iommu_table *tbl);
extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
extern void iommu_vio_init(void);
#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */

78
arch/powerpc/include/asm/iseries/it_lp_queue.h
View file

@ -1,78 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
/*
* This control block defines the simple LP queue structure that is
* shared between the hypervisor (PLIC) and the OS in order to send
* events to an LP.
*/
#include <asm/types.h>
#include <asm/ptrace.h>
#define IT_LP_MAX_QUEUES 8
#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */
#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */
#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */
#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */
#define IT_LP_EVENT_STACK_SIZE 4096
#define IT_LP_EVENT_MAX_SIZE 256
#define IT_LP_EVENT_ALIGN 64
struct hvlpevent_queue {
/*
* The hq_current_event is the pointer to the next event stack entry
* that will become valid. The OS must peek at this entry to determine
* if it is valid. PLIC will set the valid indicator as the very last
* store into that entry.
*
* When the OS has completed processing of the event then it will mark
* the event as invalid so that PLIC knows it can store into that event
* location again.
*
* If the event stack fills and there are overflow events, then PLIC
* will set the hq_overflow_pending flag in which case the OS will
* have to fetch the additional LP events once they have drained the
* event stack.
*
* The first 16-bytes are known by both the OS and PLIC. The remainder
* of the cache line is for use by the OS.
*/
u8 hq_overflow_pending; /* 0x00 Overflow events are pending */
u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */
u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */
u8 hq_reserved1[12]; /* 0x04 */
char *hq_current_event; /* 0x10 */
char *hq_last_event; /* 0x18 */
char *hq_event_stack; /* 0x20 */
u8 hq_index; /* 0x28 unique sequential index. */
u8 hq_reserved2[3]; /* 0x29-2b */
spinlock_t hq_lock;
};
extern struct hvlpevent_queue hvlpevent_queue;
extern int hvlpevent_is_pending(void);
extern void process_hvlpevents(void);
extern void setup_hvlpevent_queue(void);
#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */

85
arch/powerpc/include/asm/iseries/lpar_map.h
View file

@ -1,85 +0,0 @@
/*
* Copyright (C) 2001 Mike Corrigan IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H
#define _ASM_POWERPC_ISERIES_LPAR_MAP_H
#ifndef __ASSEMBLY__
#include <asm/types.h>
#endif
/*
* The iSeries hypervisor will set up mapping for one or more
* ESID/VSID pairs (in SLB/segment registers) and will set up
* mappings of one or more ranges of pages to VAs.
* We will have the hypervisor set up the ESID->VSID mapping
* for the four kernel segments (C-F). With shared processors,
* the hypervisor will clear all segment registers and reload
* these four whenever the processor is switched from one
* partition to another.
*/
/* The Vsid and Esid identified below will be used by the hypervisor
* to set up a memory mapping for part of the load area before giving
* control to the Linux kernel. The load area is 64 MB, but this must
* not attempt to map the whole load area. The Hashed Page Table may
* need to be located within the load area (if the total partition size
* is 64 MB), but cannot be mapped. Typically, this should specify
* to map half (32 MB) of the load area.
*
* The hypervisor will set up page table entries for the number of
* pages specified.
*
* In 32-bit mode, the hypervisor will load all four of the
* segment registers (identified by the low-order four bits of the
* Esid field. In 64-bit mode, the hypervisor will load one SLB
* entry to map the Esid to the Vsid.
*/
#define HvEsidsToMap 2
#define HvRangesToMap 1
/* Hypervisor initially maps 32MB of the load area */
#define HvPagesToMap 8192
#ifndef __ASSEMBLY__
struct LparMap {
u64 xNumberEsids; // Number of ESID/VSID pairs
u64 xNumberRanges; // Number of VA ranges to map
u64 xSegmentTableOffs; // Page number within load area of seg table
u64 xRsvd[5];
struct {
u64 xKernelEsid; // Esid used to map kernel load
u64 xKernelVsid; // Vsid used to map kernel load
} xEsids[HvEsidsToMap];
struct {
u64 xPages; // Number of pages to be mapped
u64 xOffset; // Offset from start of load area
u64 xVPN; // Virtual Page Number
} xRanges[HvRangesToMap];
};
extern const struct LparMap xLparMap;
#endif /* __ASSEMBLY__ */
/* the fixed address where the LparMap exists */
#define LPARMAP_PHYS 0x7000
#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */

