[PATCH] CRIS update: new subarchitecture v32

New CRIS sub architecture named v32.

From: Dave Jones <davej@redhat.com>

	Fix swapped kmalloc args

Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/cris/arch-v32/Kconfig

@@ -0,0 +1,296 @@
+config ETRAX_DRAM_VIRTUAL_BASE
+	hex
+	depends on ETRAX_ARCH_V32
+	default "c0000000"
+
+config ETRAX_LED1G
+	string "First green LED bit"
+	depends on ETRAX_ARCH_V32
+	default "PA3"
+	help
+	  Bit to use for the first green LED (network LED).
+	  Most Axis products use bit A3 here.
+
+config ETRAX_LED1R
+	string "First red LED bit"
+	depends on ETRAX_ARCH_V32
+	default "PA4"
+	help
+	  Bit to use for the first red LED (network LED).
+	  Most Axis products use bit A4 here.
+
+config ETRAX_LED2G
+	string "Second green LED bit"
+	depends on ETRAX_ARCH_V32
+	default "PA5"
+	help
+	  Bit to use for the first green LED (status LED).
+	  Most Axis products use bit A5 here.
+
+config ETRAX_LED2R
+	string "Second red LED bit"
+	depends on ETRAX_ARCH_V32
+	default "PA6"
+	help
+	  Bit to use for the first red LED (network LED).
+	  Most Axis products use bit A6 here.
+
+config ETRAX_LED3G
+	string "Third green LED bit"
+	depends on ETRAX_ARCH_V32
+	default "PA7"
+	help
+	  Bit to use for the first green LED (drive/power LED).
+	  Most Axis products use bit A7 here.
+
+config ETRAX_LED3R
+	string "Third red LED bit"
+	depends on ETRAX_ARCH_V32
+	default "PA7"
+	help
+	  Bit to use for the first red LED (drive/power LED).
+	  Most Axis products use bit A7 here.
+
+choice
+	prompt "Product debug-port"
+	depends on ETRAX_ARCH_V32
+	default ETRAX_DEBUG_PORT0
+
+config ETRAX_DEBUG_PORT0
+	bool "Serial-0"
+	help
+	  Choose a serial port for the ETRAX debug console.  Default to
+	  port 0.
+
+config ETRAX_DEBUG_PORT1
+	bool "Serial-1"
+	help
+	  Use serial port 1 for the console.
+
+config ETRAX_DEBUG_PORT2
+	bool "Serial-2"
+	help
+	  Use serial port 2 for the console.
+
+config ETRAX_DEBUG_PORT3
+	bool "Serial-3"
+	help
+	  Use serial port 3 for the console.
+
+config ETRAX_DEBUG_PORT_NULL
+	bool "disabled"
+	help
+	  Disable serial-port debugging.
+
+endchoice
+
+choice
+	prompt "Kernel GDB port"
+	depends on ETRAX_KGDB
+	default ETRAX_KGDB_PORT0
+	help
+	  Choose a serial port for kernel debugging.  NOTE: This port should
+	  not be enabled under Drivers for built-in interfaces (as it has its
+	  own initialization code) and should not be the same as the debug port.
+
+config ETRAX_KGDB_PORT0
+	bool "Serial-0"
+	help
+	  Use serial port 0 for kernel debugging.
+
+config ETRAX_KGDB_PORT1
+	bool "Serial-1"
+	help
+	  Use serial port 1 for kernel debugging.
+
+config ETRAX_KGDB_PORT2
+	bool "Serial-2"
+	help
+	  Use serial port 2 for kernel debugging.
+
+config ETRAX_KGDB_PORT3
+	bool "Serial-3"
+	help
+	  Use serial port 3 for kernel debugging.
+
+endchoice
+
+config ETRAX_MEM_GRP1_CONFIG
+	hex "MEM_GRP1_CONFIG"
+	depends on ETRAX_ARCH_V32
+	default "4044a"
+	help
+	  Waitstates for flash. The default value is suitable for the
+	  standard flashes used in axis products (120 ns).
+
+config ETRAX_MEM_GRP2_CONFIG
+	hex "MEM_GRP2_CONFIG"
+	depends on ETRAX_ARCH_V32
+	default "0"
+	help
+	  Waitstates for SRAM. 0 is a good choice for most Axis products.
+
+config ETRAX_MEM_GRP3_CONFIG
+	hex "MEM_GRP3_CONFIG"
+	depends on ETRAX_ARCH_V32
+	default "0"
+	help
+	  Waitstates for CSP0-3. 0 is a good choice for most Axis products.
+	  It may need to be changed if external devices such as extra
+	  register-mapped LEDs are used.
+
+config ETRAX_MEM_GRP4_CONFIG
+	hex "MEM_GRP4_CONFIG"
+	depends on ETRAX_ARCH_V32
+	default "0"
+	help
+	  Waitstates for CSP4-6. 0 is a good choice for most Axis products.
+
+config ETRAX_SDRAM_GRP0_CONFIG
+	hex "SDRAM_GRP0_CONFIG"
+	depends on ETRAX_ARCH_V32
+	default "336"
+	help
+	  SDRAM configuration for group 0. The value depends on the
+	  hardware configuration. The default value is suitable
+	  for 32 MB organized as two 16 bits chips (e.g. Axis
+	  part number 18550) connected as one 32 bit device (i.e. in
+	  the same group).
+
+config ETRAX_SDRAM_GRP1_CONFIG
+	hex "SDRAM_GRP1_CONFIG"
+	depends on ETRAX_ARCH_V32
+	default "0"
+	help
+	  SDRAM configuration for group 1. The defult value is 0
+	  because group 1 is not used in the default configuration,
+	  described in the help for SDRAM_GRP0_CONFIG.
+
+config ETRAX_SDRAM_TIMING
+	hex "SDRAM_TIMING"
+	depends on ETRAX_ARCH_V32
+	default "104a"
+	help
+	  SDRAM timing parameters. The default value is ok for
+	  most hardwares but large SDRAMs may require a faster
+	  refresh (a.k.a 8K refresh). The default value implies
+	  100MHz clock and SDR mode.
+
+config ETRAX_SDRAM_COMMAND
+	hex "SDRAM_COMMAND"
+	depends on ETRAX_ARCH_V32
+	default "0"
+	help
+	  SDRAM command. Should be 0 unless you really know what
+	  you are doing (may be != 0 for unusual address line
+	  mappings such as in a MCM)..
+
+config ETRAX_DEF_GIO_PA_OE
+	hex "GIO_PA_OE"
+	depends on ETRAX_ARCH_V32
+	default "1c"
+	help
+	  Configures the direction of general port A bits.  1 is out, 0 is in.
+	  This is often totally different depending on the product used.
+	  There are some guidelines though - if you know that only LED's are
+	  connected to port PA, then they are usually connected to bits 2-4
+	  and you can therefore use 1c.  On other boards which don't have the
+	  LED's at the general ports, these bits are used for all kinds of
+	  stuff.  If you don't know what to use, it is always safe to put all
+	  as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_GIO_PA_OUT
+	hex "GIO_PA_OUT"
+	depends on ETRAX_ARCH_V32
+	default "00"
+	help
+	  Configures the initial data for the general port A bits.  Most
+	  products should use 00 here.
+
+config ETRAX_DEF_GIO_PB_OE
+	hex "GIO_PB_OE"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the direction of general port B bits.  1 is out, 0 is in.
+	  This is often totally different depending on the product used.
+	  There are some guidelines though - if you know that only LED's are
+	  connected to port PA, then they are usually connected to bits 2-4
+	  and you can therefore use 1c.  On other boards which don't have the
+	  LED's at the general ports, these bits are used for all kinds of
+	  stuff.  If you don't know what to use, it is always safe to put all
+	  as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_GIO_PB_OUT
+	hex "GIO_PB_OUT"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the initial data for the general port B bits.  Most
+	  products should use 00000 here.
+
+config ETRAX_DEF_GIO_PC_OE
+	hex "GIO_PC_OE"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the direction of general port C bits.  1 is out, 0 is in.
+	  This is often totally different depending on the product used.
+	  There are some guidelines though - if you know that only LED's are
+	  connected to port PA, then they are usually connected to bits 2-4
+	  and you can therefore use 1c.  On other boards which don't have the
+	  LED's at the general ports, these bits are used for all kinds of
+	  stuff.  If you don't know what to use, it is always safe to put all
+	  as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_GIO_PC_OUT
+	hex "GIO_PC_OUT"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the initial data for the general port C bits.  Most
+	  products should use 00000 here.
+
+config ETRAX_DEF_GIO_PD_OE
+	hex "GIO_PD_OE"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the direction of general port D bits.  1 is out, 0 is in.
+	  This is often totally different depending on the product used.
+	  There are some guidelines though - if you know that only LED's are
+	  connected to port PA, then they are usually connected to bits 2-4
+	  and you can therefore use 1c.  On other boards which don't have the
+	  LED's at the general ports, these bits are used for all kinds of
+	  stuff.  If you don't know what to use, it is always safe to put all
+	  as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_GIO_PD_OUT
+	hex "GIO_PD_OUT"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the initial data for the general port D bits.  Most
+	  products should use 00000 here.
+
+config ETRAX_DEF_GIO_PE_OE
+	hex "GIO_PE_OE"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the direction of general port E bits.  1 is out, 0 is in.
+	  This is often totally different depending on the product used.
+	  There are some guidelines though - if you know that only LED's are
+	  connected to port PA, then they are usually connected to bits 2-4
+	  and you can therefore use 1c.  On other boards which don't have the
+	  LED's at the general ports, these bits are used for all kinds of
+	  stuff.  If you don't know what to use, it is always safe to put all
+	  as inputs, although floating inputs isn't good.
+
+config ETRAX_DEF_GIO_PE_OUT
+	hex "GIO_PE_OUT"
+	depends on ETRAX_ARCH_V32
+	default "00000"
+	help
+	  Configures the initial data for the general port E bits.  Most
+	  products should use 00000 here.

arch/cris/arch-v32/boot/Makefile

@@ -0,0 +1,14 @@
+#
+# arch/cris/arch-v32/boot/Makefile
+#
+target = $(target_boot_dir)
+src    = $(src_boot_dir)
+
+zImage: compressed/vmlinuz
+
+compressed/vmlinuz: $(objtree)/vmlinux
+	@$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz
+
+clean:
+	rm -f zImage tools/build compressed/vmlinux.out
+	@$(MAKE) -f $(src)/compressed/Makefile clean

arch/cris/arch-v32/boot/compressed/Makefile

@@ -0,0 +1,41 @@
+#
+# lx25/arch/cris/arch-v32/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux files and romfs
+#
+
+target = $(target_compressed_dir)
+src    = $(src_compressed_dir)
+
+CC = gcc-cris -mlinux -march=v32 -I $(TOPDIR)/include
+CFLAGS = -O2
+LD = gcc-cris -mlinux -march=v32 -nostdlib
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+OBJECTS = $(target)/head.o $(target)/misc.o
+
+# files to compress
+SYSTEM = $(objtree)/vmlinux.bin
+
+all: vmlinuz
+
+$(target)/decompress.bin: $(OBJECTS)
+	$(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
+	$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
+
+$(objtree)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
+	cat $(target)/decompress.bin piggy.img > $(objtree)/vmlinuz
+	rm -f piggy.img
+	cp $(objtree)/vmlinuz $(src)
+
+$(target)/head.o: $(src)/head.S
+	$(CC) -D__ASSEMBLY__ -c $< -o $@
+
+# gzip the kernel image
+
+piggy.img: $(SYSTEM)
+	cat $(SYSTEM) | gzip -f -9 > piggy.img
+
+clean:
+	rm -f piggy.img $(objtree)/vmlinuz vmlinuz.o decompress.o decompress.bin $(OBJECTS)
+

arch/cris/arch-v32/boot/compressed/README

@@ -0,0 +1,25 @@
+Creation of the self-extracting compressed kernel image (vmlinuz)
+-----------------------------------------------------------------
+$Id: README,v 1.1 2003/08/21 09:37:03 johana Exp $
+
+This can be slightly confusing because it's a process with many steps.
+
+The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
+by that makefile into text and data binary files, vmlinux.text and
+vmlinux.data.
+
+Those files together with a ROM filesystem can be catted together and
+burned into a flash or executed directly at the DRAM origin.
+
+They can also be catted together and compressed with gzip, which is what
+happens in this makefile. Together they make up piggy.img.
+
+The decompressor is built into the file decompress.o. It is turned into
+the binary file decompress.bin, which is catted together with piggy.img
+into the file vmlinuz. It can be executed in an arbitrary place in flash.
+
+Be careful - it assumes some things about free locations in DRAM. It
+assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
+so it puts its code at 0x40700000, and initial stack at 0x40800000.
+
+-Bjorn

arch/cris/arch-v32/boot/compressed/decompress.ld

@@ -0,0 +1,30 @@
+/*#OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_ARCH (crisv32)
+
+MEMORY
+	{
+	dram : ORIGIN = 0x40700000,
+	       LENGTH = 0x00100000
+	}
+
+SECTIONS
+{
+	.text :
+	{
+		_stext = . ;
+		*(.text)
+		*(.rodata)
+		*(.rodata.*)
+		_etext = . ;
+	} > dram
+	.data :
+	{
+		*(.data)
+		_edata = . ;
+	} > dram
+	.bss :
+	{
+		*(.bss)
+		_end = ALIGN( 0x10 ) ;
+	} > dram
+}

arch/cris/arch-v32/boot/compressed/head.S

@@ -0,0 +1,193 @@
+/*
+ *  Code that sets up the DRAM registers, calls the
+ *  decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ *  Copyright (C) 1999 - 2003, Axis Communications AB
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
+#include <asm/arch/hwregs/asm/config_defs_asm.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+	;; Exported symbols
+
+	.globl	input_data
+
+	.text
+start:
+	di
+
+	;; Start clocks for used blocks.
+	move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
+	move.d [$r1], $r0
+	or.d   REG_STATE(config, rw_clk_ctrl, cpu, yes) | \
+	       REG_STATE(config, rw_clk_ctrl, bif, yes) | \
+	       REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
+	move.d $r0, [$r1]
+
+	;; If booting from NAND flash we first have to copy some
+	;; data from NAND flash to internal RAM to get the code
+	;; that initializes the SDRAM. Lets copy 20 KB. This
+	;; code executes at 0x38010000 if booting from NAND and
+	;; we are guaranted that at least 0x200 bytes are good so
+	;; lets start from there. The first 8192 bytes in the nand
+	;; flash is spliced with zeroes and is thus 16384 bytes.
+	move.d 0x38010200, $r10
+	move.d 0x14200, $r11	; Start offset in NAND flash 0x10200 + 16384
+	move.d 0x5000, $r12	; Length of copy
+
+	;; Before this code the tools add a partitiontable so the PC
+	;; has an offset from the linked address.
+offset1:
+	lapcq  ., $r13		; get PC
+	add.d	first_copy_complete-offset1, $r13
+
+#include "../../lib/nand_init.S"
+
+first_copy_complete:
+	;; Initialze the DRAM registers.
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
+	beq	dram_init_finished
+	nop
+
+#include "../../lib/dram_init.S"
+
+dram_init_finished:
+	lapcq  ., $r13		; get PC
+	add.d	second_copy_complete-dram_init_finished, $r13
+
+	move.d REG_ADDR(config, regi_config, r_bootsel), $r0
+	move.d [$r0], $r0
+	and.d  REG_MASK(config, r_bootsel, boot_mode), $r0
+	cmp.d  REG_STATE(config, r_bootsel, boot_mode, nand), $r0
+	bne second_copy_complete ; No NAND boot
+	nop
+
+	;; Copy 2MB from NAND flash to SDRAM (at 2-4MB into the SDRAM)
+	move.d 0x40204000, $r10
+	move.d 0x8000, $r11
+	move.d 0x200000, $r12
+	ba copy_nand_to_ram
+	nop
+second_copy_complete:
+
+	;; Initiate the PA port.
+	move.d	CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
+	move.d	$r0, [$r1]
+
+	move.d	CONFIG_ETRAX_DEF_GIO_PA_OE, $r0
+	move.d	REG_ADDR(gio, regi_gio, rw_pa_oe), $r1
+	move.d	$r0, [$r1]
+
+	;; Setup the stack to a suitably high address.
+	;; We assume 8 MB is the minimum DRAM and put
+	;; the SP at the top for now.
+
+	move.d	0x40800000, $sp
+
+	;; Figure out where the compressed piggyback image is
+	;; in the flash (since we wont try to copy it to DRAM
+	;; before unpacking). It is at _edata, but in flash.
+	;; Use (_edata - herami) as offset to the current PC.
+
+	move.d REG_ADDR(config, regi_config, r_bootsel), $r0
+	move.d [$r0], $r0
+	and.d  REG_MASK(config, r_bootsel, boot_mode), $r0
+	cmp.d  REG_STATE(config, r_bootsel, boot_mode, nand), $r0
+	beq hereami2
+	nop
+hereami:
+	lapcq	., $r5		; get PC
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	move.d	$r5, $r0	; save for later - flash address of 'herami'
+	add.d	_edata, $r5
+	sub.d	hereami, $r5	; r5 = flash address of '_edata'
+	move.d	hereami, $r1	; destination
+	ba 2f
+	nop
+hereami2:
+	lapcq	., $r5		; get PC
+	and.d	0x00ffffff, $r5	; strip any non-cache bit
+	move.d  $r5, $r6
+	or.d    0x40200000, $r6
+	move.d	$r6, $r0	; save for later - flash address of 'herami'
+	add.d	_edata, $r5
+	sub.d	hereami2, $r5	; r5 = flash address of '_edata'
+	add.d   0x40200000, $r5
+	move.d	hereami2, $r1	; destination
+2:
+	;; Copy text+data to DRAM
+
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	move.d	input_data, $r0 ; for the decompressor
+	move.d	$r5, [$r0]	; for the decompressor
+
+	;; Clear the decompressors BSS (between _edata and _end)
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
+	bcs	1b
+	nop
+
+	;;  Save command line magic and address.
+	move.d	_cmd_line_magic, $r12
+	move.d  $r10, [$r12]
+	move.d	_cmd_line_addr, $r12
+	move.d  $r11, [$r12]
+
+	;; Do the decompression and save compressed size in _inptr
+
+	jsr	decompress_kernel
+	nop
+
+	;; Restore command line magic and address.
+	move.d  _cmd_line_magic, $r10
+	move.d  [$r10], $r10
+	move.d  _cmd_line_addr, $r11
+	move.d  [$r11], $r11
+
+	;; Put start address of root partition in r9 so the kernel can use it
+	;; when mounting from flash
+	move.d  input_data, $r0
+	move.d	[$r0], $r9		; flash address of compressed kernel
+	move.d  inptr, $r0
+	add.d	[$r0], $r9		; size of compressed kernel
+	cmp.d   0x40200000, $r9
+	blo	enter_kernel
+	nop
+	sub.d   0x40200000, $r9
+	add.d   0x4000, $r9
+
+enter_kernel:
+	;; Enter the decompressed kernel
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
+	jump	0x40004000	; kernel is linked to this address
+	nop
+
+	.data
+
+input_data:
+	.dword	0		; used by the decompressor
+_cmd_line_magic:
+	.dword 0
+_cmd_line_addr:
+	.dword 0
+is_nand_boot:
+	.dword  0
+
+#include "../../lib/hw_settings.S"

arch/cris/arch-v32/boot/compressed/misc.c

@@ -0,0 +1,318 @@
+/*
+ * misc.c
+ *
+ * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * adoptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+
+/* where the piggybacked kernel image expects itself to live.
+ * it is the same address we use when we network load an uncompressed
+ * image into DRAM, and it is the address the kernel is linked to live
+ * at by vmlinux.lds.S
+ */
+
+#define KERNEL_LOAD_ADR 0x40004000
+
+#include <linux/config.h>
+
+#include <linux/types.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/ser_defs.h>
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+#define STATIC static
+
+void* memset(void* s, int c, size_t n);
+void* memcpy(void* __dest, __const void* __src,
+	     size_t __n);
+
+#define memzero(s, n)     memset ((s), 0, (n))
+
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000		/* Window size must be at least 32k, */
+				/* and a power of two */
+
+static uch *inbuf;	     /* input buffer */
+static uch window[WSIZE];    /* Sliding window buffer */
+
+unsigned inptr = 0;	/* index of next byte to be processed in inbuf
+			 * After decompression it will contain the
+			 * compressed size, and head.S will read it.
+			 */
+
+static unsigned outcnt = 0;  /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+#define RESERVED     0xC0 /* bit 6,7:   reserved */
+
+#define get_byte() inbuf[inptr++]
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+static int  fill_inbuf(void);
+static void flush_window(void);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+extern char *input_data;  /* lives in head.S */
+
+static long bytes_out = 0;
+static uch *output_data;
+static unsigned long output_ptr = 0;
+
+static void *malloc(int size);
+static void free(void *where);
+static void error(char *m);
+static void gzip_mark(void **);
+static void gzip_release(void **);
+
+static void puts(const char *);
+
+/* the "heap" is put directly after the BSS ends, at end */
+
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+
+#include "../../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+	void *p;
+
+	if (size <0) error("Malloc error");
+
+	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
+
+	p = (void *)free_mem_ptr;
+	free_mem_ptr += size;
+
+	return p;
+}
+
+static void free(void *where)
+{	/* Don't care */
+}
+
+static void gzip_mark(void **ptr)
+{
+	*ptr = (void *) free_mem_ptr;
+}
+
+static void gzip_release(void **ptr)
+{
+	free_mem_ptr = (long) *ptr;
+}
+
+/* decompressor info and error messages to serial console */
+
+static inline void
+serout(const char *s, reg_scope_instances regi_ser)
+{
+	reg_ser_rs_stat_din rs;
+	reg_ser_rw_dout dout = {.data = *s};
+
+	do {
+		rs = REG_RD(ser, regi_ser, rs_stat_din);
+	}
+	while (!rs.tr_rdy);/* Wait for tranceiver. */
+
+	REG_WR(ser, regi_ser, rw_dout, dout);
+}
+
+static void
+puts(const char *s)
+{
+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+	while (*s) {
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+		serout(s, regi_ser0);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+		serout(s, regi_ser1);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+		serout(s, regi_ser2);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+		serout(s, regi_ser3);
+#endif
+		*s++;
+	}
+/* CONFIG_ETRAX_DEBUG_PORT_NULL */
+#endif
+}
+
+void*
+memset(void* s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+}
+
+void*
+memcpy(void* __dest, __const void* __src,
+			    size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++) d[i] = s[i];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+
+static void
+flush_window()
+{
+    ulg c = crc;         /* temporary variable */
+    unsigned n;
+    uch *in, *out, ch;
+
+    in = window;
+    out = &output_data[output_ptr];
+    for (n = 0; n < outcnt; n++) {
+	    ch = *out++ = *in++;
+	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+    }
+    crc = c;
+    bytes_out += (ulg)outcnt;
+    output_ptr += (ulg)outcnt;
+    outcnt = 0;
+}
+
+static void
+error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted\n");
+
+	while(1);	/* Halt */
+}
+
+void
+setup_normal_output_buffer()
+{
+	output_data = (char *)KERNEL_LOAD_ADR;
+}
+
+static inline void
+serial_setup(reg_scope_instances regi_ser)
+{
+	reg_ser_rw_xoff xoff;
+	reg_ser_rw_tr_ctrl tr_ctrl;
+	reg_ser_rw_rec_ctrl rec_ctrl;
+	reg_ser_rw_tr_baud_div tr_baud;
+	reg_ser_rw_rec_baud_div rec_baud;
+
+	/* Turn off XOFF. */
+	xoff = REG_RD(ser, regi_ser, rw_xoff);
+
+	xoff.chr = 0;
+	xoff.automatic = regk_ser_no;
+
+	REG_WR(ser, regi_ser, rw_xoff, xoff);
+
+	/* Set baudrate and stopbits. */
+	tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+	rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+	tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
+	rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
+
+	tr_ctrl.stop_bits = 1;	/* 2 stop bits. */
+
+	/*
+	 * The baudrate setup is a bit fishy, but in the end the tranceiver is
+	 * set to 4800 and the receiver to 115200. The magic value is
+	 * 29.493 MHz.
+	 */
+	tr_ctrl.base_freq = regk_ser_f29_493;
+	rec_ctrl.base_freq = regk_ser_f29_493;
+	tr_baud.div = (29493000 / 8) / 4800;
+	rec_baud.div = (29493000 / 8) / 115200;
+
+	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+	REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
+	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
+}
+
+void
+decompress_kernel()
+{
+	char revision;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	serial_setup(regi_ser0);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	serial_setup(regi_ser1);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	serial_setup(regi_ser2);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	serial_setup(regi_ser3);
+#endif
+
+	setup_normal_output_buffer();
+
+	makecrc();
+
+	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
+	if (revision < 32)
+	{
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n");
+		while(1);
+	}
+
+	puts("Uncompressing Linux...\n");
+	gunzip();
+	puts("Done. Now booting the kernel.\n");
+}

arch/cris/arch-v32/boot/rescue/Makefile

@@ -0,0 +1,36 @@
+#
+# Makefile for rescue code
+#
+target = $(target_rescue_dir)
+src    = $(src_rescue_dir)
+
+CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+CFLAGS = -O2
+LD = gcc-cris -mlinux -march=v32 -nostdlib
+OBJCOPY = objcopy-cris
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+
+all: $(target)/rescue.bin
+
+rescue: rescue.bin
+	# do nothing
+
+$(target)/rescue.bin: $(target) $(target)/head.o
+	$(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
+	$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
+	cp -p $(target)/rescue.bin $(objtree)
+
+$(target):
+	mkdir -p $(target)
+
+$(target)/head.o: $(src)/head.S
+	$(CC) -D__ASSEMBLY__ -c $< -o $*.o
+
+clean:
+	rm -f $(target)/*.o $(target)/*.bin
+
+fastdep:
+
+modules:
+
+modules-install:

arch/cris/arch-v32/boot/rescue/head.S

@@ -0,0 +1,39 @@
+/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $
+ *
+ * This used to be the rescue code but now that is handled by the
+ * RedBoot based RFL instead. Nothing to see here, move along.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/reg_map_asm.h>
+#include <asm/arch/hwregs/config_defs_asm.h>
+
+	.text
+
+	;; Start clocks for used blocks.
+	move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
+	move.d [$r1], $r0
+	or.d   REG_STATE(config, rw_clk_ctrl, cpu, yes) | \
+	       REG_STATE(config, rw_clk_ctrl, bif, yes) | \
+	       REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
+	move.d $r0, [$r1]
+
+	;; Copy 68KB NAND flash to Internal RAM (if NAND boot)
+	move.d 0x38004000, $r10
+	move.d 0x8000, $r11
+	move.d 0x11000, $r12
+	move.d copy_complete, $r13
+	and.d  0x000fffff, $r13
+	or.d   0x38000000, $r13
+
+#include "../../lib/nand_init.S"
+
+	;; No NAND found
+	move.d	CONFIG_ETRAX_PTABLE_SECTOR, $r10
+	jump	$r10 ; Jump to decompresser
+	nop
+
+copy_complete:
+	move.d	0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10
+	jump	$r10 ; Jump to decompresser
+	nop

arch/cris/arch-v32/boot/rescue/rescue.ld

@@ -0,0 +1,20 @@
+MEMORY
+	{
+	flash : ORIGIN = 0x00000000,
+	        LENGTH = 0x00100000
+	}
+
+SECTIONS
+{
+	.text :
+	{
+		stext = . ;
+		*(.text)
+		etext = . ;
+	} > flash
+	.data :
+	{
+		*(.data)
+		edata = . ;
+	} > flash
+}

arch/cris/arch-v32/drivers/Kconfig

@@ -0,0 +1,625 @@
+config ETRAX_ETHERNET
+	bool "Ethernet support"
+	depends on ETRAX_ARCH_V32
+	select NET_ETHERNET
+	help
+	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet
+	  controller.
+
+config ETRAX_ETHERNET_HW_CSUM
+	bool "Hardware accelerated ethernet checksum and scatter/gather"
+	depends on ETRAX_ETHERNET
+	depends on ETRAX_STREAMCOPROC
+	default y
+	help
+	  Hardware acceleration of checksumming and scatter/gather
+
+config ETRAX_ETHERNET_IFACE0
+	depends on ETRAX_ETHERNET
+	bool "Enable network interface 0"
+
+config ETRAX_ETHERNET_IFACE1
+	depends on ETRAX_ETHERNET
+	bool "Enable network interface 1 (uses DMA6 and DMA7)"
+
+choice
+	prompt "Network LED behavior"
+	depends on ETRAX_ETHERNET
+	default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+
+config ETRAX_NETWORK_LED_ON_WHEN_LINK
+	bool "LED_on_when_link"
+	help
+	  Selecting LED_on_when_link will light the LED when there is a
+	  connection and will flash off when there is activity.
+
+	  Selecting LED_on_when_activity will light the LED only when
+	  there is activity.
+
+	  This setting will also affect the behaviour of other activity LEDs
+	  e.g. Bluetooth.
+
+config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+	bool "LED_on_when_activity"
+	help
+	  Selecting LED_on_when_link will light the LED when there is a
+	  connection and will flash off when there is activity.
+
+	  Selecting LED_on_when_activity will light the LED only when
+	  there is activity.
+
+	  This setting will also affect the behaviour of other activity LEDs
+	  e.g. Bluetooth.
+
+endchoice
+
+config ETRAXFS_SERIAL
+	bool "Serial-port support"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enables the ETRAX FS serial driver for ser0 (ttyS0)
+	  You probably want this enabled.
+
+config ETRAX_SERIAL_PORT0
+	bool "Serial port 0 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser0 (ttyS0)
+	  Normally you want this on. You can control what DMA channels to use
+	  if you do not need DMA to something else.
+	  ser0 can use dma4 or dma6 for output and dma5 or dma7 for input.
+
+choice
+	prompt "Ser0 DMA in channel "
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SERIAL_PORT0_NO_DMA_IN
+	help
+	  What DMA channel to use for ser0.
+
+
+config ETRAX_SERIAL_PORT0_NO_DMA_IN
+	bool "Ser0 uses no DMA for input"
+	help
+	  Do not use DMA for ser0 input.
+
+config ETRAX_SERIAL_PORT0_DMA7_IN
+	bool "Ser0 uses DMA7 for input"
+	depends on ETRAX_SERIAL_PORT0
+	help
+	  Enables the DMA7 input channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser0 DMA out channel"
+	depends on ETRAX_SERIAL_PORT0
+	default ETRAX_SERIAL_PORT0_NO_DMA_OUT
+
+config ETRAX_SERIAL_PORT0_NO_DMA_OUT
+	bool "Ser0 uses no DMA for output"
+	help
+	  Do not use DMA for ser0 output.
+
+config ETRAX_SERIAL_PORT0_DMA6_OUT
+	bool "Ser0 uses DMA6 for output"
+	depends on ETRAX_SERIAL_PORT0
+	help
+	  Enables the DMA6 output channel for ser0 (ttyS0).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER0_DTR_BIT
+	string "Ser 0 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SER0_RI_BIT
+	string "Ser 0 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SER0_DSR_BIT
+	string "Ser 0 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SER0_CD_BIT
+	string "Ser 0 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT0
+
+config ETRAX_SERIAL_PORT1
+	bool "Serial port 1 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser1 (ttyS1).
+
+choice
+	prompt "Ser1 DMA in channel "
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SERIAL_PORT1_NO_DMA_IN
+	help
+	  What DMA channel to use for ser1.
+
+
+config ETRAX_SERIAL_PORT1_NO_DMA_IN
+	bool "Ser1 uses no DMA for input"
+	help
+	  Do not use DMA for ser1 input.
+
+config ETRAX_SERIAL_PORT1_DMA5_IN
+	bool "Ser1 uses DMA5 for input"
+	depends on ETRAX_SERIAL_PORT1
+	help
+	  Enables the DMA5 input channel for ser1 (ttyS1).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want this on, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser1 DMA out channel "
+	depends on ETRAX_SERIAL_PORT1
+	default ETRAX_SERIAL_PORT1_NO_DMA_OUT
+	help
+	  What DMA channel to use for ser1.
+
+config ETRAX_SERIAL_PORT1_NO_DMA_OUT
+	bool "Ser1 uses no DMA for output"
+	help
+	  Do not use DMA for ser1 output.
+
+config ETRAX_SERIAL_PORT1_DMA4_OUT
+	bool "Ser1 uses DMA4 for output"
+	depends on ETRAX_SERIAL_PORT1
+	help
+	  Enables the DMA4 output channel for ser1 (ttyS1).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want this on, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER1_DTR_BIT
+	string "Ser 1 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SER1_RI_BIT
+	string "Ser 1 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SER1_DSR_BIT
+	string "Ser 1 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SER1_CD_BIT
+	string "Ser 1 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT1
+
+config ETRAX_SERIAL_PORT2
+	bool "Serial port 2 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser2 (ttyS2).
+
+choice
+	prompt "Ser2 DMA in channel "
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SERIAL_PORT2_NO_DMA_IN
+	help
+	  What DMA channel to use for ser2.
+
+
+config ETRAX_SERIAL_PORT2_NO_DMA_IN
+	bool "Ser2 uses no DMA for input"
+	help
+	  Do not use DMA for ser2 input.
+
+config ETRAX_SERIAL_PORT2_DMA3_IN
+	bool "Ser2 uses DMA3 for input"
+	depends on ETRAX_SERIAL_PORT2
+	help
+	  Enables the DMA3 input channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser2 DMA out channel"
+	depends on ETRAX_SERIAL_PORT2
+	default ETRAX_SERIAL_PORT2_NO_DMA_OUT
+
+config ETRAX_SERIAL_PORT2_NO_DMA_OUT
+	bool "Ser2 uses no DMA for output"
+	help
+	  Do not use DMA for ser2 output.
+
+config ETRAX_SERIAL_PORT2_DMA2_OUT
+	bool "Ser2 uses DMA2 for output"
+	depends on ETRAX_SERIAL_PORT2
+	help
+	  Enables the DMA2 output channel for ser2 (ttyS2).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER2_DTR_BIT
+	string "Ser 2 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SER2_RI_BIT
+	string "Ser 2 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SER2_DSR_BIT
+	string "Ser 2 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SER2_CD_BIT
+	string "Ser 2 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT2
+
+config ETRAX_SERIAL_PORT3
+	bool "Serial port 3 enabled"
+	depends on ETRAXFS_SERIAL
+	help
+	  Enables the ETRAX FS serial driver for ser3 (ttyS3).
+
+choice
+	prompt "Ser3 DMA in channel "
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SERIAL_PORT3_NO_DMA_IN
+	help
+	  What DMA channel to use for ser3.
+
+
+config ETRAX_SERIAL_PORT3_NO_DMA_IN
+	bool "Ser3 uses no DMA for input"
+	help
+	  Do not use DMA for ser3 input.
+
+config ETRAX_SERIAL_PORT3_DMA9_IN
+	bool "Ser3 uses DMA9 for input"
+	depends on ETRAX_SERIAL_PORT3
+	help
+	  Enables the DMA9 input channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when receiveing data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+choice
+	prompt "Ser3 DMA out channel"
+	depends on ETRAX_SERIAL_PORT3
+	default ETRAX_SERIAL_PORT3_NO_DMA_OUT
+
+config ETRAX_SERIAL_PORT3_NO_DMA_OUT
+	bool "Ser3 uses no DMA for output"
+	help
+	  Do not use DMA for ser3 output.
+
+config ETRAX_SERIAL_PORT3_DMA8_OUT
+	bool "Ser3 uses DMA8 for output"
+	depends on ETRAX_SERIAL_PORT3
+	help
+	  Enables the DMA8 output channel for ser3 (ttyS3).
+	  If you do not enable DMA, an interrupt for each character will be
+	  used when transmitting data.
+	  Normally you want to use DMA, unless you use the DMA channel for
+	  something else.
+
+endchoice
+
+config ETRAX_SER3_DTR_BIT
+	string "Ser 3 DTR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_SER3_RI_BIT
+	string "Ser 3 RI bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_SER3_DSR_BIT
+	string "Ser 3 DSR bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_SER3_CD_BIT
+	string "Ser 3 CD bit (empty = not used)"
+	depends on ETRAX_SERIAL_PORT3
+
+config ETRAX_RS485
+	bool "RS-485 support"
+	depends on ETRAX_SERIAL
+	help
+	  Enables support for RS-485 serial communication.  For a primer on
+	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+
+config ETRAX_RS485_DISABLE_RECEIVER
+	bool "Disable serial receiver"
+	depends on ETRAX_RS485
+	help
+	  It is necessary to disable the serial receiver to avoid serial
+	  loopback.  Not all products are able to do this in software only.
+	  Axis 2400/2401 must disable receiver.
+
+config ETRAX_AXISFLASHMAP
+	bool "Axis flash-map support"
+	depends on ETRAX_ARCH_V32
+	select MTD
+	select MTD_CFI
+	select MTD_CFI_AMDSTD
+	select MTD_OBSOLETE_CHIPS
+	select MTD_AMDSTD
+	select MTD_CHAR
+	select MTD_BLOCK
+	select MTD_PARTITIONS
+	select MTD_CONCAT
+	select MTD_COMPLEX_MAPPINGS
+	help
+	  This option enables MTD mapping of flash devices.  Needed to use
+	  flash memories.  If unsure, say Y.
+
+config ETRAX_SYNCHRONOUS_SERIAL
+	bool "Synchronous serial-port support"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enables the ETRAX FS synchronous serial driver.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT0
+         bool "Synchronous serial port 0 enabled"
+         depends on ETRAX_SYNCHRONOUS_SERIAL
+         help
+           Enabled synchronous serial port 0.
+
+config ETRAX_SYNCHRONOUS_SERIAL0_DMA
+         bool "Enable DMA on synchronous serial port 0."
+         depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
+         help
+           A synchronous serial port can run in manual or DMA mode.
+           Selecting this option will make it run in DMA mode.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT1
+         bool "Synchronous serial port 1 enabled"
+         depends on ETRAX_SYNCHRONOUS_SERIAL
+         help
+           Enabled synchronous serial port 1.
+
+config ETRAX_SYNCHRONOUS_SERIAL1_DMA
+         bool "Enable DMA on synchronous serial port 1."
+         depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
+         help
+           A synchronous serial port can run in manual or DMA mode.
+           Selecting this option will make it run in DMA mode.
+
+config ETRAX_PTABLE_SECTOR
+	int "Byte-offset of partition table sector"
+	depends on ETRAX_AXISFLASHMAP
+	default "65536"
+	help
+	  Byte-offset of the partition table in the first flash chip.
+	  The default value is 64kB and should not be changed unless
+	  you know exactly what you are doing. The only valid reason
+	  for changing this is when the flash block size is bigger
+	  than 64kB (e.g. when using two parallel 16 bit flashes).
+
+config ETRAX_NANDFLASH
+	bool "NAND flash support"
+	depends on ETRAX_ARCH_V32
+	select MTD_NAND
+	select MTD_NAND_IDS
+	help
+	  This option enables MTD mapping of NAND flash devices.  Needed to use
+	  NAND flash memories.  If unsure, say Y.
+
+config ETRAX_I2C
+	bool "I2C driver"
+	depends on ETRAX_ARCH_V32
+	help
+	  This option enabled the I2C driver used by e.g. the RTC driver.
+
+config ETRAX_I2C_DATA_PORT
+	string "I2C data pin"
+	depends on ETRAX_I2C
+	help
+	  The pin to use for I2C data.
+
+config ETRAX_I2C_CLK_PORT
+	string "I2C clock pin"
+	depends on ETRAX_I2C
+	help
+	  The pin to use for I2C clock.
+
+config ETRAX_RTC
+	bool "Real Time Clock support"
+	depends on ETRAX_ARCH_V32
+	help
+	  Enabled RTC support.
+
+choice
+	prompt "RTC chip"
+	depends on ETRAX_RTC
+	default ETRAX_PCF8563
+
+config ETRAX_PCF8563
+	bool "PCF8563"
+	help
+	  Philips PCF8563 RTC
+
+endchoice
+
+config ETRAX_GPIO
+	bool "GPIO support"
+	depends on ETRAX_ARCH_V32
+	---help---
+	  Enables the ETRAX general port device (major 120, minors 0-4).
+	  You can use this driver to access the general port bits. It supports
+	  these ioctl's:
+	  #include <linux/etraxgpio.h>
+	  fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob
+	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set);
+	  ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear);
+	  err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val);
+	  Remember that you need to setup the port directions appropriately in
+	  the General configuration.
+
+config ETRAX_PA_BUTTON_BITMASK
+	hex "PA-buttons bitmask"
+	depends on ETRAX_GPIO
+	default "0x02"
+	help
+	  This is a bitmask (8 bits) with information about what bits on PA
+	  that are used for buttons.
+	  Most products has a so called TEST button on PA1, if that is true
+	  use 0x02 here.
+	  Use 00 if there are no buttons on PA.
+	  If the bitmask is <> 00 a button driver will be included in the gpio
+	  driver. ETRAX general I/O support must be enabled.
+
+config ETRAX_PA_CHANGEABLE_DIR
+	hex "PA user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00"
+	help
+	  This is a bitmask (8 bits) with information of what bits in PA that a
+	  user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00 here, but it depends on your hardware.
+
+config ETRAX_PA_CHANGEABLE_BITS
+	hex "PA user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00"
+	help
+	  This is a bitmask (8 bits) with information of what bits in PA
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PB_CHANGEABLE_DIR
+	hex "PB user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PB
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PB_CHANGEABLE_BITS
+	hex "PB user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PB
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PC_CHANGEABLE_DIR
+	hex "PC user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PC
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PC_CHANGEABLE_BITS
+	hex "PC user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PC
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PD_CHANGEABLE_DIR
+	hex "PD user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PD
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PD_CHANGEABLE_BITS
+	hex "PD user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PD
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_PE_CHANGEABLE_DIR
+	hex "PE user changeable dir mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PE
+	  that a user can change direction on using ioctl's.
+	  Bit set = changeable.
+	  You probably want 0x00000 here, but it depends on your hardware.
+
+config ETRAX_PE_CHANGEABLE_BITS
+	hex "PE user changeable bits mask"
+	depends on ETRAX_GPIO
+	default "0x00000"
+	help
+	  This is a bitmask (18 bits) with information of what bits in PE
+	  that a user can change the value on using ioctl's.
+	  Bit set = changeable.
+
+config ETRAX_IDE
+	bool "ATA/IDE support"
+	depends on ETRAX_ARCH_V32
+	select IDE
+	select BLK_DEV_IDE
+	select BLK_DEV_IDEDISK
+	select BLK_DEV_IDECD
+	select BLK_DEV_IDEDMA
+	help
+	  Enables the ETRAX IDE driver.
+
+config ETRAX_CARDBUS
+        bool "Cardbus support"
+        depends on ETRAX_ARCH_V32
+        select PCCARD
+        select CARDBUS
+        select HOTPLUG
+        select PCCARD_NONSTATIC
+        help
+	 Enabled the ETRAX Carbus driver.
+
+config PCI
+       bool
+       depends on ETRAX_CARDBUS
+       default y
+
+config ETRAX_IOP_FW_LOAD
+	tristate "IO-processor hotplug firmware loading support"
+	depends on ETRAX_ARCH_V32
+	select FW_LOADER
+	help
+	  Enables IO-processor hotplug firmware loading support.
+
+config ETRAX_STREAMCOPROC
+	tristate "Stream co-processor driver enabled"
+	depends on ETRAX_ARCH_V32
+	help
+	  This option enables a driver for the stream co-processor
+	  for cryptographic operations.

arch/cris/arch-v32/drivers/Makefile

@@ -0,0 +1,13 @@
+#
+# Makefile for Etrax-specific drivers
+#
+
+obj-$(CONFIG_ETRAX_STREAMCOPROC)        += cryptocop.o
+obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
+obj-$(CONFIG_ETRAX_NANDFLASH)           += nandflash.o
+obj-$(CONFIG_ETRAX_GPIO) 	        += gpio.o
+obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
+obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
+obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
+obj-$(CONFIG_PCI)			+= pci/

arch/cris/arch-v32/drivers/axisflashmap.c

@@ -0,0 +1,455 @@
+/*
+ * Physical mapping layer for MTD using the Axis partitiontable format
+ *
+ * Copyright (c) 2001, 2002, 2003 Axis Communications AB
+ *
+ * This file is under the GPL.
+ *
+ * First partition is always sector 0 regardless of if we find a partitiontable
+ * or not. In the start of the next sector, there can be a partitiontable that
+ * tells us what other partitions to define. If there isn't, we use a default
+ * partition split defined below.
+ *
+ * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5
+ * with minor changes.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/mtd/concat.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/mtdram.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/arch/hwregs/config_defs.h>
+#include <asm/axisflashmap.h>
+#include <asm/mmu.h>
+
+#define MEM_CSE0_SIZE (0x04000000)
+#define MEM_CSE1_SIZE (0x04000000)
+
+#define FLASH_UNCACHED_ADDR  KSEG_E
+#define FLASH_CACHED_ADDR    KSEG_F
+
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==1
+#define flash_data __u8
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
+#define flash_data __u16
+#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
+#define flash_data __u16
+#endif
+
+/* From head.S */
+extern unsigned long romfs_start, romfs_length, romfs_in_flash;
+
+/* The master mtd for the entire flash. */
+struct mtd_info* axisflash_mtd = NULL;
+
+/* Map driver functions. */
+
+static map_word flash_read(struct map_info *map, unsigned long ofs)
+{
+	map_word tmp;
+	tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs);
+	return tmp;
+}
+
+static void flash_copy_from(struct map_info *map, void *to,
+			    unsigned long from, ssize_t len)
+{
+	memcpy(to, (void *)(map->map_priv_1 + from), len);
+}
+
+static void flash_write(struct map_info *map, map_word d, unsigned long adr)
+{
+	*(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0];
+}
+
+/*
+ * The map for chip select e0.
+ *
+ * We run into tricky coherence situations if we mix cached with uncached
+ * accesses to we only use the uncached version here.
+ *
+ * The size field is the total size where the flash chips may be mapped on the
+ * chip select. MTD probes should find all devices there and it does not matter
+ * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD
+ * probes will ignore them.
+ *
+ * The start address in map_priv_1 is in virtual memory so we cannot use
+ * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start
+ * address of cse0.
+ */
+static struct map_info map_cse0 = {
+	.name = "cse0",
+	.size = MEM_CSE0_SIZE,
+	.bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+	.read = flash_read,
+	.copy_from = flash_copy_from,
+	.write = flash_write,
+	.map_priv_1 = FLASH_UNCACHED_ADDR
+};
+
+/*
+ * The map for chip select e1.
+ *
+ * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong
+ * address, but there isn't.
+ */
+static struct map_info map_cse1 = {
+	.name = "cse1",
+	.size = MEM_CSE1_SIZE,
+	.bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH,
+	.read = flash_read,
+	.copy_from = flash_copy_from,
+	.write = flash_write,
+	.map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE
+};
+
+/* If no partition-table was found, we use this default-set. */
+#define MAX_PARTITIONS         7
+#define NUM_DEFAULT_PARTITIONS 3
+
+/*
+ * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+ * size of one flash block and "filesystem"-partition needs 5 blocks to be able
+ * to use JFFS.
+ */
+static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+	{
+		.name = "boot firmware",
+		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0
+	},
+	{
+		.name = "kernel",
+		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+		.offset = CONFIG_ETRAX_PTABLE_SECTOR
+	},
+	{
+		.name = "filesystem",
+		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
+	}
+};
+
+/* Initialize the ones normally used. */
+static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
+	{
+		.name = "part0",
+		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+		.offset = 0
+	},
+	{
+		.name = "part1",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part2",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part3",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part4",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part5",
+		.size = 0,
+		.offset = 0
+	},
+	{
+		.name = "part6",
+		.size = 0,
+		.offset = 0
+	},
+};
+
+/*
+ * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
+ * chips in that order (because the amd_flash-driver is faster).
+ */
+static struct mtd_info *probe_cs(struct map_info *map_cs)
+{
+	struct mtd_info *mtd_cs = NULL;
+
+	printk(KERN_INFO
+	       "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
+	       map_cs->name, map_cs->size, map_cs->map_priv_1);
+
+#ifdef CONFIG_MTD_AMDSTD
+	mtd_cs = do_map_probe("amd_flash", map_cs);
+#endif
+#ifdef CONFIG_MTD_CFI
+	if (!mtd_cs) {
+		mtd_cs = do_map_probe("cfi_probe", map_cs);
+	}
+#endif
+
+	return mtd_cs;
+}
+
+/*
+ * Probe each chip select individually for flash chips. If there are chips on
+ * both cse0 and cse1, the mtd_info structs will be concatenated to one struct
+ * so that MTD partitions can cross chip boundries.
+ *
+ * The only known restriction to how you can mount your chips is that each
+ * chip select must hold similar flash chips. But you need external hardware
+ * to do that anyway and you can put totally different chips on cse0 and cse1
+ * so it isn't really much of a restriction.
+ */
+extern struct mtd_info* __init crisv32_nand_flash_probe (void);
+static struct mtd_info *flash_probe(void)
+{
+	struct mtd_info *mtd_cse0;
+	struct mtd_info *mtd_cse1;
+	struct mtd_info *mtd_nand = NULL;
+	struct mtd_info *mtd_total;
+	struct mtd_info *mtds[3];
+	int count = 0;
+
+	if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL)
+		mtds[count++] = mtd_cse0;
+	if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL)
+		mtds[count++] = mtd_cse1;
+
+#ifdef CONFIG_ETRAX_NANDFLASH
+	if ((mtd_nand = crisv32_nand_flash_probe()) != NULL)
+		mtds[count++] = mtd_nand;
+#endif
+
+	if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) {
+		/* No chip found. */
+		return NULL;
+	}
+
+	if (count > 1) {
+#ifdef CONFIG_MTD_CONCAT
+		/* Since the concatenation layer adds a small overhead we
+		 * could try to figure out if the chips in cse0 and cse1 are
+		 * identical and reprobe the whole cse0+cse1 window. But since
+		 * flash chips are slow, the overhead is relatively small.
+		 * So we use the MTD concatenation layer instead of further
+		 * complicating the probing procedure.
+		 */
+		mtd_total = mtd_concat_create(mtds,
+		                              count,
+		                              "cse0+cse1+nand");
+#else
+		printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
+		       "(mis)configuration!\n", map_cse0.name, map_cse1.name);
+		mtd_toal = NULL;
+#endif
+		if (!mtd_total) {
+			printk(KERN_ERR "%s and %s: Concatenation failed!\n",
+			       map_cse0.name, map_cse1.name);
+
+			/* The best we can do now is to only use what we found
+			 * at cse0.
+			 */
+			mtd_total = mtd_cse0;
+			map_destroy(mtd_cse1);
+		}
+	} else {
+		mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand;
+
+	}
+
+	return mtd_total;
+}
+
+extern unsigned long crisv32_nand_boot;
+extern unsigned long crisv32_nand_cramfs_offset;
+
+/*
+ * Probe the flash chip(s) and, if it succeeds, read the partition-table
+ * and register the partitions with MTD.
+ */
+static int __init init_axis_flash(void)
+{
+	struct mtd_info *mymtd;
+	int err = 0;
+	int pidx = 0;
+	struct partitiontable_head *ptable_head = NULL;
+	struct partitiontable_entry *ptable;
+	int use_default_ptable = 1; /* Until proven otherwise. */
+	const char *pmsg = KERN_INFO "  /dev/flash%d at 0x%08x, size 0x%08x\n";
+	static char page[512];
+	size_t len;
+
+#ifndef CONFIG_ETRAXFS_SIM
+	mymtd = flash_probe();
+	mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page);
+	ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET);
+
+	if (!mymtd) {
+		/* There's no reason to use this module if no flash chip can
+		 * be identified. Make sure that's understood.
+		 */
+		printk(KERN_INFO "axisflashmap: Found no flash chip.\n");
+	} else {
+		printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n",
+		       mymtd->name, mymtd->size);
+		axisflash_mtd = mymtd;
+	}
+
+	if (mymtd) {
+		mymtd->owner = THIS_MODULE;
+	}
+	pidx++;  /* First partition is always set to the default. */
+
+	if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC)
+	    && (ptable_head->size <
+		(MAX_PARTITIONS * sizeof(struct partitiontable_entry) +
+		PARTITIONTABLE_END_MARKER_SIZE))
+	    && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) +
+				  ptable_head->size -
+				  PARTITIONTABLE_END_MARKER_SIZE)
+		== PARTITIONTABLE_END_MARKER)) {
+		/* Looks like a start, sane length and end of a
+		 * partition table, lets check csum etc.
+		 */
+		int ptable_ok = 0;
+		struct partitiontable_entry *max_addr =
+			(struct partitiontable_entry *)
+			((unsigned long)ptable_head + sizeof(*ptable_head) +
+			 ptable_head->size);
+		unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
+		unsigned char *p;
+		unsigned long csum = 0;
+
+		ptable = (struct partitiontable_entry *)
+			((unsigned long)ptable_head + sizeof(*ptable_head));
+
+		/* Lets be PARANOID, and check the checksum. */
+		p = (unsigned char*) ptable;
+
+		while (p <= (unsigned char*)max_addr) {
+			csum += *p++;
+			csum += *p++;
+			csum += *p++;
+			csum += *p++;
+		}
+		ptable_ok = (csum == ptable_head->checksum);
+
+		/* Read the entries and use/show the info.  */
+		printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n",
+		       (ptable_ok ? " valid" : "n invalid"), ptable_head,
+		       max_addr);
+
+		/* We have found a working bootblock.  Now read the
+		 * partition table.  Scan the table.  It ends when
+		 * there is 0xffffffff, that is, empty flash.
+		 */
+		while (ptable_ok
+		       && ptable->offset != 0xffffffff
+		       && ptable < max_addr
+		       && pidx < MAX_PARTITIONS) {
+
+			axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0);
+			axis_partitions[pidx].size = ptable->size;
+
+			printk(pmsg, pidx, axis_partitions[pidx].offset,
+			       axis_partitions[pidx].size);
+			pidx++;
+			ptable++;
+		}
+		use_default_ptable = !ptable_ok;
+	}
+
+	if (romfs_in_flash) {
+		/* Add an overlapping device for the root partition (romfs). */
+
+		axis_partitions[pidx].name = "romfs";
+		if (crisv32_nand_boot) {
+			char* data = kmalloc(1024, GFP_KERNEL);
+			int len;
+			int offset = crisv32_nand_cramfs_offset & ~(1024-1);
+			char* tmp;
+
+			mymtd->read(mymtd, offset, 1024, &len, data);
+			tmp = &data[crisv32_nand_cramfs_offset % 512];
+			axis_partitions[pidx].size = *(unsigned*)(tmp + 4);
+			axis_partitions[pidx].offset = crisv32_nand_cramfs_offset;
+			kfree(data);
+		} else {
+			axis_partitions[pidx].size = romfs_length;
+			axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
+		}
+
+		axis_partitions[pidx].mask_flags |= MTD_WRITEABLE;
+
+		printk(KERN_INFO
+                       " Adding readonly flash partition for romfs image:\n");
+		printk(pmsg, pidx, axis_partitions[pidx].offset,
+		       axis_partitions[pidx].size);
+		pidx++;
+	}
+
+        if (mymtd) {
+		if (use_default_ptable) {
+			printk(KERN_INFO " Using default partition table.\n");
+			err = add_mtd_partitions(mymtd, axis_default_partitions,
+						 NUM_DEFAULT_PARTITIONS);
+		} else {
+			err = add_mtd_partitions(mymtd, axis_partitions, pidx);
+		}
+
+		if (err) {
+			panic("axisflashmap could not add MTD partitions!\n");
+		}
+	}
+/* CONFIG_EXTRAXFS_SIM */
+#endif
+
+	if (!romfs_in_flash) {
+		/* Create an RAM device for the root partition (romfs). */
+
+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+		/* No use trying to boot this kernel from RAM. Panic! */
+		printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
+		       "device due to kernel (mis)configuration!\n");
+		panic("This kernel cannot boot from RAM!\n");
+#else
+		struct mtd_info *mtd_ram;
+
+		mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
+						     GFP_KERNEL);
+		if (!mtd_ram) {
+			panic("axisflashmap couldn't allocate memory for "
+			      "mtd_info!\n");
+		}
+
+		printk(KERN_INFO " Adding RAM partition for romfs image:\n");
+		printk(pmsg, pidx, romfs_start, romfs_length);
+
+		err = mtdram_init_device(mtd_ram, (void*)romfs_start,
+		                         romfs_length, "romfs");
+		if (err) {
+			panic("axisflashmap could not initialize MTD RAM "
+			      "device!\n");
+		}
+#endif
+	}
+
+	return err;
+}
+
+/* This adds the above to the kernels init-call chain. */
+module_init(init_axis_flash);
+
+EXPORT_SYMBOL(axisflash_mtd);

arch/cris/arch-v32/drivers/gpio.c

@@ -0,0 +1,766 @@
+/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $
+ *
+ * ETRAX CRISv32 general port I/O device
+ *
+ * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ *
+ * Authors:    Bjorn Wesen      (initial version)
+ *             Ola Knutsson     (LED handling)
+ *             Johan Adolfsson  (read/set directions, write, port G,
+ *                               port to ETRAX FS.
+ *
+ * $Log: gpio.c,v $
+ * Revision 1.16  2005/06/19 17:06:49  starvik
+ * Merge of Linux 2.6.12.
+ *
+ * Revision 1.15  2005/05/25 08:22:20  starvik
+ * Changed GPIO port order to fit packages/devices/axis-2.4.
+ *
+ * Revision 1.14  2005/04/24 18:35:08  starvik
+ * Updated with final register headers.
+ *
+ * Revision 1.13  2005/03/15 15:43:00  starvik
+ * dev_id needs to be supplied for shared IRQs.
+ *
+ * Revision 1.12  2005/03/10 17:12:00  starvik
+ * Protect alarm list with spinlock.
+ *
+ * Revision 1.11  2005/01/05 06:08:59  starvik
+ * No need to do local_irq_disable after local_irq_save.
+ *
+ * Revision 1.10  2004/11/19 08:38:31  starvik
+ * Removed old crap.
+ *
+ * Revision 1.9  2004/05/14 07:58:02  starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.8  2003/09/11 07:29:50  starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.7  2003/07/10 13:25:46  starvik
+ * Compiles for 2.5.74
+ * Lindented ethernet.c
+ *
+ * Revision 1.6  2003/07/04 08:27:46  starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.5  2003/06/10 08:26:37  johana
+ * Etrax -> ETRAX CRISv32
+ *
+ * Revision 1.4  2003/06/05 14:22:48  johana
+ * Initialise some_alarms.
+ *
+ * Revision 1.3  2003/06/05 10:15:46  johana
+ * New INTR_VECT macros.
+ * Enable interrupts in global config.
+ *
+ * Revision 1.2  2003/06/03 15:52:50  johana
+ * Initial CRIS v32 version.
+ *
+ * Revision 1.1  2003/06/03 08:53:15  johana
+ * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7.
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/etraxgpio.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/gio_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+/* The following gio ports on ETRAX FS is available:
+ * pa  8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
+ * pb 18 bits
+ * pc 18 bits
+ * pd 18 bits
+ * pe 18 bits
+ * each port has a rw_px_dout, r_px_din and rw_px_oe register.
+ */
+
+#define GPIO_MAJOR 120  /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+static int gpio_ioctl(struct inode *inode, struct file *file,
+		      unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+                          loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+	struct gpio_private *next;
+	/* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
+	unsigned char clk_mask;
+	unsigned char data_mask;
+	unsigned char write_msb;
+	unsigned char pad1;
+	/* These fields are generic */
+	unsigned long highalarm, lowalarm;
+	wait_queue_head_t alarm_wq;
+	int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist = 0;
+
+static int gpio_some_alarms = 0; /* Set if someone uses alarm */
+static unsigned long gpio_pa_high_alarms = 0;
+static unsigned long gpio_pa_low_alarms = 0;
+
+static DEFINE_SPINLOCK(alarm_lock);
+
+#define NUM_PORTS (GPIO_MINOR_LAST+1)
+#define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
+#define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
+unsigned long led_dummy;
+
+static volatile unsigned long *data_out[NUM_PORTS] = {
+	GIO_REG_WR_ADDR(rw_pa_dout),
+	GIO_REG_WR_ADDR(rw_pb_dout),
+	&led_dummy,
+	GIO_REG_WR_ADDR(rw_pc_dout),
+	GIO_REG_WR_ADDR(rw_pd_dout),
+	GIO_REG_WR_ADDR(rw_pe_dout),
+};
+
+static volatile unsigned long *data_in[NUM_PORTS] = {
+	GIO_REG_RD_ADDR(r_pa_din),
+	GIO_REG_RD_ADDR(r_pb_din),
+	&led_dummy,
+	GIO_REG_RD_ADDR(r_pc_din),
+	GIO_REG_RD_ADDR(r_pd_din),
+	GIO_REG_RD_ADDR(r_pe_din),
+};
+
+static unsigned long changeable_dir[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PB_CHANGEABLE_DIR,
+	0,
+	CONFIG_ETRAX_PC_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PD_CHANGEABLE_DIR,
+	CONFIG_ETRAX_PE_CHANGEABLE_DIR,
+};
+
+static unsigned long changeable_bits[NUM_PORTS] = {
+	CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PB_CHANGEABLE_BITS,
+	0,
+	CONFIG_ETRAX_PC_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PD_CHANGEABLE_BITS,
+	CONFIG_ETRAX_PE_CHANGEABLE_BITS,
+};
+
+static volatile unsigned long *dir_oe[NUM_PORTS] = {
+	GIO_REG_WR_ADDR(rw_pa_oe),
+	GIO_REG_WR_ADDR(rw_pb_oe),
+	&led_dummy,
+	GIO_REG_WR_ADDR(rw_pc_oe),
+	GIO_REG_WR_ADDR(rw_pd_oe),
+	GIO_REG_WR_ADDR(rw_pe_oe),
+};
+
+
+
+static unsigned int
+gpio_poll(struct file *file,
+	  poll_table *wait)
+{
+	unsigned int mask = 0;
+	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	unsigned long data;
+	poll_wait(file, &priv->alarm_wq, wait);
+	if (priv->minor == GPIO_MINOR_A) {
+		reg_gio_rw_intr_cfg intr_cfg;
+		unsigned long tmp;
+		unsigned long flags;
+
+		local_irq_save(flags);
+		data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, REG_RD(gio, regi_gio, r_pa_din));
+		/* PA has support for interrupt
+		 * lets activate high for those low and with highalarm set
+		 */
+		intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+
+		tmp = ~data & priv->highalarm & 0xFF;
+                if (tmp & (1 << 0)) {
+			intr_cfg.pa0 = regk_gio_hi;
+		}
+                if (tmp & (1 << 1)) {
+			intr_cfg.pa1 = regk_gio_hi;
+		}
+                if (tmp & (1 << 2)) {
+			intr_cfg.pa2 = regk_gio_hi;
+		}
+                if (tmp & (1 << 3)) {
+			intr_cfg.pa3 = regk_gio_hi;
+		}
+                if (tmp & (1 << 4)) {
+			intr_cfg.pa4 = regk_gio_hi;
+		}
+                if (tmp & (1 << 5)) {
+			intr_cfg.pa5 = regk_gio_hi;
+		}
+                if (tmp & (1 << 6)) {
+			intr_cfg.pa6 = regk_gio_hi;
+		}
+                if (tmp & (1 << 7)) {
+			intr_cfg.pa7 = regk_gio_hi;
+		}
+		/*
+		 * lets activate low for those high and with lowalarm set
+		 */
+		tmp = data & priv->lowalarm & 0xFF;
+                if (tmp & (1 << 0)) {
+			intr_cfg.pa0 = regk_gio_lo;
+		}
+                if (tmp & (1 << 1)) {
+			intr_cfg.pa1 = regk_gio_lo;
+		}
+                if (tmp & (1 << 2)) {
+			intr_cfg.pa2 = regk_gio_lo;
+		}
+                if (tmp & (1 << 3)) {
+			intr_cfg.pa3 = regk_gio_lo;
+		}
+                if (tmp & (1 << 4)) {
+			intr_cfg.pa4 = regk_gio_lo;
+		}
+                if (tmp & (1 << 5)) {
+			intr_cfg.pa5 = regk_gio_lo;
+		}
+                if (tmp & (1 << 6)) {
+			intr_cfg.pa6 = regk_gio_lo;
+		}
+                if (tmp & (1 << 7)) {
+			intr_cfg.pa7 = regk_gio_lo;
+		}
+
+		REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+		local_irq_restore(flags);
+	} else if (priv->minor <= GPIO_MINOR_E)
+		data = *data_in[priv->minor];
+	else
+		return 0;
+
+	if ((data & priv->highalarm) ||
+	    (~data & priv->lowalarm)) {
+		mask = POLLIN|POLLRDNORM;
+	}
+
+	DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+	return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+	struct gpio_private *priv = alarmlist;
+	unsigned long data = 0;
+        int ret = 0;
+	while (priv) {
+		data = *data_in[priv->minor];
+		if ((data & priv->highalarm) ||
+		    (~data & priv->lowalarm)) {
+			DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
+			wake_up_interruptible(&priv->alarm_wq);
+                        ret = 1;
+		}
+		priv = priv->next;
+	}
+        return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	if (gpio_some_alarms) {
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+	}
+        return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	reg_gio_rw_intr_mask intr_mask;
+	reg_gio_r_masked_intr masked_intr;
+	reg_gio_rw_ack_intr ack_intr;
+	unsigned long tmp;
+	unsigned long tmp2;
+
+	/* Find what PA interrupts are active */
+	masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
+	tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
+
+	/* Find those that we have enabled */
+	spin_lock(&alarm_lock);
+	tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
+	spin_unlock(&alarm_lock);
+
+	/* Ack them */
+	ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
+	REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
+
+	/* Disable those interrupts.. */
+	intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+	tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
+	tmp2 &= ~tmp;
+	intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
+	REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+	if (gpio_some_alarms) {
+		return IRQ_RETVAL(etrax_gpio_wake_up_check());
+	}
+        return IRQ_NONE;
+}
+
+
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+                          loff_t *off)
+{
+	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	unsigned char data, clk_mask, data_mask, write_msb;
+	unsigned long flags;
+	unsigned long shadow;
+	volatile unsigned long *port;
+	ssize_t retval = count;
+	/* Only bits 0-7 may be used for write operations but allow all
+	   devices except leds... */
+	if (priv->minor == GPIO_MINOR_LEDS) {
+		return -EFAULT;
+	}
+
+	if (!access_ok(VERIFY_READ, buf, count)) {
+		return -EFAULT;
+	}
+	clk_mask = priv->clk_mask;
+	data_mask = priv->data_mask;
+	/* It must have been configured using the IO_CFG_WRITE_MODE */
+	/* Perhaps a better error code? */
+	if (clk_mask == 0 || data_mask == 0) {
+		return -EPERM;
+	}
+	write_msb = priv->write_msb;
+	D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
+	port = data_out[priv->minor];
+
+	while (count--) {
+		int i;
+		data = *buf++;
+		if (priv->write_msb) {
+			for (i = 7; i >= 0;i--) {
+				local_irq_save(flags);
+				shadow = *port;
+				*port = shadow &= ~clk_mask;
+				if (data & 1<<i)
+					*port = shadow |= data_mask;
+				else
+					*port = shadow &= ~data_mask;
+			/* For FPGA: min 5.0ns (DCC) before CCLK high */
+				*port = shadow |= clk_mask;
+				local_irq_restore(flags);
+			}
+		} else {
+			for (i = 0; i <= 7;i++) {
+				local_irq_save(flags);
+				shadow = *port;
+				*port = shadow &= ~clk_mask;
+				if (data & 1<<i)
+					*port = shadow |= data_mask;
+				else
+					*port = shadow &= ~data_mask;
+			/* For FPGA: min 5.0ns (DCC) before CCLK high */
+				*port = shadow |= clk_mask;
+				local_irq_restore(flags);
+			}
+		}
+	}
+	return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *priv;
+	int p = MINOR(inode->i_rdev);
+
+	if (p > GPIO_MINOR_LAST)
+		return -EINVAL;
+
+	priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+					      GFP_KERNEL);
+
+	if (!priv)
+		return -ENOMEM;
+
+	priv->minor = p;
+
+	/* initialize the io/alarm struct and link it into our alarmlist */
+
+	priv->next = alarmlist;
+	alarmlist = priv;
+	priv->clk_mask = 0;
+	priv->data_mask = 0;
+	priv->highalarm = 0;
+	priv->lowalarm = 0;
+	init_waitqueue_head(&priv->alarm_wq);
+
+	filp->private_data = (void *)priv;
+
+	return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+	struct gpio_private *p = alarmlist;
+	struct gpio_private *todel = (struct gpio_private *)filp->private_data;
+	/* local copies while updating them: */
+	unsigned long a_high, a_low;
+	unsigned long some_alarms;
+
+	/* unlink from alarmlist and free the private structure */
+
+	if (p == todel) {
+		alarmlist = todel->next;
+	} else {
+		while (p->next != todel)
+			p = p->next;
+		p->next = todel->next;
+	}
+
+	kfree(todel);
+	/* Check if there are still any alarms set */
+	p = alarmlist;
+        some_alarms = 0;
+	a_high = 0;
+	a_low = 0;
+	while (p) {
+		if (p->minor == GPIO_MINOR_A) {
+			a_high |= p->highalarm;
+			a_low |= p->lowalarm;
+		}
+
+		if (p->highalarm | p->lowalarm) {
+			some_alarms = 1;
+		}
+		p = p->next;
+	}
+
+	spin_lock(&alarm_lock);
+	gpio_some_alarms = some_alarms;
+	gpio_pa_high_alarms = a_high;
+	gpio_pa_low_alarms = a_low;
+	spin_unlock(&alarm_lock);
+
+	return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+{
+	/* Set direction 0=unchanged 1=input,
+	 * return mask with 1=input
+	 */
+	unsigned long flags;
+	unsigned long dir_shadow;
+
+	local_irq_save(flags);
+	dir_shadow = *dir_oe[priv->minor];
+	dir_shadow &= ~(arg & changeable_dir[priv->minor]);
+	*dir_oe[priv->minor] = dir_shadow;
+	local_irq_restore(flags);
+
+	if (priv->minor == GPIO_MINOR_A)
+		dir_shadow ^= 0xFF;    /* Only 8 bits */
+	else
+		dir_shadow ^= 0x3FFFF; /* Only 18 bits */
+	return dir_shadow;
+
+} /* setget_input */
+
+unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long dir_shadow;
+
+	local_irq_save(flags);
+	dir_shadow = *dir_oe[priv->minor];
+	dir_shadow |=  (arg & changeable_dir[priv->minor]);
+	*dir_oe[priv->minor] = dir_shadow;
+	local_irq_restore(flags);
+	return dir_shadow;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+	   unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned long val;
+	unsigned long shadow;
+	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
+		return -EINVAL;
+	}
+
+	switch (_IOC_NR(cmd)) {
+	case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+		// read the port
+		return *data_in[priv->minor];
+		break;
+	case IO_SETBITS:
+		local_irq_save(flags);
+                if (arg & 0x04)
+                  printk("GPIO SET 2\n");
+		// set changeable bits with a 1 in arg
+		shadow = *data_out[priv->minor];
+		shadow |=  (arg & changeable_bits[priv->minor]);
+		*data_out[priv->minor] = shadow;
+		local_irq_restore(flags);
+		break;
+	case IO_CLRBITS:
+		local_irq_save(flags);
+                if (arg & 0x04)
+                  printk("GPIO CLR 2\n");
+		// clear changeable bits with a 1 in arg
+		shadow = *data_out[priv->minor];
+		shadow &=  ~(arg & changeable_bits[priv->minor]);
+		*data_out[priv->minor] = shadow;
+		local_irq_restore(flags);
+		break;
+	case IO_HIGHALARM:
+		// set alarm when bits with 1 in arg go high
+		priv->highalarm |= arg;
+		spin_lock(&alarm_lock);
+		gpio_some_alarms = 1;
+		if (priv->minor == GPIO_MINOR_A) {
+			gpio_pa_high_alarms |= arg;
+		}
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_LOWALARM:
+		// set alarm when bits with 1 in arg go low
+		priv->lowalarm |= arg;
+		spin_lock(&alarm_lock);
+		gpio_some_alarms = 1;
+		if (priv->minor == GPIO_MINOR_A) {
+			gpio_pa_low_alarms |= arg;
+		}
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_CLRALARM:
+		// clear alarm for bits with 1 in arg
+		priv->highalarm &= ~arg;
+		priv->lowalarm  &= ~arg;
+		spin_lock(&alarm_lock);
+		if (priv->minor == GPIO_MINOR_A) {
+			if (gpio_pa_high_alarms & arg ||
+			    gpio_pa_low_alarms & arg) {
+				/* Must update the gpio_pa_*alarms masks */
+			}
+		}
+		spin_unlock(&alarm_lock);
+		break;
+	case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+		/* Read direction 0=input 1=output */
+		return *dir_oe[priv->minor];
+	case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+		/* Set direction 0=unchanged 1=input,
+		 * return mask with 1=input
+		 */
+		return setget_input(priv, arg);
+		break;
+	case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+		/* Set direction 0=unchanged 1=output,
+		 * return mask with 1=output
+		 */
+		return setget_output(priv, arg);
+
+	case IO_CFG_WRITE_MODE:
+	{
+		unsigned long dir_shadow;
+		dir_shadow = *dir_oe[priv->minor];
+
+		priv->clk_mask = arg & 0xFF;
+		priv->data_mask = (arg >> 8) & 0xFF;
+		priv->write_msb = (arg >> 16) & 0x01;
+		/* Check if we're allowed to change the bits and
+		 * the direction is correct
+		 */
+		if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+		      (priv->data_mask & changeable_bits[priv->minor]) &&
+		      (priv->clk_mask & dir_shadow) &&
+		      (priv->data_mask & dir_shadow)))
+		{
+			priv->clk_mask = 0;
+			priv->data_mask = 0;
+			return -EPERM;
+		}
+		break;
+	}
+	case IO_READ_INBITS:
+		/* *arg is result of reading the input pins */
+		val = *data_in[priv->minor];
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		return 0;
+		break;
+	case IO_READ_OUTBITS:
+		 /* *arg is result of reading the output shadow */
+		val = *data_out[priv->minor];
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_INPUT:
+		/* bits set in *arg is set to input,
+		 * *arg updated with current input pins.
+		 */
+		if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_input(priv, val);
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	case IO_SETGET_OUTPUT:
+		/* bits set in *arg is set to output,
+		 * *arg updated with current output pins.
+		 */
+		if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+			return -EFAULT;
+		val = setget_output(priv, val);
+		if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+			return -EFAULT;
+		break;
+	default:
+		if (priv->minor == GPIO_MINOR_LEDS)
+			return gpio_leds_ioctl(cmd, arg);
+		else
+			return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+	unsigned char green;
+	unsigned char red;
+
+	switch (_IOC_NR(cmd)) {
+	case IO_LEDACTIVE_SET:
+		green = ((unsigned char) arg) & 1;
+		red   = (((unsigned char) arg) >> 1) & 1;
+		LED_ACTIVE_SET_G(green);
+		LED_ACTIVE_SET_R(red);
+		break;
+
+	default:
+		return -EINVAL;
+	} /* switch */
+
+	return 0;
+}
+
+struct file_operations gpio_fops = {
+	.owner       = THIS_MODULE,
+	.poll        = gpio_poll,
+	.ioctl       = gpio_ioctl,
+	.write       = gpio_write,
+	.open        = gpio_open,
+	.release     = gpio_release,
+};
+
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+	int res;
+	reg_intr_vect_rw_mask intr_mask;
+
+	/* do the formalities */
+
+	res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+	if (res < 0) {
+		printk(KERN_ERR "gpio: couldn't get a major number.\n");
+		return res;
+	}
+
+	/* Clear all leds */
+	LED_NETWORK_SET(0);
+	LED_ACTIVE_SET(0);
+	LED_DISK_READ(0);
+	LED_DISK_WRITE(0);
+
+	printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n");
+	/* We call etrax_gpio_wake_up_check() from timer interrupt and
+	 * from cpu_idle() in kernel/process.c
+	 * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
+	 * in some tests.
+	 */
+	if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt,
+			SA_SHIRQ | SA_INTERRUPT,"gpio poll", &alarmlist)) {
+		printk("err: timer0 irq for gpio\n");
+	}
+	if (request_irq(GEN_IO_INTR_VECT, gpio_pa_interrupt,
+			SA_SHIRQ | SA_INTERRUPT,"gpio PA", &alarmlist)) {
+		printk("err: PA irq for gpio\n");
+	}
+	/* enable the gio and timer irq in global config */
+	intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+	intr_mask.timer = 1;
+	intr_mask.gen_io = 1;
+	REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+	return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);

arch/cris/arch-v32/drivers/i2c.c

@@ -0,0 +1,611 @@
+/*!***************************************************************************
+*!
+*! FILE NAME  : i2c.c
+*!
+*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
+*!              kernel modules (i2c_writereg/readreg) and from userspace using
+*!              ioctl()'s
+*!
+*! Nov 30 1998  Torbjorn Eliasson  Initial version.
+*!              Bjorn Wesen        Elinux kernel version.
+*! Jan 14 2000  Johan Adolfsson    Fixed PB shadow register stuff -
+*!                                 don't use PB_I2C if DS1302 uses same bits,
+*!                                 use PB.
+*| June 23 2003 Pieter Grimmerink  Added 'i2c_sendnack'. i2c_readreg now
+*|                                 generates nack on last received byte,
+*|                                 instead of ack.
+*|                                 i2c_getack changed data level while clock
+*|                                 was high, causing DS75 to see  a stop condition
+*!
+*! ---------------------------------------------------------------------------
+*!
+*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
+*!
+*!***************************************************************************/
+/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */
+/****************** INCLUDE FILES SECTION ***********************************/
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/config.h>
+
+#include <asm/etraxi2c.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include "i2c.h"
+
+/****************** I2C DEFINITION SECTION *************************/
+
+#define D(x)
+
+#define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
+static const char i2c_name[] = "i2c";
+
+#define CLOCK_LOW_TIME            8
+#define CLOCK_HIGH_TIME           8
+#define START_CONDITION_HOLD_TIME 8
+#define STOP_CONDITION_HOLD_TIME  8
+#define ENABLE_OUTPUT 0x01
+#define ENABLE_INPUT 0x00
+#define I2C_CLOCK_HIGH 1
+#define I2C_CLOCK_LOW 0
+#define I2C_DATA_HIGH 1
+#define I2C_DATA_LOW 0
+
+#define i2c_enable()
+#define i2c_disable()
+
+/* enable or disable output-enable, to select output or input on the i2c bus */
+
+#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out)
+#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in)
+
+/* control the i2c clock and data signals */
+
+#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x)
+#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x)
+
+/* read a bit from the i2c interface */
+
+#define i2c_getbit() crisv32_io_rd(&cris_i2c_data)
+
+#define i2c_delay(usecs) udelay(usecs)
+
+/****************** VARIABLE SECTION ************************************/
+
+static struct crisv32_iopin cris_i2c_clk;
+static struct crisv32_iopin cris_i2c_data;
+
+/****************** FUNCTION DEFINITION SECTION *************************/
+
+
+/* generate i2c start condition */
+
+void
+i2c_start(void)
+{
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_dir_out();
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_data(I2C_DATA_HIGH);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(START_CONDITION_HOLD_TIME);
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+}
+
+/* generate i2c stop condition */
+
+void
+i2c_stop(void)
+{
+	i2c_dir_out();
+
+	/*
+	 * SCL=0 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME*2);
+	/*
+	 * SCL=1 SDA=0
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME*2);
+	/*
+	 * SCL=1 SDA=1
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(STOP_CONDITION_HOLD_TIME);
+
+	i2c_dir_in();
+}
+
+/* write a byte to the i2c interface */
+
+void
+i2c_outbyte(unsigned char x)
+{
+	int i;
+
+	i2c_dir_out();
+
+	for (i = 0; i < 8; i++) {
+		if (x & 0x80) {
+			i2c_data(I2C_DATA_HIGH);
+		} else {
+			i2c_data(I2C_DATA_LOW);
+		}
+
+		i2c_delay(CLOCK_LOW_TIME/2);
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME/2);
+		x <<= 1;
+	}
+	i2c_data(I2C_DATA_LOW);
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+}
+
+/* read a byte from the i2c interface */
+
+unsigned char
+i2c_inbyte(void)
+{
+	unsigned char aBitByte = 0;
+	int i;
+
+	/* Switch off I2C to get bit */
+	i2c_disable();
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/2);
+
+	/* Get bit */
+	aBitByte |= i2c_getbit();
+
+	/* Enable I2C */
+	i2c_enable();
+	i2c_delay(CLOCK_LOW_TIME/2);
+
+	for (i = 1; i < 8; i++) {
+		aBitByte <<= 1;
+		/* Clock pulse */
+		i2c_clk(I2C_CLOCK_HIGH);
+		i2c_delay(CLOCK_HIGH_TIME);
+		i2c_clk(I2C_CLOCK_LOW);
+		i2c_delay(CLOCK_LOW_TIME);
+
+		/* Switch off I2C to get bit */
+		i2c_disable();
+		i2c_dir_in();
+		i2c_delay(CLOCK_HIGH_TIME/2);
+
+		/* Get bit */
+		aBitByte |= i2c_getbit();
+
+		/* Enable I2C */
+		i2c_enable();
+		i2c_delay(CLOCK_LOW_TIME/2);
+	}
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+
+	/*
+	 * we leave the clock low, getbyte is usually followed
+	 * by sendack/nack, they assume the clock to be low
+	 */
+	i2c_clk(I2C_CLOCK_LOW);
+	return aBitByte;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_getack
+*#
+*# DESCRIPTION  : checks if ack was received from ic2
+*#
+*#--------------------------------------------------------------------------*/
+
+int
+i2c_getack(void)
+{
+	int ack = 1;
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * Release data bus by setting
+	 * data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * enable input
+	 */
+	i2c_dir_in();
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * generate ACK clock pulse
+	 */
+	i2c_clk(I2C_CLOCK_HIGH);
+	/*
+	 * Use PORT PB instead of I2C
+	 * for input. (I2C not working)
+	 */
+	i2c_clk(1);
+	i2c_data(1);
+	/*
+	 * switch off I2C
+	 */
+	i2c_data(1);
+	i2c_disable();
+	i2c_dir_in();
+	/*
+	 * now wait for ack
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	/*
+	 * check for ack
+	 */
+	if(i2c_getbit())
+		ack = 0;
+	i2c_delay(CLOCK_HIGH_TIME/2);
+	if(!ack){
+		if(!i2c_getbit()) /* receiver pulld SDA low */
+			ack = 1;
+		i2c_delay(CLOCK_HIGH_TIME/2);
+	}
+
+   /*
+    * our clock is high now, make sure data is low
+    * before we enable our output. If we keep data high
+    * and enable output, we would generate a stop condition.
+    */
+   i2c_data(I2C_DATA_LOW);
+
+	/*
+	 * end clock pulse
+	 */
+	i2c_enable();
+	i2c_dir_out();
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_HIGH_TIME/4);
+	/*
+	 * enable output
+	 */
+	i2c_dir_out();
+	/*
+	 * remove ACK clock pulse
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME/2);
+	return ack;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: I2C::sendAck
+*#
+*# DESCRIPTION  : Send ACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set ack pulse high
+	 */
+	i2c_data(I2C_DATA_LOW);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME/6);
+	/*
+	 * reset data out
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_sendnack
+*#
+*# DESCRIPTION  : Sends NACK on received data
+*#
+*#--------------------------------------------------------------------------*/
+void
+i2c_sendnack(void)
+{
+	/*
+	 * enable output
+	 */
+	i2c_delay(CLOCK_LOW_TIME);
+	i2c_dir_out();
+	/*
+	 * set data high
+	 */
+	i2c_data(I2C_DATA_HIGH);
+	/*
+	 * generate clock pulse
+	 */
+	i2c_delay(CLOCK_HIGH_TIME/6);
+	i2c_clk(I2C_CLOCK_HIGH);
+	i2c_delay(CLOCK_HIGH_TIME);
+	i2c_clk(I2C_CLOCK_LOW);
+	i2c_delay(CLOCK_LOW_TIME);
+
+	i2c_dir_in();
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_writereg
+*#
+*# DESCRIPTION  : Writes a value to an I2C device
+*#
+*#--------------------------------------------------------------------------*/
+int
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
+	     unsigned char theValue)
+{
+	int error, cntr = 3;
+	unsigned long flags;
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+                local_irq_save(flags);
+
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 2;
+		/*
+		 * send register register data
+		 */
+		i2c_outbyte(theValue);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error |= 4;
+		/*
+		 * end byte stream
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+
+	} while(error && cntr--);
+
+	i2c_delay(CLOCK_LOW_TIME);
+
+	return -error;
+}
+
+/*#---------------------------------------------------------------------------
+*#
+*# FUNCTION NAME: i2c_readreg
+*#
+*# DESCRIPTION  : Reads a value from the decoder registers.
+*#
+*#--------------------------------------------------------------------------*/
+unsigned char
+i2c_readreg(unsigned char theSlave, unsigned char theReg)
+{
+	unsigned char b = 0;
+	int error, cntr = 3;
+	unsigned long flags;
+
+	do {
+		error = 0;
+		/*
+		 * we don't like to be interrupted
+		 */
+                local_irq_save(flags);
+		/*
+		 * generate start condition
+		 */
+		i2c_start();
+
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte((theSlave & 0xfe));
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * now select register
+		 */
+		i2c_dir_out();
+		i2c_outbyte(theReg);
+		/*
+		 * now it's time to wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * repeat start condition
+		 */
+		i2c_delay(CLOCK_LOW_TIME);
+		i2c_start();
+		/*
+		 * send slave address
+		 */
+		i2c_outbyte(theSlave | 0x01);
+		/*
+		 * wait for ack
+		 */
+		if(!i2c_getack())
+			error = 1;
+		/*
+		 * fetch register
+		 */
+		b = i2c_inbyte();
+		/*
+		 * last received byte needs to be nacked
+		 * instead of acked
+		 */
+		i2c_sendnack();
+		/*
+		 * end sequence
+		 */
+		i2c_stop();
+		/*
+		 * enable interrupt again
+		 */
+		local_irq_restore(flags);
+
+	} while(error && cntr--);
+
+	return b;
+}
+
+static int
+i2c_open(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+static int
+i2c_release(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+/* Main device API. ioctl's to write or read to/from i2c registers.
+ */
+
+static int
+i2c_ioctl(struct inode *inode, struct file *file,
+	  unsigned int cmd, unsigned long arg)
+{
+	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
+		return -EINVAL;
+	}
+
+	switch (_IOC_NR(cmd)) {
+		case I2C_WRITEREG:
+			/* write to an i2c slave */
+			D(printk("i2cw %d %d %d\n",
+				 I2C_ARGSLAVE(arg),
+				 I2C_ARGREG(arg),
+				 I2C_ARGVALUE(arg)));
+
+			return i2c_writereg(I2C_ARGSLAVE(arg),
+					    I2C_ARGREG(arg),
+					    I2C_ARGVALUE(arg));
+		case I2C_READREG:
+		{
+			unsigned char val;
+			/* read from an i2c slave */
+			D(printk("i2cr %d %d ",
+				I2C_ARGSLAVE(arg),
+				I2C_ARGREG(arg)));
+			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			D(printk("= %d\n", val));
+			return val;
+		}
+		default:
+			return -EINVAL;
+
+	}
+
+	return 0;
+}
+
+static struct file_operations i2c_fops = {
+	owner:    THIS_MODULE,
+	ioctl:    i2c_ioctl,
+	open:     i2c_open,
+	release:  i2c_release,
+};
+
+int __init
+i2c_init(void)
+{
+	int res;
+
+	/* Setup and enable the Port B I2C interface */
+
+        crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT);
+        crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT);
+
+	/* register char device */
+
+	res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
+	if(res < 0) {
+		printk(KERN_ERR "i2c: couldn't get a major number.\n");
+		return res;
+	}
+
+	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+
+	return 0;
+}
+
+/* this makes sure that i2c_init is called during boot */
+
+module_init(i2c_init);
+
+/****************** END OF FILE i2c.c ********************************/

