[ARM] Orion: add QNAP TS-409 support
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
This commit is contained in:
Sylver Bruneau
Lennert Buytenhek
parent
a0087f2fcf
commit
47e9cffde6
3 changed files with 392 additions and 0 deletions
|
|
@ -44,6 +44,12 @@ config MACH_LINKSTATION_PRO
|
|||
Buffalo Linkstation Pro/Live platform. Both v1 and
|
||||
v2 devices are supported.
|
||||
|
||||
config MACH_TS409
|
||||
bool "QNAP TS-409"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
QNAP TS-409 platform.
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -5,3 +5,4 @@ obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o
|
|||
obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
|
||||
obj-$(CONFIG_MACH_DNS323) += dns323-setup.o
|
||||
obj-$(CONFIG_MACH_TS209) += ts209-setup.o
|
||||
obj-$(CONFIG_MACH_TS409) += ts409-setup.o
|
||||
|
|
|
|||
385
arch/arm/mach-orion5x/ts409-setup.c
Normal file
385
arch/arm/mach-orion5x/ts409-setup.c
Normal file
|
|
@ -0,0 +1,385 @@
|
|||
/*
|
||||
* QNAP TS-409 Board Setup
|
||||
*
|
||||
* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/serial_reg.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/pci.h>
|
||||
#include <asm/arch/orion5x.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
/*****************************************************************************
|
||||
* QNAP TS-409 Info
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* QNAP TS-409 hardware :
|
||||
* - Marvell 88F5281-D0
|
||||
* - Marvell 88SX7042 SATA controller (PCIe)
|
||||
* - Marvell 88E1118 Gigabit Ethernet PHY
|
||||
* - RTC S35390A (@0x30) on I2C bus
|
||||
* - 8MB NOR flash
|
||||
* - 256MB of DDR-2 RAM
|
||||
*/
|
||||
|
||||
/*
|
||||
* 8MB NOR flash Device bus boot chip select
|
||||
*/
|
||||
|
||||
#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
|
||||
#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
|
||||
|
||||
/****************************************************************************
|
||||
* 8MiB NOR flash. The struct mtd_partition is not in the same order as the
|
||||
* partitions on the device because we want to keep compatability with
|
||||
* existing QNAP firmware.
|
||||
*
|
||||
* Layout as used by QNAP:
|
||||
* [2] 0x00000000-0x00200000 : "Kernel"
|
||||
* [3] 0x00200000-0x00600000 : "RootFS1"
|
||||
* [4] 0x00600000-0x00700000 : "RootFS2"
|
||||
* [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
|
||||
* [5] 0x00760000-0x00780000 : "U-Boot Config"
|
||||
* [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
|
||||
***************************************************************************/
|
||||
static struct mtd_partition qnap_ts409_partitions[] = {
|
||||
{
|
||||
.name = "U-Boot",
|
||||
.size = 0x00080000,
|
||||
.offset = 0x00780000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "Kernel",
|
||||
.size = 0x00200000,
|
||||
.offset = 0,
|
||||
}, {
|
||||
.name = "RootFS1",
|
||||
.size = 0x00400000,
|
||||
.offset = 0x00200000,
|
||||
}, {
|
||||
.name = "RootFS2",
|
||||
.size = 0x00100000,
|
||||
.offset = 0x00600000,
|
||||
}, {
|
||||
.name = "U-Boot Config",
|
||||
.size = 0x00020000,
|
||||
.offset = 0x00760000,
|
||||
}, {
|
||||
.name = "NAS Config",
|
||||
.size = 0x00060000,
|
||||
.offset = 0x00700000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data qnap_ts409_nor_flash_data = {
|
||||
.width = 1,
|
||||
.parts = qnap_ts409_partitions,
|
||||
.nr_parts = ARRAY_SIZE(qnap_ts409_partitions)
|
||||
};
|
||||
|
||||
static struct resource qnap_ts409_nor_flash_resource = {
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = QNAP_TS409_NOR_BOOT_BASE,
|
||||
.end = QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
|
||||
};
|
||||
|
||||
static struct platform_device qnap_ts409_nor_flash = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = { .platform_data = &qnap_ts409_nor_flash_data, },
|
||||
.num_resources = 1,
|
||||
.resource = &qnap_ts409_nor_flash_resource,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* PCI
|
||||
****************************************************************************/
|
||||
|
||||
static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
int irq;
|
||||
|
||||
/*
|
||||
* Check for devices with hard-wired IRQs.
