Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support

Browse source 
This patch adds new enums and macros to enable T4 configuration file support. It
also removes duplicate macro definitions.

It fixes the build failure in cxgb4vf driver introduced because of old macro
definition removal.

It also performs SGE initialization based on T4 configuration file is provided
or not. If it is provided then it uses the parameters provided in it otherwise
it uses hard coded values.

Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vipul Pandya 2012-09-26 02:39:38 +00:00 committed by David S. Miller
parent 5afc8b84eb
commit 52367a763d
5 changed files with 367 additions and 73 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
View file

@ -315,6 +315,9 @@ enum { /* adapter flags */
USING_MSI = (1 << 1),
USING_MSIX = (1 << 2),
FW_OK = (1 << 4),
USING_SOFT_PARAMS = (1 << 6),
MASTER_PF = (1 << 7),
FW_OFLD_CONN = (1 << 9),
};
struct rx_sw_desc;
@ -467,6 +470,11 @@ struct sge {
u16 rdma_rxq[NCHAN];
u16 timer_val[SGE_NTIMERS];
u8 counter_val[SGE_NCOUNTERS];
u32 fl_pg_order; /* large page allocation size */
u32 stat_len; /* length of status page at ring end */
u32 pktshift; /* padding between CPL & packet data */
u32 fl_align; /* response queue message alignment */
u32 fl_starve_thres; /* Free List starvation threshold */
unsigned int starve_thres;
u8 idma_state[2];
unsigned int egr_start;
@ -619,7 +627,7 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
struct net_device *dev, unsigned int iqid);
irqreturn_t t4_sge_intr_msix(int irq, void *cookie);
void t4_sge_init(struct adapter *adap);
int t4_sge_init(struct adapter *adap);
void t4_sge_start(struct adapter *adap);
void t4_sge_stop(struct adapter *adap);
extern int dbfifo_int_thresh;
@ -638,6 +646,14 @@ static inline unsigned int us_to_core_ticks(const struct adapter *adap,
return (us * adap->params.vpd.cclk) / 1000;
}
static inline unsigned int core_ticks_to_us(const struct adapter *adapter,
unsigned int ticks)
{
/* add Core Clock / 2 to round ticks to nearest uS */
return ((ticks * 1000 + adapter->params.vpd.cclk/2) /
adapter->params.vpd.cclk);
}
void t4_set_reg_field(struct adapter *adap, unsigned int addr, u32 mask,
u32 val);

341
drivers/net/ethernet/chelsio/cxgb4/sge.c
View file

@ -68,9 +68,6 @@
*/
#define RX_PKT_SKB_LEN 512
/* Ethernet header padding prepended to RX_PKTs */
#define RX_PKT_PAD 2
/*
* Max number of Tx descriptors we clean up at a time. Should be modest as
* freeing skbs isn't cheap and it happens while holding locks. We just need
@ -137,13 +134,6 @@
*/
#define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN
enum {
/* packet alignment in FL buffers */
FL_ALIGN = L1_CACHE_BYTES < 32 ? 32 : L1_CACHE_BYTES,
/* egress status entry size */
STAT_LEN = L1_CACHE_BYTES > 64 ? 128 : 64
};
struct tx_sw_desc { /* SW state per Tx descriptor */
struct sk_buff *skb;
struct ulptx_sgl *sgl;
@ -155,16 +145,57 @@ struct rx_sw_desc { /* SW state per Rx descriptor */
};
/*
* The low bits of rx_sw_desc.dma_addr have special meaning.
* Rx buffer sizes for "useskbs" Free List buffers (one ingress packet pe skb
* buffer). We currently only support two sizes for 1500- and 9000-byte MTUs.
* We could easily support more but there doesn't seem to be much need for
* that ...
