ARM: mx3: Fix a race condition in mxcmmc
From cefcdab08d1c9636c4a7290bc2bbe937d051bce4 Mon Sep 17 00:00:00 2001 From: Volker Ernst <volker.ernst@txtr.com> Date: Mon, 26 Apr 2010 22:51:07 +0200 Subject: [PATCH] ARM: mx3: Fix a race condition in mxcmmc This fixes a race condition regarding interrupt bits in the SDHC controller driver code. In case of PIO-transfer it does not clear SDHC-status bit#11/12 in the INT-handler anymore. INT-handler might be called during an ongoing PIO-data-transfer (with some other INT-flag set) and PIO-transfer depends on these bits being set to detect the end of the data-transfer. This also means that at the end of PIO- transfer that PIO-software has to clear these bits itself. However in case of DMA-transfer these bits have to be cleared in the INT-handler, because they are used to generate INTs then. Works solid, no more problems here, can transfer big files. Signed-off-by: Volker Ernst <volker.ernst@txtr.com> Acked-by: Daniel Mack <daniel@caiaq.de> Cc: Andy Green <andy@warmcat.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
parent
a2ef4562c2
commit
4a31f2eff3
1 changed files with 12 additions and 1 deletions
|
@ -489,6 +489,9 @@ static void mxcmci_datawork(struct work_struct *work)
|
|||
struct mxcmci_host *host = container_of(work, struct mxcmci_host,
|
||||
datawork);
|
||||
int datastat = mxcmci_transfer_data(host);
|
||||
|
||||
writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
|
||||
host->base + MMC_REG_STATUS);
|
||||
mxcmci_finish_data(host, datastat);
|
||||
|
||||
if (host->req->stop) {
|
||||
|
@ -553,7 +556,8 @@ static irqreturn_t mxcmci_irq(int irq, void *devid)
|
|||
u32 stat;
|
||||
|
||||
stat = readl(host->base + MMC_REG_STATUS);
|
||||
writel(stat & ~STATUS_SDIO_INT_ACTIVE, host->base + MMC_REG_STATUS);
|
||||
writel(stat & ~(STATUS_SDIO_INT_ACTIVE | STATUS_DATA_TRANS_DONE |
|
||||
STATUS_WRITE_OP_DONE), host->base + MMC_REG_STATUS);
|
||||
|
||||
dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
|
||||
|
||||
|
@ -561,6 +565,13 @@ static irqreturn_t mxcmci_irq(int irq, void *devid)
|
|||
sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio;
|
||||
spin_unlock_irqrestore(&host->lock, flags);
|
||||
|
||||
#ifdef HAS_DMA
|
||||
if (mxcmci_use_dma(host) &&
|
||||
(stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE)))
|
||||
writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
|
||||
host->base + MMC_REG_STATUS);
|
||||
#endif
|
||||
|
||||
if (sdio_irq) {
|
||||
writel(STATUS_SDIO_INT_ACTIVE, host->base + MMC_REG_STATUS);
|
||||
mmc_signal_sdio_irq(host->mmc);
|
||||
|
|
Loading…
Reference in a new issue