Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver

Browse source 
This patch adds the Spreadtrum RTC driver, which embedded in the
Spreadtrum SC27xx series PMICs.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Baolin Wang 2017-11-09 11:34:17 +08:00 committed by Alexandre Belloni
parent 8f6596f4c9
commit 495bbde523
3 changed files with 674 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
drivers/rtc/Kconfig
View file

@ -1187,6 +1187,17 @@ config RTC_DRV_WM8350
This driver can also be built as a module. If so, the module
will be called "rtc-wm8350".
config RTC_DRV_SC27XX
tristate "Spreadtrum SC27xx RTC"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
If you say Y here you will get support for the RTC subsystem
of the Spreadtrum SC27xx series PMICs. The SC27xx series PMICs
includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
This driver can also be built as a module. If so, the module
will be called rtc-sc27xx.
config RTC_DRV_SPEAR
tristate "SPEAR ST RTC"
depends on PLAT_SPEAR || COMPILE_TEST

1
drivers/rtc/Makefile
View file

@ -145,6 +145,7 @@ obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o
obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o
obj-$(CONFIG_RTC_DRV_SC27XX) += rtc-sc27xx.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
obj-$(CONFIG_RTC_DRV_SIRFSOC) += rtc-sirfsoc.o
obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o

662
drivers/rtc/rtc-sc27xx.c Normal file
View file

@ -0,0 +1,662 @@
/*
* Copyright (C) 2017 Spreadtrum Communications Inc.
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#define SPRD_RTC_SEC_CNT_VALUE 0x0
#define SPRD_RTC_MIN_CNT_VALUE 0x4
#define SPRD_RTC_HOUR_CNT_VALUE 0x8
#define SPRD_RTC_DAY_CNT_VALUE 0xc
#define SPRD_RTC_SEC_CNT_UPD 0x10
#define SPRD_RTC_MIN_CNT_UPD 0x14
#define SPRD_RTC_HOUR_CNT_UPD 0x18
#define SPRD_RTC_DAY_CNT_UPD 0x1c
#define SPRD_RTC_SEC_ALM_UPD 0x20
#define SPRD_RTC_MIN_ALM_UPD 0x24
#define SPRD_RTC_HOUR_ALM_UPD 0x28
#define SPRD_RTC_DAY_ALM_UPD 0x2c
#define SPRD_RTC_INT_EN 0x30
#define SPRD_RTC_INT_RAW_STS 0x34
#define SPRD_RTC_INT_CLR 0x38
#define SPRD_RTC_INT_MASK_STS 0x3C
#define SPRD_RTC_SEC_ALM_VALUE 0x40
#define SPRD_RTC_MIN_ALM_VALUE 0x44
#define SPRD_RTC_HOUR_ALM_VALUE 0x48
#define SPRD_RTC_DAY_ALM_VALUE 0x4c
#define SPRD_RTC_SPG_VALUE 0x50
#define SPRD_RTC_SPG_UPD 0x54
#define SPRD_RTC_SEC_AUXALM_UPD 0x60
#define SPRD_RTC_MIN_AUXALM_UPD 0x64
#define SPRD_RTC_HOUR_AUXALM_UPD 0x68
#define SPRD_RTC_DAY_AUXALM_UPD 0x6c
/* BIT & MASK definition for SPRD_RTC_INT_* registers */
#define SPRD_RTC_SEC_EN BIT(0)
#define SPRD_RTC_MIN_EN BIT(1)
#define SPRD_RTC_HOUR_EN BIT(2)
#define SPRD_RTC_DAY_EN BIT(3)
#define SPRD_RTC_ALARM_EN BIT(4)
#define SPRD_RTC_HRS_FORMAT_EN BIT(5)
#define SPRD_RTC_AUXALM_EN BIT(6)
#define SPRD_RTC_SPG_UPD_EN BIT(7)
#define SPRD_RTC_SEC_UPD_EN BIT(8)
#define SPRD_RTC_MIN_UPD_EN BIT(9)
#define SPRD_RTC_HOUR_UPD_EN BIT(10)
#define SPRD_RTC_DAY_UPD_EN BIT(11)