*/
#define FL_MTU_SMALL 1500
#define FL_MTU_LARGE 9000
static inline unsigned int fl_mtu_bufsize(struct adapter *adapter,
unsigned int mtu)
{
struct sge *s = &adapter->sge;
return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align);
}
#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL)
#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE)
/*
* Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses
* these to specify the buffer size as an index into the SGE Free List Buffer
* Size register array. We also use bit 4, when the buffer has been unmapped
* for DMA, but this is of course never sent to the hardware and is only used
* to prevent double unmappings. All of the above requires that the Free List
* Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are
* 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal
* Free List Buffer alignment is 32 bytes, this works out for us ...
*/
enum {
RX_LARGE_BUF = 1 << 0, /* buffer is larger than PAGE_SIZE */
RX_UNMAPPED_BUF = 1 << 1, /* buffer is not mapped */
RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */
RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */
RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */
/*
* XXX We shouldn't depend on being able to use these indices.
* XXX Especially when some other Master PF has initialized the
* XXX adapter or we use the Firmware Configuration File. We
* XXX should really search through the Host Buffer Size register
* XXX array for the appropriately sized buffer indices.
*/
RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */
RX_LARGE_PG_BUF = 0x1, /* buffer large (FL_PG_ORDER) page buffer */
RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */
RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */
};
static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *d)
{
return d->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF);
return d->dma_addr & ~(dma_addr_t)RX_BUF_FLAGS;
}
static inline bool is_buf_mapped(const struct rx_sw_desc *d)
@ -392,14 +423,35 @@ static inline void reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
}
}
static inline int get_buf_size(const struct rx_sw_desc *d)
static inline int get_buf_size(struct adapter *adapter,
const struct rx_sw_desc *d)
{
#if FL_PG_ORDER > 0
return (d->dma_addr & RX_LARGE_BUF) ? (PAGE_SIZE << FL_PG_ORDER) :
PAGE_SIZE;
#else
return PAGE_SIZE;
#endif
struct sge *s = &adapter->sge;
unsigned int rx_buf_size_idx = d->dma_addr & RX_BUF_SIZE;
int buf_size;
switch (rx_buf_size_idx) {
case RX_SMALL_PG_BUF:
buf_size = PAGE_SIZE;
break;
case RX_LARGE_PG_BUF:
buf_size = PAGE_SIZE << s->fl_pg_order;
break;
case RX_SMALL_MTU_BUF:
buf_size = FL_MTU_SMALL_BUFSIZE(adapter);
break;
case RX_LARGE_MTU_BUF:
buf_size = FL_MTU_LARGE_BUFSIZE(adapter);
break;
default:
BUG_ON(1);
}
return buf_size;
}
/**
@ -418,7 +470,8 @@ static void free_rx_bufs(struct adapter *adap, struct sge_fl *q, int n)
if (is_buf_mapped(d))
dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
get_buf_size(d), PCI_DMA_FROMDEVICE);
get_buf_size(adap, d),
PCI_DMA_FROMDEVICE);
put_page(d->page);
d->page = NULL;
if (++q->cidx == q->size)
@ -444,7 +497,7 @@ static void unmap_rx_buf(struct adapter *adap, struct sge_fl *q)
if (is_buf_mapped(d))
dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
get_buf_size(d), PCI_DMA_FROMDEVICE);
get_buf_size(adap, d), PCI_DMA_FROMDEVICE);
d->page = NULL;
if (++q->cidx == q->size)
q->cidx = 0;
@ -485,6 +538,7 @@ static inline void set_rx_sw_desc(struct rx_sw_desc *sd, struct page *pg,
static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
gfp_t gfp)
{
struct sge *s = &adap->sge;
struct page *pg;
dma_addr_t mapping;
unsigned int cred = q->avail;
@ -493,25 +547,27 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