|
||||
*/
|
||||
irq = orion5x_pci_map_irq(dev, slot, pin);
|
||||
if (irq != -1)
|
||||
return irq;
|
||||
|
||||
/*
|
||||
* PCI isn't used on the TS-409
|
||||
*/
|
||||
return -1;
|
||||
}
|
||||
|
||||
static struct hw_pci qnap_ts409_pci __initdata = {
|
||||
.nr_controllers = 2,
|
||||
.swizzle = pci_std_swizzle,
|
||||
.setup = orion5x_pci_sys_setup,
|
||||
.scan = orion5x_pci_sys_scan_bus,
|
||||
.map_irq = qnap_ts409_pci_map_irq,
|
||||
};
|
||||
|
||||
static int __init qnap_ts409_pci_init(void)
|
||||
{
|
||||
if (machine_is_ts409())
|
||||
pci_common_init(&qnap_ts409_pci);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
subsys_initcall(qnap_ts409_pci_init);
|
||||
|
||||
/*****************************************************************************
|
||||
* Ethernet
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv643xx_eth_platform_data qnap_ts409_eth_data = {
|
||||
.phy_addr = 8,
|
||||
};
|
||||
|
||||
static int __init parse_hex_nibble(char n)
|
||||
{
|
||||
if (n >= '0' && n <= '9')
|
||||
return n - '0';
|
||||
|
||||
if (n >= 'A' && n <= 'F')
|
||||
return n - 'A' + 10;
|
||||
|
||||
if (n >= 'a' && n <= 'f')
|
||||
return n - 'a' + 10;
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
static int __init parse_hex_byte(const char *b)
|
||||
{
|
||||
int hi;
|
||||
int lo;
|
||||
|
||||
hi = parse_hex_nibble(b[0]);
|
||||
lo = parse_hex_nibble(b[1]);
|
||||
|
||||
if (hi < 0 || lo < 0)
|
||||
return -1;
|
||||
|
||||
return (hi << 4) | lo;
|
||||
}
|
||||
|
||||
static int __init check_mac_addr(const char *addr_str)
|
||||
{
|
||||
u_int8_t addr[6];
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 6; i++) {
|
||||
int byte;
|
||||
|
||||
/*
|
||||
* Enforce "xx:xx:xx:xx:xx:xx\n" format.
|
||||
*/
|
||||
if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
|
||||
return -1;
|
||||
|
||||
byte = parse_hex_byte(addr_str + (i * 3));
|
||||
if (byte < 0)
|
||||
return -1;
|
||||
addr[i] = byte;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "ts409: found ethernet mac address ");
|
||||
for (i = 0; i < 6; i++)
|
||||
printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
|
||||
|
||||
memcpy(qnap_ts409_eth_data.mac_addr, addr, 6);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The 'NAS Config' flash partition has an ext2 filesystem which
|
||||
* contains a file that has the ethernet MAC address in plain text
|
||||
* (format "xx:xx:xx:xx:xx:xx\n").
|
||||
*/
|
||||
static void __init ts409_find_mac_addr(void)
|
||||
{
|
||||
unsigned long addr;
|
||||
|
||||
for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
|
||||
char *nor_page;
|
||||
int ret = 0;
|
||||
|
||||
nor_page = ioremap(QNAP_TS409_NOR_BOOT_BASE + addr, 1024);
|
||||
if (nor_page != NULL) {
|
||||
ret = check_mac_addr(nor_page);
|
||||
iounmap(nor_page);
|
||||
}
|
||||
|
||||
if (ret == 0)
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
* RTC S35390A on I2C bus
|
||||
****************************************************************************/
|
||||
|
||||
#define TS409_RTC_GPIO 10
|
||||
|
||||
static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
|
||||
I2C_BOARD_INFO("s35390a", 0x30),
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* GPIO Attached Keys
|
||||
* Power button is attached to the PIC microcontroller
|
||||
****************************************************************************/
|
||||
|
||||
#define QNAP_TS409_GPIO_KEY_MEDIA 15
|
||||
|
||||
static struct gpio_keys_button qnap_ts409_buttons[] = {
|
||||
{
|
||||
.code = KEY_RESTART,
|
||||
.gpio = QNAP_TS409_GPIO_KEY_MEDIA,
|
||||
.desc = "USB Copy Button",
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data qnap_ts409_button_data = {