#define SPRD_RTC_ALMSEC_UPD_EN BIT(12)
#define SPRD_RTC_ALMMIN_UPD_EN BIT(13)
#define SPRD_RTC_ALMHOUR_UPD_EN BIT(14)
#define SPRD_RTC_ALMDAY_UPD_EN BIT(15)
#define SPRD_RTC_INT_MASK GENMASK(15, 0)
#define SPRD_RTC_TIME_INT_MASK \
(SPRD_RTC_SEC_UPD_EN | SPRD_RTC_MIN_UPD_EN | \
SPRD_RTC_HOUR_UPD_EN | SPRD_RTC_DAY_UPD_EN)
#define SPRD_RTC_ALMTIME_INT_MASK \
(SPRD_RTC_ALMSEC_UPD_EN | SPRD_RTC_ALMMIN_UPD_EN | \
SPRD_RTC_ALMHOUR_UPD_EN | SPRD_RTC_ALMDAY_UPD_EN)
#define SPRD_RTC_ALM_INT_MASK \
(SPRD_RTC_SEC_EN | SPRD_RTC_MIN_EN | \
SPRD_RTC_HOUR_EN | SPRD_RTC_DAY_EN | \
SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN)
/* second/minute/hour/day values mask definition */
#define SPRD_RTC_SEC_MASK GENMASK(5, 0)
#define SPRD_RTC_MIN_MASK GENMASK(5, 0)
#define SPRD_RTC_HOUR_MASK GENMASK(4, 0)
#define SPRD_RTC_DAY_MASK GENMASK(15, 0)
/* alarm lock definition for SPRD_RTC_SPG_UPD register */
#define SPRD_RTC_ALMLOCK_MASK GENMASK(7, 0)
#define SPRD_RTC_ALM_UNLOCK 0xa5
#define SPRD_RTC_ALM_LOCK (~SPRD_RTC_ALM_UNLOCK & \
SPRD_RTC_ALMLOCK_MASK)
/* SPG values definition for SPRD_RTC_SPG_UPD register */
#define SPRD_RTC_POWEROFF_ALM_FLAG BIT(8)
#define SPRD_RTC_POWER_RESET_FLAG BIT(9)
/* timeout of synchronizing time and alarm registers (us) */
#define SPRD_RTC_POLL_TIMEOUT 200000
#define SPRD_RTC_POLL_DELAY_US 20000
struct sprd_rtc {
struct rtc_device *rtc;
struct regmap *regmap;
struct device *dev;
u32 base;
int irq;
bool valid;
};
/*
* The Spreadtrum RTC controller has 3 groups registers, including time, normal
* alarm and auxiliary alarm. The time group registers are used to set RTC time,
* the normal alarm registers are used to set normal alarm, and the auxiliary
* alarm registers are used to set auxiliary alarm. Both alarm event and
* auxiliary alarm event can wake up system from deep sleep, but only alarm
* event can power up system from power down status.
*/
enum sprd_rtc_reg_types {
SPRD_RTC_TIME,
SPRD_RTC_ALARM,
SPRD_RTC_AUX_ALARM,
};
static int sprd_rtc_clear_alarm_ints(struct sprd_rtc *rtc)
{
return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
SPRD_RTC_ALM_INT_MASK);
}
static int sprd_rtc_disable_ints(struct sprd_rtc *rtc)
{
int ret;
ret = regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_INT_MASK, 0);
if (ret)
return ret;
return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
SPRD_RTC_INT_MASK);
}
static int sprd_rtc_lock_alarm(struct sprd_rtc *rtc, bool lock)
{
int ret;
u32 val;
ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val);
if (ret)
return ret;
val &= ~(SPRD_RTC_ALMLOCK_MASK | SPRD_RTC_POWEROFF_ALM_FLAG);
if (lock)
val |= SPRD_RTC_ALM_LOCK;
else
val |= SPRD_RTC_ALM_UNLOCK | SPRD_RTC_POWEROFF_ALM_FLAG;
ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_SPG_UPD, val);
if (ret)
return ret;
/* wait until the SPG value is updated successfully */
ret = regmap_read_poll_timeout(rtc->regmap,
rtc->base + SPRD_RTC_INT_RAW_STS, val,
(val & SPRD_RTC_SPG_UPD_EN),
SPRD_RTC_POLL_DELAY_US,