arch/cris/arch-v32/drivers/i2c.h

@@ -0,0 +1,15 @@
+
+#include <linux/init.h>
+
+/* High level I2C actions */
+int __init i2c_init(void);
+int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
+unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
+
+/* Low level I2C */
+void i2c_start(void);
+void i2c_stop(void);
+void i2c_outbyte(unsigned char x);
+unsigned char i2c_inbyte(void);
+int i2c_getack(void);
+void i2c_sendack(void);

arch/cris/arch-v32/drivers/iop_fw_load.c

@@ -0,0 +1,219 @@
+/* $Id: iop_fw_load.c,v 1.4 2005/04/07 09:27:46 larsv Exp $
+ *
+ * Firmware loader for ETRAX FS IO-Processor
+ *
+ * Copyright (C) 2004  Axis Communications AB
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/iop/iop_reg_space.h>
+#include <asm/arch/hwregs/iop/iop_mpu_macros.h>
+#include <asm/arch/hwregs/iop/iop_mpu_defs.h>
+#include <asm/arch/hwregs/iop/iop_spu_defs.h>
+#include <asm/arch/hwregs/iop/iop_sw_cpu_defs.h>
+
+#define IOP_TIMEOUT 100
+
+static struct device iop_spu_device[2] = {
+	{ .bus_id =     "iop-spu0", },
+	{ .bus_id =     "iop-spu1", },
+};
+
+static struct device iop_mpu_device = {
+	.bus_id =       "iop-mpu",
+};
+
+static int wait_mpu_idle(void)
+{
+	reg_iop_mpu_r_stat mpu_stat;
+	unsigned int timeout = IOP_TIMEOUT;
+
+	do {
+		mpu_stat = REG_RD(iop_mpu, regi_iop_mpu, r_stat);
+	} while (mpu_stat.instr_reg_busy == regk_iop_mpu_yes && --timeout > 0);
+	if (timeout == 0) {
+		printk(KERN_ERR "Timeout waiting for MPU to be idle\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+int iop_fw_load_spu(const unsigned char *fw_name, unsigned int spu_inst)
+{
+	reg_iop_sw_cpu_rw_mc_ctrl mc_ctrl = {
+		.wr_spu0_mem =    regk_iop_sw_cpu_no,
+		.wr_spu1_mem =    regk_iop_sw_cpu_no,
+		.size =           4,
+		.cmd =            regk_iop_sw_cpu_reg_copy,
+		.keep_owner =     regk_iop_sw_cpu_yes
+	};
+	reg_iop_spu_rw_ctrl spu_ctrl = {
+		.en  =            regk_iop_spu_no,
+		.fsm =            regk_iop_spu_no,
+	};
+	reg_iop_sw_cpu_r_mc_stat mc_stat;
+        const struct firmware *fw_entry;
+	u32 *data;
+	unsigned int timeout;
+	int retval, i;
+
+	if (spu_inst > 1)
+		return -ENODEV;
+
+	/* get firmware */
+	retval = request_firmware(&fw_entry,
+				  fw_name,
+				  &iop_spu_device[spu_inst]);
+	if (retval != 0)
+	{
+		printk(KERN_ERR
+		       "iop_load_spu: Failed to load firmware \"%s\"\n",
+		       fw_name);
+		return retval;
+	}
+	data = (u32 *) fw_entry->data;
+
+	/* acquire ownership of memory controller */
+	switch (spu_inst) {
+	case 0:
+		mc_ctrl.wr_spu0_mem = regk_iop_sw_cpu_yes;
+		REG_WR(iop_spu, regi_iop_spu0, rw_ctrl, spu_ctrl);
+		break;
+	case 1:
+		mc_ctrl.wr_spu1_mem = regk_iop_sw_cpu_yes;
+		REG_WR(iop_spu, regi_iop_spu1, rw_ctrl, spu_ctrl);
+		break;
+	}
+	timeout = IOP_TIMEOUT;
+	do {
+		REG_WR(iop_sw_cpu, regi_iop_sw_cpu, rw_mc_ctrl, mc_ctrl);
+		mc_stat = REG_RD(iop_sw_cpu, regi_iop_sw_cpu, r_mc_stat);
+	} while (mc_stat.owned_by_cpu == regk_iop_sw_cpu_no && --timeout > 0);
+	if (timeout == 0) {
+		printk(KERN_ERR "Timeout waiting to acquire MC\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	/* write to SPU memory */
+	for (i = 0; i < (fw_entry->size/4); i++) {
+		switch (spu_inst) {
+		case 0:
+			REG_WR_INT(iop_spu, regi_iop_spu0, rw_seq_pc, (i*4));
+			break;
+		case 1:
+			REG_WR_INT(iop_spu, regi_iop_spu1, rw_seq_pc, (i*4));
+			break;
+		}
+		REG_WR_INT(iop_sw_cpu, regi_iop_sw_cpu, rw_mc_data, *data);
+		data++;
+	}
+
+	/* release ownership of memory controller */
+	(void) REG_RD(iop_sw_cpu, regi_iop_sw_cpu, rs_mc_data);
+
+ out:
+	release_firmware(fw_entry);
+	return retval;
+}
+
+int iop_fw_load_mpu(unsigned char *fw_name)
+{
+	const unsigned int start_addr = 0;
+	reg_iop_mpu_rw_ctrl mpu_ctrl;
+        const struct firmware *fw_entry;
+	u32 *data;
+	int retval, i;
+
+	/* get firmware */
+	retval = request_firmware(&fw_entry, fw_name, &iop_mpu_device);
+	if (retval != 0)
+	{
+		printk(KERN_ERR
+		       "iop_load_spu: Failed to load firmware \"%s\"\n",
+		       fw_name);
+		return retval;
+	}
+	data = (u32 *) fw_entry->data;
+
+	/* disable MPU */
+	mpu_ctrl.en = regk_iop_mpu_no;
+	REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl);
+	/* put start address in R0 */
+	REG_WR_VECT(iop_mpu, regi_iop_mpu, rw_r, 0, start_addr);
+	/* write to memory by executing 'SWX i, 4, R0' for each word */
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_SWX_IIR_INSTR(0, 4, 0));
+	for (i = 0; i < (fw_entry->size / 4); i++) {
+		REG_WR_INT(iop_mpu, regi_iop_mpu, rw_immediate, *data);
+		if ((retval = wait_mpu_idle()) != 0)
+			goto out;
+		data++;
+	}
+
+ out:
+	release_firmware(fw_entry);
+	return retval;
+}
+
+int iop_start_mpu(unsigned int start_addr)
+{
+	reg_iop_mpu_rw_ctrl mpu_ctrl = { .en = regk_iop_mpu_yes };
+	int retval;
+
+	/* disable MPU */
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_HALT());
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	/* set PC and wait for it to bite */
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	REG_WR_INT(iop_mpu, regi_iop_mpu, rw_instr, MPU_BA_I(start_addr));
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	/* make sure the MPU starts executing with interrupts disabled */
+	REG_WR(iop_mpu, regi_iop_mpu, rw_instr, MPU_DI());
+	if ((retval = wait_mpu_idle()) != 0)
+		goto out;
+	/* enable MPU */
+	REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl);
+ out:
+	return retval;
+}
+
+static int __init iop_fw_load_init(void)
+{
+	device_initialize(&iop_spu_device[0]);
+	kobject_set_name(&iop_spu_device[0].kobj, "iop-spu0");
+	kobject_add(&iop_spu_device[0].kobj);
+	device_initialize(&iop_spu_device[1]);
+	kobject_set_name(&iop_spu_device[1].kobj, "iop-spu1");
+	kobject_add(&iop_spu_device[1].kobj);
+	device_initialize(&iop_mpu_device);
+	kobject_set_name(&iop_mpu_device.kobj, "iop-mpu");
+	kobject_add(&iop_mpu_device.kobj);
+	return 0;
+}
+
+static void __exit iop_fw_load_exit(void)
+{
+}
+
+module_init(iop_fw_load_init);
+module_exit(iop_fw_load_exit);
+
+MODULE_DESCRIPTION("ETRAX FS IO-Processor Firmware Loader");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(iop_fw_load_spu);
+EXPORT_SYMBOL(iop_fw_load_mpu);
+EXPORT_SYMBOL(iop_start_mpu);

arch/cris/arch-v32/drivers/nandflash.c

@@ -0,0 +1,157 @@
+/*
+ *  arch/cris/arch-v32/drivers/nandflash.c
+ *
+ *  Copyright (c) 2004
+ *
+ *  Derived from drivers/mtd/nand/spia.c
+ * 	  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/arch/memmap.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/gio_defs.h>
+#include <asm/arch/hwregs/bif_core_defs.h>
+#include <asm/io.h>
+
+#define CE_BIT 4
+#define CLE_BIT 5
+#define ALE_BIT 6
+#define BY_BIT 7
+
+static struct mtd_info *crisv32_mtd = NULL;
+/*
+ *	hardware specific access to control-lines
+*/
+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	unsigned long flags;
+	reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout);
+
+	local_irq_save(flags);
+	switch(cmd){
+		case NAND_CTL_SETCLE:
+		     dout.data |= (1<<CLE_BIT);
+		     break;
+		case NAND_CTL_CLRCLE:
+		     dout.data &= ~(1<<CLE_BIT);
+		     break;
+		case NAND_CTL_SETALE:
+		     dout.data |= (1<<ALE_BIT);
+		     break;
+		case NAND_CTL_CLRALE:
+		     dout.data &= ~(1<<ALE_BIT);
+		     break;
+		case NAND_CTL_SETNCE:
+		     dout.data |= (1<<CE_BIT);
+		     break;
+		case NAND_CTL_CLRNCE:
+		     dout.data &= ~(1<<CE_BIT);
+		     break;
+	}
+	REG_WR(gio, regi_gio, rw_pa_dout, dout);
+	local_irq_restore(flags);
+}
+
+/*
+*	read device ready pin
+*/
+int crisv32_device_ready(struct mtd_info *mtd)
+{
+	reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din);
+	return ((din.data & (1 << BY_BIT)) >> BY_BIT);
+}
+
+/*
+ * Main initialization routine
+ */
+struct mtd_info* __init crisv32_nand_flash_probe (void)
+{
+	void __iomem *read_cs;
+	void __iomem *write_cs;
+
+	reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg);
+	reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe);
+	struct nand_chip *this;
+	int err = 0;
+
+	/* Allocate memory for MTD device structure and private data */
+	crisv32_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+				GFP_KERNEL);
+	if (!crisv32_mtd) {
+		printk ("Unable to allocate CRISv32 NAND MTD device structure.\n");
+		err = -ENOMEM;
+		return NULL;
+	}
+
+	read_cs = ioremap(MEM_CSP0_START | MEM_NON_CACHEABLE, 8192);
+	write_cs = ioremap(MEM_CSP1_START | MEM_NON_CACHEABLE, 8192);
+
+	if (!read_cs || !write_cs) {
+		printk("CRISv32 NAND ioremap failed\n");
+		err = -EIO;
+		goto out_mtd;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&crisv32_mtd[1]);
+
+	pa_oe.oe |= 1 << CE_BIT;
+	pa_oe.oe |= 1 << ALE_BIT;
+	pa_oe.oe |= 1 << CLE_BIT;
+	pa_oe.oe &= ~ (1 << BY_BIT);
+	REG_WR(gio, regi_gio, rw_pa_oe, pa_oe);
+
+	bif_cfg.gated_csp0 = regk_bif_core_rd;
+	bif_cfg.gated_csp1 = regk_bif_core_wr;
+	REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg);
+
+	/* Initialize structures */
+	memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	crisv32_mtd->priv = this;
+
+	/* Set address of NAND IO lines */
+	this->IO_ADDR_R = read_cs;
+	this->IO_ADDR_W = write_cs;
+	this->hwcontrol = crisv32_hwcontrol;
+	this->dev_ready = crisv32_device_ready;
+	/* 20 us command delay time */
+	this->chip_delay = 20;
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Enable the following for a flash based bad block table */
+	this->options = NAND_USE_FLASH_BBT;
+
+	/* Scan to find existance of the device */
+	if (nand_scan (crisv32_mtd, 1)) {
+		err = -ENXIO;
+		goto out_ior;
+	}
+
+	return crisv32_mtd;
+
+out_ior:
+	iounmap((void *)read_cs);
+	iounmap((void *)write_cs);
+out_mtd:
+	kfree (crisv32_mtd);
+        return NULL;
+}
+

arch/cris/arch-v32/drivers/pcf8563.c

@@ -0,0 +1,341 @@
+/*
+ * PCF8563 RTC
+ *
+ * From Phillips' datasheet:
+ *
+ * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
+ * consumption. A programmable clock output, interupt output and voltage
+ * low detector are also provided. All address and data are transferred
+ * serially via two-line bidirectional I2C-bus. Maximum bus speed is
+ * 400 kbits/s. The built-in word address register is incremented
+ * automatically after each written or read byte.
+ *
+ * Copyright (c) 2002-2003, Axis Communications AB
+ * All rights reserved.
+ *
+ * Author: Tobias Anderberg <tobiasa@axis.com>.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/bcd.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+
+#include "i2c.h"
+
+#define PCF8563_MAJOR	121	/* Local major number. */
+#define DEVICE_NAME	"rtc"	/* Name which is registered in /proc/devices. */
+#define PCF8563_NAME	"PCF8563"
+#define DRIVER_VERSION	"$Revision: 1.1 $"
+
+/* Two simple wrapper macros, saves a few keystrokes. */
+#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
+#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
+
+static const unsigned char days_in_month[] =
+	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+int pcf8563_open(struct inode *, struct file *);
+int pcf8563_release(struct inode *, struct file *);
+
+static struct file_operations pcf8563_fops = {
+	owner: THIS_MODULE,
+	ioctl: pcf8563_ioctl,
+	open: pcf8563_open,
+	release: pcf8563_release,
+};
+
+unsigned char
+pcf8563_readreg(int reg)
+{
+	unsigned char res = rtc_read(reg);
+
+	/* The PCF8563 does not return 0 for unimplemented bits */
+	switch (reg) {
+		case RTC_SECONDS:
+		case RTC_MINUTES:
+			res &= 0x7F;
+			break;
+		case RTC_HOURS:
+		case RTC_DAY_OF_MONTH:
+			res &= 0x3F;
+			break;
+		case RTC_WEEKDAY:
+			res &= 0x07;
+			break;
+		case RTC_MONTH:
+			res &= 0x1F;
+			break;
+		case RTC_CONTROL1:
+			res &= 0xA8;
+			break;
+		case RTC_CONTROL2:
+			res &= 0x1F;
+			break;
+		case RTC_CLOCKOUT_FREQ:
+		case RTC_TIMER_CONTROL:
+			res &= 0x83;
+			break;
+	}
+	return res;
+}
+
+void
+pcf8563_writereg(int reg, unsigned char val)
+{
+#ifdef CONFIG_ETRAX_RTC_READONLY
+	if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
+		return;
+#endif
+
+	rtc_write(reg, val);
+}
+
+void
+get_rtc_time(struct rtc_time *tm)
+{
+	tm->tm_sec  = rtc_read(RTC_SECONDS);
+	tm->tm_min  = rtc_read(RTC_MINUTES);
+	tm->tm_hour = rtc_read(RTC_HOURS);
+	tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
+	tm->tm_wday = rtc_read(RTC_WEEKDAY);
+	tm->tm_mon  = rtc_read(RTC_MONTH);
+	tm->tm_year = rtc_read(RTC_YEAR);
+
+	if (tm->tm_sec & 0x80)
+		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
+		       "information is no longer guaranteed!\n", PCF8563_NAME);
+
+	tm->tm_year  = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
+	tm->tm_sec  &= 0x7F;
+	tm->tm_min  &= 0x7F;
+	tm->tm_hour &= 0x3F;
+	tm->tm_mday &= 0x3F;
+	tm->tm_wday &= 0x07; /* Not coded in BCD. */
+	tm->tm_mon  &= 0x1F;
+
+	BCD_TO_BIN(tm->tm_sec);
+	BCD_TO_BIN(tm->tm_min);
+	BCD_TO_BIN(tm->tm_hour);
+	BCD_TO_BIN(tm->tm_mday);
+	BCD_TO_BIN(tm->tm_mon);
+	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
+}
+
+int __init
+pcf8563_init(void)
+{
+	/* Initiate the i2c protocol. */
+	i2c_init();
+
+	/*
+	 * First of all we need to reset the chip. This is done by
+	 * clearing control1, control2 and clk freq and resetting
+	 * all alarms.
+	 */
+	if (rtc_write(RTC_CONTROL1, 0x00) < 0)
+		goto err;
+
+	if (rtc_write(RTC_CONTROL2, 0x00) < 0)
+		goto err;
+
+	if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
+		goto err;
+
+	if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
+		goto err;
+
+	/* Reset the alarms. */
+	if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
+		goto err;
+
+	if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
+		goto err;
+
+	if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
+		goto err;
+
+	if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
+		goto err;
+
+	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
+		printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
+		       PCF8563_NAME, PCF8563_MAJOR);
+		return -1;
+	}
+
+	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
+
+	/* Check for low voltage, and warn about it.. */
+	if (rtc_read(RTC_SECONDS) & 0x80)
+		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
+		       "information is no longer guaranteed!\n", PCF8563_NAME);
+
+	return 0;
+
+err:
+	printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
+	return -1;
+}
+
+void __exit
+pcf8563_exit(void)
+{
+	if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
+		printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME);
+	}
+}
+
+/*
+ * ioctl calls for this driver. Why return -ENOTTY upon error? Because
+ * POSIX says so!
+ */
+int
+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	/* Some sanity checks. */
+	if (_IOC_TYPE(cmd) != RTC_MAGIC)
+		return -ENOTTY;
+
+	if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
+		return -ENOTTY;
+
+	switch (cmd) {
+		case RTC_RD_TIME:
+		{
+			struct rtc_time tm;
+
+			memset(&tm, 0, sizeof (struct rtc_time));
+			get_rtc_time(&tm);
+
+			if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) {
+				return -EFAULT;
+			}
+
+			return 0;
+		}
+
+		case RTC_SET_TIME:
+		{
+#ifdef CONFIG_ETRAX_RTC_READONLY
+			return -EPERM;
+#else
+			int leap;
+			int year;
+			int century;
+			struct rtc_time tm;
+
+			if (!capable(CAP_SYS_TIME))
+				return -EPERM;
+
+			if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
+				return -EFAULT;
+
+			/* Convert from struct tm to struct rtc_time. */
+			tm.tm_year += 1900;
+			tm.tm_mon += 1;
+
+			/*
+			 * Check if tm.tm_year is a leap year. A year is a leap
+			 * year if it is divisible by 4 but not 100, except
+			 * that years divisible by 400 _are_ leap years.
+			 */
+			year = tm.tm_year;
+			leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
+
+			/* Perform some sanity checks. */
+			if ((tm.tm_year < 1970) ||
+			    (tm.tm_mon > 12) ||
+			    (tm.tm_mday == 0) ||
+			    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
+			    (tm.tm_wday >= 7) ||
+			    (tm.tm_hour >= 24) ||
+			    (tm.tm_min >= 60) ||
+			    (tm.tm_sec >= 60))
+				return -EINVAL;
+
+			century = (tm.tm_year >= 2000) ? 0x80 : 0;
+			tm.tm_year = tm.tm_year % 100;
+
+			BIN_TO_BCD(tm.tm_year);
+			BIN_TO_BCD(tm.tm_mday);
+			BIN_TO_BCD(tm.tm_hour);
+			BIN_TO_BCD(tm.tm_min);
+			BIN_TO_BCD(tm.tm_sec);
+			tm.tm_mon |= century;
+
+			rtc_write(RTC_YEAR, tm.tm_year);
+			rtc_write(RTC_MONTH, tm.tm_mon);
+			rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
+			rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
+			rtc_write(RTC_HOURS, tm.tm_hour);
+			rtc_write(RTC_MINUTES, tm.tm_min);
+			rtc_write(RTC_SECONDS, tm.tm_sec);
+
+			return 0;
+#endif /* !CONFIG_ETRAX_RTC_READONLY */
+		}
+
+		case RTC_VLOW_RD:
+		{
+			int vl_bit = 0;
+
+			if (rtc_read(RTC_SECONDS) & 0x80) {
+				vl_bit = 1;
+				printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
+				       "date/time information is no longer guaranteed!\n",
+				       PCF8563_NAME);
+			}
+			if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
+				return -EFAULT;
+
+			return 0;
+		}
+
+		case RTC_VLOW_SET:
+		{
+			/* Clear the VL bit in the seconds register */
+			int ret = rtc_read(RTC_SECONDS);
+
+			rtc_write(RTC_SECONDS, (ret & 0x7F));
+
+			return 0;
+		}
+
+		default:
+			return -ENOTTY;
+	}
+
+	return 0;
+}
+
+int
+pcf8563_open(struct inode *inode, struct file *filp)
+{
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+int
+pcf8563_release(struct inode *inode, struct file *filp)
+{
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+module_init(pcf8563_init);
+module_exit(pcf8563_exit);

arch/cris/arch-v32/drivers/pci/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for Etrax cardbus driver
+#
+
+obj-$(CONFIG_ETRAX_CARDBUS)        += bios.o dma.o

arch/cris/arch-v32/drivers/pci/bios.c

@@ -0,0 +1,131 @@
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <asm/arch/hwregs/intr_vect.h>
+
+void __devinit  pcibios_fixup_bus(struct pci_bus *b)
+{
+}
+
+char * __devinit  pcibios_setup(char *str)
+{
+	return NULL;
+}
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long prot;
+
+	/* Leave vm_pgoff as-is, the PCI space address is the physical
+	 * address on this platform.
+	 */
+	vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO);
+
+	prot = pgprot_val(vma->vm_page_prot);
+	vma->vm_page_prot = __pgprot(prot);
+
+	/* Write-combine setting is ignored, it is changed via the mtrr
+	 * interfaces on this platform.
+	 */
+	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			     vma->vm_end - vma->vm_start,
+			     vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+void
+pcibios_align_resource(void *data, struct resource *res,
+		       unsigned long size, unsigned long align)
+{
+	if (res->flags & IORESOURCE_IO) {
+		unsigned long start = res->start;
+
+		if (start & 0x300) {
+			start = (start + 0x3ff) & ~0x3ff;
+			res->start = start;
+		}
+	}
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for(idx=0; idx<6; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1<<idx)))
+			continue;
+
+		r = &dev->resource[idx];
+		if (!r->start && r->end) {
+			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	if (dev->resource[PCI_ROM_RESOURCE].start)
+		cmd |= PCI_COMMAND_MEMORY;
+	if (cmd != old_cmd) {
+		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+int pcibios_enable_irq(struct pci_dev *dev)
+{
+	dev->irq = EXT_INTR_VECT;
+	return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int err;
+
+	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+		return err;
+
+	return pcibios_enable_irq(dev);
+}
+
+int pcibios_assign_resources(void)
+{
+	struct pci_dev *dev = NULL;
+	int idx;
+	struct resource *r;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int class = dev->class >> 8;
+
+		/* Don't touch classless devices and host bridges */
+		if (!class || class == PCI_CLASS_BRIDGE_HOST)
+			continue;
+
+		for(idx=0; idx<6; idx++) {
+			r = &dev->resource[idx];
+
+			if (!r->start && r->end)
+				pci_assign_resource(dev, idx);
+		}
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(pcibios_assign_resources);

arch/cris/arch-v32/drivers/pci/dma.c

@@ -0,0 +1,149 @@
+/*
+ * Dynamic DMA mapping support.
+ *
+ * On cris there is no hardware dynamic DMA address translation,
+ * so consistent alloc/free are merely page allocation/freeing.
+ * The rest of the dynamic DMA mapping interface is implemented
+ * in asm/pci.h.
+ *
+ * Borrowed from i386.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+struct dma_coherent_mem {
+	void		*virt_base;
+	u32		device_base;
+	int		size;
+	int		flags;
+	unsigned long	*bitmap;
+};
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+{
+	void *ret;
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (mem) {
+		int page = bitmap_find_free_region(mem->bitmap, mem->size,
+						     order);
+		if (page >= 0) {
+			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
+			ret = mem->virt_base + (page << PAGE_SHIFT);
+			memset(ret, 0, size);
+			return ret;
+		}
+		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+			return NULL;
+	}
+
+	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, order);
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_phys(ret);
+	}
+	return ret;
+}
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+
+	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+		bitmap_release_region(mem->bitmap, page, order);
+	} else
+		free_pages((unsigned long)vaddr, order);
+}
+
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+				dma_addr_t device_addr, size_t size, int flags)
+{
+	void __iomem *mem_base;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = (pages + 31)/32;
+
+	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+		goto out;
+	if (!size)
+		goto out;
+	if (dev->dma_mem)
+		goto out;
+
+	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+	mem_base = ioremap(bus_addr, size);
+	if (!mem_base)
+		goto out;
+
+	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+	if (!dev->dma_mem)
+		goto out;
+	memset(dev->dma_mem, 0, sizeof(struct dma_coherent_mem));
+	dev->dma_mem->bitmap = kmalloc(bitmap_size, GFP_KERNEL);
+	if (!dev->dma_mem->bitmap)
+		goto free1_out;
+	memset(dev->dma_mem->bitmap, 0, bitmap_size);
+
+	dev->dma_mem->virt_base = mem_base;
+	dev->dma_mem->device_base = device_addr;
+	dev->dma_mem->size = pages;
+	dev->dma_mem->flags = flags;
+
+	if (flags & DMA_MEMORY_MAP)
+		return DMA_MEMORY_MAP;
+
+	return DMA_MEMORY_IO;
+
+ free1_out:
+	kfree(dev->dma_mem->bitmap);
+ out:
+	return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+
+	if(!mem)
+		return;
+	dev->dma_mem = NULL;
+	iounmap(mem->virt_base);
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+					dma_addr_t device_addr, size_t size)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	int pos, err;
+
+	if (!mem)
+		return ERR_PTR(-EINVAL);
+
+	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+	if (err != 0)
+		return ERR_PTR(err);
+	return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);

arch/cris/arch-v32/kernel/Makefile

@@ -0,0 +1,21 @@
+# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $
+#
+# Makefile for the linux kernel.
+#
+
+extra-y	:= head.o
+
+
+obj-y   := entry.o traps.o irq.o debugport.o dma.o pinmux.o \
+	   process.o ptrace.o setup.o signal.o traps.o time.o \
+	   arbiter.o io.o
+
+obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
+
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
+obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
+obj-$(CONFIG_MODULES)    += crisksyms.o
+
+clean:
+

arch/cris/arch-v32/kernel/arbiter.c

@@ -0,0 +1,297 @@
+/*
+ * Memory arbiter functions. Allocates bandwith through the
+ * arbiter and sets up arbiter breakpoints.
+ *
+ * The algorithm first assigns slots to the clients that has specified
+ * bandwith (e.g. ethernet) and then the remaining slots are divided
+ * on all the active clients.
+ *
+ * Copyright (c) 2004, 2005 Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/marb_defs.h>
+#include <asm/arch/arbiter.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct crisv32_watch_entry
+{
+  unsigned long instance;
+  watch_callback* cb;
+  unsigned long start;
+  unsigned long end;
+  int used;
+};
+
+#define NUMBER_OF_BP 4
+#define NBR_OF_CLIENTS 14
+#define NBR_OF_SLOTS 64
+#define SDRAM_BANDWIDTH 100000000 /* Some kind of expected value */
+#define INTMEM_BANDWIDTH 400000000
+#define NBR_OF_REGIONS 2
+
+static struct crisv32_watch_entry watches[NUMBER_OF_BP] =
+{
+  {regi_marb_bp0},
+  {regi_marb_bp1},
+  {regi_marb_bp2},
+  {regi_marb_bp3}
+};
+
+static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS];
+static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS];
+static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH};
+
+DEFINE_SPINLOCK(arbiter_lock);
+
+static irqreturn_t
+crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs);
+
+static void crisv32_arbiter_config(int region)
+{
+	int slot;
+	int client;
+	int interval = 0;
+	int val[NBR_OF_SLOTS];
+
+	for (slot = 0; slot < NBR_OF_SLOTS; slot++)
+	    val[slot] = NBR_OF_CLIENTS + 1;
+
+	for (client = 0; client < NBR_OF_CLIENTS; client++)
+	{
+	    int pos;
+	    if (!requested_slots[region][client])
+	       continue;
+	    interval = NBR_OF_SLOTS / requested_slots[region][client];
+	    pos = 0;
+	    while (pos < NBR_OF_SLOTS)
+	    {
+		if (val[pos] != NBR_OF_CLIENTS + 1)
+		   pos++;
+		else
+		{
+			val[pos] = client;
+			pos += interval;
+		}
+	    }
+	}
+
+	client = 0;
+	for (slot = 0; slot < NBR_OF_SLOTS; slot++)
+	{
+		if (val[slot] == NBR_OF_CLIENTS + 1)
+		{
+			int first = client;
+			while(!active_clients[region][client]) {
+				client = (client + 1) % NBR_OF_CLIENTS;
+				if (client == first)
+				   break;
+			}
+			val[slot] = client;
+			client = (client + 1) % NBR_OF_CLIENTS;
+		}
+		if (region == EXT_REGION)
+		   REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]);
+		else if (region == INT_REGION)
+		   REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]);
+	}
+}
+
+extern char _stext, _etext;
+
+static void crisv32_arbiter_init(void)
+{
+	static int initialized = 0;
+
+	if (initialized)
+		return;
+
+	initialized = 1;
+
+	/* CPU caches are active. */
+	active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1;
+        crisv32_arbiter_config(EXT_REGION);
+        crisv32_arbiter_config(INT_REGION);
+
+	if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, SA_INTERRUPT,
+                        "arbiter", NULL))
+		printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
+
+#ifndef CONFIG_ETRAX_KGDB
+        /* Global watch for writes to kernel text segment. */
+        crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext,
+                              arbiter_all_clients, arbiter_all_write, NULL);
+#endif
+}
+
+
+
+int crisv32_arbiter_allocate_bandwith(int client, int region,
+	                              unsigned long bandwidth)
+{
+	int i;
+	int total_assigned = 0;
+	int total_clients = 0;
+	int req;
+
+	crisv32_arbiter_init();
+
+	for (i = 0; i < NBR_OF_CLIENTS; i++)
+	{
+		total_assigned += requested_slots[region][i];
+		total_clients += active_clients[region][i];
+	}
+	req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth);
+
+	if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS)
+	   return -ENOMEM;
+
+	active_clients[region][client] = 1;
+	requested_slots[region][client] = req;
+	crisv32_arbiter_config(region);
+
+	return 0;
+}
+
+int crisv32_arbiter_watch(unsigned long start, unsigned long size,
+                          unsigned long clients, unsigned long accesses,
+                          watch_callback* cb)
+{
+	int i;
+
+	crisv32_arbiter_init();
+
+	if (start > 0x80000000) {
+		printk("Arbiter: %lX doesn't look like a physical address", start);
+		return -EFAULT;
+	}
+
+	spin_lock(&arbiter_lock);
+
+	for (i = 0; i < NUMBER_OF_BP; i++) {
+		if (!watches[i].used) {
+			reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask);
+
+			watches[i].used = 1;
+			watches[i].start = start;
+			watches[i].end = start + size;
+			watches[i].cb = cb;
+
+			REG_WR_INT(marb_bp, watches[i].instance, rw_first_addr, watches[i].start);
+			REG_WR_INT(marb_bp, watches[i].instance, rw_last_addr, watches[i].end);
+			REG_WR_INT(marb_bp, watches[i].instance, rw_op, accesses);
+			REG_WR_INT(marb_bp, watches[i].instance, rw_clients, clients);
+
+			if (i == 0)
+				intr_mask.bp0 = regk_marb_yes;
+			else if (i == 1)
+				intr_mask.bp1 = regk_marb_yes;
+			else if (i == 2)
+				intr_mask.bp2 = regk_marb_yes;
+			else if (i == 3)
+				intr_mask.bp3 = regk_marb_yes;
+
+			REG_WR(marb, regi_marb, rw_intr_mask, intr_mask);
+			spin_unlock(&arbiter_lock);
+
+			return i;
+		}
+	}
+	spin_unlock(&arbiter_lock);
+	return -ENOMEM;
+}
+
+int crisv32_arbiter_unwatch(int id)
+{
+	reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask);
+
+	crisv32_arbiter_init();
+
+	spin_lock(&arbiter_lock);
+
+	if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) {
+		spin_unlock(&arbiter_lock);
+		return -EINVAL;
+	}
+
+	memset(&watches[id], 0, sizeof(struct crisv32_watch_entry));
+
+	if (id == 0)
+		intr_mask.bp0 = regk_marb_no;
+	else if (id == 1)
+		intr_mask.bp2 = regk_marb_no;
+	else if (id == 2)
+		intr_mask.bp2 = regk_marb_no;
+	else if (id == 3)
+		intr_mask.bp3 = regk_marb_no;
+
+	REG_WR(marb, regi_marb, rw_intr_mask, intr_mask);
+
+	spin_unlock(&arbiter_lock);
+	return 0;
+}
+
+extern void show_registers(struct pt_regs *regs);
+
+static irqreturn_t
+crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs)
+{
+	reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr);
+	reg_marb_bp_r_brk_clients r_clients;
+	reg_marb_bp_r_brk_addr r_addr;
+	reg_marb_bp_r_brk_op r_op;
+	reg_marb_bp_r_brk_first_client r_first;
+	reg_marb_bp_r_brk_size r_size;
+	reg_marb_bp_rw_ack ack = {0};
+	reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1};
+	struct crisv32_watch_entry* watch;
+
+	if (masked_intr.bp0) {
+		watch = &watches[0];
+		ack_intr.bp0 = regk_marb_yes;
+	} else if (masked_intr.bp1) {
+		watch = &watches[1];
+		ack_intr.bp1 = regk_marb_yes;
+	} else if (masked_intr.bp2) {
+		watch = &watches[2];
+		ack_intr.bp2 = regk_marb_yes;
+	} else if (masked_intr.bp3) {
+		watch = &watches[3];
+		ack_intr.bp3 = regk_marb_yes;
+	} else {
+		return IRQ_NONE;
+	}
+
+	/* Retrieve all useful information and print it. */
+	r_clients = REG_RD(marb_bp, watch->instance, r_brk_clients);
+	r_addr = REG_RD(marb_bp, watch->instance, r_brk_addr);
+	r_op = REG_RD(marb_bp, watch->instance, r_brk_op);
+	r_first = REG_RD(marb_bp, watch->instance, r_brk_first_client);
+	r_size = REG_RD(marb_bp, watch->instance, r_brk_size);
+
+	printk("Arbiter IRQ\n");
+	printk("Clients %X addr %X op %X first %X size %X\n",
+	       REG_TYPE_CONV(int, reg_marb_bp_r_brk_clients, r_clients),
+	       REG_TYPE_CONV(int, reg_marb_bp_r_brk_addr, r_addr),
+	       REG_TYPE_CONV(int, reg_marb_bp_r_brk_op, r_op),
+	       REG_TYPE_CONV(int, reg_marb_bp_r_brk_first_client, r_first),
+	       REG_TYPE_CONV(int, reg_marb_bp_r_brk_size, r_size));
+
+	REG_WR(marb_bp, watch->instance, rw_ack, ack);
+	REG_WR(marb, regi_marb, rw_ack_intr, ack_intr);
+
+	printk("IRQ occured at %lX\n", regs->erp);
+
+	if (watch->cb)
+		watch->cb();
+
+
+	return IRQ_HANDLED;
+}

arch/cris/arch-v32/kernel/asm-offsets.c

@@ -0,0 +1,49 @@
+#include <linux/sched.h>
+#include <asm/thread_info.h>
+
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ */
+
+#define DEFINE(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+#define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry))
+	ENTRY(orig_r10);
+	ENTRY(r13);
+	ENTRY(r12);
+	ENTRY(r11);
+        ENTRY(r10);
+        ENTRY(r9);
+	ENTRY(acr);
+	ENTRY(srs);
+        ENTRY(mof);
+        ENTRY(ccs);
+        ENTRY(srp);
+	BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
+        ENTRY(task);
+        ENTRY(flags);
+        ENTRY(preempt_count);
+        BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(THREAD_ ## entry, offsetof(struct thread_struct, entry))
+	ENTRY(ksp);
+        ENTRY(usp);
+        ENTRY(ccs);
+        BLANK();
+#undef ENTRY
+#define ENTRY(entry) DEFINE(TASK_ ## entry, offsetof(struct task_struct, entry))
+        ENTRY(pid);
+        BLANK();
+        DEFINE(LCLONE_VM, CLONE_VM);
+        DEFINE(LCLONE_UNTRACED, CLONE_UNTRACED);
+        return 0;
+}

arch/cris/arch-v32/kernel/crisksyms.c

@@ -0,0 +1,24 @@
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/intmem.h>
+#include <asm/arch/pinmux.h>
+
+/* Functions for allocating DMA channels */
+EXPORT_SYMBOL(crisv32_request_dma);
+EXPORT_SYMBOL(crisv32_free_dma);
+
+/* Functions for handling internal RAM */
+EXPORT_SYMBOL(crisv32_intmem_alloc);
+EXPORT_SYMBOL(crisv32_intmem_free);
+EXPORT_SYMBOL(crisv32_intmem_phys_to_virt);
+EXPORT_SYMBOL(crisv32_intmem_virt_to_phys);
+
+/* Functions for handling pinmux */
+EXPORT_SYMBOL(crisv32_pinmux_alloc);
+EXPORT_SYMBOL(crisv32_pinmux_dealloc);
+
+/* Functions masking/unmasking interrupts */
+EXPORT_SYMBOL(mask_irq);
+EXPORT_SYMBOL(unmask_irq);

arch/cris/arch-v32/kernel/debugport.c

@@ -0,0 +1,461 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/arch/hwregs/ser_defs.h>
+#include <asm/arch/hwregs/dma_defs.h>
+#include <asm/arch/pinmux.h>
+
+#include <asm/irq.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+struct dbg_port
+{
+	unsigned char nbr;
+	unsigned long instance;
+	unsigned int started;
+	unsigned long baudrate;
+	unsigned char parity;
+	unsigned int bits;
+};
+
+struct dbg_port ports[] =
+{
+  {
+    0,
+    regi_ser0,
+    0,
+    115200,
+    'N',
+    8
+  },
+  {
+    1,
+    regi_ser1,
+    0,
+    115200,
+    'N',
+    8
+  },
+  {
+    2,
+    regi_ser2,
+    0,
+    115200,
+    'N',
+    8
+  },
+  {
+    3,
+    regi_ser3,
+    0,
+    115200,
+    'N',
+    8
+  }
+};
+static struct dbg_port *port =
+#if defined(CONFIG_ETRAX_DEBUG_PORT0)
+&ports[0];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+&ports[1];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+&ports[2];
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+&ports[3];
+#else
+NULL;
+#endif
+
+#ifdef CONFIG_ETRAX_KGDB
+static struct dbg_port *kgdb_port =
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+&ports[0];
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+&ports[1];
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+&ports[2];
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+&ports[3];
+#else
+NULL;
+#endif
+#endif
+
+#ifdef CONFIG_ETRAXFS_SIM
+extern void print_str( const char *str );
+static char buffer[1024];
+static char msg[] = "Debug: ";
+static int buffer_pos = sizeof(msg) - 1;
+#endif
+
+extern struct tty_driver *serial_driver;
+
+static void
+start_port(struct dbg_port* p)
+{
+	if (!p)
+		return;
+
+	if (p->started)
+		return;
+	p->started = 1;
+
+	if (p->nbr == 1)
+		crisv32_pinmux_alloc_fixed(pinmux_ser1);
+	else if (p->nbr == 2)
+		crisv32_pinmux_alloc_fixed(pinmux_ser2);
+	else if (p->nbr == 3)
+		crisv32_pinmux_alloc_fixed(pinmux_ser3);
+
+	/* Set up serial port registers */
+	reg_ser_rw_tr_ctrl tr_ctrl = {0};
+	reg_ser_rw_tr_dma_en tr_dma_en = {0};
+
+	reg_ser_rw_rec_ctrl rec_ctrl = {0};
+	reg_ser_rw_tr_baud_div tr_baud_div = {0};
+	reg_ser_rw_rec_baud_div rec_baud_div = {0};
+
+	tr_ctrl.base_freq = rec_ctrl.base_freq = regk_ser_f29_493;
+	tr_dma_en.en = rec_ctrl.dma_mode = regk_ser_no;
+	tr_baud_div.div = rec_baud_div.div = 29493000 / p->baudrate / 8;
+	tr_ctrl.en = rec_ctrl.en = 1;
+
+	if (p->parity == 'O')
+	{
+		tr_ctrl.par_en = regk_ser_yes;
+		tr_ctrl.par = regk_ser_odd;
+		rec_ctrl.par_en = regk_ser_yes;
+		rec_ctrl.par = regk_ser_odd;
+	}
+	else if (p->parity == 'E')
+	{
+		tr_ctrl.par_en = regk_ser_yes;
+		tr_ctrl.par = regk_ser_even;
+		rec_ctrl.par_en = regk_ser_yes;
+		rec_ctrl.par = regk_ser_odd;
+	}
+
+	if (p->bits == 7)
+	{
+		tr_ctrl.data_bits = regk_ser_bits7;
+		rec_ctrl.data_bits = regk_ser_bits7;
+	}
+
+	REG_WR (ser, p->instance, rw_tr_baud_div, tr_baud_div);
+	REG_WR (ser, p->instance, rw_rec_baud_div, rec_baud_div);
+	REG_WR (ser, p->instance, rw_tr_dma_en, tr_dma_en);
+	REG_WR (ser, p->instance, rw_tr_ctrl, tr_ctrl);
+	REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl);
+}
+
+/* No debug */
+#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+	return;
+}
+
+/* Target debug */
+#elif !defined(CONFIG_ETRAXFS_SIM)
+
+static void
+console_write_direct(struct console *co, const char *buf, unsigned int len)
+{
+	int i;
+	reg_ser_r_stat_din stat;
+	reg_ser_rw_tr_dma_en tr_dma_en, old;
+
+	/* Switch to manual mode */
+	tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en);
+	if (tr_dma_en.en == regk_ser_yes) {
+		tr_dma_en.en = regk_ser_no;
+		REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en);
+	}
+
+	/* Send data */
+	for (i = 0; i < len; i++) {
+		/* LF -> CRLF */
+		if (buf[i] == '\n') {
+			do {
+				stat = REG_RD (ser, port->instance, r_stat_din);
+			} while (!stat.tr_rdy);
+			REG_WR_INT (ser, port->instance, rw_dout, '\r');
+		}
+		/* Wait until transmitter is ready and send.*/
+		do {
+			stat = REG_RD (ser, port->instance, r_stat_din);
+		} while (!stat.tr_rdy);
+		REG_WR_INT (ser, port->instance, rw_dout, buf[i]);
+	}
+
+	/* Restore mode */
+	if (tr_dma_en.en != old.en)
+		REG_WR(ser, port->instance, rw_tr_dma_en, old);
+}
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+	if (!port)
+		return;
+        console_write_direct(co, buf, len);
+}
+
+
+
+#else
+
+/* VCS debug */
+
+static void
+console_write(struct console *co, const char *buf, unsigned int len)
+{
+	char* pos;
+	pos = memchr(buf, '\n', len);
+	if (pos) {
+		int l = ++pos - buf;
+		memcpy(buffer + buffer_pos, buf, l);
+		memcpy(buffer, msg, sizeof(msg) - 1);
+		buffer[buffer_pos + l] = '\0';
+		print_str(buffer);
+		buffer_pos = sizeof(msg) - 1;
+		if (pos - buf != len) {
+			memcpy(buffer + buffer_pos, pos, len - l);
+			buffer_pos += len - l;
+		}
+	} else {
+		memcpy(buffer + buffer_pos, buf, len);
+		buffer_pos += len;
+	}
+}
+
+#endif
+
+int raw_printk(const char *fmt, ...)
+{
+	static char buf[1024];
+	int printed_len;
+	va_list args;
+	va_start(args, fmt);
+	printed_len = vsnprintf(buf, sizeof(buf), fmt, args);
+	va_end(args);
+	console_write(NULL, buf, strlen(buf));
+	return printed_len;
+}
+
+void
+stupid_debug(char* buf)
+{
+  console_write(NULL, buf, strlen(buf));
+}
+
+#ifdef CONFIG_ETRAX_KGDB
+/* Use polling to get a single character from the kernel debug port */
+int
+getDebugChar(void)
+{
+	reg_ser_rs_status_data stat;
+	reg_ser_rw_ack_intr ack_intr = { 0 };
+
+	do {
+		stat = REG_RD(ser, kgdb_instance, rs_status_data);
+	} while (!stat.data_avail);
+
+	/* Ack the data_avail interrupt. */
+	ack_intr.data_avail = 1;
+	REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr);
+
+	return stat.data;
+}
+
+/* Use polling to put a single character to the kernel debug port */
+void
+putDebugChar(int val)
+{
+	reg_ser_r_status_data stat;
+	do {
+		stat = REG_RD (ser, kgdb_instance, r_status_data);
+	} while (!stat.tr_ready);
+	REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val));
+}
+#endif /* CONFIG_ETRAX_KGDB */
+
+static int __init
+console_setup(struct console *co, char *options)
+{
+	char* s;
+
+	if (options) {
+		port = &ports[co->index];
+		port->baudrate = 115200;
+		port->parity = 'N';
+		port->bits = 8;
+		port->baudrate = simple_strtoul(options, NULL, 10);
+		s = options;
+		while(*s >= '0' && *s <= '9')
+			s++;
+		if (*s) port->parity = *s++;
+		if (*s) port->bits   = *s++ - '0';
+		port->started = 0;
+		start_port(port);
+	}
+	return 0;
+}
+
+/* This is a dummy serial device that throws away anything written to it.
+ * This is used when no debug output is wanted.
+ */
+static struct tty_driver dummy_driver;
+
+static int dummy_open(struct tty_struct *tty, struct file * filp)
+{
+	return 0;
+}
+
+static void dummy_close(struct tty_struct *tty, struct file * filp)
+{
+}
+
+static int dummy_write(struct tty_struct * tty,
+                       const unsigned char *buf, int count)
+{
+	return count;
+}
+
+static int
+dummy_write_room(struct tty_struct *tty)
+{
+	return 8192;
+}
+
+void __init
+init_dummy_console(void)
+{
+	memset(&dummy_driver, 0, sizeof(struct tty_driver));
+	dummy_driver.driver_name = "serial";
+	dummy_driver.name = "ttyS";
+	dummy_driver.major = TTY_MAJOR;
+	dummy_driver.minor_start = 68;
+	dummy_driver.num = 1;       /* etrax100 has 4 serial ports */
+	dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
+	dummy_driver.subtype = SERIAL_TYPE_NORMAL;
+	dummy_driver.init_termios = tty_std_termios;
+	dummy_driver.init_termios.c_cflag =
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+	dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+
+	dummy_driver.open = dummy_open;
+	dummy_driver.close = dummy_close;
+	dummy_driver.write = dummy_write;
+	dummy_driver.write_room = dummy_write_room;
+	if (tty_register_driver(&dummy_driver))
+		panic("Couldn't register dummy serial driver\n");
+}
+
+static struct tty_driver*
+crisv32_console_device(struct console* co, int *index)
+{
+	if (port)
+		*index = port->nbr;
+        return port ? serial_driver : &dummy_driver;
+}
+
+static struct console sercons = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : crisv32_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : -1,
+	cflag : 0,
+	next : NULL
+};
+static struct console sercons0 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : crisv32_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 0,
+	cflag : 0,
+	next : NULL
+};
+
+static struct console sercons1 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : crisv32_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 1,
+	cflag : 0,
+	next : NULL
+};
+static struct console sercons2 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : crisv32_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 2,
+	cflag : 0,
+	next : NULL
+};
+static struct console sercons3 = {
+	name : "ttyS",
+	write: console_write,
+	read : NULL,
+	device : crisv32_console_device,
+	unblank : NULL,
+	setup : console_setup,
+	flags : CON_PRINTBUFFER,
+	index : 3,
+	cflag : 0,
+	next : NULL
+};
+
+/* Register console for printk's, etc. */
+int __init
+init_etrax_debug(void)
+{
+  	static int first = 1;
+
+	if (!first) {
+		unregister_console(&sercons);
+		register_console(&sercons0);
+		register_console(&sercons1);
+		register_console(&sercons2);
+		register_console(&sercons3);
+		init_dummy_console();
+		return 0;
+	}
+	first = 0;
+        register_console(&sercons);
+        start_port(port);
+
+#ifdef CONFIG_ETRAX_KGDB
+	start_port(kgdb_port);
+#endif /* CONFIG_ETRAX_KGDB */
+	return 0;
+}
+
+__initcall(init_etrax_debug);

arch/cris/arch-v32/kernel/dma.c

@@ -0,0 +1,224 @@
+/* Wrapper for DMA channel allocator that starts clocks etc */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <asm/dma.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/marb_defs.h>
+#include <asm/arch/hwregs/config_defs.h>
+#include <asm/arch/hwregs/strmux_defs.h>
+#include <linux/errno.h>
+#include <asm/system.h>
+#include <asm/arch/arbiter.h>
+
+static char used_dma_channels[MAX_DMA_CHANNELS];
+static const char * used_dma_channels_users[MAX_DMA_CHANNELS];
+
+static DEFINE_SPINLOCK(dma_lock);
+
+int crisv32_request_dma(unsigned int dmanr, const char * device_id,
+                        unsigned options, unsigned int bandwidth,
+			enum dma_owner owner)
+{
+	unsigned long flags;
+	reg_config_rw_clk_ctrl clk_ctrl;
+	reg_strmux_rw_cfg strmux_cfg;
+
+        if (crisv32_arbiter_allocate_bandwith(dmanr,
+                                              options & DMA_INT_MEM ? INT_REGION : EXT_REGION,
+                                              bandwidth))
+          return -ENOMEM;
+
+	spin_lock_irqsave(&dma_lock, flags);
+
+	if (used_dma_channels[dmanr]) {
+		spin_unlock_irqrestore(&dma_lock, flags);
+		if (options & DMA_VERBOSE_ON_ERROR) {
+			printk("Failed to request DMA %i for %s, already allocated by %s\n", dmanr, device_id, used_dma_channels_users[dmanr]);
+		}
+		if (options & DMA_PANIC_ON_ERROR)
+			panic("request_dma error!");
+		return -EBUSY;
+	}
+	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
+	strmux_cfg = REG_RD(strmux, regi_strmux, rw_cfg);
+
+	switch(dmanr)
+	{
+	case 0:
+	case 1:
+		clk_ctrl.dma01_eth0 = 1;
+		break;
+	case 2:
+	case 3:
+		clk_ctrl.dma23 = 1;
+		break;
+	case 4:
+	case 5:
+		clk_ctrl.dma45 = 1;
+		break;
+	case 6:
+	case 7:
+		clk_ctrl.dma67 = 1;
+		break;
+	case 8:
+	case 9:
+		clk_ctrl.dma89_strcop = 1;
+		break;
+#if MAX_DMA_CHANNELS-1 != 9
+#error Check dma.c
+#endif
+	default:
+		spin_unlock_irqrestore(&dma_lock, flags);
+		if (options & DMA_VERBOSE_ON_ERROR) {
+			printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1);
+		}
+
+		if (options & DMA_PANIC_ON_ERROR)
+			panic("request_dma error!");
+		return -EINVAL;
+	}
+
+	switch(owner)
+	{
+	case dma_eth0:
+		if (dmanr == 0)
+			strmux_cfg.dma0 = regk_strmux_eth0;
+		else if (dmanr == 1)
+			strmux_cfg.dma1 = regk_strmux_eth0;
+		else
+			panic("Invalid DMA channel for eth0\n");
+		break;
+	case dma_eth1:
+		if (dmanr == 6)
+			strmux_cfg.dma6 = regk_strmux_eth1;
+		else if (dmanr == 7)
+			strmux_cfg.dma7 = regk_strmux_eth1;
+		else
+			panic("Invalid DMA channel for eth1\n");
+		break;
+	case dma_iop0:
+		if (dmanr == 2)
+			strmux_cfg.dma2 = regk_strmux_iop0;
+		else if (dmanr == 3)
+			strmux_cfg.dma3 = regk_strmux_iop0;
+		else
+			panic("Invalid DMA channel for iop0\n");
+		break;
+	case dma_iop1:
+		if (dmanr == 4)
+			strmux_cfg.dma4 = regk_strmux_iop1;
+		else if (dmanr == 5)
+			strmux_cfg.dma5 = regk_strmux_iop1;
+		else
+			panic("Invalid DMA channel for iop1\n");
+		break;
+	case dma_ser0:
+		if (dmanr == 6)
+			strmux_cfg.dma6 = regk_strmux_ser0;
+		else if (dmanr == 7)
+			strmux_cfg.dma7 = regk_strmux_ser0;
+		else
+			panic("Invalid DMA channel for ser0\n");
+		break;
+	case dma_ser1:
+		if (dmanr == 4)
+			strmux_cfg.dma4 = regk_strmux_ser1;
+		else if (dmanr == 5)
+			strmux_cfg.dma5 = regk_strmux_ser1;
+		else
+			panic("Invalid DMA channel for ser1\n");
+		break;
+	case dma_ser2:
+		if (dmanr == 2)
+			strmux_cfg.dma2 = regk_strmux_ser2;
+		else if (dmanr == 3)
+			strmux_cfg.dma3 = regk_strmux_ser2;
+		else
+			panic("Invalid DMA channel for ser2\n");
+		break;
+	case dma_ser3:
+		if (dmanr == 8)
+			strmux_cfg.dma8 = regk_strmux_ser3;
+		else if (dmanr == 9)
+			strmux_cfg.dma9 = regk_strmux_ser3;
+		else
+			panic("Invalid DMA channel for ser3\n");
+		break;
+	case dma_sser0:
+		if (dmanr == 4)
+			strmux_cfg.dma4 = regk_strmux_sser0;
+		else if (dmanr == 5)
+			strmux_cfg.dma5 = regk_strmux_sser0;
+		else
+			panic("Invalid DMA channel for sser0\n");
+		break;
+	case dma_sser1:
+		if (dmanr == 6)
+			strmux_cfg.dma6 = regk_strmux_sser1;
+		else if (dmanr == 7)
+			strmux_cfg.dma7 = regk_strmux_sser1;
+		else
+			panic("Invalid DMA channel for sser1\n");
+		break;
+	case dma_ata:
+		if (dmanr == 2)
+			strmux_cfg.dma2 = regk_strmux_ata;
+		else if (dmanr == 3)
+			strmux_cfg.dma3 = regk_strmux_ata;
+		else
+			panic("Invalid DMA channel for ata\n");
+		break;
+	case dma_strp:
+		if (dmanr == 8)
+			strmux_cfg.dma8 = regk_strmux_strcop;
+		else if (dmanr == 9)
+			strmux_cfg.dma9 = regk_strmux_strcop;
+		else
+			panic("Invalid DMA channel for strp\n");
+		break;
+	case dma_ext0:
+		if (dmanr == 6)
+			strmux_cfg.dma6 = regk_strmux_ext0;
+		else
+			panic("Invalid DMA channel for ext0\n");
+		break;
+	case dma_ext1:
+		if (dmanr == 7)
+			strmux_cfg.dma7 = regk_strmux_ext1;
+		else
+			panic("Invalid DMA channel for ext1\n");
+		break;
+	case dma_ext2:
+		if (dmanr == 2)
+			strmux_cfg.dma2 = regk_strmux_ext2;
+		else if (dmanr == 8)
+			strmux_cfg.dma8 = regk_strmux_ext2;
+		else
+			panic("Invalid DMA channel for ext2\n");
+		break;
+	case dma_ext3:
+		if (dmanr == 3)
+			strmux_cfg.dma3 = regk_strmux_ext3;
+		else if (dmanr == 9)
+			strmux_cfg.dma9 = regk_strmux_ext2;
+		else
+			panic("Invalid DMA channel for ext2\n");
+		break;
+	}
+
+	used_dma_channels[dmanr] = 1;
+	used_dma_channels_users[dmanr] = device_id;
+	REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl);
+	REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
+	spin_unlock_irqrestore(&dma_lock,flags);
+	return 0;
+}
+
+void crisv32_free_dma(unsigned int dmanr)
+{
+	spin_lock(&dma_lock);
+	used_dma_channels[dmanr] = 0;
+	spin_unlock(&dma_lock);
+}

arch/cris/arch-v32/kernel/entry.S

@@ -0,0 +1,820 @@
+/*
+ *  Copyright (C) 2000-2003 Axis Communications AB
+ *
+ *  Authors:	Bjorn Wesen (bjornw@axis.com)
+ *              Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
+ *
+ * Code for the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace.c and ptrace.h
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/arch/offset.h>
+
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/intr_vect_defs_asm.h>
+
+	;; Exported functions.
+	.globl system_call
+	.globl ret_from_intr
+	.globl ret_from_fork
+	.globl resume
+	.globl multiple_interrupt
+	.globl nmi_interrupt
+	.globl spurious_interrupt
+	.globl do_sigtrap
+	.globl gdb_handle_exception
+	.globl sys_call_table
+
+	; Check if preemptive kernel scheduling should be done.
+#ifdef CONFIG_PREEMPT
+_resume_kernel:
+	di
+	; Load current task struct.
+	movs.w	-8192, $r0		; THREAD_SIZE = 8192
+	and.d	$sp, $r0
+
+	addoq	+TI_preempt_count, $r0, $acr
+	move.d	[$acr], $r10		; Preemption disabled?
+	bne	_Rexit
+	nop
+
+_need_resched:
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r10
+	btstq	TIF_NEED_RESCHED, $r10	; Check if need_resched is set.
+	bpl	_Rexit
+	nop
+
+	; Do preemptive kernel scheduling.
+	jsr	preempt_schedule_irq
+	nop
+
+	; Load new task struct.
+	movs.w	-8192, $r0		; THREAD_SIZE = 8192.
+	and.d	$sp, $r0
+
+	; One more time with new task.
+	ba	_need_resched
+	nop
+#else
+#define _resume_kernel _Rexit
+#endif
+
+	; Called at exit from fork. schedule_tail must be called to drop
+	; spinlock if CONFIG_PREEMPT.
+ret_from_fork:
+	jsr schedule_tail
+	nop
+	ba  ret_from_sys_call
+	nop
+
+ret_from_intr:
+	;; Check for resched if preemptive kernel, or if we're going back to
+	;; user-mode. This test matches the user_regs(regs) macro. Don't simply
+	;; test CCS since that doesn't necessarily reflect what mode we'll
+	;; return into.
+	addoq	+PT_ccs, $sp, $acr
+	move.d	[$acr], $r0
+	btstq	16, $r0			; User-mode flag.
+	bpl	_resume_kernel
+
+	; Note that di below is in delay slot.
+
+_resume_userspace:
+	di			; So need_resched and sigpending don't change.
+
+	movs.w	-8192, $r0		; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	addoq	+TI_flags, $r0, $acr	; current->work
+	move.d	[$acr], $r10
+	and.d	_TIF_WORK_MASK, $r10	; Work to be done on return?
+	bne	_work_pending
+	nop
+	ba	_Rexit
+	nop
+
+	;; The system_call is called by a BREAK instruction, which looks pretty
+	;; much like any other exception.
+	;;
+	;; System calls can't be made from interrupts but we still stack ERP
+	;; to have a complete stack frame.
+	;;
+	;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,
+	;; r13,mof,srp
+	;;
+	;; This function looks on the _surface_ like spaghetti programming, but it's
+	;; really designed so that the fast-path does not force cache-loading of
+	;; non-used instructions. Only the non-common cases cause the outlined code
+	;; to run..
+
+system_call:
+	;; Stack-frame similar to the irq heads, which is reversed in
+	;; ret_from_sys_call.
+	subq	12, $sp		; Skip EXS, EDA.
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	ei			; Allow IRQs while handling system call
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp	; Make room for R0-R13.
+	movem	$r13, [$sp]	; Push R0-R13
+	subq	4, $sp
+	move.d	$r10, [$sp]	; Push orig_r10.
+
+; Set S-bit when kernel debugging to keep hardware breakpoints active.
+#ifdef CONFIG_ETRAX_KGDB
+	move $ccs, $r0
+	or.d (1<<9), $r0
+	move $r0, $ccs
+#endif
+
+	movs.w	-ENOSYS, $r0
+	addoq	+PT_r10, $sp, $acr
+	move.d	$r0, [$acr]
+
+	;; Check if this process is syscall-traced.
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r0
+	btstq	TIF_SYSCALL_TRACE, $r0
+	bmi	_syscall_trace_entry
+	nop
+
+_syscall_traced:
+	;; Check for sanity in the requested syscall number.
+	cmpu.w	NR_syscalls, $r9
+	bhs	ret_from_sys_call
+	lslq	2, $r9		;  Multiply by 4, in the delay slot.
+
+	;; The location on the stack for the register structure is passed as a
+	;; seventh argument. Some system calls need this.
+	move.d  $sp, $r0
+	subq	4, $sp
+	move.d	$r0, [$sp]
+
+	;; The registers carrying parameters (R10-R13) are intact. The optional
+	;; fifth and sixth parameters is in MOF and SRP respectivly. Put them
+	;; back on the stack.
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+
+	;; Actually to the system call.
+	addo.d	+sys_call_table, $r9, $acr
+	move.d	[$acr], $acr
+	jsr	$acr
+	nop
+
+	addq	3*4, $sp		; Pop the mof, srp and regs parameters.
+	addoq	+PT_r10, $sp, $acr
+	move.d	$r10, [$acr]		; Save the return value.
+
+	moveq	1, $r9			; "Parameter" to ret_from_sys_call to
+					; show it was a sys call.
+
+	;; Fall through into ret_from_sys_call to return.
+
+ret_from_sys_call:
+	;; R9 is a parameter:
+	;;  >= 1 from syscall
+	;;     0 from irq
+
+	;; Get the current task-struct pointer.
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	di		; Make sure need_resched and sigpending don't change.
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r1
+	and.d	_TIF_ALLWORK_MASK, $r1
+	bne	_syscall_exit_work
+	nop
+
+_Rexit:
+	;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
+	;; and ptregs.h.
+	addq	4, $sp		; Skip orig_r10.
+	movem	[$sp+], $r13	; Registers R0-R13.
+	move.d	[$sp+], $acr
+	move	[$sp], $srs
+	addq	4, $sp
+	move	[$sp+], $mof
+	move	[$sp+], $spc
+	move	[$sp+], $ccs
+	move	[$sp+], $srp
+	move	[$sp+], $erp
+	addq    8, $sp		; Skip EXS, EDA.
+	jump	$erp
+	rfe			; Restore condition code stack in delay-slot.
+
+	;; We get here after doing a syscall if extra work might need to be done
+	;; perform syscall exit tracing if needed.
+
+_syscall_exit_work:
+	;; R0 contains current at this point and irq's are disabled.
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r1
+	btstq	TIF_SYSCALL_TRACE, $r1
+	bpl	_work_pending
+	nop
+	ei
+	move.d	$r9, $r1		; Preserve R9.
+	jsr	do_syscall_trace
+	nop
+	move.d	$r1, $r9
+	ba	_resume_userspace
+	nop
+
+_work_pending:
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r10
+	btstq	TIF_NEED_RESCHED, $r10	; Need resched?
+	bpl	_work_notifysig		; No, must be signal/notify.
+	nop
+
+_work_resched:
+	move.d	$r9, $r1		; Preserve R9.
+	jsr	schedule
+	nop
+	move.d	$r1, $r9
+	di
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r1
+	and.d	_TIF_WORK_MASK, $r1	; Ignore sycall trace counter.
+	beq	_Rexit
+	nop
+	btstq	TIF_NEED_RESCHED, $r1
+	bmi	_work_resched		; current->work.need_resched.
+	nop
+
+_work_notifysig:
+	;; Deal with pending signals and notify-resume requests.
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r13		; The thread_info_flags parameter.
+	move.d	$r9, $r10		; do_notify_resume syscall/irq param.
+	moveq	0, $r11			; oldset param - 0 in this case.
+	move.d	$sp, $r12		; The regs param.
+	jsr	do_notify_resume
+	nop
+
+	ba _Rexit
+	nop
+
+	;; We get here as a sidetrack when we've entered a syscall with the
+	;; trace-bit set. We need to call do_syscall_trace and then continue
+	;; with the call.
+
+_syscall_trace_entry:
+	;; PT_r10 in the frame contains -ENOSYS as required, at this point.
+
+	jsr	do_syscall_trace
+	nop
+
+	;; Now re-enter the syscall code to do the syscall itself. We need to
+	;; restore R9 here to contain the wanted syscall, and the other
+	;; parameter-bearing registers.
+	addoq	+PT_r9, $sp, $acr
+	move.d	[$acr], $r9
+	addoq	+PT_orig_r10, $sp, $acr
+	move.d	[$acr], $r10		; PT_r10 is already -ENOSYS.
+	addoq	+PT_r11, $sp, $acr
+	move.d	[$acr], $r11
+	addoq	+PT_r12, $sp, $acr
+	move.d	[$acr], $r12
+	addoq	+PT_r13, $sp, $acr
+	move.d	[$acr], $r13
+	addoq	+PT_mof, $sp, $acr
+	move	[$acr], $mof
+	addoq	+PT_srp, $sp, $acr
+	move	[$acr], $srp
+
+	ba	_syscall_traced
+	nop
+
+	;; Resume performs the actual task-switching, by switching stack
+	;; pointers. Input arguments are:
+	;;
+	;; R10 = prev
+	;; R11 = next
+	;; R12 = thread offset in task struct.
+	;;
+	;; Returns old current in R10.
+
+resume:
+	subq	4, $sp
+	move	$srp, [$sp]		; Keep old/new PC on the stack.
+	add.d	$r12, $r10		; R10 = current tasks tss.
+	addoq	+THREAD_ccs, $r10, $acr
+	move	$ccs, [$acr]		; Save IRQ enable state.
+	di
+
+	addoq	+THREAD_usp, $r10, $acr
+	move	$usp, [$acr]		; Save user-mode stackpointer.
+
+	;; See copy_thread for the reason why register R9 is saved.
+	subq	10*4, $sp
+	movem	$r9, [$sp]		; Save non-scratch registers and R9.
+
+	addoq	+THREAD_ksp, $r10, $acr
+	move.d	$sp, [$acr]		; Save kernel SP for old task.
+
+	move.d	$sp, $r10		; Return last running task in R10.
+	and.d   -8192, $r10		; Get thread_info from stackpointer.
+	addoq	+TI_task, $r10, $acr
+	move.d	[$acr], $r10		; Get task.
+	add.d	$r12, $r11		; Find the new tasks tss.
+	addoq	+THREAD_ksp, $r11, $acr
+	move.d	[$acr], $sp		; Switch to new stackframe.
+	movem	[$sp+], $r9		; Restore non-scratch registers and R9.
+
+	addoq	+THREAD_usp, $r11, $acr
+	move	[$acr], $usp		; Restore user-mode stackpointer.
+
+	addoq	+THREAD_ccs, $r11, $acr
+	move	[$acr], $ccs		; Restore IRQ enable status.
+	move.d	[$sp+], $acr
+	jump	$acr			; Restore PC.
+	nop
+
+nmi_interrupt:
+
+;; If we receive a watchdog interrupt while it is not expected, then set
+;; up a canonical frame and dump register contents before dying.
+
+	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
+	subq	12, $sp		;  Skip EXS, EDA.
+	move	$nrp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp		; Make room for R0-R13.
+	movem	$r13, [$sp]		; Push R0-R13.
+	subq	4, $sp
+	move.d	$r10, [$sp]		; Push orig_r10.
+	move.d  REG_ADDR(intr_vect, regi_irq, r_nmi), $r0
+	move.d  [$r0], $r0
+	btstq	REG_BIT(intr_vect, r_nmi, watchdog), $r0
+	bpl     1f
+	nop
+	jsr 	handle_watchdog_bite	; In time.c.
+        move.d	$sp, $r10		; Pointer to registers
+1:	btstq	REG_BIT(intr_vect, r_nmi, ext), $r0
+	bpl     1f
+	nop
+	jsr	handle_nmi
+	move.d	$sp, $r10		; Pointer to registers
+1:	addq    4, $sp			; Skip orig_r10
+	movem   [$sp+], $r13
+	move.d  [$sp+], $acr
+	move    [$sp], $srs
+	addq    4, $sp
+	move    [$sp+], $mof
+	move    [$sp+], $spc
+	move    [$sp+], $ccs
+	move	[$sp+], $srp
+	move	[$sp+], $nrp
+	addq    8, $sp			; Skip EXS, EDA.
+	jump    $nrp
+	rfn
+
+	.comm	cause_of_death, 4	;; Don't declare this anywhere.
+
+spurious_interrupt:
+	di
+	jump hard_reset_now
+	nop
+
+	;; This handles the case when multiple interrupts arrive at the same
+	;; time. Jump to the first set interrupt bit in a priotiry fashion. The
+	;; hardware will call the unserved interrupts after the handler
+	;; finishes.
+multiple_interrupt:
+	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
+	subq	12, $sp		; Skip EXS, EDA.
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp	; Make room for R0-R13.
+	movem	$r13, [$sp]	; Push R0-R13.
+	subq	4, $sp
+	move.d	$r10, [$sp]	; Push orig_r10.
+
+; Set S-bit when kernel debugging to keep hardware breakpoints active.
+#ifdef CONFIG_ETRAX_KGDB
+	move $ccs, $r0
+	or.d (1<<9), $r0
+	move $r0, $ccs
+#endif
+
+	jsr	crisv32_do_multiple
+	move.d	$sp, $r10
+	jump    ret_from_intr
+	nop
+
+do_sigtrap:
+	;; Sigtraps the process that executed the BREAK instruction. Creates a
+	;; frame that Rexit expects.
+	subq	4, $sp
+	move    $eda, [$sp]
+	subq    4, $sp
+	move    $exs, [$sp]
+	subq    4, $sp
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	di				; Need to disable irq's at this point.
+	subq	14*4, $sp		; Make room for r0-r13.
+	movem	$r13, [$sp]		; Push the r0-r13 registers.
+	subq	4, $sp
+	move.d	$r10, [$sp]		; Push orig_r10.
+
+	movs.w	-8192, $r9		; THREAD_SIZE == 8192
+	and.d	$sp, $r9
+
+	;; thread_info as first parameter
+	move.d  $r9, $r10
+	moveq	5, $r11			; SIGTRAP as second argument.
+	jsr	ugdb_trap_user
+	nop
+	jump	ret_from_intr		; Use the return routine for interrupts.
+	nop
+
+gdb_handle_exception:
+	subq	4, $sp
+	move.d	$r0, [$sp]
+#ifdef CONFIG_ETRAX_KGDB
+	move	$ccs, $r0		; U-flag not affected by previous insns.
+	btstq	16, $r0			; Test the U-flag.
+	bmi	_ugdb_handle_exception	; Go to user mode debugging.
+	nop				; Empty delay-slot (cannot pop R0 here).
+	ba	kgdb_handle_exception	; Go to kernel debugging.
+	move.d	[$sp+], $r0		; Restore R0 in delay slot.
+#endif
+
+_ugdb_handle_exception:
+	ba	do_sigtrap		; SIGTRAP the offending process.
+	move.d	[$sp+], $r0		; Restore R0 in delay slot.
+
+	.data
+
+	.section .rodata,"a"
+sys_call_table:
+	.long sys_restart_syscall	; 0 - old "setup()" system call, used
+					; for restarting.
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink	/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid	/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35  old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount	/* recycled never used phys( */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall	/* old sys_olduname holder */
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp	/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long sys_select	/* was old_select in Linux/E100 */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink	/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long old_readdir
+	.long old_mmap		/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16	/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs	/* 100 */
+	.long sys_ni_syscall	/* sys_ioperm in i386 */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_ni_syscall	/* old sys_uname holder */
+	.long sys_ni_syscall	/* sys_iopl in i386 */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* old "idle" system call */
+	.long sys_ni_syscall	/* vm86old in i386 */
+	.long sys_wait4
+	.long sys_swapoff	/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_adjtimex
+	.long sys_mprotect	/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* 130:	old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek	/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam	/* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min	/* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_ni_syscall	/* sys_vm86 */
+	.long sys_ni_syscall	/* Old sys_query_module */
+	.long sys_poll
+	.long sys_nfsservctl
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64	/* 180 */
+	.long sys_pwrite64
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset	/* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* streams1 */
+	.long sys_ni_syscall	/* streams2 */
+	.long sys_vfork		/* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64	/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid	/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid	/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall	/* sys_set_thread_area */
+	.long sys_ni_syscall	/* sys_get_thread_area */
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill	/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64
+	.long sys_ni_syscall	/* sys_vserver */
+	.long sys_ni_syscall	/* sys_mbind */
+	.long sys_ni_syscall	/* 275 sys_get_mempolicy */
+	.long sys_ni_syscall	/* sys_set_mempolicy */
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive	/* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_ni_syscall		/* reserved for kexec */
+	.long sys_waitid
+
+        /*
+         * NOTE!! This doesn't have to be exact - we just have
+         * to make sure we have _enough_ of the "sys_ni_syscall"
+         * entries. Don't panic if you notice that this hasn't
+         * been shrunk every time we add a new system call.
+         */
+
+	.rept NR_syscalls - (.-sys_call_table) / 4
+		.long sys_ni_syscall
+	.endr
+