|
||||
.buttons = qnap_ts409_buttons,
|
||||
.nbuttons = ARRAY_SIZE(qnap_ts409_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device qnap_ts409_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &qnap_ts409_button_data,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* General Setup
|
||||
****************************************************************************/
|
||||
static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
|
||||
{ 0, MPP_UNUSED },
|
||||
{ 1, MPP_UNUSED },
|
||||
{ 2, MPP_UNUSED },
|
||||
{ 3, MPP_UNUSED },
|
||||
{ 4, MPP_GPIO }, /* HDD 1 status */
|
||||
{ 5, MPP_GPIO }, /* HDD 2 status */
|
||||
{ 6, MPP_GPIO }, /* HDD 3 status */
|
||||
{ 7, MPP_GPIO }, /* HDD 4 status */
|
||||
{ 8, MPP_UNUSED },
|
||||
{ 9, MPP_UNUSED },
|
||||
{ 10, MPP_GPIO }, /* RTC int */
|
||||
{ 11, MPP_UNUSED },
|
||||
{ 12, MPP_UNUSED },
|
||||
{ 13, MPP_UNUSED },
|
||||
{ 14, MPP_GPIO }, /* SW_RST */
|
||||
{ 15, MPP_GPIO }, /* USB copy button */
|
||||
{ 16, MPP_UART }, /* UART1 RXD */
|
||||
{ 17, MPP_UART }, /* UART1 TXD */
|
||||
{ 18, MPP_UNUSED },
|
||||
{ 19, MPP_UNUSED },
|
||||
{ -1 },
|
||||
};
|
||||
|
||||
/*
|
||||
* QNAP TS-409 specific power off method via UART1-attached PIC
|
||||
*/
|
||||
|
||||
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
|
||||
|
||||
static void qnap_ts409_power_off(void)
|
||||
{
|
||||
/* 19200 baud divisor */
|
||||
const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
|
||||
|
||||
pr_info("%s: triggering power-off...\n", __func__);
|
||||
|
||||
/* hijack uart1 and reset into sane state (19200,8n1) */
|
||||
writel(0x83, UART1_REG(LCR));
|
||||
writel(divisor & 0xff, UART1_REG(DLL));
|
||||
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
|
||||
writel(0x03, UART1_REG(LCR));
|
||||
writel(0x00, UART1_REG(IER));
|
||||
writel(0x00, UART1_REG(FCR));
|
||||
writel(0x00, UART1_REG(MCR));
|
||||
|
||||
/* send the power-off command 'A' to PIC */
|
||||
writel('A', UART1_REG(TX));
|
||||
}
|
||||
|
||||
static void __init qnap_ts409_init(void)
|
||||
{
|
||||
/*
|
||||
* Setup basic Orion functions. Need to be called early.
|
||||
*/
|
||||
orion5x_init();
|
||||
|
||||
orion5x_mpp_conf(ts409_mpp_modes);
|
||||
|
||||
/*
|
||||
* Configure peripherals.
|
||||
*/
|
||||
orion5x_ehci0_init();
|
||||
ts409_find_mac_addr();
|
||||
orion5x_eth_init(&qnap_ts409_eth_data);
|
||||
orion5x_i2c_init();
|
||||
orion5x_uart0_init();
|
||||
|
||||
orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
|
||||
QNAP_TS409_NOR_BOOT_SIZE);
|
||||
platform_device_register(&qnap_ts409_nor_flash);
|
||||
|
||||
platform_device_register(&qnap_ts409_button_device);
|
||||
|
||||
/* Get RTC IRQ and register the chip */
|
||||
if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
|
||||
if (gpio_direction_input(TS409_RTC_GPIO) == 0)
|
||||
qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
|
||||
else
|
||||
gpio_free(TS409_RTC_GPIO);
|
||||
}
|
||||
if (qnap_ts409_i2c_rtc.irq == 0)
|
||||
pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
|
||||
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
|
||||
|
||||
/* register ts409 specific power-off method */
|
||||
pm_power_off = qnap_ts409_power_off;
|
||||
}
|
||||
|
||||
MACHINE_START(TS409, "QNAP TS-409")
|
||||
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
|
||||
.phys_io = ORION5X_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = qnap_ts409_init,
|
||||
.map_io = orion5x_map_io,
|
||||
.init_irq = orion5x_init_irq,
|
||||
.timer = &orion5x_timer,
|
||||
.fixup = tag_fixup_mem32,
|
||||
MACHINE_END
|
||||
Loading…
Reference in a new issue