SPRD_RTC_POLL_TIMEOUT);
if (ret) {
dev_err(rtc->dev, "failed to update SPG value:%d\n", ret);
return ret;
}
return 0;
}
static int sprd_rtc_get_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type,
time64_t *secs)
{
u32 sec_reg, min_reg, hour_reg, day_reg;
u32 val, sec, min, hour, day;
int ret;
switch (type) {
case SPRD_RTC_TIME:
sec_reg = SPRD_RTC_SEC_CNT_VALUE;
min_reg = SPRD_RTC_MIN_CNT_VALUE;
hour_reg = SPRD_RTC_HOUR_CNT_VALUE;
day_reg = SPRD_RTC_DAY_CNT_VALUE;
break;
case SPRD_RTC_ALARM:
sec_reg = SPRD_RTC_SEC_ALM_VALUE;
min_reg = SPRD_RTC_MIN_ALM_VALUE;
hour_reg = SPRD_RTC_HOUR_ALM_VALUE;
day_reg = SPRD_RTC_DAY_ALM_VALUE;
break;
case SPRD_RTC_AUX_ALARM:
sec_reg = SPRD_RTC_SEC_AUXALM_UPD;
min_reg = SPRD_RTC_MIN_AUXALM_UPD;
hour_reg = SPRD_RTC_HOUR_AUXALM_UPD;
day_reg = SPRD_RTC_DAY_AUXALM_UPD;
break;
default:
return -EINVAL;
}
ret = regmap_read(rtc->regmap, rtc->base + sec_reg, &val);
if (ret)
return ret;
sec = val & SPRD_RTC_SEC_MASK;
ret = regmap_read(rtc->regmap, rtc->base + min_reg, &val);
if (ret)
return ret;
min = val & SPRD_RTC_MIN_MASK;
ret = regmap_read(rtc->regmap, rtc->base + hour_reg, &val);
if (ret)
return ret;
hour = val & SPRD_RTC_HOUR_MASK;
ret = regmap_read(rtc->regmap, rtc->base + day_reg, &val);
if (ret)
return ret;
day = val & SPRD_RTC_DAY_MASK;
*secs = (((time64_t)(day * 24) + hour) * 60 + min) * 60 + sec;
return 0;
}
static int sprd_rtc_set_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type,
time64_t secs)
{
u32 sec_reg, min_reg, hour_reg, day_reg, sts_mask;
u32 sec, min, hour, day, val;
int ret, rem;
/* convert seconds to RTC time format */
day = div_s64_rem(secs, 86400, &rem);
hour = rem / 3600;
rem -= hour * 3600;
min = rem / 60;
sec = rem - min * 60;
switch (type) {
case SPRD_RTC_TIME:
sec_reg = SPRD_RTC_SEC_CNT_UPD;
min_reg = SPRD_RTC_MIN_CNT_UPD;
hour_reg = SPRD_RTC_HOUR_CNT_UPD;
day_reg = SPRD_RTC_DAY_CNT_UPD;
sts_mask = SPRD_RTC_TIME_INT_MASK;
break;
case SPRD_RTC_ALARM:
sec_reg = SPRD_RTC_SEC_ALM_UPD;
min_reg = SPRD_RTC_MIN_ALM_UPD;
hour_reg = SPRD_RTC_HOUR_ALM_UPD;
day_reg = SPRD_RTC_DAY_ALM_UPD;
sts_mask = SPRD_RTC_ALMTIME_INT_MASK;
break;
case SPRD_RTC_AUX_ALARM:
sec_reg = SPRD_RTC_SEC_AUXALM_UPD;
min_reg = SPRD_RTC_MIN_AUXALM_UPD;
hour_reg = SPRD_RTC_HOUR_AUXALM_UPD;
day_reg = SPRD_RTC_DAY_AUXALM_UPD;
sts_mask = 0;
break;
default:
return -EINVAL;
}
ret = regmap_write(rtc->regmap, rtc->base + sec_reg, sec);
if (ret)
return ret;
ret = regmap_write(rtc->regmap, rtc->base + min_reg, min);
if (ret)
return ret;
ret = regmap_write(rtc->regmap, rtc->base + hour_reg, hour);
if (ret)
return ret;
ret = regmap_write(rtc->regmap, rtc->base + day_reg, day);
if (ret)
return ret;
if (type == SPRD_RTC_AUX_ALARM)
return 0;
/*
* Since the time and normal alarm registers are put in always-power-on
* region supplied by VDDRTC, then these registers changing time will
* be very long, about 125ms. Thus here we should wait until all
* values are updated successfully.