arch/cris/arch-v32/kernel/fasttimer.c

@@ -0,0 +1,996 @@
+/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $
+ * linux/arch/cris/kernel/fasttimer.c
+ *
+ * Fast timers for ETRAX FS
+ * This may be useful in other OS than Linux so use 2 space indentation...
+ *
+ * $Log: fasttimer.c,v $
+ * Revision 1.11  2005/01/04 11:15:46  starvik
+ * Don't share timer IRQ.
+ *
+ * Revision 1.10  2004/12/07 09:19:38  starvik
+ * Corrected includes.
+ * Use correct interrupt macros.
+ *
+ * Revision 1.9  2004/05/14 10:18:58  starvik
+ * Export fast_timer_list
+ *
+ * Revision 1.8  2004/05/14 07:58:03  starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.7  2003/07/10 12:06:14  starvik
+ * Return IRQ_NONE if irq wasn't handled
+ *
+ * Revision 1.6  2003/07/04 08:27:49  starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.5  2003/06/05 10:16:22  johana
+ * New INTR_VECT macros.
+ *
+ * Revision 1.4  2003/06/03 08:49:45  johana
+ * Fixed typo.
+ *
+ * Revision 1.3  2003/06/02 12:51:27  johana
+ * Now compiles.
+ * Commented some include files that probably can be removed.
+ *
+ * Revision 1.2  2003/06/02 12:09:41  johana
+ * Ported to ETRAX FS using the trig interrupt instead of timer1.
+ *
+ * Revision 1.3  2002/12/12 08:26:32  starvik
+ * Don't use C-comments inside CVS comments
+ *
+ * Revision 1.2  2002/12/11 15:42:02  starvik
+ * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
+ *
+ * Revision 1.1  2002/11/18 07:58:06  starvik
+ * Fast timers (from Linux 2.4)
+ *
+ * Revision 1.5  2002/10/15 06:21:39  starvik
+ * Added call to init_waitqueue_head
+ *
+ * Revision 1.4  2002/05/28 17:47:59  johana
+ * Added del_fast_timer()
+ *
+ * Revision 1.3  2002/05/28 16:16:07  johana
+ * Handle empty fast_timer_list
+ *
+ * Revision 1.2  2002/05/27 15:38:42  johana
+ * Made it compile without warnings on Linux 2.4.
+ * (includes, wait_queue, PROC_FS and snprintf)
+ *
+ * Revision 1.1  2002/05/27 15:32:25  johana
+ * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
+ *
+ * Revision 1.8  2001/11/27 13:50:40  pkj
+ * Disable interrupts while stopping the timer and while modifying the
+ * list of active timers in timer1_handler() as it may be interrupted
+ * by other interrupts (e.g., the serial interrupt) which may add fast
+ * timers.
+ *
+ * Revision 1.7  2001/11/22 11:50:32  pkj
+ * * Only store information about the last 16 timers.
+ * * proc_fasttimer_read() now uses an allocated buffer, since it
+ *   requires more space than just a page even for only writing the
+ *   last 16 timers. The buffer is only allocated on request, so
+ *   unless /proc/fasttimer is read, it is never allocated.
+ * * Renamed fast_timer_started to fast_timers_started to match
+ *   fast_timers_added and fast_timers_expired.
+ * * Some clean-up.
+ *
+ * Revision 1.6  2000/12/13 14:02:08  johana
+ * Removed volatile for fast_timer_list
+ *
+ * Revision 1.5  2000/12/13 13:55:35  johana
+ * Added DEBUG_LOG, added som cli() and cleanup
+ *
+ * Revision 1.4  2000/12/05 13:48:50  johana
+ * Added range check when writing proc file, modified timer int handling
+ *
+ * Revision 1.3  2000/11/23 10:10:20  johana
+ * More debug/logging possibilities.
+ * Moved GET_JIFFIES_USEC() to timex.h and time.c
+ *
+ * Revision 1.2  2000/11/01 13:41:04  johana
+ * Clean up and bugfixes.
+ * Created new do_gettimeofday_fast() that gets a timeval struct
+ * with time based on jiffies and *R_TIMER0_DATA, uses a table
+ * for fast conversion of timer value to microseconds.
+ * (Much faster the standard do_gettimeofday() and we don't really
+ * wan't to use the true time - we wan't the "uptime" so timers don't screw up
+ * when we change the time.
+ * TODO: Add efficient support for continuous timers as well.
+ *
+ * Revision 1.1  2000/10/26 15:49:16  johana
+ * Added fasttimer, highresolution timers.
+ *
+ * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <linux/config.h>
+#include <linux/version.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/fasttimer.h>
+#include <linux/proc_fs.h>
+
+/*
+ * timer0 is running at 100MHz and generating jiffies timer ticks
+ * at 100 or 1000 HZ.
+ * fasttimer gives an API that gives timers that expire "between" the jiffies
+ * giving microsecond resolution (10 ns).
+ * fasttimer uses reg_timer_rw_trig register to get interrupt when
+ * r_time reaches a certain value.
+ */
+
+
+#define DEBUG_LOG_INCLUDED
+#define FAST_TIMER_LOG
+//#define FAST_TIMER_TEST
+
+#define FAST_TIMER_SANITY_CHECKS
+
+#ifdef FAST_TIMER_SANITY_CHECKS
+#define SANITYCHECK(x) x
+static int sanity_failed = 0;
+#else
+#define SANITYCHECK(x)
+#endif
+
+#define D1(x)
+#define D2(x)
+#define DP(x)
+
+#define __INLINE__ inline
+
+static int fast_timer_running = 0;
+static int fast_timers_added = 0;
+static int fast_timers_started = 0;
+static int fast_timers_expired = 0;
+static int fast_timers_deleted = 0;
+static int fast_timer_is_init = 0;
+static int fast_timer_ints = 0;
+
+struct fast_timer *fast_timer_list = NULL;
+
+#ifdef DEBUG_LOG_INCLUDED
+#define DEBUG_LOG_MAX 128
+static const char * debug_log_string[DEBUG_LOG_MAX];
+static unsigned long debug_log_value[DEBUG_LOG_MAX];
+static int debug_log_cnt = 0;
+static int debug_log_cnt_wrapped = 0;
+
+#define DEBUG_LOG(string, value) \
+{ \
+  unsigned long log_flags; \
+  local_irq_save(log_flags); \
+  debug_log_string[debug_log_cnt] = (string); \
+  debug_log_value[debug_log_cnt] = (unsigned long)(value); \
+  if (++debug_log_cnt >= DEBUG_LOG_MAX) \
+  { \
+    debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
+    debug_log_cnt_wrapped = 1; \
+  } \
+  local_irq_restore(log_flags); \
+}
+#else
+#define DEBUG_LOG(string, value)
+#endif
+
+
+#define NUM_TIMER_STATS 16
+#ifdef FAST_TIMER_LOG
+struct fast_timer timer_added_log[NUM_TIMER_STATS];
+struct fast_timer timer_started_log[NUM_TIMER_STATS];
+struct fast_timer timer_expired_log[NUM_TIMER_STATS];
+#endif
+
+int timer_div_settings[NUM_TIMER_STATS];
+int timer_delay_settings[NUM_TIMER_STATS];
+
+
+static void
+timer_trig_handler(void);
+
+
+
+/* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
+void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
+{
+  unsigned long sec = jiffies;
+  unsigned long usec = GET_JIFFIES_USEC();
+
+  usec += (sec % HZ) * (1000000 / HZ);
+  sec = sec / HZ;
+
+  if (usec > 1000000)
+  {
+    usec -= 1000000;
+    sec++;
+  }
+  tv->tv_sec = sec;
+  tv->tv_usec = usec;
+}
+
+int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
+{
+  if (t0->tv_sec < t1->tv_sec)
+  {
+    return -1;
+  }
+  else if (t0->tv_sec > t1->tv_sec)
+  {
+    return 1;
+  }
+  if (t0->tv_usec < t1->tv_usec)
+  {
+    return -1;
+  }
+  else if (t0->tv_usec > t1->tv_usec)
+  {
+    return 1;
+  }
+  return 0;
+}
+
+/* Called with ints off */
+void __INLINE__ start_timer_trig(unsigned long delay_us)
+{
+  reg_timer_rw_ack_intr ack_intr = { 0 };
+  reg_timer_rw_intr_mask intr_mask;
+  reg_timer_rw_trig trig;
+  reg_timer_rw_trig_cfg trig_cfg = { 0 };
+  reg_timer_r_time r_time;
+
+  r_time = REG_RD(timer, regi_timer, r_time);
+
+  D1(printk("start_timer_trig : %d us freq: %i div: %i\n",
+            delay_us, freq_index, div));
+  /* Clear trig irq */
+  intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
+  intr_mask.trig = 0;
+  REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
+
+  /* Set timer values */
+  /* r_time is 100MHz (10 ns resolution) */
+  trig = r_time + delay_us*(1000/10);
+
+  timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig;
+  timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
+
+  /* Ack interrupt */
+  ack_intr.trig = 1;
+  REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
+
+  /* Start timer */
+  REG_WR(timer, regi_timer, rw_trig, trig);
+  trig_cfg.tmr = regk_timer_time;
+  REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
+
+  /* Check if we have already passed the trig time */
+  r_time = REG_RD(timer, regi_timer, r_time);
+  if (r_time < trig) {
+    /* No, Enable trig irq */
+    intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
+    intr_mask.trig = 1;
+    REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
+    fast_timers_started++;
+    fast_timer_running = 1;
+  }
+  else
+  {
+    /* We have passed the time, disable trig point, ack intr */
+    trig_cfg.tmr = regk_timer_off;
+    REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
+    REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
+    /* call the int routine directly */
+    timer_trig_handler();
+  }
+
+}
+
+/* In version 1.4 this function takes 27 - 50 us */
+void start_one_shot_timer(struct fast_timer *t,
+                          fast_timer_function_type *function,
+                          unsigned long data,
+                          unsigned long delay_us,
+                          const char *name)
+{
+  unsigned long flags;
+  struct fast_timer *tmp;
+
+  D1(printk("sft %s %d us\n", name, delay_us));
+
+  local_irq_save(flags);
+
+  do_gettimeofday_fast(&t->tv_set);
+  tmp = fast_timer_list;
+
+  SANITYCHECK({ /* Check so this is not in the list already... */
+    while (tmp != NULL)
+    {
+      if (tmp == t)
+      {
+        printk("timer name: %s data: 0x%08lX already in list!\n", name, data);
+        sanity_failed++;
+        return;
+      }
+      else
+      {
+        tmp = tmp->next;
+      }
+    }
+    tmp = fast_timer_list;
+  });
+
+  t->delay_us = delay_us;
+  t->function = function;
+  t->data = data;
+  t->name = name;
+
+  t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
+  t->tv_expires.tv_sec  = t->tv_set.tv_sec  + delay_us / 1000000;
+  if (t->tv_expires.tv_usec > 1000000)
+  {
+    t->tv_expires.tv_usec -= 1000000;
+    t->tv_expires.tv_sec++;
+  }
+#ifdef FAST_TIMER_LOG
+  timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
+#endif
+  fast_timers_added++;
+
+  /* Check if this should timeout before anything else */
+  if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
+  {
+    /* Put first in list and modify the timer value */
+    t->prev = NULL;
+    t->next = fast_timer_list;
+    if (fast_timer_list)
+    {
+      fast_timer_list->prev = t;
+    }
+    fast_timer_list = t;
+#ifdef FAST_TIMER_LOG
+    timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+    start_timer_trig(delay_us);
+  } else {
+    /* Put in correct place in list */
+    while (tmp->next &&
+           timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0)
+    {
+      tmp = tmp->next;
+    }
+    /* Insert t after tmp */
+    t->prev = tmp;
+    t->next = tmp->next;
+    if (tmp->next)
+    {
+      tmp->next->prev = t;
+    }
+    tmp->next = t;
+  }
+
+  D2(printk("start_one_shot_timer: %d us done\n", delay_us));
+
+  local_irq_restore(flags);
+} /* start_one_shot_timer */
+
+static inline int fast_timer_pending (const struct fast_timer * t)
+{
+  return (t->next != NULL) || (t->prev != NULL) || (t == fast_timer_list);
+}
+
+static inline int detach_fast_timer (struct fast_timer *t)
+{
+  struct fast_timer *next, *prev;
+  if (!fast_timer_pending(t))
+    return 0;
+  next = t->next;
+  prev = t->prev;
+  if (next)
+    next->prev = prev;
+  if (prev)
+    prev->next = next;
+  else
+    fast_timer_list = next;
+  fast_timers_deleted++;
+  return 1;
+}
+
+int del_fast_timer(struct fast_timer * t)
+{
+  unsigned long flags;
+  int ret;
+
+  local_irq_save(flags);
+  ret = detach_fast_timer(t);
+  t->next = t->prev = NULL;
+  local_irq_restore(flags);
+  return ret;
+} /* del_fast_timer */
+
+
+/* Interrupt routines or functions called in interrupt context */
+
+/* Timer interrupt handler for trig interrupts */
+
+static irqreturn_t
+timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+  reg_timer_r_masked_intr masked_intr;
+
+  /* Check if the timer interrupt is for us (a trig int) */
+  masked_intr = REG_RD(timer, regi_timer, r_masked_intr);
+  if (!masked_intr.trig)
+    return IRQ_NONE;
+  timer_trig_handler();
+  return IRQ_HANDLED;
+}
+
+static void timer_trig_handler(void)
+{
+  reg_timer_rw_ack_intr ack_intr = { 0 };
+  reg_timer_rw_intr_mask intr_mask;
+  reg_timer_rw_trig_cfg trig_cfg = { 0 };
+  struct fast_timer *t;
+  unsigned long flags;
+
+  local_irq_save(flags);
+
+  /* Clear timer trig interrupt */
+  intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
+  intr_mask.trig = 0;
+  REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
+
+  /* First stop timer, then ack interrupt */
+  /* Stop timer */
+  trig_cfg.tmr = regk_timer_off;
+  REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
+
+  /* Ack interrupt */
+  ack_intr.trig = 1;
+  REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
+
+  fast_timer_running = 0;
+  fast_timer_ints++;
+
+  local_irq_restore(flags);
+
+  t = fast_timer_list;
+  while (t)
+  {
+    struct timeval tv;
+
+    /* Has it really expired? */
+    do_gettimeofday_fast(&tv);
+    D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
+
+    if (timeval_cmp(&t->tv_expires, &tv) <= 0)
+    {
+      /* Yes it has expired */
+#ifdef FAST_TIMER_LOG
+      timer_expired_log[fast_timers_expired % NUM_TIMER_STATS] = *t;
+#endif
+      fast_timers_expired++;
+
+      /* Remove this timer before call, since it may reuse the timer */
+      local_irq_save(flags);
+      if (t->prev)
+      {
+        t->prev->next = t->next;
+      }
+      else
+      {
+        fast_timer_list = t->next;
+      }
+      if (t->next)
+      {
+        t->next->prev = t->prev;
+      }
+      t->prev = NULL;
+      t->next = NULL;
+      local_irq_restore(flags);
+
+      if (t->function != NULL)
+      {
+        t->function(t->data);
+      }
+      else
+      {
+        DEBUG_LOG("!trimertrig %i function==NULL!\n", fast_timer_ints);
+      }
+    }
+    else
+    {
+      /* Timer is to early, let's set it again using the normal routines */
+      D1(printk(".\n"));
+    }
+
+    local_irq_save(flags);
+    if ((t = fast_timer_list) != NULL)
+    {
+      /* Start next timer.. */
+      long us;
+      struct timeval tv;
+
+      do_gettimeofday_fast(&tv);
+      us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
+            t->tv_expires.tv_usec - tv.tv_usec);
+      if (us > 0)
+      {
+        if (!fast_timer_running)
+        {
+#ifdef FAST_TIMER_LOG
+          timer_started_log[fast_timers_started % NUM_TIMER_STATS] = *t;
+#endif
+          start_timer_trig(us);
+        }
+        local_irq_restore(flags);
+        break;
+      }
+      else
+      {
+        /* Timer already expired, let's handle it better late than never.
+         * The normal loop handles it
+         */
+        D1(printk("e! %d\n", us));
+      }
+    }
+    local_irq_restore(flags);
+  }
+
+  if (!t)
+  {
+    D1(printk("ttrig stop!\n"));
+  }
+}
+
+static void wake_up_func(unsigned long data)
+{
+#ifdef DECLARE_WAITQUEUE
+  wait_queue_head_t  *sleep_wait_p = (wait_queue_head_t*)data;
+#else
+  struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
+#endif
+  wake_up(sleep_wait_p);
+}
+
+
+/* Useful API */
+
+void schedule_usleep(unsigned long us)
+{
+  struct fast_timer t;
+#ifdef DECLARE_WAITQUEUE
+  wait_queue_head_t sleep_wait;
+  init_waitqueue_head(&sleep_wait);
+  {
+  DECLARE_WAITQUEUE(wait, current);
+#else
+  struct wait_queue *sleep_wait = NULL;
+  struct wait_queue wait = { current, NULL };
+#endif
+
+  D1(printk("schedule_usleep(%d)\n", us));
+  add_wait_queue(&sleep_wait, &wait);
+  set_current_state(TASK_INTERRUPTIBLE);
+  start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
+                       "usleep");
+  schedule();
+  set_current_state(TASK_RUNNING);
+  remove_wait_queue(&sleep_wait, &wait);
+  D1(printk("done schedule_usleep(%d)\n", us));
+#ifdef DECLARE_WAITQUEUE
+  }
+#endif
+}
+
+#ifdef CONFIG_PROC_FS
+static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+                       ,int *eof, void *data_unused
+#else
+                        ,int unused
+#endif
+                               );
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+static struct proc_dir_entry *fasttimer_proc_entry;
+#else
+static struct proc_dir_entry fasttimer_proc_entry =
+{
+  0, 9, "fasttimer",
+  S_IFREG | S_IRUGO, 1, 0, 0,
+  0, NULL /* ops -- default to array */,
+  &proc_fasttimer_read /* get_info */,
+};
+#endif
+#endif /* CONFIG_PROC_FS */
+
+#ifdef CONFIG_PROC_FS
+
+/* This value is very much based on testing */
+#define BIG_BUF_SIZE (500 + NUM_TIMER_STATS * 300)
+
+static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+                       ,int *eof, void *data_unused
+#else
+                        ,int unused
+#endif
+                               )
+{
+  unsigned long flags;
+  int i = 0;
+  int num_to_show;
+  struct timeval tv;
+  struct fast_timer *t, *nextt;
+  static char *bigbuf = NULL;
+  static unsigned long used;
+
+  if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
+  {
+    used = 0;
+    bigbuf[0] = '\0';
+    return 0;
+  }
+
+  if (!offset || !used)
+  {
+    do_gettimeofday_fast(&tv);
+
+    used = 0;
+    used += sprintf(bigbuf + used, "Fast timers added:     %i\n",
+                    fast_timers_added);
+    used += sprintf(bigbuf + used, "Fast timers started:   %i\n",
+                    fast_timers_started);
+    used += sprintf(bigbuf + used, "Fast timer interrupts: %i\n",
+                    fast_timer_ints);
+    used += sprintf(bigbuf + used, "Fast timers expired:   %i\n",
+                    fast_timers_expired);
+    used += sprintf(bigbuf + used, "Fast timers deleted:   %i\n",
+                    fast_timers_deleted);
+    used += sprintf(bigbuf + used, "Fast timer running:    %s\n",
+                    fast_timer_running ? "yes" : "no");
+    used += sprintf(bigbuf + used, "Current time:          %lu.%06lu\n",
+                    (unsigned long)tv.tv_sec,
+                    (unsigned long)tv.tv_usec);
+#ifdef FAST_TIMER_SANITY_CHECKS
+    used += sprintf(bigbuf + used, "Sanity failed:         %i\n",
+                    sanity_failed);
+#endif
+    used += sprintf(bigbuf + used, "\n");
+
+#ifdef DEBUG_LOG_INCLUDED
+    {
+      int end_i = debug_log_cnt;
+      i = 0;
+
+      if (debug_log_cnt_wrapped)
+      {
+        i = debug_log_cnt;
+      }
+
+      while ((i != end_i || (debug_log_cnt_wrapped && !used)) &&
+             used+100 < BIG_BUF_SIZE)
+      {
+        used += sprintf(bigbuf + used, debug_log_string[i],
+                        debug_log_value[i]);
+        i = (i+1) % DEBUG_LOG_MAX;
+      }
+    }
+    used += sprintf(bigbuf + used, "\n");
+#endif
+
+    num_to_show = (fast_timers_started < NUM_TIMER_STATS ? fast_timers_started:
+                   NUM_TIMER_STATS);
+    used += sprintf(bigbuf + used, "Timers started: %i\n", fast_timers_started);
+    for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE) ; i++)
+    {
+      int cur = (fast_timers_started - i - 1) % NUM_TIMER_STATS;
+
+#if 1 //ndef FAST_TIMER_LOG
+      used += sprintf(bigbuf + used, "div: %i delay: %i"
+                      "\n",
+                      timer_div_settings[cur],
+                      timer_delay_settings[cur]
+                      );
+#endif
+#ifdef FAST_TIMER_LOG
+      t = &timer_started_log[cur];
+      used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+                      "d: %6li us data: 0x%08lX"
+                      "\n",
+                      t->name,
+                      (unsigned long)t->tv_set.tv_sec,
+                      (unsigned long)t->tv_set.tv_usec,
+                      (unsigned long)t->tv_expires.tv_sec,
+                      (unsigned long)t->tv_expires.tv_usec,
+                      t->delay_us,
+                      t->data
+                      );
+#endif
+    }
+    used += sprintf(bigbuf + used, "\n");
+
+#ifdef FAST_TIMER_LOG
+    num_to_show = (fast_timers_added < NUM_TIMER_STATS ? fast_timers_added:
+                   NUM_TIMER_STATS);
+    used += sprintf(bigbuf + used, "Timers added: %i\n", fast_timers_added);
+    for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++)
+    {
+      t = &timer_added_log[(fast_timers_added - i - 1) % NUM_TIMER_STATS];
+      used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+                      "d: %6li us data: 0x%08lX"
+                      "\n",
+                      t->name,
+                      (unsigned long)t->tv_set.tv_sec,
+                      (unsigned long)t->tv_set.tv_usec,
+                      (unsigned long)t->tv_expires.tv_sec,
+                      (unsigned long)t->tv_expires.tv_usec,
+                      t->delay_us,
+                      t->data
+                      );
+    }
+    used += sprintf(bigbuf + used, "\n");
+
+    num_to_show = (fast_timers_expired < NUM_TIMER_STATS ? fast_timers_expired:
+                   NUM_TIMER_STATS);
+    used += sprintf(bigbuf + used, "Timers expired: %i\n", fast_timers_expired);
+    for (i = 0; i < num_to_show && (used+100 < BIG_BUF_SIZE); i++)
+    {
+      t = &timer_expired_log[(fast_timers_expired - i - 1) % NUM_TIMER_STATS];
+      used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+                      "d: %6li us data: 0x%08lX"
+                      "\n",
+                      t->name,
+                      (unsigned long)t->tv_set.tv_sec,
+                      (unsigned long)t->tv_set.tv_usec,
+                      (unsigned long)t->tv_expires.tv_sec,
+                      (unsigned long)t->tv_expires.tv_usec,
+                      t->delay_us,
+                      t->data
+                      );
+    }
+    used += sprintf(bigbuf + used, "\n");
+#endif
+
+    used += sprintf(bigbuf + used, "Active timers:\n");
+    local_irq_save(flags);
+    local_irq_save(flags);
+    t = fast_timer_list;
+    while (t != NULL && (used+100 < BIG_BUF_SIZE))
+    {
+      nextt = t->next;
+      local_irq_restore(flags);
+      used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
+                      "d: %6li us data: 0x%08lX"
+/*                      " func: 0x%08lX" */
+                      "\n",
+                      t->name,
+                      (unsigned long)t->tv_set.tv_sec,
+                      (unsigned long)t->tv_set.tv_usec,
+                      (unsigned long)t->tv_expires.tv_sec,
+                      (unsigned long)t->tv_expires.tv_usec,
+                      t->delay_us,
+                      t->data
+/*                      , t->function */
+                      );
+      local_irq_disable();
+      if (t->next != nextt)
+      {
+        printk("timer removed!\n");
+      }
+      t = nextt;
+    }
+    local_irq_restore(flags);
+  }
+
+  if (used - offset < len)
+  {
+    len = used - offset;
+  }
+
+  memcpy(buf, bigbuf + offset, len);
+  *start = buf;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+  *eof = 1;
+#endif
+
+  return len;
+}
+#endif /* PROC_FS */
+
+#ifdef FAST_TIMER_TEST
+static volatile unsigned long i = 0;
+static volatile int num_test_timeout = 0;
+static struct fast_timer tr[10];
+static int exp_num[10];
+
+static struct timeval tv_exp[100];
+
+static void test_timeout(unsigned long data)
+{
+  do_gettimeofday_fast(&tv_exp[data]);
+  exp_num[data] = num_test_timeout;
+
+  num_test_timeout++;
+}
+
+static void test_timeout1(unsigned long data)
+{
+  do_gettimeofday_fast(&tv_exp[data]);
+  exp_num[data] = num_test_timeout;
+  if (data < 7)
+  {
+    start_one_shot_timer(&tr[i], test_timeout1, i, 1000, "timeout1");
+    i++;
+  }
+  num_test_timeout++;
+}
+
+DP(
+static char buf0[2000];
+static char buf1[2000];
+static char buf2[2000];
+static char buf3[2000];
+static char buf4[2000];
+);
+
+static char buf5[6000];
+static int j_u[1000];
+
+static void fast_timer_test(void)
+{
+  int prev_num;
+  int j;
+
+  struct timeval tv, tv0, tv1, tv2;
+
+  printk("fast_timer_test() start\n");
+  do_gettimeofday_fast(&tv);
+
+  for (j = 0; j < 1000; j++)
+  {
+    j_u[j] = GET_JIFFIES_USEC();
+  }
+  for (j = 0; j < 100; j++)
+  {
+    do_gettimeofday_fast(&tv_exp[j]);
+  }
+  printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
+
+  for (j = 0; j < 1000; j++)
+  {
+    printk("%i %i %i %i %i\n",j_u[j], j_u[j+1], j_u[j+2], j_u[j+3], j_u[j+4]);
+    j += 4;
+  }
+  for (j = 0; j < 100; j++)
+  {
+    printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
+           tv_exp[j].tv_sec,tv_exp[j].tv_usec,
+           tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
+           tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
+           tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
+           tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
+    j += 4;
+  }
+  do_gettimeofday_fast(&tv0);
+  start_one_shot_timer(&tr[i], test_timeout, i, 50000, "test0");
+  DP(proc_fasttimer_read(buf0, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout, i, 70000, "test1");
+  DP(proc_fasttimer_read(buf1, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout, i, 40000, "test2");
+  DP(proc_fasttimer_read(buf2, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout, i, 60000, "test3");
+  DP(proc_fasttimer_read(buf3, NULL, 0, 0, 0));
+  i++;
+  start_one_shot_timer(&tr[i], test_timeout1, i, 55000, "test4xx");
+  DP(proc_fasttimer_read(buf4, NULL, 0, 0, 0));
+  i++;
+  do_gettimeofday_fast(&tv1);
+
+  proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+
+  prev_num = num_test_timeout;
+  while (num_test_timeout < i)
+  {
+    if (num_test_timeout != prev_num)
+    {
+      prev_num = num_test_timeout;
+    }
+  }
+  do_gettimeofday_fast(&tv2);
+  printk("Timers started    %is %06i\n", tv0.tv_sec, tv0.tv_usec);
+  printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
+  printk("Timers done       %is %06i\n", tv2.tv_sec, tv2.tv_usec);
+  DP(printk("buf0:\n");
+     printk(buf0);
+     printk("buf1:\n");
+     printk(buf1);
+     printk("buf2:\n");
+     printk(buf2);
+     printk("buf3:\n");
+     printk(buf3);
+     printk("buf4:\n");
+     printk(buf4);
+  );
+  printk("buf5:\n");
+  printk(buf5);
+
+  printk("timers set:\n");
+  for(j = 0; j<i; j++)
+  {
+    struct fast_timer *t = &tr[j];
+    printk("%-10s set: %6is %06ius exp: %6is %06ius "
+           "data: 0x%08X func: 0x%08X\n",
+           t->name,
+           t->tv_set.tv_sec,
+           t->tv_set.tv_usec,
+           t->tv_expires.tv_sec,
+           t->tv_expires.tv_usec,
+           t->data,
+           t->function
+           );
+
+    printk("           del: %6ius     did exp: %6is %06ius as #%i error: %6li\n",
+           t->delay_us,
+           tv_exp[j].tv_sec,
+           tv_exp[j].tv_usec,
+           exp_num[j],
+           (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
+  }
+  proc_fasttimer_read(buf5, NULL, 0, 0, 0);
+  printk("buf5 after all done:\n");
+  printk(buf5);
+  printk("fast_timer_test() done\n");
+}
+#endif
+
+
+void fast_timer_init(void)
+{
+  /* For some reason, request_irq() hangs when called froom time_init() */
+  if (!fast_timer_is_init)
+  {
+    printk("fast_timer_init()\n");
+
+#ifdef CONFIG_PROC_FS
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)
+   if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
+     fasttimer_proc_entry->read_proc = proc_fasttimer_read;
+#else
+    proc_register_dynamic(&proc_root, &fasttimer_proc_entry);
+#endif
+#endif /* PROC_FS */
+    if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_INTERRUPT,
+                   "fast timer int", NULL))
+    {
+      printk("err: timer1 irq\n");
+    }
+    fast_timer_is_init = 1;
+#ifdef FAST_TIMER_TEST
+    printk("do test\n");
+    fast_timer_test();
+#endif
+  }
+}

arch/cris/arch-v32/kernel/head.S

@@ -0,0 +1,448 @@
+/*
+ * CRISv32 kernel startup code.
+ *
+ * Copyright (C) 2003, Axis Communications AB
+ */
+
+#include <linux/config.h>
+
+#define ASSEMBLER_MACROS_ONLY
+
+/*
+ * The macros found in mmu_defs_asm.h uses the ## concatenation operator, so
+ * -traditional must not be used when assembling this file.
+ */
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/config_defs_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+
+#define CRAMFS_MAGIC 0x28cd3d45
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+	;; NOTE: R8 and R9 carry information from the decompressor (if the
+	;; kernel was compressed). They must not be used in the code below
+	;; until they are read!
+
+	;; Exported symbols.
+	.global etrax_irv
+	.global romfs_start
+	.global romfs_length
+	.global romfs_in_flash
+	.global swapper_pg_dir
+	.global crisv32_nand_boot
+	.global crisv32_nand_cramfs_offset
+
+	;; Dummy section to make it bootable with current VCS simulator
+#ifdef CONFIG_ETRAXFS_SIM
+	.section ".boot", "ax"
+	ba tstart
+	nop
+#endif
+
+	.text
+tstart:
+	;; This is the entry point of the kernel. The CPU is currently in
+	;; supervisor mode.
+	;;
+	;; 0x00000000 if flash.
+	;; 0x40004000 if DRAM.
+	;;
+	di
+
+	;; Start clocks for used blocks.
+	move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
+	move.d [$r1], $r0
+	or.d   REG_STATE(config, rw_clk_ctrl, cpu, yes) | \
+	       REG_STATE(config, rw_clk_ctrl, bif, yes) | \
+	       REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
+	move.d $r0, [$r1]
+
+	;; Set up waitstates etc
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0
+	move.d   CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1
+	move.d   $r1, [$r0]
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0
+	move.d   CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1
+	move.d   $r1, [$r0]
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0
+	move.d   CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1
+	move.d   $r1, [$r0]
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
+	move.d   CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
+	move.d   $r1, [$r0]
+
+#ifdef CONFIG_ETRAXFS_SIM
+	;; Set up minimal flash waitstates
+	move.d 0, $r10
+	move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
+	move.d $r10, [$r11]
+#endif
+
+	;; Setup and enable the MMU. Use same configuration for both the data
+	;; and the instruction MMU.
+	;;
+	;; Note; 3 cycles is needed for a bank-select to take effect. Further;
+	;; bank 1 is the instruction MMU, bank 2 is the data MMU.
+#ifndef CONFIG_ETRAXFS_SIM
+	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
+#else
+	;; Map the virtual DRAM to the RW eprom area at address 0.
+	;; Also map 0xa for the hook calls,
+	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb)   \
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
+#endif
+
+	;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
+	move.d	REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 4)  \
+		| REG_FIELD(mmu, rw_mm_kbase_lo, base_0, 0), $r1
+
+	;; Enable certain page protections and setup linear mapping
+	;; for f,e,c,b,4,0.
+#ifndef CONFIG_ETRAXFS_SIM
+	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, inv, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, seg_f, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_e, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_d, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_6, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_5, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_4, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_3, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#else
+	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, inv, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, seg_f, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_e, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_d, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_a, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_6, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_5, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_4, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_3, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#endif
+
+	;; Update instruction MMU.
+	move	1, $srs
+	nop
+	nop
+	nop
+	move	$r0, $s2	; kbase_hi.
+	move	$r1, $s1	; kbase_lo.
+	move	$r2, $s0	; mm_cfg, virtual memory configuration.
+
+	;; Update data MMU.
+	move	2, $srs
+	nop
+	nop
+	nop
+	move	$r0, $s2	; kbase_hi.
+	move	$r1, $s1	; kbase_lo
+	move	$r2, $s0	; mm_cfg, virtual memory configuration.
+
+	;; Enable data and instruction MMU.
+	move	0, $srs
+	moveq	0xf, $r0	;  IMMU, DMMU, DCache, Icache on
+	nop
+	nop
+	nop
+	move	$r0, $s0
+	nop
+	nop
+	nop
+
+#ifdef CONFIG_SMP
+	;; Read CPU ID
+	move    0, $srs
+	nop
+	nop
+	nop
+	move    $s10, $r0
+	cmpq    0, $r0
+	beq	master_cpu
+	nop
+slave_cpu:
+	; A slave waits for cpu_now_booting to be equal to CPU ID.
+	move.d	cpu_now_booting, $r1
+slave_wait:
+	cmp.d	[$r1], $r0
+	bne	slave_wait
+	nop
+	; Time to boot-up. Get stack location provided by master CPU.
+	move.d  smp_init_current_idle_thread, $r1
+	move.d  [$r1], $sp
+	add.d	8192, $sp
+	move.d	ebp_start, $r0	; Defined in linker-script.
+	move	$r0, $ebp
+	jsr	smp_callin
+	nop
+master_cpu:
+#endif
+#ifndef CONFIG_ETRAXFS_SIM
+	;; Check if starting from DRAM or flash.
+	lapcq	., $r0
+	and.d	0x7fffffff, $r0 ; Mask off the non-cache bit.
+	cmp.d	0x10000, $r0	; Arbitrary, something above this code.
+	blo	_inflash0
+	nop
+#endif
+
+	jump	_inram		; Jump to cached RAM.
+	nop
+
+	;; Jumpgate.
+_inflash0:
+	jump _inflash
+	nop
+
+	;; Put the following in a section so that storage for it can be
+	;; reclaimed after init is finished.
+	.section ".init.text", "ax"
+
+_inflash:
+
+	;; Initialize DRAM.
+	cmp.d	RAM_INIT_MAGIC, $r8 ; Already initialized?
+	beq	_dram_initialized
+	nop
+
+#include "../lib/dram_init.S"
+
+_dram_initialized:
+	;; Copy the text and data section to DRAM. This depends on that the
+	;; variables used below are correctly set up by the linker script.
+	;; The calculated value stored in R4 is used below.
+	moveq	0, $r0		; Source.
+	move.d	text_start, $r1	; Destination.
+	move.d	__vmlinux_end, $r2
+	move.d	$r2, $r4
+	sub.d	$r1, $r4
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
+	blo	1b
+	nop
+
+	;; Keep CRAMFS in flash.
+	moveq	0, $r0
+	move.d	romfs_length, $r1
+	move.d	$r0, [$r1]
+	move.d	[$r4], $r0	; cramfs_super.magic
+	cmp.d	CRAMFS_MAGIC, $r0
+	bne 1f
+	nop
+
+	addoq	+4, $r4, $acr
+	move.d	[$acr], $r0
+	move.d	romfs_length, $r1
+	move.d	$r0, [$r1]
+	add.d	0xf0000000, $r4	; Add cached flash start in virtual memory.
+	move.d	romfs_start, $r1
+	move.d	$r4, [$r1]
+1:	moveq	1, $r0
+	move.d	romfs_in_flash, $r1
+	move.d	$r0, [$r1]
+
+	jump	_start_it	; Jump to cached code.
+	nop
+
+_inram:
+	;; Check if booting from NAND flash (in that case we just remember the offset
+	;; into the flash where cramfs should be).
+	move.d	REG_ADDR(config, regi_config, r_bootsel), $r0
+	move.d	[$r0], $r0
+	and.d	REG_MASK(config, r_bootsel, boot_mode), $r0
+	cmp.d	REG_STATE(config, r_bootsel, boot_mode, nand), $r0
+	bne	move_cramfs
+	moveq	1,$r0
+	move.d	crisv32_nand_boot, $r1
+	move.d	$r0, [$r1]
+	move.d	crisv32_nand_cramfs_offset, $r1
+	move.d	$r9, [$r1]
+	moveq	1, $r0
+	move.d	romfs_in_flash, $r1
+	move.d	$r0, [$r1]
+	jump	_start_it
+	nop
+
+move_cramfs:
+	;; Move the cramfs after BSS.
+	moveq	0, $r0
+	move.d	romfs_length, $r1
+	move.d	$r0, [$r1]
+
+#ifndef CONFIG_ETRAXFS_SIM
+	;; The kernel could have been unpacked to DRAM by the loader, but
+	;; the cramfs image could still be inte the flash immediately
+	;; following the compressed kernel image. The loaded passes the address
+	;; of the bute succeeding the last compressed byte in the flash in
+	;; register R9 when starting the kernel.
+	cmp.d	0x0ffffff8, $r9
+	bhs	_no_romfs_in_flash ; R9 points outside the flash area.
+	nop
+#else
+	ba _no_romfs_in_flash
+	nop
+#endif
+	move.d	[$r9], $r0	; cramfs_super.magic
+	cmp.d	CRAMFS_MAGIC, $r0
+	bne	_no_romfs_in_flash
+	nop
+
+	addoq	+4, $r9, $acr
+	move.d	[$acr], $r0
+	move.d	romfs_length, $r1
+	move.d	$r0, [$r1]
+	add.d	0xf0000000, $r9	; Add cached flash start in virtual memory.
+	move.d	romfs_start, $r1
+	move.d	$r9, [$r1]
+	moveq	1, $r0
+	move.d	romfs_in_flash, $r1
+	move.d	$r0, [$r1]
+
+	jump	_start_it	; Jump to cached code.
+	nop
+
+_no_romfs_in_flash:
+	;; Look for cramfs.
+#ifndef CONFIG_ETRAXFS_SIM
+	move.d	__vmlinux_end, $r0
+#else
+	move.d	__end, $r0
+#endif
+	move.d	[$r0], $r1
+	cmp.d	CRAMFS_MAGIC, $r1
+	bne	2f
+	nop
+
+	addoq	+4, $r0, $acr
+	move.d	[$acr], $r2
+	move.d	_end, $r1
+	move.d	romfs_start, $r3
+	move.d	$r1, [$r3]
+	move.d	romfs_length, $r3
+	move.d	$r2, [$r3]
+
+#ifndef CONFIG_ETRAXFS_SIM
+	add.d	$r2, $r0
+	add.d	$r2, $r1
+
+	lsrq	1, $r2		; Size is in bytes, we copy words.
+	addq    1, $r2
+1:
+	move.w	[$r0], $r3
+	move.w	$r3, [$r1]
+	subq	2, $r0
+	subq	2, $r1
+	subq	1, $r2
+	bne	1b
+	nop
+#endif
+
+2:
+	moveq	0, $r0
+	move.d	romfs_in_flash, $r1
+	move.d	$r0, [$r1]
+
+	jump	_start_it	; Jump to cached code.
+	nop
+
+_start_it:
+
+	;; Check if kernel command line is supplied
+	cmp.d	COMMAND_LINE_MAGIC, $r10
+	bne	no_command_line
+	nop
+
+	move.d	256, $r13
+	move.d  cris_command_line, $r10
+	or.d	0x80000000, $r11 ; Make it virtual
+1:
+	move.b  [$r11+], $r12
+	move.b  $r12, [$r10+]
+	subq	1, $r13
+	bne	1b
+	nop
+
+no_command_line:
+
+	;; The kernel stack contains a task structure for each task. This
+	;; the initial kernel stack is in the same page as the init_task,
+	;; but starts at the top of the page, i.e. + 8192 bytes.
+	move.d	init_thread_union + 8192, $sp
+	move.d	ebp_start, $r0	; Defined in linker-script.
+	move	$r0, $ebp
+	move.d	etrax_irv, $r1	; Set the exception base register and pointer.
+	move.d	$r0, [$r1]
+
+#ifndef CONFIG_ETRAXFS_SIM
+	;; Clear the BSS region from _bss_start to _end.
+	move.d	__bss_start, $r0
+	move.d	_end, $r1
+1:	clear.d	[$r0+]
+	cmp.d	$r1, $r0
+	blo 1b
+	nop
+#endif
+
+#ifdef CONFIG_ETRAXFS_SIM
+	/* Set the watchdog timeout to something big. Will be removed when */
+	/* watchdog can be disabled with command line option */
+	move.d  0x7fffffff, $r10
+	jsr     CPU_WATCHDOG_TIMEOUT
+	nop
+#endif
+
+	; Initialize registers to increase determinism
+	move.d __bss_start, $r0
+	movem [$r0], $r13
+
+	jump	start_kernel	; Jump to start_kernel() in init/main.c.
+	nop
+
+	.data
+etrax_irv:
+	.dword 0
+romfs_start:
+	.dword 0
+romfs_length:
+	.dword 0
+romfs_in_flash:
+	.dword 0
+crisv32_nand_boot:
+	.dword 0
+crisv32_nand_cramfs_offset:
+	.dword 0
+
+swapper_pg_dir = 0xc0002000
+
+	.section ".init.data", "aw"
+
+#include "../lib/hw_settings.S"

arch/cris/arch-v32/kernel/io.c

@@ -0,0 +1,154 @@
+/*
+ * Helper functions for I/O pins.
+ *
+ * Copyright (c) 2004 Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/hwregs/gio_defs.h>
+
+struct crisv32_ioport crisv32_ioports[] =
+{
+	{
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_oe),
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pa_dout),
+		(unsigned long*)REG_ADDR(gio, regi_gio, r_pa_din),
+		8
+	},
+	{
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_oe),
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pb_dout),
+		(unsigned long*)REG_ADDR(gio, regi_gio, r_pb_din),
+		18
+	},
+	{
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_oe),
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pc_dout),
+		(unsigned long*)REG_ADDR(gio, regi_gio, r_pc_din),
+		18
+	},
+	{
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_oe),
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pd_dout),
+		(unsigned long*)REG_ADDR(gio, regi_gio, r_pd_din),
+		18
+	},
+	{
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_oe),
+		(unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout),
+		(unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din),
+		18
+	}
+};
+
+#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+
+struct crisv32_iopin crisv32_led1_green;
+struct crisv32_iopin crisv32_led1_red;
+struct crisv32_iopin crisv32_led2_green;
+struct crisv32_iopin crisv32_led2_red;
+struct crisv32_iopin crisv32_led3_green;
+struct crisv32_iopin crisv32_led3_red;
+
+/* Dummy port used when green LED and red LED is on the same bit */
+static unsigned long io_dummy;
+static struct crisv32_ioport dummy_port =
+{
+	&io_dummy,
+	&io_dummy,
+	&io_dummy,
+	18
+};
+static struct crisv32_iopin dummy_led =
+{
+	&dummy_port,
+	0
+};
+
+static int __init crisv32_io_init(void)
+{
+	int ret = 0;
+	/* Initialize LEDs */
+	ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G);
+	ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R);
+	ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G);
+	ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R);
+	ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G);
+	ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R);
+	crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out);
+	crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out);
+	crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
+	crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
+	crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
+	crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
+
+	if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R))
+		crisv32_led1_red = dummy_led;
+	if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R))
+		crisv32_led2_red = dummy_led;
+
+	return ret;
+}
+
+__initcall(crisv32_io_init);
+
+int crisv32_io_get(struct crisv32_iopin* iopin,
+                   unsigned int port, unsigned int pin)
+{
+	if (port > NBR_OF_PORTS)
+		return -EINVAL;
+	if (port > crisv32_ioports[port].pin_count)
+		return -EINVAL;
+
+	iopin->bit = 1 << pin;
+	iopin->port = &crisv32_ioports[port];
+
+	if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
+		return -EIO;
+
+	return 0;
+}
+
+int crisv32_io_get_name(struct crisv32_iopin* iopin,
+                         char* name)
+{
+	int port;
+	int pin;
+
+	if (toupper(*name) == 'P')
+		name++;
+
+	if (toupper(*name) < 'A' || toupper(*name) > 'E')
+		return -EINVAL;
+
+	port = toupper(*name) - 'A';
+	name++;
+	pin = simple_strtoul(name, NULL, 10);
+
+	if (pin < 0 || pin > crisv32_ioports[port].pin_count)
+		return -EINVAL;
+
+	iopin->bit = 1 << pin;
+	iopin->port = &crisv32_ioports[port];
+
+	if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
+		return -EIO;
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+/* PCI I/O access stuff */
+struct cris_io_operations* cris_iops = NULL;
+EXPORT_SYMBOL(cris_iops);
+#endif
+

arch/cris/arch-v32/kernel/irq.c

@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+#define CPU_FIXED -1
+
+/* IRQ masks (refer to comment for crisv32_do_multiple) */
+#define TIMER_MASK (1 << (TIMER_INTR_VECT - FIRST_IRQ))
+#ifdef CONFIG_ETRAX_KGDB
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+#define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ))
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+#define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ))
+#elif defined(CONFIG_ETRAX_KGB_PORT2)
+#define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ))
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+#define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ))
+#endif
+#endif
+
+DEFINE_SPINLOCK(irq_lock);
+
+struct cris_irq_allocation
+{
+  int cpu; /* The CPU to which the IRQ is currently allocated. */
+  cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */
+};
+
+struct cris_irq_allocation irq_allocations[NR_IRQS] =
+  {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}};
+
+static unsigned long irq_regs[NR_CPUS] =
+{
+  regi_irq,
+#ifdef CONFIG_SMP
+  regi_irq2,
+#endif
+};
+
+unsigned long cpu_irq_counters[NR_CPUS];
+unsigned long irq_counters[NR_REAL_IRQS];
+
+/* From irq.c. */
+extern void weird_irq(void);
+
+/* From entry.S. */
+extern void system_call(void);
+extern void nmi_interrupt(void);
+extern void multiple_interrupt(void);
+extern void gdb_handle_exception(void);
+extern void i_mmu_refill(void);
+extern void i_mmu_invalid(void);
+extern void i_mmu_access(void);
+extern void i_mmu_execute(void);
+extern void d_mmu_refill(void);
+extern void d_mmu_invalid(void);
+extern void d_mmu_access(void);
+extern void d_mmu_write(void);
+
+/* From kgdb.c. */
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
+/*
+ * Build the IRQ handler stubs using macros from irq.h. First argument is the
+ * IRQ number, the second argument is the corresponding bit in
+ * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h.
+ */
+BUILD_IRQ(0x31, (1 << 0))	/* memarb */
+BUILD_IRQ(0x32, (1 << 1))	/* gen_io */
+BUILD_IRQ(0x33, (1 << 2))	/* iop0 */
+BUILD_IRQ(0x34, (1 << 3))	/* iop1 */
+BUILD_IRQ(0x35, (1 << 4))	/* iop2 */
+BUILD_IRQ(0x36, (1 << 5))	/* iop3 */
+BUILD_IRQ(0x37, (1 << 6))	/* dma0 */
+BUILD_IRQ(0x38, (1 << 7))	/* dma1 */
+BUILD_IRQ(0x39, (1 << 8))	/* dma2 */
+BUILD_IRQ(0x3a, (1 << 9))	/* dma3 */
+BUILD_IRQ(0x3b, (1 << 10))	/* dma4 */
+BUILD_IRQ(0x3c, (1 << 11))	/* dma5 */
+BUILD_IRQ(0x3d, (1 << 12))	/* dma6 */
+BUILD_IRQ(0x3e, (1 << 13))	/* dma7 */
+BUILD_IRQ(0x3f, (1 << 14))	/* dma8 */
+BUILD_IRQ(0x40, (1 << 15))	/* dma9 */
+BUILD_IRQ(0x41, (1 << 16))	/* ata */
+BUILD_IRQ(0x42, (1 << 17))	/* sser0 */
+BUILD_IRQ(0x43, (1 << 18))	/* sser1 */
+BUILD_IRQ(0x44, (1 << 19))	/* ser0 */
+BUILD_IRQ(0x45, (1 << 20))	/* ser1 */
+BUILD_IRQ(0x46, (1 << 21))	/* ser2 */
+BUILD_IRQ(0x47, (1 << 22))	/* ser3 */
+BUILD_IRQ(0x48, (1 << 23))
+BUILD_IRQ(0x49, (1 << 24))	/* eth0 */
+BUILD_IRQ(0x4a, (1 << 25))	/* eth1 */
+BUILD_TIMER_IRQ(0x4b, (1 << 26))/* timer */
+BUILD_IRQ(0x4c, (1 << 27))	/* bif_arb */
+BUILD_IRQ(0x4d, (1 << 28))	/* bif_dma */
+BUILD_IRQ(0x4e, (1 << 29))	/* ext */
+BUILD_IRQ(0x4f, (1 << 29))	/* ipi */
+
+/* Pointers to the low-level handlers. */
+static void (*interrupt[NR_IRQS])(void) = {
+	IRQ0x31_interrupt, IRQ0x32_interrupt, IRQ0x33_interrupt,
+	IRQ0x34_interrupt, IRQ0x35_interrupt, IRQ0x36_interrupt,
+	IRQ0x37_interrupt, IRQ0x38_interrupt, IRQ0x39_interrupt,
+	IRQ0x3a_interrupt, IRQ0x3b_interrupt, IRQ0x3c_interrupt,
+	IRQ0x3d_interrupt, IRQ0x3e_interrupt, IRQ0x3f_interrupt,
+	IRQ0x40_interrupt, IRQ0x41_interrupt, IRQ0x42_interrupt,
+	IRQ0x43_interrupt, IRQ0x44_interrupt, IRQ0x45_interrupt,
+	IRQ0x46_interrupt, IRQ0x47_interrupt, IRQ0x48_interrupt,
+	IRQ0x49_interrupt, IRQ0x4a_interrupt, IRQ0x4b_interrupt,
+	IRQ0x4c_interrupt, IRQ0x4d_interrupt, IRQ0x4e_interrupt,
+	IRQ0x4f_interrupt
+};
+
+void
+block_irq(int irq, int cpu)
+{
+	int intr_mask;
+        unsigned long flags;
+
+        spin_lock_irqsave(&irq_lock, flags);
+        intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+
+	/* Remember; 1 let thru, 0 block. */
+	intr_mask &= ~(1 << (irq - FIRST_IRQ));
+
+	REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
+        spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+void
+unblock_irq(int irq, int cpu)
+{
+	int intr_mask;
+        unsigned long flags;
+
+        spin_lock_irqsave(&irq_lock, flags);
+        intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+
+	/* Remember; 1 let thru, 0 block. */
+	intr_mask |= (1 << (irq - FIRST_IRQ));
+
+	REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask);
+        spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+/* Find out which CPU the irq should be allocated to. */
+static int irq_cpu(int irq)
+{
+	int cpu;
+        unsigned long flags;
+
+        spin_lock_irqsave(&irq_lock, flags);
+        cpu = irq_allocations[irq - FIRST_IRQ].cpu;
+
+	/* Fixed interrupts stay on the local CPU. */
+	if (cpu == CPU_FIXED)
+        {
+		spin_unlock_irqrestore(&irq_lock, flags);
+		return smp_processor_id();
+        }
+
+
+	/* Let the interrupt stay if possible */
+	if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask))
+		goto out;
+
+	/* IRQ must be moved to another CPU. */
+	cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask);
+	irq_allocations[irq - FIRST_IRQ].cpu = cpu;
+out:
+	spin_unlock_irqrestore(&irq_lock, flags);
+	return cpu;
+}
+
+void
+mask_irq(int irq)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++)
+		block_irq(irq, cpu);
+}
+
+void
+unmask_irq(int irq)
+{
+	unblock_irq(irq, irq_cpu(irq));
+}
+
+
+static unsigned int startup_crisv32_irq(unsigned int irq)
+{
+	unmask_irq(irq);
+	return 0;
+}
+
+static void shutdown_crisv32_irq(unsigned int irq)
+{
+	mask_irq(irq);
+}
+
+static void enable_crisv32_irq(unsigned int irq)
+{
+	unmask_irq(irq);
+}
+
+static void disable_crisv32_irq(unsigned int irq)
+{
+	mask_irq(irq);
+}
+
+static void ack_crisv32_irq(unsigned int irq)
+{
+}
+
+static void end_crisv32_irq(unsigned int irq)
+{
+}
+
+void set_affinity_crisv32_irq(unsigned int irq, cpumask_t dest)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&irq_lock, flags);
+	irq_allocations[irq - FIRST_IRQ].mask = dest;
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static struct hw_interrupt_type crisv32_irq_type = {
+	.typename =    "CRISv32",
+	.startup =     startup_crisv32_irq,
+	.shutdown =    shutdown_crisv32_irq,
+	.enable =      enable_crisv32_irq,
+	.disable =     disable_crisv32_irq,
+	.ack =         ack_crisv32_irq,
+	.end =         end_crisv32_irq,
+	.set_affinity = set_affinity_crisv32_irq
+};
+
+void
+set_exception_vector(int n, irqvectptr addr)
+{
+	etrax_irv->v[n] = (irqvectptr) addr;
+}
+
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+void
+crisv32_do_IRQ(int irq, int block, struct pt_regs* regs)
+{
+	/* Interrupts that may not be moved to another CPU and
+         * are SA_INTERRUPT may skip blocking. This is currently
+         * only valid for the timer IRQ and the IPI and is used
+         * for the timer interrupt to avoid watchdog starvation.
+         */
+	if (!block) {
+		do_IRQ(irq, regs);
+		return;
+	}
+
+	block_irq(irq, smp_processor_id());
+	do_IRQ(irq, regs);
+
+	unblock_irq(irq, irq_cpu(irq));
+}
+
+/* If multiple interrupts occur simultaneously we get a multiple
+ * interrupt from the CPU and software has to sort out which
+ * interrupts that happened. There are two special cases here:
+ *
+ * 1. Timer interrupts may never be blocked because of the
+ *    watchdog (refer to comment in include/asr/arch/irq.h)
+ * 2. GDB serial port IRQs are unhandled here and will be handled
+ *    as a single IRQ when it strikes again because the GDB
+ *    stubb wants to save the registers in its own fashion.
+ */
+void
+crisv32_do_multiple(struct pt_regs* regs)
+{
+	int cpu;
+	int mask;
+	int masked;
+	int bit;
+
+	cpu = smp_processor_id();
+
+	/* An extra irq_enter here to prevent softIRQs to run after
+         * each do_IRQ. This will decrease the interrupt latency.
+	 */
+	irq_enter();
+
+	/* Get which IRQs that happend. */
+	masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect);
+
+	/* Calculate new IRQ mask with these IRQs disabled. */
+	mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+	mask &= ~masked;
+
+	/* Timer IRQ is never masked */
+	if (masked & TIMER_MASK)
+		mask |= TIMER_MASK;
+
+	/* Block all the IRQs */
+	REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask);
+
+	/* Check for timer IRQ and handle it special. */
+	if (masked & TIMER_MASK) {
+	        masked &= ~TIMER_MASK;
+		do_IRQ(TIMER_INTR_VECT, regs);
+	}
+
+#ifdef IGNORE_MASK
+	/* Remove IRQs that can't be handled as multiple. */
+	masked &= ~IGNORE_MASK;
+#endif
+
+	/* Handle the rest of the IRQs. */
+	for (bit = 0; bit < 32; bit++)
+	{
+		if (masked & (1 << bit))
+			do_IRQ(bit + FIRST_IRQ, regs);
+	}
+
+	/* Unblock all the IRQs. */
+	mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
+	mask |= masked;
+	REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask);
+
+	/* This irq_exit() will trigger the soft IRQs. */
+	irq_exit();
+}
+
+/*
+ * This is called by start_kernel. It fixes the IRQ masks and setup the
+ * interrupt vector table to point to bad_interrupt pointers.
+ */
+void __init
+init_IRQ(void)
+{
+	int i;
+	int j;
+	reg_intr_vect_rw_mask vect_mask = {0};
+
+	/* Clear all interrupts masks. */
+	REG_WR(intr_vect, regi_irq, rw_mask, vect_mask);
+
+	for (i = 0; i < 256; i++)
+		etrax_irv->v[i] = weird_irq;
+
+	/* Point all IRQ's to bad handlers. */
+	for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) {
+		irq_desc[j].handler = &crisv32_irq_type;
+		set_exception_vector(i, interrupt[j]);
+	}
+
+        /* Mark Timer and IPI IRQs as CPU local */
+	irq_allocations[TIMER_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
+	irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU;
+	irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
+	irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU;
+
+	set_exception_vector(0x00, nmi_interrupt);
+	set_exception_vector(0x30, multiple_interrupt);
+
+	/* Set up handler for various MMU bus faults. */
+	set_exception_vector(0x04, i_mmu_refill);
+	set_exception_vector(0x05, i_mmu_invalid);
+	set_exception_vector(0x06, i_mmu_access);
+	set_exception_vector(0x07, i_mmu_execute);
+	set_exception_vector(0x08, d_mmu_refill);
+	set_exception_vector(0x09, d_mmu_invalid);
+	set_exception_vector(0x0a, d_mmu_access);
+	set_exception_vector(0x0b, d_mmu_write);
+
+	/* The system-call trap is reached by "break 13". */
+	set_exception_vector(0x1d, system_call);
+
+	/* Exception handlers for debugging, both user-mode and kernel-mode. */
+
+	/* Break 8. */
+	set_exception_vector(0x18, gdb_handle_exception);
+	/* Hardware single step. */
+	set_exception_vector(0x3, gdb_handle_exception);
+	/* Hardware breakpoint. */
+	set_exception_vector(0xc, gdb_handle_exception);
+
+#ifdef CONFIG_ETRAX_KGDB
+	kgdb_init();
+	/* Everything is set up; now trap the kernel. */
+	breakpoint();
+#endif
+}
+

arch/cris/arch-v32/kernel/kgdb_asm.S

@@ -0,0 +1,552 @@
+/*
+ *  Copyright (C) 2004 Axis Communications AB
+ *
+ * Code for handling break 8, hardware breakpoint, single step, and serial
+ * port exceptions for kernel debugging purposes.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/intr_vect.h>
+
+	;; Exported functions.
+	.globl kgdb_handle_exception
+
+kgdb_handle_exception:
+
+;; Create a register image of the caller.
+;;
+;; First of all, save the ACR on the stack since we need it for address calculations.
+;; We put it into the register struct later.
+
+  subq     4, $sp
+  move.d   $acr, [$sp]
+
+;; Now we are free to use ACR all we want.
+;; If we were running this handler with interrupts on, we would have to be careful
+;; to save and restore CCS manually, but since we aren't we treat it like every other
+;; register.
+
+  move.d   reg,  $acr
+  move.d   $r0,  [$acr]        ; Save R0 (start of register struct)
+  addq     4,    $acr
+  move.d   $r1,  [$acr]        ; Save R1
+  addq     4,    $acr
+  move.d   $r2,  [$acr]        ; Save R2
+  addq     4,    $acr
+  move.d   $r3,  [$acr]        ; Save R3
+  addq     4,    $acr
+  move.d   $r4,  [$acr]        ; Save R4
+  addq     4,    $acr
+  move.d   $r5,  [$acr]        ; Save R5
+  addq     4,    $acr
+  move.d   $r6,  [$acr]        ; Save R6
+  addq     4,    $acr
+  move.d   $r7,  [$acr]        ; Save R7
+  addq     4,    $acr
+  move.d   $r8,  [$acr]        ; Save R8
+  addq     4,    $acr
+  move.d   $r9,  [$acr]        ; Save R9
+  addq     4,    $acr
+  move.d   $r10, [$acr]        ; Save R10
+  addq     4,    $acr
+  move.d   $r11, [$acr]        ; Save R11
+  addq     4,    $acr
+  move.d   $r12, [$acr]        ; Save R12
+  addq     4,    $acr
+  move.d   $r13, [$acr]        ; Save R13
+  addq     4,    $acr
+  move.d   $sp,  [$acr]        ; Save SP (R14)
+  addq     4,    $acr
+
+  ;; The ACR register is already saved on the stack, so pop it from there.
+  move.d   [$sp],$r0
+  move.d   $r0,  [$acr]
+  addq     4,    $acr
+
+  move     $bz,  [$acr]
+  addq     1,    $acr
+  move     $vr,  [$acr]
+  addq     1,    $acr
+  move     $pid, [$acr]
+  addq     4,    $acr
+  move     $srs, [$acr]
+  addq     1,    $acr
+  move     $wz,  [$acr]
+  addq     2,    $acr
+  move     $exs, [$acr]
+  addq     4,    $acr
+  move     $eda, [$acr]
+  addq     4,    $acr
+  move     $mof, [$acr]
+  addq     4,    $acr
+  move     $dz,  [$acr]
+  addq     4,    $acr
+  move     $ebp, [$acr]
+  addq     4,    $acr
+  move     $erp, [$acr]
+  addq     4,    $acr
+  move     $srp, [$acr]
+  addq     4,    $acr
+  move     $nrp, [$acr]
+  addq     4,    $acr
+  move     $ccs, [$acr]
+  addq     4,    $acr
+  move     $usp, [$acr]
+  addq     4,    $acr
+  move     $spc, [$acr]
+  addq     4,     $acr
+
+;; Skip the pseudo-PC.
+  addq     4,     $acr
+
+;; Save the support registers in bank 0 - 3.
+  clear.d $r1 ; Bank counter
+  move.d  sreg, $acr
+
+;; Bank 0
+  move    $r1,  $srs
+  nop
+  nop
+  nop
+  move    $s0,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s1,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s2,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s3,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s4,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s5,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s6,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s7,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s8,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s9,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s10,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s11,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s12,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+
+  ;; Nothing in S13 - S15, bank 0
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+
+;; Bank 1 and bank 2 have the same layout, hence the loop.
+  addq    1, $r1
+1:
+  move    $r1,  $srs
+  nop
+  nop
+  nop
+  move    $s0,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s1,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s2,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s3,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s4,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s5,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s6,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+
+  ;; Nothing in S7 - S15, bank 1 and 2
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+  clear.d [$acr]
+  addq    4,     $acr
+
+  addq 1, $r1
+  cmpq 3, $r1
+  bne 1b
+  nop
+
+;; Bank 3
+  move    $r1,  $srs
+  nop
+  nop
+  nop
+  move    $s0,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s1,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s2,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s3,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s4,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s5,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s6,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s7,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s8,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s9,   $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s10,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s11,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s12,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s13,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+  move    $s14,  $r0
+  move.d  $r0,   [$acr]
+  addq    4,     $acr
+;; Nothing in S15, bank 3
+  clear.d [$acr]
+  addq    4,     $acr
+
+;; Check what got us here: get IDX field of EXS.
+  move $exs,    $r10
+  and.d 0xff00, $r10
+  lsrq 8,       $r10
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+  cmp.d SER0_INTR_VECT,   $r10 ; IRQ for serial port 0
+  beq sigint
+  nop
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+  cmp.d SER1_INTR_VECT,   $r10 ; IRQ for serial port 1
+  beq sigint
+  nop
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+  cmp.d SER2_INTR_VECT,   $r10 ; IRQ for serial port 2
+  beq sigint
+  nop
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+  cmp.d SER3_INTR_VECT,   $r10 ; IRQ for serial port 3
+  beq sigint
+  nop
+#endif
+;; Multiple interrupt must be due to serial break.
+  cmp.d 0x30,   $r10 ; Multiple interrupt
+  beq sigint
+  nop
+;; Neither of those? Then it's a sigtrap.
+  ba handle_comm
+  moveq 5, $r10      ; Set SIGTRAP (delay slot)
+
+sigint:
+  ;; Serial interrupt; get character
+  jsr getDebugChar
+  nop                ; Delay slot
+  cmp.b 3, $r10      ; \003 (Ctrl-C)?
+  bne return         ; No, get out of here
+  nop
+  moveq 2, $r10      ; Set SIGINT
+
+;;
+;; Handle the communication
+;;
+handle_comm:
+  move.d   internal_stack+1020, $sp ; Use the internal stack which grows upwards
+  jsr      handle_exception         ; Interactive routine
+  nop
+
+;;
+;; Return to the caller
+;;
+return:
+
+;; First of all, write the support registers.
+  clear.d $r1 ; Bank counter
+  move.d  sreg, $acr
+
+;; Bank 0
+  move    $r1,  $srs
+  nop
+  nop
+  nop
+  move.d  [$acr], $r0
+  move    $r0,    $s0
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s1
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s2
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s3
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s4
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s5
+  addq    4,      $acr
+
+;; Nothing in S6 - S7, bank 0.
+  addq    4,      $acr
+  addq    4,      $acr
+
+  move.d  [$acr], $r0
+  move    $r0,    $s8
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s9
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s10
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s11
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s12
+  addq    4,      $acr
+
+;; Nothing in S13 - S15, bank 0
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+
+;; Bank 1 and bank 2 have the same layout, hence the loop.
+  addq    1, $r1
+2:
+  move    $r1,  $srs
+  nop
+  nop
+  nop
+  move.d  [$acr], $r0
+  move    $r0,    $s0
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s1
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s2
+  addq    4,      $acr
+
+;; S3 (MM_CAUSE) is read-only.
+  addq    4,      $acr
+
+  move.d  [$acr], $r0
+  move    $r0,    $s4
+  addq    4,      $acr
+
+;; FIXME: Actually write S5/S6? (Affects MM_CAUSE.)
+  addq    4,      $acr
+  addq    4,      $acr
+
+;; Nothing in S7 - S15, bank 1 and 2
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+  addq    4,      $acr
+
+  addq 1, $r1
+  cmpq 3, $r1
+  bne 2b
+  nop
+
+;; Bank 3
+  move    $r1,  $srs
+  nop
+  nop
+  nop
+  move.d  [$acr], $r0
+  move    $r0,    $s0
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s1
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s2
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s3
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s4
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s5
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s6
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s7
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s8
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s9
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s10
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s11
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s12
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s13
+  addq    4,      $acr
+  move.d  [$acr], $r0
+  move    $r0,    $s14
+  addq    4,      $acr
+
+;; Nothing in S15, bank 3
+  addq    4,      $acr
+
+;; Now, move on to the regular register restoration process.
+
+   move.d  reg,    $acr   ; Reset ACR to point at the beginning of the register image
+   move.d  [$acr], $r0    ; Restore R0
+   addq    4,      $acr
+   move.d  [$acr], $r1    ; Restore R1
+   addq    4,      $acr
+   move.d  [$acr], $r2    ; Restore R2
+   addq    4,      $acr
+   move.d  [$acr], $r3    ; Restore R3
+   addq    4,      $acr
+   move.d  [$acr], $r4    ; Restore R4
+   addq    4,      $acr
+   move.d  [$acr], $r5    ; Restore R5
+   addq    4,      $acr
+   move.d  [$acr], $r6    ; Restore R6
+   addq    4,      $acr
+   move.d  [$acr], $r7    ; Restore R7
+   addq    4,      $acr
+   move.d  [$acr], $r8    ; Restore R8
+   addq    4,      $acr
+   move.d  [$acr], $r9    ; Restore R9
+   addq    4,      $acr
+   move.d  [$acr], $r10   ; Restore R10
+   addq    4,      $acr
+   move.d  [$acr], $r11   ; Restore R11
+   addq    4,      $acr
+   move.d  [$acr], $r12   ; Restore R12
+   addq    4,      $acr
+   move.d  [$acr], $r13   ; Restore R13
+
+;;
+;; We restore all registers, even though some of them probably haven't changed.
+;;
+
+   addq    4,      $acr
+   move.d  [$acr], $sp    ; Restore SP (R14)
+
+   ;; ACR cannot be restored just yet.
+   addq    8,      $acr
+
+   ;; Skip BZ, VR.
+   addq    2,      $acr
+
+   move    [$acr], $pid   ; Restore PID
+   addq    4,      $acr
+   move    [$acr], $srs   ; Restore SRS
+   nop
+   nop
+   nop
+   addq    1,      $acr
+
+   ;; Skip WZ.
+   addq    2,      $acr
+
+   move    [$acr], $exs    ; Restore EXS.
+   addq    4,      $acr
+   move    [$acr], $eda    ; Restore EDA.
+   addq    4,      $acr
+   move    [$acr], $mof    ; Restore MOF.
+
+   ;; Skip DZ.
+   addq    8,      $acr
+
+   move    [$acr], $ebp    ; Restore EBP.
+   addq    4,      $acr
+   move    [$acr], $erp    ; Restore ERP.
+   addq    4,      $acr
+   move    [$acr], $srp    ; Restore SRP.
+   addq    4,      $acr
+   move    [$acr], $nrp    ; Restore NRP.
+   addq    4,      $acr
+   move    [$acr], $ccs    ; Restore CCS like an ordinary register.
+   addq    4,      $acr
+   move    [$acr], $usp    ; Restore USP
+   addq    4,      $acr
+   move    [$acr], $spc    ; Restore SPC
+                           ; No restoration of pseudo-PC of course.
+
+   move.d  reg,    $acr    ; Reset ACR to point at the beginning of the register image
+   add.d   15*4,   $acr
+   move.d  [$acr], $acr    ; Finally, restore ACR.
+   rete                    ; Same as jump ERP
+   rfe                     ; Shifts CCS

arch/cris/arch-v32/kernel/pinmux.c

@@ -0,0 +1,229 @@
+/*
+ * Allocator for I/O pins. All pins are allocated to GPIO at bootup.
+ * Unassigned pins and GPIO pins can be allocated to a fixed interface
+ * or the I/O processor instead.
+ *
+ * Copyright (c) 2004 Axis Communications AB.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/hwregs/pinmux_defs.h>
+
+#undef DEBUG
+
+#define PORT_PINS 18
+#define PORTS 4
+
+static char pins[PORTS][PORT_PINS];
+static DEFINE_SPINLOCK(pinmux_lock);
+
+static void crisv32_pinmux_set(int port);
+
+int
+crisv32_pinmux_init(void)
+{
+	static int initialized = 0;
+
+	if (!initialized) {
+		reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
+		initialized = 1;
+		pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
+		pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
+		REG_WR(pinmux, regi_pinmux, rw_pa, pa);
+		crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
+		crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
+		crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio);
+		crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio);
+	}
+
+	return 0;
+}
+
+int
+crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
+{
+	int i;
+	unsigned long flags;
+
+	crisv32_pinmux_init();
+
+	if (port > PORTS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&pinmux_lock, flags);
+
+	for (i = first_pin; i <= last_pin; i++)
+	{
+		if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
+		    (pins[port][i] != mode))
+		{
+			spin_unlock_irqrestore(&pinmux_lock, flags);
+#ifdef DEBUG
+			panic("Pinmux alloc failed!\n");
+#endif
+			return -EPERM;
+		}
+	}
+
+	for (i = first_pin; i <= last_pin; i++)
+		pins[port][i] = mode;
+
+	crisv32_pinmux_set(port);
+
+	spin_unlock_irqrestore(&pinmux_lock, flags);
+
+	return 0;
+}
+
+int
+crisv32_pinmux_alloc_fixed(enum fixed_function function)
+{
+	int ret = -EINVAL;
+	char saved[sizeof pins];
+	unsigned long flags;
+
+	spin_lock_irqsave(&pinmux_lock, flags);
+
+	/* Save internal data for recovery */
+	memcpy(saved, pins, sizeof pins);
+
+	reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
+
+	switch(function)
+	{
+	case pinmux_ser1:
+		ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
+		hwprot.ser1 = regk_pinmux_yes;
+		break;
+	case pinmux_ser2:
+		ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
+		hwprot.ser2 = regk_pinmux_yes;
+		break;
+	case pinmux_ser3:
+		ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
+		hwprot.ser3 = regk_pinmux_yes;
+		break;
+	case pinmux_sser0:
+		ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
+		ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
+		hwprot.sser0 = regk_pinmux_yes;
+		break;
+	case pinmux_sser1:
+		ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
+		hwprot.sser1 = regk_pinmux_yes;
+		break;
+	case pinmux_ata0:
+		ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
+		ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
+		hwprot.ata0 = regk_pinmux_yes;
+		break;
+	case pinmux_ata1:
+		ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
+		ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
+		hwprot.ata1 = regk_pinmux_yes;
+		break;
+	case pinmux_ata2:
+		ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
+		ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
+		hwprot.ata2 = regk_pinmux_yes;
+		break;
+	case pinmux_ata3:
+		ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
+		ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
+		hwprot.ata2 = regk_pinmux_yes;
+		break;
+	case pinmux_ata:
+		ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
+		ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
+		hwprot.ata = regk_pinmux_yes;
+		break;
+	case pinmux_eth1:
+		ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
+		hwprot.eth1 = regk_pinmux_yes;
+		hwprot.eth1_mgm = regk_pinmux_yes;
+		break;
+	case pinmux_timer:
+		ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
+		hwprot.timer = regk_pinmux_yes;
+		spin_unlock_irqrestore(&pinmux_lock, flags);
+		return ret;
+	}
+
+	if (!ret)
+		REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
+	else
+		memcpy(pins, saved, sizeof pins);
+
+  spin_unlock_irqrestore(&pinmux_lock, flags);
+
+  return ret;
+}
+
+void
+crisv32_pinmux_set(int port)
+{
+	int i;
+	int gpio_val = 0;
+	int iop_val = 0;
+
+	for (i = 0; i < PORT_PINS; i++)
+	{
+		if (pins[port][i] == pinmux_gpio)
+			gpio_val |= (1 << i);
+		else if (pins[port][i] == pinmux_iop)
+			iop_val |= (1 << i);
+	}
+
+	REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val);
+	REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val);
+
+#ifdef DEBUG
+       crisv32_pinmux_dump();
+#endif
+}
+
+int
+crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
+{
+	int i;
+	unsigned long flags;
+
+	crisv32_pinmux_init();
+
+	if (port > PORTS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&pinmux_lock, flags);
+
+	for (i = first_pin; i <= last_pin; i++)
+		pins[port][i] = pinmux_none;
+
+	crisv32_pinmux_set(port);
+	spin_unlock_irqrestore(&pinmux_lock, flags);
+
+	return 0;
+}
+
+void
+crisv32_pinmux_dump(void)
+{
+	int i, j;
+
+	crisv32_pinmux_init();
+
+	for (i = 0; i < PORTS; i++)
+	{
+		printk("Port %c\n", 'B'+i);
+		for (j = 0; j < PORT_PINS; j++)
+			printk("  Pin %d = %d\n", j, pins[i][j]);
+	}
+}
+
+__initcall(crisv32_pinmux_init);

arch/cris/arch-v32/kernel/process.c

@@ -0,0 +1,270 @@
+/*
+ *  Copyright (C) 2000-2003  Axis Communications AB
+ *
+ *  Authors:   Bjorn Wesen (bjornw@axis.com)
+ *             Mikael Starvik (starvik@axis.com)
+ *             Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
+ *
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+extern void stop_watchdog(void);
+
+#ifdef CONFIG_ETRAX_GPIO
+extern void etrax_gpio_wake_up_check(void); /* Defined in drivers/gpio.c. */
+#endif
+
+extern int cris_hlt_counter;
+
+/* We use this if we don't have any better idle routine. */
+void default_idle(void)
+{
+	local_irq_disable();
+	if (!need_resched() && !cris_hlt_counter) {
+	        /* Halt until exception. */
+		__asm__ volatile("ei    \n\t"
+                                 "halt      ");
+	}
+	local_irq_enable();
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+
+extern void deconfigure_bp(long pid);
+void exit_thread(void)
+{
+	deconfigure_bp(current->pid);
+}
+
+/*
+ * If the watchdog is enabled, disable interrupts and enter an infinite loop.
+ * The watchdog will reset the CPU after 0.1s. If the watchdog isn't enabled
+ * then enable it and wait.
+ */
+extern void arch_enable_nmi(void);
+
+void
+hard_reset_now(void)
+{
+	/*
+	 * Don't declare this variable elsewhere.  We don't want any other
+	 * code to know about it than the watchdog handler in entry.S and
+	 * this code, implementing hard reset through the watchdog.
+	 */
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	extern int cause_of_death;
+#endif
+
+	printk("*** HARD RESET ***\n");
+	local_irq_disable();
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	cause_of_death = 0xbedead;
+#else
+{
+	reg_timer_rw_wd_ctrl wd_ctrl = {0};
+
+	stop_watchdog();
+
+	wd_ctrl.key = 16;	/* Arbitrary key. */
+	wd_ctrl.cnt = 1;	/* Minimum time. */
+	wd_ctrl.cmd = regk_timer_start;
+
+        arch_enable_nmi();
+	REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+}
+#endif
+
+	while (1)
+		; /* Wait for reset. */
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *t)
+{
+	return (unsigned long)user_regs(t->thread_info)->erp;
+}
+
+static void
+kernel_thread_helper(void* dummy, int (*fn)(void *), void * arg)
+{
+	fn(arg);
+	do_exit(-1); /* Should never be called, return bad exit value. */
+}
+
+/* Create a kernel thread. */
+int
+kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+        /* Don't use r10 since that is set to 0 in copy_thread. */
+	regs.r11 = (unsigned long) fn;
+	regs.r12 = (unsigned long) arg;
+	regs.erp = (unsigned long) kernel_thread_helper;
+	regs.ccs = 1 << (I_CCS_BITNR + CCS_SHIFT);
+
+	/* Create the new process. */
+        return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
+}
+
+/*
+ * Setup the child's kernel stack with a pt_regs and call switch_stack() on it.
+ * It will be unnested during _resume and _ret_from_sys_call when the new thread
+ * is scheduled.
+ *
+ * Also setup the thread switching structure which is used to keep
+ * thread-specific data during _resumes.
+ */
+
+extern asmlinkage void ret_from_fork(void);
+
+int
+copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+	unsigned long unused,
+	struct task_struct *p, struct pt_regs *regs)
+{
+	struct pt_regs *childregs;
+	struct switch_stack *swstack;
+
+	/*
+	 * Put the pt_regs structure at the end of the new kernel stack page and
+	 * fix it up. Note: the task_struct doubles as the kernel stack for the
+	 * task.
+	 */
+	childregs = user_regs(p->thread_info);
+	*childregs = *regs;	/* Struct copy of pt_regs. */
+        p->set_child_tid = p->clear_child_tid = NULL;
+        childregs->r10 = 0;	/* Child returns 0 after a fork/clone. */
+
+	/* Set a new TLS ?
+	 * The TLS is in $mof beacuse it is the 5th argument to sys_clone.
+	 */
+	if (p->mm && (clone_flags & CLONE_SETTLS)) {
+		p->thread_info->tls = regs->mof;
+	}
+
+	/* Put the switch stack right below the pt_regs. */
+	swstack = ((struct switch_stack *) childregs) - 1;
+
+	/* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */
+	swstack->r9 = 0;
+
+	/*
+	 * We want to return into ret_from_sys_call after the _resume.
+	 * ret_from_fork will call ret_from_sys_call.
+	 */
+	swstack->return_ip = (unsigned long) ret_from_fork;
+
+	/* Fix the user-mode and kernel-mode stackpointer. */
+	p->thread.usp = usp;
+	p->thread.ksp = (unsigned long) swstack;
+
+	return 0;
+}
+
+/*
+ * Be aware of the "magic" 7th argument in the four system-calls below.
+ * They need the latest stackframe, which is put as the 7th argument by
+ * entry.S. The previous arguments are dummies or actually used, but need
+ * to be defined to reach the 7th argument.
+ *
+ * N.B.: Another method to get the stackframe is to use current_regs(). But
+ * it returns the latest stack-frame stacked when going from _user mode_ and
+ * some of these (at least sys_clone) are called from kernel-mode sometimes
+ * (for example during kernel_thread, above) and thus cannot use it. Thus,
+ * to be sure not to get any surprises, we use the method for the other calls
+ * as well.
+ */
+asmlinkage int
+sys_fork(long r10, long r11, long r12, long r13, long mof, long srp,
+	struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
+}
+
+/* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
+asmlinkage int
+sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid,
+	unsigned long tls, long srp, struct pt_regs *regs)
+{
+	if (!newusp)
+		newusp = rdusp();
+
+	return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
+}
+
+/*
+ * vfork is a system call in i386 because of register-pressure - maybe
+ * we can remove it and handle it in libc but we put it here until then.
+ */
+asmlinkage int
+sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
+	struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
+}
+
+/* sys_execve() executes a new program. */
+asmlinkage int
+sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
+	struct pt_regs *regs)
+{
+	int error;
+	char *filename;
+
+	filename = getname(fname);
+	error = PTR_ERR(filename);
+
+	if (IS_ERR(filename))
+	        goto out;
+
+	error = do_execve(filename, argv, envp, regs);
+	putname(filename);
+ out:
+	return error;
+}
+
+unsigned long
+get_wchan(struct task_struct *p)
+{
+	/* TODO */
+	return 0;
+}
+#undef last_sched
+#undef first_sched
+
+void show_regs(struct pt_regs * regs)
+{
+	unsigned long usp = rdusp();
+        printk("ERP: %08lx SRP: %08lx  CCS: %08lx USP: %08lx MOF: %08lx\n",
+		regs->erp, regs->srp, regs->ccs, usp, regs->mof);
+
+	printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+		regs->r0, regs->r1, regs->r2, regs->r3);
+
+	printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+		regs->r4, regs->r5, regs->r6, regs->r7);
+
+	printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+		regs->r8, regs->r9, regs->r10, regs->r11);
+
+	printk("r12: %08lx r13: %08lx oR10: %08lx\n",
+		regs->r12, regs->r13, regs->orig_r10);
+}

arch/cris/arch-v32/kernel/ptrace.c

@@ -0,0 +1,597 @@
+/*
+ * Copyright (C) 2000-2003, Axis Communications AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+#include <linux/security.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/arch/hwregs/supp_reg.h>
+
+/*
+ * Determines which bits in CCS the user has access to.
+ * 1 = access, 0 = no access.
+ */
+#define CCS_MASK 0x00087c00     /* SXNZVC */
+
+#define SBIT_USER (1 << (S_CCS_BITNR + CCS_SHIFT))
+
+static int put_debugreg(long pid, unsigned int regno, long data);
+static long get_debugreg(long pid, unsigned int regno);
+static unsigned long get_pseudo_pc(struct task_struct *child);
+void deconfigure_bp(long pid);
+
+extern unsigned long cris_signal_return_page;
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+long get_reg(struct task_struct *task, unsigned int regno)
+{
+	/* USP is a special case, it's not in the pt_regs struct but
+	 * in the tasks thread struct
+	 */
+	unsigned long ret;
+
+	if (regno <= PT_EDA)
+		ret = ((unsigned long *)user_regs(task->thread_info))[regno];
+	else if (regno == PT_USP)
+		ret = task->thread.usp;
+	else if (regno == PT_PPC)
+		ret = get_pseudo_pc(task);
+	else if (regno <= PT_MAX)
+		ret = get_debugreg(task->pid, regno);
+	else
+		ret = 0;
+
+	return ret;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+int put_reg(struct task_struct *task, unsigned int regno, unsigned long data)
+{
+	if (regno <= PT_EDA)
+		((unsigned long *)user_regs(task->thread_info))[regno] = data;
+	else if (regno == PT_USP)
+		task->thread.usp = data;
+	else if (regno == PT_PPC) {
+		/* Write pseudo-PC to ERP only if changed. */
+		if (data != get_pseudo_pc(task))
+			((unsigned long *)user_regs(task->thread_info))[PT_ERP] = data;
+	} else if (regno <= PT_MAX)
+		return put_debugreg(task->pid, regno, data);
+	else
+		return -1;
+	return 0;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching.
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable(struct task_struct *child)
+{
+	unsigned long tmp;
+
+	/* Deconfigure SPC and S-bit. */
+	tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+	put_reg(child, PT_CCS, tmp);
+	put_reg(child, PT_SPC, 0);
+
+	/* Deconfigure any watchpoints associated with the child. */
+	deconfigure_bp(child->pid);
+}
+
+
+asmlinkage int
+sys_ptrace(long request, long pid, long addr, long data)
+{
+	struct task_struct *child;
+	int ret;
+	unsigned long __user *datap = (unsigned long __user *)data;
+
+	lock_kernel();
+	ret = -EPERM;
+
+	if (request == PTRACE_TRACEME) {
+		/* are we already being traced? */
+		if (current->ptrace & PT_PTRACED)
+			goto out;
+		ret = security_ptrace(current->parent, current);
+		if (ret)
+			goto out;
+		/* set the ptrace bit in the process flags. */
+		current->ptrace |= PT_PTRACED;
+		ret = 0;
+		goto out;
+	}
+
+	ret = -ESRCH;
+	read_lock(&tasklist_lock);
+	child = find_task_by_pid(pid);
+
+	if (child)
+		get_task_struct(child);
+
+	read_unlock(&tasklist_lock);
+
+	if (!child)
+		goto out;
+
+	ret = -EPERM;
+
+	if (pid == 1)		/* Leave the init process alone! */
+		goto out_tsk;
+
+	if (request == PTRACE_ATTACH) {
+		ret = ptrace_attach(child);
+		goto out_tsk;
+	}
+
+	ret = ptrace_check_attach(child, request == PTRACE_KILL);
+	if (ret < 0)
+		goto out_tsk;
+
+	switch (request) {
+		/* Read word at location address. */
+		case PTRACE_PEEKTEXT:
+		case PTRACE_PEEKDATA: {
+			unsigned long tmp;
+			int copied;
+
+			ret = -EIO;
+
+			/* The signal trampoline page is outside the normal user-addressable
+			 * space but still accessible. This is hack to make it possible to
+			 * access the signal handler code in GDB.
+			 */
+			if ((addr & PAGE_MASK) == cris_signal_return_page) {
+				/* The trampoline page is globally mapped, no page table to traverse.*/
+				tmp = *(unsigned long*)addr;
+			} else {
+				copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+
+				if (copied != sizeof(tmp))
+					break;
+			}
+
+			ret = put_user(tmp,datap);
+			break;
+		}
+
+		/* Read the word at location address in the USER area. */
+		case PTRACE_PEEKUSR: {
+			unsigned long tmp;
+
+			ret = -EIO;
+			if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+				break;
+
+			tmp = get_reg(child, addr >> 2);
+			ret = put_user(tmp, datap);
+			break;
+		}
+
+		/* Write the word at location address. */
+		case PTRACE_POKETEXT:
+		case PTRACE_POKEDATA:
+			ret = 0;
+
+			if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
+				break;
+
+			ret = -EIO;
+			break;
+
+ 		/* Write the word at location address in the USER area. */
+		case PTRACE_POKEUSR:
+			ret = -EIO;
+			if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+				break;
+
+			addr >>= 2;
+
+			if (addr == PT_CCS) {
+				/* don't allow the tracing process to change stuff like
+				 * interrupt enable, kernel/user bit, dma enables etc.
+				 */
+				data &= CCS_MASK;
+				data |= get_reg(child, PT_CCS) & ~CCS_MASK;
+			}
+			if (put_reg(child, addr, data))
+				break;
+			ret = 0;
+			break;
+
+		case PTRACE_SYSCALL:
+		case PTRACE_CONT:
+			ret = -EIO;
+
+			if (!valid_signal(data))
+				break;
+
+			/* Continue means no single-step. */
+			put_reg(child, PT_SPC, 0);
+
+			if (!get_debugreg(child->pid, PT_BP_CTRL)) {
+				unsigned long tmp;
+				/* If no h/w bp configured, disable S bit. */
+				tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+				put_reg(child, PT_CCS, tmp);
+			}
+
+			if (request == PTRACE_SYSCALL) {
+				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+			}
+			else {
+				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+			}
+
+			child->exit_code = data;
+
+			/* TODO: make sure any pending breakpoint is killed */
+			wake_up_process(child);
+			ret = 0;
+
+			break;
+
+ 		/* Make the child exit by sending it a sigkill. */
+		case PTRACE_KILL:
+			ret = 0;
+
+			if (child->exit_state == EXIT_ZOMBIE)
+				break;
+
+			child->exit_code = SIGKILL;
+
+			/* Deconfigure single-step and h/w bp. */
+			ptrace_disable(child);
+
+			/* TODO: make sure any pending breakpoint is killed */
+			wake_up_process(child);
+			break;
+
+		/* Set the trap flag. */
+		case PTRACE_SINGLESTEP:	{
+			unsigned long tmp;
+			ret = -EIO;
+
+			/* Set up SPC if not set already (in which case we have
+			   no other choice but to trust it). */
+			if (!get_reg(child, PT_SPC)) {
+				/* In case we're stopped in a delay slot. */
+				tmp = get_reg(child, PT_ERP) & ~1;
+				put_reg(child, PT_SPC, tmp);
+			}
+			tmp = get_reg(child, PT_CCS) | SBIT_USER;
+			put_reg(child, PT_CCS, tmp);
+
+			if (!valid_signal(data))
+				break;
+
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+			/* TODO: set some clever breakpoint mechanism... */
+
+			child->exit_code = data;
+			wake_up_process(child);
+			ret = 0;
+			break;
+
+		}
+		case PTRACE_DETACH:
+			ret = ptrace_detach(child, data);
+			break;
+
+		/* Get all GP registers from the child. */
+		case PTRACE_GETREGS: {
+		  	int i;
+			unsigned long tmp;
+
+			for (i = 0; i <= PT_MAX; i++) {
+				tmp = get_reg(child, i);
+
+				if (put_user(tmp, datap)) {
+					ret = -EFAULT;
+					goto out_tsk;
+				}
+
+				datap++;
+			}
+
+			ret = 0;
+			break;
+		}
+
+		/* Set all GP registers in the child. */
+		case PTRACE_SETREGS: {
+			int i;
+			unsigned long tmp;
+
+			for (i = 0; i <= PT_MAX; i++) {
+				if (get_user(tmp, datap)) {
+					ret = -EFAULT;
+					goto out_tsk;
+				}
+
+				if (i == PT_CCS) {
+					tmp &= CCS_MASK;
+					tmp |= get_reg(child, PT_CCS) & ~CCS_MASK;
+				}
+
+				put_reg(child, i, tmp);
+				datap++;
+			}
+
+			ret = 0;
+			break;
+		}
+
+		default:
+			ret = ptrace_request(child, request, addr, data);
+			break;
+	}
+out_tsk:
+	put_task_struct(child);
+out:
+	unlock_kernel();
+	return ret;
+}
+
+void do_syscall_trace(void)
+{
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+
+	/*
+	 * This isn't the same as continuing with a signal, but it will do for
+	 * normal use.
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+/* Returns the size of an instruction that has a delay slot. */
+
+static int insn_size(struct task_struct *child, unsigned long pc)
+{
+  unsigned long opcode;
+  int copied;
+  int opsize = 0;
+
+  /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */
+  copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0);
+  if (copied != sizeof(opcode))
+    return 0;
+
+  switch ((opcode & 0x0f00) >> 8) {
+  case 0x0:
+  case 0x9:
+  case 0xb:
+	  opsize = 2;
+	  break;
+  case 0xe:
+  case 0xf:
+	  opsize = 6;
+	  break;
+  case 0xd:
+	  /* Could be 4 or 6; check more bits. */
+	  if ((opcode & 0xff) == 0xff)
+		  opsize = 4;
+	  else
+		  opsize = 6;
+	  break;
+  default:
+	  panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n",
+		opcode, pc);
+  }
+
+  return opsize;
+}
+
+static unsigned long get_pseudo_pc(struct task_struct *child)
+{
+	/* Default value for PC is ERP. */
+	unsigned long pc = get_reg(child, PT_ERP);
+
+	if (pc & 0x1) {
+		unsigned long spc = get_reg(child, PT_SPC);
+		/* Delay slot bit set. Report as stopped on proper
+		   instruction. */
+		if (spc) {
+			/* Rely on SPC if set. FIXME: We might want to check
+			   that EXS indicates we stopped due to a single-step
+			   exception. */
+			pc = spc;
+		} else {
+			/* Calculate the PC from the size of the instruction
+			   that the delay slot we're in belongs to. */
+			pc += insn_size(child, pc & ~1) - 1;
+		}
+	}
+	return pc;
+}
+
+static long bp_owner = 0;
+
+/* Reachable from exit_thread in signal.c, so not static. */
+void deconfigure_bp(long pid)
+{
+	int bp;
+
+	/* Only deconfigure if the pid is the owner. */
+	if (bp_owner != pid)
+		return;
+
+	for (bp = 0; bp < 6; bp++) {
+		unsigned long tmp;
+		/* Deconfigure start and end address (also gets rid of ownership). */
+		put_debugreg(pid, PT_BP + 3 + (bp * 2), 0);
+		put_debugreg(pid, PT_BP + 4 + (bp * 2), 0);
+
+		/* Deconfigure relevant bits in control register. */
+		tmp = get_debugreg(pid, PT_BP_CTRL) & ~(3 << (2 + (bp * 4)));
+		put_debugreg(pid, PT_BP_CTRL, tmp);
+	}
+	/* No owner now. */
+	bp_owner = 0;
+}
+
+static int put_debugreg(long pid, unsigned int regno, long data)
+{
+	int ret = 0;
+	register int old_srs;
+
+#ifdef CONFIG_ETRAX_KGDB
+	/* Ignore write, but pretend it was ok if value is 0
+	   (we don't want POKEUSR/SETREGS failing unnessecarily). */
+	return (data == 0) ? ret : -1;
+#endif
+
+	/* Simple owner management. */
+	if (!bp_owner)
+		bp_owner = pid;
+	else if (bp_owner != pid) {
+		/* Ignore write, but pretend it was ok if value is 0
+		   (we don't want POKEUSR/SETREGS failing unnessecarily). */
+		return (data == 0) ? ret : -1;
+	}
+
+	/* Remember old SRS. */
+	SPEC_REG_RD(SPEC_REG_SRS, old_srs);
+	/* Switch to BP bank. */
+	SUPP_BANK_SEL(BANK_BP);
+
+	switch (regno - PT_BP) {
+	case 0:
+		SUPP_REG_WR(0, data); break;
+	case 1:
+	case 2:
+		if (data)
+			ret = -1;
+		break;
+	case 3:
+		SUPP_REG_WR(3, data); break;
+	case 4:
+		SUPP_REG_WR(4, data); break;
+	case 5:
+		SUPP_REG_WR(5, data); break;
+	case 6:
+		SUPP_REG_WR(6, data); break;
+	case 7:
+		SUPP_REG_WR(7, data); break;
+	case 8:
+		SUPP_REG_WR(8, data); break;
+	case 9:
+		SUPP_REG_WR(9, data); break;
+	case 10:
+		SUPP_REG_WR(10, data); break;
+	case 11:
+		SUPP_REG_WR(11, data); break;
+	case 12:
+		SUPP_REG_WR(12, data); break;
+	case 13:
+		SUPP_REG_WR(13, data); break;
+	case 14:
+		SUPP_REG_WR(14, data); break;
+	default:
+		ret = -1;
+		break;
+	}
+
+	/* Restore SRS. */
+	SPEC_REG_WR(SPEC_REG_SRS, old_srs);
+	/* Just for show. */
+	NOP();
+	NOP();
+	NOP();
+
+	return ret;
+}
+
+static long get_debugreg(long pid, unsigned int regno)
+{
+	register int old_srs;
+	register long data;
+
+	if (pid != bp_owner) {
+		return 0;
+	}
+
+	/* Remember old SRS. */
+	SPEC_REG_RD(SPEC_REG_SRS, old_srs);
+	/* Switch to BP bank. */
+	SUPP_BANK_SEL(BANK_BP);
+
+	switch (regno - PT_BP) {
+	case 0:
+		SUPP_REG_RD(0, data); break;
+	case 1:
+	case 2:
+		/* error return value? */
+		data = 0;
+		break;
+	case 3:
+		SUPP_REG_RD(3, data); break;
+	case 4:
+		SUPP_REG_RD(4, data); break;
+	case 5:
+		SUPP_REG_RD(5, data); break;
+	case 6:
+		SUPP_REG_RD(6, data); break;
+	case 7:
+		SUPP_REG_RD(7, data); break;
+	case 8:
+		SUPP_REG_RD(8, data); break;
+	case 9:
+		SUPP_REG_RD(9, data); break;
+	case 10:
+		SUPP_REG_RD(10, data); break;
+	case 11:
+		SUPP_REG_RD(11, data); break;
+	case 12:
+		SUPP_REG_RD(12, data); break;
+	case 13:
+		SUPP_REG_RD(13, data); break;
+	case 14:
+		SUPP_REG_RD(14, data); break;
+	default:
+		/* error return value? */
+		data = 0;
+	}
+
+	/* Restore SRS. */
+	SPEC_REG_WR(SPEC_REG_SRS, old_srs);
+	/* Just for show. */
+	NOP();
+	NOP();
+	NOP();
+
+	return data;
+}

arch/cris/arch-v32/kernel/setup.c

@@ -0,0 +1,118 @@
+/*
+ * Display CPU info in /proc/cpuinfo.
+ *
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+
+#ifdef CONFIG_PROC_FS
+
+#define HAS_FPU         0x0001
+#define HAS_MMU         0x0002
+#define HAS_ETHERNET100 0x0004
+#define HAS_TOKENRING   0x0008
+#define HAS_SCSI        0x0010
+#define HAS_ATA         0x0020
+#define HAS_USB         0x0040
+#define HAS_IRQ_BUG     0x0080
+#define HAS_MMU_BUG     0x0100
+
+struct cpu_info {
+	char *cpu_model;
+	unsigned short rev;
+	unsigned short cache_size;
+	unsigned short flags;
+};
+
+/* Some of these model are here for historical reasons only. */
+static struct cpu_info cpinfo[] = {
+	{"ETRAX 1", 0, 0, 0},
+	{"ETRAX 2", 1, 0, 0},
+	{"ETRAX 3", 2, 0, 0},
+	{"ETRAX 4", 3, 0, 0},
+	{"Simulator", 7, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA},
+	{"ETRAX 100", 8, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG},
+	{"ETRAX 100", 9, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA},
+
+	{"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
+			     | HAS_MMU | HAS_MMU_BUG},
+
+	{"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
+			        | HAS_MMU},
+
+	{"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
+
+	{"Unknown", 0, 0, 0}
+};
+
+int
+show_cpuinfo(struct seq_file *m, void *v)
+{
+	int i;
+	int cpu = (int)v - 1;
+	int entries;
+	unsigned long revision;
+	struct cpu_info *info;
+
+	entries = sizeof cpinfo / sizeof(struct cpu_info);
+	info = &cpinfo[entries - 1];
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(cpu))
+		return 0;
+#endif
+
+	revision = rdvr();
+
+	for (i = 0; i < entries; i++) {
+		if (cpinfo[i].rev == revision) {
+			info = &cpinfo[i];
+			break;
+		}
+	}
+
+	return seq_printf(m,
+		"processor\t: %d\n"
+		"cpu\t\t: CRIS\n"
+		"cpu revision\t: %lu\n"
+		"cpu model\t: %s\n"
+		"cache size\t: %d KB\n"
+		"fpu\t\t: %s\n"
+		"mmu\t\t: %s\n"
+		"mmu DMA bug\t: %s\n"
+		"ethernet\t: %s Mbps\n"
+		"token ring\t: %s\n"
+		"scsi\t\t: %s\n"
+		"ata\t\t: %s\n"
+		"usb\t\t: %s\n"
+		"bogomips\t: %lu.%02lu\n\n",
+
+		cpu,
+		revision,
+		info->cpu_model,
+		info->cache_size,
+		info->flags & HAS_FPU ? "yes" : "no",
+		info->flags & HAS_MMU ? "yes" : "no",
+		info->flags & HAS_MMU_BUG ? "yes" : "no",
+		info->flags & HAS_ETHERNET100 ? "10/100" : "10",
+		info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no",
+		info->flags & HAS_SCSI ? "yes" : "no",
+		info->flags & HAS_ATA ? "yes" : "no",
+		info->flags & HAS_USB ? "yes" : "no",
+		(loops_per_jiffy * HZ + 500) / 500000,
+		((loops_per_jiffy * HZ + 500) / 5000) % 100);
+}
+
+#endif /* CONFIG_PROC_FS */
+
+void
+show_etrax_copyright(void)
+{
+	printk(KERN_INFO
+               "Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n");
+}