gfp |= __GFP_NOWARN | __GFP_COLD;
#if FL_PG_ORDER > 0
if (s->fl_pg_order == 0)
goto alloc_small_pages;
/*
* Prefer large buffers
*/
while (n) {
pg = alloc_pages(gfp | __GFP_COMP, FL_PG_ORDER);
pg = alloc_pages(gfp | __GFP_COMP, s->fl_pg_order);
if (unlikely(!pg)) {
q->large_alloc_failed++;
break; /* fall back to single pages */
}
mapping = dma_map_page(adap->pdev_dev, pg, 0,
PAGE_SIZE << FL_PG_ORDER,
PAGE_SIZE << s->fl_pg_order,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) {
__free_pages(pg, FL_PG_ORDER);
__free_pages(pg, s->fl_pg_order);
goto out; /* do not try small pages for this error */
}
mapping |= RX_LARGE_BUF;
mapping |= RX_LARGE_PG_BUF;
*d++ = cpu_to_be64(mapping);
set_rx_sw_desc(sd, pg, mapping);
@ -525,8 +581,8 @@ static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
}
n--;
}
#endif
alloc_small_pages:
while (n--) {
pg = __skb_alloc_page(gfp, NULL);
if (unlikely(!pg)) {
@ -1519,6 +1575,8 @@ static noinline int handle_trace_pkt(struct adapter *adap,
static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
const struct cpl_rx_pkt *pkt)
{
struct adapter *adapter = rxq->rspq.adap;
struct sge *s = &adapter->sge;
int ret;
struct sk_buff *skb;
@ -1529,8 +1587,8 @@ static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
return;
}
copy_frags(skb, gl, RX_PKT_PAD);
skb->len = gl->tot_len - RX_PKT_PAD;
copy_frags(skb, gl, s->pktshift);
skb->len = gl->tot_len - s->pktshift;
skb->data_len = skb->len;
skb->truesize += skb->data_len;
skb->ip_summed = CHECKSUM_UNNECESSARY;
@ -1566,6 +1624,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
struct sk_buff *skb;
const struct cpl_rx_pkt *pkt;
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
struct sge *s = &q->adap->sge;
if (unlikely(*(u8 *)rsp == CPL_TRACE_PKT))
return handle_trace_pkt(q->adap, si);
@ -1585,7 +1644,7 @@ int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
return 0;
}
__skb_pull(skb, RX_PKT_PAD); /* remove ethernet header padding */
__skb_pull(skb, s->pktshift); /* remove ethernet header padding */
skb->protocol = eth_type_trans(skb, q->netdev);
skb_record_rx_queue(skb, q->idx);
if (skb->dev->features & NETIF_F_RXHASH)
@ -1696,6 +1755,8 @@ static int process_responses(struct sge_rspq *q, int budget)
int budget_left = budget;
const struct rsp_ctrl *rc;
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
struct adapter *adapter = q->adap;
struct sge *s = &adapter->sge;
while (likely(budget_left)) {
rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc));
@ -1722,7 +1783,7 @@ static int process_responses(struct sge_rspq *q, int budget)
/* gather packet fragments */
for (frags = 0, fp = si.frags; ; frags++, fp++) {
rsd = &rxq->fl.sdesc[rxq->fl.cidx];
bufsz = get_buf_size(rsd);
bufsz = get_buf_size(adapter, rsd);
fp->page = rsd->page;
fp->offset = q->offset;
fp->size = min(bufsz, len);
@ -1747,7 +1808,7 @@ static int process_responses(struct sge_rspq *q, int budget)
si.nfrags = frags + 1;
ret = q->handler(q, q->cur_desc, &si);
if (likely(ret == 0))
q->offset += ALIGN(fp->size, FL_ALIGN);
q->offset += ALIGN(fp->size, s->fl_align);
else
restore_rx_bufs(&si, &rxq->fl, frags);
} else if (likely(rsp_type == RSP_TYPE_CPL)) {
@ -1983,6 +2044,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
{
int ret, flsz = 0;
struct fw_iq_cmd c;
struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Size needs to be multiple of 16, including status entry. */
@ -2015,11 +2077,11 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
fl->size = roundup(fl->size, 8);
fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64),
sizeof(struct rx_sw_desc), &fl->addr,
&fl->sdesc, STAT_LEN, NUMA_NO_NODE);
&fl->sdesc, s->stat_len, NUMA_NO_NODE);
if (!fl->desc)
goto fl_nomem;
flsz = fl->size / 8 + STAT_LEN / sizeof(struct tx_desc);
flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc);
c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN |
FW_IQ_CMD_FL0FETCHRO(1) |
FW_IQ_CMD_FL0DATARO(1) |
@ -2096,14 +2158,15 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
{
int ret, nentries;
struct fw_eq_eth_cmd c;
struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Add status entries */
nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
&txq->q.phys_addr, &txq->q.sdesc, STAT_LEN,
&txq->q.phys_addr, &txq->q.sdesc, s->stat_len,
netdev_queue_numa_node_read(netdevq));
if (!txq->q.desc)
return -ENOMEM;
@ -2149,10 +2212,11 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
{
int ret, nentries;
struct fw_eq_ctrl_cmd c;
struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Add status entries */
nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
txq->q.desc = alloc_ring(adap->pdev_dev, nentries,
sizeof(struct tx_desc), 0, &txq->q.phys_addr,
@ -2200,14 +2264,15 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
{
int ret, nentries;
struct fw_eq_ofld_cmd c;
struct sge *s = &adap->sge;
struct port_info *pi = netdev_priv(dev);
/* Add status entries */
nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
&txq->q.phys_addr, &txq->q.sdesc, STAT_LEN,
&txq->q.phys_addr, &txq->q.sdesc, s->stat_len,
NUMA_NO_NODE);
if (!txq->q.desc)
return -ENOMEM;
@ -2251,8 +2316,10 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
static void free_txq(struct adapter *adap, struct sge_txq *q)
{
struct sge *s = &adap->sge;
dma_free_coherent(adap->pdev_dev,
q->size * sizeof(struct tx_desc) + STAT_LEN,
q->size * sizeof(struct tx_desc) + s->stat_len,
q->desc, q->phys_addr);
q->cntxt_id = 0;
q->sdesc = NULL;
@ -2262,6 +2329,7 @@ static void free_txq(struct adapter *adap, struct sge_txq *q)
static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
struct sge_fl *fl)
{
struct sge *s = &adap->sge;
unsigned int fl_id = fl ? fl->cntxt_id : 0xffff;
adap->sge.ingr_map[rq->cntxt_id - adap->sge.ingr_start] = NULL;
@ -2276,7 +2344,7 @@ static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
if (fl) {
free_rx_bufs(adap, fl, fl->avail);
dma_free_coherent(adap->pdev_dev, fl->size * 8 + STAT_LEN,
dma_free_coherent(adap->pdev_dev, fl->size * 8 + s->stat_len,
fl->desc, fl->addr);
kfree(fl->sdesc);
fl->sdesc = NULL;
@ -2408,18 +2476,112 @@ void t4_sge_stop(struct adapter *adap)
* Performs SGE initialization needed every time after a chip reset.
* We do not initialize any of the queues here, instead the driver
* top-level must request them individually.
*
* Called in two different modes:
*
* 1. Perform actual hardware initialization and record hard-coded
* parameters which were used. This gets used when we're the
* Master PF and the Firmware Configuration File support didn't
* work for some reason.
*
* 2. We're not the Master PF or initialization was performed with
* a Firmware Configuration File. In this case we need to grab
* any of the SGE operating parameters that we need to have in
* order to do our job and make sure we can live with them ...
*/
void t4_sge_init(struct adapter *adap)
{
unsigned int i, v;
struct sge *s = &adap->sge;
unsigned int fl_align_log = ilog2(FL_ALIGN);
t4_set_reg_field(adap, SGE_CONTROL, PKTSHIFT_MASK |
INGPADBOUNDARY_MASK | EGRSTATUSPAGESIZE,
INGPADBOUNDARY(fl_align_log - 5) | PKTSHIFT(2) |
RXPKTCPLMODE |
(STAT_LEN == 128 ? EGRSTATUSPAGESIZE : 0));
static int t4_sge_init_soft(struct adapter *adap)
{
struct sge *s = &adap->sge;
u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu;
u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
u32 ingress_rx_threshold;
/*
* Verify that CPL messages are going to the Ingress Queue for
* process_responses() and that only packet data is going to the
* Free Lists.