*/
ret = regmap_read_poll_timeout(rtc->regmap,
rtc->base + SPRD_RTC_INT_RAW_STS, val,
((val & sts_mask) == sts_mask),
SPRD_RTC_POLL_DELAY_US,
SPRD_RTC_POLL_TIMEOUT);
if (ret < 0) {
dev_err(rtc->dev, "set time/alarm values timeout\n");
return ret;
}
return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
sts_mask);
}
static int sprd_rtc_read_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
time64_t secs;
u32 val;
int ret;
ret = sprd_rtc_get_secs(rtc, SPRD_RTC_AUX_ALARM, &secs);
if (ret)
return ret;
rtc_time64_to_tm(secs, &alrm->time);
ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val);
if (ret)
return ret;
alrm->enabled = !!(val & SPRD_RTC_AUXALM_EN);
ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val);
if (ret)
return ret;
alrm->pending = !!(val & SPRD_RTC_AUXALM_EN);
return 0;
}
static int sprd_rtc_set_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
time64_t secs = rtc_tm_to_time64(&alrm->time);
int ret;
/* clear the auxiliary alarm interrupt status */
ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
SPRD_RTC_AUXALM_EN);
if (ret)
return ret;
ret = sprd_rtc_set_secs(rtc, SPRD_RTC_AUX_ALARM, secs);
if (ret)
return ret;
if (alrm->enabled) {
ret = regmap_update_bits(rtc->regmap,
rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_AUXALM_EN,
SPRD_RTC_AUXALM_EN);
} else {
ret = regmap_update_bits(rtc->regmap,
rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_AUXALM_EN, 0);
}
return ret;
}
static int sprd_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
time64_t secs;
int ret;
if (!rtc->valid) {
dev_warn(dev, "RTC values are invalid\n");
return -EINVAL;
}
ret = sprd_rtc_get_secs(rtc, SPRD_RTC_TIME, &secs);
if (ret)
return ret;
rtc_time64_to_tm(secs, tm);
return rtc_valid_tm(tm);
}
static int sprd_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
time64_t secs = rtc_tm_to_time64(tm);
u32 val;
int ret;
ret = sprd_rtc_set_secs(rtc, SPRD_RTC_TIME, secs);
if (ret)
return ret;
if (!rtc->valid) {
/*
* Set SPRD_RTC_POWER_RESET_FLAG to indicate now RTC has valid
* time values.
*/
ret = regmap_update_bits(rtc->regmap,
rtc->base + SPRD_RTC_SPG_UPD,
SPRD_RTC_POWER_RESET_FLAG,
SPRD_RTC_POWER_RESET_FLAG);
if (ret)
return ret;
ret = regmap_read_poll_timeout(rtc->regmap,
rtc->base + SPRD_RTC_INT_RAW_STS,
val, (val & SPRD_RTC_SPG_UPD_EN),
SPRD_RTC_POLL_DELAY_US,
SPRD_RTC_POLL_TIMEOUT);
if (ret) {
dev_err(rtc->dev, "failed to update SPG value:%d\n",
ret);
return ret;
}
rtc->valid = true;
}
return 0;
}
static int sprd_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
time64_t secs;
int ret;
u32 val;
/*
* If aie_timer is enabled, we should get the normal alarm time.
* Otherwise we should get auxiliary alarm time.
*/
if (rtc->rtc && rtc->rtc->aie_timer.enabled == 0)
return sprd_rtc_read_aux_alarm(dev, alrm);
ret = sprd_rtc_get_secs(rtc, SPRD_RTC_ALARM, &secs);
if (ret)
return ret;
rtc_time64_to_tm(secs, &alrm->time);
ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val);
if (ret)
return ret;
alrm->enabled = !!(val & SPRD_RTC_ALARM_EN);
ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val);
if (ret)
return ret;
alrm->pending = !!(val & SPRD_RTC_ALARM_EN);
return 0;
}
static int sprd_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
time64_t secs = rtc_tm_to_time64(&alrm->time);
struct rtc_time aie_time =
rtc_ktime_to_tm(rtc->rtc->aie_timer.node.expires);
int ret;
/*
* We have 2 groups alarms: normal alarm and auxiliary alarm. Since
* both normal alarm event and auxiliary alarm event can wake up system
* from deep sleep, but only alarm event can power up system from power
* down status. Moreover we do not need to poll about 125ms when
* updating auxiliary alarm registers. Thus we usually set auxiliary
* alarm when wake up system from deep sleep, and for other scenarios,
* we should set normal alarm with polling status.
*
* So here we check if the alarm time is set by aie_timer, if yes, we
* should set normal alarm, if not, we should set auxiliary alarm which
* means it is just a wake event.