arch/cris/arch-v32/kernel/signal.c

@@ -0,0 +1,708 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/syscalls.h>
+#include <linux/vmalloc.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/arch/ptrace.h>
+#include <asm/arch/hwregs/cpu_vect.h>
+
+extern unsigned long cris_signal_return_page;
+
+/* Flag to check if a signal is blockable. */
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * A syscall in CRIS is really a "break 13" instruction, which is 2
+ * bytes. The registers is manipulated so upon return the instruction
+ * will be executed again.
+ *
+ * This relies on that PC points to the instruction after the break call.
+ */
+#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->erp -= 2;
+
+/* Signal frames. */
+struct signal_frame {
+	struct sigcontext sc;
+	unsigned long extramask[_NSIG_WORDS - 1];
+	unsigned char retcode[8];	/* Trampoline code. */
+};
+
+struct rt_signal_frame {
+	struct siginfo *pinfo;
+	void *puc;
+	struct siginfo info;
+	struct ucontext uc;
+	unsigned char retcode[8];	/* Trampoline code. */
+};
+
+int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs);
+void keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
+		      struct pt_regs *regs);
+/*
+ * Swap in the new signal mask, and wait for a signal. Define some
+ * dummy arguments to be able to reach the regs argument.
+ */
+int
+sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
+	       long srp, struct pt_regs *regs)
+{
+	sigset_t saveset;
+
+	mask &= _BLOCKABLE;
+
+	spin_lock_irq(&current->sighand->siglock);
+
+	saveset = current->blocked;
+
+	siginitset(&current->blocked, mask);
+
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->r10 = -EINTR;
+
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+
+		if (do_signal(0, &saveset, regs)) {
+			/*
+			 * This point is reached twice: once to call
+			 * the signal handler, then again to return
+			 * from the sigsuspend system call. When
+			 * calling the signal handler, R10 hold the
+			 * signal number as set by do_signal(). The
+			 * sigsuspend  call will always return with
+			 * the restored value above; -EINTR.
+			 */
+			return regs->r10;
+		}
+	}
+}
+
+/* Define some dummy arguments to be able to reach the regs argument. */
+int
+sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
+		  long mof, long srp, struct pt_regs *regs)
+{
+	sigset_t saveset;
+	sigset_t newset;
+
+	if (sigsetsize != sizeof(sigset_t))
+		return -EINVAL;
+
+	if (copy_from_user(&newset, unewset, sizeof(newset)))
+		return -EFAULT;
+
+	sigdelsetmask(&newset, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+
+	saveset = current->blocked;
+	current->blocked = newset;
+
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	regs->r10 = -EINTR;
+
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		schedule();
+
+		if (do_signal(0, &saveset, regs)) {
+			/* See comment in function above. */
+			return regs->r10;
+		}
+	}
+}
+
+int
+sys_sigaction(int signal, const struct old_sigaction *act,
+	      struct old_sigaction *oact)
+{
+	int retval;
+	struct k_sigaction newk;
+	struct k_sigaction oldk;
+
+	if (act) {
+		old_sigset_t mask;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(newk.sa.sa_handler, &act->sa_handler) ||
+		    __get_user(newk.sa.sa_restorer, &act->sa_restorer))
+			return -EFAULT;
+
+		__get_user(newk.sa.sa_flags, &act->sa_flags);
+		__get_user(mask, &act->sa_mask);
+		siginitset(&newk.sa.sa_mask, mask);
+	}
+
+	retval = do_sigaction(signal, act ? &newk : NULL, oact ? &oldk : NULL);
+
+	if (!retval && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(oldk.sa.sa_handler, &oact->sa_handler) ||
+		    __put_user(oldk.sa.sa_restorer, &oact->sa_restorer))
+			return -EFAULT;
+
+		__put_user(oldk.sa.sa_flags, &oact->sa_flags);
+		__put_user(oldk.sa.sa_mask.sig[0], &oact->sa_mask);
+	}
+
+	return retval;
+}
+
+int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+{
+	return do_sigaltstack(uss, uoss, rdusp());
+}
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	unsigned int err = 0;
+	unsigned long old_usp;
+
+        /* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Restore the registers from &sc->regs. sc is already checked
+	 * for VERIFY_READ since the signal_frame was previously
+	 * checked in sys_sigreturn().
+	 */
+	if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
+		goto badframe;
+
+	/* Make that the user-mode flag is set. */
+	regs->ccs |= (1 << (U_CCS_BITNR + CCS_SHIFT));
+
+	/* Restore the old USP. */
+	err |= __get_user(old_usp, &sc->usp);
+	wrusp(old_usp);
+
+	return err;
+
+badframe:
+	return 1;
+}
+
+/* Define some dummy arguments to be able to reach the regs argument. */
+asmlinkage int
+sys_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
+	      struct pt_regs *regs)
+{
+	sigset_t set;
+	struct signal_frame __user *frame;
+	unsigned long oldspc = regs->spc;
+	unsigned long oldccs = regs->ccs;
+
+	frame = (struct signal_frame *) rdusp();
+
+	/*
+	 * Since the signal is stacked on a dword boundary, the frame
+	 * should be dword aligned here as well. It it's not, then the
+	 * user is trying some funny business.
+	 */
+	if (((long)frame) & 3)
+		goto badframe;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__get_user(set.sig[0], &frame->sc.oldmask) ||
+	    (_NSIG_WORDS > 1 && __copy_from_user(&set.sig[1],
+						 frame->extramask,
+						 sizeof(frame->extramask))))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+
+	current->blocked = set;
+
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->sc))
+		goto badframe;
+
+	keep_debug_flags(oldccs, oldspc, regs);
+
+	return regs->r10;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/* Define some dummy variables to be able to reach the regs argument. */
+asmlinkage int
+sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
+		 struct pt_regs *regs)
+{
+	sigset_t set;
+	struct rt_signal_frame __user *frame;
+	unsigned long oldspc = regs->spc;
+	unsigned long oldccs = regs->ccs;
+
+	frame = (struct rt_signal_frame *) rdusp();
+
+	/*
+	 * Since the signal is stacked on a dword boundary, the frame
+	 * should be dword aligned here as well. It it's not, then the
+	 * user is trying some funny business.
+	 */
+	if (((long)frame) & 3)
+		goto badframe;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+
+	current->blocked = set;
+
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
+ 		goto badframe;
+
+	keep_debug_flags(oldccs, oldspc, regs);
+
+	return regs->r10;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/* Setup a signal frame. */
+static int
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+		 unsigned long mask)
+{
+	int err;
+	unsigned long usp;
+
+	err = 0;
+	usp = rdusp();
+
+	/*
+	 * Copy the registers. They are located first in sc, so it's
+	 * possible to use sc directly.
+	 */
+	err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
+
+	err |= __put_user(mask, &sc->oldmask);
+	err |= __put_user(usp, &sc->usp);
+
+	return err;
+}
+
+/* Figure out where to put the new signal frame - usually on the stack. */
+static inline void __user *
+get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+{
+	unsigned long sp;
+
+	sp = rdusp();
+
+	/* This is the X/Open sanctioned signal stack switching. */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (!on_sig_stack(sp))
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	/* Make sure the frame is dword-aligned. */
+	sp &= ~3;
+
+	return (void __user *)(sp - frame_size);
+}
+
+/* Grab and setup a signal frame.
+ *
+ * Basically a lot of state-info is stacked, and arranged for the
+ * user-mode program to return to the kernel using either a trampiline
+ * which performs the syscall sigreturn(), or a provided user-mode
+ * trampoline.
+  */
+static void
+setup_frame(int sig, struct k_sigaction *ka,  sigset_t *set,
+	    struct pt_regs * regs)
+{
+	int err;
+	unsigned long return_ip;
+	struct signal_frame __user *frame;
+
+	err = 0;
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+	if (err)
+		goto give_sigsegv;
+
+	if (_NSIG_WORDS > 1) {
+		err |= __copy_to_user(frame->extramask, &set->sig[1],
+				      sizeof(frame->extramask));
+	}
+
+	if (err)
+		goto give_sigsegv;
+
+	/*
+	 * Set up to return from user-space. If provided, use a stub
+	 * already located in user-space.
+	 */
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		return_ip = (unsigned long)ka->sa.sa_restorer;
+	} else {
+		/* Trampoline - the desired return ip is in the signal return page. */
+		return_ip = cris_signal_return_page;
+
+		/*
+		 * This is movu.w __NR_sigreturn, r9; break 13;
+		 *
+		 * WE DO NOT USE IT ANY MORE! It's only left here for historical
+		 * reasons and because gdb uses it as a signature to notice
+		 * signal handler stack frames.
+		 */
+		err |= __put_user(0x9c5f,         (short __user*)(frame->retcode+0));
+		err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2));
+		err |= __put_user(0xe93d,         (short __user*)(frame->retcode+4));
+	}
+
+	if (err)
+		goto give_sigsegv;
+
+	/*
+	 * Set up registers for signal handler.
+	 *
+	 * Where the code enters now.
+	 * Where the code enter later.
+	 * First argument, signo.
+	 */
+	regs->erp = (unsigned long) ka->sa.sa_handler;
+	regs->srp = return_ip;
+	regs->r10 = sig;
+
+	/* Actually move the USP to reflect the stacked frame. */
+	wrusp((unsigned long)frame);
+
+	return;
+
+give_sigsegv:
+	if (sig == SIGSEGV)
+		ka->sa.sa_handler = SIG_DFL;
+
+	force_sig(SIGSEGV, current);
+}
+
+static void
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+	       sigset_t *set, struct pt_regs * regs)
+{
+	int err;
+	unsigned long return_ip;
+	struct rt_signal_frame __user *frame;
+
+	err = 0;
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	/* TODO: what is the current->exec_domain stuff and invmap ? */
+
+	err |= __put_user(&frame->info, &frame->pinfo);
+	err |= __put_user(&frame->uc, &frame->puc);
+	err |= copy_siginfo_to_user(&frame->info, info);
+
+	if (err)
+		goto give_sigsegv;
+
+	/* Clear all the bits of the ucontext we don't use.  */
+	err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		goto give_sigsegv;
+
+	/*
+	 * Set up to return from user-space. If provided, use a stub
+	 * already located in user-space.
+	 */
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		return_ip = (unsigned long) ka->sa.sa_restorer;
+	} else {
+		/* Trampoline - the desired return ip is in the signal return page. */
+		return_ip = cris_signal_return_page + 6;
+
+		/*
+		 * This is movu.w __NR_rt_sigreturn, r9; break 13;
+		 *
+		 * WE DO NOT USE IT ANY MORE! It's only left here for historical
+		 * reasons and because gdb uses it as a signature to notice
+		 * signal handler stack frames.
+		 */
+		err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
+
+		err |= __put_user(__NR_rt_sigreturn,
+				  (short __user*)(frame->retcode+2));
+
+		err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
+	}
+
+	if (err)
+		goto give_sigsegv;
+
+	/*
+	 * Set up registers for signal handler.
+	 *
+	 * Where the code enters now.
+	 * Where the code enters later.
+	 * First argument is signo.
+	 * Second argument is (siginfo_t *).
+	 * Third argument is unused.
+	 */
+	regs->erp = (unsigned long) ka->sa.sa_handler;
+	regs->srp = return_ip;
+	regs->r10 = sig;
+	regs->r11 = (unsigned long) &frame->info;
+	regs->r12 = 0;
+
+	/* Actually move the usp to reflect the stacked frame. */
+	wrusp((unsigned long)frame);
+
+	return;
+
+give_sigsegv:
+	if (sig == SIGSEGV)
+		ka->sa.sa_handler = SIG_DFL;
+
+	force_sig(SIGSEGV, current);
+}
+
+/* Invoke a singal handler to, well, handle the signal. */
+extern inline void
+handle_signal(int canrestart, unsigned long sig,
+	      siginfo_t *info, struct k_sigaction *ka,
+              sigset_t *oldset, struct pt_regs * regs)
+{
+	/* Check if this got called from a system call. */
+	if (canrestart) {
+		/* If so, check system call restarting. */
+		switch (regs->r10) {
+			case -ERESTART_RESTARTBLOCK:
+			case -ERESTARTNOHAND:
+				/*
+				 * This means that the syscall should
+				 * only be restarted if there was no
+				 * handler for the signal, and since
+				 * this point isn't reached unless
+				 * there is a handler, there's no need
+				 * to restart.
+				 */
+				regs->r10 = -EINTR;
+				break;
+
+                        case -ERESTARTSYS:
+				/*
+				 * This means restart the syscall if
+                                 * there is no handler, or the handler
+                                 * was registered with SA_RESTART.
+				 */
+				if (!(ka->sa.sa_flags & SA_RESTART)) {
+					regs->r10 = -EINTR;
+					break;
+				}
+
+				/* Fall through. */
+
+			case -ERESTARTNOINTR:
+				/*
+				 * This means that the syscall should
+                                 * be called again after the signal
+                                 * handler returns.
+				 */
+				RESTART_CRIS_SYS(regs);
+				break;
+                }
+        }
+
+	/* Set up the stack frame. */
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		setup_rt_frame(sig, ka, info, oldset, regs);
+	else
+		setup_frame(sig, ka, oldset, regs);
+
+	if (ka->sa.sa_flags & SA_ONESHOT)
+		ka->sa.sa_handler = SIG_DFL;
+
+	if (!(ka->sa.sa_flags & SA_NODEFER)) {
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
+		sigaddset(&current->blocked,sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Also note that the regs structure given here as an argument, is the latest
+ * pushed pt_regs. It may or may not be the same as the first pushed registers
+ * when the initial usermode->kernelmode transition took place. Therefore
+ * we can use user_mode(regs) to see if we came directly from kernel or user
+ * mode below.
+ */
+int
+do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
+{
+	int signr;
+	siginfo_t info;
+        struct k_sigaction ka;
+
+	/*
+	 * The common case should go fast, which is why this point is
+	 * reached from kernel-mode. If that's the case, just return
+	 * without doing anything.
+	 */
+	if (!user_mode(regs))
+		return 1;
+
+	if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+
+	if (signr > 0) {
+		/* Deliver the signal. */
+		handle_signal(canrestart, signr, &info, &ka, oldset, regs);
+		return 1;
+	}
+
+	/* Got here from a system call? */
+	if (canrestart) {
+		/* Restart the system call - no handlers present. */
+		if (regs->r10 == -ERESTARTNOHAND ||
+		    regs->r10 == -ERESTARTSYS ||
+		    regs->r10 == -ERESTARTNOINTR) {
+			RESTART_CRIS_SYS(regs);
+		}
+
+		if (regs->r10 == -ERESTART_RESTARTBLOCK){
+			regs->r10 = __NR_restart_syscall;
+			regs->erp -= 2;
+		}
+	}
+
+	return 0;
+}
+
+asmlinkage void
+ugdb_trap_user(struct thread_info *ti, int sig)
+{
+	if (((user_regs(ti)->exs & 0xff00) >> 8) != SINGLE_STEP_INTR_VECT) {
+		/* Zero single-step PC if the reason we stopped wasn't a single
+		   step exception. This is to avoid relying on it when it isn't
+		   reliable. */
+		user_regs(ti)->spc = 0;
+	}
+	/* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
+	   not withing any configured h/w breakpoint range). Synchronize with
+	   what already exists for kernel debugging.  */
+	if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
+		/* Break 8: subtract 2 from ERP unless in a delay slot. */
+		if (!(user_regs(ti)->erp & 0x1))
+			user_regs(ti)->erp -= 2;
+	}
+	sys_kill(ti->task->pid, sig);
+}
+
+void
+keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
+		 struct pt_regs *regs)
+{
+	if (oldccs & (1 << Q_CCS_BITNR)) {
+		/* Pending single step due to single-stepping the break 13
+		   in the signal trampoline: keep the Q flag. */
+		regs->ccs |= (1 << Q_CCS_BITNR);
+		/* S flag should be set - complain if it's not. */
+		if (!(oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT)))) {
+			printk("Q flag but no S flag?");
+		}
+		regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
+		/* Assume the SPC is valid and interesting. */
+		regs->spc = oldspc;
+
+	} else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) {
+		/* If a h/w bp was set in the signal handler we need
+		   to keep the S flag. */
+		regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
+		/* Don't keep the old SPC though; if we got here due to
+		   a single-step, the Q flag should have been set. */
+	} else if (regs->spc) {
+		/* If we were single-stepping *before* the signal was taken,
+		   we don't want to restore that state now, because GDB will
+		   have forgotten all about it. */
+		regs->spc = 0;
+		regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
+	}
+}
+
+/* Set up the trampolines on the signal return page. */
+int __init
+cris_init_signal(void)
+{
+	u16* data = (u16*)kmalloc(PAGE_SIZE, GFP_KERNEL);
+
+	/* This is movu.w __NR_sigreturn, r9; break 13; */
+	data[0] = 0x9c5f;
+	data[1] = __NR_sigreturn;
+	data[2] = 0xe93d;
+	/* This is movu.w __NR_rt_sigreturn, r9; break 13; */
+	data[3] = 0x9c5f;
+	data[4] = __NR_rt_sigreturn;
+	data[5] = 0xe93d;
+
+	/* Map to userspace with appropriate permissions (no write access...) */
+	cris_signal_return_page = (unsigned long)
+          __ioremap_prot(virt_to_phys(data), PAGE_SIZE, PAGE_SIGNAL_TRAMPOLINE);
+
+	return 0;
+}
+
+__initcall(cris_init_signal);

arch/cris/arch-v32/kernel/smp.c

@@ -0,0 +1,348 @@
+#include <asm/delay.h>
+#include <asm/arch/irq.h>
+#include <asm/arch/hwregs/intr_vect.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/arch/hwregs/mmu_defs_asm.h>
+#include <asm/arch/hwregs/supp_reg.h>
+#include <asm/atomic.h>
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#define IPI_SCHEDULE 1
+#define IPI_CALL 2
+#define IPI_FLUSH_TLB 4
+
+#define FLUSH_ALL (void*)0xffffffff
+
+/* Vector of locks used for various atomic operations */
+spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED};
+
+/* CPU masks */
+cpumask_t cpu_online_map = CPU_MASK_NONE;
+cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+
+/* Variables used during SMP boot */
+volatile int cpu_now_booting = 0;
+volatile struct thread_info *smp_init_current_idle_thread;
+
+/* Variables used during IPI */
+static DEFINE_SPINLOCK(call_lock);
+static DEFINE_SPINLOCK(tlbstate_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	int wait;
+};
+
+static struct call_data_struct * call_data;
+
+static struct mm_struct* flush_mm;
+static struct vm_area_struct* flush_vma;
+static unsigned long flush_addr;
+
+extern int setup_irq(int, struct irqaction *);
+
+/* Mode registers */
+static unsigned long irq_regs[NR_CPUS] =
+{
+  regi_irq,
+  regi_irq2
+};
+
+static irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int send_ipi(int vector, int wait, cpumask_t cpu_mask);
+static struct irqaction irq_ipi  = { crisv32_ipi_interrupt, SA_INTERRUPT,
+                                     CPU_MASK_NONE, "ipi", NULL, NULL};
+
+extern void cris_mmu_init(void);
+extern void cris_timer_init(void);
+
+/* SMP initialization */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
+
+	/* From now on we can expect IPIs so set them up */
+	setup_irq(IPI_INTR_VECT, &irq_ipi);
+
+	/* Mark all possible CPUs as present */
+	for (i = 0; i < max_cpus; i++)
+	    cpu_set(i, phys_cpu_present_map);
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+	/* PGD pointer has moved after per_cpu initialization so
+	 * update the MMU.
+	 */
+  	pgd_t **pgd;
+	pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id());
+
+	SUPP_BANK_SEL(1);
+	SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
+	SUPP_BANK_SEL(2);
+	SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
+
+	cpu_set(0, cpu_online_map);
+	cpu_set(0, phys_cpu_present_map);
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+}
+
+/* Bring one cpu online.*/
+static int __init
+smp_boot_one_cpu(int cpuid)
+{
+	unsigned timeout;
+	struct task_struct *idle;
+
+	idle = fork_idle(cpuid);
+	if (IS_ERR(idle))
+		panic("SMP: fork failed for CPU:%d", cpuid);
+
+	idle->thread_info->cpu = cpuid;
+
+	/* Information to the CPU that is about to boot */
+	smp_init_current_idle_thread = idle->thread_info;
+	cpu_now_booting = cpuid;
+
+	/* Wait for CPU to come online */
+	for (timeout = 0; timeout < 10000; timeout++) {
+		if(cpu_online(cpuid)) {
+			cpu_now_booting = 0;
+			smp_init_current_idle_thread = NULL;
+			return 0; /* CPU online */
+		}
+		udelay(100);
+		barrier();
+	}
+
+	put_task_struct(idle);
+	idle = NULL;
+
+	printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid);
+	return -1;
+}
+
+/* Secondary CPUs starts uing C here. Here we need to setup CPU
+ * specific stuff such as the local timer and the MMU. */
+void __init smp_callin(void)
+{
+	extern void cpu_idle(void);
+
+	int cpu = cpu_now_booting;
+	reg_intr_vect_rw_mask vect_mask = {0};
+
+	/* Initialise the idle task for this CPU */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+
+	/* Set up MMU */
+	cris_mmu_init();
+	__flush_tlb_all();
+
+	/* Setup local timer. */
+	cris_timer_init();
+
+	/* Enable IRQ and idle */
+	REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
+	unmask_irq(IPI_INTR_VECT);
+	unmask_irq(TIMER_INTR_VECT);
+	local_irq_enable();
+
+	cpu_set(cpu, cpu_online_map);
+	cpu_idle();
+}
+
+/* Stop execution on this CPU.*/
+void stop_this_cpu(void* dummy)
+{
+	local_irq_disable();
+	asm volatile("halt");
+}
+
+/* Other calls */
+void smp_send_stop(void)
+{
+	smp_call_function(stop_this_cpu, NULL, 1, 0);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return -EINVAL;
+}
+
+
+/* cache_decay_ticks is used by the scheduler to decide if a process
+ * is "hot" on one CPU. A higher value means a higher penalty to move
+ * a process to another CPU. Our cache is rather small so we report
+ * 1 tick.
+ */
+unsigned long cache_decay_ticks = 1;
+
+int __devinit __cpu_up(unsigned int cpu)
+{
+	smp_boot_one_cpu(cpu);
+	return cpu_online(cpu) ? 0 : -ENOSYS;
+}
+
+void smp_send_reschedule(int cpu)
+{
+	cpumask_t cpu_mask = CPU_MASK_NONE;
+	cpu_set(cpu, cpu_mask);
+	send_ipi(IPI_SCHEDULE, 0, cpu_mask);
+}
+
+/* TLB flushing
+ *
+ * Flush needs to be done on the local CPU and on any other CPU that
+ * may have the same mapping. The mm->cpu_vm_mask is used to keep track
+ * of which CPUs that a specific process has been executed on.
+ */
+void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr)
+{
+	unsigned long flags;
+	cpumask_t cpu_mask;
+
+	spin_lock_irqsave(&tlbstate_lock, flags);
+	cpu_mask = (mm == FLUSH_ALL ? CPU_MASK_ALL : mm->cpu_vm_mask);
+	cpu_clear(smp_processor_id(), cpu_mask);
+	flush_mm = mm;
+	flush_vma = vma;
+	flush_addr = addr;
+	send_ipi(IPI_FLUSH_TLB, 1, cpu_mask);
+	spin_unlock_irqrestore(&tlbstate_lock, flags);
+}
+
+void flush_tlb_all(void)
+{
+	__flush_tlb_all();
+	flush_tlb_common(FLUSH_ALL, FLUSH_ALL, 0);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	__flush_tlb_mm(mm);
+	flush_tlb_common(mm, FLUSH_ALL, 0);
+	/* No more mappings in other CPUs */
+	cpus_clear(mm->cpu_vm_mask);
+	cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma,
+			   unsigned long addr)
+{
+	__flush_tlb_page(vma, addr);
+	flush_tlb_common(vma->vm_mm, vma, addr);
+}
+
+/* Inter processor interrupts
+ *
+ * The IPIs are used for:
+ *   * Force a schedule on a CPU
+ *   * FLush TLB on other CPUs
+ *   * Call a function on other CPUs
+ */
+
+int send_ipi(int vector, int wait, cpumask_t cpu_mask)
+{
+	int i = 0;
+	reg_intr_vect_rw_ipi ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi);
+	int ret = 0;
+
+	/* Calculate CPUs to send to. */
+	cpus_and(cpu_mask, cpu_mask, cpu_online_map);
+
+	/* Send the IPI. */
+	for_each_cpu_mask(i, cpu_mask)
+	{
+		ipi.vector |= vector;
+		REG_WR(intr_vect, irq_regs[i], rw_ipi, ipi);
+	}
+
+	/* Wait for IPI to finish on other CPUS */
+	if (wait) {
+		for_each_cpu_mask(i, cpu_mask) {
+                        int j;
+                        for (j = 0 ; j < 1000; j++) {
+				ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi);
+				if (!ipi.vector)
+					break;
+				udelay(100);
+			}
+
+			/* Timeout? */
+			if (ipi.vector) {
+				printk("SMP call timeout from %d to %d\n", smp_processor_id(), i);
+				ret = -ETIMEDOUT;
+				dump_stack();
+			}
+		}
+	}
+	return ret;
+}
+
+/*
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function(void (*func)(void *info), void *info,
+		      int nonatomic, int wait)
+{
+	cpumask_t cpu_mask = CPU_MASK_ALL;
+	struct call_data_struct data;
+	int ret;
+
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	data.wait = wait;
+
+	spin_lock(&call_lock);
+	call_data = &data;
+	ret = send_ipi(IPI_CALL, wait, cpu_mask);
+	spin_unlock(&call_lock);
+
+	return ret;
+}
+
+irqreturn_t crisv32_ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	reg_intr_vect_rw_ipi ipi;
+
+	ipi = REG_RD(intr_vect, irq_regs[smp_processor_id()], rw_ipi);
+
+	if (ipi.vector & IPI_CALL) {
+	         func(info);
+	}
+	if (ipi.vector & IPI_FLUSH_TLB) {
+		     if (flush_mm == FLUSH_ALL)
+			 __flush_tlb_all();
+		     else if (flush_vma == FLUSH_ALL)
+			__flush_tlb_mm(flush_mm);
+		     else
+			__flush_tlb_page(flush_vma, flush_addr);
+	}
+
+	ipi.vector = 0;
+	REG_WR(intr_vect, irq_regs[smp_processor_id()], rw_ipi, ipi);
+
+	return IRQ_HANDLED;
+}
+

arch/cris/arch-v32/kernel/time.c

@@ -0,0 +1,341 @@
+/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $
+ *
+ *  linux/arch/cris/arch-v32/kernel/time.c
+ *
+ *  Copyright (C) 2003 Axis Communications AB
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/swap.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/rtc.h>
+#include <asm/irq.h>
+
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/timer_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+
+/* Watchdog defines */
+#define ETRAX_WD_KEY_MASK 0x7F /* key is 7 bit */
+#define ETRAX_WD_HZ       763 /* watchdog counts at 763 Hz */
+#define ETRAX_WD_CNT      ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */
+
+unsigned long timer_regs[NR_CPUS] =
+{
+  regi_timer,
+#ifdef CONFIG_SMP
+  regi_timer2
+#endif
+};
+
+extern void update_xtime_from_cmos(void);
+extern int set_rtc_mmss(unsigned long nowtime);
+extern int setup_irq(int, struct irqaction *);
+extern int have_rtc;
+
+unsigned long get_ns_in_jiffie(void)
+{
+	reg_timer_r_tmr0_data data;
+	unsigned long ns;
+
+	data = REG_RD(timer, regi_timer, r_tmr0_data);
+	ns = (TIMER0_DIV - data) * 10;
+	return ns;
+}
+
+unsigned long do_slow_gettimeoffset(void)
+{
+	unsigned long count;
+	unsigned long usec_count = 0;
+
+	static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
+	static unsigned long jiffies_p = 0;
+
+	/*
+	 * cache volatile jiffies temporarily; we have IRQs turned off.
+	 */
+	unsigned long jiffies_t;
+
+	/* The timer interrupt comes from Etrax timer 0. In order to get
+	 * better precision, we check the current value. It might have
+	 * underflowed already though.
+	 */
+
+	count = REG_RD(timer, regi_timer, r_tmr0_data);
+ 	jiffies_t = jiffies;
+
+	/*
+	 * avoiding timer inconsistencies (they are rare, but they happen)...
+	 * there are one problem that must be avoided here:
+	 *  1. the timer counter underflows
+	 */
+	if( jiffies_t == jiffies_p ) {
+		if( count > count_p ) {
+			/* Timer wrapped, use new count and prescale
+			 * increase the time corresponding to one jiffie
+			 */
+			usec_count = 1000000/HZ;
+		}
+	} else
+		jiffies_p = jiffies_t;
+        count_p = count;
+	/* Convert timer value to usec */
+	/* 100 MHz timer, divide by 100 to get usec */
+	usec_count +=  (TIMER0_DIV - count) / 100;
+	return usec_count;
+}
+
+/* From timer MDS describing the hardware watchdog:
+ * 4.3.1 Watchdog Operation
+ * The watchdog timer is an 8-bit timer with a configurable start value.
+ * Once started the whatchdog counts downwards with a frequency of 763 Hz
+ * (100/131072 MHz). When the watchdog counts down to 1, it generates an
+ * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
+ * chip.
+ */
+/* This gives us 1.3 ms to do something useful when the NMI comes */
+
+/* right now, starting the watchdog is the same as resetting it */
+#define start_watchdog reset_watchdog
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+static short int watchdog_key = 42;  /* arbitrary 7 bit number */
+#endif
+
+/* number of pages to consider "out of memory". it is normal that the memory
+ * is used though, so put this really low.
+ */
+
+#define WATCHDOG_MIN_FREE_PAGES 8
+
+void
+reset_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
+
+	/* only keep watchdog happy as long as we have memory left! */
+	if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
+		/* reset the watchdog with the inverse of the old key */
+		watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */
+		wd_ctrl.cnt = ETRAX_WD_CNT;
+		wd_ctrl.cmd = regk_timer_start;
+		wd_ctrl.key = watchdog_key;
+		REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+	}
+#endif
+}
+
+/* stop the watchdog - we still need the correct key */
+
+void
+stop_watchdog(void)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
+	watchdog_key ^= ETRAX_WD_KEY_MASK; /* invert key, which is 7 bits */
+	wd_ctrl.cnt = ETRAX_WD_CNT;
+	wd_ctrl.cmd = regk_timer_stop;
+	wd_ctrl.key = watchdog_key;
+	REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
+#endif
+}
+
+extern void show_registers(struct pt_regs *regs);
+
+void
+handle_watchdog_bite(struct pt_regs* regs)
+{
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	extern int cause_of_death;
+
+	raw_printk("Watchdog bite\n");
+
+	/* Check if forced restart or unexpected watchdog */
+	if (cause_of_death == 0xbedead) {
+		while(1);
+	}
+
+	/* Unexpected watchdog, stop the watchdog and dump registers*/
+	stop_watchdog();
+	raw_printk("Oops: bitten by watchdog\n");
+        show_registers(regs);
+#ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	reset_watchdog();
+#endif
+	while(1) /* nothing */;
+#endif
+}
+
+/* last time the cmos clock got updated */
+static long last_rtc_update = 0;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+
+//static unsigned short myjiff; /* used by our debug routine print_timestamp */
+
+extern void cris_do_profile(struct pt_regs *regs);
+
+static inline irqreturn_t
+timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	reg_timer_r_masked_intr masked_intr;
+	reg_timer_rw_ack_intr ack_intr = { 0 };
+
+	/* Check if the timer interrupt is for us (a tmr0 int) */
+	masked_intr = REG_RD(timer, timer_regs[cpu], r_masked_intr);
+	if (!masked_intr.tmr0)
+		return IRQ_NONE;
+
+	/* acknowledge the timer irq */
+	ack_intr.tmr0 = 1;
+	REG_WR(timer, timer_regs[cpu], rw_ack_intr, ack_intr);
+
+	/* reset watchdog otherwise it resets us! */
+	reset_watchdog();
+
+        /* Update statistics. */
+	update_process_times(user_mode(regs));
+
+	cris_do_profile(regs); /* Save profiling information */
+
+	/* The master CPU is responsible for the time keeping. */
+	if (cpu != 0)
+		return IRQ_HANDLED;
+
+	/* call the real timer interrupt handler */
+	do_timer(regs);
+
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 *
+	 * The division here is not time critical since it will run once in
+	 * 11 minutes
+	 */
+	if ((time_status & STA_UNSYNC) == 0 &&
+	    xtime.tv_sec > last_rtc_update + 660 &&
+	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
+	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
+		if (set_rtc_mmss(xtime.tv_sec) == 0)
+			last_rtc_update = xtime.tv_sec;
+		else
+			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+	}
+        return IRQ_HANDLED;
+}
+
+/* timer is SA_SHIRQ so drivers can add stuff to the timer irq chain
+ * it needs to be SA_INTERRUPT to make the jiffies update work properly
+ */
+
+static struct irqaction irq_timer  = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
+				  CPU_MASK_NONE, "timer", NULL, NULL};
+
+void __init
+cris_timer_init(void)
+{
+	int cpu = smp_processor_id();
+  	reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
+       	reg_timer_rw_tmr0_div tmr0_div = TIMER0_DIV;
+	reg_timer_rw_intr_mask timer_intr_mask;
+
+	/* Setup the etrax timers
+	 * Base frequency is 100MHz, divider 1000000 -> 100 HZ
+	 * We use timer0, so timer1 is free.
+	 * The trig timer is used by the fasttimer API if enabled.
+	 */
+
+       	tmr0_ctrl.op = regk_timer_ld;
+	tmr0_ctrl.freq = regk_timer_f100;
+       	REG_WR(timer, timer_regs[cpu], rw_tmr0_div, tmr0_div);
+       	REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Load */
+       	tmr0_ctrl.op = regk_timer_run;
+       	REG_WR(timer, timer_regs[cpu], rw_tmr0_ctrl, tmr0_ctrl); /* Start */
+
+       	/* enable the timer irq */
+       	timer_intr_mask = REG_RD(timer, timer_regs[cpu], rw_intr_mask);
+       	timer_intr_mask.tmr0 = 1;
+       	REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
+}
+
+void __init
+time_init(void)
+{
+	reg_intr_vect_rw_mask intr_mask;
+
+	/* probe for the RTC and read it if it exists
+	 * Before the RTC can be probed the loops_per_usec variable needs
+	 * to be initialized to make usleep work. A better value for
+	 * loops_per_usec is calculated by the kernel later once the
+	 * clock has started.
+	 */
+	loops_per_usec = 50;
+
+	if(RTC_INIT() < 0) {
+		/* no RTC, start at 1980 */
+		xtime.tv_sec = 0;
+		xtime.tv_nsec = 0;
+		have_rtc = 0;
+	} else {
+		/* get the current time */
+		have_rtc = 1;
+		update_xtime_from_cmos();
+	}
+
+	/*
+	 * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
+	 * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
+	 */
+	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
+
+	/* Start CPU local timer */
+	cris_timer_init();
+
+	/* enable the timer irq in global config */
+	intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+	intr_mask.timer = 1;
+	REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+	/* now actually register the timer irq handler that calls timer_interrupt() */
+
+	setup_irq(TIMER_INTR_VECT, &irq_timer);
+
+	/* enable watchdog if we should use one */
+
+#if defined(CONFIG_ETRAX_WATCHDOG)
+	printk("Enabling watchdog...\n");
+	start_watchdog();
+
+	/* If we use the hardware watchdog, we want to trap it as an NMI
+	   and dump registers before it resets us.  For this to happen, we
+	   must set the "m" NMI enable flag (which once set, is unset only
+	   when an NMI is taken).
+
+	   The same goes for the external NMI, but that doesn't have any
+	   driver or infrastructure support yet.  */
+        {
+          unsigned long flags;
+          local_save_flags(flags);
+          flags |= (1<<30); /* NMI M flag is at bit 30 */
+          local_irq_restore(flags);
+        }
+#endif
+}

arch/cris/arch-v32/kernel/traps.c

@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+
+#include <asm/arch/hwregs/supp_reg.h>
+
+extern void reset_watchdog(void);
+extern void stop_watchdog(void);
+
+extern int raw_printk(const char *fmt, ...);
+
+void
+show_registers(struct pt_regs *regs)
+{
+	/*
+	 * It's possible to use either the USP register or current->thread.usp.
+	 * USP might not correspond to the current proccess for all cases this
+	 * function is called, and current->thread.usp isn't up to date for the
+	 * current proccess. Experience shows that using USP is the way to go.
+	 */
+	unsigned long usp;
+	unsigned long d_mmu_cause;
+	unsigned long i_mmu_cause;
+
+	usp = rdusp();
+
+	raw_printk("CPU: %d\n", smp_processor_id());
+
+	raw_printk("ERP: %08lx SRP: %08lx  CCS: %08lx USP: %08lx MOF: %08lx\n",
+		regs->erp, regs->srp, regs->ccs, usp, regs->mof);
+
+	raw_printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+		regs->r0, regs->r1, regs->r2, regs->r3);
+
+	raw_printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+		regs->r4, regs->r5, regs->r6, regs->r7);
+
+	raw_printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+		regs->r8, regs->r9, regs->r10, regs->r11);
+
+	raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
+		regs->r12, regs->r13, regs->orig_r10, regs->acr);
+
+	raw_printk("sp: %08lx\n", regs);
+
+	SUPP_BANK_SEL(BANK_IM);
+	SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause);
+
+	SUPP_BANK_SEL(BANK_DM);
+	SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause);
+
+	raw_printk("       Data MMU Cause: %08lx\n", d_mmu_cause);
+	raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
+
+	raw_printk("Process %s (pid: %d, stackpage: %08lx)\n",
+		current->comm, current->pid, (unsigned long) current);
+
+	/* Show additional info if in kernel-mode. */
+	if (!user_mode(regs)) {
+		int i;
+		unsigned char c;
+
+		show_stack(NULL, (unsigned long *) usp);
+
+		/*
+		 * If the previous stack-dump wasn't a kernel one, dump the
+		 * kernel stack now.
+		 */
+		if (usp != 0)
+			show_stack(NULL, NULL);
+
+		raw_printk("\nCode: ");
+
+		if (regs->erp < PAGE_OFFSET)
+			goto bad_value;
+
+		/*
+		 * Quite often the value at regs->erp doesn't point to the
+		 * interesting instruction, which often is the previous
+		 * instruction. So dump at an offset large enough that the
+		 * instruction decoding should be in sync at the interesting
+		 * point, but small enough to fit on a row. The regs->erp
+		 * location is pointed out in a ksymoops-friendly way by
+		 * wrapping the byte for that address in parenthesis.
+		 */
+		for (i = -12; i < 12; i++) {
+			if (__get_user(c, &((unsigned char *) regs->erp)[i])) {
+bad_value:
+				raw_printk(" Bad IP value.");
+				break;
+			}
+
+			if (i == 0)
+				raw_printk("(%02x) ", c);
+			else
+				raw_printk("%02x ", c);
+		}
+
+		raw_printk("\n");
+	}
+}
+
+/*
+ * This gets called from entry.S when the watchdog has bitten. Show something
+ * similiar to an Oops dump, and if the kernel if configured to be a nice doggy;
+ * halt instead of reboot.
+ */
+void
+watchdog_bite_hook(struct pt_regs *regs)
+{
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	local_irq_disable();
+	stop_watchdog();
+	show_registers(regs);
+
+	while (1)
+		; /* Do nothing. */
+#else
+	show_registers(regs);
+#endif
+}
+
+/* This is normally the Oops function. */
+void
+die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+	if (user_mode(regs))
+		return;
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	/*
+	 * This printout might take too long and could trigger
+	 * the watchdog normally. If NICE_DOGGY is set, simply
+	 * stop the watchdog during the printout.
+	 */
+	stop_watchdog();
+#endif
+
+	raw_printk("%s: %04lx\n", str, err & 0xffff);
+
+	show_registers(regs);
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	reset_watchdog();
+#endif
+
+	do_exit(SIGSEGV);
+}
+
+void arch_enable_nmi(void)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	flags |= (1<<30); /* NMI M flag is at bit 30 */
+	local_irq_restore(flags);
+}

arch/cris/arch-v32/kernel/vcs_hook.c

@@ -0,0 +1,96 @@
+// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $
+//
+// Call simulator hook. This is the part running in the
+// simulated program.
+//
+
+#include "vcs_hook.h"
+#include <stdarg.h>
+#include <asm/arch-v32/hwregs/reg_map.h>
+#include <asm/arch-v32/hwregs/intr_vect_defs.h>
+
+#define HOOK_TRIG_ADDR     0xb7000000   /* hook cvlog model reg address */
+#define HOOK_MEM_BASE_ADDR 0xa0000000   /* csp4 (shared mem) base addr */
+
+#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset]
+#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset]
+#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0)
+#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset]
+
+
+// ------------------------------------------------------------------ hook_call
+int hook_call( unsigned id, unsigned pcnt, ...) {
+  va_list ap;
+  unsigned i;
+  unsigned ret;
+#ifdef USING_SOS
+  PREEMPT_OFF_SAVE();
+#endif
+
+  // pass parameters
+  HOOK_DATA(0) = id;
+
+  /* Have to make hook_print_str a special case since we call with a
+     parameter of byte type. Should perhaps be a separate
+     hook_call. */
+
+  if (id == hook_print_str) {
+    int i;
+    char *str;
+
+    HOOK_DATA(1) = pcnt;
+
+    va_start(ap, pcnt);
+    str = (char*)va_arg(ap,unsigned);
+
+    for (i=0; i!=pcnt; i++) {
+      HOOK_DATA_BYTE(8+i) = str[i];
+    }
+    HOOK_DATA_BYTE(8+i) = 0;	/* null byte */
+  }
+  else {
+    va_start(ap, pcnt);
+    for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned);
+    va_end(ap);
+  }
+
+  // read from mem to make sure data has propagated to memory before trigging
+  *((volatile unsigned*) HOOK_MEM_BASE_ADDR);
+
+  // trigger hook
+  HOOK_TRIG(id);
+
+  // wait for call to finish
+  while( VHOOK_DATA(0) > 0 ) {}
+
+  // extract return value
+
+  ret = VHOOK_DATA(1);
+
+#ifdef USING_SOS
+  PREEMPT_RESTORE();
+#endif
+  return ret;
+}
+
+unsigned
+hook_buf(unsigned i)
+{
+  return (HOOK_DATA(i));
+}
+
+void print_str( const char *str ) {
+  int i;
+  for (i=1; str[i]; i++);         /* find null at end of string */
+  hook_call(hook_print_str, i, str);
+}
+
+// --------------------------------------------------------------- CPU_KICK_DOG
+void CPU_KICK_DOG(void) {
+  (void) hook_call( hook_kick_dog, 0 );
+}
+
+// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT
+void CPU_WATCHDOG_TIMEOUT( unsigned t ) {
+  (void) hook_call( hook_dog_timeout, 1, t );
+}

arch/cris/arch-v32/kernel/vcs_hook.h

@@ -0,0 +1,42 @@
+// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $
+//
+// Call simulator hook functions
+
+#ifndef HOOK_H
+#define HOOK_H
+
+int hook_call( unsigned id, unsigned pcnt, ...);
+
+enum hook_ids {
+  hook_debug_on = 1,
+  hook_debug_off,
+  hook_stop_sim_ok,
+  hook_stop_sim_fail,
+  hook_alloc_shared,
+  hook_ptr_shared,
+  hook_free_shared,
+  hook_file2shared,
+  hook_cmp_shared,
+  hook_print_params,
+  hook_sim_time,
+  hook_stop_sim,
+  hook_kick_dog,
+  hook_dog_timeout,
+  hook_rand,
+  hook_srand,
+  hook_rand_range,
+  hook_print_str,
+  hook_print_hex,
+  hook_cmp_offset_shared,
+  hook_fill_random_shared,
+  hook_alloc_random_data,
+  hook_calloc_random_data,
+  hook_print_int,
+  hook_print_uint,
+  hook_fputc,
+  hook_init_fd,
+  hook_sbrk
+
+};
+
+#endif

arch/cris/arch-v32/lib/Makefile

@@ -0,0 +1,6 @@
+#
+# Makefile for Etrax-specific library files..
+#
+
+lib-y  = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o
+

arch/cris/arch-v32/lib/checksum.S

@@ -0,0 +1,111 @@
+/*
+ * A fast checksum routine using movem
+ * Copyright (c) 1998-2001, 2003 Axis Communications AB
+ *
+ * csum_partial(const unsigned char * buff, int len, unsigned int sum)
+ */
+
+	.globl	csum_partial
+csum_partial:
+
+	;; r10 - src
+	;; r11 - length
+	;; r12 - checksum
+
+	;; check for breakeven length between movem and normal word looping versions
+	;; we also do _NOT_ want to compute a checksum over more than the
+	;; actual length when length < 40
+
+	cmpu.w	80,$r11
+	blo	_word_loop
+	nop
+
+	;; need to save the registers we use below in the movem loop
+	;; this overhead is why we have a check above for breakeven length
+	;; only r0 - r8 have to be saved, the other ones are clobber-able
+	;; according to the ABI
+
+	subq	9*4,$sp
+	subq	10*4,$r11	; update length for the first loop
+	movem	$r8,[$sp]
+
+	;; do a movem checksum
+
+_mloop:	movem	[$r10+],$r9	; read 10 longwords
+
+	;; perform dword checksumming on the 10 longwords
+
+	add.d	$r0,$r12
+	addc	$r1,$r12
+	addc	$r2,$r12
+	addc	$r3,$r12
+	addc	$r4,$r12
+	addc	$r5,$r12
+	addc	$r6,$r12
+	addc	$r7,$r12
+	addc	$r8,$r12
+	addc	$r9,$r12
+
+	;; fold the carry into the checksum, to avoid having to loop the carry
+	;; back into the top
+
+	addc	0,$r12
+	addc	0,$r12		; do it again, since we might have generated a carry
+
+	subq	10*4,$r11
+	bge	_mloop
+	nop
+
+	addq	10*4,$r11	; compensate for last loop underflowing length
+
+	movem	[$sp+],$r8	; restore regs
+
+_word_loop:
+	;; only fold if there is anything to fold.
+
+	cmpq	0,$r12
+	beq	_no_fold
+
+	;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below.
+	;; r9 and r13 can be used as temporaries.
+
+	moveq	-1,$r9		; put 0xffff in r9, faster than move.d 0xffff,r9
+	lsrq	16,$r9
+
+	move.d	$r12,$r13
+	lsrq	16,$r13		; r13 = checksum >> 16
+	and.d	$r9,$r12		; checksum = checksum & 0xffff
+	add.d	$r13,$r12		; checksum += r13
+	move.d	$r12,$r13		; do the same again, maybe we got a carry last add
+	lsrq	16,$r13
+	and.d	$r9,$r12
+	add.d	$r13,$r12
+
+_no_fold:
+	cmpq	2,$r11
+	blt	_no_words
+	nop
+
+	;; checksum the rest of the words
+
+	subq	2,$r11
+
+_wloop:	subq	2,$r11
+	bge	_wloop
+	addu.w	[$r10+],$r12
+
+	addq	2,$r11
+
+_no_words:
+	;; see if we have one odd byte more
+	cmpq	1,$r11
+	beq	_do_byte
+	nop
+	ret
+	move.d	$r12,$r10
+
+_do_byte:
+	;; copy and checksum the last byte
+	addu.b	[$r10],$r12
+	ret
+	move.d	$r12,$r10

arch/cris/arch-v32/lib/checksumcopy.S

@@ -0,0 +1,120 @@
+/*
+ * A fast checksum+copy routine using movem
+ * Copyright (c) 1998, 2001, 2003 Axis Communications AB
+ *
+ * Authors:	Bjorn Wesen
+ *
+ * csum_partial_copy_nocheck(const char *src, char *dst,
+ *		             int len, unsigned int sum)
+ */
+
+	.globl	csum_partial_copy_nocheck
+csum_partial_copy_nocheck:
+
+	;; r10 - src
+	;; r11 - dst
+	;; r12 - length
+	;; r13 - checksum
+
+	;; check for breakeven length between movem and normal word looping versions
+	;; we also do _NOT_ want to compute a checksum over more than the
+	;; actual length when length < 40
+
+	cmpu.w	80,$r12
+	blo	_word_loop
+	nop
+
+	;; need to save the registers we use below in the movem loop
+	;; this overhead is why we have a check above for breakeven length
+	;; only r0 - r8 have to be saved, the other ones are clobber-able
+	;; according to the ABI
+
+	subq	9*4,$sp
+	subq	10*4,$r12	; update length for the first loop
+	movem	$r8,[$sp]
+
+	;; do a movem copy and checksum
+
+1:	;; A failing userspace access (the read) will have this as PC.
+_mloop:	movem	[$r10+],$r9	; read 10 longwords
+	movem	$r9,[$r11+]	; write 10 longwords
+
+	;; perform dword checksumming on the 10 longwords
+
+	add.d	$r0,$r13
+	addc	$r1,$r13
+	addc	$r2,$r13
+	addc	$r3,$r13
+	addc	$r4,$r13
+	addc	$r5,$r13
+	addc	$r6,$r13
+	addc	$r7,$r13
+	addc	$r8,$r13
+	addc	$r9,$r13
+
+	;; fold the carry into the checksum, to avoid having to loop the carry
+	;; back into the top
+
+	addc	0,$r13
+	addc	0,$r13		; do it again, since we might have generated a carry
+
+	subq	10*4,$r12
+	bge	_mloop
+	nop
+
+	addq	10*4,$r12	; compensate for last loop underflowing length
+
+	movem	[$sp+],$r8	; restore regs
+
+_word_loop:
+	;; only fold if there is anything to fold.
+
+	cmpq	0,$r13
+	beq	_no_fold
+
+	;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below
+	;; r9 can be used as temporary.
+
+	move.d	$r13,$r9
+	lsrq	16,$r9		; r0 = checksum >> 16
+	and.d	0xffff,$r13	; checksum = checksum & 0xffff
+	add.d	$r9,$r13	; checksum += r0
+	move.d	$r13,$r9	; do the same again, maybe we got a carry last add
+	lsrq	16,$r9
+	and.d	0xffff,$r13
+	add.d	$r9,$r13
+
+_no_fold:
+	cmpq	2,$r12
+	blt	_no_words
+	nop
+
+	;; copy and checksum the rest of the words
+
+	subq	2,$r12
+
+2:	;; A failing userspace access for the read below will have this as PC.
+_wloop:	move.w	[$r10+],$r9
+	addu.w	$r9,$r13
+	subq	2,$r12
+	bge	_wloop
+	move.w	$r9,[$r11+]
+
+	addq	2,$r12
+
+_no_words:
+	;; see if we have one odd byte more
+	cmpq	1,$r12
+	beq	_do_byte
+	nop
+	ret
+	move.d	$r13,$r10
+
+_do_byte:
+	;; copy and checksum the last byte
+3:	;; A failing userspace access for the read below will have this as PC.
+	move.b	[$r10],$r9
+	addu.b	$r9,$r13
+	move.b	$r9,[$r11]
+	ret
+	move.d	$r13,$r10

arch/cris/arch-v32/lib/csumcpfruser.S

@@ -0,0 +1,69 @@
+/*
+ * Add-on to transform csum_partial_copy_nocheck in checksumcopy.S into
+ * csum_partial_copy_from_user by adding exception records.
+ *
+ * Copyright (C) 2001, 2003 Axis Communications AB.
+ *
+ * Author: Hans-Peter Nilsson.
+ */
+
+#include <asm/errno.h>
+
+/* Same function body, but a different name.  If we just added exception
+   records to _csum_partial_copy_nocheck and made it generic, we wouldn't
+   know a user fault from a kernel fault and we would have overhead in
+   each kernel caller for the error-pointer argument.
+
+   unsigned int csum_partial_copy_from_user
+     (const char *src, char *dst, int len, unsigned int sum, int *errptr);
+
+   Note that the errptr argument is only set if we encounter an error.
+   It is conveniently located on the stack, so the normal function body
+   does not have to handle it.  */
+
+#define csum_partial_copy_nocheck csum_partial_copy_from_user
+
+/* There are local labels numbered 1, 2 and 3 present to mark the
+   different from-user accesses.  */
+#include "checksumcopy.S"
+
+	.section .fixup,"ax"
+
+;; Here from the movem loop; restore stack.
+4:
+	movem	[$sp+],$r8
+;; r12 is already decremented.  Add back chunk_size-2.
+	addq	40-2,$r12
+
+;; Here from the word loop; r12 is off by 2; add it back.
+5:
+	addq	2,$r12
+
+;; Here from a failing single byte.
+6:
+
+;; Signal in *errptr that we had a failing access.
+	move.d	[$sp],$acr
+	moveq	-EFAULT,$r9
+	subq	4,$sp
+	move.d	$r9,[$acr]
+
+;; Clear the rest of the destination area using memset.  Preserve the
+;; checksum for the readable bytes.
+	move.d	$r13,[$sp]
+	subq	4,$sp
+	move.d	$r11,$r10
+	move	$srp,[$sp]
+	jsr	memset
+	clear.d	$r11
+
+	move	[$sp+],$srp
+	ret
+	move.d	[$sp+],$r10
+
+	.previous
+	.section __ex_table,"a"
+	.dword 1b,4b
+	.dword 2b,5b
+	.dword 3b,6b
+	.previous

arch/cris/arch-v32/lib/dram_init.S

@@ -0,0 +1,120 @@
+/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $
+ *
+ * DRAM/SDRAM initialization - alter with care
+ * This file is intended to be included from other assembler files
+ *
+ * Note: This file may not modify r8 or r9 because they are used to
+ * carry information from the decompresser to the kernel
+ *
+ * Copyright (C) 2000-2003 Axis Communications AB
+ *
+ * Authors:  Mikael Starvik (starvik@axis.com)
+ */
+
+/* Just to be certain the config file is included, we include it here
+ * explicitely instead of depending on it being included in the file that
+ * uses this code.
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+
+	;; WARNING! The registers r8 and r9 are used as parameters carrying
+	;; information from the decompressor (if the kernel was compressed).
+	;; They should not be used in the code below.
+
+	; Refer to BIF MDS for a description of SDRAM initialization
+
+	; Bank configuration
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0), $r0
+	move.d   CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1
+	move.d   $r1, [$r0]
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1), $r0
+	move.d   CONFIG_ETRAX_SDRAM_GRP1_CONFIG, $r1
+	move.d   $r1, [$r0]
+
+	; Calculate value of mrs_data
+	; CAS latency = 2 && bus_width = 32 => 0x40
+	; CAS latency = 3 && bus_width = 32 => 0x60
+	; CAS latency = 2 && bus_width = 16 => 0x20
+	; CAS latency = 3 && bus_width = 16 => 0x30
+
+	; Check if value is already supplied in kernel config
+	move.d   CONFIG_ETRAX_SDRAM_COMMAND, $r2
+	bne	 _set_timing
+	nop
+
+	move.d   0x40, $r4       ; Assume 32 bits and CAS latency = 2
+	move.d   CONFIG_ETRAX_SDRAM_TIMING, $r1
+ 	and.d    0x07, $r1       ; Get CAS latency
+	cmpq	 2, $r1		 ; CL = 2 ?
+	beq	 _bw_check
+	nop
+	move.d   0x60, $r4
+
+_bw_check:
+	; Assume that group 0 width is equal to group 1. This assumption
+	; is wrong for a group 1 only hardware (such as the grand old
+	; StorPoint+).
+	move.d   CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1
+	and.d    0x200, $r1	; DRAM width is bit 9
+	beq      _set_timing
+	lslq	 2, $r4		;  mrs_data starts at bit 2
+	lsrq     1, $r4		;  16 bits. Shift down value.
+
+	; Set timing parameters (refresh off to avoid Guinness TR 83)
+_set_timing:
+	move.d   CONFIG_ETRAX_SDRAM_TIMING, $r1
+	and.d    ~(3 << reg_bif_core_rw_sdram_timing___ref___lsb), $r1
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0
+	move.d   $r1, [$r0]
+
+	; Issue NOP command
+	move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd), $r5
+	moveq regk_bif_core_nop, $r1
+	move.d $r1, [$r5]
+
+	; Wait 200us
+	move.d   10000, $r2
+1:	bne      1b
+	subq     1, $r2
+
+	; Issue initialization command sequence
+	move.d   _sdram_commands_start, $r2
+	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
+	move.d   _sdram_commands_end,  $r3
+	and.d    0x000fffff, $r3
+1:	clear.d  $r6
+	move.b   [$r2+], $r6 	; Load command
+	or.d     $r4, $r6	; Add calculated mrs
+	move.d   $r6, [$r5]	; Write rw_sdram_cmd
+	; Wait 80 ns between each command
+	move.d	 4000, $r7
+2:	bne	 2b
+	subq	 1, $r7
+	cmp.d    $r2, $r3	; Last command?
+	bne      1b
+	nop
+
+	; Start refresh
+	move.d   CONFIG_ETRAX_SDRAM_TIMING, $r1
+	move.d   REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0
+	move.d   $r1, [$r0]
+
+	; Initialization finished
+	ba       _sdram_commands_end
+	nop
+
+_sdram_commands_start:
+	.byte   regk_bif_core_pre ; Precharge
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_ref ; refresh
+	.byte   regk_bif_core_mrs ; mrs
+_sdram_commands_end:

arch/cris/arch-v32/lib/hw_settings.S

@@ -0,0 +1,73 @@
+/*
+ * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $
+ *
+ * This table is used by some tools to extract hardware parameters.
+ * The table should be included in the kernel and the decompressor.
+ * Don't forget to update the tools if you change this table.
+ *
+ * Copyright (C) 2001 Axis Communications AB
+ *
+ * Authors:  Mikael Starvik (starvik@axis.com)
+ */
+
+#include <linux/config.h>
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
+
+	.ascii "HW_PARAM_MAGIC" ; Magic number
+	.dword 0xc0004000	; Kernel start address
+
+	; Debug port
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	.dword 0
+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
+	.dword 1
+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
+	.dword 2
+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
+	.dword 3
+#else
+	.dword 4 ; No debug
+#endif
+
+	; Register values
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg)
+	.dword CONFIG_ETRAX_MEM_GRP1_CONFIG
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg)
+	.dword CONFIG_ETRAX_MEM_GRP2_CONFIG
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg)
+	.dword CONFIG_ETRAX_MEM_GRP3_CONFIG
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg)
+	.dword CONFIG_ETRAX_MEM_GRP4_CONFIG
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0)
+	.dword CONFIG_ETRAX_SDRAM_GRP0_CONFIG
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1)
+	.dword CONFIG_ETRAX_SDRAM_GRP1_CONFIG
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing)
+	.dword CONFIG_ETRAX_SDRAM_TIMING
+	.dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd)
+	.dword CONFIG_ETRAX_SDRAM_COMMAND
+
+	.dword REG_ADDR(gio, regi_gio, rw_pa_dout)
+	.dword CONFIG_ETRAX_DEF_GIO_PA_OUT
+	.dword REG_ADDR(gio, regi_gio, rw_pa_oe)
+	.dword CONFIG_ETRAX_DEF_GIO_PA_OE
+	.dword REG_ADDR(gio, regi_gio, rw_pb_dout)
+	.dword CONFIG_ETRAX_DEF_GIO_PB_OUT
+	.dword REG_ADDR(gio, regi_gio, rw_pb_oe)
+	.dword CONFIG_ETRAX_DEF_GIO_PB_OE
+	.dword REG_ADDR(gio, regi_gio, rw_pc_dout)
+	.dword CONFIG_ETRAX_DEF_GIO_PC_OUT
+	.dword REG_ADDR(gio, regi_gio, rw_pc_oe)
+	.dword CONFIG_ETRAX_DEF_GIO_PC_OE
+	.dword REG_ADDR(gio, regi_gio, rw_pd_dout)
+	.dword CONFIG_ETRAX_DEF_GIO_PD_OUT
+	.dword REG_ADDR(gio, regi_gio, rw_pd_oe)
+	.dword CONFIG_ETRAX_DEF_GIO_PD_OE
+	.dword REG_ADDR(gio, regi_gio, rw_pe_dout)
+	.dword CONFIG_ETRAX_DEF_GIO_PE_OUT
+	.dword REG_ADDR(gio, regi_gio, rw_pe_oe)
+	.dword CONFIG_ETRAX_DEF_GIO_PE_OE
+
+	.dword 0 ; No more register values

arch/cris/arch-v32/lib/memset.c

@@ -0,0 +1,253 @@
+/*#************************************************************************#*/
+/*#-------------------------------------------------------------------------*/
+/*#                                                                         */
+/*# FUNCTION NAME: memset()                                                 */
+/*#                                                                         */
+/*# PARAMETERS:  void* dst;   Destination address.                          */
+/*#              int     c;   Value of byte to write.                       */
+/*#              int   len;   Number of bytes to write.                     */
+/*#                                                                         */
+/*# RETURNS:     dst.                                                       */
+/*#                                                                         */
+/*# DESCRIPTION: Sets the memory dst of length len bytes to c, as standard. */
+/*#              Framework taken from memcpy.  This routine is              */
+/*#              very sensitive to compiler changes in register allocation. */
+/*#              Should really be rewritten to avoid this problem.          */
+/*#                                                                         */
+/*#-------------------------------------------------------------------------*/
+/*#                                                                         */
+/*# HISTORY                                                                 */
+/*#                                                                         */
+/*# DATE      NAME            CHANGES                                       */
+/*# ----      ----            -------                                       */
+/*# 990713    HP              Tired of watching this function (or           */
+/*#                           really, the nonoptimized generic              */
+/*#                           implementation) take up 90% of simulator      */
+/*#                           output.  Measurements needed.                 */
+/*#                                                                         */
+/*#-------------------------------------------------------------------------*/
+
+#include <linux/types.h>
+
+/* No, there's no macro saying 12*4, since it is "hard" to get it into
+   the asm in a good way.  Thus better to expose the problem everywhere.
+   */
+
+/* Assuming 1 cycle per dword written or read (ok, not really true), and
+   one per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1)
+   so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */
+
+#define ZERO_BLOCK_SIZE (1*12*4)
+
+void *memset(void *pdst,
+             int c,
+             size_t plen)
+{
+  /* Ok.  Now we want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this. */
+
+  register char *return_dst __asm__ ("r10") = pdst;
+  register int n __asm__ ("r12") = plen;
+  register int lc __asm__ ("r11") = c;
+
+  /* Most apps use memset sanely.  Only those memsetting about 3..4
+     bytes or less get penalized compared to the generic implementation
+     - and that's not really sane use. */
+
+  /* Ugh.  This is fragile at best.  Check with newer GCC releases, if
+     they compile cascaded "x |= x << 8" sanely! */
+  __asm__("movu.b %0,$r13	\n\
+           lslq 8,$r13		\n\
+	   move.b %0,$r13	\n\
+	   move.d $r13,%0	\n\
+	   lslq 16,$r13		\n\
+	   or.d $r13,%0"
+          : "=r" (lc) : "0" (lc) : "r13");
+
+  {
+    register char *dst __asm__ ("r13") = pdst;
+
+  /* This is NONPORTABLE, but since this whole routine is     */
+  /* grossly nonportable that doesn't matter.                 */
+
+  if (((unsigned long) pdst & 3) != 0
+     /* Oops! n=0 must be a legal call, regardless of alignment. */
+      && n >= 3)
+  {
+    if ((unsigned long)dst & 1)
+    {
+      *dst = (char) lc;
+      n--;
+      dst++;
+    }
+
+    if ((unsigned long)dst & 2)
+    {
+      *(short *)dst = lc;
+      n -= 2;
+      dst += 2;
+    }
+  }
+
+  /* Now the fun part.  For the threshold value of this, check the equation
+     above. */
+  /* Decide which copying method to use. */
+  if (n >= ZERO_BLOCK_SIZE)
+  {
+    /* For large copies we use 'movem' */
+
+  /* It is not optimal to tell the compiler about clobbering any
+     registers; that will move the saving/restoring of those registers
+     to the function prologue/epilogue, and make non-movem sizes
+     suboptimal.
+
+      This method is not foolproof; it assumes that the "asm reg"
+     declarations at the beginning of the function really are used
+     here (beware: they may be moved to temporary registers).
+      This way, we do not have to save/move the registers around into
+     temporaries; we can safely use them straight away.
+
+      If you want to check that the allocation was right; then
+      check the equalities in the first comment.  It should say
+      "r13=r13, r12=r12, r11=r11" */
+    __asm__ volatile ("							\n\
+        ;; Check that the register asm declaration got right.		\n\
+        ;; The GCC manual says it will work, but there *has* been bugs.	\n\
+	.ifnc %0-%1-%4,$r13-$r12-$r11					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq 	11*4,$sp						\n\
+        movem   $r10,[$sp]						\n\
+									\n\
+        move.d  $r11,$r0						\n\
+        move.d  $r11,$r1						\n\
+        move.d  $r11,$r2						\n\
+        move.d  $r11,$r3						\n\
+        move.d  $r11,$r4						\n\
+        move.d  $r11,$r5						\n\
+        move.d  $r11,$r6						\n\
+        move.d  $r11,$r7						\n\
+        move.d  $r11,$r8						\n\
+        move.d  $r11,$r9						\n\
+        move.d  $r11,$r10						\n\
+									\n\
+        ;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+        ;; Update n for the first loop					\n\
+        subq    12*4,$r12						\n\
+0:									\n\
+        subq   12*4,$r12						\n\
+        bge     0b							\n\
+	movem	$r11,[$r13+]						\n\
+									\n\
+        addq   12*4,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+        movem [$sp+],$r10"
+
+     /* Outputs */ : "=r" (dst), "=r" (n)
+     /* Inputs */ : "0" (dst), "1" (n), "r" (lc));
+  }
+
+    /* Either we directly starts copying, using dword copying
+       in a loop, or we copy as much as possible with 'movem'
+       and then the last block (<44 bytes) is copied here.
+       This will work since 'movem' will have updated src,dst,n. */
+
+    while ( n >= 16 )
+    {
+      *((long*)dst)++ = lc;
+      *((long*)dst)++ = lc;
+      *((long*)dst)++ = lc;
+      *((long*)dst)++ = lc;
+      n -= 16;
+    }
+
+    /* A switch() is definitely the fastest although it takes a LOT of code.
+     * Particularly if you inline code this.
+     */
+    switch (n)
+    {
+      case 0:
+        break;
+      case 1:
+        *(char*)dst = (char) lc;
+        break;
+      case 2:
+        *(short*)dst = (short) lc;
+        break;
+      case 3:
+        *((short*)dst)++ = (short) lc;
+        *(char*)dst = (char) lc;
+        break;
+      case 4:
+        *((long*)dst)++ = lc;
+        break;
+      case 5:
+        *((long*)dst)++ = lc;
+        *(char*)dst = (char) lc;
+        break;
+      case 6:
+        *((long*)dst)++ = lc;
+        *(short*)dst = (short) lc;
+        break;
+      case 7:
+        *((long*)dst)++ = lc;
+        *((short*)dst)++ = (short) lc;
+        *(char*)dst = (char) lc;
+        break;
+      case 8:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        break;
+      case 9:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *(char*)dst = (char) lc;
+        break;
+      case 10:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *(short*)dst = (short) lc;
+        break;
+      case 11:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *((short*)dst)++ = (short) lc;
+        *(char*)dst = (char) lc;
+        break;
+      case 12:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        break;
+      case 13:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *(char*)dst = (char) lc;
+        break;
+      case 14:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *(short*)dst = (short) lc;
+        break;
+      case 15:
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *((long*)dst)++ = lc;
+        *((short*)dst)++ = (short) lc;
+        *(char*)dst = (char) lc;
+        break;
+    }
+  }
+
+  return return_dst; /* destination pointer. */
+} /* memset() */

arch/cris/arch-v32/lib/nand_init.S

@@ -0,0 +1,179 @@
+##=============================================================================
+##
+##      nand_init.S
+##
+##      The bootrom copies data from the NAND flash to the internal RAM but
+##      due to a bug/feature we can only trust the 256 first bytes. So this
+##      code copies more data from NAND flash to internal RAM. Obvioulsy this
+##      code must fit in the first 256 bytes so alter with care.
+##
+##	Some notes about the bug/feature for future reference:
+##        The bootrom copies the first 127 KB from NAND flash to internal
+##        memory. The problem is that it does a bytewise copy. NAND flashes
+##        does autoincrement on the address so for a 16-bite device each
+##        read/write increases the address by two. So the copy loop in the
+##        bootrom will discard every second byte. This is solved by inserting
+##        zeroes in every second byte in the first erase block.
+##
+##        The bootrom also incorrectly assumes that it can read the flash
+##        linear with only one read command but the flash will actually
+##        switch between normal area and spare area if you do that so we
+##        can't trust more than the first 256 bytes.
+##
+##=============================================================================
+
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
+#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
+#include <asm/arch/hwregs/asm/config_defs_asm.h>
+#include <linux/config.h>
+
+;; There are 8-bit NAND flashes and 16-bit NAND flashes.
+;; We need to treat them slightly different.
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+#define PAGE_SIZE 256
+#else
+#error 2
+#define PAGE_SIZE 512
+#endif
+#define ERASE_BLOCK 16384
+
+;; GPIO pins connected to NAND flash
+#define CE 4
+#define CLE 5
+#define ALE 6
+#define BY 7
+
+;; Address space for NAND flash
+#define NAND_RD_ADDR 0x90000000
+#define NAND_WR_ADDR 0x94000000
+
+#define READ_CMD 0x00
+
+;; Readability macros
+#define CSP_MASK \
+	REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \
+	REG_MASK(bif_core, rw_grp3_cfg, gated_csp1)
+#define CSP_VAL \
+	REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \
+	REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr)
+
+;;----------------------------------------------------------------------------
+;; Macros to set/clear GPIO bits
+
+.macro SET x
+	or.b   (1<<\x),$r9
+	move.d $r9, [$r2]
+.endm
+
+.macro CLR x
+	and.b  ~(1<<\x),$r9
+	move.d $r9, [$r2]
+.endm
+
+;;----------------------------------------------------------------------------
+
+nand_boot:
+	;; Check if nand boot was selected
+	move.d REG_ADDR(config, regi_config, r_bootsel), $r0
+	move.d [$r0], $r0
+	and.d  REG_MASK(config, r_bootsel, boot_mode), $r0
+	cmp.d  REG_STATE(config, r_bootsel, boot_mode, nand), $r0
+	bne normal_boot ; No NAND boot
+	nop
+
+copy_nand_to_ram:
+	;; copy_nand_to_ram
+	;; Arguments
+	;;   r10 - destination
+	;;   r11 - source offset
+	;;   r12 - size
+	;;   r13 - Address to jump to after completion
+	;; Note : r10-r12 are clobbered on return
+	;; Registers used:
+	;;   r0 - NAND_RD_ADDR
+	;;   r1 - NAND_WR_ADDR
+	;;   r2 - reg_gio_rw_pa_dout
+	;;   r3 - reg_gio_r_pa_din
+	;;   r4 - tmp
+	;;   r5 - byte counter within a page
+	;;   r6 - reg_pinmux_rw_pa
+	;;   r7 - reg_gio_rw_pa_oe
+	;;   r8 - reg_bif_core_rw_grp3_cfg
+	;;   r9 - reg_gio_rw_pa_dout shadow
+	move.d 0x90000000, $r0
+	move.d 0x94000000, $r1
+	move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2
+	move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3
+	move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6
+	move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7
+	move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8
+
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+	lsrq	1, $r11
+#endif
+	;; Set up GPIO
+	move.d [$r2], $r9
+	move.d [$r7], $r4
+	or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4
+	move.d $r4, [$r7]
+
+	;; Set up bif
+	move.d [$r8], $r4
+	and.d CSP_MASK, $r4
+	or.d CSP_VAL, $r4
+	move.d $r4, [$r8]
+
+1:	;; Copy one page
+	CLR CE
+	SET CLE
+	moveq	READ_CMD, $r4
+	move.b	$r4, [$r1]
+	moveq	20, $r4
+2:	bne	2b
+	subq	1, $r4
+	CLR CLE
+	SET ALE
+	clear.w [$r1] 		; Column address = 0
+	move.d	$r11, $r4
+	lsrq	8, $r4
+	move.b	$r4, [$r1]	; Row address
+	lsrq	8, $r4
+	move.b	$r4, [$r1]	; Row adddress
+	moveq	20, $r4
+2:	bne	2b
+	subq	1, $r4
+	CLR ALE
+2:	move.d	[$r3], $r4
+	and.d	1 << BY, $r4
+	beq 2b
+	movu.w  PAGE_SIZE, $r5
+2:	; Copy one byte/word
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+	move.w  [$r0], $r4
+#else
+	move.b  [$r0], $r4
+#endif
+	subq	1, $r5
+	bne	2b
+#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
+	move.w  $r4, [$r10+]
+	subu.w	PAGE_SIZE*2, $r12
+#else
+	move.b  $r4, [$r10+]
+	subu.w	PAGE_SIZE, $r12
+#endif
+	bpl	1b
+	addu.w	PAGE_SIZE, $r11
+
+	;; End of copy
+	jump	$r13
+	nop
+
+	;; This will warn if the code above is too large. If you consider
+	;; to remove this you don't understand the bug/feature.
+	.org 256
+	.org ERASE_BLOCK
+
+normal_boot:

arch/cris/arch-v32/lib/spinlock.S

@@ -0,0 +1,33 @@
+;; Core of the spinlock implementation
+;;
+;; Copyright (C) 2004 Axis Communications AB.
+;;
+;; Author: Mikael Starvik
+
+
+	.global cris_spin_lock
+	.global cris_spin_trylock
+
+	.text
+
+cris_spin_lock:
+	clearf	p
+1:	test.d	[$r10]
+	beq	1b
+	clearf	p
+	ax
+	clear.d [$r10]
+	bcs     1b
+	clearf	p
+	ret
+	nop
+
+cris_spin_trylock:
+	clearf	p
+1:	move.d	[$r10], $r11
+	ax
+	clear.d [$r10]
+        bcs	1b
+        clearf	p
+	ret
+	move.d	$r11,$r10

arch/cris/arch-v32/lib/string.c

@@ -0,0 +1,219 @@
+/*#************************************************************************#*/
+/*#-------------------------------------------------------------------------*/
+/*#                                                                         */
+/*# FUNCTION NAME: memcpy()                                                 */
+/*#                                                                         */
+/*# PARAMETERS:  void* dst;   Destination address.                          */
+/*#              void* src;   Source address.                               */
+/*#              int   len;   Number of bytes to copy.                      */
+/*#                                                                         */
+/*# RETURNS:     dst.                                                       */
+/*#                                                                         */
+/*# DESCRIPTION: Copies len bytes of memory from src to dst.  No guarantees */
+/*#              about copying of overlapping memory areas. This routine is */
+/*#              very sensitive to compiler changes in register allocation. */
+/*#              Should really be rewritten to avoid this problem.          */
+/*#                                                                         */
+/*#-------------------------------------------------------------------------*/
+/*#                                                                         */
+/*# HISTORY                                                                 */
+/*#                                                                         */
+/*# DATE      NAME            CHANGES                                       */
+/*# ----      ----            -------                                       */
+/*# 941007    Kenny R         Creation                                      */
+/*# 941011    Kenny R         Lots of optimizations and inlining.           */
+/*# 941129    Ulf A           Adapted for use in libc.                      */
+/*# 950216    HP              N==0 forgotten if non-aligned src/dst.        */
+/*#                           Added some optimizations.                     */
+/*# 001025    HP              Make src and dst char *.  Align dst to	    */
+/*#			      dword, not just word-if-both-src-and-dst-	    */
+/*#			      are-misaligned.				    */
+/*#                                                                         */
+/*#-------------------------------------------------------------------------*/
+
+#include <linux/types.h>
+
+void *memcpy(void *pdst,
+             const void *psrc,
+             size_t pn)
+{
+  /* Ok.  Now we want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on. */
+
+  register void *return_dst __asm__ ("r10") = pdst;
+  register char *dst __asm__ ("r13") = pdst;
+  register const char *src __asm__ ("r11") = psrc;
+  register int n __asm__ ("r12") = pn;
+
+
+  /* When src is aligned but not dst, this makes a few extra needless
+     cycles.  I believe it would take as many to check that the
+     re-alignment was unnecessary.  */
+  if (((unsigned long) dst & 3) != 0
+      /* Don't align if we wouldn't copy more than a few bytes; so we
+	 don't have to check further for overflows.  */
+      && n >= 3)
+  {
+    if ((unsigned long) dst & 1)
+    {
+      n--;
+      *(char*)dst = *(char*)src;
+      src++;
+      dst++;
+    }
+
+    if ((unsigned long) dst & 2)
+    {
+      n -= 2;
+      *(short*)dst = *(short*)src;
+      src += 2;
+      dst += 2;
+    }
+  }
+
+  /* Decide which copying method to use.  Movem is dirt cheap, so the
+     overheap is low enough to always use the minimum block size as the
+     threshold.  */
+  if (n >= 44)
+  {
+    /* For large copies we use 'movem' */
+
+  /* It is not optimal to tell the compiler about clobbering any
+     registers; that will move the saving/restoring of those registers
+     to the function prologue/epilogue, and make non-movem sizes
+     suboptimal.  */
+    __asm__ volatile ("							\n\
+        ;; Check that the register asm declaration got right.		\n\
+        ;; The GCC manual explicitly says TRT will happen.		\n\
+	.ifnc %0-%1-%2,$r13-$r11-$r12					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+									\n\
+	;; on the stack.						\n\
+	subq 	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+        ;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+        ;; Update n for the first loop					\n\
+        subq    44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+        subq   44,$r12							\n\
+        bge     0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+        addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+        movem [$sp+],$r10"
+
+     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
+     /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+
+  }
+
+  /* Either we directly starts copying, using dword copying
+     in a loop, or we copy as much as possible with 'movem'
+     and then the last block (<44 bytes) is copied here.
+     This will work since 'movem' will have updated src,dst,n. */
+
+  while ( n >= 16 )
+  {
+    *((long*)dst)++ = *((long*)src)++;
+    *((long*)dst)++ = *((long*)src)++;
+    *((long*)dst)++ = *((long*)src)++;
+    *((long*)dst)++ = *((long*)src)++;
+    n -= 16;
+  }
+
+  /* A switch() is definitely the fastest although it takes a LOT of code.
+   * Particularly if you inline code this.
+   */
+  switch (n)
+  {
+    case 0:
+      break;
+    case 1:
+      *(char*)dst = *(char*)src;
+      break;
+    case 2:
+      *(short*)dst = *(short*)src;
+      break;
+    case 3:
+      *((short*)dst)++ = *((short*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+    case 4:
+      *((long*)dst)++ = *((long*)src)++;
+      break;
+    case 5:
+      *((long*)dst)++ = *((long*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+    case 6:
+      *((long*)dst)++ = *((long*)src)++;
+      *(short*)dst = *(short*)src;
+      break;
+    case 7:
+      *((long*)dst)++ = *((long*)src)++;
+      *((short*)dst)++ = *((short*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+    case 8:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      break;
+    case 9:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+    case 10:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *(short*)dst = *(short*)src;
+      break;
+    case 11:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *((short*)dst)++ = *((short*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+    case 12:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      break;
+    case 13:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+    case 14:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *(short*)dst = *(short*)src;
+      break;
+    case 15:
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *((long*)dst)++ = *((long*)src)++;
+      *((short*)dst)++ = *((short*)src)++;
+      *(char*)dst = *(char*)src;
+      break;
+  }
+
+  return return_dst; /* destination pointer. */
+} /* memcpy() */

arch/cris/arch-v32/lib/usercopy.c

@@ -0,0 +1,470 @@
+/*
+ * User address space access functions.
+ * The non-inlined parts of asm-cris/uaccess.h are here.
+ *
+ * Copyright (C) 2000, 2003 Axis Communications AB.
+ *
+ * Written by Hans-Peter Nilsson.
+ * Pieces used from memcpy, originally by Kenny Ranerup long time ago.
+ */
+
+#include <asm/uaccess.h>
+
+/* Asm:s have been tweaked (within the domain of correctness) to give
+   satisfactory results for "gcc version 3.2.1 Axis release R53/1.53-v32".
+
+   Check regularly...
+
+   Note that for CRISv32, the PC saved at a bus-fault is the address
+   *at* the faulting instruction, with a special case for instructions
+   in delay slots: then it's the address of the branch.  Note also that
+   in contrast to v10, a postincrement in the instruction is *not*
+   performed at a bus-fault; the register is seen having the original
+   value in fault handlers.  */
+
+
+/* Copy to userspace.  This is based on the memcpy used for
+   kernel-to-kernel copying; see "string.c".  */
+
+unsigned long
+__copy_user (void __user *pdst, const void *psrc, unsigned long pn)
+{
+  /* We want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     FIXME: Comment for old gcc version.  Check.
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on. */
+
+  register char *dst __asm__ ("r13") = pdst;
+  register const char *src __asm__ ("r11") = psrc;
+  register int n __asm__ ("r12") = pn;
+  register int retn __asm__ ("r10") = 0;
+
+
+  /* When src is aligned but not dst, this makes a few extra needless
+     cycles.  I believe it would take as many to check that the
+     re-alignment was unnecessary.  */
+  if (((unsigned long) dst & 3) != 0
+      /* Don't align if we wouldn't copy more than a few bytes; so we
+	 don't have to check further for overflows.  */
+      && n >= 3)
+  {
+    if ((unsigned long) dst & 1)
+    {
+      __asm_copy_to_user_1 (dst, src, retn);
+      n--;
+    }
+
+    if ((unsigned long) dst & 2)
+    {
+      __asm_copy_to_user_2 (dst, src, retn);
+      n -= 2;
+    }
+  }
+
+  /* Movem is dirt cheap.  The overheap is low enough to always use the
+     minimum possible block size as the threshold.  */
+  if (n >= 44)
+  {
+    /* For large copies we use 'movem'.  */
+
+    /* It is not optimal to tell the compiler about clobbering any
+       registers; that will move the saving/restoring of those registers
+       to the function prologue/epilogue, and make non-movem sizes
+       suboptimal.  */
+    __asm__ volatile ("\
+        ;; Check that the register asm declaration got right.		\n\
+        ;; The GCC manual explicitly says TRT will happen.		\n\
+	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+	subq   44,$r12							\n\
+1:	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+3:									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+4:									\n\
+; When failing on any of the 1..44 bytes in a chunk, we adjust back the	\n\
+; source pointer and just drop through	to the by-16 and by-4 loops to	\n\
+; get the correct number of failing bytes.  This necessarily means a	\n\
+; few extra exceptions, but invalid user pointers shouldn't happen in	\n\
+; time-critical code anyway.						\n\
+	jump 3b								\n\
+	subq 44,$r11							\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 1b,4b							\n\
+	.previous"
+
+     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+     /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+
+  }
+
+  while (n >= 16)
+  {
+    __asm_copy_to_user_16 (dst, src, retn);
+    n -= 16;
+  }
+
+  /* Having a separate by-four loops cuts down on cache footprint.
+     FIXME:  Test with and without; increasing switch to be 0..15.  */
+  while (n >= 4)
+  {
+    __asm_copy_to_user_4 (dst, src, retn);
+    n -= 4;
+  }
+
+  switch (n)
+  {
+    case 0:
+      break;
+    case 1:
+      __asm_copy_to_user_1 (dst, src, retn);
+      break;
+    case 2:
+      __asm_copy_to_user_2 (dst, src, retn);
+      break;
+    case 3:
+      __asm_copy_to_user_3 (dst, src, retn);
+      break;
+  }
+
+  return retn;
+}
+
+/* Copy from user to kernel, zeroing the bytes that were inaccessible in
+   userland.  The return-value is the number of bytes that were
+   inaccessible.  */
+
+unsigned long
+__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+{
+  /* We want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     FIXME: Comment for old gcc version.  Check.
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
+
+  register char *dst __asm__ ("r13") = pdst;
+  register const char *src __asm__ ("r11") = psrc;
+  register int n __asm__ ("r12") = pn;
+  register int retn __asm__ ("r10") = 0;
+
+  /* The best reason to align src is that we then know that a read-fault
+     was for aligned bytes; there's no 1..3 remaining good bytes to
+     pickle.  */
+  if (((unsigned long) src & 3) != 0)
+  {
+    if (((unsigned long) src & 1) && n != 0)
+    {
+      __asm_copy_from_user_1 (dst, src, retn);
+      n--;
+    }
+
+    if (((unsigned long) src & 2) && n >= 2)
+    {
+      __asm_copy_from_user_2 (dst, src, retn);
+      n -= 2;
+    }
+
+    /* We only need one check after the unalignment-adjustments, because
+       if both adjustments were done, either both or neither reference
+       had an exception.  */
+    if (retn != 0)
+      goto copy_exception_bytes;
+  }
+
+  /* Movem is dirt cheap.  The overheap is low enough to always use the
+     minimum possible block size as the threshold.  */
+  if (n >= 44)
+  {
+    /* It is not optimal to tell the compiler about clobbering any
+       registers; that will move the saving/restoring of those registers
+       to the function prologue/epilogue, and make non-movem sizes
+       suboptimal.  */
+    __asm__ volatile ("\
+	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+									\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+4:									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+;; Do not jump back into the loop if we fail.  For some uses, we get a	\n\
+;; page fault somewhere on the line.  Without checking for page limits,	\n\
+;; we don't know where, but we need to copy accurately and keep an	\n\
+;; accurate count; not just clear the whole line.  To do that, we fall	\n\
+;; down in the code below, proceeding with smaller amounts.  It should	\n\
+;; be kept in mind that we have to cater to code like what at one time	\n\
+;; was in fs/super.c:							\n\
+;;  i = size - copy_from_user((void *)page, data, size);		\n\
+;; which would cause repeated faults while clearing the remainder of	\n\
+;; the SIZE bytes at PAGE after the first fault.			\n\
+;; A caveat here is that we must not fall through from a failing page	\n\
+;; to a valid page.							\n\
+									\n\
+3:									\n\
+	jump	4b ;; Fall through, pretending the fault didn't happen.	\n\
+	nop								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.previous"
+
+     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
+     /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn));
+  }
+
+  /* Either we directly start copying here, using dword copying in a loop,
+     or we copy as much as possible with 'movem' and then the last block
+     (<44 bytes) is copied here.  This will work since 'movem' will have
+     updated src, dst and n.  (Except with failing src.)
+
+     Since we want to keep src accurate, we can't use
+     __asm_copy_from_user_N with N != (1, 2, 4); it updates dst and
+     retn, but not src (by design; it's value is ignored elsewhere).  */
+
+  while (n >= 4)
+  {
+    __asm_copy_from_user_4 (dst, src, retn);
+    n -= 4;
+
+    if (retn)
+      goto copy_exception_bytes;
+  }
+
+  /* If we get here, there were no memory read faults.  */
+  switch (n)
+  {
+    /* These copies are at least "naturally aligned" (so we don't have
+       to check each byte), due to the src alignment code before the
+       movem loop.  The *_3 case *will* get the correct count for retn.  */
+    case 0:
+      /* This case deliberately left in (if you have doubts check the
+	 generated assembly code).  */
+      break;
+    case 1:
+      __asm_copy_from_user_1 (dst, src, retn);
+      break;
+    case 2:
+      __asm_copy_from_user_2 (dst, src, retn);
+      break;
+    case 3:
+      __asm_copy_from_user_3 (dst, src, retn);
+      break;
+  }
+
+  /* If we get here, retn correctly reflects the number of failing
+     bytes.  */
+  return retn;
+
+copy_exception_bytes:
+  /* We already have "retn" bytes cleared, and need to clear the
+     remaining "n" bytes.  A non-optimized simple byte-for-byte in-line
+     memset is preferred here, since this isn't speed-critical code and
+     we'd rather have this a leaf-function than calling memset.  */
+  {
+    char *endp;
+    for (endp = dst + n; dst < endp; dst++)
+      *dst = 0;
+  }
+
+  return retn + n;
+}
+
+/* Zero userspace.  */
+
+unsigned long
+__do_clear_user (void __user *pto, unsigned long pn)
+{
+  /* We want the parameters put in special registers.
+     Make sure the compiler is able to make something useful of this.
+      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+
+     FIXME: Comment for old gcc version.  Check.
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on. */
+
+  register char *dst __asm__ ("r13") = pto;
+  register int n __asm__ ("r12") = pn;
+  register int retn __asm__ ("r10") = 0;
+
+
+  if (((unsigned long) dst & 3) != 0
+     /* Don't align if we wouldn't copy more than a few bytes.  */
+      && n >= 3)
+  {
+    if ((unsigned long) dst & 1)
+    {
+      __asm_clear_1 (dst, retn);
+      n--;
+    }
+
+    if ((unsigned long) dst & 2)
+    {
+      __asm_clear_2 (dst, retn);
+      n -= 2;
+    }
+  }
+
+  /* Decide which copying method to use.
+     FIXME: This number is from the "ordinary" kernel memset.  */
+  if (n >= 48)
+  {
+    /* For large clears we use 'movem' */
+
+    /* It is not optimal to tell the compiler about clobbering any
+       call-saved registers; that will move the saving/restoring of
+       those registers to the function prologue/epilogue, and make
+       non-movem sizes suboptimal.
+
+       This method is not foolproof; it assumes that the "asm reg"
+       declarations at the beginning of the function really are used
+       here (beware: they may be moved to temporary registers).
+       This way, we do not have to save/move the registers around into
+       temporaries; we can safely use them straight away.
+
+      If you want to check that the allocation was right; then
+      check the equalities in the first comment.  It should say
+      something like "r13=r13, r11=r11, r12=r12". */
+    __asm__ volatile ("\
+	.ifnc %0%1%2,$r13$r12$r10					\n\
+	.err								\n\
+	.endif								\n\
+									\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	clear.d $r0							\n\
+	clear.d $r1							\n\
+	clear.d $r2							\n\
+	clear.d $r3							\n\
+	clear.d $r4							\n\
+	clear.d $r5							\n\
+	clear.d $r6							\n\
+	clear.d $r7							\n\
+	clear.d $r8							\n\
+	clear.d $r9							\n\
+	clear.d $r10							\n\
+	clear.d $r11							\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	12*4,$r12						\n\
+0:									\n\
+	subq   12*4,$r12						\n\
+1:									\n\
+	bge	0b							\n\
+	movem	$r11,[$r13+]						\n\
+									\n\
+	addq   12*4,$r12 ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+3:									\n\
+	movem [$sp],$r10						\n\
+	addq 12*4,$r10							\n\
+	addq 12*4,$r13							\n\
+	movem $r10,[$sp]						\n\
+	jump 0b								\n\
+	clear.d $r10							\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 1b,3b							\n\
+	.previous"
+
+     /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)
+     /* Inputs */ : "0" (dst), "1" (n), "2" (retn)
+     /* Clobber */ : "r11");
+  }
+
+  while (n >= 16)
+  {
+    __asm_clear_16 (dst, retn);
+    n -= 16;
+  }
+
+  /* Having a separate by-four loops cuts down on cache footprint.
+     FIXME:  Test with and without; increasing switch to be 0..15.  */
+  while (n >= 4)
+  {
+    __asm_clear_4 (dst, retn);
+    n -= 4;
+  }
+
+  switch (n)
+  {
+    case 0:
+      break;
+    case 1:
+      __asm_clear_1 (dst, retn);
+      break;
+    case 2:
+      __asm_clear_2 (dst, retn);
+      break;
+    case 3:
+      __asm_clear_3 (dst, retn);
+      break;
+  }
+
+  return retn;
+}