*/
if ((t4_read_reg(adap, SGE_CONTROL) & RXPKTCPLMODE_MASK) !=
RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) {
dev_err(adap->pdev_dev, "bad SGE CPL MODE\n");
return -EINVAL;
}
/*
* Validate the Host Buffer Register Array indices that we want to
* use ...
*
* XXX Note that we should really read through the Host Buffer Size
* XXX register array and find the indices of the Buffer Sizes which
* XXX meet our needs!
*/
#define READ_FL_BUF(x) \
t4_read_reg(adap, SGE_FL_BUFFER_SIZE0+(x)*sizeof(u32))
fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF);
fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF);
fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
#undef READ_FL_BUF
if (fl_small_pg != PAGE_SIZE ||
(fl_large_pg != 0 && (fl_large_pg <= fl_small_pg ||
(fl_large_pg & (fl_large_pg-1)) != 0))) {
dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n",
fl_small_pg, fl_large_pg);
return -EINVAL;
}
if (fl_large_pg)
s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT;
if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap) ||
fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) {
dev_err(adap->pdev_dev, "bad SGE FL MTU sizes [%d, %d]\n",
fl_small_mtu, fl_large_mtu);
return -EINVAL;
}
/*
* Retrieve our RX interrupt holdoff timer values and counter
* threshold values from the SGE parameters.
*/
timer_value_0_and_1 = t4_read_reg(adap, SGE_TIMER_VALUE_0_AND_1);
timer_value_2_and_3 = t4_read_reg(adap, SGE_TIMER_VALUE_2_AND_3);
timer_value_4_and_5 = t4_read_reg(adap, SGE_TIMER_VALUE_4_AND_5);
s->timer_val[0] = core_ticks_to_us(adap,
TIMERVALUE0_GET(timer_value_0_and_1));
s->timer_val[1] = core_ticks_to_us(adap,
TIMERVALUE1_GET(timer_value_0_and_1));
s->timer_val[2] = core_ticks_to_us(adap,
TIMERVALUE2_GET(timer_value_2_and_3));
s->timer_val[3] = core_ticks_to_us(adap,
TIMERVALUE3_GET(timer_value_2_and_3));
s->timer_val[4] = core_ticks_to_us(adap,
TIMERVALUE4_GET(timer_value_4_and_5));
s->timer_val[5] = core_ticks_to_us(adap,
TIMERVALUE5_GET(timer_value_4_and_5));
ingress_rx_threshold = t4_read_reg(adap, SGE_INGRESS_RX_THRESHOLD);
s->counter_val[0] = THRESHOLD_0_GET(ingress_rx_threshold);
s->counter_val[1] = THRESHOLD_1_GET(ingress_rx_threshold);
s->counter_val[2] = THRESHOLD_2_GET(ingress_rx_threshold);
s->counter_val[3] = THRESHOLD_3_GET(ingress_rx_threshold);
return 0;
}
static int t4_sge_init_hard(struct adapter *adap)
{
struct sge *s = &adap->sge;
/*
* Set up our basic SGE mode to deliver CPL messages to our Ingress
* Queue and Packet Date to the Free List.
*/
t4_set_reg_field(adap, SGE_CONTROL, RXPKTCPLMODE_MASK,
RXPKTCPLMODE_MASK);
/*
* Set up to drop DOORBELL writes when the DOORBELL FIFO overflows
@ -2433,13 +2595,24 @@ void t4_sge_init(struct adapter *adap)
t4_set_reg_field(adap, A_SGE_DOORBELL_CONTROL, F_ENABLE_DROP,
F_ENABLE_DROP);
for (i = v = 0; i < 32; i += 4)
v |= (PAGE_SHIFT - 10) << i;
t4_write_reg(adap, SGE_HOST_PAGE_SIZE, v);
t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, PAGE_SIZE);
#if FL_PG_ORDER > 0
t4_write_reg(adap, SGE_FL_BUFFER_SIZE1, PAGE_SIZE << FL_PG_ORDER);
#endif
/*
* SGE_FL_BUFFER_SIZE0 (RX_SMALL_PG_BUF) is set up by
* t4_fixup_host_params().
