packet: allow to transmit +4 byte in TX_RING slot for VLAN case
Commit57f89bfa21
("network: Allow af_packet to transmit +4 bytes for VLAN packets.") added the possibility for non-mmaped frames to send extra 4 byte for VLAN header so the MTU increases from 1500 to 1504 byte, for example. Commitcbd89acb9e
("af_packet: fix for sending VLAN frames via packet_mmap") attempted to fix that for the mmap part but was reverted as it caused regressions while using eth_type_trans() on output path. Lets just act analogous to57f89bfa21
and add a similar logic to TX_RING. We presume size_max as overcharged with +4 bytes and later on after skb has been built by tpacket_fill_skb() check for ETH_P_8021Q header on packets larger than normal MTU. Can be easily reproduced with a slightly modified trafgen in mmap(2) mode, test cases: { fill(0xff, 12) const16(0x8100) fill(0xff, <1504|1505>) } { fill(0xff, 12) const16(0x0806) fill(0xff, <1500|1501>) } Note that we need to do the test right after tpacket_fill_skb() as sockets can have PACKET_LOSS set where we would not fail but instead just continue to traverse the ring. Reported-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Phil Sutter <phil@nwl.cc> Tested-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
07cb1c175e
commit
52f1454f62
1 changed files with 13 additions and 3 deletions
|
@ -2257,8 +2257,7 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
|
|||
if (unlikely(!(dev->flags & IFF_UP)))
|
||||
goto out_put;
|
||||
|
||||
reserve = dev->hard_header_len;
|
||||
|
||||
reserve = dev->hard_header_len + VLAN_HLEN;
|
||||
size_max = po->tx_ring.frame_size
|
||||
- (po->tp_hdrlen - sizeof(struct sockaddr_ll));
|
||||
|
||||
|
@ -2285,8 +2284,19 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg)
|
|||
goto out_status;
|
||||
|
||||
tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto,
|
||||
addr, hlen);
|
||||
addr, hlen);
|
||||
if (tp_len > dev->mtu + dev->hard_header_len) {
|
||||
struct ethhdr *ehdr;
|
||||
/* Earlier code assumed this would be a VLAN pkt,
|
||||
* double-check this now that we have the actual
|
||||
* packet in hand.
|
||||
*/
|
||||
|
||||
skb_reset_mac_header(skb);
|
||||
ehdr = eth_hdr(skb);
|
||||
if (ehdr->h_proto != htons(ETH_P_8021Q))
|
||||
tp_len = -EMSGSIZE;
|
||||
}
|
||||
if (unlikely(tp_len < 0)) {
|
||||
if (po->tp_loss) {
|
||||
__packet_set_status(po, ph,
|
||||
|
|
Loading…
Reference in a new issue