arch/cris/arch-v32/mm/Makefile

@@ -0,0 +1,3 @@
+# Makefile for the Linux/cris parts of the memory manager.
+
+obj-y	 := mmu.o init.o tlb.o intmem.o

arch/cris/arch-v32/mm/init.c

@@ -0,0 +1,174 @@
+/*
+ * Set up paging and the MMU.
+ *
+ * Copyright (C) 2000-2003, Axis Communications AB.
+ *
+ * Authors:   Bjorn Wesen <bjornw@axis.com>
+ *            Tobias Anderberg <tobiasa@axis.com>, CRISv32 port.
+ */
+#include <linux/config.h>
+#include <linux/mmzone.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/config.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
+#include <asm/arch/hwregs/supp_reg.h>
+
+extern void tlb_init(void);
+
+/*
+ * The kernel is already mapped with linear mapping at kseg_c so there's no
+ * need to map it with a page table. However, head.S also temporarily mapped it
+ * at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various
+ * other paging stuff.
+ */
+void __init
+cris_mmu_init(void)
+{
+	unsigned long mmu_config;
+	unsigned long mmu_kbase_hi;
+	unsigned long mmu_kbase_lo;
+	unsigned short mmu_page_id;
+
+	/*
+	 * Make sure the current pgd table points to something sane, even if it
+	 * is most probably not used until the next switch_mm.
+	 */
+	per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd;
+
+#ifdef CONFIG_SMP
+	{
+		pgd_t **pgd;
+		pgd = (pgd_t**)&per_cpu(current_pgd, smp_processor_id());
+		SUPP_BANK_SEL(1);
+		SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
+		SUPP_BANK_SEL(2);
+		SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
+	}
+#endif
+
+	/* Initialise the TLB. Function found in tlb.c. */
+	tlb_init();
+
+	/* Enable exceptions and initialize the kernel segments. */
+	mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on)        |
+		       REG_STATE(mmu, rw_mm_cfg, acc, on)       |
+		       REG_STATE(mmu, rw_mm_cfg, ex, on)        |
+		       REG_STATE(mmu, rw_mm_cfg, inv, on)       |
+		       REG_STATE(mmu, rw_mm_cfg, seg_f, linear) |
+		       REG_STATE(mmu, rw_mm_cfg, seg_e, linear) |
+		       REG_STATE(mmu, rw_mm_cfg, seg_d, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
+		       REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
+#ifndef CONFIG_ETRAXFS_SIM
+                       REG_STATE(mmu, rw_mm_cfg, seg_a, page)   |
+#else
+		       REG_STATE(mmu, rw_mm_cfg, seg_a, linear) |
+#endif
+		       REG_STATE(mmu, rw_mm_cfg, seg_9, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_8, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_7, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_6, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_5, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_4, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_3, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_2, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_1, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_0, page));
+
+	mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) |
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) |
+#ifndef CONFIG_ETRAXFS_SIM
+                         REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
+#else
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x0) |
+#endif
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
+#ifndef CONFIG_ETRAXFS_SIM
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0x0) |
+#else
+                         REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa) |
+#endif
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_9, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_8, 0x0));
+
+	mmu_kbase_lo = ( REG_FIELD(mmu, rw_mm_kbase_lo, base_7, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_6, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_5, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_3, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_2, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_1, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_lo, base_0, 0x0));
+
+	mmu_page_id = REG_FIELD(mmu, rw_mm_tlb_hi, pid, 0);
+
+	/* Update the instruction MMU. */
+	SUPP_BANK_SEL(BANK_IM);
+	SUPP_REG_WR(RW_MM_CFG, mmu_config);
+	SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi);
+	SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo);
+	SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id);
+
+	/* Update the data MMU. */
+	SUPP_BANK_SEL(BANK_DM);
+	SUPP_REG_WR(RW_MM_CFG, mmu_config);
+	SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi);
+	SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo);
+	SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id);
+
+	SPEC_REG_WR(SPEC_REG_PID, 0);
+
+	/*
+	 * The MMU has been enabled ever since head.S but just to make it
+	 * totally obvious enable it here as well.
+	 */
+	SUPP_BANK_SEL(BANK_GC);
+	SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */
+}
+
+void __init
+paging_init(void)
+{
+	int i;
+	unsigned long zones_size[MAX_NR_ZONES];
+
+	printk("Setting up paging and the MMU.\n");
+
+	/* Clear out the init_mm.pgd that will contain the kernel's mappings. */
+	for(i = 0; i < PTRS_PER_PGD; i++)
+		swapper_pg_dir[i] = __pgd(0);
+
+	cris_mmu_init();
+
+	/*
+	 * Initialize the bad page table and bad page to point to a couple of
+	 * allocated pages.
+	 */
+	empty_zero_page = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+	memset((void *) empty_zero_page, 0, PAGE_SIZE);
+
+	/* All pages are DMA'able in Etrax, so put all in the DMA'able zone. */
+	zones_size[0] = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+
+	for (i = 1; i < MAX_NR_ZONES; i++)
+		zones_size[i] = 0;
+
+	/*
+	 * Use free_area_init_node instead of free_area_init, because it is
+	 * designed for systems where the DRAM starts at an address
+	 * substantially higher than 0, like us (we start at PAGE_OFFSET). This
+	 * saves space in the mem_map page array.
+	 */
+	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+
+	mem_map = contig_page_data.node_mem_map;
+}

arch/cris/arch-v32/mm/intmem.c

@@ -0,0 +1,139 @@
+/*
+ * Simple allocator for internal RAM in ETRAX FS
+ *
+ * Copyright (c) 2004 Axis Communications AB.
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <asm/arch/memmap.h>
+
+#define STATUS_FREE 0
+#define STATUS_ALLOCATED 1
+
+struct intmem_allocation {
+	struct list_head entry;
+	unsigned int size;
+	unsigned offset;
+	char status;
+};
+
+
+static struct list_head intmem_allocations;
+static void* intmem_virtual;
+
+static void crisv32_intmem_init(void)
+{
+	static int initiated = 0;
+	if (!initiated) {
+		struct intmem_allocation* alloc =
+		  (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL);
+		INIT_LIST_HEAD(&intmem_allocations);
+		intmem_virtual = ioremap(MEM_INTMEM_START, MEM_INTMEM_SIZE);
+		initiated = 1;
+		alloc->size = MEM_INTMEM_SIZE;
+		alloc->offset = 0;
+		alloc->status = STATUS_FREE;
+		list_add_tail(&alloc->entry, &intmem_allocations);
+	}
+}
+
+void* crisv32_intmem_alloc(unsigned size, unsigned align)
+{
+	struct intmem_allocation* allocation;
+	struct intmem_allocation* tmp;
+	void* ret = NULL;
+
+	preempt_disable();
+	crisv32_intmem_init();
+
+	list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) {
+		int alignment = allocation->offset % align;
+		alignment = alignment ? align - alignment : alignment;
+
+		if (allocation->status == STATUS_FREE &&
+		    allocation->size >= size + alignment) {
+			if (allocation->size > size + alignment) {
+				struct intmem_allocation* alloc =
+					(struct intmem_allocation*)
+					kmalloc(sizeof *alloc, GFP_ATOMIC);
+				alloc->status = STATUS_FREE;
+				alloc->size = allocation->size - size - alignment;
+				alloc->offset = allocation->offset + size;
+				list_add(&alloc->entry, &allocation->entry);
+
+				if (alignment) {
+					struct intmem_allocation* tmp;
+					tmp = (struct intmem_allocation*)
+						kmalloc(sizeof *tmp, GFP_ATOMIC);
+					tmp->offset = allocation->offset;
+					tmp->size = alignment;
+					tmp->status = STATUS_FREE;
+					allocation->offset += alignment;
+					list_add_tail(&tmp->entry, &allocation->entry);
+				}
+			}
+			allocation->status = STATUS_ALLOCATED;
+			allocation->size = size;
+			ret = (void*)((int)intmem_virtual + allocation->offset);
+		}
+	}
+	preempt_enable();
+	return ret;
+}
+
+void crisv32_intmem_free(void* addr)
+{
+	struct intmem_allocation* allocation;
+	struct intmem_allocation* tmp;
+
+	if (addr == NULL)
+		return;
+
+	preempt_disable();
+	crisv32_intmem_init();
+
+	list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) {
+		if (allocation->offset == (int)(addr - intmem_virtual)) {
+			struct intmem_allocation* prev =
+			  list_entry(allocation->entry.prev,
+			             struct intmem_allocation, entry);
+			struct intmem_allocation* next =
+			  list_entry(allocation->entry.next,
+				     struct intmem_allocation, entry);
+
+			allocation->status = STATUS_FREE;
+			/* Join with prev and/or next if also free */
+			if (prev->status == STATUS_FREE) {
+				prev->size += allocation->size;
+				list_del(&allocation->entry);
+				kfree(allocation);
+				allocation = prev;
+			}
+			if (next->status == STATUS_FREE) {
+				allocation->size += next->size;
+				list_del(&next->entry);
+				kfree(next);
+			}
+			preempt_enable();
+			return;
+		}
+	}
+	preempt_enable();
+}
+
+void* crisv32_intmem_phys_to_virt(unsigned long addr)
+{
+	return (void*)(addr - MEM_INTMEM_START+
+	               (unsigned long)intmem_virtual);
+}
+
+unsigned long crisv32_intmem_virt_to_phys(void* addr)
+{
+	return (unsigned long)((unsigned long )addr -
+	  (unsigned long)intmem_virtual + MEM_INTMEM_START);
+}
+
+
+

arch/cris/arch-v32/mm/mmu.S

@@ -0,0 +1,141 @@
+/*
+ *  Copyright (C) 2003 Axis Communications AB
+ *
+ *  Authors:	Mikael Starvik (starvik@axis.com)
+ *
+ * Code for the fault low-level handling routines.
+ *
+ */
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+; Save all register. Must save in same order as struct pt_regs.
+.macro SAVE_ALL
+	subq	12, $sp
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp
+	movem	$r13, [$sp]
+	subq	4, $sp
+	move.d	$r10, [$sp]
+.endm
+
+; Bus fault handler. Extracts relevant information and calls mm subsystem
+; to handle the fault.
+.macro	MMU_BUS_FAULT_HANDLER handler, mmu, we, ex
+	.globl	\handler
+\handler:
+	SAVE_ALL
+	move	\mmu, $srs	; Select MMU support register bank
+	move.d  $sp, $r11	; regs
+	moveq	1, $r12		; protection fault
+	moveq   \we, $r13	; write exception?
+	orq	\ex << 1, $r13	; execute?
+	move    $s3, $r10	; rw_mm_cause
+	and.d	~8191, $r10	; Get faulting page start address
+
+	jsr	do_page_fault
+	nop
+	ba	ret_from_intr
+	nop
+.endm
+
+; Refill handler. Three cases may occur:
+;   1. PMD and PTE exists in mm subsystem but not in TLB
+;   2. PMD exists but not PTE
+;   3. PMD doesn't exist
+; The code below handles case 1 and calls the mm subsystem for case 2 and 3.
+; Do not touch this code without very good reasons and extensive testing.
+; Note that the code is optimized to minimize stalls (makes the code harder
+; to read).
+;
+; Each page is 8 KB. Each PMD holds 8192/4 PTEs (each PTE is 4 bytes) so each
+; PMD holds 16 MB of virtual memory.
+;   Bits  0-12 : Offset within a page
+;   Bits 13-23 : PTE offset within a PMD
+;   Bits 24-31 : PMD offset within the PGD
+
+.macro MMU_REFILL_HANDLER handler, mmu
+	.globl \handler
+\handler:
+	subq	4, $sp
+; (The pipeline stalls for one cycle; $sp used as address in the next cycle.)
+	move	$srs, [$sp]
+	subq	4, $sp
+	move	\mmu, $srs	; Select MMU support register bank
+	move.d	$acr, [$sp]
+	subq	4, $sp
+	move.d	$r0, [$sp]
+#ifdef CONFIG_SMP
+	move    $s7, $acr	; PGD
+#else
+	move.d  per_cpu__current_pgd, $acr ; PGD
+#endif
+	; Look up PMD in PGD
+	move	$s3, $r0	; rw_mm_cause
+	lsrq	24, $r0	; Get PMD index into PGD (bit 24-31)
+	move.d  [$acr], $acr	; PGD for the current process
+	addi	$r0.d, $acr, $acr
+	move	$s3, $r0	; rw_mm_cause
+	move.d  [$acr], $acr	; Get PMD
+	beq	1f
+	; Look up PTE in PMD
+	lsrq	PAGE_SHIFT, $r0
+	and.w	PAGE_MASK, $acr	; Remove PMD flags
+	and.d	0x7ff, $r0	; Get PTE index into PMD (bit 13-23)
+	addi    $r0.d, $acr, $acr
+	move.d  [$acr], $acr	; Get PTE
+	beq	2f
+	move.d  [$sp+], $r0	; Pop r0 in delayslot
+	; Store in TLB
+	move	$acr, $s5
+	; Return
+	move.d	[$sp+], $acr
+	move  	[$sp], $srs
+	addq	4, $sp
+	rete
+	rfe
+1:	; PMD missing, let the mm subsystem fix it up.
+	move.d  [$sp+], $r0	; Pop r0
+2:      ; PTE missing, let the mm subsystem fix it up.
+	move.d	[$sp+], $acr
+	move  	[$sp], $srs
+	addq	4, $sp
+	SAVE_ALL
+	move    \mmu, $srs
+	move.d	$sp, $r11	; regs
+	clear.d	$r12		; Not a protection fault
+	move.w  PAGE_MASK, $acr
+	move    $s3, $r10	; rw_mm_cause
+	btstq   9, $r10		; Check if write access
+	smi     $r13
+	and.w	PAGE_MASK, $r10	; Get VPN (virtual address)
+	jsr	do_page_fault
+	and.w   $acr, $r10
+	; Return
+	ba	ret_from_intr
+	nop
+.endm
+
+	; This is the MMU bus fault handlers.
+
+MMU_REFILL_HANDLER i_mmu_refill, 1
+MMU_BUS_FAULT_HANDLER i_mmu_invalid, 1, 0, 0
+MMU_BUS_FAULT_HANDLER i_mmu_access,  1, 0, 0
+MMU_BUS_FAULT_HANDLER i_mmu_execute, 1, 0, 1
+MMU_REFILL_HANDLER d_mmu_refill,  2
+MMU_BUS_FAULT_HANDLER d_mmu_invalid, 2, 0, 0
+MMU_BUS_FAULT_HANDLER d_mmu_access,  2, 0, 0
+MMU_BUS_FAULT_HANDLER d_mmu_write,   2, 1, 0

arch/cris/arch-v32/mm/tlb.c

@@ -0,0 +1,208 @@
+/*
+ * Low level TLB handling.
+ *
+ * Copyright (C) 2000-2003, Axis Communications AB.
+ *
+ * Authors:   Bjorn Wesen <bjornw@axis.com>
+ *            Tobias Anderberg <tobiasa@axis.com>, CRISv32 port.
+ */
+
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
+#include <asm/arch/hwregs/supp_reg.h>
+
+#define UPDATE_TLB_SEL_IDX(val)					\
+do { 								\
+	unsigned long tlb_sel; 					\
+								\
+	tlb_sel = REG_FIELD(mmu, rw_mm_tlb_sel, idx, val);	\
+	SUPP_REG_WR(RW_MM_TLB_SEL, tlb_sel);			\
+} while(0)
+
+#define UPDATE_TLB_HILO(tlb_hi, tlb_lo)		\
+do {						\
+	SUPP_REG_WR(RW_MM_TLB_HI, tlb_hi);	\
+	SUPP_REG_WR(RW_MM_TLB_LO, tlb_lo);	\
+} while(0)
+
+/*
+ * The TLB can host up to 256 different mm contexts at the same time. The running
+ * context is found in the PID register. Each TLB entry contains a page_id that
+ * has to match the PID register to give a hit. page_id_map keeps track of which
+ * mm's is assigned to which page_id's, making sure it's known when to
+ * invalidate TLB entries.
+ *
+ * The last page_id is never running, it is used as an invalid page_id so that
+ * it's possible to make TLB entries that will nerver match.
+ *
+ * Note; the flushes needs to be atomic otherwise an interrupt hander that uses
+ * vmalloc'ed memory might cause a TLB load in the middle of a flush.
+ */
+
+/* Flush all TLB entries. */
+void
+__flush_tlb_all(void)
+{
+	int i;
+	int mmu;
+	unsigned long flags;
+	unsigned long mmu_tlb_hi;
+	unsigned long mmu_tlb_sel;
+
+	/*
+	 * Mask with 0xf so similar TLB entries aren't written in the same 4-way
+	 * entry group.
+	 */
+	local_save_flags(flags);
+	local_irq_disable();
+
+	for (mmu = 1; mmu <= 2; mmu++) {
+		SUPP_BANK_SEL(mmu); /* Select the MMU */
+		for (i = 0; i < NUM_TLB_ENTRIES; i++) {
+			/* Store invalid entry */
+			mmu_tlb_sel = REG_FIELD(mmu, rw_mm_tlb_sel, idx, i);
+
+			mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid, INVALID_PAGEID)
+				    | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, i & 0xf));
+
+			SUPP_REG_WR(RW_MM_TLB_SEL, mmu_tlb_sel);
+			SUPP_REG_WR(RW_MM_TLB_HI, mmu_tlb_hi);
+			SUPP_REG_WR(RW_MM_TLB_LO, 0);
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/* Flush an entire user address space. */
+void
+__flush_tlb_mm(struct mm_struct *mm)
+{
+	int i;
+	int mmu;
+	unsigned long flags;
+	unsigned long page_id;
+	unsigned long tlb_hi;
+	unsigned long mmu_tlb_hi;
+
+	page_id = mm->context.page_id;
+
+	if (page_id == NO_CONTEXT)
+		return;
+
+	/* Mark the TLB entries that match the page_id as invalid. */
+	local_save_flags(flags);
+	local_irq_disable();
+
+	for (mmu = 1; mmu <= 2; mmu++) {
+		SUPP_BANK_SEL(mmu);
+		for (i = 0; i < NUM_TLB_ENTRIES; i++) {
+			UPDATE_TLB_SEL_IDX(i);
+
+			/* Get the page_id */
+			SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi);
+
+			/* Check if the page_id match. */
+			if ((tlb_hi & 0xff) == page_id) {
+				mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid,
+				                        INVALID_PAGEID)
+				            | REG_FIELD(mmu, rw_mm_tlb_hi, vpn,
+				                        i & 0xf));
+
+				UPDATE_TLB_HILO(mmu_tlb_hi, 0);
+			}
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/* Invalidate a single page. */
+void
+__flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	int i;
+	int mmu;
+	unsigned long page_id;
+	unsigned long flags;
+	unsigned long tlb_hi;
+	unsigned long mmu_tlb_hi;
+
+	page_id = vma->vm_mm->context.page_id;
+
+	if (page_id == NO_CONTEXT)
+		return;
+
+	addr &= PAGE_MASK;
+
+	/*
+	 * Invalidate those TLB entries that match both the mm context and the
+	 * requested virtual address.
+	 */
+	local_save_flags(flags);
+	local_irq_disable();
+
+	for (mmu = 1; mmu <= 2; mmu++) {
+		SUPP_BANK_SEL(mmu);
+		for (i = 0; i < NUM_TLB_ENTRIES; i++) {
+			UPDATE_TLB_SEL_IDX(i);
+			SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi);
+
+			/* Check if page_id and address matches */
+			if (((tlb_hi & 0xff) == page_id) &&
+			    ((tlb_hi & PAGE_MASK) == addr)) {
+				mmu_tlb_hi = REG_FIELD(mmu, rw_mm_tlb_hi, pid,
+				                       INVALID_PAGEID) | addr;
+
+				UPDATE_TLB_HILO(mmu_tlb_hi, 0);
+			}
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+
+int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context.page_id = NO_CONTEXT;
+	return 0;
+}
+
+/* Called in schedule() just before actually doing the switch_to. */
+void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+	int cpu = smp_processor_id();
+
+	/* Make sure there is a MMU context. */
+	spin_lock(&next->page_table_lock);
+	get_mmu_context(next);
+	cpu_set(cpu, next->cpu_vm_mask);
+	spin_unlock(&next->page_table_lock);
+
+	/*
+	 * Remember the pgd for the fault handlers. Keep a seperate copy of it
+	 * because current and active_mm might be invalid at points where
+	 * there's still a need to derefer the pgd.
+	 */
+	per_cpu(current_pgd, cpu) = next->pgd;
+
+	/* Switch context in the MMU. */
+        if (tsk && tsk->thread_info)
+        {
+          SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | tsk->thread_info->tls);
+        }
+        else
+        {
+          SPEC_REG_WR(SPEC_REG_PID, next->context.page_id);
+        }
+}
+

arch/cris/arch-v32/output_arch.ld

@@ -0,0 +1,2 @@
+/* At the time of this writing, there's no equivalent ld option. */
+OUTPUT_ARCH (crisv32)

arch/cris/arch-v32/vmlinux.lds.S

@@ -0,0 +1,134 @@
+/* ld script to make the Linux/CRIS kernel
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ *
+ * It is VERY DANGEROUS to fiddle around with the symbols in this
+ * script. It is for example quite vital that all generated sections
+ * that are used are actually named here, otherwise the linker will
+ * put them at the end, where the init stuff is which is FREED after
+ * the kernel has booted.
+ */
+
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+
+jiffies = jiffies_64;
+SECTIONS
+{
+	. = DRAM_VIRTUAL_BASE;
+	dram_start = .;
+	ebp_start = .;
+
+	/* The boot section is only necessary until the VCS top level testbench */
+	/* includes both flash and DRAM. */
+	.boot : { *(.boot) }
+
+	. = DRAM_VIRTUAL_BASE + 0x4000;		/* See head.S and pages reserved at the start. */
+
+	_text = .;		/* Text and read-only data. */
+	text_start = .;		/* Lots of aliases. */
+	_stext = .;
+	__stext = .;
+	.text : {
+		*(.text)
+		SCHED_TEXT
+		LOCK_TEXT
+		*(.fixup)
+		*(.text.__*)
+	}
+
+	_etext = . ;		/* End of text section. */
+	__etext = .;
+
+	. = ALIGN(4);		/* Exception table. */
+  	__start___ex_table = .;
+  	__ex_table : { *(__ex_table) }
+  	__stop___ex_table = .;
+
+	RODATA
+
+	. = ALIGN (4);
+	___data_start = . ;
+	__Sdata = . ;
+	.data : {                     /* Data */
+		*(.data)
+	}
+	__edata = . ;		/* End of data section. */
+	_edata = . ;
+
+	. = ALIGN(8192);	/* init_task and stack, must be aligned. */
+  	.data.init_task : { *(.data.init_task) }
+
+  	. = ALIGN(8192);	/* Init code and data. */
+  	__init_begin = .;
+	.init.text : {
+		   _sinittext = .;
+		   *(.init.text)
+		   _einittext = .;
+	}
+  	.init.data : { *(.init.data) }
+  	. = ALIGN(16);
+  	__setup_start = .;
+  	.init.setup : { *(.init.setup) }
+  	__setup_end = .;
+	__start___param = .;
+	__param : { *(__param) }
+	__stop___param = .;
+  	.initcall.init : {
+		__initcall_start = .;
+		*(.initcall1.init);
+		*(.initcall2.init);
+		*(.initcall3.init);
+		*(.initcall4.init);
+		*(.initcall5.init);
+		*(.initcall6.init);
+		*(.initcall7.init);
+		__initcall_end = .;
+	}
+
+	.con_initcall.init : {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+	SECURITY_INIT
+
+	__per_cpu_start = .;
+	.data.percpu  : { *(.data.percpu) }
+	__per_cpu_end = .;
+
+	.init.ramfs : {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+		/*
+		 * We fill to the next page, so we can discard all init
+		 * pages without needing to consider what payload might be
+		 * appended to the kernel image.
+		 */
+		FILL (0);
+		. = ALIGN (8192);
+	}
+
+	__vmlinux_end = .;	/* Last address of the physical file. */
+  	__init_end = .;
+
+	__data_end = . ;	/* Move to _edata? */
+	__bss_start = .;	/* BSS. */
+	.bss : {
+		*(COMMON)
+		*(.bss)
+	}
+
+	. =  ALIGN (0x20);
+	_end = .;
+	__end = .;
+
+	/* Sections to be discarded */
+  	/DISCARD/ : {
+        	*(.text.exit)
+        	*(.data.exit)
+		*(.exitcall.exit)
+        }
+
+	dram_end = dram_start + CONFIG_ETRAX_DRAM_SIZE*1024*1024;
+}

include/asm-cris/arch-v32/arbiter.h

@@ -0,0 +1,30 @@
+#ifndef _ASM_CRIS_ARCH_ARBITER_H
+#define _ASM_CRIS_ARCH_ARBITER_H
+
+#define EXT_REGION 0
+#define INT_REGION 1
+
+typedef void (watch_callback)(void);
+
+enum
+{
+  arbiter_all_dmas = 0x3ff,
+  arbiter_cpu = 0xc00,
+  arbiter_all_clients = 0x3fff
+};
+
+enum
+{
+  arbiter_all_read = 0x55,
+  arbiter_all_write = 0xaa,
+  arbiter_all_accesses = 0xff
+};
+
+int crisv32_arbiter_allocate_bandwith(int client, int region,
+                                      unsigned long bandwidth);
+int crisv32_arbiter_watch(unsigned long start, unsigned long size,
+                          unsigned long clients, unsigned long accesses,
+                          watch_callback* cb);
+int crisv32_arbiter_unwatch(int id);
+
+#endif

include/asm-cris/arch-v32/atomic.h

@@ -0,0 +1,36 @@
+#ifndef __ASM_CRIS_ARCH_ATOMIC__
+#define __ASM_CRIS_ARCH_ATOMIC__
+
+#include <asm/system.h>
+
+extern void cris_spin_unlock(void *l, int val);
+extern void cris_spin_lock(void *l);
+extern int cris_spin_trylock(void* l);
+
+#ifndef CONFIG_SMP
+#define cris_atomic_save(addr, flags) local_irq_save(flags);
+#define cris_atomic_restore(addr, flags) local_irq_restore(flags);
+#else
+
+extern spinlock_t cris_atomic_locks[];
+#define LOCK_COUNT 128
+#define HASH_ADDR(a) (((int)a) & 127)
+
+#define cris_atomic_save(addr, flags) \
+  local_irq_save(flags); \
+  cris_spin_lock((void*)&cris_atomic_locks[HASH_ADDR(addr)].lock);
+
+#define cris_atomic_restore(addr, flags) \
+  { \
+    spinlock_t *lock = (void*)&cris_atomic_locks[HASH_ADDR(addr)]; \
+    __asm__ volatile ("move.d %1,%0" \
+	                  : "=m" (lock->lock) \
+			  : "r" (1) \
+			  : "memory"); \
+    local_irq_restore(flags); \
+  }
+
+#endif
+
+#endif
+

include/asm-cris/arch-v32/bitops.h

@@ -0,0 +1,64 @@
+#ifndef _ASM_CRIS_ARCH_BITOPS_H
+#define _ASM_CRIS_ARCH_BITOPS_H
+
+/*
+ * Helper functions for the core of the ff[sz] functions. They compute the
+ * number of leading zeroes of a bits-in-byte, byte-in-word and
+ * word-in-dword-swapped number. They differ in that the first function also
+ * inverts all bits in the input.
+ */
+
+extern inline unsigned long
+cris_swapnwbrlz(unsigned long w)
+{
+	unsigned long res;
+
+	__asm__ __volatile__ ("swapnwbr %0\n\t"
+			      "lz %0,%0"
+			      : "=r" (res) : "0" (w));
+
+	return res;
+}
+
+extern inline unsigned long
+cris_swapwbrlz(unsigned long w)
+{
+	unsigned long res;
+
+	__asm__ __volatile__ ("swapwbr %0\n\t"
+			      "lz %0,%0"
+			      : "=r" (res) : "0" (w));
+
+	return res;
+}
+
+/*
+ * Find First Zero in word. Undefined if no zero exist, so the caller should
+ * check against ~0 first.
+ */
+extern inline unsigned long
+ffz(unsigned long w)
+{
+	return cris_swapnwbrlz(w);
+}
+
+/*
+ * Find First Set bit in word. Undefined if no 1 exist, so the caller
+ * should check against 0 first.
+ */
+extern inline unsigned long
+__ffs(unsigned long w)
+{
+	return cris_swapnwbrlz(~w);
+}
+
+/*
+ * Find First Bit that is set.
+ */
+extern inline unsigned long
+kernel_ffs(unsigned long w)
+{
+	return w ? cris_swapwbrlz (w) + 1 : 0;
+}
+
+#endif /* _ASM_CRIS_ARCH_BITOPS_H */

include/asm-cris/arch-v32/byteorder.h

@@ -0,0 +1,20 @@
+#ifndef _ASM_CRIS_ARCH_BYTEORDER_H
+#define _ASM_CRIS_ARCH_BYTEORDER_H
+
+#include <asm/types.h>
+
+extern __inline__ __const__ __u32
+___arch__swab32(__u32 x)
+{
+	__asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
+	return (x);
+}
+
+extern __inline__ __const__ __u16
+___arch__swab16(__u16 x)
+{
+	__asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
+	return (x);
+}
+
+#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */

include/asm-cris/arch-v32/cache.h

@@ -0,0 +1,9 @@
+#ifndef _ASM_CRIS_ARCH_CACHE_H
+#define _ASM_CRIS_ARCH_CACHE_H
+
+/* A cache-line is 32 bytes. */
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_SHIFT_MAX 5
+
+#endif /* _ASM_CRIS_ARCH_CACHE_H */

include/asm-cris/arch-v32/checksum.h

@@ -0,0 +1,29 @@
+#ifndef _ASM_CRIS_ARCH_CHECKSUM_H
+#define _ASM_CRIS_ARCH_CHECKSUM_H
+
+/*
+ * Check values used in TCP/UDP headers.
+ *
+ * The gain of doing this in assembler instead of C, is that C doesn't
+ * generate carry-additions for the 32-bit components of the
+ * checksum. Which means it would be necessary to split all those into
+ * 16-bit components and then add.
+ */
+extern inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
+		   unsigned short len, unsigned short proto, unsigned int sum)
+{
+	int res;
+
+	__asm__ __volatile__ ("add.d %2, %0\n\t"
+			      "addc %3, %0\n\t"
+			      "addc %4, %0\n\t"
+			      "addc 0, %0\n\t"
+			      : "=r" (res)
+			      : "0" (sum), "r" (daddr), "r" (saddr), \
+			      "r" ((ntohs(len) << 16) + (proto << 8)));
+
+	return res;
+}
+
+#endif /* _ASM_CRIS_ARCH_CHECKSUM_H */

include/asm-cris/arch-v32/cryptocop.h

@@ -0,0 +1,272 @@
+/*
+ * The device /dev/cryptocop is accessible using this driver using
+ * CRYPTOCOP_MAJOR (254) and minor number 0.
+ */
+
+#ifndef CRYPTOCOP_H
+#define CRYPTOCOP_H
+
+#include <linux/uio.h>
+
+
+#define CRYPTOCOP_SESSION_ID_NONE (0)
+
+typedef unsigned long long int cryptocop_session_id;
+
+/* cryptocop ioctls */
+#define ETRAXCRYPTOCOP_IOCTYPE         (250)
+
+#define CRYPTOCOP_IO_CREATE_SESSION    _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 1, struct strcop_session_op)
+#define CRYPTOCOP_IO_CLOSE_SESSION     _IOW(ETRAXCRYPTOCOP_IOCTYPE, 2, struct strcop_session_op)
+#define CRYPTOCOP_IO_PROCESS_OP        _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 3, struct strcop_crypto_op)
+#define CRYPTOCOP_IO_MAXNR             (3)
+
+typedef enum {
+	cryptocop_cipher_des = 0,
+	cryptocop_cipher_3des = 1,
+	cryptocop_cipher_aes = 2,
+	cryptocop_cipher_m2m = 3, /* mem2mem is essentially a NULL cipher with blocklength=1 */
+	cryptocop_cipher_none
+} cryptocop_cipher_type;
+
+typedef enum {
+	cryptocop_digest_sha1 = 0,
+	cryptocop_digest_md5 = 1,
+	cryptocop_digest_none
+} cryptocop_digest_type;
+
+typedef enum {
+	cryptocop_csum_le = 0,
+	cryptocop_csum_be = 1,
+	cryptocop_csum_none
+} cryptocop_csum_type;
+
+typedef enum {
+	cryptocop_cipher_mode_ecb = 0,
+	cryptocop_cipher_mode_cbc,
+	cryptocop_cipher_mode_none
+} cryptocop_cipher_mode;
+
+typedef enum {
+	cryptocop_3des_eee = 0,
+	cryptocop_3des_eed = 1,
+	cryptocop_3des_ede = 2,
+	cryptocop_3des_edd = 3,
+	cryptocop_3des_dee = 4,
+	cryptocop_3des_ded = 5,
+	cryptocop_3des_dde = 6,
+	cryptocop_3des_ddd = 7
+} cryptocop_3des_mode;
+
+/* Usermode accessible (ioctl) operations. */
+struct strcop_session_op{
+	cryptocop_session_id    ses_id;
+
+	cryptocop_cipher_type   cipher; /* AES, DES, 3DES, m2m, none */
+
+	cryptocop_cipher_mode   cmode; /* ECB, CBC, none */
+	cryptocop_3des_mode     des3_mode;
+
+	cryptocop_digest_type   digest; /* MD5, SHA1, none */
+
+	cryptocop_csum_type     csum;   /* BE, LE, none */
+
+	unsigned char           *key;
+	size_t                  keylen;
+};
+
+#define CRYPTOCOP_CSUM_LENGTH         (2)
+#define CRYPTOCOP_MAX_DIGEST_LENGTH   (20)  /* SHA-1 20, MD5 16 */
+#define CRYPTOCOP_MAX_IV_LENGTH       (16)  /* (3)DES==8, AES == 16 */
+#define CRYPTOCOP_MAX_KEY_LENGTH      (32)
+
+struct strcop_crypto_op{
+	cryptocop_session_id ses_id;
+
+	/* Indata. */
+	unsigned char            *indata;
+	size_t                   inlen; /* Total indata length. */
+
+	/* Cipher configuration. */
+	unsigned char            do_cipher:1;
+	unsigned char            decrypt:1; /* 1 == decrypt, 0 == encrypt */
+	unsigned char            cipher_explicit:1;
+	size_t                   cipher_start;
+	size_t                   cipher_len;
+	/* cipher_iv is used if do_cipher and cipher_explicit and the cipher
+	   mode is CBC.  The length is controlled by the type of cipher,
+	   e.g. DES/3DES 8 octets and AES 16 octets. */
+	unsigned char            cipher_iv[CRYPTOCOP_MAX_IV_LENGTH];
+	/* Outdata. */
+	unsigned char            *cipher_outdata;
+	size_t                   cipher_outlen;
+
+	/* digest configuration. */
+	unsigned char            do_digest:1;
+	size_t                   digest_start;
+	size_t                   digest_len;
+	/* Outdata.  The actual length is determined by the type of the digest. */
+	unsigned char            digest[CRYPTOCOP_MAX_DIGEST_LENGTH];
+
+	/* Checksum configuration. */
+	unsigned char            do_csum:1;
+	size_t                   csum_start;
+	size_t                   csum_len;
+	/* Outdata. */
+	unsigned char            csum[CRYPTOCOP_CSUM_LENGTH];
+};
+
+
+
+#ifdef __KERNEL__
+
+/********** The API to use from inside the kernel. ************/
+
+#include <asm/arch/hwregs/dma.h>
+
+typedef enum {
+	cryptocop_alg_csum = 0,
+	cryptocop_alg_mem2mem,
+	cryptocop_alg_md5,
+	cryptocop_alg_sha1,
+	cryptocop_alg_des,
+	cryptocop_alg_3des,
+	cryptocop_alg_aes,
+	cryptocop_no_alg,
+} cryptocop_algorithm;
+
+typedef u8 cryptocop_tfrm_id;
+
+
+struct cryptocop_operation;
+
+typedef void (cryptocop_callback)(struct cryptocop_operation*, void*);
+
+struct cryptocop_transform_init {
+	cryptocop_algorithm    alg;
+	/* Keydata for ciphers. */
+	unsigned char          key[CRYPTOCOP_MAX_KEY_LENGTH];
+	unsigned int           keylen;
+	cryptocop_cipher_mode  cipher_mode;
+	cryptocop_3des_mode    tdes_mode;
+	cryptocop_csum_type    csum_mode; /* cryptocop_csum_none is not allowed when alg==cryptocop_alg_csum */
+
+	cryptocop_tfrm_id tid; /* Locally unique in session; assigned by user, checked by driver. */
+	struct cryptocop_transform_init *next;
+};
+
+
+typedef enum {
+	cryptocop_source_dma = 0,
+	cryptocop_source_des,
+	cryptocop_source_3des,
+	cryptocop_source_aes,
+	cryptocop_source_md5,
+	cryptocop_source_sha1,
+	cryptocop_source_csum,
+	cryptocop_source_none,
+} cryptocop_source;
+
+
+struct cryptocop_desc_cfg {
+	cryptocop_tfrm_id tid;
+	cryptocop_source src;
+	unsigned int last:1; /* Last use of this transform in the operation.  Will push outdata when encountered. */
+	struct cryptocop_desc_cfg *next;
+};
+
+struct cryptocop_desc {
+	size_t length;
+	struct cryptocop_desc_cfg *cfg;
+	struct cryptocop_desc *next;
+};
+
+
+/* Flags for cryptocop_tfrm_cfg */
+#define CRYPTOCOP_NO_FLAG     (0x00)
+#define CRYPTOCOP_ENCRYPT     (0x01)
+#define CRYPTOCOP_DECRYPT     (0x02)
+#define CRYPTOCOP_EXPLICIT_IV (0x04)
+
+struct cryptocop_tfrm_cfg {
+	cryptocop_tfrm_id tid;
+
+	unsigned int flags; /* DECRYPT, ENCRYPT, EXPLICIT_IV */
+
+	/* CBC initialisation vector for cihers. */
+	u8 iv[CRYPTOCOP_MAX_IV_LENGTH];
+
+	/* The position in output where to write the transform output.  The order
+	   in which the driver writes the output is unspecified, hence if several
+	   transforms write on the same positions in the output the result is
+	   unspecified. */
+	size_t inject_ix;
+
+	struct cryptocop_tfrm_cfg *next;
+};
+
+
+
+struct cryptocop_dma_list_operation{
+	/* The consumer can provide DMA lists to send to the co-processor.  'use_dmalists' in
+	   struct cryptocop_operation must be set for the driver to use them.  outlist,
+	   out_data_buf, inlist and in_data_buf must all be physical addresses since they will
+	   be loaded to DMA . */
+	dma_descr_data *outlist; /* Out from memory to the co-processor. */
+	char           *out_data_buf;
+	dma_descr_data *inlist; /* In from the co-processor to memory. */
+	char           *in_data_buf;
+
+	cryptocop_3des_mode tdes_mode;
+	cryptocop_csum_type csum_mode;
+};
+
+
+struct cryptocop_tfrm_operation{
+	/* Operation configuration, if not 'use_dmalists' is set. */
+	struct cryptocop_tfrm_cfg *tfrm_cfg;
+	struct cryptocop_desc *desc;
+
+	struct iovec *indata;
+	size_t incount;
+	size_t inlen; /* Total inlength. */
+
+	struct iovec *outdata;
+	size_t outcount;
+	size_t outlen; /* Total outlength. */
+};
+
+
+struct cryptocop_operation {
+	cryptocop_callback *cb;
+	void *cb_data;
+
+	cryptocop_session_id sid;
+
+	/* The status of the operation when returned to consumer. */
+	int operation_status; /* 0, -EAGAIN */
+
+	/* Flags */
+	unsigned int use_dmalists:1;  /* Use outlist and inlist instead of the desc/tfrm_cfg configuration. */
+	unsigned int in_interrupt:1;  /* Set if inserting job from interrupt context. */
+	unsigned int fast_callback:1; /* Set if fast callback wanted, i.e. from interrupt context. */
+
+	union{
+		struct cryptocop_dma_list_operation list_op;
+		struct cryptocop_tfrm_operation tfrm_op;
+	};
+};
+
+
+int cryptocop_new_session(cryptocop_session_id *sid, struct cryptocop_transform_init *tinit, int alloc_flag);
+int cryptocop_free_session(cryptocop_session_id sid);
+
+int cryptocop_job_queue_insert_csum(struct cryptocop_operation *operation);
+
+int cryptocop_job_queue_insert_crypto(struct cryptocop_operation *operation);
+
+int cryptocop_job_queue_insert_user_job(struct cryptocop_operation *operation);
+
+#endif /* __KERNEL__ */
+
+#endif /* CRYPTOCOP_H */

include/asm-cris/arch-v32/delay.h

@@ -0,0 +1,18 @@
+#ifndef _ASM_CRIS_ARCH_DELAY_H
+#define _ASM_CRIS_ARCH_DELAY_H
+
+extern __inline__ void
+__delay(int loops)
+{
+	__asm__ __volatile__ (
+		"move.d %0, $r9\n\t"
+		"beq 2f\n\t"
+		"subq 1, $r9\n\t"
+		"1:\n\t"
+		"bne 1b\n\t"
+		"subq 1, $r9\n"
+		"2:"
+		: : "g" (loops) : "r9");
+}
+
+#endif /* _ASM_CRIS_ARCH_DELAY_H */

include/asm-cris/arch-v32/dma.h

@@ -0,0 +1,79 @@
+#ifndef _ASM_ARCH_CRIS_DMA_H
+#define _ASM_ARCH_CRIS_DMA_H
+
+/* Defines for using and allocating dma channels. */
+
+#define MAX_DMA_CHANNELS	10
+
+#define NETWORK_ETH0_TX_DMA_NBR 0	/* Ethernet 0 out. */
+#define NETWORK_ETH0 RX_DMA_NBR 1	/* Ethernet 0 in. */
+
+#define IO_PROC_DMA0_TX_DMA_NBR 2	/* IO processor DMA0 out. */
+#define IO_PROC_DMA0_RX_DMA_NBR 3	/* IO processor DMA0 in. */
+
+#define ATA_TX_DMA_NBR 2		/* ATA interface out. */
+#define ATA_RX_DMA_NBR 3		/* ATA interface in. */
+
+#define ASYNC_SER2_TX_DMA_NBR 2		/* Asynchronous serial port 2 out. */
+#define ASYNC_SER2_RX_DMA_NBR 3		/* Asynchronous serial port 2 in. */
+
+#define IO_PROC_DMA1_TX_DMA_NBR 4	/* IO processor DMA1 out. */
+#define IO_PROC_DMA1_RX_DMA_NBR 5	/* IO processor DMA1 in. */
+
+#define ASYNC_SER1_TX_DMA_NBR 4		/* Asynchronous serial port 1 out. */
+#define ASYNC_SER1_RX_DMA_NBR 5		/* Asynchronous serial port 1 in. */
+
+#define SYNC_SER0_TX_DMA_NBR 4		/* Synchronous serial port 0 out. */
+#define SYNC_SER0_RX_DMA_NBR 5		/* Synchronous serial port 0 in. */
+
+#define EXTDMA0_TX_DMA_NBR 6		/* External DMA 0 out. */
+#define EXTDMA1_RX_DMA_NBR 7		/* External DMA 1 in. */
+
+#define ASYNC_SER0_TX_DMA_NBR 6		/* Asynchronous serial port 0 out. */
+#define ASYNC_SER0_RX_DMA_NBR 7		/* Asynchronous serial port 0 in. */
+
+#define SYNC_SER1_TX_DMA_NBR 6		/* Synchronous serial port 1 out. */
+#define SYNC_SER1_RX_DMA_NBR 7		/* Synchronous serial port 1 in. */
+
+#define NETWORK_ETH1_TX_DMA_NBR 6	/* Ethernet 1 out. */
+#define NETWORK_ETH1_RX_DMA_NBR 7	/* Ethernet 1 in. */
+
+#define EXTDMA2_TX_DMA_NBR 8		/* External DMA 2 out. */
+#define EXTDMA3_RX_DMA_NBR 9		/* External DMA 3 in. */
+
+#define STRCOP_TX_DMA_NBR 8		/* Stream co-processor out. */
+#define STRCOP_RX_DMA_NBR 9		/* Stream co-processor in. */
+
+#define ASYNC_SER3_TX_DMA_NBR 8		/* Asynchronous serial port 3 out. */
+#define ASYNC_SER3_RX_DMA_NBR 9		/* Asynchronous serial port 3 in. */
+
+enum dma_owner
+{
+  dma_eth0,
+  dma_eth1,
+  dma_iop0,
+  dma_iop1,
+  dma_ser0,
+  dma_ser1,
+  dma_ser2,
+  dma_ser3,
+  dma_sser0,
+  dma_sser1,
+  dma_ata,
+  dma_strp,
+  dma_ext0,
+  dma_ext1,
+  dma_ext2,
+  dma_ext3
+};
+
+int crisv32_request_dma(unsigned int dmanr, const char * device_id,
+                        unsigned options, unsigned bandwidth, enum dma_owner owner);
+void crisv32_free_dma(unsigned int dmanr);
+
+/* Masks used by crisv32_request_dma options: */
+#define DMA_VERBOSE_ON_ERROR 1
+#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
+#define DMA_INT_MEM 4
+
+#endif /* _ASM_ARCH_CRIS_DMA_H */

include/asm-cris/arch-v32/elf.h

@@ -0,0 +1,73 @@
+#ifndef _ASM_CRIS_ELF_H
+#define _ASM_CRIS_ELF_H
+
+#define ELF_CORE_EFLAGS EF_CRIS_VARIANT_V32
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)			\
+ ((x)->e_machine == EM_CRIS			\
+  && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_V32	\
+      || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32))))
+
+/* CRISv32 ELF register definitions. */
+
+#include <asm/ptrace.h>
+
+/* Explicitly zero out registers to increase determinism. */
+#define ELF_PLAT_INIT(_r, load_addr)    do { \
+        (_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \
+        (_r)->r9 = 0;  (_r)->r8 = 0;  (_r)->r7 = 0;  (_r)->r6 = 0;  \
+        (_r)->r5 = 0;  (_r)->r4 = 0;  (_r)->r3 = 0;  (_r)->r2 = 0;  \
+        (_r)->r1 = 0;  (_r)->r0 = 0;  (_r)->mof = 0; (_r)->srp = 0; \
+        (_r)->acr = 0; \
+} while (0)
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec_binary(ex, have_pt_gnu_stack)	(!(have_pt_gnu_stack))
+
+/*
+ * This is basically a pt_regs with the additional definition
+ * of the stack pointer since it's needed in a core dump.
+ * pr_regs is a elf_gregset_t and should be filled according
+ * to the layout of user_regs_struct.
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)                   \
+        pr_reg[0] = regs->r0;                              \
+        pr_reg[1] = regs->r1;                              \
+        pr_reg[2] = regs->r2;                              \
+        pr_reg[3] = regs->r3;                              \
+        pr_reg[4] = regs->r4;                              \
+        pr_reg[5] = regs->r5;                              \
+        pr_reg[6] = regs->r6;                              \
+        pr_reg[7] = regs->r7;                              \
+        pr_reg[8] = regs->r8;                              \
+        pr_reg[9] = regs->r9;                              \
+        pr_reg[10] = regs->r10;                            \
+        pr_reg[11] = regs->r11;                            \
+        pr_reg[12] = regs->r12;                            \
+        pr_reg[13] = regs->r13;                            \
+        pr_reg[14] = rdusp();               /* SP */       \
+        pr_reg[15] = regs->acr;             /* ACR */      \
+        pr_reg[16] = 0;                     /* BZ */       \
+        pr_reg[17] = rdvr();                /* VR */       \
+        pr_reg[18] = 0;                     /* PID */      \
+        pr_reg[19] = regs->srs;             /* SRS */      \
+        pr_reg[20] = 0;                     /* WZ */       \
+        pr_reg[21] = regs->exs;             /* EXS */      \
+        pr_reg[22] = regs->eda;             /* EDA */      \
+        pr_reg[23] = regs->mof;             /* MOF */      \
+        pr_reg[24] = 0;                     /* DZ */       \
+        pr_reg[25] = 0;                     /* EBP */      \
+        pr_reg[26] = regs->erp;             /* ERP */      \
+        pr_reg[27] = regs->srp;             /* SRP */      \
+        pr_reg[28] = 0;                     /* NRP */      \
+        pr_reg[29] = regs->ccs;             /* CCS */      \
+        pr_reg[30] = rdusp();               /* USP */      \
+        pr_reg[31] = regs->spc;             /* SPC */      \
+
+#endif /* _ASM_CRIS_ELF_H */

include/asm-cris/arch-v32/hwregs/Makefile

@@ -0,0 +1,187 @@
+# $Id: Makefile,v 1.8 2004/01/07 21:16:18 johana Exp $
+# Makefile to generate or copy the latest register definitions
+# and related datastructures and helpermacros.
+# The offical place for these files is at:
+RELEASE ?= r1_alfa5
+OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/
+
+# which is updated on each new release.
+INCL_ASMFILES   =
+INCL_FILES      = ata_defs.h
+INCL_FILES     += bif_core_defs.h
+INCL_ASMFILES  += bif_core_defs_asm.h
+INCL_FILES     += bif_slave_defs.h
+#INCL_FILES     += bif_slave_ext_defs.h
+INCL_FILES     += config_defs.h
+INCL_ASMFILES  += config_defs_asm.h
+INCL_FILES     += cpu_vect.h
+#INCL_FILES     += cris_defs.h
+#INCL_FILES     += cris_supp_reg.h # In handcrafted supp_reg.h
+INCL_FILES     += dma.h
+INCL_FILES     += dma_defs.h
+INCL_FILES     += eth_defs.h
+INCL_FILES     += extmem_defs.h
+INCL_FILES     += gio_defs.h
+INCL_ASMFILES  += gio_defs_asm.h
+INCL_FILES     += intr_vect.h
+INCL_FILES     += intr_vect_defs.h
+INCL_ASMFILES  += intr_vect_defs_asm.h
+INCL_FILES     += marb_bp_defs.h
+INCL_FILES     += marb_defs.h
+INCL_ASMFILES  += mmu_defs_asm.h
+#INCL_FILES     += mmu_supp_reg.h # In handcrafted supp_reg.h
+#INCL_FILES     += par_defs.h # No useful content
+INCL_FILES     += pinmux_defs.h
+INCL_FILES     += reg_map.h
+INCL_ASMFILES  += reg_map_asm.h
+INCL_FILES     += reg_rdwr.h
+INCL_FILES     += ser_defs.h
+#INCL_FILES     += spec_reg.h # In handcrafted supp_reg.h
+INCL_FILES     += sser_defs.h
+INCL_FILES     += strcop_defs.h
+#INCL_FILES     += strcop.h # Where is this?
+INCL_FILES     += strmux_defs.h
+#INCL_FILES     += supp_reg.h # Handcrafted instead
+INCL_FILES     += timer_defs.h
+
+REGDESC =
+REGDESC += $(BASEDIR)/io/ata/rtl/ata_regs.r
+REGDESC += $(BASEDIR)/io/bif/rtl/bif_core_regs.r
+REGDESC += $(BASEDIR)/io/bif/rtl/bif_slave_regs.r
+#REGDESC += $(BASEDIR)/io/bif/sw/bif_slave_ext_regs.r
+REGDESC += $(DESIGNDIR)/top/rtl/config_regs.r
+REGDESC += $(BASEDIR)/mod/dma_common/rtl/dma_regdes.r
+REGDESC += $(BASEDIR)/io/eth/rtl/eth_regs.r
+REGDESC += $(BASEDIR)/io/bif/mod/extmem/extmem_regs.r
+REGDESC += $(DESIGNDIR)/gio/rtl/gio_regs.r
+REGDESC += $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r
+REGDESC += $(BASEDIR)/core/memarb/rtl/guinness/marb_top.r
+REGDESC += $(BASEDIR)/core/cpu/mmu/doc/mmu_regs.r
+#REGDESC += $(BASEDIR)/io/par_port/rtl/par_regs.r
+REGDESC += $(BASEDIR)/io/pinmux/rtl/guinness/pinmux_regs.r
+REGDESC += $(BASEDIR)/io/ser/rtl/ser_regs.r
+REGDESC += $(BASEDIR)/core/strcop/rtl/strcop_regs.r
+REGDESC += $(BASEDIR)/io/strmux/rtl/guinness/strmux_regs.r
+REGDESC += $(BASEDIR)/io/timer/rtl/timer_regs.r
+#REGDESC += $(BASEDIR)/io/usb/usb1_1/rtl/usb_regs.r
+
+
+BASEDIR = /n/asic/design
+DESIGNDIR = /n/asic/projects/guinness/design
+RDES2C = /n/asic/bin/rdes2c
+RDES2C = /n/asic/design/tools/rdesc/rdes2c
+RDES2INTR = /n/asic/design/tools/rdesc/rdes2intr
+RDES2TXT = /n/asic/design/tools/rdesc/rdes2txt
+
+## all    - Just print help - you probably want to do 'make gen'
+all: help
+
+# Disable implicit rule that may generate deleted files from RCS/ directory.
+%.r:
+
+%.h:
+
+## help   - This help
+help:
+	@grep '^## ' Makefile
+
+## gen    - Generate include files
+gen: $(INCL_FILES) $(INCL_ASMFILES)
+
+ata_defs.h: $(BASEDIR)/io/ata/rtl/ata_regs.r
+	$(RDES2C) $<
+config_defs.h: $(DESIGNDIR)/top/rtl/config_regs.r
+	$(RDES2C) $<
+config_defs_asm.h: $(DESIGNDIR)/top/rtl/config_regs.r
+	$(RDES2C) -asm $<
+# Can't generate cpu_vect.h yet
+#cpu_vect.h: $(DESIGNDIR)/top/rtl/cpu_vect.r # ????
+#	$(RDES2INTR) $<
+cpu_vect.h: $(OFFICIAL_INCDIR)cpu_vect.h
+	cat $< | sed -e 's/\$$Id\:/id\:/g' >$@
+dma_defs.h: $(BASEDIR)/core/dma/rtl/common/dma_regdes.r
+	$(RDES2C) $<
+$(BASEDIR)/core/dma/sw/dma.h:
+dma.h: $(BASEDIR)/core/dma/sw/dma.h
+	cat $< | sed -e 's/\$$Id\:/id\:/g' >$@
+eth_defs.h: $(BASEDIR)/io/eth/rtl/eth_regs.r
+	$(RDES2C) $<
+extmem_defs.h: $(BASEDIR)/io/bif/mod/extmem/extmem_regs.r
+	$(RDES2C) $<
+gio_defs.h: $(DESIGNDIR)/gio/rtl/gio_regs.r
+	$(RDES2C) $<
+intr_vect_defs.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r
+	$(RDES2C) $<
+intr_vect_defs_asm.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r
+	$(RDES2C) -asm $<
+# Can't generate intr_vect.h yet
+#intr_vect.h: $(BASEDIR)/core/cpu/intr_vect/rtl/guinness/ivmask.config.r
+#	$(RDES2INTR) $<
+intr_vect.h: $(OFFICIAL_INCDIR)intr_vect.h
+	cat $< | sed -e 's/\$$Id\:/id\:/g' >$@
+mmu_defs_asm.h: $(BASEDIR)/core/cpu/mmu/doc/mmu_regs.r
+	$(RDES2C) -asm $<
+par_defs.h: $(BASEDIR)/io/par_port/rtl/par_regs.r
+	$(RDES2C) $<
+
+# From /n/asic/projects/guinness/design/
+reg_map.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap
+	$(RDES2C) -base 0xb0000000 $^
+reg_map_asm.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap
+	$(RDES2C) -base 0xb0000000 -asm -outfile $@ $^
+
+reg_rdwr.h: $(DESIGNDIR)/top/sw/include/reg_rdwr.h
+	cat $< | sed -e 's/\$$Id\:/id\:/g' >$@
+
+ser_defs.h: $(BASEDIR)/io/ser/rtl/ser_regs.r
+	$(RDES2C) $<
+strcop_defs.h: $(BASEDIR)/core/strcop/rtl/strcop_regs.r
+	$(RDES2C) $<
+strcop.h: $(BASEDIR)/core/strcop/rtl/strcop.h
+	cat $< | sed -e 's/\$$Id\:/id\:/g' >$@
+strmux_defs.h: $(BASEDIR)/io/strmux/rtl/guinness/strmux_regs.r
+	$(RDES2C) $<
+timer_defs.h: $(BASEDIR)/io/timer/rtl/timer_regs.r
+	$(RDES2C) $<
+usb_defs.h: $(BASEDIR)/io/usb/usb1_1/rtl/usb_regs.r
+	$(RDES2C) $<
+
+## copy   - Copy files from official location
+copy:
+	@for HFILE in $(INCL_FILES); do \
+		echo "  $$HFILE"; \
+		cat $(OFFICIAL_INCDIR)$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \
+	done
+	@for HFILE in $(INCL_ASMFILES); do \
+		echo "  $$HFILE"; \
+		cat $(OFFICIAL_INCDIR)asm/$$HFILE | sed -e 's/\$$Id\:/id\:/g' > $$HFILE; \
+	done
+## ls_official - List official location
+ls_official:
+	(cd $(OFFICIAL_INCDIR); ls -l *.h )
+
+## diff_official - Diff current directory with official location
+diff_official:
+	diff . $(OFFICIAL_INCDIR)
+
+## doc    - Generate .axw files from register description.
+doc: $(REGDESC)
+	for RDES in $^; do \
+		$(RDES2TXT) $$RDES; \
+	done
+
+.PHONY: axw
+## %.axw  - Generate the specified .axw file (doesn't work for all files
+##          due to inconsistent naming ir .r files.
+%.axw: axw
+	@for RDES in $(REGDESC); do \
+		if echo "$$RDES" | grep $* ; then \
+		  $(RDES2TXT) $$RDES; \
+		fi \
+	done
+
+.PHONY: clean
+## clean  - Remove .h files and .axw files.
+clean:
+	rm -rf $(INCL_FILES) *.axw
+

include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h

@@ -0,0 +1,222 @@
+#ifndef __ata_defs_asm_h
+#define __ata_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/ata/rtl/ata_regs.r
+ *     id:           ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp
+ *     last modfied: Mon Apr 11 16:06:25 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ata_defs_asm.h ../../inst/ata/rtl/ata_regs.r
+ *      id: $Id: ata_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_ctrl0, scope ata, type rw */
+#define reg_ata_rw_ctrl0___pio_hold___lsb 0
+#define reg_ata_rw_ctrl0___pio_hold___width 6
+#define reg_ata_rw_ctrl0___pio_strb___lsb 6
+#define reg_ata_rw_ctrl0___pio_strb___width 6
+#define reg_ata_rw_ctrl0___pio_setup___lsb 12
+#define reg_ata_rw_ctrl0___pio_setup___width 6
+#define reg_ata_rw_ctrl0___dma_hold___lsb 18
+#define reg_ata_rw_ctrl0___dma_hold___width 6
+#define reg_ata_rw_ctrl0___dma_strb___lsb 24
+#define reg_ata_rw_ctrl0___dma_strb___width 6
+#define reg_ata_rw_ctrl0___rst___lsb 30
+#define reg_ata_rw_ctrl0___rst___width 1
+#define reg_ata_rw_ctrl0___rst___bit 30
+#define reg_ata_rw_ctrl0___en___lsb 31
+#define reg_ata_rw_ctrl0___en___width 1
+#define reg_ata_rw_ctrl0___en___bit 31
+#define reg_ata_rw_ctrl0_offset 12
+
+/* Register rw_ctrl1, scope ata, type rw */
+#define reg_ata_rw_ctrl1___udma_tcyc___lsb 0
+#define reg_ata_rw_ctrl1___udma_tcyc___width 4
+#define reg_ata_rw_ctrl1___udma_tdvs___lsb 4
+#define reg_ata_rw_ctrl1___udma_tdvs___width 4
+#define reg_ata_rw_ctrl1_offset 16
+
+/* Register rw_ctrl2, scope ata, type rw */
+#define reg_ata_rw_ctrl2___data___lsb 0
+#define reg_ata_rw_ctrl2___data___width 16
+#define reg_ata_rw_ctrl2___dma_size___lsb 19
+#define reg_ata_rw_ctrl2___dma_size___width 1
+#define reg_ata_rw_ctrl2___dma_size___bit 19
+#define reg_ata_rw_ctrl2___multi___lsb 20
+#define reg_ata_rw_ctrl2___multi___width 1
+#define reg_ata_rw_ctrl2___multi___bit 20
+#define reg_ata_rw_ctrl2___hsh___lsb 21
+#define reg_ata_rw_ctrl2___hsh___width 2
+#define reg_ata_rw_ctrl2___trf_mode___lsb 23
+#define reg_ata_rw_ctrl2___trf_mode___width 1
+#define reg_ata_rw_ctrl2___trf_mode___bit 23
+#define reg_ata_rw_ctrl2___rw___lsb 24
+#define reg_ata_rw_ctrl2___rw___width 1
+#define reg_ata_rw_ctrl2___rw___bit 24
+#define reg_ata_rw_ctrl2___addr___lsb 25
+#define reg_ata_rw_ctrl2___addr___width 3
+#define reg_ata_rw_ctrl2___cs0___lsb 28
+#define reg_ata_rw_ctrl2___cs0___width 1
+#define reg_ata_rw_ctrl2___cs0___bit 28
+#define reg_ata_rw_ctrl2___cs1___lsb 29
+#define reg_ata_rw_ctrl2___cs1___width 1
+#define reg_ata_rw_ctrl2___cs1___bit 29
+#define reg_ata_rw_ctrl2___sel___lsb 30
+#define reg_ata_rw_ctrl2___sel___width 2
+#define reg_ata_rw_ctrl2_offset 0
+
+/* Register rs_stat_data, scope ata, type rs */
+#define reg_ata_rs_stat_data___data___lsb 0
+#define reg_ata_rs_stat_data___data___width 16
+#define reg_ata_rs_stat_data___dav___lsb 16
+#define reg_ata_rs_stat_data___dav___width 1
+#define reg_ata_rs_stat_data___dav___bit 16
+#define reg_ata_rs_stat_data___busy___lsb 17
+#define reg_ata_rs_stat_data___busy___width 1
+#define reg_ata_rs_stat_data___busy___bit 17
+#define reg_ata_rs_stat_data_offset 4
+
+/* Register r_stat_data, scope ata, type r */
+#define reg_ata_r_stat_data___data___lsb 0
+#define reg_ata_r_stat_data___data___width 16
+#define reg_ata_r_stat_data___dav___lsb 16
+#define reg_ata_r_stat_data___dav___width 1
+#define reg_ata_r_stat_data___dav___bit 16
+#define reg_ata_r_stat_data___busy___lsb 17
+#define reg_ata_r_stat_data___busy___width 1
+#define reg_ata_r_stat_data___busy___bit 17
+#define reg_ata_r_stat_data_offset 8
+
+/* Register rw_trf_cnt, scope ata, type rw */
+#define reg_ata_rw_trf_cnt___cnt___lsb 0
+#define reg_ata_rw_trf_cnt___cnt___width 17
+#define reg_ata_rw_trf_cnt_offset 20
+
+/* Register r_stat_misc, scope ata, type r */
+#define reg_ata_r_stat_misc___crc___lsb 0
+#define reg_ata_r_stat_misc___crc___width 16
+#define reg_ata_r_stat_misc_offset 24
+
+/* Register rw_intr_mask, scope ata, type rw */
+#define reg_ata_rw_intr_mask___bus0___lsb 0
+#define reg_ata_rw_intr_mask___bus0___width 1
+#define reg_ata_rw_intr_mask___bus0___bit 0
+#define reg_ata_rw_intr_mask___bus1___lsb 1
+#define reg_ata_rw_intr_mask___bus1___width 1
+#define reg_ata_rw_intr_mask___bus1___bit 1
+#define reg_ata_rw_intr_mask___bus2___lsb 2
+#define reg_ata_rw_intr_mask___bus2___width 1
+#define reg_ata_rw_intr_mask___bus2___bit 2
+#define reg_ata_rw_intr_mask___bus3___lsb 3
+#define reg_ata_rw_intr_mask___bus3___width 1
+#define reg_ata_rw_intr_mask___bus3___bit 3
+#define reg_ata_rw_intr_mask_offset 28
+
+/* Register rw_ack_intr, scope ata, type rw */
+#define reg_ata_rw_ack_intr___bus0___lsb 0
+#define reg_ata_rw_ack_intr___bus0___width 1
+#define reg_ata_rw_ack_intr___bus0___bit 0
+#define reg_ata_rw_ack_intr___bus1___lsb 1
+#define reg_ata_rw_ack_intr___bus1___width 1
+#define reg_ata_rw_ack_intr___bus1___bit 1
+#define reg_ata_rw_ack_intr___bus2___lsb 2
+#define reg_ata_rw_ack_intr___bus2___width 1
+#define reg_ata_rw_ack_intr___bus2___bit 2
+#define reg_ata_rw_ack_intr___bus3___lsb 3
+#define reg_ata_rw_ack_intr___bus3___width 1
+#define reg_ata_rw_ack_intr___bus3___bit 3
+#define reg_ata_rw_ack_intr_offset 32
+
+/* Register r_intr, scope ata, type r */
+#define reg_ata_r_intr___bus0___lsb 0
+#define reg_ata_r_intr___bus0___width 1
+#define reg_ata_r_intr___bus0___bit 0
+#define reg_ata_r_intr___bus1___lsb 1
+#define reg_ata_r_intr___bus1___width 1
+#define reg_ata_r_intr___bus1___bit 1
+#define reg_ata_r_intr___bus2___lsb 2
+#define reg_ata_r_intr___bus2___width 1
+#define reg_ata_r_intr___bus2___bit 2
+#define reg_ata_r_intr___bus3___lsb 3
+#define reg_ata_r_intr___bus3___width 1
+#define reg_ata_r_intr___bus3___bit 3
+#define reg_ata_r_intr_offset 36
+
+/* Register r_masked_intr, scope ata, type r */
+#define reg_ata_r_masked_intr___bus0___lsb 0
+#define reg_ata_r_masked_intr___bus0___width 1
+#define reg_ata_r_masked_intr___bus0___bit 0
+#define reg_ata_r_masked_intr___bus1___lsb 1
+#define reg_ata_r_masked_intr___bus1___width 1
+#define reg_ata_r_masked_intr___bus1___bit 1
+#define reg_ata_r_masked_intr___bus2___lsb 2
+#define reg_ata_r_masked_intr___bus2___width 1
+#define reg_ata_r_masked_intr___bus2___bit 2
+#define reg_ata_r_masked_intr___bus3___lsb 3
+#define reg_ata_r_masked_intr___bus3___width 1
+#define reg_ata_r_masked_intr___bus3___bit 3
+#define reg_ata_r_masked_intr_offset 40
+
+
+/* Constants */
+#define regk_ata_active                           0x00000001
+#define regk_ata_byte                             0x00000001
+#define regk_ata_data                             0x00000001
+#define regk_ata_dma                              0x00000001
+#define regk_ata_inactive                         0x00000000
+#define regk_ata_no                               0x00000000
+#define regk_ata_nodata                           0x00000000
+#define regk_ata_pio                              0x00000000
+#define regk_ata_rd                               0x00000001
+#define regk_ata_reg                              0x00000000
+#define regk_ata_rw_ctrl0_default                 0x00000000
+#define regk_ata_rw_ctrl2_default                 0x00000000
+#define regk_ata_rw_intr_mask_default             0x00000000
+#define regk_ata_udma                             0x00000002
+#define regk_ata_word                             0x00000000
+#define regk_ata_wr                               0x00000000
+#define regk_ata_yes                              0x00000001
+#endif /* __ata_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h

@@ -0,0 +1,319 @@
+#ifndef __bif_core_defs_asm_h
+#define __bif_core_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/bif/rtl/bif_core_regs.r
+ *     id:           bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp
+ *     last modfied: Mon Apr 11 16:06:33 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r
+ *      id: $Id: bif_core_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_grp1_cfg, scope bif_core, type rw */
+#define reg_bif_core_rw_grp1_cfg___lw___lsb 0
+#define reg_bif_core_rw_grp1_cfg___lw___width 6
+#define reg_bif_core_rw_grp1_cfg___ew___lsb 6
+#define reg_bif_core_rw_grp1_cfg___ew___width 3
+#define reg_bif_core_rw_grp1_cfg___zw___lsb 9
+#define reg_bif_core_rw_grp1_cfg___zw___width 3
+#define reg_bif_core_rw_grp1_cfg___aw___lsb 12
+#define reg_bif_core_rw_grp1_cfg___aw___width 2
+#define reg_bif_core_rw_grp1_cfg___dw___lsb 14
+#define reg_bif_core_rw_grp1_cfg___dw___width 2
+#define reg_bif_core_rw_grp1_cfg___ewb___lsb 16
+#define reg_bif_core_rw_grp1_cfg___ewb___width 2
+#define reg_bif_core_rw_grp1_cfg___bw___lsb 18
+#define reg_bif_core_rw_grp1_cfg___bw___width 1
+#define reg_bif_core_rw_grp1_cfg___bw___bit 18
+#define reg_bif_core_rw_grp1_cfg___wr_extend___lsb 19
+#define reg_bif_core_rw_grp1_cfg___wr_extend___width 1
+#define reg_bif_core_rw_grp1_cfg___wr_extend___bit 19
+#define reg_bif_core_rw_grp1_cfg___erc_en___lsb 20
+#define reg_bif_core_rw_grp1_cfg___erc_en___width 1
+#define reg_bif_core_rw_grp1_cfg___erc_en___bit 20
+#define reg_bif_core_rw_grp1_cfg___mode___lsb 21
+#define reg_bif_core_rw_grp1_cfg___mode___width 1
+#define reg_bif_core_rw_grp1_cfg___mode___bit 21
+#define reg_bif_core_rw_grp1_cfg_offset 0
+
+/* Register rw_grp2_cfg, scope bif_core, type rw */
+#define reg_bif_core_rw_grp2_cfg___lw___lsb 0
+#define reg_bif_core_rw_grp2_cfg___lw___width 6
+#define reg_bif_core_rw_grp2_cfg___ew___lsb 6
+#define reg_bif_core_rw_grp2_cfg___ew___width 3
+#define reg_bif_core_rw_grp2_cfg___zw___lsb 9
+#define reg_bif_core_rw_grp2_cfg___zw___width 3
+#define reg_bif_core_rw_grp2_cfg___aw___lsb 12
+#define reg_bif_core_rw_grp2_cfg___aw___width 2
+#define reg_bif_core_rw_grp2_cfg___dw___lsb 14
+#define reg_bif_core_rw_grp2_cfg___dw___width 2
+#define reg_bif_core_rw_grp2_cfg___ewb___lsb 16
+#define reg_bif_core_rw_grp2_cfg___ewb___width 2
+#define reg_bif_core_rw_grp2_cfg___bw___lsb 18
+#define reg_bif_core_rw_grp2_cfg___bw___width 1
+#define reg_bif_core_rw_grp2_cfg___bw___bit 18
+#define reg_bif_core_rw_grp2_cfg___wr_extend___lsb 19
+#define reg_bif_core_rw_grp2_cfg___wr_extend___width 1
+#define reg_bif_core_rw_grp2_cfg___wr_extend___bit 19
+#define reg_bif_core_rw_grp2_cfg___erc_en___lsb 20
+#define reg_bif_core_rw_grp2_cfg___erc_en___width 1
+#define reg_bif_core_rw_grp2_cfg___erc_en___bit 20
+#define reg_bif_core_rw_grp2_cfg___mode___lsb 21
+#define reg_bif_core_rw_grp2_cfg___mode___width 1
+#define reg_bif_core_rw_grp2_cfg___mode___bit 21
+#define reg_bif_core_rw_grp2_cfg_offset 4
+
+/* Register rw_grp3_cfg, scope bif_core, type rw */
+#define reg_bif_core_rw_grp3_cfg___lw___lsb 0
+#define reg_bif_core_rw_grp3_cfg___lw___width 6
+#define reg_bif_core_rw_grp3_cfg___ew___lsb 6
+#define reg_bif_core_rw_grp3_cfg___ew___width 3
+#define reg_bif_core_rw_grp3_cfg___zw___lsb 9
+#define reg_bif_core_rw_grp3_cfg___zw___width 3
+#define reg_bif_core_rw_grp3_cfg___aw___lsb 12
+#define reg_bif_core_rw_grp3_cfg___aw___width 2
+#define reg_bif_core_rw_grp3_cfg___dw___lsb 14
+#define reg_bif_core_rw_grp3_cfg___dw___width 2
+#define reg_bif_core_rw_grp3_cfg___ewb___lsb 16
+#define reg_bif_core_rw_grp3_cfg___ewb___width 2
+#define reg_bif_core_rw_grp3_cfg___bw___lsb 18
+#define reg_bif_core_rw_grp3_cfg___bw___width 1
+#define reg_bif_core_rw_grp3_cfg___bw___bit 18
+#define reg_bif_core_rw_grp3_cfg___wr_extend___lsb 19
+#define reg_bif_core_rw_grp3_cfg___wr_extend___width 1
+#define reg_bif_core_rw_grp3_cfg___wr_extend___bit 19
+#define reg_bif_core_rw_grp3_cfg___erc_en___lsb 20
+#define reg_bif_core_rw_grp3_cfg___erc_en___width 1
+#define reg_bif_core_rw_grp3_cfg___erc_en___bit 20
+#define reg_bif_core_rw_grp3_cfg___mode___lsb 21
+#define reg_bif_core_rw_grp3_cfg___mode___width 1
+#define reg_bif_core_rw_grp3_cfg___mode___bit 21
+#define reg_bif_core_rw_grp3_cfg___gated_csp0___lsb 24
+#define reg_bif_core_rw_grp3_cfg___gated_csp0___width 2
+#define reg_bif_core_rw_grp3_cfg___gated_csp1___lsb 26
+#define reg_bif_core_rw_grp3_cfg___gated_csp1___width 2
+#define reg_bif_core_rw_grp3_cfg___gated_csp2___lsb 28
+#define reg_bif_core_rw_grp3_cfg___gated_csp2___width 2
+#define reg_bif_core_rw_grp3_cfg___gated_csp3___lsb 30
+#define reg_bif_core_rw_grp3_cfg___gated_csp3___width 2
+#define reg_bif_core_rw_grp3_cfg_offset 8
+
+/* Register rw_grp4_cfg, scope bif_core, type rw */
+#define reg_bif_core_rw_grp4_cfg___lw___lsb 0
+#define reg_bif_core_rw_grp4_cfg___lw___width 6
+#define reg_bif_core_rw_grp4_cfg___ew___lsb 6
+#define reg_bif_core_rw_grp4_cfg___ew___width 3
+#define reg_bif_core_rw_grp4_cfg___zw___lsb 9
+#define reg_bif_core_rw_grp4_cfg___zw___width 3
+#define reg_bif_core_rw_grp4_cfg___aw___lsb 12
+#define reg_bif_core_rw_grp4_cfg___aw___width 2
+#define reg_bif_core_rw_grp4_cfg___dw___lsb 14
+#define reg_bif_core_rw_grp4_cfg___dw___width 2
+#define reg_bif_core_rw_grp4_cfg___ewb___lsb 16
+#define reg_bif_core_rw_grp4_cfg___ewb___width 2
+#define reg_bif_core_rw_grp4_cfg___bw___lsb 18
+#define reg_bif_core_rw_grp4_cfg___bw___width 1
+#define reg_bif_core_rw_grp4_cfg___bw___bit 18
+#define reg_bif_core_rw_grp4_cfg___wr_extend___lsb 19
+#define reg_bif_core_rw_grp4_cfg___wr_extend___width 1
+#define reg_bif_core_rw_grp4_cfg___wr_extend___bit 19
+#define reg_bif_core_rw_grp4_cfg___erc_en___lsb 20
+#define reg_bif_core_rw_grp4_cfg___erc_en___width 1
+#define reg_bif_core_rw_grp4_cfg___erc_en___bit 20
+#define reg_bif_core_rw_grp4_cfg___mode___lsb 21
+#define reg_bif_core_rw_grp4_cfg___mode___width 1
+#define reg_bif_core_rw_grp4_cfg___mode___bit 21
+#define reg_bif_core_rw_grp4_cfg___gated_csp4___lsb 26
+#define reg_bif_core_rw_grp4_cfg___gated_csp4___width 2
+#define reg_bif_core_rw_grp4_cfg___gated_csp5___lsb 28
+#define reg_bif_core_rw_grp4_cfg___gated_csp5___width 2
+#define reg_bif_core_rw_grp4_cfg___gated_csp6___lsb 30
+#define reg_bif_core_rw_grp4_cfg___gated_csp6___width 2
+#define reg_bif_core_rw_grp4_cfg_offset 12
+
+/* Register rw_sdram_cfg_grp0, scope bif_core, type rw */
+#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___lsb 0
+#define reg_bif_core_rw_sdram_cfg_grp0___bank_sel___width 5
+#define reg_bif_core_rw_sdram_cfg_grp0___ca___lsb 5
+#define reg_bif_core_rw_sdram_cfg_grp0___ca___width 3
+#define reg_bif_core_rw_sdram_cfg_grp0___type___lsb 8
+#define reg_bif_core_rw_sdram_cfg_grp0___type___width 1
+#define reg_bif_core_rw_sdram_cfg_grp0___type___bit 8
+#define reg_bif_core_rw_sdram_cfg_grp0___bw___lsb 9
+#define reg_bif_core_rw_sdram_cfg_grp0___bw___width 1
+#define reg_bif_core_rw_sdram_cfg_grp0___bw___bit 9
+#define reg_bif_core_rw_sdram_cfg_grp0___sh___lsb 10
+#define reg_bif_core_rw_sdram_cfg_grp0___sh___width 3
+#define reg_bif_core_rw_sdram_cfg_grp0___wmm___lsb 13
+#define reg_bif_core_rw_sdram_cfg_grp0___wmm___width 1
+#define reg_bif_core_rw_sdram_cfg_grp0___wmm___bit 13
+#define reg_bif_core_rw_sdram_cfg_grp0___sh16___lsb 14
+#define reg_bif_core_rw_sdram_cfg_grp0___sh16___width 1
+#define reg_bif_core_rw_sdram_cfg_grp0___sh16___bit 14
+#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___lsb 15
+#define reg_bif_core_rw_sdram_cfg_grp0___grp_sel___width 5
+#define reg_bif_core_rw_sdram_cfg_grp0_offset 16
+
+/* Register rw_sdram_cfg_grp1, scope bif_core, type rw */
+#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___lsb 0
+#define reg_bif_core_rw_sdram_cfg_grp1___bank_sel___width 5
+#define reg_bif_core_rw_sdram_cfg_grp1___ca___lsb 5
+#define reg_bif_core_rw_sdram_cfg_grp1___ca___width 3
+#define reg_bif_core_rw_sdram_cfg_grp1___type___lsb 8
+#define reg_bif_core_rw_sdram_cfg_grp1___type___width 1
+#define reg_bif_core_rw_sdram_cfg_grp1___type___bit 8
+#define reg_bif_core_rw_sdram_cfg_grp1___bw___lsb 9
+#define reg_bif_core_rw_sdram_cfg_grp1___bw___width 1
+#define reg_bif_core_rw_sdram_cfg_grp1___bw___bit 9
+#define reg_bif_core_rw_sdram_cfg_grp1___sh___lsb 10
+#define reg_bif_core_rw_sdram_cfg_grp1___sh___width 3
+#define reg_bif_core_rw_sdram_cfg_grp1___wmm___lsb 13
+#define reg_bif_core_rw_sdram_cfg_grp1___wmm___width 1
+#define reg_bif_core_rw_sdram_cfg_grp1___wmm___bit 13
+#define reg_bif_core_rw_sdram_cfg_grp1___sh16___lsb 14
+#define reg_bif_core_rw_sdram_cfg_grp1___sh16___width 1
+#define reg_bif_core_rw_sdram_cfg_grp1___sh16___bit 14
+#define reg_bif_core_rw_sdram_cfg_grp1_offset 20
+
+/* Register rw_sdram_timing, scope bif_core, type rw */
+#define reg_bif_core_rw_sdram_timing___cl___lsb 0
+#define reg_bif_core_rw_sdram_timing___cl___width 3
+#define reg_bif_core_rw_sdram_timing___rcd___lsb 3
+#define reg_bif_core_rw_sdram_timing___rcd___width 3
+#define reg_bif_core_rw_sdram_timing___rp___lsb 6
+#define reg_bif_core_rw_sdram_timing___rp___width 3
+#define reg_bif_core_rw_sdram_timing___rc___lsb 9
+#define reg_bif_core_rw_sdram_timing___rc___width 2
+#define reg_bif_core_rw_sdram_timing___dpl___lsb 11
+#define reg_bif_core_rw_sdram_timing___dpl___width 2
+#define reg_bif_core_rw_sdram_timing___pde___lsb 13
+#define reg_bif_core_rw_sdram_timing___pde___width 1
+#define reg_bif_core_rw_sdram_timing___pde___bit 13
+#define reg_bif_core_rw_sdram_timing___ref___lsb 14
+#define reg_bif_core_rw_sdram_timing___ref___width 2
+#define reg_bif_core_rw_sdram_timing___cpd___lsb 16
+#define reg_bif_core_rw_sdram_timing___cpd___width 1
+#define reg_bif_core_rw_sdram_timing___cpd___bit 16
+#define reg_bif_core_rw_sdram_timing___sdcke___lsb 17
+#define reg_bif_core_rw_sdram_timing___sdcke___width 1
+#define reg_bif_core_rw_sdram_timing___sdcke___bit 17
+#define reg_bif_core_rw_sdram_timing___sdclk___lsb 18
+#define reg_bif_core_rw_sdram_timing___sdclk___width 1
+#define reg_bif_core_rw_sdram_timing___sdclk___bit 18
+#define reg_bif_core_rw_sdram_timing_offset 24
+
+/* Register rw_sdram_cmd, scope bif_core, type rw */
+#define reg_bif_core_rw_sdram_cmd___cmd___lsb 0
+#define reg_bif_core_rw_sdram_cmd___cmd___width 3
+#define reg_bif_core_rw_sdram_cmd___mrs_data___lsb 3
+#define reg_bif_core_rw_sdram_cmd___mrs_data___width 15
+#define reg_bif_core_rw_sdram_cmd_offset 28
+
+/* Register rs_sdram_ref_stat, scope bif_core, type rs */
+#define reg_bif_core_rs_sdram_ref_stat___ok___lsb 0
+#define reg_bif_core_rs_sdram_ref_stat___ok___width 1
+#define reg_bif_core_rs_sdram_ref_stat___ok___bit 0
+#define reg_bif_core_rs_sdram_ref_stat_offset 32
+
+/* Register r_sdram_ref_stat, scope bif_core, type r */
+#define reg_bif_core_r_sdram_ref_stat___ok___lsb 0
+#define reg_bif_core_r_sdram_ref_stat___ok___width 1
+#define reg_bif_core_r_sdram_ref_stat___ok___bit 0
+#define reg_bif_core_r_sdram_ref_stat_offset 36
+
+
+/* Constants */
+#define regk_bif_core_bank2                       0x00000000
+#define regk_bif_core_bank4                       0x00000001
+#define regk_bif_core_bit10                       0x0000000a
+#define regk_bif_core_bit11                       0x0000000b
+#define regk_bif_core_bit12                       0x0000000c
+#define regk_bif_core_bit13                       0x0000000d
+#define regk_bif_core_bit14                       0x0000000e
+#define regk_bif_core_bit15                       0x0000000f
+#define regk_bif_core_bit16                       0x00000010
+#define regk_bif_core_bit17                       0x00000011
+#define regk_bif_core_bit18                       0x00000012
+#define regk_bif_core_bit19                       0x00000013
+#define regk_bif_core_bit20                       0x00000014
+#define regk_bif_core_bit21                       0x00000015
+#define regk_bif_core_bit22                       0x00000016
+#define regk_bif_core_bit23                       0x00000017
+#define regk_bif_core_bit24                       0x00000018
+#define regk_bif_core_bit25                       0x00000019
+#define regk_bif_core_bit26                       0x0000001a
+#define regk_bif_core_bit27                       0x0000001b
+#define regk_bif_core_bit28                       0x0000001c
+#define regk_bif_core_bit29                       0x0000001d
+#define regk_bif_core_bit9                        0x00000009
+#define regk_bif_core_bw16                        0x00000001
+#define regk_bif_core_bw32                        0x00000000
+#define regk_bif_core_bwe                         0x00000000
+#define regk_bif_core_cwe                         0x00000001
+#define regk_bif_core_e15us                       0x00000001
+#define regk_bif_core_e7800ns                     0x00000002
+#define regk_bif_core_grp0                        0x00000000
+#define regk_bif_core_grp1                        0x00000001
+#define regk_bif_core_mrs                         0x00000003
+#define regk_bif_core_no                          0x00000000
+#define regk_bif_core_none                        0x00000000
+#define regk_bif_core_nop                         0x00000000
+#define regk_bif_core_off                         0x00000000
+#define regk_bif_core_pre                         0x00000002
+#define regk_bif_core_r_sdram_ref_stat_default    0x00000001
+#define regk_bif_core_rd                          0x00000002
+#define regk_bif_core_ref                         0x00000001
+#define regk_bif_core_rs_sdram_ref_stat_default   0x00000001
+#define regk_bif_core_rw_grp1_cfg_default         0x000006cf
+#define regk_bif_core_rw_grp2_cfg_default         0x000006cf
+#define regk_bif_core_rw_grp3_cfg_default         0x000006cf
+#define regk_bif_core_rw_grp4_cfg_default         0x000006cf
+#define regk_bif_core_rw_sdram_cfg_grp1_default   0x00000000
+#define regk_bif_core_slf                         0x00000004
+#define regk_bif_core_wr                          0x00000001
+#define regk_bif_core_yes                         0x00000001
+#endif /* __bif_core_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h