*/
s->fl_pg_order = FL_PG_ORDER;
if (s->fl_pg_order)
t4_write_reg(adap,
SGE_FL_BUFFER_SIZE0+RX_LARGE_PG_BUF*sizeof(u32),
PAGE_SIZE << FL_PG_ORDER);
t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_SMALL_MTU_BUF*sizeof(u32),
FL_MTU_SMALL_BUFSIZE(adap));
t4_write_reg(adap, SGE_FL_BUFFER_SIZE0+RX_LARGE_MTU_BUF*sizeof(u32),
FL_MTU_LARGE_BUFSIZE(adap));
/*
* Note that the SGE Ingress Packet Count Interrupt Threshold and
* Timer Holdoff values must be supplied by our caller.
*/
t4_write_reg(adap, SGE_INGRESS_RX_THRESHOLD,
THRESHOLD_0(s->counter_val[0]) |
THRESHOLD_1(s->counter_val[1]) |
@ -2449,14 +2622,54 @@ void t4_sge_init(struct adapter *adap)
TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[0])) |
TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[1])));
t4_write_reg(adap, SGE_TIMER_VALUE_2_AND_3,
TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[2])) |
TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[3])));
TIMERVALUE2(us_to_core_ticks(adap, s->timer_val[2])) |
TIMERVALUE3(us_to_core_ticks(adap, s->timer_val[3])));
t4_write_reg(adap, SGE_TIMER_VALUE_4_AND_5,
TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[4])) |
TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[5])));
TIMERVALUE4(us_to_core_ticks(adap, s->timer_val[4])) |
TIMERVALUE5(us_to_core_ticks(adap, s->timer_val[5])));
return 0;
}
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
u32 sge_control;
int ret;
/*
* Ingress Padding Boundary and Egress Status Page Size are set up by
* t4_fixup_host_params().
*/
sge_control = t4_read_reg(adap, SGE_CONTROL);
s->pktshift = PKTSHIFT_GET(sge_control);
s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64;
s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) +
X_INGPADBOUNDARY_SHIFT);
if (adap->flags & USING_SOFT_PARAMS)
ret = t4_sge_init_soft(adap);
else
ret = t4_sge_init_hard(adap);
if (ret < 0)
return ret;
/*
* A FL with <= fl_starve_thres buffers is starving and a periodic
* timer will attempt to refill it. This needs to be larger than the
* SGE's Egress Congestion Threshold. If it isn't, then we can get
* stuck waiting for new packets while the SGE is waiting for us to
* give it more Free List entries. (Note that the SGE's Egress
* Congestion Threshold is in units of 2 Free List pointers.)
*/
s->fl_starve_thres
= EGRTHRESHOLD_GET(t4_read_reg(adap, SGE_CONM_CTRL))*2 + 1;
setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
s->starve_thres = core_ticks_per_usec(adap) * 1000000; /* 1 s */
s->idma_state[0] = s->idma_state[1] = 0;
spin_lock_init(&s->intrq_lock);
return 0;
}

35
drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
View file

@ -86,10 +86,17 @@
