From 5130af35bf34e7b57e86c7f72c08b8c68adbb425 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 3 Jun 2013 12:13:18 +0200 Subject: [PATCH] video: xilinxfb: Rename PLB_ACCESS_FLAG to BUS_ACCESS_FLAG Using only PLB name is wrong for a long time because the same access functions are also used for AXI. s/PLB/BUS/g Signed-off-by: Michal Simek Acked-by: Arnd Bergmann Signed-off-by: Tomi Valkeinen --- drivers/video/xilinxfb.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index c9b442b928e5..d94c99280144 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -44,7 +44,7 @@ /* - * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for + * Xilinx calls it "TFT LCD Controller" though it can also be used for * the VGA port on the Xilinx ML40x board. This is a hardware display * controller for a 640x480 resolution TFT or VGA screen. * @@ -54,11 +54,11 @@ * don't start thinking about scrolling). The second allows the LCD to * be turned on or off as well as rotated 180 degrees. * - * In case of direct PLB access the second control register will be at + * In case of direct BUS access the second control register will be at * an offset of 4 as compared to the DCR access where the offset is 1 * i.e. REG_CTRL. So this is taken care in the function * xilinx_fb_out32 where it left shifts the offset 2 times in case of - * direct PLB access. + * direct BUS access. */ #define NUM_REGS 2 #define REG_FB_ADDR 0 @@ -116,7 +116,7 @@ static struct fb_var_screeninfo xilinx_fb_var = { }; -#define PLB_ACCESS_FLAG 0x1 /* 1 = PLB, 0 = DCR */ +#define BUS_ACCESS_FLAG 0x1 /* 1 = BUS, 0 = DCR */ struct xilinxfb_drvdata { @@ -146,14 +146,14 @@ struct xilinxfb_drvdata { container_of(_info, struct xilinxfb_drvdata, info) /* - * The XPS TFT Controller can be accessed through PLB or DCR interface. + * The XPS TFT Controller can be accessed through BUS or DCR interface. * To perform the read/write on the registers we need to check on * which bus its connected and call the appropriate write API. */ static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset, u32 val) { - if (drvdata->flags & PLB_ACCESS_FLAG) + if (drvdata->flags & BUS_ACCESS_FLAG) out_be32(drvdata->regs + (offset << 2), val); #ifdef CONFIG_PPC_DCR else @@ -235,10 +235,10 @@ static int xilinxfb_assign(struct device *dev, int rc; int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; - if (drvdata->flags & PLB_ACCESS_FLAG) { + if (drvdata->flags & BUS_ACCESS_FLAG) { /* * Map the control registers in if the controller - * is on direct PLB interface. + * is on direct BUS interface. */ if (!request_mem_region(physaddr, 8, DRIVER_NAME)) { dev_err(dev, "Couldn't lock memory region at 0x%08lX\n", @@ -270,7 +270,7 @@ static int xilinxfb_assign(struct device *dev, if (!drvdata->fb_virt) { dev_err(dev, "Could not allocate frame buffer memory\n"); rc = -ENOMEM; - if (drvdata->flags & PLB_ACCESS_FLAG) + if (drvdata->flags & BUS_ACCESS_FLAG) goto err_fbmem; else goto err_region; @@ -323,7 +323,7 @@ static int xilinxfb_assign(struct device *dev, goto err_regfb; } - if (drvdata->flags & PLB_ACCESS_FLAG) { + if (drvdata->flags & BUS_ACCESS_FLAG) { /* Put a banner in the log (for DEBUG) */ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs); @@ -348,11 +348,11 @@ static int xilinxfb_assign(struct device *dev, xilinx_fb_out32(drvdata, REG_CTRL, 0); err_fbmem: - if (drvdata->flags & PLB_ACCESS_FLAG) + if (drvdata->flags & BUS_ACCESS_FLAG) iounmap(drvdata->regs); err_map: - if (drvdata->flags & PLB_ACCESS_FLAG) + if (drvdata->flags & BUS_ACCESS_FLAG) release_mem_region(physaddr, 8); err_region: @@ -384,7 +384,7 @@ static int xilinxfb_release(struct device *dev) xilinx_fb_out32(drvdata, REG_CTRL, 0); /* Release the resources, as allocated based on interface */ - if (drvdata->flags & PLB_ACCESS_FLAG) { + if (drvdata->flags & BUS_ACCESS_FLAG) { iounmap(drvdata->regs); release_mem_region(drvdata->regs_phys, 8); } @@ -423,18 +423,18 @@ static int xilinxfb_of_probe(struct platform_device *op) } /* - * To check whether the core is connected directly to DCR or PLB + * To check whether the core is connected directly to DCR or BUS * interface and initialize the tft_access accordingly. */ of_property_read_u32(op->dev.of_node, "xlnx,dcr-splb-slave-if", &tft_access); /* - * Fill the resource structure if its direct PLB interface + * Fill the resource structure if its direct BUS interface * otherwise fill the dcr_host structure. */ if (tft_access) { - drvdata->flags |= PLB_ACCESS_FLAG; + drvdata->flags |= BUS_ACCESS_FLAG; rc = of_address_to_resource(op->dev.of_node, 0, &res); if (rc) { dev_err(&op->dev, "invalid address\n");