@@ -0,0 +1,495 @@
+#ifndef __bif_dma_defs_asm_h
+#define __bif_dma_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/bif/rtl/bif_dma_regs.r
+ *     id:           bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp
+ *     last modfied: Mon Apr 11 16:06:33 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_dma_defs_asm.h ../../inst/bif/rtl/bif_dma_regs.r
+ *      id: $Id: bif_dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_ch0_ctrl, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch0_ctrl___bw___lsb 0
+#define reg_bif_dma_rw_ch0_ctrl___bw___width 2
+#define reg_bif_dma_rw_ch0_ctrl___burst_len___lsb 2
+#define reg_bif_dma_rw_ch0_ctrl___burst_len___width 1
+#define reg_bif_dma_rw_ch0_ctrl___burst_len___bit 2
+#define reg_bif_dma_rw_ch0_ctrl___cont___lsb 3
+#define reg_bif_dma_rw_ch0_ctrl___cont___width 1
+#define reg_bif_dma_rw_ch0_ctrl___cont___bit 3
+#define reg_bif_dma_rw_ch0_ctrl___end_pad___lsb 4
+#define reg_bif_dma_rw_ch0_ctrl___end_pad___width 1
+#define reg_bif_dma_rw_ch0_ctrl___end_pad___bit 4
+#define reg_bif_dma_rw_ch0_ctrl___cnt___lsb 5
+#define reg_bif_dma_rw_ch0_ctrl___cnt___width 1
+#define reg_bif_dma_rw_ch0_ctrl___cnt___bit 5
+#define reg_bif_dma_rw_ch0_ctrl___dreq_pin___lsb 6
+#define reg_bif_dma_rw_ch0_ctrl___dreq_pin___width 3
+#define reg_bif_dma_rw_ch0_ctrl___dreq_mode___lsb 9
+#define reg_bif_dma_rw_ch0_ctrl___dreq_mode___width 2
+#define reg_bif_dma_rw_ch0_ctrl___tc_in_pin___lsb 11
+#define reg_bif_dma_rw_ch0_ctrl___tc_in_pin___width 3
+#define reg_bif_dma_rw_ch0_ctrl___tc_in_mode___lsb 14
+#define reg_bif_dma_rw_ch0_ctrl___tc_in_mode___width 2
+#define reg_bif_dma_rw_ch0_ctrl___bus_mode___lsb 16
+#define reg_bif_dma_rw_ch0_ctrl___bus_mode___width 2
+#define reg_bif_dma_rw_ch0_ctrl___rate_en___lsb 18
+#define reg_bif_dma_rw_ch0_ctrl___rate_en___width 1
+#define reg_bif_dma_rw_ch0_ctrl___rate_en___bit 18
+#define reg_bif_dma_rw_ch0_ctrl___wr_all___lsb 19
+#define reg_bif_dma_rw_ch0_ctrl___wr_all___width 1
+#define reg_bif_dma_rw_ch0_ctrl___wr_all___bit 19
+#define reg_bif_dma_rw_ch0_ctrl_offset 0
+
+/* Register rw_ch0_addr, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch0_addr___addr___lsb 0
+#define reg_bif_dma_rw_ch0_addr___addr___width 32
+#define reg_bif_dma_rw_ch0_addr_offset 4
+
+/* Register rw_ch0_start, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch0_start___run___lsb 0
+#define reg_bif_dma_rw_ch0_start___run___width 1
+#define reg_bif_dma_rw_ch0_start___run___bit 0
+#define reg_bif_dma_rw_ch0_start_offset 8
+
+/* Register rw_ch0_cnt, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch0_cnt___start_cnt___lsb 0
+#define reg_bif_dma_rw_ch0_cnt___start_cnt___width 16
+#define reg_bif_dma_rw_ch0_cnt_offset 12
+
+/* Register r_ch0_stat, scope bif_dma, type r */
+#define reg_bif_dma_r_ch0_stat___cnt___lsb 0
+#define reg_bif_dma_r_ch0_stat___cnt___width 16
+#define reg_bif_dma_r_ch0_stat___run___lsb 31
+#define reg_bif_dma_r_ch0_stat___run___width 1
+#define reg_bif_dma_r_ch0_stat___run___bit 31
+#define reg_bif_dma_r_ch0_stat_offset 16
+
+/* Register rw_ch1_ctrl, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch1_ctrl___bw___lsb 0
+#define reg_bif_dma_rw_ch1_ctrl___bw___width 2
+#define reg_bif_dma_rw_ch1_ctrl___burst_len___lsb 2
+#define reg_bif_dma_rw_ch1_ctrl___burst_len___width 1
+#define reg_bif_dma_rw_ch1_ctrl___burst_len___bit 2
+#define reg_bif_dma_rw_ch1_ctrl___cont___lsb 3
+#define reg_bif_dma_rw_ch1_ctrl___cont___width 1
+#define reg_bif_dma_rw_ch1_ctrl___cont___bit 3
+#define reg_bif_dma_rw_ch1_ctrl___end_discard___lsb 4
+#define reg_bif_dma_rw_ch1_ctrl___end_discard___width 1
+#define reg_bif_dma_rw_ch1_ctrl___end_discard___bit 4
+#define reg_bif_dma_rw_ch1_ctrl___cnt___lsb 5
+#define reg_bif_dma_rw_ch1_ctrl___cnt___width 1
+#define reg_bif_dma_rw_ch1_ctrl___cnt___bit 5
+#define reg_bif_dma_rw_ch1_ctrl___dreq_pin___lsb 6
+#define reg_bif_dma_rw_ch1_ctrl___dreq_pin___width 3
+#define reg_bif_dma_rw_ch1_ctrl___dreq_mode___lsb 9
+#define reg_bif_dma_rw_ch1_ctrl___dreq_mode___width 2
+#define reg_bif_dma_rw_ch1_ctrl___tc_in_pin___lsb 11
+#define reg_bif_dma_rw_ch1_ctrl___tc_in_pin___width 3
+#define reg_bif_dma_rw_ch1_ctrl___tc_in_mode___lsb 14
+#define reg_bif_dma_rw_ch1_ctrl___tc_in_mode___width 2
+#define reg_bif_dma_rw_ch1_ctrl___bus_mode___lsb 16
+#define reg_bif_dma_rw_ch1_ctrl___bus_mode___width 2
+#define reg_bif_dma_rw_ch1_ctrl___rate_en___lsb 18
+#define reg_bif_dma_rw_ch1_ctrl___rate_en___width 1
+#define reg_bif_dma_rw_ch1_ctrl___rate_en___bit 18
+#define reg_bif_dma_rw_ch1_ctrl_offset 32
+
+/* Register rw_ch1_addr, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch1_addr___addr___lsb 0
+#define reg_bif_dma_rw_ch1_addr___addr___width 32
+#define reg_bif_dma_rw_ch1_addr_offset 36
+
+/* Register rw_ch1_start, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch1_start___run___lsb 0
+#define reg_bif_dma_rw_ch1_start___run___width 1
+#define reg_bif_dma_rw_ch1_start___run___bit 0
+#define reg_bif_dma_rw_ch1_start_offset 40
+
+/* Register rw_ch1_cnt, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch1_cnt___start_cnt___lsb 0
+#define reg_bif_dma_rw_ch1_cnt___start_cnt___width 16
+#define reg_bif_dma_rw_ch1_cnt_offset 44
+
+/* Register r_ch1_stat, scope bif_dma, type r */
+#define reg_bif_dma_r_ch1_stat___cnt___lsb 0
+#define reg_bif_dma_r_ch1_stat___cnt___width 16
+#define reg_bif_dma_r_ch1_stat___run___lsb 31
+#define reg_bif_dma_r_ch1_stat___run___width 1
+#define reg_bif_dma_r_ch1_stat___run___bit 31
+#define reg_bif_dma_r_ch1_stat_offset 48
+
+/* Register rw_ch2_ctrl, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch2_ctrl___bw___lsb 0
+#define reg_bif_dma_rw_ch2_ctrl___bw___width 2
+#define reg_bif_dma_rw_ch2_ctrl___burst_len___lsb 2
+#define reg_bif_dma_rw_ch2_ctrl___burst_len___width 1
+#define reg_bif_dma_rw_ch2_ctrl___burst_len___bit 2
+#define reg_bif_dma_rw_ch2_ctrl___cont___lsb 3
+#define reg_bif_dma_rw_ch2_ctrl___cont___width 1
+#define reg_bif_dma_rw_ch2_ctrl___cont___bit 3
+#define reg_bif_dma_rw_ch2_ctrl___end_pad___lsb 4
+#define reg_bif_dma_rw_ch2_ctrl___end_pad___width 1
+#define reg_bif_dma_rw_ch2_ctrl___end_pad___bit 4
+#define reg_bif_dma_rw_ch2_ctrl___cnt___lsb 5
+#define reg_bif_dma_rw_ch2_ctrl___cnt___width 1
+#define reg_bif_dma_rw_ch2_ctrl___cnt___bit 5
+#define reg_bif_dma_rw_ch2_ctrl___dreq_pin___lsb 6
+#define reg_bif_dma_rw_ch2_ctrl___dreq_pin___width 3
+#define reg_bif_dma_rw_ch2_ctrl___dreq_mode___lsb 9
+#define reg_bif_dma_rw_ch2_ctrl___dreq_mode___width 2
+#define reg_bif_dma_rw_ch2_ctrl___tc_in_pin___lsb 11
+#define reg_bif_dma_rw_ch2_ctrl___tc_in_pin___width 3
+#define reg_bif_dma_rw_ch2_ctrl___tc_in_mode___lsb 14
+#define reg_bif_dma_rw_ch2_ctrl___tc_in_mode___width 2
+#define reg_bif_dma_rw_ch2_ctrl___bus_mode___lsb 16
+#define reg_bif_dma_rw_ch2_ctrl___bus_mode___width 2
+#define reg_bif_dma_rw_ch2_ctrl___rate_en___lsb 18
+#define reg_bif_dma_rw_ch2_ctrl___rate_en___width 1
+#define reg_bif_dma_rw_ch2_ctrl___rate_en___bit 18
+#define reg_bif_dma_rw_ch2_ctrl___wr_all___lsb 19
+#define reg_bif_dma_rw_ch2_ctrl___wr_all___width 1
+#define reg_bif_dma_rw_ch2_ctrl___wr_all___bit 19
+#define reg_bif_dma_rw_ch2_ctrl_offset 64
+
+/* Register rw_ch2_addr, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch2_addr___addr___lsb 0
+#define reg_bif_dma_rw_ch2_addr___addr___width 32
+#define reg_bif_dma_rw_ch2_addr_offset 68
+
+/* Register rw_ch2_start, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch2_start___run___lsb 0
+#define reg_bif_dma_rw_ch2_start___run___width 1
+#define reg_bif_dma_rw_ch2_start___run___bit 0
+#define reg_bif_dma_rw_ch2_start_offset 72
+
+/* Register rw_ch2_cnt, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch2_cnt___start_cnt___lsb 0
+#define reg_bif_dma_rw_ch2_cnt___start_cnt___width 16
+#define reg_bif_dma_rw_ch2_cnt_offset 76
+
+/* Register r_ch2_stat, scope bif_dma, type r */
+#define reg_bif_dma_r_ch2_stat___cnt___lsb 0
+#define reg_bif_dma_r_ch2_stat___cnt___width 16
+#define reg_bif_dma_r_ch2_stat___run___lsb 31
+#define reg_bif_dma_r_ch2_stat___run___width 1
+#define reg_bif_dma_r_ch2_stat___run___bit 31
+#define reg_bif_dma_r_ch2_stat_offset 80
+
+/* Register rw_ch3_ctrl, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch3_ctrl___bw___lsb 0
+#define reg_bif_dma_rw_ch3_ctrl___bw___width 2
+#define reg_bif_dma_rw_ch3_ctrl___burst_len___lsb 2
+#define reg_bif_dma_rw_ch3_ctrl___burst_len___width 1
+#define reg_bif_dma_rw_ch3_ctrl___burst_len___bit 2
+#define reg_bif_dma_rw_ch3_ctrl___cont___lsb 3
+#define reg_bif_dma_rw_ch3_ctrl___cont___width 1
+#define reg_bif_dma_rw_ch3_ctrl___cont___bit 3
+#define reg_bif_dma_rw_ch3_ctrl___end_discard___lsb 4
+#define reg_bif_dma_rw_ch3_ctrl___end_discard___width 1
+#define reg_bif_dma_rw_ch3_ctrl___end_discard___bit 4
+#define reg_bif_dma_rw_ch3_ctrl___cnt___lsb 5
+#define reg_bif_dma_rw_ch3_ctrl___cnt___width 1
+#define reg_bif_dma_rw_ch3_ctrl___cnt___bit 5
+#define reg_bif_dma_rw_ch3_ctrl___dreq_pin___lsb 6
+#define reg_bif_dma_rw_ch3_ctrl___dreq_pin___width 3
+#define reg_bif_dma_rw_ch3_ctrl___dreq_mode___lsb 9
+#define reg_bif_dma_rw_ch3_ctrl___dreq_mode___width 2
+#define reg_bif_dma_rw_ch3_ctrl___tc_in_pin___lsb 11
+#define reg_bif_dma_rw_ch3_ctrl___tc_in_pin___width 3
+#define reg_bif_dma_rw_ch3_ctrl___tc_in_mode___lsb 14
+#define reg_bif_dma_rw_ch3_ctrl___tc_in_mode___width 2
+#define reg_bif_dma_rw_ch3_ctrl___bus_mode___lsb 16
+#define reg_bif_dma_rw_ch3_ctrl___bus_mode___width 2
+#define reg_bif_dma_rw_ch3_ctrl___rate_en___lsb 18
+#define reg_bif_dma_rw_ch3_ctrl___rate_en___width 1
+#define reg_bif_dma_rw_ch3_ctrl___rate_en___bit 18
+#define reg_bif_dma_rw_ch3_ctrl_offset 96
+
+/* Register rw_ch3_addr, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch3_addr___addr___lsb 0
+#define reg_bif_dma_rw_ch3_addr___addr___width 32
+#define reg_bif_dma_rw_ch3_addr_offset 100
+
+/* Register rw_ch3_start, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch3_start___run___lsb 0
+#define reg_bif_dma_rw_ch3_start___run___width 1
+#define reg_bif_dma_rw_ch3_start___run___bit 0
+#define reg_bif_dma_rw_ch3_start_offset 104
+
+/* Register rw_ch3_cnt, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ch3_cnt___start_cnt___lsb 0
+#define reg_bif_dma_rw_ch3_cnt___start_cnt___width 16
+#define reg_bif_dma_rw_ch3_cnt_offset 108
+
+/* Register r_ch3_stat, scope bif_dma, type r */
+#define reg_bif_dma_r_ch3_stat___cnt___lsb 0
+#define reg_bif_dma_r_ch3_stat___cnt___width 16
+#define reg_bif_dma_r_ch3_stat___run___lsb 31
+#define reg_bif_dma_r_ch3_stat___run___width 1
+#define reg_bif_dma_r_ch3_stat___run___bit 31
+#define reg_bif_dma_r_ch3_stat_offset 112
+
+/* Register rw_intr_mask, scope bif_dma, type rw */
+#define reg_bif_dma_rw_intr_mask___ext_dma0___lsb 0
+#define reg_bif_dma_rw_intr_mask___ext_dma0___width 1
+#define reg_bif_dma_rw_intr_mask___ext_dma0___bit 0
+#define reg_bif_dma_rw_intr_mask___ext_dma1___lsb 1
+#define reg_bif_dma_rw_intr_mask___ext_dma1___width 1
+#define reg_bif_dma_rw_intr_mask___ext_dma1___bit 1
+#define reg_bif_dma_rw_intr_mask___ext_dma2___lsb 2
+#define reg_bif_dma_rw_intr_mask___ext_dma2___width 1
+#define reg_bif_dma_rw_intr_mask___ext_dma2___bit 2
+#define reg_bif_dma_rw_intr_mask___ext_dma3___lsb 3
+#define reg_bif_dma_rw_intr_mask___ext_dma3___width 1
+#define reg_bif_dma_rw_intr_mask___ext_dma3___bit 3
+#define reg_bif_dma_rw_intr_mask_offset 128
+
+/* Register rw_ack_intr, scope bif_dma, type rw */
+#define reg_bif_dma_rw_ack_intr___ext_dma0___lsb 0
+#define reg_bif_dma_rw_ack_intr___ext_dma0___width 1
+#define reg_bif_dma_rw_ack_intr___ext_dma0___bit 0
+#define reg_bif_dma_rw_ack_intr___ext_dma1___lsb 1
+#define reg_bif_dma_rw_ack_intr___ext_dma1___width 1
+#define reg_bif_dma_rw_ack_intr___ext_dma1___bit 1
+#define reg_bif_dma_rw_ack_intr___ext_dma2___lsb 2
+#define reg_bif_dma_rw_ack_intr___ext_dma2___width 1
+#define reg_bif_dma_rw_ack_intr___ext_dma2___bit 2
+#define reg_bif_dma_rw_ack_intr___ext_dma3___lsb 3
+#define reg_bif_dma_rw_ack_intr___ext_dma3___width 1
+#define reg_bif_dma_rw_ack_intr___ext_dma3___bit 3
+#define reg_bif_dma_rw_ack_intr_offset 132
+
+/* Register r_intr, scope bif_dma, type r */
+#define reg_bif_dma_r_intr___ext_dma0___lsb 0
+#define reg_bif_dma_r_intr___ext_dma0___width 1
+#define reg_bif_dma_r_intr___ext_dma0___bit 0
+#define reg_bif_dma_r_intr___ext_dma1___lsb 1
+#define reg_bif_dma_r_intr___ext_dma1___width 1
+#define reg_bif_dma_r_intr___ext_dma1___bit 1
+#define reg_bif_dma_r_intr___ext_dma2___lsb 2
+#define reg_bif_dma_r_intr___ext_dma2___width 1
+#define reg_bif_dma_r_intr___ext_dma2___bit 2
+#define reg_bif_dma_r_intr___ext_dma3___lsb 3
+#define reg_bif_dma_r_intr___ext_dma3___width 1
+#define reg_bif_dma_r_intr___ext_dma3___bit 3
+#define reg_bif_dma_r_intr_offset 136
+
+/* Register r_masked_intr, scope bif_dma, type r */
+#define reg_bif_dma_r_masked_intr___ext_dma0___lsb 0
+#define reg_bif_dma_r_masked_intr___ext_dma0___width 1
+#define reg_bif_dma_r_masked_intr___ext_dma0___bit 0
+#define reg_bif_dma_r_masked_intr___ext_dma1___lsb 1
+#define reg_bif_dma_r_masked_intr___ext_dma1___width 1
+#define reg_bif_dma_r_masked_intr___ext_dma1___bit 1
+#define reg_bif_dma_r_masked_intr___ext_dma2___lsb 2
+#define reg_bif_dma_r_masked_intr___ext_dma2___width 1
+#define reg_bif_dma_r_masked_intr___ext_dma2___bit 2
+#define reg_bif_dma_r_masked_intr___ext_dma3___lsb 3
+#define reg_bif_dma_r_masked_intr___ext_dma3___width 1
+#define reg_bif_dma_r_masked_intr___ext_dma3___bit 3
+#define reg_bif_dma_r_masked_intr_offset 140
+
+/* Register rw_pin0_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin0_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin0_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin0_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin0_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin0_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin0_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin0_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin0_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin0_cfg_offset 160
+
+/* Register rw_pin1_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin1_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin1_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin1_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin1_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin1_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin1_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin1_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin1_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin1_cfg_offset 164
+
+/* Register rw_pin2_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin2_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin2_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin2_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin2_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin2_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin2_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin2_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin2_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin2_cfg_offset 168
+
+/* Register rw_pin3_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin3_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin3_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin3_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin3_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin3_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin3_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin3_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin3_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin3_cfg_offset 172
+
+/* Register rw_pin4_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin4_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin4_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin4_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin4_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin4_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin4_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin4_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin4_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin4_cfg_offset 176
+
+/* Register rw_pin5_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin5_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin5_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin5_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin5_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin5_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin5_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin5_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin5_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin5_cfg_offset 180
+
+/* Register rw_pin6_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin6_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin6_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin6_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin6_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin6_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin6_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin6_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin6_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin6_cfg_offset 184
+
+/* Register rw_pin7_cfg, scope bif_dma, type rw */
+#define reg_bif_dma_rw_pin7_cfg___master_ch___lsb 0
+#define reg_bif_dma_rw_pin7_cfg___master_ch___width 2
+#define reg_bif_dma_rw_pin7_cfg___master_mode___lsb 2
+#define reg_bif_dma_rw_pin7_cfg___master_mode___width 3
+#define reg_bif_dma_rw_pin7_cfg___slave_ch___lsb 5
+#define reg_bif_dma_rw_pin7_cfg___slave_ch___width 2
+#define reg_bif_dma_rw_pin7_cfg___slave_mode___lsb 7
+#define reg_bif_dma_rw_pin7_cfg___slave_mode___width 3
+#define reg_bif_dma_rw_pin7_cfg_offset 188
+
+/* Register r_pin_stat, scope bif_dma, type r */
+#define reg_bif_dma_r_pin_stat___pin0___lsb 0
+#define reg_bif_dma_r_pin_stat___pin0___width 1
+#define reg_bif_dma_r_pin_stat___pin0___bit 0
+#define reg_bif_dma_r_pin_stat___pin1___lsb 1
+#define reg_bif_dma_r_pin_stat___pin1___width 1
+#define reg_bif_dma_r_pin_stat___pin1___bit 1
+#define reg_bif_dma_r_pin_stat___pin2___lsb 2
+#define reg_bif_dma_r_pin_stat___pin2___width 1
+#define reg_bif_dma_r_pin_stat___pin2___bit 2
+#define reg_bif_dma_r_pin_stat___pin3___lsb 3
+#define reg_bif_dma_r_pin_stat___pin3___width 1
+#define reg_bif_dma_r_pin_stat___pin3___bit 3
+#define reg_bif_dma_r_pin_stat___pin4___lsb 4
+#define reg_bif_dma_r_pin_stat___pin4___width 1
+#define reg_bif_dma_r_pin_stat___pin4___bit 4
+#define reg_bif_dma_r_pin_stat___pin5___lsb 5
+#define reg_bif_dma_r_pin_stat___pin5___width 1
+#define reg_bif_dma_r_pin_stat___pin5___bit 5
+#define reg_bif_dma_r_pin_stat___pin6___lsb 6
+#define reg_bif_dma_r_pin_stat___pin6___width 1
+#define reg_bif_dma_r_pin_stat___pin6___bit 6
+#define reg_bif_dma_r_pin_stat___pin7___lsb 7
+#define reg_bif_dma_r_pin_stat___pin7___width 1
+#define reg_bif_dma_r_pin_stat___pin7___bit 7
+#define reg_bif_dma_r_pin_stat_offset 192
+
+
+/* Constants */
+#define regk_bif_dma_as_master                    0x00000001
+#define regk_bif_dma_as_slave                     0x00000001
+#define regk_bif_dma_burst1                       0x00000000
+#define regk_bif_dma_burst8                       0x00000001
+#define regk_bif_dma_bw16                         0x00000001
+#define regk_bif_dma_bw32                         0x00000002
+#define regk_bif_dma_bw8                          0x00000000
+#define regk_bif_dma_dack                         0x00000006
+#define regk_bif_dma_dack_inv                     0x00000007
+#define regk_bif_dma_force                        0x00000001
+#define regk_bif_dma_hi                           0x00000003
+#define regk_bif_dma_inv                          0x00000003
+#define regk_bif_dma_lo                           0x00000002
+#define regk_bif_dma_master                       0x00000001
+#define regk_bif_dma_no                           0x00000000
+#define regk_bif_dma_norm                         0x00000002
+#define regk_bif_dma_off                          0x00000000
+#define regk_bif_dma_rw_ch0_ctrl_default          0x00000000
+#define regk_bif_dma_rw_ch0_start_default         0x00000000
+#define regk_bif_dma_rw_ch1_ctrl_default          0x00000000
+#define regk_bif_dma_rw_ch1_start_default         0x00000000
+#define regk_bif_dma_rw_ch2_ctrl_default          0x00000000
+#define regk_bif_dma_rw_ch2_start_default         0x00000000
+#define regk_bif_dma_rw_ch3_ctrl_default          0x00000000
+#define regk_bif_dma_rw_ch3_start_default         0x00000000
+#define regk_bif_dma_rw_intr_mask_default         0x00000000
+#define regk_bif_dma_rw_pin0_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin1_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin2_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin3_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin4_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin5_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin6_cfg_default          0x00000000
+#define regk_bif_dma_rw_pin7_cfg_default          0x00000000
+#define regk_bif_dma_slave                        0x00000002
+#define regk_bif_dma_sreq                         0x00000006
+#define regk_bif_dma_sreq_inv                     0x00000007
+#define regk_bif_dma_tc                           0x00000004
+#define regk_bif_dma_tc_inv                       0x00000005
+#define regk_bif_dma_yes                          0x00000001
+#endif /* __bif_dma_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h

@@ -0,0 +1,249 @@
+#ifndef __bif_slave_defs_asm_h
+#define __bif_slave_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/bif/rtl/bif_slave_regs.r
+ *     id:           bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp
+ *     last modfied: Mon Apr 11 16:06:34 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_slave_defs_asm.h ../../inst/bif/rtl/bif_slave_regs.r
+ *      id: $Id: bif_slave_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_slave_cfg, scope bif_slave, type rw */
+#define reg_bif_slave_rw_slave_cfg___slave_id___lsb 0
+#define reg_bif_slave_rw_slave_cfg___slave_id___width 3
+#define reg_bif_slave_rw_slave_cfg___use_slave_id___lsb 3
+#define reg_bif_slave_rw_slave_cfg___use_slave_id___width 1
+#define reg_bif_slave_rw_slave_cfg___use_slave_id___bit 3
+#define reg_bif_slave_rw_slave_cfg___boot_rdy___lsb 4
+#define reg_bif_slave_rw_slave_cfg___boot_rdy___width 1
+#define reg_bif_slave_rw_slave_cfg___boot_rdy___bit 4
+#define reg_bif_slave_rw_slave_cfg___loopback___lsb 5
+#define reg_bif_slave_rw_slave_cfg___loopback___width 1
+#define reg_bif_slave_rw_slave_cfg___loopback___bit 5
+#define reg_bif_slave_rw_slave_cfg___dis___lsb 6
+#define reg_bif_slave_rw_slave_cfg___dis___width 1
+#define reg_bif_slave_rw_slave_cfg___dis___bit 6
+#define reg_bif_slave_rw_slave_cfg_offset 0
+
+/* Register r_slave_mode, scope bif_slave, type r */
+#define reg_bif_slave_r_slave_mode___ch0_mode___lsb 0
+#define reg_bif_slave_r_slave_mode___ch0_mode___width 1
+#define reg_bif_slave_r_slave_mode___ch0_mode___bit 0
+#define reg_bif_slave_r_slave_mode___ch1_mode___lsb 1
+#define reg_bif_slave_r_slave_mode___ch1_mode___width 1
+#define reg_bif_slave_r_slave_mode___ch1_mode___bit 1
+#define reg_bif_slave_r_slave_mode___ch2_mode___lsb 2
+#define reg_bif_slave_r_slave_mode___ch2_mode___width 1
+#define reg_bif_slave_r_slave_mode___ch2_mode___bit 2
+#define reg_bif_slave_r_slave_mode___ch3_mode___lsb 3
+#define reg_bif_slave_r_slave_mode___ch3_mode___width 1
+#define reg_bif_slave_r_slave_mode___ch3_mode___bit 3
+#define reg_bif_slave_r_slave_mode_offset 4
+
+/* Register rw_ch0_cfg, scope bif_slave, type rw */
+#define reg_bif_slave_rw_ch0_cfg___rd_hold___lsb 0
+#define reg_bif_slave_rw_ch0_cfg___rd_hold___width 2
+#define reg_bif_slave_rw_ch0_cfg___access_mode___lsb 2
+#define reg_bif_slave_rw_ch0_cfg___access_mode___width 1
+#define reg_bif_slave_rw_ch0_cfg___access_mode___bit 2
+#define reg_bif_slave_rw_ch0_cfg___access_ctrl___lsb 3
+#define reg_bif_slave_rw_ch0_cfg___access_ctrl___width 1
+#define reg_bif_slave_rw_ch0_cfg___access_ctrl___bit 3
+#define reg_bif_slave_rw_ch0_cfg___data_cs___lsb 4
+#define reg_bif_slave_rw_ch0_cfg___data_cs___width 2
+#define reg_bif_slave_rw_ch0_cfg_offset 16
+
+/* Register rw_ch1_cfg, scope bif_slave, type rw */
+#define reg_bif_slave_rw_ch1_cfg___rd_hold___lsb 0
+#define reg_bif_slave_rw_ch1_cfg___rd_hold___width 2
+#define reg_bif_slave_rw_ch1_cfg___access_mode___lsb 2
+#define reg_bif_slave_rw_ch1_cfg___access_mode___width 1
+#define reg_bif_slave_rw_ch1_cfg___access_mode___bit 2
+#define reg_bif_slave_rw_ch1_cfg___access_ctrl___lsb 3
+#define reg_bif_slave_rw_ch1_cfg___access_ctrl___width 1
+#define reg_bif_slave_rw_ch1_cfg___access_ctrl___bit 3
+#define reg_bif_slave_rw_ch1_cfg___data_cs___lsb 4
+#define reg_bif_slave_rw_ch1_cfg___data_cs___width 2
+#define reg_bif_slave_rw_ch1_cfg_offset 20
+
+/* Register rw_ch2_cfg, scope bif_slave, type rw */
+#define reg_bif_slave_rw_ch2_cfg___rd_hold___lsb 0
+#define reg_bif_slave_rw_ch2_cfg___rd_hold___width 2
+#define reg_bif_slave_rw_ch2_cfg___access_mode___lsb 2
+#define reg_bif_slave_rw_ch2_cfg___access_mode___width 1
+#define reg_bif_slave_rw_ch2_cfg___access_mode___bit 2
+#define reg_bif_slave_rw_ch2_cfg___access_ctrl___lsb 3
+#define reg_bif_slave_rw_ch2_cfg___access_ctrl___width 1
+#define reg_bif_slave_rw_ch2_cfg___access_ctrl___bit 3
+#define reg_bif_slave_rw_ch2_cfg___data_cs___lsb 4
+#define reg_bif_slave_rw_ch2_cfg___data_cs___width 2
+#define reg_bif_slave_rw_ch2_cfg_offset 24
+
+/* Register rw_ch3_cfg, scope bif_slave, type rw */
+#define reg_bif_slave_rw_ch3_cfg___rd_hold___lsb 0
+#define reg_bif_slave_rw_ch3_cfg___rd_hold___width 2
+#define reg_bif_slave_rw_ch3_cfg___access_mode___lsb 2
+#define reg_bif_slave_rw_ch3_cfg___access_mode___width 1
+#define reg_bif_slave_rw_ch3_cfg___access_mode___bit 2
+#define reg_bif_slave_rw_ch3_cfg___access_ctrl___lsb 3
+#define reg_bif_slave_rw_ch3_cfg___access_ctrl___width 1
+#define reg_bif_slave_rw_ch3_cfg___access_ctrl___bit 3
+#define reg_bif_slave_rw_ch3_cfg___data_cs___lsb 4
+#define reg_bif_slave_rw_ch3_cfg___data_cs___width 2
+#define reg_bif_slave_rw_ch3_cfg_offset 28
+
+/* Register rw_arb_cfg, scope bif_slave, type rw */
+#define reg_bif_slave_rw_arb_cfg___brin_mode___lsb 0
+#define reg_bif_slave_rw_arb_cfg___brin_mode___width 1
+#define reg_bif_slave_rw_arb_cfg___brin_mode___bit 0
+#define reg_bif_slave_rw_arb_cfg___brout_mode___lsb 1
+#define reg_bif_slave_rw_arb_cfg___brout_mode___width 3
+#define reg_bif_slave_rw_arb_cfg___bg_mode___lsb 4
+#define reg_bif_slave_rw_arb_cfg___bg_mode___width 3
+#define reg_bif_slave_rw_arb_cfg___release___lsb 7
+#define reg_bif_slave_rw_arb_cfg___release___width 2
+#define reg_bif_slave_rw_arb_cfg___acquire___lsb 9
+#define reg_bif_slave_rw_arb_cfg___acquire___width 1
+#define reg_bif_slave_rw_arb_cfg___acquire___bit 9
+#define reg_bif_slave_rw_arb_cfg___settle_time___lsb 10
+#define reg_bif_slave_rw_arb_cfg___settle_time___width 2
+#define reg_bif_slave_rw_arb_cfg___dram_ctrl___lsb 12
+#define reg_bif_slave_rw_arb_cfg___dram_ctrl___width 1
+#define reg_bif_slave_rw_arb_cfg___dram_ctrl___bit 12
+#define reg_bif_slave_rw_arb_cfg_offset 32
+
+/* Register r_arb_stat, scope bif_slave, type r */
+#define reg_bif_slave_r_arb_stat___init_mode___lsb 0
+#define reg_bif_slave_r_arb_stat___init_mode___width 1
+#define reg_bif_slave_r_arb_stat___init_mode___bit 0
+#define reg_bif_slave_r_arb_stat___mode___lsb 1
+#define reg_bif_slave_r_arb_stat___mode___width 1
+#define reg_bif_slave_r_arb_stat___mode___bit 1
+#define reg_bif_slave_r_arb_stat___brin___lsb 2
+#define reg_bif_slave_r_arb_stat___brin___width 1
+#define reg_bif_slave_r_arb_stat___brin___bit 2
+#define reg_bif_slave_r_arb_stat___brout___lsb 3
+#define reg_bif_slave_r_arb_stat___brout___width 1
+#define reg_bif_slave_r_arb_stat___brout___bit 3
+#define reg_bif_slave_r_arb_stat___bg___lsb 4
+#define reg_bif_slave_r_arb_stat___bg___width 1
+#define reg_bif_slave_r_arb_stat___bg___bit 4
+#define reg_bif_slave_r_arb_stat_offset 36
+
+/* Register rw_intr_mask, scope bif_slave, type rw */
+#define reg_bif_slave_rw_intr_mask___bus_release___lsb 0
+#define reg_bif_slave_rw_intr_mask___bus_release___width 1
+#define reg_bif_slave_rw_intr_mask___bus_release___bit 0
+#define reg_bif_slave_rw_intr_mask___bus_acquire___lsb 1
+#define reg_bif_slave_rw_intr_mask___bus_acquire___width 1
+#define reg_bif_slave_rw_intr_mask___bus_acquire___bit 1
+#define reg_bif_slave_rw_intr_mask_offset 64
+
+/* Register rw_ack_intr, scope bif_slave, type rw */
+#define reg_bif_slave_rw_ack_intr___bus_release___lsb 0
+#define reg_bif_slave_rw_ack_intr___bus_release___width 1
+#define reg_bif_slave_rw_ack_intr___bus_release___bit 0
+#define reg_bif_slave_rw_ack_intr___bus_acquire___lsb 1
+#define reg_bif_slave_rw_ack_intr___bus_acquire___width 1
+#define reg_bif_slave_rw_ack_intr___bus_acquire___bit 1
+#define reg_bif_slave_rw_ack_intr_offset 68
+
+/* Register r_intr, scope bif_slave, type r */
+#define reg_bif_slave_r_intr___bus_release___lsb 0
+#define reg_bif_slave_r_intr___bus_release___width 1
+#define reg_bif_slave_r_intr___bus_release___bit 0
+#define reg_bif_slave_r_intr___bus_acquire___lsb 1
+#define reg_bif_slave_r_intr___bus_acquire___width 1
+#define reg_bif_slave_r_intr___bus_acquire___bit 1
+#define reg_bif_slave_r_intr_offset 72
+
+/* Register r_masked_intr, scope bif_slave, type r */
+#define reg_bif_slave_r_masked_intr___bus_release___lsb 0
+#define reg_bif_slave_r_masked_intr___bus_release___width 1
+#define reg_bif_slave_r_masked_intr___bus_release___bit 0
+#define reg_bif_slave_r_masked_intr___bus_acquire___lsb 1
+#define reg_bif_slave_r_masked_intr___bus_acquire___width 1
+#define reg_bif_slave_r_masked_intr___bus_acquire___bit 1
+#define reg_bif_slave_r_masked_intr_offset 76
+
+
+/* Constants */
+#define regk_bif_slave_active_hi                  0x00000003
+#define regk_bif_slave_active_lo                  0x00000002
+#define regk_bif_slave_addr                       0x00000000
+#define regk_bif_slave_always                     0x00000001
+#define regk_bif_slave_at_idle                    0x00000002
+#define regk_bif_slave_burst_end                  0x00000003
+#define regk_bif_slave_dma                        0x00000001
+#define regk_bif_slave_hi                         0x00000003
+#define regk_bif_slave_inv                        0x00000001
+#define regk_bif_slave_lo                         0x00000002
+#define regk_bif_slave_local                      0x00000001
+#define regk_bif_slave_master                     0x00000000
+#define regk_bif_slave_mode_reg                   0x00000001
+#define regk_bif_slave_no                         0x00000000
+#define regk_bif_slave_norm                       0x00000000
+#define regk_bif_slave_on_access                  0x00000000
+#define regk_bif_slave_rw_arb_cfg_default         0x00000000
+#define regk_bif_slave_rw_ch0_cfg_default         0x00000000
+#define regk_bif_slave_rw_ch1_cfg_default         0x00000000
+#define regk_bif_slave_rw_ch2_cfg_default         0x00000000
+#define regk_bif_slave_rw_ch3_cfg_default         0x00000000
+#define regk_bif_slave_rw_intr_mask_default       0x00000000
+#define regk_bif_slave_rw_slave_cfg_default       0x00000000
+#define regk_bif_slave_shared                     0x00000000
+#define regk_bif_slave_slave                      0x00000001
+#define regk_bif_slave_t0ns                       0x00000003
+#define regk_bif_slave_t10ns                      0x00000002
+#define regk_bif_slave_t20ns                      0x00000003
+#define regk_bif_slave_t30ns                      0x00000002
+#define regk_bif_slave_t40ns                      0x00000001
+#define regk_bif_slave_t50ns                      0x00000000
+#define regk_bif_slave_yes                        0x00000001
+#define regk_bif_slave_z                          0x00000004
+#endif /* __bif_slave_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h

@@ -0,0 +1,131 @@
+#ifndef __config_defs_asm_h
+#define __config_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../rtl/config_regs.r
+ *     id:           config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp
+ *     last modfied: Thu Mar  4 12:34:39 2004
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r
+ *      id: $Id: config_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register r_bootsel, scope config, type r */
+#define reg_config_r_bootsel___boot_mode___lsb 0
+#define reg_config_r_bootsel___boot_mode___width 3
+#define reg_config_r_bootsel___full_duplex___lsb 3
+#define reg_config_r_bootsel___full_duplex___width 1
+#define reg_config_r_bootsel___full_duplex___bit 3
+#define reg_config_r_bootsel___user___lsb 4
+#define reg_config_r_bootsel___user___width 1
+#define reg_config_r_bootsel___user___bit 4
+#define reg_config_r_bootsel___pll___lsb 5
+#define reg_config_r_bootsel___pll___width 1
+#define reg_config_r_bootsel___pll___bit 5
+#define reg_config_r_bootsel___flash_bw___lsb 6
+#define reg_config_r_bootsel___flash_bw___width 1
+#define reg_config_r_bootsel___flash_bw___bit 6
+#define reg_config_r_bootsel_offset 0
+
+/* Register rw_clk_ctrl, scope config, type rw */
+#define reg_config_rw_clk_ctrl___pll___lsb 0
+#define reg_config_rw_clk_ctrl___pll___width 1
+#define reg_config_rw_clk_ctrl___pll___bit 0
+#define reg_config_rw_clk_ctrl___cpu___lsb 1
+#define reg_config_rw_clk_ctrl___cpu___width 1
+#define reg_config_rw_clk_ctrl___cpu___bit 1
+#define reg_config_rw_clk_ctrl___iop___lsb 2
+#define reg_config_rw_clk_ctrl___iop___width 1
+#define reg_config_rw_clk_ctrl___iop___bit 2
+#define reg_config_rw_clk_ctrl___dma01_eth0___lsb 3
+#define reg_config_rw_clk_ctrl___dma01_eth0___width 1
+#define reg_config_rw_clk_ctrl___dma01_eth0___bit 3
+#define reg_config_rw_clk_ctrl___dma23___lsb 4
+#define reg_config_rw_clk_ctrl___dma23___width 1
+#define reg_config_rw_clk_ctrl___dma23___bit 4
+#define reg_config_rw_clk_ctrl___dma45___lsb 5
+#define reg_config_rw_clk_ctrl___dma45___width 1
+#define reg_config_rw_clk_ctrl___dma45___bit 5
+#define reg_config_rw_clk_ctrl___dma67___lsb 6
+#define reg_config_rw_clk_ctrl___dma67___width 1
+#define reg_config_rw_clk_ctrl___dma67___bit 6
+#define reg_config_rw_clk_ctrl___dma89_strcop___lsb 7
+#define reg_config_rw_clk_ctrl___dma89_strcop___width 1
+#define reg_config_rw_clk_ctrl___dma89_strcop___bit 7
+#define reg_config_rw_clk_ctrl___bif___lsb 8
+#define reg_config_rw_clk_ctrl___bif___width 1
+#define reg_config_rw_clk_ctrl___bif___bit 8
+#define reg_config_rw_clk_ctrl___fix_io___lsb 9
+#define reg_config_rw_clk_ctrl___fix_io___width 1
+#define reg_config_rw_clk_ctrl___fix_io___bit 9
+#define reg_config_rw_clk_ctrl_offset 4
+
+/* Register rw_pad_ctrl, scope config, type rw */
+#define reg_config_rw_pad_ctrl___usb_susp___lsb 0
+#define reg_config_rw_pad_ctrl___usb_susp___width 1
+#define reg_config_rw_pad_ctrl___usb_susp___bit 0
+#define reg_config_rw_pad_ctrl___phyrst_n___lsb 1
+#define reg_config_rw_pad_ctrl___phyrst_n___width 1
+#define reg_config_rw_pad_ctrl___phyrst_n___bit 1
+#define reg_config_rw_pad_ctrl_offset 8
+
+
+/* Constants */
+#define regk_config_bw16                          0x00000000
+#define regk_config_bw32                          0x00000001
+#define regk_config_master                        0x00000005
+#define regk_config_nand                          0x00000003
+#define regk_config_net_rx                        0x00000001
+#define regk_config_net_tx_rx                     0x00000002
+#define regk_config_no                            0x00000000
+#define regk_config_none                          0x00000007
+#define regk_config_nor                           0x00000000
+#define regk_config_rw_clk_ctrl_default           0x00000002
+#define regk_config_rw_pad_ctrl_default           0x00000000
+#define regk_config_ser                           0x00000004
+#define regk_config_slave                         0x00000006
+#define regk_config_yes                           0x00000001
+#endif /* __config_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h

@@ -0,0 +1,41 @@
+/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version
+ from ../../inst/crisp/doc/cpu_vect.r
+version . */
+
+#ifndef _______INST_CRISP_DOC_CPU_VECT_R
+#define _______INST_CRISP_DOC_CPU_VECT_R
+#define NMI_INTR_VECT	0x00
+#define RESERVED_1_INTR_VECT	0x01
+#define RESERVED_2_INTR_VECT	0x02
+#define SINGLE_STEP_INTR_VECT	0x03
+#define INSTR_TLB_REFILL_INTR_VECT	0x04
+#define INSTR_TLB_INV_INTR_VECT	0x05
+#define INSTR_TLB_ACC_INTR_VECT	0x06
+#define TLB_EX_INTR_VECT	0x07
+#define DATA_TLB_REFILL_INTR_VECT	0x08
+#define DATA_TLB_INV_INTR_VECT	0x09
+#define DATA_TLB_ACC_INTR_VECT	0x0a
+#define DATA_TLB_WE_INTR_VECT	0x0b
+#define HW_BP_INTR_VECT	0x0c
+#define RESERVED_D_INTR_VECT	0x0d
+#define RESERVED_E_INTR_VECT	0x0e
+#define RESERVED_F_INTR_VECT	0x0f
+#define BREAK_0_INTR_VECT	0x10
+#define BREAK_1_INTR_VECT	0x11
+#define BREAK_2_INTR_VECT	0x12
+#define BREAK_3_INTR_VECT	0x13
+#define BREAK_4_INTR_VECT	0x14
+#define BREAK_5_INTR_VECT	0x15
+#define BREAK_6_INTR_VECT	0x16
+#define BREAK_7_INTR_VECT	0x17
+#define BREAK_8_INTR_VECT	0x18
+#define BREAK_9_INTR_VECT	0x19
+#define BREAK_10_INTR_VECT	0x1a
+#define BREAK_11_INTR_VECT	0x1b
+#define BREAK_12_INTR_VECT	0x1c
+#define BREAK_13_INTR_VECT	0x1d
+#define BREAK_14_INTR_VECT	0x1e
+#define BREAK_15_INTR_VECT	0x1f
+#define MULTIPLE_INTR_VECT	0x30
+
+#endif

include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h

@@ -0,0 +1,114 @@
+#ifndef __cris_defs_asm_h
+#define __cris_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/crisp/doc/cris.r
+ *     id:           cris.r,v 1.6 2004/05/05 07:41:12 perz Exp
+ *     last modfied: Mon Apr 11 16:06:39 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/cris_defs_asm.h ../../inst/crisp/doc/cris.r
+ *      id: $Id: cris_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_gc_cfg, scope cris, type rw */
+#define reg_cris_rw_gc_cfg___ic___lsb 0
+#define reg_cris_rw_gc_cfg___ic___width 1
+#define reg_cris_rw_gc_cfg___ic___bit 0
+#define reg_cris_rw_gc_cfg___dc___lsb 1
+#define reg_cris_rw_gc_cfg___dc___width 1
+#define reg_cris_rw_gc_cfg___dc___bit 1
+#define reg_cris_rw_gc_cfg___im___lsb 2
+#define reg_cris_rw_gc_cfg___im___width 1
+#define reg_cris_rw_gc_cfg___im___bit 2
+#define reg_cris_rw_gc_cfg___dm___lsb 3
+#define reg_cris_rw_gc_cfg___dm___width 1
+#define reg_cris_rw_gc_cfg___dm___bit 3
+#define reg_cris_rw_gc_cfg___gb___lsb 4
+#define reg_cris_rw_gc_cfg___gb___width 1
+#define reg_cris_rw_gc_cfg___gb___bit 4
+#define reg_cris_rw_gc_cfg___gk___lsb 5
+#define reg_cris_rw_gc_cfg___gk___width 1
+#define reg_cris_rw_gc_cfg___gk___bit 5
+#define reg_cris_rw_gc_cfg___gp___lsb 6
+#define reg_cris_rw_gc_cfg___gp___width 1
+#define reg_cris_rw_gc_cfg___gp___bit 6
+#define reg_cris_rw_gc_cfg_offset 0
+
+/* Register rw_gc_ccs, scope cris, type rw */
+#define reg_cris_rw_gc_ccs_offset 4
+
+/* Register rw_gc_srs, scope cris, type rw */
+#define reg_cris_rw_gc_srs___srs___lsb 0
+#define reg_cris_rw_gc_srs___srs___width 8
+#define reg_cris_rw_gc_srs_offset 8
+
+/* Register rw_gc_nrp, scope cris, type rw */
+#define reg_cris_rw_gc_nrp_offset 12
+
+/* Register rw_gc_exs, scope cris, type rw */
+#define reg_cris_rw_gc_exs_offset 16
+
+/* Register rw_gc_eda, scope cris, type rw */
+#define reg_cris_rw_gc_eda_offset 20
+
+/* Register rw_gc_r0, scope cris, type rw */
+#define reg_cris_rw_gc_r0_offset 32
+
+/* Register rw_gc_r1, scope cris, type rw */
+#define reg_cris_rw_gc_r1_offset 36
+
+/* Register rw_gc_r2, scope cris, type rw */
+#define reg_cris_rw_gc_r2_offset 40
+
+/* Register rw_gc_r3, scope cris, type rw */
+#define reg_cris_rw_gc_r3_offset 44
+
+
+/* Constants */
+#define regk_cris_no                              0x00000000
+#define regk_cris_rw_gc_cfg_default               0x00000000
+#define regk_cris_yes                             0x00000001
+#endif /* __cris_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/cris_supp_reg.h

@@ -0,0 +1,10 @@
+#define RW_GC_CFG	0
+#define RW_GC_CCS	1
+#define RW_GC_SRS	2
+#define RW_GC_NRP	3
+#define RW_GC_EXS	4
+#define RW_GC_EDA	5
+#define RW_GC_R0	8
+#define RW_GC_R1	9
+#define RW_GC_R2	10
+#define RW_GC_R3	11

include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h

@@ -0,0 +1,368 @@
+#ifndef __dma_defs_asm_h
+#define __dma_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/dma/inst/dma_common/rtl/dma_regdes.r
+ *     id:           dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp
+ *     last modfied: Mon Apr 11 16:06:51 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/dma_defs_asm.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r
+ *      id: $Id: dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_data, scope dma, type rw */
+#define reg_dma_rw_data_offset 0
+
+/* Register rw_data_next, scope dma, type rw */
+#define reg_dma_rw_data_next_offset 4
+
+/* Register rw_data_buf, scope dma, type rw */
+#define reg_dma_rw_data_buf_offset 8
+
+/* Register rw_data_ctrl, scope dma, type rw */
+#define reg_dma_rw_data_ctrl___eol___lsb 0
+#define reg_dma_rw_data_ctrl___eol___width 1
+#define reg_dma_rw_data_ctrl___eol___bit 0
+#define reg_dma_rw_data_ctrl___out_eop___lsb 3
+#define reg_dma_rw_data_ctrl___out_eop___width 1
+#define reg_dma_rw_data_ctrl___out_eop___bit 3
+#define reg_dma_rw_data_ctrl___intr___lsb 4
+#define reg_dma_rw_data_ctrl___intr___width 1
+#define reg_dma_rw_data_ctrl___intr___bit 4
+#define reg_dma_rw_data_ctrl___wait___lsb 5
+#define reg_dma_rw_data_ctrl___wait___width 1
+#define reg_dma_rw_data_ctrl___wait___bit 5
+#define reg_dma_rw_data_ctrl_offset 12
+
+/* Register rw_data_stat, scope dma, type rw */
+#define reg_dma_rw_data_stat___in_eop___lsb 3
+#define reg_dma_rw_data_stat___in_eop___width 1
+#define reg_dma_rw_data_stat___in_eop___bit 3
+#define reg_dma_rw_data_stat_offset 16
+
+/* Register rw_data_md, scope dma, type rw */
+#define reg_dma_rw_data_md___md___lsb 0
+#define reg_dma_rw_data_md___md___width 16
+#define reg_dma_rw_data_md_offset 20
+
+/* Register rw_data_md_s, scope dma, type rw */
+#define reg_dma_rw_data_md_s___md_s___lsb 0
+#define reg_dma_rw_data_md_s___md_s___width 16
+#define reg_dma_rw_data_md_s_offset 24
+
+/* Register rw_data_after, scope dma, type rw */
+#define reg_dma_rw_data_after_offset 28
+
+/* Register rw_ctxt, scope dma, type rw */
+#define reg_dma_rw_ctxt_offset 32
+
+/* Register rw_ctxt_next, scope dma, type rw */
+#define reg_dma_rw_ctxt_next_offset 36
+
+/* Register rw_ctxt_ctrl, scope dma, type rw */
+#define reg_dma_rw_ctxt_ctrl___eol___lsb 0
+#define reg_dma_rw_ctxt_ctrl___eol___width 1
+#define reg_dma_rw_ctxt_ctrl___eol___bit 0
+#define reg_dma_rw_ctxt_ctrl___intr___lsb 4
+#define reg_dma_rw_ctxt_ctrl___intr___width 1
+#define reg_dma_rw_ctxt_ctrl___intr___bit 4
+#define reg_dma_rw_ctxt_ctrl___store_mode___lsb 6
+#define reg_dma_rw_ctxt_ctrl___store_mode___width 1
+#define reg_dma_rw_ctxt_ctrl___store_mode___bit 6
+#define reg_dma_rw_ctxt_ctrl___en___lsb 7
+#define reg_dma_rw_ctxt_ctrl___en___width 1
+#define reg_dma_rw_ctxt_ctrl___en___bit 7
+#define reg_dma_rw_ctxt_ctrl_offset 40
+
+/* Register rw_ctxt_stat, scope dma, type rw */
+#define reg_dma_rw_ctxt_stat___dis___lsb 7
+#define reg_dma_rw_ctxt_stat___dis___width 1
+#define reg_dma_rw_ctxt_stat___dis___bit 7
+#define reg_dma_rw_ctxt_stat_offset 44
+
+/* Register rw_ctxt_md0, scope dma, type rw */
+#define reg_dma_rw_ctxt_md0___md0___lsb 0
+#define reg_dma_rw_ctxt_md0___md0___width 16
+#define reg_dma_rw_ctxt_md0_offset 48
+
+/* Register rw_ctxt_md0_s, scope dma, type rw */
+#define reg_dma_rw_ctxt_md0_s___md0_s___lsb 0
+#define reg_dma_rw_ctxt_md0_s___md0_s___width 16
+#define reg_dma_rw_ctxt_md0_s_offset 52
+
+/* Register rw_ctxt_md1, scope dma, type rw */
+#define reg_dma_rw_ctxt_md1_offset 56
+
+/* Register rw_ctxt_md1_s, scope dma, type rw */
+#define reg_dma_rw_ctxt_md1_s_offset 60
+
+/* Register rw_ctxt_md2, scope dma, type rw */
+#define reg_dma_rw_ctxt_md2_offset 64
+
+/* Register rw_ctxt_md2_s, scope dma, type rw */
+#define reg_dma_rw_ctxt_md2_s_offset 68
+
+/* Register rw_ctxt_md3, scope dma, type rw */
+#define reg_dma_rw_ctxt_md3_offset 72
+
+/* Register rw_ctxt_md3_s, scope dma, type rw */
+#define reg_dma_rw_ctxt_md3_s_offset 76
+
+/* Register rw_ctxt_md4, scope dma, type rw */
+#define reg_dma_rw_ctxt_md4_offset 80
+
+/* Register rw_ctxt_md4_s, scope dma, type rw */
+#define reg_dma_rw_ctxt_md4_s_offset 84
+
+/* Register rw_saved_data, scope dma, type rw */
+#define reg_dma_rw_saved_data_offset 88
+
+/* Register rw_saved_data_buf, scope dma, type rw */
+#define reg_dma_rw_saved_data_buf_offset 92
+
+/* Register rw_group, scope dma, type rw */
+#define reg_dma_rw_group_offset 96
+
+/* Register rw_group_next, scope dma, type rw */
+#define reg_dma_rw_group_next_offset 100
+
+/* Register rw_group_ctrl, scope dma, type rw */
+#define reg_dma_rw_group_ctrl___eol___lsb 0
+#define reg_dma_rw_group_ctrl___eol___width 1
+#define reg_dma_rw_group_ctrl___eol___bit 0
+#define reg_dma_rw_group_ctrl___tol___lsb 1
+#define reg_dma_rw_group_ctrl___tol___width 1
+#define reg_dma_rw_group_ctrl___tol___bit 1
+#define reg_dma_rw_group_ctrl___bol___lsb 2
+#define reg_dma_rw_group_ctrl___bol___width 1
+#define reg_dma_rw_group_ctrl___bol___bit 2
+#define reg_dma_rw_group_ctrl___intr___lsb 4
+#define reg_dma_rw_group_ctrl___intr___width 1
+#define reg_dma_rw_group_ctrl___intr___bit 4
+#define reg_dma_rw_group_ctrl___en___lsb 7
+#define reg_dma_rw_group_ctrl___en___width 1
+#define reg_dma_rw_group_ctrl___en___bit 7
+#define reg_dma_rw_group_ctrl_offset 104
+
+/* Register rw_group_stat, scope dma, type rw */
+#define reg_dma_rw_group_stat___dis___lsb 7
+#define reg_dma_rw_group_stat___dis___width 1
+#define reg_dma_rw_group_stat___dis___bit 7
+#define reg_dma_rw_group_stat_offset 108
+
+/* Register rw_group_md, scope dma, type rw */
+#define reg_dma_rw_group_md___md___lsb 0
+#define reg_dma_rw_group_md___md___width 16
+#define reg_dma_rw_group_md_offset 112
+
+/* Register rw_group_md_s, scope dma, type rw */
+#define reg_dma_rw_group_md_s___md_s___lsb 0
+#define reg_dma_rw_group_md_s___md_s___width 16
+#define reg_dma_rw_group_md_s_offset 116
+
+/* Register rw_group_up, scope dma, type rw */
+#define reg_dma_rw_group_up_offset 120
+
+/* Register rw_group_down, scope dma, type rw */
+#define reg_dma_rw_group_down_offset 124
+
+/* Register rw_cmd, scope dma, type rw */
+#define reg_dma_rw_cmd___cont_data___lsb 0
+#define reg_dma_rw_cmd___cont_data___width 1
+#define reg_dma_rw_cmd___cont_data___bit 0
+#define reg_dma_rw_cmd_offset 128
+
+/* Register rw_cfg, scope dma, type rw */
+#define reg_dma_rw_cfg___en___lsb 0
+#define reg_dma_rw_cfg___en___width 1
+#define reg_dma_rw_cfg___en___bit 0
+#define reg_dma_rw_cfg___stop___lsb 1
+#define reg_dma_rw_cfg___stop___width 1
+#define reg_dma_rw_cfg___stop___bit 1
+#define reg_dma_rw_cfg_offset 132
+
+/* Register rw_stat, scope dma, type rw */
+#define reg_dma_rw_stat___mode___lsb 0
+#define reg_dma_rw_stat___mode___width 5
+#define reg_dma_rw_stat___list_state___lsb 5
+#define reg_dma_rw_stat___list_state___width 3
+#define reg_dma_rw_stat___stream_cmd_src___lsb 8
+#define reg_dma_rw_stat___stream_cmd_src___width 8
+#define reg_dma_rw_stat___buf___lsb 24
+#define reg_dma_rw_stat___buf___width 8
+#define reg_dma_rw_stat_offset 136
+
+/* Register rw_intr_mask, scope dma, type rw */
+#define reg_dma_rw_intr_mask___group___lsb 0
+#define reg_dma_rw_intr_mask___group___width 1
+#define reg_dma_rw_intr_mask___group___bit 0
+#define reg_dma_rw_intr_mask___ctxt___lsb 1
+#define reg_dma_rw_intr_mask___ctxt___width 1
+#define reg_dma_rw_intr_mask___ctxt___bit 1
+#define reg_dma_rw_intr_mask___data___lsb 2
+#define reg_dma_rw_intr_mask___data___width 1
+#define reg_dma_rw_intr_mask___data___bit 2
+#define reg_dma_rw_intr_mask___in_eop___lsb 3
+#define reg_dma_rw_intr_mask___in_eop___width 1
+#define reg_dma_rw_intr_mask___in_eop___bit 3
+#define reg_dma_rw_intr_mask___stream_cmd___lsb 4
+#define reg_dma_rw_intr_mask___stream_cmd___width 1
+#define reg_dma_rw_intr_mask___stream_cmd___bit 4
+#define reg_dma_rw_intr_mask_offset 140
+
+/* Register rw_ack_intr, scope dma, type rw */
+#define reg_dma_rw_ack_intr___group___lsb 0
+#define reg_dma_rw_ack_intr___group___width 1
+#define reg_dma_rw_ack_intr___group___bit 0
+#define reg_dma_rw_ack_intr___ctxt___lsb 1
+#define reg_dma_rw_ack_intr___ctxt___width 1
+#define reg_dma_rw_ack_intr___ctxt___bit 1
+#define reg_dma_rw_ack_intr___data___lsb 2
+#define reg_dma_rw_ack_intr___data___width 1
+#define reg_dma_rw_ack_intr___data___bit 2
+#define reg_dma_rw_ack_intr___in_eop___lsb 3
+#define reg_dma_rw_ack_intr___in_eop___width 1
+#define reg_dma_rw_ack_intr___in_eop___bit 3
+#define reg_dma_rw_ack_intr___stream_cmd___lsb 4
+#define reg_dma_rw_ack_intr___stream_cmd___width 1
+#define reg_dma_rw_ack_intr___stream_cmd___bit 4
+#define reg_dma_rw_ack_intr_offset 144
+
+/* Register r_intr, scope dma, type r */
+#define reg_dma_r_intr___group___lsb 0
+#define reg_dma_r_intr___group___width 1
+#define reg_dma_r_intr___group___bit 0
+#define reg_dma_r_intr___ctxt___lsb 1
+#define reg_dma_r_intr___ctxt___width 1
+#define reg_dma_r_intr___ctxt___bit 1
+#define reg_dma_r_intr___data___lsb 2
+#define reg_dma_r_intr___data___width 1
+#define reg_dma_r_intr___data___bit 2
+#define reg_dma_r_intr___in_eop___lsb 3
+#define reg_dma_r_intr___in_eop___width 1
+#define reg_dma_r_intr___in_eop___bit 3
+#define reg_dma_r_intr___stream_cmd___lsb 4
+#define reg_dma_r_intr___stream_cmd___width 1
+#define reg_dma_r_intr___stream_cmd___bit 4
+#define reg_dma_r_intr_offset 148
+
+/* Register r_masked_intr, scope dma, type r */
+#define reg_dma_r_masked_intr___group___lsb 0
+#define reg_dma_r_masked_intr___group___width 1
+#define reg_dma_r_masked_intr___group___bit 0
+#define reg_dma_r_masked_intr___ctxt___lsb 1
+#define reg_dma_r_masked_intr___ctxt___width 1
+#define reg_dma_r_masked_intr___ctxt___bit 1
+#define reg_dma_r_masked_intr___data___lsb 2
+#define reg_dma_r_masked_intr___data___width 1
+#define reg_dma_r_masked_intr___data___bit 2
+#define reg_dma_r_masked_intr___in_eop___lsb 3
+#define reg_dma_r_masked_intr___in_eop___width 1
+#define reg_dma_r_masked_intr___in_eop___bit 3
+#define reg_dma_r_masked_intr___stream_cmd___lsb 4
+#define reg_dma_r_masked_intr___stream_cmd___width 1
+#define reg_dma_r_masked_intr___stream_cmd___bit 4
+#define reg_dma_r_masked_intr_offset 152
+
+/* Register rw_stream_cmd, scope dma, type rw */
+#define reg_dma_rw_stream_cmd___cmd___lsb 0
+#define reg_dma_rw_stream_cmd___cmd___width 10
+#define reg_dma_rw_stream_cmd___n___lsb 16
+#define reg_dma_rw_stream_cmd___n___width 8
+#define reg_dma_rw_stream_cmd___busy___lsb 31
+#define reg_dma_rw_stream_cmd___busy___width 1
+#define reg_dma_rw_stream_cmd___busy___bit 31
+#define reg_dma_rw_stream_cmd_offset 156
+
+
+/* Constants */
+#define regk_dma_ack_pkt                          0x00000100
+#define regk_dma_anytime                          0x00000001
+#define regk_dma_array                            0x00000008
+#define regk_dma_burst                            0x00000020
+#define regk_dma_client                           0x00000002
+#define regk_dma_copy_next                        0x00000010
+#define regk_dma_copy_up                          0x00000020
+#define regk_dma_data_at_eol                      0x00000001
+#define regk_dma_dis_c                            0x00000010
+#define regk_dma_dis_g                            0x00000020
+#define regk_dma_idle                             0x00000001
+#define regk_dma_intern                           0x00000004
+#define regk_dma_load_c                           0x00000200
+#define regk_dma_load_c_n                         0x00000280
+#define regk_dma_load_c_next                      0x00000240
+#define regk_dma_load_d                           0x00000140
+#define regk_dma_load_g                           0x00000300
+#define regk_dma_load_g_down                      0x000003c0
+#define regk_dma_load_g_next                      0x00000340
+#define regk_dma_load_g_up                        0x00000380
+#define regk_dma_next_en                          0x00000010
+#define regk_dma_next_pkt                         0x00000010
+#define regk_dma_no                               0x00000000
+#define regk_dma_only_at_wait                     0x00000000
+#define regk_dma_restore                          0x00000020
+#define regk_dma_rst                              0x00000001
+#define regk_dma_running                          0x00000004
+#define regk_dma_rw_cfg_default                   0x00000000
+#define regk_dma_rw_cmd_default                   0x00000000
+#define regk_dma_rw_intr_mask_default             0x00000000
+#define regk_dma_rw_stat_default                  0x00000101
+#define regk_dma_rw_stream_cmd_default            0x00000000
+#define regk_dma_save_down                        0x00000020
+#define regk_dma_save_up                          0x00000020
+#define regk_dma_set_reg                          0x00000050
+#define regk_dma_set_w_size1                      0x00000190
+#define regk_dma_set_w_size2                      0x000001a0
+#define regk_dma_set_w_size4                      0x000001c0
+#define regk_dma_stopped                          0x00000002
+#define regk_dma_store_c                          0x00000002
+#define regk_dma_store_descr                      0x00000000
+#define regk_dma_store_g                          0x00000004
+#define regk_dma_store_md                         0x00000001
+#define regk_dma_sw                               0x00000008
+#define regk_dma_update_down                      0x00000020
+#define regk_dma_yes                              0x00000001
+#endif /* __dma_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h

@@ -0,0 +1,498 @@
+#ifndef __eth_defs_asm_h
+#define __eth_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/eth/rtl/eth_regs.r
+ *     id:           eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp
+ *     last modfied: Mon Apr 11 16:07:03 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/eth_defs_asm.h ../../inst/eth/rtl/eth_regs.r
+ *      id: $Id: eth_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_ma0_lo, scope eth, type rw */
+#define reg_eth_rw_ma0_lo___addr___lsb 0
+#define reg_eth_rw_ma0_lo___addr___width 32
+#define reg_eth_rw_ma0_lo_offset 0
+
+/* Register rw_ma0_hi, scope eth, type rw */
+#define reg_eth_rw_ma0_hi___addr___lsb 0
+#define reg_eth_rw_ma0_hi___addr___width 16
+#define reg_eth_rw_ma0_hi_offset 4
+
+/* Register rw_ma1_lo, scope eth, type rw */
+#define reg_eth_rw_ma1_lo___addr___lsb 0
+#define reg_eth_rw_ma1_lo___addr___width 32
+#define reg_eth_rw_ma1_lo_offset 8
+
+/* Register rw_ma1_hi, scope eth, type rw */
+#define reg_eth_rw_ma1_hi___addr___lsb 0
+#define reg_eth_rw_ma1_hi___addr___width 16
+#define reg_eth_rw_ma1_hi_offset 12
+
+/* Register rw_ga_lo, scope eth, type rw */
+#define reg_eth_rw_ga_lo___table___lsb 0
+#define reg_eth_rw_ga_lo___table___width 32
+#define reg_eth_rw_ga_lo_offset 16
+
+/* Register rw_ga_hi, scope eth, type rw */
+#define reg_eth_rw_ga_hi___table___lsb 0
+#define reg_eth_rw_ga_hi___table___width 32
+#define reg_eth_rw_ga_hi_offset 20
+
+/* Register rw_gen_ctrl, scope eth, type rw */
+#define reg_eth_rw_gen_ctrl___en___lsb 0
+#define reg_eth_rw_gen_ctrl___en___width 1
+#define reg_eth_rw_gen_ctrl___en___bit 0
+#define reg_eth_rw_gen_ctrl___phy___lsb 1
+#define reg_eth_rw_gen_ctrl___phy___width 2
+#define reg_eth_rw_gen_ctrl___protocol___lsb 3
+#define reg_eth_rw_gen_ctrl___protocol___width 1
+#define reg_eth_rw_gen_ctrl___protocol___bit 3
+#define reg_eth_rw_gen_ctrl___loopback___lsb 4
+#define reg_eth_rw_gen_ctrl___loopback___width 1
+#define reg_eth_rw_gen_ctrl___loopback___bit 4
+#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___lsb 5
+#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___width 1
+#define reg_eth_rw_gen_ctrl___flow_ctrl_dis___bit 5
+#define reg_eth_rw_gen_ctrl_offset 24
+
+/* Register rw_rec_ctrl, scope eth, type rw */
+#define reg_eth_rw_rec_ctrl___ma0___lsb 0
+#define reg_eth_rw_rec_ctrl___ma0___width 1
+#define reg_eth_rw_rec_ctrl___ma0___bit 0
+#define reg_eth_rw_rec_ctrl___ma1___lsb 1
+#define reg_eth_rw_rec_ctrl___ma1___width 1
+#define reg_eth_rw_rec_ctrl___ma1___bit 1
+#define reg_eth_rw_rec_ctrl___individual___lsb 2
+#define reg_eth_rw_rec_ctrl___individual___width 1
+#define reg_eth_rw_rec_ctrl___individual___bit 2
+#define reg_eth_rw_rec_ctrl___broadcast___lsb 3
+#define reg_eth_rw_rec_ctrl___broadcast___width 1
+#define reg_eth_rw_rec_ctrl___broadcast___bit 3
+#define reg_eth_rw_rec_ctrl___undersize___lsb 4
+#define reg_eth_rw_rec_ctrl___undersize___width 1
+#define reg_eth_rw_rec_ctrl___undersize___bit 4
+#define reg_eth_rw_rec_ctrl___oversize___lsb 5
+#define reg_eth_rw_rec_ctrl___oversize___width 1
+#define reg_eth_rw_rec_ctrl___oversize___bit 5
+#define reg_eth_rw_rec_ctrl___bad_crc___lsb 6
+#define reg_eth_rw_rec_ctrl___bad_crc___width 1
+#define reg_eth_rw_rec_ctrl___bad_crc___bit 6
+#define reg_eth_rw_rec_ctrl___duplex___lsb 7
+#define reg_eth_rw_rec_ctrl___duplex___width 1
+#define reg_eth_rw_rec_ctrl___duplex___bit 7
+#define reg_eth_rw_rec_ctrl___max_size___lsb 8
+#define reg_eth_rw_rec_ctrl___max_size___width 1
+#define reg_eth_rw_rec_ctrl___max_size___bit 8
+#define reg_eth_rw_rec_ctrl_offset 28
+
+/* Register rw_tr_ctrl, scope eth, type rw */
+#define reg_eth_rw_tr_ctrl___crc___lsb 0
+#define reg_eth_rw_tr_ctrl___crc___width 1
+#define reg_eth_rw_tr_ctrl___crc___bit 0
+#define reg_eth_rw_tr_ctrl___pad___lsb 1
+#define reg_eth_rw_tr_ctrl___pad___width 1
+#define reg_eth_rw_tr_ctrl___pad___bit 1
+#define reg_eth_rw_tr_ctrl___retry___lsb 2
+#define reg_eth_rw_tr_ctrl___retry___width 1
+#define reg_eth_rw_tr_ctrl___retry___bit 2
+#define reg_eth_rw_tr_ctrl___ignore_col___lsb 3
+#define reg_eth_rw_tr_ctrl___ignore_col___width 1
+#define reg_eth_rw_tr_ctrl___ignore_col___bit 3
+#define reg_eth_rw_tr_ctrl___cancel___lsb 4
+#define reg_eth_rw_tr_ctrl___cancel___width 1
+#define reg_eth_rw_tr_ctrl___cancel___bit 4
+#define reg_eth_rw_tr_ctrl___hsh_delay___lsb 5
+#define reg_eth_rw_tr_ctrl___hsh_delay___width 1
+#define reg_eth_rw_tr_ctrl___hsh_delay___bit 5
+#define reg_eth_rw_tr_ctrl___ignore_crs___lsb 6
+#define reg_eth_rw_tr_ctrl___ignore_crs___width 1
+#define reg_eth_rw_tr_ctrl___ignore_crs___bit 6
+#define reg_eth_rw_tr_ctrl_offset 32
+
+/* Register rw_clr_err, scope eth, type rw */
+#define reg_eth_rw_clr_err___clr___lsb 0
+#define reg_eth_rw_clr_err___clr___width 1
+#define reg_eth_rw_clr_err___clr___bit 0
+#define reg_eth_rw_clr_err_offset 36
+
+/* Register rw_mgm_ctrl, scope eth, type rw */
+#define reg_eth_rw_mgm_ctrl___mdio___lsb 0
+#define reg_eth_rw_mgm_ctrl___mdio___width 1
+#define reg_eth_rw_mgm_ctrl___mdio___bit 0
+#define reg_eth_rw_mgm_ctrl___mdoe___lsb 1
+#define reg_eth_rw_mgm_ctrl___mdoe___width 1
+#define reg_eth_rw_mgm_ctrl___mdoe___bit 1
+#define reg_eth_rw_mgm_ctrl___mdc___lsb 2
+#define reg_eth_rw_mgm_ctrl___mdc___width 1
+#define reg_eth_rw_mgm_ctrl___mdc___bit 2
+#define reg_eth_rw_mgm_ctrl___phyclk___lsb 3
+#define reg_eth_rw_mgm_ctrl___phyclk___width 1
+#define reg_eth_rw_mgm_ctrl___phyclk___bit 3
+#define reg_eth_rw_mgm_ctrl___txdata___lsb 4
+#define reg_eth_rw_mgm_ctrl___txdata___width 4
+#define reg_eth_rw_mgm_ctrl___txen___lsb 8
+#define reg_eth_rw_mgm_ctrl___txen___width 1
+#define reg_eth_rw_mgm_ctrl___txen___bit 8
+#define reg_eth_rw_mgm_ctrl_offset 40
+
+/* Register r_stat, scope eth, type r */
+#define reg_eth_r_stat___mdio___lsb 0
+#define reg_eth_r_stat___mdio___width 1
+#define reg_eth_r_stat___mdio___bit 0
+#define reg_eth_r_stat___exc_col___lsb 1
+#define reg_eth_r_stat___exc_col___width 1
+#define reg_eth_r_stat___exc_col___bit 1
+#define reg_eth_r_stat___urun___lsb 2
+#define reg_eth_r_stat___urun___width 1
+#define reg_eth_r_stat___urun___bit 2
+#define reg_eth_r_stat___phyclk___lsb 3
+#define reg_eth_r_stat___phyclk___width 1
+#define reg_eth_r_stat___phyclk___bit 3
+#define reg_eth_r_stat___txdata___lsb 4
+#define reg_eth_r_stat___txdata___width 4
+#define reg_eth_r_stat___txen___lsb 8
+#define reg_eth_r_stat___txen___width 1
+#define reg_eth_r_stat___txen___bit 8
+#define reg_eth_r_stat___col___lsb 9
+#define reg_eth_r_stat___col___width 1
+#define reg_eth_r_stat___col___bit 9
+#define reg_eth_r_stat___crs___lsb 10
+#define reg_eth_r_stat___crs___width 1
+#define reg_eth_r_stat___crs___bit 10
+#define reg_eth_r_stat___txclk___lsb 11
+#define reg_eth_r_stat___txclk___width 1
+#define reg_eth_r_stat___txclk___bit 11
+#define reg_eth_r_stat___rxdata___lsb 12
+#define reg_eth_r_stat___rxdata___width 4
+#define reg_eth_r_stat___rxer___lsb 16
+#define reg_eth_r_stat___rxer___width 1
+#define reg_eth_r_stat___rxer___bit 16
+#define reg_eth_r_stat___rxdv___lsb 17
+#define reg_eth_r_stat___rxdv___width 1
+#define reg_eth_r_stat___rxdv___bit 17
+#define reg_eth_r_stat___rxclk___lsb 18
+#define reg_eth_r_stat___rxclk___width 1
+#define reg_eth_r_stat___rxclk___bit 18
+#define reg_eth_r_stat_offset 44
+
+/* Register rs_rec_cnt, scope eth, type rs */
+#define reg_eth_rs_rec_cnt___crc_err___lsb 0
+#define reg_eth_rs_rec_cnt___crc_err___width 8
+#define reg_eth_rs_rec_cnt___align_err___lsb 8
+#define reg_eth_rs_rec_cnt___align_err___width 8
+#define reg_eth_rs_rec_cnt___oversize___lsb 16
+#define reg_eth_rs_rec_cnt___oversize___width 8
+#define reg_eth_rs_rec_cnt___congestion___lsb 24
+#define reg_eth_rs_rec_cnt___congestion___width 8
+#define reg_eth_rs_rec_cnt_offset 48
+
+/* Register r_rec_cnt, scope eth, type r */
+#define reg_eth_r_rec_cnt___crc_err___lsb 0
+#define reg_eth_r_rec_cnt___crc_err___width 8
+#define reg_eth_r_rec_cnt___align_err___lsb 8
+#define reg_eth_r_rec_cnt___align_err___width 8
+#define reg_eth_r_rec_cnt___oversize___lsb 16
+#define reg_eth_r_rec_cnt___oversize___width 8
+#define reg_eth_r_rec_cnt___congestion___lsb 24
+#define reg_eth_r_rec_cnt___congestion___width 8
+#define reg_eth_r_rec_cnt_offset 52
+
+/* Register rs_tr_cnt, scope eth, type rs */
+#define reg_eth_rs_tr_cnt___single_col___lsb 0
+#define reg_eth_rs_tr_cnt___single_col___width 8
+#define reg_eth_rs_tr_cnt___mult_col___lsb 8
+#define reg_eth_rs_tr_cnt___mult_col___width 8
+#define reg_eth_rs_tr_cnt___late_col___lsb 16
+#define reg_eth_rs_tr_cnt___late_col___width 8
+#define reg_eth_rs_tr_cnt___deferred___lsb 24
+#define reg_eth_rs_tr_cnt___deferred___width 8
+#define reg_eth_rs_tr_cnt_offset 56
+
+/* Register r_tr_cnt, scope eth, type r */
+#define reg_eth_r_tr_cnt___single_col___lsb 0
+#define reg_eth_r_tr_cnt___single_col___width 8
+#define reg_eth_r_tr_cnt___mult_col___lsb 8
+#define reg_eth_r_tr_cnt___mult_col___width 8
+#define reg_eth_r_tr_cnt___late_col___lsb 16
+#define reg_eth_r_tr_cnt___late_col___width 8
+#define reg_eth_r_tr_cnt___deferred___lsb 24
+#define reg_eth_r_tr_cnt___deferred___width 8
+#define reg_eth_r_tr_cnt_offset 60
+
+/* Register rs_phy_cnt, scope eth, type rs */
+#define reg_eth_rs_phy_cnt___carrier_loss___lsb 0
+#define reg_eth_rs_phy_cnt___carrier_loss___width 8
+#define reg_eth_rs_phy_cnt___sqe_err___lsb 8
+#define reg_eth_rs_phy_cnt___sqe_err___width 8
+#define reg_eth_rs_phy_cnt_offset 64
+
+/* Register r_phy_cnt, scope eth, type r */
+#define reg_eth_r_phy_cnt___carrier_loss___lsb 0
+#define reg_eth_r_phy_cnt___carrier_loss___width 8
+#define reg_eth_r_phy_cnt___sqe_err___lsb 8
+#define reg_eth_r_phy_cnt___sqe_err___width 8
+#define reg_eth_r_phy_cnt_offset 68
+
+/* Register rw_test_ctrl, scope eth, type rw */
+#define reg_eth_rw_test_ctrl___snmp_inc___lsb 0
+#define reg_eth_rw_test_ctrl___snmp_inc___width 1
+#define reg_eth_rw_test_ctrl___snmp_inc___bit 0
+#define reg_eth_rw_test_ctrl___snmp___lsb 1
+#define reg_eth_rw_test_ctrl___snmp___width 1
+#define reg_eth_rw_test_ctrl___snmp___bit 1
+#define reg_eth_rw_test_ctrl___backoff___lsb 2
+#define reg_eth_rw_test_ctrl___backoff___width 1
+#define reg_eth_rw_test_ctrl___backoff___bit 2
+#define reg_eth_rw_test_ctrl_offset 72
+
+/* Register rw_intr_mask, scope eth, type rw */
+#define reg_eth_rw_intr_mask___crc___lsb 0
+#define reg_eth_rw_intr_mask___crc___width 1
+#define reg_eth_rw_intr_mask___crc___bit 0
+#define reg_eth_rw_intr_mask___align___lsb 1
+#define reg_eth_rw_intr_mask___align___width 1
+#define reg_eth_rw_intr_mask___align___bit 1
+#define reg_eth_rw_intr_mask___oversize___lsb 2
+#define reg_eth_rw_intr_mask___oversize___width 1
+#define reg_eth_rw_intr_mask___oversize___bit 2
+#define reg_eth_rw_intr_mask___congestion___lsb 3
+#define reg_eth_rw_intr_mask___congestion___width 1
+#define reg_eth_rw_intr_mask___congestion___bit 3
+#define reg_eth_rw_intr_mask___single_col___lsb 4
+#define reg_eth_rw_intr_mask___single_col___width 1
+#define reg_eth_rw_intr_mask___single_col___bit 4
+#define reg_eth_rw_intr_mask___mult_col___lsb 5
+#define reg_eth_rw_intr_mask___mult_col___width 1
+#define reg_eth_rw_intr_mask___mult_col___bit 5
+#define reg_eth_rw_intr_mask___late_col___lsb 6
+#define reg_eth_rw_intr_mask___late_col___width 1
+#define reg_eth_rw_intr_mask___late_col___bit 6
+#define reg_eth_rw_intr_mask___deferred___lsb 7
+#define reg_eth_rw_intr_mask___deferred___width 1
+#define reg_eth_rw_intr_mask___deferred___bit 7
+#define reg_eth_rw_intr_mask___carrier_loss___lsb 8
+#define reg_eth_rw_intr_mask___carrier_loss___width 1
+#define reg_eth_rw_intr_mask___carrier_loss___bit 8
+#define reg_eth_rw_intr_mask___sqe_test_err___lsb 9
+#define reg_eth_rw_intr_mask___sqe_test_err___width 1
+#define reg_eth_rw_intr_mask___sqe_test_err___bit 9
+#define reg_eth_rw_intr_mask___orun___lsb 10
+#define reg_eth_rw_intr_mask___orun___width 1
+#define reg_eth_rw_intr_mask___orun___bit 10
+#define reg_eth_rw_intr_mask___urun___lsb 11
+#define reg_eth_rw_intr_mask___urun___width 1
+#define reg_eth_rw_intr_mask___urun___bit 11
+#define reg_eth_rw_intr_mask___excessive_col___lsb 12
+#define reg_eth_rw_intr_mask___excessive_col___width 1
+#define reg_eth_rw_intr_mask___excessive_col___bit 12
+#define reg_eth_rw_intr_mask___mdio___lsb 13
+#define reg_eth_rw_intr_mask___mdio___width 1
+#define reg_eth_rw_intr_mask___mdio___bit 13
+#define reg_eth_rw_intr_mask_offset 76
+
+/* Register rw_ack_intr, scope eth, type rw */
+#define reg_eth_rw_ack_intr___crc___lsb 0
+#define reg_eth_rw_ack_intr___crc___width 1
+#define reg_eth_rw_ack_intr___crc___bit 0
+#define reg_eth_rw_ack_intr___align___lsb 1
+#define reg_eth_rw_ack_intr___align___width 1
+#define reg_eth_rw_ack_intr___align___bit 1
+#define reg_eth_rw_ack_intr___oversize___lsb 2
+#define reg_eth_rw_ack_intr___oversize___width 1
+#define reg_eth_rw_ack_intr___oversize___bit 2
+#define reg_eth_rw_ack_intr___congestion___lsb 3
+#define reg_eth_rw_ack_intr___congestion___width 1
+#define reg_eth_rw_ack_intr___congestion___bit 3
+#define reg_eth_rw_ack_intr___single_col___lsb 4
+#define reg_eth_rw_ack_intr___single_col___width 1
+#define reg_eth_rw_ack_intr___single_col___bit 4
+#define reg_eth_rw_ack_intr___mult_col___lsb 5
+#define reg_eth_rw_ack_intr___mult_col___width 1
+#define reg_eth_rw_ack_intr___mult_col___bit 5
+#define reg_eth_rw_ack_intr___late_col___lsb 6
+#define reg_eth_rw_ack_intr___late_col___width 1
+#define reg_eth_rw_ack_intr___late_col___bit 6
+#define reg_eth_rw_ack_intr___deferred___lsb 7
+#define reg_eth_rw_ack_intr___deferred___width 1
+#define reg_eth_rw_ack_intr___deferred___bit 7
+#define reg_eth_rw_ack_intr___carrier_loss___lsb 8
+#define reg_eth_rw_ack_intr___carrier_loss___width 1
+#define reg_eth_rw_ack_intr___carrier_loss___bit 8
+#define reg_eth_rw_ack_intr___sqe_test_err___lsb 9
+#define reg_eth_rw_ack_intr___sqe_test_err___width 1
+#define reg_eth_rw_ack_intr___sqe_test_err___bit 9
+#define reg_eth_rw_ack_intr___orun___lsb 10
+#define reg_eth_rw_ack_intr___orun___width 1
+#define reg_eth_rw_ack_intr___orun___bit 10
+#define reg_eth_rw_ack_intr___urun___lsb 11
+#define reg_eth_rw_ack_intr___urun___width 1
+#define reg_eth_rw_ack_intr___urun___bit 11
+#define reg_eth_rw_ack_intr___excessive_col___lsb 12
+#define reg_eth_rw_ack_intr___excessive_col___width 1
+#define reg_eth_rw_ack_intr___excessive_col___bit 12
+#define reg_eth_rw_ack_intr___mdio___lsb 13
+#define reg_eth_rw_ack_intr___mdio___width 1
+#define reg_eth_rw_ack_intr___mdio___bit 13
+#define reg_eth_rw_ack_intr_offset 80
+
+/* Register r_intr, scope eth, type r */
+#define reg_eth_r_intr___crc___lsb 0
+#define reg_eth_r_intr___crc___width 1
+#define reg_eth_r_intr___crc___bit 0
+#define reg_eth_r_intr___align___lsb 1
+#define reg_eth_r_intr___align___width 1
+#define reg_eth_r_intr___align___bit 1
+#define reg_eth_r_intr___oversize___lsb 2
+#define reg_eth_r_intr___oversize___width 1
+#define reg_eth_r_intr___oversize___bit 2
+#define reg_eth_r_intr___congestion___lsb 3
+#define reg_eth_r_intr___congestion___width 1
+#define reg_eth_r_intr___congestion___bit 3
+#define reg_eth_r_intr___single_col___lsb 4
+#define reg_eth_r_intr___single_col___width 1
+#define reg_eth_r_intr___single_col___bit 4
+#define reg_eth_r_intr___mult_col___lsb 5
+#define reg_eth_r_intr___mult_col___width 1
+#define reg_eth_r_intr___mult_col___bit 5
+#define reg_eth_r_intr___late_col___lsb 6
+#define reg_eth_r_intr___late_col___width 1
+#define reg_eth_r_intr___late_col___bit 6
+#define reg_eth_r_intr___deferred___lsb 7
+#define reg_eth_r_intr___deferred___width 1
+#define reg_eth_r_intr___deferred___bit 7
+#define reg_eth_r_intr___carrier_loss___lsb 8
+#define reg_eth_r_intr___carrier_loss___width 1
+#define reg_eth_r_intr___carrier_loss___bit 8
+#define reg_eth_r_intr___sqe_test_err___lsb 9
+#define reg_eth_r_intr___sqe_test_err___width 1
+#define reg_eth_r_intr___sqe_test_err___bit 9
+#define reg_eth_r_intr___orun___lsb 10
+#define reg_eth_r_intr___orun___width 1
+#define reg_eth_r_intr___orun___bit 10
+#define reg_eth_r_intr___urun___lsb 11
+#define reg_eth_r_intr___urun___width 1
+#define reg_eth_r_intr___urun___bit 11
+#define reg_eth_r_intr___excessive_col___lsb 12
+#define reg_eth_r_intr___excessive_col___width 1
+#define reg_eth_r_intr___excessive_col___bit 12
+#define reg_eth_r_intr___mdio___lsb 13
+#define reg_eth_r_intr___mdio___width 1
+#define reg_eth_r_intr___mdio___bit 13
+#define reg_eth_r_intr_offset 84
+
+/* Register r_masked_intr, scope eth, type r */
+#define reg_eth_r_masked_intr___crc___lsb 0
+#define reg_eth_r_masked_intr___crc___width 1
+#define reg_eth_r_masked_intr___crc___bit 0
+#define reg_eth_r_masked_intr___align___lsb 1
+#define reg_eth_r_masked_intr___align___width 1
+#define reg_eth_r_masked_intr___align___bit 1
+#define reg_eth_r_masked_intr___oversize___lsb 2
+#define reg_eth_r_masked_intr___oversize___width 1
+#define reg_eth_r_masked_intr___oversize___bit 2
+#define reg_eth_r_masked_intr___congestion___lsb 3
+#define reg_eth_r_masked_intr___congestion___width 1
+#define reg_eth_r_masked_intr___congestion___bit 3
+#define reg_eth_r_masked_intr___single_col___lsb 4
+#define reg_eth_r_masked_intr___single_col___width 1
+#define reg_eth_r_masked_intr___single_col___bit 4
+#define reg_eth_r_masked_intr___mult_col___lsb 5
+#define reg_eth_r_masked_intr___mult_col___width 1
+#define reg_eth_r_masked_intr___mult_col___bit 5
+#define reg_eth_r_masked_intr___late_col___lsb 6
+#define reg_eth_r_masked_intr___late_col___width 1
+#define reg_eth_r_masked_intr___late_col___bit 6
+#define reg_eth_r_masked_intr___deferred___lsb 7
+#define reg_eth_r_masked_intr___deferred___width 1
+#define reg_eth_r_masked_intr___deferred___bit 7
+#define reg_eth_r_masked_intr___carrier_loss___lsb 8
+#define reg_eth_r_masked_intr___carrier_loss___width 1
+#define reg_eth_r_masked_intr___carrier_loss___bit 8
+#define reg_eth_r_masked_intr___sqe_test_err___lsb 9
+#define reg_eth_r_masked_intr___sqe_test_err___width 1
+#define reg_eth_r_masked_intr___sqe_test_err___bit 9
+#define reg_eth_r_masked_intr___orun___lsb 10
+#define reg_eth_r_masked_intr___orun___width 1
+#define reg_eth_r_masked_intr___orun___bit 10
+#define reg_eth_r_masked_intr___urun___lsb 11
+#define reg_eth_r_masked_intr___urun___width 1
+#define reg_eth_r_masked_intr___urun___bit 11
+#define reg_eth_r_masked_intr___excessive_col___lsb 12
+#define reg_eth_r_masked_intr___excessive_col___width 1
+#define reg_eth_r_masked_intr___excessive_col___bit 12
+#define reg_eth_r_masked_intr___mdio___lsb 13
+#define reg_eth_r_masked_intr___mdio___width 1
+#define reg_eth_r_masked_intr___mdio___bit 13
+#define reg_eth_r_masked_intr_offset 88
+
+
+/* Constants */
+#define regk_eth_discard                          0x00000000
+#define regk_eth_ether                            0x00000000
+#define regk_eth_full                             0x00000001
+#define regk_eth_half                             0x00000000
+#define regk_eth_hsh                              0x00000001
+#define regk_eth_mii                              0x00000001
+#define regk_eth_mii_clk                          0x00000000
+#define regk_eth_mii_rec                          0x00000002
+#define regk_eth_no                               0x00000000
+#define regk_eth_rec                              0x00000001
+#define regk_eth_rw_ga_hi_default                 0x00000000
+#define regk_eth_rw_ga_lo_default                 0x00000000
+#define regk_eth_rw_gen_ctrl_default              0x00000000
+#define regk_eth_rw_intr_mask_default             0x00000000
+#define regk_eth_rw_ma0_hi_default                0x00000000
+#define regk_eth_rw_ma0_lo_default                0x00000000
+#define regk_eth_rw_ma1_hi_default                0x00000000
+#define regk_eth_rw_ma1_lo_default                0x00000000
+#define regk_eth_rw_mgm_ctrl_default              0x00000000
+#define regk_eth_rw_test_ctrl_default             0x00000000
+#define regk_eth_size1518                         0x00000000
+#define regk_eth_size1522                         0x00000001
+#define regk_eth_yes                              0x00000001
+#endif /* __eth_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h