*/
if (!rtc->rtc->aie_timer.enabled || rtc_tm_sub(&aie_time, &alrm->time))
return sprd_rtc_set_aux_alarm(dev, alrm);
/* clear the alarm interrupt status firstly */
ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR,
SPRD_RTC_ALARM_EN);
if (ret)
return ret;
ret = sprd_rtc_set_secs(rtc, SPRD_RTC_ALARM, secs);
if (ret)
return ret;
if (alrm->enabled) {
ret = regmap_update_bits(rtc->regmap,
rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_ALARM_EN,
SPRD_RTC_ALARM_EN);
if (ret)
return ret;
/* unlock the alarm to enable the alarm function. */
ret = sprd_rtc_lock_alarm(rtc, false);
} else {
regmap_update_bits(rtc->regmap,
rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_ALARM_EN, 0);
/*
* Lock the alarm function in case fake alarm event will power
* up systems.
*/
ret = sprd_rtc_lock_alarm(rtc, true);
}
return ret;
}
static int sprd_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct sprd_rtc *rtc = dev_get_drvdata(dev);
int ret;
if (enabled) {
ret = regmap_update_bits(rtc->regmap,
rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN,
SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN);
if (ret)
return ret;
ret = sprd_rtc_lock_alarm(rtc, false);
} else {
regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN,
SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN, 0);
ret = sprd_rtc_lock_alarm(rtc, true);
}
return ret;
}
static const struct rtc_class_ops sprd_rtc_ops = {
.read_time = sprd_rtc_read_time,
.set_time = sprd_rtc_set_time,
.read_alarm = sprd_rtc_read_alarm,
.set_alarm = sprd_rtc_set_alarm,
.alarm_irq_enable = sprd_rtc_alarm_irq_enable,
};
static irqreturn_t sprd_rtc_handler(int irq, void *dev_id)
{
struct sprd_rtc *rtc = dev_id;
int ret;
ret = sprd_rtc_clear_alarm_ints(rtc);
if (ret)
return IRQ_RETVAL(ret);
rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF);
return IRQ_HANDLED;
}
static int sprd_rtc_check_power_down(struct sprd_rtc *rtc)
{
u32 val;
int ret;
ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val);
if (ret)
return ret;
/*
* If the SPRD_RTC_POWER_RESET_FLAG was not set, which means the RTC has
* been powered down, so the RTC time values are invalid.
*/
rtc->valid = (val & SPRD_RTC_POWER_RESET_FLAG) ? true : false;
return 0;
}
static int sprd_rtc_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct sprd_rtc *rtc;
int ret;
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!rtc->regmap)
return -ENODEV;
ret = of_property_read_u32(node, "reg", &rtc->base);
if (ret) {
dev_err(&pdev->dev, "failed to get RTC base address\n");
return ret;
}
rtc->irq = platform_get_irq(pdev, 0);
if (rtc->irq < 0) {
dev_err(&pdev->dev, "failed to get RTC irq number\n");
return rtc->irq;
}
rtc->dev = &pdev->dev;
platform_set_drvdata(pdev, rtc);
/* clear all RTC interrupts and disable all RTC interrupts */
ret = sprd_rtc_disable_ints(rtc);
if (ret) {
dev_err(&pdev->dev, "failed to disable RTC interrupts\n");
return ret;
}
/* check if RTC time values are valid */
ret = sprd_rtc_check_power_down(rtc);
if (ret) {
dev_err(&pdev->dev, "failed to check RTC time values\n");
return ret;
}
ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
sprd_rtc_handler,
IRQF_ONESHOT | IRQF_EARLY_RESUME,
pdev->name, rtc);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request RTC irq\n");
return ret;
}
rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
&sprd_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc))
return PTR_ERR(rtc->rtc);
device_init_wakeup(&pdev->dev, 1);
return 0;
}
static int sprd_rtc_remove(struct platform_device *pdev)
{
device_init_wakeup(&pdev->dev, 0);
return 0;
}
static const struct of_device_id sprd_rtc_of_match[] = {
{ .compatible = "sprd,sc2731-rtc", },
{ },
};
MODULE_DEVICE_TABLE(of, sprd_rtc_of_match);
static struct platform_driver sprd_rtc_driver = {
.driver = {
.name = "sprd-rtc",
.of_match_table = sprd_rtc_of_match,
},
.probe = sprd_rtc_probe,
.remove = sprd_rtc_remove,
};
module_platform_driver(sprd_rtc_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Spreadtrum RTC Device Driver");
MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");