#define CIDXINC_SHIFT 0
#define CIDXINC(x) ((x) << CIDXINC_SHIFT)
#define X_RXPKTCPLMODE_SPLIT 1
#define X_INGPADBOUNDARY_SHIFT 5
#define SGE_CONTROL 0x1008
#define DCASYSTYPE 0x00080000U
#define RXPKTCPLMODE 0x00040000U
#define EGRSTATUSPAGESIZE 0x00020000U
#define RXPKTCPLMODE_MASK 0x00040000U
#define RXPKTCPLMODE_SHIFT 18
#define RXPKTCPLMODE(x) ((x) << RXPKTCPLMODE_SHIFT)
#define EGRSTATUSPAGESIZE_MASK 0x00020000U
#define EGRSTATUSPAGESIZE_SHIFT 17
#define EGRSTATUSPAGESIZE(x) ((x) << EGRSTATUSPAGESIZE_SHIFT)
#define PKTSHIFT_MASK 0x00001c00U
#define PKTSHIFT_SHIFT 10
#define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT)
@ -173,6 +180,12 @@
#define THRESHOLD_3(x) ((x) << THRESHOLD_3_SHIFT)
#define THRESHOLD_3_GET(x) (((x) & THRESHOLD_3_MASK) >> THRESHOLD_3_SHIFT)
#define SGE_CONM_CTRL 0x1094
#define EGRTHRESHOLD_MASK 0x00003f00U
#define EGRTHRESHOLDshift 8
#define EGRTHRESHOLD(x) ((x) << EGRTHRESHOLDshift)
#define EGRTHRESHOLD_GET(x) (((x) & EGRTHRESHOLD_MASK) >> EGRTHRESHOLDshift)
#define SGE_TIMER_VALUE_0_AND_1 0x10b8
#define TIMERVALUE0_MASK 0xffff0000U
#define TIMERVALUE0_SHIFT 16
@ -184,7 +197,25 @@
#define TIMERVALUE1_GET(x) (((x) & TIMERVALUE1_MASK) >> TIMERVALUE1_SHIFT)
#define SGE_TIMER_VALUE_2_AND_3 0x10bc
#define TIMERVALUE2_MASK 0xffff0000U
#define TIMERVALUE2_SHIFT 16
#define TIMERVALUE2(x) ((x) << TIMERVALUE2_SHIFT)
#define TIMERVALUE2_GET(x) (((x) & TIMERVALUE2_MASK) >> TIMERVALUE2_SHIFT)
#define TIMERVALUE3_MASK 0x0000ffffU
#define TIMERVALUE3_SHIFT 0
#define TIMERVALUE3(x) ((x) << TIMERVALUE3_SHIFT)
#define TIMERVALUE3_GET(x) (((x) & TIMERVALUE3_MASK) >> TIMERVALUE3_SHIFT)
#define SGE_TIMER_VALUE_4_AND_5 0x10c0
#define TIMERVALUE4_MASK 0xffff0000U
#define TIMERVALUE4_SHIFT 16
#define TIMERVALUE4(x) ((x) << TIMERVALUE4_SHIFT)
#define TIMERVALUE4_GET(x) (((x) & TIMERVALUE4_MASK) >> TIMERVALUE4_SHIFT)
#define TIMERVALUE5_MASK 0x0000ffffU
#define TIMERVALUE5_SHIFT 0
#define TIMERVALUE5(x) ((x) << TIMERVALUE5_SHIFT)
#define TIMERVALUE5_GET(x) (((x) & TIMERVALUE5_MASK) >> TIMERVALUE5_SHIFT)
#define SGE_DEBUG_INDEX 0x10cc
#define SGE_DEBUG_DATA_HIGH 0x10d0
#define SGE_DEBUG_DATA_LOW 0x10d4

41
drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
View file

@ -401,6 +401,14 @@ enum fw_caps_config_fcoe {
FW_CAPS_CONFIG_FCOE_TARGET = 0x00000002,
};
enum fw_memtype_cf {
FW_MEMTYPE_CF_EDC0 = 0x0,
FW_MEMTYPE_CF_EDC1 = 0x1,
FW_MEMTYPE_CF_EXTMEM = 0x2,
FW_MEMTYPE_CF_FLASH = 0x4,
FW_MEMTYPE_CF_INTERNAL = 0x5,
};
struct fw_caps_config_cmd {
__be32 op_to_write;
__be32 retval_len16;
@ -416,10 +424,15 @@ struct fw_caps_config_cmd {