@@ -0,0 +1,276 @@
+#ifndef __gio_defs_asm_h
+#define __gio_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/gio/rtl/gio_regs.r
+ *     id:           gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp
+ *     last modfied: Mon Apr 11 16:07:47 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r
+ *      id: $Id: gio_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_pa_dout, scope gio, type rw */
+#define reg_gio_rw_pa_dout___data___lsb 0
+#define reg_gio_rw_pa_dout___data___width 8
+#define reg_gio_rw_pa_dout_offset 0
+
+/* Register r_pa_din, scope gio, type r */
+#define reg_gio_r_pa_din___data___lsb 0
+#define reg_gio_r_pa_din___data___width 8
+#define reg_gio_r_pa_din_offset 4
+
+/* Register rw_pa_oe, scope gio, type rw */
+#define reg_gio_rw_pa_oe___oe___lsb 0
+#define reg_gio_rw_pa_oe___oe___width 8
+#define reg_gio_rw_pa_oe_offset 8
+
+/* Register rw_intr_cfg, scope gio, type rw */
+#define reg_gio_rw_intr_cfg___pa0___lsb 0
+#define reg_gio_rw_intr_cfg___pa0___width 3
+#define reg_gio_rw_intr_cfg___pa1___lsb 3
+#define reg_gio_rw_intr_cfg___pa1___width 3
+#define reg_gio_rw_intr_cfg___pa2___lsb 6
+#define reg_gio_rw_intr_cfg___pa2___width 3
+#define reg_gio_rw_intr_cfg___pa3___lsb 9
+#define reg_gio_rw_intr_cfg___pa3___width 3
+#define reg_gio_rw_intr_cfg___pa4___lsb 12
+#define reg_gio_rw_intr_cfg___pa4___width 3
+#define reg_gio_rw_intr_cfg___pa5___lsb 15
+#define reg_gio_rw_intr_cfg___pa5___width 3
+#define reg_gio_rw_intr_cfg___pa6___lsb 18
+#define reg_gio_rw_intr_cfg___pa6___width 3
+#define reg_gio_rw_intr_cfg___pa7___lsb 21
+#define reg_gio_rw_intr_cfg___pa7___width 3
+#define reg_gio_rw_intr_cfg_offset 12
+
+/* Register rw_intr_mask, scope gio, type rw */
+#define reg_gio_rw_intr_mask___pa0___lsb 0
+#define reg_gio_rw_intr_mask___pa0___width 1
+#define reg_gio_rw_intr_mask___pa0___bit 0
+#define reg_gio_rw_intr_mask___pa1___lsb 1
+#define reg_gio_rw_intr_mask___pa1___width 1
+#define reg_gio_rw_intr_mask___pa1___bit 1
+#define reg_gio_rw_intr_mask___pa2___lsb 2
+#define reg_gio_rw_intr_mask___pa2___width 1
+#define reg_gio_rw_intr_mask___pa2___bit 2
+#define reg_gio_rw_intr_mask___pa3___lsb 3
+#define reg_gio_rw_intr_mask___pa3___width 1
+#define reg_gio_rw_intr_mask___pa3___bit 3
+#define reg_gio_rw_intr_mask___pa4___lsb 4
+#define reg_gio_rw_intr_mask___pa4___width 1
+#define reg_gio_rw_intr_mask___pa4___bit 4
+#define reg_gio_rw_intr_mask___pa5___lsb 5
+#define reg_gio_rw_intr_mask___pa5___width 1
+#define reg_gio_rw_intr_mask___pa5___bit 5
+#define reg_gio_rw_intr_mask___pa6___lsb 6
+#define reg_gio_rw_intr_mask___pa6___width 1
+#define reg_gio_rw_intr_mask___pa6___bit 6
+#define reg_gio_rw_intr_mask___pa7___lsb 7
+#define reg_gio_rw_intr_mask___pa7___width 1
+#define reg_gio_rw_intr_mask___pa7___bit 7
+#define reg_gio_rw_intr_mask_offset 16
+
+/* Register rw_ack_intr, scope gio, type rw */
+#define reg_gio_rw_ack_intr___pa0___lsb 0
+#define reg_gio_rw_ack_intr___pa0___width 1
+#define reg_gio_rw_ack_intr___pa0___bit 0
+#define reg_gio_rw_ack_intr___pa1___lsb 1
+#define reg_gio_rw_ack_intr___pa1___width 1
+#define reg_gio_rw_ack_intr___pa1___bit 1
+#define reg_gio_rw_ack_intr___pa2___lsb 2
+#define reg_gio_rw_ack_intr___pa2___width 1
+#define reg_gio_rw_ack_intr___pa2___bit 2
+#define reg_gio_rw_ack_intr___pa3___lsb 3
+#define reg_gio_rw_ack_intr___pa3___width 1
+#define reg_gio_rw_ack_intr___pa3___bit 3
+#define reg_gio_rw_ack_intr___pa4___lsb 4
+#define reg_gio_rw_ack_intr___pa4___width 1
+#define reg_gio_rw_ack_intr___pa4___bit 4
+#define reg_gio_rw_ack_intr___pa5___lsb 5
+#define reg_gio_rw_ack_intr___pa5___width 1
+#define reg_gio_rw_ack_intr___pa5___bit 5
+#define reg_gio_rw_ack_intr___pa6___lsb 6
+#define reg_gio_rw_ack_intr___pa6___width 1
+#define reg_gio_rw_ack_intr___pa6___bit 6
+#define reg_gio_rw_ack_intr___pa7___lsb 7
+#define reg_gio_rw_ack_intr___pa7___width 1
+#define reg_gio_rw_ack_intr___pa7___bit 7
+#define reg_gio_rw_ack_intr_offset 20
+
+/* Register r_intr, scope gio, type r */
+#define reg_gio_r_intr___pa0___lsb 0
+#define reg_gio_r_intr___pa0___width 1
+#define reg_gio_r_intr___pa0___bit 0
+#define reg_gio_r_intr___pa1___lsb 1
+#define reg_gio_r_intr___pa1___width 1
+#define reg_gio_r_intr___pa1___bit 1
+#define reg_gio_r_intr___pa2___lsb 2
+#define reg_gio_r_intr___pa2___width 1
+#define reg_gio_r_intr___pa2___bit 2
+#define reg_gio_r_intr___pa3___lsb 3
+#define reg_gio_r_intr___pa3___width 1
+#define reg_gio_r_intr___pa3___bit 3
+#define reg_gio_r_intr___pa4___lsb 4
+#define reg_gio_r_intr___pa4___width 1
+#define reg_gio_r_intr___pa4___bit 4
+#define reg_gio_r_intr___pa5___lsb 5
+#define reg_gio_r_intr___pa5___width 1
+#define reg_gio_r_intr___pa5___bit 5
+#define reg_gio_r_intr___pa6___lsb 6
+#define reg_gio_r_intr___pa6___width 1
+#define reg_gio_r_intr___pa6___bit 6
+#define reg_gio_r_intr___pa7___lsb 7
+#define reg_gio_r_intr___pa7___width 1
+#define reg_gio_r_intr___pa7___bit 7
+#define reg_gio_r_intr_offset 24
+
+/* Register r_masked_intr, scope gio, type r */
+#define reg_gio_r_masked_intr___pa0___lsb 0
+#define reg_gio_r_masked_intr___pa0___width 1
+#define reg_gio_r_masked_intr___pa0___bit 0
+#define reg_gio_r_masked_intr___pa1___lsb 1
+#define reg_gio_r_masked_intr___pa1___width 1
+#define reg_gio_r_masked_intr___pa1___bit 1
+#define reg_gio_r_masked_intr___pa2___lsb 2
+#define reg_gio_r_masked_intr___pa2___width 1
+#define reg_gio_r_masked_intr___pa2___bit 2
+#define reg_gio_r_masked_intr___pa3___lsb 3
+#define reg_gio_r_masked_intr___pa3___width 1
+#define reg_gio_r_masked_intr___pa3___bit 3
+#define reg_gio_r_masked_intr___pa4___lsb 4
+#define reg_gio_r_masked_intr___pa4___width 1
+#define reg_gio_r_masked_intr___pa4___bit 4
+#define reg_gio_r_masked_intr___pa5___lsb 5
+#define reg_gio_r_masked_intr___pa5___width 1
+#define reg_gio_r_masked_intr___pa5___bit 5
+#define reg_gio_r_masked_intr___pa6___lsb 6
+#define reg_gio_r_masked_intr___pa6___width 1
+#define reg_gio_r_masked_intr___pa6___bit 6
+#define reg_gio_r_masked_intr___pa7___lsb 7
+#define reg_gio_r_masked_intr___pa7___width 1
+#define reg_gio_r_masked_intr___pa7___bit 7
+#define reg_gio_r_masked_intr_offset 28
+
+/* Register rw_pb_dout, scope gio, type rw */
+#define reg_gio_rw_pb_dout___data___lsb 0
+#define reg_gio_rw_pb_dout___data___width 18
+#define reg_gio_rw_pb_dout_offset 32
+
+/* Register r_pb_din, scope gio, type r */
+#define reg_gio_r_pb_din___data___lsb 0
+#define reg_gio_r_pb_din___data___width 18
+#define reg_gio_r_pb_din_offset 36
+
+/* Register rw_pb_oe, scope gio, type rw */
+#define reg_gio_rw_pb_oe___oe___lsb 0
+#define reg_gio_rw_pb_oe___oe___width 18
+#define reg_gio_rw_pb_oe_offset 40
+
+/* Register rw_pc_dout, scope gio, type rw */
+#define reg_gio_rw_pc_dout___data___lsb 0
+#define reg_gio_rw_pc_dout___data___width 18
+#define reg_gio_rw_pc_dout_offset 48
+
+/* Register r_pc_din, scope gio, type r */
+#define reg_gio_r_pc_din___data___lsb 0
+#define reg_gio_r_pc_din___data___width 18
+#define reg_gio_r_pc_din_offset 52
+
+/* Register rw_pc_oe, scope gio, type rw */
+#define reg_gio_rw_pc_oe___oe___lsb 0
+#define reg_gio_rw_pc_oe___oe___width 18
+#define reg_gio_rw_pc_oe_offset 56
+
+/* Register rw_pd_dout, scope gio, type rw */
+#define reg_gio_rw_pd_dout___data___lsb 0
+#define reg_gio_rw_pd_dout___data___width 18
+#define reg_gio_rw_pd_dout_offset 64
+
+/* Register r_pd_din, scope gio, type r */
+#define reg_gio_r_pd_din___data___lsb 0
+#define reg_gio_r_pd_din___data___width 18
+#define reg_gio_r_pd_din_offset 68
+
+/* Register rw_pd_oe, scope gio, type rw */
+#define reg_gio_rw_pd_oe___oe___lsb 0
+#define reg_gio_rw_pd_oe___oe___width 18
+#define reg_gio_rw_pd_oe_offset 72
+
+/* Register rw_pe_dout, scope gio, type rw */
+#define reg_gio_rw_pe_dout___data___lsb 0
+#define reg_gio_rw_pe_dout___data___width 18
+#define reg_gio_rw_pe_dout_offset 80
+
+/* Register r_pe_din, scope gio, type r */
+#define reg_gio_r_pe_din___data___lsb 0
+#define reg_gio_r_pe_din___data___width 18
+#define reg_gio_r_pe_din_offset 84
+
+/* Register rw_pe_oe, scope gio, type rw */
+#define reg_gio_rw_pe_oe___oe___lsb 0
+#define reg_gio_rw_pe_oe___oe___width 18
+#define reg_gio_rw_pe_oe_offset 88
+
+
+/* Constants */
+#define regk_gio_anyedge                          0x00000007
+#define regk_gio_hi                               0x00000001
+#define regk_gio_lo                               0x00000002
+#define regk_gio_negedge                          0x00000006
+#define regk_gio_no                               0x00000000
+#define regk_gio_off                              0x00000000
+#define regk_gio_posedge                          0x00000005
+#define regk_gio_rw_intr_cfg_default              0x00000000
+#define regk_gio_rw_intr_mask_default             0x00000000
+#define regk_gio_rw_pa_oe_default                 0x00000000
+#define regk_gio_rw_pb_oe_default                 0x00000000
+#define regk_gio_rw_pc_oe_default                 0x00000000
+#define regk_gio_rw_pd_oe_default                 0x00000000
+#define regk_gio_rw_pe_oe_default                 0x00000000
+#define regk_gio_set                              0x00000003
+#define regk_gio_yes                              0x00000001
+#endif /* __gio_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/intr_vect.h

@@ -0,0 +1,38 @@
+/* Interrupt vector numbers autogenerated by /n/asic/design/tools/rdesc/src/rdes2intr version
+ from ../../inst/intr_vect/rtl/guinness/ivmask.config.r
+version . */
+
+#ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R
+#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R
+#define MEMARB_INTR_VECT	0x31
+#define GEN_IO_INTR_VECT	0x32
+#define IOP0_INTR_VECT	0x33
+#define IOP1_INTR_VECT	0x34
+#define IOP2_INTR_VECT	0x35
+#define IOP3_INTR_VECT	0x36
+#define DMA0_INTR_VECT	0x37
+#define DMA1_INTR_VECT	0x38
+#define DMA2_INTR_VECT	0x39
+#define DMA3_INTR_VECT	0x3a
+#define DMA4_INTR_VECT	0x3b
+#define DMA5_INTR_VECT	0x3c
+#define DMA6_INTR_VECT	0x3d
+#define DMA7_INTR_VECT	0x3e
+#define DMA8_INTR_VECT	0x3f
+#define DMA9_INTR_VECT	0x40
+#define ATA_INTR_VECT	0x41
+#define SSER0_INTR_VECT	0x42
+#define SSER1_INTR_VECT	0x43
+#define SER0_INTR_VECT	0x44
+#define SER1_INTR_VECT	0x45
+#define SER2_INTR_VECT	0x46
+#define SER3_INTR_VECT	0x47
+#define P21_INTR_VECT	0x48
+#define ETH0_INTR_VECT	0x49
+#define ETH1_INTR_VECT	0x4a
+#define TIMER_INTR_VECT	0x4b
+#define BIF_ARB_INTR_VECT	0x4c
+#define BIF_DMA_INTR_VECT	0x4d
+#define EXT_INTR_VECT	0x4e
+
+#endif

include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h

@@ -0,0 +1,355 @@
+#ifndef __intr_vect_defs_asm_h
+#define __intr_vect_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/intr_vect/rtl/guinness/ivmask.config.r
+ *     id:           ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp
+ *     last modfied: Mon Apr 11 16:08:03 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/intr_vect_defs_asm.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r
+ *      id: $Id: intr_vect_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_mask, scope intr_vect, type rw */
+#define reg_intr_vect_rw_mask___memarb___lsb 0
+#define reg_intr_vect_rw_mask___memarb___width 1
+#define reg_intr_vect_rw_mask___memarb___bit 0
+#define reg_intr_vect_rw_mask___gen_io___lsb 1
+#define reg_intr_vect_rw_mask___gen_io___width 1
+#define reg_intr_vect_rw_mask___gen_io___bit 1
+#define reg_intr_vect_rw_mask___iop0___lsb 2
+#define reg_intr_vect_rw_mask___iop0___width 1
+#define reg_intr_vect_rw_mask___iop0___bit 2
+#define reg_intr_vect_rw_mask___iop1___lsb 3
+#define reg_intr_vect_rw_mask___iop1___width 1
+#define reg_intr_vect_rw_mask___iop1___bit 3
+#define reg_intr_vect_rw_mask___iop2___lsb 4
+#define reg_intr_vect_rw_mask___iop2___width 1
+#define reg_intr_vect_rw_mask___iop2___bit 4
+#define reg_intr_vect_rw_mask___iop3___lsb 5
+#define reg_intr_vect_rw_mask___iop3___width 1
+#define reg_intr_vect_rw_mask___iop3___bit 5
+#define reg_intr_vect_rw_mask___dma0___lsb 6
+#define reg_intr_vect_rw_mask___dma0___width 1
+#define reg_intr_vect_rw_mask___dma0___bit 6
+#define reg_intr_vect_rw_mask___dma1___lsb 7
+#define reg_intr_vect_rw_mask___dma1___width 1
+#define reg_intr_vect_rw_mask___dma1___bit 7
+#define reg_intr_vect_rw_mask___dma2___lsb 8
+#define reg_intr_vect_rw_mask___dma2___width 1
+#define reg_intr_vect_rw_mask___dma2___bit 8
+#define reg_intr_vect_rw_mask___dma3___lsb 9
+#define reg_intr_vect_rw_mask___dma3___width 1
+#define reg_intr_vect_rw_mask___dma3___bit 9
+#define reg_intr_vect_rw_mask___dma4___lsb 10
+#define reg_intr_vect_rw_mask___dma4___width 1
+#define reg_intr_vect_rw_mask___dma4___bit 10
+#define reg_intr_vect_rw_mask___dma5___lsb 11
+#define reg_intr_vect_rw_mask___dma5___width 1
+#define reg_intr_vect_rw_mask___dma5___bit 11
+#define reg_intr_vect_rw_mask___dma6___lsb 12
+#define reg_intr_vect_rw_mask___dma6___width 1
+#define reg_intr_vect_rw_mask___dma6___bit 12
+#define reg_intr_vect_rw_mask___dma7___lsb 13
+#define reg_intr_vect_rw_mask___dma7___width 1
+#define reg_intr_vect_rw_mask___dma7___bit 13
+#define reg_intr_vect_rw_mask___dma8___lsb 14
+#define reg_intr_vect_rw_mask___dma8___width 1
+#define reg_intr_vect_rw_mask___dma8___bit 14
+#define reg_intr_vect_rw_mask___dma9___lsb 15
+#define reg_intr_vect_rw_mask___dma9___width 1
+#define reg_intr_vect_rw_mask___dma9___bit 15
+#define reg_intr_vect_rw_mask___ata___lsb 16
+#define reg_intr_vect_rw_mask___ata___width 1
+#define reg_intr_vect_rw_mask___ata___bit 16
+#define reg_intr_vect_rw_mask___sser0___lsb 17
+#define reg_intr_vect_rw_mask___sser0___width 1
+#define reg_intr_vect_rw_mask___sser0___bit 17
+#define reg_intr_vect_rw_mask___sser1___lsb 18
+#define reg_intr_vect_rw_mask___sser1___width 1
+#define reg_intr_vect_rw_mask___sser1___bit 18
+#define reg_intr_vect_rw_mask___ser0___lsb 19
+#define reg_intr_vect_rw_mask___ser0___width 1
+#define reg_intr_vect_rw_mask___ser0___bit 19
+#define reg_intr_vect_rw_mask___ser1___lsb 20
+#define reg_intr_vect_rw_mask___ser1___width 1
+#define reg_intr_vect_rw_mask___ser1___bit 20
+#define reg_intr_vect_rw_mask___ser2___lsb 21
+#define reg_intr_vect_rw_mask___ser2___width 1
+#define reg_intr_vect_rw_mask___ser2___bit 21
+#define reg_intr_vect_rw_mask___ser3___lsb 22
+#define reg_intr_vect_rw_mask___ser3___width 1
+#define reg_intr_vect_rw_mask___ser3___bit 22
+#define reg_intr_vect_rw_mask___p21___lsb 23
+#define reg_intr_vect_rw_mask___p21___width 1
+#define reg_intr_vect_rw_mask___p21___bit 23
+#define reg_intr_vect_rw_mask___eth0___lsb 24
+#define reg_intr_vect_rw_mask___eth0___width 1
+#define reg_intr_vect_rw_mask___eth0___bit 24
+#define reg_intr_vect_rw_mask___eth1___lsb 25
+#define reg_intr_vect_rw_mask___eth1___width 1
+#define reg_intr_vect_rw_mask___eth1___bit 25
+#define reg_intr_vect_rw_mask___timer___lsb 26
+#define reg_intr_vect_rw_mask___timer___width 1
+#define reg_intr_vect_rw_mask___timer___bit 26
+#define reg_intr_vect_rw_mask___bif_arb___lsb 27
+#define reg_intr_vect_rw_mask___bif_arb___width 1
+#define reg_intr_vect_rw_mask___bif_arb___bit 27
+#define reg_intr_vect_rw_mask___bif_dma___lsb 28
+#define reg_intr_vect_rw_mask___bif_dma___width 1
+#define reg_intr_vect_rw_mask___bif_dma___bit 28
+#define reg_intr_vect_rw_mask___ext___lsb 29
+#define reg_intr_vect_rw_mask___ext___width 1
+#define reg_intr_vect_rw_mask___ext___bit 29
+#define reg_intr_vect_rw_mask_offset 0
+
+/* Register r_vect, scope intr_vect, type r */
+#define reg_intr_vect_r_vect___memarb___lsb 0
+#define reg_intr_vect_r_vect___memarb___width 1
+#define reg_intr_vect_r_vect___memarb___bit 0
+#define reg_intr_vect_r_vect___gen_io___lsb 1
+#define reg_intr_vect_r_vect___gen_io___width 1
+#define reg_intr_vect_r_vect___gen_io___bit 1
+#define reg_intr_vect_r_vect___iop0___lsb 2
+#define reg_intr_vect_r_vect___iop0___width 1
+#define reg_intr_vect_r_vect___iop0___bit 2
+#define reg_intr_vect_r_vect___iop1___lsb 3
+#define reg_intr_vect_r_vect___iop1___width 1
+#define reg_intr_vect_r_vect___iop1___bit 3
+#define reg_intr_vect_r_vect___iop2___lsb 4
+#define reg_intr_vect_r_vect___iop2___width 1
+#define reg_intr_vect_r_vect___iop2___bit 4
+#define reg_intr_vect_r_vect___iop3___lsb 5
+#define reg_intr_vect_r_vect___iop3___width 1
+#define reg_intr_vect_r_vect___iop3___bit 5
+#define reg_intr_vect_r_vect___dma0___lsb 6
+#define reg_intr_vect_r_vect___dma0___width 1
+#define reg_intr_vect_r_vect___dma0___bit 6
+#define reg_intr_vect_r_vect___dma1___lsb 7
+#define reg_intr_vect_r_vect___dma1___width 1
+#define reg_intr_vect_r_vect___dma1___bit 7
+#define reg_intr_vect_r_vect___dma2___lsb 8
+#define reg_intr_vect_r_vect___dma2___width 1
+#define reg_intr_vect_r_vect___dma2___bit 8
+#define reg_intr_vect_r_vect___dma3___lsb 9
+#define reg_intr_vect_r_vect___dma3___width 1
+#define reg_intr_vect_r_vect___dma3___bit 9
+#define reg_intr_vect_r_vect___dma4___lsb 10
+#define reg_intr_vect_r_vect___dma4___width 1
+#define reg_intr_vect_r_vect___dma4___bit 10
+#define reg_intr_vect_r_vect___dma5___lsb 11
+#define reg_intr_vect_r_vect___dma5___width 1
+#define reg_intr_vect_r_vect___dma5___bit 11
+#define reg_intr_vect_r_vect___dma6___lsb 12
+#define reg_intr_vect_r_vect___dma6___width 1
+#define reg_intr_vect_r_vect___dma6___bit 12
+#define reg_intr_vect_r_vect___dma7___lsb 13
+#define reg_intr_vect_r_vect___dma7___width 1
+#define reg_intr_vect_r_vect___dma7___bit 13
+#define reg_intr_vect_r_vect___dma8___lsb 14
+#define reg_intr_vect_r_vect___dma8___width 1
+#define reg_intr_vect_r_vect___dma8___bit 14
+#define reg_intr_vect_r_vect___dma9___lsb 15
+#define reg_intr_vect_r_vect___dma9___width 1
+#define reg_intr_vect_r_vect___dma9___bit 15
+#define reg_intr_vect_r_vect___ata___lsb 16
+#define reg_intr_vect_r_vect___ata___width 1
+#define reg_intr_vect_r_vect___ata___bit 16
+#define reg_intr_vect_r_vect___sser0___lsb 17
+#define reg_intr_vect_r_vect___sser0___width 1
+#define reg_intr_vect_r_vect___sser0___bit 17
+#define reg_intr_vect_r_vect___sser1___lsb 18
+#define reg_intr_vect_r_vect___sser1___width 1
+#define reg_intr_vect_r_vect___sser1___bit 18
+#define reg_intr_vect_r_vect___ser0___lsb 19
+#define reg_intr_vect_r_vect___ser0___width 1
+#define reg_intr_vect_r_vect___ser0___bit 19
+#define reg_intr_vect_r_vect___ser1___lsb 20
+#define reg_intr_vect_r_vect___ser1___width 1
+#define reg_intr_vect_r_vect___ser1___bit 20
+#define reg_intr_vect_r_vect___ser2___lsb 21
+#define reg_intr_vect_r_vect___ser2___width 1
+#define reg_intr_vect_r_vect___ser2___bit 21
+#define reg_intr_vect_r_vect___ser3___lsb 22
+#define reg_intr_vect_r_vect___ser3___width 1
+#define reg_intr_vect_r_vect___ser3___bit 22
+#define reg_intr_vect_r_vect___p21___lsb 23
+#define reg_intr_vect_r_vect___p21___width 1
+#define reg_intr_vect_r_vect___p21___bit 23
+#define reg_intr_vect_r_vect___eth0___lsb 24
+#define reg_intr_vect_r_vect___eth0___width 1
+#define reg_intr_vect_r_vect___eth0___bit 24
+#define reg_intr_vect_r_vect___eth1___lsb 25
+#define reg_intr_vect_r_vect___eth1___width 1
+#define reg_intr_vect_r_vect___eth1___bit 25
+#define reg_intr_vect_r_vect___timer___lsb 26
+#define reg_intr_vect_r_vect___timer___width 1
+#define reg_intr_vect_r_vect___timer___bit 26
+#define reg_intr_vect_r_vect___bif_arb___lsb 27
+#define reg_intr_vect_r_vect___bif_arb___width 1
+#define reg_intr_vect_r_vect___bif_arb___bit 27
+#define reg_intr_vect_r_vect___bif_dma___lsb 28
+#define reg_intr_vect_r_vect___bif_dma___width 1
+#define reg_intr_vect_r_vect___bif_dma___bit 28
+#define reg_intr_vect_r_vect___ext___lsb 29
+#define reg_intr_vect_r_vect___ext___width 1
+#define reg_intr_vect_r_vect___ext___bit 29
+#define reg_intr_vect_r_vect_offset 4
+
+/* Register r_masked_vect, scope intr_vect, type r */
+#define reg_intr_vect_r_masked_vect___memarb___lsb 0
+#define reg_intr_vect_r_masked_vect___memarb___width 1
+#define reg_intr_vect_r_masked_vect___memarb___bit 0
+#define reg_intr_vect_r_masked_vect___gen_io___lsb 1
+#define reg_intr_vect_r_masked_vect___gen_io___width 1
+#define reg_intr_vect_r_masked_vect___gen_io___bit 1
+#define reg_intr_vect_r_masked_vect___iop0___lsb 2
+#define reg_intr_vect_r_masked_vect___iop0___width 1
+#define reg_intr_vect_r_masked_vect___iop0___bit 2
+#define reg_intr_vect_r_masked_vect___iop1___lsb 3
+#define reg_intr_vect_r_masked_vect___iop1___width 1
+#define reg_intr_vect_r_masked_vect___iop1___bit 3
+#define reg_intr_vect_r_masked_vect___iop2___lsb 4
+#define reg_intr_vect_r_masked_vect___iop2___width 1
+#define reg_intr_vect_r_masked_vect___iop2___bit 4
+#define reg_intr_vect_r_masked_vect___iop3___lsb 5
+#define reg_intr_vect_r_masked_vect___iop3___width 1
+#define reg_intr_vect_r_masked_vect___iop3___bit 5
+#define reg_intr_vect_r_masked_vect___dma0___lsb 6
+#define reg_intr_vect_r_masked_vect___dma0___width 1
+#define reg_intr_vect_r_masked_vect___dma0___bit 6
+#define reg_intr_vect_r_masked_vect___dma1___lsb 7
+#define reg_intr_vect_r_masked_vect___dma1___width 1
+#define reg_intr_vect_r_masked_vect___dma1___bit 7
+#define reg_intr_vect_r_masked_vect___dma2___lsb 8
+#define reg_intr_vect_r_masked_vect___dma2___width 1
+#define reg_intr_vect_r_masked_vect___dma2___bit 8
+#define reg_intr_vect_r_masked_vect___dma3___lsb 9
+#define reg_intr_vect_r_masked_vect___dma3___width 1
+#define reg_intr_vect_r_masked_vect___dma3___bit 9
+#define reg_intr_vect_r_masked_vect___dma4___lsb 10
+#define reg_intr_vect_r_masked_vect___dma4___width 1
+#define reg_intr_vect_r_masked_vect___dma4___bit 10
+#define reg_intr_vect_r_masked_vect___dma5___lsb 11
+#define reg_intr_vect_r_masked_vect___dma5___width 1
+#define reg_intr_vect_r_masked_vect___dma5___bit 11
+#define reg_intr_vect_r_masked_vect___dma6___lsb 12
+#define reg_intr_vect_r_masked_vect___dma6___width 1
+#define reg_intr_vect_r_masked_vect___dma6___bit 12
+#define reg_intr_vect_r_masked_vect___dma7___lsb 13
+#define reg_intr_vect_r_masked_vect___dma7___width 1
+#define reg_intr_vect_r_masked_vect___dma7___bit 13
+#define reg_intr_vect_r_masked_vect___dma8___lsb 14
+#define reg_intr_vect_r_masked_vect___dma8___width 1
+#define reg_intr_vect_r_masked_vect___dma8___bit 14
+#define reg_intr_vect_r_masked_vect___dma9___lsb 15
+#define reg_intr_vect_r_masked_vect___dma9___width 1
+#define reg_intr_vect_r_masked_vect___dma9___bit 15
+#define reg_intr_vect_r_masked_vect___ata___lsb 16
+#define reg_intr_vect_r_masked_vect___ata___width 1
+#define reg_intr_vect_r_masked_vect___ata___bit 16
+#define reg_intr_vect_r_masked_vect___sser0___lsb 17
+#define reg_intr_vect_r_masked_vect___sser0___width 1
+#define reg_intr_vect_r_masked_vect___sser0___bit 17
+#define reg_intr_vect_r_masked_vect___sser1___lsb 18
+#define reg_intr_vect_r_masked_vect___sser1___width 1
+#define reg_intr_vect_r_masked_vect___sser1___bit 18
+#define reg_intr_vect_r_masked_vect___ser0___lsb 19
+#define reg_intr_vect_r_masked_vect___ser0___width 1
+#define reg_intr_vect_r_masked_vect___ser0___bit 19
+#define reg_intr_vect_r_masked_vect___ser1___lsb 20
+#define reg_intr_vect_r_masked_vect___ser1___width 1
+#define reg_intr_vect_r_masked_vect___ser1___bit 20
+#define reg_intr_vect_r_masked_vect___ser2___lsb 21
+#define reg_intr_vect_r_masked_vect___ser2___width 1
+#define reg_intr_vect_r_masked_vect___ser2___bit 21
+#define reg_intr_vect_r_masked_vect___ser3___lsb 22
+#define reg_intr_vect_r_masked_vect___ser3___width 1
+#define reg_intr_vect_r_masked_vect___ser3___bit 22
+#define reg_intr_vect_r_masked_vect___p21___lsb 23
+#define reg_intr_vect_r_masked_vect___p21___width 1
+#define reg_intr_vect_r_masked_vect___p21___bit 23
+#define reg_intr_vect_r_masked_vect___eth0___lsb 24
+#define reg_intr_vect_r_masked_vect___eth0___width 1
+#define reg_intr_vect_r_masked_vect___eth0___bit 24
+#define reg_intr_vect_r_masked_vect___eth1___lsb 25
+#define reg_intr_vect_r_masked_vect___eth1___width 1
+#define reg_intr_vect_r_masked_vect___eth1___bit 25
+#define reg_intr_vect_r_masked_vect___timer___lsb 26
+#define reg_intr_vect_r_masked_vect___timer___width 1
+#define reg_intr_vect_r_masked_vect___timer___bit 26
+#define reg_intr_vect_r_masked_vect___bif_arb___lsb 27
+#define reg_intr_vect_r_masked_vect___bif_arb___width 1
+#define reg_intr_vect_r_masked_vect___bif_arb___bit 27
+#define reg_intr_vect_r_masked_vect___bif_dma___lsb 28
+#define reg_intr_vect_r_masked_vect___bif_dma___width 1
+#define reg_intr_vect_r_masked_vect___bif_dma___bit 28
+#define reg_intr_vect_r_masked_vect___ext___lsb 29
+#define reg_intr_vect_r_masked_vect___ext___width 1
+#define reg_intr_vect_r_masked_vect___ext___bit 29
+#define reg_intr_vect_r_masked_vect_offset 8
+
+/* Register r_nmi, scope intr_vect, type r */
+#define reg_intr_vect_r_nmi___ext___lsb 0
+#define reg_intr_vect_r_nmi___ext___width 1
+#define reg_intr_vect_r_nmi___ext___bit 0
+#define reg_intr_vect_r_nmi___watchdog___lsb 1
+#define reg_intr_vect_r_nmi___watchdog___width 1
+#define reg_intr_vect_r_nmi___watchdog___bit 1
+#define reg_intr_vect_r_nmi_offset 12
+
+/* Register r_guru, scope intr_vect, type r */
+#define reg_intr_vect_r_guru___jtag___lsb 0
+#define reg_intr_vect_r_guru___jtag___width 1
+#define reg_intr_vect_r_guru___jtag___bit 0
+#define reg_intr_vect_r_guru_offset 16
+
+
+/* Constants */
+#define regk_intr_vect_off                        0x00000000
+#define regk_intr_vect_on                         0x00000001
+#define regk_intr_vect_rw_mask_default            0x00000000
+#endif /* __intr_vect_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h

@@ -0,0 +1,69 @@
+#ifndef __irq_nmi_defs_asm_h
+#define __irq_nmi_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../mod/irq_nmi.r
+ *     id:           <not found>
+ *     last modfied: Thu Jan 22 09:22:43 2004
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/irq_nmi_defs_asm.h ../../mod/irq_nmi.r
+ *      id: $Id: irq_nmi_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_cmd, scope irq_nmi, type rw */
+#define reg_irq_nmi_rw_cmd___delay___lsb 0
+#define reg_irq_nmi_rw_cmd___delay___width 16
+#define reg_irq_nmi_rw_cmd___op___lsb 16
+#define reg_irq_nmi_rw_cmd___op___width 2
+#define reg_irq_nmi_rw_cmd_offset 0
+
+
+/* Constants */
+#define regk_irq_nmi_ack_irq                      0x00000002
+#define regk_irq_nmi_ack_nmi                      0x00000003
+#define regk_irq_nmi_irq                          0x00000000
+#define regk_irq_nmi_nmi                          0x00000001
+#endif /* __irq_nmi_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h

@@ -0,0 +1,579 @@
+#ifndef __marb_defs_asm_h
+#define __marb_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/memarb/rtl/guinness/marb_top.r
+ *     id:           <not found>
+ *     last modfied: Mon Apr 11 16:12:16 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r
+ *      id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+#define STRIDE_marb_rw_int_slots 4
+/* Register rw_int_slots, scope marb, type rw */
+#define reg_marb_rw_int_slots___owner___lsb 0
+#define reg_marb_rw_int_slots___owner___width 4
+#define reg_marb_rw_int_slots_offset 0
+
+#define STRIDE_marb_rw_ext_slots 4
+/* Register rw_ext_slots, scope marb, type rw */
+#define reg_marb_rw_ext_slots___owner___lsb 0
+#define reg_marb_rw_ext_slots___owner___width 4
+#define reg_marb_rw_ext_slots_offset 256
+
+#define STRIDE_marb_rw_regs_slots 4
+/* Register rw_regs_slots, scope marb, type rw */
+#define reg_marb_rw_regs_slots___owner___lsb 0
+#define reg_marb_rw_regs_slots___owner___width 4
+#define reg_marb_rw_regs_slots_offset 512
+
+/* Register rw_intr_mask, scope marb, type rw */
+#define reg_marb_rw_intr_mask___bp0___lsb 0
+#define reg_marb_rw_intr_mask___bp0___width 1
+#define reg_marb_rw_intr_mask___bp0___bit 0
+#define reg_marb_rw_intr_mask___bp1___lsb 1
+#define reg_marb_rw_intr_mask___bp1___width 1
+#define reg_marb_rw_intr_mask___bp1___bit 1
+#define reg_marb_rw_intr_mask___bp2___lsb 2
+#define reg_marb_rw_intr_mask___bp2___width 1
+#define reg_marb_rw_intr_mask___bp2___bit 2
+#define reg_marb_rw_intr_mask___bp3___lsb 3
+#define reg_marb_rw_intr_mask___bp3___width 1
+#define reg_marb_rw_intr_mask___bp3___bit 3
+#define reg_marb_rw_intr_mask_offset 528
+
+/* Register rw_ack_intr, scope marb, type rw */
+#define reg_marb_rw_ack_intr___bp0___lsb 0
+#define reg_marb_rw_ack_intr___bp0___width 1
+#define reg_marb_rw_ack_intr___bp0___bit 0
+#define reg_marb_rw_ack_intr___bp1___lsb 1
+#define reg_marb_rw_ack_intr___bp1___width 1
+#define reg_marb_rw_ack_intr___bp1___bit 1
+#define reg_marb_rw_ack_intr___bp2___lsb 2
+#define reg_marb_rw_ack_intr___bp2___width 1
+#define reg_marb_rw_ack_intr___bp2___bit 2
+#define reg_marb_rw_ack_intr___bp3___lsb 3
+#define reg_marb_rw_ack_intr___bp3___width 1
+#define reg_marb_rw_ack_intr___bp3___bit 3
+#define reg_marb_rw_ack_intr_offset 532
+
+/* Register r_intr, scope marb, type r */
+#define reg_marb_r_intr___bp0___lsb 0
+#define reg_marb_r_intr___bp0___width 1
+#define reg_marb_r_intr___bp0___bit 0
+#define reg_marb_r_intr___bp1___lsb 1
+#define reg_marb_r_intr___bp1___width 1
+#define reg_marb_r_intr___bp1___bit 1
+#define reg_marb_r_intr___bp2___lsb 2
+#define reg_marb_r_intr___bp2___width 1
+#define reg_marb_r_intr___bp2___bit 2
+#define reg_marb_r_intr___bp3___lsb 3
+#define reg_marb_r_intr___bp3___width 1
+#define reg_marb_r_intr___bp3___bit 3
+#define reg_marb_r_intr_offset 536
+
+/* Register r_masked_intr, scope marb, type r */
+#define reg_marb_r_masked_intr___bp0___lsb 0
+#define reg_marb_r_masked_intr___bp0___width 1
+#define reg_marb_r_masked_intr___bp0___bit 0
+#define reg_marb_r_masked_intr___bp1___lsb 1
+#define reg_marb_r_masked_intr___bp1___width 1
+#define reg_marb_r_masked_intr___bp1___bit 1
+#define reg_marb_r_masked_intr___bp2___lsb 2
+#define reg_marb_r_masked_intr___bp2___width 1
+#define reg_marb_r_masked_intr___bp2___bit 2
+#define reg_marb_r_masked_intr___bp3___lsb 3
+#define reg_marb_r_masked_intr___bp3___width 1
+#define reg_marb_r_masked_intr___bp3___bit 3
+#define reg_marb_r_masked_intr_offset 540
+
+/* Register rw_stop_mask, scope marb, type rw */
+#define reg_marb_rw_stop_mask___dma0___lsb 0
+#define reg_marb_rw_stop_mask___dma0___width 1
+#define reg_marb_rw_stop_mask___dma0___bit 0
+#define reg_marb_rw_stop_mask___dma1___lsb 1
+#define reg_marb_rw_stop_mask___dma1___width 1
+#define reg_marb_rw_stop_mask___dma1___bit 1
+#define reg_marb_rw_stop_mask___dma2___lsb 2
+#define reg_marb_rw_stop_mask___dma2___width 1
+#define reg_marb_rw_stop_mask___dma2___bit 2
+#define reg_marb_rw_stop_mask___dma3___lsb 3
+#define reg_marb_rw_stop_mask___dma3___width 1
+#define reg_marb_rw_stop_mask___dma3___bit 3
+#define reg_marb_rw_stop_mask___dma4___lsb 4
+#define reg_marb_rw_stop_mask___dma4___width 1
+#define reg_marb_rw_stop_mask___dma4___bit 4
+#define reg_marb_rw_stop_mask___dma5___lsb 5
+#define reg_marb_rw_stop_mask___dma5___width 1
+#define reg_marb_rw_stop_mask___dma5___bit 5
+#define reg_marb_rw_stop_mask___dma6___lsb 6
+#define reg_marb_rw_stop_mask___dma6___width 1
+#define reg_marb_rw_stop_mask___dma6___bit 6
+#define reg_marb_rw_stop_mask___dma7___lsb 7
+#define reg_marb_rw_stop_mask___dma7___width 1
+#define reg_marb_rw_stop_mask___dma7___bit 7
+#define reg_marb_rw_stop_mask___dma8___lsb 8
+#define reg_marb_rw_stop_mask___dma8___width 1
+#define reg_marb_rw_stop_mask___dma8___bit 8
+#define reg_marb_rw_stop_mask___dma9___lsb 9
+#define reg_marb_rw_stop_mask___dma9___width 1
+#define reg_marb_rw_stop_mask___dma9___bit 9
+#define reg_marb_rw_stop_mask___cpui___lsb 10
+#define reg_marb_rw_stop_mask___cpui___width 1
+#define reg_marb_rw_stop_mask___cpui___bit 10
+#define reg_marb_rw_stop_mask___cpud___lsb 11
+#define reg_marb_rw_stop_mask___cpud___width 1
+#define reg_marb_rw_stop_mask___cpud___bit 11
+#define reg_marb_rw_stop_mask___iop___lsb 12
+#define reg_marb_rw_stop_mask___iop___width 1
+#define reg_marb_rw_stop_mask___iop___bit 12
+#define reg_marb_rw_stop_mask___slave___lsb 13
+#define reg_marb_rw_stop_mask___slave___width 1
+#define reg_marb_rw_stop_mask___slave___bit 13
+#define reg_marb_rw_stop_mask_offset 544
+
+/* Register r_stopped, scope marb, type r */
+#define reg_marb_r_stopped___dma0___lsb 0
+#define reg_marb_r_stopped___dma0___width 1
+#define reg_marb_r_stopped___dma0___bit 0
+#define reg_marb_r_stopped___dma1___lsb 1
+#define reg_marb_r_stopped___dma1___width 1
+#define reg_marb_r_stopped___dma1___bit 1
+#define reg_marb_r_stopped___dma2___lsb 2
+#define reg_marb_r_stopped___dma2___width 1
+#define reg_marb_r_stopped___dma2___bit 2
+#define reg_marb_r_stopped___dma3___lsb 3
+#define reg_marb_r_stopped___dma3___width 1
+#define reg_marb_r_stopped___dma3___bit 3
+#define reg_marb_r_stopped___dma4___lsb 4
+#define reg_marb_r_stopped___dma4___width 1
+#define reg_marb_r_stopped___dma4___bit 4
+#define reg_marb_r_stopped___dma5___lsb 5
+#define reg_marb_r_stopped___dma5___width 1
+#define reg_marb_r_stopped___dma5___bit 5
+#define reg_marb_r_stopped___dma6___lsb 6
+#define reg_marb_r_stopped___dma6___width 1
+#define reg_marb_r_stopped___dma6___bit 6
+#define reg_marb_r_stopped___dma7___lsb 7
+#define reg_marb_r_stopped___dma7___width 1
+#define reg_marb_r_stopped___dma7___bit 7
+#define reg_marb_r_stopped___dma8___lsb 8
+#define reg_marb_r_stopped___dma8___width 1
+#define reg_marb_r_stopped___dma8___bit 8
+#define reg_marb_r_stopped___dma9___lsb 9
+#define reg_marb_r_stopped___dma9___width 1
+#define reg_marb_r_stopped___dma9___bit 9
+#define reg_marb_r_stopped___cpui___lsb 10
+#define reg_marb_r_stopped___cpui___width 1
+#define reg_marb_r_stopped___cpui___bit 10
+#define reg_marb_r_stopped___cpud___lsb 11
+#define reg_marb_r_stopped___cpud___width 1
+#define reg_marb_r_stopped___cpud___bit 11
+#define reg_marb_r_stopped___iop___lsb 12
+#define reg_marb_r_stopped___iop___width 1
+#define reg_marb_r_stopped___iop___bit 12
+#define reg_marb_r_stopped___slave___lsb 13
+#define reg_marb_r_stopped___slave___width 1
+#define reg_marb_r_stopped___slave___bit 13
+#define reg_marb_r_stopped_offset 548
+
+/* Register rw_no_snoop, scope marb, type rw */
+#define reg_marb_rw_no_snoop___dma0___lsb 0
+#define reg_marb_rw_no_snoop___dma0___width 1
+#define reg_marb_rw_no_snoop___dma0___bit 0
+#define reg_marb_rw_no_snoop___dma1___lsb 1
+#define reg_marb_rw_no_snoop___dma1___width 1
+#define reg_marb_rw_no_snoop___dma1___bit 1
+#define reg_marb_rw_no_snoop___dma2___lsb 2
+#define reg_marb_rw_no_snoop___dma2___width 1
+#define reg_marb_rw_no_snoop___dma2___bit 2
+#define reg_marb_rw_no_snoop___dma3___lsb 3
+#define reg_marb_rw_no_snoop___dma3___width 1
+#define reg_marb_rw_no_snoop___dma3___bit 3
+#define reg_marb_rw_no_snoop___dma4___lsb 4
+#define reg_marb_rw_no_snoop___dma4___width 1
+#define reg_marb_rw_no_snoop___dma4___bit 4
+#define reg_marb_rw_no_snoop___dma5___lsb 5
+#define reg_marb_rw_no_snoop___dma5___width 1
+#define reg_marb_rw_no_snoop___dma5___bit 5
+#define reg_marb_rw_no_snoop___dma6___lsb 6
+#define reg_marb_rw_no_snoop___dma6___width 1
+#define reg_marb_rw_no_snoop___dma6___bit 6
+#define reg_marb_rw_no_snoop___dma7___lsb 7
+#define reg_marb_rw_no_snoop___dma7___width 1
+#define reg_marb_rw_no_snoop___dma7___bit 7
+#define reg_marb_rw_no_snoop___dma8___lsb 8
+#define reg_marb_rw_no_snoop___dma8___width 1
+#define reg_marb_rw_no_snoop___dma8___bit 8
+#define reg_marb_rw_no_snoop___dma9___lsb 9
+#define reg_marb_rw_no_snoop___dma9___width 1
+#define reg_marb_rw_no_snoop___dma9___bit 9
+#define reg_marb_rw_no_snoop___cpui___lsb 10
+#define reg_marb_rw_no_snoop___cpui___width 1
+#define reg_marb_rw_no_snoop___cpui___bit 10
+#define reg_marb_rw_no_snoop___cpud___lsb 11
+#define reg_marb_rw_no_snoop___cpud___width 1
+#define reg_marb_rw_no_snoop___cpud___bit 11
+#define reg_marb_rw_no_snoop___iop___lsb 12
+#define reg_marb_rw_no_snoop___iop___width 1
+#define reg_marb_rw_no_snoop___iop___bit 12
+#define reg_marb_rw_no_snoop___slave___lsb 13
+#define reg_marb_rw_no_snoop___slave___width 1
+#define reg_marb_rw_no_snoop___slave___bit 13
+#define reg_marb_rw_no_snoop_offset 832
+
+/* Register rw_no_snoop_rq, scope marb, type rw */
+#define reg_marb_rw_no_snoop_rq___cpui___lsb 10
+#define reg_marb_rw_no_snoop_rq___cpui___width 1
+#define reg_marb_rw_no_snoop_rq___cpui___bit 10
+#define reg_marb_rw_no_snoop_rq___cpud___lsb 11
+#define reg_marb_rw_no_snoop_rq___cpud___width 1
+#define reg_marb_rw_no_snoop_rq___cpud___bit 11
+#define reg_marb_rw_no_snoop_rq_offset 836
+
+
+/* Constants */
+#define regk_marb_cpud                            0x0000000b
+#define regk_marb_cpui                            0x0000000a
+#define regk_marb_dma0                            0x00000000
+#define regk_marb_dma1                            0x00000001
+#define regk_marb_dma2                            0x00000002
+#define regk_marb_dma3                            0x00000003
+#define regk_marb_dma4                            0x00000004
+#define regk_marb_dma5                            0x00000005
+#define regk_marb_dma6                            0x00000006
+#define regk_marb_dma7                            0x00000007
+#define regk_marb_dma8                            0x00000008
+#define regk_marb_dma9                            0x00000009
+#define regk_marb_iop                             0x0000000c
+#define regk_marb_no                              0x00000000
+#define regk_marb_r_stopped_default               0x00000000
+#define regk_marb_rw_ext_slots_default            0x00000000
+#define regk_marb_rw_ext_slots_size               0x00000040
+#define regk_marb_rw_int_slots_default            0x00000000
+#define regk_marb_rw_int_slots_size               0x00000040
+#define regk_marb_rw_intr_mask_default            0x00000000
+#define regk_marb_rw_no_snoop_default             0x00000000
+#define regk_marb_rw_no_snoop_rq_default          0x00000000
+#define regk_marb_rw_regs_slots_default           0x00000000
+#define regk_marb_rw_regs_slots_size              0x00000004
+#define regk_marb_rw_stop_mask_default            0x00000000
+#define regk_marb_slave                           0x0000000d
+#define regk_marb_yes                             0x00000001
+#endif /* __marb_defs_asm_h */
+#ifndef __marb_bp_defs_asm_h
+#define __marb_bp_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/memarb/rtl/guinness/marb_top.r
+ *     id:           <not found>
+ *     last modfied: Mon Apr 11 16:12:16 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r
+ *      id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_first_addr, scope marb_bp, type rw */
+#define reg_marb_bp_rw_first_addr_offset 0
+
+/* Register rw_last_addr, scope marb_bp, type rw */
+#define reg_marb_bp_rw_last_addr_offset 4
+
+/* Register rw_op, scope marb_bp, type rw */
+#define reg_marb_bp_rw_op___rd___lsb 0
+#define reg_marb_bp_rw_op___rd___width 1
+#define reg_marb_bp_rw_op___rd___bit 0
+#define reg_marb_bp_rw_op___wr___lsb 1
+#define reg_marb_bp_rw_op___wr___width 1
+#define reg_marb_bp_rw_op___wr___bit 1
+#define reg_marb_bp_rw_op___rd_excl___lsb 2
+#define reg_marb_bp_rw_op___rd_excl___width 1
+#define reg_marb_bp_rw_op___rd_excl___bit 2
+#define reg_marb_bp_rw_op___pri_wr___lsb 3
+#define reg_marb_bp_rw_op___pri_wr___width 1
+#define reg_marb_bp_rw_op___pri_wr___bit 3
+#define reg_marb_bp_rw_op___us_rd___lsb 4
+#define reg_marb_bp_rw_op___us_rd___width 1
+#define reg_marb_bp_rw_op___us_rd___bit 4
+#define reg_marb_bp_rw_op___us_wr___lsb 5
+#define reg_marb_bp_rw_op___us_wr___width 1
+#define reg_marb_bp_rw_op___us_wr___bit 5
+#define reg_marb_bp_rw_op___us_rd_excl___lsb 6
+#define reg_marb_bp_rw_op___us_rd_excl___width 1
+#define reg_marb_bp_rw_op___us_rd_excl___bit 6
+#define reg_marb_bp_rw_op___us_pri_wr___lsb 7
+#define reg_marb_bp_rw_op___us_pri_wr___width 1
+#define reg_marb_bp_rw_op___us_pri_wr___bit 7
+#define reg_marb_bp_rw_op_offset 8
+
+/* Register rw_clients, scope marb_bp, type rw */
+#define reg_marb_bp_rw_clients___dma0___lsb 0
+#define reg_marb_bp_rw_clients___dma0___width 1
+#define reg_marb_bp_rw_clients___dma0___bit 0
+#define reg_marb_bp_rw_clients___dma1___lsb 1
+#define reg_marb_bp_rw_clients___dma1___width 1
+#define reg_marb_bp_rw_clients___dma1___bit 1
+#define reg_marb_bp_rw_clients___dma2___lsb 2
+#define reg_marb_bp_rw_clients___dma2___width 1
+#define reg_marb_bp_rw_clients___dma2___bit 2
+#define reg_marb_bp_rw_clients___dma3___lsb 3
+#define reg_marb_bp_rw_clients___dma3___width 1
+#define reg_marb_bp_rw_clients___dma3___bit 3
+#define reg_marb_bp_rw_clients___dma4___lsb 4
+#define reg_marb_bp_rw_clients___dma4___width 1
+#define reg_marb_bp_rw_clients___dma4___bit 4
+#define reg_marb_bp_rw_clients___dma5___lsb 5
+#define reg_marb_bp_rw_clients___dma5___width 1
+#define reg_marb_bp_rw_clients___dma5___bit 5
+#define reg_marb_bp_rw_clients___dma6___lsb 6
+#define reg_marb_bp_rw_clients___dma6___width 1
+#define reg_marb_bp_rw_clients___dma6___bit 6
+#define reg_marb_bp_rw_clients___dma7___lsb 7
+#define reg_marb_bp_rw_clients___dma7___width 1
+#define reg_marb_bp_rw_clients___dma7___bit 7
+#define reg_marb_bp_rw_clients___dma8___lsb 8
+#define reg_marb_bp_rw_clients___dma8___width 1
+#define reg_marb_bp_rw_clients___dma8___bit 8
+#define reg_marb_bp_rw_clients___dma9___lsb 9
+#define reg_marb_bp_rw_clients___dma9___width 1
+#define reg_marb_bp_rw_clients___dma9___bit 9
+#define reg_marb_bp_rw_clients___cpui___lsb 10
+#define reg_marb_bp_rw_clients___cpui___width 1
+#define reg_marb_bp_rw_clients___cpui___bit 10
+#define reg_marb_bp_rw_clients___cpud___lsb 11
+#define reg_marb_bp_rw_clients___cpud___width 1
+#define reg_marb_bp_rw_clients___cpud___bit 11
+#define reg_marb_bp_rw_clients___iop___lsb 12
+#define reg_marb_bp_rw_clients___iop___width 1
+#define reg_marb_bp_rw_clients___iop___bit 12
+#define reg_marb_bp_rw_clients___slave___lsb 13
+#define reg_marb_bp_rw_clients___slave___width 1
+#define reg_marb_bp_rw_clients___slave___bit 13
+#define reg_marb_bp_rw_clients_offset 12
+
+/* Register rw_options, scope marb_bp, type rw */
+#define reg_marb_bp_rw_options___wrap___lsb 0
+#define reg_marb_bp_rw_options___wrap___width 1
+#define reg_marb_bp_rw_options___wrap___bit 0
+#define reg_marb_bp_rw_options_offset 16
+
+/* Register r_brk_addr, scope marb_bp, type r */
+#define reg_marb_bp_r_brk_addr_offset 20
+
+/* Register r_brk_op, scope marb_bp, type r */
+#define reg_marb_bp_r_brk_op___rd___lsb 0
+#define reg_marb_bp_r_brk_op___rd___width 1
+#define reg_marb_bp_r_brk_op___rd___bit 0
+#define reg_marb_bp_r_brk_op___wr___lsb 1
+#define reg_marb_bp_r_brk_op___wr___width 1
+#define reg_marb_bp_r_brk_op___wr___bit 1
+#define reg_marb_bp_r_brk_op___rd_excl___lsb 2
+#define reg_marb_bp_r_brk_op___rd_excl___width 1
+#define reg_marb_bp_r_brk_op___rd_excl___bit 2
+#define reg_marb_bp_r_brk_op___pri_wr___lsb 3
+#define reg_marb_bp_r_brk_op___pri_wr___width 1
+#define reg_marb_bp_r_brk_op___pri_wr___bit 3
+#define reg_marb_bp_r_brk_op___us_rd___lsb 4
+#define reg_marb_bp_r_brk_op___us_rd___width 1
+#define reg_marb_bp_r_brk_op___us_rd___bit 4
+#define reg_marb_bp_r_brk_op___us_wr___lsb 5
+#define reg_marb_bp_r_brk_op___us_wr___width 1
+#define reg_marb_bp_r_brk_op___us_wr___bit 5
+#define reg_marb_bp_r_brk_op___us_rd_excl___lsb 6
+#define reg_marb_bp_r_brk_op___us_rd_excl___width 1
+#define reg_marb_bp_r_brk_op___us_rd_excl___bit 6
+#define reg_marb_bp_r_brk_op___us_pri_wr___lsb 7
+#define reg_marb_bp_r_brk_op___us_pri_wr___width 1
+#define reg_marb_bp_r_brk_op___us_pri_wr___bit 7
+#define reg_marb_bp_r_brk_op_offset 24
+
+/* Register r_brk_clients, scope marb_bp, type r */
+#define reg_marb_bp_r_brk_clients___dma0___lsb 0
+#define reg_marb_bp_r_brk_clients___dma0___width 1
+#define reg_marb_bp_r_brk_clients___dma0___bit 0
+#define reg_marb_bp_r_brk_clients___dma1___lsb 1
+#define reg_marb_bp_r_brk_clients___dma1___width 1
+#define reg_marb_bp_r_brk_clients___dma1___bit 1
+#define reg_marb_bp_r_brk_clients___dma2___lsb 2
+#define reg_marb_bp_r_brk_clients___dma2___width 1
+#define reg_marb_bp_r_brk_clients___dma2___bit 2
+#define reg_marb_bp_r_brk_clients___dma3___lsb 3
+#define reg_marb_bp_r_brk_clients___dma3___width 1
+#define reg_marb_bp_r_brk_clients___dma3___bit 3
+#define reg_marb_bp_r_brk_clients___dma4___lsb 4
+#define reg_marb_bp_r_brk_clients___dma4___width 1
+#define reg_marb_bp_r_brk_clients___dma4___bit 4
+#define reg_marb_bp_r_brk_clients___dma5___lsb 5
+#define reg_marb_bp_r_brk_clients___dma5___width 1
+#define reg_marb_bp_r_brk_clients___dma5___bit 5
+#define reg_marb_bp_r_brk_clients___dma6___lsb 6
+#define reg_marb_bp_r_brk_clients___dma6___width 1
+#define reg_marb_bp_r_brk_clients___dma6___bit 6
+#define reg_marb_bp_r_brk_clients___dma7___lsb 7
+#define reg_marb_bp_r_brk_clients___dma7___width 1
+#define reg_marb_bp_r_brk_clients___dma7___bit 7
+#define reg_marb_bp_r_brk_clients___dma8___lsb 8
+#define reg_marb_bp_r_brk_clients___dma8___width 1
+#define reg_marb_bp_r_brk_clients___dma8___bit 8
+#define reg_marb_bp_r_brk_clients___dma9___lsb 9
+#define reg_marb_bp_r_brk_clients___dma9___width 1
+#define reg_marb_bp_r_brk_clients___dma9___bit 9
+#define reg_marb_bp_r_brk_clients___cpui___lsb 10
+#define reg_marb_bp_r_brk_clients___cpui___width 1
+#define reg_marb_bp_r_brk_clients___cpui___bit 10
+#define reg_marb_bp_r_brk_clients___cpud___lsb 11
+#define reg_marb_bp_r_brk_clients___cpud___width 1
+#define reg_marb_bp_r_brk_clients___cpud___bit 11
+#define reg_marb_bp_r_brk_clients___iop___lsb 12
+#define reg_marb_bp_r_brk_clients___iop___width 1
+#define reg_marb_bp_r_brk_clients___iop___bit 12
+#define reg_marb_bp_r_brk_clients___slave___lsb 13
+#define reg_marb_bp_r_brk_clients___slave___width 1
+#define reg_marb_bp_r_brk_clients___slave___bit 13
+#define reg_marb_bp_r_brk_clients_offset 28
+
+/* Register r_brk_first_client, scope marb_bp, type r */
+#define reg_marb_bp_r_brk_first_client___dma0___lsb 0
+#define reg_marb_bp_r_brk_first_client___dma0___width 1
+#define reg_marb_bp_r_brk_first_client___dma0___bit 0
+#define reg_marb_bp_r_brk_first_client___dma1___lsb 1
+#define reg_marb_bp_r_brk_first_client___dma1___width 1
+#define reg_marb_bp_r_brk_first_client___dma1___bit 1
+#define reg_marb_bp_r_brk_first_client___dma2___lsb 2
+#define reg_marb_bp_r_brk_first_client___dma2___width 1
+#define reg_marb_bp_r_brk_first_client___dma2___bit 2
+#define reg_marb_bp_r_brk_first_client___dma3___lsb 3
+#define reg_marb_bp_r_brk_first_client___dma3___width 1
+#define reg_marb_bp_r_brk_first_client___dma3___bit 3
+#define reg_marb_bp_r_brk_first_client___dma4___lsb 4
+#define reg_marb_bp_r_brk_first_client___dma4___width 1
+#define reg_marb_bp_r_brk_first_client___dma4___bit 4
+#define reg_marb_bp_r_brk_first_client___dma5___lsb 5
+#define reg_marb_bp_r_brk_first_client___dma5___width 1
+#define reg_marb_bp_r_brk_first_client___dma5___bit 5
+#define reg_marb_bp_r_brk_first_client___dma6___lsb 6
+#define reg_marb_bp_r_brk_first_client___dma6___width 1
+#define reg_marb_bp_r_brk_first_client___dma6___bit 6
+#define reg_marb_bp_r_brk_first_client___dma7___lsb 7
+#define reg_marb_bp_r_brk_first_client___dma7___width 1
+#define reg_marb_bp_r_brk_first_client___dma7___bit 7
+#define reg_marb_bp_r_brk_first_client___dma8___lsb 8
+#define reg_marb_bp_r_brk_first_client___dma8___width 1
+#define reg_marb_bp_r_brk_first_client___dma8___bit 8
+#define reg_marb_bp_r_brk_first_client___dma9___lsb 9
+#define reg_marb_bp_r_brk_first_client___dma9___width 1
+#define reg_marb_bp_r_brk_first_client___dma9___bit 9
+#define reg_marb_bp_r_brk_first_client___cpui___lsb 10
+#define reg_marb_bp_r_brk_first_client___cpui___width 1
+#define reg_marb_bp_r_brk_first_client___cpui___bit 10
+#define reg_marb_bp_r_brk_first_client___cpud___lsb 11
+#define reg_marb_bp_r_brk_first_client___cpud___width 1
+#define reg_marb_bp_r_brk_first_client___cpud___bit 11
+#define reg_marb_bp_r_brk_first_client___iop___lsb 12
+#define reg_marb_bp_r_brk_first_client___iop___width 1
+#define reg_marb_bp_r_brk_first_client___iop___bit 12
+#define reg_marb_bp_r_brk_first_client___slave___lsb 13
+#define reg_marb_bp_r_brk_first_client___slave___width 1
+#define reg_marb_bp_r_brk_first_client___slave___bit 13
+#define reg_marb_bp_r_brk_first_client_offset 32
+
+/* Register r_brk_size, scope marb_bp, type r */
+#define reg_marb_bp_r_brk_size_offset 36
+
+/* Register rw_ack, scope marb_bp, type rw */
+#define reg_marb_bp_rw_ack_offset 40
+
+
+/* Constants */
+#define regk_marb_bp_no                           0x00000000
+#define regk_marb_bp_rw_op_default                0x00000000
+#define regk_marb_bp_rw_options_default           0x00000000
+#define regk_marb_bp_yes                          0x00000001
+#endif /* __marb_bp_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h

@@ -0,0 +1,212 @@
+#ifndef __mmu_defs_asm_h
+#define __mmu_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/mmu/doc/mmu_regs.r
+ *     id:           mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp
+ *     last modfied: Mon Apr 11 17:03:20 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/mmu_defs_asm.h ../../inst/mmu/doc/mmu_regs.r
+ *      id: $Id: mmu_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_mm_cfg, scope mmu, type rw */
+#define reg_mmu_rw_mm_cfg___seg_0___lsb 0
+#define reg_mmu_rw_mm_cfg___seg_0___width 1
+#define reg_mmu_rw_mm_cfg___seg_0___bit 0
+#define reg_mmu_rw_mm_cfg___seg_1___lsb 1
+#define reg_mmu_rw_mm_cfg___seg_1___width 1
+#define reg_mmu_rw_mm_cfg___seg_1___bit 1
+#define reg_mmu_rw_mm_cfg___seg_2___lsb 2
+#define reg_mmu_rw_mm_cfg___seg_2___width 1
+#define reg_mmu_rw_mm_cfg___seg_2___bit 2
+#define reg_mmu_rw_mm_cfg___seg_3___lsb 3
+#define reg_mmu_rw_mm_cfg___seg_3___width 1
+#define reg_mmu_rw_mm_cfg___seg_3___bit 3
+#define reg_mmu_rw_mm_cfg___seg_4___lsb 4
+#define reg_mmu_rw_mm_cfg___seg_4___width 1
+#define reg_mmu_rw_mm_cfg___seg_4___bit 4
+#define reg_mmu_rw_mm_cfg___seg_5___lsb 5
+#define reg_mmu_rw_mm_cfg___seg_5___width 1
+#define reg_mmu_rw_mm_cfg___seg_5___bit 5
+#define reg_mmu_rw_mm_cfg___seg_6___lsb 6
+#define reg_mmu_rw_mm_cfg___seg_6___width 1
+#define reg_mmu_rw_mm_cfg___seg_6___bit 6
+#define reg_mmu_rw_mm_cfg___seg_7___lsb 7
+#define reg_mmu_rw_mm_cfg___seg_7___width 1
+#define reg_mmu_rw_mm_cfg___seg_7___bit 7
+#define reg_mmu_rw_mm_cfg___seg_8___lsb 8
+#define reg_mmu_rw_mm_cfg___seg_8___width 1
+#define reg_mmu_rw_mm_cfg___seg_8___bit 8
+#define reg_mmu_rw_mm_cfg___seg_9___lsb 9
+#define reg_mmu_rw_mm_cfg___seg_9___width 1
+#define reg_mmu_rw_mm_cfg___seg_9___bit 9
+#define reg_mmu_rw_mm_cfg___seg_a___lsb 10
+#define reg_mmu_rw_mm_cfg___seg_a___width 1
+#define reg_mmu_rw_mm_cfg___seg_a___bit 10
+#define reg_mmu_rw_mm_cfg___seg_b___lsb 11
+#define reg_mmu_rw_mm_cfg___seg_b___width 1
+#define reg_mmu_rw_mm_cfg___seg_b___bit 11
+#define reg_mmu_rw_mm_cfg___seg_c___lsb 12
+#define reg_mmu_rw_mm_cfg___seg_c___width 1
+#define reg_mmu_rw_mm_cfg___seg_c___bit 12
+#define reg_mmu_rw_mm_cfg___seg_d___lsb 13
+#define reg_mmu_rw_mm_cfg___seg_d___width 1
+#define reg_mmu_rw_mm_cfg___seg_d___bit 13
+#define reg_mmu_rw_mm_cfg___seg_e___lsb 14
+#define reg_mmu_rw_mm_cfg___seg_e___width 1
+#define reg_mmu_rw_mm_cfg___seg_e___bit 14
+#define reg_mmu_rw_mm_cfg___seg_f___lsb 15
+#define reg_mmu_rw_mm_cfg___seg_f___width 1
+#define reg_mmu_rw_mm_cfg___seg_f___bit 15
+#define reg_mmu_rw_mm_cfg___inv___lsb 16
+#define reg_mmu_rw_mm_cfg___inv___width 1
+#define reg_mmu_rw_mm_cfg___inv___bit 16
+#define reg_mmu_rw_mm_cfg___ex___lsb 17
+#define reg_mmu_rw_mm_cfg___ex___width 1
+#define reg_mmu_rw_mm_cfg___ex___bit 17
+#define reg_mmu_rw_mm_cfg___acc___lsb 18
+#define reg_mmu_rw_mm_cfg___acc___width 1
+#define reg_mmu_rw_mm_cfg___acc___bit 18
+#define reg_mmu_rw_mm_cfg___we___lsb 19
+#define reg_mmu_rw_mm_cfg___we___width 1
+#define reg_mmu_rw_mm_cfg___we___bit 19
+#define reg_mmu_rw_mm_cfg_offset 0
+
+/* Register rw_mm_kbase_lo, scope mmu, type rw */
+#define reg_mmu_rw_mm_kbase_lo___base_0___lsb 0
+#define reg_mmu_rw_mm_kbase_lo___base_0___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_1___lsb 4
+#define reg_mmu_rw_mm_kbase_lo___base_1___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_2___lsb 8
+#define reg_mmu_rw_mm_kbase_lo___base_2___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_3___lsb 12
+#define reg_mmu_rw_mm_kbase_lo___base_3___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_4___lsb 16
+#define reg_mmu_rw_mm_kbase_lo___base_4___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_5___lsb 20
+#define reg_mmu_rw_mm_kbase_lo___base_5___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_6___lsb 24
+#define reg_mmu_rw_mm_kbase_lo___base_6___width 4
+#define reg_mmu_rw_mm_kbase_lo___base_7___lsb 28
+#define reg_mmu_rw_mm_kbase_lo___base_7___width 4
+#define reg_mmu_rw_mm_kbase_lo_offset 4
+
+/* Register rw_mm_kbase_hi, scope mmu, type rw */
+#define reg_mmu_rw_mm_kbase_hi___base_8___lsb 0
+#define reg_mmu_rw_mm_kbase_hi___base_8___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_9___lsb 4
+#define reg_mmu_rw_mm_kbase_hi___base_9___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_a___lsb 8
+#define reg_mmu_rw_mm_kbase_hi___base_a___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_b___lsb 12
+#define reg_mmu_rw_mm_kbase_hi___base_b___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_c___lsb 16
+#define reg_mmu_rw_mm_kbase_hi___base_c___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_d___lsb 20
+#define reg_mmu_rw_mm_kbase_hi___base_d___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_e___lsb 24
+#define reg_mmu_rw_mm_kbase_hi___base_e___width 4
+#define reg_mmu_rw_mm_kbase_hi___base_f___lsb 28
+#define reg_mmu_rw_mm_kbase_hi___base_f___width 4
+#define reg_mmu_rw_mm_kbase_hi_offset 8
+
+/* Register r_mm_cause, scope mmu, type r */
+#define reg_mmu_r_mm_cause___pid___lsb 0
+#define reg_mmu_r_mm_cause___pid___width 8
+#define reg_mmu_r_mm_cause___op___lsb 8
+#define reg_mmu_r_mm_cause___op___width 2
+#define reg_mmu_r_mm_cause___vpn___lsb 13
+#define reg_mmu_r_mm_cause___vpn___width 19
+#define reg_mmu_r_mm_cause_offset 12
+
+/* Register rw_mm_tlb_sel, scope mmu, type rw */
+#define reg_mmu_rw_mm_tlb_sel___idx___lsb 0
+#define reg_mmu_rw_mm_tlb_sel___idx___width 4
+#define reg_mmu_rw_mm_tlb_sel___set___lsb 4
+#define reg_mmu_rw_mm_tlb_sel___set___width 2
+#define reg_mmu_rw_mm_tlb_sel_offset 16
+
+/* Register rw_mm_tlb_lo, scope mmu, type rw */
+#define reg_mmu_rw_mm_tlb_lo___x___lsb 0
+#define reg_mmu_rw_mm_tlb_lo___x___width 1
+#define reg_mmu_rw_mm_tlb_lo___x___bit 0
+#define reg_mmu_rw_mm_tlb_lo___w___lsb 1
+#define reg_mmu_rw_mm_tlb_lo___w___width 1
+#define reg_mmu_rw_mm_tlb_lo___w___bit 1
+#define reg_mmu_rw_mm_tlb_lo___k___lsb 2
+#define reg_mmu_rw_mm_tlb_lo___k___width 1
+#define reg_mmu_rw_mm_tlb_lo___k___bit 2
+#define reg_mmu_rw_mm_tlb_lo___v___lsb 3
+#define reg_mmu_rw_mm_tlb_lo___v___width 1
+#define reg_mmu_rw_mm_tlb_lo___v___bit 3
+#define reg_mmu_rw_mm_tlb_lo___g___lsb 4
+#define reg_mmu_rw_mm_tlb_lo___g___width 1
+#define reg_mmu_rw_mm_tlb_lo___g___bit 4
+#define reg_mmu_rw_mm_tlb_lo___pfn___lsb 13
+#define reg_mmu_rw_mm_tlb_lo___pfn___width 19
+#define reg_mmu_rw_mm_tlb_lo_offset 20
+
+/* Register rw_mm_tlb_hi, scope mmu, type rw */
+#define reg_mmu_rw_mm_tlb_hi___pid___lsb 0
+#define reg_mmu_rw_mm_tlb_hi___pid___width 8
+#define reg_mmu_rw_mm_tlb_hi___vpn___lsb 13
+#define reg_mmu_rw_mm_tlb_hi___vpn___width 19
+#define reg_mmu_rw_mm_tlb_hi_offset 24
+
+
+/* Constants */
+#define regk_mmu_execute                          0x00000000
+#define regk_mmu_flush                            0x00000003
+#define regk_mmu_linear                           0x00000001
+#define regk_mmu_no                               0x00000000
+#define regk_mmu_off                              0x00000000
+#define regk_mmu_on                               0x00000001
+#define regk_mmu_page                             0x00000000
+#define regk_mmu_read                             0x00000001
+#define regk_mmu_write                            0x00000002
+#define regk_mmu_yes                              0x00000001
+#endif /* __mmu_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/mmu_supp_reg.h