51
arch/powerpc/include/asm/iseries/mf.h
View file

@ -1,51 +0,0 @@
/*
* Copyright (C) 2001 Troy D. Armstrong IBM Corporation
* Copyright (C) 2004 Stephen Rothwell IBM Corporation
*
* This modules exists as an interface between a Linux secondary partition
* running on an iSeries and the primary partition's Virtual Service
* Processor (VSP) object. The VSP has final authority over powering on/off
* all partitions in the iSeries. It also provides miscellaneous low-level
* machine facility type operations.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_ISERIES_MF_H
#define _ASM_POWERPC_ISERIES_MF_H
#include <linux/types.h>
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_call_event.h>
struct rtc_time;
typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
unsigned size, unsigned amount, MFCompleteHandler hdlr,
void *userToken);
extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
unsigned count, MFCompleteHandler hdlr, void *userToken);
extern void mf_power_off(void);
extern void mf_reboot(char *cmd);
extern void mf_display_src(u32 word);
extern void mf_display_progress(u16 value);
extern void mf_init(void);
#endif /* _ASM_POWERPC_ISERIES_MF_H */

265
arch/powerpc/include/asm/iseries/vio.h
View file

@ -1,265 +0,0 @@
/* -*- linux-c -*-
*
* iSeries Virtual I/O Message Path header
*
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
*
* (C) Copyright 2000 IBM Corporation
*
* This header file is used by the iSeries virtual I/O device
* drivers. It defines the interfaces to the common functions
* (implemented in drivers/char/viopath.h) as well as defining
* common functions and structures. Currently (at the time I
* wrote this comment) the iSeries virtual I/O device drivers
* that use this are
* drivers/block/viodasd.c
* drivers/char/viocons.c
* drivers/char/viotape.c
* drivers/cdrom/viocd.c
*
* The iSeries virtual ethernet support (veth.c) uses a whole
* different set of functions.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) anyu later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ASM_POWERPC_ISERIES_VIO_H
#define _ASM_POWERPC_ISERIES_VIO_H
#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_event.h>
/*
* iSeries virtual I/O events use the subtype field in
* HvLpEvent to figure out what kind of vio event is coming
* in. We use a table to route these, and this defines
* the maximum number of distinct subtypes
*/
#define VIO_MAX_SUBTYPES 8
#define VIOMAXBLOCKDMA 12
struct open_data {
u64 disk_size;
u16 max_disk;
u16 cylinders;
u16 tracks;
u16 sectors;
u16 bytes_per_sector;
};
struct rw_data {
u64 offset;
struct {
u32 token;
u32 reserved;
u64 len;
} dma_info[VIOMAXBLOCKDMA];
};
struct vioblocklpevent {
struct HvLpEvent event;
u32 reserved;
u16 version;
u16 sub_result;
u16 disk;
u16 flags;
union {
struct open_data open_data;
struct rw_data rw_data;
u64 changed;
} u;
};
#define vioblockflags_ro 0x0001
enum vioblocksubtype {
vioblockopen = 0x0001,
vioblockclose = 0x0002,
vioblockread = 0x0003,
vioblockwrite = 0x0004,
vioblockflush = 0x0005,
vioblockcheck = 0x0007
};
struct viocdlpevent {
struct HvLpEvent event;
u32 reserved;
u16 version;
u16 sub_result;
u16 disk;
u16 flags;
u32 token;
u64 offset; /* On open, max number of disks */
u64 len; /* On open, size of the disk */
u32 block_size; /* Only set on open */
u32 media_size; /* Only set on open */
};
enum viocdsubtype {
viocdopen = 0x0001,
viocdclose = 0x0002,
viocdread = 0x0003,
viocdwrite = 0x0004,
viocdlockdoor = 0x0005,
viocdgetinfo = 0x0006,
viocdcheck = 0x0007
};
struct viotapelpevent {
struct HvLpEvent event;
u32 reserved;
u16 version;
u16 sub_type_result;
u16 tape;
u16 flags;
u32 token;
u64 len;
union {
struct {
u32 tape_op;
u32 count;
} op;
struct {
u32 type;
u32 resid;
u32 dsreg;
u32 gstat;
u32 erreg;
u32 file_no;
u32 block_no;
} get_status;
struct {
u32 block_no;
} get_pos;
} u;
};
enum viotapesubtype {
viotapeopen = 0x0001,
viotapeclose = 0x0002,
viotaperead = 0x0003,
viotapewrite = 0x0004,
viotapegetinfo = 0x0005,
viotapeop = 0x0006,
viotapegetpos = 0x0007,
viotapesetpos = 0x0008,
viotapegetstatus = 0x0009
};
/*
* Each subtype can register a handler to process their events.
* The handler must have this interface.
*/
typedef void (vio_event_handler_t) (struct HvLpEvent * event);
extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
extern int vio_setHandler(int subtype, vio_event_handler_t * beh);
extern int vio_clearHandler(int subtype);
extern int viopath_isactive(HvLpIndex lp);
extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
extern HvLpInstanceId viopath_targetinst(HvLpIndex lp);
extern void vio_set_hostlp(void);
extern void *vio_get_event_buffer(int subtype);
extern void vio_free_event_buffer(int subtype, void *buffer);
extern struct vio_dev *vio_create_viodasd(u32 unit);
extern HvLpIndex viopath_hostLp;
extern HvLpIndex viopath_ourLp;
#define VIOCHAR_MAX_DATA 200
#define VIOMAJOR_SUBTYPE_MASK 0xff00
#define VIOMINOR_SUBTYPE_MASK 0x00ff
#define VIOMAJOR_SUBTYPE_SHIFT 8
#define VIOVERSION 0x0101
/*
* This is the general structure for VIO errors; each module should have
* a table of them, and each table should be terminated by an entry of
* { 0, 0, NULL }. Then, to find a specific error message, a module
* should pass its local table and the return code.
*/
struct vio_error_entry {
u16 rc;
int errno;
const char *msg;
};
extern const struct vio_error_entry *vio_lookup_rc(
const struct vio_error_entry *local_table, u16 rc);
enum viosubtypes {
viomajorsubtype_monitor = 0x0100,
viomajorsubtype_blockio = 0x0200,
viomajorsubtype_chario = 0x0300,
viomajorsubtype_config = 0x0400,
viomajorsubtype_cdio = 0x0500,
viomajorsubtype_tape = 0x0600,
viomajorsubtype_scsi = 0x0700
};
enum vioconfigsubtype {
vioconfigget = 0x0001,
};
enum viorc {
viorc_good = 0x0000,
viorc_noConnection = 0x0001,
viorc_noReceiver = 0x0002,
viorc_noBufferAvailable = 0x0003,
viorc_invalidMessageType = 0x0004,
viorc_invalidRange = 0x0201,
viorc_invalidToken = 0x0202,
viorc_DMAError = 0x0203,
viorc_useError = 0x0204,
viorc_releaseError = 0x0205,
viorc_invalidDisk = 0x0206,
viorc_openRejected = 0x0301
};
/*
* The structure of the events that flow between us and OS/400 for chario
* events. You can't mess with this unless the OS/400 side changes too.
*/
struct viocharlpevent {
struct HvLpEvent event;
u32 reserved;
u16 version;
u16 subtype_result_code;
u8 virtual_device;
u8 len;
u8 data[VIOCHAR_MAX_DATA];
};
#define VIOCHAR_WINDOW 10
enum viocharsubtype {
viocharopen = 0x0001,
viocharclose = 0x0002,
viochardata = 0x0003,
viocharack = 0x0004,
viocharconfig = 0x0005
};
enum viochar_rc {
viochar_rc_ebusy = 1
};
#endif /* _ASM_POWERPC_ISERIES_VIO_H */