__be16 r4;
__be16 iscsicaps;
__be16 fcoecaps;
__be32 r5;
__be64 r6;
__be32 cfcsum;
__be32 finiver;
__be32 finicsum;
};
#define FW_CAPS_CONFIG_CMD_CFVALID (1U << 27)
#define FW_CAPS_CONFIG_CMD_MEMTYPE_CF(x) ((x) << 24)
#define FW_CAPS_CONFIG_CMD_MEMADDR64K_CF(x) ((x) << 16)
/*
* params command mnemonics
*/
@ -451,6 +464,7 @@ enum fw_params_param_dev {
FW_PARAMS_PARAM_DEV_INTVER_FCOE = 0x0A,
FW_PARAMS_PARAM_DEV_FWREV = 0x0B,
FW_PARAMS_PARAM_DEV_TPREV = 0x0C,
FW_PARAMS_PARAM_DEV_CF = 0x0D,
};
/*
@ -492,6 +506,8 @@ enum fw_params_param_pfvf {
FW_PARAMS_PARAM_PFVF_IQFLINT_END = 0x2A,
FW_PARAMS_PARAM_PFVF_EQ_START = 0x2B,
FW_PARAMS_PARAM_PFVF_EQ_END = 0x2C,
FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_START = 0x2D,
FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_END = 0x2E
};
/*
@ -507,8 +523,16 @@ enum fw_params_param_dmaq {
#define FW_PARAMS_MNEM(x) ((x) << 24)
#define FW_PARAMS_PARAM_X(x) ((x) << 16)
#define FW_PARAMS_PARAM_Y(x) ((x) << 8)
#define FW_PARAMS_PARAM_Z(x) ((x) << 0)
#define FW_PARAMS_PARAM_Y_SHIFT 8
#define FW_PARAMS_PARAM_Y_MASK 0xffU
#define FW_PARAMS_PARAM_Y(x) ((x) << FW_PARAMS_PARAM_Y_SHIFT)
#define FW_PARAMS_PARAM_Y_GET(x) (((x) >> FW_PARAMS_PARAM_Y_SHIFT) &\
FW_PARAMS_PARAM_Y_MASK)
#define FW_PARAMS_PARAM_Z_SHIFT 0
#define FW_PARAMS_PARAM_Z_MASK 0xffu
#define FW_PARAMS_PARAM_Z(x) ((x) << FW_PARAMS_PARAM_Z_SHIFT)
#define FW_PARAMS_PARAM_Z_GET(x) (((x) >> FW_PARAMS_PARAM_Z_SHIFT) &\
FW_PARAMS_PARAM_Z_MASK)
#define FW_PARAMS_PARAM_XYZ(x) ((x) << 0)
#define FW_PARAMS_PARAM_YZ(x) ((x) << 0)
@ -1599,6 +1623,15 @@ struct fw_debug_cmd {
} u;
};
#define FW_PCIE_FW_ERR (1U << 31)
#define FW_PCIE_FW_INIT (1U << 30)
#define FW_PCIE_FW_MASTER_VLD (1U << 15)
#define FW_PCIE_FW_MASTER_MASK 0x7
#define FW_PCIE_FW_MASTER_SHIFT 12
#define FW_PCIE_FW_MASTER(x) ((x) << FW_PCIE_FW_MASTER_SHIFT)
#define FW_PCIE_FW_MASTER_GET(x) (((x) >> FW_PCIE_FW_MASTER_SHIFT) & \
FW_PCIE_FW_MASTER_MASK)
struct fw_hdr {
u8 ver;
u8 reserved1;

5
drivers/net/ethernet/chelsio/cxgb4vf/sge.c
View file

@ -2421,7 +2421,7 @@ int t4vf_sge_init(struct adapter *adapter)
fl0, fl1);
return -EINVAL;
}
if ((sge_params->sge_control & RXPKTCPLMODE) == 0) {
if ((sge_params->sge_control & RXPKTCPLMODE_MASK) == 0) {
dev_err(adapter->pdev_dev, "bad SGE CPL MODE\n");
return -EINVAL;
}
@ -2431,7 +2431,8 @@ int t4vf_sge_init(struct adapter *adapter)
*/
if (fl1)
FL_PG_ORDER = ilog2(fl1) - PAGE_SHIFT;
STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE) ? 128 : 64);
STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK)
? 128 : 64);
PKTSHIFT = PKTSHIFT_GET(sge_params->sge_control);
FL_ALIGN = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
SGE_INGPADBOUNDARY_SHIFT);