@@ -0,0 +1,7 @@
+#define RW_MM_CFG	0
+#define RW_MM_KBASE_LO	1
+#define RW_MM_KBASE_HI	2
+#define R_MM_CAUSE	3
+#define RW_MM_TLB_SEL	4
+#define RW_MM_TLB_LO	5
+#define RW_MM_TLB_HI	6

include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h

@@ -0,0 +1,632 @@
+#ifndef __pinmux_defs_asm_h
+#define __pinmux_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/pinmux/rtl/guinness/pinmux_regs.r
+ *     id:           pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp
+ *     last modfied: Mon Apr 11 16:09:11 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r
+ *      id: $Id: pinmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_pa, scope pinmux, type rw */
+#define reg_pinmux_rw_pa___pa0___lsb 0
+#define reg_pinmux_rw_pa___pa0___width 1
+#define reg_pinmux_rw_pa___pa0___bit 0
+#define reg_pinmux_rw_pa___pa1___lsb 1
+#define reg_pinmux_rw_pa___pa1___width 1
+#define reg_pinmux_rw_pa___pa1___bit 1
+#define reg_pinmux_rw_pa___pa2___lsb 2
+#define reg_pinmux_rw_pa___pa2___width 1
+#define reg_pinmux_rw_pa___pa2___bit 2
+#define reg_pinmux_rw_pa___pa3___lsb 3
+#define reg_pinmux_rw_pa___pa3___width 1
+#define reg_pinmux_rw_pa___pa3___bit 3
+#define reg_pinmux_rw_pa___pa4___lsb 4
+#define reg_pinmux_rw_pa___pa4___width 1
+#define reg_pinmux_rw_pa___pa4___bit 4
+#define reg_pinmux_rw_pa___pa5___lsb 5
+#define reg_pinmux_rw_pa___pa5___width 1
+#define reg_pinmux_rw_pa___pa5___bit 5
+#define reg_pinmux_rw_pa___pa6___lsb 6
+#define reg_pinmux_rw_pa___pa6___width 1
+#define reg_pinmux_rw_pa___pa6___bit 6
+#define reg_pinmux_rw_pa___pa7___lsb 7
+#define reg_pinmux_rw_pa___pa7___width 1
+#define reg_pinmux_rw_pa___pa7___bit 7
+#define reg_pinmux_rw_pa___csp2_n___lsb 8
+#define reg_pinmux_rw_pa___csp2_n___width 1
+#define reg_pinmux_rw_pa___csp2_n___bit 8
+#define reg_pinmux_rw_pa___csp3_n___lsb 9
+#define reg_pinmux_rw_pa___csp3_n___width 1
+#define reg_pinmux_rw_pa___csp3_n___bit 9
+#define reg_pinmux_rw_pa___csp5_n___lsb 10
+#define reg_pinmux_rw_pa___csp5_n___width 1
+#define reg_pinmux_rw_pa___csp5_n___bit 10
+#define reg_pinmux_rw_pa___csp6_n___lsb 11
+#define reg_pinmux_rw_pa___csp6_n___width 1
+#define reg_pinmux_rw_pa___csp6_n___bit 11
+#define reg_pinmux_rw_pa___hsh4___lsb 12
+#define reg_pinmux_rw_pa___hsh4___width 1
+#define reg_pinmux_rw_pa___hsh4___bit 12
+#define reg_pinmux_rw_pa___hsh5___lsb 13
+#define reg_pinmux_rw_pa___hsh5___width 1
+#define reg_pinmux_rw_pa___hsh5___bit 13
+#define reg_pinmux_rw_pa___hsh6___lsb 14
+#define reg_pinmux_rw_pa___hsh6___width 1
+#define reg_pinmux_rw_pa___hsh6___bit 14
+#define reg_pinmux_rw_pa___hsh7___lsb 15
+#define reg_pinmux_rw_pa___hsh7___width 1
+#define reg_pinmux_rw_pa___hsh7___bit 15
+#define reg_pinmux_rw_pa_offset 0
+
+/* Register rw_hwprot, scope pinmux, type rw */
+#define reg_pinmux_rw_hwprot___ser1___lsb 0
+#define reg_pinmux_rw_hwprot___ser1___width 1
+#define reg_pinmux_rw_hwprot___ser1___bit 0
+#define reg_pinmux_rw_hwprot___ser2___lsb 1
+#define reg_pinmux_rw_hwprot___ser2___width 1
+#define reg_pinmux_rw_hwprot___ser2___bit 1
+#define reg_pinmux_rw_hwprot___ser3___lsb 2
+#define reg_pinmux_rw_hwprot___ser3___width 1
+#define reg_pinmux_rw_hwprot___ser3___bit 2
+#define reg_pinmux_rw_hwprot___sser0___lsb 3
+#define reg_pinmux_rw_hwprot___sser0___width 1
+#define reg_pinmux_rw_hwprot___sser0___bit 3
+#define reg_pinmux_rw_hwprot___sser1___lsb 4
+#define reg_pinmux_rw_hwprot___sser1___width 1
+#define reg_pinmux_rw_hwprot___sser1___bit 4
+#define reg_pinmux_rw_hwprot___ata0___lsb 5
+#define reg_pinmux_rw_hwprot___ata0___width 1
+#define reg_pinmux_rw_hwprot___ata0___bit 5
+#define reg_pinmux_rw_hwprot___ata1___lsb 6
+#define reg_pinmux_rw_hwprot___ata1___width 1
+#define reg_pinmux_rw_hwprot___ata1___bit 6
+#define reg_pinmux_rw_hwprot___ata2___lsb 7
+#define reg_pinmux_rw_hwprot___ata2___width 1
+#define reg_pinmux_rw_hwprot___ata2___bit 7
+#define reg_pinmux_rw_hwprot___ata3___lsb 8
+#define reg_pinmux_rw_hwprot___ata3___width 1
+#define reg_pinmux_rw_hwprot___ata3___bit 8
+#define reg_pinmux_rw_hwprot___ata___lsb 9
+#define reg_pinmux_rw_hwprot___ata___width 1
+#define reg_pinmux_rw_hwprot___ata___bit 9
+#define reg_pinmux_rw_hwprot___eth1___lsb 10
+#define reg_pinmux_rw_hwprot___eth1___width 1
+#define reg_pinmux_rw_hwprot___eth1___bit 10
+#define reg_pinmux_rw_hwprot___eth1_mgm___lsb 11
+#define reg_pinmux_rw_hwprot___eth1_mgm___width 1
+#define reg_pinmux_rw_hwprot___eth1_mgm___bit 11
+#define reg_pinmux_rw_hwprot___timer___lsb 12
+#define reg_pinmux_rw_hwprot___timer___width 1
+#define reg_pinmux_rw_hwprot___timer___bit 12
+#define reg_pinmux_rw_hwprot___p21___lsb 13
+#define reg_pinmux_rw_hwprot___p21___width 1
+#define reg_pinmux_rw_hwprot___p21___bit 13
+#define reg_pinmux_rw_hwprot_offset 4
+
+/* Register rw_pb_gio, scope pinmux, type rw */
+#define reg_pinmux_rw_pb_gio___pb0___lsb 0
+#define reg_pinmux_rw_pb_gio___pb0___width 1
+#define reg_pinmux_rw_pb_gio___pb0___bit 0
+#define reg_pinmux_rw_pb_gio___pb1___lsb 1
+#define reg_pinmux_rw_pb_gio___pb1___width 1
+#define reg_pinmux_rw_pb_gio___pb1___bit 1
+#define reg_pinmux_rw_pb_gio___pb2___lsb 2
+#define reg_pinmux_rw_pb_gio___pb2___width 1
+#define reg_pinmux_rw_pb_gio___pb2___bit 2
+#define reg_pinmux_rw_pb_gio___pb3___lsb 3
+#define reg_pinmux_rw_pb_gio___pb3___width 1
+#define reg_pinmux_rw_pb_gio___pb3___bit 3
+#define reg_pinmux_rw_pb_gio___pb4___lsb 4
+#define reg_pinmux_rw_pb_gio___pb4___width 1
+#define reg_pinmux_rw_pb_gio___pb4___bit 4
+#define reg_pinmux_rw_pb_gio___pb5___lsb 5
+#define reg_pinmux_rw_pb_gio___pb5___width 1
+#define reg_pinmux_rw_pb_gio___pb5___bit 5
+#define reg_pinmux_rw_pb_gio___pb6___lsb 6
+#define reg_pinmux_rw_pb_gio___pb6___width 1
+#define reg_pinmux_rw_pb_gio___pb6___bit 6
+#define reg_pinmux_rw_pb_gio___pb7___lsb 7
+#define reg_pinmux_rw_pb_gio___pb7___width 1
+#define reg_pinmux_rw_pb_gio___pb7___bit 7
+#define reg_pinmux_rw_pb_gio___pb8___lsb 8
+#define reg_pinmux_rw_pb_gio___pb8___width 1
+#define reg_pinmux_rw_pb_gio___pb8___bit 8
+#define reg_pinmux_rw_pb_gio___pb9___lsb 9
+#define reg_pinmux_rw_pb_gio___pb9___width 1
+#define reg_pinmux_rw_pb_gio___pb9___bit 9
+#define reg_pinmux_rw_pb_gio___pb10___lsb 10
+#define reg_pinmux_rw_pb_gio___pb10___width 1
+#define reg_pinmux_rw_pb_gio___pb10___bit 10
+#define reg_pinmux_rw_pb_gio___pb11___lsb 11
+#define reg_pinmux_rw_pb_gio___pb11___width 1
+#define reg_pinmux_rw_pb_gio___pb11___bit 11
+#define reg_pinmux_rw_pb_gio___pb12___lsb 12
+#define reg_pinmux_rw_pb_gio___pb12___width 1
+#define reg_pinmux_rw_pb_gio___pb12___bit 12
+#define reg_pinmux_rw_pb_gio___pb13___lsb 13
+#define reg_pinmux_rw_pb_gio___pb13___width 1
+#define reg_pinmux_rw_pb_gio___pb13___bit 13
+#define reg_pinmux_rw_pb_gio___pb14___lsb 14
+#define reg_pinmux_rw_pb_gio___pb14___width 1
+#define reg_pinmux_rw_pb_gio___pb14___bit 14
+#define reg_pinmux_rw_pb_gio___pb15___lsb 15
+#define reg_pinmux_rw_pb_gio___pb15___width 1
+#define reg_pinmux_rw_pb_gio___pb15___bit 15
+#define reg_pinmux_rw_pb_gio___pb16___lsb 16
+#define reg_pinmux_rw_pb_gio___pb16___width 1
+#define reg_pinmux_rw_pb_gio___pb16___bit 16
+#define reg_pinmux_rw_pb_gio___pb17___lsb 17
+#define reg_pinmux_rw_pb_gio___pb17___width 1
+#define reg_pinmux_rw_pb_gio___pb17___bit 17
+#define reg_pinmux_rw_pb_gio_offset 8
+
+/* Register rw_pb_iop, scope pinmux, type rw */
+#define reg_pinmux_rw_pb_iop___pb0___lsb 0
+#define reg_pinmux_rw_pb_iop___pb0___width 1
+#define reg_pinmux_rw_pb_iop___pb0___bit 0
+#define reg_pinmux_rw_pb_iop___pb1___lsb 1
+#define reg_pinmux_rw_pb_iop___pb1___width 1
+#define reg_pinmux_rw_pb_iop___pb1___bit 1
+#define reg_pinmux_rw_pb_iop___pb2___lsb 2
+#define reg_pinmux_rw_pb_iop___pb2___width 1
+#define reg_pinmux_rw_pb_iop___pb2___bit 2
+#define reg_pinmux_rw_pb_iop___pb3___lsb 3
+#define reg_pinmux_rw_pb_iop___pb3___width 1
+#define reg_pinmux_rw_pb_iop___pb3___bit 3
+#define reg_pinmux_rw_pb_iop___pb4___lsb 4
+#define reg_pinmux_rw_pb_iop___pb4___width 1
+#define reg_pinmux_rw_pb_iop___pb4___bit 4
+#define reg_pinmux_rw_pb_iop___pb5___lsb 5
+#define reg_pinmux_rw_pb_iop___pb5___width 1
+#define reg_pinmux_rw_pb_iop___pb5___bit 5
+#define reg_pinmux_rw_pb_iop___pb6___lsb 6
+#define reg_pinmux_rw_pb_iop___pb6___width 1
+#define reg_pinmux_rw_pb_iop___pb6___bit 6
+#define reg_pinmux_rw_pb_iop___pb7___lsb 7
+#define reg_pinmux_rw_pb_iop___pb7___width 1
+#define reg_pinmux_rw_pb_iop___pb7___bit 7
+#define reg_pinmux_rw_pb_iop___pb8___lsb 8
+#define reg_pinmux_rw_pb_iop___pb8___width 1
+#define reg_pinmux_rw_pb_iop___pb8___bit 8
+#define reg_pinmux_rw_pb_iop___pb9___lsb 9
+#define reg_pinmux_rw_pb_iop___pb9___width 1
+#define reg_pinmux_rw_pb_iop___pb9___bit 9
+#define reg_pinmux_rw_pb_iop___pb10___lsb 10
+#define reg_pinmux_rw_pb_iop___pb10___width 1
+#define reg_pinmux_rw_pb_iop___pb10___bit 10
+#define reg_pinmux_rw_pb_iop___pb11___lsb 11
+#define reg_pinmux_rw_pb_iop___pb11___width 1
+#define reg_pinmux_rw_pb_iop___pb11___bit 11
+#define reg_pinmux_rw_pb_iop___pb12___lsb 12
+#define reg_pinmux_rw_pb_iop___pb12___width 1
+#define reg_pinmux_rw_pb_iop___pb12___bit 12
+#define reg_pinmux_rw_pb_iop___pb13___lsb 13
+#define reg_pinmux_rw_pb_iop___pb13___width 1
+#define reg_pinmux_rw_pb_iop___pb13___bit 13
+#define reg_pinmux_rw_pb_iop___pb14___lsb 14
+#define reg_pinmux_rw_pb_iop___pb14___width 1
+#define reg_pinmux_rw_pb_iop___pb14___bit 14
+#define reg_pinmux_rw_pb_iop___pb15___lsb 15
+#define reg_pinmux_rw_pb_iop___pb15___width 1
+#define reg_pinmux_rw_pb_iop___pb15___bit 15
+#define reg_pinmux_rw_pb_iop___pb16___lsb 16
+#define reg_pinmux_rw_pb_iop___pb16___width 1
+#define reg_pinmux_rw_pb_iop___pb16___bit 16
+#define reg_pinmux_rw_pb_iop___pb17___lsb 17
+#define reg_pinmux_rw_pb_iop___pb17___width 1
+#define reg_pinmux_rw_pb_iop___pb17___bit 17
+#define reg_pinmux_rw_pb_iop_offset 12
+
+/* Register rw_pc_gio, scope pinmux, type rw */
+#define reg_pinmux_rw_pc_gio___pc0___lsb 0
+#define reg_pinmux_rw_pc_gio___pc0___width 1
+#define reg_pinmux_rw_pc_gio___pc0___bit 0
+#define reg_pinmux_rw_pc_gio___pc1___lsb 1
+#define reg_pinmux_rw_pc_gio___pc1___width 1
+#define reg_pinmux_rw_pc_gio___pc1___bit 1
+#define reg_pinmux_rw_pc_gio___pc2___lsb 2
+#define reg_pinmux_rw_pc_gio___pc2___width 1
+#define reg_pinmux_rw_pc_gio___pc2___bit 2
+#define reg_pinmux_rw_pc_gio___pc3___lsb 3
+#define reg_pinmux_rw_pc_gio___pc3___width 1
+#define reg_pinmux_rw_pc_gio___pc3___bit 3
+#define reg_pinmux_rw_pc_gio___pc4___lsb 4
+#define reg_pinmux_rw_pc_gio___pc4___width 1
+#define reg_pinmux_rw_pc_gio___pc4___bit 4
+#define reg_pinmux_rw_pc_gio___pc5___lsb 5
+#define reg_pinmux_rw_pc_gio___pc5___width 1
+#define reg_pinmux_rw_pc_gio___pc5___bit 5
+#define reg_pinmux_rw_pc_gio___pc6___lsb 6
+#define reg_pinmux_rw_pc_gio___pc6___width 1
+#define reg_pinmux_rw_pc_gio___pc6___bit 6
+#define reg_pinmux_rw_pc_gio___pc7___lsb 7
+#define reg_pinmux_rw_pc_gio___pc7___width 1
+#define reg_pinmux_rw_pc_gio___pc7___bit 7
+#define reg_pinmux_rw_pc_gio___pc8___lsb 8
+#define reg_pinmux_rw_pc_gio___pc8___width 1
+#define reg_pinmux_rw_pc_gio___pc8___bit 8
+#define reg_pinmux_rw_pc_gio___pc9___lsb 9
+#define reg_pinmux_rw_pc_gio___pc9___width 1
+#define reg_pinmux_rw_pc_gio___pc9___bit 9
+#define reg_pinmux_rw_pc_gio___pc10___lsb 10
+#define reg_pinmux_rw_pc_gio___pc10___width 1
+#define reg_pinmux_rw_pc_gio___pc10___bit 10
+#define reg_pinmux_rw_pc_gio___pc11___lsb 11
+#define reg_pinmux_rw_pc_gio___pc11___width 1
+#define reg_pinmux_rw_pc_gio___pc11___bit 11
+#define reg_pinmux_rw_pc_gio___pc12___lsb 12
+#define reg_pinmux_rw_pc_gio___pc12___width 1
+#define reg_pinmux_rw_pc_gio___pc12___bit 12
+#define reg_pinmux_rw_pc_gio___pc13___lsb 13
+#define reg_pinmux_rw_pc_gio___pc13___width 1
+#define reg_pinmux_rw_pc_gio___pc13___bit 13
+#define reg_pinmux_rw_pc_gio___pc14___lsb 14
+#define reg_pinmux_rw_pc_gio___pc14___width 1
+#define reg_pinmux_rw_pc_gio___pc14___bit 14
+#define reg_pinmux_rw_pc_gio___pc15___lsb 15
+#define reg_pinmux_rw_pc_gio___pc15___width 1
+#define reg_pinmux_rw_pc_gio___pc15___bit 15
+#define reg_pinmux_rw_pc_gio___pc16___lsb 16
+#define reg_pinmux_rw_pc_gio___pc16___width 1
+#define reg_pinmux_rw_pc_gio___pc16___bit 16
+#define reg_pinmux_rw_pc_gio___pc17___lsb 17
+#define reg_pinmux_rw_pc_gio___pc17___width 1
+#define reg_pinmux_rw_pc_gio___pc17___bit 17
+#define reg_pinmux_rw_pc_gio_offset 16
+
+/* Register rw_pc_iop, scope pinmux, type rw */
+#define reg_pinmux_rw_pc_iop___pc0___lsb 0
+#define reg_pinmux_rw_pc_iop___pc0___width 1
+#define reg_pinmux_rw_pc_iop___pc0___bit 0
+#define reg_pinmux_rw_pc_iop___pc1___lsb 1
+#define reg_pinmux_rw_pc_iop___pc1___width 1
+#define reg_pinmux_rw_pc_iop___pc1___bit 1
+#define reg_pinmux_rw_pc_iop___pc2___lsb 2
+#define reg_pinmux_rw_pc_iop___pc2___width 1
+#define reg_pinmux_rw_pc_iop___pc2___bit 2
+#define reg_pinmux_rw_pc_iop___pc3___lsb 3
+#define reg_pinmux_rw_pc_iop___pc3___width 1
+#define reg_pinmux_rw_pc_iop___pc3___bit 3
+#define reg_pinmux_rw_pc_iop___pc4___lsb 4
+#define reg_pinmux_rw_pc_iop___pc4___width 1
+#define reg_pinmux_rw_pc_iop___pc4___bit 4
+#define reg_pinmux_rw_pc_iop___pc5___lsb 5
+#define reg_pinmux_rw_pc_iop___pc5___width 1
+#define reg_pinmux_rw_pc_iop___pc5___bit 5
+#define reg_pinmux_rw_pc_iop___pc6___lsb 6
+#define reg_pinmux_rw_pc_iop___pc6___width 1
+#define reg_pinmux_rw_pc_iop___pc6___bit 6
+#define reg_pinmux_rw_pc_iop___pc7___lsb 7
+#define reg_pinmux_rw_pc_iop___pc7___width 1
+#define reg_pinmux_rw_pc_iop___pc7___bit 7
+#define reg_pinmux_rw_pc_iop___pc8___lsb 8
+#define reg_pinmux_rw_pc_iop___pc8___width 1
+#define reg_pinmux_rw_pc_iop___pc8___bit 8
+#define reg_pinmux_rw_pc_iop___pc9___lsb 9
+#define reg_pinmux_rw_pc_iop___pc9___width 1
+#define reg_pinmux_rw_pc_iop___pc9___bit 9
+#define reg_pinmux_rw_pc_iop___pc10___lsb 10
+#define reg_pinmux_rw_pc_iop___pc10___width 1
+#define reg_pinmux_rw_pc_iop___pc10___bit 10
+#define reg_pinmux_rw_pc_iop___pc11___lsb 11
+#define reg_pinmux_rw_pc_iop___pc11___width 1
+#define reg_pinmux_rw_pc_iop___pc11___bit 11
+#define reg_pinmux_rw_pc_iop___pc12___lsb 12
+#define reg_pinmux_rw_pc_iop___pc12___width 1
+#define reg_pinmux_rw_pc_iop___pc12___bit 12
+#define reg_pinmux_rw_pc_iop___pc13___lsb 13
+#define reg_pinmux_rw_pc_iop___pc13___width 1
+#define reg_pinmux_rw_pc_iop___pc13___bit 13
+#define reg_pinmux_rw_pc_iop___pc14___lsb 14
+#define reg_pinmux_rw_pc_iop___pc14___width 1
+#define reg_pinmux_rw_pc_iop___pc14___bit 14
+#define reg_pinmux_rw_pc_iop___pc15___lsb 15
+#define reg_pinmux_rw_pc_iop___pc15___width 1
+#define reg_pinmux_rw_pc_iop___pc15___bit 15
+#define reg_pinmux_rw_pc_iop___pc16___lsb 16
+#define reg_pinmux_rw_pc_iop___pc16___width 1
+#define reg_pinmux_rw_pc_iop___pc16___bit 16
+#define reg_pinmux_rw_pc_iop___pc17___lsb 17
+#define reg_pinmux_rw_pc_iop___pc17___width 1
+#define reg_pinmux_rw_pc_iop___pc17___bit 17
+#define reg_pinmux_rw_pc_iop_offset 20
+
+/* Register rw_pd_gio, scope pinmux, type rw */
+#define reg_pinmux_rw_pd_gio___pd0___lsb 0
+#define reg_pinmux_rw_pd_gio___pd0___width 1
+#define reg_pinmux_rw_pd_gio___pd0___bit 0
+#define reg_pinmux_rw_pd_gio___pd1___lsb 1
+#define reg_pinmux_rw_pd_gio___pd1___width 1
+#define reg_pinmux_rw_pd_gio___pd1___bit 1
+#define reg_pinmux_rw_pd_gio___pd2___lsb 2
+#define reg_pinmux_rw_pd_gio___pd2___width 1
+#define reg_pinmux_rw_pd_gio___pd2___bit 2
+#define reg_pinmux_rw_pd_gio___pd3___lsb 3
+#define reg_pinmux_rw_pd_gio___pd3___width 1
+#define reg_pinmux_rw_pd_gio___pd3___bit 3
+#define reg_pinmux_rw_pd_gio___pd4___lsb 4
+#define reg_pinmux_rw_pd_gio___pd4___width 1
+#define reg_pinmux_rw_pd_gio___pd4___bit 4
+#define reg_pinmux_rw_pd_gio___pd5___lsb 5
+#define reg_pinmux_rw_pd_gio___pd5___width 1
+#define reg_pinmux_rw_pd_gio___pd5___bit 5
+#define reg_pinmux_rw_pd_gio___pd6___lsb 6
+#define reg_pinmux_rw_pd_gio___pd6___width 1
+#define reg_pinmux_rw_pd_gio___pd6___bit 6
+#define reg_pinmux_rw_pd_gio___pd7___lsb 7
+#define reg_pinmux_rw_pd_gio___pd7___width 1
+#define reg_pinmux_rw_pd_gio___pd7___bit 7
+#define reg_pinmux_rw_pd_gio___pd8___lsb 8
+#define reg_pinmux_rw_pd_gio___pd8___width 1
+#define reg_pinmux_rw_pd_gio___pd8___bit 8
+#define reg_pinmux_rw_pd_gio___pd9___lsb 9
+#define reg_pinmux_rw_pd_gio___pd9___width 1
+#define reg_pinmux_rw_pd_gio___pd9___bit 9
+#define reg_pinmux_rw_pd_gio___pd10___lsb 10
+#define reg_pinmux_rw_pd_gio___pd10___width 1
+#define reg_pinmux_rw_pd_gio___pd10___bit 10
+#define reg_pinmux_rw_pd_gio___pd11___lsb 11
+#define reg_pinmux_rw_pd_gio___pd11___width 1
+#define reg_pinmux_rw_pd_gio___pd11___bit 11
+#define reg_pinmux_rw_pd_gio___pd12___lsb 12
+#define reg_pinmux_rw_pd_gio___pd12___width 1
+#define reg_pinmux_rw_pd_gio___pd12___bit 12
+#define reg_pinmux_rw_pd_gio___pd13___lsb 13
+#define reg_pinmux_rw_pd_gio___pd13___width 1
+#define reg_pinmux_rw_pd_gio___pd13___bit 13
+#define reg_pinmux_rw_pd_gio___pd14___lsb 14
+#define reg_pinmux_rw_pd_gio___pd14___width 1
+#define reg_pinmux_rw_pd_gio___pd14___bit 14
+#define reg_pinmux_rw_pd_gio___pd15___lsb 15
+#define reg_pinmux_rw_pd_gio___pd15___width 1
+#define reg_pinmux_rw_pd_gio___pd15___bit 15
+#define reg_pinmux_rw_pd_gio___pd16___lsb 16
+#define reg_pinmux_rw_pd_gio___pd16___width 1
+#define reg_pinmux_rw_pd_gio___pd16___bit 16
+#define reg_pinmux_rw_pd_gio___pd17___lsb 17
+#define reg_pinmux_rw_pd_gio___pd17___width 1
+#define reg_pinmux_rw_pd_gio___pd17___bit 17
+#define reg_pinmux_rw_pd_gio_offset 24
+
+/* Register rw_pd_iop, scope pinmux, type rw */
+#define reg_pinmux_rw_pd_iop___pd0___lsb 0
+#define reg_pinmux_rw_pd_iop___pd0___width 1
+#define reg_pinmux_rw_pd_iop___pd0___bit 0
+#define reg_pinmux_rw_pd_iop___pd1___lsb 1
+#define reg_pinmux_rw_pd_iop___pd1___width 1
+#define reg_pinmux_rw_pd_iop___pd1___bit 1
+#define reg_pinmux_rw_pd_iop___pd2___lsb 2
+#define reg_pinmux_rw_pd_iop___pd2___width 1
+#define reg_pinmux_rw_pd_iop___pd2___bit 2
+#define reg_pinmux_rw_pd_iop___pd3___lsb 3
+#define reg_pinmux_rw_pd_iop___pd3___width 1
+#define reg_pinmux_rw_pd_iop___pd3___bit 3
+#define reg_pinmux_rw_pd_iop___pd4___lsb 4
+#define reg_pinmux_rw_pd_iop___pd4___width 1
+#define reg_pinmux_rw_pd_iop___pd4___bit 4
+#define reg_pinmux_rw_pd_iop___pd5___lsb 5
+#define reg_pinmux_rw_pd_iop___pd5___width 1
+#define reg_pinmux_rw_pd_iop___pd5___bit 5
+#define reg_pinmux_rw_pd_iop___pd6___lsb 6
+#define reg_pinmux_rw_pd_iop___pd6___width 1
+#define reg_pinmux_rw_pd_iop___pd6___bit 6
+#define reg_pinmux_rw_pd_iop___pd7___lsb 7
+#define reg_pinmux_rw_pd_iop___pd7___width 1
+#define reg_pinmux_rw_pd_iop___pd7___bit 7
+#define reg_pinmux_rw_pd_iop___pd8___lsb 8
+#define reg_pinmux_rw_pd_iop___pd8___width 1
+#define reg_pinmux_rw_pd_iop___pd8___bit 8
+#define reg_pinmux_rw_pd_iop___pd9___lsb 9
+#define reg_pinmux_rw_pd_iop___pd9___width 1
+#define reg_pinmux_rw_pd_iop___pd9___bit 9
+#define reg_pinmux_rw_pd_iop___pd10___lsb 10
+#define reg_pinmux_rw_pd_iop___pd10___width 1
+#define reg_pinmux_rw_pd_iop___pd10___bit 10
+#define reg_pinmux_rw_pd_iop___pd11___lsb 11
+#define reg_pinmux_rw_pd_iop___pd11___width 1
+#define reg_pinmux_rw_pd_iop___pd11___bit 11
+#define reg_pinmux_rw_pd_iop___pd12___lsb 12
+#define reg_pinmux_rw_pd_iop___pd12___width 1
+#define reg_pinmux_rw_pd_iop___pd12___bit 12
+#define reg_pinmux_rw_pd_iop___pd13___lsb 13
+#define reg_pinmux_rw_pd_iop___pd13___width 1
+#define reg_pinmux_rw_pd_iop___pd13___bit 13
+#define reg_pinmux_rw_pd_iop___pd14___lsb 14
+#define reg_pinmux_rw_pd_iop___pd14___width 1
+#define reg_pinmux_rw_pd_iop___pd14___bit 14
+#define reg_pinmux_rw_pd_iop___pd15___lsb 15
+#define reg_pinmux_rw_pd_iop___pd15___width 1
+#define reg_pinmux_rw_pd_iop___pd15___bit 15
+#define reg_pinmux_rw_pd_iop___pd16___lsb 16
+#define reg_pinmux_rw_pd_iop___pd16___width 1
+#define reg_pinmux_rw_pd_iop___pd16___bit 16
+#define reg_pinmux_rw_pd_iop___pd17___lsb 17
+#define reg_pinmux_rw_pd_iop___pd17___width 1
+#define reg_pinmux_rw_pd_iop___pd17___bit 17
+#define reg_pinmux_rw_pd_iop_offset 28
+
+/* Register rw_pe_gio, scope pinmux, type rw */
+#define reg_pinmux_rw_pe_gio___pe0___lsb 0
+#define reg_pinmux_rw_pe_gio___pe0___width 1
+#define reg_pinmux_rw_pe_gio___pe0___bit 0
+#define reg_pinmux_rw_pe_gio___pe1___lsb 1
+#define reg_pinmux_rw_pe_gio___pe1___width 1
+#define reg_pinmux_rw_pe_gio___pe1___bit 1
+#define reg_pinmux_rw_pe_gio___pe2___lsb 2
+#define reg_pinmux_rw_pe_gio___pe2___width 1
+#define reg_pinmux_rw_pe_gio___pe2___bit 2
+#define reg_pinmux_rw_pe_gio___pe3___lsb 3
+#define reg_pinmux_rw_pe_gio___pe3___width 1
+#define reg_pinmux_rw_pe_gio___pe3___bit 3
+#define reg_pinmux_rw_pe_gio___pe4___lsb 4
+#define reg_pinmux_rw_pe_gio___pe4___width 1
+#define reg_pinmux_rw_pe_gio___pe4___bit 4
+#define reg_pinmux_rw_pe_gio___pe5___lsb 5
+#define reg_pinmux_rw_pe_gio___pe5___width 1
+#define reg_pinmux_rw_pe_gio___pe5___bit 5
+#define reg_pinmux_rw_pe_gio___pe6___lsb 6
+#define reg_pinmux_rw_pe_gio___pe6___width 1
+#define reg_pinmux_rw_pe_gio___pe6___bit 6
+#define reg_pinmux_rw_pe_gio___pe7___lsb 7
+#define reg_pinmux_rw_pe_gio___pe7___width 1
+#define reg_pinmux_rw_pe_gio___pe7___bit 7
+#define reg_pinmux_rw_pe_gio___pe8___lsb 8
+#define reg_pinmux_rw_pe_gio___pe8___width 1
+#define reg_pinmux_rw_pe_gio___pe8___bit 8
+#define reg_pinmux_rw_pe_gio___pe9___lsb 9
+#define reg_pinmux_rw_pe_gio___pe9___width 1
+#define reg_pinmux_rw_pe_gio___pe9___bit 9
+#define reg_pinmux_rw_pe_gio___pe10___lsb 10
+#define reg_pinmux_rw_pe_gio___pe10___width 1
+#define reg_pinmux_rw_pe_gio___pe10___bit 10
+#define reg_pinmux_rw_pe_gio___pe11___lsb 11
+#define reg_pinmux_rw_pe_gio___pe11___width 1
+#define reg_pinmux_rw_pe_gio___pe11___bit 11
+#define reg_pinmux_rw_pe_gio___pe12___lsb 12
+#define reg_pinmux_rw_pe_gio___pe12___width 1
+#define reg_pinmux_rw_pe_gio___pe12___bit 12
+#define reg_pinmux_rw_pe_gio___pe13___lsb 13
+#define reg_pinmux_rw_pe_gio___pe13___width 1
+#define reg_pinmux_rw_pe_gio___pe13___bit 13
+#define reg_pinmux_rw_pe_gio___pe14___lsb 14
+#define reg_pinmux_rw_pe_gio___pe14___width 1
+#define reg_pinmux_rw_pe_gio___pe14___bit 14
+#define reg_pinmux_rw_pe_gio___pe15___lsb 15
+#define reg_pinmux_rw_pe_gio___pe15___width 1
+#define reg_pinmux_rw_pe_gio___pe15___bit 15
+#define reg_pinmux_rw_pe_gio___pe16___lsb 16
+#define reg_pinmux_rw_pe_gio___pe16___width 1
+#define reg_pinmux_rw_pe_gio___pe16___bit 16
+#define reg_pinmux_rw_pe_gio___pe17___lsb 17
+#define reg_pinmux_rw_pe_gio___pe17___width 1
+#define reg_pinmux_rw_pe_gio___pe17___bit 17
+#define reg_pinmux_rw_pe_gio_offset 32
+
+/* Register rw_pe_iop, scope pinmux, type rw */
+#define reg_pinmux_rw_pe_iop___pe0___lsb 0
+#define reg_pinmux_rw_pe_iop___pe0___width 1
+#define reg_pinmux_rw_pe_iop___pe0___bit 0
+#define reg_pinmux_rw_pe_iop___pe1___lsb 1
+#define reg_pinmux_rw_pe_iop___pe1___width 1
+#define reg_pinmux_rw_pe_iop___pe1___bit 1
+#define reg_pinmux_rw_pe_iop___pe2___lsb 2
+#define reg_pinmux_rw_pe_iop___pe2___width 1
+#define reg_pinmux_rw_pe_iop___pe2___bit 2
+#define reg_pinmux_rw_pe_iop___pe3___lsb 3
+#define reg_pinmux_rw_pe_iop___pe3___width 1
+#define reg_pinmux_rw_pe_iop___pe3___bit 3
+#define reg_pinmux_rw_pe_iop___pe4___lsb 4
+#define reg_pinmux_rw_pe_iop___pe4___width 1
+#define reg_pinmux_rw_pe_iop___pe4___bit 4
+#define reg_pinmux_rw_pe_iop___pe5___lsb 5
+#define reg_pinmux_rw_pe_iop___pe5___width 1
+#define reg_pinmux_rw_pe_iop___pe5___bit 5
+#define reg_pinmux_rw_pe_iop___pe6___lsb 6
+#define reg_pinmux_rw_pe_iop___pe6___width 1
+#define reg_pinmux_rw_pe_iop___pe6___bit 6
+#define reg_pinmux_rw_pe_iop___pe7___lsb 7
+#define reg_pinmux_rw_pe_iop___pe7___width 1
+#define reg_pinmux_rw_pe_iop___pe7___bit 7
+#define reg_pinmux_rw_pe_iop___pe8___lsb 8
+#define reg_pinmux_rw_pe_iop___pe8___width 1
+#define reg_pinmux_rw_pe_iop___pe8___bit 8
+#define reg_pinmux_rw_pe_iop___pe9___lsb 9
+#define reg_pinmux_rw_pe_iop___pe9___width 1
+#define reg_pinmux_rw_pe_iop___pe9___bit 9
+#define reg_pinmux_rw_pe_iop___pe10___lsb 10
+#define reg_pinmux_rw_pe_iop___pe10___width 1
+#define reg_pinmux_rw_pe_iop___pe10___bit 10
+#define reg_pinmux_rw_pe_iop___pe11___lsb 11
+#define reg_pinmux_rw_pe_iop___pe11___width 1
+#define reg_pinmux_rw_pe_iop___pe11___bit 11
+#define reg_pinmux_rw_pe_iop___pe12___lsb 12
+#define reg_pinmux_rw_pe_iop___pe12___width 1
+#define reg_pinmux_rw_pe_iop___pe12___bit 12
+#define reg_pinmux_rw_pe_iop___pe13___lsb 13
+#define reg_pinmux_rw_pe_iop___pe13___width 1
+#define reg_pinmux_rw_pe_iop___pe13___bit 13
+#define reg_pinmux_rw_pe_iop___pe14___lsb 14
+#define reg_pinmux_rw_pe_iop___pe14___width 1
+#define reg_pinmux_rw_pe_iop___pe14___bit 14
+#define reg_pinmux_rw_pe_iop___pe15___lsb 15
+#define reg_pinmux_rw_pe_iop___pe15___width 1
+#define reg_pinmux_rw_pe_iop___pe15___bit 15
+#define reg_pinmux_rw_pe_iop___pe16___lsb 16
+#define reg_pinmux_rw_pe_iop___pe16___width 1
+#define reg_pinmux_rw_pe_iop___pe16___bit 16
+#define reg_pinmux_rw_pe_iop___pe17___lsb 17
+#define reg_pinmux_rw_pe_iop___pe17___width 1
+#define reg_pinmux_rw_pe_iop___pe17___bit 17
+#define reg_pinmux_rw_pe_iop_offset 36
+
+/* Register rw_usb_phy, scope pinmux, type rw */
+#define reg_pinmux_rw_usb_phy___en_usb0___lsb 0
+#define reg_pinmux_rw_usb_phy___en_usb0___width 1
+#define reg_pinmux_rw_usb_phy___en_usb0___bit 0
+#define reg_pinmux_rw_usb_phy___en_usb1___lsb 1
+#define reg_pinmux_rw_usb_phy___en_usb1___width 1
+#define reg_pinmux_rw_usb_phy___en_usb1___bit 1
+#define reg_pinmux_rw_usb_phy_offset 40
+
+
+/* Constants */
+#define regk_pinmux_no                            0x00000000
+#define regk_pinmux_rw_hwprot_default             0x00000000
+#define regk_pinmux_rw_pa_default                 0x00000000
+#define regk_pinmux_rw_pb_gio_default             0x00000000
+#define regk_pinmux_rw_pb_iop_default             0x00000000
+#define regk_pinmux_rw_pc_gio_default             0x00000000
+#define regk_pinmux_rw_pc_iop_default             0x00000000
+#define regk_pinmux_rw_pd_gio_default             0x00000000
+#define regk_pinmux_rw_pd_iop_default             0x00000000
+#define regk_pinmux_rw_pe_gio_default             0x00000000
+#define regk_pinmux_rw_pe_iop_default             0x00000000
+#define regk_pinmux_rw_usb_phy_default            0x00000000
+#define regk_pinmux_yes                           0x00000001
+#endif /* __pinmux_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h

@@ -0,0 +1,96 @@
+#ifndef __reg_map_h
+#define __reg_map_h
+
+/*
+ * This file is autogenerated from
+ *   file:            ../../mod/fakereg.rmap
+ *     id:            fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp
+ *     last modified: Wed Feb 11 20:53:25 2004
+ *   file:            ../../rtl/global.rmap
+ *     id:            global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp
+ *     last modified: Mon Aug 18 17:08:23 2003
+ *   file:            ../../mod/modreg.rmap
+ *     id:            modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp
+ *     last modified: Fri Feb 20 16:40:04 2004
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap
+ *      id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+#define regi_artpec_mod                           0xb7044000
+#define regi_ata                                  0xb0032000
+#define regi_ata_mod                              0xb7006000
+#define regi_barber                               0xb701a000
+#define regi_bif_core                             0xb0014000
+#define regi_bif_dma                              0xb0016000
+#define regi_bif_slave                            0xb0018000
+#define regi_bif_slave_ext                        0xac000000
+#define regi_bus_master                           0xb703c000
+#define regi_config                               0xb003c000
+#define regi_dma0                                 0xb0000000
+#define regi_dma1                                 0xb0002000
+#define regi_dma2                                 0xb0004000
+#define regi_dma3                                 0xb0006000
+#define regi_dma4                                 0xb0008000
+#define regi_dma5                                 0xb000a000
+#define regi_dma6                                 0xb000c000
+#define regi_dma7                                 0xb000e000
+#define regi_dma8                                 0xb0010000
+#define regi_dma9                                 0xb0012000
+#define regi_eth0                                 0xb0034000
+#define regi_eth1                                 0xb0036000
+#define regi_eth_mod                              0xb7004000
+#define regi_eth_mod1                             0xb701c000
+#define regi_eth_strmod                           0xb7008000
+#define regi_eth_strmod1                          0xb7032000
+#define regi_ext_dma                              0xb703a000
+#define regi_ext_mem                              0xb7046000
+#define regi_gen_io                               0xb7016000
+#define regi_gio                                  0xb001a000
+#define regi_hook                                 0xb7000000
+#define regi_iop                                  0xb0020000
+#define regi_irq                                  0xb001c000
+#define regi_irq_nmi                              0xb701e000
+#define regi_marb                                 0xb003e000
+#define regi_marb_bp0                             0xb003e240
+#define regi_marb_bp1                             0xb003e280
+#define regi_marb_bp2                             0xb003e2c0
+#define regi_marb_bp3                             0xb003e300
+#define regi_nand_mod                             0xb7014000
+#define regi_p21                                  0xb002e000
+#define regi_p21_mod                              0xb7042000
+#define regi_pci_mod                              0xb7010000
+#define regi_pin_test                             0xb7018000
+#define regi_pinmux                               0xb0038000
+#define regi_sdram_chk                            0xb703e000
+#define regi_sdram_mod                            0xb7012000
+#define regi_ser0                                 0xb0026000
+#define regi_ser1                                 0xb0028000
+#define regi_ser2                                 0xb002a000
+#define regi_ser3                                 0xb002c000
+#define regi_ser_mod0                             0xb7020000
+#define regi_ser_mod1                             0xb7022000
+#define regi_ser_mod2                             0xb7024000
+#define regi_ser_mod3                             0xb7026000
+#define regi_smif_stat                            0xb700e000
+#define regi_sser0                                0xb0022000
+#define regi_sser1                                0xb0024000
+#define regi_sser_mod0                            0xb700a000
+#define regi_sser_mod1                            0xb700c000
+#define regi_strcop                               0xb0030000
+#define regi_strmux                               0xb003a000
+#define regi_strmux_tst                           0xb7040000
+#define regi_tap                                  0xb7002000
+#define regi_timer                                0xb001e000
+#define regi_timer_mod                            0xb7034000
+#define regi_trace                                0xb0040000
+#define regi_usb0                                 0xb7028000
+#define regi_usb1                                 0xb702a000
+#define regi_usb2                                 0xb702c000
+#define regi_usb3                                 0xb702e000
+#define regi_usb_dev                              0xb7030000
+#define regi_utmi_mod0                            0xb7036000
+#define regi_utmi_mod1                            0xb7038000
+#endif /* __reg_map_h */

include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h

@@ -0,0 +1,142 @@
+#ifndef __rt_trace_defs_asm_h
+#define __rt_trace_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/rt_trace/rtl/rt_regs.r
+ *     id:           rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp
+ *     last modfied: Mon Apr 11 16:09:14 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/rt_trace_defs_asm.h ../../inst/rt_trace/rtl/rt_regs.r
+ *      id: $Id: rt_trace_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_cfg, scope rt_trace, type rw */
+#define reg_rt_trace_rw_cfg___en___lsb 0
+#define reg_rt_trace_rw_cfg___en___width 1
+#define reg_rt_trace_rw_cfg___en___bit 0
+#define reg_rt_trace_rw_cfg___mode___lsb 1
+#define reg_rt_trace_rw_cfg___mode___width 1
+#define reg_rt_trace_rw_cfg___mode___bit 1
+#define reg_rt_trace_rw_cfg___owner___lsb 2
+#define reg_rt_trace_rw_cfg___owner___width 1
+#define reg_rt_trace_rw_cfg___owner___bit 2
+#define reg_rt_trace_rw_cfg___wp___lsb 3
+#define reg_rt_trace_rw_cfg___wp___width 1
+#define reg_rt_trace_rw_cfg___wp___bit 3
+#define reg_rt_trace_rw_cfg___stall___lsb 4
+#define reg_rt_trace_rw_cfg___stall___width 1
+#define reg_rt_trace_rw_cfg___stall___bit 4
+#define reg_rt_trace_rw_cfg___wp_start___lsb 8
+#define reg_rt_trace_rw_cfg___wp_start___width 7
+#define reg_rt_trace_rw_cfg___wp_stop___lsb 16
+#define reg_rt_trace_rw_cfg___wp_stop___width 7
+#define reg_rt_trace_rw_cfg_offset 0
+
+/* Register rw_tap_ctrl, scope rt_trace, type rw */
+#define reg_rt_trace_rw_tap_ctrl___ack_data___lsb 0
+#define reg_rt_trace_rw_tap_ctrl___ack_data___width 1
+#define reg_rt_trace_rw_tap_ctrl___ack_data___bit 0
+#define reg_rt_trace_rw_tap_ctrl___ack_guru___lsb 1
+#define reg_rt_trace_rw_tap_ctrl___ack_guru___width 1
+#define reg_rt_trace_rw_tap_ctrl___ack_guru___bit 1
+#define reg_rt_trace_rw_tap_ctrl_offset 4
+
+/* Register r_tap_stat, scope rt_trace, type r */
+#define reg_rt_trace_r_tap_stat___dav___lsb 0
+#define reg_rt_trace_r_tap_stat___dav___width 1
+#define reg_rt_trace_r_tap_stat___dav___bit 0
+#define reg_rt_trace_r_tap_stat___empty___lsb 1
+#define reg_rt_trace_r_tap_stat___empty___width 1
+#define reg_rt_trace_r_tap_stat___empty___bit 1
+#define reg_rt_trace_r_tap_stat_offset 8
+
+/* Register rw_tap_data, scope rt_trace, type rw */
+#define reg_rt_trace_rw_tap_data_offset 12
+
+/* Register rw_tap_hdata, scope rt_trace, type rw */
+#define reg_rt_trace_rw_tap_hdata___op___lsb 0
+#define reg_rt_trace_rw_tap_hdata___op___width 4
+#define reg_rt_trace_rw_tap_hdata___sub_op___lsb 4
+#define reg_rt_trace_rw_tap_hdata___sub_op___width 4
+#define reg_rt_trace_rw_tap_hdata_offset 16
+
+/* Register r_redir, scope rt_trace, type r */
+#define reg_rt_trace_r_redir_offset 20
+
+
+/* Constants */
+#define regk_rt_trace_brk                         0x0000000c
+#define regk_rt_trace_dbg                         0x00000003
+#define regk_rt_trace_dbgdi                       0x00000004
+#define regk_rt_trace_dbgdo                       0x00000005
+#define regk_rt_trace_gmode                       0x00000000
+#define regk_rt_trace_no                          0x00000000
+#define regk_rt_trace_nop                         0x00000000
+#define regk_rt_trace_normal                      0x00000000
+#define regk_rt_trace_rdmem                       0x00000007
+#define regk_rt_trace_rdmemb                      0x00000009
+#define regk_rt_trace_rdpreg                      0x00000002
+#define regk_rt_trace_rdreg                       0x00000001
+#define regk_rt_trace_rdsreg                      0x00000003
+#define regk_rt_trace_redir                       0x00000006
+#define regk_rt_trace_ret                         0x0000000b
+#define regk_rt_trace_rw_cfg_default              0x00000000
+#define regk_rt_trace_trcfg                       0x00000001
+#define regk_rt_trace_wp                          0x00000001
+#define regk_rt_trace_wp0                         0x00000001
+#define regk_rt_trace_wp1                         0x00000002
+#define regk_rt_trace_wp2                         0x00000004
+#define regk_rt_trace_wp3                         0x00000008
+#define regk_rt_trace_wp4                         0x00000010
+#define regk_rt_trace_wp5                         0x00000020
+#define regk_rt_trace_wp6                         0x00000040
+#define regk_rt_trace_wrmem                       0x00000008
+#define regk_rt_trace_wrmemb                      0x0000000a
+#define regk_rt_trace_wrpreg                      0x00000005
+#define regk_rt_trace_wrreg                       0x00000004
+#define regk_rt_trace_wrsreg                      0x00000006
+#define regk_rt_trace_yes                         0x00000001
+#endif /* __rt_trace_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h

@@ -0,0 +1,359 @@
+#ifndef __ser_defs_asm_h
+#define __ser_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/ser/rtl/ser_regs.r
+ *     id:           ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp
+ *     last modfied: Mon Apr 11 16:09:21 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ser_defs_asm.h ../../inst/ser/rtl/ser_regs.r
+ *      id: $Id: ser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_tr_ctrl, scope ser, type rw */
+#define reg_ser_rw_tr_ctrl___base_freq___lsb 0
+#define reg_ser_rw_tr_ctrl___base_freq___width 3
+#define reg_ser_rw_tr_ctrl___en___lsb 3
+#define reg_ser_rw_tr_ctrl___en___width 1
+#define reg_ser_rw_tr_ctrl___en___bit 3
+#define reg_ser_rw_tr_ctrl___par___lsb 4
+#define reg_ser_rw_tr_ctrl___par___width 2
+#define reg_ser_rw_tr_ctrl___par_en___lsb 6
+#define reg_ser_rw_tr_ctrl___par_en___width 1
+#define reg_ser_rw_tr_ctrl___par_en___bit 6
+#define reg_ser_rw_tr_ctrl___data_bits___lsb 7
+#define reg_ser_rw_tr_ctrl___data_bits___width 1
+#define reg_ser_rw_tr_ctrl___data_bits___bit 7
+#define reg_ser_rw_tr_ctrl___stop_bits___lsb 8
+#define reg_ser_rw_tr_ctrl___stop_bits___width 1
+#define reg_ser_rw_tr_ctrl___stop_bits___bit 8
+#define reg_ser_rw_tr_ctrl___stop___lsb 9
+#define reg_ser_rw_tr_ctrl___stop___width 1
+#define reg_ser_rw_tr_ctrl___stop___bit 9
+#define reg_ser_rw_tr_ctrl___rts_delay___lsb 10
+#define reg_ser_rw_tr_ctrl___rts_delay___width 3
+#define reg_ser_rw_tr_ctrl___rts_setup___lsb 13
+#define reg_ser_rw_tr_ctrl___rts_setup___width 1
+#define reg_ser_rw_tr_ctrl___rts_setup___bit 13
+#define reg_ser_rw_tr_ctrl___auto_rts___lsb 14
+#define reg_ser_rw_tr_ctrl___auto_rts___width 1
+#define reg_ser_rw_tr_ctrl___auto_rts___bit 14
+#define reg_ser_rw_tr_ctrl___txd___lsb 15
+#define reg_ser_rw_tr_ctrl___txd___width 1
+#define reg_ser_rw_tr_ctrl___txd___bit 15
+#define reg_ser_rw_tr_ctrl___auto_cts___lsb 16
+#define reg_ser_rw_tr_ctrl___auto_cts___width 1
+#define reg_ser_rw_tr_ctrl___auto_cts___bit 16
+#define reg_ser_rw_tr_ctrl_offset 0
+
+/* Register rw_tr_dma_en, scope ser, type rw */
+#define reg_ser_rw_tr_dma_en___en___lsb 0
+#define reg_ser_rw_tr_dma_en___en___width 1
+#define reg_ser_rw_tr_dma_en___en___bit 0
+#define reg_ser_rw_tr_dma_en_offset 4
+
+/* Register rw_rec_ctrl, scope ser, type rw */
+#define reg_ser_rw_rec_ctrl___base_freq___lsb 0
+#define reg_ser_rw_rec_ctrl___base_freq___width 3
+#define reg_ser_rw_rec_ctrl___en___lsb 3
+#define reg_ser_rw_rec_ctrl___en___width 1
+#define reg_ser_rw_rec_ctrl___en___bit 3
+#define reg_ser_rw_rec_ctrl___par___lsb 4
+#define reg_ser_rw_rec_ctrl___par___width 2
+#define reg_ser_rw_rec_ctrl___par_en___lsb 6
+#define reg_ser_rw_rec_ctrl___par_en___width 1
+#define reg_ser_rw_rec_ctrl___par_en___bit 6
+#define reg_ser_rw_rec_ctrl___data_bits___lsb 7
+#define reg_ser_rw_rec_ctrl___data_bits___width 1
+#define reg_ser_rw_rec_ctrl___data_bits___bit 7
+#define reg_ser_rw_rec_ctrl___dma_mode___lsb 8
+#define reg_ser_rw_rec_ctrl___dma_mode___width 1
+#define reg_ser_rw_rec_ctrl___dma_mode___bit 8
+#define reg_ser_rw_rec_ctrl___dma_err___lsb 9
+#define reg_ser_rw_rec_ctrl___dma_err___width 1
+#define reg_ser_rw_rec_ctrl___dma_err___bit 9
+#define reg_ser_rw_rec_ctrl___sampling___lsb 10
+#define reg_ser_rw_rec_ctrl___sampling___width 1
+#define reg_ser_rw_rec_ctrl___sampling___bit 10
+#define reg_ser_rw_rec_ctrl___timeout___lsb 11
+#define reg_ser_rw_rec_ctrl___timeout___width 3
+#define reg_ser_rw_rec_ctrl___auto_eop___lsb 14
+#define reg_ser_rw_rec_ctrl___auto_eop___width 1
+#define reg_ser_rw_rec_ctrl___auto_eop___bit 14
+#define reg_ser_rw_rec_ctrl___half_duplex___lsb 15
+#define reg_ser_rw_rec_ctrl___half_duplex___width 1
+#define reg_ser_rw_rec_ctrl___half_duplex___bit 15
+#define reg_ser_rw_rec_ctrl___rts_n___lsb 16
+#define reg_ser_rw_rec_ctrl___rts_n___width 1
+#define reg_ser_rw_rec_ctrl___rts_n___bit 16
+#define reg_ser_rw_rec_ctrl___loopback___lsb 17
+#define reg_ser_rw_rec_ctrl___loopback___width 1
+#define reg_ser_rw_rec_ctrl___loopback___bit 17
+#define reg_ser_rw_rec_ctrl_offset 8
+
+/* Register rw_tr_baud_div, scope ser, type rw */
+#define reg_ser_rw_tr_baud_div___div___lsb 0
+#define reg_ser_rw_tr_baud_div___div___width 16
+#define reg_ser_rw_tr_baud_div_offset 12
+
+/* Register rw_rec_baud_div, scope ser, type rw */
+#define reg_ser_rw_rec_baud_div___div___lsb 0
+#define reg_ser_rw_rec_baud_div___div___width 16
+#define reg_ser_rw_rec_baud_div_offset 16
+
+/* Register rw_xoff, scope ser, type rw */
+#define reg_ser_rw_xoff___chr___lsb 0
+#define reg_ser_rw_xoff___chr___width 8
+#define reg_ser_rw_xoff___automatic___lsb 8
+#define reg_ser_rw_xoff___automatic___width 1
+#define reg_ser_rw_xoff___automatic___bit 8
+#define reg_ser_rw_xoff_offset 20
+
+/* Register rw_xoff_clr, scope ser, type rw */
+#define reg_ser_rw_xoff_clr___clr___lsb 0
+#define reg_ser_rw_xoff_clr___clr___width 1
+#define reg_ser_rw_xoff_clr___clr___bit 0
+#define reg_ser_rw_xoff_clr_offset 24
+
+/* Register rw_dout, scope ser, type rw */
+#define reg_ser_rw_dout___data___lsb 0
+#define reg_ser_rw_dout___data___width 8
+#define reg_ser_rw_dout_offset 28
+
+/* Register rs_stat_din, scope ser, type rs */
+#define reg_ser_rs_stat_din___data___lsb 0
+#define reg_ser_rs_stat_din___data___width 8
+#define reg_ser_rs_stat_din___dav___lsb 16
+#define reg_ser_rs_stat_din___dav___width 1
+#define reg_ser_rs_stat_din___dav___bit 16
+#define reg_ser_rs_stat_din___framing_err___lsb 17
+#define reg_ser_rs_stat_din___framing_err___width 1
+#define reg_ser_rs_stat_din___framing_err___bit 17
+#define reg_ser_rs_stat_din___par_err___lsb 18
+#define reg_ser_rs_stat_din___par_err___width 1
+#define reg_ser_rs_stat_din___par_err___bit 18
+#define reg_ser_rs_stat_din___orun___lsb 19
+#define reg_ser_rs_stat_din___orun___width 1
+#define reg_ser_rs_stat_din___orun___bit 19
+#define reg_ser_rs_stat_din___rec_err___lsb 20
+#define reg_ser_rs_stat_din___rec_err___width 1
+#define reg_ser_rs_stat_din___rec_err___bit 20
+#define reg_ser_rs_stat_din___rxd___lsb 21
+#define reg_ser_rs_stat_din___rxd___width 1
+#define reg_ser_rs_stat_din___rxd___bit 21
+#define reg_ser_rs_stat_din___tr_idle___lsb 22
+#define reg_ser_rs_stat_din___tr_idle___width 1
+#define reg_ser_rs_stat_din___tr_idle___bit 22
+#define reg_ser_rs_stat_din___tr_empty___lsb 23
+#define reg_ser_rs_stat_din___tr_empty___width 1
+#define reg_ser_rs_stat_din___tr_empty___bit 23
+#define reg_ser_rs_stat_din___tr_rdy___lsb 24
+#define reg_ser_rs_stat_din___tr_rdy___width 1
+#define reg_ser_rs_stat_din___tr_rdy___bit 24
+#define reg_ser_rs_stat_din___cts_n___lsb 25
+#define reg_ser_rs_stat_din___cts_n___width 1
+#define reg_ser_rs_stat_din___cts_n___bit 25
+#define reg_ser_rs_stat_din___xoff_detect___lsb 26
+#define reg_ser_rs_stat_din___xoff_detect___width 1
+#define reg_ser_rs_stat_din___xoff_detect___bit 26
+#define reg_ser_rs_stat_din___rts_n___lsb 27
+#define reg_ser_rs_stat_din___rts_n___width 1
+#define reg_ser_rs_stat_din___rts_n___bit 27
+#define reg_ser_rs_stat_din___txd___lsb 28
+#define reg_ser_rs_stat_din___txd___width 1
+#define reg_ser_rs_stat_din___txd___bit 28
+#define reg_ser_rs_stat_din_offset 32
+
+/* Register r_stat_din, scope ser, type r */
+#define reg_ser_r_stat_din___data___lsb 0
+#define reg_ser_r_stat_din___data___width 8
+#define reg_ser_r_stat_din___dav___lsb 16
+#define reg_ser_r_stat_din___dav___width 1
+#define reg_ser_r_stat_din___dav___bit 16
+#define reg_ser_r_stat_din___framing_err___lsb 17
+#define reg_ser_r_stat_din___framing_err___width 1
+#define reg_ser_r_stat_din___framing_err___bit 17
+#define reg_ser_r_stat_din___par_err___lsb 18
+#define reg_ser_r_stat_din___par_err___width 1
+#define reg_ser_r_stat_din___par_err___bit 18
+#define reg_ser_r_stat_din___orun___lsb 19
+#define reg_ser_r_stat_din___orun___width 1
+#define reg_ser_r_stat_din___orun___bit 19
+#define reg_ser_r_stat_din___rec_err___lsb 20
+#define reg_ser_r_stat_din___rec_err___width 1
+#define reg_ser_r_stat_din___rec_err___bit 20
+#define reg_ser_r_stat_din___rxd___lsb 21
+#define reg_ser_r_stat_din___rxd___width 1
+#define reg_ser_r_stat_din___rxd___bit 21
+#define reg_ser_r_stat_din___tr_idle___lsb 22
+#define reg_ser_r_stat_din___tr_idle___width 1
+#define reg_ser_r_stat_din___tr_idle___bit 22
+#define reg_ser_r_stat_din___tr_empty___lsb 23
+#define reg_ser_r_stat_din___tr_empty___width 1
+#define reg_ser_r_stat_din___tr_empty___bit 23
+#define reg_ser_r_stat_din___tr_rdy___lsb 24
+#define reg_ser_r_stat_din___tr_rdy___width 1
+#define reg_ser_r_stat_din___tr_rdy___bit 24
+#define reg_ser_r_stat_din___cts_n___lsb 25
+#define reg_ser_r_stat_din___cts_n___width 1
+#define reg_ser_r_stat_din___cts_n___bit 25
+#define reg_ser_r_stat_din___xoff_detect___lsb 26
+#define reg_ser_r_stat_din___xoff_detect___width 1
+#define reg_ser_r_stat_din___xoff_detect___bit 26
+#define reg_ser_r_stat_din___rts_n___lsb 27
+#define reg_ser_r_stat_din___rts_n___width 1
+#define reg_ser_r_stat_din___rts_n___bit 27
+#define reg_ser_r_stat_din___txd___lsb 28
+#define reg_ser_r_stat_din___txd___width 1
+#define reg_ser_r_stat_din___txd___bit 28
+#define reg_ser_r_stat_din_offset 36
+
+/* Register rw_rec_eop, scope ser, type rw */
+#define reg_ser_rw_rec_eop___set___lsb 0
+#define reg_ser_rw_rec_eop___set___width 1
+#define reg_ser_rw_rec_eop___set___bit 0
+#define reg_ser_rw_rec_eop_offset 40
+
+/* Register rw_intr_mask, scope ser, type rw */
+#define reg_ser_rw_intr_mask___tr_rdy___lsb 0
+#define reg_ser_rw_intr_mask___tr_rdy___width 1
+#define reg_ser_rw_intr_mask___tr_rdy___bit 0
+#define reg_ser_rw_intr_mask___tr_empty___lsb 1
+#define reg_ser_rw_intr_mask___tr_empty___width 1
+#define reg_ser_rw_intr_mask___tr_empty___bit 1
+#define reg_ser_rw_intr_mask___tr_idle___lsb 2
+#define reg_ser_rw_intr_mask___tr_idle___width 1
+#define reg_ser_rw_intr_mask___tr_idle___bit 2
+#define reg_ser_rw_intr_mask___dav___lsb 3
+#define reg_ser_rw_intr_mask___dav___width 1
+#define reg_ser_rw_intr_mask___dav___bit 3
+#define reg_ser_rw_intr_mask_offset 44
+
+/* Register rw_ack_intr, scope ser, type rw */
+#define reg_ser_rw_ack_intr___tr_rdy___lsb 0
+#define reg_ser_rw_ack_intr___tr_rdy___width 1
+#define reg_ser_rw_ack_intr___tr_rdy___bit 0
+#define reg_ser_rw_ack_intr___tr_empty___lsb 1
+#define reg_ser_rw_ack_intr___tr_empty___width 1
+#define reg_ser_rw_ack_intr___tr_empty___bit 1
+#define reg_ser_rw_ack_intr___tr_idle___lsb 2
+#define reg_ser_rw_ack_intr___tr_idle___width 1
+#define reg_ser_rw_ack_intr___tr_idle___bit 2
+#define reg_ser_rw_ack_intr___dav___lsb 3
+#define reg_ser_rw_ack_intr___dav___width 1
+#define reg_ser_rw_ack_intr___dav___bit 3
+#define reg_ser_rw_ack_intr_offset 48
+
+/* Register r_intr, scope ser, type r */
+#define reg_ser_r_intr___tr_rdy___lsb 0
+#define reg_ser_r_intr___tr_rdy___width 1
+#define reg_ser_r_intr___tr_rdy___bit 0
+#define reg_ser_r_intr___tr_empty___lsb 1
+#define reg_ser_r_intr___tr_empty___width 1
+#define reg_ser_r_intr___tr_empty___bit 1
+#define reg_ser_r_intr___tr_idle___lsb 2
+#define reg_ser_r_intr___tr_idle___width 1
+#define reg_ser_r_intr___tr_idle___bit 2
+#define reg_ser_r_intr___dav___lsb 3
+#define reg_ser_r_intr___dav___width 1
+#define reg_ser_r_intr___dav___bit 3
+#define reg_ser_r_intr_offset 52
+
+/* Register r_masked_intr, scope ser, type r */
+#define reg_ser_r_masked_intr___tr_rdy___lsb 0
+#define reg_ser_r_masked_intr___tr_rdy___width 1
+#define reg_ser_r_masked_intr___tr_rdy___bit 0
+#define reg_ser_r_masked_intr___tr_empty___lsb 1
+#define reg_ser_r_masked_intr___tr_empty___width 1
+#define reg_ser_r_masked_intr___tr_empty___bit 1
+#define reg_ser_r_masked_intr___tr_idle___lsb 2
+#define reg_ser_r_masked_intr___tr_idle___width 1
+#define reg_ser_r_masked_intr___tr_idle___bit 2
+#define reg_ser_r_masked_intr___dav___lsb 3
+#define reg_ser_r_masked_intr___dav___width 1
+#define reg_ser_r_masked_intr___dav___bit 3
+#define reg_ser_r_masked_intr_offset 56
+
+
+/* Constants */
+#define regk_ser_active                           0x00000000
+#define regk_ser_bits1                            0x00000000
+#define regk_ser_bits2                            0x00000001
+#define regk_ser_bits7                            0x00000001
+#define regk_ser_bits8                            0x00000000
+#define regk_ser_del0_5                           0x00000000
+#define regk_ser_del1                             0x00000001
+#define regk_ser_del1_5                           0x00000002
+#define regk_ser_del2                             0x00000003
+#define regk_ser_del2_5                           0x00000004
+#define regk_ser_del3                             0x00000005
+#define regk_ser_del3_5                           0x00000006
+#define regk_ser_del4                             0x00000007
+#define regk_ser_even                             0x00000000
+#define regk_ser_ext                              0x00000001
+#define regk_ser_f100                             0x00000007
+#define regk_ser_f29_493                          0x00000004
+#define regk_ser_f32                              0x00000005
+#define regk_ser_f32_768                          0x00000006
+#define regk_ser_ignore                           0x00000001
+#define regk_ser_inactive                         0x00000001
+#define regk_ser_majority                         0x00000001
+#define regk_ser_mark                             0x00000002
+#define regk_ser_middle                           0x00000000
+#define regk_ser_no                               0x00000000
+#define regk_ser_odd                              0x00000001
+#define regk_ser_off                              0x00000000
+#define regk_ser_rw_intr_mask_default             0x00000000
+#define regk_ser_rw_rec_baud_div_default          0x00000000
+#define regk_ser_rw_rec_ctrl_default              0x00010000
+#define regk_ser_rw_tr_baud_div_default           0x00000000
+#define regk_ser_rw_tr_ctrl_default               0x00008000
+#define regk_ser_rw_tr_dma_en_default             0x00000000
+#define regk_ser_rw_xoff_default                  0x00000000
+#define regk_ser_space                            0x00000003
+#define regk_ser_stop                             0x00000000
+#define regk_ser_yes                              0x00000001
+#endif /* __ser_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h

@@ -0,0 +1,462 @@
+#ifndef __sser_defs_asm_h
+#define __sser_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/syncser/rtl/sser_regs.r
+ *     id:           sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp
+ *     last modfied: Mon Apr 11 16:09:48 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/sser_defs_asm.h ../../inst/syncser/rtl/sser_regs.r
+ *      id: $Id: sser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_cfg, scope sser, type rw */
+#define reg_sser_rw_cfg___clk_div___lsb 0
+#define reg_sser_rw_cfg___clk_div___width 16
+#define reg_sser_rw_cfg___base_freq___lsb 16
+#define reg_sser_rw_cfg___base_freq___width 3
+#define reg_sser_rw_cfg___gate_clk___lsb 19
+#define reg_sser_rw_cfg___gate_clk___width 1
+#define reg_sser_rw_cfg___gate_clk___bit 19
+#define reg_sser_rw_cfg___clkgate_ctrl___lsb 20
+#define reg_sser_rw_cfg___clkgate_ctrl___width 1
+#define reg_sser_rw_cfg___clkgate_ctrl___bit 20
+#define reg_sser_rw_cfg___clkgate_in___lsb 21
+#define reg_sser_rw_cfg___clkgate_in___width 1
+#define reg_sser_rw_cfg___clkgate_in___bit 21
+#define reg_sser_rw_cfg___clk_dir___lsb 22
+#define reg_sser_rw_cfg___clk_dir___width 1
+#define reg_sser_rw_cfg___clk_dir___bit 22
+#define reg_sser_rw_cfg___clk_od_mode___lsb 23
+#define reg_sser_rw_cfg___clk_od_mode___width 1
+#define reg_sser_rw_cfg___clk_od_mode___bit 23
+#define reg_sser_rw_cfg___out_clk_pol___lsb 24
+#define reg_sser_rw_cfg___out_clk_pol___width 1
+#define reg_sser_rw_cfg___out_clk_pol___bit 24
+#define reg_sser_rw_cfg___out_clk_src___lsb 25
+#define reg_sser_rw_cfg___out_clk_src___width 2
+#define reg_sser_rw_cfg___clk_in_sel___lsb 27
+#define reg_sser_rw_cfg___clk_in_sel___width 1
+#define reg_sser_rw_cfg___clk_in_sel___bit 27
+#define reg_sser_rw_cfg___hold_pol___lsb 28
+#define reg_sser_rw_cfg___hold_pol___width 1
+#define reg_sser_rw_cfg___hold_pol___bit 28
+#define reg_sser_rw_cfg___prepare___lsb 29
+#define reg_sser_rw_cfg___prepare___width 1
+#define reg_sser_rw_cfg___prepare___bit 29
+#define reg_sser_rw_cfg___en___lsb 30
+#define reg_sser_rw_cfg___en___width 1
+#define reg_sser_rw_cfg___en___bit 30
+#define reg_sser_rw_cfg_offset 0
+
+/* Register rw_frm_cfg, scope sser, type rw */
+#define reg_sser_rw_frm_cfg___wordrate___lsb 0
+#define reg_sser_rw_frm_cfg___wordrate___width 10
+#define reg_sser_rw_frm_cfg___rec_delay___lsb 10
+#define reg_sser_rw_frm_cfg___rec_delay___width 3
+#define reg_sser_rw_frm_cfg___tr_delay___lsb 13
+#define reg_sser_rw_frm_cfg___tr_delay___width 3
+#define reg_sser_rw_frm_cfg___early_wend___lsb 16
+#define reg_sser_rw_frm_cfg___early_wend___width 1
+#define reg_sser_rw_frm_cfg___early_wend___bit 16
+#define reg_sser_rw_frm_cfg___level___lsb 17
+#define reg_sser_rw_frm_cfg___level___width 2
+#define reg_sser_rw_frm_cfg___type___lsb 19
+#define reg_sser_rw_frm_cfg___type___width 1
+#define reg_sser_rw_frm_cfg___type___bit 19
+#define reg_sser_rw_frm_cfg___clk_pol___lsb 20
+#define reg_sser_rw_frm_cfg___clk_pol___width 1
+#define reg_sser_rw_frm_cfg___clk_pol___bit 20
+#define reg_sser_rw_frm_cfg___fr_in_rxclk___lsb 21
+#define reg_sser_rw_frm_cfg___fr_in_rxclk___width 1
+#define reg_sser_rw_frm_cfg___fr_in_rxclk___bit 21
+#define reg_sser_rw_frm_cfg___clk_src___lsb 22
+#define reg_sser_rw_frm_cfg___clk_src___width 1
+#define reg_sser_rw_frm_cfg___clk_src___bit 22
+#define reg_sser_rw_frm_cfg___out_off___lsb 23
+#define reg_sser_rw_frm_cfg___out_off___width 1
+#define reg_sser_rw_frm_cfg___out_off___bit 23
+#define reg_sser_rw_frm_cfg___out_on___lsb 24
+#define reg_sser_rw_frm_cfg___out_on___width 1
+#define reg_sser_rw_frm_cfg___out_on___bit 24
+#define reg_sser_rw_frm_cfg___frame_pin_dir___lsb 25
+#define reg_sser_rw_frm_cfg___frame_pin_dir___width 1
+#define reg_sser_rw_frm_cfg___frame_pin_dir___bit 25
+#define reg_sser_rw_frm_cfg___frame_pin_use___lsb 26
+#define reg_sser_rw_frm_cfg___frame_pin_use___width 2
+#define reg_sser_rw_frm_cfg___status_pin_dir___lsb 28
+#define reg_sser_rw_frm_cfg___status_pin_dir___width 1
+#define reg_sser_rw_frm_cfg___status_pin_dir___bit 28
+#define reg_sser_rw_frm_cfg___status_pin_use___lsb 29
+#define reg_sser_rw_frm_cfg___status_pin_use___width 2
+#define reg_sser_rw_frm_cfg_offset 4
+
+/* Register rw_tr_cfg, scope sser, type rw */
+#define reg_sser_rw_tr_cfg___tr_en___lsb 0
+#define reg_sser_rw_tr_cfg___tr_en___width 1
+#define reg_sser_rw_tr_cfg___tr_en___bit 0
+#define reg_sser_rw_tr_cfg___stop___lsb 1
+#define reg_sser_rw_tr_cfg___stop___width 1
+#define reg_sser_rw_tr_cfg___stop___bit 1
+#define reg_sser_rw_tr_cfg___urun_stop___lsb 2
+#define reg_sser_rw_tr_cfg___urun_stop___width 1
+#define reg_sser_rw_tr_cfg___urun_stop___bit 2
+#define reg_sser_rw_tr_cfg___eop_stop___lsb 3
+#define reg_sser_rw_tr_cfg___eop_stop___width 1
+#define reg_sser_rw_tr_cfg___eop_stop___bit 3
+#define reg_sser_rw_tr_cfg___sample_size___lsb 4
+#define reg_sser_rw_tr_cfg___sample_size___width 6
+#define reg_sser_rw_tr_cfg___sh_dir___lsb 10
+#define reg_sser_rw_tr_cfg___sh_dir___width 1
+#define reg_sser_rw_tr_cfg___sh_dir___bit 10
+#define reg_sser_rw_tr_cfg___clk_pol___lsb 11
+#define reg_sser_rw_tr_cfg___clk_pol___width 1
+#define reg_sser_rw_tr_cfg___clk_pol___bit 11
+#define reg_sser_rw_tr_cfg___clk_src___lsb 12
+#define reg_sser_rw_tr_cfg___clk_src___width 1
+#define reg_sser_rw_tr_cfg___clk_src___bit 12
+#define reg_sser_rw_tr_cfg___use_dma___lsb 13
+#define reg_sser_rw_tr_cfg___use_dma___width 1
+#define reg_sser_rw_tr_cfg___use_dma___bit 13
+#define reg_sser_rw_tr_cfg___mode___lsb 14
+#define reg_sser_rw_tr_cfg___mode___width 2
+#define reg_sser_rw_tr_cfg___frm_src___lsb 16
+#define reg_sser_rw_tr_cfg___frm_src___width 1
+#define reg_sser_rw_tr_cfg___frm_src___bit 16
+#define reg_sser_rw_tr_cfg___use60958___lsb 17
+#define reg_sser_rw_tr_cfg___use60958___width 1
+#define reg_sser_rw_tr_cfg___use60958___bit 17
+#define reg_sser_rw_tr_cfg___iec60958_ckdiv___lsb 18
+#define reg_sser_rw_tr_cfg___iec60958_ckdiv___width 2
+#define reg_sser_rw_tr_cfg___rate_ctrl___lsb 20
+#define reg_sser_rw_tr_cfg___rate_ctrl___width 1
+#define reg_sser_rw_tr_cfg___rate_ctrl___bit 20
+#define reg_sser_rw_tr_cfg___use_md___lsb 21
+#define reg_sser_rw_tr_cfg___use_md___width 1
+#define reg_sser_rw_tr_cfg___use_md___bit 21
+#define reg_sser_rw_tr_cfg___dual_i2s___lsb 22
+#define reg_sser_rw_tr_cfg___dual_i2s___width 1
+#define reg_sser_rw_tr_cfg___dual_i2s___bit 22
+#define reg_sser_rw_tr_cfg___data_pin_use___lsb 23
+#define reg_sser_rw_tr_cfg___data_pin_use___width 2
+#define reg_sser_rw_tr_cfg___od_mode___lsb 25
+#define reg_sser_rw_tr_cfg___od_mode___width 1
+#define reg_sser_rw_tr_cfg___od_mode___bit 25
+#define reg_sser_rw_tr_cfg___bulk_wspace___lsb 26
+#define reg_sser_rw_tr_cfg___bulk_wspace___width 2
+#define reg_sser_rw_tr_cfg_offset 8
+
+/* Register rw_rec_cfg, scope sser, type rw */
+#define reg_sser_rw_rec_cfg___rec_en___lsb 0
+#define reg_sser_rw_rec_cfg___rec_en___width 1
+#define reg_sser_rw_rec_cfg___rec_en___bit 0
+#define reg_sser_rw_rec_cfg___force_eop___lsb 1
+#define reg_sser_rw_rec_cfg___force_eop___width 1
+#define reg_sser_rw_rec_cfg___force_eop___bit 1
+#define reg_sser_rw_rec_cfg___stop___lsb 2
+#define reg_sser_rw_rec_cfg___stop___width 1
+#define reg_sser_rw_rec_cfg___stop___bit 2
+#define reg_sser_rw_rec_cfg___orun_stop___lsb 3
+#define reg_sser_rw_rec_cfg___orun_stop___width 1
+#define reg_sser_rw_rec_cfg___orun_stop___bit 3
+#define reg_sser_rw_rec_cfg___eop_stop___lsb 4
+#define reg_sser_rw_rec_cfg___eop_stop___width 1
+#define reg_sser_rw_rec_cfg___eop_stop___bit 4
+#define reg_sser_rw_rec_cfg___sample_size___lsb 5
+#define reg_sser_rw_rec_cfg___sample_size___width 6
+#define reg_sser_rw_rec_cfg___sh_dir___lsb 11
+#define reg_sser_rw_rec_cfg___sh_dir___width 1
+#define reg_sser_rw_rec_cfg___sh_dir___bit 11
+#define reg_sser_rw_rec_cfg___clk_pol___lsb 12
+#define reg_sser_rw_rec_cfg___clk_pol___width 1
+#define reg_sser_rw_rec_cfg___clk_pol___bit 12
+#define reg_sser_rw_rec_cfg___clk_src___lsb 13
+#define reg_sser_rw_rec_cfg___clk_src___width 1
+#define reg_sser_rw_rec_cfg___clk_src___bit 13
+#define reg_sser_rw_rec_cfg___use_dma___lsb 14
+#define reg_sser_rw_rec_cfg___use_dma___width 1
+#define reg_sser_rw_rec_cfg___use_dma___bit 14
+#define reg_sser_rw_rec_cfg___mode___lsb 15
+#define reg_sser_rw_rec_cfg___mode___width 2
+#define reg_sser_rw_rec_cfg___frm_src___lsb 17
+#define reg_sser_rw_rec_cfg___frm_src___width 2
+#define reg_sser_rw_rec_cfg___use60958___lsb 19
+#define reg_sser_rw_rec_cfg___use60958___width 1
+#define reg_sser_rw_rec_cfg___use60958___bit 19
+#define reg_sser_rw_rec_cfg___iec60958_ui_len___lsb 20
+#define reg_sser_rw_rec_cfg___iec60958_ui_len___width 5
+#define reg_sser_rw_rec_cfg___slave2_en___lsb 25
+#define reg_sser_rw_rec_cfg___slave2_en___width 1
+#define reg_sser_rw_rec_cfg___slave2_en___bit 25
+#define reg_sser_rw_rec_cfg___slave3_en___lsb 26
+#define reg_sser_rw_rec_cfg___slave3_en___width 1
+#define reg_sser_rw_rec_cfg___slave3_en___bit 26
+#define reg_sser_rw_rec_cfg___fifo_thr___lsb 27
+#define reg_sser_rw_rec_cfg___fifo_thr___width 2
+#define reg_sser_rw_rec_cfg_offset 12
+
+/* Register rw_tr_data, scope sser, type rw */
+#define reg_sser_rw_tr_data___data___lsb 0
+#define reg_sser_rw_tr_data___data___width 16
+#define reg_sser_rw_tr_data___md___lsb 16
+#define reg_sser_rw_tr_data___md___width 1
+#define reg_sser_rw_tr_data___md___bit 16
+#define reg_sser_rw_tr_data_offset 16
+
+/* Register r_rec_data, scope sser, type r */
+#define reg_sser_r_rec_data___data___lsb 0
+#define reg_sser_r_rec_data___data___width 16
+#define reg_sser_r_rec_data___md___lsb 16
+#define reg_sser_r_rec_data___md___width 1
+#define reg_sser_r_rec_data___md___bit 16
+#define reg_sser_r_rec_data___ext_clk___lsb 17
+#define reg_sser_r_rec_data___ext_clk___width 1
+#define reg_sser_r_rec_data___ext_clk___bit 17
+#define reg_sser_r_rec_data___status_in___lsb 18
+#define reg_sser_r_rec_data___status_in___width 1
+#define reg_sser_r_rec_data___status_in___bit 18
+#define reg_sser_r_rec_data___frame_in___lsb 19
+#define reg_sser_r_rec_data___frame_in___width 1
+#define reg_sser_r_rec_data___frame_in___bit 19
+#define reg_sser_r_rec_data___din___lsb 20
+#define reg_sser_r_rec_data___din___width 1
+#define reg_sser_r_rec_data___din___bit 20
+#define reg_sser_r_rec_data___data_in___lsb 21
+#define reg_sser_r_rec_data___data_in___width 1
+#define reg_sser_r_rec_data___data_in___bit 21
+#define reg_sser_r_rec_data___clk_in___lsb 22
+#define reg_sser_r_rec_data___clk_in___width 1
+#define reg_sser_r_rec_data___clk_in___bit 22
+#define reg_sser_r_rec_data_offset 20
+
+/* Register rw_extra, scope sser, type rw */
+#define reg_sser_rw_extra___clkoff_cycles___lsb 0
+#define reg_sser_rw_extra___clkoff_cycles___width 20
+#define reg_sser_rw_extra___clkoff_en___lsb 20
+#define reg_sser_rw_extra___clkoff_en___width 1
+#define reg_sser_rw_extra___clkoff_en___bit 20
+#define reg_sser_rw_extra___clkon_en___lsb 21
+#define reg_sser_rw_extra___clkon_en___width 1
+#define reg_sser_rw_extra___clkon_en___bit 21
+#define reg_sser_rw_extra___dout_delay___lsb 22
+#define reg_sser_rw_extra___dout_delay___width 5
+#define reg_sser_rw_extra_offset 24
+
+/* Register rw_intr_mask, scope sser, type rw */
+#define reg_sser_rw_intr_mask___trdy___lsb 0
+#define reg_sser_rw_intr_mask___trdy___width 1
+#define reg_sser_rw_intr_mask___trdy___bit 0
+#define reg_sser_rw_intr_mask___rdav___lsb 1
+#define reg_sser_rw_intr_mask___rdav___width 1
+#define reg_sser_rw_intr_mask___rdav___bit 1
+#define reg_sser_rw_intr_mask___tidle___lsb 2
+#define reg_sser_rw_intr_mask___tidle___width 1
+#define reg_sser_rw_intr_mask___tidle___bit 2
+#define reg_sser_rw_intr_mask___rstop___lsb 3
+#define reg_sser_rw_intr_mask___rstop___width 1
+#define reg_sser_rw_intr_mask___rstop___bit 3
+#define reg_sser_rw_intr_mask___urun___lsb 4
+#define reg_sser_rw_intr_mask___urun___width 1
+#define reg_sser_rw_intr_mask___urun___bit 4
+#define reg_sser_rw_intr_mask___orun___lsb 5
+#define reg_sser_rw_intr_mask___orun___width 1
+#define reg_sser_rw_intr_mask___orun___bit 5
+#define reg_sser_rw_intr_mask___md_rec___lsb 6
+#define reg_sser_rw_intr_mask___md_rec___width 1
+#define reg_sser_rw_intr_mask___md_rec___bit 6
+#define reg_sser_rw_intr_mask___md_sent___lsb 7
+#define reg_sser_rw_intr_mask___md_sent___width 1
+#define reg_sser_rw_intr_mask___md_sent___bit 7
+#define reg_sser_rw_intr_mask___r958err___lsb 8
+#define reg_sser_rw_intr_mask___r958err___width 1
+#define reg_sser_rw_intr_mask___r958err___bit 8
+#define reg_sser_rw_intr_mask_offset 28
+
+/* Register rw_ack_intr, scope sser, type rw */
+#define reg_sser_rw_ack_intr___trdy___lsb 0
+#define reg_sser_rw_ack_intr___trdy___width 1
+#define reg_sser_rw_ack_intr___trdy___bit 0
+#define reg_sser_rw_ack_intr___rdav___lsb 1
+#define reg_sser_rw_ack_intr___rdav___width 1
+#define reg_sser_rw_ack_intr___rdav___bit 1
+#define reg_sser_rw_ack_intr___tidle___lsb 2
+#define reg_sser_rw_ack_intr___tidle___width 1
+#define reg_sser_rw_ack_intr___tidle___bit 2
+#define reg_sser_rw_ack_intr___rstop___lsb 3
+#define reg_sser_rw_ack_intr___rstop___width 1
+#define reg_sser_rw_ack_intr___rstop___bit 3
+#define reg_sser_rw_ack_intr___urun___lsb 4
+#define reg_sser_rw_ack_intr___urun___width 1
+#define reg_sser_rw_ack_intr___urun___bit 4
+#define reg_sser_rw_ack_intr___orun___lsb 5
+#define reg_sser_rw_ack_intr___orun___width 1
+#define reg_sser_rw_ack_intr___orun___bit 5
+#define reg_sser_rw_ack_intr___md_rec___lsb 6
+#define reg_sser_rw_ack_intr___md_rec___width 1
+#define reg_sser_rw_ack_intr___md_rec___bit 6
+#define reg_sser_rw_ack_intr___md_sent___lsb 7
+#define reg_sser_rw_ack_intr___md_sent___width 1
+#define reg_sser_rw_ack_intr___md_sent___bit 7
+#define reg_sser_rw_ack_intr___r958err___lsb 8
+#define reg_sser_rw_ack_intr___r958err___width 1
+#define reg_sser_rw_ack_intr___r958err___bit 8
+#define reg_sser_rw_ack_intr_offset 32
+
+/* Register r_intr, scope sser, type r */
+#define reg_sser_r_intr___trdy___lsb 0
+#define reg_sser_r_intr___trdy___width 1
+#define reg_sser_r_intr___trdy___bit 0
+#define reg_sser_r_intr___rdav___lsb 1
+#define reg_sser_r_intr___rdav___width 1
+#define reg_sser_r_intr___rdav___bit 1
+#define reg_sser_r_intr___tidle___lsb 2
+#define reg_sser_r_intr___tidle___width 1
+#define reg_sser_r_intr___tidle___bit 2
+#define reg_sser_r_intr___rstop___lsb 3
+#define reg_sser_r_intr___rstop___width 1
+#define reg_sser_r_intr___rstop___bit 3
+#define reg_sser_r_intr___urun___lsb 4
+#define reg_sser_r_intr___urun___width 1
+#define reg_sser_r_intr___urun___bit 4
+#define reg_sser_r_intr___orun___lsb 5
+#define reg_sser_r_intr___orun___width 1
+#define reg_sser_r_intr___orun___bit 5
+#define reg_sser_r_intr___md_rec___lsb 6
+#define reg_sser_r_intr___md_rec___width 1
+#define reg_sser_r_intr___md_rec___bit 6
+#define reg_sser_r_intr___md_sent___lsb 7
+#define reg_sser_r_intr___md_sent___width 1
+#define reg_sser_r_intr___md_sent___bit 7
+#define reg_sser_r_intr___r958err___lsb 8
+#define reg_sser_r_intr___r958err___width 1
+#define reg_sser_r_intr___r958err___bit 8
+#define reg_sser_r_intr_offset 36
+
+/* Register r_masked_intr, scope sser, type r */
+#define reg_sser_r_masked_intr___trdy___lsb 0
+#define reg_sser_r_masked_intr___trdy___width 1
+#define reg_sser_r_masked_intr___trdy___bit 0
+#define reg_sser_r_masked_intr___rdav___lsb 1
+#define reg_sser_r_masked_intr___rdav___width 1
+#define reg_sser_r_masked_intr___rdav___bit 1
+#define reg_sser_r_masked_intr___tidle___lsb 2
+#define reg_sser_r_masked_intr___tidle___width 1
+#define reg_sser_r_masked_intr___tidle___bit 2
+#define reg_sser_r_masked_intr___rstop___lsb 3
+#define reg_sser_r_masked_intr___rstop___width 1
+#define reg_sser_r_masked_intr___rstop___bit 3
+#define reg_sser_r_masked_intr___urun___lsb 4
+#define reg_sser_r_masked_intr___urun___width 1
+#define reg_sser_r_masked_intr___urun___bit 4
+#define reg_sser_r_masked_intr___orun___lsb 5
+#define reg_sser_r_masked_intr___orun___width 1
+#define reg_sser_r_masked_intr___orun___bit 5
+#define reg_sser_r_masked_intr___md_rec___lsb 6
+#define reg_sser_r_masked_intr___md_rec___width 1
+#define reg_sser_r_masked_intr___md_rec___bit 6
+#define reg_sser_r_masked_intr___md_sent___lsb 7
+#define reg_sser_r_masked_intr___md_sent___width 1
+#define reg_sser_r_masked_intr___md_sent___bit 7
+#define reg_sser_r_masked_intr___r958err___lsb 8
+#define reg_sser_r_masked_intr___r958err___width 1
+#define reg_sser_r_masked_intr___r958err___bit 8
+#define reg_sser_r_masked_intr_offset 40
+
+
+/* Constants */
+#define regk_sser_both                            0x00000002
+#define regk_sser_bulk                            0x00000001
+#define regk_sser_clk100                          0x00000000
+#define regk_sser_clk_in                          0x00000000
+#define regk_sser_const0                          0x00000003
+#define regk_sser_dout                            0x00000002
+#define regk_sser_edge                            0x00000000
+#define regk_sser_ext                             0x00000001
+#define regk_sser_ext_clk                         0x00000001
+#define regk_sser_f100                            0x00000000
+#define regk_sser_f29_493                         0x00000004
+#define regk_sser_f32                             0x00000005
+#define regk_sser_f32_768                         0x00000006
+#define regk_sser_frm                             0x00000003
+#define regk_sser_gio0                            0x00000000
+#define regk_sser_gio1                            0x00000001
+#define regk_sser_hispeed                         0x00000001
+#define regk_sser_hold                            0x00000002
+#define regk_sser_in                              0x00000000
+#define regk_sser_inf                             0x00000003
+#define regk_sser_intern                          0x00000000
+#define regk_sser_intern_clk                      0x00000001
+#define regk_sser_intern_tb                       0x00000000
+#define regk_sser_iso                             0x00000000
+#define regk_sser_level                           0x00000001
+#define regk_sser_lospeed                         0x00000000
+#define regk_sser_lsbfirst                        0x00000000
+#define regk_sser_msbfirst                        0x00000001
+#define regk_sser_neg                             0x00000001
+#define regk_sser_neg_lo                          0x00000000
+#define regk_sser_no                              0x00000000
+#define regk_sser_no_clk                          0x00000007
+#define regk_sser_nojitter                        0x00000002
+#define regk_sser_out                             0x00000001
+#define regk_sser_pos                             0x00000000
+#define regk_sser_pos_hi                          0x00000001
+#define regk_sser_rec                             0x00000000
+#define regk_sser_rw_cfg_default                  0x00000000
+#define regk_sser_rw_extra_default                0x00000000
+#define regk_sser_rw_frm_cfg_default              0x00000000
+#define regk_sser_rw_intr_mask_default            0x00000000
+#define regk_sser_rw_rec_cfg_default              0x00000000
+#define regk_sser_rw_tr_cfg_default               0x01800000
+#define regk_sser_rw_tr_data_default              0x00000000
+#define regk_sser_thr16                           0x00000001
+#define regk_sser_thr32                           0x00000002
+#define regk_sser_thr8                            0x00000000
+#define regk_sser_tr                              0x00000001
+#define regk_sser_ts_out                          0x00000003
+#define regk_sser_tx_bulk                         0x00000002
+#define regk_sser_wiresave                        0x00000002
+#define regk_sser_yes                             0x00000001
+#endif /* __sser_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h

@@ -0,0 +1,84 @@
+#ifndef __strcop_defs_asm_h
+#define __strcop_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/strcop/rtl/strcop_regs.r
+ *     id:           strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp
+ *     last modfied: Mon Apr 11 16:09:38 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strcop_defs_asm.h ../../inst/strcop/rtl/strcop_regs.r
+ *      id: $Id: strcop_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_cfg, scope strcop, type rw */
+#define reg_strcop_rw_cfg___td3___lsb 0
+#define reg_strcop_rw_cfg___td3___width 1
+#define reg_strcop_rw_cfg___td3___bit 0
+#define reg_strcop_rw_cfg___td2___lsb 1
+#define reg_strcop_rw_cfg___td2___width 1
+#define reg_strcop_rw_cfg___td2___bit 1
+#define reg_strcop_rw_cfg___td1___lsb 2
+#define reg_strcop_rw_cfg___td1___width 1
+#define reg_strcop_rw_cfg___td1___bit 2
+#define reg_strcop_rw_cfg___ipend___lsb 3
+#define reg_strcop_rw_cfg___ipend___width 1
+#define reg_strcop_rw_cfg___ipend___bit 3
+#define reg_strcop_rw_cfg___ignore_sync___lsb 4
+#define reg_strcop_rw_cfg___ignore_sync___width 1
+#define reg_strcop_rw_cfg___ignore_sync___bit 4
+#define reg_strcop_rw_cfg___en___lsb 5
+#define reg_strcop_rw_cfg___en___width 1
+#define reg_strcop_rw_cfg___en___bit 5
+#define reg_strcop_rw_cfg_offset 0
+
+
+/* Constants */
+#define regk_strcop_big                           0x00000001
+#define regk_strcop_d                             0x00000001
+#define regk_strcop_e                             0x00000000
+#define regk_strcop_little                        0x00000000
+#define regk_strcop_rw_cfg_default                0x00000002
+#endif /* __strcop_defs_asm_h */

include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h

@@ -0,0 +1,100 @@
+#ifndef __strmux_defs_asm_h
+#define __strmux_defs_asm_h
+
+/*
+ * This file is autogenerated from
+ *   file:           ../../inst/strmux/rtl/guinness/strmux_regs.r
+ *     id:           strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp
+ *     last modfied: Mon Apr 11 16:09:43 2005
+ *
+ *   by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strmux_defs_asm.h ../../inst/strmux/rtl/guinness/strmux_regs.r
+ *      id: $Id: strmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $
+ * Any changes here will be lost.
+ *
+ * -*- buffer-read-only: t -*-
+ */
+
+#ifndef REG_FIELD
+#define REG_FIELD( scope, reg, field, value ) \
+  REG_FIELD_X_( value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_FIELD_X_( value, shift ) ((value) << shift)
+#endif
+
+#ifndef REG_STATE
+#define REG_STATE( scope, reg, field, symbolic_value ) \
+  REG_STATE_X_( regk_##scope##_##symbolic_value, reg_##scope##_##reg##___##field##___lsb )
+#define REG_STATE_X_( k, shift ) (k << shift)
+#endif
+
+#ifndef REG_MASK
+#define REG_MASK( scope, reg, field ) \
+  REG_MASK_X_( reg_##scope##_##reg##___##field##___width, reg_##scope##_##reg##___##field##___lsb )
+#define REG_MASK_X_( width, lsb ) (((1 << width)-1) << lsb)
+#endif
+
+#ifndef REG_LSB
+#define REG_LSB( scope, reg, field ) reg_##scope##_##reg##___##field##___lsb
+#endif
+
+#ifndef REG_BIT
+#define REG_BIT( scope, reg, field ) reg_##scope##_##reg##___##field##___bit
+#endif
+
+#ifndef REG_ADDR
+#define REG_ADDR( scope, inst, reg ) REG_ADDR_X_(inst, reg_##scope##_##reg##_offset)
+#define REG_ADDR_X_( inst, offs ) ((inst) + offs)
+#endif
+
+#ifndef REG_ADDR_VECT
+#define REG_ADDR_VECT( scope, inst, reg, index ) \
+         REG_ADDR_VECT_X_(inst, reg_##scope##_##reg##_offset, index, \
+			 STRIDE_##scope##_##reg )
+#define REG_ADDR_VECT_X_( inst, offs, index, stride ) \
+                          ((inst) + offs + (index) * stride)
+#endif
+
+/* Register rw_cfg, scope strmux, type rw */
+#define reg_strmux_rw_cfg___dma0___lsb 0
+#define reg_strmux_rw_cfg___dma0___width 3
+#define reg_strmux_rw_cfg___dma1___lsb 3
+#define reg_strmux_rw_cfg___dma1___width 3
+#define reg_strmux_rw_cfg___dma2___lsb 6
+#define reg_strmux_rw_cfg___dma2___width 3
+#define reg_strmux_rw_cfg___dma3___lsb 9
+#define reg_strmux_rw_cfg___dma3___width 3
+#define reg_strmux_rw_cfg___dma4___lsb 12
+#define reg_strmux_rw_cfg___dma4___width 3
+#define reg_strmux_rw_cfg___dma5___lsb 15
+#define reg_strmux_rw_cfg___dma5___width 3
+#define reg_strmux_rw_cfg___dma6___lsb 18
+#define reg_strmux_rw_cfg___dma6___width 3
+#define reg_strmux_rw_cfg___dma7___lsb 21
+#define reg_strmux_rw_cfg___dma7___width 3
+#define reg_strmux_rw_cfg___dma8___lsb 24
+#define reg_strmux_rw_cfg___dma8___width 3
+#define reg_strmux_rw_cfg___dma9___lsb 27
+#define reg_strmux_rw_cfg___dma9___width 3
+#define reg_strmux_rw_cfg_offset 0
+
+
+/* Constants */
+#define regk_strmux_ata                           0x00000003
+#define regk_strmux_eth0                          0x00000001
+#define regk_strmux_eth1                          0x00000004
+#define regk_strmux_ext0                          0x00000001
+#define regk_strmux_ext1                          0x00000001
+#define regk_strmux_ext2                          0x00000001
+#define regk_strmux_ext3                          0x00000001
+#define regk_strmux_iop0                          0x00000002
+#define regk_strmux_iop1                          0x00000001
+#define regk_strmux_off                           0x00000000
+#define regk_strmux_p21                           0x00000004
+#define regk_strmux_rw_cfg_default                0x00000000
+#define regk_strmux_ser0                          0x00000002
+#define regk_strmux_ser1                          0x00000002
+#define regk_strmux_ser2                          0x00000004
+#define regk_strmux_ser3                          0x00000003
+#define regk_strmux_sser0                         0x00000003
+#define regk_strmux_sser1                         0x00000003
+#define regk_strmux_strcop                        0x00000002
+#endif /* __strmux_defs_asm_h */