arm/dts: OMAP3+: Add mpu, dsp and iva nodes

Add nodes for devices used by PM code (mpu, dsp, iva).

Add a cpus node as well as recommended in the DT spec.

Remove mpu, dsp, iva devices init if is populated.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Kevin Hilman <khilman@ti.com>

Documentation/devicetree/bindings/arm/omap/dsp.txt

@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};

Documentation/devicetree/bindings/arm/omap/iva.txt

@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};

arch/arm/boot/dts/omap3.dtsi

@@ -13,12 +13,31 @@
 / {
 	compatible = "ti,omap3430", "ti,omap3";
 
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
 		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
 	};
 
 	/*

arch/arm/boot/dts/omap4.dtsi

@@ -23,12 +23,35 @@
 	aliases {
 	};
 
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
 	 */
 	soc {
 		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		dsp {
+			compatible = "ti,omap3-c64";
+			ti,hwmods = "dsp";
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
 	};
 
 	/*

arch/arm/mach-omap2/pm.c

@@ -215,7 +215,8 @@ static void __init omap4_init_voltages(void)
 
 static int __init omap2_common_pm_init(void)
 {
-	omap2_init_processor_devices();
+	if (!of_have_populated_dt())
+		omap2_init_processor_devices();
 	omap_pm_if_init();
 
 	return 0;