8
arch/powerpc/include/asm/lppaca.h
View file

@ -41,15 +41,7 @@
* We only have to have statically allocated lppaca structs on
* legacy iSeries, which supports at most 64 cpus.
*/
#ifdef CONFIG_PPC_ISERIES
#if NR_CPUS < 64
#define NR_LPPACAS NR_CPUS
#else
#define NR_LPPACAS 64
#endif
#else /* not iSeries */
#define NR_LPPACAS 1
#endif
/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k

9
arch/powerpc/include/asm/mpic.h
View file

@ -273,7 +273,6 @@ struct mpic
unsigned int isu_size;
unsigned int isu_shift;
unsigned int isu_mask;
unsigned int irq_count;
/* Number of sources */
unsigned int num_sources;
/* default senses array */
@ -349,8 +348,6 @@ struct mpic
#define MPIC_U3_HT_IRQS 0x00000004
/* Broken IPI registers (autodetected) */
#define MPIC_BROKEN_IPI 0x00000008
/* MPIC wants a reset */
#define MPIC_WANTS_RESET 0x00000010
/* Spurious vector requires EOI */
#define MPIC_SPV_EOI 0x00000020
/* No passthrough disable */
@ -363,15 +360,11 @@ struct mpic
#define MPIC_ENABLE_MCK 0x00000200
/* Disable bias among target selection, spread interrupts evenly */
#define MPIC_NO_BIAS 0x00000400
/* Ignore NIRQS as reported by FRR */
#define MPIC_BROKEN_FRR_NIRQS 0x00000800
/* Destination only supports a single CPU at a time */
#define MPIC_SINGLE_DEST_CPU 0x00001000
/* Enable CoreInt delivery of interrupts */
#define MPIC_ENABLE_COREINT 0x00002000
/* Disable resetting of the MPIC.
* NOTE: This flag trumps MPIC_WANTS_RESET.
*/
/* Do not reset the MPIC during initialization */
#define MPIC_NO_RESET 0x00004000
/* Freescale MPIC (compatible includes "fsl,mpic") */
#define MPIC_FSL 0x00008000

Some files were not shown because too many files have changed in this diff Show more